Sie sind auf Seite 1von 1

BIOS Settings Here are the BIOS settings I used for the P5KPL-AM/PS motherboard.

BIOS settings are important to get full sleep, shutdown and restart working. Primary IDE Master: 80 GB Samsung SATA: 500 GB Seagate SATA2: LG DVD ATA/IDE Config: Enhanced Enhanced Mode Support On: S-ATA Onboard PCIE GbE LAN: Disabled (I disabled the onboard LAN because I use a Netgear Wireless USB anyway.) Plug and Play O/S: Yes

Suspend Mode: S3 Only ACPI 2.0 Support: Enabled Restore on AC Power Loss: Power Off Boot Device Priority 1st: HDD Samsung 2nd: DVD LG Partitioning the Drive and Dualbooting with XP Refer to this guide http://wiki.osx86project.org/wiki/index.ph...DualBoot_10.5.2 BUT INSTEAD of Kalyway 10.5.2, substitute it with iDeneb v1.4. You know where to find it. Customize the installation, and check these boxes for this particular setup: ICHX support (because this P5KPL-AM/PS is a G31/ICH7 chipset) nvDarwin 512 mb (for the 9600GT videocard) I didn't check anything for sound, because this is going to be patched later on.

Das könnte Ihnen auch gefallen