Beruflich Dokumente
Kultur Dokumente
http://www.damwand.nl/projects/europe/foundationsolutions/EN/steel_g...
Sitemap
Calculation
NL | EN | FR
Home
Products
About us
References
Information
Steel grades - HP piles Structural steels Mechanical properties according to EN 10025:2004 and corresponding former national standards. Other steel grades can be delivered on request.
Standard referred to: EN 10025:2004 Minimum yield strength R eH Steel grade N/mm
2
Former references Minimum elongation % Thickness (mm) 3 40 26 26 22 22 22 22 22 E 24-3 E 28-2 E 28-3 E 36-2 E 36-3 St 52-3 U St 52-3 N RSt 37-2 St 37-3 U St 44-2 St 44-3 U 40 B 40 C AE 235-C 43 B AE 255-B 43 C AE 255-C 50 B AE 355-B 50 C AE 355-C 50 D AE 355-D NF A 35-501 DIN 17100 BS 4360 NBN A21-101
Steel grades Sheet piles Tubes HP piles AutoCad files Calculation Documentation Service S 235 JRG2 S 235 J0 S 275 JR S 275 J0 S 355 JR S 355 J0 S 355 J2G3/G4
GB
Thickness (mm) 16 235 235 275 275 355 355 355 > 16 40 225 225 265 265 345 345 345
Thickness (mm) 3 100 340-470 340-470 410-560 410-560 490-630 490-630 490-630
High strength steels with high notch thoughness Mechanical properties according to EN 10113-3:1993 and comparable international standards.
Standard referred to: EN 10113-3:1993 Minimum yield strength R eH Steel grade 16 S 355 M S 355 ML S 460 M S 460 ML 355 355 460 460 N/mm
2
Tensile strength R m
N/mm
ASTM
JIS G 3101
22 22 17 17
HISTAR steels High yield strength steels with excellent toughness and outstanding weldability (carbon equivalent lower than 0.41 %). HP piles which are available in HISTAR grades are indicated in this table. Other steel grades can be delivered on request.
HISTAR Comparable international standards
1 of 2
6/1/2012 12:17 PM
http://www.damwand.nl/projects/europe/foundationsolutions/EN/steel_g...
Steel grade
Minimum elongation
Japan
% 22 22 17 17
27 J at 0C. Disclaimer
2 of 2
6/1/2012 12:17 PM