Sie sind auf Seite 1von 3

J esters hat

Jesters Hat
Designed and Created by Tinneke Pot

Illu 1

For this fun project you can use any kind of medium weight cotton fabric, printed, plain. Just mix and match. You will nd templates to download at our web site, www.husqvarnaviking.com.

Sewing Supplies
Husqvarna Viking Huskylock Husqvarna Viking Sewing machine 3/4 yd (70 cm) of cotton fabric 4 cones of overlock thread Sewing thread 3 bells 1 large wooden bead Wadding/Stufng/Fiberll

J esters hat

Diag ram

Husqvarna Viking Accessories Tear Away stabilizer You can nd these and many other accessories in the Husqvarna Viking Accessory Users Guide or on our website www.husqvarnaviking.com, for purchase at your nearest Husqvarna Viking Dealer.
1/4" (6 mm) seam allowance included.

illu 2

CUT
Print out the templates for pattern pieces and cut out. Put the pattern pieces together with Scotch tape matching the markings in the corners, see illustration. Place them on the fabric and cut out 3 pieces. Piece 5 is the pattern piece for the facing, cut 3 of those as well.

Illu 1
KEEPING THE WORLD SEWING

Illu 1

SEW

J esters hat Thread your Huskylock and set it for a 4 thread overlock seam. Place the facing at the lower edge right sides together and sew. Press seam allowance to one side. Repeat for all pieces. Place the pieces wrong sides together and sew the edges together from the lower edge to the cut markings as illustrated, the seams will end up on the right side of the hat. Leave the thread ends at the cut marking. Illustration A.

Diag ram

illu 2

Illu 1

illu 3

Illustration A.

Illu 1
Sew the points together in the same way. Leave the thread ends at the top of each point. Illustration B.

illu 2

illu 2
Illustration B.

illu 3
Thread your sewing machine with sewing thread on top and in the bobbin. Turn under the facing at the lower edge to the wrong side and sew a seam all around close to the edge of the facing. Illustration C. Attach the bells on top of each point using the thread ends. Attach the large bead in the center of the hat in the same way. Put some wadding/stufng/ berll inside the points to make them stand up.

Illustration C.

VSM Group AB SE-561 84 Huskvarna, Sweden www.husqvarnaviking.com

Jesters hat del2 Jesters hat del 5 2


rs Ha Jeste

b c

rs H este J

at,

c
t, 4

Jester Jesters hat del3 hat del1


d d
Jesters Hat, 1

b
Je sH ster at, 3

a b c b
Jesters Hat, 5

d d

Das könnte Ihnen auch gefallen