0 Bewertungen0% fanden dieses Dokument nützlich (0 Abstimmungen)
12 Ansichten1 Seite
Adjustable Premier Series Hinges with Rounded Corners and Beveled Edges. Adjustable Feature Allows for Adjustment of Door Closing Position After Installation Matching Finish Stainless Steel Allen Style Clamp Screws (Phillips screws Available Upon Request) Mouse Ear Design Designed for 3 / 8" and 1 / 2" (10 and 12 mm) glass doors.
Adjustable Premier Series Hinges with Rounded Corners and Beveled Edges. Adjustable Feature Allows for Adjustment of Door Closing Position After Installation Matching Finish Stainless Steel Allen Style Clamp Screws (Phillips screws Available Upon Request) Mouse Ear Design Designed for 3 / 8" and 1 / 2" (10 and 12 mm) glass doors.
Copyright:
Attribution Non-Commercial (BY-NC)
Verfügbare Formate
Als PDF, TXT herunterladen oder online auf Scribd lesen
Adjustable Premier Series Hinges with Rounded Corners and Beveled Edges. Adjustable Feature Allows for Adjustment of Door Closing Position After Installation Matching Finish Stainless Steel Allen Style Clamp Screws (Phillips screws Available Upon Request) Mouse Ear Design Designed for 3 / 8" and 1 / 2" (10 and 12 mm) glass doors.
Copyright:
Attribution Non-Commercial (BY-NC)
Verfügbare Formate
Als PDF, TXT herunterladen oder online auf Scribd lesen
H-PGTWA H-PGTWA-OP H-PGTWA-FP Wall Mount Wall Mount Wall Mount with Short with Offset with “H” Back Plate Back Plate Back Plate
• Adjustable Feature Allows for Adjustment of Door
Closing Position After Installation • Matching Finish Stainless Steel Allen Style Clamp Screws (Phillips Screws Available Upon Request) • Self-Centering 0˚ Return with Adjustment Up to 30° In or Out • Solid Forged Brass Construction Product Code Product Code H-P135GTGA H-P180GTGA • Precision Machined 300 Series Stainless Steel Components 135° Glass-to-Glass 180° Glass-to-Glass • Dual Precision Wound Stainless Steel Return Springs • Self-Closing from 25 Degrees Adjustable Angle Instructions • Mouse Ear Design Steps: • Designed for 3/8" and 1/2" (10 and 12 mm) Glass 1. Use 3 mm Hex Wrench (A) to loosen two screws (B) by turning one circle counter-clockwise. Then proceed with the adjustment. • Wall Mount Hinges Include Matching Finish 2. Once you have aligned the door, re-tighten two screws (B). Stainless Steel Mounting Screws Adjustment Angle • Allen Wrench Included B • Rated at 40 lbs (18 kg) per Hinge Outside 30˚ (Max.)
AVAILABLE IN ALL FINISHES, See Page 3
Glass Door 30˚ (Max.) 3/8" Glass = RATED MAXIMUM MAXIMUM 5.05 lbs/sf (2.29 kg) CAPACITY DOOR WEIGHT DOOR WIDTH Inside A (3 mm Hex 1/2" Glass = 2 Hinges 80 lbs (36 kg) 30" (762 mm) Wrench) 6.40 lbs/sf (2.90 kg) 3 Hinges 120 lbs (54 kg) 36" (914 mm)
Note: Complete the above product codes by adding the desired finish code to the end.