Sie sind auf Seite 1von 2

PS-6120 FP

6 Volt 13.0 AH
Features

Absorbent Glass Mat (AGM) technology for superior


performance
Valve regulated, spill proof construction allows safe
operation in any position
Power/volume ratio yielding unrivaled energy density
Rugged impact resistant ABS case and cover (UL94-HB)
Approved for transport by air. D.O.T., I.A.T.A., F.A.A. and
C.A.B. certified
U.L. recognized under file number MH 20845
Terminals

Performance Specications

(mm)

Nominal Voltage ...........................................................................6 volts (3 cells)

FP - FASTON Polarized

Positive: F2 - Quick
disconnect tabs, 0.250
x 0.032- Mate with AMP.
INC. FASTON 250 series
Negative: F1 - Quick
disconnect tabs, 0.187
x 0.032- Mate with AMP.
INC. FASTON 187 series

F1

Nominal Capacity

F2
3.2

3.4
4.75

6.35

0.8

6.35
7.95

0.8

20-hr.

(650mA to 5.25 volts) ........................................................ 13.00 AH

10-hr.

(1.22A to 5.25 volts) .......................................................... 12.20 AH

5-hr.

(2.21A to 5.10 volts) .......................................................... 11.05 AH

1-hr.

(8A to 4.50 volts) .................................................................. 8.00 AH

15-min. (25.5A to 4.50 volts) .............................................................. 6.38 AH

Physical Dimensions: in (mm)

Approximate Weight ........................................................... 4.80 lbs. (2.18 kg)


Energy Density (20-hr. rate) ................................. 1.18 W-h/in3 (72.20 W-h/l)
Specic Energy (20-hr. rate) ............................. 16.25 W-h/lb (35.83 W-h/kg)

Internal Resistance (approx.) ...................................................... 12 milliohms


Max Discharge Current (7 Min.) ............................................... 36.0 amperes
Max Short-Duration Discharge Current (10 Sec.) ................ 120.0 amperes
Shelf Life (% of nominal capacity at 68F (20C))
1 Month ...................................................................................................... 97%

Sealed Rechargeable
Battery

HT

MODEL PS-6120 FP

BA

ST B E R
MU

Pb

YCL ED
EC

TTE RY

MH20845

Power-Sonic Corporation

3 Months ..................................................................................................... 91%


6 Months .................................................................................................... 83%

6 Volt 13.0 Amp. Hr.

NONSPILLABLE

Operating Temperature Range


Charge .. ........................................................... -4F (-20C) to 122F (50C)
Discharge ....................................................... -40F (-40C) to 140F (60C)

L: 4.25 (108) W: 2.80 (71) H: 5.55 (141) HT: 5.55 (141)

Case ...................................................................................................... ABS Plastic

Tolerances are +/- 0.04 in. (+/- 1mm) and +/- 0.08 in. (+/- 2mm) for
height dimensions. All data subject to change without notice.

Power-Sonic Chargers .................................................PSC-61000A, 61000A-C

To ensure safe and efcient operation always refer to the latest edition of our Technical Manual, as published on our website.
All data subject to change without notice.

www.power-sonic.com

PS-6120 FP 6 Volt 13.0 AH

Discharge Characteristics

100

Charging is not
necessary unless
100% of capacity
is required.

80

Charging before
use is necessary
to help recover
full capacity.

5oC
(41oF)

60
o

30 C
o
(86 F)

40oC
(104oF)

40
0

7.0

10

Charge may fail


to restore full
capacity. Do not
let batteries reach
this state.

20oC
(68oF)
12

14

16

18

20

6.0
5.5
5.0
4.5

2.4

12

24 36 48 1

Discharge Time

4 6 8 10

20 4 0

Life Characteristics in Stand-By Use

Retention Capacity (%)

13

min

20
15
10
Discharge Time

0.65

26

1.2

Discharge Time vs. Discharge Current

1.3

2.6

6.5

Final
Voltage

4.0

Standing Period (Months)

Ambient Temperature 20 C (68 F)

6.5

Terminal Voltage (V)

Capacity Retention Ratio (%)

Shelf Life & Storage

Final
Voltage
5.25V

5.10V

1
4.80V

min

30

4.50V

10
5

4.05V

0.65

1.3

2.6

6.5

13

80
60

20
0

Note: Due to the self-discharge characteristics of this type of battery, it is


imperative that they be charged within 6 months of storage, otherwise permanent
loss of capacity might occur as a result of sulfation.

Chargers

Life Characteristics in Cyclic Use


120

Retention Capacity (%)

Discharge Current (A)

Float or Stand-By Service: Hold battery across constant voltage source of


6.75 to 6.90 volts continuously. When held at this voltage, the battery will seek its
own current level and maintain itself in a fully charged condition.

Years

26

Cycle Applications: Limit initial current to 3.9A. Charge until battery voltage
(under charge) reaches 7.20 to 7.35 volts at 68F (20C). Hold at 7.20 to 7.35
volts until current drops to under 130mA. Battery is fully charged under these
conditions, and charger should be disconnected or switched to float voltage.

Float Charging Voltage


2.25 - 2.30 V/Cell

40

40 C (104 F)
o
o
20 C (68 F)
o
o
0 C (32 F)

Charging

Ambient Temperature 20C (68F)

100

100
80
60

Discharge
Depth 100%

Discharge
Depth 50%

Discharge
Depth 30%

40
1. Discharge Current 0.2C (Final Voltage 1.7V/Cell)
2. Charge Current: 0.1C
3. Ambient Temperature: 20oC to 25oC (68oF to 77oF)

20
0

200

400

600

800

1000

1200

Number of Cycles

Further Information

Power-Sonic offers a wide range of chargers suitable for batteries up to 100AH.


Please refer to the Charger Selection Guide in our specification sheets for C-Series
Switch Mode Chargers and Transformer Type A and F Series. Please contact our
Technical department for advice if you have difficulty in locating suitable models.

Please refer to our website www.power-sonic.com for a complete range of useful


downloads, such as product catalogs, material safety data sheets (MSDS), ISO
certification, etc..

Contact Information
DOMESTIC SALES
Tel: +1-619-661-2020
Fax: +1-619-661-3650
national-sales@power-sonic.com

www.power-sonic.com
CUSTOMER SERVICE
Tel: +1-619-661-2030
Fax: +1-619-661-3648
customer-service@power-sonic.com

TECHNICAL SUPPORT
Tel: +1-619-661-2020
Fax: +1-619-661-3648
support@power-sonic.com

INTERNATIONAL SALES
Tel: +1-650-364-5001
Fax: +1-650-366-3662
international-sales@power-sonic.com

CORPORATE OFFICE 7550 Panasonic Way San Diego, CA 92154 USA Tel: +1-619-661-2020 Fax: +1-619-661-3650
2011. Power-Sonic Corporation. All rights reserved. All trademarks are the property of their respective owners.

0211 1M

Das könnte Ihnen auch gefallen