Beruflich Dokumente
Kultur Dokumente
CONNECTION DIAGRAM
BUILT IN BOP
RESTORING TO DEFAULTS
P0010
Commissioning parameter
P0100
50/60Hz selection
Rated motor voltage[V] Rated motor current[A] Rated motor power [KW/Hp]
P0311[0] P0700[0..2]
Range 040000 =0(Factory default setting) =1(Operator panel) =2(Terminal) =5(USS/MODBUS on RS485) Range 077(factory default 1) =0(no main set point) =1(MOP set point) =2(analog set point) =3(fixed frequency) =5(USS on RS485) =7(analog set point 2)
Range 0599(factory default=0)
P1000[0]
P1080[0]
Minimum frequency[Hz]
P3900
End of commissioning Note: After completion of calculation, P3900 and P0010 are automatically reset to their original value 0. The inverter displays "8.8.8.8.8" which indicates that it is busy with internal data processing.
=0(no quick commissioning)-factory default =1(end of quick commissioning with factory reset) =2(end quick commissioning) =3(end of quick commissioning only for motor data)
P0700[1]-OPERATOR PANEL
Start Stop Multi-function button Hand/jog/auto Forward and reverse motor direction Speed up and speed down motor
PO700[2]-TERMINALS
Parameter P0701[0...2] Description Function of digital input 1 Range 0 - 99 Factory default 0 Acc. level 2
0
1 2 3 4
16
17 18 22 23
Fault acknowledge
24
PO700[2]- TERMINALS
Parameter Description 9 10 11 12 Range Fault acknowledge JOG right JOG left Reverse Factory default 24 25 27 29 Acc. level Quick stop override DC brake enable Enable PID External trip
13
33
14
99
15
PO700[2]- TERMINALS
Parameter P0702[0...2] Description Function of digital input 2 Range 0 - 99 Fa0ctory defa0ult 0 Acc. level 2
P0703[0...2]
P0704[0...2] P0712 [0...2] P0713[0...2]
0 - 99
0 - 99 0 - 99 0 - 99
9
15 0 0
2
2 2 2
ANALOG PARAMETERS
P1000=2(Analog set point)
Analog operation through BOP(P0700=1) P1000=12(analog set point + MOP set point) P1000=21(MOP set point + analog set point) Analog operation through Terminals(P0700=2) P1000=23(fixed frequency + analog set point)
MACROS
DEFINITION:
CONNECTION MACRO
APPLICATION MACROS
Ease of Use
Energy consumption monitoring Automatic restart Parameter cloning USS/MODBUS communication Connection and application macro Customized default values
APPLICATION
Hibernation mode Slip compensation Keep running mode Kinetic buffering Flying start Motor staging BICO function Dual ramp Wobble function PID Controller Super torque mode Hammer start Blockage clearing mode
THANK YOU