Beruflich Dokumente
Kultur Dokumente
Open Now, Huawei eNSP beta testing! Help you to become IP expert!
eNSP (Enterprise Network Simulation Platform) is Huawei's latest, completely free network simulator, which can not only simulate single router & switch device, but also large network.
From Aug16 to Sep15, eNSP beta testing will begin in global public. Please download following attachments to get eNSP beta version. Welcome to join and give your suggestions!
Dwnload these 4 .rar files, just extract the fist file(*.part1.rar) to a folder, then install it. If there aren't WinPcap and Wireshark software on your computer, please install them first.
[ Last edited by k61335 2012-10-19 11:05:51 Edit ] Attaches: Enterprise_Network_Simulator_V100R001C00_Setup.part1.rar ( 23.84 MB ,851 downs ) Attaches: Enterprise_Network_Simulator_V100R001C00_Setup.part2.rar ( 23.84 MB ,1011 downs ) Attaches: Enterprise_Network_Simulator_V100R001C00_Setup.part3.rar ( 23.84 MB ,953 downs ) Attaches: Enterprise_Network_Simulator_V100R001C00_Setup.part4.rar ( 11.33 MB ,1064 downs )
Attaches: WinPcap_4_1_2.zip ( 874.81 KB ,580 downs ) Attaches: wireshark-win32-1.4.3.zip ( 18.32 MB ,508 downs ) Attaches: eNSP_Help.zip ( 11.27 MB ,752 downs )
Favorite 2 Share 0 Dig8 Reply Quote
Reply Quote
Could you describe the details about the operations when you encouter this problem?
Reply Quote
Hi everyone,
After installing the software successfully, When I use the software, for example, start the router CLI screen is shown loading the router but my MS windows informs that the application must be terminated, and stay indefinitely. I've tried on WindowsXP SP3 and Windows 7 SP1, all 32bits, problem is same.
Reply Quote
Reply 5 # Can you provide the screenshot when the error occurs?
Reply Quote
Hi Sr. g00211126, Yes I am posting the error, but the messages are in Portuguese, The translation is "The eNSP_DEVICE.EXE stopped working" and "Look for solution online and close the program" or "Close Program".
If I close this box after a few seconds it is shown again. Below is the screenshot of the screen with the detail of the error.
Reply Quote
Thank you for your feedback,we are trying to solve this problem.
Reply Quote
Reply 7 # hi hk47jr we have made it clear what is the cause of the problem. you need to open the command line window as administrator,and then input command " lodctr /r ". this command used to reset the counter in your system. please contact with me if it still will not work. [ Last edited by g00211126 2012-08-28 10:25:52 Edit ]
Reply Quote
Hi,
is it possible that your eNSP simulation utility dosnt work on windows 7 x64-bit systems??
i am sending a screenshot with the error (in german) and Visual studio in the background with was started in debug mode because the crash of eNSP:Device.exe...
i guess that is because i am using the 64-bit version of windows 7 but i have no possibilitys to test it with an 32-bit version right now. please check that and inform me.
eNSP seams to become a good tool whats remainds me on cisco pacet tracer but with the possibility of connecting a real network interface and sending real packages it could become much powerful.
Please fix the error end add some nice features like
- DHCP client at virtual computers - automatic arp resolv of mac addresses - simulated web server and clients (just as much as packet tracer)
greetings treaki
Reply Quote
congratulation, the huawei forum is sizing the picture down to much, you can find the full sized picture here:
http://treaki.tk/~treaki/120822_eNSP_not_working.png
I would like to tell good news, but I'm not have, the test did not work.
Reply 12 #
please note the red marked part. some other people in china, solve the problem by this solution.
Reply Quote
Quote 13 # hi treaki, it does not matter with 64-bit version of windows 7. please refer to following configure.
please note the red marked part. some other people in china, solve the problem by this solution.
Reply Quote
Hi! It finally worked for me with the same error: the thing is that you have to type the command several times (4 times for me) from the moment of starting your device (I close the pop up window everytime it appears, don't know if it really helps, but it works).
Reply Quote
Reply 16 # hi g00729363, i'm sorry, ar1220 does not support LLDP currently. we will record this defect. thank you for your feedback.
Reply Quote
Reply 15 # technically,you just need to type the command once. maybe you need to close the eNSP first, and then type the command in the command line window as administrator. at last, restart the eNSP.
Reply Quote
I type command and I received same result of windows, like your red marked. I think the problem should be a set of factors such as dll version or version of winpcap or language or so.
Type the command " lodctr /r " before, during or after the eNSP I had the same problem.
In windows 7 environment presents this message of successfully, the environment windowsXP I received another the message, but the problem is the same, continues to request the closure of the program. I know it may seem impossible, because in your environment is working, but see that the problem is occurring with several users (in different languages of windows). I am available to help you in testing and remedy the problem. I'm sure that this tool will bring up the expected benefits surpassing all and any competition. I await your return on this case. thank you
Reply Quote
Hi Sr. g00211126,
I type command and I received same result of windows, like your red marked. I think the problem should be a set of factors such as dll version or version of winpcap or language or so.
Type the command " lodctr /r " before, during or after the eNSP I had the same problem. In windows 7 environment presents this message of successfully, the environment windowsXP I received another the message, but the problem is the same, continues to request the closure of the program. I know it may seem impossible, because in your environment is working, but see that the problem is occurring with several users (in different languages of windows). I am available to help you in testing and remedy the problem. I'm sure that this tool will bring up the expected benefits surpassing all and any competition. I await your return on this case. thank you
Reply Quote
g00211126
Reply 22 # please type the command "lodctr /r:PerfStringBackup.ini",if your environment is windows xp
Reply Quote
example topologies after install are unpacked into chinese-named folders, also the .topo files use chinese letters. please, use english in the future releases.
Reply Quote
.topo files should be mapped in registry to be opened with the eNSP program.
Reply Quote
Very goog job This simulator will be very usefulll for me because I work as an Networking Instructor her in Chile.
I run it on Windows Vista and I works perfect. In Windoes 7 64 bit the software craches. The same problem of other people in this forum. Until now I have not enter the command suggested.
I also installed it on Win XP SP3 virtual machine and the program run well but I cant launch Wireshark when I start a packet capture. I have been searching for the Wireshark path in the e NSP but with no success. Any ideas???
1you need to install wireshark in you virtual machine,we did not take it in the eNSP. 2i am so sorry, we have not found the reason which crashes in the windows 7 64bit environment.
Very goog job This simulator will be very usefulll for me because I work as an Networking Instructor her in Chile.
I run it on Windows Vista and I works perfect. In Windoes 7 64 bit the software craches. The same problem of other people in this forum. Until now I have not enter the command suggested.
I also installed it on Win XP SP3 virtual machine and the program run well but I cant launch Wireshark when I start a packet capture. I have been searching for the Wireshark path in the e NSP but with no success. Any ideas???
Reply Quote
mbeain
Of course, Wireshark is installed in the Virtual machine itself. I reinstalled it, and also reinstalled eNSP but in the virtual machine, when I start a capture, wirechark is not launched. It is a Windows XP SP3 virtual machine. Very strange. Thanks.
Reply Quote
Any plan to add more routers and switches to the platform? I mean new type of routers (8090) and switches (s9300).
Reply Quote
Hi,
I have the same problem with eNSP that other people. I start the program but windows says there is a problem an the program will close.
I've try the solution loctdr /r, and it works parcially, because i have to do it at the same time that the router is starting, and i have to do the same with every router in the topology.
Do you have a total solution for this issue? I know is a beta simulator, but i think this is a big bug!
i wonder how people can use eNSP, all my collegues have the same problem as me. when i start the program windows says that the program has a problem and will close. the solution lodctr /r only works sometimes and i have to type all the time the same command in cmd for every router in the topology.
anybody using windows 7 can run the simulator without any problem?
Reply Quote
Quote 33 # you should type the command in the user mode.please check it.
Reply Quote
r00700062
S5700 switch After inputing command "traffic-statistic inbound acl name test1" program crashing.
Reply Quote
I did all your suggestions and everything wroten in this site..but I cant work ensp:(( I tried on windows 7 and also vista but its not working.what s wrong I dont understand..
Reply Quote
Last news from huawei support is "we are working very hard to fix the program crashing issue" I have the same problem, when i start the program windows says "the program will close" etc, but i wonder how people can run the program without any problem beacuse they are asking about some features or some commands. it's seem that ther problem only occur in certains windows stations, i don't know.
We are waiting for the solution in order to try the simulator, because now a days i can't start the devices.
Reply Quote
g00211126
Quote 36 # hi, we have resolved the problem in the next version. S5700 switch After inputing command "traffic-statistic inbound acl name test1" program crashing.
r00700062 Post On 2012-08-31 16:23:10
Reply Quote
35 you should type the command in the user mode.please check it.
what I am asking is after we execute this command, there is no entry listed, actually there should be.