Parameter Reference

eNodeB V100R005C00
Parameter Reference
Issue Date 01 2012/05/11
HUAWEI TECHNOLOGIES CO., LTD.
Copyright Huawei Technologies Co., Ltd. 2012. All rights reserved.

No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd.
Trademarks and Permissions

and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective holders.
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part o products, services and features described in this document may not be within the purchase scope or the usage scope. Unless other specified in the contract, all statements, information, and recommendations in this document are provided "AS IS" without warrantie guarantees or representations of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the preparation of this documen ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute a warrant kind, express or implied.
Huawei Technologies Co., Ltd.

Address: Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China http://www.huawei.com support@huawei.com
Website: Email:
ans without prior written consent of Huawei
their respective holders.
etween Huawei and the customer. All or part of the chase scope or the usage scope. Unless otherwise cument are provided "AS IS" without warranties,
been made in the preparation of this document to ns in this document do not constitute a warranty of any
Purpose
This document describes the MO parameters of eNodeB. For the details about the parameters rela parameter list.
Intended Audience
This document is intended for: Network planners System engineers Field engineers Shift operators Site maintainers Network operators
Parameter Attribute Description

The following table describes the attributes of each parameter. Parameter Attribute MO Parameter ID Parameter Name NE MML Command Meaning IsKey Mandatory Dynamic Attribute Feature ID Feature Name Value Type GUI Value Range Enumeration Number/Bit Unit Actual Value Range
Default Value
Recommended Value
Initial Value Source
Impact Parameter Relationship Access Service Interrupted After Modification Interruption Scope Interruption Duration (min) Caution Validation of Modification Impact on Radio Network Performance Introduced in Version Attribute
Change History
For detailed parameter changes, see the release notes.
Issue 03 02 01 Draft B Draft A Date 2012/5/11 2012/4/28 2012/3/30 2012/2/15 2012/1/10
cribes the MO parameters of eNodeB. For the details about the parameters related to northbound interface interconnection, see
e Description
describes the attributes of each parameter. Description Managed object of NE. A simple character string used for identifying a parameter. Name of a parameter. NEs on which the parameter is set. Man Machine Language (MML) command related to the parameter. Definition, purpose, and protocols of the parameter. Whether the parameter is used to identify an MO instance. Whether the parameter is mandatory for creating an MO instance. Whether the parameter is dynamic for an MO. If the parameter is not dynamic, it can be added, modified, or removed; if the parameter is dynamic, it cannot. ID of the feature that uses the parameter. Name of the feature that uses the parameter. Type of a parameter value. Range of the parameter values displayed on the GUI. Enumeration number corresponding to the GUI value of a parameter of the enumeration type, or Unit of a parameter value displayed on the GUI. Range of the actual values corresponding to the parameter values displayed on the GUI. Initial value assigned by the system for a parameter. For a mandatory parameter, no default value is available. For a bit field parameter, if the value of a sub-parameter is ON, the bit representing the sub-parameter is set to 1; if the value of a sub-parameter is OFF, the bit representing the subparameter is set to 0. None indicates that no default value is available. Generally, it is displayed on the configuration window of an ADD command but not displayed on the configuration window of a MOD/RMV/DSP/LST command. Parameter values recommended for different scenarios.
Source for the initial configuration of a parameter. The initial value source can be: Radio planning (Internal planning): The parameter value comes from the radio network plan, facilitating resource management on the NE. Radio planning (Negotiation with the peer): The parameter value comes from the radio network plan. The NE negotiates this value with the peer device to ensure successful interworking. Transport planning (Internal planning): The parameter value comes from the transport network plan, facilitating resource management on the NE. Transport planning (Negotiation with the peer): The parameter value comes from the transport network plan. The NE negotiates this value with the peer device to ensure successful interworking. Equipment planning: The parameter value comes from the equipment plan. Engineering design: The parameter value comes from the algorithm or function design. Default/recommended value: The parameter value uses the default or recommended value, where the recommended value is preferential. The default/recommended value can be used in most scenarios and adjusted for a specific scenario. N/A: The parameter value is not required. Parameter impact scope. Relationship with other parameters. For example, to use this parameter, you need to set related Whether this parameter is Read & Write or Read Only. If a parameter is not dynamic and is read only, it can be set only when the MO is created and cannot be modified later. To modify the parameter, you must delete the MO first and then create it again. Whether modifying the parameter value interrupts the ongoing services. Possible interruption scope. Possible interruption duration (unit: minute). Cautions to be taken during the modification. How this parameter takes effect and whether the equipment needs to be restarted after the Impact of the parameter on radio network performance. Product version in which the parameter is introduced. Whether the parameter is a radio parameter, a transport parameter, or an equipment parameter.
eter changes, see the release notes.

Description This is the third official release. This is the second official release. This is the first official release. This is the draft. This is the draft.
t the parameters related to northbound interface interconnection, see the
fying a parameter.
nd related to the parameter. parameter. fy an MO instance. r creating an MO instance. n MO. If the parameter is not dynamic, it can be added, s dynamic, it cannot. r. meter.
d on the GUI. he GUI value of a parameter of the enumeration type, or he GUI. ng to the parameter values displayed on the GUI. a parameter. For a mandatory parameter, no default value he value of a sub-parameter is ON, the bit representing e of a sub-parameter is OFF, the bit representing the subat no default value is available. ation window of an ADD command but not displayed on V/DSP/LST command.
erent scenarios.
arameter. The initial value source can be: parameter value comes from the radio network plan, e NE. er): The parameter value comes from the radio network the peer device to ensure successful interworking. The parameter value comes from the transport network on the NE. e peer): The parameter value comes from the transport lue with the peer device to ensure successful
ue comes from the equipment plan. ue comes from the algorithm or function design. meter value uses the default or recommended value, ential. The default/recommended value can be used in fic scenario. d.
example, to use this parameter, you need to set related e or Read Only. If a parameter is not dynamic and is read created and cannot be modified later. To modify the and then create it again. interrupts the ongoing services.
ute). ation. ether the equipment needs to be restarted after the rk performance.
is introduced. meter, a transport parameter, or an equipment parameter.
MO
Parameter ID
Parameter Name
NE
MML Command ADD BFANT DSP BFANT LST BFANT MOD BFANT RMV BFANT ADD BFANT MOD BFANT DSP BFANT LST BFANT ADD BFANT MOD BFANT DSP BFANT LST BFANT ADD BFANT MOD BFANT DSP BFANT LST BFANT ADD BFANT MOD BFANT DSP BFANT LST BFANT ADD BFANT MOD BFANT DSP BFANT LST BFANT ADD BFANT MOD BFANT DSP BFANT LST BFANT ADD BFANT MOD BFANT DSP BFANT LST BFANT ADD BFANT MOD BFANT LST BFANT
BFANT
DEVICENO
Device No.
eNodeB
BFANT
CONNCN
Connect RRU cabinet No.
eNodeB
BFANT
CONNSRN
Connect RRU subrack No.
eNodeB
BFANT
CONNSN
Connect RRU slot No.
eNodeB
BFANT
MODELNO
Antenna model number
eNodeB
BFANT
TILT
Tilt
eNodeB
BFANT
BEAMWIDTH
Beamwidth
eNodeB
BFANT
Band
Band
eNodeB
BFANT
TYPE
Antenna Type
eNodeB
BFANT
POLARMODE
Polar Mode
eNodeB
DSP BFANT
BFANT
ELMTBMWTH
Element Beamform eNodeB Width
None
BFANT
AntPortNum
Number of Port
eNodeB
DSP BFANT
BFANT
CRS2Amp1
Amplitude Offset of Physical Port 1 for eNodeB CRS2
DSP BFANT
BFANT
CRS2Pha1
Phase of Physical Port 1 for CRS2
eNodeB
DSP BFANT
BFANT
CRS2Amp2
DSP BFANT
BFANT
CRS2Pha2
eNodeB
DSP BFANT
BFANT
CRS2Amp3
DSP BFANT
BFANT
CRS2Pha3
eNodeB
DSP BFANT
BFANT
CRS2Amp4
DSP BFANT
BFANT
CRS2Pha4
eNodeB
DSP BFANT
BFANT
CRS4Amp1
DSP BFANT
BFANT
CRS4Pha1
eNodeB
DSP BFANT
BFANT
CRS4Amp2
DSP BFANT
BFANT
CRS4Pha2
eNodeB
DSP BFANT
eNodeB
ENODEBID
eNodeB ID
eNodeB
MOD ENODEB DSP ENODEB LST ENODEB
eNodeB
NAME
eNodeB name
eNodeB
MOD ENODEB LST ENODEB
eNodeB
ENBTYPE
eNodeB type
eNodeB
eNodeB
AUTOPOWEROFF Auto power control SWITCH switch
eNodeB
eNodeB
POWEROFFTIME
Auto power off time eNodeB
eNodeB
POWERONTIME
Auto power on time eNodeB
eNodeB
LONGITUDE
Longitude
eNodeB
eNodeB
LATITUDE
Latitude
eNodeB
eNodeB
ElectriSerialNo
Electronic Serial Number
eNodeB
DSP ENODEB
eNodeB
LicenseState
LicenseState
eNodeB
DSP ENODEB
eNodeB
AutoPoweroffStatus
eNodeB eNodeB autopoweroff status
DSP ENODEB
eNodeB
LOCATION
Site Location
eNodeB
eNodeB
GCDF
Geo-coordinate data format
eNodeB
eNodeB
LATITUDESECFO RMAT
Latitude with second format
eNodeB
eNodeB
LONGITUDESECF Longitude with ORMAT second format
eNodeB
eNodeB
PROTOCOL
Protocol Type
eNodeB
KPIALARM
KPITYPE
KPITYPE
eNodeB
LST KPIALARM MOD KPIALARM
KPIALARM
REPORTSWITCH
Report Switch
eNodeB
MOD KPIALARM LST KPIALARM
KPIALARM
FLTTHRESHOLD
FltThreshold
eNodeB
KPIALARM
RESTHRESHOLD
ResThreshold
eNodeB
KPIALARM
MINCHECKTIMES MinCheckTimes
eNodeB
KPIALARM
DETECTPERIOD
DetectPeriod
eNodeB
KPIALARM
DETECTBEGINTIM DetectBeginTime E
eNodeB
KPIALARM
DETECTPERIODN DetectPeriodNum UM
eNodeB
MOD KPIALARM LST KPIALARM ADD SECTOR DSP SECTOR LST SECTOR MOD SECTOR RMV SECTOR
Sector
SECN
Sector No.
eNodeB
Sector
LONGITUDE
Longitude
eNodeB
ADD SECTOR MOD SECTOR LST SECTOR
Sector
LATITUDE
Latitude
eNodeB
Sector
ANTM
Antenna mode
eNodeB
Sector
SECM
Sector mode
eNodeB
Sector
COMBM
CombMode
eNodeB
Sector
CN1
Cabinet No. of the RRU where antenna port 1 is located
eNodeB
Sector
SRN1
Subrack No. of the RRU where antenna port 1 is located
eNodeB
Sector
SN1
Slot No. of the RRU where antenna port eNodeB 1 is located
Sector
PN1
Port No. of antenna eNodeB connector 1
Sector
CN2
Cabinet No. of the RRU where antenna port 2 is located Subrack No. of the RRU where antenna port 2 is located
eNodeB
Sector
SRN2
eNodeB
Sector
SN2
Sector
PN2
Sector
CN3
eNodeB
Sector
SRN3
eNodeB
Sector
SN3
Sector
PN3
Sector
CN4
eNodeB
Sector
SRN4
eNodeB
Sector
SN4
Sector
PN4
Sector
CN5
eNodeB
Sector
SRN5
eNodeB
Sector
SN5
Sector
PN5
Sector
CN6
eNodeB
Sector
SRN6
eNodeB
Sector
SN6
Sector
PN6
Sector
CN7
eNodeB
Sector
SRN7
eNodeB
Sector
SN7
Sector
PN7
Sector
CN8
eNodeB
Sector
SRN8
eNodeB
Sector
SN8
Sector
PN8
Sector
CN9
eNodeB
Sector
SRN9
eNodeB
Sector
SN9
Sector
PN9
Sector
CN10
eNodeB
Sector
SRN10
eNodeB
Sector
SN10
Sector
PN10
Sector
CN11
eNodeB
Sector
SRN11
eNodeB
Sector
SN11
Sector
PN11
Sector
CN12
eNodeB
Sector
SRN12
eNodeB
Sector
SN12
Sector
PN12
Sector
SECTORNAME
Sector name
eNodeB
Sector
ALTITUDE
Altitude
eNodeB
Sector
UNCERTSEMIMAJ UncertSemiMajor OR
eNodeB
Sector
UNCERTSEMIMIN UncertSemiMinor OR
eNodeB
Sector
ORIENTOFMAJOR OrientOfMajorAxis AXIS
eNodeB
Sector
UNCERTALTITUD UncertAltitude E
eNodeB
Sector
CONFIDENCE
Confidence
eNodeB
Sector
GCDF
Geo-coordinate data format
eNodeB
ADD SECTOR MOD SECTOR LST SECTOR ADD SECTOR MOD SECTOR LST SECTOR
Sector
ANTLATITUDESEC Antenna latitude FORMAT with second format
eNodeB
Sector
ANTLONGITUDES Antenna longitude ECFORMAT with second format
eNodeB
Sector
OMNIFLAG
Omni Mode
eNodeB
Sector
CN13
eNodeB
Sector
SRN13
eNodeB
Sector
SN13
Sector
PN13
Sector
CN14
eNodeB
Sector
SRN14
eNodeB
Sector
SN14
Sector
PN14
Sector
CN15
eNodeB
Sector
SRN15
eNodeB
Sector
SN15
Sector
PN15
Sector
CN16
eNodeB
Sector
SRN16
eNodeB
Sector
SN16
Sector
PN16
Sector
MaxTxPower
Maximum transmit power of each TX channel
eNodeB
DSP SECTOR
Sector
LicState
License state
eNodeB
DSP SECTOR
Sector
RXFrequencyRange
RX Frequency Range
eNodeB
DSP SECTOR
Sector
TXFrequencyRange
TX Frequency Range
eNodeB
DSP SECTOR
WEBLOGINPOLICY POLICY
WebLMT Login Policy
eNodeB
SET WEBLOGINPOLIC Y LST WEBLOGINPOLIC Y
ALD
DEVICENO
Device No.
eNodeB
DLD ALDSW DSP ALDVER RST ALD
ALD
RtmVendorCode
Actual Vendor Code eNodeB
None
ALD
RtmDeviceSerialNo
Actual Device Serial eNodeB No.
DSP ALDVER
ALD
DEVICENAME
Device Name
eNodeB
DSP ALDVER
ALD
CTRLCN
Control Port Cabinet No.
eNodeB
DLD ALDSW DLD RETCFGDATA DSP ALDVER RST ALD SCN ALD
ALD
CTRLSRN
Control Port Subrack No.
eNodeB
ALD
CTRLSN
Control Port Slot No.
eNodeB
ALD
ProtocolVersion
Protocol Version
eNodeB
DSP ALDVER
ALD
RtmTotalSubunitNu Actual Subunit m Number
eNodeB
None
ALD
VENDORCODE
Vendor Code
eNodeB
None
ALD
SERIALNO
Serial No.
eNodeB
None
ALD
HardwareVersion
Hardware Version
eNodeB
DSP ALDVER
ALD
SoftwareVersion
Software Version
eNodeB
DSP ALDVER
ALD
DeviceModel
Device Model
eNodeB
DSP ALDVER
ALD
DeviceType
Device Type
eNodeB
DSP ALDVER
ALD
CtrlPortNo
Control Port No.
eNodeB
None
AntennaPort
CN
Cabinet No.
eNodeB
DSP ANTENNAPORT LST ANTENNAPORT MOD ANTENNAPORT
AntennaPort
SRN
Subrack No.
eNodeB
AntennaPort
SN
Slot No.
eNodeB
AntennaPort
PN
Port No.
eNodeB
DSP ANTENNAPORT LST ANTENNAPORT MOD ANTENNAPORT MOD ANTENNAPORT LST ANTENNAPORT
AntennaPort
FEEDERLENGTH
Feeder Length
eNodeB
AntennaPort
DLDELAY
TMA Downlink Delay
eNodeB
MOD ANTENNAPORT LST ANTENNAPORT
AntennaPort
DUDELAY
TMA Uplink Delay
eNodeB
AntennaPort
PWRSWITCH
ALD Power Switch
eNodeB
AntennaPort
Current Alarm THRESHOLDTYPE Threshold Type
eNodeB
AntennaPort
UOTHD
Undercurrent Alarm eNodeB Occur Threshold
AntennaPort
UCTHD
Undercurrent Alarm eNodeB Clear Threshold
AntennaPort
OOTHD
Overcurrent Alarm Occur Threshold
eNodeB
AntennaPort
OCTHD
Overcurrent Alarm Clear Threshold
eNodeB
AntennaPort
ALDCurrValue
ALD Current Value eNodeB
DSP ANTENNAPORT DSP ANTENNAPORT ADD RET MOD RET MOD RETTILT LST RET
AntennaPort
ALDRtmPwrSwitch
ALD Actual Power Switch
eNodeB
RET
RETTYPE
RET Type
eNodeB
RET
POLARTYPE
Polar Type
eNodeB
ADD RET MOD RET LST RET
RET
SCENARIO
Antenna Scenario
eNodeB
RET
SUBUNITNUM
RET Subunit Number
eNodeB
ADD RET MOD RET LST RET None ADD RET DSP RET LST RET MOD RET RMV RET DSP RET
RET
RETCLASS
RET Class
eNodeB
RET
DEVICENO
Device No.
eNodeB
RET
RtmVendorCode
RET
RtmDeviceSerialNo
DSP RET
RET
DEVICENAME
Device Name
eNodeB
RET
CTRLCN
eNodeB
ADD RET MOD RET DSP RET LST RET
RET
CTRLSRN
eNodeB
RET
CTRLSN
eNodeB
RET
ProtocolVersion
Protocol Version
eNodeB
None
RET
eNodeB
DSP RET
RET
VENDORCODE
Vendor Code
eNodeB
RET
SERIALNO
Serial No.
eNodeB
RET
HardwareVersion
Hardware Version
eNodeB
None
RET
SoftwareVersion
Software Version
eNodeB
None
RET
DeviceModel
Device Model
eNodeB
None
RET
DeviceType
Device Type
eNodeB
None
RET
CtrlPortNo
Control Port No.
eNodeB
DSP RET
RetDeviceData
DEVICENO
Device No.
eNodeB
DSP RETDEVICEDATA LST RETDEVICEDATA MOD RETDEVICEDATA
RetDeviceData
SUBUNITNO
Subunit No.
eNodeB
DSP RETDEVICEDATA LST RETDEVICEDATA MOD RETDEVICEDATA
RetDeviceData
BEARING
Antenna Bearing
eNodeB
MOD RETDEVICEDATA DSP RETDEVICEDATA LST RETDEVICEDATA MOD RETDEVICEDATA DSP RETDEVICEDATA LST RETDEVICEDATA
RetDeviceData
MODELNO
Antenna Model Number
eNodeB
RetDeviceData
BSID
Base Station ID
eNodeB
MOD RETDEVICEDATA DSP RETDEVICEDATA LST RETDEVICEDATA
RetDeviceData
BEAMWIDTH1
Beamwidth1
eNodeB
MOD RETDEVICEDATA LST RETDEVICEDATA
RetDeviceData
BEAMWIDTH2
Beamwidth2
eNodeB
RetDeviceData
BEAMWIDTH3
Beamwidth3
eNodeB
RetDeviceData
BEAMWIDTH4
Beamwidth4
eNodeB
RetDeviceData
GAIN1
Gain1
eNodeB
MOD RETDEVICEDATA LST RETDEVICEDATA MOD RETDEVICEDATA LST RETDEVICEDATA MOD RETDEVICEDATA LST RETDEVICEDATA MOD RETDEVICEDATA LST RETDEVICEDATA MOD RETDEVICEDATA DSP RETDEVICEDATA LST RETDEVICEDATA MOD RETDEVICEDATA DSP RETDEVICEDATA LST RETDEVICEDATA MOD RETDEVICEDATA DSP RETDEVICEDATA LST RETDEVICEDATA
RetDeviceData
GAIN2
Gain2
eNodeB
RetDeviceData
GAIN3
Gain3
eNodeB
RetDeviceData
GAIN4
Gain4
eNodeB
RetDeviceData
DATE
Installation Date
eNodeB
RetDeviceData
TILT
Installed Mechanical Tilt
eNodeB
RetDeviceData
INSTALLERID
Installer's ID
eNodeB
RetDeviceData
BAND1
Band1
eNodeB
RetDeviceData
BAND2
Band2
eNodeB
RetDeviceData
BAND3
Band3
eNodeB
RetDeviceData
BAND4
Band4
eNodeB
RetDeviceData
SECTORID
Sector ID
eNodeB
MOD RETDEVICEDATA DSP RETDEVICEDATA LST RETDEVICEDATA MOD RETDEVICEDATA DSP RETDEVICEDATA LST RETDEVICEDATA DSP RETDEVICEDATA
RetDeviceData
SERIALNO
Antenna Serial No. eNodeB
RetDeviceData
MaxTilt
Max Tilt
eNodeB
RetDeviceData
MinTilt
Min Tilt
eNodeB
DSP RETDEVICEDATA
RetDeviceData
RtmOpBandCodes1 Band1
eNodeB
DSP RETDEVICEDATA
RetDeviceData
eNodeB
DSP RETDEVICEDATA
RetDeviceData
eNodeB
DSP RETDEVICEDATA
RetDeviceData
eNodeB
DSP RETDEVICEDATA
RetDeviceData
RtmBeamWidth1
Beamwidth1
eNodeB
DSP RETDEVICEDATA
RetDeviceData
RtmBeamWidth2
Beamwidth2
eNodeB
DSP RETDEVICEDATA
RetDeviceData
RtmBeamWidth3
Beamwidth3
eNodeB
DSP RETDEVICEDATA
RetDeviceData
RtmBeamWidth4
Beamwidth4
eNodeB
DSP RETDEVICEDATA
RetDeviceData RetDeviceData RetDeviceData RetDeviceData
RtmGainValue1 RtmGainValue2 RtmGainValue3 RtmGainValue4
Gain1 Gain2 Gain3 Gain4
eNodeB eNodeB eNodeB eNodeB
DSP RETDEVICEDATA DSP RETDEVICEDATA DSP RETDEVICEDATA DSP RETDEVICEDATA DSP RETPORT LST RETPORT MOD RETPORT DSP RETPORT LST RETPORT MOD RETPORT
RetPort
CN
Cabinet No.
eNodeB
RetPort
SRN
Subrack No.
eNodeB
RetPort
SN
Slot No.
eNodeB
DSP RETPORT LST RETPORT MOD RETPORT
RetPort
PN
Port No.
eNodeB
DSP RETPORT LST RETPORT MOD RETPORT
RetPort
PWRSWITCH
ALD Power Switch
eNodeB
MOD RETPORT LST RETPORT
RetPort
THRESHOLDTYPE
Current Alarm Threshold
eNodeB
RetPort
UOTHD
Undercurrent Alarm eNodeB Occur Threshold
RetPort
UCTHD
Undercurrent Alarm eNodeB Clear Threshold
RetPort
OOTHD
Overcurrent Alarm Occur Threshold
eNodeB
RetPort
OCTHD
Overcurrent Alarm Clear Threshold
eNodeB
RetPort
ALDCurrValue
ALD Current Value eNodeB
DSP RETPORT
RetPort
ALDRtmPwrSwitch
ALD Actual Power Switch
eNodeB
DSP RETPORT CLB RET DLD RETCFGDATA DSP RETSUBUNIT LST RETSUBUNIT MOD RETSUBUNIT CLB RET DLD RETCFGDATA DSP RETSUBUNIT LST RETSUBUNIT MOD
RETSubunit
DEVICENO
Device No.
eNodeB
RETSubunit
SUBUNITNO
Subunit No.
eNodeB
RETSubunit
Status
Online Status
eNodeB
DSP RETSUBUNIT
RETSubunit
RtmTilt
Actual Tilt
eNodeB
DSP RETSUBUNIT
RETSubunit
RtmSectorId
Sector Id
eNodeB
DSP RETSUBUNIT
RETSubunit
CONNCN1
Connect Port 1 Cabinet No.
eNodeB
MOD RETSUBUNIT LST RETSUBUNIT
RETSubunit
CONNSRN1
Connect Port 1 Subrack No.
eNodeB
RETSubunit
CONNSN1
Connect Port 1 Slot eNodeB No.
RETSubunit
CONNPN1
Connect Port 1 Port eNodeB No.
RETSubunit
CONNCN2
Connect Port 2 Cabinet No.
eNodeB
RETSubunit
CONNSRN2
Connect Port 2 Subrack No.
eNodeB
RETSubunit
CONNSN2
Connect Port 2 Slot eNodeB No.
RETSubunit
CONNPN2
Connect Port 2 Port eNodeB No.
RETSubunit
TILT
Tilt
eNodeB
MOD RETSUBUNIT MOD RETTILT LST RETSUBUNIT
RETSubunit
AER
Tilt Alarm Error Range
eNodeB
MOD RETSUBUNIT LST RETSUBUNIT MOD RETSUBUNIT MOD RETTILT LST RETSUBUNIT ADD TMA MOD TMA LST TMA ADD TMA DSP TMA LST TMA MOD TMA RMV TMA DSP TMA
RETSubunit
SUBNAME
Subunit Name
eNodeB
TMA
SUBUNITNUM
TMA Subunit Number
eNodeB
TMA
DEVICENO
Device No.
eNodeB
TMA
RtmVendorCode
TMA
RtmDeviceSerialNo
DSP TMA
TMA
DEVICENAME
Device Name
eNodeB
ADD TMA MOD TMA LST TMA
TMA
CTRLCN
eNodeB
ADD TMA MOD TMA DSP TMA LST TMA
TMA
CTRLSRN
eNodeB
TMA
CTRLSN
eNodeB
TMA
ProtocolVersion
Protocol Version
eNodeB
None
TMA
eNodeB
DSP TMA
TMA
VENDORCODE
Vendor Code
eNodeB
TMA
SERIALNO
Serial No.
eNodeB
TMA
HardwareVersion
Hardware Version
eNodeB
None
TMA
SoftwareVersion
Software Version
eNodeB
None
TMA
DeviceModel
Device Model
eNodeB
None
TMA
DeviceType
Device Type
eNodeB
None
TMA
CtrlPortNo
Control Port No.
eNodeB
DSP TMA
TMADeviceData
DEVICENO
Device No.
eNodeB
DSP TMADEVICEDATA LST TMADEVICEDATA MOD TMADEVICEDATA DSP TMADEVICEDATA LST TMADEVICEDATA MOD TMADEVICEDATA MOD TMADEVICEDATA DSP TMADEVICEDATA LST TMADEVICEDATA MOD TMADEVICEDATA DSP TMADEVICEDATA LST TMADEVICEDATA
TMADeviceData
SUBUNITNO
Subunit No.
eNodeB
TMADeviceData
BEARING
Antenna Bearing
eNodeB
TMADeviceData
BSID
Base Station ID
eNodeB
TMADeviceData
BEAMWIDTH1
Beamwidth1
eNodeB
MOD TMADEVICEDATA LST TMADEVICEDATA
TMADeviceData
BEAMWIDTH2
Beamwidth2
eNodeB
TMADeviceData
BEAMWIDTH3
Beamwidth3
eNodeB
TMADeviceData
BEAMWIDTH4
Beamwidth4
eNodeB
TMADeviceData
GAIN1
Gain1
eNodeB
MOD TMADEVICEDATA LST TMADEVICEDATA MOD TMADEVICEDATA LST TMADEVICEDATA MOD TMADEVICEDATA LST TMADEVICEDATA MOD TMADEVICEDATA LST TMADEVICEDATA MOD TMADEVICEDATA DSP TMADEVICEDATA LST TMADEVICEDATA
TMADeviceData
GAIN2
Gain2
eNodeB
TMADeviceData
GAIN3
Gain3
eNodeB
TMADeviceData
GAIN4
Gain4
eNodeB
TMADeviceData
DATE
Installation Date
eNodeB
TMADeviceData
TILT
Installed Mechanical Tilt
eNodeB
MOD TMADEVICEDATA DSP TMADEVICEDATA LST TMADEVICEDATA MOD TMADEVICEDATA DSP TMADEVICEDATA LST TMADEVICEDATA
TMADeviceData
INSTALLERID
Installer's ID
eNodeB
TMADeviceData
BAND1
Band1
eNodeB
TMADeviceData
BAND2
Band2
eNodeB
TMADeviceData
BAND3
Band3
eNodeB
TMADeviceData
BAND4
Band4
eNodeB
TMADeviceData
SECTORID
Sector ID
eNodeB
MOD TMADEVICEDATA DSP TMADEVICEDATA LST TMADEVICEDATA MOD TMADEVICEDATA DSP TMADEVICEDATA LST TMADEVICEDATA MOD TMADEVICEDATA DSP TMADEVICEDATA LST TMADEVICEDATA DSP TMADEVICEDATA
TMADeviceData
SERIALNO
Serial No.
eNodeB
TMADeviceData
MODELNO
Connect Antenna Model Number
eNodeB
TMADeviceData
MaxSupportedGain
Max Supported Gain
eNodeB
TMADeviceData
MinSupportedGain
Min Supported Gain eNodeB
DSP TMADEVICEDATA
TMADeviceData
RtmTmaSubunitTyp Real Subunit type e
eNodeB
DSP TMADEVICEDATA
TMADeviceData
RtmTmaGainResol Real Gain ution Resolution
eNodeB
DSP TMADEVICEDATA
TMADeviceData
RtmOpBandCode1 Band1
eNodeB
DSP TMADEVICEDATA
TMADeviceData
eNodeB
DSP TMADEVICEDATA
TMADeviceData
eNodeB
DSP TMADEVICEDATA
TMADeviceData
eNodeB
DSP TMADEVICEDATA
TMADeviceData
RtmBeamWidth1
Beamwidth1
eNodeB
DSP TMADEVICEDATA
TMADeviceData
RtmBeamWidth2
Beamwidth2
eNodeB
DSP TMADEVICEDATA
TMADeviceData
RtmBeamWidth3
Beamwidth3
eNodeB
DSP TMADEVICEDATA
TMADeviceData
RtmBeamWidth4
Beamwidth4
eNodeB
DSP TMADEVICEDATA
TMADeviceData TMADeviceData
RtmGainValue1 RtmGainValue2
Gain1 Gain2
eNodeB eNodeB
DSP TMADEVICEDATA DSP TMADEVICEDATA
RtmGainValue3 RtmGainValue4
Gain3 Gain4
eNodeB eNodeB
DSP TMADEVICEDATA DSP TMADEVICEDATA
TMADeviceData
RtmTmaRxMinFreB Real Received Min eNodeB and Frequency Band
DSP TMADEVICEDATA
TMADeviceData
RtmTmaTxMaxFreB Real Transmit Max eNodeB and Frequency Band
DSP TMADEVICEDATA
TMADeviceData
RtmTmaTxMinFreB Real Transmit Min and Frequency Band
eNodeB
DSP TMADEVICEDATA
TMADeviceData
RtmTmaRxMaxFre Real Received Max eNodeB Band Frequency Band
DSP TMADEVICEDATA
TMASubunit
DEVICENO
Device No.
eNodeB
TMASubunit
SUBUNITNO
Subunit No.
eNodeB
DSP TMASUBUNIT LST TMASUBUNIT MOD TMASUBUNIT DSP TMASUBUNIT LST TMASUBUNIT MOD TMASUBUNIT DSP TMASUBUNIT
TMASubunit
RtmSectorId
Actual Sector ID
eNodeB
TMASubunit
RtmGain
Actual Gain
eNodeB
DSP TMASUBUNIT
TMASubunit
RtmMode
Actual Mode
eNodeB
DSP TMASUBUNIT
TMASubunit
Status
Online Status
eNodeB
DSP TMASUBUNIT
TMASubunit
CONNPN
Connect Port No.
eNodeB
MOD TMASUBUNIT LST TMASUBUNIT
TMASubunit
CONNCN
Connect Port Cabinet No.
eNodeB
TMASubunit
CONNSN
Connect Port Slot No.
eNodeB
TMASubunit
CONNSRN
Connect Port Subrack No.
eNodeB
TMASubunit
GAIN
Gain
eNodeB
TMASubunit
MODE
Mode
eNodeB
VAntennaPort
CONNCN
Cabinet No.
eNodeB
None
VAntennaPort
CONNSRN
Subrack No.
eNodeB
None
VAntennaPort
CONNSN
Slot No.
eNodeB
None
VAntennaPort
PN
Port No.
eNodeB
None
VRET
DEVICENO
Device No.
eNodeB
LST VRET MOD VRET
VRET
CONNCN
Cabinet No.
eNodeB
LST VRET
VRET
CONNSRN
Subrack No.
eNodeB
LST VRET
VRET
CONNSN
Slot No.
eNodeB
LST VRET
VRET
DEVICENAME
Device Name
eNodeB
MOD VRET LST VRET
VRET
SUBUNITQUANTIT Subunit Quantity Y
eNodeB
MOD VRET LST VRET
VRETSubunit
CONNCN
Cabinet No.
eNodeB
None
VRETSubunit
CONNPN1
Connected Port 1
eNodeB
MOD VRETSUBUNIT DSP VRETSUBUNIT LST VRETSUBUNIT
VRETSubunit
CONNPN2
Connected Port 2
eNodeB
VRETSubunit
SUBNAME
Device Name
eNodeB
MOD VRETSUBUNIT LST VRETSUBUNIT DSP VRETSUBUNIT LST VRETSUBUNIT MOD VRETSUBUNIT MOD VRETSUBUNIT DSP VRETSUBUNIT LST VRETSUBUNIT
VRETSubunit
DEVICENO
Device No.
eNodeB
VRETSubunit
POLARTYPE1
Polar Type1
eNodeB
VRETSubunit
CONNSN
Slot No.
eNodeB
None
VRETSubunit
CONNSRN
Subrack No.
eNodeB
None
VRETSubunit
SUBUNITNO
Subunit No.
eNodeB
DSP VRETSUBUNIT LST VRETSUBUNIT MOD VRETSUBUNIT
VRETSubunit
CONNPN3
Connected Port 3
eNodeB
VRETSubunit
POLARTYPE2
Polar Type2
eNodeB
VRETSubunit
DLTILT
Downlink Tilt
eNodeB
VRETSubunit
ULTILT
Uplink Tilt
eNodeB
VRETSubunit
CONNPN4
Connected Port 4
eNodeB
VRETSubunit
POLARTYPE3
Polar Type3
eNodeB
MOD VRETSUBUNIT DSP VRETSUBUNIT LST VRETSUBUNIT MOD VRETSUBUNIT DSP VRETSUBUNIT LST VRETSUBUNIT
VRETSubunit
POLARTYPE4
Polar Type4
eNodeB
VRETSubunit
PORTNUM
PORTNUM
eNodeB
MOD VRETSUBUNIT ADD CTRLLNK LST CTRLLNK MOD CTRLLNK RMV CTRLLNK ADD CTRLLNK DSP CTRLLNKSTAT MOD CTRLLNK LST CTRLLNK ADD CTRLLNK DSP CTRLLNKSTAT MOD CTRLLNK LST CTRLLNK
CTRLLNK
LN
Local Link No.
eNodeB
CTRLLNK
CN
Local Cabinet No.
eNodeB
CTRLLNK
SRN
Local Subrack No.
eNodeB
CTRLLNK
SN
Local Slot No.
eNodeB
ADD CTRLLNK DSP CTRLLNKSTAT MOD CTRLLNK LST CTRLLNK ADD CTRLLNK MOD CTRLLNK LST CTRLLNK
CTRLLNK
UPCN
Upper Cabinet No.
eNodeB
CTRLLNK
UPSRN
Upper Subrack No. eNodeB
ADD CTRLLNK MOD CTRLLNK LST CTRLLNK
CTRLLNK
UPSN
Upper Slot No.
eNodeB
CTRLLNK
UPPT
Upper Port No.
eNodeB
CTRLLNK
PT
Port No.
eNodeB
DSP CTRLLNKSTAT
CTRLLNK
TIMESTART
Measurement Start eNodeB Time
DSP CTRLLNKSTAT
CTRLLNK
ONEDAYERRPKG 1 Day Error NUM Package Number
eNodeB
DSP CTRLLNKSTAT
CTRLLNK
ONEDAYERRPKG 1 Day Error RATE Package Rate
eNodeB
DSP CTRLLNKSTAT
CTRLLNK
ONEDAYERRLOS RATE
1 Day LOS Rate
eNodeB
DSP CTRLLNKSTAT
CTRLLNK
ONEDAYERRLOST 1 Day LOS time IME
eNodeB
DSP CTRLLNKSTAT
CTRLLNK
ONEHOURERRPK 1 Hour Error GNUM Package Number
eNodeB
DSP CTRLLNKSTAT
CTRLLNK
ONEHOURERRPK 1 Hour Error GRATE Package Rate
eNodeB
DSP CTRLLNKSTAT
CTRLLNK
ONEHOURERRLO 1 Hour LOS Rate SRATE
eNodeB
DSP CTRLLNKSTAT
CTRLLNK
ONEHOURERRLO 1 Hour LOS Time STIME
eNodeB
DSP CTRLLNKSTAT
CTRLLNK
ONEWEEKERRPK 1 Week Error GNUM Package Number
eNodeB
DSP CTRLLNKSTAT
CTRLLNK
ONEWEEKERRPK 1 Week Error GRATE Package Rate
eNodeB
DSP CTRLLNKSTAT
CTRLLNK
ONEWEEKERRLO 1 Week LOS Rate SRATE
eNodeB
DSP CTRLLNKSTAT
CTRLLNK
ONEWEEKERRLO 1 Week LOS time STIME
eNodeB
DSP CTRLLNKSTAT
CTRLLNK
TOTALERRPKGNU Total Error Package eNodeB M Number
DSP CTRLLNKSTAT
CTRLLNK
TOTALLOSTIME
Total LOS Time
eNodeB
DSP CTRLLNKSTAT
CTRLLNK
TOTALTSTIME
Total Measurement eNodeB Time
DSP CTRLLNKSTAT
CTRLLNK
TOTALRXPKGNU M
Total Receive Package Number
eNodeB
DSP CTRLLNKSTAT
BITS
BN
BITS Clock No.
eNodeB
ADD BITS DSP BITS MOD BITS RMV BITS LST BITS
BITS
CN
Cabinet No.
eNodeB
ADD BITS LST BITS
BITS
SRN
Subrack No.
eNodeB
ADD BITS LST BITS
BITS
SN
Slot No.
eNodeB
ADD BITS LST BITS
BITS
ActiveState
Link Active State
eNodeB
DSP BITS
BITS
AvailableState
Link Available State eNodeB
DSP BITS
BITS
PRI
Priority
eNodeB
ADD BITS MOD BITS LST BITS
LineClk
LN
Line Clock No.
eNodeB
ADD LINECLK DSP LINECLK MOD LINECLK RMV LINECLK LST LINECLK
LineClk
CN
Cabinet No.
eNodeB
ADD LINECLK LST LINECLK
LineClk
SRN
Subrack No.
eNodeB
LineClk
SN
Slot No.
eNodeB
LineClk
PN
Port No.
eNodeB
ADD LINECLK DSP LINECLK LST LINECLK
LineClk
ActiveState
Link Active State
eNodeB
DSP LINECLK
LineClk
AvailableState
DSP LINECLK
LineClk
PRI
Priority
eNodeB
ADD LINECLK MOD LINECLK LST LINECLK
PeerClk
PN
Peer Clock No.
eNodeB
ADD PEERCLK DSP PEERCLK RMV PEERCLK LST PEERCLK
PeerClk
PS
Peer Standard
eNodeB
ADD PEERCLK LST PEERCLK
PeerClk
ActiveState
Link Active State
eNodeB
DSP PEERCLK
PeerClk
AvailableState
DSP PEERCLK
TOD
TN
TOD Clock No.
eNodeB
ADD TOD DSP TOD MOD TOD RMV TOD LST TOD
TOD
TYPE
TOD Type
eNodeB
ADD TOD DSP TOD LST TOD
TOD
CN
Cabinet No.
eNodeB
ADD TOD LST TOD
TOD
SRN
Subrack No.
eNodeB
ADD TOD LST TOD
TOD
SN
Slot No.
eNodeB
ADD TOD LST TOD
TOD
CABLETYPE
Cable Type
eNodeB
ADD TOD MOD TOD LST TOD
TOD
CABLE_LEN
Cable Length
eNodeB
TOD
ActiveState
Link Active State
eNodeB
DSP TOD
TOD
AvailableState
DSP TOD
TOD
DELAY
Delay
eNodeB
DSP TOD
TOD
PRI
Priority
eNodeB
GPS
GN
GPS Clock No.
eNodeB
ADD GPS DSP GPS MOD GPS RMV GPS RST SATCARD LST GPS
GPS
CN
Cabinet No.
eNodeB
ADD GPS LST GPS
GPS
SRN
Subrack No.
eNodeB
ADD GPS LST GPS
GPS
SN
Slot No.
eNodeB
ADD GPS LST GPS
GPS
WPOS
Way to Get Position eNodeB
MOD GPSPOS LST GPSPOS
GPS
LONG
Antenna Longitude eNodeB
MOD GPSPOS DSP GPS LST GPSPOS
GPS
LAT
Antenna Latitude
eNodeB
GPS
ALT
Antenna Altitude
eNodeB
GPS
AGL
Antenna Angle
eNodeB
GPS
DELAY
Feeder Delay
eNodeB
DSP GPS
GPS
DURATION
Duration
eNodeB
GPS
PRECISION
Precision
eNodeB
GPS
CABLETYPE
Cable Type
eNodeB
ADD GPS MOD GPS LST GPS
GPS
CABLE_LEN
Cable Length
eNodeB
GPS
GpsVersion
GPS Version
eNodeB
DSP GPS
GPS
PosFix
GPS Position Fixed eNodeB
DSP GPS
GPS
Almnac
Almanac Validity
eNodeB
DSP GPS
GPS
PosSolu
Position Solution
eNodeB
DSP GPS
GPS
FixPos
Fixed Position
eNodeB
DSP GPS
GPS
ClkSteer
Clock Steering
eNodeB
DSP GPS
GPS
ClkMode
Clock Model Validity eNodeB
DSP GPS
GPS
GlonassNum
GLONASS Satellites Traced
eNodeB
DSP GPS
GPS
GpsCardState
GPS Card State
eNodeB
DSP GPS
GPS
GpsCardType
GPS Card Type
eNodeB
DSP GPS
GPS
GpsNum
GPS Satellites Traced
eNodeB
DSP GPS
GPS
MODE
GPS Work Mode
eNodeB
ADD GPS MOD GPS DSP GPS LST GPS
GPS
CompassNum
COMPASS Satellites Traced
eNodeB
DSP GPS
GPS
ActiveState
Link Active State
eNodeB
DSP GPS
GPS
PRI
Priority
eNodeB
IPCLKLNK
LN
IP Clock No.
eNodeB
ADD IPCLKLINK DSP IPCLKLINK DSP PRICLASS RMV IPCLKLINK SET CLASSIDENTIFY SET PRICLASS LST IPCLKLINK LST PRICLASS
IPCLKLNK
ICPT
Protocol Type
eNodeB
ADD IPCLKLINK LST IPCLKLINK
IPCLKLNK
CN
Cabinet No.
eNodeB
IPCLKLNK
SRN
Subrack No.
eNodeB
IPCLKLNK
SN
Slot No.
eNodeB
IPCLKLNK
CIP
Client IPv4
eNodeB
ADD IPCLKLINK DSP IPCLKLINK LST IPCLKLINK
IPCLKLNK
SIP
Server IPv4
eNodeB
IPCLKLNK
DM
Domain
eNodeB
IPCLKLNK
DELAYTYPE
Delay Type
eNodeB
IPCLKLNK
CLASSIDENTIFY
Priority Clock Class eNodeB Identify Flag
SET CLASSIDENTIFY DSP PRICLASS
IPCLKLNK
CLASS0
Priority Clock Class0
eNodeB
SET PRICLASS DSP PRICLASS LST PRICLASS
IPCLKLNK
CLASS1
eNodeB
IPCLKLNK
CLASS2
eNodeB
IPCLKLNK
CLASS3
eNodeB
IPCLKLNK
CurClass
Current Priority Clock Class
eNodeB
DSP PRICLASS
IPCLKLNK
MACMODE
Clock Source Specified or Not
eNodeB
IPCLKLNK
CLKMAC
Clock Source MAC eNodeB Address
IPCLKLNK
ActiveState
Link Active State
eNodeB
DSP IPCLKLINK
IPCLKLNK
AvailableState
DSP IPCLKLINK
IPCLKLNK
CNM
Clock Net Mode
eNodeB
IPCLKLNK
CMPST
Compensation
eNodeB
IPCLKLNK
StepMode
Step Mode
eNodeB
DSP IPCLKLINK
IPCLKLNK
VlanId
VLAN ID
eNodeB
DSP IPCLKLINK
IPCLKLNK
UtcOffset
UTC Offset
eNodeB
None
IPCLKLNK
PRI
Priority
eNodeB
IPCLKLNK
ANNFREQ
Announce Freq
eNodeB
IPCLKLNK
SYNCFREQ
Sync Freq
eNodeB
IPCLKLNK
MASTERPRIO
Master Priority
eNodeB
IPCLKLNK
PROFILETYPE
Profile Type
eNodeB
IPCLKLNK
NEGDURATION
Negotiate Duration
eNodeB
IPCLKLNK
IPMODE
IP mode
eNodeB
IPCLKLNK
CIPV6
Client IPv6
eNodeB
IPCLKLNK
SIPV6
Server IPv6
eNodeB
SyncEth
LN
SyncEth Clock No.
eNodeB
ADD SYNCETH DSP SYNCETH MOD SYNCETH RMV SYNCETH LST SYNCETH
SyncEth
CN
Cabinet No.
eNodeB
ADD SYNCETH LST SYNCETH
SyncEth
SRN
Subrack No.
eNodeB
SyncEth
SN
Slot No.
eNodeB
SyncEth
PN
Port No.
eNodeB
SyncEth
SSM
SSM Selection
eNodeB
ADD SYNCETH MOD SYNCETH DSP SYNCETH LST SYNCETH
SyncEth
ActiveState
Link Active State
eNodeB
DSP SYNCETH
SyncEth
AvailableState
DSP SYNCETH
SyncEth
PRI
Priority
eNodeB
ADD SYNCETH MOD SYNCETH LST SYNCETH
Tasm
AvailableState
Clock Source State eNodeB
DSP CLKSRC
Tasm
LicenseAuthorized
License Authorized eNodeB
DSP CLKSRC
Tasm
PRI
Clock Source Priority
eNodeB
DSP CLKSRC
Tasm
SRCNO
Clock Source No.
eNodeB
SET CLKMODE DSP CLKSRC LST CLKMODE
Tasm
CLKSRC
Selected Clock Source
eNodeB
SET CLKMODE LST CLKMODE
Tasm
MODE
Clock Working Mode
eNodeB
SET CLKMODE DSP CLKSTAT LST CLKMODE
Tasm
CLKSYNCMODE
Clock Synchronization Mode
eNodeB
SET CLKSYNCMODE DSP CLKSTAT LST CLKSYNCMODE
Tasm
CurrentSrcStatus
Current Clock Source State
eNodeB
DSP CLKSTAT
Tasm
PllStatus
PLL Status
eNodeB
DSP CLKRECORD DSP CLKSTAT DSP CLKTST
Tasm
CurrentSrc
Current Clock Source
eNodeB
DSP CLKSTAT
Tasm
CN
Cabinet No.
eNodeB
DSP CLKDA DSP CLKRECORD DSP CLKSTAT DSP CLKTHD DSP CLKTST DSP DARECORD DSP TSTCLKOUT MOD CENTERDA MOD CURRDA SET CLKTHD SET TSTCLKOUT STP CLKTST STR CLKTST DSP CLKDA DSP CLKRECORD DSP CLKSTAT DSP CLKTHD DSP CLKTST DSP DARECORD DSP TSTCLKOUT MOD CENTERDA MOD CURRDA SET CLKTHD SET TSTCLKOUT STP CLKTST STR CLKTST DSP CLKDA DSP CLKRECORD DSP CLKSTAT DSP CLKTHD DSP CLKTST DSP DARECORD DSP TSTCLKOUT MOD CENTERDA MOD CURRDA SET CLKTHD SET TSTCLKOUT STP CLKTST STR CLKTST
Tasm
SRN
Subrack No.
eNodeB
Tasm
SN
Slot No.
eNodeB
Tasm
QL
Quality Level
eNodeB
SET LOCALCLKQL DSP SYNCETH LST LOCALCLKQL
BBP
CN
Cabinet No.
eNodeB
LST BBP MOD BBP
BBP
SRN
Subrack No.
eNodeB
LST BBP MOD BBP
BBP
SN
Slot No.
eNodeB
LST BBP MOD BBP
BBP
TYPE
Board Type
eNodeB
None
BBP
WM
Work Mode
eNodeB
ADD BRD MOD BBP LST BBP
BBP
AdmState
Administrative state eNodeB
None
BBP
TIME
Duration of the eNodeB shutting down state
BLK BRD
BBP
BLKTP
Block Type
eNodeB
BLK BRD
BBP
AlarmState
Alarm Status
eNodeB
None
BBP
OpState
Operational State
eNodeB
None
BBP
AvailabilityStatus
Availability Status
eNodeB
None
BBP
Elabel
Electronic Label
eNodeB
None
BBP BBP
BoardType BoardSerial
Type Serial Number
eNodeB eNodeB
None None
BBP
BoardDesc
Description
eNodeB
None
BBP
BoardManu
Date of Manufacture
eNodeB
None
BBP
BoardVendor
Vendor
eNodeB
None
BBP
BoardIssue
Issue Number
eNodeB
None
BBP
RuType
Board Type
eNodeB
None
BBP BBP
CpuDspUsage ObjectNumber
CPU/DSP Usage Object Number
eNodeB eNodeB
None None
BBP
ObjectType
Object Type
eNodeB
None
BBP
BoardTemperature Board Temperature eNodeB
None
BBP BBP
HPATemperature OperateResult
HPA Temperature Operate Result
eNodeB eNodeB
None None
BBP
ServiceType
Service Type
eNodeB
None
BBP
DEVTYPE
DEVTYPE
eNodeB
None
BBP BBP
NeName SoftVer
Office Name Software Version
eNodeB eNodeB
None None
BBP
HardVer
Hardware Version
eNodeB
None
BBP BBP
BtrmVer HwTestTime
BootRom Version Test Time
eNodeB eNodeB
None None
BBP
TestResult
Test Result
eNodeB
None
BBP
DLFREQ
Downlink Frequency
eNodeB
None
BBP
ULFREQ
Uplink Frequency
eNodeB
None
BbuFan
CN
Cabinet No.
eNodeB
DSP FAN
BbuFan
SRN
Subrack No.
eNodeB
DSP FAN
BbuFan
SN
Slot No.
eNodeB
DSP FAN
BbuFan
Temperature
Temperature
eNodeB
DSP FAN
BbuFan
SpeedRate
Fan Speed Rate
eNodeB
DSP FAN
BbuFan
AlarmState
Alarm Status
eNodeB
None
BbuFan
OpState
Operational State
eNodeB
None
BbuFan
AvailabilityStatus
Availability Status
eNodeB
None
BbuFan
Elabel
Electronic Label
eNodeB
None
BbuFan BbuFan
Type Serial Number
eNodeB eNodeB
None None
BbuFan
BoardDesc
Description
eNodeB
None
BbuFan
BoardManu
Date of Manufacture
eNodeB
None
BbuFan
BoardVendor
Vendor
eNodeB
None
BbuFan
BoardIssue
Issue Number
eNodeB
None
BbuFan
RuType
Board Type
eNodeB
None
BbuFan BbuFan
eNodeB eNodeB
None None
BbuFan
ObjectType
Object Type
eNodeB
None
BbuFan
None
BbuFan BbuFan
eNodeB eNodeB
None None
BbuFan
ServiceType
Service Type
eNodeB
None
BbuFan
DEVTYPE
DEVTYPE
eNodeB
None
BbuFan BbuFan
NeName SoftVer
eNodeB eNodeB
None None
BbuFan
HardVer
Hardware Version
eNodeB
None
BbuFan BbuFan
BtrmVer HwTestTime
eNodeB eNodeB
None None
BbuFan
TestResult
Test Result
eNodeB
None
BbuFan
DLFREQ
Downlink Frequency
eNodeB
None
BbuFan
ULFREQ
Uplink Frequency
eNodeB
None
CCU
CN
Cabinet No.
eNodeB
ADD CCU CLR CCUALM DSP CCU LST CCU MOD CCU RMV CCU ADD CCU CLR CCUALM DSP CCU LST CCU MOD CCU RMV CCU ADD CCU CLR CCUALM DSP CCU LST CCU MOD CCU RMV CCU
CCU
SRN
Subrack No.
eNodeB
CCU
SN
Slot No.
eNodeB
CCU
MCN
Manager Cabinet No.
eNodeB
ADD CCU MOD CCU LST CCU ADD CCU MOD CCU LST CCU ADD CCU MOD CCU LST CCU ADD CCU MOD CCU LST CCU ADD CCU MOD CCU DSP CCU LST CCU ADD CCU MOD CCU LST CCU
CCU
MSRN
Manager Subrack No.
eNodeB
CCU
MPN
Manager Port No.
eNodeB
CCU
DCF
DirectConnectFlag
eNodeB
CCU
CCN
Cascade No.
eNodeB
CCU
CS
Connected Standard
eNodeB
CCU
SBAF
Special Boolean Alarm Flag
eNodeB
ADD CCU MOD CCU LST CCU
CCU
LPortStatus
Left Port Status
eNodeB
DSP CCU
CCU
RPortStatus
Right Port Status
eNodeB
DSP CCU
CCU CCU
SoftwareVersion PCBVersion
Software Version PCB Version
eNodeB eNodeB
DSP CCU DSP CCU
CCU
EPLDVersion
EPLD Version
eNodeB
DSP CCU
CPRILBR
RCN
RRU Chain No.
eNodeB
DSP CPRILBR STR CPRILBRNEG
CPRILBR
CURLBR
Current head line bit eNodeB rate
DSP CPRILBR
CPRILBR
CURNEGSTAT
Current head negotiation status
eNodeB
DSP CPRILBR
CPRILBR
CURTAILLBR
Current tail line bit rate
eNodeB
DSP CPRILBR
CPRILBR
CURNEGSTAT
Current tail negotiation status
eNodeB
DSP CPRILBR
CPRILBR CPRILBR CPRILBR
CN SRN SN
Cabinet No. Subrack No. Slot No.
eNodeB eNodeB eNodeB
DSP CPRILBR DSP CPRILBR DSP CPRILBR
CPRILBR
NODE
Node
eNodeB
DSP CPRILBR
CPRILBR
MAXBR
Max bit rate
eNodeB
DSP CPRILBR
CpriPort
CN
Cabinet No.
eNodeB
DSP CPRIPORT DSP RRUCHAINPHYTO PO
CpriPort
SRN
Subrack No.
eNodeB
CpriPort
SN
Slot No.
eNodeB
CpriPort
OPTN
Optical Port No.
eNodeB
CpriPort
CpriRate
CPRI Bit Rate
eNodeB
DSP CPRIPORT
CpriPort
AdmState
Block Status
eNodeB
DSP CPRIPORT
CpriPort
InstallStatus
Install Status
eNodeB
DSP CPRIPORT
CpriPort
CPRIPortMode
CPRI Port Mode
eNodeB
DSP CPRIPORT
CpriPort
PortType
Port Type
eNodeB
DSP CPRIPORT
CpriPort
BackupMode
Backup Mode
eNodeB
None
CpriPort
CMChannelType
CM Channel Type
eNodeB
None
CpriPort
DLBandWidth
DL Band Width
eNodeB
None
CpriPort
DLIQConsnum
DL IQ Consnum
eNodeB
None
CpriPort
ULIQConsnum
UL IQ Consnum
eNodeB
None
CpriPort
CpriMuxStatus
CPRI Port Mux Status
eNodeB
DSP CPRIPORT
ENERGYCON
MP
Energy Consumption eNodeB Measurement Point
SET ECMP LST ECMP
MPT
CN
Cabinet No.
eNodeB
None
MPT
SRN
Subrack No.
eNodeB
None
MPT
SN
Slot No.
eNodeB
None
MPT
TYPE
Board Type
eNodeB
None
MPT
StandbyStatus
StandBy Status
eNodeB
DSP BRD
MPT
AlarmState
Alarm Status
eNodeB
None
MPT
OpState
Operational State
eNodeB
None
MPT
AvailabilityStatus
Availability Status
eNodeB
None
MPT
Elabel
Electronic Label
eNodeB
None
MPT MPT
Type Serial Number
eNodeB eNodeB
None None
MPT
BoardDesc
Description
eNodeB
None
MPT
BoardManu
Date of Manufacture
eNodeB
None
MPT
BoardVendor
Vendor
eNodeB
None
MPT
BoardIssue
Issue Number
eNodeB
None
MPT
RuType
Board Type
eNodeB
None
MPT MPT
eNodeB eNodeB
None None
MPT
ObjectType
Object Type
eNodeB
None
MPT
None
MPT MPT
eNodeB eNodeB
None None
MPT
ServiceType
Service Type
eNodeB
None
MPT
DEVTYPE
DEVTYPE
eNodeB
None
MPT MPT
NeName SoftVer
eNodeB eNodeB
None None
MPT
HardVer
Hardware Version
eNodeB
None
MPT MPT
BtrmVer HwTestTime
eNodeB eNodeB
None None
MPT
TestResult
Test Result
eNodeB
None
MPT
DLFREQ
Downlink Frequency
eNodeB
None
MPT
ULFREQ
Uplink Frequency
eNodeB
None
PEU
CN
Cabinet No.
eNodeB
DSP UPEU
PEU
SRN
Subrack No.
eNodeB
DSP UPEU
PEU
SN
Slot No.
eNodeB
DSP UPEU
PEU PEU
UpeuSparePower BbuSparePower
UPEU Spare Power eNodeB BBU Spare Power eNodeB
DSP UPEU DSP UPEU
PEU
AlarmState
Alarm Status
eNodeB
None
PEU
OpState
Operational State
eNodeB
None
PEU
AvailabilityStatus
Availability Status
eNodeB
None
PEU
Elabel
Electronic Label
eNodeB
None
PEU PEU
Type Serial Number
eNodeB eNodeB
None None
PEU
BoardDesc
Description
eNodeB
None
PEU
BoardManu
Date of Manufacture
eNodeB
None
PEU
BoardVendor
Vendor
eNodeB
None
PEU
BoardIssue
Issue Number
eNodeB
None
PEU
RuType
Board Type
eNodeB
None
PEU PEU
eNodeB eNodeB
None None
PEU
ObjectType
Object Type
eNodeB
None
PEU
None
PEU PEU
eNodeB eNodeB
None None
PEU
ServiceType
Service Type
eNodeB
None
PEU
DEVTYPE
DEVTYPE
eNodeB
None
PEU PEU
NeName SoftVer
eNodeB eNodeB
None None
PEU
HardVer
Hardware Version
eNodeB
None
PEU PEU
BtrmVer HwTestTime
eNodeB eNodeB
None None
PEU
TestResult
Test Result
eNodeB
None
PEU
DLFREQ
Downlink Frequency
eNodeB
None
PEU
ULFREQ
Uplink Frequency
eNodeB
None
PSUIS
PSUISS
PSU Intelligent Shutdown Switch
eNodeB
SET PSUISS LST PSUISS
SFP
CN
Cabinet No.
eNodeB
DSP SFP
SFP
SRN
Subrack No.
eNodeB
DSP SFP
SFP
SN
Slot No.
eNodeB
DSP SFP
SFP
MODULEID
SFP Module Number
eNodeB
DSP SFP
SFP
InstallStatus
Installed status
eNodeB
DSP SFP
SFP
OptType
SFP Module Type
eNodeB
DSP SFP
SFP
VendorName
Manufacturer name eNodeB
DSP SFP
SFP
TransMode
Transmission Mode eNodeB
DSP SFP
SFP
WaveLength
Wavelength
eNodeB
DSP SFP
SFP
Rating
Transmission code eNodeB rate
DSP SFP
SFP
LinkLength0
Transmission distance of singlemode fiber (9micrometer core diameter)
eNodeB
DSP SFP
SFP
LinkLength1
Transmission distance of singlemode fiber (9micrometer core diameter)
eNodeB
DSP SFP
SFP
LinkLength2
Transmission distance of multimode fiber (50micrometer core diameter)
eNodeB
DSP SFP
SFP
LinkLength3
Transmission distance of multimode fiber (62.5micrometer core diameter)
eNodeB
DSP SFP
SFP
Temperature
Temperature
eNodeB
DSP SFP
SFP
Voltage
Voltage
eNodeB
DSP SFP
SFP
Current
Current
eNodeB
DSP SFP
SFP
OutputPower
TX optical power
eNodeB
DSP SFP
SFP
InputPower
RX optical power
eNodeB
DSP SFP
SFP
Transmission CopperCableLength distance of copper cable
eNodeB
None DSP BRDRAT LST UTRP MOD UTRP SET BRDRAT DSP BRDRAT LST UTRP MOD UTRP SET BRDRAT DSP BRDRAT LST UTRP MOD UTRP SET BRDRAT
TRP
CN
Cabinet No.
eNodeB
TRP
SRN
Subrack No.
eNodeB
TRP
SN
Slot No.
eNodeB
TRP
SUBTYPE
SubBoard Type
eNodeB
MOD UTRP LST UTRP
TRP
StandbyStatus
Board Standby Status
eNodeB
None
TRP
AlarmState
Alarm Status
eNodeB
None
TRP
OpState
Operational State
eNodeB
None
TRP
AvailabilityStatus
Availability Status
eNodeB
None
TRP
Elabel
Electronic Label
eNodeB
None
TRP TRP
Type Serial Number
eNodeB eNodeB
None None
TRP
BoardDesc
Description
eNodeB
None
TRP
BoardManu
Date of Manufacture
eNodeB
None
TRP
BoardVendor
Vendor
eNodeB
None
TRP
BoardIssue
Issue Number
eNodeB
None
TRP
RuType
Board Type
eNodeB
None
TRP TRP
eNodeB eNodeB
None None
TRP
ObjectType
Object Type
eNodeB
None
TRP
None
TRP TRP
eNodeB eNodeB
None None
TRP
ServiceType
Service Type
eNodeB
None
TRP
DEVTYPE
DEVTYPE
eNodeB
None
TRP TRP
NeName SoftVer
eNodeB eNodeB
None None
TRP
HardVer
Hardware Version
eNodeB
None
TRP TRP
BtrmVer HwTestTime
eNodeB eNodeB
None None
TRP
TestResult
Test Result
eNodeB
None
TRP
DLFREQ
Downlink Frequency
eNodeB
None
TRP
ULFREQ
Uplink Frequency
eNodeB
None
UCIU
CN
Cabinet No.
eNodeB
None
UCIU UCIU
SRN SN
Subrack No. Slot No.
eNodeB eNodeB
None None
UCIU
AlarmState
Alarm Status
eNodeB
None
UCIU
OpState
Operational State
eNodeB
None
UCIU
AvailabilityStatus
Availability Status
eNodeB
None
UCIU
Elabel
Electronic Label
eNodeB
None
UCIU UCIU
Type Serial Number
eNodeB eNodeB
None None
UCIU
BoardDesc
Description
eNodeB
None
UCIU
BoardManu
Date of Manufacture
eNodeB
None
UCIU
BoardVendor
Vendor
eNodeB
None
UCIU
BoardIssue
Issue Number
eNodeB
None
UCIU
RuType
Board Type
eNodeB
None
UCIU UCIU
eNodeB eNodeB
None None
UCIU
ObjectType
Object Type
eNodeB
None
UCIU
None
UCIU UCIU
eNodeB eNodeB
None None
UCIU
ServiceType
Service Type
eNodeB
None
UCIU
DEVTYPE
DEVTYPE
eNodeB
None
UCIU UCIU
NeName SoftVer
eNodeB eNodeB
None None
UCIU
HardVer
Hardware Version
eNodeB
None
UCIU UCIU
BtrmVer HwTestTime
eNodeB eNodeB
None None
UCIU
TestResult
Test Result
eNodeB
None
UCIU
DLFREQ
Downlink Frequency
eNodeB
None
UCIU
ULFREQ
Uplink Frequency
eNodeB
None
UEIU
CN
Cabinet No.
eNodeB
None
UEIU
SRN
Subrack No.
eNodeB
None
UEIU
SN
Slot No.
eNodeB
None
UEIU
AlarmState
Alarm Status
eNodeB
None
UEIU
OpState
Operational State
eNodeB
None
UEIU
AvailabilityStatus
Availability Status
eNodeB
None
UEIU
Elabel
Electronic Label
eNodeB
None
UEIU UEIU
Type Serial Number
eNodeB eNodeB
None None
UEIU
BoardDesc
Description
eNodeB
None
UEIU
BoardManu
Date of Manufacture
eNodeB
None
UEIU
BoardVendor
Vendor
eNodeB
None
UEIU
BoardIssue
Issue Number
eNodeB
None
UEIU
RuType
Board Type
eNodeB
None
UEIU UEIU
eNodeB eNodeB
None None
UEIU
ObjectType
Object Type
eNodeB
None
UEIU
None
UEIU UEIU
eNodeB eNodeB
None None
UEIU
ServiceType
Service Type
eNodeB
None
UEIU
DEVTYPE
DEVTYPE
eNodeB
None
UEIU UEIU
NeName SoftVer
eNodeB eNodeB
None None
UEIU
HardVer
Hardware Version
eNodeB
None
UEIU UEIU
BtrmVer HwTestTime
eNodeB eNodeB
None None
UEIU
TestResult
Test Result
eNodeB
None
UEIU
DLFREQ
Downlink Frequency
eNodeB
None
UEIU
ULFREQ
Uplink Frequency
eNodeB
None
USCU
CN
Cabinet No.
eNodeB
None
USCU
SRN
Subrack No.
eNodeB
None
USCU
SN
Slot No.
eNodeB
None
USCU
AlarmState
Alarm Status
eNodeB
None
USCU
OpState
Operational State
eNodeB
None
USCU
AvailabilityStatus
Availability Status
eNodeB
None
USCU
Elabel
Electronic Label
eNodeB
None
USCU USCU
Type Serial Number
eNodeB eNodeB
None None
USCU
BoardDesc
Description
eNodeB
None
USCU
BoardManu
Date of Manufacture
eNodeB
None
USCU
BoardVendor
Vendor
eNodeB
None
USCU
BoardIssue
Issue Number
eNodeB
None
USCU
RuType
Board Type
eNodeB
None
USCU USCU
eNodeB eNodeB
None None
USCU
ObjectType
Object Type
eNodeB
None
USCU
None
USCU USCU
eNodeB eNodeB
None None
USCU
ServiceType
Service Type
eNodeB
None
USCU
DEVTYPE
DEVTYPE
eNodeB
None
USCU USCU
NeName SoftVer
eNodeB eNodeB
None None
USCU
HardVer
Hardware Version
eNodeB
None
USCU USCU
BtrmVer HwTestTime
eNodeB eNodeB
None None
USCU
TestResult
Test Result
eNodeB
None
USCU
DLFREQ
Downlink Frequency
eNodeB
None
USCU
ULFREQ
Uplink Frequency
eNodeB
None
Equipment
DID
Deployment ID
eNodeB
SET EQUIPMENT LST EQUIPMENT
Equipment
BATIMS
Battery Intelligent Management Switch
eNodeB
Equipment
PAE
Power Lose Redundancy Alarm eNodeB Enabled
Equipment
MNTMode
Maintenance Mode eNodeB
SET MNTMODE LST MNTMODE
Equipment
ST
Start Time of Status eNodeB Setting
Equipment
ET
End Time of Status eNodeB Setting
Equipment
MMSetRemark
Maintenance Mode eNodeB Setting Remark
Equipment
CurrMNTMode
Current eNodeB Maintenance Mode
DSP MNTMODE
Equipment
DVAS
Direct Voltage Alarm Switch
eNodeB
SET DVAS LST DVAS
Equipment
DVAH
Direct Voltage Alarm Occured Threshold
eNodeB
SET DVAS LST DVAS
Equipment
DVAL
Direct Voltage Alarm Restored Threshold
eNodeB
SET DVAS LST DVAS
Cabinet
CN
Cabinet No.
eNodeB
ADD CABINET DSP CABMFRINFO LST CABINET MOD CABINET RMV CABINET
Cabinet
TYPE
Cabinet Type
eNodeB
ADD CABINET MOD CABINET LST CABINET
Cabinet
DESC
Cabinet Description eNodeB
ADD CABINET MOD CABINET LST CABINET
Cabinet
CabinetType
Model
eNodeB
DSP CABMFRINFO
Subrack
CN
Cabinet No.
eNodeB
ADD SUBRACK LST SUBRACK MOD SUBRACK RMV SUBRACK
Subrack
SRN
Subrack No.
eNodeB
ADD SUBRACK LST SUBRACK MOD SUBRACK RMV SUBRACK
Subrack
TYPE
Subrack Type
eNodeB
ADD SUBRACK LST SUBRACK
Subrack
DESC
Subrack Description eNodeB
ADD SUBRACK MOD SUBRACK LST SUBRACK
Subrack
PWRTYPE
Power Type
eNodeB
None
RU
AlarmState
Alarm Status
eNodeB
DSP BRD
RU
OpState
Operational State
eNodeB
DSP BRD
RU
AvailabilityStatus
Availability Status
eNodeB
DSP BRD
RU
Elabel
Electronic Label
eNodeB
DSP ELABEL
RU
BoardType
Type
eNodeB
RU
BoardSerial
Serial Number
eNodeB
DSP BRDMFRINFO DSP BRDMFRINFO DSP CABMFRINFO DSP HWTSTRESULT
RU
BoardDesc
Description
eNodeB
DSP BRDMFRINFO DSP CABMFRINFO DSP HWTSTRESULT DSP BRDMFRINFO DSP CABMFRINFO DSP BRDMFRINFO DSP CABMFRINFO DSP BRDMFRINFO
RU
BoardManu
Date of Manufacture
eNodeB
RU
BoardVendor
Vendor
eNodeB
RU
BoardIssue
Issue Number
eNodeB
RU
RuType
Board Type
eNodeB
DSP BRD
RU RU
eNodeB eNodeB
DSP CPUUSAGE DSP CPUUSAGE
RU
ObjectType
Object Type
eNodeB
DSP CPUUSAGE
RU
DSP BRDTEMP
RU RU
eNodeB eNodeB
DSP BRDTEMP None
RU
ServiceType
Service Type
eNodeB
None
RU
DEVTYPE
DEVTYPE
eNodeB
DSP ELABEL
RU RU
NeName SoftVer
eNodeB eNodeB
DSP HWTSTRESULT DSP HWTSTRESULT DSP HWTSTRESULT DSP HWTSTRESULT DSP HWTSTRESULT DSP HWTSTRESULT
RU
HardVer
Hardware Version
eNodeB
RU RU
BtrmVer HwTestTime
eNodeB eNodeB
RU
TestResult
Test Result
eNodeB
RU
DLFREQ
Downlink Frequency
eNodeB
STR HWTST
RU
ULFREQ
Uplink Frequency
eNodeB
STR HWTST
EMU
CN
Cabinet No.
eNodeB
ADD EMU CLR EMUALM DSP EMU LST EMU MOD EMU RMV EMU ADD EMU CLR EMUALM DSP EMU LST EMU MOD EMU RMV EMU ADD EMU CLR EMUALM DSP EMU LST EMU MOD EMU RMV EMU
EMU
SRN
Subrack No.
eNodeB
EMU
SN
Slot No.
eNodeB
EMU
MCN
Manager Cabinet No.
eNodeB
ADD EMU LST EMU
EMU
MSRN
Manager Subrack No.
eNodeB
ADD EMU LST EMU
EMU
MPN
Manager Port No.
eNodeB
ADD EMU MOD EMU LST EMU
EMU
ADDR
Address
eNodeB
EMU
TLTHD
Temperature Alarm eNodeB Lower Threshold
EMU
TUTHD
Temperature Alarm eNodeB Upper Threshold
EMU
HLTHD
Humidity Alarm Lower Threshold
eNodeB
EMU
HUTHD
Humidity Alarm Upper Threshold
eNodeB
EMU
SAAF
Special Analog Alarm Flag
eNodeB
EMU
SBAF
eNodeB
EMU EMU
Temperature Humidity
Ambient Temperature Ambient Humidity
eNodeB eNodeB
DSP EMU DSP EMU
EMU
Invol48
-48V Input Voltage
eNodeB
DSP EMU
EMU
Anain1
Analog Port 1 eNodeB Measurement Value
DSP EMU
EMU
Anain2
DSP EMU
EMU
Anain3
DSP EMU
EMU
Anain4
DSP EMU
EMU
AlarmState
Alarm Status
eNodeB
None
EMU
OpState
Operational State
eNodeB
None
EMU
AvailabilityStatus
Availability Status
eNodeB
None
EMU
Elabel
Electronic Label
eNodeB
None
EMU EMU
Type Serial Number
eNodeB eNodeB
None None
EMU
BoardDesc
Description
eNodeB
None
EMU
BoardManu
Date of Manufacture
eNodeB
None
EMU
BoardVendor
Vendor
eNodeB
None
EMU
BoardIssue
Issue Number
eNodeB
None
EMU
RuType
Board Type
eNodeB
None
EMU EMU
eNodeB eNodeB
None None
EMU
ObjectType
Object Type
eNodeB
None
EMU
None
EMU EMU
eNodeB eNodeB
None None
EMU
ServiceType
Service Type
eNodeB
None
EMU
DEVTYPE
DEVTYPE
eNodeB
None
EMU EMU
NeName SoftVer
eNodeB eNodeB
None None
EMU
HardVer
Hardware Version
eNodeB
None
EMU EMU
BtrmVer HwTestTime
eNodeB eNodeB
None None
EMU
TestResult
Test Result
eNodeB
None
EMU
DLFREQ
Downlink Frequency
eNodeB
None
EMU
ULFREQ
Uplink Frequency
eNodeB
None
FMU
CN
Cabinet No.
eNodeB
ADD FMU CLR FMUALM DSP FMU LST FMU MOD FMU RMV FMU ADD FMU CLR FMUALM DSP FMU LST FMU MOD FMU RMV FMU ADD FMU CLR FMUALM DSP FMU LST FMU MOD FMU RMV FMU
FMU
SRN
Subrack No.
eNodeB
FMU
SN
Slot No.
eNodeB
FMU
MCN
Manager Cabinet No.
eNodeB
ADD FMU MOD FMU LST FMU
FMU
MSRN
Manager Subrack No.
eNodeB
FMU
MPN
Manager Port No.
eNodeB
FMU
ADDR
Address
eNodeB
FMU
SBAF
eNodeB
FMU
SpeedRate
Fan Speed Rate
eNodeB
DSP FMU
FMU
TempOut
Temperature at Fan eNodeB Air Outlet Temperature at Fan eNodeB Air Inlet
DSP FMU
FMU
TempIn
DSP FMU
FMU
AverageSpeed
Fan Average Speed eNodeB
DSP FMU
FMU
STC
Smart Temperature eNodeB Control
FMU
AlarmState
Alarm Status
eNodeB
None
FMU
OpState
Operational State
eNodeB
None
FMU
AvailabilityStatus
Availability Status
eNodeB
None
FMU
Elabel
Electronic Label
eNodeB
None
FMU FMU
Type Serial Number
eNodeB eNodeB
None None
FMU
BoardDesc
Description
eNodeB
None
FMU
BoardManu
Date of Manufacture
eNodeB
None
FMU
BoardVendor
Vendor
eNodeB
None
FMU
BoardIssue
Issue Number
eNodeB
None
FMU
RuType
Board Type
eNodeB
None
FMU FMU
eNodeB eNodeB
None None
FMU
ObjectType
Object Type
eNodeB
None
FMU
None
FMU FMU
eNodeB eNodeB
None None
FMU
ServiceType
Service Type
eNodeB
None
FMU
DEVTYPE
DEVTYPE
eNodeB
None
FMU FMU
NeName SoftVer
eNodeB eNodeB
None None
FMU
HardVer
Hardware Version
eNodeB
None
FMU FMU
BtrmVer HwTestTime
eNodeB eNodeB
None None
FMU
TestResult
Test Result
eNodeB
None
FMU
DLFREQ
Downlink Frequency
eNodeB
None
FMU
ULFREQ
Uplink Frequency
eNodeB
None
TCU
CN
Cabinet No.
eNodeB
ADD TCU CLR TCUALM DSP TCU LST TCU MOD TCU RMV TCU ADD TCU CLR TCUALM DSP TCU LST TCU MOD TCU RMV TCU
TCU
SRN
Subrack No.
eNodeB
TCU
SN
Slot No.
eNodeB
ADD TCU CLR TCUALM DSP TCU LST TCU MOD TCU RMV TCU
TCU
MCN
Manager Cabinet No.
eNodeB
ADD TCU LST TCU
TCU
MSRN
Manager Subrack No.
eNodeB
ADD TCU LST TCU
TCU
MPN
Manager Port No.
eNodeB
ADD TCU MOD TCU LST TCU
TCU
ADDR
Address
eNodeB
TCU
TLTHD
TCU
TUTHD
TCU
SBAF
eNodeB
TCU TCU
DeviceType TempIn
Device Type Temperature In
eNodeB eNodeB
DSP TCU DSP TCU
TCU
TempOut
Temperature Out
eNodeB
DSP TCU
TCU
TempInner
Temperature Inner
eNodeB
DSP TCU
TCU
InCycleSpeedRate
Inner Cycle Fan Average Speed
eNodeB
DSP TCU
TCU
OutCycleSpeedRat Outer Cycle Fan e Average Speed
eNodeB
DSP TCU
TCU
Power
Power
eNodeB
DSP TCU
TCU TCU
eNodeB eNodeB
DSP TCU DSP TCU
TCU
EPLDVersion
EPLD Version
eNodeB
DSP TCU
TCU
SoftwareBuildTime Software Build Time eNodeB
DSP TCU
TCU
VersionDescription Version Description eNodeB
DSP TCU
TCU
ProduceDate
Produce Date
eNodeB
None
TCU
Manufacturer
Manufacturer
eNodeB
DSP TCU
TCU
AlarmState
Alarm Status
eNodeB
None
TCU
OpState
Operational State
eNodeB
None
TCU
AvailabilityStatus
Availability Status
eNodeB
None
TCU
Elabel
Electronic Label
eNodeB
None
TCU TCU
Type Serial Number
eNodeB eNodeB
None None
TCU
BoardDesc
Description
eNodeB
None
TCU
BoardManu
Date of Manufacture
eNodeB
None
TCU
BoardVendor
Vendor
eNodeB
None
TCU
BoardIssue
Issue Number
eNodeB
None
TCU
RuType
Board Type
eNodeB
None
TCU TCU
eNodeB eNodeB
None None
TCU
ObjectType
Object Type
eNodeB
None
TCU
None
TCU TCU
eNodeB eNodeB
None None
TCU
ServiceType
Service Type
eNodeB
None
TCU
DEVTYPE
DEVTYPE
eNodeB
None
TCU TCU
NeName SoftVer
eNodeB eNodeB
None None
TCU
HardVer
Hardware Version
eNodeB
None
TCU TCU
BtrmVer HwTestTime
eNodeB eNodeB
None None
TCU
TestResult
Test Result
eNodeB
None
TCU
DLFREQ
Downlink Frequency
eNodeB
None
TCU
ULFREQ
Uplink Frequency
eNodeB
None
HtCDPa
CN
Cabinet No.
eNodeB
LST HTCDPA MOD HTCDPA
HtCDPa
SRN
Subrack No.
eNodeB
HtCDPa
SN
Slot No.
eNodeB
HtCDPa
LTCP
Low Temperature Critical Point
eNodeB
MOD HTCDPA LST HTCDPA
HtCDPa
HTCP
High Temperature Critical Point
eNodeB
HtCDPa
TLT
Temperature Limit at Air Outlet
eNodeB
HtCDPa
DBD
Dead Band
eNodeB
HtCDPa
NTDI
Normal Temperature Delta Tin
eNodeB
HtCDPa
NTDO
Normal Temperature Delta Tout
eNodeB
HtCDPa
HTDO
High Temperature Delta Tout
eNodeB
PMU
CN
Cabinet No.
eNodeB
ADD PMU CLR PMUALM DSP PMU LST PMU MOD PMU RMV PMU ADD PMU CLR PMUALM DSP PMU LST PMU MOD PMU RMV PMU ADD PMU CLR PMUALM DSP PMU LST PMU MOD PMU RMV PMU
PMU
SRN
Subrack No.
eNodeB
PMU
SN
Slot No.
eNodeB
PMU
MCN
Manager Cabinet No.
eNodeB
ADD PMU LST PMU
PMU
MSRN
Manager Subrack No.
eNodeB
ADD PMU LST PMU
PMU
MPN
Manager Port No.
eNodeB
ADD PMU MOD PMU LST PMU
PMU
ADDR
Address
eNodeB
PMU
PTYPE
Power System Type eNodeB
PMU
ACVLTHD
AC Voltage Alarm Lower Threshold
eNodeB
PMU
ACVUTHD
AC Voltage Alarm Upper Threshold
eNodeB
PMU
DCVLTHD
DC Voltage Alarm Lower Threshold
eNodeB
PMU
DCVUTHD
DC Voltage Alarm Upper Threshold
eNodeB
PMU
LSDF
Load Shutdown Flag
eNodeB
PMU
LSDV
Load Shutdown Voltage
eNodeB
PMU
ATLTHD
Cabinet Temperature Alarm eNodeB Lower Threshold
PMU
ATUTHD
Cabinet Temperature Alarm eNodeB Upper Threshold
PMU
AHLTHD
Cabinet Humidity Alarm Lower Threshold
eNodeB
PMU
AHUTHD
Cabinet Humidity Alarm Upper Threshold
eNodeB
PMU
SAAF
Special Analog Alarm Flag
eNodeB
PMU
SBAF
eNodeB
PMU
AcVol
AC Voltage
eNodeB
DSP PMU
PMU PMU
DcVol LoadCurrent
Busbar Voltage Load Total Current
eNodeB eNodeB
DSP PMU DSP PMU
PMU
LoadTemp
Temperature
eNodeB
DSP PMU
PMU
Humidity
Cabinet Humidity
eNodeB
DSP PMU
PMU
ScdLoadPwrState
Secondary Load Power State
eNodeB
DSP PMU
PMU
BatChargeState
Charging/Dischargi eNodeB ng State
DSP BATTERY
PMU
BatCurrent
Battery Current
eNodeB
DSP BATTERY
PMU
BatCurrentLimitStat Current Limiting e State
eNodeB
None
PMU
BatPowerState
Battery Power State eNodeB
DSP BATTERY
PMU
BatRemainCapacity Remaining Capacity eNodeB
DSP BATTERY
PMU
BatTemp
Battery Temperature
eNodeB
DSP BATTERY
PMU
BatTestPhase
Battery Test Phase eNodeB
DSP BATTERY
PMU
PhotovoltaicArrayC Photovoltaic Array urrent Total Current
eNodeB
DSP PMU
PMU
DieselCurrent
Diesel Generator Current
eNodeB
DSP PMU
PMU
Auxiliary Battery AuxBatCabinetTem Cabinet p Temperature
eNodeB
DSP PMU
PMU PMU
eNodeB eNodeB
DSP PMU DSP PMU
PMU
EPLDVersion
EPLD Version
eNodeB
DSP PMU
PMU
DSP PMU
PMU
VersionDescription Version Description eNodeB
DSP PMU
PMU
ProduceDate
Produce Date
eNodeB
DSP PMU
PMU
Manufacturer
Manufacturer
eNodeB
DSP PMU
PMU
ISCapability
PSU Intelligent Shutdown Capability
eNodeB
DSP PMU
PMU
ISSwitchState
PSU Intelligent Shutdown Switch
eNodeB
DSP PMU
PMU
ISExecuteResult
Execute Result
eNodeB
None
PMU
BatRemainTime
Remaining Time
eNodeB
DSP BATTERY
PMU
Battery BatAccumulatedCh Accumulated argeTime Charge Time
eNodeB
DSP BATTERY
PMU
Battery BatAccumulatedSle Accumulated epingTime Sleeping Time
eNodeB
DSP BATTERY
PMU
BatImsCapability
Battery Intelligent Management Capability
eNodeB
DSP PMU
PMU
BatImsSwitchState
Battery Intelligent eNodeB Management Mode
DSP PMU
PMU
AlarmState
Alarm Status
eNodeB
None
PMU
OpState
Operational State
eNodeB
None
PMU
AvailabilityStatus
Availability Status
eNodeB
None
PMU
Elabel
Electronic Label
eNodeB
None
PMU PMU
Type Serial Number
eNodeB eNodeB
None None
PMU
BoardDesc
Description
eNodeB
None
PMU
BoardManu
Date of Manufacture
eNodeB
None
PMU
BoardVendor
Vendor
eNodeB
None
PMU
BoardIssue
Issue Number
eNodeB
None
PMU
RuType
Board Type
eNodeB
None
PMU PMU
eNodeB eNodeB
None None
PMU
ObjectType
Object Type
eNodeB
None
PMU
None
PMU PMU
eNodeB eNodeB
None None
PMU
ServiceType
Service Type
eNodeB
None
PMU
DEVTYPE
DEVTYPE
eNodeB
None
PMU PMU
NeName SoftVer
eNodeB eNodeB
None None
PMU
HardVer
Hardware Version
eNodeB
None
PMU PMU
BtrmVer HwTestTime
eNodeB eNodeB
None None
PMU
TestResult
Test Result
eNodeB
None
PMU
DLFREQ
Downlink Frequency
eNodeB
None
PMU
ULFREQ
Uplink Frequency
eNodeB
None
DieselGen
CN
Cabinet No.
eNodeB
ADD DIESELGEN DSP DIESELGEN LST DIESELGEN MOD DIESELGEN RMV DIESELGEN STP DIESELGENTST STR DIESELGENTST ADD DIESELGEN DSP DIESELGEN LST DIESELGEN MOD DIESELGEN RMV DIESELGEN STP DIESELGENTST STR DIESELGENTST
DieselGen
SRN
Subrack No.
eNodeB
DieselGen
SN
Slot No.
eNodeB
ADD DIESELGEN DSP DIESELGEN LST DIESELGEN MOD DIESELGEN RMV DIESELGEN STP DIESELGENTST STR DIESELGENTST
DieselGen
ICF
Intelligent Control Flag
eNodeB
ADD DIESELGEN MOD DIESELGEN LST DIESELGEN
DieselGen
POWER
Rated Power
eNodeB
ADD DIESELGEN MOD DIESELGEN LST DIESELGEN
DieselGen
OL
Oil Level Diesel Generator Current
eNodeB
DSP DIESELGEN
DieselGen
DGC
eNodeB
DSP DIESELGEN
DieselGen
TRT
Total Running Time eNodeB
DSP DIESELGEN ADD BATTERY DSP BATINDT DSP BATTERY LST BATTERY MOD BATINDT MOD BATTERY RMV BATTERY
Battery
CN
Cabinet No.
eNodeB
Battery
SRN
Subrack No.
eNodeB
ADD BATTERY DSP BATINDT DSP BATTERY LST BATTERY MOD BATINDT MOD BATTERY RMV BATTERY ADD BATTERY DSP BATINDT DSP BATTERY LST BATTERY MOD BATINDT MOD BATTERY RMV BATTERY
Battery
SN
Slot No.
eNodeB
Battery
INSTALLTYPE
Installation Type
eNodeB
ADD BATTERY MOD BATTERY LST BATTERY
Battery
BCD
Boost-Charging Duration
eNodeB
Battery
BCV
Boost-Charging Voltage
eNodeB
Battery
BC1
Battery 1 Capacity
eNodeB
Battery
BCLC
Battery Current eNodeB Limiting Coefficient
Battery
FCV
Float-Charging Voltage
eNodeB
Battery
HTSDF
High Temperature Shutdown Flag
eNodeB
Battery
SDT
Shutdown Temperature
eNodeB
Battery
LVSDF
Low Voltage Shutdown Flag
eNodeB
Battery
SDV
Shutdown Voltage
eNodeB
Battery
TCC
Temperature Compensation Coefficient
eNodeB
Battery
TLTHD
Battery
TUTHD
Battery
BN
Battery Number
eNodeB
ADD BATTERY MOD BATTERY DSP BATTERY LST BATTERY
Battery
BTYPE
Battery Type
eNodeB
ADD BATTERY MOD BATTERY DSP BATTERY LST BATTERY
Battery
PCT
Power Cut Times
eNodeB
DSP BATTERY
Battery
CTHALF
Charge Times In Half an Hour
eNodeB
DSP BATTERY
Battery
CT1H
Charge Times In 1 Hour
eNodeB
DSP BATTERY
Battery
CT2H
Charge Times In 2 Hours
eNodeB
DSP BATTERY
Battery
CT3H
eNodeB
DSP BATTERY
Battery
CT4H
eNodeB
DSP BATTERY
Battery
CT5H
eNodeB
DSP BATTERY
Battery
CT6H
eNodeB
DSP BATTERY
Battery
CT7H
eNodeB
DSP BATTERY
Battery
CT8H
eNodeB
DSP BATTERY
Battery
CT8UH
Charge Times In More than 8 Hours
eNodeB
DSP BATTERY
Battery
DCTHALF
Discharge Times In eNodeB Half an Hour
DSP BATTERY
Battery
DCT1
Discharge Times In eNodeB 1 Hour
DSP BATTERY
Battery
DCT2
Discharge Times In eNodeB 2 Hours
DSP BATTERY
Battery
DCT3
DSP BATTERY
Battery
DCT4
DSP BATTERY
Battery
DCT5
DSP BATTERY
Battery
DCT6
DSP BATTERY
Battery
DCT7
DSP BATTERY
Battery
DCT8
DSP BATTERY
Battery
DCTU8
Discharge Times In eNodeB More than 8 Hours
DSP BATTERY
Battery
DATE
Installation Date
eNodeB
MOD BATINDT DSP BATINDT
Battery
BC2
Battery 2 Capacity
eNodeB
BatCTPa
CN
Cabinet No.
eNodeB
DSP BATTR LST BATCTPA MOD BATCTPA STP BATTST STR BATTST DSP BATTR LST BATCTPA MOD BATCTPA STP BATTST STR BATTST DSP BATTR LST BATCTPA MOD BATCTPA STP BATTST STR BATTST
BatCTPa
SRN
Subrack No.
eNodeB
BatCTPa
SN
Slot No.
eNodeB
BatCTPa
DSCHGT0
0.05C10 Discharge eNodeB Time
MOD BATCTPA LST BATCTPA
BatCTPa
DSCHGT1
0.1C10 Discharge Time
eNodeB
BatCTPa
DSCHGT2
eNodeB
BatCTPa
DSCHGT3
eNodeB
BatCTPa
DSCHGT4
eNodeB
BatCTPa
DSCHGT5
eNodeB
BatCTPa
DSCHGT6
eNodeB
BatCTPa
DSCHGT7
eNodeB
BatCTPa
DSCHGT8
eNodeB
BatCTPa
DSCHGT9
eNodeB
BatCTPa
EFF
Battery Charge Efficiency
eNodeB
BatCTPa
ENDV
Discharge Test End eNodeB Voltage
BatCTPa
BATNUM
Battery Number
eNodeB
BatCTPa
DSTML
Discharge Test Time Limit
eNodeB
BatCTPa
SDSTML
Simple Discharge Test Time Limit
eNodeB
BatCTPa
SDSEV
Simple Discharge Test End Voltage
eNodeB
BatCTPa
ATMODE
Automatic Test Mode
eNodeB
BatCTPa
TDSTM
Timing Discharge Test Time
eNodeB
BatCTPa
DDSTM
Delayed Discharge eNodeB Test Time
BatCTPa
TYPE
Battery Test Type
eNodeB
STR BATTST DSP BATTR
BatCTPa
TstStrDateTime
Test Start Time
eNodeB
DSP BATTR
BatCTPa
TstEndReason
Test End Cause
eNodeB
DSP BATTR
BatCTPa
TstResult
Test Result
eNodeB
DSP BATTR
BatCTPa
TstEffi
Battery Efficency
eNodeB
DSP BATTR
BatCTPa
TstDischrLstTime
Discharge Last Time
eNodeB
DSP BATTR
BatCTPa
TstDischrEndVol
Discharge End Voltage
eNodeB
DSP BATTR
BatCTPa
TstDischrCurr
Discharge Average eNodeB Current
DSP BATTR
BatCTPa
TstDischrAh
Discharge AH
eNodeB
DSP BATTR
BatCTPa
TstBatTemp
Battery Temperature
eNodeB
DSP BATTR ADD PSU DSP PSU LST PSU RMV PSU ADD PSU DSP PSU LST PSU RMV PSU
PSU
CN
Cabinet No.
eNodeB
PSU
SRN
Subrack No.
eNodeB
PSU
SN
Slot No.
eNodeB
ADD PSU DSP PSU LST PSU RMV PSU
PSU
RunningStatus
Running Status
eNodeB
DSP PSU
PSU
ProduceDate
Produce Date
eNodeB
DSP PSU
PSU
Manufacturer
Manufacturer
eNodeB
DSP PSU
PSU
PCBVersion
PCB Version
eNodeB
DSP PSU
PSU
EPLDVersion
EPLD Version
eNodeB
DSP PSU
PSU
DSP PSU
PSU
AlarmState
Alarm Status
eNodeB
None
PSU
OpState
Operational State
eNodeB
None
PSU
AvailabilityStatus
Availability Status
eNodeB
None
PSU
Elabel
Electronic Label
eNodeB
None
PSU PSU
Type Serial Number
eNodeB eNodeB
None None
PSU
BoardDesc
Description
eNodeB
None
PSU
BoardManu
Date of Manufacture
eNodeB
None
PSU
BoardVendor
Vendor
eNodeB
None
PSU
BoardIssue
Issue Number
eNodeB
None
PSU
RuType
Board Type
eNodeB
None
PSU PSU
eNodeB eNodeB
None None
PSU
ObjectType
Object Type
eNodeB
None
PSU
None
PSU PSU
eNodeB eNodeB
None None
PSU
ServiceType
Service Type
eNodeB
None
PSU
DEVTYPE
DEVTYPE
eNodeB
None
PSU PSU
NeName SoftVer
eNodeB eNodeB
None DSP PSU
PSU
HardVer
Hardware Version
eNodeB
None
PSU PSU
BtrmVer HwTestTime
eNodeB eNodeB
None None
PSU
TestResult
Test Result
eNodeB
None
PSU
DLFREQ
Downlink Frequency
eNodeB
None
PSU
ULFREQ
Uplink Frequency
eNodeB
None
OutPort
CN
Cabinet No.
eNodeB
LST OUTPORT SET OUTPORT
OutPort
SRN
Subrack No.
eNodeB
LST OUTPORT SET OUTPORT
OutPort
SN
Slot No.
eNodeB
LST OUTPORT SET OUTPORT LST OUTPORT SET OUTPORT SET OUTPORT LST OUTPORT
OutPort
PN
Port No.
eNodeB
OutPort
NAME
Port Name
eNodeB
OutPort
SW
Port Switch
eNodeB
SET OUTPORT LST OUTPORT
AlmPort
CN
Cabinet No.
eNodeB
LST ALMPORT SET ALMPORT
AlmPort
SRN
Subrack No.
eNodeB
AlmPort
SN
Slot No.
eNodeB
LST ALMPORT SET ALMPORT LST ALMPORT SET ALMPORT
AlmPort
PN
Port No.
eNodeB
AlmPort
SW
Switch
eNodeB
SET ALMPORT LST ALMPORT
AlmPort
AID
Alarm ID
eNodeB
AlmPort
PT
Port Type
eNodeB
AlmPort
AVOL
Alarm Voltage
eNodeB
AlmPort
UL
Alarm Upper Limit
eNodeB
AlmPort
LL
Alarm Lower Limit
eNodeB
AlmPort
ST
Sensor Type
eNodeB
AlmPort
SMUL
Sensor Measurement Upper Limit
eNodeB
AlmPort
SMLL
Sensor Measurement Lower Limit
eNodeB
AlmPort
SOUL
Sensor Output Upper Limit
eNodeB
AlmPort
SOLL
Sensor Output Lower Limit
eNodeB
SSL
CONNTYPE
Connection Type
eNodeB
SET CONNTYPE LST SSLCONF SET SSLAUTHMODE LST SSLCONF
SSL
AUTHMODE
Authentication Mode
eNodeB
AAU
CN
Cabinet No.
eNodeB
None
AAU
SRN
Subrack No.
eNodeB
None
AAU
SN
Slot No.
eNodeB
None
AAU
RN
RRU Name
eNodeB
None
AAU
RT
RRU Type
eNodeB
None
AAU
AdmState
None
AAU
AlarmState
Alarm Status
eNodeB
None
AAU
OpState
Operational State
eNodeB
None
AAU
AvailabilityStatus
Availability Status
eNodeB
None
AAU
Elabel
Electronic Label
eNodeB
None
AAU AAU
Type Serial Number
eNodeB eNodeB
None None
AAU
BoardDesc
Description
eNodeB
None
AAU
BoardManu
Date of Manufacture
eNodeB
None
AAU
BoardVendor
Vendor
eNodeB
None
AAU
BoardIssue
Issue Number
eNodeB
None
AAU
RuType
Board Type
eNodeB
None
AAU AAU
eNodeB eNodeB
None None
AAU
ObjectType
Object Type
eNodeB
None
AAU
None
AAU AAU
eNodeB eNodeB
None None
AAU
ServiceType
Service Type
eNodeB
None
AAU
DEVTYPE
DEVTYPE
eNodeB
None
AAU
ALMPROCSW
VSWR alarm postprocessing switch
eNodeB
None
AAU
ALMPROCTHRHL D
VSWR alarm postprocessing threshold
eNodeB
None
AAU
ALMTHRHLD
VSWR alarm threshold
eNodeB
None
AAU
PS
RRU Position
eNodeB
None
AAU
RCN
RRU Chain No.
eNodeB
None
AAU
TP
RRU Topo Position eNodeB
None
AAU
RS
RRU Work Standard
eNodeB
None
AAU
RXNUM
Number of RX channels
eNodeB
None
AAU
TXNUM
Number of TX channels
eNodeB
None
AAU
CarrierNumPerRxBr Number of carriers anch on the RX channel CarrierNumPerTxBr Number of carriers anch on the TX channel
eNodeB
None
AAU
eNodeB
None
AAU
RxMinFreq
Minimum UL frequency
eNodeB
None
AAU
RxMaxFreq
Maximum UL frequency
eNodeB
None
AAU
TxMinFreq
Minimum DL frequency
eNodeB
None
AAU
TxMaxFreq
Maximum DL frequency
eNodeB
None
AAU
Maximum output MaxOutPwrPerBran power on the TX ch channel UlBranchGain UL channel gain
eNodeB
None
AAU
eNodeB
None
AAU
UlBandwidth
Supported UL Bandwidth
eNodeB
None
AAU
PATemperature
PA Temperature
eNodeB
None
AAU
Temperature
Board Temperature eNodeB
None
AAU
Level
Trunk Level
eNodeB
None
AAU
DeviceSerialNo
Physical RRU device serial No.
eNodeB
None
AAU
RatType
RRU standard capability
eNodeB
None
AAU
AccessDirection
Access Direction
eNodeB
None
AAU
MaxOutputOneCar
Maximum Output Power of TX Unit 0 (Single Carrier)
eNodeB
None
AAU
MaxOutputMutiCar
Maximum Output Power of TX Unit 0 (Multiple Carriers)
eNodeB
None
AAU
DlBandwidth
Supported DL Bandwidth
eNodeB
None
AAU
PHYID
Physical ID.
eNodeB
None
AAU
SW
Periodical Report Switch
eNodeB
None
AAU
TM
Test Time
eNodeB
None
AAU
CM
Check Mode
eNodeB
None
AAU
PSP
Power Statistic Period
eNodeB
None
AAU
PST
Power Statistic Time
eNodeB
None
AAU AAU
ULFREQ BER
UL Freq Bit Error Rate
eNodeB eNodeB
None None
AAU
InftDetectResult
Result
eNodeB
None
AAU
SETTYPE
Set Type
eNodeB
None
AAU
THRESHOLD
Threshold
eNodeB
None
AAU
CPRI Bit Rate
CPRI Line Rate
eNodeB
None
AAU AAU
NeName SoftVer
eNodeB eNodeB
None None
AAU
HardVer
Hardware Version
eNodeB
None
AAU AAU
BtrmVer HwTestTime
eNodeB eNodeB
None None
AAU
TestResult
Test Result
eNodeB
None
AAU
DLFREQ
Downlink Frequency
eNodeB
None
AAU
ULFREQ
Uplink Frequency
eNodeB
None
RE
AdmState
LST RRU
RE
ALMPROCSW
eNodeB
ADD RRU MOD RRU LST RRU
RE
ALMPROCTHRHL D
eNodeB
RE
ALMTHRHLD
eNodeB
RE
PS
RRU Position
eNodeB
ADD RRU LST RRU
RE
RCN
RRU Chain No.
eNodeB
ADD RRU LST RRU
RE
TP
ADD RRU DSP RRUCHAINPHYTO PO LST RRU
RE
RS
RRU Work Standard
eNodeB
RE
RXNUM
eNodeB
ADD RRU MOD RRU DSP RRU LST RRU ADD RRU MOD RRU DSP RRU LST RRU DSP RRU
RE
TXNUM
eNodeB
RE
eNodeB
RE
eNodeB
DSP RRU
RE
RxMinFreq
eNodeB
None
RE
RxMaxFreq
eNodeB
None
RE
TxMinFreq
eNodeB
None
RE
TxMaxFreq
eNodeB
None
RE
eNodeB
DSP RRU
RE
eNodeB
DSP RRU
RE
UlBandwidth
eNodeB
None
RE
PATemperature
PA Temperature
eNodeB
None
RE
Temperature
None
RE
Level
Trunk Level
eNodeB
DSP RRUCHAINPHYTO PO DSP RRUCHAINPHYTO PO
RE
DeviceSerialNo
eNodeB
RE
RatType
eNodeB
DSP RRUCHAINPHYTO PO
RE
AccessDirection
Access Direction
eNodeB
DSP RRU
RE
MaxOutputOneCar
eNodeB
None
RE
MaxOutputMutiCar
eNodeB
None
RE
DlBandwidth
eNodeB
None
RE
PHYID
Physical ID.
eNodeB
None
RE
SW
eNodeB
STR RRULNKTST
RE
TM
Test Time
eNodeB
STR RRULNKTST
RE
CM
Check Mode
eNodeB
None
RE
PSP
eNodeB
None
RE
PST
eNodeB
None
RE RE
ULFREQ BER
eNodeB eNodeB
None STR RRULNKTST
RE
InftDetectResult
Result
eNodeB
None
RE
SETTYPE
Set Type
eNodeB
SET CPRITHRESHOLD SET CPRITHRESHOLD DSP CPRITHRESHOLD
RE
THRESHOLD
Threshold
eNodeB
RE
CPRI Bit Rate
CPRI Line Rate
eNodeB
DSP CPRITHRESHOLD
RE
AlarmState
Alarm Status
eNodeB
None
RE
OpState
Operational State
eNodeB
None
RE
AvailabilityStatus
Availability Status
eNodeB
None
RE
Elabel
Electronic Label
eNodeB
None
RE RE
Type Serial Number
eNodeB eNodeB
None None
RE
BoardDesc
Description
eNodeB
None
RE
BoardManu
Date of Manufacture
eNodeB
None
RE
BoardVendor
Vendor
eNodeB
None
RE
BoardIssue
Issue Number
eNodeB
None
RE
RuType
Board Type
eNodeB
None
RE RE
eNodeB eNodeB
None None
RE
ObjectType
Object Type
eNodeB
None
RE
None
RE RE
eNodeB eNodeB
None None
RE
ServiceType
Service Type
eNodeB
None
RE
DEVTYPE
DEVTYPE
eNodeB
None
RE RE
NeName SoftVer
eNodeB eNodeB
None None
RE
HardVer
Hardware Version
eNodeB
None
RE RE
BtrmVer HwTestTime
eNodeB eNodeB
None None
RE
TestResult
Test Result
eNodeB
None
RE
DLFREQ
Downlink Frequency
eNodeB
None
RE
ULFREQ
Uplink Frequency
eNodeB
None
RFU
CN
Cabinet No.
eNodeB
None
RFU
SRN
Subrack No.
eNodeB
None
RFU
SN
Slot No.
eNodeB
None
RFU
RT
RRU type
eNodeB
None
RFU
AdmState
None
RFU
AlarmState
Alarm Status
eNodeB
None
RFU
OpState
Operational State
eNodeB
None
RFU
AvailabilityStatus
Availability Status
eNodeB
None
RFU
Elabel
Electronic Label
eNodeB
None
RFU RFU
Type Serial Number
eNodeB eNodeB
None None
RFU
BoardDesc
Description
eNodeB
None
RFU
BoardManu
Date of Manufacture
eNodeB
None
RFU
BoardVendor
Vendor
eNodeB
None
RFU
BoardIssue
Issue Number
eNodeB
None
RFU
RuType
Board Type
eNodeB
None
RFU RFU
eNodeB eNodeB
None None
RFU
ObjectType
Object Type
eNodeB
None
RFU
None
RFU RFU
eNodeB eNodeB
None None
RFU
ServiceType
Service Type
eNodeB
None
RFU
DEVTYPE
DEVTYPE
eNodeB
None
RFU
ALMPROCSW
eNodeB
None
RFU
ALMPROCTHRHL D
eNodeB
None
RFU
ALMTHRHLD
eNodeB
None
RFU
PS
RRU Position
eNodeB
None
RFU
RCN
RRU Chain No.
eNodeB
None
RFU
TP
None
RFU
RS
RRU Work Standard
eNodeB
None
RFU
RXNUM
eNodeB
None
RFU
TXNUM
eNodeB
None
RFU
eNodeB
None
RFU
eNodeB
None
RFU
RxMinFreq
eNodeB
None
RFU
RxMaxFreq
eNodeB
None
RFU
TxMinFreq
eNodeB
None
RFU
TxMaxFreq
eNodeB
None
RFU
eNodeB
None
RFU
eNodeB
None
RFU
UlBandwidth
eNodeB
None
RFU
PATemperature
PA Temperature
eNodeB
None
RFU
Temperature
None
RFU
Level
Trunk Level
eNodeB
None
RFU
DeviceSerialNo
eNodeB
None
RFU
RatType
eNodeB
None
RFU
AccessDirection
Access Direction
eNodeB
None
RFU
MaxOutputOneCar
eNodeB
None
RFU
MaxOutputMutiCar
eNodeB
None
RFU
DlBandwidth
eNodeB
None
RFU
PHYID
Physical ID.
eNodeB
None
RFU
SW
eNodeB
None
RFU
TM
Test Time
eNodeB
None
RFU
CM
Check Mode
eNodeB
None
RFU
PSP
eNodeB
None
RFU
PST
eNodeB
None
RFU RFU
ULFREQ BER
eNodeB eNodeB
None None
RFU
InftDetectResult
Result
eNodeB
None
RFU
SETTYPE
Set Type
eNodeB
None
RFU
THRESHOLD
Threshold
eNodeB
None
RFU
CPRI Bit Rate
CPRI Line Rate
eNodeB
None
RFU RFU
NeName SoftVer
eNodeB eNodeB
None None
RFU
HardVer
Hardware Version
eNodeB
None
RFU RFU
BtrmVer HwTestTime
eNodeB eNodeB
None None
RFU
TestResult
Test Result
eNodeB
None
RFU
DLFREQ
Downlink Frequency
eNodeB
None
RFU
ULFREQ
Uplink Frequency
eNodeB
None
RRU
CN
Cabinet No.
eNodeB
None
RRU
SRN
Subrack No.
eNodeB
None
RRU
SN
Slot No.
eNodeB
None
RRU
RN
RRU Name
eNodeB
RRU
RT
RRU type
eNodeB
LST RRU
RRU RRU
TSTTYPE TSTTIME
Test Type Test Time
eNodeB eNodeB
None None
RRU
DELTATHRESHOL Delta Threshold D
eNodeB
None
RRU
Ant No.
Antenna Port No.
eNodeB
None
RRU
Test Result
Test Result
eNodeB
None
RRU RRU
RTWP Value
RTWP Value
eNodeB
None None
RTWP Delta Value RTWP Delta Value eNodeB
RRU
RTWP Max Value
RTWP Max Value
eNodeB
None
RRU
AdmState
None
RRU
AlarmState
Alarm Status
eNodeB
None
RRU
OpState
Operational State
eNodeB
None
RRU
AvailabilityStatus
Availability Status
eNodeB
None
RRU
Elabel
Electronic Label
eNodeB
None
RRU RRU
Type Serial Number
eNodeB eNodeB
None None
RRU
BoardDesc
Description
eNodeB
None
RRU
BoardManu
Date of Manufacture
eNodeB
None
RRU
BoardVendor
Vendor
eNodeB
None
RRU
BoardIssue
Issue Number
eNodeB
None
RRU
RuType
Board Type
eNodeB
None
RRU RRU
eNodeB eNodeB
None None
RRU
ObjectType
Object Type
eNodeB
None
RRU
None
RRU RRU
eNodeB eNodeB
None None
RRU
ServiceType
Service Type
eNodeB
None
RRU
DEVTYPE
DEVTYPE
eNodeB
None
RRU
ALMPROCSW
eNodeB
None
RRU
ALMPROCTHRHL D
eNodeB
None
RRU
ALMTHRHLD
eNodeB
None
RRU
PS
RRU Position
eNodeB
None
RRU
RCN
RRU Chain No.
eNodeB
None
RRU
TP
None
RRU
RS
RRU Work Standard
eNodeB
None
RRU
RXNUM
eNodeB
None
RRU
TXNUM
eNodeB
None
RRU
eNodeB
None
RRU
eNodeB
None
RRU
RxMinFreq
eNodeB
None
RRU
RxMaxFreq
eNodeB
None
RRU
TxMinFreq
eNodeB
None
RRU
TxMaxFreq
eNodeB
None
RRU
eNodeB
None
RRU
eNodeB
None
RRU
UlBandwidth
eNodeB
None
RRU
PATemperature
PA Temperature
eNodeB
None
RRU
Temperature
None
RRU
Level
Trunk Level
eNodeB
None
RRU
DeviceSerialNo
eNodeB
None
RRU
RatType
eNodeB
None
RRU
AccessDirection
Access Direction
eNodeB
None
RRU
MaxOutputOneCar
eNodeB
None
RRU
MaxOutputMutiCar
eNodeB
None
RRU
DlBandwidth
eNodeB
None
RRU
PHYID
Physical ID.
eNodeB
None
RRU
SW
eNodeB
None
RRU
TM
Test Time
eNodeB
None
RRU
CM
Check Mode
eNodeB
None
RRU
PSP
eNodeB
None
RRU
PST
eNodeB
None
RRU RRU
ULFREQ BER
eNodeB eNodeB
None None
RRU
InftDetectResult
Result
eNodeB
None
RRU
SETTYPE
Set Type
eNodeB
None
RRU
THRESHOLD
Threshold
eNodeB
None
RRU
CPRI Bit Rate
CPRI Line Rate
eNodeB
None
RRU RRU
NeName SoftVer
eNodeB eNodeB
None None
RRU
HardVer
Hardware Version
eNodeB
None
RRU RRU
BtrmVer HwTestTime
eNodeB eNodeB
None None
RRU
TestResult
Test Result
eNodeB
None
RRU
DLFREQ
Downlink Frequency
eNodeB
None
RRU
ULFREQ
Uplink Frequency
eNodeB
None
RRUCHAIN
RCN
RRU Chain No.
eNodeB
ADD RRUCHAIN DSP RRUCHAIN LST RRUCHAIN MOD RRUCHAIN RMV RRUCHAIN
RRUCHAIN
TT
Topo Type
eNodeB
ADD RRUCHAIN MOD RRUCHAIN DSP RRUCHAINPHYTO PO LST RRUCHAIN
RRUCHAIN
BM
Backup Mode
eNodeB
ADD RRUCHAIN MOD RRUCHAIN LST RRUCHAIN
RRUCHAIN
HCN
Head Cabinet No.
eNodeB
RRUCHAIN
HSRN
Head Subrack No.
eNodeB
RRUCHAIN
HSN
Head Slot No.
eNodeB
RRUCHAIN
HPN
Head Port No.
eNodeB
RRUCHAIN
TCN
Tail Cabinet No.
eNodeB
RRUCHAIN
TSRN
Tail Subrack No.
eNodeB
RRUCHAIN
TSN
Tail Slot No.
eNodeB
RRUCHAIN
TPN
Tail Port No.
eNodeB
RRUCHAIN
BRKPOS1
BreakPoint Position1
eNodeB
MOD RRUCHAIN LST RRUCHAIN
RRUCHAIN
BRKPOS2
BreakPoint Position2
eNodeB
MOD RRUCHAIN LST RRUCHAIN
RRUCHAIN
AT
Access Type
eNodeB
RRUCHAIN
CR
CPRI Line Rate
eNodeB
RRUCHAIN
ChainLevel
Chain Level
eNodeB
DSP RRUCHAIN
RRUCHAIN
RRUNum
RRU Number
eNodeB
DSP RRUCHAIN
RxBranch
CN
Cabinet No.
eNodeB
DSP RXBRANCH LST RXBRANCH MOD RXBRANCH
RxBranch
SRN
Subrack No.
eNodeB
RxBranch
SN
Slot No.
eNodeB
RxBranch
RXNO
RX Channel No.
eNodeB
RxBranch
RXSW
Logical Switch of RX Channel
eNodeB
MOD RXBRANCH DSP RXBRANCH LST RXBRANCH
RxBranch
ATTEN
Attenuation
eNodeB
MOD RXBRANCH DSP RXBRANCH LST RXBRANCH
RxBranch
PhyStatus
Physical Switch of RX Channel
eNodeB
DSP RXBRANCH
RxBranch
RxMinFreq1
Band 1 Minimum frequency
eNodeB
DSP RXBRANCH
RxBranch
RxMaxFreq1
Band 1 Maximum frequency
eNodeB
DSP RXBRANCH
RxBranch
UlBandwidth1
Band 1 UL Bandwidth
eNodeB
DSP RXBRANCH
RxBranch
RxMinFreq2
eNodeB
DSP RXBRANCH
RxBranch
RxMaxFreq2
eNodeB
DSP RXBRANCH
RxBranch
UlBandwidth2
Band 2 UL Bandwidth
eNodeB
DSP RXBRANCH
TxBranch
CN
Cabinet No.
eNodeB
DSP TXBRANCH DSP VSWR LOC RRUTC LST TXBRANCH MOD TXBRANCH STR VSWRTEST VER TXPOWER STR CROSFEEDTST
TxBranch
SRN
Subrack No.
eNodeB
TxBranch
SN
Slot No.
eNodeB
TxBranch
TXNO
TX Channel No.
eNodeB
TxBranch
TXSW
Logical Switch of TX Channel
eNodeB
MOD TXBRANCH DSP TXBRANCH LST TXBRANCH
TxBranch
Vswr
VSWR
eNodeB
DSP TXBRANCH DSP VSWR STR VSWRTEST
TxBranch
PhyStatus
Physical Switch of TX Channel
eNodeB
DSP TXBRANCH
TxBranch
TRVAL
Turn OutPut Power eNodeB
VER TXPOWER
TxBranch
TFREQ
Txbranch Frequency
eNodeB
STR VSWRTEST
TxBranch
TPRV
Txbranch Power Relative Value
eNodeB
STR VSWRTEST
TxBranch TxBranch TxBranch
TESTTIME SiteNo SectNo
Test Time Site No. Sector No.
STR VSWRTEST STR VSWRTEST STR CROSFEEDTST STR VSWRTEST
TxBranch
SiteName
Office Name
eNodeB
STR VSWRTEST
TxBranch
TXMAXPWR
Maximum Output Power Support Setting of the TX Channel
eNodeB
LOC RRUTC
TxBranch
Maximum Output TXMAXPWRFORD Power of the TX SP Channel
eNodeB
DSP TXBRANCH
TxBranch
MaxOutputOneCar
Maximum Output Power of TX Unit (Single Carrier)
eNodeB
DSP TXBRANCH
TxBranch
MaxOutputMutiCar
Maximum Output Power of TX Unit (Multiple Carriers)
eNodeB
DSP TXBRANCH
TxBranch
TXHWMAXPWR
Hardware Maximum Output Power of the eNodeB TX Channel
DSP TXBRANCH
TxBranch
TxMinFreq1
eNodeB
DSP TXBRANCH
TxBranch
TxMaxFreq1
eNodeB
DSP TXBRANCH
TxBranch
DlBandwidth1
Band 1 DL Bandwidth
eNodeB
DSP TXBRANCH
TxBranch
TxMinFreq2
eNodeB
DSP TXBRANCH
TxBranch
TxMaxFreq2
eNodeB
DSP TXBRANCH
TxBranch
DlBandwidth2
Band 2 DL Bandwidth
eNodeB
DSP TXBRANCH
TxBranch
STFREQ
Start Test Frequency
eNodeB
STR CROSFEEDTST STR CROSFEEDTST STR CROSFEEDTST ADD NTPC MOD NTPC RMV NTPC SET MASTERNTPS
TxBranch
ETFREQ
End Test Frequency eNodeB
TxBranch
CrossTestResult
RESULT
eNodeB
NtpCp
IP
IPv4 Address of NTP Server
eNodeB
NtpCp
SYNCCYCLE
Synchronization Period
eNodeB
ADD NTPC MOD NTPC LST NTPC
NtpCp
PORT
Port Number
eNodeB
ADD NTPC MOD NTPC LST NTPC ADD NTPC MOD NTPC RMV NTPC SET MASTERNTPS ADD NTPC MOD NTPC RMV NTPC SET MASTERNTPS ADD NTPC MOD NTPC LST NTPC
NtpCp
MODE
IP Mode
eNodeB
NtpCp
IPV6
IPv6 Address of NTP Server
eNodeB
NtpCp
AUTHMODE
Authentication Mode
eNodeB
NtpCp
KEY
Authentication Key
eNodeB
NtpCp
KEYID
Authentication Key Index
eNodeB
NtpCp
MASTERFLAG
Master Flag
eNodeB
LST NTPC
TZ
ZONET
Time Zone
eNodeB
SET TZ LST TZ
TZ
DST
Dst Tag Information eNodeB
SET TZ
TZ
SM
Dst Start Mode
eNodeB
SET TZ
TZ
SMONTH
Dst Start Month
eNodeB
SET TZ
TZ
SDAY
Dst Start Day
eNodeB
SET TZ
TZ
SWSEQ
Dst Start Week Sequence
eNodeB
SET TZ
TZ
SWEEK
Dst Start Weekday eNodeB
SET TZ
TZ
ST
Dst Start Time
eNodeB
SET TZ
TZ
EM
Dst End Mode
eNodeB
SET TZ
TZ
EMONTH
Dst End Month
eNodeB
SET TZ
TZ
EDAY
Dst End Day
eNodeB
SET TZ
TZ
EWSEQ
Dst End Week Sequence
eNodeB
SET TZ
TZ
EWEEK
Dst End Weekday
eNodeB
SET TZ
TZ
ET
Dst End Time
eNodeB
SET TZ
TZ
TO
DST Offset
eNodeB
SET TZ
TZ
TIMEDIFF
Time Difference
eNodeB
SET TZ
OmuCurTime
DATE
Date
eNodeB
SET TIME
OmuCurTime
TIME
Time
eNodeB
SET TIME
OmuCurTime
DATETIME
Time
eNodeB
DSP TIME
TimeSrc
TIMESRC
Time Source
eNodeB
SET TIMESRC DSP TIMESRC LST LATESTSUCCDAT E LST TIMESRC
TimeSrc
DATETIME
Latest Successful Synchronization Time
eNodeB
LST LATESTSUCCDAT E
FTPCLTPORT
SERVERIP
FTP Server IP Address
eNodeB
ADD FTPSCLTDPORT MOD FTPSCLTDPORT RMV FTPSCLTDPORT LST FTPSCLTDPORT ADD FTPSCLTDPORT MOD FTPSCLTDPORT LST FTPSCLTDPORT ADD CNOPERATOREX TENDEDQCI LST CNOPERATOREX TENDEDQCI MOD CNOPERATOREX TENDEDQCI RMV CNOPERATOREX TENDEDQCI ADD CNOPERATOREX TENDEDQCI LST CNOPERATOREX TENDEDQCI MOD CNOPERATOREX TENDEDQCI RMV CNOPERATOREX TENDEDQCI ADD CNOPERATOREX TENDEDQCI MOD CNOPERATOREX TENDEDQCI LST CNOPERATOREX TENDEDQCI
FTPCLTPORT
PORT
Destination Port
eNodeB
CnOperatorExtendedQci CnOperatorId
CN Operator ID
eNodeB
CnOperatorExtendedQci ExtendedQci
CN Operator extended QCI
eNodeB
Service-based interServiceIrHoCfgGro CnOperatorExtendedQci RAT handover eNodeB upId policy group ID
Service-based interServiceIfHoCfgGrou CnOperatorExtendedQci Freq handover eNodeB pId policy group ID
ADD CNOPERATOREX TENDEDQCI MOD CNOPERATOREX TENDEDQCI LST CNOPERATOREX TENDEDQCI LST CNOPERATORST ANDARDQCI MOD CNOPERATORST ANDARDQCI
CnOperatorStandardQci CnOperatorId
CN Operator ID
eNodeB
CnOperatorStandardQci Qci
QoS Class Indication
eNodeB
LST CNOPERATORST ANDARDQCI MOD CNOPERATORST ANDARDQCI
Service-based interServiceIrHoCfgGro CnOperatorStandardQci RAT handover eNodeB upId policy group ID
MOD CNOPERATORST ANDARDQCI LST CNOPERATORST ANDARDQCI MOD CNOPERATORST ANDARDQCI LST CNOPERATORST ANDARDQCI LST CSFALLBACKBLIN DHOCFG MOD CSFALLBACKBLIN DHOCFG
Service-based interServiceIfHoCfgGrou CnOperatorStandardQci Freq handover eNodeB pId policy group ID
CSFallBackBlindHoCfg CnOperatorId
CN Operator ID
eNodeB
CSFallBackBlindHoCfg InterRatHighestPri
Highest priority InterRat
eNodeB
MOD CSFALLBACKBLIN DHOCFG LST CSFALLBACKBLIN DHOCFG
CSFallBackBlindHoCfg InterRatSecondPri
Second priority InterRat
eNodeB
CSFallBackBlindHoCfg InterRatLowestPri
Lowest priority InterRat
eNodeB
CSFallBackBlindHoCfg UtranLcsCap
UTRAN LCS capability
eNodeB
MOD CSFALLBACKBLIN DHOCFG LST CSFALLBACKBLIN DHOCFG MOD CSFALLBACKBLIN DHOCFG LST CSFALLBACKBLIN DHOCFG MOD CSFALLBACKBLIN DHOCFG LST CSFALLBACKBLIN DHOCFG ADD INTERPLMNHOLIS T LST INTERPLMNHOLIS T RMV INTERPLMNHOLIS T
CSFallBackBlindHoCfg GeranLcsCap
GERAN LCS capability
eNodeB
CSFallBackBlindHoCfg CdmaLcsCap
CDMA2000 LCS capability
eNodeB
InterPlmnHoList
CnOperatorId
CN Operator ID
eNodeB
InterPlmnHoList
TarMcc
Target Mobile country code
eNodeB
ADD INTERPLMNHOLIS T LST INTERPLMNHOLIS T RMV INTERPLMNHOLIS T
InterPlmnHoList
TarMnc
Target Mobile network code
eNodeB
ADD INTERPLMNHOLIS T LST INTERPLMNHOLIS T RMV INTERPLMNHOLIS T
RatFreqPriorityGrou RAT frequency RatFreqPriorityGroup pId priority group ID
eNodeB
ADD RATFREQPRIORIT YGROUP LST RATFREQPRIORIT YGROUP MOD RATFREQPRIORIT YGROUP RMV RATFREQPRIORIT YGROUP
RatFreqPriorityGroupRatType
RAT Type
eNodeB
ADD RATFREQPRIORIT YGROUP LST RATFREQPRIORIT YGROUP MOD RATFREQPRIORIT YGROUP RMV RATFREQPRIORIT YGROUP ADD RATFREQPRIORIT YGROUP LST RATFREQPRIORIT YGROUP MOD RATFREQPRIORIT YGROUP RMV RATFREQPRIORIT YGROUP
RatFreqPriorityGroupDlEarfcn
Downlink EARFCN eNodeB
RatFreqPriorityGroupPriority
Priority
eNodeB
ADD RATFREQPRIORIT YGROUP MOD RATFREQPRIORIT YGROUP LST RATFREQPRIORIT YGROUP
RatFreqPriorityGroupBandIndicator
GERAN Frequency eNodeB Indicator
ADD RATFREQPRIORIT YGROUP MOD RATFREQPRIORIT YGROUP LST RATFREQPRIORIT YGROUP
ServiceIfHoCfgGroupCnOperatorId
CN Operator ID
eNodeB
ADD SERVICEIFHOCFG GROUP LST SERVICEIFHOCFG GROUP MOD SERVICEIFHOCFG GROUP RMV SERVICEIFHOCFG GROUP ADD SERVICEIFHOCFG GROUP LST SERVICEIFHOCFG GROUP MOD SERVICEIFHOCFG GROUP RMV SERVICEIFHOCFG GROUP
Service-based interServiceIfHoCfgGrou ServiceIfHoCfgGroup Freq handover eNodeB pId policy group ID
ServiceIfHoCfgGroupInterFreqHoState
Inter-Freq handover eNodeB state
ADD SERVICEIFHOCFG GROUP MOD SERVICEIFHOCFG GROUP LST SERVICEIFHOCFG GROUP
ServiceIfHoCfgGroupDlEarfcn
ADD SERVICEIFHOCFG GROUP MOD SERVICEIFHOCFG GROUP LST SERVICEIFHOCFG GROUP ADD SERVICEIRHOCF GGROUP LST SERVICEIRHOCF GGROUP MOD SERVICEIRHOCF GGROUP RMV SERVICEIRHOCF GGROUP ADD SERVICEIRHOCF GGROUP LST SERVICEIRHOCF GGROUP MOD SERVICEIRHOCF GGROUP RMV SERVICEIRHOCF GGROUP ADD SERVICEIRHOCF GGROUP MOD SERVICEIRHOCF GGROUP LST SERVICEIRHOCF GGROUP
ServiceIrHoCfgGroupCnOperatorId
CN Operator ID
eNodeB
Service-based interServiceIrHoCfgGro ServiceIrHoCfgGroup RAT handover eNodeB upId policy group ID
ServiceIrHoCfgGroupInterRatHoState
Inter-RAT handover eNodeB state
SpidCfg
Spid
Spid
eNodeB
ADD SPIDCFG LST SPIDCFG MOD SPIDCFG RMV SPIDCFG
SpidCfg
DrxStatus
Drx status
eNodeB
ADD SPIDCFG MOD SPIDCFG LST SPIDCFG
SpidCfg
RatFreqPriorityInd
RAT frequency priority indication
eNodeB
SpidCfg
RatFreqPriorityGrou RAT frequency pId priority group ID
eNodeB
SpidCfg
PreallocationStatus PreallocationStatus eNodeB
SpidCfg
InterFreqMlbSwitch
InterFreq Mlb Switch
eNodeB
SpidCfg
InterRatMlbSwitch
InterRat Mlb Switch eNodeB
SpidCfg
SPID-based HoBackToHPLMNS Handover Back To witch HPLMN Switch
eNodeB
CounterCheckPara CounterCheckTimer Counter check timer eNodeB
MOD COUNTERCHECK PARA LST COUNTERCHECK PARA
CounterCheckPara
CounterCheckCoun Counter check tNum count number
eNodeB
CounterCheckPara
CounterCheckUser Counter check user eNodeB RelSwitch Release switch
ENodeBCipherCap PrimaryCipherAlgo
Primary cipher algorithm
eNodeB
MOD ENODEBCIPHERC AP LST ENODEBCIPHERC AP
ENodeBCipherCap SecondCipherAlgo
Second cipher algorithm
eNodeB
ENodeBCipherCap ThirdCipherAlgo
Third cipher algorithm
eNodeB
S1MessageWaiting S1 Message ENodeBConnStateTimer Timer Waiting Timer
eNodeB
MOD ENODEBCONNST ATETIMER LST ENODEBCONNST ATETIMER
X2MessageWaiting X2 Message ENodeBConnStateTimer Timer Waiting Timer
eNodeB
UuMessageWaiting UU Message ENodeBConnStateTimer Timer Waiting Timer
eNodeB
ENodeBIntegrityCap PrimaryIntegrityAlgo
Primary integrity algorithm
eNodeB
MOD ENODEBINTEGRIT YCAP LST ENODEBINTEGRIT YCAP
ENodeBIntegrityCap SecondIntegrityAlgo
Second integrity algorithm
eNodeB
ENodeBIntegrityCap ThirdIntegrityAlgo
Third integrity algorithm
eNodeB
GlobalProcSwitch
X2SonSetupSwitch
The Switch of X2 setup by SON
eNodeB
MOD GLOBALPROCSWI TCH LST GLOBALPROCSWI TCH
GlobalProcSwitch
X2SonLinkSetupTy The method of X2 pe setup by SON
eNodeB
GlobalProcSwitch
SriAdaptiveSwitch
SRI adaptive switch eNodeB
GlobalProcSwitch
LcgProfile
LCG Profile
eNodeB
GlobalProcSwitch
RncPoolHoRimSwit RNC POOL HO ch RIM Switch
eNodeB
GlobalProcSwitch
UU Message UuMsgSimulSendS Simultaneous witch Sending Switch
eNodeB
GlobalProcSwitch
Update eNB X2BasedUptENode Configuration Via BCfgSwitch X2 Switch
eNodeB
PdcpRohcPara
RohcSwitch
ROHC switch
eNodeB
MOD PDCPROHCPARA LST PDCPROHCPARA
PdcpRohcPara
HighestMode
ROHC Highest mode
eNodeB
PdcpRohcPara
Profiles
Compression profiles
eNodeB
RrcConnStateTimer T302
Timer302
eNodeB
MOD RRCCONNSTATET IMER LST RRCCONNSTATET IMER
RrcConnStateTimer
T320ForLoadBalan Timer320 for load ce balance
eNodeB
RrcConnStateTimer T304ForEutran
Timer304 for EUTRAN
eNodeB
RrcConnStateTimer T304ForGeran
Timer304 for GERAN
eNodeB
RrcConnStateTimer T320ForOther
Timer320 for other
eNodeB
RrcConnStateTimer UeInactiveTimer
Ue inactive timer
eNodeB
RrcConnStateTimer UlSynTimer
UlSynTimer
eNodeB
TceIpMapping
TceId
TCE ID
eNodeB
ADD TCEIPMAPPING LST TCEIPMAPPING MOD TCEIPMAPPING RMV TCEIPMAPPING ADD TCEIPMAPPING MOD TCEIPMAPPING LST TCEIPMAPPING ADD TCEIPMAPPING MOD TCEIPMAPPING LST TCEIPMAPPING
TceIpMapping
IPMode
IP Mode
eNodeB
TceIpMapping
TceIpV4Addr
TCE IPv4 Address
eNodeB
TceIpMapping
TceIpV6Addr
TCE IPv6 Address
eNodeB
ADD TCEIPMAPPING MOD TCEIPMAPPING LST TCEIPMAPPING LST CELLDLPCPDSCH PA MOD CELLDLPCPDSCH PA
CellDlpcPdschPa
LocalCellId
Local cell ID
eNodeB
CellDlpcPdschPa
PdschPaAdjSwitch PA adjusting switch eNodeB
MOD CELLDLPCPDSCH PA LST CELLDLPCPDSCH PA
CellDlpcPdschPa
PaPcOff
PA for even power distribution
eNodeB
MOD CELLDLPCPDSCH PA LST CELLDLPCPDSCH PA
CellDrxPara
LocalCellId
Local cell ID
eNodeB
LST CELLDRXPARA MOD CELLDRXPARA
CellDrxPara
FddEnterDrxThd
FDD enter DRX threshold
eNodeB
MOD CELLDRXPARA LST CELLDRXPARA
CellDrxPara
FddExitDrxThd
FDD exit DRX threshold
eNodeB
CellDrxPara
TddEnterDrxThdUl
TDD enter DRX threshold Uplink
eNodeB
CellDrxPara
TddExitDrxThdUl
TDD exit DRX threshold Uplink
eNodeB
CellDrxPara
TddEnterDrxThdDl
TDD enter DRX eNodeB threshold Downlink
CellDrxPara
TddExitDrxThdDl
TDD exit DRX eNodeB threshold Downlink
CellDrxPara
DataAmountStatTim Data amount er Statistic timer
eNodeB
CellUlpcDedic
LocalCellId
Local cell ID
eNodeB
LST CELLULPCDEDIC MOD CELLULPCDEDIC
CellUlpcDedic
DeltaMcsEnabled
Delta-MCS enable eNodeB or disable indication
MOD CELLULPCDEDIC LST CELLULPCDEDIC
CellUlpcDedic
Power Offset of PSrsOffsetDeltaMc SRS to PUSCH with eNodeB sDisable DeltaMcsEnabled Off
CellUlpcDedic
Power Offset of PSrsOffsetDeltaMc SRS to PUSCH with eNodeB sEnable DeltaMcsEnabled On
CellUlpcDedic
FilterRsrp
RSRP filtering coefficient
eNodeB
DistBasedHO
LocalCellId
Local cell ID
eNodeB
LST DISTBASEDHO MOD DISTBASEDHO
DistBasedHO
Distance-based DistBasedMeasObj Measurement Type Object Type
eNodeB
MOD DISTBASEDHO LST DISTBASEDHO
DistBasedHO
DistBasedHOThd
Distance-based Handover Threshold
eNodeB
MOD DISTBASEDHO LST DISTBASEDHO
DrxParaGroup
LocalCellId
Local cell ID
eNodeB
ADD DRXPARAGROUP LST DRXPARAGROUP MOD DRXPARAGROUP RMV DRXPARAGROUP ADD DRXPARAGROUP LST DRXPARAGROUP MOD DRXPARAGROUP RMV DRXPARAGROUP
DrxParaGroup
DrxParaGroupId
DRX parameter group ID
eNodeB
DrxParaGroup
EnterDrxSwitch
Enter DRX Switch
eNodeB
ADD DRXPARAGROUP MOD DRXPARAGROUP LST DRXPARAGROUP
DrxParaGroup
OnDurationTimer
On Duration Timer
eNodeB
DrxParaGroup
DrxInactivityTimer
DRX Inactivity Timer
eNodeB
DrxParaGroup
DrxReTxTimer
DRX Retransmission Timer
eNodeB
DrxParaGroup
LongDrxCycle
Long DRX Cycle
eNodeB
DrxParaGroup
SupportShortDrx
Short-cycle DRX eNodeB supported indication
DrxParaGroup
ShortDrxCycle
Short DRX Cycle
eNodeB
DrxParaGroup
DrxShortCycleTimer
DRX Short Cycle Timer
eNodeB
InterRatHoCommGroup LocalCellId
Local cell ID
eNodeB
ADD INTERRATHOCOM MGROUP LST INTERRATHOCOM MGROUP MOD INTERRATHOCOM MGROUP RMV INTERRATHOCOM MGROUP ADD INTERRATHOCOM MGROUP LST INTERRATHOCOM MGROUP MOD INTERRATHOCOM MGROUP RMV INTERRATHOCOM MGROUP
InterRatHoCommGr InterRAT handover InterRatHoCommGroup eNodeB oupId common group ID
InterRatHoA1A2Hys InterRAT A1A2 InterRatHoCommGroup t hysteresis
eNodeB
ADD INTERRATHOCOM MGROUP MOD INTERRATHOCOM MGROUP LST INTERRATHOCOM MGROUP
InterRatHoA1A2Tim InterRAT A1A2 time InterRatHoCommGroup eNodeB eToTrig to trigger
InterRatHoA1ThdRs InterRAT A1 RSRP InterRatHoCommGroup eNodeB rp trigger threshold
InterRatHoA1ThdRs InterRAT A1 RSRQ InterRatHoCommGroup eNodeB rq trigger threshold
InterRatHoA2ThdRs InterRAT A2 RSRP InterRatHoCommGroup eNodeB rp trigger threshold
InterRatHoA2ThdRs InterRAT A2 RSRQ InterRatHoCommGroup eNodeB rq trigger threshold
BlindHoA2ThdOffse Blind HO A2 InterRatHoCommGroup t Threshold Offset
eNodeB
ADD INTERRATHOCOM MGROUP MOD INTERRATHOCOM MGROUP LST INTERRATHOCOM MGROUP ADD INTERRATHOCDM A1XRTTGROUP LST INTERRATHOCDM A1XRTTGROUP MOD INTERRATHOCDM A1XRTTGROUP RMV INTERRATHOCDM A1XRTTGROUP ADD INTERRATHOCDM A1XRTTGROUP LST INTERRATHOCDM A1XRTTGROUP MOD INTERRATHOCDM A1XRTTGROUP RMV INTERRATHOCDM A1XRTTGROUP
InterRatHoCdma1xRttGroup LocalCellId
Local cell ID
eNodeB
InterRAT handover InterRatHoCdma1x to InterRatHoCdma1xRttGroup eNodeB RttGroupId CDMA20001xRTT group ID
InterRatHoCdmaB1 CDMA20001XRTT InterRatHoCdma1xRttGroup eNodeB Hyst handover hysteresis
ADD INTERRATHOCDM A1XRTTGROUP MOD INTERRATHOCDM A1XRTTGROUP LST INTERRATHOCDM A1XRTTGROUP
CoverageBased InterRatHoCdmaB1 InterRatHoCdma1xRttGroup CDMA20001XRTT ThdPs trigger threshold
eNodeB
InterRatHoCdmaB1 CDMA20001XRTT InterRatHoCdma1xRttGroup TimeToTrig time to trigger
eNodeB
Load Service Based LdSvBasedHoCdm InterRatHoCdma1xRttGroup CDMA20001XRTT eNodeB aB1ThdPs trigger threshold
CellExtendedQci
ExtendedQci
Extended QCI
eNodeB
ADD CELLEXTENDEDQ CI LST CELLEXTENDEDQ CI MOD CELLEXTENDEDQ CI RMV CELLEXTENDEDQ CI ADD CELLEXTENDEDQ CI LST CELLEXTENDEDQ CI MOD CELLEXTENDEDQ CI RMV CELLEXTENDEDQ CI ADD CELLEXTENDEDQ CI MOD CELLEXTENDEDQ CI LST CELLEXTENDEDQ CI ADD CELLEXTENDEDQ CI MOD CELLEXTENDEDQ CI LST CELLEXTENDEDQ CI ADD CELLEXTENDEDQ CI MOD CELLEXTENDEDQ CI LST CELLEXTENDEDQ CI
CellExtendedQci
LocalCellId
Local cell ID
eNodeB
CellExtendedQci
InterFreqHoGroupId
Interfreq handover group ID
eNodeB
CellExtendedQci
InterRAT handover InterRatHoCdma1x to eNodeB RttGroupId CDMA20001xRTT group ID
CellExtendedQci
InterRAT handover InterRatHoCdmaHr to eNodeB pdGroupId CDMA2000HRPD group ID
CellExtendedQci
InterRatHoCommGr InterRAT handover eNodeB oupId common group ID
ADD CELLEXTENDEDQ CI MOD CELLEXTENDEDQ CI LST CELLEXTENDEDQ CI ADD CELLEXTENDEDQ CI MOD CELLEXTENDEDQ CI LST CELLEXTENDEDQ CI ADD CELLEXTENDEDQ CI MOD CELLEXTENDEDQ CI LST CELLEXTENDEDQ CI ADD CELLEXTENDEDQ CI MOD CELLEXTENDEDQ CI LST CELLEXTENDEDQ CI ADD CELLEXTENDEDQ CI MOD CELLEXTENDEDQ CI LST CELLEXTENDEDQ CI LST CELLSTANDARDQ CI MOD CELLSTANDARDQ CI
CellExtendedQci
InterRatHoGeranGr InterRAT handover eNodeB oupId to GERAN group ID
CellExtendedQci
InterRatHoUtranGro InterRAT handover eNodeB upId to UTRAN Group ID
CellExtendedQci
IntraFreqHoGroupId
Intrafreq handover group ID
eNodeB
CellExtendedQci
DrxParaGroupId
eNodeB
CellStandardQci
LocalCellId
Local cell ID
eNodeB
CellStandardQci
Qci
eNodeB
LST CELLSTANDARDQ CI MOD CELLSTANDARDQ CI
CellStandardQci
InterFreqHoGroupId
eNodeB
MOD CELLSTANDARDQ CI LST CELLSTANDARDQ CI MOD CELLSTANDARDQ CI LST CELLSTANDARDQ CI MOD CELLSTANDARDQ CI LST CELLSTANDARDQ CI
CellStandardQci
InterRAT handover InterRatHoCdma1x to eNodeB RttGroupId CDMA20001xRTT group ID
CellStandardQci
InterRAT handover InterRatHoCdmaHr to eNodeB pdGroupId CDMA2000HRPD group ID
CellStandardQci
InterRatHoCommGr InterRAT handover eNodeB oupId common group ID
MOD CELLSTANDARDQ CI LST CELLSTANDARDQ CI
CellStandardQci
InterRatHoGeranGr InterRAT handover eNodeB oupId to GERAN group ID
CellStandardQci
InterRatHoUtranGro InterRAT handover eNodeB upId to UTRAN Group ID
MOD CELLSTANDARDQ CI LST CELLSTANDARDQ CI MOD CELLSTANDARDQ CI LST CELLSTANDARDQ CI MOD CELLSTANDARDQ CI LST CELLSTANDARDQ CI
CellStandardQci
IntraFreqHoGroupId
eNodeB
CellStandardQci
DrxParaGroupId
eNodeB
CellStandardQci
SriPeriod
SRI Period
eNodeB
InterRatHoCdmaHrpdGroup LocalCellId
Local cell ID
eNodeB
ADD INTERRATHOCDM AHRPDGROUP LST INTERRATHOCDM AHRPDGROUP MOD INTERRATHOCDM AHRPDGROUP RMV INTERRATHOCDM AHRPDGROUP
InterRAT handover InterRatHoCdmaHr to InterRatHoCdmaHrpdGroup eNodeB pdGroupId CDMA2000HRPD group ID
ADD INTERRATHOCDM AHRPDGROUP LST INTERRATHOCDM AHRPDGROUP MOD INTERRATHOCDM AHRPDGROUP RMV INTERRATHOCDM AHRPDGROUP
InterRatHoCdmaB1 CDMA2000HRPD InterRatHoCdmaHrpdGroup eNodeB Hyst handover hysteresis
ADD INTERRATHOCDM AHRPDGROUP MOD INTERRATHOCDM AHRPDGROUP LST INTERRATHOCDM AHRPDGROUP
CoverageBased InterRatHoCdmaB1 InterRatHoCdmaHrpdGroup CDMA2000HRPD ThdPs trigger threshold
eNodeB
InterRatHoCdmaB1 CDMA2000HRPD InterRatHoCdmaHrpdGroup TimeToTrig time to trigger
eNodeB
Load Service Based LdSvBasedHoCdm InterRatHoCdmaHrpdGroup CDMA2000HRPD eNodeB aB1ThdPs trigger threshold
InterRatHoGeranGroup LocalCellId
Local cell ID
eNodeB
ADD INTERRATHOGER ANGROUP LST INTERRATHOGER ANGROUP MOD INTERRATHOGER ANGROUP RMV INTERRATHOGER ANGROUP ADD INTERRATHOGER ANGROUP LST INTERRATHOGER ANGROUP MOD INTERRATHOGER ANGROUP RMV INTERRATHOGER ANGROUP
InterRatHoGeranGr InterRAT handover InterRatHoGeranGroup eNodeB oupId to GERAN group ID
InterRatHoGeranB1 GERAN handover InterRatHoGeranGroup Hyst hysteresis
eNodeB
ADD INTERRATHOGER ANGROUP MOD INTERRATHOGER ANGROUP LST INTERRATHOGER ANGROUP
CoverageBased InterRatHoGeranB1 InterRatHoGeranGroup GERAN trigger Thd threshold
eNodeB
InterRatHoGeranB1 GERAN time to InterRatHoGeranGroup TimeToTrig trigger
eNodeB
Load Service Based LdSvBasedHoGera InterRatHoGeranGroup Geran EventB1 eNodeB nB1Thd trigger threshold
InterRatHoUtranGroup LocalCellId
Local cell ID
eNodeB
ADD INTERRATHOUTR ANGROUP LST INTERRATHOUTR ANGROUP MOD INTERRATHOUTR ANGROUP RMV INTERRATHOUTR ANGROUP ADD INTERRATHOUTR ANGROUP LST INTERRATHOUTR ANGROUP MOD INTERRATHOUTR ANGROUP RMV INTERRATHOUTR ANGROUP
InterRatHoUtranGro InterRAT handover InterRatHoUtranGroup eNodeB upId to UTRAN Group ID
CoverageBased InterRatHoUtranB1 InterRatHoUtranGroup UTRAN ECN0 ThdEcn0 trigger threshold
eNodeB
ADD INTERRATHOUTR ANGROUP MOD INTERRATHOUTR ANGROUP LST INTERRATHOUTR ANGROUP
CoverageBased InterRatHoUtranB1 InterRatHoUtranGroup UTRAN RSCP ThdRscp trigger threshold
eNodeB
InterRatHoUtranB1 UTRAN handover InterRatHoUtranGroup Hyst hysteresis
eNodeB
InterRatHoUtranB1 UTRAN time to InterRatHoUtranGroup TimeToTrig trigger
eNodeB
Load Service Based LdSvBasedHoUtran InterRatHoUtranGroup UTRANB1 ECN0 eNodeB B1ThdEcn0 threshold
Load Service Based LdSvBasedHoUtran UTRAN EventB1 InterRatHoUtranGroup eNodeB B1ThdRscp RSCP trigger threshold
InterFreqHoGroup
LocalCellId
Local cell ID
eNodeB
ADD INTERFREQHOGR OUP LST INTERFREQHOGR OUP MOD INTERFREQHOGR OUP RMV INTERFREQHOGR OUP ADD INTERFREQHOGR OUP LST INTERFREQHOGR OUP MOD INTERFREQHOGR OUP RMV INTERFREQHOGR OUP
InterFreqHoGroup
InterFreqHoGroupId
eNodeB
InterFreqHoGroup
InterFreqHoA1A2Hy Interfreq A1A2 st hysteresis
eNodeB
ADD INTERFREQHOGR OUP MOD INTERFREQHOGR OUP LST INTERFREQHOGR OUP
InterFreqHoGroup
InterFreqHoA1A2Ti Interfreq A1A2 time eNodeB meToTrig to trigger
InterFreqHoGroup
InterFreqHoA1ThdR Interfreq A1 RSRP srp threshold
eNodeB
InterFreqHoGroup
InterFreqHoA1ThdR Interfreq A1 RSRQ eNodeB srq threshold
InterFreqHoGroup
InterFreqHoA2ThdR Interfreq A2 RSRP srp threshold
eNodeB
InterFreqHoGroup
InterFreqHoA2ThdR Interfreq A2 RSRQ eNodeB srq threshold
InterFreqHoGroup
InterFreqHoA4Hyst
Interfreq handover hysteresis
eNodeB
InterFreqHoGroup
CoverageBased InterFreqHoA4ThdR Interfreq RSRP srp threshold
eNodeB
InterFreqHoGroup
CoverageBased InterFreqHoA4ThdR Interfreq RSRQ srq threshold
eNodeB
InterFreqHoGroup
InterFreqHoA4Time Interfreq HandOver eNodeB ToTrig Time to Trigger
InterFreqHoGroup
Load Based InterFreqLoadBase Interfreq RSRP dHoA4ThdRsrp threshold
eNodeB
InterFreqHoGroup
Load Based InterFreqLoadBase Interfreq RSRQ dHoA4ThdRsrq threshold
eNodeB
InterFreqHoGroup
Freq Priority Based FreqPriInterFreqHo Interfreq A1 RSRP eNodeB A1ThdRsrp threshold
InterFreqHoGroup
Freq Priority Based FreqPriInterFreqHo Interfreq A1 RSRQ eNodeB A1ThdRsrq threshold
InterFreqHoGroup
InterFreqHoA3Offse Interfreq A3 offset t
eNodeB
InterFreqHoGroup
A3InterFreqHoA1Th A3 based interfreq eNodeB dRsrp A1 RSRP threshold
InterFreqHoGroup
A3InterFreqHoA2Th A3 based Interfreq eNodeB dRsrp A2 RSRP threshold
InterFreqHoGroup
Freq Priority Based FreqPriInterFreqHo Interfreq A2 RSRP eNodeB A2ThdRsrp threshold
InterFreqHoGroup
Freq Priority Based FreqPriInterFreqHo Interfreq A2 RSRQ eNodeB A2ThdRsrq threshold
ADD INTERFREQHOGR OUP MOD INTERFREQHOGR OUP LST INTERFREQHOGR OUP ADD INTRAFREQHOGR OUP LST INTRAFREQHOGR OUP MOD INTRAFREQHOGR OUP RMV INTRAFREQHOGR OUP ADD INTRAFREQHOGR OUP LST INTRAFREQHOGR OUP MOD INTRAFREQHOGR OUP RMV INTRAFREQHOGR OUP
IntraFreqHoGroup
LocalCellId
Local cell ID
eNodeB
IntraFreqHoGroup
IntraFreqHoGroupId
eNodeB
IntraFreqHoGroup
IntraFreqHoA3Hyst
Intrafreq handover hysteresis
eNodeB
ADD INTRAFREQHOGR OUP MOD INTRAFREQHOGR OUP LST INTRAFREQHOGR OUP
IntraFreqHoGroup
IntraFreqHoA3Offse Intrafreq handover t offset
eNodeB
IntraFreqHoGroup
IntraFreqHoA3Time Intrafreq handover ToTrig time to trigger
eNodeB
CnOperator
CnOperatorId
CN Operator ID
eNodeB
ADD CNOPERATOR LST CNOPERATOR MOD CNOPERATOR RMV CNOPERATOR
CnOperator
CnOperatorName
CN Operator name eNodeB
ADD CNOPERATOR MOD CNOPERATOR LST CNOPERATOR
CnOperator
CnOperatorType
CN Operator type
eNodeB
CnOperator
Mcc
Mobile country code eNodeB
CnOperator
Mnc
Mobile network code
eNodeB
CnOperatorIpPath
IpPathId
IP path ID
eNodeB
ADD CNOPERATORIPP ATH LST CNOPERATORIPP ATH MOD CNOPERATORIPP ATH RMV CNOPERATORIPP ATH ADD CNOPERATORIPP ATH MOD CNOPERATORIPP ATH LST CNOPERATORIPP ATH ADD CNOPERATORTA LST CNOPERATORTA MOD CNOPERATORTA RMV CNOPERATORTA ADD CNOPERATORTA MOD CNOPERATORTA LST CNOPERATORTA
CnOperatorIpPath
CnOperatorId
CN Operator ID
eNodeB
CnOperatorTa
TrackingAreaId
Tracking area ID
eNodeB
CnOperatorTa
CnOperatorId
CN Operator ID
eNodeB
CnOperatorTa
Tac
Tracking area code eNodeB
ADD CNOPERATORTA MOD CNOPERATORTA LST CNOPERATORTA
Emc
CnOperatorId
CN Operator ID
eNodeB
LST EMC MOD EMC
Emc
EmcEnable
Emergency call enabled switch
eNodeB
MOD EMC LST EMC
Emc
Emergency call EmcEnableInLimite enabled switch in dMode limited mode
eNodeB
MOD EMC LST EMC
Emc
EmcDedicatedBear The ARP of EMC erARP dedicated bearer
eNodeB
MOD EMC LST EMC
Emc
EmcDefaultBearerA The ARP of EMC RP default bearer
eNodeB
MOD EMC LST EMC
ENodeBSharingMo eNodeB sharing ENodeBSharingMode de mode
eNodeB
MOD ENODEBSHARING MODE LST ENODEBSHARING MODE
LicenseSharingPolicyCnOperatorId
CN Operator ID
eNodeB
ADD LICENSESHARING POLICY LST LICENSESHARING POLICY MOD LICENSESHARING POLICY RMV LICENSESHARING POLICY ADD LICENSESHARING POLICY MOD LICENSESHARING POLICY LST LICENSESHARING POLICY
LicenseSharingPolicyMaxUserNumRate
The proportion of the maximum number of users
eNodeB
S1ReestTimer
S1ReestMinTimer
S1 reestablish min timer length
eNodeB
MOD S1REESTTIMER LST S1REESTTIMER MOD S1REESTTIMER LST S1REESTTIMER
S1ReestTimer
S1ReestMaxTimer
S1 reestablish max eNodeB timer length
S1Interface
S1InterfaceId
S1Interface ID
eNodeB
S1Interface
S1SctpLinkId
S1 SCTP link ID
eNodeB
ADD S1INTERFACE BLK S1INTERFACE DSP S1INTERFACE MOD S1INTERFACE RMV S1INTERFACE RST S1INTERFACE ADD S1INTERFACE MOD S1INTERFACE DSP S1INTERFACE ADD S1INTERFACE MOD S1INTERFACE DSP S1INTERFACE
S1Interface
CnOperatorId
CN Operator ID
eNodeB
S1Interface
MmeRelease
MME Release
eNodeB
ADD S1INTERFACE MOD S1INTERFACE DSP S1INTERFACE
S1Interface
S1InterfaceIsBlock
S1Interface is block eNodeB
ADD S1INTERFACE MOD S1INTERFACE DSP S1INTERFACE DSP S1INTERFACE DSP S1INTERFACE DSP S1INTERFACE
S1Interface
S1InterfaceState
S1Interface state
eNodeB
S1Interface
S1SctpLinkState
S1 SCTP Link State eNodeB
S1Interface
MmeIsOverLoad
MME is overloaded eNodeB
S1Interface
S1InterfaceUserNu S1Interface user m number
eNodeB
DSP S1INTERFACE
S1Interface
MmeName
MME name
eNodeB
DSP S1INTERFACE
S1Interface
ServedPlmns
Served PLMNs
eNodeB
DSP S1INTERFACE
S1Interface
ServedGummeis
Served GUMMEIs
eNodeB
DSP S1INTERFACE
S1Interface
RelativeMmeCap
MME relative capacity
eNodeB
DSP S1INTERFACE
S1Interface
S1LinkFaultReason
S1 Link Fault Reason
eNodeB
DSP S1INTERFACE
MmeFeatureCfg
S1InterfaceId
S1Interface ID
eNodeB
LST MMEFEATURECF G MOD MMEFEATURECF G
MmeFeatureCfg
MdtEnable
MME supporting MDT or not
eNodeB
MOD MMEFEATURECF G LST MMEFEATURECF G
X2BlackWhiteList
Mcc
ADD X2BLACKWHITELI ST RMV X2BLACKWHITELI ST LST X2BLACKWHITELI ST
X2BlackWhiteList
Mnc
Mobile network code
eNodeB
ADD X2BLACKWHITELI ST RMV X2BLACKWHITELI ST LST X2BLACKWHITELI ST
X2BlackWhiteList
ENodeBId
eNodeB ID
eNodeB
ADD X2BLACKWHITELI ST RMV X2BLACKWHITELI ST LST X2BLACKWHITELI ST ADD X2BLACKWHITELI ST LST X2BLACKWHITELI ST ADD X2INTERFACE DSP X2INTERFACE MOD X2INTERFACE RMV X2INTERFACE RST ADD X2INTERFACE MOD X2INTERFACE DSP X2INTERFACE ADD X2INTERFACE MOD X2INTERFACE DSP ADD X2INTERFACE MOD X2INTERFACE DSP X2INTERFACE
X2BlackWhiteList
X2ListType
X2 Black or White List Type
eNodeB
X2Interface
X2InterfaceId
X2Interface ID
eNodeB
X2Interface
X2SctpLinkId
X2 SCTP link ID
eNodeB
X2Interface
CnOperatorId
CN Operator ID
eNodeB
X2Interface
TargetENodeBRele Target eNodeB ase release
eNodeB
X2Interface
NoAutoRmvFlag
Automatic removal flag
eNodeB
ADD X2INTERFACE MOD X2INTERFACE DSP X2INTERFACE
X2Interface
NbrENodeBId
Neighbor eNodeB ID
eNodeB
DSP X2INTERFACE
X2Interface
NbrENodeBPlmnId
Neighbor eNodeB PLMN ID
eNodeB
DSP X2INTERFACE
X2Interface
X2InterfaceState
X2Interface state
eNodeB
DSP X2INTERFACE
X2Interface
X2AbnormalReason
X2Interface state abnormal reason
eNodeB
DSP X2INTERFACE
Drx
DrxAlgSwitch
DRX switch
eNodeB
MOD DRX LST DRX
Drx
ShortDrxSwitch
Short-cycle DRX switch
eNodeB
MOD DRX LST DRX
Drx
LongDrxCycleSpeci Special long DRX al cycle
eNodeB
MOD DRX LST DRX
Drx
OnDurationTimerSp Special On Duration eNodeB ecial timer
MOD DRX LST DRX
Drx
DrxInactivityTimerS Special DRX pecial inactivity timer
eNodeB
MOD DRX LST DRX
Drx
Special short-cycle SupportShortDrxSp DRX supported eNodeB ecial indication
MOD DRX LST DRX
Drx
ShortDrxCycleSpeci Special short DRX al cycle
eNodeB
MOD DRX LST DRX
Drx
DrxShortCycleTimer Special DRX short Special cycle timer
eNodeB
MOD DRX LST DRX
Drx
LongDrxCycleForAn Long DRX Cycle for eNodeB r ANR
MOD DRX LST DRX
Drx
LongDRXCycleforIR Long DRX Cycle for eNodeB atAnr Inter-RAT ANR
MOD DRX LST DRX
ExtendedQci
ExtendedQci
Extended QoS Class Identifier
eNodeB
ADD EXTENDEDQCI LST EXTENDEDQCI MOD EXTENDEDQCI RMV EXTENDEDQCI
ExtendedQci
ServiceType
Service type
eNodeB
ADD EXTENDEDQCI MOD EXTENDEDQCI LST EXTENDEDQCI
ExtendedQci
UlschPriorityFactor
Uplink scheduling priority factor
eNodeB
ADD EXTENDEDQCI MOD EXTENDEDQCI LST EXTENDEDQCI ADD EXTENDEDQCI MOD EXTENDEDQCI LST EXTENDEDQCI
ExtendedQci
Downlink DlschPriorityFactor scheduling priority factor
eNodeB
ExtendedQci
UlMinGbr
Uplink MinGBR
eNodeB
ExtendedQci
DlMinGbr
Downlink MinGBR
eNodeB
ExtendedQci
PreAllocationWeigh Pre-allocation t weight
eNodeB
ExtendedQci
InterRatPolicyCfgGr InterRAT policy oupId config group ID
eNodeB
ExtendedQci
PrioritisedBitRate
Prioritised bit rate
eNodeB
ExtendedQci
LogicalChannelPrior Logical channel ity priority
eNodeB
ExtendedQci
RlcPdcpParaGroupI RLC PDCP eNodeB d parameter group ID
ADD EXTENDEDQCI MOD EXTENDEDQCI LST EXTENDEDQCI ADD EXTENDEDQCI MOD EXTENDEDQCI LST EXTENDEDQCI
ExtendedQci
FreeUserFlag
Free user flag
eNodeB
ExtendedQci
FlowCtrlType
Flow Control Type
eNodeB
InterRatPolicyCfgGr InterRAT policy InterRatPolicyCfgGroup oupId config group ID
eNodeB
ADD INTERRATPOLICY CFGGROUP LST INTERRATPOLICY CFGGROUP MOD INTERRATPOLICY CFGGROUP RMV INTERRATPOLICY CFGGROUP
InterRatPolicyCfgGroup UtranHoCfg
UTRAN handover eNodeB policy Configuration
ADD INTERRATPOLICY CFGGROUP MOD INTERRATPOLICY CFGGROUP LST INTERRATPOLICY CFGGROUP
InterRatPolicyCfgGroup GeranGsmHoCfg
GERAN GSM handover policy Configuration
eNodeB
GERAN GPRS GeranGprsEdgeHo InterRatPolicyCfgGroup EDGE handover eNodeB Cfg policy Configuration
InterRatPolicyCfgGroup Cdma1xRttHoCfg
CDMA2000 1XRTT handover policy eNodeB Configuration
InterRatPolicyCfgGroup CdmaHrpdHoCfg
CDMA2000 HRPD handover policy Configuration
eNodeB
InterRatPolicyCfgGroup NoHoFlag
No handover flag
eNodeB
InterRatPolicyCfgGroup NoFastAnrFlag
No fast ANR flag
eNodeB
PuschParam
Delta Offset CQI DeltaOffsetCqiIndex Index
eNodeB
MOD PUSCHPARAM LST PUSCHPARAM
PuschParam
Delta Offset RI DeltaOffsetRiIndex Index
eNodeB
PuschParam
DeltaOffsetAckInde Delta Offset eNodeB x Acknowledge Index
RlcPdcpParaGroup
ADD RLCPDCPPARAG ROUP LST RLCPDCPPARAG ROUP MOD RLCPDCPPARAG ROUP RMV RLCPDCPPARAG ROUP
RlcPdcpParaGroup DiscardTimer
Discard timer
eNodeB
ADD RLCPDCPPARAG ROUP MOD RLCPDCPPARAG ROUP LST RLCPDCPPARAG ROUP
RlcPdcpParaGroup RlcMode
RLC-UM or RLCAM mode
eNodeB
RlcPdcpParaGroup
UeMaxRetxThresho MaxretxThreshold ld for UE
eNodeB
RlcPdcpParaGroup
ENodeBMaxRetxTh MaxRetxThreshold reshold for eNodeB
eNodeB
RlcPdcpParaGroup UePollByte
PollByte for UE
eNodeB
RlcPdcpParaGroup ENodeBPollByte
PollByte for eNodeB eNodeB
RlcPdcpParaGroup UePollPdu
PollPdu for UE
eNodeB
RlcPdcpParaGroup ENodeBPollPdu
PollPdu for eNodeB eNodeB
RlcPdcpParaGroup
UePollRetransmitTi Poll retransmit timer eNodeB mer for UE
RlcPdcpParaGroup
ENodeBPollRetrans Poll retransmit timer eNodeB mitTimer for eNodeB
RlcPdcpParaGroup
UeStatusProhibitTi mer
Status prohibit timer eNodeB for UE
RlcPdcpParaGroup
ENodeBStatusProhi Status prohibit timer eNodeB bitTimer for eNodeB
RlcPdcpParaGroup
UeAmReorderingTi AM reordering timer eNodeB mer for UE
RlcPdcpParaGroup
ENodeBAmReorder AM reordering timer eNodeB ingTimer for eNodeB
RlcPdcpParaGroup PdcpSnSize
UM PDCP-SN size eNodeB
RlcPdcpParaGroup UlRlcSnSize
Uplink RLC-Sn size eNodeB
RlcPdcpParaGroup DlRlcSnSize
Downlink RLC-SN size
eNodeB
RlcPdcpParaGroup
UeUmReorderingTi UM reordering timer eNodeB mer for UE
RlcPdcpParaGroup
ENodeBUmReorder UM reordering timer eNodeB ingTimer for eNodeB
AM PDCP status RlcPdcpParaGroup PdcpStatusRptReq report required indication
eNodeB
StandardQci
Qci
eNodeB
LST STANDARDQCI MOD STANDARDQCI
StandardQci
UlschPriorityFactor Ulsch priority factor eNodeB
MOD STANDARDQCI LST STANDARDQCI
StandardQci
DlschPriorityFactor Dlsch priority factor eNodeB
StandardQci
UlMinGbr
Uplink MinGBR
eNodeB
StandardQci
DlMinGbr
Downlink MinGBR
eNodeB
StandardQci
PreAllocationWeigh Pre-allocation t weight
eNodeB
StandardQci
InterRatPolicyCfgGr InterRAT policy oupId config group ID
eNodeB
StandardQci
StandardQci
PrioritisedBitRate
Prioritised bit rate
eNodeB
StandardQci
LogicalChannelPrior Logical channel ity priority
eNodeB
StandardQci
FlowCtrlType
Flow control type
eNodeB
AlgoDefaultPara
DefDopplerLevel
Default doppler level
eNodeB
MOD ALGODEFAULTPA RA LST ALGODEFAULTPA RA
BfMimoAdaptiveSwi BfMIMO adaptive BfMimoAdaptiveParaCfg tch switch
eNodeB
MOD BFMIMOADAPTIVE PARACFG LST BFMIMOADAPTIVE PARACFG
BfMimoAdaptiveParaCfg FixedBfMimoMode
Fixed BfMIMO mode
eNodeB
MOD BFMIMOADAPTIVE PARACFG LST BFMIMOADAPTIVE PARACFG
CqiAdaptiveCfg
CqiPeriodAdaptive
CQI period adaptive eNodeB switch
MOD CQIADAPTIVECFG LST CQIADAPTIVECFG
CqiAdaptiveCfg
UserCqiPeriodCfg
User CQI period config
eNodeB
MOD CQIADAPTIVECFG LST CQIADAPTIVECFG
MimoAdaptiveSwitc MIMO adaptive MimoAdaptiveParaCfg h switch
eNodeB
MOD MIMOADAPTIVEP ARACFG LST MIMOADAPTIVEP ARACFG
MimoAdaptiveParaCfg FixedMimoMode
Fixed MIMO mode
eNodeB
MOD MIMOADAPTIVEP ARACFG LST MIMOADAPTIVEP ARACFG
SrsAdaptiveCfg
SrsPeriodAdaptive
SRS period adaptive switch
eNodeB
MOD SRSADAPTIVECF G LST SRSADAPTIVECF G
SrsAdaptiveCfg
UserSrsPeriodCfg
User SRS period config
eNodeB
MOD SRSADAPTIVECF G LST SRSADAPTIVECF G
TypDrbBsr
Qci
QoS Class Identifier eNodeB
LST TYPDRBBSR MOD TYPDRBBSR
TypDrbBsr
TPerodicBSRTimer Periodic BSR Timer eNodeB
MOD TYPDRBBSR LST TYPDRBBSR
TypDrbBsr
RetxBsrTimer
BSR Retransmission Timer
eNodeB
MOD TYPDRBBSR LST TYPDRBBSR
HoMeasComm
GapPatternType
GAP measurement eNodeB pattern
MOD HOMEASCOMM LST HOMEASCOMM
HoMeasComm
EutranFilterCoeffRs EUTRAN RSRP rp filter coefficient
eNodeB
HoMeasComm
EutranFilterCoeffRs EUTRAN RSRQ rq filter coefficient
eNodeB
HoMeasComm
GeranFilterCoeff
GERAN filter coefficient
eNodeB
HoMeasComm
SMeasureInd
SMeasureInd
eNodeB
HoMeasComm
SMeasure
SMeasure
eNodeB
HoMeasComm
SpeedDepParaInd
SpeedDependInd
eNodeB
HoMeasComm
TcrMaxConnMode
TCRmax in connected mode
eNodeB
HoMeasComm
TcrMaxHystConnM TCRmaxHyst in ode connected mode
eNodeB
HoMeasComm
NcrMediumConnMo NCR Medium in de connected mode
eNodeB
HoMeasComm
NCR High in NcrHighConnMode connected mode
eNodeB
HoMeasComm
TttSfMedium
TTT Scaling factor for Medium mobility eNodeB state in connected mode
HoMeasComm
TttSfHigh
TTT Scaling factor for High mobility state in connected mode
eNodeB
HoMeasComm
UtranFilterCoeffRsc UTRAN RSCP filter eNodeB p coefficient
HoMeasComm
UtranFilterCoeffEcn UTRAN ECN0 filter eNodeB 0 coefficient
InterRatHoComm
InterRatHoMaxRprt Max report cell Cell number
eNodeB
MOD INTERRATHOCOM M LST INTERRATHOCOM M
InterRatHoComm
InterRatHoRprtAmo Measurement report eNodeB unt amount
InterRatHoComm
Geran InterRatHoGeranRp measurement report eNodeB rtInterval interval
InterRatHoComm
InterRatHoUtranB1 Utran measurement eNodeB MeasQuan trigger quantity
InterRatHoComm
UTRAN FDD InterRatHoUtranRpr measurement report eNodeB tInterval interval
InterRatHoComm
CDMA20001XRTT InterRatHoCdma1x measurement RttB1MeasQuan trigger quantity
eNodeB
InterRatHoComm
CDMA20001XRTT InterRatCdma1xRtt measurement report eNodeB RprtInterval interval
InterRatHoComm
CDMA2000HRPD InterRatHoCdmaHr measurement pdB1MeasQuan trigger quantity
eNodeB
InterRatHoComm
CDMA2000HRPD InterRatCdmaHrpd measurement report eNodeB RprtInterval interval
InterRatHoComm
InterRat A1A2 InterRatHoA1A2Trig measurement Quan trigger quantity
eNodeB
InterRatHoComm
InterRatHoEventTy Inter RAT HO eNodeB pe Trigger Event Type
IntraRatHoComm
IntraRatHoMaxRprt Max report cell Cell number
eNodeB
MOD INTRARATHOCOM M LST INTRARATHOCOM M
IntraRatHoComm
IntraRatHoRprtAmo Measurement report eNodeB unt amount
IntraRatHoComm
IntraFreqHoA3Trig Quan
A3 measurement trigger quantity
eNodeB
IntraRatHoComm
IntraFreqHoA3Rprt A3 measurement Quan report quantity
eNodeB
IntraRatHoComm
IntraFreqHoRprtInte A3 measurement rval report interval
eNodeB
IntraRatHoComm
InterFreqHoA4Rprt Measurement A4 Quan report quantity
eNodeB
IntraRatHoComm
Interfreq InterFreqHoRprtInte measurement report eNodeB rval interval
IntraRatHoComm
InterFreq A1A2 InterFreqHoA1A2Tri Measurement gQuan trigger quantity
eNodeB
IntraRatHoComm
A1A2 Measurement FreqPriInterFreqHo trigger quantity of eNodeB A1TrigQuan Freq Priority
IntraRatHoComm
InterFreqHoA4Trig Quan
FreqPrior loadBased A4 Measurement trigger quantity
eNodeB
CSFallBackHo
LocalCellId
Local cell ID
eNodeB
LST CSFALLBACKHO MOD CSFALLBACKHO
CSFallBackHo
CSFB Utran CsfbHoUtranTimeT EventB1 Time To oTrig Trig
eNodeB
MOD CSFALLBACKHO LST CSFALLBACKHO
CSFallBackHo
CSFB Geran CsfbHoGeranTimeT EventB1 Time To oTrig Trig
eNodeB
CSFallBackHo
CSFB CDMA CsfbHoCdmaTimeT EventB1 Time To oTrig Trig
eNodeB
CSFallBackHo
CSFB UTRAN CsfbHoUtranB1Thd EventB1 RSCP Rscp Trigger Threshold
eNodeB
CSFallBackHo
CSFB UTRAN CsfbHoUtranB1Thd EventB1 ECN0 Ecn0 Trigger Threshold
eNodeB
CSFallBackHo
CSFB GERAN CsfbHoGeranB1Th EventB1 Trigger d Threshold
eNodeB
CSFallBackHo
CSFB CDMA2000 CsfbHoCdmaB1Thd EventB1 Trigger Ps Threshold
eNodeB
CellAcBar
LocalCellId
Local cell ID
eNodeB
LST CELLACBAR MOD CELLACBAR
CellAcBar
AC barring AcBarringInfoCfgIn information d configure indicator
eNodeB
MOD CELLACBAR LST CELLACBAR
CellAcBar
AcBarringForEmerg Emergency call ency barring state
eNodeB
CellAcBar
AC barring for AcBarringForMoDat mobile data aCfgInd configure indicator
eNodeB
CellAcBar
Access probability AcBarringFactorFor factor for originating eNodeB Call call
CellAcBar
AcBarTimeForCall
Mean access barring time for originating call
eNodeB
CellAcBar
AC11BarforCall
AC11 barring state for originating call
eNodeB
CellAcBar
AC12BarforCall
eNodeB
CellAcBar
AC13BarforCall
eNodeB
CellAcBar
AC14BarforCall
eNodeB
CellAcBar
AC15BarforCall
eNodeB
CellAcBar
AC barring for AcBarringForMoSig mobile signal CfgInd configure indicator
eNodeB
CellAcBar
AcBarringFactorFor Access probability Sig factor for signaling
eNodeB
CellAcBar
AcBarTimeForSig
Mean access barring time for signaling
eNodeB
CellAcBar
AC11BarForSig
AC11 barring state for signaling
eNodeB
CellAcBar
AC12BarForSig
eNodeB
CellAcBar
AC13BarForSig
AC13 barring state for signalling
eNodeB
CellAcBar
AC14BarForSig
AC14 barring state for signalling
eNodeB
CellAcBar
AC15BarForSig
eNodeB
CellAccess
LocalCellId
Local cell ID
eNodeB
LST CELLACCESS MOD CELLACCESS
CellAccess
CellBarred
Cell barring state
eNodeB
MOD CELLACCESS LST CELLACCESS
CellAccess
CellReservedExt
Cell reserved for extension
eNodeB
CellAccess
IntraFreqResel
Intra-frequency reselection indication
eNodeB
CellAccess
BroadcastMode
Plmn Broadcast Mode
eNodeB
CellAccess
RoundPeriod
Plmn Round Broadcast Period
eNodeB
CellOp
LocalCellId
Local cell ID
eNodeB
ADD CELLOP DSP CELLBROADCAST CNOPERATOR LST CELLOP MOD CELLOP RMV CELLOP
CellOp
TrackingAreaId
Tracking area ID
eNodeB
ADD CELLOP LST CELLOP MOD CELLOP RMV CELLOP
CellOp
CellReservedForOp
Cell reserved for operator
eNodeB
ADD CELLOP MOD CELLOP LST CELLOP
CellOp
OpUlRbUsedRatio
Operator uplink RB eNodeB used ratio
CellOp
OpDlRbUsedRatio
Operator downlink RB used ratio
eNodeB
CellOp
BroadcastCnOperat Broadcast CN orId operator ID
eNodeB
DSP CELLBROADCAST CNOPERATOR
CellResel
LocalCellId
Local cell ID
eNodeB
LST CELLRESEL MOD CELLRESEL
CellResel
Qhyst
Hysteresis value for eNodeB ranking criteria
MOD CELLRESEL LST CELLRESEL
CellResel
Speed-dependent SpeedDepReselCfg reselection eNodeB Ind parameter configure indicator
CellResel
TEvaluation
The duration for evaluating criteria to eNodeB enter mobility states
CellResel
THystNormal
The additional duration for evaluating criteria to eNodeB enter normal mobility state
CellResel
The number of cell NCellChangeMediu changes to enter m medium mobility state
eNodeB
CellResel
NCellChangeHigh
The number of cell changes to enter high mobility state
eNodeB
CellResel
QHystSfMedium
Additional hysteresis applied in medium mobility state to q-Hyst
eNodeB
CellResel
QHystSfHigh
Additional hysteresis applied in high mobility state to q-Hyst
eNodeB
CellResel
Threshold for EUTRAN interSNonIntraSearchCf frequency and inter- eNodeB gInd RAT measurements configure indicator
CellResel
SNonIntraSearch
Threshold for EUTRAN intereNodeB frequency and interRAT measurements
CellResel
ThrshServLow
Serving frequency lower priority threshold
eNodeB
CellResel
CellReselPriority
Cell reselection priority
eNodeB
CellResel
QRxLevMin
Minimum required RX level
eNodeB
CellResel
PMaxCfgInd
Ue max power allowed configure indicator
eNodeB
CellResel
PMax
Max transmit power eNodeB allowed
CellResel
Threshold for intra frequency SIntraSearchCfgInd measurements configure indicator
eNodeB
CellResel
SIntraSearch
Threshold for intra frequency measurements
eNodeB
CellResel
Measurement MeasBandWidthCfg bandwidth configure eNodeB Ind indicator
CellResel
MeasBandWidth
Measurement bandwidth
eNodeB
CellResel
TReselEutran
Cell reselection timer value for EUTRAN
eNodeB
CellResel
Speed state scale SpeedStateSfCfgIn factor configure d indicator
eNodeB
CellResel
Scaling factor of TReselEutranSfMe TReselEutra in dium medium mobility state
eNodeB
CellResel
Scaling factor of TReselEutranSfHig TReselEutra in high eNodeB h mobility state
CellResel
NeighCellConfig
Neighbor cell config eNodeB
CellResel
PresenceAntennaP Presence antenna ort1 port1
eNodeB
CellResel
SIntraSearchQ
RSRQ Threshold for intra frequency measurements
eNodeB
CellResel
RSRQ Threshold for EUTRAN interSNonIntraSearchQ eNodeB frequency and interRAT measurements
CellResel
Serving frequency ThrshServLowQCfg lower priority RSRQ eNodeB Ind threshold configure indicator
CellResel
ThrshServLowQ
Serving frequency lower priority RSRQ eNodeB threshold
CellResel
QQualMinCfgInd
Minimum intrafrequency reselection required eNodeB quality level configure indicator
CellResel
QQualMin
Minimum intrafrequency eNodeB reselection required quality level
CellReselCdma2000 LocalCellId
Local cell ID
eNodeB
ADD CELLRESELCDMA 2000 LST CELLRESELCDMA 2000 MOD CELLRESELCDMA 2000 RMV CELLRESELCDMA 2000 ADD CELLRESELCDMA 2000 MOD CELLRESELCDMA 2000 LST CELLRESELCDMA 2000
CellReselCdma2000 SysTimeCfgInd
System time information configure indicator
eNodeB
CellReselCdma2000 CdmaEutraSyn
CDMA and EUTRA network eNodeB synchronised indicator
ADD CELLRESELCDMA 2000 MOD CELLRESELCDMA 2000 LST CELLRESELCDMA 2000
CellReselCdma2000
CDMA search SearchWndSizeCfg window size Ind configure indicator
eNodeB
CellReselCdma2000 SearchWndSize
Search window size eNodeB
CellReselCdma2000 HrpdParamCfgInd
HRPD parameters configure indicator
eNodeB
CellReselCdma2000
HRPD cell HrpdCellReselectPa reselection ramCfgInd configure indicator
eNodeB
CellReselCdma2000
HrpdPreRegistAllow HRPD pre-regist ed allowed indicator
eNodeB
CellReselCdma2000
HrpdPreRegistZone HRPD pre-regist Id zone ID
eNodeB
CellReselCdma2000
HRPD second preHrpdSecondPreReg regist zone 0 eNodeB istZoneId0Ind configure indicator
CellReselCdma2000
HrpdSecPreRegistZ HRPD secondary eNodeB oneId0 pre-regist zone ID 0
CellReselCdma2000
HRPD second preHrpdSecondPreReg regist zone 1 eNodeB istZoneId1Ind configure indicator
CellReselCdma2000
HrpdSecPreRegistZ HRPD secondary eNodeB oneId1 pre-regist zone ID 1
CellReselCdma2000 TreselectionHrpd
Cell reselection timer for HRPD
eNodeB
CellReselCdma2000
eNodeB
Scaling factor of TReselCdmaHrpdSf TReselCdmaHrpd CellReselCdma2000 High in high mobility state
eNodeB
Scaling factor of TReselCdmaHrpdSf TReselCdmaHrpd CellReselCdma2000 Medium in medium mobility state
eNodeB
CellReselCdma2000 Cdma1XrttCfgInd
1XRTT parameters eNodeB configure indicator
1XRTT csfbCdma1XrttCsfbReg registration CellReselCdma2000 CfgInd parameters configure indicator
eNodeB
CellReselCdma2000
Cdma1XrttCsfbReg 1XRTT system ID Sid
eNodeB
CellReselCdma2000
Cdma1XrttCsfbReg 1XRTT network ID Nid
eNodeB
CellReselCdma2000
1XRTT multiple Cdma1XrttCsfbReg system ID storage MultiSidInd indicator
eNodeB
CellReselCdma2000
1XRTT multiple Cdma1XrttCsfbReg network ID storage MultiNidInd indicator
eNodeB
CellReselCdma2000
Cdma1XrttCsfbReg 1XRTT home eNodeB HomeRegInd registration indicator
CellReselCdma2000
1XRTT system ID Cdma1XrttCsfbReg roamer registration FrgnSidRegInd indicator
eNodeB
CellReselCdma2000
1XRTT network ID Cdma1XrttCsfbReg roamer registration FrgnNidRegInd indicator
eNodeB
CellReselCdma2000
1XRTT parameter Cdma1XrttCsfbReg change registration eNodeB ParamRegInd indicator
CellReselCdma2000
Cdma1XrttCsfbReg 1XRTT power up eNodeB PowerUpRegInd registration indicator
CellReselCdma2000
Cdma1XrttCsfbReg 1XRTT registration eNodeB RegPeriod period
CellReselCdma2000
Cdma1XrttCsfbReg 1XRTT registration eNodeB RegZone zone
CellReselCdma2000
1XRTT number of Cdma1XrttCsfbReg registration zones to eNodeB TotalZone be retained
CellReselCdma2000
Cdma1XrttCsfbReg 1XRTT zone timer ZoneTimer length
eNodeB
1XRTT state of long Cdma1XrttLongCod code generation CellReselCdma2000 eNodeB eStateCfgInd registers configure indicatorr
CellReselCdma2000
1XRTT state of long Cdma1XrttLongCod code generation eNodeB eState registers
CellReselCdma2000
1XRTT cell Cdma1XrttCellRese reselection lCfgInd configure indicator
eNodeB
CellReselCdma2000
Cdma1XrttTreselect Cell reselection ion timer for 1XRTT
eNodeB
CellReselCdma2000
1XRTT speed state Cdma1XrttSpeedSt scale factors eNodeB ateCfgInd configure indicator
CellReselCdma2000
Cdma1XrttSfMediu 1XRTT medium m speed scale factor
eNodeB
CellReselCdma2000 Cdma1XrttSfHigh
1XRTT high speed scale factor
eNodeB
CellReselCdma2000
1XRTT power-down CsfbRegPwrDownR registration indicator eNodeB egCfgInd configure indicator
CellReselCdma2000 CsfbAcBarCfgInd
1XRTT AC barring information configure indicator
eNodeB
CellReselCdma2000 CsfbAcBar0to9
Persistence value for access overload eNodeB classes 0 to 9
CellReselCdma2000 CsfbAcBar10
Persistence value for access overload eNodeB class 10
CellReselCdma2000 CsfbAcBarMsg
Persistence modifier for access barring factor for eNodeB message transmissions
CellReselCdma2000 CsfbAcBarReg
Persistence modifier for access barring factor for eNodeB autonomous registrations
CellReselCdma2000 CsfbAcBarEmg
Persistence value for emergency calls and emergency message eNodeB transmissions for access overload classes 0 to 9
CellReselGeran
LocalCellId
Local cell ID
eNodeB
ADD CELLRESELGERA N LST CELLRESELGERA N MOD CELLRESELGERA N RMV CELLRESELGERA N
CellReselGeran
TReselGeran
Cell reselection timer value for GERAN
eNodeB
ADD CELLRESELGERA N MOD CELLRESELGERA N LST CELLRESELGERA N
CellReselGeran
eNodeB
CellReselGeran
Scaling factor of TReselGeranSfMed TReselGeran in ium medium mobility state
eNodeB
CellReselGeran
Scaling factor of TReselGeranSfHigh TReselGeran in high mobility state
eNodeB
CellReselUtran
LocalCellId
Local cell ID
eNodeB
ADD CELLRESELUTRA N LST CELLRESELUTRA N MOD CELLRESELUTRA N RMV CELLRESELUTRA N
CellReselUtran
TReselUtran
Cell reselection timer value for UTRAN
eNodeB
ADD CELLRESELUTRA N MOD CELLRESELUTRA N LST CELLRESELUTRA N
CellReselUtran
eNodeB
CellReselUtran
Scaling factor of TReselUtranSfMedi TReselUtran in um medium mobility state
eNodeB
CellReselUtran
Scaling factor of TReselUtranSfHigh TReselUtran in high eNodeB mobility state
CellSel
LocalCellId
Local cell ID
eNodeB
LST CELLSEL MOD CELLSEL
CellSel
QRxLevMin
eNodeB
MOD CELLSEL LST CELLSEL
CellSel
QRxLevMinOffset
Minimum required RX level offset
eNodeB
CellSel
QQualMin
Minimum required RX quality level
eNodeB
CellSel
Minimum required QQualMinOffsetCfg RX quality level Ind offset configure indicator
eNodeB
CellSel
QQualMinOffset
Minimum required RX quality level offset
eNodeB
CellSiMap
LocalCellId
Local cell ID
eNodeB
LST CELLSIMAP MOD CELLSIMAP
CellSiMap
SiMapSwitch
SIB mapping SI algorithm switch
eNodeB
MOD CELLSIMAP LST CELLSIMAP
CellSiMap
Sib2Period
SIB2 period
eNodeB
CellSiMap
Sib3Period
SIB3 period
eNodeB
CellSiMap
Sib4Period
SIB4 period
eNodeB
CellSiMap
Sib5Period
SIB5 period
eNodeB
CellSiMap
Sib6Period
SIB6 period
eNodeB
CellSiMap
Sib7Period
SIB7 period
eNodeB
CellSiMap
Sib8Period
SIB8 period
eNodeB
CellSiMap
Sib10Period
SIB10 period
eNodeB
CellSiMap
Sib11Period
SIB11 period
eNodeB
CellSiMap
EtwsPnDuration
ETWS PN message eNodeB duration time
CellSiMap
EtwsSnOverlapPoli ETWS SN message eNodeB cy overlap policy
CellSiMap
EtwsPnOverlapPoli ETWS PN message eNodeB cy overlap policy
CellUlpcComm
LocalCellId
Local cell ID
eNodeB
LST CELLULPCCOMM MOD CELLULPCCOMM
CellUlpcComm
PassLossCoeff
Path loss coefficient eNodeB
MOD CELLULPCCOMM LST CELLULPCCOMM
CellUlpcComm
P0NominalPUCCH P0 nominal PUCCH eNodeB
CellUlpcComm
P0NominalPUSCH P0 nominal PUSCH eNodeB
CellUlpcComm
DeltaFPUCCHForm DeltaF for PUCCH at1 format 1
eNodeB
CellUlpcComm
DeltaFPUCCHForm DeltaF for PUCCH at1b format 1b
eNodeB
CellUlpcComm
DeltaFPUCCHForm DeltaF for PUCCH at2 format 2
eNodeB
CellUlpcComm
DeltaFPUCCHForm DeltaF for PUCCH at2a format 2a
eNodeB
CellUlpcComm
DeltaFPUCCHForm DeltaF for PUCCH at2b format 2b
eNodeB
CellUlpcComm
DeltaPreambleMsg Delta preamble 3 value for msg3
eNodeB
TimeAlignmentTimer LocalCellId
Local cell ID
eNodeB
LST TATIMER MOD TATIMER
TimeAlignmentTimer
TimeAlignmentTime Uplink time r alignment timer
eNodeB
MOD TATIMER LST TATIMER
UeTimerConst
LocalCellId
Local cell ID
eNodeB
LST UETIMERCONST MOD UETIMERCONST
UeTimerConst
T300
Timer 300
eNodeB
MOD UETIMERCONST LST UETIMERCONST
UeTimerConst
T301
Timer 301
eNodeB
UeTimerConst
T310
Timer 310
eNodeB
UeTimerConst
T311
Timer 311
eNodeB
UeTimerConst
N311
Constant N311
eNodeB
MOD UETIMERCONST LST UETIMERCONST MOD UETIMERCONST LST UETIMERCONST ACT CELL ADD CELL BLK CELL DEA CELL DSP CELL LST CELL MOD CELL RMV CELL STR CELLRFLOOPBAC K STR CELLSELFTEST UBL CELL
UeTimerConst
N310
Constant N310
eNodeB
Cell
LocalCellId
Local cell ID
eNodeB
Cell
CellName
Cell name
eNodeB
ADD CELL MOD CELL LST CELL
Cell
SectorId
Sector No.
eNodeB
Cell
CsgInd
Csg indicator
eNodeB
Cell
UlCyclicPrefix
Uplink cyclic prefix length
eNodeB
Cell
DlCyclicPrefix
Downlink cyclic prefix length
eNodeB
Cell
FreqBand
Frequency band
eNodeB
Cell
UlEarfcnCfgInd
Uplink earfcn indication
eNodeB
Cell
UlEarfcn
Uplink earfcn
eNodeB
Cell
DlEarfcn
Downlink earfcn
eNodeB
Cell
UlBandWidth
Uplink bandwidth
eNodeB
Cell
DlBandWidth
Downlink bandwidth eNodeB
Cell
CellId
Cell ID
eNodeB
Cell
PhyCellId
Physical cell ID
eNodeB
Cell
AdditionalSpectrum Additional spectrum eNodeB Emission emission
Cell
CellActiveState
Cell active state
eNodeB
LST CELL
Cell
CellAdminState
Cell admin state
eNodeB
BLK CELL LST CELL
Cell
CellMidBlkTimer
Cell middle block timer
eNodeB
BLK CELL LST CELL
Cell
FddTddInd
Cell FDD TDD indication
eNodeB
Cell
SubframeAssignme Subframe nt assignment
eNodeB
Cell
SpecialSubframePa Special subframe tterns patterns
eNodeB
Cell
CellSpecificOffset
Cell specific offset
eNodeB
Cell
QoffsetFreq
Intra frequency offset
eNodeB
Cell
RootSequenceIdx
Root sequence index
eNodeB
Cell
HighSpeedFlag
High speed flag
eNodeB
Cell
PreambleFmt
Preamble format
eNodeB
Cell
CellRadius
Cell radius
eNodeB
Cell
Customized CustomizedBandWi bandwidth configure eNodeB dthCfgInd indicator
Cell
CustomizedULBand Customized uplink Width bandwidth
eNodeB
Cell
CustomizedDLBand Customized eNodeB Width downlink bandwidth
Cell
EmergencyAreaIdCf Emergency Area Id eNodeB gInd indicator
Cell
EmergencyAreaId
Emergency Area ID eNodeB
Cell
Ue max power UePowerMaxCfgInd allowed configure indicator
eNodeB
Cell
UePowerMax
Max transmit power eNodeB allowed
Cell
MultiRruCellFlag
Flag of Multi-RRU Cell
eNodeB
Cell
MultiRruCellMode
Mode of Multi-RRU eNodeB Cell
Cell
CPRICompression
CPRI Compression eNodeB
Cell
CellState
Cell instance state
eNodeB
DSP CELL
Cell
CellLatestAvailState
Reason For Latest State Change
eNodeB
DSP CELL
Cell
CellLatestSetupTim Cell latest setup e time
eNodeB
DSP CELL
Cell
CellLatestSetupTyp Cell latest setup e operate type
eNodeB
DSP CELL
Cell
CellLatestRemoveT Cell latest remove ime time
eNodeB
DSP CELL
Cell
CellLatestRemoveT Cell latest remove ype operate type
eNodeB
DSP CELL
Cell
CellPowerSaveStat Cell power save e state
eNodeB
DSP CELL
Cell
BbiSlot
Bbi slot
eNodeB
DSP CELL
Cell
CellTopoType
Cell topo type
eNodeB
DSP CELL
Cell
CabinetNo
Cabinet number
eNodeB
DSP CELL
Cell
SubrackNo
Subrack number
eNodeB
DSP CELL
Cell
SlotNo
Slot number
eNodeB
DSP CELL
Cell
SymbolShutdownSt Symbol shutdown ate state
eNodeB
DSP CELL
Cell
MaxTxPower
Maximum transmit power
eNodeB
DSP CELL
CellBf
LocalCellId
Local cell ID
eNodeB
LST CELLBF MOD CELLBF
CellBf
MaxBfRankPara
Beamforming maximum number of layers
eNodeB
MOD CELLBF LST CELLBF
CellDLIcicMcPara
LocalCellId
Local cell ID
eNodeB
LST CELLDLICICMCPA RA MOD CELLDLICICMCPA RA
CellDLIcicMcPara
ReportInterval
Downlink ICIC measurement report eNodeB interval
MOD CELLDLICICMCPA RA LST CELLDLICICMCPA RA
CellDLIcicMcPara
Downlink ICIC MaxReportCellNum measurement max report cell number
eNodeB
CellDLIcicMcPara
ReportAmount
DownLink ICIC measurement report eNodeB amount
CellDLIcicMcPara
ReportQuantity
DownLink ICIC measurement report eNodeB quantity
CellDLIcicMcPara
TriggerQuantity
DownLink ICIC measurement trigger quantity
eNodeB
CellDLIcicMcPara
Hysteresis
DownLink ICIC measurement hysteresis
eNodeB
CellDLIcicMcPara
TimeToTrigger
DownLink ICIC measurement time to trigger
eNodeB
CellDLIcicMcPara
A3Offset
Downlink ICIC A3 offset
eNodeB
CellLowPower
LocalCellId
Local cell ID
eNodeB
LST CELLLOWPOWER MOD CELLLOWPOWER
CellLowPower
LowPwrSwitch
Low power consumption mode eNodeB switch
MOD CELLLOWPOWER LST CELLLOWPOWER
CellLowPower
LowPwrOrder
Low power consumption mode eNodeB order
CellLowPower
StartTime
Start time
eNodeB
CellLowPower
StopTime
Stop time
eNodeB
CellLowPower
CellUsedPwrReduc Cell used power eTimeLen reduce time length
eNodeB
CellLowPower
Reference signal RsPwrReduceTime power reduce time Len length
eNodeB
CellLowPower
RfShutDownTimeLe RF shutdown time n length
eNodeB
CellLowPower
CellUsedPwrRatio
Cell used power ratio
eNodeB
CellLowPower
RsPwrAdjOffset
Reference signal eNodeB power adjust offset
CellLowPower
EnterTimeLen
Time length for entering the low eNodeB power consumption mode
CellMro
LocalCellId
Local cell ID
eNodeB
LST CELLMRO MOD CELLMRO
CellMro
CioAdjLimitCfgInd
CIO adjustment range configuration eNodeB indicator
MOD CELLMRO LST CELLMRO
CellMro
CioAdjUpperLimit
CIO adjustment upper limit
eNodeB
CellMro
CioAdjLowerLimit
CIO adjustment lower limit
eNodeB
CellRacThd
LocalCellId
Local cell ID
eNodeB
LST CELLRACTHD MOD CELLRACTHD
CellRacThd
GoldServiceArpThd
Gold service arp threshold
eNodeB
MOD CELLRACTHD LST CELLRACTHD
CellRacThd
SilverServiceArpTh Silver service arp d threshold
eNodeB
CellRacThd
Qci1HoThd
QCI1 handover eNodeB admission threshold
CellRacThd
Qci2HoThd
CellRacThd
Qci3HoThd
CellRacThd
Qci4HoThd
CellRacThd
Gold new service NewGoldServiceOff admission threshold eNodeB set offset
CellRacThd
Silver new service NewSilverServiceOf admission threshold eNodeB fset offset
CellRacThd
Bronze new service NewCopperService admission threshold eNodeB Offset offset
CellRacThd
Qci1CongThd
QCI1 congest threshold
eNodeB
CellRacThd
Qci2CongThd
eNodeB
CellRacThd
Qci3CongThd
eNodeB
CellRacThd
Qci4CongThd
eNodeB
CellRacThd
Gold-level GBR GoldGbrCongPropo service congest rtion scheduler proportion
eNodeB
CellRacThd
Silver-level GBR SilverGbrCongProp service congest ortion scheduler proportion
eNodeB
CellRacThd
Bronze-level GBR CopperGbrCongPro service congest portion scheduler proportion
eNodeB
CellRacThd
GBR used resource GbrRbUsedHighTh high proportion eNodeB d threshold
CellRacThd
GBR used resource GbrRbUsedLowThd low proportion eNodeB threshold
CellRacThd
LdcMeaArpThd
ARP threshold
eNodeB
CellRacThd
CongRelOffset
Offset for service congest relieving
eNodeB
CellRacThd
PreemptionArpThd
Preemption ARP threshold
eNodeB
CellRacThd
UlRbHighThd
Uplink RB used eNodeB ratio high threshold
CellRacThd
DlRbHighThd
Downlink RB used eNodeB ratio high threshold
CellRacThd
UlRbLowThd
Uplink RB used ratio low threshold
eNodeB
CellRacThd
DlRbLowThd
Downlink RB used ratio low threshold
eNodeB
CellRacThd
MaxNonGbrBearer Num
Non-GBR max bearer number
eNodeB
CellRfShutdown
LocalCellId
Local cell ID
eNodeB
LST CELLRFSHUTDO WN MOD CELLRFSHUTDO WN
CellRfShutdown
RfShutdownSwitch
RF intelligent shutdown switch
eNodeB
MOD CELLRFSHUTDO WN LST CELLRFSHUTDO WN
CellRfShutdown
StartTime
Start time
eNodeB
CellRfShutdown
StopTime
Stop time
eNodeB
CellRfShutdown
RsPwrAdjOffset
Reference signal eNodeB power adjust offset
CellRicAlgo
LocalCellId
Local cell ID
eNodeB
GET CELLRICDATA LST CELLRICALGO MOD CELLRICALGO SND
CellRicAlgo
RicAlgoSwitch
RIC algorithm switch
eNodeB
MOD CELLRICALGO LST CELLRICALGO
CellRicAlgo
MuteUpPTSSymNu Mute UpPTS m Symbol Number
eNodeB
MOD CELLRICALGO LST CELLRICALGO
CellRicAlgo
MuteULSym
Whether to mute UL eNodeB symbol
MOD CELLRICALGO LST CELLRICALGO LST CELLSHUTDOWN MOD CELLSHUTDOWN
CellShutdown
LocalCellId
Local cell ID
eNodeB
CellShutdown
CellShutdownSwitc Cell intelligent h shutdown switch
eNodeB
MOD CELLSHUTDOWN LST CELLSHUTDOWN
CellShutdown
StartTime
Start time
eNodeB
CellShutdown
StopTime
Stop time
eNodeB
CellShutdown
DlPrbThd
Downlink PRB threshold
eNodeB
CellShutdown
DlPrbOffset
Downlink PRB offset
eNodeB
CellShutdown
UlPrbThd
Uplink PRB threshold
eNodeB
CellShutdown
UlPrbOffset
Uplink PRB offset
eNodeB
CellULIcicMcPara
LocalCellId
Local cell ID
eNodeB
LST CELLULICICMCPA RA MOD CELLULICICMCPA RA
CellULIcicMcPara
ReportInterval
Uplink ICIC measurement report eNodeB interval
MOD CELLULICICMCPA RA LST CELLULICICMCPA RA
CellULIcicMcPara
Uplink ICIC MaxReportCellNum measurement max report cell number
eNodeB
CellULIcicMcPara
ReportAmount
Uplink ICIC measurement report eNodeB amount
CellULIcicMcPara
ReportQuantity
Uplink ICIC measurement report eNodeB quantity
CellULIcicMcPara
TriggerQuantity
Uplink ICIC measurement trigger quantity
eNodeB
CellULIcicMcPara
Hysteresis
Uplink ICIC measurement hysteresis
eNodeB
CellULIcicMcPara
TimeToTrigger
Uplink ICIC measurement time to trigger
eNodeB
CellULIcicMcPara
A3Offset
Uplink ICIC A3 offset
eNodeB
CellUlschAlgo
LocalCellId
Local cell ID
eNodeB
LST CELLULSCHALGO MOD CELLULSCHALGO
CellUlschAlgo
UlschStrategy
Uplink Scheduling Strategy
eNodeB
MOD CELLULSCHALGO LST CELLULSCHALGO
CellUlschAlgo
AdaptHarqSwitch
adaptive HARQ switch
eNodeB
CellUlschAlgo
SinrAdjustTargetIbl SINR target IBLER eNodeB er adjustment
CellUlschAlgo
System Bandwidth PreAllocationBandw Ratio Used By PreeNodeB idthRatio schedule user per TTI
CellUlschAlgo
PreAllocationMinPe minimal period of riod pre-allocation
eNodeB
CellUlschAlgo
PreAllocationSize
data size of preallocation
eNodeB
CellUlschAlgo
UlHoppingType
Uplink hopping type eNodeB
CellUlschAlgo
FreeUserUlRbUsed Free Users Uplink Ratio RB Ratio
eNodeB
CellUlschAlgo
UlSrSchDateLen
UL scheduling request user data length
eNodeB
CellUlschAlgo
SpsRelThd
Semi-persistent resource implicit release threshold
eNodeB
InterRatCellShutdown LocalCellId
Local cell ID
eNodeB
LST INTERRATCELLSH UTDOWN MOD INTERRATCELLSH UTDOWN
ForceShutdownSwit Force shutdown InterRatCellShutdown ch switch
eNodeB
MOD INTERRATCELLSH UTDOWN LST INTERRATCELLSH UTDOWN
InterRatCellShutdown StartTime
Start time
eNodeB
InterRatCellShutdown StopTime
Stop time
eNodeB
InterRatCellShutdown BearNumThd
Bear number threshold
eNodeB
InterRatCellShutdown DlPrbThd
Downlink PRB threshold
eNodeB
InterRatCellShutdown UlPrbThd
Uplink PRB threshold
eNodeB
CellAlgoSwitch
LocalCellId
Local cell ID
eNodeB
LST CELLALGOSWITC H MOD CELLALGOSWITC H
CellAlgoSwitch
RachAlgoSwitch
RACH algorithm switch
eNodeB
MOD CELLALGOSWITC H LST CELLALGOSWITC H
CellAlgoSwitch
SrsAlgoSwitch
SoundingRS algorithm switch
eNodeB
CellAlgoSwitch
PucchAlgoSwitch
PUCCH algorithm switch
eNodeB
CellAlgoSwitch
AqmAlgoSwitch
AQM algorithm switch
eNodeB
CellAlgoSwitch
CqiAdjAlgoSwitch
CQI adjust algorithm switch
eNodeB
CellAlgoSwitch
RlfDetectAlgoSwitc RLF detection h algorithm switch
eNodeB
MOD CELLALGOSWITC H LST CELLALGOSWITC H MOD CELLALGOSWITC H LST CELLALGOSWITC H
CellAlgoSwitch
DynAdjVoltSwitch
Dynamic adjust voltage algorithm switch
eNodeB
CellAlgoSwitch
RacAlgoSwitch
RAC algorithm switch
eNodeB
CellAlgoSwitch
MlbAlgoSwitch
Load balancing algorithm switch
eNodeB
CellAlgoSwitch
DlPcAlgoSwitch
Downlink power control algorithm switch
eNodeB
CellAlgoSwitch
UlPcAlgoSwitch
Uplink power control algorithm switch
eNodeB
CellAlgoSwitch
BfAlgoSwitch
BF algorithm switch eNodeB
CellAlgoSwitch
DlSchSwitch
DL schedule switch eNodeB
CellAlgoSwitch
UlSchSwitch
Uplink schedule switch
eNodeB
CellAlgoSwitch
RanShareModeSwit RAN Sharing Mode eNodeB ch Switch
CellAlgoSwitch
Based on FreqPriorityHoSwitc Frequency Priority h HO Switch
eNodeB
CellAlgoSwitch
MuBfAlgoSwitch
MUBF algorithm switch
eNodeB
CellAlgoSwitch
DistBasedHoSwitch
Distance-based Handover Switch
eNodeB
CellAlgoSwitch
AcBarAlgoSwitch
AcBar algorithms switch
eNodeB
CellAlgoSwitch
UlCompSwitch
UlCoMP algorithms eNodeB switch
CellAlgoSwitch
MrcIrcAdptSwitch
MRC/IRC adaptation switch
eNodeB
CellDlIcic
LocalCellId
Local cell ID
eNodeB
LST CELLDLICIC MOD CELLDLICIC
CellDlIcic
BandMode
Downlink band division scheme
eNodeB
MOD CELLDLICIC LST CELLDLICIC
CellDlpcPdcch
LocalCellId
Local cell ID
eNodeB
LST CELLDLPCPDCCH MOD CELLDLPCPDCCH
CellDlpcPdcch
DediDciPwrOffset
DCI power offset for eNodeB dedicated control
MOD CELLDLPCPDCCH LST CELLDLPCPDCCH
CellDlpcPdsch
LocalCellId
Local cell ID
eNodeB
LST CELLDLPCPDSCH MOD CELLDLPCPDSCH
CellDlpcPdsch
CcuPa
Center UE PA
eNodeB
MOD CELLDLPCPDSCH LST CELLDLPCPDSCH
CellDlpcPdsch
CeuPa
Edge UE PA
eNodeB
MOD CELLDLPCPDSCH LST CELLDLPCPDSCH
CellDlpcPhich
LocalCellId
Local cell ID
eNodeB
LST CELLDLPCPHICH MOD CELLDLPCPHICH
CellDlpcPhich
PwrOffset
Phich Pc Off Power eNodeB Offset
MOD CELLDLPCPHICH LST CELLDLPCPHICH
CellDlschAlgo
LocalCellId
Local cell ID
eNodeB
LST CELLDLSCHALGO MOD CELLDLSCHALGO
CellDlschAlgo
DlschStrategy
Downlink eNodeB scheduling Strategy
MOD CELLDLSCHALGO LST CELLDLSCHALGO
CellDlschAlgo
FreeUserDlRbUsed Free Users Ratio Downlink RB Ratio
eNodeB
CellDlschAlgo
BtServiceWeight
P2P Service Weight eNodeB
CellDlschAlgo
Other Service OtherServiceWeight Weight
eNodeB
CellDlschAlgo
maximum number MaxMimoRankPara of MIMO layers
eNodeB
CellMLB
LocalCellId
Local cell ID
eNodeB
LST CELLMLB MOD CELLMLB
CellMLB
IntraFreqMlbThd
Intra-Frequency Mobility Load Balancing Threshold
eNodeB
MOD CELLMLB LST CELLMLB
CellMLB
InterFreqMlbThd
Inter-Frequency Mobility Load Balancing Threshold
eNodeB
CellMLB
InterRatMlbThd
Inter-RAT Mobility Load Balancing Threshold
eNodeB
CellMLB
LoadExchangePerio Load Information d Exchange Period
eNodeB
CellMLB
LoadOffset
Load Offset
eNodeB
CellMLB
LoadDiffThd
Load Difference Threshold
eNodeB
CellPdcchAlgo
LocalCellId
Local cell ID
eNodeB
LST CELLPDCCHALGO MOD CELLPDCCHALGO MOD CELLPDCCHALGO LST CELLPDCCHALGO
CellPdcchAlgo
SignalCongregateL ComSigCongregLv eNodeB evel
CellPdcchAlgo
Cce Ratio Adjust CceRatioAdjSwitch Switch
eNodeB
MOD CELLPDCCHALGO LST CELLPDCCHALGO
CellPdcchAlgo
InitPdcchSymNum
PDCCH Initial Symbol Number
eNodeB
CellPdcchAlgo
VirtualLoadPro
PDCCH Virtual eNodeB Loading Proportion
CellPdcchAlgo
PDCCH Symbol PdcchSymNumSwit Number Adjust ch Switch
eNodeB
CellPdcchAlgo
CceUseRatio
CCE use ratio
eNodeB
CellPdcchAlgo
PDCCH PdcchAggLvlCLAdj Aggregation Level ustSwitch CL Switch
eNodeB
CellPucchAlgo
LocalCellId
Local cell ID
eNodeB
LST CELLPUCCHALGO MOD CELLPUCCHALGO
CellPucchAlgo
SriLowLoadThd
SRI Low Load Threshold
eNodeB
MOD CELLPUCCHALGO LST CELLPUCCHALGO
CellNoAccessAlmPara LocalCellId
Local cell ID
eNodeB
LST CELLNOACCESSA LMPARA MOD CELLNOACCESSA LMPARA
NoAccessStartDete No access detect CellNoAccessAlmPara ctTime start time
eNodeB
MOD CELLNOACCESSA LMPARA LST CELLNOACCESSA LMPARA
NoAccessStopDete No access detect CellNoAccessAlmPara ctTime stop time
eNodeB
NoAccessDetectTi CellNoAccessAlmPara mer
No access detect timer
eNodeB
CellUlIcic
LocalCellId
Local cell ID
eNodeB
LST CELLULICIC MOD CELLULICIC
CellUlIcic
BandMode
Uplink band division eNodeB scheme
MOD CELLULICIC LST CELLULICIC
CellSimuLoad
LocalCellId
Local cell ID
eNodeB
ADD CELLSIMULOAD DSP CELLSIMULOAD LST CELLSIMULOAD MOD CELLSIMULOAD RMV CELLSIMULOAD
CellSimuLoad
SimLoadCfgIndex
Configure Index
eNodeB
ADD CELLSIMULOAD MOD CELLSIMULOAD LST CELLSIMULOAD
CellSimuLoad
SimuLoadTransMod SimuLoad eNodeB e transmission mode
ADD CELLSIMULOAD MOD CELLSIMULOAD LST CELLSIMULOAD
CellSimuLoad
SimuLoadRbNum
SimuLoad allocated eNodeB RB Number
DSP CELLSIMULOAD
CellSimuLoad
CommercRbNum
Commercial service eNodeB RB number
DSP CELLSIMULOAD
CellSimuLoad
SimuLoadPower
SimuLoad allocated eNodeB power Commercial service eNodeB power
DSP CELLSIMULOAD DSP CELLSIMULOAD
CellSimuLoad
CommercPower
CellSimuLoad
SimuLoadUserNum
SimuLoad allocated eNodeB user Number
DSP CELLSIMULOAD
CellSimuLoad
CommercUserNum
Commercial service eNodeB user number
DSP CELLSIMULOAD
BcchCfg
LocalCellId
Local cell ID
eNodeB
LST BCCHCFG MOD BCCHCFG
BcchCfg
ModifyPeriodCoeff
Modification period eNodeB coefficient
MOD BCCHCFG LST BCCHCFG
CellChPwrCfg
LocalCellId
Local cell ID
eNodeB
LST CELLCHPWRCFG MOD CELLCHPWRCFG
CellChPwrCfg
PcfichPwr
PCFICH power
eNodeB
MOD CELLCHPWRCFG LST CELLCHPWRCFG
CellChPwrCfg
PbchPwr
PBCH power
eNodeB
CellChPwrCfg
SchPwr
SCH power
eNodeB
CellChPwrCfg
DbchPwr
DBCH power
eNodeB
CellChPwrCfg
PchPwr
PCH power
eNodeB
CellChPwrCfg
RaRspPwr
Rach response power
eNodeB
CellChPwrCfg
PrsPwr
Prs power
eNodeB
MOD CELLCHPWRCFG LST CELLCHPWRCFG LST PDSCHCFG MOD PDSCHCFG
PDSCHCfg
LocalCellId
Local cell ID
eNodeB
PDSCHCfg
ReferenceSignalPw Reference signal r power
eNodeB
MOD PDSCHCFG LST PDSCHCFG
PDSCHCfg
Pb
PB
eNodeB
MOD PDSCHCFG LST PDSCHCFG
RACHCfg
LocalCellId
Local cell ID
eNodeB
LST RACHCFG MOD RACHCFG
RACHCfg
PwrRampingStep
Power ramping step eNodeB
MOD RACHCFG LST RACHCFG
RACHCfg
Preamble initial PreambInitRcvTarg received target etPwr power
eNodeB
RACHCfg
MessageSizeGroup Message size of A select group A
eNodeB
RACHCfg
PrachFreqOffset
PRACH Frequency eNodeB Offset
RACHCfg
Indication of PrachConfigIndexCf PRACH eNodeB gInd Configuration Index
RACHCfg
PrachConfigIndex
PRACH eNodeB Configuration Index
SRSCfg
LocalCellId
Local cell ID
eNodeB
DSP SRSCFG LST SRSCFG MOD SRSCFG
SRSCfg
SrsSubframeCfg
SRS subframe configuration
eNodeB
MOD SRSCFG LST SRSCFG
SRSCfg
AnSrsSimuTrans
SRS ACK/NACK simultaneous transmission
eNodeB
SRSCfg
SrsCfgInd
SRS Configuration Indicator
eNodeB
SRSCfg
TddSrsCfgMode
TDD SRS eNodeB Configuration Mode
SRSCfg
CellSrsBandwidthCf Cell srs bandwidth g configuration
eNodeB
DSP SRSCFG
PHICHCfg
LocalCellId
Local cell ID
eNodeB
LST PHICHCFG MOD PHICHCFG
PHICHCfg
PhichDuration
PHICH duration
eNodeB
MOD PHICHCFG LST PHICHCFG
PHICHCfg
PhichResource
PHICH resource
eNodeB
MOD PHICHCFG LST PHICHCFG
PCCHCfg
LocalCellId
Local cell ID
eNodeB
LST PCCHCFG MOD PCCHCFG
PCCHCfg
DefaultPagingCycle Default paging cycle eNodeB
MOD PCCHCFG LST PCCHCFG
PCCHCfg
Nb
NB
eNodeB
MOD PCCHCFG LST PCCHCFG
PUSCHCfg
LocalCellId
Local cell ID
eNodeB
LST PUSCHCFG MOD PUSCHCFG
PUSCHCfg
Nsb
Subband number
eNodeB
MOD PUSCHCFG LST PUSCHCFG
PUSCHCfg
HoppingMode
Hopping mode
eNodeB
PUSCHCfg
HoppingOffset
Hopping offset
eNodeB
PUSCHCfg
GroupHoppingEnab Group hopping led enabled
eNodeB
PUSCHCfg
GroupAssignPUSC Group assignment H PUSCH
eNodeB
PUSCHCfg
SeqHoppingEnable Sequence hopping d enabled
eNodeB
PUSCHCfg
CyclicShift
Cyclic shift
eNodeB
PUSCHCfg
Qam64Enabled
Qam64 enabled
eNodeB
PUCCHCfg
LocalCellId
Local cell ID
eNodeB
LST PUCCHCFG MOD PUCCHCFG
PUCCHCfg
DeltaShift
Delta shift
eNodeB
MOD PUCCHCFG LST PUCCHCFG
PUCCHCfg
NaSriChNum
ACK/SRI Channel Number
eNodeB
PUCCHCfg
CqiRbNum
CQI RB number
eNodeB
Cdma2000ExternalCellPlmn CellGlobalId
Cell global ID
eNodeB
ADD CDMA2000EXTER NALCELLPLMN LST CDMA2000EXTER NALCELLPLMN RMV CDMA2000EXTER NALCELLPLMN
Cdma2000ExternalCellPlmn ShareMcc
Share mobile country code
eNodeB
Cdma2000ExternalCellPlmn ShareMnc
Share mobile network code
eNodeB
Cdma2000HrpdNcell LocalCellId
Local cell ID
eNodeB
ADD CDMA2000HRPDN CELL LST CDMA2000HRPDN CELL MOD CDMA2000HRPDN CELL RMV CDMA2000HRPDN CELL
Cdma2000HrpdNcell CellGlobalId
Cell global ID
eNodeB
ADD CDMA2000HRPDN CELL LST CDMA2000HRPDN CELL MOD CDMA2000HRPDN CELL RMV CDMA2000HRPDN CELL
Cdma2000HrpdNcell NoHoFlag
No handover indicator
eNodeB
ADD CDMA2000HRPDN CELL MOD CDMA2000HRPDN CELL LST CDMA2000HRPDN CELL ADD CDMA2000HRPDN CELL MOD CDMA2000HRPDN CELL LST CDMA2000HRPDN CELL
Cdma2000HrpdNcell NoRmvFlag
No remove indicator eNodeB
Cdma2000HrpdNcell BlindHoPriority
Blind handover priority
eNodeB
ADD CDMA2000HRPDN CELL MOD CDMA2000HRPDN CELL LST CDMA2000HRPDN CELL
Cdma2000HrpdNcell AnrFlag
ANR flag
eNodeB
LST CDMA2000HRPDN CELL
Cdma2000HrpdNcell LocalCellName
Local cell name
eNodeB
Cdma2000HrpdNcell NeighbourCellName
Neighbour cell name
eNodeB
Cdma2000Nfreq
LocalCellId
Local cell ID
eNodeB
ADD CDMA2000NFREQ LST CDMA2000NFREQ MOD CDMA2000NFREQ RMV CDMA2000NFREQ
Cdma2000Nfreq
BandClass
Band class
eNodeB
Cdma2000Nfreq
Frequency
Frequency
eNodeB
Cdma2000Nfreq
OffsetFreq
Frequency offset
eNodeB
ADD CDMA2000NFREQ MOD CDMA2000NFREQ LST CDMA2000NFREQ
Cdma2000Nfreq
SearchWindowSize Search window size eNodeB CfgInd configure indicator
Cdma2000Nfreq
SearchWindowSize Search window size eNodeB
EutranExternalCellPlmn Mcc
ADD EUTRANEXTERNA LCELLPLMN LST EUTRANEXTERNA LCELLPLMN RMV EUTRANEXTERNA LCELLPLMN
EutranExternalCellPlmn Mnc
Mobile network code
eNodeB
EutranExternalCellPlmn eNodeBId
eNodeB ID
eNodeB
EutranExternalCellPlmn CellId
Cell ID
eNodeB
EutranExternalCellPlmn ShareMcc
eNodeB
EutranExternalCellPlmn ShareMnc
eNodeB
GeranExternalCellPlmn GeranCellId
GERAN cell ID
eNodeB
ADD GERANEXTERNAL CELLPLMN LST GERANEXTERNAL CELLPLMN RMV GERANEXTERNAL CELLPLMN
GeranExternalCellPlmn Lac
Location area code eNodeB
GeranExternalCellPlmn Mcc
GeranExternalCellPlmn Mnc
Mobile network code
eNodeB
GeranExternalCellPlmn ShareMcc
eNodeB
GeranExternalCellPlmn ShareMnc
eNodeB
UtranExternalCellPlmn UtranCellId
UTRAN cell ID
eNodeB
ADD UTRANEXTERNAL CELLPLMN LST UTRANEXTERNAL CELLPLMN RMV UTRANEXTERNAL CELLPLMN
UtranExternalCellPlmn Mcc
UtranExternalCellPlmn Mnc
Mobile network code
eNodeB
UtranExternalCellPlmn ShareMcc
eNodeB
UtranExternalCellPlmn ShareMnc
eNodeB
Cdma2000ExternalCell CellGlobalId
Cell global ID
eNodeB
ADD CDMA2000EXTER NALCELL LST CDMA2000EXTER NALCELL MOD CDMA2000EXTER NALCELL RMV CDMA2000EXTER NALCELL
Cdma2000ExternalCell BandClass
Band class
eNodeB
ADD CDMA2000EXTER NALCELL MOD CDMA2000EXTER NALCELL LST CDMA2000EXTER NALCELL ADD CDMA2000EXTER NALCELL MOD CDMA2000EXTER NALCELL LST CDMA2000EXTER NALCELL
Cdma2000ExternalCell Frequency
Frequency
eNodeB
Cdma2000ExternalCell PnOffset
Physical cell ID
eNodeB
ADD CDMA2000EXTER NALCELL MOD CDMA2000EXTER NALCELL LST CDMA2000EXTER NALCELL
Cdma2000ExternalCell Cdma2000Type
CDMA2000 neighbor cell type
eNodeB
Cdma2000ExternalCell Mcc
Cdma2000ExternalCell Mnc
Mobile network code
eNodeB
Cdma2000ExternalCell CellName
Cell name
eNodeB
Cdma20001XRTTNcell LocalCellId
Local cell ID
eNodeB
ADD CDMA20001XRTT NCELL LST CDMA20001XRTT NCELL MOD CDMA20001XRTT NCELL RMV CDMA20001XRTT NCELL
Cdma20001XRTTNcell CellGlobalId
Cell global ID
eNodeB
ADD CDMA20001XRTT NCELL LST CDMA20001XRTT NCELL MOD CDMA20001XRTT NCELL RMV CDMA20001XRTT NCELL
Cdma20001XRTTNcell NoHoFlag
eNodeB
ADD CDMA20001XRTT NCELL MOD CDMA20001XRTT NCELL LST CDMA20001XRTT NCELL ADD CDMA20001XRTT NCELL MOD CDMA20001XRTT NCELL LST CDMA20001XRTT NCELL
Cdma20001XRTTNcell NoRmvFlag
Cdma20001XRTTNcell BlindHoPriority
eNodeB
ADD CDMA20001XRTT NCELL MOD CDMA20001XRTT NCELL LST CDMA20001XRTT NCELL
Cdma20001XRTTNcell AnrFlag
ANR flag
eNodeB
LST CDMA20001XRTT NCELL
Cdma20001XRTTNcell LocalCellName
Local cell name
eNodeB
Cdma20001XRTTNcell NeighbourCellName
Neighbour cell name
eNodeB
Cdma2000BandClass LocalCellId
Local cell ID
eNodeB
ADD CDMA2000BANDC LASS LST CDMA2000BANDC LASS MOD CDMA2000BANDC LASS RMV CDMA2000BANDC LASS ADD CDMA2000BANDC LASS LST CDMA2000BANDC LASS MOD CDMA2000BANDC LASS RMV CDMA2000BANDC LASS
Cdma2000BandClass BandClass
Band class
eNodeB
Cdma2000BandClass CellReselPriority
eNodeB
ADD CDMA2000BANDC LASS MOD CDMA2000BANDC LASS LST CDMA2000BANDC LASS
Cdma2000BandClass ThreshXHigh
High priority threshold
eNodeB
Cdma2000BandClass ThreshXLow
Lower priority threshold
eNodeB
GeranExternalCell
Mcc
ADD GERANEXTERNAL CELL LST GERANEXTERNAL CELL MOD GERANEXTERNAL CELL RMV GERANEXTERNAL CELL
GeranExternalCell
Mnc
Mobile network code
eNodeB
ADD GERANEXTERNAL CELL LST GERANEXTERNAL CELL MOD GERANEXTERNAL CELL RMV GERANEXTERNAL CELL ADD GERANEXTERNAL CELL LST GERANEXTERNAL CELL MOD GERANEXTERNAL CELL RMV GERANEXTERNAL CELL ADD GERANEXTERNAL CELL LST GERANEXTERNAL CELL MOD GERANEXTERNAL CELL RMV GERANEXTERNAL CELL ADD GERANEXTERNAL CELL MOD GERANEXTERNAL CELL LST GERANEXTERNAL CELL
GeranExternalCell
GeranCellId
GERAN cell ID
eNodeB
GeranExternalCell
Lac
GeranExternalCell
RacCfgInd
Routing area code configure indicator
eNodeB
GeranExternalCell
Rac
Routing area code
eNodeB
ADD GERANEXTERNAL CELL MOD GERANEXTERNAL CELL LST GERANEXTERNAL CELL
GeranExternalCell
BandIndicator
Band indicator
eNodeB
GeranExternalCell
GeranArfcn
GERAN ARFCN
eNodeB
GeranExternalCell
NetworkColourCode Network color code eNodeB
GeranExternalCell
BaseStationColour Code
Base station color code
eNodeB
GeranExternalCell
DtmInd
DTM indication
eNodeB
GeranExternalCell
CellName
Cell name
eNodeB
GeranExternalCell
CsPsHOInd
CS and PS eNodeB handover indication
GeranNcell
LocalCellId
Local cell ID
eNodeB
ADD GERANNCELL DSP GERANRIMINFO LST GERANNCELL MOD GERANNCELL RMV GERANNCELL
GeranNcell
Mcc
ADD GERANNCELL LST GERANNCELL MOD GERANNCELL RMV GERANNCELL DSP GERANRIMINFO
GeranNcell
Mnc
Mobile network code
eNodeB
ADD GERANNCELL LST GERANNCELL MOD GERANNCELL RMV GERANNCELL DSP GERANRIMINFO
GeranNcell
Lac
ADD GERANNCELL LST GERANNCELL MOD GERANNCELL RMV GERANNCELL DSP GERANRIMINFO ADD GERANNCELL LST GERANNCELL MOD GERANNCELL RMV GERANNCELL DSP GERANRIMINFO
GeranNcell
GeranCellId
GERAN cell ID
eNodeB
GeranNcell
NoRmvFlag
ADD GERANNCELL MOD GERANNCELL LST GERANNCELL ADD GERANNCELL MOD GERANNCELL LST GERANNCELL
GeranNcell
NoHoFlag
eNodeB
GeranNcell
BlindHoPriority
eNodeB
ADD GERANNCELL MOD GERANNCELL LST GERANNCELL
GeranNcell
AnrFlag
ANR flag
eNodeB
LST GERANNCELL
GeranNcell
LocalCellName
Local cell name
eNodeB
GeranNcell
NeighbourCellName
Neighbour cell name
eNodeB
GeranNcell
eNodeBId
eNodeB ID
eNodeB
DSP GERANRIMINFO
GeranNcell
GRimBeginningTim Rim latest start time eNodeB e
DSP GERANRIMINFO
GeranNcell
GLastRimUpdating Rim latest update Time time
eNodeB
DSP GERANRIMINFO
GeranNfreqGroup
LocalCellId
Local cell ID
eNodeB
ADD GERANNFREQGR OUP LST GERANNFREQGR OUP MOD GERANNFREQGR OUP RMV GERANNFREQGR OUP ADD GERANNFREQGR OUP LST GERANNFREQGR OUP MOD GERANNFREQGR OUP RMV GERANNFREQGR OUP ADD GERANNFREQGR OUP MOD GERANNFREQGR OUP LST GERANNFREQGR OUP
GeranNfreqGroup
BcchGroupId
BCCH group ID
eNodeB
GeranNfreqGroup
GeranVersion
GERAN version
eNodeB
GeranNfreqGroup
StartingArfcn
Starting ARFCN
eNodeB
ADD GERANNFREQGR OUP MOD GERANNFREQGR OUP LST GERANNFREQGR OUP
GeranNfreqGroup
BandIndicator
Band indicator
eNodeB
GeranNfreqGroup
Cell reselection CellReselPriorityCfg priority configure Ind indicator
eNodeB
GeranNfreqGroup
CellReselPriority
eNodeB
GeranNfreqGroup
PmaxGeranCfgInd
PMAX configure indicator
eNodeB
GeranNfreqGroup
PmaxGeran
PMAX
eNodeB
GeranNfreqGroup
QRxLevMin
eNodeB
GeranNfreqGroup
ThreshXHigh
High priority threshold
eNodeB
GeranNfreqGroup
ThreshXLow
Lower priority threshold
eNodeB
GeranNfreqGroup
OffsetFreq
Frequency offset
eNodeB
GeranNfreqGroup
NccPermitted
NCC monitoring permitted
eNodeB
ADD GERANNFREQGR OUP MOD GERANNFREQGR OUP LST GERANNFREQGR OUP ADD GERANNFREQGR OUPARFCN LST GERANNFREQGR OUPARFCN RMV GERANNFREQGR OUPARFCN
GeranNfreqGroupArfcn LocalCellId
Local cell ID
eNodeB
GeranNfreqGroupArfcn BcchGroupId
BCCH group ID
eNodeB
ADD GERANNFREQGR OUPARFCN LST GERANNFREQGR OUPARFCN RMV GERANNFREQGR OUPARFCN ADD GERANNFREQGR OUPARFCN LST GERANNFREQGR OUPARFCN RMV GERANNFREQGR OUPARFCN ADD INTRAFREQBLKC ELL LST INTRAFREQBLKC ELL MOD INTRAFREQBLKC ELL RMV INTRAFREQBLKC ELL ADD INTRAFREQBLKC ELL LST INTRAFREQBLKC ELL MOD INTRAFREQBLKC ELL RMV INTRAFREQBLKC ELL ADD INTRAFREQBLKC ELL MOD INTRAFREQBLKC ELL LST INTRAFREQBLKC ELL
GeranNfreqGroupArfcn GeranArfcn
GERAN ARFCN
eNodeB
IntraFreqBlkCell
LocalCellId
Local cell ID
eNodeB
IntraFreqBlkCell
PhyCellId
Start physical cell ID
eNodeB
IntraFreqBlkCell
CellName
Cell name
eNodeB
IntraFreqBlkCell
PhyCellIdRange
Physical cell ID range
eNodeB
ADD INTRAFREQBLKC ELL MOD INTRAFREQBLKC ELL LST INTRAFREQBLKC ELL ADD EUTRANINTRAFR EQNCELL LST EUTRANINTRAFR EQNCELL MOD EUTRANINTRAFR EQNCELL RMV EUTRANINTRAFR EQNCELL
EutranIntraFreqNCellLocalCellId
Local cell ID
eNodeB
EutranIntraFreqNCellMcc
ADD EUTRANINTRAFR EQNCELL LST EUTRANINTRAFR EQNCELL MOD EUTRANINTRAFR EQNCELL RMV EUTRANINTRAFR EQNCELL
EutranIntraFreqNCellMnc
Mobile network code
eNodeB
EutranIntraFreqNCelleNodeBId
eNodeB ID
eNodeB
EutranIntraFreqNCellCellId
Cell ID
eNodeB
EutranIntraFreqNCellCellIndividualOffset Cell individual offset eNodeB
ADD EUTRANINTRAFR EQNCELL MOD EUTRANINTRAFR EQNCELL LST EUTRANINTRAFR EQNCELL
EutranIntraFreqNCellCellQoffset
Cell offset
eNodeB
EutranIntraFreqNCellNoHoFlag
eNodeB
ADD EUTRANINTRAFR EQNCELL MOD EUTRANINTRAFR EQNCELL LST EUTRANINTRAFR EQNCELL ADD EUTRANINTRAFR EQNCELL MOD EUTRANINTRAFR EQNCELL LST EUTRANINTRAFR EQNCELL LST EUTRANINTRAFR EQNCELL
EutranIntraFreqNCellNoRmvFlag
EutranIntraFreqNCellAnrFlag
ANR flag
eNodeB
EutranIntraFreqNCellLocalCellName
Local cell name
eNodeB
EutranIntraFreqNCellNeighbourCellName
Neighbour cell name
eNodeB
EutranInterNFreq
LocalCellId
Local cell ID
eNodeB
ADD EUTRANINTERNF REQ LST EUTRANINTERNF REQ MOD EUTRANINTERNF REQ RMV EUTRANINTERNF REQ
EutranInterNFreq
DlEarfcn
ADD EUTRANINTERNF REQ LST EUTRANINTERNF REQ MOD EUTRANINTERNF REQ RMV EUTRANINTERNF REQ
EutranInterNFreq
UlEarfcnCfgInd
Uplink EARFCN configure indicator
eNodeB
ADD EUTRANINTERNF REQ MOD EUTRANINTERNF REQ LST EUTRANINTERNF REQ
EutranInterNFreq
UlEarfcn
Uplink EARFCN
eNodeB
EutranInterNFreq
Inter frequency cell CellReselPriorityCfg resel priority eNodeB Ind configure indicator
EutranInterNFreq
CellReselPriority
Inter frequency cell eNodeB resel priority
EutranInterNFreq
EutranReselTime
EUTRAN reselection time
eNodeB
EutranInterNFreq
Speed dependent SpeedDependSPCf resel parameter eNodeB gInd configuring indicator
EutranInterNFreq
Scaling factor of TReselEutranSfMe treseleutra in dium medium mobility state
eNodeB
EutranInterNFreq
Scaling factor of TReselEutranSfHig treseleutra in high h mobility state
eNodeB
EutranInterNFreq
MeasBandWidth
Measurement bandwidth
eNodeB
EutranInterNFreq
QoffsetFreq
Frequency offset
eNodeB
EutranInterNFreq
ThreshXhigh
Inter frequency high eNodeB priority threshold
EutranInterNFreq
ThreshXlow
Inter frequency lower priority threshold
eNodeB
EutranInterNFreq
QRxLevMin
eNodeB
EutranInterNFreq
PmaxCfgInd
PMAX configure indicator
eNodeB
EutranInterNFreq
Pmax
PMAX
eNodeB
EutranInterNFreq
NeighCellConfig
Neighbor cell config eNodeB
EutranInterNFreq
PresenceAntennaP Presence antenna ort1 port1
eNodeB
EutranInterNFreq
InterFreqHoEventTy Inter-Freq HO pe trigger Event Type
eNodeB
EutranInterNFreq
ThreshXhighQ
Inter frequency high priority RSRQ eNodeB threshold
EutranInterNFreq
ThreshXlowQ
Inter frequency low priority RSRQ eNodeB threshold
EutranInterNFreq
QqualMinCfgInd
Minimum RX signal quality configuration eNodeB indicator
EutranInterNFreq
QqualMin
Minimum RX signal eNodeB quality
InterFreqBlkCell
LocalCellId
Local cell ID
eNodeB
ADD INTERFREQBLKC ELL LST INTERFREQBLKC ELL MOD INTERFREQBLKC ELL RMV INTERFREQBLKC ELL
InterFreqBlkCell
DlEarfcn
ADD INTERFREQBLKC ELL LST INTERFREQBLKC ELL MOD INTERFREQBLKC ELL RMV INTERFREQBLKC ELL
InterFreqBlkCell
PhyCellId
Start physical cell ID
eNodeB
ADD INTERFREQBLKC ELL LST INTERFREQBLKC ELL MOD INTERFREQBLKC ELL RMV INTERFREQBLKC ELL ADD INTERFREQBLKC ELL MOD INTERFREQBLKC ELL LST INTERFREQBLKC ELL
InterFreqBlkCell
CellName
Cell name
eNodeB
InterFreqBlkCell
PhyCellIdRange
Physical cell ID range
eNodeB
ADD INTERFREQBLKC ELL MOD INTERFREQBLKC ELL LST INTERFREQBLKC ELL ADD EUTRANINTERFR EQNCELL LST EUTRANINTERFR EQNCELL MOD EUTRANINTERFR EQNCELL RMV EUTRANINTERFR EQNCELL
EutranInterFreqNCellLocalCellId
Local cell ID
eNodeB
EutranInterFreqNCellMcc
ADD EUTRANINTERFR EQNCELL LST EUTRANINTERFR EQNCELL MOD EUTRANINTERFR EQNCELL RMV EUTRANINTERFR EQNCELL
EutranInterFreqNCellMnc
Mobile network code
eNodeB
EutranInterFreqNCelleNodeBId
eNodeB ID
eNodeB
EutranInterFreqNCellCellId
Cell ID
eNodeB
EutranInterFreqNCellCellIndividualOffset Cell individual offset eNodeB
ADD EUTRANINTERFR EQNCELL MOD EUTRANINTERFR EQNCELL LST EUTRANINTERFR EQNCELL
EutranInterFreqNCellCellQoffset
Cell offset
eNodeB
EutranInterFreqNCellNoHoFlag
eNodeB
ADD EUTRANINTERFR EQNCELL MOD EUTRANINTERFR EQNCELL LST EUTRANINTERFR EQNCELL ADD EUTRANINTERFR EQNCELL MOD EUTRANINTERFR EQNCELL LST EUTRANINTERFR EQNCELL
EutranInterFreqNCellNoRmvFlag
EutranInterFreqNCellBlindHoPriority
Blind handover Priority
eNodeB
EutranInterFreqNCellAnrFlag
ANR flag
eNodeB
LST EUTRANINTERFR EQNCELL
EutranInterFreqNCellLocalCellName
Local cell name
eNodeB
EutranInterFreqNCellNeighbourCellName
Neighbour cell name
eNodeB
EutranExternalCell
Mcc
ADD EUTRANEXTERNA LCELL LST EUTRANEXTERNA LCELL MOD EUTRANEXTERNA LCELL RMV EUTRANEXTERNA LCELL
EutranExternalCell
Mnc
Mobile network code
eNodeB
EutranExternalCell
eNodeBId
eNodeB ID
eNodeB
EutranExternalCell
CellId
Cell ID
eNodeB
EutranExternalCell
DlEarfcn
ADD EUTRANEXTERNA LCELL MOD EUTRANEXTERNA LCELL LST EUTRANEXTERNA LCELL
EutranExternalCell
UlEarfcnCfgInd
Uplink EARFCN indicator
eNodeB
EutranExternalCell
UlEarfcn
Uplink EARFCN
eNodeB
EutranExternalCell
PhyCellId
Physical cell ID
eNodeB
EutranExternalCell
Tac
Tracking area code eNodeB
EutranExternalCell
CellName
Cell name
eNodeB
GeranRanShare
LocalCellId
Local cell ID
eNodeB
ADD GERANRANSHAR E LST GERANRANSHAR E MOD GERANRANSHAR E RMV GERANRANSHAR E ADD GERANRANSHAR E LST GERANRANSHAR E MOD GERANRANSHAR E RMV GERANRANSHAR E
GeranRanShare
BcchGroupId
BCCH group ID
eNodeB
GeranRanShare
Mcc
ADD GERANRANSHAR E LST GERANRANSHAR E MOD GERANRANSHAR E RMV GERANRANSHAR E
GeranRanShare
Mnc
Mobile network code
eNodeB
ADD GERANRANSHAR E LST GERANRANSHAR E MOD GERANRANSHAR E RMV GERANRANSHAR E
GeranRanShare
eNodeB
ADD GERANRANSHAR E MOD GERANRANSHAR E LST GERANRANSHAR E
GeranRanShare
CellReselPriority
eNodeB
ADD GERANRANSHAR E MOD GERANRANSHAR E LST GERANRANSHAR E
UtranNCell
LocalCellId
Local cell ID
eNodeB
ADD UTRANNCELL DSP UTRANRIMINFO LST UTRANNCELL MOD UTRANNCELL RMV
UtranNCell
Mcc
ADD UTRANNCELL LST UTRANNCELL MOD UTRANNCELL RMV UTRANNCELL DSP UTRANRIMINFO
UtranNCell
Mnc
Mobile network code
eNodeB
UtranNCell
UtranCellId
UTRAN cell ID
eNodeB
UtranNCell
NoHoFlag
eNodeB
ADD UTRANNCELL MOD UTRANNCELL LST UTRANNCELL
UtranNCell
NoRmvFlag
UtranNCell
BlindHoPriority
eNodeB
UtranNCell
AnrFlag
ANR flag
eNodeB
LST UTRANNCELL
UtranNCell
LocalCellName
Local cell name
eNodeB
UtranNCell
NeighbourCellName
Neighbour cell name
eNodeB
UtranNCell
eNodeBId
eNodeB ID
eNodeB
DSP UTRANRIMINFO
UtranNCell
RncId
RNC ID
eNodeB
DSP UTRANRIMINFO
UtranNCell
URimBeginningTim Rim latest start time eNodeB e
DSP UTRANRIMINFO
UtranNCell
ULastRimUpdatingT RIM latest update ime time
eNodeB
DSP UTRANRIMINFO ADD UTRANRANSHAR E LST UTRANRANSHAR E MOD UTRANRANSHAR E
UtranRanShare
LocalCellId
Local cell ID
eNodeB
UtranRanShare
UtranDlArfcn
Downlink UARFCN eNodeB
ADD UTRANRANSHAR E LST UTRANRANSHAR E MOD UTRANRANSHAR E RMV UTRANRANSHAR E
UtranRanShare
Mcc
UtranRanShare
Mnc
Mobile network code
eNodeB
UtranRanShare
eNodeB
ADD UTRANRANSHAR E MOD UTRANRANSHAR E LST UTRANRANSHAR
UtranRanShare
CellReselPriority
eNodeB
ADD UTRANRANSHAR E MOD UTRANRANSHAR E LST UTRANRANSHAR E
UtranNFreq
LocalCellId
Local cell ID
eNodeB
ADD UTRANNFREQ LST UTRANNFREQ MOD UTRANNFREQ RMV UTRANNFREQ
UtranNFreq
UtranDlArfcn
ADD UTRANNFREQ LST UTRANNFREQ MOD UTRANNFREQ RMV UTRANNFREQ
UtranNFreq
UtranVersion
UTRAN version
eNodeB
ADD UTRANNFREQ MOD UTRANNFREQ LST UTRANNFREQ ADD UTRANNFREQ MOD UTRANNFREQ LST UTRANNFREQ
UtranNFreq
UtranFddTddType
UTRAN cell type indicator
eNodeB
UtranNFreq
UtranUlArfcnCfgInd
Uplink UARFCN indicator
eNodeB
ADD UTRANNFREQ MOD UTRANNFREQ LST UTRANNFREQ
UtranNFreq
UtranUlArfcn
Uplink UARFCN
eNodeB
UtranNFreq
CellReselPriorityCfg Reselection priority eNodeB Ind configure indicator
UtranNFreq
CellReselPriority
eNodeB
UtranNFreq
PmaxUtran
PMAX
eNodeB
UtranNFreq
OffsetFreq
Frequency offset
eNodeB
UtranNFreq
Qqualmin
Minimum required quality level
eNodeB
UtranNFreq
QRxLevMin
eNodeB
UtranNFreq
ThreshXHigh
UTRAN high priority eNodeB threshold
UtranNFreq
ThreshXLow
UTRAN lower priority threshold
eNodeB
UtranNFreq
ThreshXHighQ
UTRAN high priority eNodeB RSRQ threshold
UtranNFreq
ThreshXLowQ
UTRAN low priority eNodeB RSRQ threshold
UtranNFreq
PsPriority
PS service priority
eNodeB
UtranNFreq
CsPriority
CS service priority
eNodeB
UtranExternalCell
Mcc
ADD UTRANEXTERNAL CELL LST UTRANEXTERNAL CELL MOD UTRANEXTERNAL CELL RMV UTRANEXTERNAL CELL
UtranExternalCell
Mnc
Mobile network code
eNodeB
UtranExternalCell
UtranCellId
UTRAN cell ID
eNodeB
UtranExternalCell
UtranFddTddType
UTRAN cell type indicator
eNodeB
ADD UTRANEXTERNAL CELL MOD UTRANEXTERNAL CELL LST UTRANEXTERNAL CELL
UtranExternalCell
UtranDlArfcn
UtranExternalCell
UtranUlArfcnCfgInd
Uplink UARFCN configure indicator
eNodeB
UtranExternalCell
UtranUlArfcn
Uplink UARFCN
eNodeB
UtranExternalCell
RncId
RNC ID
eNodeB
ADD UTRANEXTERNAL CELL MOD UTRANEXTERNAL CELL LST UTRANEXTERNAL CELL ADD UTRANEXTERNAL CELL MOD UTRANEXTERNAL CELL LST UTRANEXTERNAL CELL
UtranExternalCell
RacCfgInd
Routing area code configure indicator
eNodeB
UtranExternalCell
Rac
Routing area code
eNodeB
ADD UTRANEXTERNAL CELL MOD UTRANEXTERNAL CELL LST UTRANEXTERNAL CELL ADD UTRANEXTERNAL CELL MOD UTRANEXTERNAL CELL LST UTRANEXTERNAL CELL
UtranExternalCell
PScrambCode
Primary scrambling eNodeB code
UtranExternalCell
Lac
UtranExternalCell
CellName
Cell name
eNodeB
UtranExternalCell
CsPsHOInd
CS and PS handover indicator
eNodeB
ANR
AddCellThd
ANR add cell threshold
eNodeB
MOD ANR LST ANR
ANR
DelCellThd
ANR delete cell threshold
eNodeB
MOD ANR LST ANR
ANR
NcellHoStatNum
Least Handover Num for Statistic
eNodeB
MOD ANR LST ANR
ANR
StatisticPeriod
Statistic cycle
eNodeB
MOD ANR LST ANR
ANR
FastAnrRprtAmount
Fast ANR PCI report amount
eNodeB
MOD ANR LST ANR
ANR
FastAnrRprtInterval
Fast ANR PCI report interval
eNodeB
MOD ANR LST ANR
ANR
FastAnrCheckPerio Fast ANR checking eNodeB d period
MOD ANR LST ANR
ANR
FastAnrRsrpThd
Fast ANR measurement RSRP threshold
eNodeB
MOD ANR LST ANR
ANR
IntraRat Fast ANR FastAnrIntraRatMea measurement UE sUeNum number
eNodeB
MOD ANR LST ANR
ANR
InterRat Fast ANR FastAnrInterRatMea measurement UE sUeNum number
eNodeB
MOD ANR LST ANR
ANR
FastAnrIntraRatUe NumThd
IntraRat Fast ANR valid measurement eNodeB min UE number
MOD ANR LST ANR
ANR
FastAnrInterRatUe NumThd
InterRat Fast ANR valid measurement eNodeB min UE number
MOD ANR LST ANR
ANR
OptMode
Optimization Mode
eNodeB
MOD ANR LST ANR
ANR
StatisticPeriodForN Statistic Cycle For RTDel Delete NRT
eNodeB
MOD ANR LST ANR
ANR
StatisticNumForNR Statistic Number TDel For Delete NRT
eNodeB
MOD ANR LST ANR
ANR
ANR Active PCI ActivePciConflictSw Conflict Detection itch Switch
eNodeB
MOD ANR LST ANR
ANR
StartTime
Start time
eNodeB
MOD ANR LST ANR
ANR
StopTime
Stop time
eNodeB
MOD ANR LST ANR
ANR
FastAnrRscpThd
UTRAN Fast ANR RSCP threshold
eNodeB
MOD ANR LST ANR
ANR
FastAnrRssiThd
GERAN Fast ANR RSSI threshold
eNodeB
MOD ANR LST ANR
ANR
CDMA2000 1XRTT FastAnrCdma1xrttPi Fast ANR Pilot eNodeB lotThd threshold
MOD ANR LST ANR
ANR
CDMA2000 HRPD FastAnrCdmahrpdP Fast ANR Pilot ilotThd threshold
eNodeB
MOD ANR LST ANR
CellIdPrdUpt
PrdUptSwitch
Period update switch
eNodeB
MOD CELLIDPRDUPT LST CELLIDPRDUPT
CellIdPrdUpt
ActionTime
Action time
eNodeB
CellIdPrdUpt
Period
Period
eNodeB
ENodeBAlgoSwitch HoAlgoSwitch
Handover Algo switch
eNodeB
MOD ENODEBALGOSWI TCH LST ENODEBALGOSWI TCH
ENodeBAlgoSwitch HoModeSwitch
Handover Mode switch
eNodeB
ENodeBAlgoSwitch DlIcicSwitch
DlIcic algorithm switch
eNodeB
ENodeBAlgoSwitch AnrSwitch
ANR algorithm switch
eNodeB
ENodeBAlgoSwitch RedirectSwitch
Redirection switch
eNodeB
ENodeBAlgoSwitch MroSwitch
MRO algorithm switch
eNodeB
ENodeBAlgoSwitch TpeSwitch
TPE switch
eNodeB
ENodeBAlgoSwitch UlIcicTimeSwitch
UlIcic time switch
eNodeB
ENodeBAlgoSwitch UlIcicFreqSwitch
UlIcic freq switch
eNodeB
ENodeBAlgoSwitch LcsSwitch
LCS switch
eNodeB
ENodeBAlgoSwitch TrmSwitch
TRM switch
eNodeB
ENodeBAlgoSwitch
PciConflictAlmSwitc PCI conflict alarm h switch
eNodeB
ENodeBAlgoSwitch PowerSaveSwitch
Power save switch
eNodeB
ENodeBAlgoSwitch RimSwitch
RIM switch
eNodeB
ENodeBAlgoSwitch
ANR Under RAN RanSharingAnrSwit Sharing Algorithm ch Switch
eNodeB
ENodeBAlgoSwitch FreqLayerSwtich
Frequency Layer Switch
eNodeB
LICENSEALMTHD OPRD
OPRD
eNodeB
SET LICENSEALMTHD LST LICENSEALMTHD
LICENSEALMTHD OTHD
OTHD
eNodeB
LICENSEALMTHD RPRD
RPRD
eNodeB
LICENSEALMTHD RTHD
RTHD
eNodeB
LicRatio
UpLicRatio
Uplink Traffic License Ratio
eNodeB
MOD LICRATIO LST LICRATIO
LicRatio
TrafficSharingType
Traffic Sharing Type
eNodeB
LicRatio
Operator1TrfRatio
Operator 1 Traffic Ratio
eNodeB
LicRatio
Operator2TrfRatio
eNodeB
LicRatio
Operator3TrfRatio
eNodeB
LicRatio
Operator4TrfRatio
eNodeB
LicRatio
Operator1TrfSharin Operator 1 Traffic gRatio Sharing Ratio
eNodeB
LicRatio
eNodeB
LicRatio
eNodeB
LicRatio
eNodeB
MRO
OptPeriod
MRO optimization period
eNodeB
MOD MRO LST MRO
MRO
NcellOptThd
Ncell optimization threshold
eNodeB
MOD MRO LST MRO
MRO
StatNumThd
MRO statistics number threshold
eNodeB
MOD MRO LST MRO
MRO
PingpongTimeThd
Pingpong handover eNodeB threshold
MOD MRO LST MRO
MRO
PingpongRatioThd
Pingpong ratio threshold
eNodeB
MOD MRO LST MRO
MRO
CoverAbnormalThd
Abnormal coverage eNodeB threshold
MOD MRO LST MRO
MRO
ServingRsrpThd
Serving cell RSRP threshold
eNodeB
MOD MRO LST MRO
MRO
NeighborRsrpThd
Neighbour cell RSRP threshold
eNodeB
MOD MRO LST MRO
SimuLoad
SimuLoadCfgIndex configuration index eNodeB
LST SIMULOAD MOD SIMULOAD
SimuLoad
SimuLoadRbThd
RB usage threshold eNodeB
MOD SIMULOAD LST SIMULOAD
SimuLoad
SimuLoadPwrThd
Power usage threshold
eNodeB
SimuLoad
SimuLoadReportPe Report period riod
eNodeB
SimuLoad
SimuLoadStatPerio Statistic period d
eNodeB
SimuLoad
FreqSelSwitch
Frequency selective eNodeB switch
TcpAckCtrlAlgo
AckCtrlSwitch
TCP ACK Control Switch
eNodeB
MOD TCPACKCTRLALG O LST TCPACKCTRLALG O
TcpAckCtrlAlgo
DlMaxThroughput
DL Max Throughput eNodeB
TcpAckCtrlAlgo
CtrlTimerLength
Control Timer Length
eNodeB
TddFrameOffset
TimeOffset
TDD time offset
eNodeB
MOD TDDFRAMEOFFSE T LST TDDFRAMEOFFSE T
TpeAlgo
PortListNum
TCP Port Number
eNodeB
MOD TPEALGO LST TPEALGO
TpeAlgo
Port1
TCP Port 1
eNodeB
TpeAlgo
Port2
TCP Port 2
eNodeB
TpeAlgo
Port3
TCP Port 3
eNodeB
TpeAlgo
Port4
TCP Port 4
eNodeB
TpeAlgo
Port5
TCP Port 5
eNodeB
TpeAlgo
Port6
TCP Port 6
eNodeB
TpeAlgo
Port7
TCP Port 7
eNodeB
TpeAlgo
Port8
TCP Port 8
eNodeB
TpeAlgo
Port9
TCP Port 9
eNodeB
TpeAlgo
Port10
TCP Port 10
eNodeB
TpeAlgo
Port11
TCP Port 11
eNodeB
TpeAlgo
Port12
TCP Port 12
eNodeB
TpeAlgo
Port13
TCP Port 13
eNodeB
TpeAlgo
Port14
TCP Port 14
eNodeB
TpeAlgo
Port15
TCP Port 15
eNodeB
TpeAlgo
Port16
TCP Port 16
eNodeB
TpeAlgo
Port17
TCP Port 17
eNodeB
TpeAlgo
Port18
TCP Port 18
eNodeB
TpeAlgo
Port19
TCP Port 19
eNodeB
TpeAlgo
Port20
TCP Port 20
eNodeB
MOD TPEALGO LST TPEALGO ADD NODETORSCGRP LST NODETORSCGRP MOD NODETORSCGRP RMV NODETORSCGRP ADD NODETORSCGRP MOD NODETORSCGRP LST NODETORSCGRP
NODETORSCGRP
OBJTORSCGROU Mapping ID PID
eNodeB
NODETORSCGRP S1X2FLAG
S1/X2 Identifier
eNodeB
NODETORSCGRP ISALLMATCH
IsAllMatch
eNodeB
ADD NODETORSCGRP MOD NODETORSCGRP LST NODETORSCGRP
NODETORSCGRP ENDPOINTID
Node Identifier
eNodeB
NODETORSCGRP CABINETNO
CabinetNo
eNodeB
ADD NODETORSCGRP MOD NODETORSCGRP LST NODETORSCGRP ADD NODETORSCGRP MOD NODETORSCGRP LST NODETORSCGRP ADD NODETORSCGRP MOD NODETORSCGRP LST NODETORSCGRP ADD NODETORSCGRP MOD NODETORSCGRP LST NODETORSCGRP ADD NODETORSCGRP MOD NODETORSCGRP LST NODETORSCGRP
NODETORSCGRP SUBRACKNO
SubrackNo
eNodeB
NODETORSCGRP SLOTNO
SlotNo
eNodeB
NODETORSCGRP RSCGRPT
Transmission Resource Group Bear Type
eNodeB
NODETORSCGRP RSCGRPN
Transmission eNodeB Resource Group ID
NODETORSCGRP SBT
Subboard Type
eNodeB
NODETORSCGRP PN
Bearing Port No.
eNodeB
ADD NODETORSCGRP MOD NODETORSCGRP LST NODETORSCGRP ADD NODETORSCGRP MOD NODETORSCGRP LST NODETORSCGRP ADD SONSECPARA LST SONSECPARA MOD SONSECPARA RMV SONSECPARA ADD SONSECPARA MOD SONSECPARA LST SONSECPARA ADD SONSECPARA MOD SONSECPARA LST SONSECPARA ADD SONSECPARA MOD SONSECPARA LST SONSECPARA
NODETORSCGRP PT
Bearing Port Type
eNodeB
SonSecPara
SONSECPARANA ME
Son IPsec Parameter Name
eNodeB
SonSecPara
PROPID
IKE Proposal ID
eNodeB
SonSecPara
PROPNAME
IPsec Proposal Name
eNodeB
SonSecPara
APPTYPE
Application Type
eNodeB
SonSecPara
IKEVERSION
IKE Version
eNodeB
ADD SONSECPARA MOD SONSECPARA LST SONSECPARA
SonSecPara
EXCHMODE
Exchange Mode
eNodeB
SonSecPara
PKEY
Pre-shared Key
eNodeB
ADD SONSECPARA MOD SONSECPARA LST SONSECPARA ADD SONSECPARA MOD SONSECPARA LST SONSECPARA
SonSecPara
DPD
DPD Mode
eNodeB
SonSecPara
DPDIDLETIME
DPD Idle Time
eNodeB
SonSecPara
DPDRETRI
DPD Retransmission Interval
eNodeB
SonSecPara
DPDRETRN
DPD Retransmission Count
eNodeB
SonSecPara
PFS
Perfect Forward Secrecy
eNodeB
SonSecPara
LTCFG
SA Duration Mode
eNodeB
SonSecPara
LTS
Lifetime Based On Time
eNodeB
SonSecPara
LTKB
Lifetime Based On Traffic
eNodeB
ADD SONSECPARA MOD SONSECPARA LST SONSECPARA ADD SONSECPARA MOD SONSECPARA LST SONSECPARA ADD MME6 DSP MME6 LST MME6 MOD MME6 RMV MME6
SonSecPara
CNOPERATORID
CN Operator ID
eNodeB
MME6
MMEID
MME6 ID
eNodeB
MME6
SIGIP1
First Signaling IPv6 eNodeB Address
ADD MME6 MOD MME6 LST MME6
MME6
SIGIP1SECFLAG
First Signaling IP IPsec Flag
eNodeB
MME6
IKEPEERNM1
First IPv6 IKEPeer Name
eNodeB
MME6
IPSECPROPNM1
First IPsec Proposal eNodeB Name
MME6
SIGIP2
Second Signaling IPv6 Address
eNodeB
MME6
SIGIP2SECFLAG
Second Signaling IP eNodeB IPsec Flag
MME6
IKEPEERNM2
Second IPv6 IKEPeer Name
eNodeB
MME6
IPSECPROPNM2
Second IPsec Proposal Name
eNodeB
MME6
LOCPORT
App Port No.
eNodeB
MME6
DESCRIPTION
Description of IPv6 eNodeB MME
MME6
CNOPERATORID
CN Operator ID
eNodeB
MME6
MMERELEASE
MME Release
eNodeB
MME
MMEID
MME ID
eNodeB
ADD MME DSP MME LST MME MOD MME RMV MME
MME
FIRSTSIGIP
First Signalling IP
eNodeB
ADD MME MOD MME LST MME
MME
FIRSTIPSECFLAG First IPSec Flag
eNodeB
MME
FIRSTIKEPEERNM First IKEPeer Name eNodeB
MME
FIRSTIPSECPROP First IPsec Proposal eNodeB NM Name
MME
SECSIGIP
Second Signalling IP
eNodeB
MME
SECIPSECFLAG
Second IPSec Flag eNodeB
MME
SECIKEPEERNM
Second IKEPeer Name
eNodeB
MME
SECIPSECPROPN Second IPsec M Proposal Name
eNodeB
MME
LOCPORT
App Port No.
eNodeB
MME
DESCRIPTION
Description of MME eNodeB
MME
CNOPERATORID
CN Operator ID
eNodeB
MME
MMERELEASE
MME Release
eNodeB
S1ServIP
CN
Cabinet No.
eNodeB
ADD S1SERVIP MOD S1SERVIP DSP X2ENODEB LST S1SERVIP
S1ServIP
SRN
Subrack No.
eNodeB
ADD S1SERVIP MOD S1SERVIP LST S1SERVIP
S1ServIP
SN
Slot No.
eNodeB
S1ServIP
S1SERVIPID
S1 Service IP ID
eNodeB
ADD S1SERVIP LST S1SERVIP MOD S1SERVIP RMV S1SERVIP
S1ServIP
S1SERVIP
S1 Service IP
eNodeB
S1ServIP
IPSECFLAG
IPSec Flag
eNodeB
S1ServIP
IKEIP
Local IKE IP
eNodeB
S1ServIP
PATHCHK
Path Check
eNodeB
S1ServIP
CNOPERATORID
CN Operator ID
eNodeB
S1ServIP6
S1ServIP6ID
S1ServIP6 ID
eNodeB
ADD S1SERVIP6 LST S1SERVIP6 MOD S1SERVIP6 RMV S1SERVIP6
S1ServIP6
CN
Cabinet No.
eNodeB
ADD S1SERVIP6 MOD S1SERVIP6 LST S1SERVIP6
S1ServIP6
SRN
Subrack No.
eNodeB
S1ServIP6
SN
Slot No.
eNodeB
S1ServIP6
SERVIP
Local Service IPv6 Address
eNodeB
S1ServIP6
SERVIPSECFLAG
Service IP IPsec Flag
eNodeB
S1ServIP6
SERVIKEIP
Service IPv6 IKE IP eNodeB
S1ServIP6
PATHCHK
Path Check
eNodeB
S1ServIP6
CNOPERATORID
CN Operator ID
eNodeB
S1SigIP
CN
Cabinet No.
eNodeB
ADD S1SIGIP MOD S1SIGIP LST S1SIGIP
S1SigIP
SRN
Subrack No.
eNodeB
S1SigIP
SN
Slot No.
eNodeB
S1SigIP
S1SIGIPID
S1 Signal IP ID
eNodeB
ADD S1SIGIP LST S1SIGIP MOD S1SIGIP RMV S1SIGIP
S1SigIP
LOCIP
Local IP
eNodeB
S1SigIP
LOCIPSECFLAG
Local IPSec Flag
eNodeB
S1SigIP
LOCIKEIP
Local IKE IP
eNodeB
S1SigIP
SECLOCIP
Second Local IP
eNodeB
S1SigIP
SECLOCIPSECFLA Second Local IPSec eNodeB G Flag
S1SigIP
SECLOCIKEIP
Second Local IKE IP
eNodeB
S1SigIP
LOCPORT
Local Port No.
eNodeB
S1SigIP
RTOMIN
RTO Min Value
eNodeB
S1SigIP
RTOMAX
RTO Max Value
eNodeB
S1SigIP
RTOINIT
RTO Initial Value
eNodeB
S1SigIP
RTOALPHA
RTO Alpha Value
eNodeB
S1SigIP
RTOBETA
RTO Beta Value
eNodeB
S1SigIP
HBINTER
Heart-beat Interval
eNodeB
S1SigIP
MAXASSOCRETR
Max Association Retransmission
eNodeB
S1SigIP
MAXPATHRETR
Max Path Retransmission
eNodeB
S1SigIP
CHKSUMTX
Transmit Message Checksum Flag
eNodeB
S1SigIP
CHKSUMRX
Receive Message Checksum Flag
eNodeB
S1SigIP
CHKSUMTYPE
Checksum Arithmetic Type
eNodeB
S1SigIP
SWITCHBACKFLA Switch Back Flag G
eNodeB
S1SigIP
SWITCHBACKHBN Heart-beat Times UM When Switch Back
eNodeB
S1SigIP
TSACK
SACK Timeout
eNodeB
S1SigIP
CNOPERATORID
CN Operator ID
eNodeB
S1SigIP6
S1SIGIP6ID
S1SigIP6 ID
eNodeB
ADD S1SIGIP6 LST S1SIGIP6 MOD S1SIGIP6 RMV S1SIGIP6
S1SigIP6
CN
Cabinet No.
eNodeB
ADD S1SIGIP6 MOD S1SIGIP6 LST S1SIGIP6
S1SigIP6
SRN
Subrack No.
eNodeB
S1SigIP6
SN
Slot No.
eNodeB
S1SigIP6
SIGIP1
First Local Signaling eNodeB IPv6 Address
S1SigIP6
SIGIP1SECFLAG
eNodeB
S1SigIP6
SIGIKEIP
First Sigaling IPv6 IKE IP
eNodeB
S1SigIP6
SIGIP2
Second Local Signaling IPv6 Address
eNodeB
S1SigIP6
SIGIP2SECFLAG
S1SigIP6
SIGIKEIP2
Second Signaling IPv6 IKE IP
eNodeB
S1SigIP6
LOCPORT
Local Port No.
eNodeB
S1SigIP6
RTOMIN
RTO Min Value
eNodeB
S1SigIP6
RTOMAX
RTO Max Value
eNodeB
S1SigIP6
RTOINIT
RTO Initial Value
eNodeB
S1SigIP6
RTOALPHA
RTO Alpha Value
eNodeB
S1SigIP6
RTOBETA
RTO Beta Value
eNodeB
S1SigIP6
HBINTER
Heart-beat Interval
eNodeB
S1SigIP6
MAXASSOCRETR
eNodeB
S1SigIP6
MAXPATHRETR
eNodeB
S1SigIP6
CHKSUMTX
eNodeB
S1SigIP6
CHKSUMRX
eNodeB
ADD S1SIGIP6 MOD S1SIGIP6 LST S1SIGIP6 ADD S1SIGIP6 MOD S1SIGIP6 LST S1SIGIP6
S1SigIP6
CHKSUMTYPE
eNodeB
S1SigIP6
eNodeB
S1SigIP6
eNodeB
S1SigIP6
CNOPERATORID
CN Operator ID
eNodeB
SGW
SGWID
Service Gateway ID eNodeB
ADD SGW DSP SGW LST SGW MOD SGW RMV SGW
SGW
SERVIP1
First Service IP
eNodeB
ADD SGW MOD SGW LST SGW
SGW
SERVIP1IPSECFL First Service IP AG IPSec Flag
eNodeB
SGW
SERVIP1IKEPEER First Service IP NM IKEPeer Name
eNodeB
SGW
First Service IP SERVIP1IPSECPR IPsec Proposal OPNM Name
eNodeB
SGW
SERVIP2
Second Service IP
eNodeB
SGW
SERVIP2IPSECFL Second Service IP AG IPSec Flag
eNodeB
SGW
SERVIP2IKEPEER Second Service IP NM IKEPeer Name
eNodeB
SGW
Second Service IP SERVIP2IPSECPR IPsec Proposal OPNM Name
eNodeB
SGW
SERVIP3
Third Service IP
eNodeB
SGW
SERVIP3IPSECFL Third Service IP AG IPSec Flag
eNodeB
SGW
SERVIP3IKEPEER Third Service IP NM IKEPeer Name
eNodeB
SGW
Third Service IP SERVIP3IPSECPR IPsec Proposal OPNM Name
eNodeB
SGW
SERVIP4
Fourth Service IP
eNodeB
SGW
SERVIP4IPSECFL Fourth Service IP AG IPSec Flag
eNodeB
SGW
SERVIP4IKEPEER Fourth Service IP NM IKEPeer Name
eNodeB
SGW
Fourth Service IP SERVIP4IPSECPR IPsec Proposal OPNM Name
eNodeB
SGW
DESCRIPTION
Description of SGW eNodeB
SGW
CNOPERATORID
CN Operator ID
eNodeB
SGW6
SGWID
SGW6 ID
eNodeB
ADD SGW6 DSP SGW6 LST SGW6 MOD SGW6 RMV SGW6
SGW6
SERVIP1
First Service IPv6 Address
eNodeB
ADD SGW6 MOD SGW6 LST SGW6
SGW6
SERVIP1IPSECFL First Service IP AG IPsec Flag
eNodeB
SGW6
IKEPEERNM1
eNodeB
SGW6
IPSECPROPNM1
SGW6
SERVIP2
Second Service IPv6 Address
eNodeB
SGW6
SERVIP2IPSECFL Second Service IP AG IPsec Flag
eNodeB
SGW6
IKEPEERNM2
eNodeB
SGW6
IPSECPROPNM2
eNodeB
SGW6
SERVIP3
Third Service IPv6 Address
eNodeB
SGW6
SERVIP3IPSECFL Third Service IP AG IPsec Flag
eNodeB
SGW6
IKEPEERNM3
Third IPv6 IKEPeer eNodeB Name
SGW6
IPSECPROPNM3
Third IPsec Proposal Name
eNodeB
SGW6
SERVIP4
Fourth Service IPv6 eNodeB Address
SGW6
SERVIP4IPSECFL Fourth Service IP AG IPsec Flag
eNodeB
SGW6
IKEPEERNM4
Fourth IPv6 IKEPeer Name
eNodeB
SGW6
IPSECPROPNM4
Fourth IPsec Proposal Name
eNodeB
SGW6
DESCRIPTION
Description of SGW6
eNodeB
SGW6
CNOPERATORID
CN Operator ID
eNodeB
X2ServIP
CN
Cabinet No.
eNodeB
ADD X2SERVIP MOD X2SERVIP LST X2SERVIP
X2ServIP
SRN
Subrack No.
eNodeB
X2ServIP
SN
Slot No.
eNodeB
X2ServIP
X2SERVIPID
X2 service IP ID
eNodeB
ADD X2SERVIP LST X2SERVIP MOD X2SERVIP RMV X2SERVIP
X2ServIP
X2SERVIP
X2 Service IP
eNodeB
X2ServIP
IPSECFLAG
IPSec Flag
eNodeB
X2ServIP
SEGWFLAG
SeGW Flag
eNodeB
X2ServIP
LOCIKEIP
Local IKE IP
eNodeB
X2ServIP
IKEPEERNM
IKEPeer Name
eNodeB
X2ServIP
IPSECPROPNM
IPsec Proposal Name
eNodeB
X2ServIP
PATHCHK
Path Check
eNodeB
X2ServIP
CNOPERATORID
CN Operator ID
eNodeB
X2SigIP
CN
Cabinet No.
eNodeB
ADD X2SIGIP MOD X2SIGIP LST X2SIGIP
X2SigIP
SRN
Subrack No.
eNodeB
X2SigIP
SN
Slot No.
eNodeB
X2SigIP
X2SIGIPID
X2 signal IP ID
eNodeB
ADD X2SIGIP LST X2SIGIP MOD X2SIGIP RMV X2SIGIP
X2SigIP
LOCIP
Local IP
eNodeB
X2SigIP
IPSECFLAG
IPSec Flag
eNodeB
X2SigIP
SEGWFLAG
SeGW Flag
eNodeB
X2SigIP
IKEIP
Local IKE IP
eNodeB
X2SigIP
IKEPEERNM
IKEPeer Name
eNodeB
X2SigIP
IPSECPROPNM
IPsec Proposal Name
eNodeB
X2SigIP
SECLOCIP
Second Local IP
eNodeB
X2SigIP
SECIPSECFLAG
X2SigIP
SECSEGWFLAG
Second SeGW Flag eNodeB
X2SigIP
SECLOCIKEIP
Second Local IKEIP eNodeB
X2SigIP
SECIKEPEERNM
Second IKEPeer Name
eNodeB
X2SigIP
SECIPSECPROPN Second IPsec M Proposal Name
eNodeB
X2SigIP
LOCPORT
Local Port No.
eNodeB
X2SigIP
RTOMIN
RTO Min Value
eNodeB
X2SigIP
RTOMAX
RTO Max Value
eNodeB
X2SigIP
RTOINIT
RTO Initial Value
eNodeB
X2SigIP
RTOALPHA
RTO Alpha Value
eNodeB
X2SigIP
RTOBETA
RTO Beta Value
eNodeB
X2SigIP
HBINTER
Heart-beat Interval
eNodeB
X2SigIP
MAXASSOCRETR
eNodeB
X2SigIP
MAXPATHRETR
eNodeB
X2SigIP
CHKSUMTX
eNodeB
X2SigIP
CHKSUMRX
eNodeB
X2SigIP
CHKSUMTYPE
eNodeB
X2SigIP
eNodeB
X2SigIP
eNodeB
X2SigIP
TSACK
SACK Timeout
eNodeB
X2SigIP
CNOPERATORID
CN Operator ID
eNodeB
X2eNodeB
X2ENODEBID
X2eNodeB ID
eNodeB
ADD X2ENODEB DSP X2ENODEB LST X2ENODEB MOD X2ENODEB RMV X2ENODEB
X2eNodeB
FIRSTSIGIP
First Signalling IP
eNodeB
ADD X2ENODEB MOD X2ENODEB LST X2ENODEB
X2eNodeB
FIRSTIPSECFLAG
First Signalling IP IPSec Flag
eNodeB
X2eNodeB
FIRSTSEGWFLAG First SeGW Flag
eNodeB
X2eNodeB
FIRSTIKEIP
First IKE IP
eNodeB
X2eNodeB
SECSIGIP
Second Signalling IP
eNodeB
X2eNodeB
SECIPSECFLAG
X2eNodeB
SECSEGWFLAG
Second SeGW Flag eNodeB
X2eNodeB
SECIKEIP
Second IKE IP
eNodeB
X2eNodeB
APPPORT
App Port No.
eNodeB
X2eNodeB
SERVIP1
First Service IP
eNodeB
X2eNodeB
SERVIP1IPSECFL First Service IP AG IPSec Flag
eNodeB
X2eNodeB
SERVIP1SEGWFL First Service IP AG SeGW Flag
eNodeB
X2eNodeB
SERVIP1IKEIP
First Service IP IKE eNodeB IP
X2eNodeB
SERVIP2
Second Service IP
eNodeB
X2eNodeB
SERVIP2IPSECFL Second Service IP AG IPSec Flag
eNodeB
X2eNodeB
SERVIP2SEGWFL Second Service IP AG SeGW Flag
eNodeB
X2eNodeB
SERVIP2IKEIP
Second Service IP IKE IP
eNodeB
X2eNodeB
SERVIP3
Third Service IP
eNodeB
X2eNodeB
SERVIP3IPSECFL Third Service IP AG IPSecFlag
eNodeB
X2eNodeB
SERVIP3SEGWFL Third Service IP AG SeGW Flag
eNodeB
X2eNodeB
SERVIP3IKEIP
Third Service IP IKE IP
eNodeB
X2eNodeB
SERVIP4
Fourth Service IP
eNodeB
X2eNodeB
SERVIP4IPSECFL Fourth Service IP AG IPSec Flag
eNodeB
X2eNodeB
SERVIP4SEGWFL Fourth Service IP AG SeGW Flag
eNodeB
X2eNodeB
SERVIP4IKEIP
Fourth Service IP IKE IP
eNodeB
X2eNodeB
MCC
Mobile Country Code
eNodeB
X2eNodeB
MNC
Mobile Network Code
eNodeB
X2eNodeB
ENODEBID
eNodeB ID
eNodeB
ADD X2ENODEB MOD X2ENODEB LST X2ENODEB ADD X2ENODEB MOD X2ENODEB LST X2ENODEB
X2eNodeB
DESCRIPTION
Description of X2eNodeB
eNodeB
X2eNodeB
CNOPERATORID
CN Operator ID
eNodeB
X2eNodeB
TARGETENODEB RELEASE
Target eNodeB Release
eNodeB
X2ServIP6
X2ServIP6ID
X2ServIP6 ID
eNodeB
ADD X2SERVIP6 LST X2SERVIP6 MOD X2SERVIP6 RMV X2SERVIP6
X2ServIP6
CN
Cabinet No.
eNodeB
ADD X2SERVIP6 MOD X2SERVIP6 LST X2SERVIP6
X2ServIP6
SRN
Subrack No.
eNodeB
X2ServIP6
SN
Slot No.
eNodeB
X2ServIP6
SERVIP
Service IP
eNodeB
X2ServIP6
SERVIPSECFLAG
Service IP IPsec Flag
eNodeB
X2ServIP6
SERVIPSECGWFL Service IP SecGW AG Flag
eNodeB
X2ServIP6
SERVIKEIP
Service IKE IP
eNodeB
X2ServIP6
IKEPEERNM
IPv6 IKEPeer Name eNodeB
X2ServIP6
IPSECPROPNM
IPsec Proposal Name
eNodeB
X2ServIP6
PATHCHK
Path Check
eNodeB
X2ServIP6
CNOPERATORID
CN Operator ID
eNodeB
X2SigIP6
X2SIGIP6ID
X2SigIP6 ID
eNodeB
ADD X2SIGIP6 LST X2SIGIP6 MOD X2SIGIP6 RMV X2SIGIP6
X2SigIP6
CN
Cabinet No.
eNodeB
ADD X2SIGIP6 MOD X2SIGIP6 LST X2SIGIP6
X2SigIP6
SRN
Subrack No.
eNodeB
X2SigIP6
SN
Slot No.
eNodeB
X2SigIP6
SIGIP1
First Local Signaling eNodeB IPv6 Address
X2SigIP6
SIGIP1SECFLAG
eNodeB
X2SigIP6
SIGIP1SEGWFLAG
First Signaling IP SecGW Flag
eNodeB
X2SigIP6
SIGIKEIP1
First Signaling IPv6 eNodeB IKE IP
X2SigIP6
IKEPEERNM1
eNodeB
X2SigIP6
IPSECPROPNM1
X2SigIP6
SIGIP2
Second Local Signaling IPv6 Address
eNodeB
X2SigIP6
SIGIP2SECFLAG
X2SigIP6
SIGIP2SEGWFLAG
Second Signaling IP eNodeB SeGW Flag
X2SigIP6
SIGIKEIP2
eNodeB
X2SigIP6
IKEPEERNM2
eNodeB
X2SigIP6
IPSECPROPNM2
eNodeB
X2SigIP6
LOCPORT
Local Port No.
eNodeB
X2SigIP6
RTOMIN
RTO Min Value
eNodeB
X2SigIP6
RTOMAX
RTO Max Value
eNodeB
X2SigIP6
RTOINIT
RTO Initial Value
eNodeB
X2SigIP6
RTOALPHA
RTO Alpha Value
eNodeB
X2SigIP6
RTOBETA
RTO Beta Value
eNodeB
X2SigIP6
HBINTER
Heart-beat Interval
eNodeB
X2SigIP6
MAXASSOCRETR
eNodeB
X2SigIP6
MAXPATHRETR
eNodeB
X2SigIP6
CHKSUMTX
eNodeB
X2SigIP6
CHKSUMRX
eNodeB
ADD X2SIGIP6 MOD X2SIGIP6 LST X2SIGIP6 ADD X2SIGIP6 MOD X2SIGIP6 LST X2SIGIP6
X2SigIP6
CHKSUMTYPE
eNodeB
X2SigIP6
eNodeB
X2SigIP6
eNodeB
X2SigIP6
CNOPERATORID
CN Operator ID
eNodeB
X2eNodeB6
X2ENODEBID
X2eNodeB6 ID
eNodeB
ADD X2ENODEB6 DSP X2ENODEB6 LST X2ENODEB6 MOD X2ENODEB6 RMV X2ENODEB6
X2eNodeB6
SIGIP1
First Signaling IPv6 eNodeB Address
ADD X2ENODEB6 MOD X2ENODEB6 LST X2ENODEB6
X2eNodeB6
SIGIP1SECFLAG
eNodeB
X2eNodeB6
SIGIP1SEGWFLAG
First Signaling IP SeGW Flag
eNodeB
X2eNodeB6
SIGIKEIP1
First Signaling IPv6 eNodeB IKE IP
X2eNodeB6
SIGIP2
Second Signaling IPv6 Address
eNodeB
X2eNodeB6
SIGIP2SECFLAG
X2eNodeB6
SIGIP2SECGWFLA Second Signaling IP eNodeB G SeGW Flag
X2eNodeB6
SIGIKEIP2
eNodeB
X2eNodeB6
LOCPORT
App Port No.
eNodeB
X2eNodeB6
SERVIP1
First Service IPv6 Address
eNodeB
X2eNodeB6
SERVIP1IPSECFL First Service IP AG IPsec Flag
eNodeB
X2eNodeB6
SERVIP1SECGWF First Service IP LAG SeGW Flag
eNodeB
X2eNodeB6
SERVIKEIP1
First Service IPv6 IKE IP
eNodeB
X2eNodeB6
SERVIP2
Second Service IPv6 Address
eNodeB
X2eNodeB6
SERVIP2IPSECFL Second Service IP AG IPsec Flag
eNodeB
X2eNodeB6
SERVIP2SEGWFL Second Service IP AG SeGW Flag
eNodeB
X2eNodeB6
SERVIKEIP2
Second Service IPv6 IKE IP
eNodeB
X2eNodeB6
SERVIP3
Third Service IPv6 Address
eNodeB
X2eNodeB6
SERVIP3IPSECFL Third Service IP AG IPsec Flag
eNodeB
X2eNodeB6
SERVIP3SEGWFL Third Service IP AG SeGW Flag
eNodeB
X2eNodeB6
SERVIKEIP3
Third Service IPv6 IKE IP
eNodeB
X2eNodeB6
SERVIP4
Fourth Service IPv6 eNodeB Address
X2eNodeB6
SERVIP4IPSECFL Fourth Service IP AG IPsec Flag
eNodeB
X2eNodeB6
SERVIP4SEGWFL Fourth Service IP AG SeGW Flag
eNodeB
X2eNodeB6
SERVIKEIP4
Fourth Service IPv6 eNodeB IKE IP
X2eNodeB6
MCC
Mobile Country Code
eNodeB
X2eNodeB6
MNC
Mobile Network Code
eNodeB
X2eNodeB6
ENODEBID
eNodeB ID
eNodeB
ADD X2ENODEB6 MOD X2ENODEB6 LST X2ENODEB6 ADD X2ENODEB6 MOD X2ENODEB6 LST X2ENODEB6
X2eNodeB6
DESCRIPTION
Description of X2eNodeB6
eNodeB
X2eNodeB6
CNOPERATORID
CN Operator ID
eNodeB
X2eNodeB6
TARGETENODEB RELEASE
Target eNodeB Release
eNodeB
CA
CANAME
Certificate Authority eNodeB Name
ADD CA LST CA MOD CA REQ DEVCERT RMV CA
CA
URL
Certificate Authority eNodeB URL
ADD CA MOD CA LST CA
CA
SIGNALG
Signature Algorithm eNodeB
ADD CA MOD CA LST CA
CERTREQ
COMMNAME
Common Name
eNodeB
MOD CERTREQ LST CERTREQ
CERTREQ
USERADDINFO
Common Name Additional Info.
eNodeB
CERTREQ
COUNTRY
Country
eNodeB
CERTREQ
ORG
Organization
eNodeB
CERTREQ
ORGUNIT
Organizational Unit eNodeB
CERTREQ
STATEPROVINCE State or Province NAME
eNodeB
CERTREQ
LOCALITY
Locality
eNodeB
CERTREQ
KEYUSAGE
Key Usage
eNodeB
CERTREQ
SIGNALG
Signature Algorithm eNodeB
CERTREQ
KEYSIZE
Key Size
eNodeB
MOD CERTREQ UPD DEVCERT LST CERTREQ
CERTREQ
LOCALNAME
Local Name
eNodeB
CERTREQ
LOCALIP
Local IP
eNodeB
CERTMK
APPCERT
Certificate File Name
eNodeB
ADD CERTMK DSP CERTMK REQ DEVCERT RMV CERTMK UPD DEVCERT DSP CMPSESSION LST CERTMK
CERTMK
SERIALNO
Serial Number
eNodeB
DSP CERTMK
CERTMK
COMMNAME
Common Name
eNodeB
DSP CERTMK
CERTMK
ISSUER
Issuer
eNodeB
DSP CERTMK
CERTMK
DATE
Expiration Date
eNodeB
DSP CERTMK
CERTMK
EFFECTDATE
Effective Date
eNodeB
DSP CERTMK
APPCERT
APPTYPE
Application Type
eNodeB
DSP APPCERT LST APPCERT MOD APPCERT TST APPCERT LST CERTTYPE
APPCERT
APPCERT
eNodeB
MOD APPCERT TST APPCERT DSP APPCERT LST APPCERT
APPCERT
ISSUER
Issuer
eNodeB
DSP APPCERT
APPCERT
COMMNAME
Common Name
eNodeB
DSP APPCERT
APPCERT
SERIALNO
Serial Number
eNodeB
DSP APPCERT
APPCERT
DATE
Expiration Date
eNodeB
DSP APPCERT
APPCERT
IKEPEER
IKEPeer Name
eNodeB
TST APPCERT
APPCERT
EFFECTDATE
Effective Date
eNodeB
DSP APPCERT
APPCERT
STATUS
Status
eNodeB
DSP APPCERT
APPCERT
SUPPORTTYPE
Application Type Supported By NE
eNodeB
None
CROSSCERT
CERTNAME
eNodeB
ADD CROSSCERT DSP CROSSCERT RMV CROSSCERT LST CROSSCERT
CROSSCERT
SERIALNO
Serial Number
eNodeB
DSP CROSSCERT
CROSSCERT
COMMNAME
Common Name
eNodeB
DSP CROSSCERT
CROSSCERT
ISSUER
Issuer Name
eNodeB
DSP CROSSCERT
CROSSCERT
DATE
Expiring Date
eNodeB
DSP CROSSCERT
CROSSCERT
STATUS
Status
eNodeB
DSP CROSSCERT
CROSSCERT
EFFECTDATE
Effective Date
eNodeB
DSP CROSSCERT
TRUSTCERT
CERTNAME
eNodeB
ADD TRUSTCERT DSP TRUSTCERT RMV TRUSTCERT LST TRUSTCERT
TRUSTCERT
SERIALNO
Serial Number
eNodeB
DSP TRUSTCERT
TRUSTCERT
COMMNAME
Common Name
eNodeB
DSP TRUSTCERT
TRUSTCERT
ISSUER
Issuer Name
eNodeB
DSP TRUSTCERT
TRUSTCERT
DATE
Expiring Date
eNodeB
DSP TRUSTCERT
TRUSTCERT
STATUS
Status
eNodeB
DSP TRUSTCERT
TRUSTCERT
EFFECTDATE
Effective Date
eNodeB
DSP TRUSTCERT
CRL
CERTNAME
CRL File Name
eNodeB
ADD CRL DSP CRL RMV CRL LST CRL
CRL
STATUS
Status
eNodeB
DSP CRL
CRL CRL
ISSUER NEXTDATE
Issuer Next Update
eNodeB eNodeB
DSP CRL DSP CRL
CRL
THISDATE
This Update
eNodeB
DSP CRL
CRLTSK
IP
IP Address
eNodeB
ADD CRLTSK LST CRLTSK
CRLTSK
USR
User Name
eNodeB
CRLTSK
PWD
Password
eNodeB
ADD CRLTSK
CRLTSK
PORT
Port No.
eNodeB
CRLTSK
FILENAME
File Name
eNodeB
CRLTSK
ISCRLTIME
Using CRL's Next Update
eNodeB
CRLTSK
PERIOD
CRL Updating Period
eNodeB
CRLTSK
TSKID
Task ID
eNodeB
ADD CRLTSK LST CRLTSK RMV CRLTSK
CRLTSK
CRLGETMETHOD Access Method
eNodeB
CRLTSK
SEARCHDN
Distinguish Name
eNodeB
CERTCHKTSK
ISENABLE
Certificate Validity Period Checking
eNodeB
SET CERTCHKTSK LST CERTCHKTSK SET CERTCHKTSK LST CERTCHKTSK
CERTCHKTSK
PERIOD
Checking Period
eNodeB
CERTCHKTSK
ALMRNG
Alarm Threshold
eNodeB
SET CERTCHKTSK LST CERTCHKTSK
CERTCHKTSK
UPDATEMETHOD Update Method
eNodeB
SET CERTCHKTSK LST CERTCHKTSK
CRLPOLICY
CRLPOLICY
CRL Using Policy
eNodeB
SET CRLPOLICY LST CRLPOLICY
ACL
ACLID
ACL ID
eNodeB
ADD ACL LST ACL MOD ACL RMV ACL
ACL
ACLDESC
Description
eNodeB
ADD ACL MOD ACL LST ACL
ACL6
ACLID
IPv6 ACL ID
eNodeB
ADD ACL6 LST ACL6 MOD ACL6 RMV ACL6
ACL6
ACLDESC
Description
eNodeB
ADD ACL6 MOD ACL6 LST ACL6 ADD ACLRULE LST ACLRULE MOD ACLRULE RMV ACLRULE ADD ACLRULE LST ACLRULE MOD ACLRULE RMV ACLRULE
ACLRULE
ACLID
ACL ID
eNodeB
ACLRULE
RULEID
Rule ID
eNodeB
ACLRULE
ACTION
Action
eNodeB
ADD ACLRULE LST ACLRULE
ACLRULE
PT
Protocol Type
eNodeB
ACLRULE
SIP
Source IP Address
eNodeB
ADD ACLRULE MOD ACLRULE LST ACLRULE
ACLRULE
SWC
Source Wildcard
eNodeB
ACLRULE
SMPT
Match Source Port
eNodeB
ACLRULE
SOP
Source Port Operate
eNodeB
ACLRULE
SPT1
Source Port 1
eNodeB
ACLRULE
SPT2
Source Port 2
eNodeB
ACLRULE
DIP
Destination IP Address
eNodeB
ACLRULE
DWC
Destination Wildcard
eNodeB
ACLRULE
DMPT
Match Destination Port
eNodeB
ACLRULE
DOP
Destination Port Operate
eNodeB
ACLRULE
DPT1
Destination Port 1
eNodeB
ACLRULE
DPT2
Destination Port 2
eNodeB
ACLRULE
MDSCP
Match DSCP
eNodeB
ACLRULE
DSCP
DSCP
eNodeB
ACLRULE
MFRG
Match Fragment Message
eNodeB
ACLRULE
VLANIDOP
VLAN ID Operate
eNodeB
ACLRULE
VLANID1
VLAN ID 1
eNodeB
ACLRULE
VLANID2
VLAN ID 2
eNodeB
ACLRULE6
ACLID
IPv6 ACL ID
eNodeB
ADD ACLRULE6 LST ACLRULE6 MOD ACLRULE6 RMV ACLRULE6 ADD ACLRULE6 LST ACLRULE6 MOD ACLRULE6 RMV ACLRULE6
ACLRULE6
RULEID
IPv6 Rule ID
eNodeB
ACLRULE6
ACTION
IPv6 ACL Action
eNodeB
ADD ACLRULE6 LST ACLRULE6
ACLRULE6
PT
Protocol Type
eNodeB
ACLRULE6
SIP
Source IPv6 Address
eNodeB
ADD ACLRULE6 MOD ACLRULE6 LST ACLRULE6
ACLRULE6
SPFXLEN
Source Address Prefix Length
eNodeB
ACLRULE6
SMPT
Match Source Port
eNodeB
ACLRULE6
SOP
Source Port Operate
eNodeB
ACLRULE6
SPT1
Source Port 1
eNodeB
ACLRULE6
SPT2
Source Port 2
eNodeB
ACLRULE6
DIP
Destination IPv6 Address
eNodeB
ACLRULE6
DPFXLEN
Destination Address eNodeB Prefix Length
ACLRULE6
DMPT
Match Destination Port
eNodeB
ACLRULE6
DOP
Destination Port Operate
eNodeB
ACLRULE6
DPT1
Destination Port 1
eNodeB
ACLRULE6
DPT2
Destination Port 2
eNodeB
ACLRULE6
MDSCP
Match DSCP
eNodeB
ACLRULE6
DSCP
DSCP
eNodeB
BFDSESSION
CN
Cabinet No.
eNodeB
ADD BFDSESSION DSP BFDSESSION MOD BFDSESSION RMV BFDSESSION LST BFDSESSION ADD BFDSESSION DSP BFDSESSION MOD BFDSESSION RMV BFDSESSION LST BFDSESSION ADD BFDSESSION DSP BFDSESSION MOD BFDSESSION RMV BFDSESSION LST BFDSESSION
BFDSESSION
SRN
Subrack No.
eNodeB
BFDSESSION
SN
Slot No.
eNodeB
BFDSESSION
BFDSN
Session ID
eNodeB
ADD BFDSESSION DSP BFDSESSION MOD BFDSESSION RMV BFDSESSION LST BFDSESSION
BFDSESSION
SRCIP
Source IP
eNodeB
ADD BFDSESSION MOD BFDSESSION DSP BFDSESSION LST BFDSESSION
BFDSESSION
DSTIP
Destination IP
eNodeB
BFDSESSION
HT
Hop Type
eNodeB
BFDSESSION
MINTI
Min TX Interval
eNodeB
ADD BFDSESSION MOD BFDSESSION DSP BFDSESSION LST BFDSESSION ADD BFDSESSION MOD BFDSESSION DSP BFDSESSION LST BFDSESSION ADD BFDSESSION MOD BFDSESSION DSP BFDSESSION LST BFDSESSION
BFDSESSION
MINRI
Min RX Interval
eNodeB
BFDSESSION
DM
Detection Multiplier eNodeB
BFDSESSION
CATLOG
Session Catalog
eNodeB
BFDSESSION
DSCP
DSCP
eNodeB
ADD BFDSESSION LST BFDSESSION
BFDSESSION
CLEAR
Clear Statistic
eNodeB
DSP BFDSESSION
BFDSESSION
FSMState
Session State
eNodeB
DSP BFDSESSION
BFDSESSION
ActualMode
Active Detecting Mode
eNodeB
DSP BFDSESSION
BFDSESSION
ActualMinTxInterval
Active Minimum Tx eNodeB Interval
DSP BFDSESSION
BFDSESSION
ActualMinRxInterval
Active Minimum Rx eNodeB Interval
DSP BFDSESSION
BFDSESSION
ActualDetectTime
Active Detection Time
eNodeB
DSP BFDSESSION
BFDSESSION
MyDiscreaminator
My Discriminator
eNodeB
DSP BFDSESSION
BFDSESSION
YourDiscreaminator Your Discriminator
eNodeB
DSP BFDSESSION
BFDSESSION
TxPDUCount
Number of TX PDUs
eNodeB
DSP BFDSESSION
BFDSESSION
RxPDUCount
Number of RX PDUs
eNodeB
DSP BFDSESSION
BFDSESSION
UptoDownCount
Total Number of Up eNodeB to Down Sessions
DSP BFDSESSION
BFDSESSION
Diagnostic
Session Diagnosis
eNodeB
DSP BFDSESSION
BFDSESSION
IFIndex
Interface Index
eNodeB
DSP BFDSESSION
BFDSESSION
VER
Protocol Version
eNodeB
ADD BFDSESSION MOD BFDSESSION LST BFDSESSION
CERTDEPLOY
DEPLOYTYPE
Certification Deploy eNodeB Position Type
SET CERTDEPLOY LST CERTDEPLOY
CERTDEPLOY
CN
Cabinet No.
eNodeB
SET CERTDEPLOY LST CERTDEPLOY SET CERTDEPLOY LST CERTDEPLOY SET CERTDEPLOY LST CERTDEPLOY ADD CFMBNDIP RMV CFMBNDIP LST CFMBNDIP
CERTDEPLOY
SRN
Subrack No.
eNodeB
CERTDEPLOY
SN
Slot No.
eNodeB
CFMBNDIP
MDNAME
MD Name
eNodeB
CFMBNDIP
MANAME
MA Name
eNodeB
ADD CFMBNDIP RMV CFMBNDIP LST CFMBNDIP
CFMBNDIP
RMEPID
RMEP ID
eNodeB
CFMBNDIP
BNDIP
IP Address
eNodeB
CFMMA
MDNAME
MD Name
eNodeB
ADD CFMMA DSP CFMMA MOD CFMMA RMV CFMMA LST CFMMA
CFMMA
MANAME
MA Name
eNodeB
ADD CFMMA DSP CFMMA MOD CFMMA RMV CFMMA LST CFMMA
CFMMA
CN
Cabinet No.
eNodeB
ADD CFMMA LST CFMMA
CFMMA
SRN
Subrack No.
eNodeB
ADD CFMMA LST CFMMA
CFMMA
SN
Slot No.
eNodeB
ADD CFMMA LST CFMMA ADD CFMMA DSP CFMMA LST CFMMA ADD CFMMA DSP CFMMA LST CFMMA
CFMMA
BNDVLAN
Binding VLAN
eNodeB
CFMMA
VLANID
VLAN ID
eNodeB
CFMMA
VLANPRI
VLAN Priority
eNodeB
ADD CFMMA MOD CFMMA DSP CFMMA LST CFMMA ADD CFMMA MOD CFMMA DSP CFMMA LST CFMMA DSP CFMMA
CFMMA
CCMINTL
CCM TX Interval
eNodeB
CFMMA
MEPNumber
Number of MEPs
eNodeB
CFMMA
RMEPNumber
Number of RMEPs
eNodeB
DSP CFMMA
CFMMA CFMMA
MEPList RMEPList
MEP List RMEP List
eNodeB eNodeB
DSP CFMMA DSP CFMMA
CFMMD
MDNAME
MD Name
eNodeB
ADD CFMMD DSP CFMMD RMV CFMMD LST CFMMD
CFMMD
LEVEL
MD Level
eNodeB
ADD CFMMD DSP CFMMD DSP CFMMA DSP CFMMEP DSP CFMRMEP LST CFMMD DSP CFMMD
CFMMD
MANumber
MA Number
eNodeB
CFMMD
MANameList
MA List
eNodeB
DSP CFMMD ACT CFMCC ADD CFMMEP DEA CFMCC DSP CFMMEP RMV CFMMEP LST CFMMEP
CFMMEP
MDNAME
MD Name
eNodeB
CFMMEP
MANAME
MA Name
eNodeB
ACT CFMCC ADD CFMMEP DEA CFMCC DSP CFMMEP RMV CFMMEP LST CFMMEP
CFMMEP
MEPID
MEP ID
eNodeB
ACT CFMCC ADD CFMMEP DEA CFMCC DSP CFMMEP RMV CFMMEP LST CFMMEP
CFMMEP
CN
Cabinet No.
eNodeB
ADD CFMMEP LST CFMMEP
CFMMEP
SRN
Subrack No.
eNodeB
CFMMEP
SN
Slot No.
eNodeB
CFMMEP
SBT
Subboard Type
eNodeB
CFMMEP
PT
Port Type
eNodeB
CFMMEP
PN
Port No.
eNodeB
CFMMEP
CCSW
CC Switch
eNodeB
DSP CFMMEP LST CFMMEP
CFMMEP
BindingVLAN
Binding VLAN
eNodeB
DSP CFMMEP
CFMMEP
VLANID
VLAN ID
eNodeB
DSP CFMMEP
CFMMEP
VLANPri
VLAN Priority
eNodeB
DSP CFMMEP
CFMMEP
TxCCPDU
Number of TX CCM eNodeB PDUs
DSP CFMMEP
CFMMEP
RxCCPDU
Number of RX CCM eNodeB PDUs
DSP CFMMEP
CFMMEP
TxLBPDU
Number of TX Loopback PDUs Number of RX Loopback PDUs Number of TX Link Trace PDUs
eNodeB
DSP CFMMEP
CFMMEP
RxLBPDU
eNodeB
DSP CFMMEP
CFMMEP
TxLTPDU
eNodeB
DSP CFMMEP
CFMMEP
RxLTPDU
Number of RX Link eNodeB Trace PDUs Number of TX Success CFM PDUs Number of RX Success CFM PDUs
DSP CFMMEP
CFMMEP
TxSuccCFMPDU
eNodeB
DSP CFMMEP
CFMMEP
RxSuccCFMPDU
eNodeB
DSP CFMMEP
CFMMEP
Number of TX TxDroppedCFMPD Dropped CFM U PDUs Number of RX RxDroppedCFMPD Dropped CFM U PDUs
eNodeB
DSP CFMMEP
CFMMEP
eNodeB
DSP CFMMEP
CFMRMEP
MDNAME
MD Name
eNodeB
ADD CFMRMEP DSP CFMRMEP RMV CFMRMEP LST CFMRMEP
CFMRMEP
MANAME
MA Name
eNodeB
CFMRMEP
RMEPID
RMEP ID
eNodeB
CFMRMEP
MAC
MAC Address
eNodeB
ADD CFMRMEP DSP CFMRMEP LST CFMRMEP
CFMRMEP
Status
Status Actual MAC Address
eNodeB
DSP CFMRMEP
CFMRMEP
ActualMAC
eNodeB
DSP CFMRMEP
CFMRMEP
BindingVLAN
Binding VLAN
eNodeB
DSP CFMRMEP
CFMRMEP
VLANID
VLAN ID
eNodeB
DSP CFMRMEP
CFMRMEP
RxCCMPDU
Number of RX CCM eNodeB PDUs
DSP CFMRMEP
CFMRMEP
IPNumber
Number of Bound IPs
eNodeB
DSP CFMRMEP
CFMRMEP
IPList
IP Address List
eNodeB
DSP CFMRMEP ADD DBGSVR DSP DBGSVR MOD DBGSVR RMV DBGSVR LST DBGSVR
DBGSVR
SERVICETYPE
Service Type
eNodeB
DBGSVR
SERVICEPORT
Service Port
eNodeB
ADD DBGSVR DSP DBGSVR MOD DBGSVR RMV DBGSVR LST DBGSVR
DBGSVR
SWITCH
Enable Flag
eNodeB
ADD DBGSVR MOD DBGSVR DSP DBGSVR LST DBGSVR
DEVIP
CN
Cabinet No.
eNodeB
ADD DEVIP DSP DEVIP RMV DEVIP LST DEVIP ADD DEVIP DSP DEVIP RMV DEVIP LST DEVIP ADD DEVIP DSP DEVIP RMV DEVIP LST DEVIP
DEVIP
SRN
Subrack No.
eNodeB
DEVIP
SN
Slot No.
eNodeB
DEVIP
SBT
Subboard Type
eNodeB
ADD DEVIP RMV DEVIP DSP DEVIP LST DEVIP
DEVIP
PT
Port Type
eNodeB
DEVIP
PN
Port No.
eNodeB
DEVIP
IP
IP Address
eNodeB
DEVIP
MASK
Mask
eNodeB
ADD DEVIP DSP DEVIP LST DEVIP
DEVIP6
ITFIDX
Interface Index
eNodeB
ADD DEVIP6 DSP DEVIP6 RMV DEVIP6 LST DEVIP6 ADD DEVIP6 RMV DEVIP6 DSP DEVIP6 LST DEVIP6
DEVIP6
IPV6
IPv6 Address
eNodeB
DEVIP6
PFXLEN
Prefix Length
eNodeB
ADD DEVIP6 DSP DEVIP6 LST DEVIP6
DEVIP6
AddressStatus
Address Status
eNodeB
DSP DEVIP6
DEVIP6
ValidLifetime
Valid Lifetime
eNodeB
DSP DEVIP6
DEVIP6
PreferredLifetime
Preferred Lifetime
eNodeB
DSP DEVIP6
DHCPRELAYSWITCH ES
DHCP Relay Switch eNodeB
SET DHCPRELAYSWIT CH LST DHCPRELAYSWIT CH
DHCPSVRIP
DHCPSVRIP
DHCP Server IP Address
eNodeB
ADD DHCPSVRIP RMV DHCPSVRIP LST DHCPSVRIP
DHCPSW
SWITCH
OMCH AutoEstablishment Switch
eNodeB
SET DHCPSW LST DHCPSW
DIFPRI
PRIRULE
Priority Rule
eNodeB
SET DIFPRI LST DIFPRI
DIFPRI
SIGPRI
Signaling Priority
eNodeB
DIFPRI
OMHIGHPRI
OM High Priority
eNodeB
DIFPRI
OMLOWPRI
OM Low Priority
eNodeB
DIFPRI
PTPPRI
IPClock Priority
eNodeB
DIFPRI
DT1PRI
User Data 1 Priority eNodeB
DIFPRI
DT1TYPE
User Data 1 Primary Transport Resource Type
eNodeB
DIFPRI
DT1PRIMTH
User Data 1 Primary Port Load Threshold
eNodeB
DIFPRI
User Data 1 Primary To DT1PRIMTOSECR Secondary Port ATIOTH Load Ratio Threshold
eNodeB
DIFPRI
DT2PRI
DIFPRI
DT2TYPE
eNodeB
DIFPRI
DT2PRIMTH
eNodeB
DIFPRI
eNodeB
DIFPRI
DT3PRI
DIFPRI
DT3TYPE
eNodeB
DIFPRI
DT3PRIMTH
eNodeB
DIFPRI
eNodeB
DIFPRI
DT4PRI
DIFPRI
DT4TYPE
eNodeB
DIFPRI
DT4PRIMTH
eNodeB
DIFPRI
eNodeB
DIFPRI
DT5PRI
DIFPRI
DT5TYPE
eNodeB
DIFPRI
DT5PRIMTH
eNodeB
DIFPRI
eNodeB
DIFPRI
DT6PRI
DIFPRI
DT6TYPE
eNodeB
DIFPRI
DT6PRIMTH
eNodeB
DIFPRI
eNodeB
DIFPRI
DT7PRI
DIFPRI
DT7TYPE
eNodeB
DIFPRI
DT7PRIMTH
eNodeB
DIFPRI
eNodeB
DIFPRI
DT8PRI
DIFPRI
DT8TYPE
eNodeB
DIFPRI
DT8PRIMTH
eNodeB
DIFPRI
eNodeB
DIFPRI
DT9PRI
DIFPRI
DT9TYPE
eNodeB
DIFPRI
DT9PRIMTH
eNodeB
DIFPRI
eNodeB
DLITFCALG
BCDLITFCSW
Bit Congestion Down Link Internal eNodeB Flow Control Switch
SET DLITFCALG LST DLITFCALG
DLITFCALG
PCDLITFCSW
Packet Congestion Down Link Internal eNodeB Flow Control Switch
SET DLITFCALG LST DLITFCALG
DOT1X
CN
Cabinet No.
eNodeB
ACT DOT1X DEA DOT1X DSP DOT1X LST DOT1X
DOT1X
SRN
Subrack No.
eNodeB
DOT1X
SN
Slot No.
eNodeB
DOT1X
SBT
Subboard Type
eNodeB
DOT1X
PN
Port No.
eNodeB
DOT1X
AM
Authentic Method
eNodeB
ACT DOT1X DSP DOT1X LST DOT1X
DOT1X
APN
Abnormal Packet Number
eNodeB
DSP DOT1X
DOT1X
AFN
Fail Number
eNodeB
DSP DOT1X
DOT1X
AFR
Fail Reason
eNodeB
DSP DOT1X
DOT1X
RPN
Receive EAP Packet Number
eNodeB
DSP DOT1X
DOT1X
AR
Authentic State
eNodeB
DSP DOT1X
DOT1X
SPN
Send EAP Packet Number
eNodeB
DSP DOT1X
DOT1X
ASN
Authentic Succeed Number
eNodeB
DSP DOT1X
DSCPMAP
DSCP
Differentiated Service Codepoint
eNodeB
DSP DSCPMAP LST DSCPMAP SET DSCPMAP
DSCPMAP
VLANPRIO
VLAN Priority
eNodeB
SET DSCPMAP DSP DSCPMAP LST DSCPMAP
E1T1
CN
Cabinet No.
eNodeB
ADD E1T1 DSP E1T1 RMV E1T1 SET E1T1 LST E1T1
E1T1
SRN
Subrack No.
eNodeB
ADD E1T1 DSP E1T1 RMV E1T1 SET E1T1 LST E1T1 ADD E1T1 DSP E1T1 RMV E1T1 SET E1T1 LST E1T1 ADD E1T1 DSP E1T1 RMV E1T1 SET E1T1 LST E1T1 ADD E1T1 DSP E1T1 RMV E1T1 SET E1T1 LST E1T1
E1T1
SN
Slot No.
eNodeB
E1T1
PN
Port No.
eNodeB
E1T1
PS
Port Selection
eNodeB
E1T1
WORKMODE
Work Mode
eNodeB
ADD E1T1 SET E1T1 LST E1T1
E1T1
FRAME
Frame Format
eNodeB
E1T1
LNCODE
Line Code
eNodeB
E1T1
CLKM
Clock Mode
eNodeB
ADD E1T1 SET E1T1 DSP E1T1 LST E1T1
E1T1
LinkRunningStatus Link Running Status eNodeB
DSP E1T1
E1T1
ExecuteLinkTestFla Link Test Execution eNodeB g Status
DSP E1T1
E1T1
UsedFlag
Used Flag
eNodeB
DSP E1T1
E1T1
LoopLeftTime
Loop Left Time
eNodeB
DSP E1T1
E1T1
SBT
Subboard Type
eNodeB
ADD E1T1 DSP E1T1 RMV E1T1 SET E1T1 LST E1T1
E1T1
ActualWorkMode
Actual Work Mode
eNodeB
DSP DHCPRSLT DSP E1T1
E1T1
ActualFrameFormat
Actual Frame Format
eNodeB
E1T1
ActualLineCode
Actual Line Code
eNodeB
E1T1BER
BTL
E1/T1 BER Threshold Level
eNodeB
SET E1T1BER LST E1T1BER ACT ETHOAM3AH DEA ETHOAM3AH DSP ETHOAM3AH LST ETHOAM3AH ACT ETHOAM3AH DEA ETHOAM3AH DSP ETHOAM3AH LST ETHOAM3AH ACT ETHOAM3AH DEA ETHOAM3AH DSP ETHOAM3AH LST ETHOAM3AH
ETHOAM3AH
CN
Cabinet No.
eNodeB
ETHOAM3AH
SRN
Subrack No.
eNodeB
ETHOAM3AH
SN
Slot No.
eNodeB
ETHOAM3AH
SBT
Subboard Type
eNodeB
ACT ETHOAM3AH DEA ETHOAM3AH DSP ETHOAM3AH LST ETHOAM3AH
ETHOAM3AH
PT
Port Type
eNodeB
ETHOAM3AH
PN
Port No.
eNodeB
ETHOAM3AH
WORKMODE
Working Mode
eNodeB
ACT ETHOAM3AH LST ETHOAM3AH
ETHOAM3AH
DTPRD
Detection Period
eNodeB
ETHOAM3AH
PDUSIZE
PDU Size
eNodeB
ETHOAM3AH
RMTLBFLG
Loopback Flag
eNodeB
ETHOAM3AH
FLTINDFLG
Fault Report Flag
eNodeB
ACT ETHOAM3AH LST ETHOAM3AH ACT ETHOAM3AH LST ETHOAM3AH
ETHOAM3AH
ERRFRMEVTPRD
Error Frame Event Duration
eNodeB
ETHOAM3AH
ERRFRMEVTTHD
Error Frame Event Threshold
eNodeB
ETHOAM3AH
ERRFRMSCDEVT PRD
Error Frame Seconds Summary eNodeB Event Duration
ETHOAM3AH
Error Frame ERRFRMSCDEVTT Seconds Summary eNodeB HD Event Threshold
ETHOAM3AH
FSMState
Current State
eNodeB
DSP ETHOAM3AH
ETHOAM3AH
RxDropOAMPDUC Number of RX eNodeB ount Dropped OAMPDUs RxEventOAMPDUC Number of RX ount Event OAMPDUs
DSP ETHOAM3AH
ETHOAM3AH
eNodeB
DSP ETHOAM3AH
ETHOAM3AH
RxFaultOAMPDUC Number of RX Fault eNodeB ount OAMPDUs Number of RX RxInfoOAMPDUCo Information unt OAMPDUs Number of RX RxLoopbackOAMP Loopback Control DUCount OAMPDUs
DSP ETHOAM3AH
ETHOAM3AH
eNodeB
DSP ETHOAM3AH
ETHOAM3AH
eNodeB
DSP ETHOAM3AH
ETHOAM3AH
RxTotalOAMPDUC Total Number of RX eNodeB ount OAMPDUs
DSP ETHOAM3AH
ETHOAM3AH
TxDropOAMPDUCo Number of TX eNodeB unt Dropped OAMPDUs
DSP ETHOAM3AH
ETHOAM3AH
TxEventOAMPDUC Number of TX ount Event OAMPDUs
eNodeB
DSP ETHOAM3AH
ETHOAM3AH
TxFaultOAMPDUCo Number of TX Fault eNodeB unt OAMPDUs
DSP ETHOAM3AH
ETHOAM3AH
Number of TX TxInfoOAMPDUCo Information unt OAMPDUs
eNodeB
DSP ETHOAM3AH
ETHOAM3AH
Number of TX TxLoopbackOAMP Loopback Control DUCount OAMPDUs
eNodeB
DSP ETHOAM3AH
ETHOAM3AH
TxTotalOAMPDUC Total Number of TX eNodeB ount OAMPDUs
DSP ETHOAM3AH
ETHPORT
CN
Cabinet No.
eNodeB
ADD ETHPORT DSP ETHPORT RMV ETHPORT RST ETHPORT SET ETHPORT LST ETHPORT
ETHPORT
SRN
Subrack No.
eNodeB
ADD ETHPORT DSP ETHPORT RMV ETHPORT RST ETHPORT SET ETHPORT LST ETHPORT ADD ETHPORT DSP ETHPORT RMV ETHPORT RST ETHPORT SET ETHPORT LST ETHPORT
ETHPORT
SN
Slot No.
eNodeB
ETHPORT
SBT
Subboard Type
eNodeB
ETHPORT
PN
Port No.
eNodeB
ETHPORT
PA
Port Attribute
eNodeB
ADD ETHPORT SET ETHPORT DSP DHCPRSLT DSP ETHPORT LST ETHPORT
ETHPORT
MTU
Maximum Transmission Unit
eNodeB
ADD ETHPORT SET ETHPORT DSP ETHPORT LST ETHPORT
ETHPORT
SPEED
Speed
eNodeB
ADD ETHPORT SET ETHPORT DSP DHCPRSLT LST ETHPORT
ETHPORT
DUPLEX
Duplex
eNodeB
ADD ETHPORT SET ETHPORT DSP DHCPRSLT LST ETHPORT
ETHPORT
ARPPROXY
ARP Proxy
eNodeB
ETHPORT
FC
Flow Control
eNodeB
ETHPORT
FERAT
MAC Frame Error Rate Occur Threshold
eNodeB
ADD ETHPORT SET ETHPORT LST ETHPORT
ETHPORT
FERDT
MAC Frame Error Rate Clear Threshold
eNodeB
ADD ETHPORT SET ETHPORT LST ETHPORT
ETHPORT
MAC
MAC Address
eNodeB
DSP ETHPORT
ETHPORT
PortStatus
Port Status
eNodeB
DSP ETHPORT
ETHPORT
LoopbackStatus
Loopback Status
eNodeB
DSP ETHPORT
ETHPORT
InLoopbackTestMo In Loopback Mode de or Not
eNodeB
DSP ETHPORT
ETHPORT
OAM3AHEnableFla Ethernet OAM 3AH eNodeB g Flag Number of RX Packets
DSP ETHPORT
ETHPORT
RxPackets
eNodeB
DSP ETHPORT
ETHPORT
RxBytes
Number of RX Bytes
eNodeB
DSP ETHPORT
ETHPORT
RxCRCError
Number of RX CRC eNodeB Error Packets
DSP ETHPORT
ETHPORT
RxFlowRate
RX Traffic
eNodeB
DSP ETHPORT
ETHPORT
TxPackets
Number of TX Packets
eNodeB
DSP ETHPORT
ETHPORT
TxBytes
Number of TX Bytes eNodeB
DSP ETHPORT
ETHPORT
TxFlowRate
TX Traffic
eNodeB
DSP ETHPORT
ETHPORT
IPNum
Number of IPs
eNodeB
DSP ETHPORT
ETHPORT
IPList
IP Address List
eNodeB
DSP ETHPORT
ETHPORT
LocCfgNegoMode
Local Configuration eNodeB Negotiation Mode Local Actual Negotiation Mode
DSP ETHPORT
ETHPORT
LocRealNegoMode
eNodeB
DSP ETHPORT
ETHPORT
LocSpeed
Local Speed
eNodeB
DSP ETHPORT
ETHPORT
LocDuplex
Local Duplex
eNodeB
DSP ETHPORT
ETHPORT
PeerNegoMode
Peer Actual Negotiation Mode
eNodeB
DSP ETHPORT
ETHPORT
PeerSpeed
Peer Speed
eNodeB
DSP ETHPORT
ETHPORT
PeerDuplex
Peer Duplex
eNodeB
DSP ETHPORT
ETHPORT
PhyLayerStat
Physical Layer Status
eNodeB
DSP ETHPORT ADD ETHTRK DSP ETHTRK MOD ETHTRK RMV ETHTRK LST ETHTRK ADD ETHTRK DSP ETHTRK MOD ETHTRK RMV ETHTRK LST ETHTRK ADD ETHTRK DSP ETHTRK MOD ETHTRK RMV ETHTRK LST ETHTRK
ETHTRK
CN
Cabinet No.
eNodeB
ETHTRK
SRN
Subrack No.
eNodeB
ETHTRK
SN
Slot No.
eNodeB
ETHTRK
TN
Trunk No.
eNodeB
ADD ETHTRK DSP ETHTRK MOD ETHTRK RMV ETHTRK LST ETHTRK
ETHTRK
LACP
Trunk Type
eNodeB
ADD ETHTRK MOD ETHTRK DSP DHCPRSLT DSP ETHTRK LST ETHTRK
ETHTRK
ARPPROXY
ARP Proxy
eNodeB
ADD ETHTRK MOD ETHTRK DSP ETHTRK LST ETHTRK
ETHTRK
SBT
Subboard Type
eNodeB
ADD ETHTRK DSP ETHTRK MOD ETHTRK RMV ETHTRK LST ETHTRK
ETHTRK
MTU
Max Transmission Unit
eNodeB
ADD ETHTRK MOD ETHTRK DSP ETHTRK LST ETHTRK
ETHTRK
EthTrunkStatus
Ethernet Trunk Status
eNodeB
DSP ETHTRK
ETHTRK
LocalMAC
Local MAC Address eNodeB
DSP ETHTRK
ETHTRK
PeerSysMAC
Peer System MAC Address
eNodeB
DSP ETHTRK
ETHTRK
EthTrunkLinkNum
Number of Ethernet eNodeB Trunk Ports
DSP ETHTRK
ETHTRK
EthTrunkLinkIDs
Ethernet Trunk Port eNodeB No.
DSP ETHTRK LST ETHTRK
ETHTRK
EthTrunkLinkUpNu Number of Active m Trunk Ports
eNodeB
DSP ETHTRK
ETHTRK
EthTrunkLinkUpIDs
Active Trunk Port No.
eNodeB
DSP ETHTRK
ETHTRK
RxPackets
Number of RX Packets
eNodeB
DSP ETHTRK
ETHTRK
RxBytes
Number of RX Bytes
eNodeB
DSP ETHTRK
ETHTRK
RxDroppedPackets
Number of RX Dropped Packets
eNodeB
DSP ETHTRK
ETHTRK
RxDroppedBytes
Number of RX Dropped Bytes
eNodeB
DSP ETHTRK
ETHTRK
TxPackets
eNodeB
DSP ETHTRK
ETHTRK
TxBytes
DSP ETHTRK
ETHTRK
TxDroppedPackets
Number of TX Dropped Packets
eNodeB
DSP ETHTRK
ETHTRK
TxDroppedBytes
Number of TX Dropped Bytes
eNodeB
DSP ETHTRK
ETHTRK
IPNum
Number of IPs
eNodeB
DSP ETHTRK
ETHTRK
IPList
IP Address List
eNodeB
DSP ETHTRK
ETHTRKLNK
CN
Cabinet No.
eNodeB
ADD ETHTRKLNK DSP ETHTRKLNK RMV ETHTRKLNK LST ETHTRKLNK
ETHTRKLNK
SRN
Subrack No.
eNodeB
ETHTRKLNK
SN
Slot No.
eNodeB
ADD ETHTRKLNK DSP ETHTRKLNK RMV ETHTRKLNK LST ETHTRKLNK ADD ETHTRKLNK DSP ETHTRKLNK RMV ETHTRKLNK LST ETHTRKLNK
ETHTRKLNK
TN
Trunk No.
eNodeB
ETHTRKLNK
PN
Ethernet Port No.
eNodeB
ETHTRKLNK
PRI
Port Priority
eNodeB
ADD ETHTRKLNK DSP ETHTRKLNK LST ETHTRKLNK
ETHTRKLNK
FLAG
Master Flag
eNodeB
ADD ETHTRKLNK LST ETHTRKLNK
ETHTRKLNK
SBT
Subboard Type
eNodeB
ETHTRKLNK
PortStatus
Port Status
eNodeB
DSP ETHTRKLNK
ETHTRKLNK
MAC
MAC Address
eNodeB
DSP ETHTRKLNK
ETHTRKLNK
LocalTimeoutMode
Local Timeout Mode
eNodeB
DSP ETHTRKLNK
ETHTRKLNK
PeerTimeoutMode
Peer Timeout Mode eNodeB
DSP ETHTRKLNK
ETHTRKLNK
RxLACPPackets
Number of RX LACP Packets
eNodeB
DSP ETHTRKLNK
ETHTRKLNK
TxLACPPackets
Number of TX LACP Packets
eNodeB
DSP ETHTRKLNK
EXTUDT
EXTUDTNO
User Data Type Number
eNodeB
ADD EXTUDT MOD EXTUDT RMV EXTUDT LST EXTUDT
EXTUDT
Extern User Data EXTUDTPARAGRP Type Transfer ID Parameter Group ID.
eNodeB
ADD EXTUDT MOD EXTUDT LST EXTUDT
Extern User Data EXTUDTPARAGRP Type Transfer EXTUDTPARAGRP ID Parameter Group ID.
eNodeB
ADD EXTUDTPARAGRP LST EXTUDTPARAGRP MOD EXTUDTPARAGRP RMV EXTUDTPARAGRP
EXTUDTPARAGRP PRI
Priority
eNodeB
ADD EXTUDTPARAGRP MOD EXTUDTPARAGRP LST EXTUDTPARAGRP
EXTUDTPARAGRP ACTFACTOR
Act Factor
eNodeB
EXTUDTPARAGRP
PRIMTRANRSCTY Primary Transport PE Resource Type
eNodeB
EXTUDTPARAGRP PRIMPTLOADTH
Primary Port Load Threshold
eNodeB
Primary To PRIM2SECPTLOA Secondary Port EXTUDTPARAGRP DRATH Load Ratio Threshold
eNodeB
FLOODDEFEND
FLDTYPE
Flood Type
eNodeB
ADD FLOODDEFEND DSP FLOODDEFEND MOD FLOODDEFEND RMV FLOODDEFEND LST FLOODDEFEND ADD FLOODDEFEND MOD FLOODDEFEND LST FLOODDEFEND
FLOODDEFEND
DFDSW
Defend Switch
eNodeB
FLOODDEFEND
DFDTHD
Defend Threshold
eNodeB
ADD FLOODDEFEND MOD FLOODDEFEND LST FLOODDEFEND
FLOODDEFEND
ALMSW
Alarm Switch
eNodeB
FLOODDEFEND
ALMTHD
Alarm Threshold
eNodeB
FLOODDEFEND
Packets
Number of Flood Droped Packets
eNodeB
DSP FLOODDEFEND
FLOODDEFEND
RcvTotalPkt
Receive Total packets
eNodeB
DSP FLOODDEFEND
GTRANSPARA
LPSCHSW
Resource Group Scheduling Weight eNodeB Switch
SET GTRANSPARA LST GTRANSPARA
GTRANSPARA
RATECFGTYPE
Rate Config Type
eNodeB
GTRANSPARA
SBTIME
Switch Back Time
eNodeB
IKECFG
IKELNM
Local Name
eNodeB
SET IKECFG DSP IKECFG LST IKECFG
IKECFG
IKEKLI
Keepalive Interval
eNodeB
IKECFG
IKEKLT
Keepalive Timeout
eNodeB
IKECFG
DSCP
DSCP
eNodeB
SET IKECFG DSP IKECFG LST IKECFG DSP IKECFG
IKECFG
CabinetNo
Cabinet No.
eNodeB
IKECFG
SubrackNo
Subrack No.
eNodeB
DSP IKECFG
IKECFG
SlotNo
Slot No.
eNodeB
DSP IKECFG
IKEPEER
PEERNAME
IKE Peer Name
eNodeB
ADD IKEPEER DSP IKEPEER LST IKEPEER MOD IKEPEER RMV IKEPEER
IKEPEER
PROPID
IKE Proposal ID
eNodeB
ADD IKEPEER MOD IKEPEER DSP IKEPEER LST IKEPEER
IKEPEER
IKEVERSION
Version
eNodeB
IKEPEER
EXCHMODE
Exchange Mode
eNodeB
IKEPEER
IDTYPE
Local ID Type
eNodeB
IKEPEER
REMOTEIP
Remote IP Address eNodeB
IKEPEER
REMOTENAME
Remote Name
eNodeB
IKEPEER
PKEY
Pre-shared Key
eNodeB
IKEPEER
DPD
DPD Mode
eNodeB
IKEPEER
DPDIDLETIME
DPD Idle Time
eNodeB
IKEPEER
DPDRETRI
eNodeB
IKEPEER
DPDRETRN
eNodeB
IKEPEER
LOCALIP
Local IP Address
eNodeB
IKEPEER
CabinetNo
Cabinet No.
eNodeB
DSP IKEPEER
IKEPEER
SubrackNo
Subrack No.
eNodeB
DSP IKEPEER
IKEPEER
SlotNo
Slot No.
eNodeB
DSP IKEPEER
IKEPEER6
PEERNAME
IPv6 IKE Peer Name
eNodeB
ADD IKEPEER6 DSP IKEPEER6 LST IKEPEER6 MOD IKEPEER6 RMV IKEPEER6
IKEPEER6
PROPID
IKE Proposal ID
eNodeB
ADD IKEPEER6 MOD IKEPEER6 DSP IKEPEER6 LST IKEPEER6
IKEPEER6
IKEVERSION
Version
eNodeB
IKEPEER6
EXCHMODE
Exchange Mode
eNodeB
IKEPEER6
IDTYPE
Local ID Type
eNodeB
IKEPEER6
REMOTEIP
Remote IPv6 Address
eNodeB
IKEPEER6
REMOTENAME
Remote Name
eNodeB
IKEPEER6
PKEY
Pre-shared Key
eNodeB
IKEPEER6
DPD
DPD Mode
eNodeB
IKEPEER6
DPDIDLETIME
DPD Idle Time
eNodeB
IKEPEER6
DPDRETRI
eNodeB
IKEPEER6
DPDRETRN
eNodeB
IKEPEER6
LOCALIP
Local IPv6 Address eNodeB
IKEPEER6
CabinetNo
Cabinet No.
eNodeB
DSP IKEPEER6
IKEPEER6
SubrackNo
Subrack No.
eNodeB
DSP IKEPEER6
IKEPEER6
SlotNo
Slot No.
eNodeB
DSP IKEPEER6
IKEPROPOSAL
PROPID
Proposal ID
eNodeB
ADD IKEPROPOSAL DSP IKEPROPOSAL LST IKEPROPOSAL MOD IKEPROPOSAL RMV IKEPROPOSAL
IKEPROPOSAL
ENCALG
Encryption Algorithm
eNodeB
ADD IKEPROPOSAL MOD IKEPROPOSAL DSP IKEPROPOSAL LST IKEPROPOSAL
IKEPROPOSAL
AUTHALG
Authentication Algorithm
eNodeB
IKEPROPOSAL
AUTHMETH
Authentication Method
eNodeB
IKEPROPOSAL
DHGRP
Diffie-Hellman Group
eNodeB
IKEPROPOSAL
DURATION
ISAKMP SA Duration
eNodeB
IKEPROPOSAL
PRFALG
PRF Algorithm
eNodeB
IKEPROPOSAL
CabinetNo
Cabinet No.
eNodeB
DSP IKEPROPOSAL
IKEPROPOSAL
SubrackNo
Subrack No.
eNodeB
DSP IKEPROPOSAL
IKEPROPOSAL
SlotNo
Slot No.
eNodeB
DSP IKEPROPOSAL
IP2RSCGRP
CN
Cabinet No.
eNodeB
ADD IP2RSCGRP RMV IP2RSCGRP LST IP2RSCGRP
IP2RSCGRP
SRN
Subrack No.
eNodeB
IP2RSCGRP
SN
Slot No.
eNodeB
IP2RSCGRP
RSCGRPID
IP2RSCGRP
DSTIP
Destination IP
eNodeB
IP2RSCGRP
DSTMASK
Mask
eNodeB
IP2RSCGRP
BEAR
eNodeB
IP2RSCGRP
SBT
Subboard Type
eNodeB
IP2RSCGRP
PT
Bearing Port Type
eNodeB
IP2RSCGRP
PN
Bearing Port No.
eNodeB
IPGUARD
ARPSPOOFCHKS W
ARP Spoofing Check Switch
eNodeB
SET IPGUARD LST IPGUARD
IPGUARD
ARPSPOOFALMTH ARP Spoofing D Alarm Threshold
eNodeB
IPGUARD
ARPLRNSTRICTS W
ARP Learning Strict eNodeB Switch
IPGUARD
INVALIDPKTCHKS Invalid Packet W Check Switch
eNodeB
IPGUARD
INVALIDPKTALMT Alarm Threshold HD
eNodeB
IPGUARD
IPSECREPLAYCH IPSec Replay Alarm eNodeB KSW Switch
IPGUARD
IPSECREPLAYAL MTHD
IPSec Replay Alarm eNodeB Threshold
IPGUARD
PT
Port Type
eNodeB
DSP INVALIDPKTINFO
IPGUARD IPGUARD
PN SrcMacAddr
Port No. Source MAC Address of Invalid Packet Destination MAC Address of Invalid Packet VLAN ID of Invalid Packet
eNodeB eNodeB
DSP INVALIDPKTINFO DSP INVALIDPKTINFO DSP INVALIDPKTINFO DSP INVALIDPKTINFO
IPGUARD
DstMacAddr
eNodeB
IPGUARD
VlanID
eNodeB
IPGUARD
MacLayerProtocol
Protocol Type of MAC Layer
eNodeB
DSP INVALIDPKTINFO
IPGUARD
SrcIP
Source IP Address of Invalid Packet Destination IP Address of Invalid Packet
eNodeB
DSP INVALIDPKTINFO DSP INVALIDPKTINFO
IPGUARD
DstIP
eNodeB
IPGUARD
IPLayerProtocol
Protocol Type of IP eNodeB Layer
DSP INVALIDPKTINFO
IPGUARD
SrcPort
Source Port of Invalid Packet Destination Port of Invalid Packet
eNodeB
DSP INVALIDPKTINFO DSP INVALIDPKTINFO DSP INVALIDPKTINFO ADD IPITF6 DSP IPITF6 RMV IPITF6 LST IPITF6 ADD IPITF6 DSP IPITF6 LST IPITF6
IPGUARD
DstPort
eNodeB
IPGUARD
PacketData
Invalid Packet Data eNodeB
IPITF6
ITFIDX
Interface Index
eNodeB
IPITF6
ITFTYPE
Interface Type
eNodeB
IPITF6
CN
Cabinet No.
eNodeB
ADD IPITF6 DSP IPITF6 LST IPITF6
IPITF6
SRN
Subrack No.
eNodeB
ADD IPITF6 DSP IPITF6 LST IPITF6 ADD IPITF6 DSP IPITF6 LST IPITF6 ADD IPITF6 DSP IPITF6 LST IPITF6
IPITF6
SN
Slot No.
eNodeB
IPITF6
SBT
Subboard Type
eNodeB
IPITF6
PT
Port Type
eNodeB
IPITF6
PN
Port No.
eNodeB
IPITF6
VLANID
VLAN ID
eNodeB
ADD IPITF6 DSP IPITF6 LST IPITF6 ADD IPITF6 DSP IPITF6 LST IPITF6 DSP IPITF6
IPITF6
MTU
Maximum Transmission Unit
eNodeB
IPITF6
ItfStatus
Interface Status
eNodeB
IPITF6
LinkLocalAddr
Link Local Address eNodeB
DSP IPITF6
IPITF6
GlobalAddrNum
Global Unicast Address Number
eNodeB
DSP IPITF6
IPITF6
GlobalAddr
Global Unicast Address(es)
eNodeB
DSP IPITF6
IPITF6
MulticastAddrNum
Multicast Address Number
eNodeB
DSP IPITF6
IPITF6
MulticastAddr
Multicast Address(es)
eNodeB
DSP IPITF6
IPITF6
NDAddrConfictChe ND DAD ck
eNodeB
DSP IPITF6
IPITF6
NDAttempts
ND DAD Attempts Number
eNodeB
DSP IPITF6
IPITF6
NDReachableTime ND Reachable Time eNodeB
DSP IPITF6
IPITF6
NDRetransInterval
ND Retransmit Interval
eNodeB
DSP IPITF6
IPITF6
LinkLocalAddrAuto Link Local Address eNodeB Config Autoconfig
DSP IPITF6
IPITF6
StatelessAutoConfi Stateless g Autoconfig
eNodeB
DSP IPITF6 ADD IPPATH DSP IPPATH LST IPPATH MOD IPPATH RMV IPPATH ADD IPPATH MOD IPPATH LST IPPATH ADD IPPATH MOD IPPATH LST IPPATH
IPPATH
PATHID
IP Path ID
eNodeB
IPPATH
CN
Cabinet No.
eNodeB
IPPATH
SRN
Subrack No.
eNodeB
IPPATH
SN
Slot No.
eNodeB
ADD IPPATH MOD IPPATH LST IPPATH
IPPATH
PT
Port Type
eNodeB
IPPATH
PN
Port No.
eNodeB
IPPATH
PATHTYPE
Path Type
eNodeB
ADD IPPATH LST IPPATH
IPPATH
DSCP
DSCP
eNodeB
ADD IPPATH LST IPPATH
IPPATH
LOCALIP
Local IP
eNodeB
IPPATH
PEERIP
Peer IP
eNodeB
IPPATH
ANI
Adjacent Node ID
eNodeB
IPPATH
QT
Transport Resource eNodeB Type
ADD IPPATH MOD IPPATH DSP IPPATH LST IPPATH
IPPATH
APPTYPE
Application Type
eNodeB
IPPATH
PATHCHK
Path Check
eNodeB
IPPATH
RealtimeTxBandwid Realtime TX th Bandwidth
eNodeB
DSP IPPATH
IPPATH
RealtimeRxBandwid Realtime RX th Bandwidth
eNodeB
DSP IPPATH
IPPATH
NonRealtimeTxBan Non-Realtime TX dwidth Bandwidth
eNodeB
DSP IPPATH
IPPATH
NonRealtimeRxBan Non-Realtime RX dwidth Bandwidth
eNodeB
DSP IPPATH
IPPATH
Non-Realtime NonRealtimeReserv Reserved TX edTxBandwidth Bandwidth
eNodeB
DSP IPPATH
IPPATH
Non-Realtime NonRealtimeReserv Reserved RX edRxBandwidth Bandwidth
eNodeB
DSP IPPATH
IPPATH
IppathCheckResult
IP Path Check Result
eNodeB
DSP IPPATH
IPPATH
RSCGRPID
ADD IPPATH MOD IPPATH LST IPPATH ADD IPPATH MOD IPPATH LST IPPATH
IPPATH
DESCRI
Description Info
eNodeB
IPPATH
SBT
Subboard Type
eNodeB
IPPATH
JNRSCGRP
Join Transmission Resource Group
eNodeB
IPPATH6
PATHID
IPv6 Path ID
eNodeB
ADD IPPATH6 DSP IPPATH6 MOD IPPATH6 RMV IPPATH6 LST IPPATH6 ADD IPPATH6 LST IPPATH6
IPPATH6
JNRSCGRP
Join Transmission Resource Group
eNodeB
IPPATH6
RSCGRPID
ADD IPPATH6 LST IPPATH6
IPPATH6
ITFIDX
Interface Index
eNodeB
IPPATH6
PATHTYPE
Path Type
eNodeB
IPPATH6
DSCP
DSCP
eNodeB
IPPATH6
LOCALIP6
IPPATH6
PEERIP6
Peer IPv6 Address
eNodeB
IPPATH6
ANI
Adjacent Node ID
eNodeB
ADD IPPATH6 MOD IPPATH6 LST IPPATH6
IPPATH6
APPTYPE
Application Type
eNodeB
IPPATH6
PATHCHK
Path Check
eNodeB
IPPATH6
RealtimeTxBandwid Realtime TX th Bandwidth
eNodeB
DSP IPPATH6
IPPATH6
RealtimeRxBandwid Realtime RX th Bandwidth
eNodeB
DSP IPPATH6
IPPATH6
NonRealtimeTxBan Non-Realtime TX dwidth Bandwidth
eNodeB
DSP IPPATH6
IPPATH6
NonRealtimeRxBan Non-Realtime RX dwidth Bandwidth
eNodeB
DSP IPPATH6
IPPATH6
Non-Realtime NonRealtimeReserv Reserved TX edTxBandwidth Bandwidth
eNodeB
DSP IPPATH6
IPPATH6
Non-Realtime NonRealtimeReserv Reserved RX edRxBandwidth Bandwidth
eNodeB
DSP IPPATH6
IPPATH6
IppathCheckResult
IPv6 Path Check Result
eNodeB
DSP IPPATH6
IPPATH6
DESCRI
Description Info
eNodeB
IPPATHRT
SRCIP
Source IP
eNodeB
ADD IPPATHRT DSP IPPATHRT RMV IPPATHRT LST IPPATHRT
IPPATHRT
DSTIP
Destination IP
eNodeB
ADD IPPATHRT DSP IPPATHRT RMV IPPATHRT LST IPPATHRT
IPPATHRT
TRANRSCTYPE
Transport Resource eNodeB Type
ADD IPPATHRT DSP IPPATHRT LST IPPATHRT
IPPATHRT
NEXTHOPIP
Next Hop IP
eNodeB
ADD IPPATHRT DSP IPPATHRT LST IPPATHRT
IPPMSESSION
IPPMSN
IP PM Session ID
eNodeB
ADD IPPMSESSION DSP IPPMSESSION RMV IPPMSESSION LST IPPMSESSION
IPPMSESSION
LOCALIP
Local IP
eNodeB
ADD IPPMSESSION DSP IPPMSESSION LST IPPMSESSION
IPPMSESSION
PEERIP
Peer IP
eNodeB
IPPMSESSION
IPPMDSCP
DSCP
eNodeB
IPPMSESSION
DIR
Activate Direction
eNodeB
IPPMSESSION
TimeDelay
Round Trip Time
eNodeB
DSP IPPMSESSION
IPPMSESSION
RxJitter
RX Jitter
eNodeB
DSP IPPMSESSION
IPPMSESSION
TxJitter
TX Jitter
eNodeB
DSP IPPMSESSION
IPPMSESSION
RxLossRate
RX Loss Rate
eNodeB
DSP IPPMSESSION
IPPMSESSION
TxLossRate
TX Loss Rate
eNodeB
DSP IPPMSESSION
IPPMSESSION
IppmUpActState
Activate State(Up)
eNodeB
DSP IPPMSESSION
IPPMSESSION
IppmDownActState
Activate State(Down)
eNodeB
DSP IPPMSESSION
IPPMSESSION
IPPMTYPE
IP PM Type
eNodeB
IPPMSESSION
BINDPATH
Bind IP Path
eNodeB
IPPMSESSION
PATHID
IP Path ID
eNodeB
ADD IPPMSESSION DSP IPPMSESSION LST IPPMSESSION DSP IPPMSESSION DSP IPPMSESSION DSP IPPMSESSION
IPPMSESSION
DLDscpChangeFlag
DSCP Change Flag(Down) DSCP Initial Value(Down) DSCP Changed Value(Down)
eNodeB
IPPMSESSION
DLPreDscp
eNodeB
IPPMSESSION
DLModiDscp
eNodeB
IPPMSESSION
DSCP Changed DLDscpChangeDat Date And eTime Time(Down) DSCP Change Flag(Up)
eNodeB
DSP IPPMSESSION
IPPMSESSION
ULDscpChangeFlag
eNodeB
DSP IPPMSESSION
IPPMSESSION
ULPreDscp
DSCP Initial Value(Up) DSCP Changed Value(Up)
eNodeB
DSP IPPMSESSION DSP IPPMSESSION
IPPMSESSION
ULModiDscp
eNodeB
IPPMSESSION
ULDscpChangeDat DSCP Changed eNodeB eTime Date And Time(Up)
DSP IPPMSESSION
IPPMSESSION
VER
IP PM Protocol Version
eNodeB
DSP IPPMSESSION
IPRT
CN
Cabinet No.
eNodeB
ADD IPRT DSP IPRT MOD IPRT RMV IPRT LST IPRT ADD IPRT DSP IPRT MOD IPRT RMV IPRT LST IPRT ADD IPRT DSP IPRT MOD IPRT RMV IPRT LST IPRT
IPRT
SRN
Subrack No.
eNodeB
IPRT
SN
Slot No.
eNodeB
IPRT
SBT
Subboard Type
eNodeB
ADD IPRT MOD IPRT RMV IPRT LST IPRT
IPRT
IFT
Port Type
eNodeB
IPRT
IFNO
Port No.
eNodeB
IPRT
RTTYPE
Route Type
eNodeB
ADD IPRT MOD IPRT RMV IPRT DSP IPRT LST IPRT
IPRT
DSTIP
Destination IP
eNodeB
IPRT
DSTMASK
Mask
eNodeB
IPRT
NEXTHOP
Next Hop IP
eNodeB
IPRT
PREF
Preference
eNodeB
ADD IPRT MOD IPRT DSP IPRT LST IPRT
IPRT
RTRouteType
Protocol
eNodeB
DSP IPRT
IPRT
DESCRI
Description Info
eNodeB
ADD IPRT MOD IPRT LST IPRT
IPRT
ActualPortType
Actual Port Type
eNodeB
DSP IPRT
IPRT
ActualPortNo
Actual Port No.
eNodeB
DSP IPRT
IPRT6
DSTIP
Destination IPv6 Address
eNodeB
ADD IPRT6 MOD IPRT6 RMV IPRT6 DSP IPRT6 LST IPRT6
IPRT6
PFXLEN
Prefix Length
eNodeB
IPRT6
RTTYPE
Route Type
eNodeB
IPRT6
NEXTHOPIP6TYPE Next Hop IPv6 Type eNodeB
ADD IPRT6 MOD IPRT6 RMV IPRT6 LST IPRT6
IPRT6
NEXTHOPIP
Next Hop IPv6 Address
eNodeB
ADD IPRT6 MOD IPRT6 RMV IPRT6 DSP IPRT6 LST IPRT6 ADD IPRT6 MOD IPRT6 RMV IPRT6 DSP IPRT6 LST IPRT6 ADD IPRT6 MOD IPRT6 DSP IPRT6 LST IPRT6
IPRT6
ITFIDX
Interface Index
eNodeB
IPRT6
PREF
Preference
eNodeB
IPRT6
RTRouteType
Protocol
eNodeB
DSP IPRT6
IPRT6
DESCRI
Description Info
eNodeB
ADD IPRT6 MOD IPRT6 LST IPRT6 ADD IPSECBIND RMV IPSECBIND LST IPSECBIND
IPSECBIND
CN
Cabinet No.
eNodeB
IPSECBIND
SRN
Subrack No.
eNodeB
ADD IPSECBIND RMV IPSECBIND LST IPSECBIND
IPSECBIND
SN
Slot No.
eNodeB
IPSECBIND
SBT
Subboard Type
eNodeB
IPSECBIND
PT
Port Type
eNodeB
IPSECBIND
PN
Port No.
eNodeB
IPSECBIND
SPGN
Policy Group Name eNodeB
ADD IPSECBIND LST IPSECBIND ADD IPSECBIND6 RMV IPSECBIND6 LST IPSECBIND6
IPSECBIND6
ITFIDX
Interface Index
eNodeB
IPSECBIND6
SPGN6
IPv6 IPSec Policy Group Name
eNodeB
ADD IPSECBIND6 LST IPSECBIND6
IPSECDTNL
DUALID
IPSec Dual Tunnel ID
eNodeB
ADD IPSECDTNL DSP IPSECDTNL LST IPSECDTNL MOD IPSECDTNL RMV IPSECDTNL
IPSECDTNL
MSPGN
Master Policy Group Name
eNodeB
ADD IPSECDTNL MOD IPSECDTNL DSP IPSECDTNL LST IPSECDTNL
IPSECDTNL
MSPSN
Master IPSec Sequence No.
eNodeB
IPSECDTNL
SSPGN
Slave Policy Group eNodeB Name
IPSECDTNL
SSPSN
Slave IPSec Sequence No.
eNodeB
IPSECDTNL
MBFDSN
Master Tunnel's BFD Session ID
eNodeB
IPSECDTNL
SBFDSN
Slave Tunnel's BFD eNodeB Session ID
IPSECDTNL
CurrentUsedTunnel
Current Used IPSec eNodeB Policy
DSP IPSECDTNL
IPSECPOLICY
SPGN
Policy Group Name eNodeB
ADD IPSECPOLICY DSP IPSECPOLICY LST IPSECPOLICY MOD IPSECPOLICY RMV IPSECPOLICY ADD IPSECPOLICY DSP IPSECPOLICY LST IPSECPOLICY MOD IPSECPOLICY RMV ADD IPSECPOLICY MOD IPSECPOLICY DSP IPSECPOLICY ADD IPSECPOLICY MOD IPSECPOLICY DSP IPSECPOLICY ADD IPSECPOLICY MOD IPSECPOLICY DSP IPSECPOLICY
IPSECPOLICY
SPSN
IPSec Sequence No.
eNodeB
IPSECPOLICY
ACLID
ACL ID
eNodeB
IPSECPOLICY
PROPNAME
IPSec Proposal Name
eNodeB
IPSECPOLICY
PEERNAME
IKE Peer Name
eNodeB
IPSECPOLICY
PFS
eNodeB
ADD IPSECPOLICY MOD IPSECPOLICY DSP IPSECPOLICY LST IPSECPOLICY
IPSECPOLICY
LTCFG
SA Duration Mode
eNodeB
IPSECPOLICY
LTS
eNodeB
IPSECPOLICY
LTKB
eNodeB
ADD IPSECPOLICY MOD IPSECPOLICY DSP IPSECPOLICY LST IPSECPOLICY DSP IPSECPOLICY
IPSECPOLICY
CabinetNo
Cabinet No.
eNodeB
IPSECPOLICY
SubrackNo
Subrack No.
eNodeB
DSP IPSECPOLICY
IPSECPOLICY
SlotNo
Slot No.
eNodeB
DSP IPSECPOLICY
IPSECPOLICY
REPLAYWND
Anti-Replay Window eNodeB Size
IPSECPOLICY6
SPGN
IPv6 Policy Group Name
eNodeB
ADD IPSECPOLICY6 DSP IPSECPOLICY6 LST IPSECPOLICY6 MOD IPSECPOLICY6 RMV IPSECPOLICY6 ADD IPSECPOLICY6 DSP IPSECPOLICY6 LST IPSECPOLICY6 MOD IPSECPOLICY6 RMV IPSECPOLICY6
IPSECPOLICY6
SPSN
IPv6 IPSec Sequence No.
eNodeB
IPSECPOLICY6
ACLTYPE
ACL Type
eNodeB
ADD IPSECPOLICY6 MOD IPSECPOLICY6 DSP IPSECPOLICY6 LST IPSECPOLICY6 ADD IPSECPOLICY6 MOD IPSECPOLICY6 DSP IPSECPOLICY6 LST IPSECPOLICY6 ADD IPSECPOLICY6 MOD IPSECPOLICY6 DSP IPSECPOLICY6 LST IPSECPOLICY6 ADD IPSECPOLICY6 MOD IPSECPOLICY6 DSP IPSECPOLICY6 LST IPSECPOLICY6 ADD IPSECPOLICY6 MOD IPSECPOLICY6 DSP IPSECPOLICY6 LST IPSECPOLICY6
IPSECPOLICY6
ACLID
IPv4 ACL ID
eNodeB
IPSECPOLICY6
ACL6ID
IPv6 ACL ID
eNodeB
IPSECPOLICY6
PROPNAME
IPSec Proposal Name
eNodeB
IPSECPOLICY6
PEER6NAME
IPv6 IKE Peer Name
eNodeB
IPSECPOLICY6
PFS
eNodeB
ADD IPSECPOLICY6 MOD IPSECPOLICY6 DSP IPSECPOLICY6 LST IPSECPOLICY6
IPSECPOLICY6
LTCFG
IPv6 SA Duration Mode
eNodeB
IPSECPOLICY6
LTS
eNodeB
IPSECPOLICY6
LTKB
eNodeB
IPSECPOLICY6
CabinetNo
Cabinet No.
eNodeB
DSP IPSECPOLICY6
IPSECPOLICY6
SubrackNo
Subrack No.
eNodeB
DSP IPSECPOLICY6
IPSECPOLICY6
SlotNo
Slot No.
eNodeB
DSP IPSECPOLICY6 ADD IPSECPROPOSAL DSP IPSECPROPOSAL LST IPSECPROPOSAL MOD IPSECPROPOSAL RMV IPSECPROPOSAL
IPSECPROPOSAL PROPNAME
IPSec Proposal Name
eNodeB
IPSECPROPOSAL ENCAPMODE
Encapsulation Mode
eNodeB
ADD IPSECPROPOSAL MOD IPSECPROPOSAL DSP IPSECPROPOSAL LST IPSECPROPOSAL
IPSECPROPOSAL TRANMODE
Transform
eNodeB
IPSECPROPOSAL AHAUTHALG
AH Authentication Algorithm
eNodeB
IPSECPROPOSAL ESPAUTHALG
ESP Authentication eNodeB Algorithm
IPSECPROPOSAL ESPENCALG
ESP Encryption Algorithm
eNodeB
IPSECPROPOSAL CabinetNo
Cabinet No.
eNodeB
DSP IPSECPROPOSAL
IPSECPROPOSAL SubrackNo
Subrack No.
eNodeB
DSP IPSECPROPOSAL
IPSECPROPOSAL SlotNo
Slot No.
eNodeB
DSP IPSECPROPOSAL
LOCALETHPORT
ConfigStatus
Config Status
eNodeB
DSP LOCALETHPORT
LOCALETHPORT
PortStatus
Port Status
eNodeB
DSP LOCALETHPORT
LOCALETHPORT
RxDropped
Number of RX Discarded Packets
eNodeB
DSP LOCALETHPORT
LOCALETHPORT
RxPackets
eNodeB
DSP LOCALETHPORT
LOCALETHPORT
TxDropped
Number of TX Discarded Packets
eNodeB
DSP LOCALETHPORT
LOCALETHPORT
TxPackets
eNodeB
DSP LOCALETHPORT
LOCALIP
IP
IP Address
eNodeB
SET LOCALIP DSP LOCALIP LST LOCALIP
LOCALIP
MASK
Mask
eNodeB
SET LOCALIP DSP LOCALIP LST LOCALIP
LOCALIP6
IP6
IPv6 Address
eNodeB
SET LOCALIP6 DSP LOCALIP6 LST LOCALIP6
LOCALIP6
PFXLEN
Prefix Length
eNodeB
SET LOCALIP6 DSP LOCALIP6 LST LOCALIP6
LOCALIP6
AddressStatus
Address Status
eNodeB
DSP LOCALIP6
LOCALIP6
ValidLifetime
Valid Lifetime
eNodeB
DSP LOCALIP6
LOCALIP6
PreferredLifetime
Preferred Lifetime
eNodeB
DSP LOCALIP6
LR
CN
Cabinet No.
eNodeB
SET LR LST LR
LR
SRN
Subrack No.
eNodeB
SET LR LST LR
LR
SN
Slot No.
eNodeB
SET LR LST LR
LR
PT
Port Type
eNodeB
SET LR LST LR
LR
PN
Port No.
eNodeB
SET LR LST LR
LR
LRSW
LR Switch
eNodeB
SET LR LST LR
LR
CIR
UL Committed Information Rate
eNodeB
SET LR LST LR
LR
CBS
Committed Burst Size
eNodeB
SET LR LST LR
LR
EBS
Excess Burst Size
eNodeB
SET LR LST LR
LR
SBT
Subboard Type
eNodeB
SET LR LST LR
LR
DLCIR
DL Committed Information Rate
eNodeB
SET LR LST LR
MPGRP
CN
Cabinet No.
eNodeB
ADD MPGRP DSP MPGRP RMV MPGRP RST MPGRP LST MPGRP ADD MPGRP DSP MPGRP RMV MPGRP RST MPGRP LST MPGRP ADD MPGRP DSP MPGRP RMV MPGRP RST MPGRP LST MPGRP ADD MPGRP DSP MPGRP RMV MPGRP RST MPGRP DSP DHCPRSLT LST MPGRP
MPGRP
SRN
Subrack No.
eNodeB
MPGRP
SN
Slot No.
eNodeB
MPGRP
MPGRPN
MLPPP Group No.
eNodeB
MPGRP
MCPPP
Multi-Class PPP
eNodeB
ADD MPGRP DSP MPGRP LST MPGRP
MPGRP
AUTH
Authentication Type eNodeB
ADD MPGRP LST MPGRP
MPGRP
UN
User Name
eNodeB
ADD MPGRP LST MPGRP
MPGRP
PWD
Password
eNodeB
ADD MPGRP LST MPGRP
MPGRP
LOCALIP
Local IP
eNodeB
MPGRP
IPMASK
Mask
eNodeB
MPGRP
PEERIP
Peer IP
eNodeB
MPGRP
MHO
MP/MC Header Option
eNodeB
ADD MPGRP LST MPGRP
MPGRP
MUXCP
PPPMUX
eNodeB
MPGRP
FRAGSIZE
MLPPP Fragment Size
eNodeB
ADD MPGRP LST MPGRP
MPGRP
MAXSFLEN
PPP Mux Subframe eNodeB Max Length
ADD MPGRP LST MPGRP
MPGRP
MAXMFLEN
PPP Muxframe Max eNodeB Length
ADD MPGRP LST MPGRP
MPGRP
MUXTIME
PPPMUX Combine eNodeB Timeout
ADD MPGRP LST MPGRP
MPGRP
MCCLASS
MCPPP Class
eNodeB
ADD MPGRP LST MPGRP
MPGRP
IPHC
IP Header Compression
eNodeB
MPGRP
MPDAAT
MLPPP Packets Discard Alarm Appear Threshold
eNodeB
ADD MPGRP LST MPGRP
MPGRP
MPDADT
MLPPP Packets Discard Alarm Disappear Threshold
eNodeB
ADD MPGRP LST MPGRP
MPGRP
MPGroupStatus
MLPPP Group Status
eNodeB
DSP MPGRP
MPGRP
IPCPSTATUS
IPCP Status
eNodeB
DSP MPGRP
MPGRP
PPPMUXSTATUS
PPPMUX Status
eNodeB
DSP MPGRP
MPGRP
LOCALIPNEGRLT
Local IP Negotiation eNodeB Result Local IP Mask Negotiation Result
DSP MPGRP
MPGRP
IPMASKNEGRLT
eNodeB
DSP MPGRP
MPGRP
PEERIPNEGRLT
Peer IP Negotiation eNodeB Result
DSP MPGRP
MPGRP
MCPPPNEGRLT
Multi-Class PPP Negotiation Result Maximum Receive Unit Negotiation Result PPPMUX Negotiation Result ACFC Negotiation Result
eNodeB
DSP MPGRP
MPGRP
MRUNEGRLT
eNodeB
DSP MPGRP
MPGRP
MUXNEGRLT
eNodeB
DSP MPGRP
MPGRP
ACFCNEGRLT
eNodeB
DSP MPGRP
MPGRP
PFCNEGRLT
PFC Negotiation Result IPHC Negotiation Result Number of RX Packets Number of TX Packets RX Flow TX Flow
eNodeB
DSP MPGRP
MPGRP
IPHCNEGRLT
eNodeB
DSP MPGRP
MPGRP
RXPKT
eNodeB
DSP MPGRP
MPGRP MPGRP MPGRP
TXPKT RXFLOW TXFLOW
DSP MPGRP DSP MPGRP DSP MPGRP
MPGRP
IPNum
Number of IPs
eNodeB
DSP MPGRP
MPGRP
IPList
IP Address List
eNodeB
DSP MPGRP
MPGRP
SBT
Subboard Type
eNodeB
ADD MPGRP DSP MPGRP RMV MPGRP RST MPGRP LST MPGRP
MPGRP
RXBYTE
Number of RX Bytes
eNodeB
DSP MPGRP
MPGRP
RXDROPPKT
Number of RX Drop eNodeB Packets Number of TX Bytes eNodeB
DSP MPGRP
MPGRP
TXBYTE
DSP MPGRP
MPGRP
TXDROPPKT
Number of TX Drop eNodeB Packets
DSP MPGRP
MPLNK
CN
Cabinet No.
eNodeB
ADD MPLNK DSP MPLNK RMV MPLNK LST MPLNK ADD MPLNK DSP MPLNK RMV MPLNK LST MPLNK ADD MPLNK DSP MPLNK RMV MPLNK LST MPLNK ADD MPLNK DSP MPLNK RMV MPLNK DSP DHCPRSLT LST MPLNK ADD MPLNK DSP MPLNK LST MPLNK
MPLNK
SRN
Subrack No.
eNodeB
MPLNK
SN
Slot No.
eNodeB
MPLNK
PPPLNKN
MLPPP Link No.
eNodeB
MPLNK
MPGRPN
MLPPP Group No.
eNodeB
MPLNK
E1T1SRN
E1/T1 Subrack No. eNodeB
ADD MPLNK LST MPLNK
MPLNK
E1T1SN
E1/T1 Slot No.
eNodeB
ADD MPLNK LST MPLNK
MPLNK
E1T1PN
E1/T1 Port No.
eNodeB
ADD MPLNK LST MPLNK
MPLNK
TSN
Timeslot No.
eNodeB
ADD MPLNK LST MPLNK
MPLNK
MRU
Maximum Receive Unit
eNodeB
ADD MPLNK DSP MPLNK LST MPLNK
MPLNK
PFC
Protocol Field Compression
eNodeB
MPLNK
ACFC
Address and Control Field Compression
eNodeB
MPLNK
RESTARTTMR
Negotiation Time
eNodeB
ADD MPLNK LST MPLNK
MPLNK
SBT
Subboard Type
eNodeB
ADD MPLNK DSP MPLNK RMV MPLNK LST MPLNK
MPLNK
MPGRPSBT
MLPPP Group Subboard Type
eNodeB
ADD MPLNK LST MPLNK
MPLNK
MPLNKSTATUS
MLPPP Link Status eNodeB
DSP MPLNK
MPLNK
LCPSTATUS
LCP Status
eNodeB
DSP MPLNK
MPLNK
MRUNEGRLT
Maximum Receive Unit Negotiation Result PFC Negotiation Result
eNodeB
DSP MPLNK
MPLNK
PFCNEGRLT
eNodeB
DSP MPLNK
MPLNK
ACFCNEGRLT
ACFC Negotiation Result
eNodeB
DSP MPLNK
MPLNK
E1T1SBT
E1/T1 Subboard Type
eNodeB
ADD MPLNK LST MPLNK
MPLNK
RXPKT
Number of RX Packets Number of RX Bytes
eNodeB
DSP MPLNK
MPLNK
RXBYTE
eNodeB
DSP MPLNK
MPLNK
RXDROPPKT
Number of RX Drop eNodeB Packets Number of TX Packets eNodeB
DSP MPLNK
MPLNK
TXPKT
DSP MPLNK
MPLNK
TXBYTE
DSP MPLNK
MPLNK
TXDROPPKT
DSP MPLNK ADD OMCH DSP OMCH MOD OMCH RMV OMCH LST OMCH
OMCH
FLAG
Master/Slave Flag
eNodeB
OMCH
IP
Local IP
eNodeB
ADD OMCH MOD OMCH DSP OMCH LST OMCH
OMCH
MASK
Local Mask
eNodeB
ADD OMCH MOD OMCH DSP DHCPRSLT DSP OMCH LST OMCH
OMCH
PEERIP
Peer IP
eNodeB
OMCH
PEERMASK
Peer Mask
eNodeB
OMCH
CN
Cabinet No.
eNodeB
OMCH
SRN
Subrack No.
eNodeB
ADD OMCH MOD OMCH DSP DHCPRSLT DSP OMCH LST OMCH ADD OMCH MOD OMCH DSP DHCPRSLT DSP OMCH LST OMCH ADD OMCH MOD OMCH DSP DHCPRSLT
OMCH
SN
Slot No.
eNodeB
OMCH
BEAR
Bearer Type
eNodeB
OMCH
BRT
Binding Route
eNodeB
OMCH
DSTIP
Destination IP
eNodeB
OMCH
DSTMASK
Destination Mask
eNodeB
OMCH
RT
Route Type
eNodeB
OMCH
IFT
Interface Type
eNodeB
OMCH
IFNO
Interface No.
eNodeB
OMCH
PREF
Preference
eNodeB
OMCH
NEXTHOP
Next Hop IP
eNodeB
OMCH
Status
OM Channel Status eNodeB
DSP OMCH
OMCH
UsedState
Used State
eNodeB
DSP OMCH
OMCH
SBT
Subboard Type
eNodeB
OMCH6
LOCALIP6
ADD OMCH6 MOD OMCH6 DSP OMCH6 LST OMCH6
OMCH6
PEERIP6
Peer IPv6 Address
eNodeB
ADD OMCH6 MOD OMCH6 DSP OMCH6 LST OMCH6
OMCH6
Status
OM Channel Status eNodeB
DSP OMCH6
PACKETFILTER
CN
Cabinet No.
eNodeB
ADD PACKETFILTER DSP PACKETFILTER RMV PACKETFILTER LST PACKETFILTER ADD PACKETFILTER DSP PACKETFILTER RMV PACKETFILTER LST PACKETFILTER
PACKETFILTER
SRN
Subrack No.
eNodeB
PACKETFILTER
SN
Slot No.
eNodeB
ADD PACKETFILTER DSP PACKETFILTER RMV PACKETFILTER LST PACKETFILTER ADD PACKETFILTER DSP PACKETFILTER RMV PACKETFILTER LST PACKETFILTER
PACKETFILTER
PT
Port Type
eNodeB
PACKETFILTER
PN
Port No.
eNodeB
ADD PACKETFILTER DSP PACKETFILTER RMV PACKETFILTER LST PACKETFILTER
PACKETFILTER
ACLID
Advanced ACL ID
eNodeB
ADD PACKETFILTER DSP PACKETFILTER LST PACKETFILTER
PACKETFILTER
MB
Match Behavior
eNodeB
PACKETFILTER
SBT
Subboard Type
eNodeB
ADD PACKETFILTER DSP PACKETFILTER RMV PACKETFILTER LST PACKETFILTER
PACKETFILTER
TxPackets
eNodeB
DSP PACKETFILTER
PACKETFILTER
RxPackets
eNodeB
DSP PACKETFILTER
PACKETFILTER
TxPermitPacket
Number of TX Permit Packets
eNodeB
DSP PACKETFILTER
PACKETFILTER
RxPermitPacket
Number of RX Permit Packets
eNodeB
DSP PACKETFILTER
PACKETFILTER
TxDenyPacket
Number of TX Deny eNodeB Packets
DSP PACKETFILTER
PACKETFILTER
RxDenyPacket
Number of RX Deny eNodeB Packets
DSP PACKETFILTER
PACKETFILTER
TxBytes
Bytes of TX Packets eNodeB
DSP PACKETFILTER
PACKETFILTER
RxBytes
Bytes of RX Packets
eNodeB
DSP PACKETFILTER
PACKETFILTER
TxPermitBytes
Bytes of TX Permit Packets
eNodeB
DSP PACKETFILTER
PACKETFILTER
RxPermitBytes
Bytes of RX Permit eNodeB Packets
DSP PACKETFILTER
PACKETFILTER
TxDenyBytes
Bytes of TX Deny Packets
eNodeB
DSP PACKETFILTER
PACKETFILTER
RxDenyBytes
Bytes of RX Deny Packets
eNodeB
DSP PACKETFILTER
PACKETFILTER
RxDefaultBytes
Bytes of RX Packets Matched Default Behavior
eNodeB
DSP PACKETFILTER
PACKETFILTER
RxDefaultPackets
Number of RX Packets Matched Default Behavior
eNodeB
DSP PACKETFILTER
PACKETFILTER
ACLID2
Layer 2 ACL ID
eNodeB
PACKETFILTER
FM
Filter Mode
eNodeB
PINGFILTER
IP
IP Address
eNodeB
ADD PINGFILTER RMV PINGFILTER LST PINGFILTER
PINGFILTER
MASK
Mask
eNodeB
ADD PINGFILTER RMV PINGFILTER LST PINGFILTER
PMTUCFG
MODE
Detection Mode
eNodeB
SET PMTUCFG LST PMTUCFG
PMTUCFG
UDPPORT
UDP Port No.
eNodeB
PMTUCFG
DETECTPERIOD
Detection Period
eNodeB
PMTUCFG
AGINGPERIOD
Aging Period
eNodeB
PMTUCFG
DSCP
DSCP
eNodeB
PORTSECURITY
CN
Cabinet No.
eNodeB
DSP PORTSECURITY SET PORTSECURITY LST PORTSECURITY DSP PORTSECURITY SET PORTSECURITY LST PORTSECURITY DSP PORTSECURITY SET PORTSECURITY LST PORTSECURITY
PORTSECURITY
SRN
Subrack No.
eNodeB
PORTSECURITY
SN
Slot No.
eNodeB
PORTSECURITY
SBT
Subboard Type
eNodeB
DSP PORTSECURITY SET PORTSECURITY LST PORTSECURITY
PORTSECURITY
PT
Port Type
eNodeB
PORTSECURITY
PN
Port No.
eNodeB
PORTSECURITY
SWITCH
Enable Flag
eNodeB
SET PORTSECURITY DSP PORTSECURITY LST PORTSECURITY
PPPLNK
CN
Cabinet No.
eNodeB
ADD PPPLNK DSP PPPLNK RMV PPPLNK RST PPPLNK LST PPPLNK
PPPLNK
SRN
Subrack No.
eNodeB
ADD PPPLNK DSP PPPLNK RMV PPPLNK RST PPPLNK LST PPPLNK ADD PPPLNK DSP PPPLNK RMV PPPLNK RST PPPLNK LST PPPLNK ADD PPPLNK DSP PPPLNK RMV PPPLNK RST PPPLNK DSP DHCPRSLT LST PPPLNK
PPPLNK
SN
Slot No.
eNodeB
PPPLNK
PPPLNKN
PPP Link No.
eNodeB
PPPLNK
PN
Port No.
eNodeB
ADD PPPLNK LST PPPLNK
PPPLNK
AUTH
Authentication Type eNodeB
PPPLNK
UN
User Name
eNodeB
PPPLNK
PWD
Password
eNodeB
PPPLNK
TSN
Time Slot No.
eNodeB
PPPLNK
LOCALIP
Local IP
eNodeB
ADD PPPLNK DSP PPPLNK LST PPPLNK
PPPLNK
IPMASK
Mask
eNodeB
PPPLNK
PEERIP
Peer IP
eNodeB
PPPLNK
MUXCP
PPPMUX
eNodeB
PPPLNK
MAXSFLEN
Maximum Length of eNodeB PPP Mux Subframe
PPPLNK
MAXMFLEN
Maximum Length of eNodeB PPP Muxframe
PPPLNK
MUXTIME
PPP Muxframe Combination Timeout
eNodeB
PPPLNK
IPHC
IP Header Compression
eNodeB
PPPLNK
MRU
Maximum Receive Unit
eNodeB
PPPLNK
PFC
Protocol Field Compression
eNodeB
PPPLNK
ACFC
Address and Control Field Compression
eNodeB
PPPLNK
RESTARTTMR
Negotiation Time
eNodeB
PPPLNK
PPPLinkStatus
Link Status
eNodeB
DSP PPPLNK
PPPLNK
LCPSTATUS
LCP Status
eNodeB
DSP PPPLNK
PPPLNK
IPCPSTATUS
IPCP Status
eNodeB
DSP PPPLNK
PPPLNK
PPPMUXSTATUS
PPPMUX Status
eNodeB
DSP PPPLNK
PPPLNK
LOCALIPNEGRLT
Local IP Negotiation eNodeB Result
DSP PPPLNK
PPPLNK
MASKNEGRLT
Local IP Mask Negotiation Result
eNodeB
DSP PPPLNK
PPPLNK
PEERIPNEGRLT
Peer IP Negotiation eNodeB Result
DSP PPPLNK
PPPLNK
IPHCNEGRLT
IPHC Negotiation Result
eNodeB
DSP PPPLNK
PPPLNK
ACFCNEGRLT
ACFC Negotiation Result
eNodeB
DSP PPPLNK
PPPLNK
PFCNEGRLT
PFC Negotiation Result
eNodeB
DSP PPPLNK
PPPLNK
MRUNEGRLT
Maximum Receive Unit Negotiation Result
eNodeB
DSP PPPLNK
PPPLNK
MUXNEGRLT
PPPMUX Negotiation Result
eNodeB
DSP PPPLNK
PPPLNK
RXPKT
eNodeB
DSP PPPLNK
PPPLNK
TXPKT
eNodeB
DSP PPPLNK
PPPLNK
RXFLOW
RX Flow
eNodeB
DSP PPPLNK
PPPLNK
TXFLOW
TX Flow
eNodeB
DSP PPPLNK
PPPLNK
IPNum
Number of IPs
eNodeB
DSP PPPLNK
PPPLNK
IPList
IP Address List
eNodeB
DSP PPPLNK
PPPLNK
FFAPHOLD
PPP Fault Frame Occurrence Threshold
eNodeB
PPPLNK
FFDPHOLD
PPP Fault Frame Clear Threshold
eNodeB
PPPLNK
SBT
Subboard Type
eNodeB
ADD PPPLNK DSP PPPLNK RMV PPPLNK RST PPPLNK LST PPPLNK
PPPLNK
RXBYTE
Number of RX Bytes
eNodeB
DSP PPPLNK
PPPLNK
RXDROPPKT
Number of RX Drop eNodeB Packets
DSP PPPLNK
PPPLNK
TXBYTE
DSP PPPLNK
PPPLNK
TXDROPPKT
DSP PPPLNK
PRI2QUE
PRI0
PriOfQue0
eNodeB
SET PRI2QUE LST PRI2QUE
PRI2QUE
PRI1
PriOfQue1
eNodeB
PRI2QUE
PRI2
PriOfQue2
eNodeB
PRI2QUE
PRI3
PriOfQue3
eNodeB
PRI2QUE
PRI4
PriOfQue4
eNodeB
PRI2QUE
PRI5
PriOfQue5
eNodeB
PRI2QUE
PRI6
PriOfQue6
eNodeB
RSCGRP
CN
Cabinet No.
eNodeB
ADD RSCGRP DSP RSCGRP MOD RSCGRP RMV RSCGRP LST RSCGRP
RSCGRP
SRN
Subrack No.
eNodeB
RSCGRP
SN
Slot No.
eNodeB
ADD RSCGRP DSP RSCGRP MOD RSCGRP RMV RSCGRP LST RSCGRP ADD RSCGRP DSP RSCGRP MOD RSCGRP RMV RSCGRP LST RSCGRP
RSCGRP
BEAR
eNodeB
RSCGRP
SBT
Subboard Type
eNodeB
RSCGRP
PT
Bearing Port Type
eNodeB
RSCGRP
PN
Bearing Port No.
eNodeB
RSCGRP
RSCGRPID
RSCGRP
RU
Rate Unit
eNodeB
ADD RSCGRP MOD RSCGRP DSP RSCGRP LST RSCGRP
RSCGRP
TXBW
Tx Bandwidth
eNodeB
RSCGRP
RXBW
Rx Bandwidth
eNodeB
RSCGRP
TXCBS
TX Committed Burst eNodeB Size
ADD RSCGRP MOD RSCGRP LST RSCGRP
RSCGRP
TXEBS
TX Excessive Burst eNodeB Size
RSCGRP
OID
Operator ID
eNodeB
ADD RSCGRP LST RSCGRP
RSCGRP
WEIGHT
Scheduling Weight eNodeB
RSCGRP
TXCIR
TX Committed Information Rate
eNodeB
RSCGRP
RXCIR
RX Committed Information Rate
eNodeB
RSCGRP
TXPIR
TX Peak Information Rate
eNodeB
RSCGRP
RXPIR
RX Peak Information Rate
eNodeB
RSCGRP
TXPBS
TX Peak Burst Size eNodeB
RSCGRP
TxRTBw
Realtime TX Bandwidth
eNodeB
DSP RSCGRP
RSCGRP
RxRTBw
Realtime RX Bandwidth
eNodeB
DSP RSCGRP
RSCGRP
TxNRTBw
Non-Realtime TX Bandwidth
eNodeB
DSP RSCGRP
RSCGRP
RxNRTBw
Non-Realtime RX Bandwidth
eNodeB
DSP RSCGRP
RSCGRP
TxNRTResvBw
Non-Realtime Reserved TX Bandwidth
eNodeB
DSP RSCGRP
RSCGRP
RxNRTResvBw
Non-Realtime Reserved RX Bandwidth
eNodeB
DSP RSCGRP
RSCGRP
TxGBRBwRlt
GBR Tx Bandwidth eNodeB
DSP RSCGRP
RSCGRP
RxGBRBwRlt
GBR Rx Bandwidth eNodeB
DSP RSCGRP
RSCGRP
RateCfgType
Rate Configuration Type
eNodeB
DSP RSCGRP
RSCGRP
ULAdminBw
UL Admission Bandwidth
eNodeB
DSP RSCGRP
RSCGRP
DLAdminBw
DL Admission Bandwidth
eNodeB
DSP RSCGRP
RSCGRP
ULCirAdminBw
UL CIR Admission Bandwidth
eNodeB
DSP RSCGRP
RSCGRP
DLCirAdminBw
DL CIR Admission Bandwidth
eNodeB
DSP RSCGRP
RSCGRP
ULPirAdminBw
UL PIR Admission Bandwidth
eNodeB
DSP RSCGRP
RSCGRP
DLPirAdminBw
DL PIR Admission Bandwidth
eNodeB
DSP RSCGRP
RSCGRP
TxLgcPortFlow
Realtime Tx Traffic eNodeB
DSP RSCGRP
RSCGRPALG
CN
Cabinet No.
eNodeB
SET RSCGRPALG LST RSCGRPALG
RSCGRPALG
SRN
Subrack No.
eNodeB
RSCGRPALG
SN
Slot No.
eNodeB
RSCGRPALG
SBT
Subboard Type
eNodeB
RSCGRPALG
PT
Bearing Port Type
eNodeB
RSCGRPALG
PN
Bearing Port No.
eNodeB
RSCGRPALG
RSCGRPID
RSCGRPALG
TXSSW
TX Traffic Shaping Switch
eNodeB
RSCGRPALG
TXBWASW
TX Bandwidth Adjustment Switch
eNodeB
RSCGRPALG
RXBWASW
RX Bandwidth Adjustment Switch
eNodeB
RSCGRPALG
PLRDTH
Packet Loss Ratio Down Threshold
eNodeB
RSCGRPALG
DDTH
Delay Variation Down Threshold
eNodeB
RSCGRPALG
TXBWAMIN
TX Bandwidth Adjust Minimum
eNodeB
RSCGRPALG
RXBWAMIN
RX Bandwidth Adjust Minimum
eNodeB
RSCGRPALG
TCSW
Traffic Control Switch
eNodeB
RSCGRPALG
OMTCSW
OM FTP Traffic Control Switch
eNodeB
RSCGRPALG
PQN
PQ Number
eNodeB
RSCGRPALG
CTTH
Congestion Time Threshold
eNodeB
RSCGRPALG
CCTTH
Congestion Clear Time Threshold
eNodeB
RSCGRPALG
TXRSVBW
TX Reserved Bandwidth
eNodeB
RSCGRPALG
RXRSVBW
RX Reserved Bandwidth
eNodeB
RSCGRPALG
DROPPKTNUM
Drop Packet Number Threshold
eNodeB
SCTPLNK
SCTPNO
SCTP Link No.
eNodeB
ADD SCTPLNK BLK SCTPLNK DSP SCTPLNK LST SCTPLNK MOD SCTPLNK RMV SCTPLNK RST SCTPLNK UBL SCTPLNK ADD SCTPLNK DSP SCTPLNK LST SCTPLNK ADD SCTPLNK DSP SCTPLNK LST SCTPLNK ADD SCTPLNK DSP SCTPLNK LST SCTPLNK ADD SCTPLNK MOD SCTPLNK LST SCTPLNK
SCTPLNK
CN
Cabinet No.
eNodeB
SCTPLNK
SRN
Subrack No.
eNodeB
SCTPLNK
SN
Slot No.
eNodeB
SCTPLNK
MAXSTREAM
Maximum Stream No.
eNodeB
SCTPLNK
LOCIP
First Local IP Address
eNodeB
ADD SCTPLNK MOD SCTPLNK DSP SCTPLNK LST SCTPLNK
SCTPLNK
SECLOCIP
Second Local IP Address
eNodeB
SCTPLNK
LOCPORT
Local SCTP Port No.
eNodeB
SCTPLNK
PEERIP
First Peer IP Address
eNodeB
SCTPLNK
SECPEERIP
Second Peer IP Address
eNodeB
SCTPLNK
PEERPORT
Peer SCTP Port No.
eNodeB
SCTPLNK
RTOMIN
RTO Min Value
eNodeB
ADD SCTPLNK MOD SCTPLNK LST SCTPLNK
SCTPLNK
RTOMAX
RTO Max Value
eNodeB
SCTPLNK
RTOINIT
RTO Initial Value
eNodeB
SCTPLNK
RTOALPHA
RTO Alpha Value
eNodeB
SCTPLNK
RTOBETA
RTO Beta Value
eNodeB
SCTPLNK
HBINTER
Heart-beat Interval
eNodeB
SCTPLNK
MAXASSOCRETR
eNodeB
SCTPLNK
MAXPATHRETR
eNodeB
SCTPLNK
CHKSUMTX
Send Message Checksum Flag
eNodeB
SCTPLNK
CHKSUMRX
eNodeB
SCTPLNK
CHKSUMTYPE
eNodeB
SCTPLNK
AUTOSWITCH
Switch Back Flag
eNodeB
SCTPLNK
eNodeB
SCTPLNK
AssocState
SCTP Link Status
eNodeB
DSP SCTPLNK
SCTPLNK
TransferCause
Status Change Cause
eNodeB
DSP SCTPLNK
SCTPLNK
TransferTime
Status Change Time
eNodeB
DSP SCTPLNK
SCTPLNK
OUTSTREAM
Out Stream Number eNodeB
DSP SCTPLNK
SCTPLNK
INSTREAM
In Stream Number
eNodeB
DSP SCTPLNK
SCTPLNK
WORKADDRFLAG Work Address Flag eNodeB
DSP SCTPLNK
SCTPLNK
BLKFLAG
Block Flag
eNodeB
DSP SCTPLNK LST SCTPLNK
SCTPLNK
TSACK
SACK Timeout
eNodeB
SCTPLNK
DESCRI
Description Info
eNodeB
ADD SCTPLNK MOD SCTPLNK LST SCTPLNK ADD SCTPLNK6 BLK SCTPLNK6 DSP SCTPLNK6 LST SCTPLNK6 MOD SCTPLNK6 RMV SCTPLNK6 RST SCTPLNK6 UBL SCTPLNK6 ADD SCTPLNK6 MOD SCTPLNK6 LST SCTPLNK6
SCTPLNK6
SCTPNO
IPv6 SCTP Link No. eNodeB
SCTPLNK6
MAXSTREAM
Maximum Stream No.
eNodeB
SCTPLNK6
LOCIP
First Local IPv6 Address
eNodeB
ADD SCTPLNK6 MOD SCTPLNK6 DSP SCTPLNK6 LST SCTPLNK6
SCTPLNK6
SECLOCIP
Second Local IPv6 Address
eNodeB
SCTPLNK6
LOCPORT
Local IPv6 SCTP Port No.
eNodeB
SCTPLNK6
PEERIP
First Peer IPv6 Address
eNodeB
SCTPLNK6
SECPEERIP
Second Peer IPv6 Address
eNodeB
SCTPLNK6
PEERPORT
Peer IPv6 SCTP Port No.
eNodeB
SCTPLNK6
RTOMIN
RTO Min Value
eNodeB
ADD SCTPLNK6 MOD SCTPLNK6 LST SCTPLNK6
SCTPLNK6
RTOMAX
RTO Max Value
eNodeB
SCTPLNK6
RTOINIT
RTO Initial Value
eNodeB
SCTPLNK6
RTOALPHA
RTO Alpha Value
eNodeB
SCTPLNK6
RTOBETA
RTO Beta Value
eNodeB
SCTPLNK6
HBINTER
Heart-beat Interval
eNodeB
SCTPLNK6
MAXASSOCRETR
eNodeB
SCTPLNK6
MAXPATHRETR
eNodeB
SCTPLNK6
CHKSUMTYPE
Checksum Algorithm Type
eNodeB
SCTPLNK6
eNodeB
SCTPLNK6
eNodeB
SCTPLNK6
AssocState
IPv6 SCTP Link Status
eNodeB
DSP SCTPLNK6
SCTPLNK6
TransferCause
Status Change Cause
eNodeB
DSP SCTPLNK6
SCTPLNK6
TransferTime
Status Change Time
eNodeB
DSP SCTPLNK6
SCTPLNK6
OUTSTREAM
Out Stream Number eNodeB
DSP SCTPLNK6
SCTPLNK6
INSTREAM
In Stream Number
eNodeB
DSP SCTPLNK6
SCTPLNK6
WORKADDRFLAG Work Address Flag eNodeB
DSP SCTPLNK6
SCTPLNK6
BLKFLAG
Block Flag
eNodeB
DSP SCTPLNK6 LST SCTPLNK6 ADD SCTPLNK6 MOD SCTPLNK6 LST SCTPLNK6 ADD SUBNETVLAN LST SUBNETVLAN MOD SUBNETVLAN RMV SUBNETVLAN ADD SUBNETVLAN LST SUBNETVLAN MOD SUBNETVLAN RMV SUBNETVLAN ADD SUBNETVLAN MOD SUBNETVLAN LST SUBNETVLAN
SCTPLNK6
DESCRI
Description Info
eNodeB
SUBNETVLAN
IP
IP Address
eNodeB
SUBNETVLAN
MASK
Mask
eNodeB
SUBNETVLAN
VLANID
VLAN ID
eNodeB
TACALG
RSCGRPULCACS WITCH
Resource Group Uplink Admission Control Algorithm Switch
eNodeB
SET TACALG LST TACALG
TACALG
RSCGRPDLCACS WITCH
Resource Group Downlink Admission eNodeB Control Algorithm Switch
TACALG
USERDATATYPE1 User Data Type 1 ACTFACTOR Act Factor
eNodeB
TACALG
eNodeB
TACALG
eNodeB
TACALG
eNodeB
TACALG
eNodeB
TACALG
eNodeB
TACALG
eNodeB
TACALG
eNodeB
TACALG
eNodeB
TACALG
Uplink Handover TRMULHOCACTH Service Admission Threshold
eNodeB
TACALG
Downlink Handover TRMDLHOCACTH Service Admission eNodeB Threshold
TACALG
Uplink Golden New TRMULGOLDCAC Service Admission eNodeB TH Threshold
TACALG
Downlink Golden TRMDLGOLDCAC New Service TH Admission Threshold
eNodeB
TACALG
Uplink Silver New TRMULSILVERCA Service Admission CTH Threshold
eNodeB
TACALG
Downlink Silver TRMDLSILVERCA New Service CTH Admission Threshold
eNodeB
TACALG
TRMULBRONZEC ACTH
Uplink Bronze New Service Admission eNodeB Threshold
TACALG
TRMDLBRONZEC ACTH
Downlink Bronze New Service Admission Threshold
eNodeB
TACALG
TRMULGBRCACT H
Uplink GBR Service Admission eNodeB Threshold
TACALG
TRMDLGBRCACT H
Downlink GBR Service Admission Threshold
eNodeB
TACALG
TRMULPRESW
Uplink Pre-emption eNodeB Algorithm Switch
TACALG
TRMDLPRESW
Downlink Preemption Algorithm Switch
eNodeB
TACALG
PORTULOBSW
Physical Port Up Link OverBooking Switch
eNodeB
TACALG
PORTDLOBSW
Physical Port Down Link OverBooking eNodeB Switch
TACALG
PORTULCACSW
Physical Port Up Link Admission Switch
eNodeB
TACALG
PORTDLCACSW
Physical Port Down Link Admission eNodeB Switch
TLDRALG
TRMULLDRTRGTH
Uplink High Load Trigger Threshold
eNodeB
SET TLDRALG LST TLDRALG
TLDRALG
TRMDLLDRTRGTH
Downlink High Load eNodeB Trigger Threshold
TLDRALG
TRMULLDRCLRTH
Uplink High Load Clear Threshold
eNodeB
TLDRALG
TRMDLLDRCLRTH
Downlink High Load eNodeB Clear Threshold
TLDRALG
TRMULMLDTRGT H
Uplink Medium Load Trigger Threshold
eNodeB
TLDRALG
TRMDLMLDTRGT H
Downlink Medium Load Trigger Threshold
eNodeB
TLDRALG
Uplink Medium TRMULMLDCLRTH Load Clear Threshold
eNodeB
TLDRALG
Downlink Medium TRMDLMLDCLRTH Load Clear Threshold
eNodeB
TLFRSWITCH
TLFRSWITCH
Transmission Link Fault Recover Switch
eNodeB
SET TLFRSWITCH LST TLFRSWITCH
TOLCALG
TRMULOLCSWITC Uplink OLC H Algorithm Switch
eNodeB
SET TOLCALG LST TOLCALG
TOLCALG
TRMDLOLCSWITC Downlink OLC H Algorithm Switch
eNodeB
TOLCALG
TRMULOLCTRIGT Uplink OLC Trigger eNodeB H Threshold
TOLCALG
TRMULOLCRELTH
Uplink OLC eNodeB Release Threshold
TOLCALG
TRMOLCRELBEAR OLC Release ERNUM Bearer No.
eNodeB
TOLCALG
TRMDLOLCTRIGT Downlink OLC H Trigger Threshold
eNodeB
TOLCALG
TRMDLOLCRELTH
Downlink OLC eNodeB Release Threshold
TRANSPORT
MODE
Ping Filter Mode
eNodeB
SET PINGFILTERMODE LST PINGFILTERMODE
TRANSPORT
BatchFailPkt
Number of Packets Discarded Due to eNodeB Fragmentation Failures Total Number of Encrypted Packets Received at the IP Layer of the Receiver
DSP IPSTAT
TRANSPORT
InEncryptedPkt
eNodeB
DSP IPSTAT
TRANSPORT
Number of Packets Successfully InDecryptSucceedP Decrypted at the IP eNodeB kt Layer of the Receiver Total Number of Packets Failed in InEspDecryptFailPk ESP Decryption at eNodeB t the IP Layer of the Receiver Hardware
DSP IPSTAT
TRANSPORT
DSP IPSTAT
TRANSPORT
InAhAuthFailPkt
Total Number of Packets Failed in AH Authentication at the IP Layer of the Receiver Hardware
eNodeB
DSP IPSTAT
TRANSPORT
Total Number of Packets Discarded InShouldNotEncrypt at the IP Layer of eNodeB edPkt the Receiver Due to Having Been Encrypted Total Number of Packets Received by the Decryption Module of the Receiver
DSP IPSTAT
TRANSPORT
InTotalPkt
eNodeB
DSP IPSTAT
TRANSPORT
InDecryptFailPkt
Number of Failing Decrypted Packets eNodeB at the Receiver Total Number of IKE Packets Received at the IP Layer of the Receiver
DSP IPSTAT
TRANSPORT
InIkePkt
eNodeB
DSP IPSTAT
TRANSPORT
Total Number of Packets Discarded InWrongSIPEncrypt at the IP Layer of eNodeB edPkt the Receiver Due to Invalid Source IP Addresses Total Number of Packets Discarded InAntiReplayDropPk at the IP Layer of eNodeB t the Receiver Due to Replay Attacks Total Number of Packets Discarded at the IP Layer of eNodeB the Receiver Due to No Inbound SA
DSP IPSTAT
TRANSPORT
DSP IPSTAT
TRANSPORT
InSaMissDropPkt
DSP IPSTAT
TRANSPORT
Total Number of Packets Discarded InUnsupportAhAlgD at the IP Layer of eNodeB ropPkt the Receiver Due to Unsupported AH Algorithm
DSP IPSTAT
TRANSPORT
Total Number of Packets Discarded InUnsupportEspAlg at the IP Layer of eNodeB DropPkt the Receiver Due to Unsupported ESP Algorithm Total Number of Plain Packets Received at the IP Layer of the Receiver
DSP IPSTAT
TRANSPORT
InUnEncryptedPkt
eNodeB
DSP IPSTAT
TRANSPORT
Number of Packets Discarded at the IP InShouldEncrypted Layer of the eNodeB Pkt Receiver Due to not Being Encrypted
DSP IPSTAT
TRANSPORT
Number of Packets Successfully OutEncryptSucceed Encrypted at the IP eNodeB Pkt Layer of the Transmitter Total Number of Packets Failed to Be Encrypted at the eNodeB IP Layer of the Transmitter Total Number of Packets Received by the Encryption Module of the Transmitter
DSP IPSTAT
TRANSPORT
OutEncryptFailPkt
DSP IPSTAT
TRANSPORT
OutTotalPkt
eNodeB
DSP IPSTAT
TRANSPORT
Number of Packets That Should be OutNeedEncryptPkt eNodeB Encrypted at the Transmitter Total Number of Packets Discarded OutSaMissDropPkt at the IP Layer of eNodeB the Transmitter due to No Outbound SA Total Number of Packets Discarded OutUnsupportAhAlg at the IP Layer of eNodeB DropPkt the Transmitter Due to Unsupported AH Algorithm
DSP IPSTAT
TRANSPORT
DSP IPSTAT
TRANSPORT
DSP IPSTAT
TRANSPORT
Total Number of Packets Discarded OutUnsupportEspAl at the IP Layer of eNodeB gDropPkt the Transmitter Due to Unsupported ESP Algorithm Total Number of Packets Failed in AH Authentication at the IP Layer of the Transmitter Hardware Total Number of Packets Failed in ESP Encryption at the IP Layer of the Transmitter
DSP IPSTAT
TRANSPORT
OutAhAuthFailPkt
eNodeB
DSP IPSTAT
TRANSPORT
OutEspDecryptFail Pkt
eNodeB
DSP IPSTAT
TRANSPORT
Total Number of Packets Discarded OutSeqOverflowDro at the IP Layer of eNodeB pPkt the Transmitter Due to SN Overflow Total Number of Packets That OutNoNeedEncrypt Should Not Have Pkt Been Encrypted at the IP Layer of the Transmitter
DSP IPSTAT
TRANSPORT
eNodeB
DSP IPSTAT
TRANSPORT
OutIkePkt
Total Number of IKE Packets Sent at eNodeB the IP Layer of the Transmitter
DSP IPSTAT
TUNNEL
SCN
Source Cabinet No. eNodeB
ADD TUNNEL DSP TUNNEL MOD TUNNEL RMV TUNNEL LST TUNNEL ADD TUNNEL DSP TUNNEL MOD TUNNEL RMV TUNNEL LST TUNNEL ADD TUNNEL DSP TUNNEL MOD TUNNEL RMV TUNNEL LST TUNNEL
TUNNEL
SSRN
Source Subrack No. eNodeB
TUNNEL
SSN
Source Slot No.
eNodeB
TUNNEL
TUNNELID
Tunnel No.
eNodeB
ADD TUNNEL DSP TUNNEL MOD TUNNEL RMV TUNNEL LST TUNNEL
TUNNEL
DCN
Destination Cabinet eNodeB No.
ADD TUNNEL MOD TUNNEL DSP TUNNEL LST TUNNEL
TUNNEL
DSRN
Destination Subrack eNodeB No.
TUNNEL
DSN
Destination Slot No. eNodeB
TUNNEL
RcvByte
Number of RX Bytes
eNodeB
DSP TUNNEL
TUNNEL
RcvPacket
eNodeB
DSP TUNNEL
TUNNEL
SendByte
DSP TUNNEL
TUNNEL
SendPacket
eNodeB
DSP TUNNEL
VLANCLASS
VLANGROUPNO
VLAN Group No.
eNodeB
ADD VLANCLASS LST VLANCLASS MOD VLANCLASS RMV VLANCLASS
VLANCLASS
TRAFFIC
Traffic Type
eNodeB
ADD VLANCLASS MOD VLANCLASS RMV VLANCLASS LST VLANCLASS
VLANCLASS
SRVPRIO
User Data Service Priority
eNodeB
ADD VLANCLASS MOD VLANCLASS RMV VLANCLASS LST VLANCLASS
VLANCLASS
VLANID
VLAN ID
eNodeB
ADD VLANCLASS MOD VLANCLASS LST VLANCLASS
VLANCLASS
VLANPRIO
VLAN Priority
eNodeB
ADD VLANCLASS MOD VLANCLASS LST VLANCLASS
VLANMAP
NEXTHOPIP
Next Hop IP
eNodeB
ADD VLANMAP MOD VLANMAP RMV VLANMAP LST VLANMAP
VLANMAP
MASK
Mask
eNodeB
ADD VLANMAP MOD VLANMAP RMV VLANMAP LST VLANMAP
VLANMAP
VLANMODE
VLAN Mode
eNodeB
ADD VLANMAP MOD VLANMAP LST VLANMAP
VLANMAP
VLANID
VLAN ID
eNodeB
VLANMAP
VLANPRIO
VLAN Priority
eNodeB
VLANMAP
VLANGROUPNO
VLAN Group No.
eNodeB
VLANMAP
SETPRIO
Set VLAN Priority
eNodeB
GTPU
TIMEOUTTH
ECHO Frame Timeout
eNodeB
MOD GTPU LST GTPU
GTPU
TIMEOUTCNT
ECHO Frame Timeout Count
eNodeB
MOD GTPU LST GTPU
GTPU
DSCP
DSCP
eNodeB
MOD GTPU LST GTPU
GTPU
STATICCHK
Static Check Switch eNodeB
MOD GTPU LST GTPU
Meaning
IsKey
Mandatory
Dynamic Attribute
Feature ID
Indicates the device number of the BF YES antenna. Indicates the cabinet number of NO the RRU connecting to the BF antenna. Indicates the subrack number of NO the RRU connecting to the BF antenna. Indicates the slot number of the RRU NO connecting to the BF antenna. Indicates the model NO of the BF antenna. Indicates the configured tilt of the NO BF antenna. Indicates the beamwidth formed NO after beamforming. Indicates the frequency band in which the BF antenna operates.
YES
No
LOFD-001024 / TDLOFD-001024
NO
No
LOFD-001024 / TDLOFD-001024
YES
No
LOFD-001024 / TDLOFD-001024
NO
No
LOFD-001024 / TDLOFD-001024
NO
No
LOFD-001024 / TDLOFD-001024
NO
No
LOFD-001024 / TDLOFD-001024
NO
No
LOFD-001024 / TDLOFD-001024
NO
NO
No
LOFD-001024 / TDLOFD-001024
Indicates the type of NO the BF antenna. Indicates the polarization mode of NO the BF antenna. Indicates the beamwidth of the NO antenna element. Indicates the number of physical antenna ports to which the BF antenna is connected.
NO
No
LOFD-001024 / TDLOFD-001024
NO
Yes
LOFD-001024 / TDLOFD-001024 LOFD-001024 / TDLOFD-001024
NO
Yes
NO
NO
Yes
LOFD-001024 / TDLOFD-001024
Indicates the amplitude offset at physical antenna port 1 when the BF antenna is used and NO cell-specific reference signals are transmitted from two ports. Indicates the phase offset at physical antenna port 1 when the BF antenna is used and NO cell-specific reference signals are transmitted from two ports. Indicates the amplitude offset at physical antenna port 2 when the BF antenna is used and NO cell-specific reference signals are transmitted from two ports. Indicates the phase offset at physical antenna port 2 when the BF antenna is used and NO cell-specific reference signals are transmitted from two ports. Indicates the amplitude offset at physical antenna port 3 when the BF antenna is used and NO cell-specific reference signals are transmitted from two ports.
NO
Yes
LOFD-001024 / TDLOFD-001024
NO
Yes
LOFD-001024 / TDLOFD-001024
NO
Yes
LOFD-001024 / TDLOFD-001024
NO
Yes
LOFD-001024 / TDLOFD-001024
NO
Yes
LOFD-001024 / TDLOFD-001024
Indicates the phase offset at physical antenna port 3 when the BF antenna is used and NO cell-specific reference signals are transmitted from two ports. Indicates the amplitude offset at physical antenna port 4 when the BF antenna is used and NO cell-specific reference signals are transmitted from two ports. Indicates the phase offset at physical antenna port 4 when the BF antenna is used and NO cell-specific reference signals are transmitted from two ports. Indicates the amplitude offset at physical antenna port 1 when the BF antenna is used and NO cell-specific reference signals are transmitted from four ports. Indicates the phase offset at physical antenna port 1 when the BF antenna is used and NO cell-specific reference signals are transmitted from four ports.
NO
Yes
LOFD-001024 / TDLOFD-001024
NO
Yes
LOFD-001024 / TDLOFD-001024
NO
Yes
LOFD-001024 / TDLOFD-001024
NO
Yes
LOFD-001024 / TDLOFD-001024
NO
Yes
LOFD-001024 / TDLOFD-001024
Indicates the amplitude offset at physical antenna port 2 when the BF antenna is used and NO cell-specific reference signals are transmitted from four ports. Indicates the phase offset at physical antenna port 2 when the BF antenna is used and NO cell-specific reference signals are transmitted from four ports.
NO
Yes
LOFD-001024 / TDLOFD-001024
NO
Yes
LOFD-001024 / TDLOFD-001024
Indicates the ID of the eNodeB, which uniquely identifies an eNodeB within a PLMN(Public Land NO Mobile Network). This parameter is a part of the CGI(Cell Global Identifier).
NO
No
None
Indicates the name of the eNodeB, which uniquely NO identifies an eNodeB within a PLMN.
NO
No
None
Indicates the eNodeB type.
NO
NO
No
None
Indicates the switch for automatically powering on or off the eNodeB. If the switch is turned on, the RF channels of the RRUs/RFUs are shut down. In this situation, the RRUs/RFUs work in NO low power consumption mode. The RRUs/RFUs are reset after the eNodeB is powered on automatically. Then, the RRUs/RFUs start to carry services.
NO
No
LOFD-001025
Indicates the automatic power-off NO time of the eNodeB.
NO
No
LOFD-001025
Indicates the automatic power-on NO time of the eNodeB.
NO
No
LOFD-001025
Indicates the longitude of the eNodeB. A negative value indicates a NO west longitude, and a positive value indicates an east longitude. Indicates the latitude of the eNodeB. A negative value indicates a NO south latitude, and a positive value indicates a north latitude.
NO
No
None
NO
No
None
Indicates the ESN of the eNodeB NO backplane. This parameter indicates the license status of an eNodeB, which can be default, normal, demo, protected, or emergency. An operating eNodeB enters the default license state if either of the following conditions is true:1. No valid LKF is installed on the eNodeB. 2. The eNodeB has been in the protected NO license state for 60 days. In the default license state, the eNodeB operates at the default values of license control items. An operating eNodeB enters the normal license state when a commercial or Permanent & temporary LKF is installed on the eNodeB. In the normal license state, the eNodeB Indicates whether the eNodeB is automatically powered off. If this parameter is Poweroff, all RRUs/RFUs in the eNodeB enter the NO low power consumption mode, and all cells are unavailable. If this parameter is Normal, the eNodeB runs normally.
NO
Yes
None
NO
Yes
None
NO
Yes
None
Indicates the position of the eNodeB.
NO
NO
No
None
Indicates the format of geographical NO coordinates.
NO
No
None
Indicates the latitude of the eNodeB in the NO WGS-84 coordinate system.
NO
No
None
Indicates the longitude of the eNodeB in the NO WGS-84 coordinate system.
NO
No
None
Indicates the communication protocol type used between the BBU and radio frequency (RF) units. The value CPRI indicates the Huawei proprietary NO protocol, and the value TDL_IR indicates the IR communication protocol defined by China Mobile Communication Corporation (CMCC).
NO
No
None
Indicates the type of YES a KPI alarm.
YES
No
None
Indicates whether to report the KPI NO alarm.
YES
No
None
Indicates the threshold for generating a KPI alarm. The thresholds for delay and variation on the transport network are expressed in units of ms. The thresholds for NO packet loss rates on the transport network or on NE ports are expressed in units of permillage. Other alarm thresholds are expressed in units of percentage.
YES
No
None
Indicates the threshold for clearing a KPI alarm. The thresholds for delay and variation on the transport network are expressed in units of ms. The thresholds for NO packet loss rates on the transport network or on NE ports are expressed in units of permillage. Other alarm thresholds are expressed in units of percentage.
YES
No
None
Indicates the minimum number of KPI checks. If the number of actual checks is less than NO the value of this parameter, KPI alarms are not reported or cleared.
NO
No
None
Indicates the duration for monitoring KPI alarms. The monitoring period is used in one of the following ways: 1. If the monitoring period is set to 15 minutes, 30 minutes, or 60 minutes, the configured start time for monitoring KPI alarms is invalid. For example, if a NO command for a KPI alarm monitoring is started between 8:00 and 8:05 (excluding 8:05) and the monitoring period is 15 minutes, the KPIs generated between 8:00 and 8:15 (excluding 8:15) are monitored. 2. If the monitoring period is set to one day, the configured start time for monitoring KPI alarms is valid. Indicates the start time for monitoring KPI alarms. This parameter is valid only when the NO monitoring period is one day. The start time must be on a full hour. Indicates the number of detection NO periods.
NO
No
None
NO
No
None
NO
No
None
Indicates the sector YES number.
YES
No
None
Indicates the longitude of the sector. A negative value indicates a NO west longitude, and a positive value indicates an east longitude. Indicates the latitude of the sector. A negative value indicates a NO south latitude, and a positive value indicates a north latitude. Indicates the antenna mode of the sector.
YES
No
None
YES
No
None
NO
YES
No
None
Indicates the multiple-input multiple-output (MIMO) mode of the NO sector, which can be normal MIMO or mutual-aid MIMO.
NO
No
LOFD-001038
Indicates the combination mode of the sector.
NO
NO
No
None
Indicates the cabinet number of the RRU where the NO antenna port 1 is located.
YES
No
None
Indicates the subrack number of the RRU where the NO antenna port 1 is located. Indicates the slot number of the RRU NO where the antenna port 1 is located.
YES
No
None
YES
No
None
Indicates the port number of the antenna port 1.
NO
YES
No
None
Indicates the cabinet number of the RRU where the NO antenna port 2 is located. Indicates the subrack number of the RRU where the NO antenna port 2 is located. Indicates the slot number of the RRU NO where the antenna port 2 is located.
NO
No
None
NO
No
None
NO
No
None
NO
NO
No
None
NO
No
None
NO
No
None
NO
No
None
NO
NO
No
None
NO
No
None
NO
No
None
NO
No
None
NO
NO
No
None
NO
No
None
NO
No
None
NO
No
None
NO
NO
No
None
NO
No
None
NO
No
None
NO
No
None
NO
NO
No
None
NO
No
None
NO
No
None
NO
No
None
NO
NO
No
None
NO
No
None
NO
No
None
NO
No
None
NO
NO
No
None
NO
No
None
NO
No
None
NO
No
None
NO
NO
No
None
NO
No
None
NO
No
None
NO
No
None
NO
NO
No
None
NO
No
None
NO
No
None
NO
No
None
NO
NO
No
None
NO
No
None
NO
No
None
NO
No
None
NO
NO
No
None
Indicates the sector name, which is a NO string of a maximum of 30 characters.
NO
No
None
Indicates the altitude of the sector in the WGS-84 coordinate system. If the value is greater than 0, the sector is above the ellipsoid surface in the WGS-84 coordinate system. NO If the value is less than 0, the sector is below the ellipsoid surface in the WGS84 coordinate system. For details, see 3GPP TS 23.032 and 3GPP TS 36.455. Indicates the semimajor axis length of the uncertainty area by which the geographical location of the antennas in the sector is to be included. The NO smaller the parameter value is, the higher the positioning accuracy is. For details about the uncertainty area, see 3GPP TS 23.032.
YES
No
None
NO
No
None
Indicates the semiminor axis length of the uncertainty area by which the geographical location of the antennas in the sector is to be included. The NO smaller the parameter value is, the higher the positioning accuracy is. For details about the uncertainty area, see 3GPP TS 23.032. Indicates the major axis orientation of an uncertainty area by which the geographical location of the antennas in the sector is to be included. (The orientation is the counter-clockwise angle in degrees NO between the major axis and north). The smaller the parameter value is, the higher the positioning accuracy is. For details about the uncertainty area, see 3GPP TS 23.032.
NO
No
None
NO
No
None
Indicates the altitude of an uncertainty area by which the geographical location of the antennas in the sector is to be included. The altitude is in the NO WGS-84 coordinate system. The smaller the parameter value is, the higher the positioning accuracy is. For details about the uncertainty area, see 3GPP TS 23.032. Indicates the confidence level of an uncertainty area by which the geographical location of the antennas in the sector is to be included. The NO smaller the parameter value is, the higher the positioning accuracy is. For details about the uncertainty area, see 3GPP TS 23.032. Indicates the format of geographical NO coordinates. Indicates the latitude of the sector NO in the WGS-84 coordinate system. Indicates the longitude of the sector in the WGS- NO 84 coordinate system.
NO
No
None
NO
No
None
NO
No
None
NO
No
None
NO
No
None
Indicates the flag of the omnidirectional cell. If this parameter is set to TRUE, the cell is an NO omnidirectional cell. If this parameter is set to FALSE, the cell is not an omnidirectional cell. Indicates the cabinet number of the RRU where the NO antenna port 13 is located. Indicates the subrack number of the RRU where the NO antenna port 13 is located. Indicates the slot number of the RRU NO where the antenna port 13 is located.
NO
No
None
NO
No
None
NO
No
None
NO
No
None
NO
NO
No
None
NO
No
None
NO
No
None
NO
No
None
NO
NO
No
None
NO
No
None
NO
No
None
NO
No
None
NO
NO
No
None
NO
No
None
NO
No
None
NO
No
None
NO
NO
No
None
Indicates the maximum output power that can be configured for each TX channel of the sector. This parameter is specified based on the capabilities of all NO TX channels configured for the sector. It is set to the minimum value among the maximum output power of all TX channels. Indicates whether a license is granted to the sector. A license NO is required only by a dual-mode sector.
NO
Yes
None
NO
Yes
None
Indicates the range of RX channel frequencies supported by the sector. This parameter is set to the frequency band between the minimum and maximum frequencies on the RX channels of the RRU where the antenna ports are located. If a sector is configured on NO multiple RRUs, the frequency band supported by the sector is the intersection of frequency bands supported by the RRUs. If a sector is configured on a single RRU, the frequency band of the sector is the frequency band supported by the RRU.
NO
Yes
None
Indicates the range of TX channel frequencies supported by the sector. This parameter is set to the frequency band between the minimum and maximum frequencies on the TX channels of the RRU where the antenna ports are located. If a sector is configured on NO multiple RRUs, the frequency band supported by the sector is the intersection of frequency bands supported by the RRUs. If a sector is configured on a single RRU, the frequency band of the sector is the frequency band supported by the RRU.
NO
Yes
None
Indicates the policy for logging in to the Web LMT. The value COMPATIBLE indicates that if http is entered on the IE, the policy for logging in to the WebLMT is http, and if https is entered on the IE, the policy for logging in to the WebLMT is https. The value HTTPS_ONLY NO indicates that whether http or https is entered on the IE, the policy for logging in to the WebLMT is https. The value LOGIN_HTTPS_O NLY indicates that whether http or https is entered on the IE, the policy for logging in to the WebLMT is https, and then the policy turns to http after the logging. Indicates the device number of the ALD. The device number YES of the ALD must be unique. Indicates the vendor code of the device NO in the scanning result. Indicates the serial number of the device in the scanning result. NO
NO
No
LOFD-001024 / TDLOFD-001024
YES
No
LOFD-001024 / TDLOFD-001024
NO
Yes
LOFD-001024 / TDLOFD-001024
NO
Yes
LOFD-001024 / TDLOFD-001024
Indicates the device name of the ALD, which identifies the ALD. The format of the name is as follows: site_sector_device type_network type. The meanings of the parts are as follows: Site: indicates the number of the BS site. It is uniformly assigned during the network planning. Sector: indicates NO the number of the sector. It is unique within a site. Device type: indicates the type of currently connected device. It can be SINGLE_RET (Single-antenna Remote Electrical Tilt Unit), MULTI_RET (Multiantenna Remote Electrical Tilt Unit), TMA (Towermounted Amplifier). Network type: Indicates the cabinet number of the RRU or RFU NO that controls the ALD.
NO
No
LOFD-001024 / TDLOFD-001024
NO
No
LOFD-001024 / TDLOFD-001024
Indicates the subrack number of the RRU or RFU that controls the ALD.
NO
YES
No
LOFD-001024 / TDLOFD-001024
Indicates the slot number of the RRU NO or RFU that controls the ALD.
YES
No
LOFD-001024 / TDLOFD-001024
Indicates the actual protocol version of NO the ALD. Indicates the total number of ALD subunits. NO
NO
Yes
NO
Yes
Indicates the vendor NO code.
NO
No
None
Indicates the serial number of the ALD. The vendor code NO and the serial number uniquely identify an ALD. Indicates the version information NO about the ALD hardware. Indicates the version information NO about the ALD software. Indicates the device NO model of the ALD.
NO
No
None
NO
Yes
LOFD-001024 / TDLOFD-001024
NO
Yes
NO
Yes
Indicates the device NO type of the ALD.
NO
Yes
LOFD-001024 / TDLOFD-001024
Indicates the port number of the RRU or RFU that controls the ALD. It will be NO NULL if the RRU/RFU does not support to report this parameter.
NO
Yes
None
Indicates the cabinet number of the RRU or RFU where the antenna port is located.
YES
NO
No
LOFD-001024 / TDLOFD-001024
Indicates the subrack number of the RRU or RFU where the antenna port is located.
YES
YES
No
LOFD-001024 / TDLOFD-001024
Indicates the slot number of the RRU or RFU where the YES antenna port is located.
YES
No
LOFD-001024 / TDLOFD-001024
Indicates the number of the YES antenna port on the RRU or RFU.
YES
No
LOFD-001024 / TDLOFD-001024
Indicates the length of the feeder at the NO antenna port. Indicates the DL delay of the TMA. It should be specified according to the specification NO provided by the manufacturer. Typically, this parameter is smaller than 30 ns. Indicates the UL delay of the TMA. It should be specified according to the specification NO provided by the manufacturer. Typically, this parameter is smaller than 30 ns.
NO
No
LOFD-001024 / TDLOFD-001024
NO
No
LOFD-001024 / TDLOFD-001024
NO
No
LOFD-001024 / TDLOFD-001024
Indicates the state of the ALD power supply switch. The ALD power supply switches for the SINGLE_RET (Single-antenna Remote Electrical Tilt), MULTI_RET (Multi-antenna Remote Electrical Tilt), and STMA (Smart Towermounted NO Amplifier)must be set to ON. In actual running, the system may automatically set the ALD power supply switch of the antenna port to OFF when an ALD current abnormal alarm is reported. For details, see ALM-26530 RF Module ALD Current Abnormal.
NO
No
LOFD-001024 / TDLOFD-001024
Indicates the type of the ALD current alarm threshold. The current alarm thresholds for ALDs (excluding userdefined ALDs) must be selected according to the ALD type and connection mode. For 12 dB nonAISG TMAs only: the undercurrent alarm threshold is 30 mA, the undercurrent alarm NO clearance threshold is 40 mA, the overcurrent alarm threshold is 170 mA, and the overcurrent alarm clearance threshold is 150 mA. For 24 dB non-AISG TMAs only: the undercurrent alarm threshold is 40 mA, the undercurrent alarm clearance threshold is 60 mA, the overcurrent alarm threshold is Indicates the undercurrent alarm occur threshold. When the ALD current value is smaller than this threshold, an ALM- NO 26530 RF Module ALD Current Abnormal alarm is reported. The specific problem is undercurrent.
NO
No
LOFD-001024 / TDLOFD-001024
NO
No
LOFD-001024 / TDLOFD-001024
Indicates the undercurrent alarm clear threshold. When the ALD current value is greater than this NO threshold, the ALM26530 RF Module ALD Current Abnormal alarm is cleared.
NO
No
LOFD-001024 / TDLOFD-001024
Indicates the overcurrent alarm occur threshold. When the ALD current value is greater than this threshold, an ALM26530 RF Module ALD Current Abnormal alarm is reported. The specific problem is overcurrent. When the overcurrent alarm occur threshold is lower than the maximum NO current supported by the hardware, the overcurrent alarm threshold prevails. When the overcurrent alarm occur threshold is higher than the maximum current supported by the hardware, the maximum current supported by the hardware serves as the overcurrent alarm threshold.
NO
No
LOFD-001024 / TDLOFD-001024
Indicates the overcurrent alarm clear threshold. When the ALD current value is smaller than this threshold, the ALM26530 RF Module ALD Current Abnormal alarm is cleared. When the overcurrent alarm clear threshold is lower than the maximum value of current supported NO by the hardware, the overcurrent alarm threshold prevails. When the overcurrent alarm clear threshold is higher than the maximum current supported by the hardware, the maximum current supported by the hardware serves as the overcurrent alarm threshold. Indicates the present value of the NO current of the ALD. Indicates the actual status of the ALD NO power supply switch. Indicates the antenna type. This parameter can be NO set to SINGLE_RET or MULTI_RET.
NO
No
LOFD-001024 / TDLOFD-001024
NO
Yes
NO
Yes
YES
No
LOFD-001024 / TDLOFD-001024
Indicates the polarization type of the antenna. This parameter can be set to SINGLE or DUAL.
NO
YES
No
LOFD-001024 / TDLOFD-001024
Indicates the connection scenario of the antenna. This parameter must be set based on the hardware installation. The vendor code and NO serial number of the device must be correctly configured in a non-regular scenario. This parameter can be set to REGULAR, DAISY_CHAIN.
YES
No
LOFD-001024 / TDLOFD-001024
Indicates the number of configured RET subunits. Indicates the antenna type of RET.
NO
NO
No
LOFD-001024 / TDLOFD-001024
NO
NO
Yes
None
Indicates the device number of the ALD. The device number YES of the ALD must be unique. Indicates the vendor code of the device NO in the scanning result. Indicates the serial number of the device in the scanning result. NO
YES
No
LOFD-001024 / TDLOFD-001024
NO
Yes
LOFD-001024 / TDLOFD-001024
NO
Yes
LOFD-001024 / TDLOFD-001024
NO
No
LOFD-001024 / TDLOFD-001024
NO
No
LOFD-001024 / TDLOFD-001024
NO
YES
No
LOFD-001024 / TDLOFD-001024
YES
No
LOFD-001024 / TDLOFD-001024
NO
Yes
NO
Yes
NO
No
None
NO
No
None
NO
Yes
LOFD-001024 / TDLOFD-001024
NO
Yes
NO
Yes
NO
Yes
LOFD-001024 / TDLOFD-001024
NO
Yes
None
Indicates the device YES number of the RET.
YES
No
LOFD-001024 / TDLOFD-001024
Indicates the RET subunit number. The number starts from 1. Each subunit shares the same High-Level Data Link Control (HDLC) address with the ALD.
YES
YES
No
LOFD-001024 / TDLOFD-001024
Indicates the antenna azimuth.
NO
NO
No
LOFD-001024 / TDLOFD-001024
Indicates the model of the RET antenna NO module.
NO
No
LOFD-001024 / TDLOFD-001024
Indicates the base station ID.AISG1.1based RET antennas support a maximum sector ID length of 4 characters. If the NO input sector ID has more than 4 characters, only the first 4 characters are saved on the RET antenna. Indicates the beamwidth of band 1. Beamwidth is used to describe the capability of the NO antenna to transmit RF signals. It is also used to measure the antenna pattern. Indicates the beamwidth of band 2. Beamwidth is used to describe the capability of the NO antenna to transmit RF signals. It is also used to measure the antenna pattern. Indicates the beamwidth of band 3. Beamwidth is used to describe the capability of the NO antenna to transmit RF signals. It is also used to measure the antenna pattern. Indicates the beamwidth of band 4. Beamwidth is used to describe the capability of the NO antenna to transmit RF signals. It is also used to measure the antenna pattern.
NO
No
LOFD-001024 / TDLOFD-001024
NO
No
LOFD-001024 / TDLOFD-001024
NO
No
LOFD-001024 / TDLOFD-001024
NO
No
LOFD-001024 / TDLOFD-001024
NO
No
LOFD-001024 / TDLOFD-001024
Indicates the gain of NO band 1.
NO
No
LOFD-001024 / TDLOFD-001024
NO
No
LOFD-001024 / TDLOFD-001024
NO
No
LOFD-001024 / TDLOFD-001024
NO
No
LOFD-001024 / TDLOFD-001024
Indicates the installation date.
NO
NO
No
LOFD-001024 / TDLOFD-001024
Indicates the mechanical tilt of the installation.
NO
NO
No
LOFD-001024 / TDLOFD-001024
Indicates the ID of the installer.
NO
NO
No
LOFD-001024 / TDLOFD-001024
Indicates supported NO band 1.
NO
No
LOFD-001024 / TDLOFD-001024
NO
No
LOFD-001024 / TDLOFD-001024
NO
No
LOFD-001024 / TDLOFD-001024
NO
No
LOFD-001024 / TDLOFD-001024
Indicates the sector NO ID.
NO
No
LOFD-001024 / TDLOFD-001024
Indicates the serial NO number of the ALD.
NO
No
LOFD-001024 / TDLOFD-001024
Indicates the maximum tilt supported by the RET subunit. Indicates the minimum tilt supported by the RET subunit.
NO
NO
Yes
LOFD-001024 / TDLOFD-001024
NO
NO
Yes
LOFD-001024 / TDLOFD-001024
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
Indicates the beamwidth of band 1. Beamwidth describes the capability of an NO antenna to transmit RF signals. It also defines the width of the antenna pattern. Indicates the beamwidth of band 2. Beamwidth describes the capability of an NO antenna to transmit RF signals. It also defines the width of the antenna pattern. Indicates the beamwidth of band 3. Beamwidth describes the capability of an NO antenna to transmit RF signals. It also defines the width of the antenna pattern. Indicates the beamwidth of band 4. Beamwidth describes the capability of an NO antenna to transmit RF signals. It also defines the width of the antenna pattern. Indicates the gain of band 1. Indicates the gain of band 2. Indicates the gain of band 3. Indicates the gain of band 4. Indicates the cabinet number of the RRU where the RET port is located. NO NO NO NO
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO NO NO NO
Yes Yes Yes Yes
None None None None LOFD-001024 / TDLOFD-001024
YES
YES
No
Indicates the subrack number of YES the RRU where the RET port is located.
YES
No
LOFD-001024 / TDLOFD-001024
Indicates the slot number of the RRU YES where the RET port is located. Indicates the number of the RET antenna port on an YES RRU. This parameter is set to RET_PORT. Indicates the state of the ALD power supply switch. If SINGLE_RET(Singl e-antenna Remote Electrical Tilt) or MULTI_RET(Multiantenna Remote Electrical Tilt) is used, the ALD power supply switch must be set to ON. In actual running, the RRU/RFU automatically sets this switch to OFF for an RET port NO when the ALM26530 RF Module ALD Current Abnormal alarm is reported due to overcurrent, overcurrent protection, or undercurrent protection (the RRU/RFU supports undercurrent protection and Low Current Protect Switch is set to ON for the RRU/RFU) on the RET port.
YES
No
LOFD-001024 / TDLOFD-001024
YES
No
LOFD-001024 / TDLOFD-001024
NO
No
LOFD-001024 / TDLOFD-001024
Indicates the type of the ALD current alarm threshold. The current alarm threshold for the ALDs (excluding user-defined ALDs), that is, for RET antennas only (multiwire cable), must be selected according to the ALD type. The undercurrent alarm threshold is 10 mA, the NO undercurrent alarm clearance threshold is 15 mA, the overcurrent alarm threshold is 150 mA, and the overcurrent alarm clearance threshold is 120 mA. This parameter can be set to UER_SELF_DEFIN E or RET_ONLY_MULTI CORE. Indicates the undercurrent alarm occur threshold. When the ALD current value is smaller than this threshold, an ALM- NO 26530 RF Module ALD Current Abnormal alarm is reported. The specific problem is undercurrent.
NO
No
LOFD-001024 / TDLOFD-001024
NO
No
LOFD-001024 / TDLOFD-001024
Indicates the undercurrent alarm clear threshold. When the ALD current value is greater than this NO threshold, the ALM26530 RF Module ALD Current Abnormal alarm is cleared. Indicates the overcurrent alarm occur threshold. When the ALD current value is greater than this threshold, an ALM26530 RF Module ALD Current Abnormal alarm is reported. The specific problem is overcurrent. When the overcurrent alarm occur threshold is lower than the maximum NO current supported by the hardware, the overcurrent alarm threshold prevails. When the overcurrent alarm occur threshold is higher than the maximum current supported by the hardware, the maximum current supported by the hardware serves as the overcurrent alarm threshold.
NO
No
LOFD-001024 / TDLOFD-001024
NO
No
LOFD-001024 / TDLOFD-001024
Indicates the overcurrent alarm clear threshold. When the ALD current value is smaller than this threshold, the ALM26530 RF Module ALD Current Abnormal alarm is cleared. When the overcurrent alarm clear threshold is lower than the maximum value of current supported NO by the hardware, the overcurrent alarm threshold prevails. When the overcurrent alarm clear threshold is higher than the maximum current supported by the hardware, the maximum current supported by the hardware serves as the overcurrent alarm threshold. Indicates the present value of the NO current of the ALD. Indicates the actual status of the ALD NO power supply switch.
NO
No
LOFD-001024 / TDLOFD-001024
NO
Yes
NO
Yes
Indicates the device YES number of the RET.
YES
No
LOFD-001024 / TDLOFD-001024
Indicates the number of the RET subunit. The YES number starts from 1.
YES
No
LOFD-001024 / TDLOFD-001024
Indicates the online status of the NO subunit. Indicates the actual tilt of the RET NO subunit. Indicates the sector ID of the RET NO subunit.
NO
Yes
LOFD-001024 / TDLOFD-001024
NO
Yes
LOFD-001024 / TDLOFD-001024 None
NO
Yes
Indicates the cabinet number of the RRU or RFU NO that is connected to antenna port 1.
NO
No
LOFD-001024 / TDLOFD-001024
Indicates the subrack number of the RRU or RFU NO that is connected to antenna port 1.
NO
No
LOFD-001024 / TDLOFD-001024
Indicates the slot number of the RRU or RFU that is NO connected to antenna port 1.
NO
No
LOFD-001024 / TDLOFD-001024
Indicates the port number of the RRU or RFU that is NO connected to antenna port 1.
NO
No
LOFD-001024 / TDLOFD-001024
Indicates the cabinet number of the RRU or RFU that is connected to antenna port 2. This NO parameter is valid when a dualpolarized antenna is used.
NO
No
LOFD-001024 / TDLOFD-001024
Indicates the subrack number of the RRU or RFU that is connected to antenna port 2. This NO parameter is valid when a dualpolarized antenna is used.
NO
No
LOFD-001024 / TDLOFD-001024
Indicates the slot number of the RRU or RFU that is connected to antenna port 2. This NO parameter is valid when a dualpolarized antenna is used.
NO
No
LOFD-001024 / TDLOFD-001024
Indicates the port number of RRU that is connected to antenna port 2. This NO parameter is valid when a dualpolarized antenna is used.
NO
No
LOFD-001024 / TDLOFD-001024
Indicates the antenna tilt of the RET subunit.
NO
NO
No
LOFD-001024 / TDLOFD-001024
Indicates the alarm error range for the NO tilt of the RET subunit. Indicates the name NO of the RET subunit. Indicates the number of configured TMA subunits.
NO
No
LOFD-001024 / TDLOFD-001024
NO
No
None
NO
YES
No
LOFD-001024 / TDLOFD-001024
Indicates the device number of the ALD. The device number YES of the ALD must be unique. Indicates the vendor code of the device NO in the scanning result. Indicates the serial number of the device in the scanning result. NO
YES
No
LOFD-001024 / TDLOFD-001024
NO
Yes
LOFD-001024 / TDLOFD-001024
NO
Yes
LOFD-001024 / TDLOFD-001024
NO
No
LOFD-001024 / TDLOFD-001024
NO
No
LOFD-001024 / TDLOFD-001024
NO
YES
No
LOFD-001024 / TDLOFD-001024
YES
No
LOFD-001024 / TDLOFD-001024
NO
Yes
NO
Yes
NO
No
None
NO
No
None
NO
Yes
LOFD-001024 / TDLOFD-001024
NO
Yes
NO
Yes
NO
Yes
LOFD-001024 / TDLOFD-001024
NO
Yes
None
Indicates the device YES number of the TMA.
YES
No
LOFD-001024 / TDLOFD-001024
Indicates the number of the TMA subunit. The number starts from YES 1. The subunit shares the same HDLC address with the ALD.
YES
No
LOFD-001024 / TDLOFD-001024
Indicates the antenna azimuth.
NO
NO
No
LOFD-001024 / TDLOFD-001024
Indicates the base station ID.
NO
NO
No
LOFD-001024 / TDLOFD-001024
Indicates the beamwidth of band 1. Beamwidth is used to describe the capability of the NO antenna to transmit RF signals. It is also used to measure the antenna pattern.
NO
No
LOFD-001024 / TDLOFD-001024
Indicates the beamwidth of band 2. Beamwidth is used to describe the capability of the NO antenna to transmit RF signals. It is also used to measure the antenna pattern. Indicates the beamwidth of band 3. Beamwidth is used to describe the capability of the NO antenna to transmit RF signals. It is also used to measure the antenna pattern. Indicates the beamwidth of band 4. Beamwidth is used to describe the capability of the NO antenna to transmit RF signals. It is also used to measure the antenna pattern.
NO
No
LOFD-001024 / TDLOFD-001024
NO
No
LOFD-001024 / TDLOFD-001024
NO
No
LOFD-001024 / TDLOFD-001024
NO
No
LOFD-001024 / TDLOFD-001024
NO
No
LOFD-001024 / TDLOFD-001024
NO
No
LOFD-001024 / TDLOFD-001024
NO
No
LOFD-001024 / TDLOFD-001024
Indicates the installation date.
NO
NO
No
LOFD-001024 / TDLOFD-001024
Indicates the mechanical tilt of the installation.
NO
NO
No
LOFD-001024 / TDLOFD-001024
Indicates the ID of the installer.
NO
NO
No
LOFD-001024 / TDLOFD-001024
NO
No
LOFD-001024 / TDLOFD-001024
NO
No
LOFD-001024 / TDLOFD-001024
NO
No
LOFD-001024 / TDLOFD-001024
NO
No
LOFD-001024 / TDLOFD-001024
Indicates the sector NO ID.
NO
No
LOFD-001024 / TDLOFD-001024
Indicates the serial NO number of the ALD.
NO
No
LOFD-001024 / TDLOFD-001024
Indicates the model of the RET antenna NO connected to the TMA. Indicates the maximum gain supported.
NO
No
LOFD-001024 / TDLOFD-001024
NO
NO
Yes
LOFD-001024 / TDLOFD-001024
Indicates the minimum gain supported.
NO
NO
Yes
LOFD-001024 / TDLOFD-001024
Indicates the type of TMA subunit. It indicates whether the VS NO measurement and the bypass mode are supported.
NO
Yes
None
Indicates the step NO for the gain change.
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
Indicates the beamwidth of band 1. Beamwidth describes the capability of an NO antenna to transmit RF signals. It also defines the width of the antenna pattern. Indicates the beamwidth of band 2. Beamwidth describes the capability of an NO antenna to transmit RF signals. It also defines the width of the antenna pattern. Indicates the beamwidth of band 3. Beamwidth describes the capability of an NO antenna to transmit RF signals. It also defines the width of the antenna pattern. Indicates the beamwidth of band 4. Beamwidth describes the capability of an NO antenna to transmit RF signals. It also defines the width of the antenna pattern. Indicates the gain of NO band 1. Indicates the gain of NO band 2.
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO NO
Yes Yes
None None
Indicates the gain of NO band 3. Indicates the gain of NO band 4.
NO NO
Yes Yes
None None
Indicates the lowest RX frequency band NO of the subunit.
NO
Yes
None
Indicates the highest TX frequency band of the subunit.
NO
NO
Yes
None
Indicates the lowest TX frequency band NO of the subunit.
NO
Yes
None
Indicates the highest RX frequency band of the subunit.
NO
NO
Yes
None
Indicates the device YES number of the TMA. Indicates the number of the TMA YES subunit, which starts from 1. Indicates the sector ID of the TMA NO subunit. Indicates the actual gain of the TMA NO subunit. Indicates the actual working mode of the NO TMA subunit.
YES
No
LOFD-001024 / TDLOFD-001024 LOFD-001024 / TDLOFD-001024 LOFD-001024 / TDLOFD-001024 LOFD-001024 / TDLOFD-001024 LOFD-001024 / TDLOFD-001024
YES
No
NO
Yes
NO
Yes
NO
Yes
Indicates the online status of the TMA NO subunit.
NO
Yes
LOFD-001024 / TDLOFD-001024
Indicates the number of the antenna port to which the TMA subunit is connected. Indicates the cabinet number of the RRU or RFU that provides the antenna port to which the TMA subunit is connected.
NO
NO
No
LOFD-001024 / TDLOFD-001024
NO
NO
No
LOFD-001024 / TDLOFD-001024
Indicates the slot number of the RRU or RFU that provides the NO antenna port to which the TMA subunit is connected. Indicates the subrack number of the RRU or RFU that provides the antenna port to which the TMA subunit is connected.
NO
No
LOFD-001024 / TDLOFD-001024
NO
NO
No
LOFD-001024 / TDLOFD-001024
Indicates the gain of the TMA subunit.If this parameter is set NO to 255, it is invalid and the actual gain is not changed.
NO
No
LOFD-001024 / TDLOFD-001024
Indicates the working mode of the TMA subunit. If the TMA subunit works in BYPASS mode, it does not amplify the uplink signals.If this NO parameter is set to DEVICE_DEFAULT _VALUE, it is invalid and the actual mode is not changed. Indicates the cabinet number of the AAU where the YES virtual antenna port is located. Indicates the subrack number of the AAU where the YES virtual antenna port is located. Indicates the slot number of the AAU where the virtual YES antenna port is located.
NO
No
LOFD-001024 / TDLOFD-001024
YES
No
None
YES
No
None
YES
No
None
Indicates the number of the YES virtual antenna port.
YES
No
None
Indicates the device number of the YES virtual RET antenna.
YES
No
None
Indicates the cabinet number of the AAU where the NO virtual RET antenna is located. Indicates the subrack number of the AAU where the NO virtual RET antenna is located. Indicates the slot number of the AAU where the virtual NO RET antenna is located.
YES
No
None
YES
No
None
YES
No
None
Indicates the device name of the virtual NO RET antenna.
YES
No
None
Indicates the number of subunits NO contained in the virtual RET antenna. Indicates the cabinet number of the AAU where the NO virtual RET subunit is located.
NO
No
None
YES
No
None
Indicates the number of the first virtual antenna port NO to which the virtual RET subunit is connected.
NO
No
None
Indicates the number of the second virtual antenna port to which the virtual RET subunit is connected.
NO
NO
No
None
Indicates the device name of the virtual NO RET subunit. Indicates the device number of the virtual RET antenna YES where the virtual RET subunit is contained. Indicates the polarization type of the virtual antenna NO port 1 to which the virtual RET subunit is connected. Indicates the slot number of the AAU where the virtual NO RET subunit is located. Indicates the subrack number of the AAU where the NO virtual RET subunit is located. Indicates the number of the YES virtual RET subunit.
YES
No
None
YES
No
None
NO
No
None
YES
No
None
YES
No
None
YES
No
None
Indicates the number of the third virtual antenna port NO to which the virtual RET subunit is connected.
NO
No
None
Indicates the polarization type of the virtual antenna NO port 2 to which the virtual RET subunit is connected. Indicates the downlink tilt of the virtual RET subunit. If this parameter is NO set to 32767, it is invalid and the actual tilt is not changed. Indicates the uplink tilt of the virtual RET subunit. If this parameter is set to NO 32767, it is invalid and the actual tilt is not changed.
NO
No
None
NO
No
None
NO
No
None
Indicates the number of the fourth virtual antenna port NO to which the virtual RET subunit is connected.
NO
No
None
Indicates the polarization type of the virtual antenna NO port 3 to which the virtual RET subunit is connected. Indicates the polarization type of the virtual antenna NO port 4 to which the virtual RET subunit is connected. Indicates the number of ports that NO can be added to a virtual RET subunit. Indicates the number of the control link at the local end. Indicates the cabinet number of the local node at one end of the control link. Indicates the subrack number of the local node at one end of the control link. YES
NO
No
None
NO
No
None
NO
No
None
YES
No
None
NO
YES
No
None
NO
YES
No
None
Indicates the slot number of the local NO node at one end of the control link. Indicates the cabinet number of the upper-level node at the other end of the control link. Indicates the
YES
No
None
NO
YES
No
None
subrack number of the upper-level NO node at the other end of the control link. Indicates the slot number of the upperlevel node at the NO other end of the control link. Indicates the port number of the upperlevel node at the other end of the NO control link.Values 0 to 4 indicate the ports M0 to M4 on the board panel. Indicates the number of the port whose control link status is queried. When this parameter is set to a value within the range from 0 to 4, this parameter indicates a primary port on the UCIU board. When this parameter is set to 8, this parameter indicates the secondary port on the UCIU and UMPT board. Indicates the start time of the measurement.
YES
No
None
YES
No
None
YES
No
None
NO
NO
Yes
None
NO
NO
Yes
None
Indicates the number of error packets within the NO measurement periods in the latest one day. Indicates the ratio of the number of error packets to that of received packets NO within the measurement periods in the latest one day. Indicates the ratio of the Loss Of Signal (LOS) duration to one day. The LOS duration is NO measured within the measurement periods in the latest one day. Indicates the Loss Of Signal (LOS) duration measured within the NO measurement periods in the latest one day. Indicates the number of error packets within the NO measurement periods in the latest one hour. Indicates the ratio of the number of error packets to that of received packets NO within the measurement periods in the latest one hour. Indicates the ratio of the Loss Of Signal (LOS) duration to one hour. The LOS duration is NO measured within the measurement periods in the latest one hour.
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
Indicates the Loss Of Signal (LOS) duration measured within the NO measurement periods in the latest one hour. Indicates the number of error packets within the NO measurement periods in the latest one week. Indicates the ratio of the number of error packets to that of received packets NO within the measurement periods in the latest one week. Indicates the ratio of the Loss Of Signal (LOS) duration to one week. The LOS duration is NO measured within the measurement periods in the latest one week. Indicates the Loss Of Signal (LOS) duration measured within the NO measurement periods in the latest one week. Indicates the total number of error packets within the measurement periods. Indicates the total Loss Of Signal (LOS) duration within the measurement periods. Indicates the total length of measurement periods.
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
NO
Yes
None
NO
NO
Yes
None
NO
NO
Yes
None
Indicates the total number of received packets within the NO measurement periods. Indicates the number of the BITS YES clock link. Indicates the number of the cabinet where the BITS clock link is configured. Indicates the number of the subrack where the BITS clock link is configured. Indicates the number of the slot where the BITS clock link is configured.
NO
Yes
None
NO
No
None
NO
NO
No
None
NO
NO
No
None
NO
NO
No
None
Indicates the activation status of the BITS clock link. If the link is active, NO the BITS clock link is the current clock source of the system. Indicates the availability of a BITS clock link. Only an available clock link can serve as the current clock NO source. Otherwise, the clock link cannot be locked even if it is activated.
NO
Yes
None
NO
Yes
None
Indicates the priority of the clock source. The value 1 indicates that the current clock source has the highest NO priority, and the value 4 indicates that the current clock source has the lowest priority. Indicates the number of the E1/T1 line clock link.
NO
No
None
YES
NO
No
None
Indicates the number of the cabinet where the NO E1/T1 line clock link is configured. Indicates the number of the subrack where the NO E1/T1 line clock link is configured. Indicates the number of the slot where the E1/T1 line clock link is configured. Indicates the number of the port where the E1/T1 line clock link is configured.
NO
No
None
NO
No
None
NO
NO
No
None
NO
NO
No
None
Indicates the activation status of the E1/T1 line clock link. If the link is NO active, the E1/T1 line clock link is the current clock source of the system.
NO
Yes
None
Indicates the availability of the E1/T1 line clock link. Only an available clock link can serve as the current clock source. Otherwise, the clock link cannot be locked even if it is activated.
NO
NO
Yes
None
Indicates the priority of the clock source. The value 1 indicates that the current clock source has the highest NO priority, and the value 4 indicates that the current clock source has the lowest priority. Indicates the number of the peer YES reference clock link. Indicates the standard of the peer reference clock. The standard of the peer reference NO clock is another standard in the same BBU subrack by default. Indicates the activation status of the peer reference clock link. If the link is active, the peer NO reference clock link is the current clock source of the system.
NO
No
None
NO
No
None
NO
No
None
NO
Yes
None
Indicates the availability of the peer reference clock link. Only an available clock link can serve as the current clock source. Otherwise, the clock link cannot be locked even if it is activated.
NO
NO
Yes
None
Indicates the number of a TOD clock link. The number of the TOD clock link must correspond to the number of the TOD YES port on the USCUb or UMPT. For example, clock link No.0 corresponds to port No.0, clock link No.1 corresponds to port No.1. Indicates the type of a TOD clock link. It indicates whether the corresponding TOD port is an input or output port. An input port is used to input clock signals NO to the BS, and an output port is used to provide clock signals for other BSs. Only the TOD clock of input type can serve as a clock source. Indicates the number of the cabinet where the TOD clock link is configured. Indicates the number of the subrack where the TOD clock link is configured.
NO
No
None
NO
No
None
NO
NO
No
None
NO
NO
No
None
Indicates the number of the slot where the TOD clock link is configured.
NO
NO
No
None
Indicates the type of TOD feeder, which can only be the NO twisted-pair cable currently. Indicates the length of the TOD feeder. The feeder delay is calculated on the basis of the TOD feeder length to ensure the clock accuracy. The clock accuracy is affected NO if there is an excessively large difference (about 20 m) between the value of this parameter and the actual feeder length.
NO
No
None
NO
No
None
Indicates the activation status of a TOD clock link. If the link is active, NO the TOD clock link is the current clock source of the system. Indicates the availability of an TOD clock link. Only an available clock link can serve as the current clock NO source. Otherwise, the clock link cannot be locked even if it is activated. Indicates the feeder delay of the TOD clock link. If the feeder delay is not NO supported by the satellite card, this parameter is set to NULL. Indicates the priority of the clock source. The value 1 indicates that the current clock source has the highest NO priority, and the value 4 indicates that the current clock source has the lowest priority.
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
No
None
Indicates the number of the GPS YES clock link.
NO
No
None
Indicates the cabinet number of the board where the NO satellite card is attached.
NO
No
None
Indicates the subrack number of the board where the NO satellite card is attached. Indicates the slot number of the board NO where the satellite card is attached.
NO
No
TDLOFD-009001
NO
No
None
Indicates the mode to obtain the NO position of the GPS satellite.
NO
No
None
Indicates the longitude of the GPS antenna. A negative value indicates the west longitude, and a positive value indicates the east longitude.
NO
NO
No
None
Indicates the latitude of the GPS antenna. A negative value indicates the NO south latitude, and a positive value indicates the north latitude. Indicates the altitude of the GPS antenna. A negative value indicates that the GPS antenna is NO below the sea level, and a positive value indicates that the GPS antenna is above the sea level. Indicates the antenna angle, which is the angle with the horizontal line.
NO
No
None
NO
No
None
NO
NO
No
None
Indicates the delay of the GPS feeder. Some satellite cards NO do not support querying of this information.
NO
Yes
None
Indicates the duration for tracing the position of the GPS satellite.
NO
NO
No
None
Indicates the precision requirement for NO tracing the position of the GPS satellite. Indicates the type of the GPS feeder, which can be the twisted-pair cable or coaxial cable. The board-mounted NO GPS antenna uses the coaxial cable. The RGPS antenna uses the twistedpair cable.
NO
No
None
NO
No
None
Indicates the length of the GPS feeder. The actual feeder length is the one between the GPS receiver and the board connected to the GPS antenna. The feeder delay is calculated on the NO basis of the GPS feeder length to increase the clock accuracy. The clock accuracy is affected if the configured feeder length is 20 m greater than the actual feeder length. Indicates the software version of NO the satellite receiver. Indicates whether the position of the GPS satellite is locked by the GPS reference receiver. Indicates whether the calendar information of the GPS reference receiver is valid. Indicates whether the GPS satellite positioned by the GPS reference receiver is valid.
NO
No
None
NO
Yes
None
NO
NO
Yes
None
NO
NO
Yes
None
NO
NO
Yes
None
Indicates whether the position of the GPS satellite is set NO on the GPS reference receiver. Indicates the clock adjusting state of the GPS reference receiver. Indicates whether the clock mode of the GPS reference receiver is valid. NO
NO
Yes
None
NO
Yes
None
NO
NO
Yes
None
Indicates the number of locked GLONASS satellites.
NO
NO
Yes
None
Indicates the physical status of the satellite card, which can be NOTEXIST (Inexistent), ANTENNASHORTE D (Antenna Shorted), ANTENNAOPENE D (Antenna Opened), SELF_CHECK_FAI LURE (Self-check NO Failure), COMEXCEPTION (COM Port Communication Fault), NORMAL (Normal), UNKNOWN (Unknown Exception), USCUINVALID (USCU Invalid), or UNKNOWN_STAR _CARD (Unknown Star Card).
NO
Yes
None
Indicates the physical type of the satellite card, which can be M12M, UT, RT, K161, GG16, JNS100, RGPS, NO CWAIN, RTSMT, UBLOX5, BD7702, NAVIOR, PPSTOD, M1000, TRGPS, BD7702CMS, or OEM4.
NO
Yes
None
Indicates the number of locked NO GPS satellites. Indicates the working mode of the satellite card, which can be GPS, GLONASS, COMPASS, GPS/GLONASS, COMPASS/GPS with COMPASS prioritized, and GPS/COMPASS with GPS prioritized. Satellite cards are classified into dual-mode satellite cards and single-mode NO satellite cards. A dual-mode satellite card supports two satellite searching modes. For example, the working mode of a COMPASS/GPS satellite card can be COMPASS prioritized or GPS prioritized. In COMPASS prioritized mode, the satellite card processes signals from COMPASS Indicates the number of locked NO COMPASS satellites. Indicates the activation status of the GPS clock link. If the link is active, NO the GPS clock link is the current clock source of the system.
NO
Yes
None
NO
No
None
NO
Yes
None
NO
Yes
None
Indicates the priority of the clock source. The value 1 indicates the current clock source has NO the highest priority, and the value 4 indicates the current clock source has the lowest priority.
NO
No
None
Indicates the number of the IP clock link.
YES
NO
No
None
Indicates the type of the IP clock protocol, which can be PTP or Huawei proprietary protocol. PTP includes IEEE1588 V2 and G.8265.1. IEEE1588 V2, defined by the IEEE, supports both time synchronization and frequency synchronization. NO G.8265.1 supports frequency synchronization only. Huawei proprietary protocol, which is the Huaweidefined IP clock protocol, applies to the interconnection between Huawei equipment and supports frequency synchronization only.
NO
No
LOFD-00301302 / TDLOFD-00301302 LOFD-00301303
Indicates the number of the cabinet where the IP clock link is configured. Indicates the number of the subrack where the IP clock link is configured. Indicates the number of the slot where the IP clock link is configured.
NO
NO
No
None
NO
NO
No
None
NO
NO
No
None
Indicates the client IPv4 address of the NO IP clock link.
NO
No
LOFD-00301302 / TDLOFD-00301302 LOFD-00301303
Indicates the server IPv4 address of the NO IP clock link.
NO
No
LOFD-00301302 / TDLOFD-00301302 LOFD-00301303
Indicates the domain to which the IP clock link belongs. The setting NO of this parameter must be the same as the setting of the clock server.
NO
No
LOFD-00301302 / TDLOFD-00301302
Indicates the compensation mechanism for the transmission delay between the Time Server and BS. When the Boundary clock or Transparent clock is not supported on the transport network, this parameter can be set to E2E only. When the Boundary clock or Transparent clock is NO supported on the transport network, this parameter is set to P2P. There are two application modes for IEEE1588 V2: the Point-to-Point mode (P2P) and End-toEnd mode (E2E). The Point-to-Point mode, also known as the fullsupported mode, involves all clock nodes: the OC, BC, and TC. This mode
NO
No
None
Indicates whether the BMC (Best Master Clock) algorithm is enabled or not. ON indicates that the BMC NO algorithm is enabled, and OFF indicates that the BMC algorithm is disabled.
NO
No
None
Indicates the priority configured by the user for the BMC (Best Master Clock) algorithm. The information about the priority can be collected from the Time Server. This parameter specifies the clock quality NO that is anticipated by the user. The Time Server with the matching clock quality is selected as the target server. Class0 has the highest priority, and Class0 to Class3 indicate priorities in descending order.
NO
No
None
NO
No
None
NO
No
None
NO
No
None
Indicates the current priority class NO of the IP clock link.
NO
Yes
None
Indicates whether the clock source is specified.
NO
NO
No
None
Indicates the MAC address of the clock source for the IP clock server. The NO MAC address must be in the format of XXXX-XXXX-XXXX.
NO
No
None
Indicates the activation status of the IP clock link. If the IP clock link is NO active, it is the current clock source of the system. Indicates the availability of the IP clock link. Only an available clock link can serve as the current clock NO source. Otherwise, the clock link cannot be locked even if it is activated. Indicates the networking type for NO the IP clock.
NO
Yes
None
NO
Yes
None
NO
No
LOFD-00301302 / TDLOFD-00301302
Indicates the compensation for asymmetry of IP clock links.
NO
NO
No
LOFD-00301302 / TDLOFD-00301302
Indicates the step mode, which can be NO ONE_STEP or TWO_STEP. Indicates the selfacquired VLAN ID NO of the IP clock server. Indicates the offset of the Universal NO Time Coordinated (UTC).
NO
Yes
None
NO
Yes
None
NO
Yes
None
Indicates the priority of the clock source. The value 1 indicates that the current clock source has the highest NO priority, and the value 4 indicates that the current clock source has the lowest priority. Indicates the frequency at which the clock source sends announcement packets based on its negotiation with the BS. Indicates the frequency at which the clock source sends synchronization packets based on its negotiation with the BS.
NO
No
None
NO
NO
No
None
NO
NO
No
None
Indicates the priority of the IP clock server. The value 0 indicate the highest priority, and the value 255 indicates the lowest priority.If two IP clock servers are required, the value of this parameter is used NO to identify the active and standby IP clock servers. The IP clock server with a higher priority serves as the active server and the IP clock server with a lower priority serves as the standby server.
NO
No
None
Indicates the type of protocol supported by the IEEE 1588 V2-compliant IP clock link, which can be ITU-T G.8265.1 or IEEE 1588 V2. ITU-T G.8265.1 is defined by the International Telecommunication Union (ITU) for frequency synchronization of an IEEE 1588 V2compliant IP clock link with the NO networking type of UNICAST. An IP clock link in compliant with ITUT G.8265.1 supports interconnection with servers from other vendors. An IP clock link in compliant with IEEE 1588 V2 does not support interconnection with servers from other vendors.
NO
No
None
Indicates the interval at which negotiations are performed between the BS and IP clock NO server. After the interval elapses, the BS initiates another negotiation with the IP clock server.
NO
No
None
Indicates the version of the IP address.
NO
NO
No
None
Indicates the client IPv6 address of the NO IP clock link.
NO
No
None
Indicates the server IPv6 address of the NO IP clock link.
NO
No
None
Indicates the number of the synchronousEthernet clock link. YES Currently, only one link (link No.0) can be configured. Indicates the number of the cabinet where the synchronousEthernet clock link is configured. Indicates the number of the subrack where the synchronousEthernet clock link is configured. Indicates the number of the slot where the synchronousEthernet clock link is configured.
NO
No
None
NO
NO
No
None
NO
NO
No
None
NO
NO
No
None
Indicates the number of the port where the synchronousEthernet clock link is configured. Indicates whether handling of SSM frames is supported. SSM: Synchronization Status Message. Recommendation ITU-T G.8264/Y.1364.
NO
NO
No
None
NO
NO
No
None
Indicates the activation status of a synchronousEthernet clock link. If the link is active, NO the synchronousEthernet clock link is the current clock source of the system. Indicates the availability of a synchronousEthernet clock link. Only an available clock link can serve NO as the current clock source. Otherwise, the clock link cannot be locked even if it is activated. Indicates the priority of the clock source. The value 1 indicates that the current clock source has the highest NO priority, and the value 4 indicates that the current clock source has the lowest priority.
NO
Yes
LOFD-00301301
NO
Yes
LOFD-00301301
NO
No
None
Indicates the availability of the clock source. Only an available clock link can serve as the current clock source. Otherwise, the clock link cannot be locked even if it is activated.
NO
NO
Yes
None
Indicates whether a clock source is licensed to be used. Only a licensed NO clock source can serve as the current clock source. Indicates the priority of the clock source. The value 1 indicates that the current clock source has the highest NO priority, and the value 4 indicates that the current clock source has the lowest priority. Indicates the clock link number of the reference clock source. When this parameter is set to AUTO, the system selects an available clock link from those of the NO specified reference clock source. If there is more than one clock link and the selected clock link fails, another available clock link will be used.
NO
Yes
None
NO
Yes
None
NO
No
None
Indicates the type of the user-selected NO clock source.
NO
No
None
Indicates the working mode of the system clock. Manual indicates that a clock source must be specified by the user. Auto indicates that the system automatically selects a clock source based on NO the priority and availability of the clock source. Free indicates that the system clock works in free-running mode, that is, the system clock does not trace any reference clock source.
NO
No
LBFD-00300501 / TDLBFD-00300501
Indicates the clock synchronization mode of a BS, which can be frequency synchronization or time synchronization.
NO
NO
No
None
Indicates the status of the current clock source, which can be Normal, Lost, Unavailable, Jitter, NO Frequency Deviation, Phaseoutscope, or Inconsistent Clock References.
NO
Yes
None
Indicates the working mode of the clock. It also indicates whether the system clock is stable. The working NO mode of the clock can be Fast tracking, Locked, Holdover, or Free running.
NO
Yes
None
Indicates the clock source in use.
NO
NO
Yes
None
Indicates the number of the cabinet where the system clock is located.
NO
NO
Yes
None
Indicates the number of the subrack where the system clock is located.
NO
NO
Yes
None
Indicates the number of the slot where the system clock is located.
NO
NO
Yes
None
Indicates the clock quality level of the BS. The values for this parameter are listed in quality descending order. NO QL-PRC indicates the highest quality level and QL-DNU indicates the lowest quality level.
NO
No
None
Indicates the cabinet number of the baseband processing board. Indicates the subrack number of the baseband processing board.
YES
NO
No
None
YES
NO
No
None
Indicates the slot number of the baseband processing board.
YES
YES
No
None
Indicates the type of NO the board.
NO
No
None
Indicates the working mode of a baseband processing board. There are five working modes: FDD, TDD, TDD BF, TDD_8T8R, and TDD_TL. FDD is short for Frequency Division Duplex. In FDD mode, the baseband processing board carries traditional voice and data NO services. TDD is short for Time Division Duplex. The value TDD_ENHANCE indicates the TDD mode integrated with the BeamForming (BF) function. The BF function provides the data transmission service in transmission mode 7 and 8 defined in protocols. For Indicates the administrative state of the board. The administrative state of the board can be NO locked, unlocked, or shutting down. For details, see ITU-T X.731. Indicates the scheduled duration NO before a board is blocked.
NO
No
None
NO
No
None
NO
No
None
Indicates the block type of the board. IMMEDIATE (Immediate): indicates that the board is blocked and services carried by the board are interrupted immediately after NO the command is executed. DELAY (Delay): indicates that the board is blocked and services carried by the board are interrupted after a scheduled duration.
NO
No
None
Indicates the alarm status. For details about the definition NO of Alarm Status, see ITU-T X.731.
NO
Yes
None
Indicates the operational state of the board, which can be set to Enabled or Disabled. Enabled indicates that NO services can be carried on the board. Disabled indicates that no service can be carried on the board.
NO
Yes
None
Indicates the physical operation status of the board, which can be Uninstalled, Starting up, Normal, Inconsistent, Unconfigured, Power off, Fault, Communication lost, In test, or the combination of various states. For NO example, if a board is not configured and fails to communicate with the main control and transmission board, the physical operation status of the board is Unconfigured, Communication lost.
NO
Yes
None
Indicates the Elabel, a text file with a maximum of 2 KB. It is used to record the manufacturing NO information about equipment such as the board, subboard, or optical module. Indicates the type of NO the board. Indicates the bar code of the board or NO the cabinet.
NO
Yes
None
NO NO
Yes Yes
None None
Indicates the description about the services and functions provided by the board or the cabinet.
NO
NO
Yes
None
Indicates the manufacturing date NO of the board or the cabinet. Indicates the manufacturer of the NO board or the cabinet. Indicates the issue number of the NO board.
NO
Yes
None
NO
Yes
None
NO
Yes
None
Indicates the type of NO a board.
NO
Yes
None
Indicates the CPU NO or DSP usage. Indicates the object NO number of a board.
NO NO
Yes Yes
None None
Indicates the object type of a board, NO which is CPU or DSP.
NO
Yes
None
Indicates the temperature of a NO board. Indicates the temperature of the NO power amplifier. Indicates the result NO of the operation. Indicates the service type of the CPU or DSP of the board. The service types of the DSP consist of uplink NO and downlink services. The service types of the CPU consist of Master and Slave.
NO
Yes
None
NO NO
Yes Yes
None None
NO
Yes
None
Indicates the type of NO the device.
NO
Yes
None
Indicates the Office name of the BS. Indicates the software version of the board. Indicates the hardware version of the board. Indicates the BootROM version of the board. Indicates the test time. Indicates the test result.
NO NO
NO NO
Yes Yes
None None
NO
NO
Yes
None
NO NO
NO NO
Yes Yes
None None
NO
NO
Yes
None
The downlink and uplink frequencies of the local cell must stay within the same frequency band. Frequency(MHZ) = (Frequency Channel Number / 5) + Offset Band1: Common Frequencies Channel Number: [10562-10838] Offset: 0 Special Frequencies Channel Number: NO none Offset: 0 Band2: Common Frequencies Channel Number: [9662-9938] Offset: 0 Special Frequencies Channel Number: (412, 437, 462, 487, 512, 537, 562, 587, 612, 637, 662, 687) Offset: 1850.1 Band3: Common Frequencies Channel Number: [1162-1513] Offset: 1575 Special
NO
Yes
None
The downlink and uplink frequencies of the local cell must stay within the same frequency band. Frequency(MHZ) = (Frequency Channel Number / 5) + Offset Band1: Common Frequencies Channel Number: [9612-9888] Offset: 0 Special Frequencies Channel Number: NO none Offset: 0 Band2: Common Frequencies Channel Number: [9262-9538] Offset: 0 Special Frequencies Channel Number: (12, 37, 62, 87, 112, 137, 162, 187, 212, 237, 262, 287) Offset: 1850.1 Band3: Common Frequencies Channel Number: [937-1288] Offset: 1525 Special Indicates the number of the cabinet where the YES BBU FAN unit is located. Indicates the number of the subrack where the BBU FAN unit is located.
NO
Yes
None
NO
No
None
YES
NO
No
None
Indicates the number of the slot YES where the BBU FAN unit is located. Indicates the current temperature NO of the BBU FAN unit.
YES
No
None
NO
Yes
None
Indicates the rotation speed of a fan in the BBU, which is the ratio of NO the current rotation speed of the fan to its maximum rotation speed.
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO NO
Yes Yes
None None
NO
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO NO
Yes Yes
None None
NO
Yes
None
NO
Yes
None
NO NO
Yes Yes
None None
NO
Yes
None
NO
Yes
None
NO NO
NO NO
Yes Yes
None None
NO
NO
Yes
None
NO NO
NO NO
Yes Yes
None None
NO
NO
Yes
None
NO
Yes
None
The downlink and uplink frequencies of the local cell must stay within the same frequency band. Frequency(MHZ) = (Frequency Channel Number / 5) + Offset Band1: Common Frequencies Channel Number: [9612-9888] Offset: 0 Special Frequencies Channel Number: NO none Offset: 0 Band2: Common Frequencies Channel Number: [9262-9538] Offset: 0 Special Frequencies Channel Number: (12, 37, 62, 87, 112, 137, 162, 187, 212, 237, 262, 287) Offset: 1850.1 Band3: Common Frequencies Channel Number: [937-1288] Offset: 1525 Special Indicates the cabinet number of the CCU.
NO
Yes
None
YES
YES
No
None
Indicates the subrack number of the CCU.
YES
NO
No
None
Indicates the slot YES number of the CCU.
NO
No
None
Indicates the cabinet number of NO the manager unit of the CCU. Indicates the subrack number of NO the manager unit of the CCU. Indicates the number of the serial NO port to which the CCU is connected. Indicates whether the CCU is directly connected to its NO manager unit, which is a BBU. Indicates the position of the CCU NO on a CCU chain. Indicates the working standard of the manager unit to NO which the CCU is connected. Indicates whether to allow the report of a dedicated Boolean alarm. If the shield NO flag for a Boolean alarm is enabled, the Boolean alarm cannot be reported. Indicates the connecting status of NO the port on the left of the CCU. Indicates the connecting status of the port on the right of the CCU. Indicates the software version of the CCU. Indicates the PCB version of the CCU. Indicates the erasable programmable logic device (EPLD) version of the CCU. NO
NO
No
None
NO
No
None
NO
No
None
NO
No
None
YES
No
None
NO
No
None
NO
No
None
NO
Yes
None
NO
Yes
None
NO NO
NO NO
Yes Yes
None None
NO
NO
Yes
None
Indicates the ID of YES the RRU chain/ring. Indicates the current Common Public Radio Interface (CPRI) NO line rate at the head of the RRU chain/ring. Indicates the negotiation state of the Common Public Radio Interface (CPRI) port, which can be NOTREADY(Not ready), NEGOTIATING(Ne gotiating), NEGOTIATED(Neg otiated), TIMEOUT(Timeout) , or USERCONFIG(US ERCONFIG). The value NO NOTREADY(Not ready) indicates that the rate negotiation has not been started. The value NEGOTIATING(Ne gotiating) indicates that the rate is being negotiated. The value NEGOTIATED(Neg otiated) indicates that the rate negotiation is complete. The value TIMEOUT(Timeout) indicates that the Indicates the current Common Public Radio NO Interface (CPRI) line rate at the tail of the RRU chain/ring.
NO
No
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
Indicates the negotiation state at the tail of the CPRI ring, which can be NOTREADY(Not ready), NEGOTIATING(Ne gotiating), NEGOTIATED(Neg otiated), TIMEOUT(Timeout) , or USERCONFIG(US ERCONFIG). The value NOTREADY(Not ready) indicates that the rate negotiation has not been started. The value NEGOTIATING(Ne gotiating) indicates that the rate is being negotiated. The value NEGOTIATED(Neg otiated) indicates that the rate negotiation is complete. The value TIMEOUT(Timeout) indicates that the rate negotiation timed out due to a Indicates the cabinet number. Indicates the subrack number. Indicates the slot number. Indicates the number of an RRU carried on the RRU chain/ring. The RRUs are numbered from 0 in ascending order. If the RRU chain is connected to the ports located on the baseband processing boards, the first port is the head of the chain, and the last port is the tail of the chain.
NO
NO
Yes
None
NO NO NO
NO NO NO
Yes Yes Yes
None None None
NO
NO
Yes
None
Indicates the maximum bit rate at the Common Public Radio Interface (CPRI) port. If the maximum bit rate is NULL, the RF NO module or baseband interface board does not support the rate negotiation, or the rate negotiation fails.
NO
Yes
None
Indicates the cabinet number of the board where the CPRI port is located. This parameter is configured automatically when the CPRI port is created. A CPRI YES port is created automatically when a BBP is added by running the ADD BRD command. The CPRI port is used for the configuration check when an RRU chain/ring is added.
NO
No
None
Indicates the subrack number of the board where the CPRI port is located. This parameter is configured automatically when the CPRI port is created. A CPRI YES port is created automatically when a BBP is added by running the ADD BRD command. The CPRI port is used for the configuration check when an RRU chain/ring is added.
NO
No
None
Indicates the slot number of the board where the CPRI port is located. This parameter is configured automatically when the CPRI port is created. A CPRI port is created YES automatically when a BBP is added by running the ADD BRD command. The CPRI port is used for the configuration check when an RRU chain/ring is added.
YES
No
None
Indicates the optical port number of the board where the CPRI port is located. This parameter is configured automatically when the CPRI port is created. A CPRI YES port is created automatically when a BBP is added by running the ADD BRD command. The CPRI port is used for the configuration check when an RRU chain/ring is added.
YES
No
None
Indicates the rate at NO the CPRI port.
NO
Yes
None
Indicates the administrative state of the CPRI port. When the CPRI port is locked, it indicates that a breakpoint is configured on the RRU chain/ring. At this moment, although the optical cables are connected, the NO CPRI link is disconnected. The breakpoint is configured to prevent temporary alarms from being reported during network operations. When the CPRI port is unlocked, it indicates that there is no breakpoint on the RRU chain/ring.
NO
Yes
None
Indicates the inposition state of the NO CPRI port. Indicates the mode of the CPRI port. There are two NO modes: Maser and Slave.
NO
Yes
None
NO
Yes
None
Indicates the type of NO the CPRI port.
NO
Yes
None
Indicates the backup mode of the CPRI port. Indicates the channel type of the CPRI port. Indicates the DL bandwidth of the CPRI port. Indicates the number of downlink connections of the CPRI port. Indicates the number of uplink connections of the CPRI port. Indicates the Mux Status of the CPRI port.
NO
NO
Yes
None
NO
NO
Yes
None
NO
NO
Yes
None
NO
NO
Yes
None
NO
NO
Yes
None
NO
NO
Yes
None
Indicates the power consumption NO measurement point of the BS. Indicates the cabinet number of the main control and transmission board. Indicates the subrack number of the main control and transmission board.
NO
No
None
YES
NO
No
None
YES
NO
No
None
Indicates the slot number of the main YES control and transmission board. Indicates the type of NO the board.
YES
No
None
YES
No
None
Indicates the active or standby status of the main control and transmission board. The active or standby status is NO available only to the main control and transmission board. This parameter for other types of board is set to NULL.
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO NO
Yes Yes
None None
NO
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO NO
Yes Yes
None None
NO
Yes
None
NO
Yes
None
NO NO
Yes Yes
None None
NO
Yes
None
NO
Yes
None
NO NO
NO NO
Yes Yes
None None
NO
NO
Yes
None
NO NO
NO NO
Yes Yes
None None
NO
NO
Yes
None
NO
Yes
None
The downlink and uplink frequencies of the local cell must stay within the same frequency band. Frequency(MHZ) = (Frequency Channel Number / 5) + Offset Band1: Common Frequencies Channel Number: [9612-9888] Offset: 0 Special Frequencies Channel Number: NO none Offset: 0 Band2: Common Frequencies Channel Number: [9262-9538] Offset: 0 Special Frequencies Channel Number: (12, 37, 62, 87, 112, 137, 162, 187, 212, 237, 262, 287) Offset: 1850.1 Band3: Common Frequencies Channel Number: [937-1288] Offset: 1525 Special Indicates the number of the YES cabinet where the PEU is located. Indicates the number of the subrack where the PEU is located. YES
NO
Yes
None
NO
No
None
NO
No
None
Indicates the number of the slot YES where the PEU is located. Indicates the spare NO power of the UPEU. Indicates the spare NO power of the BBU.
YES
No
None
NO NO
Yes Yes
None None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO NO
Yes Yes
None None
NO
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO NO
Yes Yes
None None
NO
Yes
None
NO
Yes
None
NO NO
Yes Yes
None None
NO
Yes
None
NO
Yes
None
NO NO
NO NO
Yes Yes
None None
NO
NO
Yes
None
NO NO
NO NO
Yes Yes
None None
NO
NO
Yes
None
NO
Yes
None
The downlink and uplink frequencies of the local cell must stay within the same frequency band. Frequency(MHZ) = (Frequency Channel Number / 5) + Offset Band1: Common Frequencies Channel Number: [9612-9888] Offset: 0 Special Frequencies Channel Number: NO none Offset: 0 Band2: Common Frequencies Channel Number: [9262-9538] Offset: 0 Special Frequencies Channel Number: (12, 37, 62, 87, 112, 137, 162, 187, 212, 237, 262, 287) Offset: 1850.1 Band3: Common Frequencies Channel Number: [937-1288] Offset: 1525 Special Indicates whether the PSU intelligent shutdown switch in NO a BS is enabled or disabled. Indicates the cabinet number of the optical or electrical module. Indicates the subrack number of the optical or electrical module. Indicates the slot number of the optical or electrical module. YES
NO
Yes
None
NO
No
None
YES
No
None
YES
YES
No
None
YES
YES
No
None
Indicates the number of the optical or electrical module. If a UCIU is queried, values 0 to 4 indicate the ports M0 to M4 on the board panel, and value 8 indicates the port S0 on the YES board panel. If a UMPT is queried, value 8 indicates the port CI on the board panel. If a LBBPd board is queried, value 6 indicates the port HEI on the board panel. Indicates whether the optical or NO electrical module is in position.
YES
No
None
NO
Yes
None
Indicates the type of the optical or electrical module, which can be SFP, enhanced SFP, or electrical port. These three types are different in the supported transmission rates and transmission distance. The transmission distance of the electrical port is short, so it is used NO to connect the BBU or RFU. The Small Form-factor Pluggable (SFP) is a small hotswappable module, which can be connected to an optical module or an electrical module. The difference between the enhanced SFP and SFP is the supported transmission rates. Indicates the manufacturer of the NO optical or electrical module. Indicates the transmission mode of the optical NO module, that is, single-mode or multimode. Indicates the wavelength of the NO optical module. Indicates the transmission code NO rate of the optical or electrical module.
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
Indicates the maximum distance that signals from the optical module can travel along a singlemode optical fiber with a 9-micrometer NO core diameter. The value 0 indicates that the optical module does not support this type of optical fiber. Indicates the maximum distance that signals from the optical module can travel along a singlemode optical fiber with a 9-micrometer NO core diameter. The value 0 indicates that the optical module does not support this type of optical fiber. Indicates the maximum distance that signals from the optical module can travel along a multimode optical fiber with a 50NO micrometer core diameter. The value 0 indicates that the optical module does not support this type of optical fiber. Indicates the maximum distance that signals from the optical module can travel along a multimode optical fiber with a 62.5NO micrometer core diameter. The value 0 indicates that the optical module does not support this type of optical fiber.
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
Indicates the observed temperature of the optical module. This NO parameter is valid only when the optical module type is ESFP. Indicates the observed voltage of the optical module. This parameter is NO valid only when the optical module type is ESFP. Indicates the observed current of the optical module. This parameter is NO valid only when the optical module type is ESFP. Indicates the TX optical power of the optical module. This parameter is valid NO only when the optical module type is ESFP. Indicates the RX optical power of the optical module. This parameter is valid NO only when the optical module type is ESFP. Indicates the transmission distance of the electrical module.
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
NO
Yes
None
Indicates the cabinet number of YES the extension transmission board. Indicates the subrack number of YES the extension transmission board. Indicates the slot number of the YES extension transmission board.
NO
No
None
NO
No
None
YES
No
None
Indicates the type of NO the sub-board. Indicates the active or standby status of the extended NO transmission processing board.
YES
No
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO NO
Yes Yes
None None
NO
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO NO
Yes Yes
None None
NO
Yes
None
NO
Yes
None
NO NO
Yes Yes
None None
NO
Yes
None
NO
Yes
None
NO NO
NO NO
Yes Yes
None None
NO
NO
Yes
None
NO NO
NO NO
Yes Yes
None None
NO
NO
Yes
None
NO
Yes
None
The downlink and uplink frequencies of the local cell must stay within the same frequency band. Frequency(MHZ) = (Frequency Channel Number / 5) + Offset Band1: Common Frequencies Channel Number: [9612-9888] Offset: 0 Special Frequencies Channel Number: none Offset: 0 Band2: Common Frequencies Channel Number: [9262-9538] Offset: 0 Special Frequencies Channel Number: (12, 37, 62, 87, 112, 137, 162, 187, 212, 237, 262, 287) Offset: 1850.1 Band3: Common Frequencies Channel Number: [937-1288] Offset: 1525 Special Indicates the cabinet number of the UCIU. Indicates the subrack number of the UCIU. Indicates the slot number of the UCIU.
NO
NO
Yes
None
YES
YES
No
None
YES YES
YES YES
No No
None None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO NO
Yes Yes
None None
NO
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO NO
Yes Yes
None None
NO
Yes
None
NO
Yes
None
NO NO
Yes Yes
None None
NO
Yes
None
NO
Yes
None
NO NO
NO NO
Yes Yes
None None
NO
NO
Yes
None
NO NO
NO NO
Yes Yes
None None
NO
NO
Yes
None
NO
Yes
None
The downlink and uplink frequencies of the local cell must stay within the same frequency band. Frequency(MHZ) = (Frequency Channel Number / 5) + Offset Band1: Common Frequencies Channel Number: [9612-9888] Offset: 0 Special Frequencies Channel Number: NO none Offset: 0 Band2: Common Frequencies Channel Number: [9262-9538] Offset: 0 Special Frequencies Channel Number: (12, 37, 62, 87, 112, 137, 162, 187, 212, 237, 262, 287) Offset: 1850.1 Band3: Common Frequencies Channel Number: [937-1288] Offset: 1525 Special Indicates the number of the YES cabinet where the UEIU is located. Indicates the number of the subrack where the UEIU is located. Indicates the number of the slot where the UEIU is located. YES
NO
Yes
None
NO
No
None
NO
No
None
YES
YES
No
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO NO
Yes Yes
None None
NO
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO NO
Yes Yes
None None
NO
Yes
None
NO
Yes
None
NO NO
Yes Yes
None None
NO
Yes
None
NO
Yes
None
NO NO
NO NO
Yes Yes
None None
NO
NO
Yes
None
NO NO
NO NO
Yes Yes
None None
NO
NO
Yes
None
NO
Yes
None
The downlink and uplink frequencies of the local cell must stay within the same frequency band. Frequency(MHZ) = (Frequency Channel Number / 5) + Offset Band1: Common Frequencies Channel Number: [9612-9888] Offset: 0 Special Frequencies Channel Number: NO none Offset: 0 Band2: Common Frequencies Channel Number: [9262-9538] Offset: 0 Special Frequencies Channel Number: (12, 37, 62, 87, 112, 137, 162, 187, 212, 237, 262, 287) Offset: 1850.1 Band3: Common Frequencies Channel Number: [937-1288] Offset: 1525 Special Indicates the number of the YES cabinet where the USCU is located. Indicates the number of the subrack where the USCU is located. YES
NO
Yes
None
NO
No
None
NO
No
None
Indicates the number of the slot YES where the USCU is located.
YES
No
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO NO
Yes Yes
None None
NO
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO NO
Yes Yes
None None
NO
Yes
None
NO
Yes
None
NO NO
Yes Yes
None None
NO
Yes
None
NO
Yes
None
NO NO
NO NO
Yes Yes
None None
NO
NO
Yes
None
NO NO
NO NO
Yes Yes
None None
NO
NO
Yes
None
NO
Yes
None
The downlink and uplink frequencies of the local cell must stay within the same frequency band. Frequency(MHZ) = (Frequency Channel Number / 5) + Offset Band1: Common Frequencies Channel Number: [9612-9888] Offset: 0 Special Frequencies Channel Number: NO none Offset: 0 Band2: Common Frequencies Channel Number: [9262-9538] Offset: 0 Special Frequencies Channel Number: (12, 37, 62, 87, 112, 137, 162, 187, 212, 237, 262, 287) Offset: 1850.1 Band3: Common Frequencies Channel Number: [937-1288] Offset: 1525 Special Indicates the deployment ID. The parameter value can contain digits, letters, left parenthesis ((), right NO parenthesis ()), underlines (_), dots (.), ampersands (&), is less than (<), and is greater than (>). Indicates the battery intelligent management switch status. Intelligent battery power NO management prolongs the lifespan of a battery using the floating charge mode.
NO
Yes
None
NO
No
None
NO
No
None
Whether to allow the generation of the Power Lose Redundancy alarm. The PSUs needs to be configured in N+1 backup mode. When this NO parameter is set to "YES", the BTS reports the Power Lose Redundancy alarm if the PSUs are not configured in N+1 mode.
NO
No
None
Indicates the special alarm status of the NE. The status is set to NO TESTING by default by the manufacturers.
NO
No
None
Indicates the start time of special alarm status of the NE. If the start time NO is not specified, the special alarm status takes effect immediately.
NO
No
None
Indicates the end time of special alarm status of the NE.
NO
NO
No
None
Indicates the remarks of special alarm status of the NE.
NO
YES
No
None
Indicates the current maintenance mode NO of the network element (NE).
NO
Yes
None
Indicates the direct voltage alarm switch. The switch controls whether to report the ALMNO 26113 Base Station DC Power Supply Abnormal in the case of low voltage.
NO
No
None
Indicates the DC voltage alarm occured threshold. When the load voltage is lower than the DC voltage alarm occured threshold and the NO direct voltage alarm switch is set to ENABLE, an ALM26113 Base Station DC Power Supply Abnormal is reported. Indicates the DC voltage alarm restored threshold. When the load voltage is higher than the DC voltage alarm restored threshold and the NO direct voltage alarm switch is set to ENABLE, an ALM26113 Base Station DC Power Supply Abnormal is cleared.
NO
No
None
NO
No
None
Indicates the cabinet number.
YES
YES
No
None
Type of a cabinet. This parameter is set to VIRTUAL when the type of a NO cabinet is not within the value range of this parameter.
NO
No
None
Indicates a brief description of the cabinet, which can be the function, NO location, and some other information of the cabinet. Indicates the cabinet type. NO
NO
No
None
NO
Yes
None
Indicates the cabinet number of the subrack.
YES
YES
No
None
Indicates the number of the subrack.
YES
YES
No
None
Indicates the type of NO the subrack.
YES
No
None
Indicates a brief description of the subrack, which can be the function, NO location, and some other information of the subrack.
NO
No
None
Indicates the type of power supply to the NO subrack.
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO NO
Yes Yes
None None
NO
Yes
None
NO
Yes
None
NO NO
Yes Yes
None None
NO
Yes
None
NO
Yes
None
NO NO
NO NO
Yes Yes
None None
NO
NO
Yes
None
NO NO
NO NO
Yes Yes
None None
NO
NO
Yes
None
NO
Yes
None
The downlink and uplink frequencies of the local cell must stay within the same frequency band. Frequency(MHZ) = (Frequency Channel Number / 5) + Offset Band1: Common Frequencies Channel Number: [9612-9888] Offset: 0 Special Frequencies Channel Number: NO none Offset: 0 Band2: Common Frequencies Channel Number: [9262-9538] Offset: 0 Special Frequencies Channel Number: (12, 37, 62, 87, 112, 137, 162, 187, 212, 237, 262, 287) Offset: 1850.1 Band3: Common Frequencies Channel Number: [937-1288] Offset: 1525 Special Indicates the number of the cabinet where the EMU is located.
NO
Yes
None
YES
NO
No
None
Indicates the number of the subrack where the EMU is located.
YES
NO
No
None
Indicates the number of the slot where the EMU is located.
YES
NO
No
None
Indicates the cabinet number of the manager that manages the EMU. NO The manager of the EMU is usually a BBU or RRU.
NO
No
LBFD-004012 / TDLBFD-004012
Indicates the subrack number of the manager. The manager of the EMU is usually a BBU or RRU.
NO
NO
No
LBFD-004012 / TDLBFD-004012
Indicates the number of the serial NO port to which the EMU is connected.
YES
No
LBFD-004012 / TDLBFD-004012
Indicates the communication address of the EMU, which is determined by the settings of the 4-bit dual in-line package (DIP) switch on the EMU. The communication address is used by the EMU to communicate with the main control and transmission board. The value of this parameter must NO be consistent with the actual settings of the DIP switch. The 4-bit DIP switch can be treated as a 4-bit binary number. The settings of ON and OFF are represented by 1 and 0 respectively. Convert the 4-bit number from binary to decimal, and then the decimal number is used as the value of this parameter. Indicates the lower limit of temperature. When the temperature is below the lower NO limit, an ALM-25650 Temperature Abnormal alarm is reported. Indicates the upper limit of temperature. When the temperature exceeds the upper NO limit, an ALM-25650 Temperature Abnormal alarm is reported.
NO
No
LBFD-004012 / TDLBFD-004012
NO
No
LBFD-004012 / TDLBFD-004012
NO
No
LBFD-004012 / TDLBFD-004012
Indicates the lower limit of humidity. When the humidity is below the lower NO limit, an ALM-25651 Humidity Abnormal alarm is reported. Indicates the upper limit of humidity. When the humidity exceeds the upper NO limit, an ALM-25651 Humidity Abnormal alarm is reported.
NO
No
LBFD-004012 / TDLBFD-004012
NO
No
LBFD-004012 / TDLBFD-004012
Indicates whether to allow the report of a dedicated analog alarm. If the shield NO flag for an analog alarm is enabled, the analog alarm cannot be reported.
NO
No
LBFD-004012 / TDLBFD-004012
Indicates whether to allow the report of a dedicated Boolean alarm. If the shield NO flag for a Boolean alarm is enabled, the Boolean alarm cannot be reported.
NO
No
LBFD-004012 / TDLBFD-004012
Indicates the current temperature NO of the environment. Indicates the NO ambient humidity. Indicates the -48 V input voltage from NO the power supply cabinet.
NO NO
Yes Yes
LBFD-004012 / TDLBFD-004012 LBFD-004012 / TDLBFD-004012 LBFD-004012 / TDLBFD-004012
NO
Yes
Indicates the current value measured by the NO external sensor that is connected to analog port 1. Indicates the current value measured by the NO external sensor that is connected to analog port 2. Indicates the current value measured by the NO external sensor that is connected to analog port 3. Indicates the current value measured by the NO external sensor that is connected to analog port 4.
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
Indicates the Elabel, a text file with a maximum of 2 KB. It is used to record the manufacturing NO information about equipment such as the board, subboard, or optical module. Indicates the type of NO the board. Indicates the bar code of the board or NO the cabinet. Indicates the description about the services and functions provided by the board or the cabinet.
NO
Yes
None
NO NO
Yes Yes
None None
NO
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO NO
Yes Yes
None None
NO
Yes
None
Indicates the temperature of a NO board. Indicates the temperature of the NO power amplifier. Indicates the result NO of the operation.
NO
Yes
None
NO NO
Yes Yes
None None
Indicates the service type of the CPU or DSP of the board. The service types of the DSP consist of uplink NO and downlink services. The service types of the CPU consist of Master and Slave.
NO
Yes
None
NO
Yes
None
NO NO
NO NO
Yes Yes
None None
NO
NO
Yes
None
NO NO
NO NO
Yes Yes
None None
NO
NO
Yes
None
NO
Yes
None
The downlink and uplink frequencies of the local cell must stay within the same frequency band. Frequency(MHZ) = (Frequency Channel Number / 5) + Offset Band1: Common Frequencies Channel Number: [9612-9888] Offset: 0 Special Frequencies Channel Number: NO none Offset: 0 Band2: Common Frequencies Channel Number: [9262-9538] Offset: 0 Special Frequencies Channel Number: (12, 37, 62, 87, 112, 137, 162, 187, 212, 237, 262, 287) Offset: 1850.1 Band3: Common Frequencies Channel Number: [937-1288] Offset: 1525 Special Indicates the number of the cabinet where the FMU is located.
NO
Yes
None
YES
NO
No
None
Indicates the number of the subrack where the FMU is located.
YES
NO
No
None
Indicates the number of the slot where the FMU is located.
YES
NO
No
None
Indicates the cabinet number of the manager. The manager of the FMU is usually a BBU or RRU.
NO
NO
No
LBFD-004012 / TDLBFD-004012
Indicates the subrack number of the manager. The manager of the FMU is usually a BBU or RRU.
NO
NO
No
LBFD-004012 / TDLBFD-004012
Indicates the number of the serial NO port where the FMU is connected.
YES
No
LBFD-004012 / TDLBFD-004012
Indicates the communication address of the FMU. The FMU communicates with NO the main control and transmission board by using this communication address.
NO
No
LBFD-004012 / TDLBFD-004012
Indicates whether to allow the report of a dedicated Boolean alarm. If the shield NO flag for a Boolean alarm is enabled, the Boolean alarm cannot be reported. Indicates the ratio of the current rotation speed of the fan to NO its maximum rotation speed. Indicates the temperature at the NO air outlet of the FMU. Indicates the temperature at the NO air inlet of the FMU. Indicates the average rotation NO speed of the fan per minute. Indicates the switch of smart temperature control. When the smart temperature control is enabled, the rotation speed of the fan is adjusted by the FMU according to the temperature control NO parameters delivered by the BBU. When the smart temperature control is disabled, the rotation speed of the fan is adjusted by the FMU automatically according to the temperature.
NO
No
None
NO
Yes
LBFD-004012 / TDLBFD-004012
NO
Yes
NO
Yes
NO
Yes
NO
No
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO NO
Yes Yes
None None
NO
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO NO
Yes Yes
None None
NO
Yes
None
NO
Yes
None
NO NO
Yes Yes
None None
NO
Yes
None
NO
Yes
None
NO NO
NO NO
Yes Yes
None None
NO
NO
Yes
None
NO NO
NO NO
Yes Yes
None None
NO
NO
Yes
None
NO
Yes
None
The downlink and uplink frequencies of the local cell must stay within the same frequency band. Frequency(MHZ) = (Frequency Channel Number / 5) + Offset Band1: Common Frequencies Channel Number: [9612-9888] Offset: 0 Special Frequencies Channel Number: NO none Offset: 0 Band2: Common Frequencies Channel Number: [9262-9538] Offset: 0 Special Frequencies Channel Number: (12, 37, 62, 87, 112, 137, 162, 187, 212, 237, 262, 287) Offset: 1850.1 Band3: Common Frequencies Channel Number: [937-1288] Offset: 1525 Special Indicates the number of the cabinet where the TCU is located.
NO
Yes
None
YES
NO
No
None
Indicates the number of the subrack where the TCU is located.
YES
NO
No
None
Indicates the number of the slot where the TCU is located.
YES
NO
No
None
Indicates the cabinet number of the manager. The manager of the TCU is usually a BBU or RRU.
NO
NO
No
LBFD-004012 / TDLBFD-004012
Indicates the subrack number of the manager. The manager of the TCU is usually a BBU or RRU.
NO
NO
No
LBFD-004012 / TDLBFD-004012
Indicates the number of the serial NO port where the TCU is connected.
YES
No
LBFD-004012 / TDLBFD-004012
Indicates the communication address of the TCU. The TCU communicates with NO the main control and transmission board by using this communication address.
NO
No
LBFD-004012 / TDLBFD-004012
Indicates the lower threshold of the temperature. If the cabinet air outlet temperature is lower than the value, the NO ALM-25655 Cabinet Air Outlet Temperature Unacceptable is reported. Indicates the upper threshold of the temperature. If the cabinet air outlet temperature is higher than the NO value, the ALM25655 Cabinet Air Outlet Temperature Unacceptable is reported. Indicates whether to allow the report of a dedicated Boolean alarm. If the shield NO flag for a Boolean alarm is enabled, the Boolean alarm cannot be reported. Indicates the device type of the TCU. Indicates the temperature at the air inlet of the TCU. Indicates the temperature at the air outlet of the TCU. Indicates the temperature inside the TCU. Indicates the average rotation speed of the inner circulation fan per minute. Indicates the average rotation speed of the outer circulation fan per minute. NO NO
NO
No
LBFD-004012 / TDLBFD-004012
NO
No
LBFD-004012 / TDLBFD-004012
NO
No
None
NO NO
Yes Yes
None LBFD-004012 / TDLBFD-004012 LBFD-004012 / TDLBFD-004012 LBFD-004012 / TDLBFD-004012
NO
NO
Yes
NO
NO
Yes
NO
NO
Yes
None
NO
NO
Yes
None
Indicates the current heating power of the TCU. If this parameter is displayed as 0, the TCU is not heating the cabinet. If this parameter is not displayed as 0, the NO TCU is heating the cabinet. If this parameter is displayed as NULL, the TCU used for heating does not exist or is not supported. Indicates the software version of the TCU. Indicates the PCB version of the TCU. Indicates the erasable programmable logic device (EPLD) version of the TCU. Indicates the compiling time of the software program in the TCU. Indicates the version description of the TCU. Indicates the manufacturing date of the TCU. NO NO
NO
Yes
None
NO NO
Yes Yes
None None
NO
NO
Yes
None
NO
NO
Yes
None
NO
NO
Yes
None
NO
NO
Yes
None
Indicates the manufacturer of the NO TCU.
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO NO
Yes Yes
None None
NO
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO NO
Yes Yes
None None
NO
Yes
None
NO
Yes
None
NO NO
Yes Yes
None None
NO
Yes
None
NO
Yes
None
NO NO
NO NO
Yes Yes
None None
NO
NO
Yes
None
NO NO
NO NO
Yes Yes
None None
NO
NO
Yes
None
NO
Yes
None
The downlink and uplink frequencies of the local cell must stay within the same frequency band. Frequency(MHZ) = (Frequency Channel Number / 5) + Offset Band1: Common Frequencies Channel Number: [9612-9888] Offset: 0 Special Frequencies Channel Number: NO none Offset: 0 Band2: Common Frequencies Channel Number: [9262-9538] Offset: 0 Special Frequencies Channel Number: (12, 37, 62, 87, 112, 137, 162, 187, 212, 237, 262, 287) Offset: 1850.1 Band3: Common Frequencies Channel Number: [937-1288] Offset: 1525 Special Indicates the number of the YES cabinet where the TCU is located. Indicates the number of the subrack where the TCU is located. Indicates the number of the slot where the TCU is located. YES
NO
Yes
None
NO
No
None
NO
No
None
YES
NO
No
None
Indicates the threshold of the low NO temperature state. Indicates the threshold of the high temperature state.
NO
No
LBFD-004012 / TDLBFD-004012
NO
NO
No
LBFD-004012 / TDLBFD-004012
Indicates the expected lowest temperature at the air outlet.
NO
NO
No
LBFD-004012 / TDLBFD-004012
Indicates the tolerable error value NO of temperature control. Indicates the difference between the temperature at the air inlet and that NO of the environment at the normal temperature. Indicates the difference between the temperature at the air outlet and NO that of the air inlet at the normal temperature. Indicates the difference between the temperature at the air outlet and NO that of the environment at the high temperature. Indicates the number of the cabinet where the PMU is located.
NO
No
LBFD-004012 / TDLBFD-004012
NO
No
LBFD-004012 / TDLBFD-004012
NO
No
LBFD-004012 / TDLBFD-004012
NO
No
LBFD-004012 / TDLBFD-004012
YES
NO
No
None
Indicates the number of the subrack where the PMU is located.
YES
NO
No
None
Indicates the number of the slot where the PMU is located. Indicates the cabinet number of the manager. The manager of the PMU is usually a BBU or RRU.
YES
NO
No
None
NO
NO
No
LBFD-004012 / TDLBFD-004012
Indicates the subrack number of the manager. The manager of the PMU is usually a BBU or RRU.
NO
NO
No
LBFD-004012 / TDLBFD-004012
Indicates the number of the serial NO port where the PMU is connected.
YES
No
LBFD-004012 / TDLBFD-004012
Indicates the communication address of the PMU, which is determined by the settings of the 4-bit dual in-line package (DIP) switch on the PMU. The communication address is used by the PMU to communicate with the main control and transmission board. The value of this parameter must NO be consistent with the actual settings of the DIP switch. The 4-bit DIP switch can be treated as a 4-bit binary number. The settings of ON and OFF are represented by 1 and 0 respectively. Convert the 4-bit number from binary to decimal, and then the decimal number is used as the value of this parameter.
NO
No
LBFD-004012 / TDLBFD-004012
Indicates the type of the power system NO for the PMU.
NO
No
LBFD-004012 / TDLBFD-004012
Indicates the lower threshold of AC input voltage. When the AC input voltage is lower than the NO value, an ALM25622 Mains Input Abnormal alarm is reported. Indicates the higher threshold of AC input voltage. When the AC input voltage is higher than the NO value, an ALM25622 Mains Input Abnormal alarm is reported.
NO
No
LBFD-004012 / TDLBFD-004012
NO
No
LBFD-004012 / TDLBFD-004012
Indicates the lower threshold of the DC voltage. When the output voltage of the busbar is lower NO than the value, an ALM-25621 DC Output Abnormal alarm is reported.
NO
No
LBFD-004012 / TDLBFD-004012
Indicates the upper threshold of the DC voltage. When the output voltage of the busbar is higher NO than the value, an ALM-25621 DC Output Abnormal alarm is reported.
NO
No
LBFD-004012 / TDLBFD-004012
Indicates the flag for power-off against low voltage, which determines whether NO the load is powered off in the case of low voltage.
NO
No
LBFD-004012 / TDLBFD-004012
Indicates the load voltage below which the load is powered off automatically NO when load power-off against low voltage is enabled.
NO
No
LBFD-004012 / TDLBFD-004012
Indicates the lower threshold of the cabinet temperature. If the cabinet temperature is lower than the NO value, an ALM25652 Cabinet Temperature Abnormal alarm is reported.
NO
No
LBFD-004012 / TDLBFD-004012
Indicates the upper threshold of the cabinet temperature. If the cabinet temperature is higher than the NO value, an ALM25652 Cabinet Temperature Abnormal alarm is reported. Indicates the lower threshold of the cabinet humidity. If the cabinet humidity is lower than the NO value, an ALM25653 Cabinet Humidity Abnormal alarm is reported. Indicates the upper threshold of the cabinet humidity. If the cabinet humidity is higher than the NO value, an ALM25653 Cabinet Humidity Abnormal alarm is reported.
NO
No
LBFD-004012 / TDLBFD-004012
NO
No
None
NO
No
None
Indicates whether to allow the report of a dedicated analog alarm. If the shield NO flag for an analog alarm is enabled, the analog alarm cannot be reported.
NO
No
LBFD-004012 / TDLBFD-004012
Indicates whether to allow the report of a dedicated Boolean alarm. If the shield NO flag for a Boolean alarm is enabled, the Boolean alarm cannot be reported.
NO
No
LBFD-004012 / TDLBFD-004012
Indicates the current AC voltage, that is, the input NO mains voltage to the rectifier. Indicates the DC output voltage of the busbar. Indicates the total load current. Indicates the current cabinet temperature of the cabinet. Indicates the ambient humidity of the cabinet. NO NO
NO
Yes
LBFD-004012 / TDLBFD-004012
NO NO
Yes Yes
LBFD-004012 / TDLBFD-004012 LBFD-004012 / TDLBFD-004012 LBFD-004012 / TDLBFD-004012 LBFD-004012 / TDLBFD-004012
NO
NO
Yes
NO
NO
Yes
Indicates the poweron status of the secondary load. The secondary load can be set to automatically powered off in the following modes: HighTemperaturePo werOff(High NO temperature power off), LowTemperaturePo werOff(Low temperature power off), and LowVoltagePowerO ff(Low voltage power off).
NO
Yes
LBFD-004012 / TDLBFD-004012
Indicates the charging or discharging status of batteries. Boost charge is used to quickly recover the capacity of the battery. During the boost charge, the charging voltage is relatively high. After the battery is discharged, generally, the system automatically starts boost-charge on the NO battery. Floating charge is used to compensate for the power loss of the battery due to selfdischarge and to keep the capacity of the battery. It can also recover the battery capacity. During the floating charge, the charging voltage is relatively low. Force boost charge is an enhanced mode of the boost charge. Indicates the charging or NO discharging current of batteries. Indicates whether the batteries that are being charged are in the current limiting status.
NO
Yes
LBFD-004012 / TDLBFD-004012
NO
Yes
LBFD-004012 / TDLBFD-004012
NO
NO
Yes
LBFD-004012 / TDLBFD-004012
Indicates the poweron/power-off status of the battery. The battery can be disconnected manually or NO disconnected automatically for protection purpose based on different situations.
NO
Yes
LBFD-004012 / TDLBFD-004012
Indicates the remaining capacity of the battery by displaying the percentage of the current capacity to the total capacity.
NO
NO
Yes
LBFD-004012 / TDLBFD-004012
Indicates the current temperature NO of the battery.
NO
Yes
LBFD-004012 / TDLBFD-004012
Indicates the phase NO of the battery test.
NO
Yes
None
Indicates the total current of the NO photovoltaic array of the PMU. Indicates the current of the diesel generator which is NO managed by the PMU. Indicates the temperature of auxiliary battery cabinet which is connected to the PMU.
NO
Yes
None
NO
Yes
None
NO
NO
Yes
None
Indicates the software version of NO the PMU. Indicates the PCB NO version of the PMU.
NO NO
Yes Yes
None None
Indicates the erasable programmable logic NO device version of the PMU. Indicate the software compiling NO time of the PMU. Indicates the version description NO of the PMU. Indicates the manufacturing date NO of the PMU.
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
Indicates the manufacturer of the NO PMU.
NO
Yes
None
Indicates the PSU intelligent shutdown NO capability of the PMU.
NO
Yes
None
Indicates the status of the PSU NO intelligent shutdown switch of the PMU.
NO
Yes
None
Indicates the execution result of the setting of the PSU intelligent shutdown switch.
NO
NO
Yes
None
Indicates the remaining NO discharging time of a battery. Indicates the accumulated charging time of a battery, including floating charging time and equalized charging time.
NO
Yes
None
NO
NO
Yes
None
Indicates the accumulated sleeping time of a battery. Battery NO sleeping effectively prolongs the battery lifespan. Indicates the battery intelligent management NO capability of the PMU. Indicates the battery intelligent NO management mode of the PMU.
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO NO
Yes Yes
None None
NO
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO NO
Yes Yes
None None
NO
Yes
None
NO
Yes
None
NO NO
Yes Yes
None None
NO
Yes
None
NO
Yes
None
NO NO
NO NO
Yes Yes
None None
NO
NO
Yes
None
NO NO
NO NO
Yes Yes
None None
NO
NO
Yes
None
NO
Yes
None
The downlink and uplink frequencies of the local cell must stay within the same frequency band. Frequency(MHZ) = (Frequency Channel Number / 5) + Offset Band1: Common Frequencies Channel Number: [9612-9888] Offset: 0 Special Frequencies Channel Number: NO none Offset: 0 Band2: Common Frequencies Channel Number: [9262-9538] Offset: 0 Special Frequencies Channel Number: (12, 37, 62, 87, 112, 137, 162, 187, 212, 237, 262, 287) Offset: 1850.1 Band3: Common Frequencies Channel Number: [937-1288] Offset: 1525 Special Indicates the number of the cabinet where the YES PMU managing the diesel generator is located.
NO
Yes
None
NO
No
None
Indicates the number of the subrack where the YES PMU managing the diesel generator is located.
NO
No
None
Indicates the number of the slot where the PMU YES managing the diesel generator is located.
NO
No
None
Indicates whether intelligent control of the diesel generator is enabled. When intelligent control is enabled, the PMU automatically controls the diesel NO generator according to the preset parameters, thus reducing the operation cost of the diesel generator. Indicates the maximum rated output power of the diesel generator. It should be configured NO according to the rated output power printed on the name plate of the diesel generator. Indicates the oil level of the diesel NO generator. Indicates the current of the diesel NO generator. Indicates the total running time of the NO diesel generator. Indicates the number of the cabinet where the YES PMU managing the battery is located.
NO
No
None
NO
No
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
No
None
Indicates the number of the subrack where the YES PMU managing the battery is located.
NO
No
None
Indicates the number of the slot where the PMU managing the battery is located.
YES
NO
No
None
Indicates the installation type of battery. This parameter can be set to INNER or OUTER. The value INNER indicates that batteries are installed in a power cabinet. The value OUTER indicates that batteries are installed in a standalone battery cabinet. For lithium batteries, this parameter is set to NO INNER. For leadacid batteries, this parameter can be set to either INNER or OUTER, depending on the type of power cabinet. If the power cabinet is APM30 of version 301 (silkscreen: APM30) or 302 (silkscreen: APM30H), this parameter is set as required. If the power cabinet is not APM30 of version
NO
No
None
Indicates the scheduled boost charging interval. Batteries are boostcharged at this interval (in the unit of day), which keeps the batteries NO fully charged. This parameter is configured according to the instructions provided by manufacturers.
NO
No
None
Indicates the boost charging voltage. Boost charge is used to quickly recover the capacity of batteries. During the boost charge, the charging voltage is relatively high. After the batteries are discharged, the NO system automatically starts boost charge on the batteries. This parameter is configured according to the instructions provided by manufacturers.
NO
No
None
Indicates the capacity of battery 1. This parameter should be set according to the NO actual situation. Incorrect configuration may reduce the life span of the battery.
NO
No
None
Indicates the battery charging current limiting coefficient. Charging coefficient x Storage capacity = Maximum charging current. When the charging current is not smaller than the maximum charging NO current plus 5 A, an ALM-25625 Battery Current Abnormal alarm is reported. This parameter is configured according to the instructions provided by manufacturers.
NO
No
None
Indicates the floating charging voltage. Floating charge is used to compensate for the power loss of the batteries due to selfdischarge. The floating charging NO voltage is lower than the boost charging voltage. This parameter is configured according to the instructions provided by manufacturers.
NO
No
None
Indicates whether to enable battery disconnection NO against high temperature.
NO
No
None
Indicates the temperature above which the battery is powered off NO automatically under the condition that HtempShutdownFlg is enabled.
NO
No
None
Indicates whether to enable battery NO power-off against low voltage.
NO
No
None
Indicates the voltage below which the battery is powered off NO automatically under the condition that LvolShutdownFlg is enabled.
NO
No
None
Indicates the increased or reduced charging voltage of every battery when the ambient temperature is 1 degree Celsius higher or lower than NO the standard temperature specified by manufacturers. This parameter should be set according to the instructions provided by manufacturers.
NO
No
None
Indicates the lower limit of temperature. When the battery temperature is below the lower NO limit, an ALM-25650 Environmental Temperature Abnormal alarm is reported.
NO
No
None
Indicates the upper limit of temperature. When the battery temperature exceeds the upper NO limit, an ALM-25650 Environmental Temperature Abnormal alarm is reported.
NO
No
None
Indicates the number of battery groups.
NO
NO
No
None
Indicates the type of NO the battery.
NO
No
None
Indicates the number of times that the battery is powered off. Indicates the number of times that the battery is charged in half an hour.
NO
NO
Yes
None
NO
NO
Yes
None
Indicates the number of times that the battery is charged when the battery is charged NO for more than half an hour and less than one hour or for one hour. Indicates the number of times that the battery is charged when the battery is charged NO for more than one hour and less than two hours or for two hours. Indicates the number of times that the battery is charged when the battery is charged NO for more than two hours and less than three hours or for three hours. Indicates the number of times that the battery is charged when the battery is charged NO for more than three hours and less than four hours or for four hours.
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
Indicates the number of times that the battery is charged when the battery is charged NO for more than four hours and less than five hours or for five hours. Indicates the number of times that the battery is charged when the battery is charged NO for more than five hours and less than six hours or for six hours. Indicates the number of times that the battery is charged when the battery is charged NO for more than six hours and less than seven hours or for seven hours. Indicates the number of times that the battery is charged when the battery is charged NO for more than seven hours and less than eight hours or for eight hours. Indicates the number of times that the battery is charged in more than eight hours. Indicates the number of times that the battery is discharged in half an hour.
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
NO
Yes
None
NO
NO
Yes
None
Indicates the number of times that the battery is discharged when the battery is NO discharged for more than half an hour and less than one hour or for one hour. Indicates the number of times that the battery is discharged when the battery is NO discharged for more than one hour and less than two hours or for two hours. Indicates the number of times that the battery is discharged when the battery is NO discharged for more than two hours and less than three hours or for three hours. Indicates the number of times that the battery is discharged when the battery is NO discharged for more than three hours and less than four hours or for four hours. Indicates the number of times that the battery is discharged when the battery is NO discharged for more than four hours and less than five hours or for five hours.
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
Indicates the number of times that the battery is discharged when the battery is NO discharged for more than five hours and less than six hours or for six hours. Indicates the number of times that the battery is discharged when the battery is NO discharged for more than six hours and less than seven hours or for seven hours. Indicates the number of times that the battery is discharged when the battery is NO discharged for more than seven hours and less than eight hours or for eight hours. Indicates the number of times that the battery is NO discharged in more than eight hours. Indicates the date when the battery is installed. The scheduled tests for NO the battery are dependent on the installation date.
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
Indicates the capacity of battery 2. This parameter should be set according to the NO actual situation. Incorrect configuration may reduce the life span of the battery.
NO
No
None
Indicates the number of the cabinet where the YES PMU managing the battery is located. Indicates the number of the subrack where the YES PMU managing the battery is located. Indicates the number of the slot where the PMU managing the battery is located.
NO
No
None
NO
No
None
YES
NO
No
None
Indicates the duration of discharging the battery with the current of 0.05C10 to the moment when the discharging voltage is terminated. C10 indicates the nominal capacity of the battery, and 0.05C10 indicates NO that the battery is discharged with the current of 0.05 x norminal capacity of the battery. For example, if the battery capacity is 100 AH, 0.05C10 indicates that the battery is discharged with the current of 5 AH. Indicates the duration of discharging the battery with the current of 0.1C10 to the moment when the discharging voltage is terminated. C10 indicates the nominal capacity of the battery, and 0.1C10 indicates NO that the battery is discharged with the current of 0.1 x norminal capacity of the battery. For example, if the battery capacity is 100 AH, 0.1C10 indicates that the battery is discharged with the current of 10 AH.
NO
No
None
NO
No
None
Indicates the duration of discharging the battery with the current of 0.2C10 to the moment when the discharging voltage is terminated. C10 indicates the nominal capacity of the battery, and 0.2C10 indicates NO that the battery is discharged with the current of 0.2 x norminal capacity of the battery. For example, if the battery capacity is 100 AH, 0.2C10 indicates that the battery is discharged with the current of 20 AH. Indicates the duration of discharging the battery with the current of 0.3C10 to the moment when the discharging voltage is terminated. C10 indicates the nominal capacity of the battery, and 0.3C10 indicates NO that the battery is discharged with the current of 0.3 x nominal capacity of the battery. For example, if the battery capacity is 100 AH, 0.3C10 indicates that the battery is discharged with the current of 30 AH.
NO
No
None
NO
No
None
Indicates the duration of discharging the battery with the current of 0.4C10 to the moment when the discharging voltage is terminated. C10 indicates the nominal capacity of the battery, and 0.4C10 indicates NO that the battery is discharged with the current of 0.4 x nominal capacity of the battery. For example, if the battery capacity is 100 AH, 0.4C10 indicates that the battery is discharged with the current of 40 AH. Indicates the duration of discharging the battery with the current x 0.5C10 to the moment when the discharging voltage is terminated. C10 indicates the nominal capacity of the battery, and 0.5C10 indicates NO that the battery is discharged with the current of 0.5 x nominal capacity of the battery. For example, if the battery capacity is 100 AH, 0.5C10 indicates that the battery is discharged with the current of 50 AH.
NO
No
None
NO
No
None
Indicates the duration of discharging the battery with the current of 0.6C10 to the moment when the discharging voltage is terminated. C10 indicates the nominal capacity of the battery, and 0.6C10 indicates NO that the battery is discharged with the current of 0.6 x nominal capacity of the battery. For example, if the battery capacity is 100 AH, 0.6C10 indicates that the battery is discharged with the current of 60 AH. Indicates the duration of discharging the battery with the current of 0.7C10 to the moment when the discharging voltage is terminated. C10 indicates the nominal capacity of the battery, and 0.7C10 indicates NO that the battery is discharged with the current of 0.7 x nominal capacity of the battery. For example, if the battery capacity is 100 AH, 0.7C10 indicates that the battery is discharged with the current of 70 AH.
NO
No
None
NO
No
None
Indicates the duration of discharging the battery with the current of 0.8C10 to the moment when the discharging voltage is terminated. C10 indicates the nominal capacity of the battery, and 0.8C10 indicates NO that the battery is discharged with the current of 0.8 x nominal capacity of the battery. For example, if the battery capacity is 100 AH, 0.8C10 indicates that the battery is discharged with the current of 80 AH. Indicates the duration of discharging the battery with the current of 0.9C10 to the moment when the discharging voltage is terminated. C10 indicates the nominal capacity of the battery, and 0.9C10 indicates NO that the battery is discharged with the current of 0.9 x nominal capacity of the battery. For example, if the battery capacity is 100 AH, 0.9C10 indicates that the battery is discharged with the current of 90 AH.
NO
No
None
NO
No
None
Indicates the charging efficiency of batteries. The battery efficiency is a percentage of battery performance to the normal battery capacity. For NO example, a normal battery can supply power for 10 hours. If a battery can supply power for only eight hours, its battery efficiency is 80%. Indicates the end voltage of the discharging test.
NO
No
None
NO
NO
No
None
Indicates the quantity of battery in NO the battery group. Indicates the time limit of the discharging test.
NO
No
None
NO
NO
No
None
Indicates the time limit for the simplified discharging test. There are two types of discharging tests for a battery: a standard test and a NO simplified test. A standard test calculates the battery efficiency, and a simplified test judges only the quality of the battery. Indicates the end voltage of the simple discharging test.
NO
No
None
NO
NO
No
None
Indicates the test mode. It specifies whether to use the automatic test and which automatic test mode is used. There are four types of test modes: NOAUTOTEST (No Auto Test), PERIOD (Period Auto Test), POWERCUT (Power Off Auto Test), and PERIODPOWERC UT (Period and NO Power Off Auto Test). No Auto Test: indicates that the battery test is launched and controlled by the user. Period Auto Test: indicates that the battery test is launched automatically by the system as scheduled. Power Off Auto Test: indicates that the battery test is launched
NO
No
None
Indicates the time limit of the scheduled discharging test.
NO
NO
No
None
Indicates the time limit for the discharging test delay when the power is off or the discharging test is launched automatically. The interval between two battery tests must be greater than this time limit. Otherwise, the execution of the STR BATTST command fails.
NO
NO
No
None
Indicates the type of the battery test. There are two types of battery tests: STANDARD(Stand ard Test) and SIMPLE(Simple Test). Standard Test is used to calculate the NO efficiency of the battery. Simple Test is used only to judge the quality of the battery, but not to calculate the efficiency of the battery. This test takes a short time. Indicates the test start date, which is in the format of YYYY/MM/DD.
NO
Yes
None
NO
NO
Yes
None
Indicates the end reason of the battery test.
NO
NO
Yes
None
Indicates the result NO of the battery test.
NO
Yes
None
Indicates the battery efficiency. The battery is normal NO when the result is between 80% and 100%. Indicates the continued discharge NO duration of the battery. Indicates the voltage of the NO battery when the discharge is ended. Indicates the average current in the process of the battery discharge. Indicates the accumulated discharged power (Ah) from the beginning of discharge. NO
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
NO
Yes
None
Indicates the current temperature NO of the battery. Indicates the number of the YES cabinet where the PSU is located. Indicates the number of the subrack where the PSU is located. YES
NO
Yes
None
NO
No
None
NO
No
None
Indicates the number of the slot where the PSU is located.
YES
NO
No
None
Indicates the running status of the PSU.
NO
NO
Yes
None
Indicates the manufacturing date NO of the PSU.
NO
Yes
None
Indicates the manufacturer of the NO PSU.
NO
Yes
None
Indicates the PCB NO version of the PSU. Indicates the erasable programmable logic NO device (EPLD) version of the PSU. Indicates the compiling time of the software program in the PSU.
NO
Yes
None
NO
Yes
None
NO
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO NO
Yes Yes
None None
NO
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO NO
Yes Yes
None None
NO
Yes
None
NO
Yes
None
NO NO
Yes Yes
None None
NO
Yes
None
NO
Yes
None
NO NO
NO NO
Yes Yes
None None
NO
NO
Yes
None
NO NO
NO NO
Yes Yes
None None
NO
NO
Yes
None
NO
Yes
None
The downlink and uplink frequencies of the local cell must stay within the same frequency band. Frequency(MHZ) = (Frequency Channel Number / 5) + Offset Band1: Common Frequencies Channel Number: [9612-9888] Offset: 0 Special Frequencies Channel Number: NO none Offset: 0 Band2: Common Frequencies Channel Number: [9262-9538] Offset: 0 Special Frequencies Channel Number: (12, 37, 62, 87, 112, 137, 162, 187, 212, 237, 262, 287) Offset: 1850.1 Band3: Common Frequencies Channel Number: [937-1288] Offset: 1525 Special Indicates the cabinet number of the board where the YES output port is located. Indicates the subrack number of the board where the YES output port is located. Indicates the slot number of the board YES where the output port is located. Indicates the number of the YES output port. Indicates the name NO of the output port.
NO
Yes
None
NO
No
None
NO
No
None
NO
No
None
YES
No
None
NO
No
LBFD-004012 / TDLBFD-004012
Indicates the enabled/disabled state of the output port.
NO
NO
No
LBFD-004012 / TDLBFD-004012
Indicates the cabinet number of YES the board where the port is located. Indicates the subrack number of YES the board where the port is located. Indicates the slot number of the board YES where the port is located. Indicates the port YES number. Indicates the enabled/disabled state of the port. Alarms can be detected and NO reported through the port only when the state of the port is ON. Indicates the alarm ID bound to the alarm port. This parameter is NO reported as the ID of the alarm detected at the port.
YES
No
None
YES
No
None
YES
No
None
YES
No
None
NO
No
LBFD-004012 / TDLBFD-004012
NO
No
LBFD-004012 / TDLBFD-004012
Indicates the alarm port types: analog alarm port and digital alarm port. An analog alarm port is used to monitor the external environment that changes continuously. The port is supported only by the EMU. A digital alarm port is NO used to monitor the external environment of which the change is indicated in Boolean or discrete values. It is contained in the EMU, PMU, TCU, FMU, RRU, and power boards. The SC48200 PMU does not support digital ports.
NO
No
LBFD-004012 / TDLBFD-004012
Indicates the alarm level. This parameter specifies whether alarms generated by the sensor over the port NO are in high or low voltage. The alarm level is set according to the type of external sensor.
NO
No
LBFD-004012 / TDLBFD-004012
Indicates the alarm upper limit. If the environment measurement value is greater than the alarm upper limit configured for the sensor, the alarm is reported. Environment measurement value = Measurement lower limit + (Measurement upper limit Measurement lower NO limit) x (Observed electric current or voltage - Output lower limit)/(Output upper limit - Output lower limit).Temperature is measured in the unit of degree Celsius, voltage is measured in the unit of volt, and current is measured in the unit of milliampere.
NO
No
LBFD-004012 / TDLBFD-004012
Indicates the alarm lower limit. If the environment measurement value is smaller than the alarm lower limit configured for the sensor, the alarm is reported. Environment measurement value = Measurement lower limit + (Measurement upper limit Measurement lower NO limit) x (Observed electric current or voltage - Output lower limit)/(Output upper limit - Output lower limit).Temperature is measured in the unit of degree Celsius, voltage is measured in the unit of volt, and current is measured in the unit of milliampere. Indicates the sensor type. The user can set the sensor type to current type or NO voltage type according to the actual external sensor.
NO
No
LBFD-004012 / TDLBFD-004012
NO
No
LBFD-004012 / TDLBFD-004012
Indicates the measurement upper limit of the analog port. The range is set based on the actual situations such as the temperature and humidity.Temperatu NO re is measured in the unit of degree Celsius, voltage is measured in the unit of volt, and current is measured in the unit of milliampere.
NO
No
LBFD-004012 / TDLBFD-004012
Indicates the measurement lower limit of the analog port. The range is set based on the actual situations such as the temperature and humidity.Temperatu NO re is measured in the unit of degree Celsius, voltage is measured in the unit of volt, and current is measured in the unit of milliampere.
NO
No
LBFD-004012 / TDLBFD-004012
Indicates the upper limit of the output signals from the analog port. For sensors of either the current type or NO voltage type, the upper limit should be set according to the specifications of the sensor. Indicates the lower limit of the output signals from the analog port. For sensors of either the current type or NO voltage type, the lower limit should be set according to the specifications of the sensor. Indicates the connection type supported by the NE.
NO
No
LBFD-004012 / TDLBFD-004012
NO
No
LBFD-004012 / TDLBFD-004012
NO
NO
No
None
Indicates the authentication mode NO of the SSL connection.
NO
No
None
Indicates the cabinet number of the AAU.
YES
YES
No
None
Indicates the subrack number of the AAU.
YES
YES
No
None
Indicates the slot YES number of the AAU.
YES
No
None
Indicates the AAU name.
NO
NO
No
None
Indicates the RRU type of the AAU.
NO
YES
No
None
Indicates the NO administrative state.
NO
No
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO NO
Yes Yes
None None
NO
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO NO
Yes Yes
None None
NO
Yes
None
NO
Yes
None
NO NO
Yes Yes
None None
NO
Yes
None
NO
Yes
None
The VSWR alarm post-processing switch. If the switch is set to ON when the VSWR is greater than the VSWR alarm postprocessing threshold, the TX channel is performed to shut down. If the switch is set to OFF, the RRU degrades power. When this switch is set to OFF, an RF NO module decreases the total TX power of the TX channel by 3 dB to minimize the impacts of high VSWR. Different scenarios are described as follows: 1. An RF module degrades its power by decreasing the TX power of carriers sharing TX channels by 3 dB. 2. In the scenario where two TX
NO
No
None
Indicates the VSWR alarm postprocessing threshold. If the VSWR alarm postprocessing switch is set to ON and the VSWR is greater than the threshold, post-processing is performed to shut down the TX channel. In this case, the TX channel cannot be open automatically after the VSWR is NO normal. The VSWR alarm postprocessing threshold must be greater than 2.0. Otherwise, the following will occur:a. Setting the ALMPROCTHRHL D parameter by MML commands fails.b. When the VSWR alarm postprocessing threshold is configured in the configuration files
NO
No
None
Indicates the VSWR alarm threshold. When the current VSWR is greater than the threshold, a VSWR Abnormal alarm is reported. It is recommended that the VSWR alarm threshold be set according to the VSWR required by the engineering quality to reduce the probability that the VSWR alarm is reported falsely. NO To stabilize the false alarm probability to 1%, 0.1%, and 0.01%, you need to set the VSWR alarm threshold to the following recommended values: When the VSWR required by the engineering quality is smaller than or equal to 1.4, the recommended thresholds are 1.8,
NO
No
None
Indicates the position of the RRU, RFU on the chain or NO ring. It is calculated from the start port one by one.
YES
No
None
Indicates the ID of the RRU or RFU chain/ring.
NO
YES
No
None
Indicates the position where the RRU or RFU is installed in the topology. The main NO chain/ring is the one connected to the optical port on the baseband processing board.
NO
No
None
Indicates the working mode of the RRU or RFU. MRFU, MRRU, and PRRU support both single-mode and multi-mode base NO stations. LRFU supports only LTE_FDD and LRRU supports LTE_TDD and LTE_FDD.
YES
No
None
Indicates the number of RX channels of the RRU or RFU. Indicates the number of TX channels of the RRU or RFU. Indicates the number of carriers on each RX channel. Indicates the number of carriers on each TX channel. Indicates the
NO
YES
No
None
NO
YES
No
None
NO
NO
Yes
None
NO
NO
Yes
None
minimum uplink frequency supported by the RRU. For example, if this parameter is NO set to 9250, the minimum uplink frequency of the RRU is 9250 x 0.1 MHz, which equals to 925 MHz.
NO
Yes
None
Indicates the maximum uplink frequency supported by the RRU. For example, if this parameter is set to 9450, the maximum uplink frequency of the RRU is 9450 x 0.1 MHz, which equals to 945 MHz. Indicates the minimum downlink frequency supported by the RRU. For example, this parameter is set to 9650, the minimum downlink frequency of the RRU is 9650 x 0.1 MHz, which equals to 965 MHz. Indicates the maximum downlink frequency supported by the RRU. For example, if this parameter is set to 9850, the maximum downlink frequency of the RRU is 9850 x 0.1 MHz, which equals to 985 MHz. Indicates the maximum output power per TX channel in the RRU/RFU. Indicates the UL channel gain. Indicates the bandwidth supported by each TX channel in the uplink.
NO
NO
Yes
None
NO
NO
Yes
None
NO
NO
Yes
None
NO
NO
Yes
None
NO
NO
Yes
None
NO
NO
Yes
None
Indicates the temperature of the NO PA. Indicates the current temperature NO of the RRU or RFU.
NO
Yes
None
NO
Yes
None
Indicates the RRU/RFU level on NO the trunk of the chain/ring. Indicates the serial number of the RRU NO or RFU.
NO
Yes
None
NO
Yes
None
Indicates the standards that are supported by the RRU or RFU.
NO
NO
Yes
None
Indicates the access direction of the service plane.
NO
NO
Yes
None
Indicates the maximum output power of TX unit 0 (single carrier) of the RRU or RFU.
NO
NO
Yes
None
Indicates the maximum output power of TX unit 0 NO (multiple carriers) of the RRU or RFU. Indicates the bandwidth supported by each TX channel in the downlink.
NO
Yes
None
NO
NO
Yes
None
Indicates the physical indicator of NO the RRU. Indicates the periodical report switch for the Bit Error Rate (BER) on the link. If the switch NO is set to ON, the result of BER test is reported periodically. Indicates the test time. When the test time is over, the system NO automatically stops the test and reports the test result. Indicates the interference check mode. POW_IQ_MODE indicates that both power and IQ data is collected. NO POW_MODE indicates that only power data is collected. IQ_MODE indicates that only IQ data is collected. Indicates the shortduration power NO statistics period.
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
Indicates the duration for a single NO collection of power statistics.
NO
Yes
None
Indicates the UL frequency. Indicates the bit error rate. Indicates the interference check sampling result.
NO NO
NO NO
Yes Yes
None None
NO
NO
Yes
None
Indicates the set type.
NO
NO
Yes
None
Indicates the BER threshold. The BER NO threshold reflects the link quality.
NO
Yes
None
Indicates the Linerate.
NO
NO
Yes
None
NO NO
NO NO
Yes Yes
None None
NO
NO
Yes
None
NO NO
NO NO
Yes Yes
None None
NO
NO
Yes
None
NO
Yes
None
The downlink and uplink frequencies of the local cell must stay within the same frequency band. Frequency(MHZ) = (Frequency Channel Number / 5) + Offset Band1: Common Frequencies Channel Number: [9612-9888] Offset: 0 Special Frequencies Channel Number: NO none Offset: 0 Band2: Common Frequencies Channel Number: [9262-9538] Offset: 0 Special Frequencies Channel Number: (12, 37, 62, 87, 112, 137, 162, 187, 212, 237, 262, 287) Offset: 1850.1 Band3: Common Frequencies Channel Number: [937-1288] Offset: 1525 Special Indicates the NO administrative state.
NO
Yes
None
NO
No
None
NO
No
None
NO
No
None
NO
No
None
YES
No
None
NO
YES
No
None
NO
No
None
YES
No
None
NO
YES
No
None
NO
YES
No
None
NO
NO
Yes
None
NO
NO
Yes
None
NO
Yes
None
NO
NO
Yes
None
NO
NO
Yes
None
NO
NO
Yes
None
NO
NO
Yes
None
NO
NO
Yes
None
NO
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
NO
Yes
None
NO
NO
Yes
None
NO
NO
Yes
None
NO
Yes
None
NO
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO NO
NO NO
Yes Yes
None None
NO
NO
Yes
None
NO
NO
Yes
None
NO
Yes
None
NO
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO NO
Yes Yes
None None
NO
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO NO
Yes Yes
None None
NO
Yes
None
NO
Yes
None
NO NO
Yes Yes
None None
NO
Yes
None
NO
Yes
None
NO NO
NO NO
Yes Yes
None None
NO
NO
Yes
None
NO NO
NO NO
Yes Yes
None None
NO
NO
Yes
None
NO
Yes
None
The downlink and uplink frequencies of the local cell must stay within the same frequency band. Frequency(MHZ) = (Frequency Channel Number / 5) + Offset Band1: Common Frequencies Channel Number: [9612-9888] Offset: 0 Special Frequencies Channel Number: NO none Offset: 0 Band2: Common Frequencies Channel Number: [9262-9538] Offset: 0 Special Frequencies Channel Number: (12, 37, 62, 87, 112, 137, 162, 187, 212, 237, 262, 287) Offset: 1850.1 Band3: Common Frequencies Channel Number: [937-1288] Offset: 1525 Special Indicates the number of the YES cabinet where the RFU is located. Indicates the number of the subrack where the RFU is located. YES
NO
Yes
None
NO
No
None
YES
No
None
Indicates the slot YES number of the RFU.
YES
No
None
Indicates the type of NO the RFU.
YES
No
None
NO
No
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO NO
Yes Yes
None None
NO
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO NO
Yes Yes
None None
NO
Yes
None
NO
Yes
None
NO NO
Yes Yes
None None
NO
Yes
None
NO
Yes
None
NO
No
None
NO
No
None
NO
No
None
YES
No
None
NO
YES
No
None
NO
No
None
YES
No
None
NO
YES
No
None
NO
YES
No
None
NO
NO
Yes
None
NO
NO
Yes
None
NO
Yes
None
NO
NO
Yes
None
NO
NO
Yes
None
NO
NO
Yes
None
NO
NO
Yes
None
NO
NO
Yes
None
NO
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
NO
Yes
None
NO
NO
Yes
None
NO
NO
Yes
None
NO
Yes
None
NO
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO NO
NO NO
Yes Yes
None None
NO
NO
Yes
None
NO
NO
Yes
None
NO
Yes
None
NO
NO
Yes
None
NO NO
NO NO
Yes Yes
None None
NO
NO
Yes
None
NO NO
NO NO
Yes Yes
None None
NO
NO
Yes
None
NO
Yes
None
The downlink and uplink frequencies of the local cell must stay within the same frequency band. Frequency(MHZ) = (Frequency Channel Number / 5) + Offset Band1: Common Frequencies Channel Number: [9612-9888] Offset: 0 Special Frequencies Channel Number: NO none Offset: 0 Band2: Common Frequencies Channel Number: [9262-9538] Offset: 0 Special Frequencies Channel Number: (12, 37, 62, 87, 112, 137, 162, 187, 212, 237, 262, 287) Offset: 1850.1 Band3: Common Frequencies Channel Number: [937-1288] Offset: 1525 Special Indicates the number of the cabinet where the RRU is located.
NO
Yes
None
YES
NO
No
None
Indicates the number of the subrack where the RRU is located.
YES
YES
No
None
Indicates the number of the slot where the RRU is located.
YES
NO
No
None
Indicates the RRU name.
NO
NO
No
None
Indicates the type of NO the RRU.
YES
No
None
Indicates the test type. Indicates the test time.
NO NO
NO NO
Yes Yes
None None
Indicates the difference of the RSSI voltage threshold between full power and no power during the NO PIMOFFLINE test. If the difference is greater than this threshold, intermodulation interference exists. Indicates the number of the antenna port. Indicates the test result. Indicates the value of the RTWP. Indicates the difference of the RTWP. Indicates the maximum value of the RTWP. NO
NO
Yes
None
NO
Yes
None
NO
NO
Yes
None
NO NO
NO NO
Yes Yes
None None
NO
NO
Yes
None
NO
No
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO NO
Yes Yes
None None
NO
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO NO
Yes Yes
None None
NO
Yes
None
NO
Yes
None
NO NO
Yes Yes
None None
NO
Yes
None
NO
Yes
None
NO
No
None
NO
No
None
NO
No
None
YES
No
None
NO
YES
No
None
NO
No
None
YES
No
None
NO
YES
No
None
NO
YES
No
None
NO
NO
Yes
None
NO
NO
Yes
None
NO
Yes
None
NO
NO
Yes
None
NO
NO
Yes
None
NO
NO
Yes
None
NO
NO
Yes
None
NO
NO
Yes
None
NO
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
NO
Yes
None
NO
NO
Yes
None
NO
NO
Yes
None
NO
Yes
None
NO
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO NO
NO NO
Yes Yes
None None
NO
NO
Yes
None
NO
NO
Yes
None
NO
Yes
None
NO
NO
Yes
None
NO NO
NO NO
Yes Yes
None None
NO
NO
Yes
None
NO NO
NO NO
Yes Yes
None None
NO
NO
Yes
None
NO
Yes
None
The downlink and uplink frequencies of the local cell must stay within the same frequency band. Frequency(MHZ) = (Frequency Channel Number / 5) + Offset Band1: Common Frequencies Channel Number: [9612-9888] Offset: 0 Special Frequencies Channel Number: NO none Offset: 0 Band2: Common Frequencies Channel Number: [9262-9538] Offset: 0 Special Frequencies Channel Number: (12, 37, 62, 87, 112, 137, 162, 187, 212, 237, 262, 287) Offset: 1850.1 Band3: Common Frequencies Channel Number: [937-1288] Offset: 1525 Special Indicates the ID of the RRU chain. It uniquely identifies a YES chain within a base station.
NO
Yes
None
YES
No
None
Indicates the type of NO the topology.
YES
No
None
Indicates the backup mode of the RRU chain/ring. There are two modes: cold backup and hot backup. Cold backup indicates that when the link on one end of the chain/ring fails, the service is disrupted for a short period of time, and then re-established on the other end of the chain/ring. Hot backup indicates NO that when the link on one end of the chain/ring fails, the service is taken over by the other end of the chain/ring immediately. There is only one RRU on the chain/ring in hot backup mode.In the RRUCHAIN MO, if TT is set to RING and BM is set to HOT, the head CPRI port and the tail CPRI port of the
NO
No
None
Indicates the cabinet number of the board where the NO head CPRI port is located.
NO
No
None
Indicates the subrack number of the board where the NO head CPRI port is located.
NO
No
None
Indicates the slot number of the board where the head NO CPRI port is located.
YES
No
None
Indicates the number of the head NO CPRI port.
YES
No
None
Indicates the cabinet number of the board where the NO tail CPRI port is located.
NO
No
None
Indicates the subrack number of the board where the NO tail CPRI port is located.
NO
No
None
Indicates the slot number of the board NO where the tail CPRI port is located.
YES
No
None
Indicates the number of the tail CPRI port.
NO
YES
No
None
Indicates the breakpoint position 1 on the chain/ring. When this NO parameter is set to 255, the breakpoint is disabled.
NO
No
None
Indicates the breakpoint position 2 on the chain/ring. When this NO parameter is set to 255, the breakpoint is disabled.
NO
No
None
Indicates the access type of the RRU. When AccessType is set to the local port, the LBBP is connected to the RRU/RFU through the CPRI port. When AccessType is set NO to the peer port, the peer LBBP is directly connected to the RRU/RFU, and the local LBBP is connected to the peer LBBP through the IDX2 port on the backplane.
NO
No
None
Indicates the userdefined rate. The value AUTO indicates the the auto negotiation mode is adopted. The value 1.25 indicates that the CPRI rate is 1.25 Gbit/s. The value 2.5 indicates that NO the CPRI rate is 2.5 Gbit/s. The value 4.9 indicates that the CPRI rate is 4.9 Gbit/s. The value 6.1 indicates that the CPRI rate is 6.1 Gbit/s. The value 9.8 indicates that the CPRI rate is 9.8 Gbit/s. Indicates the level NO of the RRU chain. Indicates the number of RRUs NO carried on the RRU chain/ring.
NO
No
None
NO
Yes
None
NO
Yes
None
Indicates the cabinet number of the RRU where the YES RX channel of the RRU is located.
NO
No
None
Indicates the subrack number of the RRU where the YES RX channel of the RRU is located.
YES
No
None
Indicates the slot number of the RRU where the RX YES channel of the RRU is located.
NO
No
None
Indicates the number of the RX YES channel of the RRU. Indicates the logical switch of the RX channel of the RRU, which is set to ON by default. The NO switch can be set by running the MOD RXBRANCH command.
YES
No
None
NO
No
None
Indicates the attenuation of the RX channel of the RRU.
NO
NO
No
None
Indicates the actual physical status of the RX channel of the RRU, the switch of which is set to ON by default. When the logical switch of the RX channel is OFF, the physical switch of the RX channel NO must be OFF. When the logical switch of the RX channel is ON and the RRU is running properly, the physical switch of the RX channel of the RRU can be ON. Indicates the minimum uplink frequency supported by the RRU band 1. For example, if this NO parameter is set to 9250, the minimum uplink frequency of the RRU is 9250 x 0.1 MHz, which equals to 925 MHz.
NO
Yes
None
NO
Yes
None
Indicates the maximum uplink frequency supported by the RRU band 1. For example, if this parameter is set to 9450, the maximum uplink frequency of the RRU is 9450 x 0.1 MHz, which equals to 945 MHz. Indicates the bandwidth supported by each TX channel band 1 in the downlink. This bandwidth is an instantaneous bandwidth. Indicates the minimum uplink frequency supported by the RRU band 2.This parameter is NULL,when the RRU does not supported many bands. For example, if this parameter is set to 9250, the minimum uplink frequency of the RRU is 9250 x 0.1 MHz, which equals to 925 MHz. Indicates the maximum downlink frequency supported by the RRU band 2.This parameter is NULL,when the RRU does not supported many bands. For example, if this parameter is set to 9850, the maximum downlink frequency of the RRU is 9850 x 0.1 MHz, which equals to 985 MHz.
NO
NO
Yes
None
NO
NO
Yes
None
NO
NO
Yes
None
NO
NO
Yes
None
Indicates the bandwidth supported by each TX channel band 2 in the uplink. This bandwidth is an NO instantaneous bandwidth. This parameter is NULL, when the RRU does not supported multibands.
NO
Yes
None
Indicates the cabinet number of the RRU where the YES TX channel of the RRU is located.
YES
No
None
Indicates the subrack number of the RRU where the YES TX channel of the RRU is located.
YES
No
None
Indicates the slot number of the RRU where the TX YES channel of the RRU is located.
YES
No
None
Indicates the number of the TX YES channel of the RRU.
YES
No
None
Indicates the logical switch of the TX channel of the RRU. This switch is used to open or close the TX channel. The logical switch of the TX channel and the ARFCNs on the TX channel determine the state of the NO physical switch of the TX channel: When this switch is ON and the TX channel is configured with ARFCNs, the physical switch is ON. In other cases, the physical switch is OFF. Indicates the current VSWR of the TX channel of the RRU.
NO
No
None
NO
NO
Yes
None
Indicates the actual physical status of the TX channel of the RRU. The logical switch of the TX channel and the ARFCN on the TX channel determine the state of the physical switch of the TX channel: If NO the logical switch of a TX channel is ON and the ARFCN is configured for the TX channel, the physical switch of the TX channel is ON. In other cases, the physical switch is OFF. Indicates the adjusted output NO power on the TX channel of the RRU. Indicates the test frequency. Different types of RRUs support different frequency ranges. Therefore, the frequency of the cell NO is used as the VSWR test frequency. The default test frequency of an RRU is 65535. Indicates the relative TX power. If this parameter is NO not specified, the maximum power is used by all boards. Indicates the duration of the VSWR test. Indicates the number of the site. Indicates the number of the sector. NO NO NO
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO NO NO
Yes Yes Yes
None None None
Indicates the name NO of the site. Indicates the maximum output power on the TX channel. The adjustment step is 1 W (1000 mW). NO When the output power is set to 0 mW, the maximum output power is unlocked and restored. Indicates the maximum output power on the TX channel. The error is precise to +/-0.5 DB. Indicates the maximum output power of the RRU or RFU TX unit (single carrier). Indicates the maximum output power of the RRU or RFU TX unit (multiple carriers).
NO
Yes
None
NO
Yes
None
NO
NO
Yes
None
NO
NO
Yes
None
NO
NO
Yes
None
Indicates the maximum output power supported by the TX channel hardware. This NO parameter value can have a 0.5 dB difference from the actual maximum output power. Indicates the minimum downlink frequency supported by the RRU band 1. For example, this NO parameter is set to 9650, the minimum downlink frequency of the RRU is 9650 x 0.1 MHz, which equals to 965 MHz.
NO
Yes
None
NO
Yes
None
Indicates the maximum downlink frequency supported by the RRU band 1. For example, if this parameter is set to 9850, the maximum downlink frequency of the RRU is 9850 x 0.1 MHz, which equals to 985 MHz. Indicates the bandwidth supported by each TX channel band 1 in the downlink. This bandwidth is an instantaneous bandwidth. Indicates the minimum downlink frequency supported by the RRU band 2. This parameter is NULL,when the RRU does not supported many bands.For example, this parameter is set to 9650, the minimum downlink frequency of the RRU is 9650 x 0.1 MHz, which equals to 965 MHz. Indicates the maximum downlink frequency supported by the RRU band 2. This parameter is NULL,when the RRU does not supported many bands.For example, if this parameter is set to 9850, the maximum downlink frequency of the RRU is 9850 x 0.1 MHz, which equals to 985 MHz.
NO
NO
Yes
None
NO
NO
Yes
None
NO
NO
Yes
None
NO
NO
Yes
None
Indicates the bandwidth supported by each TX channel band 2 in the downlink. This bandwidth is NO an instantaneous bandwidth. This parameter is NULL, when the RRU does not supported multibands. Indicates the minimal test NO frequency. Indicates the maximal test NO frequency. . Indicates the result of the cross feed NO test. Indicates the IPv4 address of the NTP YES server.
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
No
None
Indicates the period based on which NTP time synchronization is performed periodically. The switch for periodic NTP time synchronization is turned on automatically.The time of an eNodeB may have differences with the standard time, and a large difference affects the accuracy NO of KPIs. Therefore, a period must be configured for the eNodeB to perform time synchronization with the NTP server periodically to ensure the accurate time. The period for periodic NTP time synchronization must be configured based on the NTP server performance, transport network Indicates the port number of the NTP NO server. Indicates the mode of the IP address of YES the NTP server. Indicates the IPv6 address of the NTP YES server. Indicates the mode of the NTP NO authentication.
YES
No
None
NO
No
None
NO
No
None
NO
No
None
NO
No
None
Indicates the key used for NTP authentication. The key used in the DES_S algorithm is a hexadecimal number whose length is 64 bits in binary format. The seven least significant bits of each byte are used to construct 56-bit key data, and the eighth bit is the odd parity bit for each byte. Any empty bit NO is filled with 0 to ensure that the key data is composed of 16 hexadecimal digits and has an odd number for parity check. The key used in the DES_N algorithm is similar to the key used in the DES_S algorithm. The only difference is that in the key used in the DES_N algorithm, the most significant bit is used for parity Indicates the serverside index of the NTP authentication key. The index must NO be the same as the setting on the server. Indicates an NTP server is an active or standby server. Users can run the SET NO MASTERNTPS command to set an NTP server as a master NTP server.
YES
No
None
YES
No
None
NO
No
None
Indicates the time zone of the NE.
NO
NO
No
None
Indicates whether DST is enabled.
NO
NO
No
None
Indicates the mode in which the DST start date is specified. There are three modes: Date, for example, April 1; Day of the week, for example, the first Sunday in April; NO Date plus day of the week, for example, April 1 and Sunday. If it is Sunday on April 1, DST starts on April 1. Otherwise, DST starts on the first Sunday after April 1.
NO
No
None
Indicates the month in which the NE NO DST starts.
NO
No
None
Indicates the day on which the NE DST NO starts.
NO
No
None
Indicates in which week the NE DST starts.
NO
NO
No
None
Indicates the week in which the NE DST starts.
NO
NO
No
None
Indicates the time when the NE DST starts. The value of NO this parameter observes the standard time. Indicates the end date mode of the NE DST. There are three formats: date format, for example, April 1st; week format, for example, the first Sunday in April; NO date and week format, for example, for example, April 1st and Sunday. If it is Sunday on April 1st, April 1st is the date. Otherwise, the first Sunday after April 1st is the date.
NO
No
None
NO
No
None
Indicates the month in which the NE NO DST ends.
NO
No
None
Indicates the day on which the NE DST NO ends.
NO
No
None
Indicates the week NO in which DST ends.
NO
No
None
Indicates the week in which the NE DST ends.
NO
NO
No
None
Indicates the time when the DST of the NE ends. The NO value of this parameter observes DST. Indicates the DST time offset of the NE. This parameter can be set to a negative value. A negative value indicates that the NO NE time is earlier than the DST time, and a positive value indicates that the NE time is later than the DST time.
NO
No
None
NO
No
None
Indicates the offset of time zone. This parameter can be NO set to a negative value. Indicates the date to be set for the NE. The format is as follows: YYYY-MMDD. For example, NO 2006-09-08 indicates September 8th of 2006. Indicates the time to be set for the NE. The format is as NO follows: HH:MM:SS. For example, 10:20:05. Indicates the current date and time of the NE. The query result is the local time of the NE, including the year, month, day, hour, minute, second, and time zone. If the NO DST of the NE is effective, the query result contains a DST flag (the flog used to indicate whether the DST is applied). The format is as follows: YYYYMM-DD HH:MM:SS.
NO
No
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
Indicates the external reference time source of the NE.
NO
NO
No
None
Indicates the date and time of the last successfullysynchronized time NO of the NE. The format is as follows: YYYY-MM-DD HH:MM:SS.
NO
Yes
None
Indicates the IP address of the FTP YES server.
NO
No
None
Indicates the port of NO the FTP server.
NO
No
None
Indicates the index of the operator.
YES
YES
No
None
Indicates the extended QoS Class Identifier (QCI), which is required by the operator for user differentiation.
YES
YES
No
None
Indicates the ID of a service-based interNO RAT handover policy group.
NO
No
Indicates the ID of the service-based inter-frequency handover policy group.
NO
NO
No
LBFD-00201805
YES
YES
No
None
Indicates the QoS Class Identifier (QCI) of an EPS bearer. Different QCIs represent different QoS specifications such as the packet delay YES budget, packet error loss rate, and resource type (whether the service is a GBR service or not). For details, see Table 6.1.7 in 3GPP TS 23.203. Indicates the ID of a service-based interNO RAT handover policy group.
YES
No
None
NO
No
NO
NO
No
LBFD-00201805
YES
YES
No
None
Indicates the highpriority system to be considered in blind NO handovers. It is UTRAN by default.
NO
No
LOFD-001033 / TDLOFD-001033 LOFD-001034 / TDLOFD-001034 LOFD-001035 LOFD-001068 LOFD-001069 LOFD-001052 LOFD-001053 LOFD-001019 / TDLOFD-001019 LOFD-001020 / TDLOFD-001020 LOFD-001021
Indicates the medium-priority system to be considered in blind handovers. It is GERAN by default. If this parameter is set to NULL, the NO system with the medium blind handover priority is not specified. In this case, only blind handovers to the high-priority system are applicable.
NO
No
LOFD-001033 / TDLOFD-001033 LOFD-001034 / TDLOFD-001034 LOFD-001035 LOFD-001019 / TDLOFD-001019 LOFD-001020 / TDLOFD-001020 LOFD-001021
Indicates the lowpriority system to be considered in blind handovers. It is CDMA2000 by default. If this parameter is set to NULL, the system NO with the low blind handover priority is not specified. In this case, only blind handovers to the high- and mediumpriority systems are applicable.
NO
No
LOFD-001033 / TDLOFD-001033 LOFD-001034 / TDLOFD-001034 LOFD-001035 LOFD-001019 / TDLOFD-001019 LOFD-001020 / TDLOFD-001020 LOFD-001021
Indicates the Location Services (LCS) capability of the UTRAN.
NO
NO
No
Indicates the Location Services (LCS) capability of the GERAN.
NO
NO
No
Indicates the Location Services (LCS) capability of the CDMA2000.
NO
NO
No
LOFD-001035 LOFD-001047 / TDLOFD-001047
YES
YES
No
None
Indicates the mobile country code of the YES target PLMN.
YES
No
LBFD-00201801 / TDLBFD-00201801 LBFD-00201802 / TDLBFD-00201802 LOFD-001019 / TDLOFD-001019 LOFD-001020 / TDLOFD-001020 LOFD-001021
Indicates the mobile network code of the YES target PLMN.
YES
No
LBFD-00201801 / TDLBFD-00201801 LBFD-00201802 / TDLBFD-00201802 LOFD-001019 / TDLOFD-001019 LOFD-001020 / TDLOFD-001020 LOFD-001021
Indicates the ID of the RAT/frequency priority group.
YES
YES
No
LOFD-001032 / TDLOFD-001032 LOFD-001044 / TDLOFD-001044 LOFD-001045 / TDLOFD-001045
Indicates the Radio Access Technology YES (RAT).
YES
No
Indicates the downlink EARFCN. Before configuring a priority for an EARFCN specified by this parameter, YES ensure that an external or local cell working on this EARFCN has been configured.
YES
No
Indicates the priority of the RAT or frequency. The NO value 0 indicates the lowest priority.
NO
No
Indicates the GERAN frequency band.
NO
NO
No
Indicates the ID of the operator.
YES
YES
No
LBFD-00201805
YES
YES
No
LBFD-00201805
Indicates whether the policy group allows a target frequency to be specified for servicebased interfrequency handovers. The value 0 indicates NO that the policy group does not allow a target frequency to be specified, and the value 1 indicates that the policy group allows a target frequency to be specified.
NO
No
LBFD-00201805
Indicates the frequency to which a service with a specified QCI is preferentially handed over.
NO
NO
No
LBFD-00201805
YES
YES
No
Indicates the ID of the service-based YES inter-RAT handover policy group.
YES
No
Indicates whether inter-RAT handover is required, allowed, NO or not allowed for services with the QCI.
NO
No
Indicates the subscriber profile ID YES (SPID).
YES
No
LOFD-001032 / TDLOFD-001032 LOFD-001044 / TDLOFD-001044 LOFD-001045 / TDLOFD-001045 LOFD-001054 / TDLOFD-001054 LOFD-00105401 / TDLOFD-00105401 LOFD-001059 / TDLOFD-001059
Indicates whether DRX is supported. If this parameter is set to TRUE, ordinary DRX parameters are applied to UEs NO with the SPID. If this parameter is set to FALSE, special DRX parameters are applied to UEs with the SPID.
NO
No
LBFD-002017 / TDLBFD-002017
Indicates whether to specify a NO RAT/frequency priority group.
NO
No
LOFD-001032 / TDLOFD-001032 LOFD-001044 / TDLOFD-001044 LOFD-001045 / TDLOFD-001045 LOFD-001032 / TDLOFD-001032 LOFD-001044 / TDLOFD-001044 LOFD-001045 / TDLOFD-001045 LOFD-001054 / TDLOFD-001054 LOFD-00105401 / TDLOFD-00105401 LOFD-001059 / TDLOFD-001059
Indicates the ID of a RAT/frequency NO priority group.
NO
No
Indicates whether to support preallocation. If this parameter is set to TRUE, resources can be preallocated NO to UEs. If this parameter is set to FALSE, resources are not preallocated to UEs. Indicates whether to enable or disable inter-frequency load balancing for the SPID. The values TRUE and FALSE NO indicate that interfrequency load balancing is allowed and prohibited for UEs with the SPID, respectively. Indicates whether to enable or disable inter-RAT load balancing for the SPID. The values TRUE and FALSE NO indicate that interRAT load balancing is allowed and prohibited for UEs with the SPID, respectively. Indicates whether to enable handovers back to the home public land mobile network (HPLMN) for UEs with the SPID. If this function is enabled, a roaming UE can NO be handed over to the HPLMN when this UE moves back to the HPLMN. If this function is disabled, this UE cannot be handed over to the HPLMN based on the SPID.
NO
No
LOFD-001059 / TDLOFD-001059
NO
No
LOFD-001032 / TDLOFD-001032
NO
No
LOFD-001032 / TDLOFD-001032
NO
No
LOFD-001032 / TDLOFD-001032
Indicates the length of the counter check timer. When the timer expires, a counter check procedure is initiated. After the procedure is complete, the timer NO is restarted. A length of 0 indicates that the timer is invalid. In this case, the eNodeB cannot initiate periodic counter check procedures.
NO
No
LBFD-002004 / TDLBFD-002004
Indicates the COUNT value for initiating counter check procedures. When the COUNT value (used at the PDCP layer) of any DRB for a UE is a multiple of the value of this parameter, NO the eNodeB initiates a counter check procedure. The value 0 indicates that the eNodeB does not initiate a counter check procedure based on the COUNT value.
NO
No
LBFD-002004 / TDLBFD-002004
Indicates whether to release a DRB when the counter NO check detects an unexpected result in the DRB.
NO
No
LBFD-002004 / TDLBFD-002004
Indicates the highest-priority ciphering algorithm supported by the NO eNodeB. The value NULL indicates that ciphering is not applied. Indicates the second-priority ciphering algorithm supported by the NO eNodeB. The value NULL indicates that ciphering is not applied. Indicates the thirdpriority ciphering algorithm supported by the eNodeB. The NO value NULL indicates that ciphering is not applied.
NO
No
NO
No
NO
No
Indicates the timer governing the period the eNodeB will NO wait for a response message from the MME.
NO
No
None
Indicates the timer governing the period the eNodeB will NO wait for a response message from the neighboring eNodeB.
NO
No
None
Indicates the timer governing the period the eNodeB will NO wait for a response message from the UE.
NO
No
None
Indicates the highest-priority integrity protection algorithm supported by the eNodeB. The NO value NULL indicates that integrity protection is not applied. Indicates the second-priority integrity protection algorithm supported by the eNodeB. The NO value NULL indicates that integrity protection is not applied.
NO
No
LBFD-002004 / TDLBFD-002004
NO
No
LBFD-002004 / TDLBFD-002004
Indicates the thirdpriority integrity protection algorithm supported by the NO eNodeB. The value NULL indicates that integrity protection is not applied.
NO
No
LBFD-002004 / TDLBFD-002004
Indicates whether to enable or disable NO X2 setup by SON.
NO
No
Indicates the method of X2 setup by SON, that is, the method of automatically setting up X2 interfaces. The value NO X2_OVER_M2000 can be set only for Huawei eNodeBs, and the value X2_OVER_S1 can be set for any eNodeB. Indicates whether to enable or disable scheduling request NO indication (SRI) adaptation.
NO
No
NO
No
LOFD-001015 / TDLOFD-001015
Indicates whether to set a logical channel group profile. Currently, two logical channel group profiles are available: LCG_PROFILE_0 and LCG_PROFILE_1. If LCG_PROFILE_0 is used, only one NO logical channel group is assigned to non-GBR services. If LCG_PROFILE_1 is used, two logical channel groups are assigned to nonGBR services: one to high-priority nonGBR services and the other to lowpriority non-GBR services. Indicates whether to enable or disable RAN information management (RIM) for handovers in RNC pool scenarios. An RNC NO pool can be used for load balancing between RNCs. A cell under an RNC can be controlled by another RNC in the RNC pool.
NO
No
LBFD-002025 / TDLBFD-002025 LOFD-001015 / TDLOFD-001015
NO
No
LOFD-001019 / TDLOFD-001019
Indicates whether an eNodeB uses serial or parallel message transmission mode during security mode activation and RRC reconfiguration NO procedures. If this parameter is set to ON, the eNodeB uses parallel transmission mode. If this parameter is set to OFF, the eNodeB uses serial transmission mode.
NO
No
LBFD-002007 / TDLBFD-002007
None
NO
NO
No
None
Indicates whether to enable ROHC. Set this parameter to ON if the eNodeB NO is expected to support VoIP or video services.
NO
No
LOFD-001017 / TDLOFD-001017
Indicates the operating mode of ROHC. In Unidirectional Mode (U-Mode), packets are sent only from the compressor to the decompressor, and a feedback channel is not mandatory. Therefore, U-Mode is less reliable than Bidirectional Optimistic Mode (OMode) and Bidirectional NO Reliable Mode (RMode), but its feedback-induced overhead is minimum compared with the overhead in O-Mode and RMode. In O-Mode, the decompressor can send feedback messages to the compressor to indicate decompression failures or successful context updates. O-Mode is
NO
No
LOFD-001017 / TDLOFD-001017
Indicates the compression profile supported by the eNodeB. Under the ROHC framework, header compression algorithms vary with protocols. Profiles define the header compression protocols (such as RTP/UDP/IP or TCP/IP), which are under the same ROHC framework, for specific types of NO packet streams. Each profile has a unique identifier. As defined by LTE specifications, the eNodeB supports the following profiles: profile 0x0001 (usage: RTP/UDP/IP; reference: RFC 3095 and RFC 4815), profile 0x0002 (usage: UDP/IP; reference: RFC 3095 and RFC 4815), profile
NO
No
LOFD-001017 / TDLOFD-001017
Indicates the length of timer T302. T302 specifies the wait time for retransmitting an RRCConnectionRe quest message after the previous request with a cause other than "MO-Data" and "MOSignalling" is NO rejected. This timer is started after the UE receives the RRCConnectionRej ect message. This timer is stopped when the UE enters the RRC_CONNECTE D mode or performs cell reselection.
NO
No
LBFD-002007 / TDLBFD-002007
Indicates the length of timer T320 for load balancing. T320 specifies the time period during which the dedicated priorities (used for cell reselection) retain valid. The time period is contained in the RRCConnectionRel ease message that is received by the UE. After T320 NO expires, the dedicated priorities become invalid. This timer is started when the UE receives an RRCConnectionRel ease message containing the t320 IE. This timer is stopped when the UE enters the RRC_CONNECTE D mode.
NO
No
LBFD-002018 / TDLBFD-002018 LBFD-00201803 / TDLBFD-00201803
Indicates the length of timer T304 for intra-RAT handover. If the UE does not complete the handover before this timer expires, NO the UE reverts back to the associated configuration and initiates an RRC connection reestablishment procedure.
NO
No
Indicates the length of timer T304 for inter-RAT handover to GERAN. If the UE does not complete the handover before this timer expires, NO the UE reverts back to the associated configuration and initiates an RRC connection reestablishment procedure. Indicates the length of timer T320 to be contained in RRCConnectionRel ease messages sent for reasons other than load balancing. T320 specifies the time period during which the dedicated priorities (used for cell reselection) are valid. After T320 expires, the dedicated priorities become invalid. NO This parameter is invalid for UEs to be redirected based on the subscriber profile ID (SPID). This timer is started when the UE receives an RRCConnectionRel ease message containing the t320 IE. It is stopped when the UE enters the RRC_CONNECTE D mode.
NO
No
NO
No
Indicates the length of the UE inactivity timer. The eNodeB monitors whether UEs are receiving or sending data. When a UE has neither received nor sent data for a NO duration exceeding this period of time, the eNodeB releases the radio resources for the UE. If this parameter is set to 0, the UE inactivity timer is not used.
NO
No
LBFD-002007 / TDLBFD-002007
Indicates the timer used to govern the period in which the eNodeB maintains uplink synchronization for a UE. After this timer expires, the eNodeB does not send Timing Advance Command to the UE. If this NO parameter is set to 0, this parameter does not take effect and, as a result, the eNodeB will constantly send Timing Advance Command to the UE to maintain uplink synchronization for the UE.
NO
No
LBFD-002007 / TDLBFD-002007
Indicates the ID of the TCE for MDT.
YES
YES
No
None
Indicates the IP address version. IPv4(IPv4 Address) indicates that the NO version is IPv4. IPv6(IPv6 Address) indicates that the version is IPv6.
NO
No
None
Indicates the IPv4 NO address of the TCE.
NO
No
None
Indicates the IPv6 NO address of the TCE.
NO
No
None
Indicates the local ID of the cell. It YES uniquely identifies a cell within a BS. Indicates the switch for adjusting the PA through power control on the PDSCH. If this parameter is set to NO ON, the PA is adjusted dynamically when the channel quality is extremely good or bad.
YES
No
None
NO
No
LBFD-002016 / TDLBFD-002016
Indicates the PA to be used when PA adjustment for PDSCH power control is disabled, NO downlink ICIC is disabled, and the even power distribution is used for the PDSCH.
NO
No
LBFD-002016 / TDLBFD-002016
Indicates the local ID of the cell. It YES uniquely identifies a cell within a BS.
YES
No
None
Indicates the threshold for UEs to enter DRX in the cell that operates in FDD mode. This threshold is used in the DRX algorithm. It is expressed as a proportion of the transmission time intervals (TTIs) with NO data transmission to the total TTIs. If the traffic volume at a UE is equal to or lower than this threshold, the eNodeB decides that the UE should retain its DRX state or enter DRX. Indicates the threshold for UEs to exit DRX in the cell that operates in FDD mode. This threshold is used in the DRX algorithm. It is expressed as a proportion of the transmission time intervals (TTIs) with NO data transmission to the total TTIs. If the traffic volume at a UE is equal to or higher than this threshold, the eNodeB decides that the UE should retain its non-DRX state or exit DRX.
NO
No
LBFD-002017 / TDLBFD-002017
NO
No
LBFD-002017 / TDLBFD-002017
Indicates the uplink traffic volume threshold for UEs to enter DRX in the cell that operates in TDD mode. This threshold is used in the DRX algorithm. It is expressed as a proportion of the transmission time intervals (TTIs) with NO uplink data transmission to the total TTIs. If the traffic volume at a UE is equal to or lower than this threshold, the eNodeB decides that the UE should retain its DRX state or enter DRX. Indicates the uplink traffic volume threshold for UEs to exit DRX in the cell that operates in TDD mode. This threshold is used in the DRX algorithm. It is expressed as a proportion of the transmission time intervals (TTIs) with NO uplink data transmission to the total TTIs. If the traffic volume at a UE is equal to or higher than this threshold, the eNodeB decides that the UE should retain its non-DRX state or exit DRX.
NO
No
LBFD-002017 / TDLBFD-002017
NO
No
LBFD-002017 / TDLBFD-002017
Indicates the downlink traffic volume threshold for UEs to enter DRX in the cell that operates in TDD mode. This threshold is used in the DRX algorithm. It is expressed as a proportion of the transmission time NO intervals (TTIs) with downlink data transmission to the total TTIs. If the traffic volume at a UE is equal to or lower than this threshold, the eNodeB decides that the UE should retain its DRX state or enter DRX. Indicates the downlink traffic volume threshold for UEs to exit DRX in the cell that operates in TDD mode. This threshold is used in the DRX algorithm. It is expressed as a proportion of the transmission time NO intervals (TTIs) with downlink data transmission to the total TTIs. If the traffic volume at a UE is equal to or higher than this threshold, the eNodeB decides that the UE should retain its non-DRX state or exit DRX.
NO
No
LBFD-002017 / TDLBFD-002017
NO
No
LBFD-002017 / TDLBFD-002017
Indicates the length of the UE traffic measurement period. The traffic volume of a UE during this period is measured. Based NO on the measurement result, the DRX algorithm decides whether the UE should enter or exit DRX. Indicates the local ID of the cell. It YES uniquely identifies a cell within a BS. Indicates whether the transmit power of the UE is adjusted according to the difference between MCSs. indication is contained in an RRC message signaled to the UE. In the message,this indication occupies NO one bit. The value 0, which means disabled, indicates that TF is equal to 0 because Ks is equal to 0. The value 1, which means enabled, indicates that TF is calculated on the condition that Ks is equal to 1.25.
NO
No
LBFD-002017 / TDLBFD-002017
YES
No
None
NO
No
LBFD-002026 / TDLBFD-002026
Indicates the power offset of the sounding reference signal to the NO PUSCH when DeltaMcsEnabled is set to UU_DISABLE.
NO
No
LBFD-002026 / TDLBFD-002026
Indicates the power offset of the sounding reference signal to the NO PUSCH when DeltaMcsEnabled is set to UU_ENABLE.
NO
No
LBFD-002026 / TDLBFD-002026
Indicates the alpha filtering coefficient used by the UE during RSRP NO measurement for path loss estimation.
NO
No
LBFD-002026 / TDLBFD-002026
Indicates the local identity of the cell. It uniquely identifies a YES cell within an eNodeB.
YES
No
None
Indicates the measurement object type for distance-based handovers.
NO
NO
No
LOFD-001072 / TDLOFD-001072 LOFD-001073 / TDLOFD-001073 LBFD-00201804 / TDLBFD-00201804
Indicates the threshold for distance-based handovers. If the distance between a UE and the cell NO center is greater than this threshold, a distance-based handover is triggered for this UE.
NO
No
LBFD-00201804 / TDLBFD-00201804 LOFD-001072 / TDLOFD-001072 LOFD-001073 / TDLOFD-001073
YES
No
None
Indicates the ID of the DRX parameter YES group.
YES
No
None
Indicates whether bearers to which the parameter group applies support DRX. The value ON indicates that the bearers support DRX. The value NO OFF indicates that the bearers do not support DRX. A UE can enter the DRX mode only when all bearers running on it support DRX.
NO
No
LBFD-002017 / TDLBFD-002017
Indicates the length of the On Duration Timer. Due to the impact of CQI reporting intervals and SRS transmission NO intervals, there is a possibility that the actual value of this parameter assigned to a UE is larger than the configured value.
NO
No
LBFD-002017 / TDLBFD-002017
Indicates the length of the DRX NO Inactivity Timer.
NO
No
LBFD-002017 / TDLBFD-002017
Indicates the length of the DRX NO Retransmission Timer.
NO
No
Indicates the length of a long DRX NO cycle.
NO
No
LBFD-002017 / TDLBFD-002017
Indicates whether short DRX cycles are enabled.
NO
NO
No
LBFD-002017 / TDLBFD-002017
Indicates the length of a short DRX NO cycle.
NO
No
LBFD-002017 / TDLBFD-002017
Indicates the length of the DRX Short Cycle Timer. If this parameter is set to 1, the length of this timer is one short DRX cycle. If this parameter is set to 2, the length of this timer is two short NO DRX cycles. If this parameter is set to a large value, a UE for which short DRX cycles are enabled stays in short-cycle DRX for a long time. For details, see 3GPP TS 36.321 5.7.
NO
No
LBFD-002017 / TDLBFD-002017
YES
No
LBFD-001001 / TDLBFD-001001
Indicates the ID of the common parameter group YES related to inter-RAT handover.
YES
No
LOFD-001019 / TDLOFD-001019 LOFD-001020 / TDLOFD-001020 LOFD-001021 LOFD-001022 / TDLOFD-001022 LOFD-001023 / TDLOFD-001023
Indicates the hysteresis for interRAT measurement events A1 and A2. This parameter is used to prevent frequent triggering of event evaluation caused by radio NO signal fluctuation. In this way, the probability of pingpong handovers or handover decision errors is reduced. A larger value of this parameter results in a lower probability.
NO
No
Indicates the time-totrigger for inter-RAT measurement event A1 or A2. When detecting that the signal quality in the serving cell meets the entering condition, the UE does not send a measurement report to the eNodeB immediately. Instead, the UE sends a report only when the signal quality continuously NO meets the entering condition during the time-to-trigger. This parameter helps decrease the number of occasionally triggered event reports, the average number of handovers, and the number of wrong handovers. In summary, it helps prevent unnecessary handovers.
NO
No
LOFD-001023 / TDLOFD-001023 LOFD-001022 / TDLOFD-001022 LOFD-001019 / TDLOFD-001019 LOFD-001020 / TDLOFD-001020 LOFD-001021
Indicates the RSRP threshold for interRAT measurement event A1. When the measured RSRP NO value of the serving cell exceeds this threshold, an event A1 report will be sent.
NO
No
LOFD-001023 / TDLOFD-001023 LOFD-001019 / TDLOFD-001019 LOFD-001020 / TDLOFD-001020 LOFD-001021 LOFD-001022 / TDLOFD-001022
Indicates the RSRQ threshold for interRAT measurement event A1. When the measured RSRQ NO value of the serving cell exceeds this threshold, an event A1 report will be sent.
NO
No
Indicates the RSRP threshold for interRAT measurement event A2. When the measured RSRP NO value of the serving cell is below this threshold, an event A2 report will be sent.
NO
No
Indicates the RSRQ threshold for interRAT measurement event A2. When the measured RSRQ NO value of the serving cell is below this threshold, an event A2 report will be sent.
NO
No
Indicates the offset of the A2 threshold for inter-RAT blind redirection against NO the A2 threshold for inter-RAT handovers.
NO
No
LBFD-002018
YES
No
LBFD-001001 / TDLBFD-001001
Indicates the ID of the parameter group related to YES inter-RAT handover to CDMA2000 1xRTT.
YES
No
LOFD-001021
Indicates the hysteresis for event B1 for inter-RAT handover to CDMA2000 1xRTT. This parameter is used to prevent frequent triggering of event evaluation caused by radio signal fluctuation. In this way, the NO probability of pingpong handovers or handover decision errors is reduced. A larger value of this parameter results in a lower probability of ping-pong handovers or handover decision errors.
NO
No
LOFD-001021
Indicates the pilot strength threshold for event B1 related to coverage-based inter-RAT handover to CDMA2000 NO 1xRTT. When the measurement value exceeds this threshold, a measurement report will be sent.
NO
No
LOFD-001021
Indicates the time-totrigger for event B1 related to inter-RAT handover to CDMA2000 1xRTT. When detecting that the signal quality in at least one neighboring cell meets the entering condition, the UE does not send a measurement report to the eNodeB immediately. Instead, the UE sends a report only NO when the signal quality continuously meets the entering condition during the time-to-trigger. This parameter helps decrease the number of occasionally triggered event reports, the average number of handovers and the number of wrong handovers, preventing unnecessary Indicates the pilot strength threshold for event B1 related to load- or servicebased inter-RAT handover to CDMA2000 1xRTT. NO When the measurement value exceeds this threshold, a measurement report will be sent.
NO
No
LOFD-001021
NO
No
LOFD-001021
Indicates the extended QCI.
YES
YES
No
YES
No
LBFD-001001 / TDLBFD-001001
Indicates the ID of a parameter group related to interNO frequency handover.
NO
No
LBFD-00201802 / TDLBFD-00201802
Indicates the ID of a parameter group related to inter-RAT NO handover to CDMA2000 1xRTT.
NO
No
LOFD-001021
Indicates the ID of a parameter group related to inter-RAT NO handover to CDMA2000 HRPD.
NO
No
LOFD-001021
Indicates the ID of a group of common parameters related NO to inter-RAT handover.
NO
No
LOFD-001019 / TDLOFD-001019 LOFD-001020 / TDLOFD-001020 LOFD-001021
Indicates the ID of a parameter group related to inter-RAT NO handover to GERAN.
NO
No
LOFD-001020 / TDLOFD-001020
Indicates the ID of a parameter group related to inter-RAT NO handover to UTRAN.
NO
No
LOFD-001019 / TDLOFD-001019
Indicates the ID of a parameter group related to intraNO frequency handover.
NO
No
LBFD-00201801 / TDLBFD-00201801
Indicates the ID of a DRX parameter NO group.
NO
No
LBFD-002017 / TDLBFD-002017
YES
No
LBFD-001001 / TDLBFD-001001
Indicates the QoS class identifier (QCI) of an evolved packet system (EPS) bearer. Different QCIs indicate different QoS requirements, YES such as the packet delay budget, packet error loss rate, and resource type. For details, see Table 6.1.7 in 3GPP TS 23.203. Indicates the ID of a parameter group related to interNO frequency handovers. Indicates the ID of a parameter group related to inter-RAT NO handover to CDMA2000 1xRTT. Indicates the ID of a parameter group related to inter-RAT NO handover to CDMA2000 HRPD.
YES
No
NO
No
LBFD-00201802 / TDLBFD-00201802
NO
No
LOFD-001021
NO
No
LOFD-001021
Indicates the ID of a common parameter NO group related to inter-RAT handover.
NO
No
Indicates the ID of a parameter group related to inter-RAT NO handover to GERAN.
NO
No
LOFD-001020 / TDLOFD-001020
Indicates the ID of a parameter group related to inter-RAT NO handover to UTRAN. Indicates the ID of a parameter group related to intraNO frequency handover.
NO
No
LOFD-001019 / TDLOFD-001019
NO
No
LBFD-00201801 / TDLBFD-00201801
Indicates the ID of a DRX parameter NO group.
NO
No
LBFD-002017 / TDLBFD-002017
Indicates the interval at which NO scheduling request indicators are sent.
NO
No
YES
No
LBFD-001001 / TDLBFD-001001
Indicates the ID of the parameter group related to YES inter-RAT handover to CDMA2000 HRPD.
YES
No
LOFD-001021
Indicates the hysteresis for event B1 related to interRAT handover to CDMA2000 HRPD. This parameter is used to prevent frequent triggering of event evaluation caused by radio signal fluctuation. In this way, the NO probability of pingpong handovers or handover decision errors is reduced. A larger value of this parameter results in a lower probability of ping-pong handovers or handover decision errors.
NO
No
LOFD-001021
Indicates the pilot strength threshold for event B1 related to load- or servicebased inter-RAT handover to CDMA2000 HRPD. NO When the measurement value exceeds this threshold, a measurement report will be sent. Indicates the time-totrigger for event B1 related to inter-RAT handover to CDMA2000 HRPD. When detecting that the signal quality in at least one neighboring cell meets the entering condition, the UE does not send a measurement report to the eNodeB immediately. Instead, the UE sends a report only NO when the signal quality continuously meets the entering condition during the time-to-trigger. This parameter helps decrease the number of occasionally triggered event reports, the average number of handovers and the number of wrong handovers, preventing unnecessary
NO
No
LOFD-001021
NO
No
LOFD-001021
Indicates the pilot strength threshold for event B1 related to load- or servicebased inter-RAT handover to CDMA2000 HRPD. NO When the measurement value exceeds this threshold, a measurement report will be sent.
NO
No
LOFD-001021 LOFD-001032 / TDLOFD-001032
YES
No
LBFD-001001 / TDLBFD-001001
Indicates the ID of the parameter group related to YES inter-RAT handover to GERAN.
YES
No
Indicates the hysteresis for event B1 related to interRAT handover to GERAN. This parameter is used to prevent frequent triggering of event evaluation caused by radio signal fluctuation. In this way, the probability NO of ping-pong handovers or handover decision errors is reduced. A larger value of this parameter results in a lower probability of ping-pong handovers or handover decision errors.
NO
No
Indicates the RSSI threshold for event B1 related to coverage-based inter-RAT handover to GERAN. A UE sends a measurement report related to event B1 NO to the eNodeB when the RSSI in at least one GERAN cell exceeds this threshold and other triggering conditions are met. For details, see 3GPP TS 36.331.
NO
No
Indicates the time-totrigger for event B1 related to inter-RAT handover to GERAN. When detecting that the signal quality in at least one neighboring cell meets the entering condition, the UE does not send a measurement report to the eNodeB immediately. Instead, the UE sends a report only NO when the signal quality continuously meets the entering condition during the time-to-trigger. This parameter helps decrease the number of occasionally triggered event reports, the average number of handovers and the number of wrong handovers, preventing unnecessary
NO
No
Indicates the RSSI threshold for event B1 related to loador service-based inter-RAT handover to GERAN. NO When the measured RSSI value exceeds this threshold, a measurement report will be sent.
NO
No
YES
No
LBFD-001001 / TDLBFD-001001
Indicates the ID of the parameter group related to YES inter-RAT handover to UTRAN.
YES
No
Indicates the Ec/No threshold for event B1 related to coverage-based inter-RAT handover to UTRAN. This parameter specifies the requirement for Ec/No of the target UTRAN cell. For a cell with large signal fading variance, set this parameter to a large value to prevent unnecessary NO handovers. For a cell with small signal fading variance, set this parameter to a small value to ensure timely handovers. A large value of this parameter results in a low probability of handover to the UTRAN cell, and a small value leads to a high probability. When the measurement value Indicates the RSCP threshold for event B1 related to coverage-based inter-RAT handover to UTRAN. This parameter specifies the requirement for NO RSCP of the target UTRAN cell. When the measurement value exceeds this threshold, a measurement report will be sent.
NO
No
NO
No
Indicates the hysteresis for event B1 related to interRAT handover to UTRAN. This parameter is used to prevent frequent triggering of event evaluation caused by radio signal fluctuation. In this way, the probability NO of ping-pong handovers or handover decision errors is reduced. A larger value of this parameter results in a lower probability of ping-pong handovers or handover decision errors.
NO
No
Indicates the time-totrigger for event B1 related to inter-RAT handover to UTRAN. When detecting that the signal quality in at least one neighboring cell meets the entering condition, the UE does not send a measurement report to the eNodeB immediately. Instead, the UE sends a report only NO when the signal quality continuously meets the entering condition during the time-to-trigger. This parameter helps decrease the number of occasionally triggered event reports, the average number of handovers and the number of wrong handovers, preventing unnecessary
NO
No
Indicates the Ec/No threshold for event B1 related to loador service-based inter-RAT handover to UTRAN. This parameter specifies the requirement for Ec/No of the target UTRAN cell. When the measurement value exceeds this threshold, a measurement report NO may be sent. For a cell with large signal fading variance, set this parameter to a large value to prevent unnecessary handovers. For a cell with small signal fading variance, set this parameter to a small value to ensure timely handovers. Indicates the RSCP threshold for event B1 related to loador service-based inter-RAT handover to UTRAN. This parameter specifies the requirement for NO RSCP of the target UTRAN cell. When the measurement value exceeds this threshold, a measurement report will be sent.
NO
No
NO
No
YES
No
LBFD-001001 / TDLBFD-001001
Indicates the ID of the parameter group related to inter-frequency handover.
YES
YES
No
Indicates the hysteresis for interfrequency measurement events A1 and A2. This parameter is used to prevent frequent triggering of event evaluation caused by radio NO signal fluctuation. In this way, the probability of pingpong handovers or handover decision errors is reduced. A larger value of this parameter results in a lower probability.
NO
No
LBFD-00201802 / TDLBFD-00201802
Indicates the time-totrigger for interfrequency measurement event A1 or A2. When detecting that the signal quality in the serving cell meets the triggering condition, the UE does not send a measurement report to the eNodeB immediately. Instead, the UE sends a report only when the signal NO quality continuously meets the entering condition during the time-to-trigger. This parameter helps decrease the number of occasionally triggered event reports, the average number of handovers, and the number of wrong handovers. In summary, it helps prevent unnecessary
NO
No
LBFD-00201802 / TDLBFD-00201802
Indicates the RSRP threshold for interfrequency measurement event A1. When the NO measured RSRP value exceeds this threshold, a measurement report will be sent.
NO
No
LBFD-00201802 / TDLBFD-00201802
Indicates the RSRQ threshold for interfrequency measurement event A1. When the NO measured RSRQ value exceeds this threshold, a measurement report will be sent.
NO
No
LBFD-00201802 / TDLBFD-00201802
Indicates the RSRP threshold for interfrequency measurement event A2. When the NO measured RSRP value is below the threshold, a measurement report will be sent.
NO
No
LBFD-00201802 / TDLBFD-00201802
Indicates the RSRQ threshold for interfrequency measurement event A2. When the NO measured RSRQ value is below this threshold, a measurement report may be sent.
NO
No
LBFD-00201802 / TDLBFD-00201802
Indicates the hysteresis for event A4. This parameter is used to prevent frequent triggering of event evaluation caused by radio signal fluctuation. In NO this way, the probability of pingpong handovers or handover decision errors is reduced. A larger value of this parameter results in a lower probability.
NO
No
LBFD-00201802 / TDLBFD-00201802
Indicates the RSRP threshold for event A4 related to coverage-based inter-frequency handover. When the measured NO RSRP value exceeds this threshold, an interfrequency measurement report will be sent.
NO
No
LBFD-00201802 / TDLBFD-00201802
Indicates the RSRQ threshold for event A4 related to coverage-based inter-frequency handover. When the measured NO RSRQ value exceeds this threshold, an interfrequency measurement report will be sent.
NO
No
LBFD-00201802 / TDLBFD-00201802
Indicates the time-totrigger for event A4 for the interfrequency handover. When detecting that the signal quality in at least one neighboring cell meets the entering condition, the UE does not send a measurement report to the eNodeB immediately. Instead, the UE sends a report only NO when the signal quality continuously meets the entering condition during the time-to-trigger. This parameter helps decrease the number of occasionally triggered event reports, the average number of handovers, and the number of wrong handovers. In summary, it helps prevent
NO
No
LBFD-00201802 / TDLBFD-00201802
Indicates the RSRP threshold for event A4 related to loador frequency-prioritybased interfrequency handover. When NO the measured RSRP value exceeds this threshold, an interfrequency measurement report will be sent.
NO
No
LOFD-001032 / TDLOFD-001032
Indicates the RSRQ threshold for event A4 related to loador frequency-prioritybased interfrequency handover. When NO the measured RSRQ value exceeds this threshold, an interfrequency measurement report will be sent.
NO
No
LOFD-001032 / TDLOFD-001032
Indicates the RSRP threshold for frequency-prioritybased interfrequency measurement event A1. When the measured RSRP value exceeds this threshold, an event A1 report will be NO sent. The value 141 does not take effect, and is reserved for backward compatibility. If this parameter is set to 141, the value -140 is used as the threshold in implementation.
NO
No
None
Indicates the RSRQ threshold for frequency-prioritybased interfrequency measurement event A1. NO When the measured RSRQ value exceeds this threshold, an event A1 report may be sent. Indicates the offset for event A3 associated with inter-frequency handover. This parameter determines the border between the serving cell and the neighboring cell. If the parameter is set to a large value, an inter-frequency NO handover is performed only when the signal quality of the neighboring cell is significantly better than that of the serving cell and other triggering conditions are met. For details, see 3GPP TS 36.331.
NO
No
None
NO
No
LBFD-00201802
Indicates the RSRP threshold for event A1 associated with event-A3-triggered inter-frequency handover. NO When the measured RSRP value exceeds this threshold, a measurement report will be sent.
NO
No
LBFD-00201802
Indicates the RSRP threshold for event A2 associated with event-A3-triggered inter-frequency handover. When NO the measured RSRP value is below the threshold, a measurement report will be sent.
NO
No
LBFD-00201802
Indicates the RSRP threshold for frequency-prioritybased interfrequency measurement event NO A2. If the measured RSRP value is less than this threshold, an event A2 report will be sent.
NO
No
None
Indicates the RSRQ threshold for interfrequency measurement event A2. When the NO measured RSRQ value is below this threshold, a measurement report will be sent.
NO
No
None
YES
No
LBFD-001001 / TDLBFD-001001
Indicates the ID of the parameter group related to intra-frequency handover.
YES
YES
No
Indicates the hysteresis for event A3 associated with intra-frequency handover. This parameter prevents frequent triggering of event evaluation due to radio signal fluctuations. This reduces the probability of pingpong handovers or NO handover decision errors. A larger value of this parameter results in a lower probability. The hysteresis for event A3 associated with inter-frequency handover is the same as the value of this parameter. For details, see 3GPP TS 36.331.
NO
No
Indicates the offset for event A3. If the parameter is set to a large value, an intra-frequency handover is performed only when the signal quality of the NO neighboring cell is significantly better than that of the serving cell and other triggering conditions are met. For details, see 3GPP TS 36.331.
NO
No
LBFD-00201801 / TDLBFD-00201801
Indicates the time-totrigger for event A3 associated with intra-frequency handover. When the UE detects that the signal quality in the serving cell and that in at least one neighboring cell meet the entering condition, it does not immediately send a measurement report to the eNodeB. NO Instead, the UE sends a report only when the signal quality meets the entering condition throughout the timeto-trigger. This parameter helps decrease the number of occasionally triggered event reports, the average number of handovers, and the number of incorrect handovers,
NO
No
LBFD-00201801 / TDLBFD-00201801
YES
YES
No
Indicates the name of the operator. The name is a string of a maximum of 32 characters. The string cannot be all null characters or contain any of the following characters: double quotation marks ("), NO commas (,), semicolons (;), equal signs (=), single quotation marks ('), three consecutive plus signs (+++), two or more consecutive spaces, and two or more consecutive percent signs (%). Indicates the type of the operator. The operator can be the primary operator or a secondary operator. For each NO eNodeB, only one primary operator but more than one secondary operator can be configured. Indicates the mobile country code (MCC) NO of the operator. Indicates the mobile network code (MNC) of the operator. The value of this parameter is NO a string of two or three characters, each of which must be a digit in the range from 0 to 9.
YES
No
None
YES
No
YES
No
None
YES
No
None
Indicates the ID of the IP path.
YES
YES
No
None
NO
YES
No
Indicates the tracking area ID, which uniquely YES identifies an entry of tracking area information.
YES
No
NO
YES
No
Indicates the tracking area code (TAC), which is used by the EPC to determine the area within which paging messages are sent. One tracking area is comprised of one or more cells. Two TAC values NO 0x0000(0) and 0xFFFE(65534) are reserved according to the protocol and will not be used in future versions. Therefore, do not use 0 or 65534 as a TAC value in TAC planning or configuration. Indicates the index of the operator.
YES
No
YES
YES
No
Indicates whether to enable or disable emergency calls. It is recommended that this parameter NO be set to a value in accordance with the actual emergency call capability of the operator. Indicates whether the operator supports emergency calls initiated by UEs in limited mode. Indicates the Allocation and Retention Priority (ARP) value of the dedicated emergency call bearer.
NO
No
LBFD-002028 / TDLBFD-002028
NO
NO
No
LBFD-002028 / TDLBFD-002028
NO
NO
No
LBFD-002028 / TDLBFD-002028
Indicates the Allocation and Retention Priority (ARP) value of the default emergency call bearer.
NO
NO
No
LBFD-002028 / TDLBFD-002028
Indicates the eNodeB sharing mode, which can be independent Operator Mode, NO Shared Frequency Sharing Mode, or Separate Frequency Sharing Mode.
NO
No
YES
YES
No
Indicates the proportion of the maximum number of users for the operator at the shared eNodeB. This parameter must be set according to the contract signed by the operators.
NO
YES
No
LOFD-001036 / TDLOFD-001036 LOFD-001037 / TDLOFD-001037 LBFD-004014
Indicates the minimum length of NO the S1 reestablishment timer. Indicates the maximum length of NO the S1 reestablishment timer.
NO
No
None
NO
No
None
Indicates the ID of the S1 interface.
YES
YES
No
LOFD-001018 / TDLOFD-001018
Indicates the ID of the Stream Control Transmission Protocol (SCTP) link on the S1 interface. Indicates the ID of the operator that owns the S1 interface.
NO
YES
No
LOFD-001018 / TDLOFD-001018
NO
YES
No
Indicates the compliance protocol release of the MME to which the eNodeB is connected through the S1 interface. The value of this parameter must be the same as the MME-complied protocol release. The eNodeB sends S1 messages NO complying with the protocol release specified by this parameter. If the parameter value is different from the MME-complied protocol release, the way in which the MME handles these message is subject to the MME implementation.
NO
No
LBFD-001001 / TDLBFD-001001
Indicates whether the S1 interface is blocked.
NO
NO
No
None
Indicates the status NO of the S1 interface. Indicates the status of the SCTP link on NO the S1 interface. Indicates whether the MME connected NO to the eNodeB is overloaded. Indicates the number of users NO that have accessed the S1 interface. Indicates the name of the MME to which the eNodeB NO is connected through the S1 interface. Indicates the IDs of all served PLMNs of the MMEs to which the eNodeB is connected. The ID NO of a served PLMN consists of the MCC and MNC. PLMN IDs are separated by commas (,). Indicates the Global Unique MME Identifiers (GUMMEIs) of all MMEs to which the eNodeB is connected. A GUMMEI of a NO serving MME consists of the MCC, MNC, MME group ID, and MME code. GUMMEIs are separated by commas (,).
NO
Yes
None
NO
Yes
None
NO
Yes
LOFD-001018 / TDLOFD-001018
NO
Yes
None
NO
Yes
None
NO
Yes
NO
Yes
None
Indicates the load of the connected MME relative to that of other MMEs. A NO larger value of this parameter indicates a larger capacity allowing UE access.
NO
Yes
None
Indicates the reason of the Fault on the NO S1 link.
NO
Yes
None
Indicates the ID of an S1 interface.
YES
YES
No
None
Indicates whether the MME at the other end of the S1 interface supports Huawei-proprietary positioning procedures, which are included in minimization of drive tests (MDT). The value DISABLE indicates that the NO MME does not support the procedures and therefore the eNodeB cannot obtain UE location information from the MME through the procedures. The value ENABLE indicates the opposite. Indicates the mobile country code of the neighboring eNodeB to be added to the list. The value of this YES parameter is a string of three characters, each of which must be a digit in the range of 0 to 9. Indicates the mobile network code of the neighboring eNodeB to be added to the list. The value of this YES parameter is a string of two or three characters, each of which must be a digit in the range of 0 to 9.
NO
No
None
YES
No
None
YES
No
None
Indicates the ID of the neighboring eNodeB to be added to the list.
YES
YES
No
None
Indicates whether the list is a blacklist NO or whitelist.
NO
No
None
Indicates the ID of the X2 interface.
YES
YES
No
Indicates the ID of the Stream Control Transmission Protocol (SCTP) link on the X2 interface. Indicates the ID of the operator that owns the X2 interface.
NO
YES
No
None
NO
YES
No
Indicates the protocol release NO with which the peer eNodeB complies.
NO
No
LBFD-001001 / TDLBFD-001001
Indicates whether the X2 interface can be automatically removed when the peer-eNodeB configuration is deleted. This parameter is valid only when peereNodeB information for SON is configured. This parameter will be NO removed in later versions. In this version, the setting of this parameter is still synchronized between the M2000 and the eNodeB, but it is no longer used internally. Therefore, avoid using this parameter. Indicates the ID of the neighboring eNodeB to which the local eNodeB is connected through the X2 interface. The combination of NO this parameter and NbrEnbPlmnId uniquely identifies the neighboring eNodeB around the globe. Indicates the PLMN ID of the neighboring eNodeB to which NO the local eNodeB is connected through the X2 interface. Indicates the status NO of the X2 interface.
NO
No
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
Indicates the reason why the X2 interface NO is abnormal.
NO
Yes
None
Indicates the DRX switch.
NO
NO
No
LBFD-002017 / TDLBFD-002017
Indicates whether to enable or disable short DRX cycles. NO Short DRX cycles reduce the traffic delay.
NO
No
LBFD-002017 / TDLBFD-002017
Indicates the length of a long DRX cycle that is applied only to non-powersaving UEs whose subscriber profile ID for RAT/frequency priority (RFSP) indexes are contained in the RFSP index set. NO Due to the impact of CQI reporting periods and SRS transmission periods, the actual value of this parameter assigned to a UE may be less than the configured value.
NO
No
LBFD-002017 / TDLBFD-002017
Indicates the length of the On Duration Timer that applies only to non-powersaving UEs whose RFSP indexes are contained in the RFSP index set. For details about this timer, see 3GPP TS 36.321. Due to the NO impact of CQI reporting intervals and SRS transmission intervals, there is a possibility that the actual value of this parameter assigned to a UE is larger than the configured value.
NO
No
LBFD-002017 / TDLBFD-002017
Indicates the length of the DRX Inactivity Timer that applies only to nonpower-saving UEs whose RFSP NO indexes are contained in the RFSP index set. For details about this timer, see 3GPP TS 36.321.
NO
No
LBFD-002017 / TDLBFD-002017
Indicates whether to enable or disable short DRX cycles for non-powerNO saving UEs whose RFSP indexes are contained in the RFSP index set.
NO
No
LBFD-002017 / TDLBFD-002017
Indicates the length of a short DRX cycle that applies only to non-powerNO saving UEs whose RFSP indexes are contained in the RFSP index set.
NO
No
LBFD-002017 / TDLBFD-002017
Indicates the length of the DRX Short Cycle Timer that applies only to nonpower-saving UEs whose RFSP indexes are contained in the RFSP index set. The length of this timer is expressed in the number of NO short DRX cycles. If this parameter is set to 1, the length of this timer is one short DRX cycle. If this parameter is set to 2, the length of this timer is two short DRX cycles. For details, see 3GPP TS 36.321 5.7.
NO
No
LBFD-002017 / TDLBFD-002017
Indicates the long DRX cycle for intraRAT ANR. If intraRAT ANR is enabled, this NO parameter takes effect regardless of whether DRX is enabled.
NO
No
LBFD-002017
Indicates the long DRX cycle for interRAT ANR. If interRAT ANR is enabled, this NO parameter is valid regardless of whether DRX is enabled.
NO
No
LBFD-002017 / TDLBFD-002017
Indicates the extended QoS Class Identifier (QCI), which is required by the operator for user differentiation.
YES
YES
No
Indicates the service type corresponding to the extended QCI.
NO
NO
No
Indicates the weight factor used in the calculation of NO connection priorities during uplink scheduling. Indicates the weight factor used in the calculation of NO connection priorities during downlink scheduling.
NO
No
NO
No
Indicates the uplink minimum guaranteed bit rate NO of the non-GBR service.
NO
No
Indicates the downlink minimum guaranteed bit rate of the non-GBR service.
NO
NO
No
Indicates the preallocation weight. The pre-allocation weight of a UE is the pre-allocation weight of services carried by the highest-priority logical channel. If services carried by highest-priority logical channels have different preallocation weights, the UE takes the highest preNO allocation weight. When resources are insufficient, preallocation weights affect the preallocation probabilities of users. The preallocation probability has a positive correlation with the preallocation weight. This parameter is QCI-specific.
NO
No
Indicates the group ID of the parameters related NO to the inter-RAT handover with the extended QCI.
NO
No
LOFD-001019 / TDLOFD-001019 LOFD-001020 / TDLOFD-001020 LOFD-001021 LOFD-001022 / TDLOFD-001022 LOFD-001023 / TDLOFD-001023 LOFD-001043 / TDLOFD-001043 LOFD-001045 / TDLOFD-001045 LOFD-001044 / TDLOFD-001044 LOFD-001046 / TDLOFD-001046 LOFD-001033 / TDLOFD-001033 LOFD-001034 / TDLOFD-001034 LOFD-001035
Indicates the prioritized bit rate of the logical channel. The UE scheduler guarantees prioritized bit rates NO of logical channels in descending order of logical channel priority. For details, see 3GPP TS 36.321.
NO
No
Indicates the priority of the logical channel. The UE scheduler guarantees prioritized bit rates of logical channels in descending order of logical channel priority. Resources NO are allocated in descending order of logical channel priority after the prioritized bit rates of all services are guaranteed. For details, see 3GPP TS 36.321. Indicates the ID of an RLC/PDCP parameter group.
NO
No
NO
NO
No
LBFD-002008 / TDLBFD-002008
Indicates whether the extended QCI is NO specific to free users or paid users.
NO
No
Indicates whether to enable flow control NO for the QCI.
NO
No
Indicates the group ID of the parameters related YES to the inter-RAT handover with a specific QCI.
YES
No
LOFD-001019 / TDLOFD-001019 LOFD-001020 / TDLOFD-001020 LOFD-001021 LOFD-001022 / TDLOFD-001022 LOFD-001023 / TDLOFD-001023 LOFD-001032 / TDLOFD-001032 LOFD-001043 / TDLOFD-001043 LOFD-001045 / TDLOFD-001045 LOFD-001044 / TDLOFD-001044 LOFD-001046 / TDLOFD-001046 LOFD-001033 / TDLOFD-001033 LOFD-001034 / TDLOFD-001034 LOFD-001035
PS_HO: Indicates the switch used to enable or disable the QCI-specific PS handover to UTRAN. If this switch is set to On, the UE can perform the PS handover to the UTRAN cell. If this switch is set to Off, the UE cannot perform the PS handover to the UTRAN cell. SRVCC: Indicates NO the switch used to enable or disable the QCI-specific SRVCC handover to UTRAN. If this switch is set to On, the UE can perform the SRVCC handover to the UTRAN cell. If this switch is set to Off, the UE cannot perform the SRVCC handover to the UTRAN cell. REDIRECTION: Indicates the switch Indicates the switch used to enable or disable the single radio voice call continuity (SRVCC) handover to GERAN GSM. If this switch is set to On, the UE can NO perform the SRVCC handover to the GERAN GSM cell. If this switch is set to Off, the UE cannot perform the SRVCC handover to the GERAN GSM cell.
NO
No
NO
No
LOFD-001023 / TDLOFD-001023
Indicates the policy of handovers to GPRS/EDGE. PS_HO: Indicates whether PS handovers to neighboring GPRS/EDGE cells are allowed. NACC_HO: Indicates whether NACC handovers to neighboring GPRS/EDGE cells are allowed. This switch will be removed in the later NO versions. In this version, the setting of this switch is still synchronized between the M2000 and the eNodeB, but it is no longer used internally. Therefore, avoid using this parameter. CCO_HO: Indicates whether CCO handovers to neighboring GPRS/EDGE cells are allowed. Indicates the switch used to enable or disable QCI-specific SRVCC to CDMA2000 1xRTT. If this switch is turned on, UEs can perform SRVCC to NO CDMA2000 1xRTT cells. If this switch is turned off, UEs cannot perform SRVCC to CDMA2000 1xRTT cells.
NO
No
LOFD-001020 / TDLOFD-001020
NO
No
LOFD-001021
PS_HO: Indicates the switch used to enable or disable the QCI-specific PS handover to CDMA2000 HRPD. If this switch is set to On, the UE can perform the PS handover to the CDMA2000 HRPD cell. If this switch is set to Off, the UE cannot perform the PS handover to the CDMA2000 HRPD NO cell. OMT_HO: Indicates the switch used to enable or disable the QCI-specific OMT handover to CDMA2000 HRPD. If this switch is set to On, the UE can perform the OMT handover to the CDMA2000 HRPD cell. If this switch is set to Off, the UE cannot perform the OMT handover to
NO
No
LOFD-001021
Indicates whether to permit or forbid the NO inter-RAT handover under the QCI.
NO
No
LOFD-001019 / TDLOFD-001019 LOFD-001020 / TDLOFD-001020 LOFD-001021 LOFD-001022 / TDLOFD-001022 LOFD-001023 / TDLOFD-001023 LOFD-001032 / TDLOFD-001032 LOFD-001043 / TDLOFD-001043 LOFD-001045 / TDLOFD-001045 LOFD-001044 / TDLOFD-001044 LOFD-001046 / TDLOFD-001046 LOFD-001033 / TDLOFD-001033 LOFD-001034 / TDLOFD-001034 LOFD-001035
Indicates whether to allow or prohibit the NO fast ANR under the QCI.
NO
No
LOFD-002001 / TDLOFD-002001 LOFD-002002
Indicates the index mapped to the MCS offset for channel quality indicators NO (CQIs) transmitted with data on PUSCH.
NO
No
None
Indicates the index mapped to the MCS offset for rank indications (RIs) transmitted with data on PUSCH. The protocol does not recommend the values 13, 14, and NO 15. If this parameter is set to 13, 14, or 15, If this value is used, the UE performance may deteriorate. For details, see 3GPP TS 36.213. Indicates the index mapped to the MCS offset for acknowledgments (ACKs) transmitted with data on PUSCH. The protocol does not recommend the NO value 15. If this parameter is set to 15, If this value is used, the UE performance may deteriorate. For details, see 3GPP TS 36.213.
NO
No
None
NO
No
None
Indicates the ID of the RLC/PDCP parameter group.
YES
YES
No
LBFD-002008 / TDLBFD-002008
Indicates the length of the PDCP NO discard timer.
NO
No
LBFD-002008 / TDLBFD-002008
Indicates the RLC transmission mode. Only the AM and NO UM modes are available.
NO
No
LBFD-002008 / TDLBFD-002008
Indicates the UEspecific maximum number of RLC ARQ retransmissions, namely the maximum number of AM PDU NO retransmissions. When the number of retransmissions reaches the value of this parameter, RRC connection reestablishment is initiated.
NO
No
LBFD-002008 / TDLBFD-002008
Indicates the eNodeB-specific maximum number of RLC ARQ retransmissions, namely the maximum number of AM PDU NO retransmissions. When the number of retransmissions reaches the value of this parameter, RRC connection reestablishment is initiated.
NO
No
LBFD-002008 / TDLBFD-002008
Indicates the UEspecific data volume threshold of PDUs to trigger polling. When the transmitted data NO volume reaches the value of this parameter, the Poll flag is set in the PDU header.
NO
No
LBFD-002008 / TDLBFD-002008
Indicates the eNodeB-specific data volume threshold of PDUs to trigger polling. When the NO transmitted data volume reaches the value of this parameter, the Poll flag is set in the PDU header.
NO
No
LBFD-002008 / TDLBFD-002008
Indicates the UEspecific number of PDUs to trigger polling. When the transmitted number NO of PDUs reaches the value of this parameter, the Poll flag is set in the PDU header.
NO
No
LBFD-002008 / TDLBFD-002008
Indicates the eNodeB-specific number of PDUs to trigger polling. When the transmitted number NO of PDUs reaches the value of this parameter, the Poll flag is set in the PDU header.
NO
No
LBFD-002008 / TDLBFD-002008
Indicates the length of the Polling PDU NO retransmission timer for the UE.
NO
No
LBFD-002008 / TDLBFD-002008
Indicates the length of the Polling PDU NO retransmission timer for the eNodeB.
NO
No
LBFD-002008 / TDLBFD-002008
Indicates the length of the UE-specific timer for prohibiting NO status reporting from the receiver in AM.
NO
No
LBFD-002008 / TDLBFD-002008
Indicates the length of the eNodeBspecific timer for NO prohibiting status reporting from the receiver in AM.
NO
No
LBFD-002008 / TDLBFD-002008
Indicates the length of the UE-specific timer for reordering NO at the receiver in AM.
NO
No
LBFD-002008 / TDLBFD-002008
Indicates the length of the eNodeBspecific timer for NO reordering at the receiver in AM.
NO
No
LBFD-002008 / TDLBFD-002008
Indicates the length of a PDCP sequence number NO of a UL DRB in RLC UM.
NO
No
LBFD-002008 / TDLBFD-002008
Indicates the length of a UL RLC sequence number NO in UM. The length is permanently 10 bits in AM.
NO
No
LBFD-002008 / TDLBFD-002008
Indicates the length of a DL RLC sequence number NO in UM. The length is permanently 10 bits in AM.
NO
No
LBFD-002008 / TDLBFD-002008
Indicates the length of the UE-specific timer for reordering NO at the receiver in UM.
NO
No
LBFD-002008 / TDLBFD-002008
Indicates the length of the eNodeBspecific timer for NO reordering at the receiver in UM.
NO
No
LBFD-002008 / TDLBFD-002008
Indicates whether a PDCP status report NO is required upon handover in AM.
NO
No
LBFD-002008 / TDLBFD-002008
Indicates the QoS Class Identifier (QCI) of an EPS bearer. Different QCIs represent different QoS specifications such as the packet delay YES budget, packet error loss rate, and resource type (whether the service is a GBR service or not). For details, see Table 6.1.7 in 3GPP TS 23.203. Indicates the weight factor used in the calculation of NO connection priorities during uplink scheduling. Indicates the weight factor used in the calculation of NO connection priorities during downlink scheduling.
YES
No
NO
No
NO
No
Indicates the uplink minimum guaranteed bit rate NO of the non-GBR service.
NO
No
Indicates the downlink minimum guaranteed bit rate of the non-GBR service.
NO
NO
No
Indicates the preallocation weight. The pre-allocation weight of a UE is the pre-allocation weight of services carried by the highest-priority logical channel. If services carried by highest-priority logical channels have different preallocation weights, the UE takes the highest preNO allocation weight. When resources are insufficient, preallocation weights affect the preallocation probabilities of users. The preallocation probability has a positive correlation with the preallocation weight. This parameter is QCI-specific.
NO
No
Indicates the ID of a parameter group NO related to inter-RAT handover.
NO
No
LOFD-001019 / TDLOFD-001019 LOFD-001020 / TDLOFD-001020 LOFD-001021 LOFD-001022 / TDLOFD-001022 LOFD-001023 / TDLOFD-001023 LOFD-001043 / TDLOFD-001043 LOFD-001045 / TDLOFD-001045 LOFD-001044 / TDLOFD-001044 LOFD-001046 / TDLOFD-001046 LOFD-001033 / TDLOFD-001033 LOFD-001034 / TDLOFD-001034 LOFD-001035
Indicates the ID of an RLC/PDCP parameter group.
NO
NO
No
Indicates the prioritized bit rate of the logical channel. The UE scheduler guarantees prioritized bit rates NO of logical channels in descending order of logical channel priority. For details, see 3GPP TS 36.321.
NO
No
Indicates the priority of the logical channel. The UE scheduler guarantees prioritized bit rates of logical channels in an ascending order of logical channel priorities. NO Resources are allocated in an ascending order of logical channel priorities after the prioritized bit rates of all services are guaranteed. For details, see 3GPP TS 36.321.
NO
No
Indicates whether to enable flow control NO for the QCI.
NO
No
Indicates the default Doppler shift level. This is the default parameter used when Doppler shift NO measurement is not required. This parameter is unavailable in this version.
NO
No
LOFD-00101502 / TDLOFD-00101502
Indicates the type of adaptive beamforming and MIMO (BFMIMO) for a multi-antenna eNodeB. The values are described as follows: NO_ADAPTIVE: A fixed BFMIMO transmission mode is used. That is, transition between BFMIMO transmission modes is not supported. NO TxD_BF_ADAPTIV E: The transmission mode changes adaptively between TM2 and TM7 or between TM2 and TM8, depending on the protocol release with which UEs comply. MIMO_BF_ADAPTI VE: The transmission mode changes adaptively between TM2, TM3, and TM7 or between TM2, TM3,
NO
No
LBFD-002017 / TDLBFD-002017 LOFD-001001 / TDLOFD-001001 LOFD-001003 / TDLOFD-001003 TDLOFD-009003
Indicates the fixed beamforming and MIMO (BFMIMO) transmission mode configured by a multi-antenna eNodeB for UEs. This parameter is valid only when BfMimoAdaptiveSwi tch is set to NO_ADAPTIVE. There are five values. TM2: Transmission NO mode 2 is always used for UEs. TM3: Transmission mode 3 is always used for UEs. TM7: Transmission mode 7 is always used for UEs. TM8: Transmission mode 8 is always used for UEs. TM4: Transmission mode 4 is always used for UEs.
NO
No
LBFD-002017 / TDLBFD-002017 LOFD-001001 / TDLOFD-001001 LOFD-001003 / TDLOFD-001003 TDLOFD-009003
Indicates whether to enable or disable CQI reporting period adaptation. NO This parameter is valid only for FDD cells.
NO
No
LBFD-002025 / TDLBFD-002025
Indicates the fixed CQI reporting period. A fixed CQI reporting period is used when CQI NO reporting period adaptation is disabled. This parameter is valid only for FDD cells.
NO
No
LBFD-002025 / TDLBFD-002025
Indicates the type of adaptive MIMO for a multi-antenna eNodeB. The values are described as follows: NO_ADAPTIVE: A fixed MIMO transmission mode is used. That is, transition between MIMO transmission modes is not supported. OL_ADAPTIVE: open-loop adaptive NO MIMO transmission mode. UEs report RANK and CQI values but do not report PMI values to the eNodeB. CL_ADAPTIVE: closed-loop adaptive MIMO transmission mode. UEs report RANK, CQI, and PMI values to the eNodeB. OC_ADAPTIVE: UEs switch between the open-loop and
NO
No
Indicates the fixed MIMO mode for a multi-antenna eNodeB. This parameter is valid only when MimoAdaptiveSwitc h is set to NO_ADAPTIVE. There are four values. TM2: Transmission mode 2 is permanently applied NO to UEs. TM3: Transmission mode 3 is permanently applied to UEs. TM4: Transmission mode 4 is permanently applied to UEs. TM6: Transmission mode 6 is permanently applied to UEs.
NO
No
Indicates whether to enable or disable NO SRS period adaptation.
NO
No
LBFD-002025 / TDLBFD-002025
Indicates the fixed SRS period. A fixed SRS period is used NO when SRS period adaptation is disabled.
NO
No
LBFD-002025 / TDLBFD-002025
Indicates the QoS class identifier (QCI). QCI 1 indicates voice services. QCI 2 indicates video (live streaming) services. QCI 3 indicates realtime gaming services. QCI 4 indicates YES video (buffered streaming) services. QCI 5 indicates IMS signaling. QCI 7 indicates voice, video, and interactive gaming services. QCIs 6, 8, and 9 indicate video services and TCPbased services.
YES
No
None
Indicates the length of the timer for periodic transmission of buffer status reports (BSRs). BSRs are sent periodically or as triggered by events. Periodic NO transmission of BSRs uses the timer specified by this parameter. When the timer expires, a BSR is sent. After the BSR is sent, the timer is restarted.
NO
No
None
Indicates the length of the BSR retransmission NO timer. This timer is started after a BSR is sent.
NO
No
None
Indicates the measurement gap pattern. The eNodeB defines the measurement gaps for UEs in connected mode. During the measurement gaps, a UE measures the signal quality of the cells on a specific frequency. NO There are two gap patterns: pattern 1 and pattern 2. In pattern 1, the gap width is 6 ms and the repetition period is 40 ms. In pattern 2, the gap width is 6 ms and the repetition period is 80 ms. For details, see 3GPP TS 36.331. Indicates the upperlayer filtering coefficient for RSRP measurements on EUTRAN. A large value of this parameter indicates a strong smoothing NO effect and high resistance to fast fading, but it weakens the tracing capability towards varying signals. For details, see 3GPP TS 36.331.
NO
No
LBFD-00201802 / TDLBFD-00201802 LOFD-001019 / TDLOFD-001019 LOFD-001020 / TDLOFD-001020 LOFD-001021 LOFD-001022 / TDLOFD-001022 LOFD-001023 / TDLOFD-001023
NO
No
Indicates the upperlayer filtering coefficient for RSRQ measurements on EUTRAN. A larger value of this parameter indicates a stronger NO smoothing effect and higher resistance to fast fading, but it may weaken the tracing capability towards varying signals. For details, see 3GPP TS 36.331. Indicates the L3 filtering coefficient used for the measurement quantity in interRAT measurements of GERAN. A great value of this parameter indicates NO a strong smoothing effect and a high anti-fast-fading capability, but a low signal change tracing capability. For details, see 3GPP TS 36.331.
NO
No
NO
No
Indicates whether the measurement threshold needs to be set. If this parameter is set to CFG, the SMeasure NO parameter needs to be set. If this parameter is set to NOT_CFG, the SMeasure parameter does not need to be set.
NO
No
LBFD-00201801 / TDLBFD-00201801 LBFD-00201802 / TDLBFD-00201802 LOFD-001023 / TDLOFD-001023 LOFD-001019 / TDLOFD-001019 LOFD-001020 / TDLOFD-001020 LOFD-001021 LOFD-001022 / TDLOFD-001022
Indicates the threshold below which measurements on neighboring cells are started. If the signal quality of the serving cell exceeds this threshold, the UE is not required to perform intrafrequency, interfrequency, or interRAT NO measurements, leading to reduced power consumption. The value -141 does not take effect, and is reserved for backward compatibility. If this parameter is set to 141, the value -140 is used as the threshold in implementation. Indicates whether mobility-based cell handover measurement parameters need to be set. If this parameter is set to CFG, the system supports setting of mobilitybased handover NO measurement parameters. If this parameter is set to NOT_CFG, the system does not support setting of mobility-based handover measurement parameters.
NO
No
LBFD-00201801 / TDLBFD-00201801 LBFD-00201802 / TDLBFD-00201802 LOFD-001019 / TDLOFD-001019 LOFD-001020 / TDLOFD-001020 LOFD-001021 LOFD-001022 / TDLOFD-001022
NO
No
Indicates the cycle during which evaluations of the UE medium and high mobility states in RRC_CONNECTE D mode are performed. It is one of the key parameters in deciding on a UE's mobility state. If this parameter is set to NO a small value, switchings among mobility states are frequent and the decision precision is relatively low. If this parameter is set to a large value, switchings among mobility states are not frequent and the decision precision is relatively high. Indicates the cycle during which evaluations of the UE normal mobility state in RRC_CONNECTE D mode are performed. It is one of the key parameters in deciding on a UE's mobility state. If this parameter is set to NO a small value, switchings among mobility states are frequent and the decision precision is relatively low. If this parameter is set to a large value, switchings among mobility states are not frequent and the decision precision is relatively high.
NO
No
NO
No
Indicates the handover number threshold used in the UE medium mobility state evaluation. If the number of handovers performed during a period of time specified by the NO TcrMaxConnMode parameter exceeds the value of this parameter, the UE is considered to be in medium mobility state and its handover-related parameters are adjusted. Indicates the handover number threshold used in the UE high mobility state evaluation. If the number of handovers performed during a period of time specified by the NO TcrMaxConnMode parameter exceeds the value of this parameter, the UE is considered to be in high mobility state and its handover-related parameters are adjusted.
NO
No
LOFD-001007 / TDLOFD-001007
NO
No
Indicates the scaling factor for the time-to-trigger defined for mediummobility UEs. For a UE in medium mobility, the time-to- NO trigger used in event evaluation is multiplied by this scaling factor, to facilitate triggering of the handover. Indicates the scaling factor for the time-to-trigger defined for highmobility UEs. For a UE in high mobility, the time-to-trigger NO used in event evaluation is multiplied by this scaling factor, to facilitate triggering of the handover. Indicates the filtering coefficient for RSCP measurements on UTRAN. A large value of this parameter indicates a strong smoothing NO effect and high resistance to fast fading, but it weakens the tracing capability towards varying signals. For details, see 3GPP TS 36.331.
NO
No
LOFD-001007 / TDLOFD-001007
NO
No
NO
No
Indicates the upperlayer filtering coefficient for Ec/No measurements on UTRAN. A large value of this parameter indicates a strong smoothing NO effect and high resistance to fast fading, but it weakens the tracing capability towards varying signals. For details, see 3GPP TS 36.331.
NO
No
Indicates the maximum number of cells to be included in the measurement report after an inter-RAT handover event or a NO periodic inter-RAT measurement for ANR purposes is triggered. For details, see 3GPP TS 36.331.
NO
No
Indicates the number of periodical measurement reports to be sent after an inter-RAT handover event is triggered. It is used NO to prevent the impact of measurement report loss and internal processing failure on the handover. For details, see 3GPP TS 36.331.
NO
No
LOFD-001020 / TDLOFD-001020 LOFD-001023 / TDLOFD-001023 LOFD-001021 LOFD-001019 / TDLOFD-001019 LOFD-001022 / TDLOFD-001022 LOFD-001043 / TDLOFD-001043 LOFD-001046 / TDLOFD-001046
Indicates the interval at which periodical measurement reports are sent after the event for the handover to GERAN is triggered. For details, see 3GPP TS 36.331.
NO
NO
No
Indicates the quantity to be included in the measurements for handovers to UTRAN. The RSCP values are relatively stable, while the Ec/No values may vary with the network load. The value NO UTRAN_BOTH applies only to UEs complying with R10. For UEs complying with R8 or R9, the value UTRAN_BOTH takes the same effect as the value UTRAN_RSCP. For details, see 3GPP TS 23.003.
NO
No
Indicates the interval at which periodical measurement reports are sent NO after the event for the handover to UTRAN is triggered. For details, see 3GPP TS 36.331.
NO
No
Indicates the measurement quantity required for the inter-RAT NO handover to CDMA2000 1xRTT. For details, see 3GPP TS 36.331.
NO
No
LOFD-001021
Indicates the interval at which periodical measurement reports are sent after the event for NO the handover to CDMA2000 1xRTT is triggered. For details, see 3GPP TS 36.331.
NO
No
LOFD-001021
Indicates the measurement quantity required for the inter-RAT NO handover to CDMA2000 HRPD. For details, see 3GPP TS 36.331.
NO
No
LOFD-001021
Indicates the interval at which periodic reports are sent to the eNodeB after the triggering condition of the NO event for inter-RAT handover to CDMA2000 HRPD is met. For details, see 3GPP TS 36.331.
NO
No
LOFD-001021
Indicates the quantity used to evaluate the triggering condition for the inter-RAT measurement event A1 or A2. The values are RSRP, RSRQ and BOTH. The measured RSRP values are stable, varying little with the load, and therefore there is little signal NO fluctuation. The measured RSRQ values vary with the load and are likely to reflect the signal quality of the cell in real time. By default, the reporting quantity for the inter-RAT handover event is BOTH, that is, both RSRP and RSRQ. For details, see 3GPP TS 36.331.
NO
No
Indicates the type of the inter-RAT handover event. This parameter can be set to EventB1 NO or EventB2. The default value is EventB1. For details, see 3GPP TS 36.331.
NO
No
Indicates the maximum number of cells to be included in the measurement report after an intra-RAT inter-frequency or intra-RAT intrafrequency NO measurement event for handover purposes or a periodic intra-RAT measurement for ANR purposes is triggered. For details, see 3GPP TS 36.331. Indicates the number of periodical measurement reports to be sent after an event for the intra- or interfrequency handover within the E-UTRAN NO is triggered. It is used to prevent the impact of measurement report loss and internal processing failure on the handover. For details, see 3GPP TS 36.331.
NO
No
NO
No
LBFD-00201801 / TDLBFD-00201801 LBFD-00201802 / TDLBFD-00201802 LOFD-001032 / TDLOFD-001032
Indicates the quantity used to evaluate the triggering condition for the intrafrequency handover event. The quantity can be RSRP or RSRQ. The measured RSRP values are stable, varying little NO with the load, and therefore there is little signal fluctuation. The measured RSRQ values vary with the load and are likely to reflect the signal quality of the cell in real time. For details, see 3GPP TS 36.331.
NO
No
LBFD-00201801 / TDLBFD-00201801
Indicates the quantity to be included in the measurement report for the intrafrequency handover event. The quantity can be RSRP, RSRQ, or both. The measured RSRP values are stable, varying little with the load, and therefore there is little signal fluctuation. The NO measured RSRQ values vary with the load and are likely to reflect the signal quality of the cell in real time. Even when this parameter is set to BOTH, the eNodeB triggers a handover based on the setting of the IntraFreqHoA3Trig Quan parameter. For details, see 3GPP TS 36.331. Indicates the interval between periodic measurement reports that are sent after an intrafrequency handover is triggered. The value of this NO parameter is also used as the interval between A3-related inter-frequency measurement reports. For details, see 3GPP TS 36.331.
NO
No
LBFD-00201801 / TDLBFD-00201801
NO
No
Indicates the quantity to be included in the measurement report for the interfrequency handover event. The quantity can be RSRP, RSRQ, or both. The measured RSRP values are stable, varying little with the load, and therefore there is little signal fluctuation. The NO measured RSRQ values vary with the load and are likely to reflect the signal quality of the cell in real time. After an inter-frequency handover event is triggered, the default reporting quantity is BOTH, that is, both RSRP and RSRQ. For details, see 3GPP TS 36.331.
NO
No
Indicates the interval at which periodical measurement reports are sent NO after an interfrequency handover event is triggered. For details, see 3GPP TS 36.331.
NO
No
Indicates the quantity used in the evaluation for interfrequency measurement event A1 or A2. The quantity can be RSRP, RSRQ, or both. The measured RSRP values are stable, varying little with the load, and NO therefore there is little signal fluctuation. The measured RSRQ values vary with the load and are likely to reflect the signal quality of the cell in real time. For details, see 3GPP TS 36.331. Indicates the triggering quantity for frequencypriority-based interfrequency measurement events A1 and A2. The quantity can be either RSRP or RSRQ. The measured RSRP values are stable, NO varying little with the load, and therefore there is little signal fluctuation. The measured RSRQ values vary with the load and are likely to reflect the signal quality of the cell in real time. For details, see 3GPP TS 36.331. Indicates the triggering quantity for frequencypriority- and loadNO based interfrequency handover event A4.
NO
No
LBFD-00201802 / TDLBFD-00201802
NO
No
LBFD-00201802 / TDLBFD-00201802
NO
No
LBFD-00201802 / TDLBFD-00201802
Indicates the local ID of the cell. It YES uniquely identifies a cell within a BS. Indicates the time-totrigger for event B1 that is used in CS fallback to UTRAN. When CS fallback to UTRAN is applicable, this parameter is set for UEs and used in the evaluation of whether to trigger event B1. When detecting that the signal quality in at least one UTRAN cell meets the entering condition, NO the UE does not send a measurement report to the eNodeB immediately. Instead, the UE sends a report only when the signal quality continuously meets the entering condition during the time-to-trigger. This parameter helps decrease the number of occasionally triggered event
YES
No
LBFD-001001 / TDLBFD-001001
NO
No
LOFD-001033 / TDLOFD-001033
Indicates the time-totrigger for event B1 that is used in CS fallback to GERAN. When CS fallback to GERAN is applicable, this parameter is set for UEs and used in the evaluation of whether to trigger event B1. When detecting that the signal quality in at least one GERAN cell meets the entering condition, NO the UE does not send a measurement report to the eNodeB immediately. Instead, the UE sends a report only when the signal quality continuously meets the entering condition during the time-to-trigger. This parameter helps decrease the number of occasionally triggered event
NO
No
LOFD-001034 / TDLOFD-001034
Indicates the time-totrigger for event B1, which is used in CS fallback to CDMA2000. When CS fallback to CDMA2000 is applicable, this parameter is set for UEs and used in the evaluation of whether to trigger event B1. When detecting that the signal quality in at least one CDMA2000 cell NO meets the entering condition, the UE does not send a measurement report to the eNodeB immediately. Instead, the UE sends a report only when the signal quality continuously meets the entering condition during the time-to-trigger. This parameter helps reduce the number of occasionally triggered event
NO
No
LOFD-001035
Indicates the RSCP threshold for event B1, which is used in CS fallback to UTRAN. When CS fallback to UTRAN is applicable, this parameter is set for UEs and used in the evaluation about whether to trigger event B1. This parameter indicates the RSCP requirement for the UTRAN cells to be NO included in the measurement report. A UE sends a measurement report related to event B1 to the eNodeB when the RSCP in at least one UTRAN cell exceeds this threshold and other triggering conditions are met. For details, see 3GPP TS 36.331.
NO
No
LOFD-001033 / TDLOFD-001033
Indicates the Ec/No threshold for event B1, which is used in CS fallback to UTRAN. When CS fallback to UTRAN is required, this parameter is set for UEs and used in the evaluation about whether to trigger event B1. This parameter indicates the Ec/No requirement for the UTRAN cells to be included in the NO measurement report. A UE sends a measurement report related to event B1 to the eNodeB when the Ec/No in at least one UTRAN cell exceeds this threshold and other triggering conditions are met. For a cell with large signal fading variance, set this parameter to a large value to prevent Indicates the RSSI threshold for event B1 that is used in CS fallback to GERAN. A UE sends a measurement report related to event B1 to the eNodeB NO when the RSSI in at least one GERAN cell exceeds this threshold and other triggering conditions are met. For details, see 3GPP TS 36.331.
NO
No
LOFD-001033 / TDLOFD-001033
NO
No
LOFD-001034 / TDLOFD-001034
Indicates the pilot strength threshold related to event B1, which is used in CS fallback to CDMA2000. A UE sends a measurement report related to event B1 to the eNodeB NO when the pilot strength in at least one CDMA2000 cell exceeds this threshold and other triggering conditions are met. For details, see 3GPP TS 36.331. Indicates the local ID of the cell. It YES uniquely identifies a cell within a BS.
NO
No
LOFD-001035
YES
No
LBFD-001001 / TDLBFD-001001
Indicates whether to configure the NO access barring information.
NO
No
Indicates the emergency call barring status of access class 10, indicating whether UEs of access class 10 can initiate emergency calls. If this parameter is set to BOOLEAN_TRUE, UEs of access classes 0 to 9 or those without IMSIs cannot initiate emergency calls. If this parameter is set NO to BOOLEAN_FALSE, UEs of access classes 0 to 9 and those without IMSIs can initiate emergency calls. A UE in access classes 11 to 15 cannot initiate emergency calls only when its access class and access class 10 are both barred. If its access class or access class 10 is
NO
No
LBFD-002028 / TDLBFD-002028
Indicates whether to configure the access barring NO information for mobile-originated calls.
NO
No
Indicates the access probability factor for mobileoriginated calls. A mobile-originated call is granted access if the random number generated by the UE is smaller than this access NO probability factor; otherwise, the access request is rejected. If this parameter is set to P00, all mobileoriginated calls initiated by UEs of access class 11 to access class 15 are granted access.
NO
No
Indicates the average access barring duration for NO mobile-originated calls.
NO
No
Indicates the mobileoriginated call barring status of access class 11, indicating whether UEs of access class 11 can initiate mobile-originated calls. If this parameter is set to NO BOOLEAN_TRUE, UEs of access class 11 cannot initiate mobile-originated calls. If this parameter is set to BOOLEAN_FALSE, UEs of access class 11 can initiate mobile-originated calls.
NO
No
NO
No
NO
No
NO
No
NO
No
Indicates whether to configure the access barring NO information for signaling.
NO
No
Indicates the access probability factor for signaling. Signaling from a UE is granted access if the random number generated by the UE is smaller than this access probability factor; NO otherwise, the access request is rejected. If this parameter is set to P00, signaling from UEs of access class 11 to access class 15 is granted access.
NO
No
Indicates the average access NO barring duration for signaling.
NO
No
Indicates the signaling barring status of access class 11, indicating whether UEs of access class 11 can initiate signaling access. If this parameter is set to NO BOOLEAN_TRUE, UEs of access class 11 cannot initiate signaling access. If this parameter is set to BOOLEAN_FALSE, UEs of access class 11 can initiate signaling access. Indicates the signaling barring status of access class 12, indicating whether UEs of access class 12 can initiate signaling access. If this parameter is set to NO BOOLEAN_TRUE, UEs of access class 12 cannot initiate signaling access. If this parameter is set to BOOLEAN_FALSE, UEs of access class 12 can initiate signaling access.
NO
No
NO
No
Indicates the signaling barring status of access class 13, indicating whether UEs of access class 13 can initiate signaling access. If this parameter is set to NO BOOLEAN_TRUE, UEs of access class 13 cannot initiate signaling access. If this parameter is set to BOOLEAN_FALSE, UEs of access class 13 can initiate signaling access. Indicates the signaling barring status of access class 14, indicating whether UEs of access class 14 can initiate signaling access. If this parameter is set to NO BOOLEAN_TRUE, UEs of access class 14 cannot initiate signaling access. If this parameter is set to BOOLEAN_FALSE, UEs of access class 14 can initiate signaling access.
NO
No
NO
No
Indicates the signaling barring status of access class 15, indicating whether UEs of access class 15 can initiate signaling access. If this parameter is set to NO BOOLEAN_TRUE, UEs of access class 15 cannot initiate signaling access. If this parameter is set to BOOLEAN_FALSE, UEs of access class 15 can initiate signaling access. Indicates the local ID of the cell. It YES uniquely identifies a cell within a BS. Indicates whether the cell is barred. If the cell is barred, the UE cannot camp on the serving NO cell. During cell reselection, the serving cell is not selected as a candidate cell.
NO
No
YES
No
LBFD-001001 / TDLBFD-001001
NO
No
Indicates whether the cell is reserved for future extension. If the cell is reserved, whether a UE can access the cell depends on the access class of the UE and its serving PLMN. Details are described as follows: (1) A UE of access class 11 or 15 treats the cell as a candidate if the UE is served by its home PLMN NO (HPLMN) or equivalent home PLMN (EHPLMN); (2) A UE of access class 11 or 15 treats the cell as a barred cell if it is not served by its HPLMN or EHPLMN; (3) A UE of an access class within the two ranges of 0-9 and 12-14 treats the cell as a barred cell. In this version, the parameter still Indicates whether the cell can initiate the intra-frequency cell reselection when the cell is barred. NOT_ALLOWED means that the UE NO cannot initiate the intra-frequency cell reselection, and ALLOWED means that the UE can initiate the intrafrequency cell reselection.
NO
No
NO
No
Indicates whether the PLMN broadcast sequence is fixed or periodically rotates, corresponding to the normal mode or round Robin mode. If certain cells in the live network are in RAN sharing with common carrier mode and at least one cell uses the round Robin mode, ANR must be NO disabled for all cells in the network. If ANR is enabled for a cell that is not in RAN sharing with common carrier mode, the cell may experience failures in handing over UEs to an ANRestablished neighboring cell that is in RAN sharing with common carrier mode.
NO
No
LBFD-001001 LBFD-002009 LBFD-00201803
Indicates the changing period of cell PLMN.
NO
NO
No
YES
No
LBFD-001001 / TDLBFD-001001
Indicates the tracking area identity of the cell, which uniquely identifies an operator within a cell.
YES
YES
No
Indicates whether the cell is reserved for operator use. If this parameter is set to CELL_RESERVED _FOR_OP, the cell is reserved for operator use. UEs of AC11 or AC15 in their HPLMN or EHPLMN can consider this cell as a candidate cell for cell selection or reselection. UEs of AC11 or AC15 NO outside their HPLMN/EHPLMN and UEs of AC09/AC12-14 consider this cell as a barred cell during cell selection or reselection. If this parameter is set to CELL_NOT_RESE RVED_FOR_OP, the cell is not reserved for operator use. All UEs can consider this cell as a Indicates the percentage of RBs occupied by the operator on the PUSCH when RAN sharing is enabled at the eNodeB and the cell-level switch of RAN sharing is turned on. When the data volume is NO sufficiently large, the percentage of RBs occupied by each operator will reach the preset value. Modifications on this parameter affect operators' percentages of RBs.
NO
No
NO
No
Indicates the percentage of RBs occupied by the operator on the PDSCH when RAN sharing is enabled at the eNodeB and the cell-level switch of RAN sharing is turned on. When the data volume is NO sufficiently large, the percentage of RBs occupied by each operator will reach the preset value. Modifications on this parameter affect operators' percentages of RBs. Indicates the operator index that is broadcast in the cell system information.
NO
No
NO
NO
Yes
None
YES
No
LBFD-001001 / TDLBFD-001001
Indicates the hysteresis for cell reselection when RSRP values are used in the evaluation. This parameter must be set based on the slow fading characteristic of the area covered by the cell. The greater the NO slow fading variance is, the larger the value of this parameter must be set to. A larger value of the hysteresis results in a larger boundary of the serving cell and a higher probability of cell reselection to neighboring cells.
NO
No
Indicates whether to set the parameters related to speedNO dependent cell reselection.
NO
No
Indicates the duration in which the mobility status of the UE is evaluated. This parameter is one of the key parameters in deciding on the UE mobility. A smaller value of this NO parameter may lead to more frequent switching among mobility status and lower decision accuracy. A larger value of this parameter leads to the opposite effect.
NO
No
Indicates the extra duration required in the evaluation before the UE can enter the normalmobility state. This parameter can prevent UEs from frequently switching from the high- or medium-mobility state to the normalmobility state, and is one of the key parameters in NO deciding on the UE mobility. A larger value of this parameter leads to a lower probability of transition from the high- or mediummobility state to the normal-mobility state but higher decision accuracy. A smaller value of this parameter leads to the opposite effect.
NO
No
Indicates the threshold for a UE to enter the medium mobility state. Based on the number of cell reselections, this parameter is one of the key parameters in determining the mobility state of the UE. During the UE mobility evaluation, if the number of reselections is above or equal to the value of this NO parameter and below than the value of NCellChangeHigh, the UE enters the medium mobility state. A smaller value of this parameter results in a higher probability of a UE entering the medium mobility state. A larger value of this parameter leads to a lower probability.
NO
No
Indicates the threshold for a UE to enter the high mobility state. Based on the number of cell reselections, this parameter is one of the key parameters in determining the mobility state of the UE. During the UE mobility evaluation, if the number of cell reselections is NO above or equal to the value of this parameter, the UE enters the high mobility state. A smaller value of this parameter results in a higher probability of a UE entering the high mobility state. A larger value of this parameter leads to a lower probability.
NO
No
Indicates the additional hysteresis applied to Qhyst for mediummobility UEs. For example, the value DB_6_Q_HYST_SF _MEDIUM indicates NO -6 dB additional hysteresis applied to Qhyst for mediummobility UEs, and DB_4_Q_HYST_SF _MEDIUM indicates -4 dB additional hysteresis.
NO
No
Indicates the additional hysteresis applied to Qhyst for highmobility UEs. For example, the value DB_6_Q_HYST_SF _HIGH indicates -6 NO dB additional hysteresis applied to Qhyst for highmobility UEs, and DB_4_Q_HYST_SF _HIGH indicates -4 dB additional hysteresis.
NO
No
Indicates whether to set the measurement triggering threshold NO for reselection to inter-frequency or inter-RAT cells.
NO
No
Indicates the measurement triggering threshold for reselection to inter-frequency or inter-RAT cells. The step is 2 dB. If the cell reselection priority of a frequency or RAT is higher than that of the serving frequency, the UEs always start interfrequency or interRAT measurements. NO If the cell reselection priority of a frequency is lower than or equal to that of the serving frequency or if the cell reselection priority of an RAT is lower than that of the serving frequency, the UEs start interfrequency or interRAT measurements only when the value of Cell selection RX level value (dB) is
NO
No
Indicates the threshold used in the evaluation of reselection to a cell on a lower priority EUTRAN frequency or on an inter-RAT frequency. Cell reselection to a cell on a lower priority EUTRAN frequency or on an inter-RAT NO frequency is performed if no cell on the serving frequency or on a higher priority EUTRAN frequency fulfills criteria 1 for inter-frequency and inter-RAT reselections. For details, see 3GPP TS 36.304. Indicates the cell reselection priority of the serving frequency. 0 indicates the lowest priority. The value of this parameter must be determined together with the priorities of other NO frequencies during the network planning. Frequencies used for different RATs must be assigned different cell reselection priorities.
NO
No
NO
No
Indicates the minimum required receive level used NO in intra-frequency EUTRA cell reselection.
NO
No
Indicates whether to configure the maximum TX power of the UE in the intra-frequency neighboring cell. When the parameter is set to NO CFG, the maximum TX power of the UE is configured. When the parameter is set to NOT_CFG, the maximum TX power of the UE is not configured.
NO
No
Indicates the maximum TX power of the UE in the cell. If this parameter is NO not included in the SIB3, the UE uses the maximum TX power.
NO
No
Indicates whether to set the measurement triggering threshold NO for reselection to intra-frequency cells.
NO
No
Indicates the measurement triggering threshold for reselection to intra-frequency cells. The step is 2 dB. The UEs start intraNO frequency measurements only if the value of Cell selection RX level value (dB) is lower than or equal to the value of this parameter.
NO
No
Indicates whether to set the NO measurement bandwidth.
NO
No
Indicates the measurement bandwidth on the serving frequency on which the UE camps. It is used in intra-frequency measurements for cell reselection and NO those by UEs in RRC_CONNECTE D mode. This parameter is optional; if it is not set, the downlink bandwidth of the serving cell is used by default. Indicates the cell reselection duration of the E-UTRAN. When the signal quality of the new cell is better than the serving cell all the time and the UE stays in the current serving cell for more than 1s, the UE is initiating cell reselection request to the new cell. The smaller the parameter is, the NO easier the cell reselection from the serving cell is triggered, and the more possibly that the pingpong reselection occurs. The bigger the parameter is, the more difficult the cell reselection from the serving cell is triggered, and the less possibly that the pingpong reselection occurs.
NO
No
NO
No
Indicates whether to set the scaling parameters for NO speed-dependent cell reselection within E-UTRAN.
NO
No
Indicates the scaling factor applied to TReselEutra for medium-mobility UEs. The actual duration of cell NO reselection for medium-mobility UEs to E-UTRAN is equal to the product of TReselEutra and TReselEutranSfMe dium.
NO
No
Indicates the scaling factor applied to TReselEutran for high-mobility UEs. The actual duration of cell reselection of NO high-mobility UEs to E-UTRAN is equal to TReselEutran multiplied by TReselEutranSfHig h.
NO
No
Indicates the information related to MBSFN and TDD UL/DL configurations of intra-frequency neighboring cells of the serving cell. The value 00 indicates that some neighboring cells have the same MBSFN subframe configuration as the serving cell. The value 01 indicates that none NO of the neighboring cells is configured with MBSFN subframes. The value 10 indicates that the MBSFN subframe configurations of all neighboring cells are the same as or subsets of that of the serving cell. The value 11 indicates that some neighboring cells have different ULDL configurations Indicates whether the intra-frequency neighboring cells are configured with the 2TX antenna. Set this parameter to TRUE when all the intra-frequency neighboring cells NO are configured with the 2TX antenna. Set this parameter to FALSE when one of the intrafrequency neighboring cells is not configured with the 2TX antenna.
NO
No
NO
No
Indicates the RSRQ threshold for starting intrafrequency measurements. It determines the probability of NO triggering cell reselection to an intra-frequency neighboring cell. For details, see 3GPP TS 36.304. Indicates the RSRQ threshold for starting interfrequency or interRAT measurements. It determines the probability of NO triggering cell reselection to an inter-frequency or inter-RAT neighboring cell. For details, see 3GPP TS 36.304.
NO
No
NO
No
Indicates whether to set the RSRQ threshold for NO reselection to cells on lower-priority frequencies.
NO
No
Indicates the RSRQ threshold for cell reselection to cells on lower-priority frequencies. It determines the probability of triggering cell NO reselection to interfrequency or interRAT neighboring cells on lowerpriority frequencies. For details, see 3GPP TS 36.304. Indicates whether to set the RX level of an intra-frequency neighboring cell, NO which is required for it to become a candidate for cell reselection.
NO
No
NO
No
Indicates the minimum RX level of an intrafrequency neighboring cell, which is required for it to become a candidate for cell reselection. It NO determines the probability of triggering cell reselection to an intra-frequency neighboring cell. For details, see 3GPP TS 36.304.
NO
No
YES
No
LBFD-001001 / TDLBFD-001001
Indicates whether to configure the CDMA2000 system NO time information. For details, see 3GPP TS 36.331.
NO
No
Indicates the network synchronization status. If this parameter is set to BOOLEAN_TRUE, the E-UTRAN and the CDMA2000 RAN are synchronized NO without drifts. If this parameter is set to BOOLEAN_FALSE, the E-UTRAN and the CDMA2000 RAN are not synchronized. For details, see 3GPP TS 36.331.
NO
No
LBFD-001001 LBFD-002009 LBFD-00201803
Indicates whether to set the search window size. If this parameter is set to CFG, the cell is configured with the search window. If NO the parameter is set to NOT_CFG, the cell is not configured with the search window. For details, see 3GPP TS 36.331.
NO
No
Indicates the size of the CDMA2000 search window, and can be used to assist in searching NO for the neighboring pilots. For details, see 3GPP TS 36.331.
NO
No
Indicates whether to set the HRPD parameters. If this parameter is set to CFG, the cell is configured with the NO HRPD parameters. If the parameter is set to NOT_CFG, the cell is not configured with the HRPD parameters.
NO
No
Indicates whether to set the parameters related to cell reselection to CDMA2000 HRPD. If the parameter is set to CFG, the cell is configured with the parameters related to cell NO reselection to CDMA2000 HRPD. If the parameter is set to NOT_CFG, the cell is not configured with the parameters related to cell reselection to CDMA2000 HRPD.
NO
No
Indicates whether pre-registration with CDMA2000 HRPD is allowed when the UE does not have a valid preregistration. If the parameter is set to BOOLEAN_TRUE, the UE is allowed to NO perform the preregistration. If the parameter is set to BOOLEAN_FALSE, the UE is not allowed to perform the pre-registration. For details, see 3GPP TS 36.331.
NO
No
Indicates the ID of the pre-registration CDMA2000 HRPD zone. This parameter is used to control the reregistration of the NO UE and is valid only when preregistration is allowed. For details, see 3GPP TS 36.331.
NO
No
LBFD-001001 LBFD-002009 LBFD-00201803
Indicates whether secondary preregistration zone ID 0 needs to be set. The value CFG indicates that secondary preregistration zone ID NO 0 exists, and the value NOT_CFG indicates that secondary preregistration zone ID 0 does not exist. For details, see 3GPP TS 36.331.
NO
No
Indicates secondary pre-registration zone ID 0. It is used to control the reNO registration of the UE. For details, see 3GPP TS 36.331.
NO
No
Indicates whether secondary preregistration zone ID 1 needs to be set. The value CFG indicates that secondary preregistration zone ID NO 1 exists, and the value NOT_CFG indicates that secondary preregistration zone ID 1 does not exist. For details, see 3GPP TS 36.331.
NO
No
Indicates secondary pre-registration zone ID 1. It is used to control the reNO registration of the UE. For details, see 3GPP TS 36.331.
NO
No
Indicates the duration used in cell reselection to CDMA2000 HRPD. The UE initiates reselection to a CDMA2000 HRPD cell when all the following conditions are met: (1) The signal quality in the serving cell is continuously lower than its low-priority reselection threshold during the time; (2) The signal NO quality in the CDMA2000 HRPD cell is continuously higher than its lowpriority reselection threshold during the time; and (3) The UE camps on the current serving cell for more than 1s. A smaller value of this parameter indicates a higher probability of initiating cell reselection but a higher probability of ping-pong
NO
No
Indicates whether to set the speeddependent scaling parameters related to cell reselection to CDMA2000 HRPD. If this parameter is set to CFG, the system supports the speed-dependent NO scaling parameters. If this parameter is set to NOT_CFG, the system does not support the speeddependent scaling parameters. For details, see 3GPP TS 36.331.
NO
No
Indicates the scaling factor applied to TReselCdmaHrpd for high-mobility UEs. The actual duration of cell reselection of highmobility UEs to CDMA2000 HRPD is equal to TReselCdmaHrpd multiplied by NO TReselCdmaHrpdSf High. The value T_RESEL_SF_0DO T25 means a scaling factor of 0.25, T_RESEL_SF_0DO T5 means 0.5, and so on. For details, see 3GPP TS 36.331. Indicates the scaling factor applied to TReselCdmaHrpd for medium-mobility UEs. The actual duration of cell reselection of medium-mobility UEs to CDMA2000 HRPD is equal to TReselCdmaHrpd multiplied by NO TReselCdmaHrpdSf Medium. The value T_RESEL_SF_0DO T25 means a scaling factor of 0.25, T_RESEL_SF_0DO T5 means 0.5, and so on. For details, see 3GPP TS 36.331.
NO
No
NO
No
Indicates whether the parameters applicable only for interworking with CDMA2000 1xRTT need to be set. If this parameter is set to CFG, the cell needs to be NO configured with the 1xRTT parameters. If this parameter is set to NOT_CFG, the cell does not need to be configured with the 1xRTT parameters.
NO
No
Indicates whether registration parameters need to be set for CS fallback to CDMA2000 1xRTT. If this parameter is set to CFG, the cell needs to be configured with the registration parameters for CS NO fallback to CDMA2000 1xRTT. If this parameter is set to NOT_CFG, the cell does not need to be configured with the registration parameters for CS fallback to CDMA2000 1xRTT.
NO
No
LBFD-001001 / TDLBFD-001001 LBFD-002009 / TDLBFD-002009 LBFD-00201803 / TDLBFD-00201803 LOFD-001035
Indicates the CDMA2000 1xRTT system ID. For NO details, see 3GPP TS 36.331.
NO
No
Indicates the CDMA2000 1xRTT network ID. For NO details, see 3GPP TS 36.331.
NO
No
Indicates the 1xRTTspecific multiple system ID storage NO is allowed. For details, see 3GPP TS 36.331.
NO
No
Indicates the 1xRTTspecific multiple network ID storage NO is allowed. For details, see 3GPP TS 36.331.
NO
No
Indicates the 1xRTTspecific home registration is NO allowed. For details, see 3GPP TS 36.331.
NO
No
Indicates the 1xRTTspecific SID roamer registration is NO allowed. For details, see 3GPP TS 36.331.
NO
No
Indicates the 1xRTTspecific NID roamer registration is NO allowed. For details, see 3GPP TS 36.331.
NO
No
Indicates the 1xRTTspecific parameterchange registration NO is allowed. For details, see 3GPP TS 36.331.
NO
No
Indicates the 1xRTTspecific power-up registration is NO allowed. For details, see 3GPP TS 36.331.
NO
No
Indicates the 1xRTTspecific registration period. For details, NO see 3GPP TS 36.331.
NO
No
Indicates the 1xRTTspecific registration zone. For details, NO see 3GPP TS 36.331.
NO
No
Indicates the 1xRTTspecific number of registration zones to NO be retained. For details, see 3GPP TS 36.331.
NO
No
Indicates the length of the 1xRTTspecific zone timer. NO For details, see 3GPP TS 36.331.
NO
No
Indicates whether the CDMA2000 1xRTT-specific long code state needs to be set. If this parameter is set to CFG, the cell needs to be configured with the long code state. If this parameter is set to NOT_CFG, the cell does not need to be configured with the NO long code state. In this version, the setting of this parameter is still synchronized between the M2000 and the eNodeB, but it is no longer used internally. Avoid using this parameter as it will be removed from later versions.
NO
No
Indicates the CDMA2000 1xRTTspecific long code state. For details, see 3GPP TS 36.331. In this version, the setting of this parameter is still synchronized NO between the M2000 and the eNodeB, but it is no longer used internally. Avoid using this parameter as it will be removed from later versions.
NO
No
Indicates whether the parameters applicable only for cell reselection to CDMA2000 1xRTT need to be set. If this parameter is set to CFG, the cell needs to be configured with the parameters related NO to cell reselection to CDMA2000 1xRTT. If this parameter is set to NOT_CFG, the cell does not need to be configured with the parameters related to cell reselection to CDMA2000 1xRTT.
NO
No
Indicates the duration used in cell reselection to NO CDMA2000 1xRTT. For details, see 3GPP TS 36.331.
NO
No
Indicates whether speed-dependent scaling parameters need to be set for cell reselection to CDMA2000 1xRTT. When the parameter is set to CFG, the system NO supports the speeddependent scaling parameters. When the parameter is set to NOT_CFG, the system does not support the speeddependent scaling parameters.
NO
No
Indicates the scaling factor applicable to cell reselection of medium-mobility NO UEs to CDMA2000 1xRTT. For details, see 3GPP TS 36.331.
NO
No
Indicates the scaling factor applicable to cell reselection of highNO mobility UEs to CDMA2000 1xRTT. For details, see 3GPP TS 36.331.
NO
No
Indicates whether to configure CDMA2000 1xRTT power-down NO registration. For details, see 3GPP TS 36.331.
NO
No
Indicates whether to configure access NO class barring for CDMA2000 1xRTT.
NO
No
Indicates the persistence value for access overload NO classes 0 to 9. For details, see 3GPP TS 36.331.
NO
No
Indicates the persistence value for access overload NO class 10. For details, see 3GPP TS 36.331.
NO
No
NO
No
NO
No
NO
No
NO
No
NO
No
Indicates the adjustment to the access class barring factor for message transmissions. For details, see 3GPP TS 36.331.
NO
NO
No
Indicates the adjustment to the access class barring factor for autonomous registrations. For details, see 3GPP TS 36.331.
NO
NO
No
Indicates the persistence value for emergency calls and emergency messages for NO access overload classes 0 to 9. For details, see 3GPP TS 36.331.
NO
No
YES
No
LBFD-001001 / TDLBFD-001001
Indicates the cell reselection duration of GERAN cell reselection. When the signal quality of the serving cell is lower than the low priority reselection threshold all the time and the signal of the new cell is higher than the low priority reselection threshold all the time, and the UE stays in the current serving cell for more NO than 1s, then the UE is initiating cell reselection request to the new cell. The lower the parameter is, the easier it is for the UE to initiate cell reselection. However, the PingPong reselection probability is increased. The higher the parameter is, the harder it is for the UE to initiate cell reselection. The Indicates whether to set the speeddependent scaling parameters related to cell reselection to GERAN. If this parameter is set to CFG, the system supports the NO speed-dependent scaling parameters. If this parameter is set to NOT_CFG, the system does not support the speeddependent scaling parameters.
NO
No
NO
No
Indicates the scaling factor applied to TReselGeran for medium-mobility UEs. The actual duration of cell reselection of medium-mobility UEs to GERAN is equal to TReselGeran NO multiplied by TReselGeranSfMed ium. The value T_RESEL_SF_0DO T25 means a scaling factor of 0.25, T_RESEL_SF_0DO T5 means 0.5, and so on. Indicates the scaling factor applied to TReselGeran for high-mobility UEs. The actual duration of cell reselection of high-mobility UEs to GERAN is equal to TReselGeran NO multiplied by TReselGeranSfHigh . The value T_RESEL_SF_0DO T25 means a scaling factor of 0.25, T_RESEL_SF_0DO T5 means 0.5, and so on.
NO
No
NO
No
YES
No
LBFD-001001 / TDLBFD-001001
Indicates the cell reselection duration of UTRAN cell reselection. When the signal quality of the serving cell is lower than the low priority reselection threshold all the time and the signal of the new cell is higher than the low priority reselection threshold all the time, and the UE stays in the current serving cell for more NO than 1s, then the UE is initiating cell reselection request to the new cell. The lower the parameter is, the easier it is for the UE to initiate cell reselection. However, the PingPong reselection probability is increased. The higher the parameter is, the harder it is for the UE to initiate cell reselection. The
NO
No
Indicates whether to set the speeddependent scaling parameters related to cell reselection to UTRAN. If this parameter is set to CFG, the system supports the NO speed-dependent scaling parameters. If this parameter is set to NOT_CFG, the system does not support the speeddependent scaling parameters. Indicates the scaling factor applied to TReselUtran for medium-mobility UEs. The actual duration of cell reselection of medium-mobility UEs to UTRAN is equal to TReselUtran NO multiplied by TReselUtranSfMedi um. The value T_RESEL_SF_0DO T25 means a scaling factor of 0.25, T_RESEL_SF_0DO T5 means 0.5, and so on.
NO
No
NO
No
Indicates the scaling factor applied to TReselUtran for high-mobility UEs. The actual duration of cell reselection of high-mobility UEs to UTRAN is equal to TReselUtran NO multiplied by TReselUtranSfHigh. The value T_RESEL_SF_0DO T25 means a scaling factor of 0.25, T_RESEL_SF_0DO T5 means 0.5, and so on. Indicates the local ID of the cell. It YES uniquely identifies a cell within a BS.
NO
No
LBFD-001001 LBFD-002009 LBFD-00201803 LBFD-002018
YES
No
LBFD-001001 / TDLBFD-001001
Indicates the minimum required RX level for the cell to become a candidate for cell selection. This NO value is included in criteria S and used in the evaluation of cell selection. For details, see 3GPP TS 36.304.
NO
No
Indicates the offset to the minimum required RX level. This value is included in criteria S and used in the evaluation of cell selection. This parameter is valid only when the cell selection is NO triggered by periodic searches for higher-priority PLMNs and the UE is served by a Visited Public Land Mobile Network (VPLMN). For details, see 3GPP TS 36.304.
NO
No
Indicates the minimum RX level of the cell. It is included in criteria S and used in the NO evaluation of cell selection. For details, see 3GPP TS 36.304.
NO
No
Indicates whether to set the offset to the minimum required RX level for the cell. If this parameter is set to CFG, the NO offset is required. If this parameter is set to NOT_CFG, the offset does not need to be set. Indicates the offset to the minimum required RX level for the cell. It is included in criteria S and used in the evaluation of cell selection. This parameter is required only when the cell selection is NO triggered by periodic searches for higher-priority PLMNs and the UE is served by a Visited Public Land Mobile Network (VPLMN). For details, see 3GPP TS 36.304. Indicates the local ID of the cell. It YES uniquely identifies a cell within a BS.
NO
No
NO
No
YES
No
LBFD-001001 / TDLBFD-001001
Indicates whether the mapping from SIBs to SI messages is enabled.
NO
NO
No
Indicates the transmission period for system information block NO type 2 (SIB2). For details, see 3GPP TS 36.331.
NO
No
NO
No
NO
No
NO
No
NO
No
NO
No
NO
No
NO
No
NO
No
Indicates the duration of the primary notification (PN) broadcast for NO the Earthquake and Tsunami Warning System (ETWS). Indicates the policy of processing repeated secondary notification (SN) NO broadcast for the Earthquake and Tsunami Warning System (ETWS).
NO
No
NO
No
Indicates the policy of processing repeated primary notification (PN) NO broadcast for the Earthquake and Tsunami Warning System (ETWS). Indicates the local ID of the cell. It YES uniquely identifies a cell within a BS.
NO
No
YES
No
LBFD-001001 / TDLBFD-001001
Indicates the compensation factor for path loss. It is used in UL power NO control. For details, see 3GPP TS 36.213.
NO
No
Indicates the target UE transmit power for the PUCCH expected by the eNodeB on condition that NO normal demodulation can be performed. For details, see 3GPP TS 36.213.
NO
No
Indicates the nominal P0 value of the PUSCH. It is used in UL power NO control. For details, see 3GPP TS 36.213.
NO
No
Indicates the Delta value corresponding to PUCCH format 1. NO For details, see 3GPP TS 36.213.
NO
No
Indicates the Delta value corresponding to PUCCH format NO 1b. For details, see 3GPP TS 36.213.
NO
No
Indicates the Delta value corresponding to PUCCH format 2. NO For details, see 3GPP TS 36.213.
NO
No
Indicates the Delta value corresponding to PUCCH format NO 2a. For details, see 3GPP TS 36.213.
NO
No
Indicates the Delta value corresponding to PUCCH format NO 2b. For details, see 3GPP TS 36.213.
NO
No
Indicates the power offset (delta value) of message 3 relative to the preamble. This NO power offset has a step size of 2. For details, see 3GPP TS 36.213.
NO
No
Indicates the local identity of the cell. It uniquely identifies a YES cell within an eNodeB.
YES
No
LBFD-001001 / TDLBFD-001001
Indicates the length of the uplink time alignment timer for UEs in the cell. A NO UE is considered not time-aligned in the uplink if the timer expires.
NO
No
YES
No
LBFD-001001 / TDLBFD-001001
Indicates the timer value of Timer 300. For details, see 3GPP TS 36.331. This timer is started when the UE sends RRCConnectionRe quest. Before the timer expires, it is NO stopped if the UE receives RRCConnectionSet up or RRCConnectionRej ect. After the timer expires, the UE directly enters the RRC_IDLE state. Indicates the length of timer 301. For details, see 3GPP TS 36.331. This timer is started when the UE sends an RRC Connection Reestablishment Request message. The timer is stopped if, before it expires, the UE receives an RRC Connection Reestablishment or NO RRC Connection Reestablishment Reject message. The timer is also stopped if the selected cell becomes an unsuitable cell. For the definition of a suitable cell, see 3GPP TS 36.331. After the timer expires, the UE enters the RRC_IDLE mode.
NO
No
NO
No
Indicates the length of timer 310. For details, see 3GPP TS 36.331. This timer is started when the UE detects any fault at the physical layer. The timer is stopped if the UE detects one of the following before the timer expires: (1) The physical-layer fault is rectified; (2) A handover is triggered; (3) The NO UE initiates an RRC connection reestablishment procedure. After the timer expires, the UE enters the RRC_IDLE mode if the security mode is not activated. If the security mode is activated, the UE initiates an RRC connection reestablishment procedure. Indicates the length of timer 311. For details, see 3GPP TS 36.331. This timer is started when the UE starts the RRC connection reestablishment procedure. The timer is NO stopped if, before the timer expires, the UE selects an EUTRAN or interRAT cell to camp on. After the timer expires, the UE enters the RRC_IDLE mode.
NO
No
NO
No
Indicates the maximum number of successive "in sync" indications received from L1.
NO
NO
No
Indicates the maximum number of successive "out NO of sync" indications received from L1.
NO
No
YES
No
None
Indicates the name NO of the cell.
YES
No
None
Indicates the ID of the sector to which the cell belongs.
NO
YES
No
None
Indicates whether the cell is a closed subscriber group (CSG) cell. A CSG cell has restrictions on UE access. It broadcasts a specific CSG ID in the SIB and only those UEs of the group can access NO the CSG cell. BOOLEAN_FALSE indicates that the cell is not a CSG cell, and BOOLEAN_TRUE indicates that the cell is a CSG cell. Currently, Huawei eNodeBs do not support CSG cells. Indicates the UL cyclic prefix length of a cell. A cyclic prefix can be a common or extended cyclic prefix. An extended cyclic prefix is generally used in a complex environment with a strong multi-path effect and long NO delay. In a cell, the UL cyclic prefix length can be different from the DL one. In addition, the UL or DL cyclic prefix length of a cell must be the same as that of the cell using the same LBBP. For details, see 3GPP TS 36.211.
NO
No
LBFD-002009 / TDLBFD-002009
NO
No
Indicates the length of the DL cyclic prefix of a cell. A DL cyclic prefix can be a common or extended cyclic prefix. An extended cyclic prefix is generally used in a complex environment with a strong multi-path effect and long NO delay. In a cell, the UL cyclic prefix length can be different from the DL one. In addition, the UL or DL cyclic prefix length of a cell must be the same as that of the cell using the same LBBP. For details, see 3GPP TS 36.211. Indicates the frequency band in which the cell operates. For details about this parameter, see 3GPP TS 36.104.
NO
No
LBFD-001004 / TDLBFD-001004 LBFD-00100401 / TDLBFD-00100401 LOFD-001031
NO
YES
No
Indicates whether to configure the UL EARFCN of the cell. For an FDD cell, if no UL EARFCN is configured, the UL EARFCN equals the NO sum of the DL EARFCN and 18000 by default. For a TDD cell, the UL EARFCN equals the DL EARFCN.
NO
No
LBFD-002009 / TDLBFD-002009
Indicates the UL EARFCN of the cell. It is optional, depending on the setting of the UL EARFCN configuration indicator (UlEarfcnCfgInd). If NO the value of this parameter is not specified, the default UL EARFCN is used, which is calculated based on the DL EARFCN. For details, see 3GPP TS 36.104. Indicates the DL EARFCN of the cell. NO For details, see the 3GPP TS 36.104.
NO
No
LBFD-002009 LBFD-001007 / TDLBFD-001008 LBFD-001008 / TDLBFD-001009
YES
No
Indicates the UL bandwidth of the cell, which is based on the number of resource blocks (RBs). The value CELL_BW_N25 indicates a cell bandwidth of 25 RBs. The value CELL_BW_N50 indicates a cell NO bandwidth of 50 RBs. The mapping between the parameter value and the actual cell bandwidth (that is, the number of RBs) can be deduced similarly. For details, see 3GPP TS 36.104.
YES
No
Indicates the DL bandwidth of the cell, which is based on the number of resource blocks (RBs). The value CELL_BW_N25 indicates a cell bandwidth of 25 RBs. The value CELL_BW_N50 indicates a cell NO bandwidth of 50 RBs. The mapping between the parameter value and the actual cell bandwidth (that is, the number of RBs) can be deduced similarly. For details, see 3GPP TS 36.104. Indicates the ID of the E-UTRAN cell. The combination of this parameter and the eNodeB ID forms the E-UTRAN cell identity. The NO combination of the E-UTRAN cell identity and the PLMN identity forms the ECGI. For details, see 3GPP TS 36.413. Indicates the physical cell ID. For NO details, see 3GPP TS 36.331. Indicates the additional spectrum emission, which restricts the NO emission power of the UEs in the cell. For details, see the 3GPP TS 36.101.
YES
No
YES
No
LBFD-002009 / TDLBFD-002009
YES
No
LBFD-002009 / TDLBFD-002009
NO
No
LBFD-002009 / TDLBFD-002009
Indicates the active state of the cell. It consists of the NO activated and deactivated states. Indicates the administrative state, which can be NO Unblock, High block, Middle block, or Low block. Indicates the length of the timer used to determine whether to block a middleblocking-priority cell. If CellAdminState is set to CELL_MIDDLE_BL NO OCK, the cell is deactivated when no user accesses the cell during the period of time specified by this parameter. The cell is also deactivated if the timer expires. Indicates the duplex mode of the cell. CELL_FDD indicates the FDD NO mode, and CELL_TDD indicates the TDD mode.
NO
No
None
NO
No
None
NO
No
None
YES
No
LBFD-002009 / TDLBFD-002009
Indicates the ratio of UL subframes to DL subframes in a TDD NO cell. For details, see 3GPP TS 36.211.
NO
No
LBFD-002009 / TDLBFD-002009 TDLBFD-00100701 TDLOFD-00102601
Indicates the ratio of special UL subframes to special DL NO subframes in a TDD cell. For details, see 3GPP TS 36.211.
NO
No
LBFD-002009 / TDLBFD-002009 TDLBFD-00100702 TDLOFD-00102602 TDLOFD-00102603
Indicates the cell specific offset for the serving cell. It affects the probability of triggering handovers from the serving cell to its NO intra-frequency neighboring cells. A smaller value of this parameter leads to a higher probability. For details, see 3GPP TS 36.331.
NO
No
None
Indicates the specific frequency offset of the serving cell. This parameter is contained in the intra-frequency measurement control information NO and is related to the handover difficulty between the serving cell and the neighboring cell. For details, see 3GPP TS 36.331.
NO
No
None
Indicates the first logical root sequence, which is used to generate the preamble sequence. Each logical root sequence corresponds to a NO physical root sequence. For the mapping between logical root sequences and physical root sequences, see 3GPP TS 36.211.
YES
No
LBFD-002010 / TDLBFD-002010
Indicates the speed flag of the cell. Set this parameter to ULTRA_HIGH_SPE ED if the cell is used to provide coverage for an ultra-high-speed NO railway. Set this parameter to HIGH_SPEED if the cell is used to provide coverage for a high way. Set this parameter to LOW_SPEED in other scenarios.
NO
No
Indicates the preamble format used in the cell. Cells set up on one LBBP must use the NO same preamble format. For details, see 3GPP TS 36.211.
NO
No
LBFD-002010 / TDLBFD-002010
Indicates the radius NO of the cell.
NO
No
LBFD-002010 / TDLBFD-002010
Indicates whether to configure bandwidth customization for the cell. Bandwidth customization is NO available only when the bandwidth is 5 MHz, 10 MHz, 15 MHz, or 20 MHz. Indicates the customized UL cell bandwidth. Bandwidth customization is NO available only when the bandwidth is 5 MHz, 10 MHz, 15 MHz, or 20 MHz.
NO
No
LOFD-001051
NO
No
LOFD-001051
Indicates the customized DL cell bandwidth. Bandwidth customization is NO available only when the bandwidth is 5 MHz, 10 MHz, 15 MHz, or 20 MHz.
NO
No
LOFD-001051
Indicates whether to set an emergency NO area ID.
NO
No
LBFD-002009 / TDLBFD-002009
Indicates the emergency area ID. NO For details, see 3GPP TS 36.413.
NO
No
LBFD-002009 / TDLBFD-002009
Indicates whether to set the maximum transmit power that NO a UE can apply to uplink transmission in the cell.
NO
No
LBFD-001001 LBFD-002009 LBFD-002026
Indicates the maximum transmit power that a UE can apply to uplink transmission in the cell. It is contained in system information block type 1 (SIB1). If this NO parameter is not specified in SIB1, the maximum transmit power that the UE can physically achieve is used as this maximum transmit power. Indicates whether to enable or disable NO the multi-RRU cell feature.
NO
No
LBFD-001001 LBFD-002009 LBFD-002026
NO
No
TDLOFD-001075
Indicates the type of NO the multi-RRU cell.
NO
No
TDLOFD-001075
Indicates the CPRI compression type of NO the cell.
NO
No
None
Indicates the state NO of the cell instance.
NO
Yes
None
Indicates the reason that causes the latest state change of the cell, which NO can be a cell activation success or a cell setup failure.
NO
Yes
None
Indicates the latest setup time of the cell.
NO
NO
Yes
None
Indicates the latest setup type of the cell.
NO
NO
Yes
None
Indicates the latest remove time of the cell.
NO
NO
Yes
None
Indicates the latest remove type of the cell.
NO
NO
Yes
None
Indicates the energy saving status of the cell. There are four states: RF intelligent shutdown, cell NO intelligent shutdown, low power consumption mode, and automatic power-off at a specified time.
NO
Yes
None
Indicates the slot number of the baseband processing board where the cell is configured.
NO
NO
Yes
None
Indicates the NO topology of the cell.
NO
Yes
None
Indicates the cabinet number of NO the RRU or RFU that serves the cell. Indicates the subrack number of NO the RRU or RFU that serves the cell. Indicates the slot number of the RRU NO or RFU that serves the cell. Indicates whether the cell is in the symbol power saving state.
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
NO
Yes
None
Indicates the maximum transmit power of the cell. The value 65535 indicates that this parameter is invalid, NO which can be changed by modifying the PDSCH configuration.
NO
Yes
None
Indicates the cell ID of the local cell. It uniquely identifies a YES cell within an eNodeB. Indicates the maximum number of layers, that is, the NO rank of beamforming.
YES
No
None
NO
No
TDLOFD-001049 TDLOFD-009003
YES
No
None
Indicates the interval between periodic measurement reports that are sent NO after a DL ICIC measurement event is triggered. For details, see 3GPP TS 36.331.
NO
No
Indicates the maximum number of cells to be included in each measurement report NO after a DL ICIC measurement event is triggered. For details, see 3GPP TS 36.331.
NO
No
Indicates the number of periodic measurement reports after a DL NO ICIC measurement event is triggered. For details, see 3GPP TS 36.331.
NO
No
Indicates the quantity to be included in the measurement report after a DL ICIC measurement event is triggered. The quantity can be RSRP or RSRQ. The measured RSRP values are stable, varying little with the load, and therefore there is little signal fluctuation. The NO measured RSRQ values vary with the load and are likely to reflect the signal quality of the cell in real time. If this parameter is set to BOTH, the actual quantity to be used is the same as the DL ICIC measurement trigger quantity. For details, see 3GPP TS 36.331. Indicates the quantity used in the evaluation of a DL ICIC measurement event. The quantity can be RSRP or RSRQ. The measured RSRP values are stable, varying little with the NO load, and therefore there is little signal fluctuation. The measured RSRQ values vary with the load but are likely to reflect the signal quality of the cell in real time.
NO
No
NO
No
Indicates the hysteresis for the DL ICIC measurement event. This parameter is used to decrease NO frequent triggering of event evaluations due to radio signal fluctuations. For details, see 3GPP TS 36.331. Indicates the time-totrigger for the DL ICIC measurement event. When detecting that the signal quality in the serving cell and that in at least one neighboring cell meet the entering condition, the UE NO does not send a measurement report to the eNodeB immediately. Instead, the UE sends a report only when the signal quality continuously meets the entering condition during the time-to-trigger.
NO
No
NO
No
Indicates the offset for the DL ICIC measurement event. If this parameter is set to a large value, the signal quality of the neighboring cell NO must be significantly better than that of the serving cell before a DL ICIC measurement event can be triggered. For details, see 3GPP TS 36.331.
NO
No
Indicates the local ID of the cell. It YES uniquely identifies a cell within a BS. Indicates the switch for the functionality of the low power consumption mode. The cell can enter the low power NO consumption mode only when this parameter is set to ON and specific conditions are met.
YES
No
LOFD-001040 / TDLOFD-001040
NO
No
LOFD-001040
Indicates the switch for forcibly entering the low power consumption mode. When both this switch and the functionality switch are set to ON, the cell enters the low power consumption mode as soon as the wait time for entering the mode elapses, regardless of whether it is within the low power consumption period. NO When the functionality switch is set to ON but this switch is set to OFF, the cell enters the low power consumption mode as soon as the wait time for entering the mode elapses, if a Mains Input Abnormal alarm indicating an absence of AC power supplies is reported within the low power Indicates the start time of the low NO power consumption mode. Indicates the stop time of the low power consumption mode. If the stop time is earlier than NO or the same as the start time, the stop time is assumed to be a time of the next day. Indicates the duration in which the transmit power for services is NO reduced in the cell in low power consumption mode.
NO
No
LOFD-001040
NO
No
LOFD-001040
NO
No
LOFD-001040 / TDLOFD-001040
NO
No
LOFD-001040 / TDLOFD-001040
Indicates the duration in which the reference signal transmit power is NO reduced in the cell in low power consumption mode. Indicates the duration in which RF channels are NO shut down in the cell in low power consumption mode. Indicates the percentage of the transmit power for services to the total transmit power for services when the NO low power consumption mode is implemented by means of reducing the transmit power for services. Indicates the amount by which the reference signal transmit power is NO reduced in the cell in low power consumption mode.
NO
No
LOFD-001040 / TDLOFD-001040
NO
No
LOFD-001040 / TDLOFD-001040
NO
No
LOFD-001040 / TDLOFD-001040
NO
No
LOFD-001040 / TDLOFD-001040
Indicates the duration when the cell stays in normal mode before entering the low power consumption mode. In low power consumption mode, a cell automatically takes the following actions in sequence: (1) reduces the transmit power for services; (2) reduces the transmit power for NO reference signals; (3) shuts down power amplifiers (PAs) for half of the TX channels in the cell; (4) shuts down the cell. This duration smoothes the transition from the normal mode to the low power consumption mode for the cell. If the conditions for the cell to enter the low power consumption mode are no longer Indicates the local ID of the cell. It uniquely identifies a YES cell within an eNodeB.
NO
No
LOFD-001040 / TDLOFD-001040
YES
No
None
Indicates whether to set the upper and lower limits of the CIO adjustment range for the cell. If this parameter is set to CFG, the CIO for the cell can be changed by an amount within the range specified by the upper and lower limits. If this parameter is set to NOT_CFG, the upper and lower limits of the CIO NO adjustment range for the cell in intrafrequency MRO are calculated by using the following formulas: Lower limit = Off + ofs + ocs - ofn + Hys - 5, Upper limit = Off + ofs + ocs - ofn + Hys -1, where Off is the offset for intrafrequency handover, ofs and ofn are the frequency-specific offsets for the
NO
No
LOFD-002005 / TDLOFD-002005
Indicates the upper limit of the CIO NO adjustment range for the cell.
NO
No
LOFD-002005 / TDLOFD-002005
Indicates the lower limit of the CIO adjustment range for the cell.
NO
NO
No
LOFD-002005 / TDLOFD-002005
Indicates the local cell ID. It uniquely identifies a cell within a BS.
YES
YES
No
LBFD-001001 / TDLBFD-001001
Indicates the Allocation and Retention Priority (ARP) threshold for the Golden-level services. A service is defined as a Golden-level NO service if its ARP value is smaller than this threshold. The service priority has a negative correlation with the ARP value.
NO
No
Indicates the Allocation and Retention Priority (ARP) threshold for the Silver-level services. A service is defined as a Silver-level service if its ARP value is smaller than or equal to the value of this parameter and is larger than the NO value of GoldServiceArpThd . A service is defined as a Bronzelevel service if its ARP value is larger than the value of this parameter. The service priority has a negative correlation with the ARP value. Indicates the admission threshold for the handed-over service with QCI of 1. This threshold applies to both UL and DL. If the satisfaction rate of services with QCI of 1 is above or equal to this threshold, the NO handed-over service with QCI of 1 can be admitted. If the satisfaction rate of services with QCI of 1 is below this threshold, the handed-over service with QCI of 1 cannot be admitted.
NO
No
NO
No
Indicates the admission threshold for the handed-over service with QCI of 2. This threshold applies to both UL and DL. If the satisfaction rate of services with QCI of 2 is above or equal to this threshold, the NO handed-over service with QCI of 2 can be admitted. If the satisfaction rate of services with QCI of 2 is below this threshold, the handed-over service with QCI of 2 cannot be admitted. Indicates the admission threshold for the handed-over service with QCI of 3. This threshold applies to both UL and DL. If the satisfaction rate of services with QCI of 3 is above or equal to this threshold, the NO handed-over service with QCI of 3 can be admitted. If the satisfaction rate of services with QCI of 3 is below this threshold, the handed-over service with QCI of 3 cannot be admitted.
NO
No
NO
No
Indicates the admission threshold for the handed-over service with QCI of 4. This threshold applies to both UL and DL. If the satisfaction rate of services with QCI of 4 is above or equal to this threshold, the NO handed-over service with QCI of 4 can be admitted. If the satisfaction rate of services with QCI of 4 is below this threshold, the handed-over service with QCI of 4 cannot be admitted.
NO
No
Indicates the offset for admission of new Gold-level services. The value of this parameter applies in both UL and DL. New Goldlevel services and handed-over services with QCI N can be admitted if both the following conditions are met: (1) The satisfaction rate of services with QCI N is higher than or equal to the NO sum of this offset and the admission threshold for the handed-over services with QCI N; (2) The satisfaction rate of services with any other QCI is higher than the corresponding admission threshold for the handed-over services with that QCI. If the satisfaction rate of services with any
NO
No
Indicates the offset for admission of new Silver-level services. The value of this parameter applies in both UL and DL. New Silverlevel services and handed-over services with QCI N can be admitted if both the following conditions are met: (1) The satisfaction rate of services with QCI N is higher than or equal to the NO sum of this offset and the admission threshold for the handed-over services with QCI N; (2) The satisfaction rate of services with any other QCI is higher than the corresponding admission threshold for the handed-over services with that QCI. If the satisfaction rate of services with any
NO
No
Indicates the offset for admission of new Bronze-level services. The value of this parameter applies in both UL and DL. New Bronze-level services and handed-over services with QCI N can be admitted if both the following conditions are met: (1) The satisfaction rate of services with QCI N is higher NO than or equal to the sum of this offset and the admission threshold for the handed-over services with QCI N; (2) The satisfaction rate of services with any other QCI is higher than the corresponding admission threshold for the handed-over services with that QCI. If the satisfaction rate of
NO
No
Indicates the congestion threshold for services with QCI of 1. This threshold applies to both UL and DL. If the satisfaction rate of services with QCI of 1 in the cell becomes lower than this threshold, the services with QCI of NO 1 enter the congested state. If the satisfaction rate of services with QCI of 1 in the cell becomes higher than the sum of this threshold and the congestion relief offset, the services with QCI of 1 leave the congested state.
NO
No
NO
No
Indicates the congestion threshold for services with QCI of 3. This threshold applies to both UL and DL. If the satisfaction rate of the services with QCI of 3 in the cell becomes lower than this threshold, the services with NO QCI of 3 enter the congested state. If the satisfaction rate of services with QCI of 3 in the cell becomes higher than the sum of this threshold and the congestion relief offset, the services with QCI of 3 leave the congested state.
NO
No
NO
No
Indicates the rate reduction proportion for Gold-level GBR services. When congestion occurs, the rate that the scheduling algorithm provides for Gold-level GBR services (except VoIP services) is the product of GBR and this proportion.This NO parameter will be removed in the later versions. In this version, the setting of this parameter is still synchronized between the M2000 and the eNodeB, but it is no longer used internally. Therefore, avoid using this parameter.
NO
No
Indicates the rate reduction proportion for Silver-level GBR services. When congestion occurs, the rate that the scheduling algorithm provides for Silver-level GBR services (except VoIP services) is the product of the GBR and this proportion.This NO parameter will be removed in the later versions. In this version, the setting of this parameter is still synchronized between the M2000 and the eNodeB, but it is no longer used internally. Therefore, avoid using this parameter.
NO
No
Indicates the rate reduction proportion for Bronze-level GBR services. When congestion occurs, the rate that the scheduling algorithm provides for Bronze-level GBR services (except VoIP services) is the product of GBR and this proportion.This NO parameter will be removed in the later versions. In this version, the setting of this parameter is still synchronized between the M2000 and the eNodeB, but it is no longer used internally. Therefore, avoid using this parameter. Indicates the threshold for high PRB usage by GBR services. The value of this parameter is expressed in percentage and applies to both UL and DL. If the MAC layer detects that the PRB usage by GBR services NO exceeds the threshold, the usage is high. In this situation, new GBR services are not admitted if GbrUsageSwitch under the RacAlgoSwitch parameter is turned on.
NO
No
NO
No
Indicates the threshold for low PRB usage by GBR services. The value of this parameter is expressed in percentage and applies to both UL NO and DL. If the MAC layer detects that the PRB usage by GBR services falls below the threshold, the usage is considered to be low.
NO
No
Indicates the Allocation and Retention Priority (ARP) threshold for low Energy Efficiency Ratio (EER) services. If the ARP value of a service is less than the value of this parameter, the service will not be released for congestion NO control.This parameter will be removed in the later versions. In this version, the setting of this parameter is still synchronized between the M2000 and the eNodeB, but it is no longer used internally. Therefore, avoid using this parameter.
NO
No
Indicates the congestion release offset. The service of a specific QCI exits the congestion state if the satisfaction rate of the service exceeds the sum of this congestion release offset and the congestion NO threshold for the QCI. The service retains the congestion state if the satisfaction rate is below the sum of this congestion release offset and the congestion threshold for the QCI. Indicates the Allocation and Retention Priority (ARP) threshold for preemption. The services that have ARP values larger than or equal to the value of this parameter are preemptible.This parameter will be NO removed in the later versions. In this version, the setting of this parameter is still synchronized between the M2000 and the eNodeB, but it is no longer used internally. Therefore, avoid using this parameter.
NO
No
NO
No
Indicates the threshold for deciding on whether the UL RB usage is high. This threshold applies to UL admission decision. NO If the UL RB usage reported by the MAC layer is above this threshold, the UL RB usage is assumed to be high.
NO
No
Indicates the threshold for deciding on whether the DL resource block (RB) usage is high. This threshold applies to DL admission decision. NO If the usage of the DL RB reported by the MAC layer is above this threshold, the DL RB usage is assumed to be high.
NO
No
Indicates the threshold for deciding on whether the UL RB usage is low. It applies to UL admission decision. NO If the UL RB usage reported by the MAC layer is below this threshold, the UL RB usage is assumed to be low.
NO
No
Indicates the threshold for deciding on whether the DL resource block (RB) usage is low. This threshold applies to DL admission decision. NO If the usage of the DL RB reported by the MAC layer is below this threshold, the usage of the DL RB is assumed to be low.
NO
No
Indicates the maximum number of non-GBR services (excluding IP Multimedia Subsystem [IMS] NO services) that can be provided by a cell. The value of this parameter is applied to both UL and DL.
NO
No
Indicates the local ID of the cell. It YES uniquely identifies a cell within a BS. Indicates whether to enable or disable RF channel intelligent shutdown for the cell. RF channel intelligent NO shutdown can be performed in the cell only when this parameter is set to ON and certain conditions are met.
YES
No
LOFD-001039 / TDLOFD-001039
NO
No
LOFD-001039 / TDLOFD-001039
Indicates the start time of the cell RF intelligent shutdown.
NO
NO
No
LOFD-001039
Indicates the stop time of RF channel intelligent shutdown for the cell. If the stop time is earlier NO than or the same as the start time, the stop time is assumed to be a time of the next day. Indicates the value by which the reference signal power is increased during the RF channel intelligent shutdown period. The reference signal power NO increases by the value specified by this parameter to ensure coverage of the cell. If this parameter is set to a value greater than 3, the value 3 applies in effect. Indicates the local identity of the cell. It uniquely identifies a YES cell within an eNodeB.
NO
No
LOFD-001039 / TDLOFD-001039
NO
No
LOFD-001039 / TDLOFD-001039
YES
No
None
Indicates the switch for the remote interference cancellation algorithm. If this switch is turned on, the eNodeB performs remote interference detection and NO records in call history record (CHR) logs if any interference is detected. If this switch is turned off, the eNodeB does not perform remote interference detection. Indicates the number of empty symbols in an uplink pilot timeslot (UpPTS). If this parameter is set to a non-zero value N, then no data is transmitted within the N symbols starting from the NO first symbol in the UpPTS. Note that, for any given special subframe configuration, the value of this parameter cannot be greater than the total number of symbols contained in the UpPTS. Indicates whether to empty the last NO symbol in each uplink subframe. Indicates the local ID of the cell. It YES uniquely identifies a cell within a BS.
NO
No
None
NO
No
None
NO
No
None
YES
No
LOFD-001042 / TDLOFD-001042
Indicates whether to enable or disable cell intelligent shutdown. Cell intelligent shutdown can be performed only when this parameter is set to ON and specific conditions are met. For cell intelligent NO shutdown, each intra-eNodeB interfrequency neighboring cell (also called basic cell) must have its cell intelligent shutdown enabled and the UL or DL PRB usage threshold set to 0. Indicates the start time of cell intelligent shutdown. If the stop time is earlier NO than or the same as the start time, the stop time is assumed to be a time of the next day. Indicates the stop time of cell intelligent shutdown. If the stop time is earlier NO than or the same as the start time, the stop time is assumed to be a time of the next day.
NO
No
LOFD-001042 / TDLOFD-001042
NO
No
LOFD-001042 / TDLOFD-001042
NO
No
LOFD-001042 / TDLOFD-001042
Indicates the DL PRB usage threshold for cell intelligent shutdown. For cell intelligent shutdown, each intra-eNodeB interfrequency neighboring cell (also called basic cell) must have its cell intelligent shutdown enabled and the UL or DL PRB usage threshold set to 0. NO The local cell enters cell intelligent shutdown mode if its UL and DL loads are lower than the UL and DL PRB usage thresholds, respectively, and the total load of the local and basic cells is lower than the sum of the UL PRB usage threshold and offset as well as the sum of the DL PRB usage threshold and
NO
No
LOFD-001042 / TDLOFD-001042
Indicates the DL PRB usage offset for cell intelligent shutdown. For cell intelligent shutdown, each intra-eNodeB interfrequency neighboring cell (also called basic cell) must have its cell intelligent shutdown enabled and the UL or DL PRB usage threshold set to 0. The local cell enters NO cell intelligent shutdown mode if its UL and DL loads are lower than the UL and DL PRB usage thresholds, respectively, and the total load of the local and basic cells is lower than the sum of the UL PRB usage threshold and offset as well as the sum of the DL PRB usage threshold and offset. The local cell
NO
No
LOFD-001042 / TDLOFD-001042
Indicates the UL PRB usage threshold for cell intelligent shutdown. For cell intelligent shutdown, each intra-eNodeB interfrequency neighboring cell (also called basic cell) must have its cell intelligent shutdown enabled and the UL or DL PRB usage threshold set to 0. NO The local cell enters cell intelligent shutdown mode if its UL and DL loads are lower than the UL and DL PRB usage thresholds, respectively, and the total load of the local and basic cells is lower than the sum of the UL PRB usage threshold and offset as well as the sum of the DL PRB usage threshold and
NO
No
LOFD-001042 / TDLOFD-001042
Indicates the UL PRB usage offset for cell intelligent shutdown. For cell intelligent shutdown, each intra-eNodeB interfrequency neighboring cell (also called basic cell) must have its cell intelligent shutdown enabled and the UL or DL PRB usage threshold set to 0. The local cell enters NO cell intelligent shutdown mode if its UL and DL loads are lower than the UL and DL PRB usage thresholds, respectively, and the total load of the local and basic cells is lower than the sum of the UL PRB usage threshold and offset as well as the sum of the DL PRB usage threshold and offset. The local cell Indicates the local ID of the cell. It YES uniquely identifies a cell within a BS.
NO
No
LOFD-001042 / TDLOFD-001042
YES
No
None
Indicates the interval between periodic measurement reports that are sent after a UL ICIC measurement event is triggered. For details, see 3GPP TS 36.331. In this version, this NO parameter still supports setting synchronization between the M2000 and the eNodeB, but is no longer used internally. Avoid using this parameter as it will be removed from later versions. Indicates the maximum number of cells to be included in each measurement report after a UL ICIC measurement event is triggered. For details, see 3GPP TS 36.331. In this version, this NO parameter still supports setting synchronization between the M2000 and the eNodeB, but is no longer used internally. Avoid using this parameter as it will be removed from later versions.
NO
No
NO
No
Indicates the number of periodic measurement reports after a UL ICIC measurement event is triggered. For details, see 3GPP TS 36.331. In this version, this parameter still NO supports setting synchronization between the M2000 and the eNodeB, but is no longer used internally. Avoid using this parameter as it will be removed from later versions.
NO
No
Indicates the quantity to be included in the measurement report for a UL ICIC measurement event. The quantity can be RSRP or RSRQ. The measured RSRP values are stable, varying little with the load, and therefore there is little signal fluctuation. The measured RSRQ values vary with the NO load and are likely to reflect the signal quality of the cell in real time. If this parameter is set to BOTH, the actual quantity to be used is the same as the triggering quantity for the UL ICIC measurement event. For details, see 3GPP TS 36.331. In this version, this parameter still supports setting
NO
No
Indicates the quantity used in the evaluation of a UL ICIC measurement event. The quantity can be RSRP or RSRQ. The measured RSRP values are stable, varying little with the load, and therefore there is little signal fluctuation. The measured RSRQ values vary with the load and are likely NO to reflect the signal quality of the cell in real time. In this version, this parameter still supports setting synchronization between the M2000 and the eNodeB, but is no longer used internally. Avoid using this parameter as it will be removed from later versions.
NO
No
Indicates the hysteresis for the UL ICIC measurement event. This parameter is used to decrease frequent triggering of event evaluations due to radio signal fluctuations. For details, see 3GPP TS 36.331. NO In this version, this parameter still supports setting synchronization between the M2000 and the eNodeB, but is no longer used internally. Avoid using this parameter as it will be removed from later versions.
NO
No
Indicates the time-totrigger for the UL ICIC measurement event. When detecting that the signal quality in the serving cell and that in at least one neighboring cell meet the entering condition, the UE does not send a measurement report to the eNodeB immediately. Instead, the UE sends a report only NO when the signal quality continuously meets the entering condition during the time-to-trigger. In this version, this parameter still supports setting synchronization between the M2000 and the eNodeB, but is no longer used internally. Avoid using this parameter as it will be removed from later versions.
NO
No
Indicates the offset for the UL ICIC measurement event. If this parameter is set to a large value, the signal quality of the neighboring cell NO must be significantly better than that of the serving cell before a UL ICIC measurement event is triggered. For details, see 3GPP TS 36.331.
NO
No
YES
No
None
Indicates the UL scheduling policy, which determines the scheduling priority order in which UEs are arranged in UL. There are four UL scheduling strategies: MAX C/I, proportional fair (PF), round Robin (RR), and enhanced proportional fair (EPF). The MAX C/I policy schedules UEs in descending NO order of average signal to interference plus noise ratio (SINR). The PF policy schedules UEs in ascending order of ratio of the data rate to the SINR. The RR policy schedules each UE in sequence, and therefore each UE has an equal opportunity to be scheduled. The EPF policy
NO
No
Indicates the switch that is used to control whether to enable or disable UL adaptive HARQ. If this switch is set to ADAPTIVE_HARQ_ SW_OFF, UL data is retransmitted by non-adaptive synchronous HARQ. If this switch is set to ADAPTIVE_HARQ_ SW_ON, UL data is retransmitted by NO adaptive synchronous HARQ. If this switch is set to ADAPTIVE_HARQ_ SW_SEMION, adaptive HARQ is triggered when a UL grant is delivered to an HARQ process that is previously suspended due to reasons such as resource collision, activation of a measurement gap, and PDCCH Indicates the target IBLER of the SINR adjustment algorithm. A greater parameter value NO indicates a greater SINR adjustment value, and thus a higher-level MCS is used. Indicates the ratio of the maximum bandwidth resources that the uplink scheduler NO can allocate to preallocation users to the total system bandwidth.
NO
No
LBFD-002006 / TDLBFD-002006
NO
No
LBFD-001006 / TDLBFD-001006
NO
No
LOFD-00101502 / TDLOFD-00101502
Indicates the minimum interval between two preallocations. That is, the actual interval between two preNO allocations of one UE must be longer than or equal to the value of this parameter. Indicates the data amount preallocated to each user.
NO
No
LOFD-00101502 / TDLOFD-00101502
NO
NO
No
LOFD-00101502 / TDLOFD-00101502
Indicates whether frequency hopping (FH) is enabled or NO disabled and which FH type is used.
NO
No
Indicates the percentage of free shared RBs on the PUSCH in scheduling based on free users and subscribers. The other RBs on the PUSCH are allocated to subscribers. When sufficient capacity is available, the percentage of RBs occupied by free NO users and that occupied by subscribers will reach the preset values. Changes in this parameter affect the percentage of RBs for free users and that for subscribers. The value of this parameter cannot be changed when the cell is active.
NO
No
LOFD-00101502 / TDLOFD-00101502 LBFD-002023 / TDLBFD-002023 LBFD-002024 / TDLBFD-002024
Indicates the data length that the UL scheduler assigns to UEs that have sent scheduling requests. Within the NO data length, the UEs reports their buffer status and transmit certain data.
NO
No
LOFD-00101502 / TDLOFD-00101502
Indicates the threshold for the number of consecutive zeropayload packets received by the eNodeB. After receiving consecutive zeroNO payload packets of a number that is equal to the value of this parameter, the eNodeB performs implicit release of semi-persistent resources. Indicates the local identity of the cell. It uniquely identifies a YES cell within an eNodeB.
NO
No
LOFD-00101502 / TDLOFD-00101502
YES
No
LOFD-001074
Indicates the switch used to enable or disable inter-RAT cell shutdown. If this switch is turned on, regardless of the inter-RAT cell load, UEs in a lightly loaded E-UTRAN cell are handed over or redirected to neighboring GERAN or UTRAN NO cells. Then, the EUTRAN cell does not serve any UEs. In this situation, the carrier of this cell can be shut down to save energy. Currently, inter-RAT cell shutdown applies only to overlapping areas of the E-UTRAN and the UTRAN.
NO
No
LOFD-001074
Indicates the start time of inter-RAT cell shutdown. If the stop time is earlier than or the same as the start time, the stop time is assumed to be the time of the next day. If the switch for inter- NO RAT cell shutdown is turned on, interRAT cell shutdown can be performed during the period specified by the start time and stop time of inter-RAT cell shutdown.
NO
No
LOFD-001074
Indicates the stop time of inter-RAT cell shutdown. If the stop time is earlier than or the same as the start time, the stop time is assumed to be the time of the next day. If the switch for inter- NO RAT cell shutdown is turned on, interRAT cell shutdown can be performed during the period specified by the start time and stop time of inter-RAT cell shutdown.
NO
No
LOFD-001074
Indicates the threshold number of UEs served by the cell. Inter-RAT cell shutdown is performed if shutdown conditions are met and the number of UEs served by the cell is less than or equal to this threshold. The shutdown conditions include the inter-RAT cell NO shutdown switch, specified duration, and UL/DL physical resource block (PRB) thresholds. In this situation, the eNodeB automatically hands over or redirects the UEs in the EUTRAN cell to GERAN or UTRAN cells, and then shuts down the carrier of the EUTRAN cell.
NO
No
LOFD-001074
Indicates the threshold number of DL physical resource blocks (PRBs) in the cell. Inter-RAT cell shutdown is performed if shutdown conditions are met and the number of UL PRBs and DL PRBs in the cell are less than or equal to the corresponding PRB thresholds. The shutdown NO conditions include the setting of the inter-RAT cell shutdown switch, specified duration, and threshold of the number of UEs served by the cell. In this situation, the eNodeB automatically hands over or redirects the UEs in the EUTRAN cell to GERAN or UTRAN cells, and then shuts down the
NO
No
LOFD-001074
Indicates the threshold number of UL physical resource blocks (PRBs) in the cell. Inter-RAT cell shutdown is performed if shutdown conditions are met and the number of UL PRBs and DL PRBs in the cell are less than or equal to the corresponding PRB thresholds. The shutdown NO conditions include the setting of the inter-RAT cell shutdown switch, specified duration, and threshold of the number of UEs served by the cell. In this situation, the eNodeB automatically hands over or redirects the UEs in the EUTRAN cell to GERAN or UTRAN cells, and then shuts down the Indicates the local ID of the cell. It YES uniquely identifies a cell within a BS.
NO
No
LOFD-001074
YES
No
None
RachAdjSwitch: Indicates the switch used to enable or disable random access channel (RACH) resource adjustment, which adaptively adjusts the RACH resources in the cell based on the access type and the number of accesses. If the switch is turned off, RACH resource adjustment is NO disabled. HoRaSwitch: Indicates the switch used to control the random access mode applied during handovers. If the switch is turned on, the eNodeB instructs UEs to use the noncontention-based random access mode during handovers. If the switch is turned off, the
NO
No
Indicates the switch used to enable or disable change in the cell-specific SRS subframe configuration (that is, the adjustment on the setting of the SrsSubframeCfg parameter). If the switch is turned on, the algorithm NO dynamically adjusts the SRS subframe configuration based on the usage of cell resources. If the switch is turned off, the algorithm uses the initial configuration and does not perform dynamic switching.
NO
No
LBFD-001001 / TDLBFD-001001
Indicates the switch used to enable or disable the PUCCH resource adjustment algorithm. If the switch is turned on, PUCCH resource adjustment is NO initiated when the PUCCH resources are insufficient or excessive. If the switch is turned off, PUCCH resource adjustment is disabled.
NO
No
LBFD-001001 / TDLBFD-001001
Indicates the switch that is used to enable and disable the Active Queue Management (AQM) algorithm. If this switch is set to ON, the AQM function is enabled to prevent or control congestion. The length of the PDCP NO packet queue is maintained at a relatively small value to help achieve an appropriate tradeoff between throughput and time latency. If this switch is set to OFF, the AQM function is disabled.
NO
No
LOFD-001027 / TDLOFD-001027
CqiAdjAlgoSwitch: Indicates the switch used to control whether to allow the eNodeB to adjust the UE-reported CQI on the basis of Initial Block Error Rate (IBLER). If this switch is turned on, the CQI adjustment algorithm is enabled. In the case, the eNodeB would adjust the UEreported CQI based NO on the IBLER. If this switch is turned off, the CQI adjustment algorithm is disabled. In this case, the eNodeB would not adjust the UE-reported CQI based on the IBLER. StepVarySwitch: Indicates the switch used to enable or disable the variablestep-based adjustment Indicates the switch used to enable or disable radio link NO failure (RLF) detection for UL links. Indicates the switch used to enable or NO disable dynamic voltage adjustment.
NO
No
NO
No
None
NO
No
LOFD-001025
Indicates the switches used to enable or disable the admission and load control algorithms. DlSwitch: Indicates whether to enable or disable the satisfaction ratebased admission control algorithm in the downlink. If this switch is turned on, the algorithm is enabled. If this switch is turned off, NO the algorithm is disabled.The satisfaction rate of services with the QCI of 1 is calculated by using the same method as that for VoIP services. However, this method cannot be used to calculate the satisfaction rate of non-VoIP services. Therefore, if services with the QCI of 1 are all VoIP services, it is
NO
No
LBFD-001001 / TDLBFD-001001 LBFD-002023 / TDLBFD-002023 LBFD-002024 / TDLBFD-002024 LOFD-00102901 / TDLOFD-00102901
Indicates the switches used to enable or disable load balancing algorithms. There are six load balancing switches, which are used to control the intrafrequency, intrafrequency idle, interfrequency, UTRAN, GERAN, and CDMA2000 load balancing algorithms, respectively. If one NO switch is set to ON, the corresponding algorithm is enabled to balance the loads between neighboring cells of the specified category. If IntraFreqMlbSwitch is set to ON, the intra-frequency load balancing is enabled and therefore IntraFreqIdleMlbSwi tch becomes valid.
NO
No
LBFD-001001 / TDLBFD-001001 LOFD-001032 / TDLOFD-001032 LOFD-001044 / TDLOFD-001044 LOFD-001045 / TDLOFD-001045
Indicates the switches used to enable or disable power control for PDSCH, PDCCH, and PHICH. PdschSpsPcSwitch: Indicates the switch for power control during semipersistent scheduling on the PDSCH. If the switch is turned off, power is allocated evenly during semipersistent NO scheduling on the PDSCH. If the switch is turned on, power control is applied during semipersistent scheduling on the PDSCH, ensuring communication quality (indicated by IBLER) of VoIP services in the QPSK modulation scheme. PhichInnerLoopPcS witch: Indicates the switch for PHICH
NO
No
Indicates the switches used to enable or disable power control for PUSCH and PUCCH. CloseLoopSpsSwitc h: If this switch is turned off, closedloop power control is not performed for PUSCH in semipersistent scheduling mode. If this switch is turned on, TPC commands are adjusted based NO on correctness of the initially received data packet to decrease the IBLER. InnerLoopPuschSwi tch: If this switch is turned off, innerloop power control is not performed for PUSCH in dynamic scheduling mode. If this switch is turned on, inner-loop power control is performed for PUSCH in dynamic BfSwitch: Indicates whether to enable or disable the beamforming algorithm. If the switch is turned on, UEs in the cell can be served by the beamforming algorithm. If the NO switch is turned off, UEs in the cell cannot be served by the beamforming algorithm. The beamforming algorithm is disabled by default. It must be enabled manually if required.
NO
No
NO
No
TDLOFD-001049 TDLOFD-001061 TDLOFD-009003
Indicates the switches related to DL scheduling in the cell. FreqSelSwitch: Indicates whether to enable or disable frequency selection and scheduling. If this switch is turned on, data is transmitted on the frequency band with good-quality channels. ServiceDiffSwitch: Indicates whether to NO enable or disable service differentiation. If this switch is turned on, service differentiation is available. If this switch is turned off, service differentiation is unavailable. SpsSchSwitch: Indicates whether to enable or disable semi-persistent scheduling during talk spurts of VoIP
NO
No
Indicates the switches related to uplink (UL) scheduling in the cell. The switches are used to enable or disable specific UL scheduling functions. SpsSchSwitch: Indicates whether to enable or disable semi-persistent scheduling during talk spurts of VoIP services. If this switch is turned on, NO semi-persistent scheduling is applied. If this switch is turned off, dynamic scheduling is applied. SinrAdjustSwitch: Indicates whether to adjust the measured SINR based on ACK/NACK messages in a UL HARQ process. PreAllocationSwitch : Indicates whether to enable or disable Indicates whether to enable or disable eRAN sharing for admission and scheduling. If this switch is turned on, NO operators share data channel resources according to the specified percentages.
NO
No
LBFD-002025 / TDLBFD-002025 LOFD-001015 / TDLOFD-001015 LOFD-001048 / TDLOFD-001048 LOFD-001016 / TDLOFD-001016 LOFD-001067
NO
No
Indicates the switch related to the frequency-prioritybased interfrequency handover. FreqPriorIFHOSwitc h: Indicates the frequency-prioritybased interfrequency handover switch.Frequencypriority-based interfrequency handover is applicable when the eNodeB provides dual NO coverage and one frequency is preferred for carrying services. If this switch is set to On, the frequencypriority-based interfrequency handover will be triggered even when the serving cell provides a good signal quality. If this switch is set to Off, the frequencypriority-based interfrequency handover Indicates the switch used to enable or disable the multiuser beamforming algorithm. If this switch and the switch for the beamforming algorithm are both NO turned on, the multiuser beamforming algorithm is enabled. If this switch is turned off, the multiuser beamforming algorithm is disabled.
NO
No
LOFD-001032 / TDLOFD-001032
NO
No
LBFD-001001 / TDLBFD-001001
Indicates the switch used to enable or disable distancebased handovers. If this switch is turned on, distance-based NO handovers are allowed. If this switch is turned off, distance-based handovers are prohibited. Indicates the switch for the access barring algorithm. If this parameter is set to ACBAR_SWITCH_ DYNAMIC, dynamic access barring is enabled. In this situation, the access probability factor and the average access barring duration for mobile-originated calls are dynamically NO adjusted based on the current cell load. If this parameter is set to ACBAR_SWITCH_ STATIC, static access barring is also enabled. In this situation, the access probability factor and the average access barring duration for mobile-originated calls are configured in the access barring information. Indicates the switch used to enable or NO disable the UL CoMP algorithm.
NO
No
NO
No
NO
No
LBFD-001001 / TDLBFD-001001
Indicates the switch used to enable or disable MRC/IRC adaptation. MRC is short for maximum NO ratio combining, and IRC is short for interference rejection combining. Indicates the local ID of the cell. It YES uniquely identifies a cell within a BS.
NO
No
None
YES
No
None
Indicates the band division scheme used in downlink ICIC. The band division in the cell is adjusted according NO to the setting of this parameter so that the edge bands for neighboring cells do not overlap.
NO
No
Indicates the local ID of the cell. It YES uniquely identifies a cell within a BS. Indicates the offset of the DCI power relative to the reference signal NO power when the PDCCH channel carries dedicated control information. Indicates the local ID of the cell. It YES uniquely identifies a cell within a BS.
YES
No
LBFD-002016 / TDLBFD-002016
NO
No
LBFD-002016 / TDLBFD-002016
YES
No
LBFD-002016 / TDLBFD-002016
Indicates the PA value of cell center UEs when DL ICIC is enabled.
NO
NO
No
LBFD-002016 / TDLBFD-002016
Indicates the PA value of cell edge UEs when DL ICIC is enabled.
NO
NO
No
LBFD-002016 / TDLBFD-002016
Indicates the local ID of the cell. It YES uniquely identifies a cell within a BS. Indicates the power offset between the PHICH TX power and the RS power. NO This offset is used when PHICH power control is disabled. Indicates the local ID of the cell. It YES uniquely identifies a cell within a BS.
YES
No
LBFD-002016 / TDLBFD-002016
NO
No
LBFD-002016 / TDLBFD-002016
YES
No
None
Indicates the switch of the DL scheduling policy. According to the Max C/I scheduling policy, the UE with good-quality channels are scheduled and hence the spectral efficiency is very high. The QoS and fairness among users, however, cannot be ensured. The Max C/I scheduling policy NO can be used to verify the maximum capacity of the system. The RR scheduling policy is the fairest scheduling policy. When RR is adopted, the system capacity is the smallest. Therefore, RR is used only to verify the upper bound of the scheduling fairness in the system. In terms of the
NO
No
Indicates the percentage of free shared RBs on the PDSCH in scheduling based on pay-free users and pay users. The other RBs on the PDSCH are allocated to pay users. When sufficient capacity is available, the percentage of RBs occupied by payNO free users and that occupied by pay users will reach the preset values. Changes in this parameter affect the percentage of RBs for pay-free users and that for pay users. Modifying the value of this parameter for an active cell will lead to the re-setup of the cell.
NO
No
Indicates the weight of the point-to-point (P2P) service, which is used in enhanced proportional fair (EPF) scheduling. The value of this parameter is used in calculating the priority of a UE during scheduling and therefore determines the amount of physical NO resources to be allocated to the UE that requests the P2P service. The P2P service priority has a positive correlation with the value of this parameter. This parameter is valid only when the service differentiation function is enabled.
NO
No
LOFD-001064/ TDLOFD-001064
Indicates the weight of the non-P2P service used in enhanced proportional fair (EPF) scheduling. The value of this parameter is used in calculating the priority of a UE during scheduling and therefore determines the amount of physical resources to be NO allocated to the UE that requests the non-P2P service. The priority of the non-P2P service has a positive correlation with the value of this parameter. This parameter is valid only when the service differentiation function is enabled.
NO
No
LOFD-001064/ TDLOFD-001064
Indicates the maximum number of layers (the rank) in the implementation of multiple-input multiple-output (MIMO) in DL scheduling.
NO
NO
No
LOFD-00101502 LBFD-002023 LBFD-002024
YES
No
None
Indicates the threshold for triggering intrafrequency load balancing. Intrafrequency load balancing is started if the cell load exceeds the sum of the threshold and the offset, and is stopped if the cell NO load falls below the threshold.The sum of this threshold and the load offset must be greater than the sum of the UL/DL PRB usage threshold and UL/DL PRB offset for cell intelligent shutdown. Indicates the threshold for triggering interfrequency load balancing. Load balancing between the cell and its interfrequency neighboring cell is triggered if the cell load exceeds the sum of this threshold and the NO offset, and is stopped if the cell load falls below this threshold.The sum of this threshold and the load offset must be greater than the sum of the UL/DL PRB usage threshold and UL/DL PRB offset for cell intelligent shutdown.
NO
No
NO
No
Indicates the threshold for triggering inter-RAT load balancing. Load balancing between the cell and its inter-RAT neighboring cell is triggered if the cell load exceeds the sum of this threshold and the offset, and is NO stopped if the cell load falls below this threshold.The sum of this threshold and the load offset must be greater than the sum of the UL/DL PRB usage threshold and UL/DL PRB offset for cell intelligent shutdown.
NO
No
Indicates the period of the inter-cell load exchange. This parameter is contained in the load exchange request message. If the source cell sends a load exchange request message containing a period, the target cell reports its load to the source cell at intervals based on the period. If the source cell sends NO such a message without a period, the target cell reports its load to the source cell at a default interval of 5s. In this version, the parameter still supports setting synchronization between the M2000 and the eNodeB, but is no longer used internally. Avoid using this parameter as it will be removed from Indicates the offset used in the evaluation of whether to trigger load balancing. To prevent load fluctuations from frequently triggering or stopping load balancing, an offset NO needs to be set. That is, a specific load balancing action is taken only if the cell load exceeds the sum of the corresponding load balancing threshold and this offset.
NO
No
NO
No
Indicates the threshold of load difference between two cells for load balancing. If the load difference between cells exceeds this threshold, the eNodeB determines that load imbalance occurs and therefore initiates NO load balancing between the cells. If the load difference between cells falls below this threshold, the eNodeB determines that load imbalance is resolved and therefore stops load balancing between the cells. Indicates the local ID of the cell. It YES uniquely identifies a cell within a BS. Indicates the CCE aggregation level for common signaling. NO
NO
No
YES
No
None
NO
No
LBFD-001001 / TDLBFD-001001
Indicates the CCE ratio adjustment switch for the PDCCH. If this switch is turned on, the resource allocation algorithm of the PDCCH dynamically adjusts the UL and DL CCE NO ratios within each transmission time interval (TTI) based on CCE usages in UL and DL. If this switch is turned off, the UL and DL CCE ratios are not dynamically adjusted.
NO
No
LBFD-001001 / TDLBFD-001001 TDLOFD-009004
Indicates the number of OFDM symbols initially occupied by the PDCCH. If the switch for dynamic adjustment to the number of OFDM symbols occupied by the PDCCH is turned off, this parameter indicates the number of OFDM symbols that are always occupied by the PDCCH. NO If the switch for dynamic adjustment to the number of OFDM symbols occupied by the PDCCH is turned on, the number of OFDM symbols occupied by the PDCCH is always 4 and 3 for the bandwidths of 1.4 MHz and 3 MHz, respectively, and therefore the parameter setting is invalid. For the Indicates the virtual CCE ratio for the PDCCH. Based on the observed impact of different virtual CCE ratios on NO PDCCH demodulation performance, the intra-frequency LTE networking can be optimized.
NO
No
LBFD-001001 / TDLBFD-001001
NO
No
LBFD-001001 / TDLBFD-001001
Indicates the switch that is used to control whether to enable and disable dynamic adjustment NO on the number of OFDM symbols occupied by PDCCH.
NO
No
LBFD-001001 / TDLBFD-001001
Indicates the upper limit for the CCE usage within each TTI. Note that this parameter stops taking effect if the switch for NO dynamically adjusting the number of OFDM symbols on the PDCCH is turned on.
NO
No
LBFD-001001 / TDLBFD-001001 TDLOFD-009005
Indicates the switch used to enable or disable closed-loop adjustment to the PDCCH aggregation level. If this switch is turned on, PDCCH aggregation level is adjusted based on NO the block error rate (BLER) of the PDCCH. If this switch is turned off, PDCCH aggregation level is not adjusted based on the BLER of the PDCCH.
NO
No
LBFD-001001 / TDLBFD-001001
YES
No
None
Indicates the threshold for the low load state of the SRI resources. The SRI resources enter the low load state if the PUCCH NO resource allocation algorithm detects that the number of admitted UEs is smaller than the value of this parameter.
NO
No
None
YES
No
LOFD-002010
Indicates the time when the cell notraffic detection starts. If the stop time is earlier than or the same as the start time, the end time is assumed to be a time of the next day. If the timer for reporting the no-traffic alarm is not set to 0, the eNodeB performs the cell no-traffic detection from the start time to the stop time. Indicates the time when the cell notraffic detection stops. If the stop time is earlier than or the same as the start time, the stop time is assumed to be a time of the next day. If the timer for reporting the no-traffic alarm is not set to 0, the eNodeB performs the cell no-traffic detection from the start time to the stop time.
NO
NO
No
LOFD-002010
NO
NO
No
LOFD-002010
Indicates the length of the timer for the cell no-traffic detection. If there is no traffic in the cell within the duration specified by this parameter, the eNodeB reports the no-access alarm and resets the cell. If this parameter is NO set to 0, the cell notraffic detection is not performed. If the timer for reporting the no-traffic alarm is set to a non-zero value, the eNodeB performs the cell notraffic detection from the start time to the stop time. Indicates the local ID of the cell. It YES uniquely identifies a cell within a BS.
NO
No
LOFD-002010
YES
No
None
Indicates the band division scheme used in uplink ICIC. The band division in the cell is changed according to the NO setting of this parameter so that the edge bands do not overlap between neighboring cells.
NO
No
YES
No
None
Indicates the index of a simulated load configuration. The value of this parameter corresponds to SimuLoadCfgIndex in a SimuLoad MO. That is, each index NO corresponds to a specific set of parameters that consistitute one of the multiple simulated load configurations stored in the eNodeB. Indicates the transmission mode adopted by a NO simulated load configuration. Indicates the number of RBs allocated by a simulated load configuration.
NO
No
None
NO
No
None
NO
NO
Yes
None
Indicates the number of RBs for NO commercial services in the cell. Indicates the power allocated by a NO simulated load configuration. Indicates the power for commercial NO services in the cell.
NO
Yes
None
NO
Yes
None
NO
Yes
None
Indicates the number of UEs allocated by a simulated load configuration.
NO
NO
Yes
None
Indicates the number of commercial service UEs, that is, the NO number of UEs that are actually served by the cell. Indicates the local ID of the cell. It YES uniquely identifies a cell within a BS.
NO
Yes
None
YES
No
LBFD-001001 / TDLBFD-001001
Indicates the modification period coefficient for the BCCH. BCCH modification period = Modification period coefficient x Default paging cycle, where the NO BCCH modification period and default paging cycle are measured in unit of radio frames, and the modification period coefficient is specified by this parameter.
NO
No
LBFD-002009
YES
No
None
Indicates the offset of the PCFICH transmit power NO relative to the reference signal power.
NO
No
Indicates the offset of the PBCH transmit power NO relative to the reference signal power.
NO
No
Indicates the offset of the transmit power for the cell synchronization NO signals relative to the reference signal power.
NO
No
Indicates the offset of the transmit power for broadcast information on the NO PDSCH channel relative to the reference signal power. Indicates the offset of the transmit power for the paging information NO on the PDSCH channel relative to the reference signal power. Indicates the offset of the transmit power for the random access responses on the NO PDSCH channel relative to the reference signal power. Indicates the offset of the pilot power relative to the NO reference signal power. Indicates the local ID of the cell. It YES uniquely identifies a cell within a BS.
NO
No
LBFD-002003 / TDLBFD-002003 LBFD-002009 / TDLBFD-002009 LBFD-002016 / TDLBFD-002016 LBFD-002003 / TDLBFD-002003 LBFD-002009 / TDLBFD-002009 LBFD-002011 / TDLBFD-002011 LBFD-002016 / TDLBFD-002016 LBFD-002003 / TDLBFD-002003 LBFD-002009 / TDLBFD-002009 LBFD-002010 / TDLBFD-002010 LBFD-002016 / TDLBFD-002016
NO
No
NO
No
NO
No
None
YES
No
None
Indicates the reference signal power of the cell. For details, see 3GPP TS 36.213.
NO
NO
No
Indicates the scaling factor index of the Energy Per Resource Element (EPRE) on the PDSCH. This scaling factor is NO determined by the value of this parameter and the antenna port. For details, see 3GPP TS 36.213.
NO
No
Indicates the local ID of the cell. It YES uniquely identifies a cell within a BS. Indicates the step by which the TX power for random access preambles is increased each time after a RACH access failure. If multiple attempts to access the PRACH fail, the UE increases the TX NO power for random access preambles by a step specified by this parameter each time after an access failure to ensure successful access. For details, see 3GPP TS 36.321.
YES
No
LBFD-001001 / TDLBFD-001001
NO
No
LBFD-001001
Indicates the target UE transmit power for the PRACH expected by the eNodeB when PRACH preamble format 0 is applied NO on condition that requirements for preamble detection performance are met. For details, see 3GPP TS 36.321.
NO
No
LBFD-001001
Indicates the threshold for determining the size of Msg3 when a UE selects a preamble from random NO access preamble group A during a random access procedure. For details, see 3GPP TS 36.321.
NO
No
LBFD-001001 / TDLBFD-001001 LBFD-002002
Indicates the offset to the starting position of each NO PRACH in the frequency domain of the FDD cell.
NO
No
LBFD-001001 / TDLBFD-001001
Indicates whether to configure the PRACH NO configuration index of the FDD cell.
NO
No
LBFD-001001 / TDLBFD-001001
Indicates the PRACH NO configuration index of the FDD cell.
NO
No
LBFD-001001 / TDLBFD-001001
YES
No
LBFD-001001 / TDLBFD-001001
Indicates the index of the SRS subframe configuration for the cell. The value SCn, where n is variable, represents configuration n. For example, the value SC0 indicates subframe configuration 0, and the value SC1 indicates subframe configuration 1. If the cell operates in NO FDD mode, the value SC15 is reserved. If the cell operates in TDD mode, the values SC14 and SC15 are reserved. The reserved values cannot be used. For the relationship between the subframe configuration index and the cell-specific subframe cycle/offset, see 3GPP TS 36.211. In
NO
No
Indicates whether the sounding reference signal (SRS) of a UE and the ACK/NACK or scheduling request (SR) on the PUCCH are allowed to use the same time resources for simultaneous transmission. If this parameter is set to BOOLEAN_FALSE, simultaneous transmission is not NO allowed. In this situation, the UE discards the SRS and only transmits the ACK/NACK or SR on the PUCCH. If this parameter is set to BOOLEAN_TRUE, simultaneous transmission is allowed. In this situation, the UE transmits truncated ACK/NACK or SR. For details, see 3GPP TS 36.211.
NO
No
LBFD-001001 LBFD-002003
Indicates whether a cell has available SRS resources. If this parameter is set to BOOLEAN_TRUE, the cell has available SRS resources for its UEs. If this parameter is set to BOOLEAN_FALSE, NO the cell has no SRS resources for its UEs. This parameter applies only to cells established on an LBBPd. If cells are established on an LBBPc, the cell has available SRS resources for its UEs by default.
NO
No
Indicates the TDD SRS configuration to be used. If this parameter is set to EXPERIENCE_FIR ST, the TDD SRS configuration that is designed to preferentially guarantee user experience (for example, beamforming performance) is used. If this NO parameter is set to ACCESS_FIRST, the TDD SRS configuration that is designed to preferentially guarantee the specifications (for example, accessed UEs and CAPs) is used. CAP is short for call attempt per second. This parameter is valid only in TDD mode.
NO
No
Indicates the cellspecific SRS bandwidth. For details, see 3GPP TS 36.211.
NO
NO
Yes
YES
No
None
Indicates the type of the PHICH duration. If this parameter is set to NORMAL, the number of OFDM symbols occupied by the PDCCH can be adaptively adjusted. If this parameter is set to EXTENDED for a cell with a 1.4 MHz bandwidth, the number of OFDM symbols occupied NO by the PDCCH can be 3 or 4. If this parameter is set to EXTENDED for a cell with another bandwidth, the number of OFDM symbols occupied by the PDCCH is 3. For the mapping between the type and the duration, see 3GPP TS 36.211.
NO
No
Indicates a coefficient that is used to calculate the resources used by the PHICH for the cell. It corresponds to the NO Ng parameter in the protocol. For details on the usage of the Ng parameter, see 3GPP TS 36.211.
NO
No
YES
No
None
Indicates the default paging period for the cell. It is also called the discontinuous reception (DRX) period. If the EPC specifies a DRX period for a UE, the UE compares this period with the value of this parameter and uses NO the smaller one as its DRX period. If the EPC does not specify a DRX period, the UE uses the value of this parameter, which is delivered in the system information, as its DRX period. For details, see 3GPP TS 36.304.
NO
No
Indicates the number of paging occasions (subframes or times of paging) NO contained in a paging cycle. For details, see 3GPP TS 36.304.
NO
No
YES
No
None
Indicates the number of PUSCH sub-bands. For details, see 3GPP TS 36.211.
NO
NO
No
Indicates the hopping mode of the PUSCH. For details, see 3GPP TS 36.211.
NO
NO
No
Indicates the hopping offset of the PUSCH. For details, see 3GPP TS 36.211.
NO
NO
No
Indicates whether group hopping of the PUSCH is enabled. For details, see 3GPP TS 36.211.
NO
NO
No
Indicates the group assignment of the PUSCH. NO For details, see 3GPP TS 36.211.
NO
No
Indicates whether sequence hopping of the PUSCH is enabled. For details, see 3GPP TS 36.211.
NO
NO
No
Indicates the cyclic shift of the PUSCH. NO For details, see 3GPP TS 36.211.
NO
No
Indicates whether 64QAM of the PUSCH is enabled. NO For details, see 3GPP TS 36.211. Indicates the local ID of the cell. It YES uniquely identifies a cell within a BS. Indicates the cyclic shift interval of the PUCCH. The cyclic shift interval of the PUCCH can be acquired based on the average delay spread of the cell, and the average delay spread is acquired based on the networking environment. The parameter value DS1_DELTA_SHIF T is not supported NO by the LBBPc. As a result, if the cell is established on an LBBPc but this parameter is set to DS1_DELTA_SHIF T, the value of this parameter will be automatically changed to DS2_DELTA_SHIF T when put into effect. For details, see 3GPP TS 36.211.
NO
No
LOFD-001006 / TDLOFD-001006
YES
No
LBFD-001001 / TDLBFD-001001
NO
No
Indicates the number of resource indexes allocated to SRIs and semipersistent ACKs at NO the RRC layer for the FDD cell. If this parameter is set to 0, UEs may fail to access the cell.
NO
No
Indicates the number of RBs allocated to the CQIs at the RRC layer of FDD cell.
NO
NO
No
Indicates the cell global ID of the external CDMA2000 cell. It uniquely identifies a CDMA2000 cell around the globe. For details, see the CellGlobalIdCDMA2 000 IE defined in section 6.3.4 of 3GPP TS 36.331. The cell global ID (CGI) of an external CDMA2000 HRPD cell is 128 bits or 32 hexadecimal digits YES in length. A 16 decimal-digit CGI is still synchronized between the M2000 and the eNodeB in the current version, but is incompatible with the protocol and will be removed from later versions. Therefore, avoid using 16 decimaldigit CGIs. In the new configuration of a 32 hexadecimaldigit CGI, if the 16 hexadecimal digits
YES
No
Indicates the mobile country code of the external CDMA2000 cell that is shared among multiple operators. A PLMN ID is comprised of an MCC and an MNC. YES The MCC consists of three digits. The MNC consists of two to three digits. For example, if the MCC is 123 and the MNC is 45, then the PLMN ID is 12345. Indicates the mobile network code of the external CDMA2000 cell that is shared among multiple operators. A PLMN ID is comprised of an MCC and an MNC. YES The MCC consists of three digits. The MNC consists of two to three digits. For example, if the MCC is 123 and the MNC is 45, then the PLMN ID is 12345.
YES
No
YES
No
Indicates the cell ID of the local cell. It uniquely identifies a YES cell within an eNodeB.
YES
No
None
Indicates the cell global ID of the neighboring CDMA2000 HRPD cell. It uniquely identifies a CDMA2000 HRPD cell around the globe. For details, see the CellGlobalIdCDMA2 000 IE defined in section 6.3.4 of 3GPP TS 36.331. The cell global ID (CGI) of an external CDMA2000 HRPD YES cell is 128 bits or 32 hexadecimal digits in length. A 16 decimal-digit CGI is still synchronized between the M2000 and the eNodeB in the current version, but is incompatible with the protocol and will be removed from later versions. Therefore, avoid using 16 decimaldigit CGIs. In the new configuration of a 32 hexadecimal-
YES
No
LOFD-001021
Indicates whether handovers of UEs to the associated NO neighboring cell are prohibited.
NO
No
LOFD-001021 LOFD-002002
Indicates whether to permit or prohibit removal of the NO neighboring relationship by ANR.
NO
No
LOFD-002001 / TDLOFD-002001 LOFD-002002
Indicates the priority of the neighboring cell during blind handovers. Blind handover is a process in which the eNodeB instructs a UE to hand over to a specified neighboring cell without NO measurements. There are 32 priorities altogether. The priority has a positive correlation with the value of this parameter. Note that the value 0 indicates that blind handovers to the neighboring cell are prohibited. Indicates whether this neighboring cell is automatically NO discovered by the ANR algorithm.
NO
No
LBFD-002018 / TDLBFD-002018
NO
No
LOFD-002001 / TDLOFD-002001 LOFD-002002
Indicates the name NO of the local cell.
NO
No
LOFD-002001 / TDLOFD-002001 LOFD-002002
Indicates the name of the neighboring NO CDMA2000 HRPD cell.
NO
No
LOFD-002001 / TDLOFD-002001 LOFD-002002
YES
No
None
Indicates the neighboring CDMA2000 band class. Signals on a frequency within the band class can be YES obtained by UEs. For details, see the BandclassCDMA20 00 IE defined in 3GPP 36.331 6.3.4. Indicates the neighboring CDMA2000 frequency of the serving cell. For YES details, see the IE CDMA2000CarrierInfo in the 3GPP 36.331 6.3.4 protocol.
YES
No
LOFD-001021 LBFD-00201803 / TDLBFD-00201803 LOFD-002002
YES
No
Indicates the frequency-specific offset of the local cell to the neighboring CDMA2000 cell on the frequency. A larger value of this parameter leads to NO a higher probability of triggering measurement reports. For details, see the QOffsetRangeInterR AT IE defined in 3GPP 36.331 6.3.4.
NO
No
LOFD-001021 LOFD-002002
Indicates whether to set the size of the CDMA2000 search window. If this NO parameter is set to NOT_CFG, the default size (8) is used.
NO
No
LBFD-001001 / TDLBFD-001001 LOFD-001021
Indicates the size of the CDMA2000 search window. UEs search for pilots for neighboring CDMA2000 cells within the time NO period specified by this parameter. For details, see the MeasObjectCDMA2 000 IE defined in 3GPP TS 36.331. Indicates the mobile country code of the external cell. A PLMN ID is comprised of an MCC and an MNC. The MCC consists of three digits. YES The MNC consists of two to three digits. For example, if the MCC is 123 and the MNC is 45, then the PLMN ID is 12345. Indicates the mobile network code of the external cell. A PLMN ID is comprised of an MCC and an MNC. The MCC consists of three digits. YES The MNC consists of two to three digits. For example, if the MCC is 123 and the MNC is 45, then the PLMN ID is 12345.
NO
No
LBFD-001001 LOFD-001021
YES
No
YES
No
Indicates the eNodeB identity of the external EUTRAN cell. It uniquely identifies an eNodeB within a PLMN. The 28-bit EUTRAN cell identity is comprised of the cell identity and the eNodeB identity YES (represented by the most significant 20 bits). The cell global identity (CGI) of an E-UTRAN cell is comprised of the EUTRAN cell identity and the PLMN ID. For details, see 3GPP TS 36.413. Indicates the cell identity of the external E-UTRAN cell. It uniquely identifies a cell within an eNodeB. The 28-bit EUTRAN cell identity is comprised of the cell identity (represented by the YES least significant eight bits) and the eNodeB identity. The cell global identity (CGI) of an E-UTRAN cell is comprised of the EUTRAN cell identity and the PLMN ID. For details, see 3GPP TS 36.413.
YES
No
LOFD-001036 LOFD-001037
YES
No
LOFD-001036 LOFD-001037
Indicates the mobile country code of the external E-UTRAN cell that is shared among multiple operators. A PLMN ID is comprised of an MCC and an MNC. YES The MCC consists of three digits. The MNC consists of two to three digits. For example, if the MCC is 123 and the MNC is 45, then the PLMN ID is 12345. Indicates the mobile network code of the external E-UTRAN cell that is shared among multiple operators. A PLMN ID is comprised of an MCC and an MNC. YES The MCC consists of three digits. The MNC consists of two to three digits. For example, if the MCC is 123 and the MNC is 45, then the PLMN ID is 12345.
YES
No
YES
No
Indicates the identity of the external GERAN YES cell. It uniquely identifies a GERAN cell within a PLMN.
YES
No
Indicates the LAC of the external YES GERAN cell.
YES
No
Indicates the mobile country code of the external cell. A PLMN ID is comprised of an MCC and an MNC. The MCC consists of three digits. YES The MNC consists of two to three digits. For example, if the MCC is 123 and the MNC is 45, then the PLMN ID is 12345. Indicates the mobile network code of the external cell. A PLMN ID is comprised of an MCC and an MNC. The MCC consists of three digits. YES The MNC consists of two to three digits. For example, if the MCC is 123 and the MNC is 45, then the PLMN ID is 12345.
YES
No
YES
No
Indicates the mobile country code of the external GERAN cell that is shared among multiple operators. A PLMN ID is comprised of an MCC and an MNC. YES The MCC consists of three digits. The MNC consists of two to three digits. For example, if the MCC is 123 and the MNC is 45, then the PLMN ID is 12345. Indicates the mobile network code of the external GERAN cell that is shared among multiple operators. A PLMN ID is comprised of an MCC and an MNC. YES The MCC consists of three digits. The MNC consists of two to three digits. For example, if the MCC is 123 and the MNC is 45, then the PLMN ID is 12345.
YES
No
YES
No
Indicates the ID of the external UTRAN cell. It uniquelly identifies a cell in a PLMN. The 28-bit ID of the external UTRAN cell consists of a 12-bit RNC ID (indicated by RncId) and a 16bit RNC cell ID YES (indicated by RncCellId). The formula for calculating the ID of the external UTRAN cell is as follows: External UTRAN cell ID = RNC ID x 65536 + RNC cell ID. Indicates the mobile country code of the external UTRAN cell. A PLMN ID is comprised of an MCC and an MNC. The MCC consists YES of three digits. The MNC consists of two to three digits. For example, if the MCC is 123 and the MNC is 45, then the PLMN ID is 12345. Indicates the mobile network code of the external UTRAN cell. A PLMN ID is comprised of an MCC and an MNC. The MCC consists YES of three digits. The MNC consists of two to three digits. For example, if the MCC is 123 and the MNC is 45, then the PLMN ID is 12345.
YES
No
YES
No
YES
No
Indicates the mobile country code of the external UTRAN cell that is shared among multiple operators. A PLMN ID is comprised of an MCC and an MNC. YES The MCC consists of three digits. The MNC consists of two to three digits. For example, if the MCC is 123 and the MNC is 45, then the PLMN ID is 12345. Indicates the mobile network code of the external UTRAN cell that is shared among multiple operators. A PLMN ID is comprised of an MCC and an MNC. YES The MCC consists of three digits. The MNC consists of two to three digits. For example, if the MCC is 123 and the MNC is 45, then the PLMN ID is 12345.
YES
No
YES
No
Indicates the cell global ID of the external CDMA2000 cell. It uniquely identifies a CDMA2000 cell around the globe. For details, see the CellGlobalIdCDMA2 000 IE defined in section 6.3.4 of 3GPP TS 36.331. The cell global ID (CGI) of an external CDMA2000 HRPD cell is 128 bits or 32 hexadecimal digits YES in length. A 16 decimal-digit CGI is still synchronized between the M2000 and the eNodeB in the current version, but is incompatible with the protocol and will be removed from later versions. Therefore, avoid using 16 decimaldigit CGIs. In the new configuration of a 32 hexadecimaldigit CGI, if the 16 hexadecimal digits Indicates the band class on which the external CDMA2000 NO cell operates. For details, see 3GPP TS 36.331.
YES
No
LOFD-001021
YES
No
Indicates the frequency on which the external CDMA2000 cell NO operates. For details, see 3GPP TS 36.331.
YES
No
Indicates the scrambling code, which is used as the physical cell NO identifier of the external CDMA2000 cell. Indicates the type of the external CDMA2000 cell. By default, the cell is a CDMA2000 HRPD cell. Note that the cell global identity of a NO CDMA2000 1xRTT cell consists of 6 decimal digits, and that of a CDMA2000 HRPD cell consists of 16 decimal digits. Indicates the mobile country code of the external cell. A PLMN ID is comprised of an MCC and an MNC. The MCC consists of three digits. NO The MNC consists of two to three digits. For example, if the MCC is 123 and the MNC is 45, then the PLMN ID is 12345.
YES
No
LBFD-001001 / TDLBFD-001001 LOFD-001021 LBFD-00201803 / TDLBFD-00201803
NO
No
LOFD-001021 LBFD-00201803
YES
No
Indicates the mobile network code of the external cell. A PLMN ID is comprised of an MCC and an MNC. The MCC consists of three digits. NO The MNC consists of two to three digits. For example, if the MCC is 123 and the MNC is 45, then the PLMN ID is 12345.
YES
No
Indicates the name of the external NO CDMA2000 cell.
NO
No
YES
No
None
Indicates the cell global ID of the neighboring CDMA2000 1xRTT cell. It uniquely identifies a CDMA2000 1xRTT cell around the globe. For details, see the CellGlobalIdCDMA2 000 IE defined in section 6.3.4 of 3GPP TS 36.331. The cell global ID (CGI) of an external CDMA2000 1xRTT YES cell is 47 bits or 12 hexadecimal digits in length. A 12 hexadecimal-digit CGI is converted from a string of binary digits, from the left of which the BASEID occupies bits 1 to 16, the SID occupies bits 17 to 31, the NID occupies bits 32 to 47, and 0 always occupies bit 48. If the length of the BASEID, SID, and
YES
No
LOFD-001021
Indicates whether handovers of UEs to the associated NO neighboring cell are prohibited.
NO
No
LOFD-001021 LOFD-002002
NO
No
LOFD-002001 / TDLOFD-002001 LOFD-002002
Indicates the priority of the neighboring cell during blind handovers. Blind handover is a process in which the eNodeB instructs a UE to hand over to a specified neighboring cell without NO measurements. There are 32 priorities altogether. The priority has a positive correlation with the value of this parameter. Note that the value 0 indicates that blind handovers to the neighboring cell are prohibited. Indicates whether this neighboring cell is automatically NO discovered by the ANR algorithm.
NO
No
LBFD-002018 / TDLBFD-002018
NO
No
LOFD-002001 / TDLOFD-002001 LOFD-002002
NO
No
LOFD-002001 / TDLOFD-002001 LOFD-002002
Indicates the name of the neighboring NO cell.
NO
No
LOFD-002001 / TDLOFD-002001 LOFD-002002
YES
No
None
Indicates the neighboring CDMA2000 band class. Signals on a frequency within the band class can be YES obtained by UEs. For details, see the BandclassCDMA20 00 IE defined in 3GPP 36.331. Indicates the absolute priority of the CDMA2000 band class to be used during cell reselection. The value 0 indicates the lowest priority. Frequencies used for different RATs must be assigned different cell reselection priorities. The information is contained in SIB8. For details, see 3GPP TS 36.331.
YES
No
NO
NO
No
LOFD-001021 LBFD-00201803 / TDLBFD-00201803
Indicates the minimum RX level required for a neighboring cell on a frequency in the CDMA2000 band class to become a candidate for reselection if the priority of the frequency is higher than that of the serving frequency. After measurements NO are started for neighboring cells on a frequency in the band class, the UE reselects to a neighboring cell only if the RX level of the cell is higher than the value specified by this parameter for a timeto-trigger. For details, see 3GPP TS 36.304 5.2.4.5.
NO
No
LBFD-00201803
Indicates the minimum RX level required for a neighboring cell on a frequency in the CDMA2000 band class to become a candidate for reselection if the priority of the frequency is lower than that of the serving frequency. After measurements are started for neighboring cells on NO a frequency in the band class, the UE reselects to a cell on the frequency only if the RX level of the serving cell is lower than a specified threshold and that of the cell is higher than the value specified by this parameter for a time-to-trigger. For details, see 3GPP TS 36.304 5.2.4.5. Indicates the mobile country code of the external cell. The PLMN consists of the MCC and the MNC. The MCC consists YES of three digits. The MNC consists of two to three digits. For example, MCC = 123, MNC = 45, PLMN = 12345.
NO
No
LBFD-00201803
YES
No
LOFD-001020 / TDLOFD-001020
Indicates the mobile network code of the external cell. The PLMN consists of the MCC and the MNC. The MCC consists YES of three digits. The MNC consists of two to three digits. For example, MCC = 123, MNC = 45, PLMN = 12345. Indicates the cell ID of the external GERAN cell. It uniquely identifies a GERAN cell within the area specified YES by the location area identity (LAI). An LAI consists of the MCC, MNC, and LAC.
YES
No
LOFD-001020 / TDLOFD-001020
YES
No
LOFD-001020 / TDLOFD-001020
Indicates the LAC of the external GERAN cell. It YES uniquely identifies a location within a PLMN.
YES
No
LOFD-001020 / TDLOFD-001020
Indicates whether to set the routing area code (RAC) of the external GERAN cell. This parameter NO is required if the external GERAN cell supports packet switched (PS) services.
NO
No
LOFD-001020
Indicates the routing NO area code.
NO
No
LOFD-001020 / TDLOFD-001020
Indicates the GERAN band indicator. If the GERAN ARFCN is a value in the range of 512 to 810, the value of this parameter is used NO to indicate whether the GERAN frequency is in the 1800MHz band or the 1900MHz band. For details, see 3GPP TS 36.331.
YES
No
Indicates the GERAN BCCH ARFCN. For details, NO see 3GPP TS 45.005.
YES
No
LOFD-001020
Indicates the network color code (NCC) of GERAN. It is operator-specific and identifies a network within the whole country. The base NO transceiver station identity code (BSIC) consists of the NCC and the base station color code (BCC). For details, see 3GPP TS 23.003.
YES
No
LOFD-001020
Indicates the base station color code (BCC) of the external GERAN cell. The base transceiver station NO identity code (BSIC) consists of the BCC and the network color code (NCC). For details, see 3GPP TS 23.003. Indicates whether the cell supports the dual transmission mode. If the cell supports the dual transmission mode, both CS and PS NO services can be handed over to the cell. Otherwise, only the CS service or the PS service can be handed over to the cell.
YES
No
LOFD-001020
NO
No
Indicates the name of the external NO GERAN cell.
NO
No
LOFD-001020 / TDLOFD-001020
Indicates whether the external GERAN cell supports single radio voice call continuity (SRVCC) for both CS and PS NO services. If this parameter is set to BOOLEAN_FALSE, the cell supports only SRVCC for CS services.
NO
No
YES
No
None
Indicates the mobile country code of the neighboring GERAN cell. The PLMN consists of the MCC and the MNC. The MCC consists YES of three digits. The MNC consists of two to three digits. For example, MCC = 123, MNC = 45, PLMN = 12345. Indicates the mobile network code of the neighboring GERAN cell. The PLMN consists of the MCC and the MNC. The MCC consists YES of three digits. The MNC consists of two to three digits. For example, MCC = 123, MNC = 45, PLMN = 12345.
YES
No
LOFD-001020 / TDLOFD-001020
YES
No
LOFD-001020 / TDLOFD-001020
Indicates the LAC of the GERAN neighboring cell. It YES uniquely identifies a location within a PLMN.
YES
No
LOFD-001020 / TDLOFD-001020
Indicates the cell ID of the GERAN neighboring cell. It uniquely identifies a GERAN cell within the area specified YES by the location area identity (LAI). An LAI consists of the MCC, MNC, and LAC. Indicates whether to permit or prohibit removal of the NO neighboring relationship by ANR. Indicates whether handovers of UEs to the neighboring cell are prohibited.
YES
No
LOFD-001020 / TDLOFD-001020
NO
No
LOFD-002001 / TDLOFD-002001 LOFD-002002
NO
NO
No
LOFD-002002
Indicates the priority of the neighboring cell during blind handovers. Blind handover is a process in which the eNodeB instructs a UE to hand over to a specified neighboring cell. NO There are 32 priorities altogether. The priority has a positive correlation with the value of this parameter. Note that the value 0 indicates that blind handovers to the neighboring cell are not allowed.
NO
No
LBFD-002018 / TDLBFD-002018
Indicates whether this neighboring cell is automatically NO discovered by the ANR algorithm.
NO
No
LOFD-002001 / TDLOFD-002001 LOFD-002002
NO
No
LOFD-002001 LOFD-002002
Indicates the name of the GERAN NO neighboring cell.
NO
No
LOFD-002001 / TDLOFD-002001 LOFD-002002
Indicates the ID of the eNodeB, which uniquely identifies NO an eNodeB within a PLMN. Indicates the start time of the latest RIM procedure towards the neighboring GERAN cell.
NO
Yes
LOFD-001053 / TDLOFD-001053
NO
NO
Yes
LOFD-001053 / TDLOFD-001053
Indicates the time of the latest RIM request received by NO the neighboring GERAN cell.
NO
Yes
LOFD-001053 / TDLOFD-001053
YES
No
None
Indicates a GERAN carrier frequency group. In the cell reselection procedure, the GERAN carrier frequencies are YES organized in groups and the cell reselection parameters are provided per group of GERAN carrier frequencies.
YES
No
LOFD-001020 / TDLOFD-001020 LOFD-002002
Indicates the standard that is supported by the current carrier frequency group.
NO
YES
No
LOFD-001020 / TDLOFD-001020
Indicates the first ARFCN value in the GERAN carrier NO frequency group. For details, see 3GPP TS 36.331.
YES
No
LOFD-001020 / TDLOFD-001020 LBFD-00201803 / TDLBFD-00201803
Indicates the GERAN band indicator. If the GERAN ARFCN is a value in the range of 512 to 810, the value of this parameter is used NO to indicate whether the GERAN frequency is in the 1800MHz band or the 1900MHz band. For details, see 3GPP TS 36.331. Indicates whether to set the reselection priority of the frequencies in the GERAN carrier frequency group. If the value of this NO parameter is not specified, the UE does not reselect to neighboring cells on the frequencies in the GERAN carrier frequency group.
YES
No
LOFD-001020
NO
No
LBFD-00201803 / TDLBFD-00201803
Indicates the cell reselection priority of the GERAN carrier frequency group. It is contained in system information block type 7 (SIB7). The UE decides whether to reselect a neighboring cell on a frequency in the GERAN carrier frequency group based on the value of this parameter and the absolute NO priority of the serving cell. If the value of this parameter is larger than the absolute priority of the serving cell, the UE starts measurements on neighboring cells on the frequencies in the GERAN carrier frequency group; then if the signal quality of some neighboring cells meets the related Indicates whether to set the maximum power that the UE can apply to transmission on a frequency in the GERAN carrier NO frequency group. It is used in criteria S to calculate the compensated power. For details, see 3GPP TS 36.104.
NO
No
LBFD-00201803
NO
No
LBFD-00201803
Indicates the maximum power that the UE can apply to transmission on a frequency in the GERAN carrier frequency group. For details, see 3GPP TS 36.331.
NO
NO
No
LBFD-00201803
Indicates the RX level required for a neighboring cell on a frequency in the GERAN carrier frequency group to become a candidate for selection. It is included in criteria S and used in the evaluation for cell selection. During the evaluation for cell reselection, the UE performs the following calculation: Srxlev = NO Measured RSSI value of a neighboring cell on a frequency in the GERAN carrier frequency group Value of this parameter Compensated power. If Srxlev for a neighboring cell is better than a threshold for a timeto-trigger, reselection to the cell is started. For details, see 3GPP
NO
No
LBFD-00201803
Indicates the RX level required for a neighboring cell on a frequency in the GERAN carrier frequency group to become a candidate for reselection if the priority of the frequency is higher than that of the serving frequency. After measurements are started for NO neighboring cells on a frequency in the GERAN carrier frequency group, the UE reselects to a cell on the frequency only if the RX level of the cell is better than the value specified by this parameter for a time-to-trigger. For details, see 3GPP TS 36.104.
NO
No
LBFD-00201803
Indicates the RX level required for a neighboring cell on a frequency in the GERAN carrier frequency group to become a candidate for reselection if the priority of the frequency is lower than that of the serving frequency. After measurements are started for neighboring cells on a frequency in the NO GERAN carrier frequency group, the UE reselects to a cell on the frequency only if the RX level of the serving cell is lower than a specified threshold and that of the cell is better than the value specified by this parameter for a timeto-trigger. For details, see 3GPP TS 36.104.
NO
No
LBFD-00201803
Indicates the frequency specific offset of the group of neighboring GERAN carrier frequencies. This parameter is used NO in the decision of the UE to send measurement reports for interRAT handovers. For details, see 3GPP TS 36.331.
NO
No
LOFD-001020 / TDLOFD-001020 LOFD-002002
Indicates whether a BCCH carrier with the specific NCC is permitted for NO monitoring. For details, see 3GPP TS 36.331.
NO
No
LBFD-00201803 / TDLBFD-00201803
YES
No
None
Indicates the index of the BCCH carrier frequency group. It YES identifies a BCCH carrier frequency group.
YES
No
Indicates the GERAN BCCH ARFCN. For details, YES see 3GPP TS 45.005.
YES
No
LBFD-002009 LOFD-002002
YES
No
None
Indicates the starting physical cell ID of the intrafrequency YES blacklisted cell. For details, see 3GPP TS 36.331.
YES
No
Indicates the name of the intraNO frequency blacklisted cell.
NO
No
Indicates the physical cell ID range of the intrafrequency NO blacklisted cell. For details, see 3GPP TS 36.331.
NO
No
YES
No
None
Indicates the mobile country code of the E-UTRAN neighboring cell. The PLMN consists of the MCC and the MNC. The MCC consists YES of three digits. The MNC consists of two to three digits. For example, MCC = 123, MNC = 45, PLMN = 12345. Indicates the mobile network code of the E-UTRAN neighboring cell. The PLMN consists of the MCC and the MNC. The MCC consists YES of three digits. The MNC consists of two to three digits. For example, MCC = 123, MNC = 45, PLMN = 12345.
YES
No
LBFD-00201801 / TDLBFD-00201801
YES
No
LBFD-00201801 / TDLBFD-00201801
Indicates the eNodeB identity of the intra-frequency neighboring cell. It uniquely identifies an eNodeB within a PLMN. The 28-bit EUTRAN cell identity is comprised of the cell identity and the eNodeB identity YES (represented by the most significant 20 bits). The cell global identity (CGI) of an E-UTRAN cell is comprised of the EUTRAN cell identity and the PLMN ID. For details, see 3GPP TS 36.413. Indicates the local identity of the intrafrequency neighboring cell. It uniquely identifies a cell within an eNodeB. The 28-bit E-UTRAN cell identity is comprised of the cell identity (represented by the YES least significant eight bits) and the eNodeB identity. The cell global identity (CGI) of an E-UTRAN cell is comprised of the EUTRAN cell identity and the PLMN ID. For details, see 3GPP TS 36.413.
YES
No
LBFD-00201801 / TDLBFD-00201801
YES
No
LBFD-00201801 / TDLBFD-00201801
Indicates the cell individual offset for the intra-frequency neighboring cell, which is used in evaluation for handovers. It affects the probability of NO triggering intrafrequency measurement reports. A larger value of this parameter indicates a higher probability. For details, see 3GPP TS 36.331.
NO
No
Indicates the offset for the intrafrequency neighboring cell, which is used in evaluation for cell reselections. A larger value of this NO parameter results in a lower probability of cell reselections. This parameter is contained in SIB4. For details, see 3GPP TS 36.331.
NO
No
LBFD-00201803 / TDLBFD-00201803
Indicates whether handovers of UEs to the neighboring cell are prohibited.
NO
NO
No
NO
No
LOFD-002001 / TDLOFD-002001
Indicates whether this neighboring cell is automatically NO discovered by the ANR algorithm.
NO
No
LOFD-002001 / TDLOFD-002001
NO
No
LBFD-00201801 LOFD-002001
Indicates the name of the intrafrequency neighboring EUTRAN cell. The name is a string of a maximum of 99 characters. The string cannot be all null characters or contain any of the following characters: double NO quotation marks ("), commas (,), semicolons (;), equal signs (=), single quotation marks ('), three consecutive plus signs (+++), two or more consecutive blanks, and two or more consecutive percentage signs (%).
NO
No
YES
No
None
Indicates the DL EARFCN of the neighboring cell on the neighboring EUTRAN frequency. The DL EARFCN is calculated by using the following formula: DL carrier frequency (MHz) = Lowest frequency of the DL operating band + 0.1 x (DL EARFCN - Offset used to calculate the DL EARFCN). YES For example, if the DL EARFCN is 3100 in band 7 for a cell, the DL carrier frequency of the cell is calculated as 2620 + 0.1 x (3100 2750) = 2655 MHz. Band 1: DL EARFCN range: 0 to 599, lowest frequency of the DL operating band: 2110; Band 2: DL EARFCN range: 600 to 1199, lowest
YES
No
LBFD-001001 LBFD-00201803 LBFD-00201802
Indicates whether to set the UL EARFCN. If this parameter is set to NOT_CFG, the UL EARFCN is the DL NO EARFCN plus 18000 in FDD mode and is the same as the DL EARFCN in TDD mode. Indicates the UL EARFCN of the neighboring cell on the neighboring EUTRAN frequency. For an FDD cell, if no UL EARFCN is configured, the UL EARFCN equals the sum of the DL EARFCN and 18000. For a TDD cell, the UL EARFCN is calculated by using the following formula: NO UL carrier frequency (MHz) = Lowest frequency of the UL operating band + 0.1 x (UL EARFCN - Offset used to calculate the UL EARFCN). For example, if the UL EARFCN is 21100 in band 7 for a cell, the UL carrier frequency of the cell is calculated as 2500 + 0.1 x (21100 - 20750) = 2535 MHz.
NO
No
NO
No
LBFD-001001 LBFD-00201803 LBFD-00201802
Indicates whether to set the reselection priority of the neighboring EUTRAN frequency. If the value of this NO parameter is not specified, the UE does not reselect to neighboring cells on the frequency. Indicates the cell reselection priority of the neighboring EUTRAN frequency. It is contained in system information block type 5 (SIB5). The UE decides whether to reselect a neighboring cell on the frequency based on the value of this parameter and the absolute priority of the serving cell. If the value of this NO parameter is larger than the absolute priority of the serving cell, the UE starts measurements on neighboring cells on the frequency; then if the signal quality of some neighboring cells meets the related conditions, the UE starts cell reselection. If the value of this parameter is less
NO
No
LBFD-00201803 / TDLBFD-00201803
NO
No
LBFD-00201803
Indicates the time threshold for interfrequency cell reselection. A UE initiates a reselection to the inter-frequency neighboring cell only after the signal quality in the cell is better than that in NO the serving cell for a period defined by this parameter and, in addition, after the UE camps on the serving cell for longer than 1s. This parameter is contained in SIB5. For details, see 3GPP TS 36.331. Indicates whether to set the speeddependent scaling parameters related to cell reselection. If this parameter is NO set to NOT_CFG, speed-dependent cell reselections are not supported by default. Indicates the scaling factor applied to the cell reselection duration for medium-mobility NO UEs. This parameter is delivered in SIB5. For details, see 3GPP TS 36.331.
NO
No
LBFD-00201803 / TDLBFD-00201803
NO
No
LBFD-00201803 / TDLBFD-00201803
NO
No
LBFD-00201803 / TDLBFD-00201803
Indicates the scaling factor applied to the cell reselection duration for high-mobility NO UEs. This parameter is delivered in SIB5. For details, see 3GPP TS 36.331.
NO
No
LBFD-00201803 / TDLBFD-00201803
Indicates the measurement bandwidth of the inter-frequency neighboring cell on the frequency. The setting of this parameter depends on the bandwidth configuration of the cell. In E-UTRAN, a cell bandwidth is NO also expressed in units of resource blocks (RBs). Cell bandwidths 1.4 MHz, 3 MHz, 5 MHz, 10 MHz, 15 MHz, and 20 MHz correspond to 6 RBs, 15 RBs, 25 RBs, 50 RBs, 75 RBs, and 100 RBs, respectively.
YES
No
LBFD-001001 LBFD-00201803 LBFD-00201802
Indicates the frequency offset of the neighboring cell on the frequency. It is delivered in system information block type 5 (SIB5). NO It is used in the evaluation for cell reselection and for the triggering and stopping of event A4.
NO
No
LBFD-001001 LBFD-00201803
Indicates the RX level required for a neighboring cell on the frequency to become a candidate for reselection if the priority of the frequency is higher than that of the serving frequency. After measurements are started for NO neighboring cells on the frequency, the UE reselects to a neighboring cell on the frequency only if the RX level of the cell is better than the value specified by this parameter for a time-to-trigger. For details, see 3GPP TS 36.331.
NO
No
LBFD-00201803
Indicates the minimum RX level required for a neighboring cell on the frequency to become a candidate for reselection if the priority of the frequency is lower than or equal to that of the serving frequency. After measurements are started for neighboring cells on NO the frequency, the UE reselects to a neighboring cell on the frequency only if the RX level of the serving cell is lower than a specified threshold and that of the cell is higher than the value specified by this parameter for a timeto-trigger. For details, see 3GPP TS 36.331.
NO
No
LBFD-00201803
Indicates the RX level required for a neighboring cell on the frequency to become a suitable cell for selection. It is included in criteria S and used in the evaluation for cell selection. During the evaluation for cell reselection, the UE performs the following calculation: Srxlev = NO Measured RSRP value of a neighboring cell on the frequency Value of this parameter Compensated power. If Srxlev for a cell is better than a threshold for a time-to-trigger, reselection to the cell is started. For details, see 3GPP TS 36.304. Indicates whether to set the maximum power that the UE can apply to transmission on the neighboring EUTRAN frequency. If the value of this NO parameter is not specified, the maximum power is subject to the UE capability. For details, see 3GPP TS 36.101.
NO
No
LBFD-00201803
NO
No
LBFD-00201803
Indicates the maximum power that the UE can apply to transmission on the neighboring EUTRAN frequency. It is used in criteria S to calculate the NO compensated power. If the value of this parameter is not specified, the maximum power is subject to the UE capability. For details, see 3GPP TS 36.101. Indicates the configuration information about the intra-frequency neighboring cell of the serving cell. BitString00: Indicates that certain neighboring cells have the same MBSFN subframe. BitString01: Indicates that all neighboring cells have the same NO MBSFN subframe. BitString10: Indicates that all neighboring cells have mutually different MBSFN subframes. BitString11: Indicates that the serving TDD cells have neighboring cells of different ULDL configurations. For details, see 3GPP TS 36.331.
NO
No
LBFD-00201803
NO
No
Indicates whether all inter-frequency neighboring cells on this frequency are configured with at least two antenna ports. Set this parameter to TRUE if all interfrequency neighboring cells on NO this frequency are configured with at least two antenna ports. Set this parameter to FALSE if one inter-frequency neighboring cell on this frequency is configured with only one antenna port. Indicates the event to trigger coveragebased interfrequency handovers. This parameter can be set to EventA3, EventA4, or EventA5. If the neighboring EUTRAN frequency and the serving frequency are in the same frequency NO band, event A3 is recommended as it provides better handover performance in this situation. If the neighboring EUTRAN frequency and the serving frequency are in different frequency bands, event A4 or A5 is used.
NO
No
NO
No
LBFD-00201802
Indicates the RSRQbased minimum RX level required for a neighboring cell on the frequency to become a candidate for reselection if the RSRQ-based priority of the frequency is higher than that of the serving frequency. After measurements are started for neighboring cells on NO the neighboring EUTRAN frequency, the UE reselects to a neighboring cell on the frequency only if the RSRQbased RX level of the cell is higher than the value specified by this parameter for a timeto-trigger. For details, see 3GPP TS 36.331.
NO
No
LBFD-00201803 / TDLBFD-00201803
Indicates the RSRQbased minimum RX level required for a neighboring cell on the frequency to become a candidate for reselection if the RSRQ-based priority of the frequency is lower than that of the serving frequency. After measurements are started for neighboring cells on a frequency in the GERAN carrier NO frequency group, the UE reselects to a neighboring cell on the frequency only if the RSRQbased RX level of the serving cell is lower than a specified threshold and that of the cell is higher than the value specified by this parameter for a time-to-trigger. For details, see 3GPP TS 36.331.
NO
No
LBFD-00201803 / TDLBFD-00201803
Indicates whether to set the minimum NO required RX level.
NO
No
LBFD-00201803 / TDLBFD-00201803
Indicates the minimum RX level of an interfrequency neighboring cell, which is required for it to become a candidate for cell reselection. It determines the probability of NO triggering cell reselection to interfrequency neighboring cells on the frequency. The value of this parameter is contained in SIB5. For details, see 3GPP TS 36.331.
NO
No
LBFD-00201803 / TDLBFD-00201803
YES
No
None
Indicates the DL EARFCN of the inter-frequency blacklisted cell. The DL EARFCN is calculated by using the following formula: DL carrier frequency (MHz) = Lowest frequency of the DL operating band + 0.1 x (DL EARFCN - Offset used to calculate the DL EARFCN). For example, if the YES DL EARFCN is 3100 in band 7 for a cell, the DL carrier frequency of the cell is calculated as 2620 + 0.1 x (3100 2750) = 2655 MHz. Band 1: DL EARFCN range: 0 to 599, lowest frequency of the DL operating band: 2110; Band 2: DL EARFCN range: 600 to 1199, lowest frequency of the DL
YES
No
LBFD-00201803 LBFD-00201802
Indicates the starting physical cell ID of the interfrequency YES blacklisted cell. For details, see 3GPP TS 36.331.
YES
No
Indicates the name of the interNO frequency blacklisted cell.
NO
No
Indicates the physical cell ID range of the interfrequency NO blacklisted cell. For details, see 3GPP TS 36.331.
NO
No
YES
No
None
Indicates the mobile country code of the E-UTRAN neighboring cell. The PLMN consists of the MCC and the MNC. The MCC consists YES of three digits. The MNC consists of two to three digits. For example, MCC = 123, MNC = 45, PLMN = 12345. Indicates the mobile network code of the E-UTRAN neighboring cell. The PLMN consists of the MCC and the MNC. The MCC consists YES of three digits. The MNC consists of two to three digits. For example, MCC = 123, MNC = 45, PLMN = 12345.
YES
No
LBFD-00201802 / TDLBFD-00201802
YES
No
LBFD-00201802 / TDLBFD-00201802
Indicates the eNodeB identity of the inter-frequency neighboring cell. It uniquely identifies an eNodeB within a PLMN. The 28-bit EUTRAN cell identity is comprised of the cell identity and the eNodeB identity YES (represented by the most significant 20 bits). The cell global identity (CGI) of an E-UTRAN cell is comprised of the EUTRAN cell identity and the PLMN ID. For details, see 3GPP TS 36.413. Indicates the local identity of the interfrequency neighboring cell. It uniquely identifies a cell within an eNodeB. The 28-bit E-UTRAN cell identity is comprised of the cell identity (represented by the YES least significant eight bits) and the eNodeB identity. The cell global identity (CGI) of an E-UTRAN cell is comprised of the EUTRAN cell identity and the PLMN ID. For details, see 3GPP TS 36.413.
YES
No
LBFD-00201802 / TDLBFD-00201802
YES
No
LBFD-00201802
Indicates the cell individual offset for the inter-frequency neighboring cell, which is used in evaluation for handovers. It affects the probability of NO triggering interfrequency measurement reports. A larger value of this parameter indicates a higher probability. For details, see 3GPP TS 36.331.
NO
No
Indicates the offset for the interfrequency neighboring cell, which is used in evaluation for cell reselections. A larger value of this NO parameter results in a lower probability of cell reselections. This parameter is contained in SIB5. For details, see 3GPP TS 36.331.
NO
No
LBFD-00201803 / TDLBFD-00201803
Indicates whether handovers of UEs to the neighboring cell are prohibited.
NO
NO
No
NO
No
LOFD-002001 / TDLOFD-002001
Indicates the priority of the neighboring cell during blind handovers. Blind handover is a process in which the eNodeB instructs a UE to hand over to a specified neighboring cell without measurements. There are 32 priorities in total. NO The priority has a positive correlation with the value of this parameter. The value 0 indicates that blind handover is prohibited. Values 17 to 32 are designated for frequency-prioritybased handover, and values 1 to 16 are designated for other handover. Indicates whether this neighboring cell is automatically NO discovered by the ANR algorithm.
NO
No
NO
No
LOFD-002001 / TDLOFD-002001
NO
No
LBFD-00201802 LOFD-002001
Indicates the name of the interNO frequency neighboring cell.
NO
No
Indicates the mobile country code of the external E-UTRAN cell. The PLMN consists of the MCC and the MNC. The MCC consists YES of three digits. The MNC consists of two to three digits. For example, MCC = 123, MNC = 45, PLMN = 12345. Indicates the mobile network code of the external E-UTRAN cell. The PLMN consists of the MCC and the MNC. The MCC consists YES of three digits. The MNC consists of two to three digits. For example, MCC = 123, MNC = 45, PLMN = 12345. Indicates the eNodeB identity of the external EUTRAN cell. It uniquely identifies an eNodeB within a PLMN. The 28-bit EUTRAN cell identity is comprised of the cell identity and the eNodeB identity YES (represented by the most significant 20 bits). The cell global identity (CGI) of an E-UTRAN cell is comprised of the EUTRAN cell identity and the PLMN ID. For details, see 3GPP TS 36.413.
YES
No
YES
No
YES
No
Indicates the cell identity of the external E-UTRAN cell. It uniquely identifies a cell within an eNodeB. The 28-bit EUTRAN cell identity is comprised of the cell identity (represented by the YES least significant eight bits) and the eNodeB identity. The cell global identity (CGI) of an E-UTRAN cell is comprised of the EUTRAN cell identity and the PLMN ID. For details, see 3GPP TS 36.413.
YES
No
Indicates the DL EARFCN of the external E-UTRAN cell. The DL EARFCN is calculated by using the following formula: DL carrier frequency (MHz) = Lowest frequency of the DL operating band + 0.1 x (DL EARFCN - Offset used to calculate the DL EARFCN). For example, if the NO DL EARFCN is 3100 in band 7 for a cell, the DL carrier frequency of the cell is calculated as 2620 + 0.1 x (3100 2750) = 2655 MHz. Band 1: DL EARFCN range: 0 to 599, lowest frequency of the DL operating band: 2110; Band 2: DL EARFCN range: 600 to 1199, lowest frequency of the DL Indicates whether to set the UL EARFCN for the external EUTRAN cell. If this parameter is set to NOT_CFG, the UL NO EARFCN is the DL EARFCN plus 18000 in FDD mode and is the same as the DL EARFCN in TDD mode.
YES
No
LBFD-00201801 LBFD-00201802
NO
No
Indicates the UL EARFCN of the external E-UTRAN cell. For an FDD cell, if no UL EARFCN is configured, the UL EARFCN equals the sum of the DL EARFCN and 18000. For a TDD cell, the UL EARFCN is calculated by using the following formula: UL carrier NO frequency (MHz) = Lowest frequency of the UL operating band + 0.1 x (UL EARFCN - Offset used to calculate the UL EARFCN). For example, if the UL EARFCN is 21100 in band 7 for a cell, the UL carrier frequency of the cell is calculated as 2500 + 0.1 x (21100 - 20750) = 2535 MHz. Band 1: UL Indicates the physical cell ID of the external EUTRAN cell. For details, see 3GPP TS 36.331.
NO
No
LBFD-00201801 LBFD-00201802
NO
YES
No
LBFD-00201801 LBFD-00201802 LBFD-00201803
Indicates the tracking area code (TAC) of the external E-UTRAN cell. Two TAC values 0x0000(0) and 0xFFFE(65534) are reserved according to the NO protocol and will not be used in future versions. Therefore, do not use 0 or 65534 as a TAC value in TAC planning or configuration.
YES
No
Indicates the name of the external ENO UTRAN cell.
NO
No
Indicates the cell identity of the local cell. It uniquely identifies a cell within an eNodeB.
YES
YES
No
LBFD-00201803 / TDLBFD-00201803
Indicates the index of the GERAN carrier frequency group. It uniquely YES identifies a GERAN carrier frequency group.
YES
No
LOFD-001019 / TDLOFD-001019
Indicates the mobile country code (MCC) of the operator that shares the neighboring GERAN carrier frequency group. A public land mobile network (PLMN) ID is comprised of an MCC and a mobile YES network code (MNC). The MCC consists of three digits. The MNC consists of two to three digits. For example, if the MCC is 123 and the MNC is 45, then the PLMN ID is 12345.
YES
No
LBFD-00201803 / TDLBFD-00201803
Indicates the mobile network code (MNC) of the operator that shares the neighboring GERAN carrier frequency group. A public land mobile network (PLMN) ID is comprised of a mobile country code YES (MCC) and an MNC. The MCC consists of three digits. The MNC consists of two to three digits. For example, if the MCC is 123 and the MNC is 45, then the PLMN ID is 12345. Indicates whether to configure the cell reselection priority of the operator that NO shares the neighboring GERAN carrier frequency group.
YES
No
LBFD-00201803 / TDLBFD-00201803
NO
No
LBFD-00201803 / TDLBFD-00201803
Indicates the cell reselection priority of the operator that shares the neighboring GERAN carrier frequency group. If the related SPID configuration is specified, set this priority to the one specified in the SPID configuration. If no related SPID configuration is specified but this parameter is set, NO the eNodeB delivers the cell reselection priorities of all PLMNs supported by a UE by using the IE idleModeMobilityCo ntrolInfo in an RRC Connection Release message to the UE. If no related SPID configuration is specified and this parameter is not set, a UE uses the cell reselection priority of the Indicates the cell ID of the local cell. It uniquely identifies a YES cell within an eNodeB.
NO
No
LBFD-00201803 / TDLBFD-00201803
YES
No
None
Indicates the mobile country code of the neighboring UTRAN cell. The PLMN consists of the MCC and the MNC. The MCC consists YES of three digits. The MNC consists of two to three digits. For example, MCC = 123, MNC = 45, PLMN = 12345. Indicates the mobile network code of the neighboring UTRAN cell. The PLMN consists of the MCC and the MNC. The MCC consists YES of three digits. The MNC consists of two to three digits. For example, MCC = 123, MNC = 45, PLMN = 12345. Indicates the UTRAN cell ID. It uniquely identifies a cell within a PLMN.The 28-bit ID of the UTRAN cell consists of a 12-bit RNC ID (indicated by RncId) and a 16bit RNC cell ID YES (indicated by RncCellId). The formula for calculating the ID of the external UTRAN cell is as follows: External UTRAN cell ID = RNC ID x 65536 + RNC cell ID.
YES
No
LOFD-001019 / TDLOFD-001019
YES
No
LOFD-001019 / TDLOFD-001019
YES
No
LOFD-001019 / TDLOFD-001019
Indicates whether to allow handover of UEs to the neighboring cell that NO is determined by the neighboring relation. Indicates whether to permit or prohibit removal of the NO neighboring relationship by ANR. Indicates the priority of the neighboring cell during blind handovers. Blind handover is a process in which the eNodeB instructs a UE to hand over to a specified neighboring cell. NO There are 32 priorities altogether. The priority has a positive correlation with the value of this parameter. Note that the value 0 indicates that blind handovers to the neighboring cell are not allowed. Indicates whether this neighboring cell is automatically NO discovered by the ANR algorithm.
NO
No
LOFD-001019 / TDLOFD-001019 LOFD-002002
NO
No
LOFD-002001 / TDLOFD-002001 LOFD-002002
NO
No
LBFD-002018 / TDLBFD-002018
NO
No
LOFD-002001 / TDLOFD-002001 LOFD-002002
NO
No
LOFD-001019
Indicates the name of the UTRAN NO neighboring cell.
NO
No
LOFD-001019 / TDLOFD-001019
Indicates the ID of the eNodeB, which uniquely identifies NO an eNodeB within a PLMN.
NO
Yes
LOFD-001052 / TDLOFD-001052
Indicates the RNC ID of the neighboring UTRAN cell. This RNC ID must be the same NO as the 12 bits on the left of the corresponding UTRAN cell ID. Indicates the latest updated time of the system information that the eNodeB NO receives from the neighboring UTRAN cell through the RIM procedure. Indicates the time of the latest RIM request received by NO the neighboring UTRAN cell.
NO
Yes
LOFD-001052 / TDLOFD-001052
NO
Yes
LOFD-001052 / TDLOFD-001052
NO
Yes
LOFD-001052 / TDLOFD-001052
Indicates the cell identity of the local cell. It uniquely identifies a cell within an eNodeB.
YES
YES
No
LBFD-00201803 / TDLBFD-00201803
Indicates the DL UARFCN of the neighboring cell operating on the UTRAN frequency. The UARFCN range in each FDD frequency band is shown as follows: Band 1: Normal UARFCNs: [10562-10838] Special UARFCNs: none Band 2: Normal UARFCNs: [9662-9938] YES Special UARFCNs: (412, 437, 462, 487, 512, 537, 562, 587, 612, 637, 662, 687) Band 3: Normal UARFCNs: [1162-1513] Special UARFCNs: none Band 4: Normal UARFCNs: [1537-1738] Special UARFCNs: (1887, 1912, 1937, 1962, 1987, 2012, 2037, 2062, 2087) Band 5: Indicates the mobile country code (MCC) of the neighboring UTRAN cell. A public land mobile network (PLMN) ID is comprised of an MCC and a mobile network code (MNC). YES The MCC consists of three digits. The MNC consists of two to three digits. For example, if the MCC is 123 and the MNC is 45, then the PLMN ID is 12345.
YES
No
LOFD-001019 / TDLOFD-001019
YES
No
LBFD-00201803 / TDLBFD-00201803
Indicates the mobile network code (MNC) of the neighboring UTRAN cell. A public land mobile network (PLMN) ID is comprised of a mobile country code (MCC) and an YES MNC. The MCC consists of three digits. The MNC consists of two to three digits. For example, if the MCC is 123 and the MNC is 45, then the PLMN ID is 12345. Indicates whether to configure the cell reselection priority of the operator that NO shares the neighboring UTRAN frequency.
YES
No
LBFD-00201803 / TDLBFD-00201803
NO
No
LBFD-00201803 / TDLBFD-00201803
Indicates the cell reselection priority of the operator that shares the neighboring UTRAN frequency. If the related SPID configuration is specified, set this priority to the one specified in the SPID configuration. If no related SPID configuration is specified but this parameter is set, the eNodeB delivers NO the cell reselection priorities of all PLMNs supported by a UE by using the IE idleModeMobilityCo ntrolInfo in an RRC Connection Release message to the UE. If no related SPID configuration is specified and this parameter is not set, a UE uses the cell reselection priority of the neighboring UTRAN Indicates the cell ID of the local cell. It uniquely identifies a YES cell within an eNodeB.
NO
No
LBFD-00201803 / TDLBFD-00201803
YES
No
None
Indicates the DL UARFCN of the neighboring cell on the UTRAN frequency. The UARFCN range in each FDD frequency band is shown as follows: Band 1: Normal UARFCNs: [10562-10838] Special UARFCNs: none Band 2: Normal UARFCNs: [9662-9938] YES Special UARFCNs: (412,437,462,487,5 12,537,562,587,612 ,637,662,687) Band 3: Normal UARFCNs: [1162-1513] Special UARFCNs: none Band 4: Normal UARFCNs: [1537-1738] Special UARFCNs: (1887, 1912, 1937, 1962, 1987, 2012, 2037, 2062, 2087) Band 5: Indicates the working mode supported by the NO UTRAN in the current UARFCN. Indicates the TDD/FDD mode of the inter-RAT UTRAN.
YES
No
LBFD-002009 LOFD-001019 LOFD-002002
NO
No
LOFD-001019 / TDLOFD-001019 LBFD-00201803 / TDLBFD-00201803
NO
NO
No
LOFD-001019 / TDLOFD-001019 LOFD-002002
Indicates whether to set the UL UARFCN of the cell on the UTRAN frequency. If the value of this parameter is not specified, the default UL UARFCN is used. For an UTRAN FDD cell, the way to calculate the default UL UARFCN varies depending on whether the DL frequency is a normal or special NO one. The default UL UARFCN is calculated as follows if the DL frequency is a normal one: Band 1: UL UARFCN = DL UARFCN - 950; Band 2: UL UARFCN = DL UARFCN - 400; Band 3: UL UARFCN = DL UARFCN - 475; Band 4: UL
NO
No
LOFD-001019 LBFD-00201803
Indicates the UL UARFCN of the neighboring cell on the UTRAN frequency. The UARFCN range in each FDD frequency band is shown as follows: Band 1: Normal UARFCNs: [9612-9888] Special UARFCNs: none Band 2: Normal UARFCNs: [9262-9538] NO Special UARFCNs: (12, 37, 62, 87, 112, 137, 162, 187, 212, 237, 262, 287) Band 3: Normal UARFCNs: [937-1288] Special UARFCNs: none Band 4: Normal UARFCNs: [1312-1513] Special UARFCNs: (1662, 1687, 1712, 1737, 1762, 1787, 1812, 1837, 1862) Band 5: Indicates whether to set the priority of a cell assigned with NO the UARFCN used in cell reselection to UTRAN.
NO
No
LOFD-001019 LBFD-00201803 LOFD-002002
NO
No
LBFD-00201803 / TDLBFD-00201803
The UE decides whether to reselect a neighboring cell on the UTRAN frequency based on the value of this parameter and the absolute priority of the serving cell. If the value of this parameter is larger than the absolute priority of the serving cell, the UE starts measurements on neighboring cells on NO the UTRAN frequency; then if the signal quality of some neighboring cells meets the related conditions, the UE starts cell reselection. If the value of this parameter is smaller than the absolute priority of the serving cell, the UE starts the measurements only when the signal quality of the Indicates the maximum power that the UE can apply to transmission on the UTRAN frequency. NO It is used in criteria S to calculate the compensated power. For details, see 3GPP TS 25.104.
NO
No
LBFD-00201803 LBFD-002009
NO
No
LBFD-00201803
Indicates the frequency offset of the cell on the UTRAN frequency. It determines the probability of NO triggering measurement reports for event B1. For details, see 3GPP TS 36.331.
NO
No
LOFD-001019 LOFD-002002
Indicates the minimum quality level required for a cell on the UTRAN frequency to become a candidate for reselection. This parameter is applied only to reselection to UTRAN FDD cells. NO A neighboring cell on the UTRAN frequency can become a candidate for reselection only when the signal quality of the cell is better than the value of this parameter.
NO
No
LBFD-00201803 / TDLBFD-00201803
Indicates the RX level required for a neighboring cell on the UTRAN frequency to become a candidate for selection. It is included in criteria S and used in the evaluation for cell selection. During the evaluation for cell reselection, the UE performs the following calculation: Srxlev = NO Measured RSRP value of a neighboring cell on the frequency Value of this parameter Compensated power. If Srxlev for a neighboring cell is better than a threshold for a timeto-trigger, reselection to the cell is started. For details, see 3GPP TS 25.304.
NO
No
LBFD-00201803 / TDLBFD-00201803
Indicates the minimum RX level required for a neighboring cell on the UTRAN frequency to become a candidate for reselection if the priority of the frequency is higher than that of the serving frequency. After measurements are started for NO neighboring cells on the UTRAN frequency, the UE reselects to a neighboring cell on the frequency only if the RX level of the cell is higher than the value specified by this parameter for a time-to-trigger. For details, see 3GPP TS 36.331.
NO
No
LBFD-00201803
Indicates the minimum RX level required for a neighboring cell on the UTRAN frequency to become a candidate for reselection if the priority of the frequency is lower than that of the serving frequency. After measurements are started for neighboring cells on the UTRAN NO frequency, the UE reselects to a neighboring cell on the frequency only if the RX level of the serving cell is lower than a specified threshold and that of the cell is higher than the value specified by this parameter for a timeto-trigger. For details, see 3GPP TS 36.331.
NO
No
LBFD-00201803
Indicates the RSRQbased minimum RX level required for a neighboring cell on the frequency to become a candidate for reselection if the RSRQ-based priority of the frequency is higher than that of the serving frequency. After measurements are started for NO neighboring cells on the UTRAN frequency, the UE reselects to a neighboring cell on the frequency only if the RSRQ-based RX level of the cell is higher than the value specified by this parameter for a time-to-trigger. For details, see 3GPP TS 36.331.
NO
No
LBFD-00201803 / TDLBFD-00201803
Indicates the RSRQbased minimum RX level required for a neighboring cell on the frequency to become a candidate for reselection if the RSRQ-based priority of the frequency is lower than that of the serving frequency. After measurements are started for neighboring cells on NO the frequency, the UE reselects to a cell on the frequency only if the RSRQ-based RX level of the serving cell is lower than a specified threshold and that of the cell is higher than the value specified by this parameter for a time-to-trigger. For details, see 3GPP TS 36.331.
NO
No
LBFD-00201803 / TDLBFD-00201803
Indicates the packet switched (PS) priority of the neighboring UTRAN frequency, that is, the priority for the neighboring UTRAN frequency to carry PS services. It is used in coveragebased handovers. When UtranFreqLayerMea sSwitch is turned on: If there are both high and low PSpriority UTRAN NO frequencies, the high PS-priority UTRAN frequencies are preferentially measured; if there are only low PSpriority UTRAN frequencies, these low PS-priority UTRAN frequencies are measured. If UtranFreqLayerBlin dSwitch is turned on, the target cell for a blind coveragebased handover is
NO
No
LOFD-001019 / TDLOFD-001019
Indicates the circuit switched (CS) priority of the neighboring UTRAN frequency, that is, the priority for the neighboring UTRAN frequency to carry CS services. It is used in blind handovers for CSFB to UTRAN. If UtranFreqLayerBlin dSwitch is turned on, the target cell NO for a blind handover is preferentially selected from the neighboring UTRAN cells on high CSpriority frequencies. If all neighboring UTRAN cells are on low CS-priority frequencies, the target cell is selected from all neighboring UTRAN cells. Indicates the mobile country code of the external UTRAN cell. The PLMN consists of the MCC and the MNC. The MCC consists YES of three digits. The MNC consists of two to three digits. For example, MCC = 123, MNC = 45, PLMN = 12345.
NO
No
LOFD-001019 / TDLOFD-001019
YES
No
LOFD-001019 / TDLOFD-001019
Indicates the mobile network code of the external UTRAN cell. The PLMN consists of the MCC and the MNC. The MCC consists YES of three digits. The MNC consists of two to three digits. For example, MCC = 123, MNC = 45, PLMN = 12345. Indicates the ID of the external UTRAN cell. It uniquely identifies a UTRAN cell within a PLMN.The 28-bit ID of the external UTRAN cell consists of a 12-bit RNC ID (indicated by RncId) and a 16YES bit RNC cell ID (indicated by RncCellId). The formula for calculating the ID of the external UTRAN cell is as follows: External UTRAN cell ID = RNC ID x 65536 + RNC cell ID.
YES
No
LOFD-001019 / TDLOFD-001019
YES
No
LOFD-001019
Indicates the type of NO the UTRAN cell.
NO
No
LOFD-001019 / TDLOFD-001019
Indicates the DL UARFCN of the external UTRAN cell. The UARFCN range in each FDD frequency band is shown as follows: Band 1: Normal UARFCNs: [10562-10838] Special UARFCNs: none Band 2: Normal UARFCNs: [9662-9938] Special UARFCNs: (412,437,462,487,5 NO 12,537,562,587,612 ,637,662,687) Band 3: Normal UARFCNs: [1162-1513] Special UARFCNs: none Band 4: Normal UARFCNs: [1537-1738] Special UARFCNs: (1887, 1912, 1937, 1962, 1987, 2012, 2037, 2062, 2087) Band 5: Normal UARFCNs: [4357-4458]
YES
No
LOFD-001019
Indicates whether to set the UL UARFCN for the external UTRAN cell. If the value of this parameter is not specified, the default DL UARFCN is used. For an UTRAN FDD cell, the way to calculate the default UL UARFCN varies depending on whether the DL frequency is a normal or special NO one. The default UL UARFCN is calculated as follows if the DL frequency is a normal one: Band 1: UL UARFCN = DL UARFCN - 950; Band 2: UL UARFCN = DL UARFCN - 400; Band 3: UL UARFCN = DL UARFCN - 475; Band 4: UL
NO
No
LOFD-001019
Indicates the UL UARFCN of the external UTRAN cell. The UARFCN range in each FDD frequency band is shown as follows: Band 1: Normal UARFCNs: [9612-9888] Special UARFCNs: none Band 2: Normal UARFCNs: [9262-9538] Special UARFCNs: (12, 37, 62, 87, 112, NO 137, 162, 187, 212, 237, 262, 287) Band 3: Normal UARFCNs: [937-1288] Special UARFCNs: none Band 4: Normal UARFCNs: [1312-1513] Special UARFCNs: (1662, 1687, 1712, 1737, 1762, 1787, 1812, 1837, 1862) Band 5: Normal UARFCNs: [4132-4233] Indicates the RNC ID of the external UTRAN cell. The most left 12 bits of NO external UTRAN cell ID must be set to the RNC ID of the external cell. Indicates whether to set the routing area code (RAC) of the external UTRAN cell. This parameter must be set to CFG NO if the external UTRAN cell supports packet switched (PS) services.
NO
No
LOFD-001019
YES
No
LOFD-001019
NO
No
LOFD-001019
Indicates the routing NO area code.
NO
No
LOFD-001019
Indicates the primary DL scrambles of the NO external UTRAN cell. For details, see 3GPP TS 25.331.
YES
No
LOFD-001019 / TDLOFD-001019
Indicates the LAC of the external UTRAN NO cell.
YES
No
Indicates the name of the external NO UTRAN cell.
NO
No
LOFD-001019 / TDLOFD-001019
Indicates whether the external UTRAN cell supports single radio voice call continuity (SRVCC) for both CS and PS NO services. If this parameter is set to BOOLEAN_FALSE, the cell supports only SRVCC for CS services.
NO
No
LOFD-001019
Indicates the threshold above which a neighboring cell is added to a serving cell by ANR. The threshold is the percentage of the number of successful handovers to the total number of handovers from the serving cell to the NO neighboring cell. In this version, this parameter is no longer used internally although it supports setting synchronization between the M2000 and the eNodeB. Avoid using this parameter as it will be removed from later versions.
NO
No
LOFD-002001 / TDLOFD-002001
Indicates the threshold for removing a neighbor relationship with a cell by ANR based on the handover success rate. The threshold is the percentage of the number of successful handovers to the total number of handovers from the local cell to the neighboring cell. NO For example, an external cell is configured as a neighboring cell for all cells under an eNodeB, and this neighboring cell permits automatic removal of the neighboring relationship by ANR. If the success rate of handovers from each cell under the eNodeB to this neighboring cell is lower than or Indicates the threshold for the total number of handovers to an intra-RAT neighboring cell, above which ANR NO begins to evaluate the removal of the neighboring relation in the case of a low handover success rate.
NO
No
LOFD-002001 / TDLOFD-002001
NO
No
LOFD-002001 / TDLOFD-002001
Indicates the period during which the total number of handovers to an intra-RAT neighboring cell is measured by ANR NO to evaluate the removal of the neighboring relation in the case of a low handover success rate. Indicates the number of periodic measurement NO reports sent for fast ANR.
NO
No
LOFD-002001 / TDLOFD-002001
NO
No
LOFD-002001 / TDLOFD-002001
Indicates the interval at which periodic NO measurement reports are sent for fast ANR.
NO
No
LOFD-002001 / TDLOFD-002001
Indicates the fast ANR checking timer. When the timer is expired, the NO eNodeB automatically checks whether to disable fast ANR.
NO
No
LOFD-002001 / TDLOFD-002001 LOFD-002002
Indicates the reference signal received power (RSRP) threshold for intra-RAT fast ANR. If the signal quality in a neighboring ENO UTRAN cell reported by the UE is lower than the threshold, the cell is not automatically added as an external cell of the eNodeB. Indicates the maximum allowed number of UEs that perform intra-RAT measurements for fast ANR. After the number of UEs performing intraRAT measurements NO for fast ANR reaches the maximum number, intra-RAT measurements for fast ANR will not be performed on other UEs. Indicates the maximum allowed number of UEs that perform inter-RAT measurements for fast ANR. After the number of UEs performing interRAT measurements NO for fast ANR reaches the maximum number, inter-RAT measurements for fast ANR will not be performed on other UEs.
NO
No
LOFD-002001 / TDLOFD-002001 LOFD-002002
NO
No
LOFD-002001 / TDLOFD-002001
NO
No
LOFD-002002
Indicates the minimum required number of UEs that have performed measurements for NO fast ANR before intra-RAT fast ANR can be automatically disabled. Indicates the minimum required number of UEs that have performed measurements for NO fast ANR before inter-RAT fast ANR can be automatically disabled. Indicates the mode for optimizing neighboring relations. If this parameter is set to FREE, neighboring relations are optimized automatically by ANR. If this NO parameter is set to CONTROLLED, neighboring relations to be added or removed are reported to the M2000 and then subject to manual processing for optimization.
NO
No
LOFD-002001 / TDLOFD-002001
NO
No
LOFD-002002
NO
No
LOFD-002001 / TDLOFD-002001
Indicates the period during which the number of handovers are measured for neighboring relation removal from a neighbor relation table (NRT). In a measurement period for neighboring relation NO removal, when the total number of handovers from a cell exceeds the threshold for neighboring relation removal, the neighboring cells that are not detected by UEs are removed from the NRT. Indicates the number of handovers above which neighboring relations are to be removed from a neighbor relation table (NRT). In a measurement period for neighboring relation NO removal, when the total number of handovers from a cell exceeds the value of this parameter, the neighboring cells that are not detected by UEs are removed from the NRT.
NO
No
LOFD-002001 / TDLOFD-002001
NO
No
LOFD-002001 / TDLOFD-002001
Indicates the switch used to enable or disable proactive PCI collision detection. Within a specified duration after this switch is turned on, the eNodeB delivers measurement configurations for NO proactive PCI collision detection to UEs that meet specific requirements. Then, the eNodeB starts the detection based on the measurement reports from the UEs. Indicates the start time of the active PCI collision detection. If the stop time is earlier than NO or the same as the start time, the stop time is assumed to be the time of the next day. Indicates the stop time of the active PCI collision detection. If the stop time is earlier than NO or the same as the start time, the stop time is assumed to be the time of the next day.
NO
No
LOFD-002001 / TDLOFD-002001
NO
No
LOFD-002001 / TDLOFD-002001
NO
No
LOFD-002001 / TDLOFD-002001
Indicates the received signal code power (RSCP) threshold for fast ANR with UTRAN. If the signal quality in a neighboring UTRAN cell NO reported by the UE is lower than the threshold, the cell is not automatically added as an external cell of the eNodeB. Indicates the received signal strength indicator (RSSI) threshold for fast ANR with GERAN. If the signal quality in a neighboring NO GERAN cell reported by the UE is lower than the threshold, the cell is not automatically added as an external cell of the eNodeB. Indicates the pilot strength threshold for fast ANR with CDMA2000 1xRTT. If the signal quality in a neighboring CDMA2000 1xRTT NO cell reported by the UE is lower than the threshold, the cell is not automatically added as an external cell of the eNodeB.
NO
No
LOFD-002001 / TDLOFD-002001 LOFD-002002
NO
No
LOFD-002001 / TDLOFD-002001 LOFD-002002
NO
No
LOFD-002001 / TDLOFD-002001 LOFD-002002
Indicates the pilot strength threshold for fast ANR with CDMA2000 HRPD. If the signal quality in a neighboring CDMA2000 HRPD NO cell reported by the UE is lower than the threshold, the cell is not automatically added as an external cell of the eNodeB. Indicates the switch for the algorithm for periodically updating cell IDs. If this parameter is set to BOOLEAN_TRUE, cell IDs are periodically NO updated, inserted into the system information, and broadcast to the associated UEs once the time at which the algorithm begins to take effect is reached. Indicates the time at which the algorithm for periodically updating cell IDs begins to take effect. If the switch for the algorithm is turned on, cell IDs are periodically NO updated, inserted into the system information, and broadcast to the associated UEs once the time specified by this parameter is reached.
NO
No
LOFD-002001 / TDLOFD-002001 LOFD-002002
NO
No
LBFD-002009 / TDLBFD-002009
NO
No
LBFD-002009 / TDLBFD-002009
Indicates the period NO of updating cell IDs.
NO
No
LBFD-002009 / TDLBFD-002009
Indicates the collective switch used to enable or disable handover and CS fallback algorithms. Flash CS fallback to UTRAN: If the switch for CS fallback to UTRAN NO is turned off, this switch does not take effect; Flash CS fallback to GERAN: If the switch for CS fallback to GERAN is turned off, this switch does not take effect.
NO
No
LBFD-00201801 / TDLBFD-00201801 LBFD-00201802 / TDLBFD-00201802 LOFD-001019 / TDLOFD-001019 LOFD-001020 / TDLOFD-001020 LOFD-001021 LOFD-001022 / TDLOFD-001022 LOFD-001023 / TDLOFD-001023 LOFD-001033 / TDLOFD-001033 LOFD-001034 / TDLOFD-001034 LOFD-001035 LOFD-001043 / TDLOFD-001043 LOFD-001044 / TDLOFD-001044 LOFD-001046 / TDLOFD-001046 LBFD-00201805
Indicates the switches corresponding to the inputs based on which the eNodeB determines handover policies. Note that EutranVoipCapSwit ch will be removed NO in the later versions. In this version, the setting of this switch is still synchronized between the M2000 and the eNodeB, but it is no longer used internally. Therefore, avoid using this switch.
NO
No
LOFD-001019 / TDLOFD-001019 LOFD-001020 / TDLOFD-001020 LOFD-001021 LOFD-001022 / TDLOFD-001022 LOFD-001023 / TDLOFD-001023 LOFD-001033 / TDLOFD-001033 LOFD-001034 / TDLOFD-001034 LOFD-001035 LOFD-001043 / TDLOFD-001043 LOFD-001044 / TDLOFD-001044 LOFD-001045 / TDLOFD-001045 LOFD-001046 / TDLOFD-001046
Indicates the DL ICIC algorithm switch. There are four states. DlIcicSwitch_OFF_ ENUM:Indicates that DL ICIC is disabled. DlIcicDynamicSwitc h_ON_ENUM:Indic ates that dynamic DL ICIC is enabled. DlIcicStaticSwitch_ ON_ENUM:Indicate s that static DL ICIC NO is enabled. DlIcicReuse3Switch _ON_ENUM: This state will be removed in the later versions. In this version, the setting of this state is still synchronized between the M2000 and the eNodeB, but it is no longer used internally. Therefore, avoid using this state.
NO
No
Indicates the ANR algorithm switch. Switches related to ANR are described as follows: IntraRatEventAnrS witch: If this switch is turned on, intraRAT event-triggered ANR is enabled to construct and optimize intra-RAT neighboring relations by triggering intra-RAT handover events. IntraRatFastAnrSwit NO ch: If this switch is turned on, intraRAT fast ANR is enabled to construct and optimize intraRAT neighboring relations by performing periodic intra-RAT measurements. IntraRatAnrAutoDel Switch: If both IntraRatEventAnrS witch and this switch are turned on and No Remove of an intra-RAT
NO
No
LOFD-002001 / TDLOFD-002001 LOFD-002002
Indicates the switch used to enable or disable the redirection algorithm. GeranFlashRedirect Switch: If both this switch and the switch for redirection to GERAN are turned on, fast redirection NO to GERAN is enabled. UranFlashRedirectS witch: If both this switch and the switch for redirection to UTRAN are turned on, fast redirection to UTRAN is enabled.
NO
No
Indicates the switches for Mobility Robustness Optimization (MRO) algorithms. If the switch for a specific MRO algorithm is enabled, fewer handover failures will occur and the mobility robustness will be improved. If the switch is set to OFF, the corresponding MRO algorithm is disabled. NO IntraFreqMroSwitch: If this switch is turned on, the eNodeB can dynamically adjust the intra-frequency handover parameters to increase the intrafrequency handover success rate; if the switch is turned off, the adjustment is not performed. InterFreqMroSwitch: If this switch is turned on, the
NO
No
LOFD-002005 / TDLOFD-002005
Indicates the switch for the TCP proxy enhancer (TPE) algorithm. The TPE algorithm increases the rates of TCP services by measures such as ACK copying, ACK splitting, and local ACK retransmission. If this switch is NO turned on, the TPE algorithm is enabled. In this situation, the algorithm is valid only for UEs that newly access or reaccess the network. If this switch is turned off, the TPE algorithm is disabled. This parameter will be removed in the later versions. In this version, the setting of this parameter is still synchronized NO between the M2000 and the eNodeB, but it is no longer used internally. Therefore, avoid using this parameter.
NO
No
NO
No
LOFD-00101402 / TDLOFD-00101402
Indicates the switch used to enable or disable UL ICIC in the frequency domain. If this switch is set to OFF, UL ICIC in the frequency domain is disabled in the eNodeB cells. If this switch is set to NO STATIC, static UL ICIC in the frequency domain is enabled in the eNodeB cells. If this switch is set to DYNAMIC, dynamic UL ICIC in the frequency domain is enabled in the eNodeB cells. Indicates the location services (LCS) switch. OtdoaSwitch: If the switch is turned on, observed time difference of arrivalNO based (OTDOAbased) positioning is enabled. If the switch is turned off, OTDOA-based positioning is disabled.
NO
No
NO
No
LOFD-001047 / TDLOFD-001047
Indicates the switch for UL flow control over the air interface. If this switch is turned on, the scheduling algorithm is instructed to limit the UL data rate of UEs upon UL transmission congestion. This method prevents UL congestion in the eNodeB, but affects fairness and differentiation for NO combined services. If this switch is turned off, the scheduling algorithm is not notified and therefore no rate restriction is applied to UL data from UEs in the case of UL congestion. In this case, UL congestion may occur in an eNodeB, but fairness and differentiation for
NO
No
None
Indicates the switch for reporting PCI collision alarms. If the switch is turned on, the PCI collision alarm is displayed on the local maintenance terminal (LMT) when a PCI collision among external cells or among NO neighboring cell occurs. If the switch is turned off, the PCI collision alarm is not displayed when such a PCI collision actually occurs. Note that in this situation, the PCI collision still persists. Indicates the switch used to enable or disable the eNodeBlevel energy conservation function. This function is achieved through the symbolbased power amplifier (PA) shutdown. Symbolbased PA shutdown is applicable in single-mode eNodeBs. If this NO function is enabled, the eNodeB shuts down power amplifiers (PAs) on the corresponding RF unit when it detects no signal transmitted on OFDM symbols in DL subframes. This reduces static power consumption and hence conserves energy for the eNodeB.
NO
No
LOFD-002007 / TDLOFD-002007
NO
No
LOFD-001070 / TDLOFD-001070
Indicates the collective switch for the RAN information management (RIM) function. UTRAN_RIM_SWIT CH: Indicates the switch used to enable or disable the RIM procedure that requests eventdriven multiple reports from UTRAN cells. If this switch is turned on, the eNodeB can send NO RANINFORMATIONREQUEST protocol data units (PDUs) to UTRAN cells to request multiple event-driven reports. If this switch is turned off, the eNodeB cannot send RANINFORMATIONREQUEST PDUs to UTRAN cells to request multiple event-driven
NO
No
Indicates the ANR algorithm switch in eRAN sharing mode. Related switches are described as follows: NBSLTEPLMNRou ndSwitch: If this switch is turned on, some neighboring eNodeBs provide cells that work in eRAN sharing mode and broadcast their PLMN lists in a round robin (RR) NO manner. In this situation, if IntraRatEventAnrS witch or IntraRatFastAnrSwit ch is turned on for the local eNodeB, the local eNodeB will ask the M2000 for the actual cell global identifier (CGI) and PLMN list for a cell broadcasting PLMNs in an RR manner after the UE reports the CGI of
NO
No
Indicates the switch used to enable or disable the UTRAN hierarchy-based measurement algorithm and the UTRAN hierarchybased blindhandover algorithm.If UtranFreqLayerMea sSwitch is turned on, the UTRAN hierarchy-based measurement algorithm takes effect for NO measurements related to coveragebased and CSFBtriggered handovers from the E-UTRAN to the UTRAN. If UtranFreqLayerBlin dSwitch is turned on, the UTRAN hierarchy-based blind-handover algorithm takes effect for coveragebased and CSFBtriggered handovers from the E-UTRAN Indicates the interval for detecting license alarms. During this interval, the eNodeB detects license control NO items and reports license alarms if the condition for generating license alarms is met.
NO
No
LBFD-002018 / TDLBFD-002018
NO
No
None
Indicates the threshold for generating license alarms. A license alarm is generated if the proportion of the actually used value to the allocated value of the license control item exceeds this threshold.
NO
NO
No
None
Indicates the interval for clearing license alarms. During this interval, the eNodeB detects license control NO items and clears license alarms if the condition for clearing license alarms is met. Indicates the threshold for clearing license alarms. A license alarm is cleared if the proportion of the NO actually used value to the allocated value of the license control item is below this threshold. Indicates the proportion of the UL licensed traffic to the total licensed traffic of the eNodeB. The total licensed traffic is NO the sum of UL and DL licensed traffic. If this parameter is set to 100, there is no DL licensed traffic, affecting service admission.
NO
No
None
NO
No
None
NO
No
LOFD-001036 / TDLOFD-001036
Indicates the mode of traffic sharing between the operators in eRAN sharing scenarios. If this parameter is set to SHARING, all the operators share the total traffic of the eNodeB without proportional limits. If this parameter is set NO to DEDICATE, all the operators share the total traffic of the eNodeB based on specific proportions. However, the vacant traffic of an operator can be used by other operators. Indicates the proportion of the traffic used by the first operator to the total licensed traffic of the eNodeB when all operators share traffic based on specific NO proportions in eRAN sharing scenarios and the eNodeB does not work in independent mode. This parameter cannot be set to 0 if the operator has been configured.
NO
No
LOFD-001036 / TDLOFD-001036
NO
No
LOFD-001036 / TDLOFD-001036
Indicates the proportion of the traffic used by the second operator to the total licensed traffic of the eNodeB when all operators share traffic based on specific proportions NO in eRAN sharing scenarios and the eNodeB does not work in independent mode. This parameter cannot be set to 0 if the operator has been configured. Indicates the proportion of the traffic used by the third operator to the total licensed traffic of the eNodeB when all operators share traffic based on specific NO proportions in eRAN sharing scenarios and the eNodeB does not work in independent mode. This parameter cannot be set to 0 if the operator has been configured.
NO
No
LOFD-001036 / TDLOFD-001036
NO
No
LOFD-001036 / TDLOFD-001036
Indicates the proportion of the traffic used by the fourth operator to the total licensed traffic of the eNodeB when all operators share traffic based on specific proportions NO in eRAN sharing scenarios and the eNodeB does not work in independent mode. This parameter cannot be set to 0 if the operator has been configured. Indicates the proportion of the traffic shared by the first operator to the total licensed traffic of the eNodeB when all operators NO share traffic based on specific proportions in eRAN sharing scenarios and the eNodeB does not work in independent mode. Indicates the proportion of the traffic shared by the second operator to the total licensed traffic of the eNodeB when all operators share NO traffic based on specific proportions in eRAN sharing scenarios and the eNodeB does not work in independent mode.
NO
No
LOFD-001036 / TDLOFD-001036
NO
No
LOFD-001036 / TDLOFD-001036
NO
No
LOFD-001036 / TDLOFD-001036
Indicates the proportion of the traffic shared by the third operator to the total licensed traffic of the eNodeB when all operators NO share traffic based on specific proportions in eRAN sharing scenarios and the eNodeB does not work in independent mode. Indicates the proportion of the traffic shared by the fourth operator to the total licensed traffic of the eNodeB when all operators share NO traffic based on specific proportions in eRAN sharing scenarios and the eNodeB does not work in independent mode. Indicates the period of measurement for MRO. During the period, the number of handovers is measured and abnormal scenarios (including premature NO handover, delayed handover, and pingpong handover) are identified. After the period elapses, the eNodeB makes a decision on parameter adjustment.
NO
No
LOFD-001036 / TDLOFD-001036
NO
No
LOFD-001036 / TDLOFD-001036
NO
No
LOFD-002005 / TDLOFD-002005
Indicates the threshold for enabling MRO based on the handover success rate. MRO is applied and parameter NO adjustment is started only if the success rate of handovers from the local cell to a neighboring cell is below this threshold. Indicates the threshold of the number of handovers required for enabling MRO. MRO is applied and parameter adjustment is NO started only if the number of handovers from the local cell to a neighboring cell reaches this threshold. Indicates the time threshold for pingpong handover. If a UE is handed over back to the source cell after staying in the target cell for a period shorter than NO this threshold, the eNodeB decides that a ping-pong handover occurs based on the history information about this UE.
NO
No
LOFD-002005 / TDLOFD-002005
NO
No
LOFD-002005 / TDLOFD-002005
NO
No
LOFD-002005 / TDLOFD-002005
Indicates the threshold for the percentage of intraRAT ping-pong handovers. If the percentage of intraRAT ping-pong handovers exceeds the threshold, parameter NO adjustment is performed to reduce the number of pingpong handovers. If the percentage is lower than the threshold, parameter adjustment is not performed. Indicates the threshold for identifying abnormal coverage of the serving cell. Weak coverage or no coverage in the overlapping area between cells leads to radio link failures or handover failures. Within a NO measurement period, if the number of such failures between the serving cell and a neighboring cell exceeds this threshold, the eNodeB does not tune MRO-related parameters of the neighboring cell.
NO
No
LOFD-002005 / TDLOFD-002005
NO
No
LOFD-002005 / TDLOFD-002005
Indicates the reference signal received power (RSRP) threshold for a serving cell. The threshold is used to identify abnormal coverage in a serving cell. When a UE successfully reaccesses a network after a radio link failure (RLF) or handover failure, the UE submits an RLF NO report. In the report, if the RSRP value of the serving cell is less than the RSRP threshold for the serving cell and the RSRP value of a neighboring cell is less than the RSRP threshold for neighboring cells, abnormal coverage exists in the overlapping area between the serving cell and this neighboring cell. If
NO
No
LOFD-002005 / TDLOFD-002005
Indicates the reference signal received power (RSRP) threshold for neighboring cells, which is used to identify abnormal coverage between a serving cell and its neighboring cells. When a UE successfully reaccesses a network after a radio link failure (RLF) or handover failure, the UE NO submits an RLF report. In the report, if the RSRP value of the serving cell is less than the RSRP threshold for the serving cell and the RSRP value of a neighboring cell is less than the RSRP threshold for neighboring cells, abnormal coverage exists in the overlapping area between the serving cell and this Indicates the index of a simulated load configuration. One BS can store 10 YES simulated load configurations, which are identified by the indexes. Indicates the RB usage threshold of a simulated load configuration. If the RB usage of a cell NO is below this threshold, the simulated load scheduling is performed.
NO
No
LOFD-002005 / TDLOFD-002005
YES
No
None
NO
No
None
Indicates the power usage threshold of a simulated load configuration. If the power usage of a NO cell is below this threshold, the simulated load scheduling is performed. Indicates the reporting period for simulated load. The NO value 0 indicates that simulated load is not reported. Indicates the measurement period for simulated load. The value 0 NO indicates that simulated load is not measured. Indicates the switch that is used to control whether to enable and disable the frequencyselective scheduling in simulated load configuration. If the NO switch is set to ON, the frequencyselective scheduling is enabled. If the switch is set to OFF, the frequencydiversity scheduling is used. Indicates whether to enable or disable NO the TCP ACK control algorithm.
NO
No
None
NO
No
None
NO
No
None
NO
No
None
NO
No
LBFD-002008 / TDLBFD-002008
Indicates the maximum downlink throughput for the NO TCP ACK control algorithm.
NO
No
LBFD-002008 / TDLBFD-002008
Indicates the timer length for the TCP ACK control algorithm. This timer can be used to control traffic of NO the ACKs to uplink TCP packets, therefore preventing traffic bursts in the downlink.
NO
No
LBFD-002008 / TDLBFD-002008
Indicates the time delay of the frame start time for all TDD E-UTRAN NO cells under the eNodeB to the time of the reference clock.
NO
No
None
Indicates the number of ports that NO enable TCP acceleration. Indicates port 1 to which TPE is to be applied. Indicates port 2 to which TPE is to be applied. Indicates port 3 to which TPE is to be applied. Indicates port 4 to which TPE is to be applied. NO
NO
No
LOFD-001026 / TDLOFD-001028
NO
No
LOFD-001026 / TDLOFD-001028
NO
NO
No
LOFD-001026 / TDLOFD-001028
NO
NO
No
LOFD-001026 / TDLOFD-001028
NO
NO
No
LOFD-001026 / TDLOFD-001028
Indicates port 5 to which TPE is to be applied. Indicates port 6 to which TPE is to be applied. Indicates port 7 to which TPE is to be applied. Indicates port 8 to which TPE is to be applied. Indicates port 9 to which TPE is to be applied.
NO
NO
No
LOFD-001026 / TDLOFD-001028
NO
NO
No
LOFD-001026 / TDLOFD-001028
NO
NO
No
LOFD-001026 / TDLOFD-001028
NO
NO
No
LOFD-001026 / TDLOFD-001028
NO
NO
No
LOFD-001026 / TDLOFD-001028
Indicates port 10 to which TPE is to be NO applied. Indicates port 11 to which TPE is to be NO applied. Indicates port 12 to which TPE is to be NO applied. Indicates port 13 to which TPE is to be NO applied. Indicates port 14 to which TPE is to be NO applied. Indicates port 15 to which TPE is to be NO applied. Indicates port 16 to which TPE is to be NO applied. Indicates port 17 to which TPE is to be NO applied.
NO
No
LOFD-001026 / TDLOFD-001028
NO
No
LOFD-001026 / TDLOFD-001028
NO
No
LOFD-001026 / TDLOFD-001028
NO
No
LOFD-001026 / TDLOFD-001028
NO
No
LOFD-001026 / TDLOFD-001028
NO
No
LOFD-001026 / TDLOFD-001028
NO
No
LOFD-001026 / TDLOFD-001028
NO
No
LOFD-001026 / TDLOFD-001028
Indicates port 18 to which TPE is to be NO applied. Indicates port 19 to which TPE is to be NO applied. Indicates port 20 to which TPE is to be NO applied.
NO
No
LOFD-001026 / TDLOFD-001028
NO
No
LOFD-001026 / TDLOFD-001028
NO
No
LOFD-001026 / TDLOFD-001028
Indicates the mapping identifier.
YES
YES
No
LOFD-002004 / TDLOFD-002004
Indicates the type of the peer device, which can be an SNO GW or a neighboring eNodeB. Indicates whether to use one transmission resource group for all S-GWs or neighboring eNodeBs. If this parameter is set to YES, the eNodeB uses one transmission resource group for NO all S-GWs or all neighboring eNodeBs. If this parameter is set to NO, the eNodeB uses a unique transmission resource group for each S-GW or each neighboring eNodeB.
YES
No
LOFD-002004 / TDLOFD-002004
YES
No
LOFD-002004 / TDLOFD-002004
Indicates the ID of the peer device, which can be an SGW or neighboring eNodeB. If the peer device is an S-GW, this parameter must be set to the S-GW NO ID. If the peer device is a neighboring eNodeB, this parameter must be set to the neighboring eNodeB ID.
NO
No
LOFD-002004 / TDLOFD-002004
Indicates the cabinet number of the target transmission resource group. Indicates the subrack number of the target transmission resource group.
NO
NO
No
LOFD-002004 / TDLOFD-002004
NO
NO
No
LOFD-002004 / TDLOFD-002004
Indicates the slot number of the target NO transmission resource group.
YES
No
LOFD-002004 / TDLOFD-002004
Indicates the bear type of the transmission resource group.
NO
YES
No
LOFD-002004 / TDLOFD-002004
Indicates the ID of the target transmission resource group.
NO
YES
No
LOFD-002004 / TDLOFD-002004
Indicates the type of sub-board on the board where a NO transmission resource group is established.
YES
No
LOFD-002004 / TDLOFD-002004
Indicates the number of the port where a transmission resource group is carried.
NO
NO
No
LOFD-002004 / TDLOFD-002004
Indicates the type of port where a transmission NO resource group is carried.
YES
No
LOFD-002004 / TDLOFD-002004
Indicates the name of the SON security YES parameter group.
YES
No
Indicates the ID of the IKE proposal.
NO
YES
No
Indicates the name of the IPSec NO proposal.
YES
No
Indicates the application type of the SON security parameter group.
NO
NO
No
Indicates the IKE protocol version.
NO
NO
No
Indicates the exchange mode of IKEv1. There are two exchange modes: main mode and aggressive mode. In main mode, keys are exchanged separately from identity information. This protects identity information and hence enhances security. The aggressive NO mode does not protect identity information, but is useful in some network environments. If the IKE proposal uses the preshared key (PSK) authentication method, the fully qualified domain name (FQDN) is supported in main mode but not in aggressive mode. Indicates the preshared key. Both ends must use the NO same preshared key in negotiation.
NO
No
YES
No
Indicates whether to enable the dead NO peer detection (DPD) function.
NO
No
Indicates the dead peer detection (DPD) idle time. If the local end does not receive encrypted packets for a time defined by this parameter, it sends a DPD message to perform NO dead peer detection. However, the exact time at which the eNodeB sends DPD messages varies depending on network environment. Indicates the interval at which the eNodeB sends DPD frames. However, the exact interval at NO which the eNodeB sends DPD frames varies depending on network environment. Indicates the maximum allowed number of DPD frame retransmissions after a dead peer detection (DPD) failure.
NO
No
NO
No
NO
NO
No
Indicates the perfect forward secrecy (PFS) value. In the second phase of IPSec negotiation, PFS enables the eNodeB to use a key that is not derived from the first-phase key, ensuring that the two keys are independent of each other. According to PFS, each key protects a unique set of data. NO The elements used to generate a key are not reusable, preventing the disclosure of a key from affecting security of other keys. If the parameter is set to PFS_GROUP1 or PFS_GROUP2 at the local eNodeB, the peer device must launch a PFS exchange when initiating IPSec negotiation. During Indicates the application mode of the IPSec SA lifetime. The value GLOBAL indicates that this lifetime applies to all IPSec SAs of the eNodeB, while the value NO LOCAL indicates that this lifetime applies only to the IPSec SAs generated using the IPSec proposal specified in the same MO.
NO
No
NO
No
Indicates the lifetime of an IPSec SA. An IPSec SA becomes invalid if its lifetime elapses. Before an IPSec SA becomes invalid, IKE establishes a new IPSec SA through negotiation. Before a new IPSec SA is established, the old IPSec SA is still used to ensure communication NO security. Once the negotiation is complete, the new IPSec SA is immediately used. IPSec SA negotiation takes some time. To prevent SA updates from affecting communication security, a lifetime longer than 900 seconds is recommended. Indicates the effective traffic of the IPSec policy specified in the same MO.
NO
No
NO
NO
No
NO
YES
No
Indicates the ID of the IPv6 MME.
YES
YES
No
LOFD-002004 / TDLOFD-002004
Indicates the first signaling IPv6 address of the IPv6 MME, which is to be used as the first NO peer IPv6 address for an automatically set up IPv6 SCTP link on the S1 interface.
YES
No
LOFD-002004 / TDLOFD-002004
Indicates whether to enable automatic setup of an IPv6 IPSec tunnel between the eNodeB and the SeGW to protect NO data transmission on the IPv6 SCTP link that is set up using the first signaling IPv6 address of the IPv6 MME.
NO
No
Indicates the name of the IPv6 IKE peer that performs IPv6 IKE negotiation with NO the eNodeB when SIGIP1SECFLAG is set to ENABLE.
NO
No
Indicates the name of the IPSec proposal used when SIGIP1SECFLAG is set to ENABLE. This IPv6 IPSec NO proposal is required for IPv6 IPSec negotiation between the IPv6 MME and the eNodeB.
NO
No
Indicates the second signaling IPv6 address of the IPv6 MME, which is to be used as the NO second peer IPv6 address for an automatically set up IPv6 SCTP link on the S1 interface.
NO
No
Indicates whether to enable automatic setup of an IPv6 IPSec tunnel between the eNodeB and the SeGW to protect NO data transmission on the IPv6 SCTP link that is set up using the second signaling IPv6 address of the IPv6 MME.
NO
No
Indicates the name of the IPv6 IKE peer that performs IPv6 IKE negotiation with NO the eNodeB when SIGIP2SECFLAG is set to ENABLE.
NO
No
Indicates the name of the IPSec proposal used when SIGIP2SECFLAG is set to ENABLE. This IPv6 IPSec NO proposal is required for IPv6 IPSec negotiation between the IPv6 MME and the eNodeB.
NO
No
Indicates the local port number of the IPv6 MME, which is to be used as the peer port number NO for an automatically set up IPv6 SCTP link on the S1 interface. Indicates the description of the MME6. NO
YES
No
LOFD-002004 / TDLOFD-002004
NO
No
LOFD-002004
Indicates the ID of the operator that owns the IPv6 MME.
NO
NO
No
LOFD-002004 / TDLOFD-002004
Indicates the compliance protocol release of the MME. The value of this parameter must be the same as the actual compliance protocol release of the MME. The eNodeB sends S1 messages complying with the protocol release NO specified by this parameter. If the parameter value is different from the actual compliance protocol release of the MME, the way in which the MME handles these message is subject to the MME implementation.
NO
No
Indicates the MME ID.
YES
YES
No
LOFD-002004 / TDLOFD-002004
Indicates the first signaling IP address of the MME, which is to be used as the NO first peer IP address for an automatically set up SCTP link on the S1 interface.
YES
No
LOFD-002004 / TDLOFD-002004
Indicates whether to enable automatic setup of an IPSec tunnel between the eNodeB and the SeGW to protect NO data transmission on the SCTP link that is set up using the first signaling IP address of the MME.
NO
No
Indicates the name of the SeGW between which and the eNodeB an IPSec tunnel can be automatically set up for the SCTP link NO using the first signaling IP address of the MME. The SeGW performs IKE negotiation with the eNodeB.
NO
No
Indicates the name of the IPSec proposal used when FIRSTIPSECFLAG is set to ENABLE. NO This IPSec proposal is required for IPSec negotiation between the MME and the eNodeB.
NO
No
Indicates the second signaling IP address of the MME, which is to be used as the second NO peer IP address for an automatically set up SCTP link on the S1 interface.
NO
No
LOFD-002004 / TDLOFD-002004
Indicates whether to enable automatic setup of an IPSec tunnel between the eNodeB and the SeGW to protect NO data transmission on the SCTP link that is set up using the second signaling IP address of the MME.
NO
No
Indicates the name of the SeGW between which and the eNodeB an IPSec tunnel can be automatically set up for the SCTP link NO using the second signaling IP address of the MME. The SeGW performs IKE negotiation with the eNodeB.
NO
No
Indicates the name of the IPSec proposal used when SECIPSECFLAG is set to ENABLE. NO This IPSec proposal is required for IPSec negotiation between the MME and the eNodeB.
NO
No
Indicates the local port number of the MME, which is to be used as the peer NO port number for an automatically set up SCTP link on the S1 interface.
YES
No
LOFD-002004 / TDLOFD-002004
Indicates the description of the MME.
NO
NO
No
LOFD-002004 / TDLOFD-002004
Indicates the ID of the operator that owns the MME.
NO
NO
No
LOFD-002004 / TDLOFD-002004
Indicates the compliance protocol release of the MME. The value of this parameter must be the same as the actual compliance protocol release of the MME. The eNodeB sends S1 messages complying with the protocol release NO specified by this parameter. If the parameter value is different from the actual compliance protocol release of the MME, the way in which the MME handles these message is subject to the MME implementation. Indicates the cabinet number of the board where the NO S1 service IP address is located. Indicates the subrack number of the board where the NO S1 service IP address is located. Indicates the slot number of the board where the S1 NO service IP address is located.
NO
No
LOFD-002004 / TDLOFD-002004
NO
No
LOFD-002004 / TDLOFD-002004
NO
No
LOFD-002004 / TDLOFD-002004
YES
No
LOFD-002004 / TDLOFD-002004
Indicates the ID of the S1 service IP address.
YES
YES
No
LOFD-002004 / TDLOFD-002004
Indicates the S1 service IP address of the eNodeB, which is to be used as the local IP NO address for an automatically set up IP path on an S1 interface.
YES
No
LOFD-002004 / TDLOFD-002004
Indicates whether to enable automatic setup of an IPSec tunnel between the eNodeB and the SeGW to protect NO data transmission on the IP path that is set up using the S1 service IP address of the eNodeB.
NO
No
Indicates the local IP address used when IPSECFLAG is set to ENABLE. NO The eNodeB uses this IP address in IKE negotiation with a peer device.
NO
No
Indicates whether to enable the PING detection to check the connectivity of an automatically set up IP path.If the PING detection is disabled in the firewall located in the transport network or in the CN equipment, a NO detection failure is resulted, which will cause the reestablishment of the S1 interface and disrupt services in the cell. Therefore, this parameter must be set to DISABLE under such scenarios.
NO
No
LOFD-002004 / TDLOFD-002004
NO
NO
No
LOFD-002004 / TDLOFD-002004
Indicates the ID of the S1 service IPv6 YES address.
YES
No
LOFD-002004 / TDLOFD-002004
Indicates the cabinet number of the board where the NO S1 service IP address is located. Indicates the subrack number of the board where the NO S1 service IPv6 address is located. Indicates the slot number of the board where the S1 NO service IPv6 address is located.
NO
No
LOFD-002004 / TDLOFD-002004
NO
No
LOFD-002004 / TDLOFD-002004
YES
No
LOFD-002004 / TDLOFD-002004
Indicates the S1 service IPv6 address of the eNodeB, which is to be used as the local NO IPv6 address for an automatically set up IPv6 path on an S1 interface.
YES
No
LOFD-002004 / TDLOFD-002004
Indicates whether to enable automatic setup of an IPv6 IPSec tunnel between the eNodeB and the SeGW to protect NO data transmission on the IPv6 path that is set up using the S1 service IPv6 address of the eNodeB.
NO
No
Indicates the local IPv6 address used when SERVIPSECFLAG is set to ENABLE. NO The eNodeB uses this IPv6 address in IPv6 IKE negotiation with a peer device.
NO
No
Indicates whether to enable the PING detection check the connectivity of an automatically set up IPv6 path.If the PING detection is disabled in the firewall located in the transport network or in the CN equipment, a NO detection failure is resulted, which will cause the reestablishment of the S1 interface and disrupt services in the cell. Therefore, this parameter must be set to DISABLE under such scenarios.
NO
No
Indicates the ID of the operator that NO owns the S1 service IPv6 address.
NO
No
LOFD-002004 / TDLOFD-002004
Indicates the cabinet number of the board where the NO S1 signaling IP address is located. Indicates the subrack number of the board where the NO S1 signaling IP address is located. Indicates the slot number of the board where the S1 NO signaling IP address is located. Indicates the ID of the S1 signaling IP address.
NO
No
LOFD-002004 / TDLOFD-002004
NO
No
LOFD-002004 / TDLOFD-002004
YES
No
LOFD-002004 / TDLOFD-002004
YES
YES
No
LOFD-002004 / TDLOFD-002004
Indicates the first S1 signaling IP address of the eNodeB, which is to be used as the first NO local IP address for an automatically set up SCTP link on an S1 interface.
YES
No
LOFD-002004 / TDLOFD-002004
Indicates whether to enable automatic setup of an IPSec tunnel between the eNodeB and the SeGW to protect NO data transmission on the SCTP link that is set up using the first S1 signaling IP address of the eNodeB.
NO
No
Indicates the first local IP address used when LOCIPSECFLAG is set to ENABLE. The NO eNodeB uses this IP address in IKE negotiation with a peer device.
NO
No
Indicates the second S1 signaling IP address of the eNodeB, which is to be used as the NO second local IP address for an automatically set up SCTP link on an S1 interface.
NO
No
LOFD-002004 / TDLOFD-002004
Indicates whether to enable automatic setup of an IPSec tunnel between the eNodeB and the SeGW to protect NO data transmission on the SCTP link that is set up using the second S1 signaling IP address of the eNodeB.
NO
No
Indicates the second local IP address used when SECIPSECFLAG is set to ENABLE. The NO eNodeB uses this IP address in IKE negotiation with a peer device.
NO
No
Indicates the SCTP port number of the eNodeB, which is to be used as the local NO SCTP port number for an automatically set up SCTP link on an S1 interface.
YES
No
LOFD-002004 / TDLOFD-002004
Indicates the minimum value of the retransmission timeout (RTO). According to the SCTP protocol, if the calculated RTO is less than this NO parameter value, the round trip delay is set to this parameter value to reduce the probability of retransmission timeout. Indicates the maximum value of the retransmission timeout (RTO). According to the SCTP protocol, it is NO the upper limit for the doubling operation of the retransmission timeout timer. Indicates the initial value of the Retransmission TimeOut (RTO). It is used as the initial NO value when calculating the retransmission timeout in the SCTP protocol.
NO
No
LOFD-002004 / TDLOFD-002004
NO
No
LOFD-002004 / TDLOFD-002004
NO
No
LOFD-002004 / TDLOFD-002004
For details about the RtoAlpha parameter, see RFC4960. Indicates the value of RtoAlpha. It is used as smooth factor of the round-trip delay calculation in the NO SCTP protocol. In a new estimation, (RtoAlpha/100) is taken from a new measurement, and 1-(RtoAlpha/100) is taken from the last estimation. For details about the RtoBeta parameter, see RFC4960. Indicates the value of RtoBeta. It is used as smooth factor of the round-trip delay calculation in the NO SCTP protocol. In a new estimation, (RtoAlpha/100) is taken from the offset gain, and 1(RtoBeta/100) is taken from the last estimation.
NO
No
LOFD-002004 / TDLOFD-002004
NO
No
LOFD-002004 / TDLOFD-002004
Indicates the heartbeat interval, corresponding to the HBINTER parameter specified in RFC4960. SCTP periodically transmits heartbeat messages to an idle destination address to detect the NO reachability. According to RFC4960, the actual interval at which heartbeat messages are transmitted equals the parameter value (HBINTER) plus the retransmission timeout (RTO). Indicates the maximum number of retransmissions on the SCTP link. If the number of retransmissions on the SCTP link NO reaches this parameter value, this SCTP link is considered broken and the eNodeB reports a link failure alarm. Indicates the maximum number of retransmissions over a path. When the number of retransmissions over a path exceeds the value of this parameter, the path NO is regarded as failed if no heartbeat acknowledgment is received. If multiple paths are used, path switching is automatically performed.
NO
No
LOFD-002004 / TDLOFD-002004
NO
No
LOFD-002004 / TDLOFD-002004
NO
No
LOFD-002004 / TDLOFD-002004
Indicates whether to calculate the checksum of each message to be transmitted. If this parameter is set to ENABLE, the eNodeB calculates the checksum. If the NO calculated checksum is different from that contained in the message, the local eNodeB does not transmit the message. Indicates whether to calculate the checksum of each received message. If this parameter is set to ENABLE, the eNodeB calculates the checksum. If the NO calculated checksum is different from that contained in the message, the local eNodeB discards the message. Indicates the type of the checksum NO calculation. Indicates whether to switch back to the primary path upon restoration of the NO automatically set up SCTP link on the S1 interface.
NO
No
LOFD-002004 / TDLOFD-002004
NO
No
LOFD-002004 / TDLOFD-002004
NO
No
LOFD-002004 / TDLOFD-002004
NO
No
LOFD-002004 / TDLOFD-002004
Indicates the number of consecutive heartbeat messages that must be transmitted on the primary path before the eNodeB NO can switch back to the primary path. This parameter is valid only when SWITCHBACKFLA G is set to ENABLE. Indicates the time interval that one end of SCPT link has to wait before it can send an SACK message in response to data reception. A larger NO value of this parameter indicates a longer time interval between the reception of data and the sending of the corresponding SACK message.
NO
No
LOFD-002004 / TDLOFD-002004
NO
No
LOFD-002004 / TDLOFD-002004
Indicates the ID of the operator that owns the S1 signaling IP address.
NO
NO
No
LOFD-002004 / TDLOFD-002004
Indicates the ID of the S1 signaling IPv6 address.
YES
YES
No
LOFD-002004 / TDLOFD-002004
Indicates the cabinet number of the board where the NO S1 signaling IPv6 address is located.
NO
No
LOFD-002004 / TDLOFD-002004
Indicates the slot number of the board where the S1 NO signaling IPv6 address is located. Indicates the slot number of the board where the S1 NO signaling IPv6 address is located.
NO
No
LOFD-002004 / TDLOFD-002004
YES
No
LOFD-002004 / TDLOFD-002004
Indicates the first S1 signaling IPv6 address of the eNodeB, which is to be used as the first NO local IPv6 address for an automatically set up IPv6 SCTP link on an S1 interface.
YES
No
LOFD-002004 / TDLOFD-002004
Indicates whether to enable automatic setup of an IPv6 IPSec tunnel between the eNodeB and the SeGW to protect NO data transmission on the IPv6 SCTP link that is set up using the first S1 signaling IPv6 address of the eNodeB.
NO
No
Indicates the first local IPv6 address used when SIGIP1SECFLAG is set to ENABLE. The NO eNodeB uses this IPv6 address in IPv6 IKE negotiation with a peer device.
NO
No
Indicates the second S1 signaling IPv6 address of the eNodeB, which is to be used as the NO second local IPv6 address for an automatically set up IPv6 SCTP link on an S1 interface.
NO
No
Indicates whether to enable automatic setup of an IPv6 IPSec tunnel between the eNodeB and the SeGW to protect NO data transmission on the IPv6 SCTP link that is set up using the second S1 signaling IPv6 address of the eNodeB.
NO
No
Indicates the second local IPv6 address used when SIGIP2SECFLAG is set to ENABLE. The NO eNodeB uses this IPv6 address in IPv6 IKE negotiation with a peer device.
NO
No
Indicates the SCTP port number of the eNodeB, which is to be used as the local SCTP port number NO for an automatically set up IPv6 SCTP link on an S1 interface. Indicates the minimum retransmission timeout (RTO) value of an IPv6 SCTP link. The time that a NO link connectivity check takes has a positive correlation with the value of this parameter. Indicates the maximum RTO value of an IPv6 SCTP link. The time that a link NO connectivity check takes has a positive correlation with the value of this parameter. Indicates the initial RTO value of an IPv6 SCTP link. The time that a link connectivity check NO takes has a positive correlation with the value of this parameter. Indicates the Alpha value for RTO for an IPv6 SCTP link. A larger value of this parameter NO indicates a lower sensitivity of the IPv6 SCTP link to the time delay. For details, see RFC4960.
YES
No
LOFD-002004
NO
No
LOFD-002004 / TDLOFD-002004
NO
No
LOFD-002004 / TDLOFD-002004
NO
No
LOFD-002004 / TDLOFD-002004
NO
No
LOFD-002004 / TDLOFD-002004
Indicates the Beta value for RTO for an IPv6 SCTP link. A larger value of this parameter NO indicates a lower sensitivity of the IPv6 SCTP link to the time delay. For details, see RFC4960. Indicates the heartbeat interval of the IPv6 SCTP link. The status of an IPv6 SCTP link is checked by each end sending heartbeat messages to the other end. If one end receives one heartbeat acknowledgment, then it considers the IPv6 SCTP link as NO connected. However, if one end has transmitted heartbeat messages for a number greater than the MAXASSOCRETR value but has not received any heartbeat acknowledgments, then it considers the IPv6 SCTP link as broken.
NO
No
LOFD-002004 / TDLOFD-002004
NO
No
LOFD-002004 / TDLOFD-002004
Indicates the maximum number of retransmissions over an IPv6 SCTP link. If this IPv6 SCTP link has multiple paths, then this IPv6 SCTP link is also called an IPv6 SCTP association and this parameter indicates the maximum number of NO retransmissions over an IPv6 SCTP association. When the number of retransmissions on the association exceeds the value of this parameter, the eNodeB considers the IPv6 SCTP link as broken and reports a link failure alarm. Indicates the maximum number of retransmissions over a path. If the number of retransmissions over a path exceeds the value of this parameter but no NO response message is received, the eNodeB considers this path as unreachable, and switches to another path if multihoming is used.
NO
No
LOFD-002004 / TDLOFD-002004
NO
No
LOFD-002004 / TDLOFD-002004
Indicates whether to calculate the checksum of each message to be transmitted. If the calculated checksum of a message is different NO from the checksum contained in the message, the eNodeB considers this message to have bit errors and does not transmit the message. Indicates whether to check the NO checksum of each received message. Indicates the checksum calculation algorithm. NO
NO
No
LOFD-002004 / TDLOFD-002004
NO
No
LOFD-002004 / TDLOFD-002004
NO
No
LOFD-002004 / TDLOFD-002004
Indicates whether to switch back to the primary path when the primary path is restored. When the primary path is unreachable, the eNodeB switches to NO the secondary path. This parameter is used to set whether the eNodeB switches back to the primary path when the primary path is restored.
NO
No
LOFD-002004 / TDLOFD-002004
Indicates the number of consecutive heartbeat response messages that must be detected over the primary path of an IPv6 SCTP link before the eNodeB can switch back to this primary path. NO After the primary path is restored and the number of consecutive heartbeat response messages reaches the value of this parameter, the eNodeB switches back to the primary path.
NO
No
LOFD-002004 / TDLOFD-002004
Indicates the ID of the operator that owns the S1 signaling IPv6 address.
NO
NO
No
LOFD-002004 / TDLOFD-002004
Indicates the ID of the service gateway (S-GW). A maximum of 128 SYES GWs can establish S1 user plane connections with each eNodeB.
YES
No
LOFD-002004 / TDLOFD-002004
Indicates the first service IP address of the S-GW, which is to be used in NO automatic setup of an IP Path on the S1 interface.
YES
No
LOFD-002004 / TDLOFD-002004
Indicates whether to enable automatic setup of an IPSec tunnel between the eNodeB and the SeGW to protect NO data transmission on the IP path that is set up using the first service IP address of the SGW.
NO
No
Indicates the name of the SeGW used when SERVIP1IPSECFL AG is set to NO ENABLE. The SeGW performs IKE negotiation with the eNodeB.
NO
No
Indicates the name of the IPSec proposal used when SERVIP1IPSECFL AG is set to ENABLE. This NO IPSec proposal is required for IPSec negotiation between the S-GW and the eNodeB.
NO
No
Indicates the second service IP address of the SGW, which is to be NO used in automatic setup of an IP Path on the S1 interface.
NO
No
LOFD-002004 / TDLOFD-002004
Indicates whether to enable automatic setup of an IPSec tunnel between the eNodeB and the SeGW to protect NO data transmission on the IP path that is set up using the second service IP address of the SGW.
NO
No
NO
No
NO
No
Indicates the third service IP address of the S-GW, which is to be used in NO automatic setup of an IP Path on the S1 interface.
NO
No
LOFD-002004 / TDLOFD-002004
Indicates whether to enable automatic setup of an IPSec tunnel between the eNodeB and the SeGW to protect NO data transmission on the IP path that is set up using the third service IP address of the SGW.
NO
No
NO
No
NO
No
Indicates the fourth service IP address of the S-GW, which is to be used in NO automatic setup of an IP Path on the S1 interface.
NO
No
LOFD-002004 / TDLOFD-002004
Indicates whether to enable automatic setup of an IPSec tunnel between the eNodeB and the SeGW to protect NO data transmission on the IP path that is set up using the fourth service IP address of the SGW.
NO
No
NO
No
NO
No
Indicates the description of the SGW.
NO
NO
No
LOFD-002004 / TDLOFD-002004
Indicates the ID of the operator that owns the S-GW.
NO
NO
No
LOFD-002004 / TDLOFD-002004
Indicates the ID of the IPv6 S-GW.
YES
YES
No
LOFD-002004 / TDLOFD-002004
Indicates the first service IPv6 address of the IPv6 S-GW, which is to NO be used in automatic setup of an IP path on the S1 interface.
YES
No
LOFD-002004 / TDLOFD-002004
Indicates whether to enable automatic setup of an IPv6 IPSec tunnel between the eNodeB and the SeGW to protect NO data transmission on the IPv6 path that is set up using the first service IPv6 address of the IPv6 S-GW.
NO
No
Indicates the name of the security gateway (SeGW) of the serving gateway (S-GW), which performs IKE negotiation with the NO local eNodeB. This parameter is valid only when SERVIP1IPSECFL AG is set to ENABLE.
NO
No
Indicates the name of the IP security (IPsec) proposal, which is required for IPsec negotiation between the S-GW and the local NO eNodeB. This parameter is valid only when SERVIP1IPSECFL AG is set to ENABLE.
NO
No
Indicates the second service IPv6 address of the IPv6 S-GW, which is to NO be used in automatic setup of an IPv6 path on the S1 interface.
NO
No
LOFD-002004 / TDLOFD-002004
Indicates whether to enable automatic setup of an IPv6 IPSec tunnel between the eNodeB and the SeGW to protect NO data transmission on the IPv6 path that is set up using the second service IPv6 address of the IPv6 S-GW.
NO
No
Indicates the name of the SeGW used when SERVIP2IPSECFL AG is set to NO ENABLE. The SeGW performs IPv6 IKE negotiation with the eNodeB.
NO
No
NO
No
Indicates the third service IPv6 address of the IPv6 S-GW, which is to NO be used in automatic setup of an IPv6 path on the S1 interface.
NO
No
LOFD-002004 / TDLOFD-002004
Indicates whether to enable automatic setup of an IPv6 IPSec tunnel between the eNodeB and the SeGW to protect NO data transmission on the IPv6 path that is set up using the third service IPv6 address of the IPv6 S-GW.
NO
No
NO
No
NO
No
Indicates the fourth service IPv6 address of the IPv6 S-GW, which is to NO be used in automatic setup of an IPv6 path on the S1 interface.
NO
No
LOFD-002004 / TDLOFD-002004
Indicates whether to enable automatic setup of an IPv6 IPSec tunnel between the eNodeB and the SeGW to protect NO data transmission on the IPv6 path that is set up using the fourth service IPv6 address of the IPv6 S-GW.
NO
No
NO
No
NO
No
Indicates the description of the SGW6. Indicates the ID of the operator that owns the IPv6 SGW, by which the eNodeB identifies this IPv6 S-GW.
NO
NO
No
NO
NO
No
LOFD-002004 / TDLOFD-002004
Indicates the cabinet number of the board where the NO X2 service IP address is located.
NO
No
LOFD-002004 / TDLOFD-002004
Indicates the subrack number of the board where the NO X2 service IP address is located. Indicates the slot number of the board where the X2 NO service IP address is located. Indicates the ID of the X2 service IP address.
NO
No
LOFD-002004 / TDLOFD-002004
YES
No
LOFD-002004 / TDLOFD-002004
YES
YES
No
LOFD-002004 / TDLOFD-002004
Indicates the X2 service IP address of the local eNodeB, which is to be used as the local IP NO address for an automatically set up IP path on an X2 interface.
YES
No
LOFD-002004 / TDLOFD-002004
Indicates whether to enable automatic setup of an IPSec tunnel between the local eNodeB and a neighboring eNodeB to protect NO data transmission on the IP path that is set up using the X2 service IP address of the local eNodeB. Indicates whether to enable the local eNodeB to perform IPSec negotiation with the neighboring eNodeB through an SeGW when IPSECFLAG is set to ENABLE. If this parameter is set to DISABLE, the local NO eNodeB directly negotiates with the neighboring eNodeB. If this parameter is set to ENABLE, the local eNodeB negotiates with the neighboring eNodeB through an SeGW.
NO
No
NO
No
Indicates the local IP address used when IPSECFLAG is set to ENABLE. NO The local eNodeB uses this IP address in IKE negotiation with a peer device.
NO
No
Indicates the name of the SeGW used when IPSECFLAG and SEGWFLAG are both set to NO ENABLE. The SeGW performs IKE negotiation with the local eNodeB.
NO
No
LOFD-002004 / TDLOFD-002004
Indicates the name of the IPSec proposal used when IPSECFLAG and SEGWFLAG are both set to ENABLE. This NO IPSec proposal is required for IPSec negotiation between the local eNodeB and a neighboring eNodeB through the SeGW.
NO
No
Indicates whether to enable Ping detection to check the connectivity of an automatically set up IP path. If the neighboring eNodeB or the NO firewall in the transport network is configured to block Ping packets, set this parameter to disable Ping detection. Otherwise, Ping detection fails.
NO
No
LOFD-002004 / TDLOFD-002004
NO
NO
No
LOFD-002004 / TDLOFD-002004
Indicates the cabinet number of the board where the NO X2 signaling IP address is located. Indicates the subrack number of the board where the NO X2 signaling IP address is located.
NO
No
LOFD-002004 / TDLOFD-002004
NO
No
LOFD-002004 / TDLOFD-002004
Indicates the slot number of the board where the X2 NO signaling IP address is located. Indicates the ID of the X2 signaling IP address.
YES
No
LOFD-002004 / TDLOFD-002004
YES
YES
No
LOFD-002004 / TDLOFD-002004
Indicates the first X2 signaling IP address of the local eNodeB, which is to be used as the first NO local IP address for an automatically set up SCTP link on an X2 interface.
YES
No
LOFD-002004 / TDLOFD-002004
Indicates whether to enable automatic setup of an IPSec tunnel between the local eNodeB and a neighboring eNodeB to protect NO data transmission on the SCTP link that is set up using the first X2 signaling IP address of the local eNodeB.
NO
No
Indicates whether to enable the local eNodeB to perform IPSec negotiation with the neighboring eNodeB through an SeGW when FIRSTIPSECFLAG is set to ENABLE. If this parameter is set to DISABLE, the NO local eNodeB directly negotiates with the neighboring eNodeB. If this parameter is set to ENABLE, the local eNodeB negotiates with the neighboring eNodeB through an SeGW.
NO
No
Indicates the local IP address used when IPSECFLAG is set to ENABLE. NO The local eNodeB uses this IP address in IKE negotiation with a peer device.
NO
No
Indicates the name of the SeGW used when IPSECFLAG and SEGWFLAG are both set to NO ENABLE. This SeGW performs IKE negotiation with a neighboring eNodeB.
NO
No
Indicates the name of the IPSec proposal used when IPSECFLAG and SEGWFLAG are both set to ENABLE. This NO IPSec proposal is required for IPSec negotiation between the local eNodeB and a neighboring eNodeB through the SeGW.
NO
No
Indicates the second X2 signaling IP address of the local eNodeB, which is to be used NO as the second local IP address for an automatically set up SCTP link on an X2 interface.
NO
No
LOFD-002004 / TDLOFD-002004
Indicates whether to enable automatic setup of an IPSec tunnel between the local eNodeB and a neighboring eNodeB to protect NO data transmission on the SCTP link that is set up using the second X2 signaling IP address of the local eNodeB.
NO
No
Indicates whether to enable the local eNodeB to perform IPSec negotiation with the neighboring eNodeB through an SeGW when SECIPSECFLAG is set to ENABLE. If this parameter is set to DISABLE, the NO local eNodeB directly negotiates with the neighboring eNodeB. If this parameter is set to ENABLE, the local eNodeB negotiates with the neighboring eNodeB through an SeGW.
NO
No
Indicates the second local IP address used when SECIPSECFLAG is set to ENABLE. The NO local eNodeB uses this IP address in IKE negotiation with a peer device.
NO
No
LOFD-002004 / TDLOFD-002004
Indicates the name of the SeGW used when SECIPSECFLAG and SECSEGWFLAG NO are both set to ENABLE. The SeGW performs IKE negotiation with a neighboring eNodeB.
NO
No
Indicates the name of the IPSec proposal used when SECIPSECFLAG and SECSEGWFLAG are both set to NO ENABLE. This IPSec proposal is required for IPSec negotiation between the local eNodeB and the SeGW.
NO
No
Indicates the SCTP port number of the eNodeB, which is to be used as the local SCTP port number for an automatically set up SCTP link on an X2 interface. If NO the X2SonLinkSetupTy pe parameter in the GlobalProcSwitch MO is set to X2_OVER_S1, this parameter must be set to 36422.
NO
No
LOFD-002004 / TDLOFD-002004
Indicates the minimum Retransmission Timeout (RTO) value for the SCTP link. A smaller value of this parameter indicates a shorter NO time required to check link connectivity. The time required to check link connectivity is twice the sum of the new RTO and heartbeat Indicates the maximum RTO value of an SCTP link. A larger value NO indicates a longer period required for checking link connectivity. Indicates the initial value of the Retransmission TimeOut (RTO). It is used as the initial NO value when calculating the retransmission timeout in the SCTP protocol. Indicates the value of RtoAlpha. It is used as smooth factor of the roundtrip delay calculation in the SCTP protocol. In a NO new estimation, (RtoAlpha/100) is taken from a new measurement, and 1-(RtoAlpha/100) is taken from the last estimation.
NO
No
LOFD-002004 / TDLOFD-002004
NO
No
LOFD-002004 / TDLOFD-002004
NO
No
LOFD-002004 / TDLOFD-002004
NO
No
LOFD-002004 / TDLOFD-002004
Indicates the value of RtoBeta. It is used as smooth factor of the roundtrip delay calculation in the SCTP protocol. In a NO new estimation, (RtoBeta/100) is taken from the offset gain, and 1(RtoBeta/100) is taken from the last estimation. Indicates the heartbeat interval, corresponding to the HBInter parameter specified in RFC4960. SCTP periodically transmits heartbeat messages to an idle destination address to detect the NO reachability. According to RFC4960, the actual interval at which heartbeat messages are transmitted equals the parameter value (HBInter) plus the retransmission timeout (RTO). Indicates the maximum number of retransmissions on the SCTP link. If the number of retransmissions on the SCTP link NO reaches this parameter value, the eNodeB breaks this SCTP link and reports a link failure alarm.
NO
No
LOFD-002004 / TDLOFD-002004
NO
No
LOFD-002004 / TDLOFD-002004
NO
No
LOFD-002004 / TDLOFD-002004
Indicates the maximum number of retransmissions over a path. When the number of retransmissions over a path exceeds the value of this parameter, the path NO is regarded as failed if no heartbeat acknowledgment is received. If multiple paths are used, path switchover is automatically performed. Indicates whether to calculate the checksum of each message to be transmitted. If this parameter is set to ENABLE, the local eNodeB calculates the NO checksum. If the calculated checksum is different from that contained in the message, the local eNodeB does not transmit the message. Indicates whether to calculate the checksum of each received message. If this parameter is set to ENABLE, the local eNodeB calculates the NO checksum. If the calculated checksum is different from that contained in the message, the local eNodeB discards the message.
NO
No
LOFD-002004 / TDLOFD-002004
NO
No
LOFD-002004 / TDLOFD-002004
NO
No
LOFD-002004 / TDLOFD-002004
Indicates the type of the checksum NO calculation. Indicates whether to switch back to the primary path of an automatically set up SCTP link when the primary path is NO restored. When the primary path of an SCTP link becomes unreachable, the secondary path takes over. Indicates the number of consecutive heartbeat messages that must be transmitted on the primary path before the eNodeB NO can switch back to the primary path. This parameter is valid only when the SWITCHBACKFLA G parameter is set to ENABLE. Indicates the time interval that one end of SCTP link has to wait before it can send an SACK message in response to the reception of certain data. A larger value NO of this parameter indicates a longer time interval between the reception of data and the sending of the corresponding SACK message.
NO
No
LOFD-002004 / TDLOFD-002004
NO
No
LOFD-002004 / TDLOFD-002004
NO
No
LOFD-002004 / TDLOFD-002004
NO
No
LOFD-002004 / TDLOFD-002004
NO
NO
No
LOFD-002004 / TDLOFD-002004
Indicates the identifier of the X2eNodeB.
YES
YES
No
LOFD-002004 / TDLOFD-002004
Indicates the first signaling IP address of the neighboring eNodeB, which is to be used as the first NO peer IP address for an automatically set up SCTP link on the X2 interface.
YES
No
LOFD-002004 / TDLOFD-002004
Indicates whether to enable automatic setup of an IPSec tunnel between the local eNodeB and the neighboring eNodeB to protect NO data transmission on the SCTP link that is set up using the first signaling IP address of the neighboring eNodeB.
NO
No
Indicates whether to enable the neighboring eNodeB to perform IPSec negotiation with the local eNodeB through an SeGW when FIRSTIPSECFLAG is set to ENABLE. If this parameter is set to DISABLE, the NO neighboring eNodeB directly negotiates with the local eNodeB. If this parameter is set to ENABLE, the neighboring eNodeB negotiates with the local eNodeB through an SeGW.
NO
No
Indicates the first local IP address used when FIRSTIPSECFLAG is set to ENABLE. NO The neighboring eNodeB uses this IP address in IKE negotiation with the local eNodeB.
NO
No
Indicates the second signaling IP address of the neighboring eNodeB, which is to be used as the NO second peer IP address for an automatically set up SCTP link on the X2 interface.
NO
No
LOFD-002004 / TDLOFD-002004
Indicates whether to enable automatic setup of an IPSec tunnel between the local eNodeB and the neighboring eNodeB to protect NO data transmission on the SCTP link that is set up using the second signaling IP address of the neighboring eNodeB.
NO
No
Indicates whether the neighboring eNodeB is enabled to perform IPSec negotiation with the local eNodeB through an SeGW when SECIPSECFLAG is set to ENABLE. If this parameter is set to DISABLE, the NO neighboring eNodeB directly negotiates with the local eNodeB. If this parameter is set to ENABLE, the neighboring eNodeB negotiates with the local eNodeB through an SeGW. Indicates the second local IP address used when SECIPSECFLAG is set to ENABLE. The NO neighboring eNodeB uses this IP address in IKE negotiation with the local eNodeB.
NO
No
NO
No
Indicates the SCTP port number of the neighboring eNodeB, which is to be used as the peer SCTP port number for an automatically set up SCTP link on the X2 interface. If NO the X2SonLinkSetupTy pe parameter in the GlobalProcSwitch MO is set to X2_OVER_S1, this parameter must be set to 36422.
NO
No
LOFD-002004 / TDLOFD-002004
Indicates the first service IP address of the neighboring eNodeB, which is to NO be used in automatic setup of an IP path on the X2 interface.
NO
No
LOFD-002004 / TDLOFD-002004
Indicates whether to enable automatic setup of an IPSec tunnel between the local eNodeB and the neighboring eNodeB to protect NO data transmission on the IP path that is set up using the first service IP address of the neighboring eNodeB.
NO
No
Indicates whether the neighboring eNodeB is enabled to perform IPSec negotiation with the local eNodeB through an SeGW when SERVIP1IPSECFL AG is set to ENABLE. If this parameter is set to NO DISABLE, the neighboring eNodeB directly negotiates with the local eNodeB. If this parameter is set to ENABLE, the neighboring eNodeB negotiates with the local eNodeB through an SeGW.
NO
No
Indicates the first local IP address used when SERVIP1IPSECFL AG is set to ENABLE. The NO neighboring eNodeB uses this IP address in IKE negotiation with the local eNodeB.
NO
No
Indicates the second service IP address of the neighboring eNodeB, which is to NO be used in automatic setup of an IP path on the X2 interface.
NO
No
LOFD-002004 / TDLOFD-002004
Indicates whether to enable automatic setup of an IPSec tunnel between the local eNodeB and the neighboring eNodeB to protect NO data transmission on the IP path that is set up using the second service IP address of the neighboring eNodeB.
NO
No
NO
No
Indicates the second local IP address used when SERVIP2IPSECFL AG is set to ENABLE. The NO neighboring eNodeB uses this IP address in IKE negotiation with the local eNodeB.
NO
No
Indicates the third service IP address of the neighboring eNodeB, which is to NO be used in automatic setup of an IP path on the X2 interface.
NO
No
LOFD-002004 / TDLOFD-002004
Indicates whether to enable automatic setup of an IPSec tunnel between the local eNodeB and the neighboring eNodeB to protect NO data transmission on the IP path that is set up using the third service IP address of the neighboring eNodeB.
NO
No
NO
No
Indicates the third local IP address used when SERVIP3IPSECFL AG is set to ENABLE. The NO neighboring eNodeB uses this IP address in IKE negotiation with the local eNodeB.
NO
No
Indicates the fourth service IP address of the neighboring eNodeB, which is to NO be used in automatic setup of an IP path on the X2 interface.
NO
No
LOFD-002004 / TDLOFD-002004
Indicates whether to enable automatic setup of an IPSec tunnel between the local eNodeB and the neighboring eNodeB to protect NO data transmission on the IP path that is set up using the fourth service IP address of the neighboring eNodeB.
NO
No
NO
No
Indicates the fourth local IP address used when SERVIP4IPSECFL AG is set to ENABLE. The NO neighboring eNodeB uses this IP address in IKE negotiation with the local eNodeB.
NO
No
Indicates the mobile country code (MCC) of the neighboring NO eNodeB. An MCC consists of three digits. Indicates the mobile network code (MNC) of the neighboring NO eNodeB. An MNC consists of two or three digits.
NO
No
LOFD-002004 / TDLOFD-002004
NO
No
LOFD-002004 / TDLOFD-002004
Indicates the ID of the neighboring eNodeB. Indicates the description of the X2eNodeB. Indicates the ID of the operator that owns the neighboring eNodeB.
NO
NO
No
LOFD-002004 / TDLOFD-002004
NO
NO
No
LOFD-002004 / TDLOFD-002004
NO
NO
No
LOFD-002004 / TDLOFD-002004
Indicates the compliance protocol release of the NO neighboring eNodeB.
NO
No
LOFD-002004 / TDLOFD-002004
Indicates the ID of the X2 service IPv6 YES address.
YES
No
LOFD-002004 / TDLOFD-002004
Indicates the cabinet number of the board where the NO X2 service IPv6 address is located. Indicates the subrack number of the board where the NO X2 service IPv6 address is located. Indicates the slot number of the board where the X2 NO service IPv6 address is located.
NO
No
LOFD-002004 / TDLOFD-002004
NO
No
LOFD-002004 / TDLOFD-002004
YES
No
LOFD-002004 / TDLOFD-002004
Indicates the X2 service IPv6 address of the local eNodeB, which is to be used as the local NO IPv6 address for an automatically set up IPv6 path on an S1 interface.
YES
No
LOFD-002004 / TDLOFD-002004
Indicates whether to enable automatic setup of an IPv6 IPSec tunnel between the local eNodeB and a neighboring IPv6 NO eNodeB to protect data transmission on the IPv6 path that is set up using the X2 service IPv6 address of the local eNodeB.
NO
No
Indicates whether to enable the local eNodeB to perform IPv6 IPSec negotiation with the neighboring IPv6 eNodeB through an SeGW when SERVIPSECFLAG is set to ENABLE. If this parameter is set NO to DISABLE, the local eNodeB directly negotiates with the neighboring IPv6 eNodeB. If this parameter is set to ENABLE, the local eNodeB negotiates with the neighboring IPv6 eNodeB through an SeGW.
NO
No
Indicates the local IPv6 address used when IPSECFLAG is set to ENABLE. The local eNodeB NO uses this IPv6 address in IPv6 IKE negotiation with a peer device.
NO
No
Indicates the name of the IPv6 IKE peer used when SERVIPSECFLAG and SERVIPSECGWFL NO AG are both set to ENABLE. The IPv6 IKE peer performs IPv6 IKE negotiation with the local eNodeB.
NO
No
Indicates the name of the IPsec proposal used in IPsec negotiation between the local eNodeB and the security gateway NO (SeGW). This parameter is valid only when IPSECFLAG and SEGWFLAG are both set to ENABLE.
NO
No
Indicates whether to enable Ping detection to check the connectivity of an automatically set up IP path. If the neighboring eNodeB or the NO firewall in the transport network is configured to block Ping packets, set this parameter to disable Ping detection. Otherwise, Ping detection fails.
NO
No
Indicates the ID of the operator that NO owns the X2 service IPv6 address.
NO
No
LOFD-002004 / TDLOFD-002004
Indicates the ID of the X2 signaling IPv6 address.
YES
YES
No
LOFD-002004 / TDLOFD-002004
Indicates the cabinet number of the board where the NO X2 signaling IPv6 address is located.
NO
No
LOFD-002004 / TDLOFD-002004
Indicates the subrack number of the board where the NO X2 signaling IPv6 address is located. Indicates the slot number of the board where the X2 NO signaling IPv6 address is located.
NO
No
LOFD-002004 / TDLOFD-002004
YES
No
LOFD-002004 / TDLOFD-002004
Indicates the first X2 signaling IPv6 address of the local eNodeB, which is to be used as the first NO local IPv6 address for an automatically set up IPv6 SCTP link on an X2 interface.
YES
No
LOFD-002004 / TDLOFD-002004
Indicates whether to enable automatic setup of an IPv6 IPSec tunnel between the local eNodeB and a neighboring IPv6 eNodeB to protect NO data transmission on the IPv6 SCTP link that is set up using the first X2 signaling IPv6 address of the local eNodeB.
NO
No
Indicates whether to enable the local eNodeB to perform IPv6 IPSec negotiation with a neighboring IPv6 eNodeB through an SeGW when SIGIP1SECFLAG is set to ENABLE. If this parameter is set NO to DISABLE, the local eNodeB directly negotiates with the neighboring IPv6 eNodeB. If this parameter is set to ENABLE, the local eNodeB negotiates with the neighboring IPv6 eNodeB through an SeGW.
NO
No
Indicates the first local IPv6 address used when SIGIP1SECFLAG is set to ENABLE. The NO local eNodeB uses this IPv6 address in IPv6 IKE negotiation with a peer device.
NO
No
Indicates the name of the IPv6 IKE peer used when SIGIP1SECFLAG and SIGIP1SEGWFLAG NO are both set to ENABLE. This IPv6 IKE peer performs IPv6 IKE negotiation with a local IPv6 eNodeB.
NO
No
Indicates the name of the IPSec proposal used when SIGIP1SECFLAG and SIGIP1SEGWFLAG are both set to NO ENABLE. This IPv6 IPSec proposal is required for IPv6 IPSec negotiation between the local eNodeB and the IPv6 SeGW.
NO
No
Indicates the second X2 signaling IPv6 address of the local eNodeB, which is to be used NO as the second local IPv6 address for an automatically set up IPv6 SCTP link on an X2 interface.
NO
No
Indicates whether to enable automatic setup of an IPv6 IPSec tunnel between the local eNodeB and a neighboring IPv6 eNodeB to protect NO data transmission on the IPv6 SCTP link that is set up using the second X2 signaling IPv6 address of the local eNodeB. Indicates whether to enable the local eNodeB to perform IPv6 IPSec negotiation with a neighboring IPv6 eNodeB through an SeGW when SIGIP2SECFLAG is set to ENABLE. If this parameter is set NO to DISABLE, the local eNodeB directly negotiates with the neighboring IPv6 eNodeB. If this parameter is set to ENABLE, the local eNodeB negotiates with the neighboring IPv6 eNodeB through an SeGW.
NO
No
NO
No
Indicates the second local IPv6 address used when SIGIP2SECFLAG is set to ENABLE. The NO local eNodeB uses this IPv6 address in IPv6 IKE negotiation with a peer device.
NO
No
Indicates the name of the IPv6 IKE peer used when SIGIP2SECFLAG and SIGIP2SEGWFLAG are both set to NO ENABLE. This IPv6 IKE peer performs IPv6 IKE negotiation with a neighboring IPv6 eNodeB.
NO
No
Indicates the name of the IPSec proposal used when SIGIP2SECFLAG and SIGIP2SEGWFLAG are both set to NO ENABLE. This IPv6 IPSec proposal is required for IPv6 IPSec negotiation between the local eNodeB and the IPv6 SeGW.
NO
No
Indicates the SCTP port number of the local eNodeB, which is to be used as the local SCTP port number for an automatically set up IPv6 SCTP link on an X2 interface. If NO the X2SonLinkSetupTy pe parameter in the GLOBALPROCSWI TCH MO is set to X2_OVER_S1, this parameter must be set to 36422. Indicates the minimum retransmission timeout (RTO) value of an IPv6 SCTP link. The time that a NO link connectivity check takes has a positive correlation with the value of this parameter.
NO
No
LOFD-002004 / TDLOFD-002004
NO
No
LOFD-002004 / TDLOFD-002004
Indicates the maximum RTO value of an IPv6 SCTP link. The time that a link check NO takes has a positive correlation with the value of this parameter. Indicates the initial RTO value of an IPv6 SCTP link. The time that a link connectivity check NO takes has a positive correlation with the value of this parameter. Indicates the Alpha value for RTO for an IPv6 SCTP link. A larger value of this parameter NO indicates a lower sensitivity of the IPv6 SCTP link to the time delay. For details, see RFC4960. Indicates the Beta value for RTO for an IPv6 SCTP link. A larger value of this parameter NO indicates a lower sensitivity of the IPv6 SCTP link to the time delay. For details, see RFC4960.
NO
No
LOFD-002004 / TDLOFD-002004
NO
No
LOFD-002004 / TDLOFD-002004
NO
No
LOFD-002004 / TDLOFD-002004
NO
No
LOFD-002004 / TDLOFD-002004
Indicates the heartbeat interval of the IPv6 SCTP link. The status of an IPv6 SCTP link is checked by each end sending heartbeat messages to the other end. If one end receives one heartbeat acknowledgment, then it considers the IPv6 SCTP link as NO connected. However, if one end has transmitted heartbeat messages for a number equal to the MAXASSOCRETR value but has not received any heartbeat acknowledgments, then it considers the IPv6 SCTP link as broken.
NO
No
LOFD-002004 / TDLOFD-002004
Indicates the maximum number of retransmissions over an IPv6 SCTP link. If this IPv6 SCTP link has multiple paths, then this IPv6 SCTP link is also called an IPv6 SCTP association and this parameter indicates the maximum number of NO retransmissions over an IPv6 SCTP association. When the number of retransmissions on the association exceeds the value of this parameter, the eNodeB considers the IPv6 SCTP link as broken and reports a link failure alarm. Indicates the maximum number of retransmissions over a path. If the number of retransmissions over a path exceeds the value of this parameter but no response message NO is received, the eNodeB considers this path as unreachable. If the IPv6 SCTP link uses multihoming, that is, multiple paths, the eNodeB switches to another path.
NO
No
LOFD-002004 / TDLOFD-002004
NO
No
LOFD-002004 / TDLOFD-002004
Indicates whether to calculate the checksum of each message to be transmitted. If the calculated checksum of a message is different NO from the checksum contained in the message, the eNodeB considers this message to have bit errors and does not transmit the message. Indicates whether to check the NO checksum of each received message. Indicates the checksum calculation algorithm. NO
NO
No
LOFD-002004 / TDLOFD-002004
NO
No
LOFD-002004 / TDLOFD-002004
NO
No
LOFD-002004 / TDLOFD-002004
Indicates whether to switch back to the primary path when the primary path is restored. When the primary path is unreachable, the eNodeB switches to NO the secondary path. This parameter is used to set whether the eNodeB switches back to the primary path when the primary path is restored.
NO
No
LOFD-002004 / TDLOFD-002004
Indicates the number of consecutive heartbeat response messages that must be detected over the primary path of an IPv6 SCTP link before the eNodeB can switch back to this primary path. NO After the primary path is restored and the number of consecutive heartbeat response messages reaches the value of this parameter, the eNodeB switches back to the primary path.
NO
No
LOFD-002004 / TDLOFD-002004
Indicates the ID of the operator that owns the X2 signaling IPv6 address.
NO
NO
No
LOFD-002004 / TDLOFD-002004
Indicates the ID of the neighboring IPv6 eNodeB.
YES
YES
No
LOFD-002004 / TDLOFD-002004
Indicates the first signaling IPv6 address of the neighboring IPv6 eNodeB, which is to be used as the first NO peer IPv6 address for an automatically set up IPv6 SCTP link on the X2 interface.
YES
No
LOFD-002004 / TDLOFD-002004
Indicates whether to enable automatic setup of an IPv6 IPSec tunnel between the local eNodeB and the neighboring IPv6 eNodeB. The IPv6 IPSec tunnel is NO used to protect data transmission on the IPv6 SCTP link that is set up using the first signaling IPv6 address of the neighboring IPv6 eNodeB.
NO
No
Indicates whether to enable the neighboring IPv6 eNodeB to perform IPv6 IPSec negotiation with the local eNodeB through an SeGW when SIGIP1SECFLAG is set to ENABLE. If this parameter is set NO to DISABLE, the neighboring IPv6 eNodeB directly negotiates with the local eNodeB. If this parameter is set to ENABLE, the neighboring IPv6 eNodeB negotiates with the local eNodeB through an SeGW. Indicates the local IPv6 address used by the neighboring IPv6 eNodeB in IPv6 IKE negotiation with the local eNodeB. The value of this NO parameter is the same as the value of the SIGIKEIP1 parameter in the X2SigIP6 MO configured on the neighboring IPv6 eNodeB.
NO
No
NO
No
Indicates the second signaling IPv6 address of the neighboring IPv6 eNodeB, which is to be used as the NO second peer IPv6 address for an automatically set up IPv6 SCTP link on the X2 interface.
NO
No
Indicates whether to enable automatic setup of an IPv6 IPSec tunnel between the local eNodeB and the neighboring IPv6 eNodeB to protect NO data transmission on the SCTP link that is set up using the second signaling IPv6 address of the neighboring IPv6 eNodeB.
NO
No
Indicates whether to enable the neighboring IPv6 eNodeB to perform IPv6 IPSec negotiation with the local eNodeB through an SeGW when SIGIP2SECFLAG is set to ENABLE. If this parameter is set NO to DISABLE, the neighboring IPv6 eNodeB directly negotiates with the local eNodeB. If this parameter is set to ENABLE, the neighboring IPv6 eNodeB negotiates with the local eNodeB through an SeGW. Indicates the local IPv6 address used by the neighboring IPv6 eNodeB in IPv6 IKE negotiation with the local eNodeB. The value of this NO parameter is the same as the value of the SIGIKEIP2 parameter in the X2SigIP6 MO configured on the neighboring IPv6 eNodeB.
NO
No
NO
No
Indicates the SCTP port number of the neighboring IPv6 eNodeB, which is to be used as the peer SCTP port number for an automatically set up IPv6 SCTP link on the X2 NO interface. If the X2SonLinkSetupTy pe parameter in the GLOBALPROCSWI TCH MO is set to X2_OVER_S1, this parameter must be set to 36422.
NO
No
LOFD-002004 / TDLOFD-002004
Indicates the first service IPv6 address of the neighboring IPv6 eNodeB, which is to NO be used in automatic setup of an IPv6 path on the X2 interface.
NO
No
LOFD-002004 / TDLOFD-002004
Indicates whether to enable automatic setup of an IPv6 IPSec tunnel between the local eNodeB and the neighboring IPv6 eNodeB to protect NO data transmission on the IPv6 path that is set up using the first service IPv6 address of the neighboring IPv6 eNodeB. Indicates whether to enable the peer eNodeB to perform IP security (IPsec) negotiation with the local eNodeB through a security gateway (SeGW). This parameter is valid only when SERVIP1IPSECFL AG is set to NO ENABLE. If this parameter is set to DISABLE, the peer eNodeB directly negotiates with the local eNodeB. If this parameter is set to ENABLE, the peer eNodeB negotiates with the local eNodeB through the SeGW.
NO
No
NO
No
Indicates the local IPv6 address used by the neighboring IPv6 eNodeB in IPv6 IKE negotiation with the local eNodeB. The value of this NO parameter is the same as the value of the SERVIKEIP parameter in the X2ServIP6 MO configured on the neighboring IPv6 eNodeB.
NO
No
Indicates the second service IPv6 address of the neighboring IPv6 eNodeB, which is to NO be used in automatic setup of an IPv6 path on the X2 interface.
NO
No
LOFD-002004 / TDLOFD-002004
Indicates whether to enable automatic setup of an IPv6 IPSec tunnel between the local eNodeB and the neighboring IPv6 eNodeB to protect NO data transmission on the IPv6 path that is set up using the second service IPv6 address of the neighboring IPv6 eNodeB. Indicates whether to enable the peer eNodeB to perform IP security (IPsec) negotiation with the local eNodeB through a security gateway (SeGW). This parameter is valid only when SERVIP2IPSECFL AG is set to NO ENABLE. If this parameter is set to DISABLE, the peer eNodeB directly negotiates with the local eNodeB. If this parameter is set to ENABLE, the peer eNodeB negotiates with the local eNodeB through the SeGW.
NO
No
NO
No
NO
No
Indicates the third service IPv6 address of the neighboring IPv6 eNodeB, which is to NO be used in automatic setup of an IPv6 path on the X2 interface.
NO
No
LOFD-002004 / TDLOFD-002004
Indicates whether to enable automatic setup of an IPv6 IPSec tunnel between the local eNodeB and the neighboring IPv6 eNodeB to protect NO data transmission on the IPv6 path that is set up using the third service IPv6 address of the neighboring IPv6 eNodeB. Indicates whether to enable the peer eNodeB to perform IP security (IPsec) negotiation with the local eNodeB through a security gateway (SeGW). This parameter is valid only when SERVIP3IPSECFL AG is set to NO ENABLE. If this parameter is set to DISABLE, the peer eNodeB directly negotiates with the local eNodeB. If this parameter is set to ENABLE, the peer eNodeB negotiates with the local eNodeB through the SeGW.
NO
No
NO
No
NO
No
Indicates the fourth service IPv6 address of the neighboring IPv6 eNodeB, which is to NO be used in automatic setup of an IPv6 path on the X2 interface.
NO
No
LOFD-002004 / TDLOFD-002004
Indicates whether to enable automatic setup of an IPv6 IPSec tunnel between the local eNodeB and the neighboring IPv6 eNodeB to protect NO data transmission on the IPv6 path that is set up using the fourth service IPv6 address of the neighboring IPv6 eNodeB. Indicates whether to enable the peer eNodeB to perform IP security (IPsec) negotiation with the local eNodeB through a security gateway (SeGW). This parameter is valid only when SERVIP4IPSECFL AG is set to NO ENABLE. If this parameter is set to DISABLE, the peer eNodeB directly negotiates with the local eNodeB. If this parameter is set to ENABLE, the peer eNodeB negotiates with the local eNodeB through the SeGW.
NO
No
NO
No
Indicates the local IPv6 address used by the neighboring IPv6 eNodeB in IPv6 IKE negotiation with the local eNodeB. The value of this NO parameter is the same as the value of the SERVIKEIP parameter in the X2ServIP6 MO configured on the neighboring IPv6 eNodeB. Indicates the mobile country code (MCC) of the neighboring NO IPv6 eNodeB. An MCC consists of three digits. Indicates the mobile network code (MNC) of the neighboring IPv6 NO eNodeB. An MNC consists of two or three digits. Indicates the ID of the peer eNodeB. Indicates the description of X2eNodeB6. Indicates the ID of the operator that owns the neighboring IPv6 eNodeB, by which the local eNodeB identifies the neighboring IPv6 eNodeB.
NO
No
NO
No
LOFD-002004 / TDLOFD-002004
NO
No
LOFD-002004 / TDLOFD-002004
NO
NO
No
LBFD-003006 / TDLBFD-003006 LOFD-002004 / TDLOFD-002004 LOFD-002004
NO
NO
No
NO
NO
No
LOFD-002004 / TDLOFD-002004
Indicates the compliance protocol release of the NO neighboring eNodeB.
NO
No
Indicates the name YES of the CA.
YES
No
LOFD-003010 / TDLOFD-003010
Indicates the URL of the CA. The URL can be either an HTTP or HTTPS URL. The IP address in the URL NO must be a valid IP address. The default port number is 80 for HTTP or 443 for HTTPS. Indicates the signature algorithm for message of CMP. The signature algorithm can be NO Secure Hash Algorithm 1 (SHA1) or Hash Algorithm 256 (SHA256). Indicates the common name of the certificate request file, which can be the electronic serial NO number (ESN), media access control (MAC) address, or IP address of a board. Indicates the additional information about a certificate common name. The information will be added behind the value of the COMMNAME NO parameter to compose a complete common name for a certificate request file. The default value is .huawei.com.
YES
No
LOFD-003010 / TDLOFD-003010
NO
No
None
NO
No
LOFD-003010 / TDLOFD-003010
NO
No
LOFD-003010 / TDLOFD-003010
Indicates the country where a BS NO is located.
NO
No
LOFD-003010 / TDLOFD-003010
Indicates the organization that owns a BS.
NO
NO
No
LOFD-003010 / TDLOFD-003010
Indicates the organization unit that owns a BS.
NO
NO
No
LOFD-003010 / TDLOFD-003010
Indicates the state or province where a NO BS is located.
NO
No
LOFD-003010 / TDLOFD-003010
Indicates the location of a BS.
NO
NO
No
LOFD-003010 / TDLOFD-003010
Indicates the usage for a key, including KEY_AGREEMENT (key negotiation), DATA_ENCIPHER MENT (data encryption), KEY_ENCIPHERM NO ENT (key encryption), and DIGITAL_SIGNATU RE (digital signature). This parameter can be set to one or multiple values. Indicates the signature algorithm for a certificate request file. The signature algorithm can be Secure NO Hash Algorithm 1 (SHA1), MessageDigest Algorithm 5 (MD5) or Hash Algorithm 256 (SHA256). Indicates the length of a key, which can NO be 1024 bits or 2048 bits.
NO
No
LOFD-003010 / TDLOFD-003010
NO
No
LOFD-003010 / TDLOFD-003010
NO
No
LOFD-003010 / TDLOFD-003010
Indicates the local name of a BS.
NO
NO
No
LOFD-003010 / TDLOFD-003010
Indicates the local NO IP address of a BS.
NO
No
LOFD-003010 / TDLOFD-003010
Indicates the file name of a device certificate. The file name cannot include any of the following characters: backslashes (\), YES slashes (/), colons (:), asterisks (*), question marks (?), double quotation marks ("), left angle brackets (<), right angle brackets (>), and bars (|).
YES
No
LOFD-003010 / TDLOFD-003010
Indicates the serial number of a device certificate. Indicates the common name of a device certificate. Indicates the issuer of a device certificate. Indicates the expiration date of a device certificate. Indicates the date when a device certificate begins to take effect. Indicates the application type of activated device certificate. There are two types: IKE and SSL.
NO
NO
Yes
NO
NO
Yes
NO
NO
Yes
NO
NO
Yes
NO
NO
Yes
YES
YES
No
LOFD-003010 / TDLOFD-003010
Indicates the file name of an activated device certificate. The file name cannot include any of the following characters: backslashes (\), NO slashes (/), colons (:), asterisks (*), question marks (?), double quotation marks ("), left angle brackets (<), right angle brackets (>), and bars (|). Indicates the issuer of an activated NO device certificate. Indicates the common name of NO an activated device certificate. Indicates the serial number of an activated device certificate. NO
YES
No
LOFD-003010 / TDLOFD-003010
NO
Yes
NO
Yes
NO
Yes
LOFD-003010 / TDLOFD-003010
Indicates the expiration date of NO an activated device certificate. Indicates the IKE name of the peer device, which is used in IKE negotiation with the local end to test an activated device certificate. This NO parameter is used only in the TST APPCERT command in the current version and will be removed in later versions. Indicates the date when an activated device certificate begins to take effect.
NO
Yes
LOFD-003010 / TDLOFD-003010
NO
No
LOFD-003010 / TDLOFD-003010
NO
NO
Yes
LOFD-003010 / TDLOFD-003010
Indicates the loading status of an NO activated device certificate. Indicates the certificate NO application type supported by a BS. Indicates the name of the crosscertificate. The file name cannot include any of the following characters: backslashes (\), YES slashes (/), colons (:), asterisks (*), question marks (?), double quotation marks ("), left angle brackets (<), right angle brackets (>), and bars (|). Indicates the serial number of the cross- NO certificate. Indicates the common name of NO the cross-certificate. Indicates the issuer of the crossNO certificate. Indicates the expiration date of NO the cross-certificate.
NO
Yes
LOFD-003010 / TDLOFD-003010
NO
Yes
LOFD-003010 / TDLOFD-003010
YES
No
LOFD-003010 / TDLOFD-003010
NO
Yes
LOFD-003010 / TDLOFD-003010 LOFD-003010 / TDLOFD-003010 LOFD-003010 / TDLOFD-003010 LOFD-003010 / TDLOFD-003010
NO
Yes
NO
Yes
NO
Yes
Indicates the loading status of the NO cross-certificate.
NO
Yes
LOFD-003010 / TDLOFD-003010
Indicates the date when the crossNO certificate begins to take effect.
NO
Yes
LOFD-003010 / TDLOFD-003010
Indicates the file name of the trusted certificate. The file name cannot include any of the following characters: backslashes (\), YES slashes (/), colons (:), asterisks (*), question marks (?), double quotation marks ("), left angle brackets (<), right angle brackets (>), and bars (|). Indicates the serial number of the trusted certificate. Indicates the common name of the trusted certificate. Indicates the issuer of the trusted certificate. Indicates the expiration date of the trusted certificate.
YES
No
LOFD-003010 / TDLOFD-003010
NO
NO
Yes
NO
NO
Yes
NO
NO
Yes
NO
NO
Yes
Indicates the loading status of the NO trusted certificate.
NO
Yes
LOFD-003010 / TDLOFD-003010
Indicates the date when the trusted NO certificate begins to take effect.
NO
Yes
LOFD-003010 / TDLOFD-003010
Indicates the file name of a CRL. The file name cannot include any of the following characters: backslashes (\), slashes (/), colons YES (:), asterisks (*), question marks (?), double quotation marks ("), left angle brackets (<), right angle brackets (>), and bars (|).
YES
No
LOFD-003010 / TDLOFD-003010
Indicates the loading status of a CRL.
NO
NO
Yes
LOFD-003010 / TDLOFD-003010
Indicates the issuer NO of a CRL. Indicates the next update time of the NO CRL. Indicates the current update time NO of the CRL.
NO NO
Yes Yes
NO
Yes
Indicates the IP address of an FTP server or LDAP server.
NO
YES
No
LOFD-003010 / TDLOFD-003010
Indicates the user name used to log in NO to an FTP server or LDAP server. Indicates the password used to log in to an FTP server or LDAP server.
NO
No
LOFD-003010 / TDLOFD-003010
NO
NO
No
LOFD-003010 / TDLOFD-003010
Indicates the port number of an LDAP NO server.
NO
No
LOFD-003010 / TDLOFD-003010
Indicates the file name of a CRL. The file name cannot include any of the following characters: backslashes (\), slashes (/), colons NO (:), asterisks (*), question marks (?), double quotation marks ("), left angle brackets (<), right angle brackets (>), and bars (|). Indicates whether to update the CRL at the next update time specified in the CRL that is obtained during the latest update. If this parameter is set to ENABLE, the BS automatically updates the CRL NO when the next update time specified in the CRL arrives. If this parameter is set to DISABLE, the BS automatically updates the CRL based on the configured updating period. Indicates the interval at which the BS automatically NO obtains the CRL from the FTP server or LDAP server. Indicates the ID of the task for periodically obtaining the CRL.
YES
No
LOFD-003010 / TDLOFD-003010
NO
No
LOFD-003010 / TDLOFD-003010
NO
No
LOFD-003010 / TDLOFD-003010
YES
YES
No
LOFD-003010 / TDLOFD-003010
Indicates the method using which NO the BS periodically obtains a CRL.
NO
No
LOFD-003010 / TDLOFD-003010
Indicates the name of a node found in NO an LDAP server.
NO
No
LOFD-003010 / TDLOFD-003010
Indicates whether a task of certificate NO validity checking is started. Indicates the interval between certificate validity checking tasks. NO
NO
No
LOFD-003010 / TDLOFD-003010
NO
No
LOFD-003010 / TDLOFD-003010
Indicates the threshold for reporting a certificate expiration alarm. If a BS detects that the interval between its current time and the NO expiration date of an activated device certificate is shorter than the threshold, a certificate expiration alarm is reported. Indicates the method for updating a certificate that has expired or is about to expire. There are two methods: proxy and CMP. If the proxy method is used, the BS uses NO the M2000 as the proxy to update the certificate from the Certificate Authority (CA). If the CMP method is used, the BS directly updates the certificate from the CA.
NO
No
LOFD-003010 / TDLOFD-003010
NO
No
LOFD-003010 / TDLOFD-003010
Indicates the policy type. There are three policies to use CRLs. The value NOVERIFY indicates that the BS does not perform CRL-based certificate checks. The value ALARM indicates that the BS performs CRLbased certificate checks on the peer device and reports an alarm if the NO certificate is found in the CRL. The value DISCONNECT indicates that the BS performs CRLbased certificate checks on the peer device and cuts off the communication with the peer device and reports an alarm if the certificate is found in the CRL. Indicates the ID of the Access Control List (ACL) to which the access control rule belongs. ACL ID in the range from 3000 to 3999 identifies high-level rules based on the YES layer 3 and layer 4 information. ACL ID in the range from 4000 to 4999 identifies access control rules based on the MAC layer information. Indicates the brief description of the ACL.
NO
No
LOFD-003010 / TDLOFD-003010
YES
No
NO
YES
No
Indicates the ID of the IPv6 Access Control List (ACL) to which the IPv6 access control rule belongs. Indicates the brief description of an IPv6 ACL.
YES
YES
No
LBFD-003006 / TDLBFD-003006 LOFD-00301401 / TDLOFD-00301401 LBFD-003006 / TDLBFD-003006 LOFD-00301401 / TDLOFD-00301401 LOFD-003009 / TDLOFD-003009 LOFD-00301401 / TDLOFD-00301401 LOFD-003009 / TDLOFD-003009 LOFD-00301401 / TDLOFD-00301401
NO
YES
No
Indicates the ID of the Access Control List (ACL) to which YES the ACL rule belongs. Indicates the ID of the ACL rule. YES
YES
No
YES
No
Indicates the action taken on the data that matches the ACL rule. When the ACL to which the ACL rule belongs is referenced by a packet filter, the BS accepts or transmits the data that matches the rule if this parameter is set to PERMIT, and rejects the data if this parameter is set NO to DENY. When the ACL is referenced by an IPSec policy, the BS encrypts or decrypts the data that matches the rule if this parameter is set to PERMIT, and does not perform any encryption or decryption on the data if this parameter is set to DENY.
NO
No
Indicates the protocol type of the NO data to which the ACL rule is applied. Indicates the source IP address of data to which the ACL rule is applied. To add an ACL rule NO that is applicable to data of all source IP addresses, set this parameter to 0.0.0.0. Indicates the wildcard of the source IP address. The wildcard is used to determine which bits can be neglected when IP NO address matching is being performed. Generally, it can be considered as the inverse of the corresponding subnet mask.
YES
No
YES
No
YES
No
Indicates whether to check the source port number of each NO data stream before applying the ACL rule.
YES
No
Indicates the filtering condition for the source port. If this parameter is set to OP_LT, the ACL rule is applied to the data stream whose source port number is smaller than or equal to the configured port number. If this parameter is set to OP_GT, the ACL rule is applied to the data stream whose source port number NO is larger than or equal to the configured port number. If this parameter is set to OP_EQ, the ACL rule is applied to the data stream whose source port number is equal to the configured port number. If this parameter is set to OP_NEQ, the ACL rule is applied to the data stream whose source port number Indicates the source port number used when SMPT is set to YES. If SOP is set to OP_RANGE, this parameter indicates the NO smallest source port number. If SOP is not set to OP_RANGE, this parameter indicates a specific source port number.
YES
No
YES
No
Indicates the source port number used when SMPT is set to YES. If SOP is set to OP_RANGE, this parameter NO indicates the largest source port number. This parameter is valid only when SOP is set to OP_RANGE. Indicates the destination IP address of data to which the ACL rule is applied. To add an ACL rule that is NO applicable to data of all destination IP addresses, set this parameter to 0.0.0.0. Indicates the wildcard of the destination IP address. The wildcard is used to determine which bits can be neglected when IP NO address matching is being performed. Generally, it can be considered as the inverse of the corresponding subnet mask. Indicates whether to check the destination port number of each NO data stream before applying the ACL rule.
YES
No
YES
No
YES
No
YES
No
Indicates the filtering condition for the destination port. This parameter is valid only when DMPT is set to YES. If this parameter is set to OP_LT, the ACL rule is applied to the data stream whose destination port number is smaller than or equal to the configured port number. If this parameter is set to NO OP_GT, the ACL rule is applied to the data stream whose destination port number is larger than or equal to the configured port number. If this parameter is set to OP_EQ, the ACL rule is applied to the data stream whose destination port number is equal to the configured port number. If this parameter is set to Indicates the destination port number used when DMPT is set to YES. If DOP is set to OP_RANGE, this parameter indicates the smallest NO destination port number. If DOP is not set to OP_RANGE, this parameter indicates a specific destination port number.
YES
No
YES
No
Indicates the destination port number used when DMPT is set to YES. If DOP is set to OP_RANGE, this parameter indicates NO the largest destination port number. This parameter is valid only when DOP is set to OP_RANGE. Indicates whether to check the DSCP of each data stream NO before applying the ACL rule. Indicates the Differentiated Services Code Point (DSCP).
YES
No
NO
No
NO
YES
No
Indicates whether to match the fragment message. The ACL rules for matching fragment messages NO apply to only packet filtering and does not apply to the IPSec function.
NO
No
Indicates the filter criteria for VLAN IDs. This parameter is valid only when ACLID ranges from 4000 to 4999. When this parameter is set to OP_EQ, only the VLAN ID specified NO by VLANID1 is a valid one. When this parameter is set to OP_RANGE, all the VLAN IDs within the range of VLANID1 to VLANID2 are valid ones. Indicates the ID of a VLAN to which service data belongs. When Source Port Operate is set to OP_EQ, this parameter specifies the ID of the NO matching VLAN. When Source Port Operate is set to OP_RANGE, this parameter specifies the minimum ID of the matching VLANs. Indicates the ID of a VLAN to which service data belongs. When Source Port Operate is set to OP_RANGE, this parameter specifies NO the maximum ID of the matching VLANs. This parameter is valid only when Source Port Operate is set to OP_RANGE.
YES
No
YES
No
YES
No
Indicates the ID of the IPv6 Access Control List (ACL) to which the IPv6 access control rule belongs. Indicates the ID of the IPv6 ACL rule.
YES
YES
No
LBFD-003006 / TDLBFD-003006 LOFD-00301401 / TDLOFD-00301401 LBFD-003006 / TDLBFD-003006 LOFD-00301401 / TDLOFD-00301401
YES
YES
No
Indicates the action taken on the data that matches the IPv6 ACL rule. When the IPv6 ACL is referenced by an IPv6 IPSec policy, the BS encrypts or decrypts the data that matches the NO rule if this parameter is set to PERMIT, and does not perform any encryption or decryption on the data if this parameter is set to DENY. Indicates the protocol type of the data to which the NO IPv6 ACL rule is applied. Indicates the source IPv6 address of NO data to which the IPv6 ACL rule is applied. Indicates the prefix length of the source IPv6 address. The prefix length is used to determine which NO bits must be compared for matching when IPv6 address matching is being performed.
NO
No
YES
No
YES
No
YES
No
Indicates whether to check the source port number of each NO data stream before applying the ACL rule. Indicates the filter criteria for the source port. If this parameter is set to OP_LT, the ACL rule is applied to the data stream whose source port number is smaller than or equal to the configured port number. If this parameter is set to OP_GT, the ACL rule is applied to the data stream whose source port number NO is larger than or equal to the configured port number. If this parameter is set to OP_EQ, the ACL rule is applied to the data stream whose source port number is equal to the configured port number. If this parameter is set to OP_NEQ, the ACL rule is applied to the data stream whose source port number Indicates the source port number used when SMPT is set to YES. If SOP is set to OP_RANGE, this parameter indicates the NO smallest source port number. If SOP is not set to OP_RANGE, this parameter indicates a specific source port number.
YES
No
YES
No
YES
No
Indicates the source port number used when SMPT is set to YES. If SOP is set to OP_RANGE, this parameter NO indicates the largest source port number. This parameter is valid only when SOP is set to OP_RANGE. Indicates the destination IPv6 address of data to NO which the IPv6 ACL rule is applied. Indicates the prefix length of the destination IPv6 address. The prefix length is used to determine which NO bits must be compared for matching when IPv6 address matching is being performed. Indicates whether to check the destination port number of each NO data stream before applying the ACL rule.
YES
No
YES
No
YES
No
YES
No
Indicates the filter criteria for the destination port. This parameter is valid only when DMPT is set to YES. If this parameter is set to OP_LT, the ACL rule is applied to the data stream whose destination port number is smaller than or equal to the configured port number. If this parameter is set to NO OP_GT, the ACL rule is applied to the data stream whose destination port number is larger than or equal to the configured port number. If this parameter is set to OP_EQ, the ACL rule is applied to the data stream whose destination port number is equal to the configured port number. If this parameter is set to Indicates the destination port number used when DMPT is set to YES. If DOP is set to OP_RANGE, this parameter indicates the smallest NO destination port number. If DOP is not set to OP_RANGE, this parameter indicates a specific destination port number.
YES
No
YES
No
Indicates the destination port number used when DMPT is set to YES. If DOP is set to OP_RANGE, this parameter indicates NO the largest destination port number. This parameter is valid only when DOP is set to OP_RANGE. Indicates whether to check the DSCP of each data stream NO before applying the IPv6 ACL rule. Indicates the DSCP that complies with NO an IPv6 ACL rule.
YES
No
NO
No
YES
No
Indicates the cabinet No. to which YES a BFD session belongs.
NO
No
LOFD-003007 / TDLOFD-003007
Indicates the subrack No. to which a BFD session belongs.
YES
NO
No
LOFD-003007 / TDLOFD-003007
Indicates the slot No. to which a BFD YES session belongs.
YES
No
LOFD-003007 / TDLOFD-003007
Indicates the ID of a BFD session. The session ID plus 1 is the local discriminator of the BFD session. The YES local discriminator must be consistent with the configuration at the peer side.
YES
No
LOFD-003007 / TDLOFD-003007
Indicates the source IP address of the BFD session. The source IP address of a BFD session must be a device IP address (for example, the IP address of an Ethernet port) of a specified board or a logical IP address (for example, the IP address of the NO loopback port), but cannot be set to the IP address of a remote maintenance channel or a negotiated IP address. Note that a BFD session cannot be configured as a single-hope session if its source IP address is a logical IP address.
YES
No
LOFD-003007 / TDLOFD-003007
Indicates the destination IP address of a BFD session. The destination IP address must be a valid IP address, and cannot be set to 0.0.0.0 or any existing IP addresses in the system. If Virtual NO Router Redundancy Protocol (VRRP) is used in the network, two BFD sessions must be configured with the destination IP addresses set to the active and standby physical IP addresses of the virtual router, respectively.
YES
No
LOFD-003007 / TDLOFD-003007
Indicates the hop type of the BFD session. The singlehop BFD session is used to perform point-to-point detection at the data link layer, and often used in layer 2 networking NO scenarios. The multihop BFD session is used to perform endto-end connectivity checks at the transport layer, and often used in layer 3 networking scenarios. Indicates the minimum interval at which the BFD NO session transmits control packets. Indicates the minimum interval at which the BFD NO session receives control packets. Indicates the detection multiplier of a BFD session.
YES
No
LOFD-003007 / TDLOFD-003007
NO
No
LOFD-003007 / TDLOFD-003007
NO
No
LOFD-003007 / TDLOFD-003007
NO
NO
No
LOFD-003007 / TDLOFD-003007
Indicates the type of the BFD session. If this parameter is set to MAINTENANCE, this BFD session is used only for continuity check (CC). If this parameter is set to RELIABILITY, the BFD session is NO used to trigger route interlock. Route interlock enables the standby route to take over once the active route becomes faulty, and therefore prevents service interruption caused by route failures. Indicates the Differentiated Services Code Point (DSCP). The priority has a positive correlation with the value of this parameter.
NO
No
LOFD-003007 / TDLOFD-003007
NO
NO
No
LOFD-003007 / TDLOFD-003007
Indicates whether to delete the historical statistics. If this parameter is set to YES, the historical statistics are NO deleted and a new round of statistics collecting starts upon completion of the query. Indicates the state of a BFD session. Indicates the effective detection mode through negotiation.
NO
Yes
LOFD-003007 / TDLOFD-003007
NO
NO
Yes
LOFD-003007 / TDLOFD-003007
NO
NO
Yes
LOFD-003007 / TDLOFD-003007
Indicates the effective minimum NO TX interval through negotiation. Indicates the effective minimum NO RX interval through negotiation. Indicates the detection time when NO the negotiation takes effect. Indicates the local discriminator of the BFD session. The value of this NO parameter is equal to the session number plus 1. Indicates the peer descriminator of a NO BFD session. Indicates the number of NO transmitted packets of a BFD session. Indicates the number of NO messages received by the BFD session. Indicates the up-todown number of a NO BFD session.
NO
Yes
LOFD-003007 / TDLOFD-003007
NO
Yes
LOFD-003007 / TDLOFD-003007
NO
Yes
LOFD-003007 / TDLOFD-003007
NO
Yes
LOFD-003007 / TDLOFD-003007
NO
Yes
NO
Yes
NO
Yes
LOFD-003007 / TDLOFD-003007
NO
Yes
LOFD-003007 / TDLOFD-003007
Indicates the diagnostic field of the BFD session, NO that is, the cause of the latest failure.
NO
Yes
LOFD-003007 / TDLOFD-003007
Indicates the interface index of a BFD session. For NO the BFD session in multi-hop mode, the interface index is 0. Indicates the protocol version of a NO BFD session.
NO
Yes
LOFD-003007 / TDLOFD-003007
NO
No
LOFD-003007 / TDLOFD-003007
Indicates the deployment position of a digital certificate. If this parameter is set to DEFAULT, the certificate is configured on the main control board. If this parameter is NO set to SPECIFIC, the certificate is configured on the board in the specified slot. If this parameter is set to NULL, no certificate is configured on the BS. Indicates the number of the cabinet where a board is located. Indicates the number of the subrack where a board is located. Indicates the number of the slot where a board is located.
NO
No
LOFD-003010 / TDLOFD-003010
NO
NO
No
LOFD-003010 / TDLOFD-003010
NO
NO
No
LOFD-003010 / TDLOFD-003010
NO
NO
No
LOFD-003010 / TDLOFD-003010
Indicates the name of the MD to which YES the RMEP belongs.
YES
No
LOFD-00300402 / TDLOFD-00300402
Indicates the name of the MA to which YES the RMEP belongs.
YES
No
LOFD-00300402 / TDLOFD-00300402
Indicates the RMEP YES ID. Indicates the IP address at the Ethernet port or Ethernet trunk corresponding to the RMEP. The IP address bound to the remote MEP cannot be the same as the existing local IP address or any IP address of an effective physical or loopback port. The bound IP address cannot be the same as the local IP YES address dynamically negotiated on the PPP/MLPPP link. When the IP address is bound, the existing IP address of the system may conflict with the IP address to be configured, run the LST/DSP (DEVIP, OMCH, PPPLNK, LOCALIP, MPGRP, or IPRT) command to query the IP Indicates the name of the MD to which YES the MA belongs.
YES
No
LOFD-00300402 / TDLOFD-00300402
YES
No
LOFD-00300402 / TDLOFD-00300402
YES
No
LOFD-00300402 / TDLOFD-00300402
Indicates the name YES of the MA.
YES
No
LOFD-00300402 / TDLOFD-00300402
Indicates cabinet number of the board NO to which the MA belongs. Indicates subrack number of the board NO to which the MA belongs. Indicates slot number of the board NO to which the MA belongs. Indicates whether the MA is NO associated with the VLAN. Indicates the ID of the VLAN with which the MA is associated.
NO
No
LOFD-00300402 / TDLOFD-00300402
NO
No
LOFD-00300402 / TDLOFD-00300402
YES
No
LOFD-00300402 / TDLOFD-00300402
NO
No
LOFD-00300402 / TDLOFD-00300402
NO
NO
No
LOFD-00300402 / TDLOFD-00300402
Indicates the priority of the VLAN with NO which the MA is associated. Indicates the interval at which the CFM MA transmits NO continuity check messages (CCMs). Indicates the number of local MEPs in an MA. Indicates the number of RMEPs in an MA. NO
NO
No
LOFD-00300402 / TDLOFD-00300402
NO
No
LOFD-00300402 / TDLOFD-00300402
NO
Yes
NO
NO
Yes
Indicates the list of local MEPs in an MA. Indicates the list of RMEPs in an MA.
NO NO
NO NO
Yes Yes
Indicates the name YES of the CFM MD.
YES
No
LOFD-00300402 / TDLOFD-00300402
Indicates the level of the CFM MD.
NO
NO
No
LOFD-00300402 / TDLOFD-00300402
Indicates the number of MAs in a NO CFMMD. Indicates the list of all MAs in a NO CFMMD. Indicates the name of the MD to which YES the MEP belongs.
NO
Yes
NO
Yes
YES
No
LOFD-00300402 / TDLOFD-00300402
Indicates the name of the MA to which YES the MEP belongs.
YES
No
LOFD-00300402 / TDLOFD-00300402
Indicates the MEP ID.
YES
YES
No
LOFD-00300402 / TDLOFD-00300402
Indicates cabinet number of the board NO to which the MEP belongs. Indicates subrack number of the board NO to which the MEP belongs. Indicates slot number of the board NO to which the MEP belongs.
NO
No
LOFD-00300402 / TDLOFD-00300402
NO
No
LOFD-00300402 / TDLOFD-00300402
YES
No
LOFD-00300402 / TDLOFD-00300402
Indicates the type of subboard on the NO board where the MEP is located.
YES
No
LOFD-00300402 / TDLOFD-00300402
Indicates the port type of MEP.
NO
YES
No
LOFD-00300402 / TDLOFD-00300402
Indicates the port NO number of the MEP.
YES
No
LOFD-00300402 / TDLOFD-00300402
Indicates whether to enable the NO continuity check (CC) of the CFM. Indicates the ID of a VLAN of the MA to NO which the MEP belongs. Indicates the ID of a VLAN of the MA to NO which the MEP belongs. Indicates the priority of a VLAN of the NO MA to which the MEP belongs. Indicates the number of transmitted NO Connectivity Check (CC) packets.
NO
No
LOFD-00300402 / TDLOFD-00300402
NO
Yes
LOFD-00300402 / TDLOFD-00300402
NO
Yes
LOFD-00300402 / TDLOFD-00300402
NO
Yes
LOFD-00300402 / TDLOFD-00300402
NO
Yes
LOFD-00300402 / TDLOFD-00300402
Indicates the number of received NO Connectivity Check (CC) packets. Indicates the number of transmitted loopback packets. Indicates the number of received loopback packets. Indicates the number of transmitted traced over packets. Indicates the number of received traced over packets. Indicates the number of transmitted packets CFM packets. NO
NO
Yes
LOFD-00300402 / TDLOFD-00300402
NO
Yes
NO
NO
Yes
NO
NO
Yes
NO
NO
Yes
NO
NO
Yes
Indicates the number of NO transmitted packets CFM packets. Indicates the number of transmitted packets NO CFM packets discarded. Indicates the number of received NO packets CFM packets discarded.
NO
Yes
LOFD-00300402 / TDLOFD-00300402
NO
Yes
LOFD-00300402 / TDLOFD-00300402
NO
Yes
LOFD-00300402 / TDLOFD-00300402
Indicates the name of the MD to which YES the RMEP belongs.
YES
No
LOFD-00300402 / TDLOFD-00300402
Indicates the name of the MA to which YES the RMEP belongs.
YES
No
LOFD-00300402 / TDLOFD-00300402
Indicates the RMEP YES ID. Indicates the MAC address of the RMEP. It must be a valid unicast address in the format of XXXXXXXX-XXXX. The MAC address of the RMEP can be obtained from the MAC address field NO carried in the CCM message. If the MAC address configured by the user is different from that carried in the CCM message, the MAC address carried in the MAC message prevails. Indicates the status NO of the RMEP. Indicates the actual MAC address of the RMEP. The format NO is XXXX-XXXXXXXX. Indicates the priority of a VLAN of the NO MA to which the RMEP belongs. Indicates the ID of a VLAN of the MA to NO which the RMEP belongs.
YES
No
LOFD-00300402 / TDLOFD-00300402
NO
No
LOFD-00300402 / TDLOFD-00300402
NO
Yes
NO
Yes
NO
Yes
LOFD-00300402 / TDLOFD-00300402
NO
Yes
LOFD-00300402 / TDLOFD-00300402
Indicates the number of received NO CCM packets from the RMEP. Indicates the number of the IP NO addresses bound to the RMEP. Indicates the list of the IP addresses NO bound to the RMEP. Indicates the type of the commissioning YES service.
NO
Yes
LOFD-00300402 / TDLOFD-00300402
NO
Yes
LOFD-00300402 / TDLOFD-00300402
NO
Yes
LOFD-00300402 / TDLOFD-00300402
YES
No
LOFD-003014 / TDLOFD-003014
Indicates the number of the YES commissioning port.
YES
No
LOFD-003014 / TDLOFD-003014
Indicates the switch used to enable or disable the commissioning port to run commissioning services. This port is physically located at the local maintenance Ethernet port. If this parameter is set to DISABLE, the commissioning port cannot run commissioning NO services. If this parameter is set to ENABLE, the commissioning port can run commissioning services. In this situation, this commissioning port receives cyber attacks, therefore special caution must be exercised during the setting of this parameter. Indicates the cabinet number of YES the board where the port is located. Indicates the subrack number of YES the board where the port is located. Indicates the slot number of the board YES where the port is located.
YES
No
LOFD-003014 / TDLOFD-003014
NO
No
None
NO
No
None
YES
No
None
Indicates the type of sub-board on the YES board where a port is located.
YES
No
None
Indicates the port type.
YES
YES
No
None
Indicates the number of a port.
YES
YES
No
None
Indicates the IP address configured YES for the port.
YES
No
None
Indicates the subnet mask of the device IP address NO configured on the port.
YES
No
None
Indicates the interface index of the device IPv6 address.
YES
YES
No
LBFD-003006 / TDLBFD-003006
Indicates the device YES IPv6 address.
YES
No
LBFD-003006 / TDLBFD-003006
Indicates the length of the prefix of the NO device IPv6 address.
YES
No
LBFD-003006 / TDLBFD-003006
Indicates the status of the device IPv6 NO address.
NO
Yes
LBFD-003006 / TDLBFD-003006
Indicates the time interval during which the device IPv6 address is in the valid state.
NO
NO
Yes
LBFD-003006 / TDLBFD-003006
Indicates the time interval during which the device IPv6 address is in the preferred state. Valid states are categorized into the preferred state and the deprecated state. In the preferred state, an address can be NO freely used; in the deprecated state, the connections previously established on this address are still usable, whereas any connection newly established on this address is not usable.
NO
Yes
LBFD-003006 / TDLBFD-003006
Indicates whether to enable the DHCP NO relay switch.
NO
No
None
Indicates the IP address of the DHCP server.
YES
YES
No
LBFD-00300102 / TDLBFD-00300102 LBFD-00300103 / TDLBFD-00300103 LOFD-002004 / TDLOFD-002004
Indicates whether to enable detection of automatic establishment of the NO remote maintenance channel.
NO
No
LOFD-002004 / TDLOFD-002004
Indicates the rule for prioritizing traffic to meet service requirements. If this parameter is set to IPPRECEDENCE, the protocol stack of NO the earlier version is adopted, which firstly converts types of service (TOSs) to DSCPs and then prioritizes traffic.
NO
No
LBFD-00300201 / TDLBFD-00300201
Indicates the priority of signaling. The priority has a NO positive correlation with the value of this parameter.
NO
No
LBFD-00300201 / TDLBFD-00300201
Indicates the priority of the high-level OM data. The priority has a positive correlation with the value of this parameter. The highNO level OM data includes the packets related to remote maintenance channel switchover and DHCP relay.
NO
No
LBFD-00300201 / TDLBFD-00300201
Indicates the priority of the low-level OM data, such as the data to be uploaded or downloaded. The priority has a positive correlation NO with the value of this parameter. The low-level OM data includes the packets related to File Transfer Protocol (FTP).
NO
No
LBFD-00300201 / TDLBFD-00300201
Indicates the DSCP of the IP clock packet. If the clock that follows the Precision Time Protocol (PTP) is used, the DSCP of the PTP packets NO takes effect. If the clock that follows the Huawei proprietary protocol is used, the DSCP of the protocol packet takes effect.
NO
No
LBFD-00300201 / TDLBFD-00300201
Indicates the priority of user data type 1. The priority has a NO positive correlation with the value of this parameter.
NO
No
LBFD-00300201 / TDLBFD-00300201
Indicates the type of primary transport NO resource for user data type 1.
NO
No
LBFD-00300201 / TDLBFD-00300201
Indicates the primary port load threshold of user data type 1. This threshold equals the NO ratio of the bandwidth occupied by the type-1 data to the total port bandwidth. Indicates the threshold of the primary-tosecondary port load ratio of user data type 1. This threshold equals the ratio of the primaryport bandwidth occupied by the type-1 data to the NO secondary-port bandwidth occupied by the type-1 data. When this threshold is exceeded, the type-1 data is preferentially admitted through the port with a light load.
NO
No
LBFD-00300201 / TDLBFD-00300201
NO
No
LBFD-00300201 / TDLBFD-00300201
NO
No
LBFD-00300201 / TDLBFD-00300201
NO
No
LBFD-00300201 / TDLBFD-00300201
NO
No
LBFD-00300201 / TDLBFD-00300201
NO
No
LBFD-00300201 / TDLBFD-00300201
NO
No
LBFD-00300201 / TDLBFD-00300201
NO
No
LBFD-00300201 / TDLBFD-00300201
NO
No
LBFD-00300201 / TDLBFD-00300201
NO
No
LBFD-00300201 / TDLBFD-00300201
NO
No
LBFD-00300201 / TDLBFD-00300201
NO
No
LBFD-00300201 / TDLBFD-00300201
NO
No
LBFD-00300201 / TDLBFD-00300201
NO
No
LBFD-00300201 / TDLBFD-00300201
NO
No
LBFD-00300201 / TDLBFD-00300201
NO
No
LBFD-00300201 / TDLBFD-00300201
NO
No
LBFD-00300201 / TDLBFD-00300201
NO
No
LBFD-00300201 / TDLBFD-00300201
NO
No
LBFD-00300201 / TDLBFD-00300201
NO
No
LBFD-00300201 / TDLBFD-00300201
NO
No
LBFD-00300201 / TDLBFD-00300201
NO
No
LBFD-00300201 / TDLBFD-00300201
NO
No
LBFD-00300201 / TDLBFD-00300201
NO
No
LBFD-00300201 / TDLBFD-00300201
NO
No
LBFD-00300201 / TDLBFD-00300201
NO
No
LBFD-00300201 / TDLBFD-00300201
NO
No
LBFD-00300201 / TDLBFD-00300201
NO
No
LBFD-00300201 / TDLBFD-00300201
NO
No
LBFD-00300201 / TDLBFD-00300201
NO
No
LBFD-00300201 / TDLBFD-00300201
NO
No
LBFD-00300201 / TDLBFD-00300201
NO
No
LBFD-00300201 / TDLBFD-00300201
Indicates the primary port load threshold of user data type 9. This threshold equals the NO ratio of the bandwidth occupied by the type-9 data to the total port bandwidth. Indicates the threshold of the primary-tosecondary port load ratio of user data type 9. This threshold equals the ratio of the primaryport bandwidth occupied by the type-9 data to the NO secondary-port bandwidth occupied by the type-9 data. When this threshold is exceeded, the type-9 data is preferentially admitted through the port with a light load. This parameter indicates whether to limit S1 interface downlink rate measured in bit per second (bps) in case of LBBP CPU overload. When S1 interface downlink traffic volume NO exceeds LBBP process ability, CPU in LBBP will overload and it will lead to degradation of air interface. This switch can be turned on to limit S1 interface downlink rate.
NO
No
LBFD-00300201 / TDLBFD-00300201
NO
No
LBFD-00300201 / TDLBFD-00300201
NO
No
None
This parameter indicates whether to limit S1 interface downlink rate measured in packet per second (pps) in case of LBBP CPU overload. When S1 interface downlink traffic volume NO exceeds LBBP process ability, CPU in LBBP will overload and it will lead to degradation of air interface. This switch can be turned on to limit S1 interface downlink rate. Indicates the number of the cabinet that provides the port on YES which IEEE 802.1X authentication is configured. Indicates the number of the subrack that provides the port on YES which IEEE 802.1X authentication is configured. Indicates the number of the slot that provides the port on which IEEE YES 802.1X authentication is configured. Indicates the type of sub-board that provides the port on YES which IEEE 802.1X authentication is configured.
NO
No
None
NO
No
None
NO
No
None
YES
No
None
YES
No
None
Indicates the number of the port on which IEEE 802.1X authentication is configured.
YES
YES
No
LOFD-003015 / TDLOFD-003015
Indicates the IEEE 802.1X authentication method. Currently, only Extensible Authentication Protocol Transport NO Layer Security (EAPTLS), a unidirectional authentication method, is supported. Indicates the number of abnormal packets received NO during the 802.1X authentication. Indicates the number of IEEE 802.1X authentication failures.
NO
No
LOFD-003015 / TDLOFD-003015
NO
Yes
LOFD-003015 / TDLOFD-003015
NO
NO
Yes
LOFD-003015 / TDLOFD-003015
Indicates the cause of the latest IEEE 802.1X authentication failure or the latest unauthentication where the BS does not initiate the NO authentication. The value of this parameter is deleted after a successful IEEE 802.1X authentication.
NO
Yes
LOFD-003015 / TDLOFD-003015
Indicates the number of received Extensible NO Authentication Protocol (EAP) messages. Indicates the status of IEEE 802.1X authentication. Possible states are as follows: UNAUTHENTICAT ED(Unauthenticated ), AUTHENTICATING (Authenticating), NO AUTHENTIC_SUC CEED(Authenticate Succeed), AUTHENTIC_FAIL( Authenticate Fail), and DHCP_AUTHENTI CATING(DHCP Activation Authenticating). Indicates the number of transmitted Extensible Authentication Protocol (EAP) messages. Indicates the number of successful IEEE 802.1X authentications.
NO
Yes
LOFD-003015 / TDLOFD-003015
NO
Yes
LOFD-003015 / TDLOFD-003015
NO
NO
Yes
LOFD-003015 / TDLOFD-003015
NO
NO
Yes
LOFD-003015 / TDLOFD-003015
Indicates the priority of a DSCP. A larger value of this YES parameter indicates a higher priority. Indicates the priority of a VLAN. A larger value of this NO parameter indicates a higher priority. Indicates the number of the cabinet housing the YES board where an E1/T1 port is located.
YES
No
LBFD-00300201 / TDLBFD-00300201
YES
No
LBFD-003003 / TDLBFD-003003
NO
No
None
Indicates the number of the subrack housing the YES board where the E1/T1 port is located. Indicates the number of the slot housing the board where the E1/T1 port is located. Indicates the number of the E1/T1 port.
NO
No
None
YES
YES
No
None
YES
NO
No
None
Indicates the range of E1/T1 ports. Note that the E1T1 MO with this parameter NO set to ALLPORT is actually not created on the BS. Indicates the working mode of the E1/T1 port. This parameter must be NO set to the same value as that at the peer end.
NO
No
None
NO
No
None
Indicates the frame format used by the NO E1/T1 port.
YES
No
None
Indicates the line coding mode of an E1/T1 port.
NO
YES
No
None
Indicates the clock mode of the E1/T1 port. 1. If the BS extracts the line clock from the E1/T1 port, the clock mode of the E1/T1 port must be set to SLAVE. If the BS provides the line clock for the lowerlevel equipment through the E1/T1 port, the clock mode of the E1/T1 port must be set to MASTER. NO Otherwise, the line clock may fail to work properly. 2. When the E1/T1 port provides an 8K clock reference for the transmission interface board, the clock mode of the E1/T1 port must be set to SLAVE. 3. The clock modes of E1/T1 ports used by an inter-board MLPPP group cannot be all set to SLAVE.
NO
No
None
Indicates the link running status. The link running status is classified into OK, LOCAL_LOOP, REMOTE_LOOP, PAYLOAD_LOOP, NO SINGLE_CH_LOO P, PHYSICAL_LOOP, LOS, AIS, RA, LFA, LMFA, SLIP, BACKUP, and OTHERS.
NO
Yes
None
Indicates whether to perform the link test and the test type. The test types are NO classified into No Test, Offline Test, and Online Test. Indicates whether the E1/T1 port is used. Indicates the left loop time of the E1/T1 port.
NO
Yes
None
NO
NO
Yes
None
NO
NO
Yes
None
Indicates the type of sub-board on the board where the YES E1/T1 port is located.
YES
No
None
Indicates the in-use work mode of the NO E1/T1 port.
NO
Yes
None
Indicates the in-use frame format of the NO E1/T1 port.
NO
Yes
None
Indicates the in-use line coding mode of NO the E1/T1 port.
NO
Yes
None
Indicates the BER threshold.
NO
NO
No
None
Indicates the cabinet number of the board where the YES Ethernet port is located. Indicates the subrack number of the board where the YES Ethernet port is located. Indicates the slot number of the board YES where the Ethernet port is located.
NO
No
LOFD-00300401 / TDLOFD-00300401
NO
No
LOFD-00300401 / TDLOFD-00300401
YES
No
LOFD-00300401 / TDLOFD-00300401
Indicates the type of sub-board on the board where the YES Ethernet port is located.
YES
No
LOFD-00300401 / TDLOFD-00300401
Indicates the type of YES the Ethernet port.
YES
No
LOFD-00300401 / TDLOFD-00300401
Indicates the number of the Ethernet port.
YES
YES
No
LOFD-00300401 / TDLOFD-00300401
Indicates the work mode of the IEEE802.3ah Ethernet OAM. If this parameter is set to ACTIVE, the local end initiates the IEEE802.3ah Ethernet OAM negotiation. NO If this parameter is set to PASSIVE, the local end does not initiate the negotiation; instead, the local end waits for receiving negotiation packets from the peer end.
NO
No
LOFD-00300401 / TDLOFD-00300401
Indicates the internal at which a Protocol Data Unit (PDU) is transmitted for fault detection. A NO shorter interval indicates that Ethernet link faults can be detected more quickly. Indicates the size of the Protocol Data NO Unit (PDU). Indicates whether remote loopback can be enabled at the port where 3AH detection is activated. If remote loopback is enabled, the OAM 3AH loopback is allowed. For details, see the STR NO ETHOAMLOOPTST command. During the loopback, only 3AH packets rather than other types of packet can be transmitted. If remote loopback is disabled, the local end cannot initiate the loopback. Indicates whether to enable indication of NO link faults. Indicates the duration of the NO erroneous frame event.
NO
No
LOFD-00300401 / TDLOFD-00300401
NO
No
LOFD-00300401 / TDLOFD-00300401
NO
No
LOFD-00300401 / TDLOFD-00300401
NO
No
NO
No
Indicates the threshold for the erroneous frame event. If the number of erroneous frames within a second NO exceeds the threshold, an erroneous frame event occurs. This event is checked every other second. Indicates the duration of the Error Frame Seconds Summary Event. An error frame second NO refers to a second within which one or more error frames are detected. Indicates the threshold for the accumulated erroneous frame event. If the length of time that erroneous frames occupy within a sampling period specified through the ERRFRMSCDEVT PRD parameter exceeds the threshold, an accumulated erroneous frame event occurs.
NO
No
LOFD-00300401 / TDLOFD-00300401
NO
No
LOFD-00300401 / TDLOFD-00300401
NO
NO
No
LOFD-00300401 / TDLOFD-00300401
Indicates the Finite State Machine NO (FSM) status of an Ethernet OAM 3AH.
NO
Yes
LOFD-00300401 / TDLOFD-00300401
Indicates the number of discarded OAM PDUs on the RX channel. Indicates the number of received Event OAM PDUs. Indicates the number of received Fault OAM PDUs. Indicates the number of Info OAM PDUs received on a port.
NO
NO
Yes
NO
NO
Yes
NO
NO
Yes
NO
NO
Yes
Indicates the number of received NO Loopback Control OAM PDUs. Indicates the total number of received OAM PDUs, including the information OAM NO PDUs, event OAM PDUs, loopback OAM PDUs, and discarded OAM PDUs. Indicates the number of NO discarded OAM PDUs on the TX channel.
NO
Yes
LOFD-00300401 / TDLOFD-00300401
NO
Yes
LOFD-00300401 / TDLOFD-00300401
NO
Yes
LOFD-00300401 / TDLOFD-00300401
Indicates the number of transmitted Event OAM PDUs. The Event OAM PDUs are used to notify the peer end of a link event. Indicates the number of transmitted Fault OAM PDUs. The Fault OAM PDUs are used to notify the peer end of a link failure.
NO
NO
Yes
LOFD-00300401 / TDLOFD-00300401
NO
NO
Yes
LOFD-00300401 / TDLOFD-00300401
Indicates the number of transmitted Info OAM Protocol Data NO Units (PDUs). The Info OAM PDUs are used to finish the search process. Indicates the number of transmitted loopback OAM PDUs. The loopback OAM PDUs are used for remote loopback control.
NO
Yes
LOFD-00300401 / TDLOFD-00300401
NO
NO
Yes
LOFD-00300401 / TDLOFD-00300401
Indicates the total number of transmitted OAM PDUs, including the information OAM NO PDUs, event OAM PDUs, loopback OAM PDUs, and discarded OAM PDUs. Indicates the cabinet number of the board where the YES Ethernet port is located.
NO
Yes
LOFD-00300401 / TDLOFD-00300401
NO
No
None
Indicates the subrack number of the board where the YES Ethernet port is located.
NO
No
None
Indicates the slot number of the board YES where the Ethernet port is located.
YES
No
None
Indicates the type of sub-board on the board where the YES Ethernet port is located.
YES
No
None
Indicates the number of the Ethernet port.
YES
YES
No
None
Indicates whether an Ethernet port is an electrical port or optical port. When the system starts, the system binds an Ethernet port to an optical port NO preferentially if the default value of the port attribute is AUTO. If the BS does not support cascading, the port attribute is set to AUTO. Indicates the maximum transmission unit (MTU) for the Ethernet port. It specifies the maximum size of the IP packet (including the IP header) that can flow through the Ethernet port. A value equal to or larger than 576 is recommended, because broadcast packets, such as NO the DHCP packet, may experience reception or transmission failures if the MTU is smaller than 576. After the Ethernet port is added to an Ethernet trunk, this parameter stops taking effect and the actual MTU for the Ethernet port depends on the setting of the same parameter in the Ethernet trunk.
YES
No
None
NO
No
None
Indicates the speed mode of the Ethernet port. This parameter must be set to the same value as that of the peer port. GE electrical ports support 1000 Mbit/s only when working in auto-negotiation mode. If SPEED of NO a GE optical port is set to AUTO, the port works at 1000 Mbit/s in autonegotiation mode. If SPEED of a GE optical port is set to 1000M, the port works at 1000 Mbit/s in manual configuration mode.
NO
No
None
Indicates the duplex mode of the NO Ethernet port.
NO
No
None
Indicates whether to enable the proxy ARP function. If this function is enabled, the BS serves as an ARP proxy for the IP address of a loopback interface on the BS or a port IP address of a lower-level BS. If this function is disabled, an external device can access a loopback interface in the BS or a lower-level BS NO on the same subnet only by using a route. After the Ethernet port is added to an Ethernet trunk, this parameter stops taking effect and whether the proxy ARP function is enabled for the Ethernet port depends on the setting of the same parameter in the Ethernet trunk.
NO
No
None
Indicates whether to enable flow control on the Ethernet port. Flow control is implemented to prevent congestion. When flow control is enabled, the RX end repeatedly sends PAUSE frames to the TX end, instructing the NO TX end to lower the TX rate if congestion occurs on the RX end. Upon receiving PAUSE frames, the TX end stops sending data during a period of time to prevent congestion. For details, see IEEE 802.3ah. Indicates the generation threshold for the MAC Excessive Frame Error Rate alarm (ID: 25881). When the number NO of erroneous MAC frames exceeds this threshold, the MAC Excessive Frame Error Rate alarm is reported. Indicates the clearance threshold for the MAC Excessive Frame Error Rate alarm (ID: 25881). When the number of NO erroneous MAC frames falls below this threshold, the MAC Excessive Frame Error Rate alarm is cleared.
NO
No
None
NO
No
None
NO
No
None
Indicates the MAC address (six bytes) configured for the Ethernet port. The format is XXXXXXXX-XXXX.
NO
NO
Yes
None
Indicates the status NO of the Ethernet port.
NO
Yes
None
Indicates the loopback status of the Ethernet port.
NO
NO
Yes
None
Indicates whether the Ethernet port is in the steady state of the OAM 3AH NO loopback response. For details, see IEEE 802.3ah. Indicates whether the Ethernet OAM 3AH is enabled. Indicates the number of packets received at the Ethernet port. Indicates the number of bytes received at the Ethernet port. Indicates the number of CRC error packets received at the Ethernet port. NO
NO
Yes
None
NO
Yes
None
NO
NO
Yes
None
NO
NO
Yes
None
NO
NO
Yes
None
Indicates the traffic received at the NO Ethernet port. Indicates the number of packets NO transmitted at the Ethernet port. Indicates the number of bytes NO transmitted at the Ethernet port. Indicates the traffic transmitted at the NO Ethernet port.
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
Indicates the number of IP addresses configured for the Ethernet port. Indicates the IP address and mask list configured for the Ethernet port.
NO
NO
Yes
None
NO
NO
Yes
None
Indicates the negotiation mode NO configured on the Ethernet port. Indicates the actual negotiation mode of NO the Ethernet port. Indicates the speed mode of the Ethernet port. This parameter must be NO set to the same value as that of the peer port. Indicates the duplex mode of the Ethernet port. If an Ethernet electrical port is used, this parameter is valid NO when SPEED is not set to AUTO. If an Ethernet optical port is used, this parameter must be set to FULL. Indicates the negotiation mode of NO the NE connecting to the Ethernet port.
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
Indicates the speed mode of the NE NO connecting to the Ethernet port.
NO
Yes
None
Indicates the duplex mode of the NE NO connecting to the Ethernet port.
NO
Yes
None
Indicates the physical layer status NO of the Ethernet port. Indicates the cabinet number of the board where the YES Ethernet trunk is established. Indicates the number of the subrack housing the YES board where the Ethernet trunk is established. Indicates the number of the slot housing the board YES where the Ethernet trunk is established. Indicates the number of the Ethernet trunk.When the board is a UTRPc board, the value of this parameter YES ranges from 0 to 2. When the board is a board other than the UTRPc board, the value of this parameter ranges from 0 to 1.
NO
Yes
None
NO
No
LOFD-003008 / TDLOFD-003008
NO
No
LOFD-003008 / TDLOFD-003008
YES
No
LOFD-003008 / TDLOFD-003008
NO
No
LOFD-003008 / TDLOFD-003008
Indicates the type of Ethernet trunk. If this parameter is set to DISABLE, member ports of the Ethernet trunk must be manually configured. In this case, the configured member ports are considered as valid member ports of the Ethernet trunk. NO If this parameter is set to ENABLE, member ports of the Ethernet trunk must also be manually configured. In this case, the valid member ports of the Ethernet trunk are negotiated between the BS and the peer end according to LACP.
NO
No
LOFD-003008 / TDLOFD-003008
Indicates whether to enable the ARP proxy function on the Ethernet trunk. If this parameter is set to ENABLE, the BS performs the ARP proxy on the IP addresses of its loopback interfaces (or of the lowerlevel BS). If this parameter is set to NO DISABLE, the BS does not perform the ARP proxy on the IP addresses of its loopback interfaces (or of the lower-level BS). The external device on the same subnet needs to access the IP address through a configured route.
NO
No
LOFD-003008 / TDLOFD-003008
Indicates the type of subboard on the board where the YES Ethernet trunk is established.
YES
No
LOFD-003008 / TDLOFD-003008
Indicates the size of the Maximum Transmission Unit (MTU) in the Ethernet trunk. The recommended MTU value is above 576. NO If the value is smaller than 576, broadcast packets such as the DHCP packet fail to be received or transmitted.
NO
No
LOFD-003008 / TDLOFD-003008
Indicates the status of the Ethernet trunk. The state of the Ethernet trunk depends on the state of the member ports. If the state of NO the member ports of the existing Ethernet trunk is activated, the state of the Ethernet trunk is activated.
NO
Yes
LOFD-003008 / TDLOFD-003008
Indicates the MAC address of the Ethernet trunk. The format is XXXXXXXX-XXXX. The NO MAC address of an Ethernet port is that of the first Ethernet port added to the Ethernet trunk. Indicates the MAC address of the Ethernet trunk at the peer end. The format is XXXXXXXX-XXXX. If the Ethernet trunk type is set to ENABLE, this parameter NO specifies the MAC address of the peer end, which is negotiated between the BS and the peer end by using the LACP protocol. For details, see IEEE 802.3ad. Indicates the number of member NO ports in the Ethernet trunk. Indicates the number of the NO member port of the Ethernet trunk. Indicates the number of active NO member ports of the Ethernet trunk. Indicates the number of an active NO member port of the Ethernet trunk. Indicates the number of packets (including the NO discarded packets) received by the Ethernet trunk.
NO
Yes
LOFD-003008 / TDLOFD-003008
NO
Yes
LOFD-003008 / TDLOFD-003008
NO
Yes
LOFD-003008 / TDLOFD-003008
NO
Yes
LOFD-003008 / TDLOFD-003008
NO
Yes
LOFD-003008 / TDLOFD-003008
NO
Yes
LOFD-003008 / TDLOFD-003008
NO
Yes
LOFD-003008 / TDLOFD-003008
Indicates the number of bytes (including the discarded bytes) received by the Ethernet trunk. Indicates the number of discarded packets received by the Ethernet Indicates trunk. the
NO
NO
Yes
LOFD-003008 / TDLOFD-003008
NO
NO
Yes
LOFD-003008 / TDLOFD-003008
number of NO discarded bytes received by the Ethernet trunk. Indicates the number of packets (including the NO discarded packets) transmitted by the Ethernet trunk. Indicates the number of bytes (including the discarded bytes) transmitted by the Ethernet trunk. Indicates the number of discarded packets transmitted by the Ethernet trunk. Indicates the number of discarded bytes transmitted by the Ethernet trunk. Indicates the number of IP addresses configured for the Ethernet trunk. Indicates the IP address list of the Ethernet trunk.
NO
Yes
LOFD-003008 / TDLOFD-003008
NO
Yes
LOFD-003008 / TDLOFD-003008
NO
NO
Yes
LOFD-003008 / TDLOFD-003008
NO
NO
Yes
LOFD-003008 / TDLOFD-003008
NO
NO
Yes
LOFD-003008 / TDLOFD-003008
NO
NO
Yes
LOFD-003008 / TDLOFD-003008
NO
NO
Yes
LOFD-003008 / TDLOFD-003008
Indicates the number of the cabinet housing the board where the YES member port of an Ethernet trunk is located.
NO
No
LOFD-003008 / TDLOFD-003008
Indicates the number of the subrack housing the board where the YES member port of an Ethernet trunk is located. Indicates the number of the slot housing the board where the member port of an Ethernet trunk is located. Indicates the number of the parent Ethernet trunk of the port.
NO
No
LOFD-003008 / TDLOFD-003008
YES
YES
No
LOFD-003008 / TDLOFD-003008
YES
NO
No
LOFD-003008 / TDLOFD-003008
Indicates the number of the member port in an Ethernet trunk.
YES
YES
No
LOFD-003008 / TDLOFD-003008
Indicates the priority of the member port in an Ethernet trunk. NO A smaller parameter value indicates a higher priority. Indicates whether the member port is the primary port of an Ethernet trunk. Each Ethernet trunk has one and only one primary port. NO The primary port must be the first port added to an Ethernet trunk and the last port removed from the Ethernet trunk.
NO
No
LOFD-003008 / TDLOFD-003008
YES
No
LOFD-003008 / TDLOFD-003008
Indicates the type of sub-board on the board where the YES member port of an Ethernet trunk is located.
YES
No
LOFD-003008 / TDLOFD-003008
Indicates the status of the member port NO in an Ethernet trunk. Indicates the MAC address of the member port when being added to an NO Ethernet trunk. The format of the MAC address is XXXXXXXX-XXXX. Indicates the period mode of transmitting the LACP Protocol Data Units (PDUs) at the local end. In long NO period mode, the time interval for periodically transmitting the LACP PDUs is large. Indicates the period mode of transmitting the NO LACP PDUs at the peer end. Indicates the number of received LACP PDUs on the NO member port of an Ethernet trunk.
NO
Yes
LOFD-003008 / TDLOFD-003008
NO
Yes
LOFD-003008 / TDLOFD-003008
NO
Yes
LOFD-003008 / TDLOFD-003008
NO
Yes
LOFD-003008 / TDLOFD-003008
NO
Yes
LOFD-003008 / TDLOFD-003008
Indicates the number of transmitted LACP PDUs on the member port of an Ethernet trunk.
NO
NO
Yes
LOFD-003008 / TDLOFD-003008
Indicates the number of the YES extension user data type. Indicates the ID of the transport parameter group related to the NO services corresponding to an extended QCI. Indicates the ID of the transport parameter group related to the service that YES corresponds to the extended QCI. It uniquely identifies a transport parameter group. Indicates the priority of the service data, which is identified by a DSCP value. The priority of the NO service data has a positive correlation with the DSCP value. Indicates the activity factor of the services NO corresponding to an extended QCI.
YES
No
None
YES
No
None
YES
No
None
YES
No
None
NO
No
None
Indicates the type of primary transport resource used to transmit the user date when hybrid transmission is adopted. HQ indicates that highquality transport resources are used, while LQ indicates that low-quality transport resources NO are used. When a new service requests admission and admission control is performed, one of the IP path routes with transport resources of the same quality is used as the primary transport path. Indicates the primary port load threshold of the user data in the hybrid transmission NO scenario. A larger value indicates that services are more likely to be admitted to the primary path. Indicates the primary-tosecondary port load ratio threshold of user data in the hybrid transmission NO scenario. A smaller value indicates that services are more likely to be admitted to the primary path.
YES
No
None
YES
No
None
YES
No
None
Indicates the type of the flood packet to YES be measured.
YES
No
LOFD-003014 / TDLOFD-003014
Indicates whether to enable the protection against NO excessive flood packets.
NO
No
LOFD-003014 / TDLOFD-003014
Indicates the threshold for starting the protection against excessive flood packets. If the DFDSW parameter is set to ENABLE, the system discards the extra packets when the RX rate of NO flood packets exceeds the threshold. It is recommended that the difference between Defend Threshold and Alarm Threshold is greater than 3% of Defend Threshold.
YES
No
LOFD-003014 / TDLOFD-003014
Indicates whether to report an alarm when the local end NO receives excessive flood packets from the peer end.
NO
No
LOFD-003014 / TDLOFD-003014
Indicates the threshold for the excessive flood packet alarm. If the ALMSW parameter is set to ENABLE, the system measures the RX rate of flood packets every 10 seconds. If the measured value exceeds the threshold, an excessive flood NO packet alarm is reported. The alarm is cleared if the RX rate of flood packets keeps below the threshold for five consecutive minutes. It is recommended that the difference between Defend Threshold and Alarm Threshold is greater than 3% of Defend Threshold. Indicates the number of packets discarded because the number of flood NO packets exceeds the specified threshold. Indicates the total number of received NO attack packets.
YES
No
LOFD-003014 / TDLOFD-003014
NO
Yes
LOFD-003014 / TDLOFD-003014
NO
Yes
LOFD-003014 / TDLOFD-003014
Indicates the switch used to control whether to allocate bandwidths to transmission resource groups on the physical port based on their scheduling weights. When RATECFGTYPE (the rate configuration type) is set to SINGLE_RATE, different values of this parameter lead NO to different bandwidth allocation methods as follows: (1) If this parameter is set to DISABLE and the sum of TX bandwidths of the associated resource groups exceeds the bandwidth of the physical port, each resource group is allocated a bandwidth that is directly proportional to its configured TX
NO
No
LOFD-00301101 / TDLOFD-00301101
Indicates the rate configuration mode of transmission resource groups in the BS, which can be set to SINGLE_RATE or DUAL_RATE. The dual rate configuration refers to the hybrid of the peak information rate (PIR) and committed information rate (CIR). If this parameter is set to NO SINGLE_RATE, the transmission resource group performs traffic shaping based on its transmit bandwidth. If this parameter is set to DUAL_RATE, the transmission resource group performs traffic shaping based on PIR and the transmission admission algorithm ensures that the Indicates the interval between the time single-hop BFD detects that the state of the active route NO changes from DOWN to UP and the time the active route becomes available. Indicates the IKE local name.
NO
No
LOFD-003011 / TDLOFD-003011
NO
No
LOFD-003011 / TDLOFD-003011
NO
NO
No
LOFD-003009 / TDLOFD-003009
Indicates the time interval for sending the keepalive packets. If the NO parameter is set to 0, keepalive packets are not sent. Indicates the timeout duration for waiting for the keepalive packets. NO If this parameter is set to 0, keepalive packets are not sent. Indicates the DSCP for IKE negotiation NO packets. Indicates the cabinet number of NO the IKE local board. Indicates the subrack number of NO the IKE local board. Indicates the slot number of the IKE NO local board.
NO
No
LOFD-003009 / TDLOFD-003009
NO
No
LOFD-003009 / TDLOFD-003009
NO
No
NO
Yes
NO
Yes
NO
Yes
Indicates the name YES of the IKE peer.
YES
No
LOFD-003009 / TDLOFD-003009
Indicates the ID of the IKE proposal in NO use.
YES
No
LOFD-003009 / TDLOFD-003009
Indicates the IKE protocol version.
NO
NO
No
LOFD-003009 / TDLOFD-003009
Indicates the IKE exchange mode. In main mode, keys are exchanged independently from identity authentications. This protects NO identity information and hence enhances security. The aggressive mode does not have identity authentication protection. Indicates the type of the identification payload that the local end transmits. The authentication NO can be performed based on IP or fully qualified domain name (FQDN). Indicates the IP address of the peer end. When the encapsulation mode of the IPSec proposal is the transmission mode, the IP address of NO the IKE peer must be the same as the destination IP address of the ACL rule. If they are different, encoded packets will fail to be decoded.
NO
No
LOFD-003009 / TDLOFD-003009
YES
No
LOFD-003009 / TDLOFD-003009
YES
No
LOFD-003009 / TDLOFD-003009
Indicates the name NO of the peer end.
YES
No
LOFD-003009 / TDLOFD-003009
Indicates the preshared key. The two negotiation ends must be configured with the same authenticator. This parameter takes effect only when NO Authentication Method in the corresponding IKEPROPOSAL is set to PRE_SHARED_KE Y. Indicates whether to enable the dead NO peer detection (DPD) function. Indicates the DPD idle time. If the local end does not receive encrypted packets for a time defined by this parameter, it sends a DPD packet to NO perform dead peer detection. The interval for sending a DPD packet slightly varies in various network environments. Indicates the interval at which DPD detection frames are sent. The interval at which DPD detection frames NO are sent may slightly vary in various network environments such as network congestion, delay, and jitter. Indicates the number of retransmission NO attempts after a DPD detection fails.
YES
No
LOFD-003009 / TDLOFD-003009
NO
No
LOFD-003009 / TDLOFD-003009
NO
No
LOFD-003009 / TDLOFD-003009
NO
No
LOFD-003009 / TDLOFD-003009
NO
No
LOFD-003009 / TDLOFD-003009
Indicates the IP address of the local end, which is used in IKE negotiation. This IP address can be set to 0.0.0.0 or a configured interface IP address at the local end. If this parameter is set to 0.0.0.0, the BS automatically uses the interface IP address to negotiate with the peer. If multiple IP addresses are NO configured at the port, it is recommended that you specify one IP address for the negotiation. If the local BS uses the digital certificate and IP address for authentication in the negotiation, ensure that the IP address in the certificate is the same as the local IP address of the BS. Indicates the cabinet number of NO the IKE peer board. Indicates the subrack number of NO the IKE peer board. Indicates the slot number of the IKE NO peer board.
NO
No
LOFD-003009 / TDLOFD-003009
NO
Yes
NO
Yes
NO
Yes
Indicates the name of the IPv6 IKE YES peer.
YES
No
Indicates the ID of the security proposal used by an NO IPv6 IKE negotiation.
YES
No
Indicates the protocol version of the IPv6 IKE.
NO
NO
No
Indicates the IPv6 IKE negotiation mode. In main mode, keys are exchanged independently from identity authentications. This protects identity information and hence NO enhances security. The aggressive mode does not have identity authentication protection. This mode, however, meets the requirements in specific network environments. Indicates the type of the identification payload that the local end transmits in IPv6 networks. The authentication NO can be performed based on IPv6 address or fully qualified domain name (FQDN).
NO
No
YES
No
Indicates the IPv6 address of the peer end. If the encapsulation mode of an IPSec proposal is set to TRANSPORT, the peer IPv6 address NO must be the same as the destination IPv6 address of the ACL rule. Otherwise, encrypted packets fail to be decrypted.
YES
No
Indicates the peer name used by an IPv6 IKE negotiation.
NO
YES
No
Indicates the authenticator of the pre-shared key in IPv6 networks. The NO two negotiation ends must be configured with the same authenticator. Indicates whether to enable the Dead Peer Detection NO (DPD) function in IPv6 networks.
YES
No
NO
No
Indicates the IPv6 DPD idle time. If the local end does not receive encrypted packets for a period specified by this parameter, it sends NO a DPD packet to perform dead peer detection. Time required to transmit DPD packets varies with network conditions. Indicates the interval for sending the IPv6 DPD detection frame. The interval at which IPv6 DPD detection frames NO are sent may slightly vary in various network environments such as network congestion, delay, and jitter. Indicates the number of retransmissions NO after the IPv6 DPD detection fails.
NO
No
NO
No
NO
No
Indicates the IPv6 address that is used by the local end in IPv6 IKE negotiation. This IP address can be set to either 0:0:0:0:0:0:0:0 or a device IPv6 address configured at the local end. If this parameter is set to 0:0:0:0:0:0:0:0, the BS NO automatically uses a local interface IP address to negotiate with the peer end. If multiple interface IPv6 addresses are configured for a port, it is recommended that this parameter be set to one of the IP addresses. Indicates the cabinet number of the IPv6 IKE peer board. Indicates the subrack number of the IPv6 IKE peer board.
NO
No
NO
NO
Yes
LBFD-003006 / TDLBFD-003006 LOFD-003024 / TDLOFD-003024 LBFD-003006 / TDLBFD-003006 LOFD-003024 / TDLOFD-003024 LBFD-003006 / TDLBFD-003006 LOFD-003024 / TDLOFD-003024
NO
NO
Yes
Indicates the slot number of the IPv6 NO IKE peer board.
NO
Yes
Indicates the ID of the IKE proposal.
YES
YES
No
LOFD-003009 / TDLOFD-003009
Indicates the encryption algorithm used in the IKE proposal. The Data Encryption Standard (DES) is an internationally used data encryption algorithm, which uses a 56-bit key. The 3DES is also an internationally used encryption algorithm, which NO uses a 168-bit key. The Advanced Encryption Standard (AES) is an advanced encryption algorithm, which provides three types of key of different lengths: 128, 192, and 256 bits. Thus, different protection levels are available. For details, see RFC2401.
NO
No
LOFD-003009 / TDLOFD-003009
Indicates the authentication algorithm used in the IKE proposal. The MessageDigest Algorithm 5 (MD5) uses a 128bit secret key, whereas the Secure Hash Algorithm 1 (SHA1) uses a 160bit secret key. The MD5 algorithm NO supports faster calculation but lower security than the SHA1 algorithm. For details, see RFC2409. The AESXCBC-MAC-96 algorithm is used only in IKEv2. For details about this algorithm, see RFC3566.
NO
No
LOFD-003009 / TDLOFD-003009
Indicates the authentication mode used in the IKE NO proposal. For details, see RFC2409.
NO
No
LOFD-003009 / TDLOFD-003009
Indicates the DiffieHellman (DH) group of the IKE proposal. The core technology used in an IKE proposal is the Diffie-Hellman (DH) exchange technology. The DH exchange technology is used NO to calculate private information based on public information. It is mathematically proven that decrypting the DH information is impractical due to calculation complexity.
NO
No
LOFD-003009 / TDLOFD-003009
Indicates the life cycle of an ISAKMP SA. ISAKMP refers to Internet Security Association and Key Management Protocol, and SA refers to security association. IKE negotiation requires a long time to calculate DiffieHellman (DH) keys. It is recommended that this parameter be set to greater than 10 minutes so NO that the update of the ISAKMP SA does not affect the secure communication. Before the SA life cycle elapses, local and peer ends will negotiate with each other to generate a new SA to replace the original one. The new SA is used upon completion of the negotiation, and the original SA is automatically Indicates the Pseudo-random Function (PRF) algorithm used in IKEv2. The PRF algorithm is used to generate the NO materials required for IKE authentication and encryption. For details about how to generate materials, see RFC4306. Indicates the cabinet number of the board that adopts the IKE security proposal.
NO
No
LOFD-003009 / TDLOFD-003009
NO
No
LOFD-003009 / TDLOFD-003009
NO
NO
Yes
LOFD-003009 / TDLOFD-003009
Indicates the subrack number of the board that adopts the IKE security proposal.
NO
NO
Yes
LOFD-003009 / TDLOFD-003009
Indicates the slot number of the board NO that adopts the IKE security proposal. Indicates the number of the cabinet housing the board where a YES transmission resource group is established. Indicates the number of the subrack that houses the board where a YES transmission resource group is established. Indicates the number of the slot corresponding to the board where a transmission resource group is established.
NO
Yes
LOFD-003009 / TDLOFD-003009
NO
No
MRFD-231501 LOFD-003002 / TDLOFD-003002
NO
No
MRFD-231501 LOFD-003002 / TDLOFD-003002
YES
YES
No
MRFD-231501 LOFD-003002 / TDLOFD-003002
Indicates the ID of a transmission YES resource group.
NO
No
MRFD-231501 LOFD-003002 / TDLOFD-003002
Indicates the destination IP YES address of passingby traffic.
YES
No
MRFD-231501 LOFD-003002 / TDLOFD-003002
Indicates the subnet mask of the destination IP address of the YES service traffic bound to a transmission resource group.
YES
No
MRFD-231501 LOFD-003002 / TDLOFD-003002
Indicates the bearer type of transmission YES resource group.
NO
No
MRFD-231501 LOFD-003002 / TDLOFD-003002
Indicates the type of sub-board on the board where a YES transmission resource group is established.
YES
No
MRFD-231501 LOFD-003002 / TDLOFD-003002
Indicates the type of port where a transmission YES resource group is carried.
YES
No
MRFD-231501 LOFD-003002 / TDLOFD-003002
YES
NO
No
MRFD-231501 LOFD-003002 / TDLOFD-003002
Indicates whether to perform ARP spoofing checks. If this parameter is set to ENABLE, an alarm is reported when ARP spoofing NO attacks occur. If this parameter is set to DISABLE, no alarm is reported when ARP spoofing attacks occur.
NO
No
LOFD-003014 / TDLOFD-003014
Indicates the ARP spoofing alarm threshold. When the ARP spoofing check switch is turned on, an ARP spoofing alarm is reported if the number of ARP update attempts reaches this threshold within one NO minute. Note that the number of ARP update attempts from trusted MAC addresses is not counted. This alarm is cleared if no ARP update attempt is made in one minute after the ARP spoofing alarm is reported. Indicates whether to enable APR learning strict. ARP learning strict is a function that enables a BS to learn the acknowledgement packets in response NO to only ARP request packets sent by itself. With ARP learning strict, the BS can reject most ARP request and acknowledge packet attacks.
NO
No
LOFD-003014 / TDLOFD-003014
NO
No
LOFD-003014 / TDLOFD-003014
Indicates whether to report an alarm when the number of invalid packets received by a BS exceeds the specified threshold. If this parameter is set to ENABLE, an alarm is reported when the number of invalid packets received by a BS exceeds the NO specified threshold. If this parameter is set to DISABLE, no alarm is reported when the number of invalid packets received by a BS exceeds the specified threshold. Invalid packets are those filtered according to the packet filter criteria. Indicates the threshold for the excessive flood packet alarm. When Invalid Packet Check Switch is set to ENABLE, the system measures the RX rate of invalid packets every 10 seconds. If the measured value NO exceeds this threshold, an excessive invalid packet alarm is reported. The alarm is cleared if the RX rate of invalid packets keeps below the threshold for 5 consecutive minutes.
NO
No
LOFD-003014 / TDLOFD-003014
NO
No
LOFD-003014 / TDLOFD-003014
Indicates whether to detect IPSec packet NO replay. Indicates the IPSec anti-replay alarm NO threshold.
NO
No
LOFD-003014 / TDLOFD-003014
NO
No
LOFD-003014 / TDLOFD-003014
Indicates the type of NO physical port.
NO
Yes
LOFD-003014 / TDLOFD-003014
Indicates the number of a port. Indicates the source MAC address of an invalid packet. Indicates the destination MAC address of an invalid packet. Indicates the VLAN ID of an invalid packet.
NO NO
NO NO
Yes Yes
NO
NO
Yes
NO
NO
Yes
Indicates the type of MAC-layer protocol used by an invalid packet. A BS interprets only the supported MACNO layer protocols and only displays the protocol numbers of other MAC-layer protocols. Indicates the source IP address of an NO invalid packet. Indicates the destination IP NO address of an invalid packet.
NO
Yes
LOFD-003014 / TDLOFD-003014
NO
Yes
NO
Yes
Indicates the protocol used at the IP layer of an invalid packet. A BS interprets only the supported IP-layer NO protocols and only displays the protocol numbers of other IP-layer protocols. Indicates the source port number of an NO invalid packet. Indicates the destination port NO number of an invalid packet. Indicates at most the first 64 bytes of NO an invalid packet. Indicates the index of the IPv6 interface. YES
NO
Yes
LOFD-003014 / TDLOFD-003014
NO
Yes
LOFD-003014 / TDLOFD-003014 LOFD-003014 / TDLOFD-003014 LOFD-003014 / TDLOFD-003014 LBFD-003006 / TDLBFD-003006
NO
Yes
NO
Yes
YES
No
Indicates the type of the IPv6 interface, NO which can be set to NORMAL or VLAN. Indicates the number of the cabinet housing the NO board where the IPv6 interface is located. Indicates the subrack number of the board where the NO IPv6 interface is located. Indicates the slot number of the board NO where the IPv6 interface is located. Indicates the type of sub-board on the board where the NO IPv6 interface is located.
NO
No
LBFD-003006 / TDLBFD-003006
NO
No
LBFD-003006 / TDLBFD-003006
NO
No
LBFD-003006 / TDLBFD-003006
YES
No
LBFD-003006 / TDLBFD-003006
YES
No
LBFD-003006 / TDLBFD-003006
Indicates the port type of IPv6 interface.
NO
YES
No
LBFD-003006 / TDLBFD-003006
Indicates the port number of the IPv6 NO interface.
YES
No
LBFD-003006 / TDLBFD-003006
Indicates the ID of the VLAN-type IPv6 NO interface. Indicates the maximum NO transmission unit of the IPv6 interface. Indicates whether an IPv6 interface is NO already activated. Indicates the valid link-local address of NO an IPv6 interface. Indicates the number of valid global unicast addresses of an IPv6 interface.
YES
No
LBFD-003006 / TDLBFD-003006
NO
No
NO
Yes
NO
Yes
NO
NO
Yes
LBFD-003006 / TDLBFD-003006
Indicates the list of valid global unicast NO addresses of an IPv6 interface. Indicates the number of valid NO multicast addresses of an IPv6 interface. Indicates the list of valid multicast addresses of an IPv6 interface. NO
NO
Yes
LBFD-003006 / TDLBFD-003006
NO
Yes
LBFD-003006 / TDLBFD-003006
NO
Yes
LBFD-003006 / TDLBFD-003006
Indicates whether to enable the IPv6 interface to detect NO address conflicts during neighbor discovery. Indicates the number of detection times during the NO neighbor discovery procedure of the IPv6 interface. Indicates the time for the IPv6 interface to start a NO neighbor discovery procedure. Indicates the interval between the time the IPv6 interface reinitiates neighbor discovery NO and the time neighbor discovery fails or the ND table entry becomes invalid. Indicates whether to enable the IPv6 interface to NO automatically generate a link local address. Indicates the stateless automatic configuration switch NO of the IPv6 interface. Indicates the ID of an IP path. YES
NO
Yes
LBFD-003006 / TDLBFD-003006
NO
Yes
LBFD-003006 / TDLBFD-003006
NO
Yes
LBFD-003006 / TDLBFD-003006
NO
Yes
LBFD-003006 / TDLBFD-003006
NO
Yes
LBFD-003006 / TDLBFD-003006
NO
Yes
LBFD-003006 / TDLBFD-003006
YES
No
None
Indicates the cabinet number of NO the board where the IP path is located. Indicates the subrack number of NO the board where the IP path is located.
NO
No
None
NO
No
None
Indicates the slot number of the board NO where the IP path is located.
YES
No
None
Indicates the physical port type of NO the IP path.
YES
No
None
Indicates the number of the NO physical port of the IP path.
NO
No
None
Indicates the type of the IP path. QOS indicates that this IP path is used to carry the service with specified Quality of Service (QoS), that is, with a specified NO DSCP. ANY indicates that this IP Path can be used to carry services of any QoS and hence is used to carry the service without a specified DSCP.
NO
No
None
Indicates the differentiated services code point NO (DSCP) of the services carried on an IP path.
YES
No
None
Indicates the local IP address of an IP path. The value 0.0.0.0 indicates NO that the local IP address needs to be negotiated.
YES
No
None
Indicates the peer IP address of the IP NO path.
YES
No
None
Indicates the ID of the adjacent signaling point to which the IP path belongs. This parameter is valid only when the APPTYPE parameter is set to NO X2 and must be set to the ID of the associated X2 interface. Note that the SCTP link referenced by this X2 interface must be an IPv4 SCTP link.
YES
No
None
Indicates the type of transport resource for the IP path. The value HQ indicates high-quality transport resources, and the value LQ indicates low-quality NO transport resources. This parameter must be set in the hybridtransmission scenario. In other scenarios, the default value of this parameter is used. Indicates the application type of IP path.
NO
No
None
NO
YES
No
None
Indicates whether to enable the PING detection to check the IP path. The PING detection is used to check the connectivity of an IP path. If the PING detection is disabled in the firewall located in the transport network or in the NO CN equipment, a detection failure will be resulted, which will cause the reestablishment of the S1 interface and disrupt services in the cell. Therefore, this parameter must be set to DISABLE under such scenarios. Indicates the actual real-time traffic NO transmitted on the IP path. Indicates the actual real-time traffic NO received on the IP path.
NO
No
None
NO
Yes
None
NO
Yes
None
Indicates the actual non-real-time traffic NO transmitted on the IP path. Indicates the actual non-real-time traffic NO received on the IP path. Indicates the actual TX bandwidth reserved for the nonNO real-time service transmitted on the IP path. Indicates the actual RX bandwidth reserved for the nonNO real-time service received on the IP path. Indicates the check result for an IP path. If ping detection and GTP-U static detection are simultaneously NO enabled, the parameter value uses the result of the GTP-U static detection. Indicates the ID of the transmission resource group established on an IP path. Indicates the description about the peer of the IP path.
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
YES
No
None
NO
NO
No
None
Indicates the type of sub-board on the NO board where the IP path is established.
YES
No
None
Indicates whether the IP path joins a transmission resource group. If this parameter is set to DISABLE, the IP NO path is established on the default transmission resource group on a specific physical port. Indicates the ID of an IPv6 path, which YES identifies a unique IPv6 path. Indicates whether the IPv6 path joins a transmission resource group.
NO
No
None
YES
No
LBFD-003006 / TDLBFD-003006 LOFD-003017 / TDLOFD-003017 LBFD-003006 / TDLBFD-003006 LOFD-003017 / TDLOFD-003017 LBFD-003006 / TDLBFD-003006 LOFD-003017 / TDLOFD-003017 LBFD-003006 / TDLBFD-003006 LOFD-003017 / TDLOFD-003017
NO
NO
No
Indicates the ID of the transmission resource group to NO which an IPv6 path is added. Indicates the index of the IPv6 interface NO used by an IPv6 path.
YES
No
YES
No
Indicates the type of IPv6 path. The value QOS indicates that the current IPv6 path only carries services of a fixed NO QoS. The value ANY indicates that the current IPv6 path can carry services of any QoS. Indicates the Differentiated Services Code Point (DSCP) of NO services allowed to be carried on an IPv6 path. Indicates the local IPv6 address of an IPv6 path. This IPv6 NO address must be a global unicast address.
YES
No
YES
No
YES
No
Indicates the peer IPv6 address of an IPv6 path. This IPv6 NO address must be a global unicast address. Indicates the ID of the adjacent signaling point to which the IPv6 path belongs. This parameter is valid only when the APPTYPE parameter is set to NO X2 and must be set to the ID of the associated X2 interface. Note that the SCTP link referenced by this X2 interface must be an IPv6 SCTP link.
YES
No
YES
No
Indicates the application type of IP path.
NO
YES
No
None
Indicates whether to enable ping detection for an IPv6 path. Ping NO detection can be used to check the connectivity of an IPv6 path. Indicates the actual real-time services NO transmitted on an IPv6 path. Indicates the actual real-time services NO received on an IPv6 path. Indicates the actual non-real-time NO services transmitted on an IPv6 path. Indicates the actual non-real-time NO services received on an IPv6 path. Indicates the TX bandwidth reserved for non-real-time NO services on an IPv6 path. Indicates the RX bandwidth reserved for non-real-time NO services on an IPv6 path. Indicates the ping check result of the IPv6 path.
NO
No
NO
Yes
LBFD-003006 / TDLBFD-003006 LOFD-003017 / TDLOFD-003017 LBFD-003006 / TDLBFD-003006 LOFD-003017 / TDLOFD-003017 LBFD-003006 / TDLBFD-003006 LOFD-003017 / TDLOFD-003017 LBFD-003006 / TDLBFD-003006 LOFD-003017 / TDLOFD-003017 LBFD-003006 / TDLBFD-003006 LOFD-003017 / TDLOFD-003017 LBFD-003006 / TDLBFD-003006 LOFD-003017 / TDLOFD-003017 LBFD-003006 / TDLBFD-003006 LOFD-003017 / TDLOFD-003017 LBFD-003006 / TDLBFD-003006 LOFD-003017 / TDLOFD-003017
NO
Yes
NO
Yes
NO
Yes
NO
Yes
NO
Yes
NO
NO
Yes
Indicates the description about NO the peer of the IPv6 path.
NO
No
Indicates the source IP address of an IP path route. The source IP address YES must be the same as the configured device IP address.
YES
No
None
Indicates the destination IP address of an IP path route.
YES
YES
No
None
Indicates the type of transport resource carried on an IP path route. The value HQ indicates NO high-quality transport resources, and the value LQ indicates low-quality transport resources. Indicates the next hop IP address of an IP path route. The next hop IP address and the configured device NO IP address must be on the same network segment, but cannot be the same.
YES
No
None
YES
No
None
Indicates the ID of an IP PM session of YES an NE.
YES
No
LOFD-00301201 / TDLOFD-00301201
Indicates the local IP address of an IP PM session. This IP address excluding 0.0.0.0 must be NO configured at the Ethernet port, Ethernet trunk, or loopback interface.
YES
No
LOFD-00301201 / TDLOFD-00301201
Indicates the peer IP address of the IP PM session. This IP address must be a valid IP address of Class A, B, or C NO and different from any existing IP address of the local end. In addition, it cannot be set to 0.x.x.x or 127.x.x.x.
YES
No
LOFD-00301201 / TDLOFD-00301201
Indicates the Differentiated Services Code NO Point (DSCP) of an IP PM session.
YES
No
LOFD-00301201 / TDLOFD-00301201
Indicates that the activation direction of the IP PM session. For this parameter to be valid, the peer must also support the IP PM session. If this parameter is set to NO UP, the IP PM session initiated by the BS is activated. If this parameter is set to BIDIR, the IP PM sessions initiated by BS and the peer are activated. Indicates the roundtrip delay calculated by an IP PM session detection. The round-trip delay is the time that is NO consumed to transmit IP PM detection packets to and fro between the local and peer ends.
NO
No
LOFD-00301201 / TDLOFD-00301201
NO
Yes
LOFD-00301201 / TDLOFD-00301201
Indicates the DL jitter calculated by an IP PM session detection.
NO
NO
Yes
LOFD-00301201 / TDLOFD-00301201
Indicates the UL jitter calculated by an IP PM session detection.
NO
NO
Yes
LOFD-00301201 / TDLOFD-00301201
Indicates the DL byte loss rate calculated by an IP NO PM session detection.
NO
Yes
LOFD-00301201 / TDLOFD-00301201
Indicates the UL byte loss rate calculated by an IP NO PM session detection.
NO
Yes
LOFD-00301201 / TDLOFD-00301201
Indicates the UL activation status of an IP PM session.
NO
NO
Yes
LOFD-00301201 / TDLOFD-00301201
Indicates the DL activation status of an IP PM session.
NO
NO
Yes
LOFD-00301201 / TDLOFD-00301201
Indicates the type of IP PM session. A triplet consists of the local IP address, peer IP address, and NO protocol type; a quadbit consists of the local IP address, peer IP address, protocol type, and DSCP.
NO
No
LOFD-00301201 / TDLOFD-00301201
Indicates whether to bind the IP PM session to an IP path. If the IP PM session is bound to an IP path, the IP PM session uses the local and peer IP addresses of the IP path in data transmission. In addition, if TXBWASW or RXBWASW is set NO to ON and TCSW is set to ENABLE in the algorithm for the transmission resource group associated with the IP path, the system dynamically adjusts the TX or RX bandwidth of the transmission resource group based on the IP PM detection result.
NO
No
LOFD-00301201 / TDLOFD-00301201
Indicates the ID of the IP path to which NO an IP PM session is bound. Indicates whether the DSCP value of NO a DL IP PM session changes. Indicates the initial DSCP value of a DL NO IP PM session. Indicates the modified DSCP NO value of a DL IP PM session. Indicates the time when the DSCP NO value of a DL IP PM session changes. Indicates whether the DSCP value of an UL IP PM session changes. NO
YES
No
LOFD-00301201 / TDLOFD-00301201
NO
Yes
NO
Yes
NO
Yes
NO
Yes
None
NO
Yes
None
Indicates the initial DSCP value of an UL IP PM session. Indicates the modified DSCP value of an UL IP PM session. Indicates the time when the DSCP value of an UL IP PM session changes. Indicates the version of the negotiated data, when the status of IP PM is UP.
NO
NO
Yes
None
NO
NO
Yes
None
NO
NO
Yes
None
NO
NO
Yes
None
Indicates the cabinet number of YES the board where the IP route is located. Indicates the subrack number of YES the board where the IP route is located. Indicates the slot number of the board YES where the IP route is located.
NO
No
None
NO
No
None
YES
No
None
Indicates the type of sub-board on the YES board where the IP route is established.
YES
No
None
Indicates the type of YES port.
NO
No
None
Indicates the port number.
YES
NO
No
None
Indicates the type of route. If this parameter is set to NEXTHOP, all the IP packets that meet the route direction are first forwarded to the specified next hop YES IP address. If this parameter is set to IF, all the IP packets that meet the route direction are first forwarded to the specified egress port.
YES
No
None
Indicates the destination IP address of the route.
YES
YES
No
None
Indicates the subnet mask for the destination IP YES address of the route.
YES
No
None
Indicates the IP address of the next YES hop.
NO
No
None
Indicates the priority of the routing table entry. A smaller NO parameter value indicates a higher priority.
NO
No
None
Indicates the type of the IP route. A static host route is a manually configured route with the subnet mask set to 255.255.255.255. A static gateway route is a manually configured route, in which the subnet mask is not set to 255.255.255.255 and the next hop IP address is on a different network segment from the NO egress port IP address. A dynamic host route is a dynamically generated route with the subnet mask set to 255.255.255.255. A dynamic gateway route is a dynamically generated route, in which the subnet mask is not set to 255.255.255.255 and the next hop IP address is on a Indicates the description about NO the destination of the route.
NO
Yes
None
NO
No
None
Indicates the type of NO the port.
NO
Yes
None
NO
NO
Yes
None
Indicates the destination IPv6 YES address of the static IPv6 route.
YES
No
LBFD-003006 / TDLBFD-003006
Indicates the prefix length of the destination IPv6 YES address of the static IPv6 route. Indicates the next hop type of static IPv6 route. If this parameter is set to NEXTHOP, all the IP packets meeting the route direction are first forwarded to the next hop IPv6 address, and then forwarded to other addresses.
YES
No
LBFD-003006 / TDLBFD-003006
YES
NO
No
LBFD-003006 / TDLBFD-003006
Indicates the type of next hop IPv6 YES address.
YES
No
LBFD-003006 / TDLBFD-003006
Indicates the next hop IPv6 address of YES the static IPv6 route. Indicates the index of the IPv6 interface YES to which a static IPv6 route belongs. Indicates the priority of a static IPv6 route. A smaller NO parameter value indicates a higher priority.
YES
No
LBFD-003006 / TDLBFD-003006
NO
No
LBFD-003006 / TDLBFD-003006
NO
No
LBFD-003006 / TDLBFD-003006
Indicates the type of the static IPv6 route. A static host route is a manually configured route with a 128-bit prefix. A static gateway route is a manually configured route with a non-128-bit prefix, with the next hop IP address on a different network segment from the egress port IP address. A dynamic NO host route is a dynamically learned (not manually configured) route with a 128-bit prefix. A dynamic gateway route is a dynamically learned (not manually configured) route with a non-128-bit prefix, with the next hop IP address on a different segment from the egress port IP address. Indicates the description about NO the destination of a static IPv6 route. Indicates the cabinet number of the port to which the YES IPSec policy group is bound. Indicates the subrack number of the port to which the YES IPSec policy group is bound. Indicates the slot number of the port to which the IPSec policy group is bound.
NO
Yes
LBFD-003006 / TDLBFD-003006
NO
No
LBFD-003006 / TDLBFD-003006
NO
No
LOFD-003009 / TDLOFD-003009
NO
No
LOFD-003009 / TDLOFD-003009
YES
YES
No
LOFD-003009 / TDLOFD-003009
Indicates the type of sub-board on the board with the port YES to which the IPSec policy group is bound.
YES
No
LOFD-003009 / TDLOFD-003009
Indicates the type of port to which the YES IPSec policy group is bound.
YES
No
LOFD-003009 / TDLOFD-003009
Indicates the number of the port to which the IPSec policy group is bound.
YES
YES
No
LOFD-003009 / TDLOFD-003009
Indicates the name of the IPSec policy NO group. Indicates the number of the port to which the IPv6 security policy group is bound.
YES
No
LOFD-003009 / TDLOFD-003009 LBFD-003006 / TDLBFD-003006 LOFD-003024 / TDLOFD-003024
YES
YES
No
Indicates the name of the IPv6 security NO policy group. Indicates the ID of the IPSec tunnel pair. It uniquely identifies a pair of primary and secondary IPSec tunnels.
YES
No
YES
YES
No
LOFD-003009 / TDLOFD-003009
Indicates the name of the primary IPSec policy group. The primary IPSec NO tunnel uses an IPSec policy in the primary IPSec policy group. Indicates the ID of the primary IPSec policy. The primary IPSec tunnel uses the primary IPSec NO policy, which is identified by this parameter and the MSPGN parameter together. Indicates the name of the secondary IPSec policy group. The secondary NO IPSec tunnel uses an IPSec policy in the secondary IPSec policy group. Indicates the ID of the secondary IPSec policy. The secondary IPSec tunnel uses the secondary IPSec policy, which is identified by this parameter and the SSPGN parameter together. Indicates the ID of the BFD session referenced by the primary IPSec tunnel.
YES
No
LOFD-003009 / TDLOFD-003009
YES
No
LOFD-003009 / TDLOFD-003009
YES
No
LOFD-003009 / TDLOFD-003009
NO
YES
No
LOFD-003009 / TDLOFD-003009
NO
YES
No
LOFD-003009 / TDLOFD-003009
Indicates the ID of the BFD session referenced by the secondary IPSec tunnel.
NO
YES
No
LOFD-003009 / TDLOFD-003009
Indicates the IPSec policy in use. If the primary IPSec tunnel is used, the IPSec policy in use is the primary IPSec NO policy. If the secondary IPSec policy is used, the IPSec policy in use is the secondary IPSec policy.
NO
Yes
LOFD-003009 / TDLOFD-003009
Indicates the name of the IPSec policy YES group.
YES
No
LOFD-003009 / TDLOFD-003009
Indicates the sequence No. of the IPSec policy group. YES The smaller the number, the higher the priority.
YES
No
LOFD-003009 / TDLOFD-003009
Indicates the ID of the access control list.
NO
YES
No
LOFD-003009 / TDLOFD-003009
Indicates the name of the IPSec NO proposal.
YES
No
LOFD-003009 / TDLOFD-003009
Indicates the name of the IKE peer that NO is referenced by the IPSec policy.
YES
No
LOFD-003009 / TDLOFD-003009
Indicates the perfect forward secrecy (PFS) value. In the second phase of IPSec negotiation, PFS enables the BS to use a key that is not derived from the first-phase key, ensuring that the two keys are independent of each other. According to PFS, a key protects a unique set of data. The elements used NO to generate keys are not reusable. If a key is decrypted, other keys are still secure. If the IPSec policy is used to initiate IPSec negotiation, a PFS exchange is launched. If the PFS is assigned to the local end, then the PFS exchange is required when the negotiation is launched at the peer end. The DH
NO
No
LOFD-003009 / TDLOFD-003009
Indicates the configuration mode of the IPSec SA life cycle. The value GLOBAL indicates that the life cycle applies to all IPSec SAs of the BS, and the value LOCAL indicates the life cycle applies only to the current IPSec NO SA. If this parameter is set to GLOBAL, the value of Lifetime Based On Time is permanently set to 3600, the value of Lifetime Based On Traffic is permanently set to 69120000.
NO
No
LOFD-003009 / TDLOFD-003009
Indicates the life cycle of an IPSec SA. An IPSec SA becomes invalid once its life cycle specified by this parameter elapses. Before the life cycle of an IPSec SA elapses, the IPSec policy is used in an attempt to establish a new IPSec SA through negotiation to ensure secure transmission; before the negotiation is NO complete, the original IPSec SA is still used. After the negotiation is complete, the new SA is immediately. IPSec SA negotiation takes a period. To prevent SA updating from affecting communication security, a life cycle longer than 900 seconds is recommended. Indicates the effective traffic under the IPSec policy. Indicates the cabinet number of the board that adopts the IPSec policy. Indicates the subrack number of the board that adopts the IPSec policy.
NO
No
LOFD-003009 / TDLOFD-003009
NO
NO
No
LOFD-003009 / TDLOFD-003009
NO
NO
Yes
LOFD-003009 / TDLOFD-003009
NO
NO
Yes
LOFD-003009 / TDLOFD-003009
Indicates the slot number of the board NO that adopts the IPSec policy.
NO
Yes
LOFD-003009 / TDLOFD-003009
Indicates the size of the IPSec packet anti-replay window. If the value of this parameter is set to 0, the IPSec packet anti-replay function is disabled. If the value of this parameter is set to 32, 64, 128, 256, 512, 1024, 2048 or 4096, the system checks whether the packets are NO duplicate in the window. A packet is discarded if it has a duplicate packet or its sequence number is smaller than any packet in the window. The window slides if the sequence number of the packet is larger than any packet that is received in the window.
NO
No
LOFD-003009 / TDLOFD-003009
Indicates the name of the IPv6 IPSec YES policy group.
YES
No
Indicates the sequence number of the IPv6 IPSec policy. A larger YES value of this parameter indicates a lower priority.
YES
No
Indicates the type of the ID of the access NO control list.
YES
No
Indicates the ID of the IPv4 ACL.
NO
YES
No
Indicates the ID of the IPv6 ACL.
NO
YES
No
Indicates the name of the security NO proposal.
YES
No
Indicates the name of the IPv6 IKE peer that is referenced NO by the IPv6 IPSec policy.
YES
No
Indicates the perfect forward secrecy (PFS) value. In the second phase of IPSec negotiation, PFS enables the BS to use a key that is not derived from the first-phase key, ensuring that the two keys are independent of each other. According to PFS, a key protects a unique set of data. The elements used NO to generate keys are not reusable. If a key is compromised, other keys are still secure. If the IPSec policy is used to initiate IPSec negotiation, a PFS exchange is launched. If the PFS is assigned to the local end, then the PFS exchange is required when the negotiation is launched at the Indicates the configuration mode of the IPv6 IPSec SA life cycle. The value GLOBAL indicates that the life cycle applies to all IPSec SAs of the BS, and the value LOCAL indicates NO the life cycle applies only to the current IPSec SA. When this parameter is set to GLOBAL, Lifetime Based On Time is 3600s and Lifetime Based On Traffic is 69120000 KB.
NO
No
NO
No
Indicates the life cycle of an IPv6 IPSec SA. When the lifetime reaches a specified value, the IPv6 IPSec SA becomes invalid. Before the life cycle of an IPv6 IPSec SA elapses, the IPSec policy is used in an attempt to establish a new IPv6 IPSec SA through negotiation to ensure secure transmission; before NO the negotiation is complete, the original IPv6 IPSec SA is still used. After the negotiation is completed, the new SA is immediately used. IPv6 IPSec SA negotiation takes a period. To prevent SA updating from affecting communication security, a life cycle longer than 900 seconds is
NO
No
Indicates the effective traffic of the IPv6 IPSec policy.
NO
NO
No
Indicates the cabinet number of the board that adopts the IPv6 IPsec policy. Indicates the subrack number of the board that adopts the IPv6 IPSec policy.
NO
NO
Yes
NO
NO
Yes
Indicates the slot number of the board NO that adopts the IPv6 IPSec policy.
NO
Yes
Indicates the name of the IPSec YES proposal.
YES
No
LOFD-003009 / TDLOFD-003009
Indicates the encapsulation mode of an IPSec proposal, which can be set to TUNNEL or TRANSPORT. In TRANSPORT mode, only data is encrypted. In TUNNEL mode, the whole IP packet is protected, and a new IP header is added to the original IP packet. The source IP address and the NO destination IP address of the new IP header are the IP addresses of two ends of the security tunnel. Both the TRANSPORT mode and the TUNNEL mode are used for end-to-end IPSec protection. The TUNNEL mode, however, is also applied to the protection of a certain segment.
NO
No
LOFD-003009 / TDLOFD-003009
Indicates the security protocol used in an IPSec proposal. The value AH indicates the Authentication Header (AH) protocol specified in RFC2402. The value ESP indicates the Encapsulating NO Security Payload (ESP) protocol specified in RFC2406. The value AH_ESP indicates that the ESP protocol is preferentially used to protect packets, but not the AH protocol. Indicates the authentication algorithm used in the AH. The Message-Digest Algorithm 5 (MD5) algorithm uses a 128-bit secret key, whereas the Secure NO Hash Algorithm 1 (SHA1) uses a 160bit secret key. The MD5 algorithm features faster calculation but lower security than the SHA1 algorithm.
NO
No
LOFD-003009 / TDLOFD-003009
NO
No
LOFD-003009 / TDLOFD-003009
Indicates the authentication algorithm used in the ESP.
NO
NO
No
LOFD-003009 / TDLOFD-003009
Indicates the encryption algorithm NO used in the ESP.
NO
No
LOFD-003009 / TDLOFD-003009
Indicates the cabinet number of the board that adopts the IPSec proposal. Indicates the subrack number of the board that adopts the IPSec proposal.
NO
NO
Yes
LOFD-003009 / TDLOFD-003009
NO
NO
Yes
LOFD-003009 / TDLOFD-003009
Indicates the slot number of the board NO that adopts the IPSec proposal. Indicates whether to enable the local NO maintenance Ethernet port. Indicates the physical layer status of the local NO maintenance Ethernet port.
NO
Yes
LOFD-003009 / TDLOFD-003009
NO
Yes
None
NO
Yes
None
Indicates the number of discarded packets that are received at the local maintenance Ethernet port. Indicates the number of packets received at the local maintenance Ethernet port. Indicates the number of discarded packets that are transmitted at the local maintenance Ethernet port. Indicates the number of packets transmitted at the local maintenance Ethernet port.
NO
NO
Yes
None
NO
NO
Yes
None
NO
NO
Yes
None
NO
NO
Yes
None
Indicates the IP address for local maintenance. The value of this parameter must meet the following conditions: (1) It must be a valid IP address of Class A, B, or C, and cannot be set to 0.x.x.x or 127.x.x.x. (2) It must be different from the local IP address of any remote NO maintenance channel and from any device IP address. (3) It must be on different network segments from the IP address of any remote maintenance channel and from any device IP address. (4) It must be different from any IP address configured on other ports.
NO
No
None
Indicates the subnet mask of a local maintenance channel. This subnet mask must NO be a valid mask address and cannot be 0.0.0.0 or 255.255.255.255.
NO
No
None
Indicates the IPv6 address of the local maintenance channel. This IPv6 NO address must be a global unicast address or a linklocal address. Indicates the prefix length of the IPv6 address of a local NO maintenance channel.
NO
No
LBFD-003006 / TDLBFD-003006
NO
No
LBFD-003006 / TDLBFD-003006
Indicates the status of the IPv6 address of the local NO maintenance channel.
NO
Yes
LBFD-003006 / TDLBFD-003006
Indicates the time period during which the IPv6 address of the local NO maintenance channel is in valid state.
NO
Yes
LBFD-003006 / TDLBFD-003006
Indicates the time period during which the IPv6 address of the local maintenance channel is in preferred state. The valid state is categorized into the preferred state and the deprecated state. In preferred state, the address NO can be freely used. In deprecated state, the connections previously established through this address are still usable, whereas any connection newly established through this address is not usable. Indicates the cabinet number of YES the board where the port is located. Indicates the subrack number of YES the board where the port is located. Indicates the slot number of the board YES where the port is located.
NO
Yes
LBFD-003006 / TDLBFD-003006
NO
No
NO
No
YES
No
Indicates the port type.
YES
YES
No
YES
YES
No
Indicates the switch for limiting the line NO rate at the port.
NO
No
Indicates the UL committed information rate after rate limitation is configured at a port.
NO
YES
No
Indicates the Committed Burst Size (CBS) after NO rate limitation is configured at a port.
YES
No
Indicates the Excess Burst Size (EBS) after rate NO limitation is configured at a port.
YES
No
Indicates the type of sub-board on the YES board where a port is located.
YES
No
Indicates the DL committed information rate after rate limitation is configured at a NO port. This parameter computes the value of Physical Port Down Link Admission.
YES
No
Indicates the number of the cabinet where the MLPPP group is located. Indicates the number of the subrack where the MLPPP group is located. Indicates the number of the slot where the MLPPP group is located.
YES
NO
No
LBFD-00300403 / TDLBFD-00300403
YES
NO
No
LBFD-00300403 / TDLBFD-00300403
YES
YES
No
LBFD-00300403 / TDLBFD-00300403
Indicates the number of the MLPPP group.
YES
YES
No
LBFD-00300403 / TDLBFD-00300403
Indicates whether an MLPPP group supports the multiclass feature. If this parameter is set to ENABLE, the MLPPP group NO supports the Class of Service (CoS) feature and four or eight service types of different priorities. Indicates the authentication type of the MLPPP group.
NO
No
LBFD-00300403 / TDLBFD-00300403
NO
NO
No
LBFD-00300403 / TDLBFD-00300403
Indicates the authentication user NO name of an MLPPP group.
YES
No
LBFD-00300403 / TDLBFD-00300403
Indicates the authentication password.
NO
YES
No
LBFD-00300403 / TDLBFD-00300403
Indicates the local IP address. If this parameter is set to 0.0.0.0, this IP address needs to be negotiated. If this parameter is not set NO to 0.0.0.0, it must be set to a valid IP address of class A, B, or C but must not be the reserved address 0.x.x.x or 127.x.x.x.
NO
No
LBFD-00300403 / TDLBFD-00300403
Indicates the subnet mask of the local IP address. If this NO parameter is set to 0.0.0.0, it needs to be negotiated.
NO
No
LBFD-00300403 / TDLBFD-00300403
Indicates the peer IP address. When the eNodeB is connected to a peer equipment, the peer IP address can be either user-specified NO or set to 0.0.0.0. If this parameter is set to 0.0.0.0, this IP address is obtained by means of negotiation. Indicates the MP/MC head option NO of the MLPPP.
NO
No
LBFD-00300403 / TDLBFD-00300403
NO
No
LBFD-00300403 / TDLBFD-00300403
Indicates whether to enable PPP multi- NO frame multiplexing.
NO
No
LBFD-00300403 / TDLBFD-00300403
Indicates the fragment size of an NO MLPPP group.
NO
No
LBFD-00300403 / TDLBFD-00300403
Indicates the maximum length of NO the PPP MUX subframe.
NO
No
LBFD-00300403 / TDLBFD-00300403
Indicates the maximum length of NO the PPP MUX frame.
NO
No
LBFD-00300403 / TDLBFD-00300403
Indicates the timeout duration of a PPP MUX combination. If the PPP MUX combination takes NO longer time than this parameter value, an alarm related to the PPP MUX combination timeout is reported.
NO
No
LBFD-00300403 / TDLBFD-00300403
Indicates the number of classes of service.
NO
NO
No
LBFD-00300403 / TDLBFD-00300403
Indicates whether to enable IP header NO compression.
NO
No
LBFD-00300403 / TDLBFD-00300403
Indicates the threshold above which the MLPPP NO packet loss alarm is generated. Indicates the threshold below which the MLPPP NO packet loss alarm is cleared.
NO
No
LBFD-00300403 / TDLBFD-00300403
NO
No
LBFD-00300403 / TDLBFD-00300403
Indicates the status NO of an MLPPP group.
NO
Yes
LBFD-00300403 / TDLBFD-00300403
Indicates the status of the IPCP NO protocol.
NO
Yes
LBFD-00300403 / TDLBFD-00300403
Indicates the status NO of the PPP MUX.
NO
Yes
LBFD-00300403 / TDLBFD-00300403
Indicates the negotiation result of NO the local IP address. Indicates the negotiation result of NO the local IP mask. Indicates the negotiation result of NO the peer IP address.
NO
Yes
NO
Yes
NO
Yes
Indicates the negotiation result of NO the multi-class PPP. Indicates the negotiation result of NO the maximum RX unit. Indicates the negotiation result of NO the PPP MUX. Indicates the negotiation result of NO the address field and control field. Indicates the negotiation result of the protocol field compression. Indicates the negotiation result of the IPHC. Indicates the number of packets received. Indicates the number of packets sent. Indicates the RX traffic. Indicates the TX traffic. Indicates the number of IP addresses of an MLPPP group. Indicates the list of IP addresses of an MLPPP group. NO
NO
Yes
LBFD-00300403 / TDLBFD-00300403
NO
Yes
NO
Yes
NO
Yes
NO
Yes
LBFD-00300403 / TDLBFD-00300403 LBFD-00300403 / TDLBFD-00300403 LBFD-00300403 / TDLBFD-00300403 LBFD-00300403 / TDLBFD-00300403 LBFD-00300403 / TDLBFD-00300403 LBFD-00300403 / TDLBFD-00300403 LBFD-00300403 / TDLBFD-00300403 LBFD-00300403 / TDLBFD-00300403
NO
NO
Yes
NO
NO
Yes
NO NO NO
NO NO NO
Yes Yes Yes
NO
NO
Yes
NO
NO
Yes
Indicates the type of sub-board on the board where an YES MLPPP group is established.
YES
No
LBFD-00300403 / TDLBFD-00300403
Indicates the number of bytes received. Indicates the number of discarded packets received. Indicates the number of bytes transmitted. Indicates the number of discarded packets transmitted. Indicates the number of the cabinet where the MLPPP sublink is located. Indicates the number of the subrack where the MLPPP sublink is located. Indicates the number of the slot where the MLPPP sublink is located. Indicates the number of the MLPPP sublink.
NO
NO
Yes
NO
NO
Yes
NO
NO
Yes
NO
NO
Yes
YES
NO
No
LBFD-00300403 / TDLBFD-00300403
YES
NO
No
LBFD-00300403 / TDLBFD-00300403
YES
YES
No
LBFD-00300403 / TDLBFD-00300403
YES
NO
No
LBFD-00300403 / TDLBFD-00300403
Indicates the number of the MLPPP group.
NO
NO
No
LBFD-00300403 / TDLBFD-00300403
Indicates the number of the subrack housing the board where the NO E1/T1 port carrying the MLPPP sublink is located. Indicates the number of slot holding the board where the E1/T1 port carrying the MLPPP sublink is located.
NO
No
LBFD-00300403 / TDLBFD-00300403
NO
YES
No
LBFD-00300403 / TDLBFD-00300403
Indicates the number of the NO E1/T1 port carrying the MLPPP sublink.
NO
No
LBFD-00300403 / TDLBFD-00300403
Indicates the number of the E1/T1 slot carrying the MLPPP sublink. Timeslot 0 cannot be configured. In E1 mode, timeslot 1 to NO 31 can be configured. In T1 mode, only timeslots 1 to 24 can be configured. Other timeslots are not used.
YES
No
LBFD-00300403 / TDLBFD-00300403
Indicates the Maximum Receive Unit (MRU). The received packet whose length is greater than this parameter value is discarded.
NO
NO
No
LBFD-00300403 / TDLBFD-00300403
Indicates whether to enable protocol field NO compression.
NO
No
LBFD-00300403 / TDLBFD-00300403
Indicates whether to enable the compression of the NO address field and control field.
NO
No
LBFD-00300403 / TDLBFD-00300403
Indicates the timeout duration of NO the MLPPP sublink negotiation.
NO
No
LBFD-00300403 / TDLBFD-00300403
Indicates the type of sub-board where an YES MLPPP sublink is established.
YES
No
LBFD-00300403 / TDLBFD-00300403
Indicates the type of sub-board where an NO MLPPP group is established.
YES
No
LBFD-00300403 / TDLBFD-00300403
Indicates the status of the MLPPP NO sublink.
NO
Yes
LBFD-00300403 / TDLBFD-00300403
Indicates the status of the Link Control NO Protocol (LCP) protocol.
NO
Yes
LBFD-00300403 / TDLBFD-00300403
Indicates the negotiation result of NO the maximum RX unit. Indicates the negotiation result of NO the protocol field compression. Indicates the negotiation result of the Address-AndNO Control-FieldCompression (ACFC).
NO
Yes
LBFD-00300403 / TDLBFD-00300403
NO
Yes
LBFD-00300403 / TDLBFD-00300403
NO
Yes
LBFD-00300403 / TDLBFD-00300403
Indicates the type of sub-board on the board where the NO E1/T1 port carrying the MLPPP sublink is located.
YES
No
LBFD-00300403 / TDLBFD-00300403
Indicates the number of packets received. Indicates the number of bytes received. Indicates the number of discarded packets received. Indicates the number of packets transmitted. Indicates the number of bytes transmitted. Indicates the number of discarded packets transmitted.
NO
NO
Yes
LBFD-00300403 / TDLBFD-00300403 LBFD-00300403 / TDLBFD-00300403 LBFD-00300403 / TDLBFD-00300403 LBFD-00300403 / TDLBFD-00300403 LBFD-00300403 / TDLBFD-00300403 LBFD-00300403 / TDLBFD-00300403
NO
NO
Yes
NO
NO
Yes
NO
NO
Yes
NO
NO
Yes
NO
NO
Yes
Indicates the master/slave flag of the remote YES maintenance channel.
YES
No
LBFD-004002 / TDLBFD-004002
Indicates the local IP address of a remote maintenance channel.
NO
YES
No
LBFD-004002 / TDLBFD-004002
Indicates the local subnet mask of a remote maintenance channel.
NO
YES
No
LBFD-004002 / TDLBFD-004002
Indicates the peer IP address of the remote maintenance NO channel, that is, the IP address of the M2000.
YES
No
LBFD-004002 / TDLBFD-004002
Indicates the subnet mask of the peer IP address for the NO remote maintenance channel.
YES
No
LBFD-004002 / TDLBFD-004002
Indicates the cabinet number of the board where the NO remote maintenance channel is located.
NO
No
LBFD-004002 / TDLBFD-004002
Indicates the subrack number of the board where the NO remote maintenance channel is located. Indicates the slot number of the board where the remote NO maintenance channel is located. Indicates the bearer type of a remote NO maintenance channel. Indicates whether to add a route for the remote maintenance channel. If this parameter is set to YES, a route is automatically added for the remote maintenance channel according to the configurations. If this parameter is set to NO, operators must run the ADD IPRT command to NO manually add a route for the remote maintenance channel when the following conditions are met: The peer IP address and the device IP address are not on the same network segment and the network segment containing the device IP address does not cover that containing the peer IP address.
NO
No
LBFD-004002 / TDLBFD-004002
YES
No
LBFD-004002 / TDLBFD-004002
NO
No
LBFD-004002 / TDLBFD-004002
NO
No
LBFD-004002 / TDLBFD-004002
Indicates the destination IP address used in the routing table for a remote maintenance channel. This IP NO address is a Network ID, which is usually the address of the network where the M2000 is located.
YES
No
LBFD-004002 / TDLBFD-004002
Indicates the subnet mask of the destination IP address used in the routing table for a remote NO maintenance channel, that is, the destination network segment where the EMS is located.
YES
No
LBFD-004002 / TDLBFD-004002
Indicates the type of route in the routing table for a remote maintenance channel. If this parameter is NO set to NEXTHOP, the next hop IP address must be specified in the routing table.
NO
No
LBFD-004002 / TDLBFD-004002
Indicates the type of egress port used in the route for a NO remote maintenance channel.
YES
No
LBFD-004002 / TDLBFD-004002
Indicates the number of the egress port used in the route for a NO remote maintenance channel.
YES
No
LBFD-004002 / TDLBFD-004002
Indicates the priority of the route for the remote maintenance channel. The NO priority of the route has a negative correlation with the value of this parameter. Indicates the next hop IP address of the route added for NO a remote maintenance channel. Indicates the status of a remote NO maintenance channel. Indicates whether the remote maintenance channel is being used.
NO
No
LBFD-004002 / TDLBFD-004002
YES
No
LBFD-004002 / TDLBFD-004002
NO
Yes
LBFD-004002 / TDLBFD-004002
NO
NO
Yes
LBFD-004002 / TDLBFD-004002
Indicates the type of sub-board on the board where a remote NO maintenance channel is established.
YES
No
LBFD-004002 / TDLBFD-004002
Indicates the local IPv6 address of a remote maintenance channel. This address must be a global unicast address. Indicates the peer IPv6 address of a remote maintenance channel. This address must be a global unicast address.
YES
YES
No
NO
YES
No
Indicates the status of an IPv6 remote NO maintenance channel.
NO
Yes
Indicates the cabinet number of the board where the YES packet filtering is used.
NO
No
LOFD-003014 / TDLOFD-003014
Indicates the subrack number of the board where the YES packet filtering is used.
NO
No
LOFD-003014 / TDLOFD-003014
Indicates the slot number of the board YES where the packet filtering is used.
YES
No
LOFD-003014 / TDLOFD-003014
Indicates the type of YES the port.
YES
No
LOFD-003014 / TDLOFD-003014
YES
YES
No
LOFD-003014 / TDLOFD-003014
Indicates the ID of an advanced ACL. The value of this NO parameter ranges from 3000 to 3999. Indicates whether to permit or reject access of the data that does not match the ACL rule. If this parameter is set to PERMIT, data that does not match the NO ACL rule is allowed to pass. If this parameter is set to DENY, data that does not match the ACL rule is discarded.
YES
No
LOFD-003014 / TDLOFD-003014
NO
No
LOFD-003014 / TDLOFD-003014
Indicates the type of sub-board on the YES board where packet filter is enabled.
YES
No
LOFD-003014 / TDLOFD-003014
Indicates the number of transmitted packets. NO This parameter is reserved for further extension. Indicates the number of received NO packets.
NO
Yes
LOFD-003014 / TDLOFD-003014
NO
Yes
LOFD-003014 / TDLOFD-003014
Indicates the number of permitted packets on the TX channel. This NO parameter is reserved for further extension. Indicates the number of permitted NO packets on the RX channel. Indicates the number of rejected packets on the TX channel. This NO parameter is reserved for further extension. Indicates the number of rejected packets on the RX channel.
NO
Yes
LOFD-003014 / TDLOFD-003014
NO
Yes
LOFD-003014 / TDLOFD-003014
NO
Yes
LOFD-003014 / TDLOFD-003014
NO
NO
Yes
LOFD-003014 / TDLOFD-003014
Indicates the number of bytes contained in transmitted packets. NO This parameter is reserved for further extension. Indicates the number of bytes contained in received packets.
NO
Yes
LOFD-003014 / TDLOFD-003014
NO
NO
Yes
LOFD-003014 / TDLOFD-003014
Indicates the number of bytes contained in permitted packets NO on the TX channel. This parameter is reserved for further extension. Indicates the number of bytes contained in NO permitted packets on the RX channel.
NO
Yes
LOFD-003014 / TDLOFD-003014
NO
Yes
LOFD-003014 / TDLOFD-003014
Indicates the number of bytes contained in rejected packets on NO the TX channel. This parameter is reserved for further extension. Indicates the number of bytes contained in NO rejected packets on the RX channel. Indicates the number of bytes contained in the packets that do not match the ACL rules for packet filtering. If MB is set to PERMIT, this parameter measures the number of bytes contained in the NO accessed packets. If MB is set to DENY, this parameter measures the number of bytes contained in the discarded packets. This parameter is valid only when CATALOG is set to PORT.
NO
Yes
LOFD-003014 / TDLOFD-003014
NO
Yes
LOFD-003014 / TDLOFD-003014
NO
Yes
LOFD-003014 / TDLOFD-003014
Indicates the number of the packets that do not match the ACL rules for packet filtering. If MB is set to PERMIT, this parameter measures the number of accessed NO packets. If MB is set to DENY, this parameter measures the number of discarded packets. This parameter is valid only when CATALOG is set to PORT. Indicates the ID of an ACL at layer 2. The value of this parameter ranges NO from 4000 to 4999. The BS filters packets based on only VLAN IDs. Indicates the packet filtering mode. The BS can filter packets based on NO the advanced ACL, layer-2 ACL, or both at the same time. Indicates the destination IP address in a ping filter entry. This address must be a valid IP address of class A, B, or C. It can also be a network segment address.
NO
Yes
LOFD-003014 / TDLOFD-003014
YES
No
LOFD-003014 / TDLOFD-003014
NO
No
LOFD-003014 / TDLOFD-003014
YES
YES
No
LOFD-003014 / TDLOFD-003014
Indicates the subnet mask corresponding to the IP address in YES a ping filter entry. The subnet mask cannot be 0.0.0.0.
YES
No
LOFD-003014 / TDLOFD-003014
Indicates the PMTU detection mode: active or passive. When this parameter is set to ACTIVE, PMTU detection is periodically performed. When NO this parameter is set to PASSIVE, the PMTU is adjusted according to the ultra-large Internet Control Message Protocol (ICMP) messages received. Indicates the destination port number of the UDP packets for PMTU detection. Ports 65020, 65010, 65099, and 65100 NO are used for IP PM, FPMUX, and AACP, and therefore these ports should not be used for PMTU detection. Indicates the timeout duration of a single PMTU detection.
NO
No
LBFD-003006 / TDLBFD-003006
NO
No
LBFD-003006 / TDLBFD-003006
NO
NO
No
LBFD-003006 / TDLBFD-003006
Indicates the aging period of the PMTU NO table.
NO
No
LBFD-003006 / TDLBFD-003006
Indicates the default DSCP. If no DSCP is specified for a link, the default NO DSCP is used when a PMTU detection is performed on the link. Indicates the number of the cabinet that houses YES the board where port security is enabled. Indicates the number of the subrack that houses YES the board where port security is enabled. Indicates the number of the slot corresponding to the board where port security is enabled.
NO
No
LBFD-003006 / TDLBFD-003006
NO
No
LOFD-003014 / TDLOFD-003014
NO
No
LOFD-003014 / TDLOFD-003014
YES
YES
No
LOFD-003014 / TDLOFD-003014
Indicates the type of sub-board on the YES board where port security is enabled.
YES
No
LOFD-003014 / TDLOFD-003014
Indicates the type of port on which port YES security is enabled.
NO
No
LOFD-003014 / TDLOFD-003014
Indicates the number of the port on which port security is configured.
YES
YES
No
LOFD-003014 / TDLOFD-003014
Indicates whether to disable services on a specified port to implement port security. If this parameter is set to NO DISABLE, running services on the port is prohibited, thereby guaranteeing the security of the port. Indicates the cabinet number of YES the board where the PPP link is located.
NO
No
LOFD-003014 / TDLOFD-003014
NO
No
Indicates the subrack number of YES the board where the PPP link is located. Indicates the slot number of the board YES where the PPP link is located.
NO
No
YES
No
Indicates the number of the PPP YES link.
YES
No
Indicates the number of the ET/T1 port that carries the PPP link.
NO
YES
No
Indicates the mode in which the local end of a PPP link authenticates the peer end. The authentication mode is classified into NONAUTH, PAP, and CHAP. In PAP mode, user names and passwords are transmitted explicitly on the network. If they are intercepted during transmission, a great threat to network security is NO caused. Thus, the PAP is applied only to the network environment with low security requirements. With three handshakes, the CHAP provides a more secure authentication. In CHAP mode, only user accounts rather than passwords are transmitted, enhancing security compared to the Indicates the authentication user NO name of the PPP link. Indicates the password for authenticating a PPP link.
NO
No
YES
No
NO
YES
No
Indicates the number of the ET/T1 timeslot that carries the PPP link. Timeslot 0 is used for synchronization, and cannot be configured. In E1 NO mode, timeslots 1 to 31 can be configured. In T1 mode, only timeslots 1 to 24 can be configured. Other timeslots are not used.
YES
No
Indicates the local IP address. If this parameter is set to NO 0.0.0.0, this parameter needs to be negotiated.
NO
No
Indicates the subnet mask of the local IP address. If this NO parameter is set to 0.0.0.0, it needs to be negotiated.
NO
No
Indicates the peer IP address. If the BS is connected to an upper-level node, this address is specified according to the NO upper-level node. If the BS is cascaded to a lower-level node, this address must be specified. This parameter can be set to 0.0.0.0.
NO
No
Indicates whether to enable the PPP multiframe multiplexing function. If this parameter is set to NO ENABLE, multiple PPP frames are multiplexed on the PPP link to reduce the bandwidth overhead.
NO
No
Indicates the maximum length of the PPP NO Multiplexing (MUX) subframe.
NO
No
Indicates the maximum length of NO the PPP MUX frame.
NO
No
Indicates the timeout duration of the PPP MUX combination.
NO
NO
No
Indicates whether to enable IP header NO compression.
NO
No
Indicates the Maximum Receive Unit (MRU). If the size of a received NO packet is greater than the MRU value, the packet is discarded. Indicates whether to enable protocol field NO compression.
NO
No
NO
No
Indicates whether to enable the compression of the NO address field and control field.
NO
No
Indicates the timeout duration for NO the PPP link negotiation. Indicates the status NO of the PPP link.
NO
No
NO
Yes
Indicates the status of the Link Control NO Protocol (LCP) protocol.
NO
Yes
Indicates the status of the IP Control NO Protocol (IPCP).
NO
Yes
Indicates the status NO of the PPP MUX.
NO
Yes
Indicates the local IP address negotiated with the peer end. Indicates the mask of the local IP address that is negotiated with the peer end. Indicates the peer IP address negotiated with the peer end.
NO
NO
Yes
LBFD-003004 / TDLBFD-003004 LBFD-00300402 / TDLBFD-00300402 LBFD-003004 / TDLBFD-003004 LBFD-00300402 / TDLBFD-00300402 LBFD-003004 / TDLBFD-003004 LBFD-00300402 / TDLBFD-00300402 LBFD-003004 / TDLBFD-003004 LBFD-00300402 / TDLBFD-00300402 LBFD-003004 / TDLBFD-003004 LBFD-00300402 / TDLBFD-00300402
NO
NO
Yes
NO
NO
Yes
Indicates the negotiation result of NO the IP header compression. Indicates the negotiation result of the compression NO switch of the address field and control field. Indicates the negotiation result of the compression NO switch of the protocol field. Indicates the negotiation result of NO the maximum RX unit.
NO
Yes
NO
Yes
NO
Yes
NO
Yes
Indicates the negotiation result of NO the PPP MUX. Indicates the number of packets received on the PPP link. Indicates the number of packets transmitted on the PPP link. Indicates the RX traffic of the PPP link. Indicates the TX traffic of the PPP link. Indicates the number of IP addresses of the PPP link.
NO
Yes
LBFD-003004 / TDLBFD-003004 LBFD-00300402 / TDLBFD-00300402 LBFD-003004 / TDLBFD-003004 LBFD-00300402 / TDLBFD-00300402 LBFD-003004 / TDLBFD-003004 LBFD-00300402 / TDLBFD-00300402 LBFD-003004 / TDLBFD-003004 LBFD-00300402 / TDLBFD-00300402 LBFD-003004 / TDLBFD-003004 LBFD-00300402 / TDLBFD-00300402 LBFD-003004 / TDLBFD-003004 LBFD-00300402 / TDLBFD-00300402 LBFD-003004 / TDLBFD-003004 LBFD-00300402 / TDLBFD-00300402 LBFD-003004 / TDLBFD-003004 LBFD-00300402 / TDLBFD-00300402 LBFD-003004 / TDLBFD-003004 LBFD-00300402 / TDLBFD-00300402
NO
NO
Yes
NO
NO
Yes
NO
NO
Yes
NO
NO
Yes
NO
NO
Yes
Indicates the list of IP addresses of the NO PPP link. Indicates the PPP frame error rate threshold above NO which the related alarm is generated. Indicates the PPP frame error rate threshold below which the related alarm is cleared.
NO
Yes
NO
No
NO
NO
No
Indicates the type of sub-board on the YES board where a PPP link is located.
YES
No
Indicates the number of bytes received on the PPP link. Indicates the number of discarded packets received on the PPP link. Indicates the number of bytes transmitted on the PPP link. Indicates the number of discarded packets transmitted on the PPP link.
NO
NO
Yes
LBFD-003004 / TDLBFD-003004 LBFD-00300402 / TDLBFD-00300402 LBFD-003004 / TDLBFD-003004 LBFD-00300402 / TDLBFD-00300402 LBFD-003004 / TDLBFD-003004 LBFD-00300402 / TDLBFD-00300402 LBFD-003004 / TDLBFD-003004 LBFD-00300402 / TDLBFD-00300402
NO
NO
Yes
NO
NO
Yes
NO
NO
Yes
Indicates the lowest priority of queue 0. If the Differentiated Services Code Point (DSCP) value of a service packet NO is greater than or equal to this parameter value, the service packet is assigned to queue 0.
NO
No
LBFD-00300201 / TDLBFD-00300201
Indicates the lowest priority of queue 1. If the DSCP value of a service packet is smaller than the PRI0 value but NO greater than or equal to this parameter value, the service packet is assigned to queue 1.
NO
No
LBFD-00300201 / TDLBFD-00300201
NO
No
LBFD-00300201 / TDLBFD-00300201
NO
No
LBFD-00300201 / TDLBFD-00300201
NO
No
LBFD-00300201 / TDLBFD-00300201
NO
No
LBFD-00300201 / TDLBFD-00300201
NO
No
LBFD-00300201 / TDLBFD-00300201
Indicates the number of the cabinet that houses the board where a YES transmission resource group is established. Indicates the number of the subrack that houses the board where a YES transmission resource group is established. Indicates the number of the slot corresponding to the board where a transmission resource group is established.
NO
No
LOFD-003011 / TDLOFD-003011
NO
No
LOFD-003011 / TDLOFD-003011
YES
YES
No
LOFD-003011 / TDLOFD-003011
Indicates the bearer type of a YES transmission resource group.
YES
No
LOFD-003011 / TDLOFD-003011
YES
No
LOFD-003011 / TDLOFD-003011
Indicates the type of port where a transmission YES resource group is carried.
YES
No
LOFD-003011 / TDLOFD-003011
YES
NO
No
LOFD-003011 / TDLOFD-003011
YES
No
LOFD-003011 / TDLOFD-003011
Indicates the rate unit of the TX bandwidth, RX bandwidth, TX CIR, NO RX CIR, TX PIR and RX PIR of the transmission resource group.
NO
No
LOFD-003011 / TDLOFD-003011
Indicates the maximum uplink bandwidth of a transmission resource group at the MAC layer when the transmission resource group is NO carried over IP. This parameter value is used as the uplink transport admission bandwidth and TX traffic shaping bandwidth.
YES
No
LOFD-003011 / TDLOFD-003011
Indicates the RX bandwidth of a transmission resource group.
NO
YES
No
LOFD-003011 / TDLOFD-003011
Indicates the TX committed burst size of a transmission resource group.
NO
NO
No
LOFD-003011 / TDLOFD-003011
Indicates the TX excessive burst size NO of a transmission resource group.
NO
No
LOFD-003011 / TDLOFD-003011
Indicates the index of the operator. This parameter is used to differentiate between operators. NO This parameter is reserved for future extension and does not take effect currently.
NO
No
LOFD-003011 / TDLOFD-003011
Indicates the scheduling weight of a transmission resource group. This parameter is used in calculating NO the bandwidth scheduled to a resource group, which helps achieve the user admission control.
NO
No
LOFD-003011 / TDLOFD-003011
Indicates the transmit CIR of the transmission resource group.
NO
YES
No
LOFD-003011 / TDLOFD-003011
Indicates the receive CIR of the transmission resource group.
NO
YES
No
LOFD-003011 / TDLOFD-003011
Indicates the transmit PIR of the transmission resource group.
NO
YES
No
LOFD-003011 / TDLOFD-003011
Indicates the receive PIR of the transmission resource group.
NO
YES
No
LOFD-003011 / TDLOFD-003011
Indicates the size of the peak burst transmitted from the NO transmission resource group.
YES
No
LOFD-003011 / TDLOFD-003011
Indicates the local real-time traffic that is transmitted in a transmission resource group. The local traffic includes NO only the local traffic stream exclusive of the passing-by data flow and non-traffic stream. Indicates the local real-time traffic that is received in a transmission resource group. The local traffic includes NO only the local traffic stream exclusive of the passing-by data flow and non-traffic stream.
NO
Yes
LOFD-003011 / TDLOFD-003011
NO
Yes
LOFD-003011 / TDLOFD-003011
Indicates the local non-real-time traffic that is transmitted in a transmission resource group. The local traffic includes NO only the local traffic stream exclusive of the passing-by data flow and non-traffic stream. Indicates the local non-real-time traffic that is received in a transmission resource group. The local traffic includes NO only the local traffic stream exclusive of the passing-by data flow and non-traffic stream. Indicates the TX bandwidth reserved for non-real-time NO services in a transmission resource group. Indicates the RX bandwidth reserved for non-real-time NO services in a transmission resource group. Indicates the GBR service traffic that is transmitted by the NO transmission resource group. Indicates the GBR service traffic received by the transmission resource group.
NO
Yes
LOFD-003011 / TDLOFD-003011
NO
Yes
LOFD-003011 / TDLOFD-003011
NO
Yes
LOFD-003011 / TDLOFD-003011
NO
Yes
LOFD-003011 / TDLOFD-003011
NO
Yes
LOFD-003011 / TDLOFD-003011
NO
NO
Yes
LOFD-003011 / TDLOFD-003011
Indicates the rate configuration mode NO of the transmission resource group. Indicates the uplink admission bandwidth of the NO transmission resource group.
NO
Yes
LOFD-003011 / TDLOFD-003011
NO
Yes
LOFD-003011 / TDLOFD-003011
Indicates the downlink admission bandwidth of the NO transmission resource group. Indicates the UL Committed Information Rate (CIR) admission bandwidth for the transmission resource group. Indicates the CIR admission bandwidth of the transmission resource group in DL. Indicates the UL PIR admission bandwidth of the transmission resource group. Indicates the PIR admission bandwidth of the transmission resource group in DL.
NO
Yes
LOFD-003011 / TDLOFD-003011
NO
NO
Yes
LOFD-003011 / TDLOFD-003011
NO
NO
Yes
LOFD-003011 / TDLOFD-003011
NO
NO
Yes
LOFD-003011 / TDLOFD-003011
NO
NO
Yes
LOFD-003011 / TDLOFD-003011
Indicates the realtime traffic sent NO on a transmission resource group. Indicates the number of the cabinet that houses the board where a YES transmission resource group is established. Indicates the number of the subrack that houses the board where a YES transmission resource group is established.
NO
Yes
LOFD-003011 / TDLOFD-003011
NO
No
NO
No
Indicates the number of the slot corresponding to the board where a transmission resource group is occupied.
YES
YES
No
YES
No
Indicates the type of port on which a transmission YES resource group is carried.
YES
No
Indicates the number of the port on which a transmission resource group is carried.
YES
NO
No
YES
No
Indicates whether to enable traffic shaping for a transmission resource group. If this parameter is set to ON, traffic shaping is performed according to the TX bandwidth so that the transmit traffic would not exceed NO the capability of downstream routers, thus avoiding unnecessary packet loss and congestion. If this parameter is set to OFF, traffic shaping is not performed during data transmission.
NO
No
Indicates whether to enable the dynamic adjustment of the RX bandwidth of a transmission resource group. If this parameter is set to ON, the TX bandwidth is adjusted according to the network performance and dynamic bandwidth adjustment parameters (down speed PLR NO threshold and down speed delay threshold). The network performance is monitored through IP PM sessions, which can be enabled at the local end or at the peer end. If this parameter is set to OFF, the TX bandwidth is not adjusted.
NO
No
Indicates whether to enable the dynamic adjustment of the RX bandwidth of a transmission resource group. If this parameter is set to ON, the RX bandwidth is adjusted according to the network performance and dynamic bandwidth adjustment parameters (down speed PLR NO threshold and down speed delay threshold). The network performance is monitored through IP PM sessions, which can be enabled at the local end or at the peer end. If this parameter is set to OFF, the RX bandwidth is not adjusted.
NO
No
Indicates the rate downsizing packet loss rate threshold for bandwidth adjustment. When RXBWASW or TXBWASW is set to ON, the estimated available transport bandwidth is reduced if the packet loss rate NO detected through IP Performance Monitoring (IP PM) is higher than this threshold. If the packet loss rate detected through IP PM is lower than this threshold, the estimated available transport bandwidth is increased.
NO
No
Indicates the threshold for delay variation due to rate reduction. When RXBWASW or TXBWASW is set to ON, the estimated NO available transport bandwidth is reduced if the delay variation detected by an IP PM session is above this threshold.
NO
No
Indicates the minimum TX bandwidth that adjustments can achieve. If the RATECFGTYPE (global rate configuration type) and TXBWASW (TX bandwidth adjustment switch) NO parameters are set to SINGLE_RATE and ON, respectively, the TX bandwidth obtained after each adjustment is equal to or larger than the value of this parameter. Indicates the minimum RX bandwidth that adjustments can achieve. If the RATECFGTYPE (global rate configuration type) and RXBWASW (RX bandwidth adjustment switch) NO parameters are set to SINGLE_RATE and ON, respectively, the RX bandwidth obtained after each adjustment is equal to or larger than the value of this parameter.
NO
No
NO
No
Indicates whether to enable the backpressure algorithm of a transmission resource group. The BS monitors the data buffered in the queues of each transmission resource group, determines whether the transmission resource group is congested, and transmits the backpressure NO signals (number and congestion status of the transmission resource group) to each flow control service. If the number of data packets in the buffer of any backpressure queue exceeds 75% of the queue capacity, the BS regards this transmission resource group as
NO
No
Indicates whether backpressure is performed on the OM FTP queue in a transmission resource group. If this parameter is set to ENABLE, the OM FTP queue participates the decision of the congestion status of the transmission resource group, and the OM low-level upload and download data NO preempts the bandwidth of nonreal-time services. If this parameter is set to DISABLE, the OM FTP queue does not participate the decision of the congestion status of the transmission resource group, and the OM low-level upload and download data does not preempt the bandwidth of nonreal-time services.
NO
No
Indicates the number of Priority Queues (PQs) in a transmission resource group. The queues in a transmission resource group are classified into PQs and non-PQs. The scheduling priority of any PQ is higher than that of any nonPQ. There is no Priority Queues when this parameter value is 0.The NO queues numbered from 0 to the result after this parameter value minus 1 are PQs. PQ scheduling is used between PQs. A smaller PQ number indicates a higher scheduling priority. The queues numbered from this parameter value to 6 are non-PQs. Weight Round Robin (WPR) scheduling is used between non-PQs. Indicates the congestion time threshold of a transmission resource group. When TCSW is set to ENABLE, if the buffer time of nonreal-time service data in a transmission NO resource group exceeds the threshold, it indicates that the transmission resource group is congested and the backpressure signals are transmitted.
NO
No
NO
No
Indicates the congestion clear time threshold of a transmission resource group. When TCSW is set to ENABLE, if the buffer time of nonreal-time service data in a transmission NO resource group is below the threshold, it indicates that the transmission resource group is not congested and therefore the congestion clear signals are transmitted.
NO
No
Indicates the TX bandwidth reserved for signaling or OM data. This parameter should be set to a value smaller than the TX bandwidth of a transmission NO resource group. The recommended reserved TX bandwidth is lower than or equal to 3% of the TX bandwidth of a transmission resource group.
NO
No
Indicates the reserved RX bandwidth, which should be set to a value smaller than or equal to the RX bandwidth of a transmission resource group.
NO
NO
No
Indicates the number threshold of discarded packets. This parameter indicates the capability of the queue in a transmission resource group to buffer packets. A greater parameter value indicates a stronger capability. If this parameter is set to 0, the queue in a transmission resource group NO cannot buffer packets, and thus all the delayed packets on the TX channel are discarded. The number threshold of discarded packets determines the maximum amount of data that can be buffered in a transmission resource group. The congestion time threshold of a transmission
NO
No
Indicates the number of the SCTP link.
YES
YES
No
None
Indicates the cabinet number of the SCTP link. Indicates the subrack number of the SCTP link. Indicates the slot number of the SCTP link. Indicates the maximum stream number of the SCTP link.
NO
NO
No
None
NO
NO
No
None
NO
YES
No
None
NO
NO
No
None
Indicates the first local IP address of the SCTP link.
NO
YES
No
None
Indicates the second local IP address of the SCTP link.
NO
NO
No
None
Indicates the local port number of the SCTP link.
NO
YES
No
None
Indicates the first peer IP address of the SCTP link.
NO
YES
No
None
Indicates the second peer IP address of the SCTP link.
NO
NO
No
None
Indicates the peer port number of the SCTP link.
NO
YES
No
None
Indicates the minimum Retransmission Timeout (RTO) value for the SCTP link. A smaller value of this parameter indicates a shorter time required to check link connectivity. The NO time required to check link connectivity is twice the sum of the new RTO and heartbeat interval. The new RTO ranges from the minimum RTO value to maximum RTO value.
NO
No
None
Indicates the maximum RTO value of an SCTP link. A larger value indicates a longer period required for checking link connectivity.
NO
NO
No
None
Indicates the initial RTO value of an SCTP link. A larger value indicates a NO longer period required for checking link connectivity. Indicates the RTO alpha value of an SCTP link. This parameter computes the value of the Smoothed Round-Trip Time (SRTT) for a specific destination address; A larger value of this parameter indicates a higher importance to the last RTT measurement. For definitions of the alpha value, see NO RFC4960. RTO Calculation: The rules governing the computation of SRTT, RTTVAR, and RTO are as follows: 1) Until an RTT measurement has been made for a packet sent to the given destination transport address, set RTO to the protocol parameter 'RTO.Initial'. 2) When the first
NO
No
None
NO
No
None
Indicates the RTO beta value of an SCTP link. This parameter computes the value of the Smoothed Round-Trip Time (SRTT) for a specific destination address; A larger value of this parameter indicates a higher importance to the last RTT measurement. For definitions of the beta value, see NO RFC4960. RTO Calculation: The rules governing the computation of SRTT, RTTVAR, and RTO are as follows: 1) Until an RTT measurement has been made for a packet sent to the given destination transport address, set RTO to the protocol parameter 'RTO.Initial'. 2) When the first
NO
No
None
Indicates the heartbeat interval for an SCTP link. The heartbeat check is independently initiated by each end of an association and then confirmed by the peer end through the HB ACK packet. When no services are NO carried, a link disconnection is determined if the number of heartbeat check attempts reaches the maximum retransmission attempts on an association but the HB ACK packet is not received from the peer end. Indicates the maximum number of retransmissions for the SCTP association. When the number of retransmissions for NO the association exceeds the value of this parameter, the SCTP link is broken and a link failure alarm is reported.
NO
No
None
NO
No
None
Indicates the maximum number of retransmissions over a path. When the number of retransmissions over a path exceeds the value of this parameter, the path NO is regarded as failed if no heartbeat acknowledgment is received. If multiple paths are used, path switching is automatically performed. Indicates whether to calculate the checksum of the data to be sent. This parameter will be removed in later versions. In this version, the setting of this parameter is NO still synchronized between the M2000 and the BS, but it is always set to ENABLE internally. Therefore, avoid setting this parameter to DISABLE.
NO
No
None
NO
No
None
Indicates whether to check the checksum of the packet that is received. This parameter will be removed in later versions. In this version, the setting of this parameter is NO still synchronized between the M2000 and the BS, but it is always set to ENABLE internally. Therefore, avoid setting this parameter to DISABLE. Indicates the checksum algorithm.
NO
No
None
NO
NO
No
None
Indicates whether to switch back to the primary path when it is restored. The SCTP link switches to the secondary path when the primary path cannot be reached. If this parameter is set to ENABLE, the SCTP NO link switches to the primary path when the primary path is restored. If this parameter is set to DISABLE, the SCTP link does not switch to the primary path when the primary path is restored.
NO
No
None
Indicates the number of heartbeats to be detected before the transmission switches back to the primary path. After the primary path is NO restored, the transmission switches back to the primary path when the number of heartbeats detected reaches this value.
NO
No
None
Indicates the status NO of the SCTP link.
NO
Yes
None
Indicates the cause of the latest change that the operational state of the SCTP NO link transits from available to unavailable.
NO
Yes
None
Indicates the time of the latest change that the operational state of the SCTP NO link transits from available to unavailable.
NO
Yes
None
Indicates the number of outbound NO streams negotiated for the SCTP link. Indicates the number of inbound NO streams negotiated for the SCTP link. Indicates the working address flag of the SCTP link. Indicates whether the SCTP link is blocked or not. NO
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
NO
No
None
Indicates the time interval that one end of an SCTP link has to wait before it can send an SACK message in response to the reception of data. A NO larger value of this parameter indicates a longer time interval between the reception of data and the sending of the corresponding SACK message. Indicates the peer description information of the SCTP link.
NO
No
None
NO
NO
No
None
Indicates the number of an IPv6 SCTP link.
YES
YES
No
Indicates the number of streams supported NO simultaneously by an IPv6 SCTP link.
NO
No
Indicates the first local IPv6 address of an IPv6 SCTP link.
NO
YES
No
Indicates the second local IPv6 address of an IPv6 SCTP link.
NO
NO
No
Indicates the local SCTP port number of the IPv6 SCTP link. This parameter must be set to the same value as that NO of the peer SCTP port number in the IPv6 SCTP link configured at the peer end.
YES
No
Indicates the first peer IPv6 address of an IPv6 SCTP link.
NO
YES
No
Indicates the second peer IPv6 address of an IPv6 SCTP link.
NO
NO
No
Indicates the peer SCTP port number of the IPv6 SCTP link. This parameter must be set to the same value as that NO of the local SCTP port number in the IPv6 SCTP link configured at the peer end.
YES
No
Indicates the minimum Retransmission Timeout (RTO) value for the SCTP IPv6 link. A smaller NO value of this parameter indicates a shorter time required to check link connectivity. Indicates the maximum RTO value of an IPv6 SCTP link. A larger value indicates a NO longer period required for checking link connectivity. Indicates the initial RTO value of an IPv6 SCTP link. A larger value indicates a longer period required for checking link connectivity.
NO
No
NO
No
NO
NO
No
Indicates the RTO alpha value of an IPv6 SCTP link. A larger value NO indicates less sensitivity to the link delay. For details, see RFC4960. Indicates the RTO beta value of an IPv6 SCTP link. A larger value NO indicates less sensitivity to the link delay. For details, see RFC4960.
NO
No
NO
No
Indicates the heartbeat interval for an IPv6 SCTP link. The heartbeat check is independently initiated by each end of an association and then confirmed by the peer end through the HB ACK packet indicating normal NO link connection. If the number of heartbeat check attempts reaches the maximum retransmission attempts on an association but the HB ACK packet is not received from the peer end, a link disconnection is determined. Indicates the maximum number of association retransmissions on the IPv6 SCTP link. If the number of retransmissions NO exceeds the value of this parameter, the SCTP link is broken and a link failure alarm is reported.
NO
No
NO
No
Indicates the maximum number of retransmissions over a path of the IPv6 SCTP link. If no heartbeat response is received when the number of retransmissions over a path exceeds NO the value of this parameter, it indicates that the current path cannot be reached. If multiple paths are used on the IPv6 SCTP link, path switching is performed. Indicates the checksum arithmetic.
NO
No
NO
NO
No
Indicates whether to switch back to the primary path when the primary path is restored. The IPv6 SCTP link switches to the secondary path when the primary path cannot NO be reached. This parameter is used to set whether an IPv6 SCTP link switches back to the primary path when the primary path is restored.
NO
No
Indicates the number of heartbeats that are detected before transmission smoothly switches back from the associated secondary path to the primary path. After the associated primary path is NO restored, transmission smoothly switches back from the secondary path to the primary path when the number of detected successive heartbeats reaches this parameter value.
NO
No
Indicates the status of the IPv6 SCTP NO link.
NO
Yes
Indicates the cause of the latest change of the operational state of an IPv6 NO SCTP link from available to unavailable.
NO
Yes
Indicates the last time when the operational state of an IPv6 SCTP link NO changes from available to unavailable. Indicates the number of TX streams negotiated NO for an IPv6 SCTP link. Indicates the number of RX streams negotiated NO for an IPv6 SCTP link. Indicates the working address flag of an IPv6 SCTP link. NO
NO
Yes
NO
Yes
LBFD-003006 / TDLBFD-003006 LOFD-003017 / TDLOFD-003017 LBFD-003006 / TDLBFD-003006 LOFD-003017 / TDLOFD-003017 LBFD-003006 / TDLBFD-003006 LOFD-003017 / TDLOFD-003017 LBFD-003006 / TDLBFD-003006 LOFD-003017 / TDLOFD-003017 LBFD-003006 / TDLBFD-003006 LOFD-003017 / TDLOFD-003017
NO
Yes
NO
Yes
Indicates whether the IPv6 SCTP link NO is blocked. Indicates the peer description information of an IPv6 SCTP link.
NO
No
NO
NO
No
Indicates the source or destination IP YES address used for mapping the VLAN.
YES
No
LBFD-003003 / TDLBFD-003003
Indicates the subnet mask of the source or destination IP YES address used for mapping the VLAN.
YES
No
LBFD-003003 / TDLBFD-003003
Indicates the VLAN NO ID in the VLAN tag.
YES
No
LBFD-003003 / TDLBFD-003003
Indicates the switch that is used to control whether to NO apply UL admission control to a resource group.
NO
No
LOFD-00301101 / TDLOFD-00301101
Indicates the switch that is used to control whether to NO apply DL admission control to a resource group.
NO
No
LOFD-00301101 / TDLOFD-00301101
Indicates the activity factor of the service data with QoS Class Indicator (QCI) of 1. The activity factor must NO be set for the service with each QCI, because services of different QCIs experience different loads.
NO
No
Indicates the activity factor of the service NO data of QCI 2.
NO
No
NO
No
NO
No
NO
No
NO
No
NO
No
NO
No
NO
No
Indicates the UL admission threshold for handed-over services. A large value of this NO parameter will result in a high UL admission success rate of handed-over services.
NO
No
LOFD-00301101 / TDLOFD-00301101
Indicates the DL admission threshold for handed-over services. A large value of this NO parameter will result in a high DL admission success rate of handed-over services.
NO
No
LOFD-00301101 / TDLOFD-00301101
Indicates the UL admission threshold for new Gold-level services. A large value of this NO parameter will result in a high UL admission success rate of new Goldlevel services.
NO
No
LOFD-00301101 / TDLOFD-00301101
Indicates the DL admission threshold for new Gold-level services. A large value of this NO parameter will result in a high DL admission success rate of new Goldlevel services.
NO
No
LOFD-00301101 / TDLOFD-00301101
Indicates the UL admission threshold for new Silver-level services. A large value of this NO parameter will result in a high UL admission success rate of new Silverlevel services.
NO
No
LOFD-00301101 / TDLOFD-00301101
Indicates the DL admission threshold for new Silver-level services. A large value of this NO parameter will result in a high DL admission success rate of new Silverlevel services.
NO
No
LOFD-00301101 / TDLOFD-00301101
Indicates the UL admission threshold for new Copperlevel services. A large value of this NO parameter will results in a high UL admission success rate of new Copperlevel services.
NO
No
LOFD-00301101 / TDLOFD-00301101
Indicates the DL admission threshold for new Copperlevel services. A large value of this NO parameter will result in a high DL admission success rate of new Copperlevel services.
NO
No
LOFD-00301101 / TDLOFD-00301101
Indicates the uplink transport admission threshold for the Guaranteed the Bit Rate (GBR) service. A large value of this NO parameter will result in a high UL admission success rate of GBR services.
NO
No
LOFD-00301101 / TDLOFD-00301101
Indicates the DL admission threshold for the guaranteed bit rate (GBR) service. A large value of this NO parameter will result in a high DL admission success rate of GBR services.
NO
No
LOFD-00301101 / TDLOFD-00301101
Indicates the switch that is used to control whether to enable the UL preemption algorithm. If this parameter is set to ON, the UL pre-emption algorithm is enabled. In this case, the service with a higher priority that requests admission may preempt the resources of admitted services with lower priorities NO when UL transmission bandwidth is insufficient. If this parameter is set to OFF, the UL preemption algorithm is disabled. In this case, services with higher priorities that request admission cannot pre-empt the resources of admitted services with lower priorities when UL transmission
NO
No
LOFD-00301101 / TDLOFD-00301101
Indicates the switch that is used to control whether to enable the DL preemption algorithm. If this parameter is set to ON, the DL pre-emption algorithm is enabled. In this case, the service with a higher priority that requests admission can preempt the resources of admitted services with lower priorities NO when DL transmission bandwidth is insufficient. If this parameter is set to OFF, the DL preemption algorithm is disabled. In this case, services with higher priorities that request admission cannot pre-empt the resources of admitted services with lower priorities when DL transmission
NO
No
LOFD-00301101 / TDLOFD-00301101
Indicates the switch that is used to control whether to enable UL overbooking admission control. It NO is used to determine the admission bandwidth of the resource group and facilitate admission control.
NO
No
LOFD-00301101 / TDLOFD-00301101
Indicates the switch that is used to control whether to enable DL overbooking admission control. It NO is used to determine the admission bandwidth of the resource group and facilitate admission control.
NO
No
LOFD-00301101 / TDLOFD-00301101
Indicates the switch that is used to control whether to apply UL admission control to a physical port. If this parameter is set to ON, UL admission NO control is applied to the physical port. If this parameter is set to OFF, UL admission control is not applied to the physical port.
NO
No
LOFD-00301101 / TDLOFD-00301101
Indicates the switch that is used to control whether to apply DL admission control to a physical port. If this parameter is set to ON, DL admission NO control is applied to the physical port. If this parameter is set to OFF, DL admission control is not applied to the physical port. Indicates the threshold for triggering the UL high load. If the ratio of the UL transport load to the UL transport bandwidth of the BS keeps above this threshold for a period of hysteresis, the UL transport NO load of the BS enters the high-load state. In UL highload state, the BS sends a UL S1 TNL Load Indicator, which is set to HighLoad, to each neighboring BS through the X2 interface.
NO
No
LOFD-00301101 / TDLOFD-00301101
NO
No
LOFD-001032 / TDLOFD-001032
Indicates the threshold for triggering the DL high load. If the ratio of the DL transport load to the DL transport bandwidth of the BS keeps above this threshold for a period of hysteresis, the DL transport NO load of the BS enters the high-load state. In DL highload state, the BS sends a DL S1 TNL Load Indicator, which is set to HighLoad, to each neighboring BS through the X2 interface. Indicates the threshold for clearing the UL high load. If the ratio of the UL transport load to the UL transport bandwidth of the BS keeps below this threshold for a period of hysteresis, the UL NO transport load of the BS enters the medium-load state. In UL medium load state, the BS sends a UL S1 TNL Load Indicator, which is set to MediumLoad, to each neighboring BS through the X2 interface.
NO
No
LOFD-001032 / TDLOFD-001032
NO
No
LOFD-001032 / TDLOFD-001032
Indicates the threshold for clearing the DL high load. If the ratio of the transport load to the transmission bandwidth in DL of the BS keeps below this threshold for a period of time, the DL transport load of NO the BS enters the medium-load state. In DL medium-load state, the BS sends a DL S1 TNL Load Indicator, which is set to MediumLoad, to each neighboring BS through the X2 interface. Indicates the threshold for triggering the UL medium load. If the ratio of the UL transport load to the UL transport bandwidth of the BS is above this threshold, the UL transport load of the NO BS enters the medium-load state. In UL medium-load state, the BS sends a UL S1 TNL Load Indicator, which is set to MediumLoad, to each neighboring BS through the X2 interface.
NO
No
LOFD-001032 / TDLOFD-001032
NO
No
LOFD-001032 / TDLOFD-001032
Indicates the threshold for triggering the DL medium load. If the ratio of the DL transport load to the DL transport bandwidth of the BS is above this threshold, the DL transport load of the NO BS enters the medium-load state. In DL medium-load state, the BS sends a DL S1 TNL Load Indicator, which is set to MediumLoad, to each neighboring BS through the X2 interface. Indicates the threshold for clearing the UL medium load. If the ratio of the UL transport load to the UL transport bandwidth of the BS is below this threshold, the UL transport load of the NO BS enters the lowload state. In UL low-load state, the BS sends a UL S1 TNL Load Indicator, which is set to LowLoad, to each neighboring BS through the X2 interface.
NO
No
LOFD-001032 / TDLOFD-001032
NO
No
LOFD-001032 / TDLOFD-001032
Indicates the threshold for clearing the DL medium load. If the ratio of the DL transport load to the DL transport bandwidth of the BS is below this threshold, the DL transport load of the NO BS enters the lowload state. In DL low-load state, the BS sends a DL S1 TNL Load Indicator, which is set to LowLoad, to each neighboring BS through the X2 interface. Indicates whether to enable the function of clearing faults on a transmission link. If this parameter is set to ENABLE, the system automatically detects a faulty transmission link. If NO the BS cannot be maintained due to a faulty link and services are disrupted for a certain period of time, automatic reset of the BS is performed to clear the faults.
NO
No
LOFD-001032 / TDLOFD-001032
NO
No
None
Indicates the UL Over Load Control (OLC) algorithm switch. In the case of enabled switch, the bandwidth of the services with low priority would be released to NO guarantee the QoS of the services of high priority when the TX bandwidth changes or during the overload caused by real-time services.
NO
No
LOFD-00301103 / TDLOFD-00301103
Indicates the switch for the DL OLC algorithm. If this parameter is set to ON, bandwidth of the services of a low priority is released to guarantee the QoS NO of the services of a high priority when transport bandwidth changes or overload occurs due to increased load of non-flow control services.
NO
No
LOFD-00301103 / TDLOFD-00301103
Indicates the threshold for triggering the UL OLC. When the UL bandwidth occupancy reaches NO the threshold, lowpriority services are removed to guarantee the quality of highpriority services.
NO
No
LOFD-00301103 / TDLOFD-00301103
Indicates the threshold for clearing the UL OLC. When the UL bandwidth NO occupancy is below this threshold, user services are no longer removed.
NO
No
LOFD-00301103 / TDLOFD-00301103
Indicates the number of released NO services during an OLC action period.
NO
No
LOFD-00301103 / TDLOFD-00301103
Indicates the threshold for triggering the DL OLC. When the DL bandwidth occupancy reaches NO the threshold, lowpriority services are removed to guarantee the quality of highpriority services.
NO
No
LOFD-00301103 / TDLOFD-00301103
Indicates the threshold for clearing the DL OLC. When the DL bandwidth NO occupancy is below this threshold, user services are no longer removed.
NO
No
LOFD-00301103 / TDLOFD-00301103
Indicates the mode of the ping filtering. When the whitelist is used, only the network segments or hosts specified NO by the ping filter can ping the NE. When the blacklist is used, the network segments or hosts. Indicates the number of packets discarded due to fragmentation failures on the transmitter.
NO
No
None
NO
NO
Yes
None
Indicates the number of received NO packets that have been encrypted. Indicates the number of packets that have been successfully decrypted at the receiver.
NO
Yes
None
NO
NO
Yes
None
Indicates the number of received packets that fail the NO ESP-based decryption.
NO
Yes
None
Indicates the number of received packets that fail the NO AH-based authentication. Indicates the number of received packets that should NO not have been encrypted. Indicates the total number of packets received by the decryption module of the receiver at the IP layer.
NO
Yes
None
NO
Yes
None
NO
NO
Yes
None
Indicates the total number of packets that fail decryption NO at the IP layer of the receiver. Indicates the number of received NO IKE packets. Indicates the number of encrypted packets received by the IP NO layer of the receiver from invalid IP addresses. Indicates the total number of packets discarded at the IP NO layer of the receiver due to replay attacks. Indicates the total number of packets discarded at the IP NO layer of the receiver due to a lack of inbound SA. Indicates the total number of packets discarded because the IP layer of the NO receiver does not support the AH algorithm.
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
Yes
None
Indicates the total number of packets discarded because the IP layer of the NO receiver does not support the ESP algorithm. Indicates the total number of plain packets received at NO the IP layer of the receiver. Indicates the number of packets received at the IP layer that comply with ACL rules and should have been encrypted.
NO
Yes
None
NO
Yes
None
NO
NO
Yes
None
Indicates the number of transmitted packets NO that are successfully encrypted. Indicates the number of packets that fail to be encrypted at the transmitter.
NO
Yes
None
NO
NO
Yes
None
Indicates the total number of received NO packets. Indicates the number of packets that need to be encrypted at the transmitter.
NO
Yes
None
NO
NO
Yes
None
Indicates the number of packets discarded at the NO transmitter because the outbound SAs do not exist. Indicates the number of packets discarded because NO the transmitter does not support the AH algorithm.
NO
Yes
None
NO
Yes
None
Indicates the number of packets discarded because NO the transmitter does not support the ESP algorithm. Indicates the number of packets that fail the AHNO based authentication at the transmitter. Indicates the number of transmitted packets NO that fail ESP encryption. Indicates the number of packets discarded due to transmitting sequence number overflow.
NO
Yes
None
NO
Yes
None
NO
Yes
None
NO
NO
Yes
None
Indicates the number of packets that do not need to NO be encrypted at the transmitter. Indicates the number of transmitted IKE packets. Indicates the number of the source cabinet where the tunnel is configured. Indicates the number of the source subrack where the tunnel is configured. Indicates the number of the source slot where the tunnel is configured.
NO
Yes
None
NO
NO
Yes
None
YES
NO
No
MRFD-231501 LOFD-003002 / TDLOFD-003002
YES
NO
No
MRFD-231501 LOFD-003002 / TDLOFD-003002
YES
YES
No
MRFD-231501 LOFD-003002 / TDLOFD-003002
Indicates the index of the tunnel.
YES
YES
No
MRFD-231501 LOFD-003002 / TDLOFD-003002
Indicates the number of the destination cabinet where the tunnel is located.
NO
YES
No
MRFD-231501 LOFD-003002 / TDLOFD-003002
Indicates the number of the destination subrack NO where the tunnel is located. Indicates the number of the destination slot where the tunnel is located.
YES
No
MRFD-231501 LOFD-003002 / TDLOFD-003002
NO
YES
No
MRFD-231501 LOFD-003002 / TDLOFD-003002
Indicates the number of bytes received through the tunnel.
NO
NO
Yes
MRFD-231501 LOFD-003002 / TDLOFD-003002
Indicates the actual number of packets NO received through a tunnel.
NO
Yes
MRFD-231501 LOFD-003002 / TDLOFD-003002
Indicates the actual number of bytes NO sent through the tunnel.
NO
Yes
MRFD-231501 LOFD-003002 / TDLOFD-003002
Indicates the actual number of packets NO sent through the tunnel.
NO
Yes
MRFD-231501 LOFD-003002 / TDLOFD-003002
Indicates the VLAN group that the added VLAN mapping belongs to. Multiple VLAN groups are used in YES the scenario in which telecom operators share transport resources and use different VLAN policies. Indicates the traffic type. Traffic of different types is transmitted through different VLANs. High-priority OM data includes the data of NTP/SNTP, remote maintenance channel switchover, and TCP (excluding YES that related to FTP). Low-priority OM data includes the data of the File Transfer Protocol (FTP) service. Other data refers to the data except the user data, signaling, high-priority OM data, and lowpriority OM data.
YES
No
LBFD-003003 / TDLBFD-003003
YES
No
LBFD-003003 / TDLBFD-003003
Indicates the DSCP YES priority of user data.
NO
No
LBFD-003003 / TDLBFD-003003
Indicates the VLAN ID that the service NO data belongs to. Indicates the VLAN priority. A greater parameter value NO denotes a higher priority.
YES
No
LBFD-003003 / TDLBFD-003003
NO
No
LBFD-003003 / TDLBFD-003003
Indicates the next hop IP address used for mapping the VLAN.
YES
YES
No
LBFD-003003 / TDLBFD-003003
Indicates the subnet mask of the next hop IP address YES used for mapping the VLAN.
NO
No
LBFD-003003 / TDLBFD-003003
Indicates the VLAN mode. When this parameter is set to SINGLEVLAN, the configured VLAN ID and VLAN priority can be directly used to label the VLAN tag. If this parameter is set to VLANGROUP, the next hop IP addresses are mapped to the VLAN groups, and NO then mapped to the VLAN tags in the VLAN groups according to the DSCPs of the IP packets. In VLAN group mode, ensure that the VLAN groups have been configured by running the ADD VLANCLASS command. Otherwise, the configuration does not take effect.
YES
No
LBFD-003003 / TDLBFD-003003
Indicates the VLAN NO ID in the VLAN tag.
YES
No
LBFD-003003 / TDLBFD-003003
Indicates the VLAN NO priority.
NO
No
LBFD-003003 / TDLBFD-003003
Indicates the VLAN NO group number.
YES
No
LBFD-003003 / TDLBFD-003003
Indicates whether to set the priority of a single VLAN. If a special VLAN mapping is not required, it is recommended that the parameter be set to DISABLE. In this case, the default VLAN mapping is used. The following describes the default mapping between DSCPs and priorities: NO If the DSCP is within the range from 0 to 7, the default priority is 0; If the DSCP is within the range from 8 to 15, the default priority is 1; If the DSCP is within the range from 16 to 23, the default priority is 2; If the DSCP is within the range from 24 to 31, the default priority is 3; If the DSCP is
NO
No
LBFD-003003 / TDLBFD-003003
Indicates the maximum wait time for an echo response. If no echo response is NO received during the period specified by this parameter, the timer has expired.
NO
No
None
Indicates the maximum number of timeouts of the echo response waiting timer. If no echo response is NO received after the number specified by this parameter is reached, the GTP-U path in use fails.
NO
No
None
Indicates the Differentiated Services Code Point (DSCP) of a GTP-U control packet.
NO
NO
No
None
Indicates whether to enable static detection in compliance with GPRS Tunneling Protocol for User Plane (GTP-U). If this parameter is set to ENABLE, the GTP-U static check NO is enabled. In this case, the ALM25886 IP Path Fault alarm is reported if a link bearing an IP path is faulty. If this parameter is set to DISABLE, the GTPU static check is disabled.
NO
No
None
Feature Name
Value Type
GUI Value Range
Enumeration Number/Bit
Unit
Remote Electrical Tilt Control
Interval Type
0~35
N/A
None
Interval Type
0 N/A
None
Interval Type
60~254
N/A
None
Interval Type
0 N/A
None
Character String Type
0~128 characters
N/A
None
Interval Type
0~15
N/A
degree
Interval Type
30,65,90,360
N/A
degree
Interval Type
33~64
N/A
None
Enumeration Type
INTELLIGENT, DISTRIBUTED
INTELLIGENT~1, DISTRIBUTED~2
None
Remote Electrical Tilt Control Remote Electrical Tilt Control
Enumeration Type
SINGLE, DUAL
SINGLE~1, DUAL~2 N/A
None
Interval Type
0~360
degree
Enumeration Type
FOURPORTS(Four Ports), FOURPORTS~0, EIGHTPORTS(Eigh EIGHTPORTS~1 t Ports)
None
Interval Type
0~100
N/A
0.01
Interval Type
-180~180
N/A
degree
Interval Type
0~100
N/A
0.01
Interval Type
-180~180
N/A
degree
Interval Type
0~100
N/A
0.01
Interval Type
-180~180
N/A
degree
Interval Type
0~100
N/A
0.01
Interval Type
-180~180
N/A
degree
Interval Type
0~100
N/A
0.01
Interval Type
-180~180
N/A
degree
Interval Type
0~100
N/A
0.01
Interval Type
-180~180
N/A
degree
None
Interval Type
0~1048575
N/A
None
None
1~64 characters
N/A
None
None
Enumeration Type
DBS3900_LTE(DB S3900 LTE), BTS3900_LTE(BTS 3900 LTE), BTS3900A_LTE(BT S3900A LTE), BTS3900L_LTE(BT S3900L LTE), BTS3900AL_LTE(B TS3900AL LTE)
DBS3900_LTE~1, BTS3900_LTE~2, BTS3900A_LTE~3, None BTS3900L_LTE~4, BTS3900AL_LTE~5
Adaptive Power Consumption
Enumeration Type
ON(ON), OFF(OFF) ON~0, OFF~1
None
Compound Type
22:00:00~5:00:00
N/A
None
Compound Type
23:00:00~6:00:00
N/A
None
None
Interval Type
180000000~180000 N/A 000
1e-6 degree
None
Interval Type
90000000~9000000 N/A 0
1e-6 degree
None
0~20 characters
N/A
None
None
Enumeration Type
Default, Normal, Demo, Protected, Emergency
Default~0, Normal~1, Demo~2, None Protected~3, Emergency~4
None
Enumeration Type
Poweroff(Power off), Normal
Poweroff~0, Normal~1
None
None
0~128 characters
N/A
None
None
Enumeration Type
DEG, SEC
DEG~0, SEC~1
None
None
0~16 characters
N/A
None
0~16 characters
N/A
None
Enumeration Type
CPRI, TDL_IR
CPRI~0, TDL_IR~1 None
None
Enumeration Type
Transmission_Pack et_Loss_Rate(Tran smission Packet Loss Rate), Transmission_Dela y(Transmission Delay), Transmission_Jitter( Transmission Jitter), Packet_Loss_Rate( Packet Loss Rate), Cell_RRC_Connect _Succ_Rate(Cell RRC Connect Succ Rate), Cell_ERAB_Setup_ Succ_Rate(Cell ERAB Setup Succ Rate), Cell_Call_Drop_Rat e(Cell Call Drop Rate), IntraFrequency_HO_Su cc_Rate(IntraFrequency HO Succ Rate), InterFrequency_HO_Su cc_Rate(Inter Frequency HO Succ Rate), LTECDMA_Handover_ Succ_Rate(LTECDMA Handover Succ Rate), LTE-
Transmission_Pack et_Loss_Rate~0, Transmission_Dela y~1, Transmission_Jitter ~2, Packet_Loss_Rate~ 3, Cell_RRC_Connect _Succ_Rate~4, Cell_ERAB_Setup_ Succ_Rate~5, Cell_Call_Drop_Rat None e~6, IntraFrequency_HO_Su cc_Rate~7, InterFrequency_HO_Su cc_Rate~8, LTECDMA_Handover_ Succ_Rate~9, LTEWCDMA_Handover _Succ_Rate~10, LTEGERAN_Handover _Succ_Rate~11
None
Enumeration Type
None
None
Interval Type
0~4294967295
N/A
None
None
Interval Type
0~4294967295
N/A
None
None
Interval Type
0~4294967295
N/A
None
None
Enumeration Type
15minutes(15minut es), 30minutes(30minut es), 60minutes(60minut es), 1day(1day 1440minutes)
15minutes~15, 30minutes~30, 60minutes~60, 1day~1440
min
None
Interval Type
0~23
N/A
None
Interval Type
1~3
N/A
None
None
Interval Type
0~17
N/A
None
None
Interval Type
180000000~180000 N/A 000
1e-6 degree
None
Interval Type
90000000~9000000 N/A 0
1e-6 degree
None
Enumeration Type
1T1R~0, 1T2R~1, 1T1R, 1T2R, 2T2R, 2T2R~3, 2T4R~4, 2T4R, 4T4R, 8T8R 4T4R~5, 8T8R~6
None
RRU Channel Cross Connection Under MIMO
Enumeration Type
NormalMIMO(Norm al MIMO), NormalMIMO~0, AIDMIMO(mutual- AIDMIMO~1 aid MIMO)
None
None
Enumeration Type
COMBTYPE_SING LE_RRU, COMBTYPE_TWO _RRU, COMBTYPE_THRE E_RRU, COMBTYPE_FOUR _RRU, COMBTYPE_FIVE_ RRU, COMBTYPE_SIX_ RRU, COMBTYPE_SEVE N_RRU, COMBTYPE_EIGH T_RRU
COMBTYPE_SING LE_RRU~0, COMBTYPE_TWO _RRU~1, COMBTYPE_THRE E_RRU~2, COMBTYPE_FOUR _RRU~3, None COMBTYPE_FIVE_ RRU~4, COMBTYPE_SIX_ RRU~5, COMBTYPE_SEVE N_RRU~6, COMBTYPE_EIGH T_RRU~7
None
Interval Type
0~62
N/A
None
None
Interval Type
4~5,60~254
N/A
None
None
Interval Type
0~8
N/A
None
None
Enumeration Type
R0A, R0B, R0C, R0D, R0E, R0F, R0G, R0H, R1A, R1B, R2A, R2B, R3A, R3B, R4A, R4B, R5A, R5B, R6A, R6B, R7A, R7B
R0A~0, R0B~1, R0C~2, R0D~3, R0E~4, R0F~5, R0G~6, R0H~7, R1A~16, R1B~17, R2A~32, R2B~33, None R3A~48, R3B~49, R4A~64, R4B~65, R5A~80, R5B~81, R6A~96, R6B~97, R7A~112, R7B~113
None
Interval Type
0~62
N/A
None
None
Interval Type
4~5,60~254
N/A
None
None
Interval Type
0~8
N/A
None
None
Enumeration Type
None
Interval Type
0~62
N/A
None
None
Interval Type
4~5,60~254
N/A
None
None
Interval Type
0~8
N/A
None
None
Enumeration Type
None
Interval Type
0~62
N/A
None
None
Interval Type
4~5,60~254
N/A
None
None
Interval Type
0~8
N/A
None
None
Enumeration Type
None
Interval Type
0~62
N/A
None
None
Interval Type
4~5,60~254
N/A
None
None
Interval Type
0~8
N/A
None
None
Enumeration Type
None
Interval Type
0~62
N/A
None
None
Interval Type
4~5,60~254
N/A
None
None
Interval Type
0~8
N/A
None
None
Enumeration Type
None
Interval Type
0~62
N/A
None
None
Interval Type
4~5,60~254
N/A
None
None
Interval Type
0~8
N/A
None
None
Enumeration Type
None
Interval Type
0~62
N/A
None
None
Interval Type
4~5,60~254
N/A
None
None
Interval Type
0~8
N/A
None
None
Enumeration Type
None
Interval Type
0~62
N/A
None
None
Interval Type
4~5,60~254
N/A
None
None
Interval Type
0~8
N/A
None
None
Enumeration Type
None
Interval Type
0~62
N/A
None
None
Interval Type
4~5,60~254
N/A
None
None
Interval Type
0~8
N/A
None
None
Enumeration Type
None
Interval Type
0~62
N/A
None
None
Interval Type
4~5,60~254
N/A
None
None
Interval Type
0~8
N/A
None
None
Enumeration Type
None
Interval Type
0~62
N/A
None
None
Interval Type
4~5,60~254
N/A
None
None
Interval Type
0~8
N/A
None
None
Enumeration Type
None
0~30 characters
N/A
None
None
Interval Type
-32767~32767
N/A
None
Interval Type
0~1800000
N/A
None
Interval Type
0~1800000
N/A
None
Interval Type
0~179
N/A
degree
None
Interval Type
0~990
N/A
None
Interval Type
0~100
N/A
None
Enumeration Type
DEG, SEC
DEG~0, SEC~1
None
None
0~16 characters
N/A
None
0~16 characters
N/A
None
Enumeration Type
FALSE, TRUE
FALSE~0, TRUE~1 None
None
Interval Type
0~62
N/A
None
None
Interval Type
4~5,60~254
N/A
None
None
Interval Type
0~8
N/A
None
None
Enumeration Type
None
Interval Type
0~62
N/A
None
None
Interval Type
4~5,60~254
N/A
None
None
Interval Type
0~8
N/A
None
None
Enumeration Type
None
Interval Type
0~62
N/A
None
None
Interval Type
4~5,60~254
N/A
None
None
Interval Type
0~8
N/A
None
None
Enumeration Type
None
Interval Type
0~62
N/A
None
None
Interval Type
4~5,60~254
N/A
None
None
Interval Type
0~8
N/A
None
None
Enumeration Type
None
Interval Type
0~500
N/A
0.1dBm
None
Enumeration Type
Normal, NoLicense
Normal~0, NoLicense~1
None
None
0~40 characters
N/A
0.1MHz
None
0~40 characters
N/A
0.1MHz
Enumeration Type
COMPATIBLE, HTTPS_ONLY, LOGIN_HTTPS_O NLY
COMPATIBLE~0, HTTPS_ONLY~1, LOGIN_HTTPS_O NLY~2
None
Interval Type
0~35
N/A
None
0~2 characters
N/A
None
0~36 characters
N/A
None
0~49 characters
N/A
None
Interval Type
0~62
N/A
None
Interval Type
4~5,60~254
N/A
None
Interval Type
0~8
N/A
None
Enumeration Type
AISG1.1(AISG1.1), AISG2.0(AISG2.0), 3GPP(3GPP), UNKNOWN(NULL) 0~8
AISG1.1~1, AISG2.0~2, 3GPP~3, UNKNOWN~255 N/A
None
Interval Type
None
None
0~2 characters
N/A
None
None
0~36 characters
N/A
None
0~19 characters
N/A
None
Character String Type Character String Type
0~127 characters
N/A
None
0~19 characters
N/A
None
Enumeration Type
SINGLE_RET(SIN GLE_RET), SINGLE_RET~1, STMA(STMA), STMA~2, MULTI_RET(MULTI MULTI_RET~17 _RET) R0A(R0A), R0B(R0B), RET_PORT(RET_P ORT), R0C(R0C), R0D(R0D), R0E(R0E), R0F(R0F), R0G(R0G), R0H(R0H), NULL(NULL)
None
None
Enumeration Type
R0A~0, R0B~1, RET_PORT~2, R0C~3, R0D~4, R0E~5, R0F~6, R0G~7, R0H~8, NULL~65535
None
Interval Type
0~62
N/A
None
Interval Type
4~5,60~254
N/A
None
Interval Type
0~8
N/A
None
Enumeration Type
R0A(R0A), R0B(R0B), R0C(R0C), R0D(R0D), R0E(R0E), R0F(R0F), R0G(R0G), R0H(R0H)
R0A~0, R0B~1, R0C~2, R0D~3, R0E~4, R0F~5, R0G~6, R0H~7
None
Interval Type
0~1000
N/A
Interval Type
0~50
N/A
ns
Interval Type
0~50
N/A
ns
Enumeration Type
None
Enumeration Type
UER_SELF_DEFIN E(UER_SELF_DEF INE), TMA12DB_ONLY_ NON_AISG(TMA12 DB_ONLY_NON_AI SG), TMA24DB_ONLY_ NON_AISG(TMA24 DB_ONLY_NON_AI SG), RET_ONLY_COAXI AL(RET_ONLY_CO AXIAL), TMA12DB_AISG(T MA12DB_AISG), TMA24DB_AISG(T MA24DB_AISG)
UER_SELF_DEFIN E~0, TMA12DB_ONLY_ NON_AISG~1, TMA24DB_ONLY_ None NON_AISG~2, RET_ONLY_COAXI AL~3, TMA12DB_AISG~5, TMA24DB_AISG~6
Interval Type
0~3500
N/A
mA
Interval Type
0~3500
N/A
mA
Interval Type
0~3500
N/A
mA
Interval Type
0~3500
N/A
mA
Interval Type
0~3500 ON(ON), OFF(OFF), NULL(NULL)
N/A
mA
Enumeration Type
ON~0, OFF~1, None NULL~4294967295
Enumeration Type
SINGLE_RET(SIN GLE_RET), SINGLE_RET~1, MULTI_RET(MULTI MULTI_RET~17 _RET)
None
Enumeration Type
SINGLE(SINGLE), DUAL(DUAL)
SINGLE~1, DUAL~2
None
Enumeration Type
REGULAR(REGUL AR), REGULAR~1, DAISY_CHAIN(DAI DAISY_CHAIN~2 SY_CHAIN)
None
Interval Type
1~8
N/A
None
None
Enumeration Type
RET(RET), RET~0, VRET~1 VRET(Virtual RET)
None
Interval Type
0~35
N/A
None
0~2 characters
N/A
None
0~36 characters
N/A
None
0~49 characters
N/A
None
Interval Type
0~62
N/A
None
Interval Type
4~5,60~254
N/A
None
Interval Type
0~8
N/A
None
Enumeration Type
None
Interval Type
None
None
0~2 characters
N/A
None
None
0~36 characters
N/A
None
0~19 characters
N/A
None
0~127 characters
N/A
None
0~19 characters
N/A
None
Enumeration Type
None
None
Enumeration Type
None
Interval Type
0~35
N/A
None
Interval Type
1~8
N/A
None
Interval Type
0~359
N/A
degree
0~15 characters
N/A
None
0~32 characters
N/A
None
Interval Type
0~359
N/A
degree
Interval Type
0~359
N/A
degree
Interval Type
0~359
N/A
degree
Interval Type
0~359
N/A
degree
Interval Type
0~255
N/A
0.1dBi
Interval Type
0~255
N/A
0.1dBi
Interval Type
0~255
N/A
0.1dBi
Interval Type
0~255
N/A
0.1dBi
0~6 characters
N/A
None
Interval Type
-100~300
N/A
0.1degree
0~5 characters
N/A
None
Enumeration Type
UNUSED(UNUSED ), BandI(BandI), BandII(BandII), BandIII(BandIII), BandIV(BandIV), BandV(BandV), BandVI(BandVI), BandVII(BandVII), BandVIII(BandVIII), BandIX(BandIX), BandX(BandX)
UNUSED~0, BandI~1, BandII~2, BandIII~3, BandIV~4, BandV~5, None BandVI~6, BandVII~7, BandVIII~8, BandIX~9, BandX~10
Enumeration Type
Enumeration Type
Enumeration Type
0~32 characters
N/A
None
0~17 characters
N/A
None
Interval Type
-1800~1800
N/A
0.1degree
Interval Type
-1800~1800
N/A
0.1degree
None
Enumeration Type
UNUSED(UNUSED ), BandI(BandI), BandII(BandII), BandIII(BandIII), BandIV(BandIV), BandV(BandV), BandVI(BandVI), BandVII(BandVII), BandVIII(BandVIII), BandIX(BandIX), BandX(BandX), NULL(NULL) UNUSED(UNUSED ), BandI(BandI), BandII(BandII), BandIII(BandIII), BandIV(BandIV), BandV(BandV), BandVI(BandVI), BandVII(BandVII), BandVIII(BandVIII), BandIX(BandIX), BandX(BandX), NULL(NULL) UNUSED(UNUSED ), BandI(BandI), BandII(BandII), BandIII(BandIII), BandIV(BandIV), BandV(BandV), BandVI(BandVI), BandVII(BandVII), BandVIII(BandVIII), BandIX(BandIX), BandX(BandX), NULL(NULL) UNUSED(UNUSED ), BandI(BandI), BandII(BandII), BandIII(BandIII), BandIV(BandIV), BandV(BandV), BandVI(BandVI), BandVII(BandVII), BandVIII(BandVIII), BandIX(BandIX), BandX(BandX), NULL(NULL)
UNUSED~0, BandI~1, BandII~2, BandIII~3, BandIV~4, BandV~5, BandVI~6, None BandVII~7, BandVIII~8, BandIX~9, BandX~10, NULL~4294967295 UNUSED~0, BandI~1, BandII~2, BandIII~3, BandIV~4, BandV~5, BandVI~6, None BandVII~7, BandVIII~8, BandIX~9, BandX~10, NULL~4294967295 UNUSED~0, BandI~1, BandII~2, BandIII~3, BandIV~4, BandV~5, BandVI~6, None BandVII~7, BandVIII~8, BandIX~9, BandX~10, NULL~4294967295 UNUSED~0, BandI~1, BandII~2, BandIII~3, BandIV~4, BandV~5, BandVI~6, None BandVII~7, BandVIII~8, BandIX~9, BandX~10, NULL~4294967295
None
Enumeration Type
None
Enumeration Type
None
Enumeration Type
None
Interval Type
0~359
N/A
degree
None
Interval Type
0~359
N/A
degree
None
Interval Type
0~359
N/A
degree
None
Interval Type
0~359
N/A
degree
None None None None Remote Electrical Tilt Control
Interval Type Interval Type Interval Type Interval Type
0~255 0~255 0~255 0~255
N/A N/A N/A N/A
0.1dBi 0.1dBi 0.1dBi 0.1dBi
Interval Type
0 N/A
None
Interval Type
60~254
N/A
None
Interval Type
0 N/A
None
Enumeration Type
RET_PORT(RET_P RET_PORT~2 ORT)
None
Enumeration Type
None
Enumeration Type
UER_SELF_DEFIN E(UER_SELF_DEF INE), RET_ONLY_MULTI CORE(RET_ONLY _MULTICORE)
UER_SELF_DEFIN E~0, None RET_ONLY_MULTI CORE~4
Interval Type
0~3500
N/A
mA
Interval Type
0~3500
N/A
mA
Interval Type
0~3500
N/A
mA
Interval Type
0~3500
N/A
mA
Interval Type
0~3500 ON(ON), OFF(OFF), NULL(NULL)
N/A
mA
Enumeration Type
ON~0, OFF~1, None NULL~4294967295
Interval Type
0~35
N/A
None
Interval Type
1~8
N/A
None
Enumeration Type
AVAILABLE(AVAIL ABLE), AVAILABLE~0, UNAVAILABLE(UN UNAVAILABLE~1, AVAILABLE), BREAKLINK~2 BREAKLINK(BREA KLINK) -100~300 N/A
None
Remote Electrical Tilt Control None
Interval Type
0.1degree
Interval Type
0~17
N/A
None
Interval Type
0~62,255
N/A
None
Interval Type
4~5,60~255
N/A
None
Interval Type
0~8,255
N/A
None
Enumeration Type
None
Interval Type
0~62,255
N/A
None
Interval Type
4~5,60~255
N/A
None
Interval Type
0~8,255
N/A
None
Enumeration Type
None
Interval Type
-100~300
N/A
0.1degree
Interval Type
0~10
N/A
0.1degree
None
0~49 characters
N/A
None
Interval Type
1~2
N/A
None
Interval Type
0~35
N/A
None
0~2 characters
N/A
None
0~36 characters
N/A
None
0~49 characters
N/A
None
Interval Type
0~62
N/A
None
Interval Type
4~5,60~254
N/A
None
Interval Type
0~8
N/A
None
Enumeration Type
None
Interval Type
None
None
0~2 characters
N/A
None
None
0~36 characters
N/A
None
0~19 characters
N/A
None
0~127 characters
N/A
None
0~19 characters
N/A
None
Enumeration Type
None
None
Enumeration Type
None
Interval Type
0~35
N/A
None
Interval Type
1~2
N/A
None
Interval Type
0~359
N/A
degree
0~32 characters
N/A
None
Interval Type
0~359
N/A
degree
Interval Type
0~359
N/A
degree
Interval Type
0~359
N/A
degree
Interval Type
0~359
N/A
degree
Interval Type
0~255
N/A
0.1dBi
Interval Type
0~255
N/A
0.1dBi
Interval Type
0~255
N/A
0.1dBi
Interval Type
0~255
N/A
0.1dBi
0~6 characters
N/A
None
Interval Type
-100~300
N/A
0.1degree
0~5 characters
N/A
None
Enumeration Type
Enumeration Type
Enumeration Type
Enumeration Type
0~32 characters
N/A
None
0~17 characters
N/A
None
0~15 characters
N/A
None
Interval Type
0~4294967295
N/A
0.25dB
Interval Type
0~4294967295 UNSUPPORT(UNS UPPORT), SUPPORT_BYPAS S(SUPPORT_BYP ASS), SUPPORT_VSWR( SUPPORT_VSWR) , VSWR/BYPASS(V SWR/BYPASS), NULL(NULL) 0~255 UNUSED(UNUSED ), BandI(BandI), BandII(BandII), BandIII(BandIII), BandIV(BandIV), BandV(BandV), BandVI(BandVI), BandVII(BandVII), BandVIII(BandVIII), BandIX(BandIX), BandX(BandX), NULL(NULL) UNUSED(UNUSED ), BandI(BandI), BandII(BandII), BandIII(BandIII), BandIV(BandIV), BandV(BandV), BandVI(BandVI), BandVII(BandVII), BandVIII(BandVIII), BandIX(BandIX), BandX(BandX), NULL(NULL) UNUSED(UNUSED ), BandI(BandI), BandII(BandII), BandIII(BandIII), BandIV(BandIV), BandV(BandV), BandVI(BandVI), BandVII(BandVII), BandVIII(BandVIII), BandIX(BandIX), BandX(BandX), NULL(NULL)
N/A
0.25dB
None
Enumeration Type
UNSUPPORT~0, SUPPORT_BYPAS S~1, SUPPORT_VSWR None ~2, VSWR/BYPASS~3, NULL~4294967295
None
Interval Type
N/A
0.25dB
None
Enumeration Type
UNUSED~0, BandI~1, BandII~2, BandIII~3, BandIV~4, BandV~5, BandVI~6, None BandVII~7, BandVIII~8, BandIX~9, BandX~10, NULL~4294967295 UNUSED~0, BandI~1, BandII~2, BandIII~3, BandIV~4, BandV~5, BandVI~6, None BandVII~7, BandVIII~8, BandIX~9, BandX~10, NULL~4294967295 UNUSED~0, BandI~1, BandII~2, BandIII~3, BandIV~4, BandV~5, BandVI~6, None BandVII~7, BandVIII~8, BandIX~9, BandX~10, NULL~4294967295
None
Enumeration Type
None
Enumeration Type
None
Enumeration Type
UNUSED(UNUSED ), BandI(BandI), BandII(BandII), BandIII(BandIII), BandIV(BandIV), BandV(BandV), BandVI(BandVI), BandVII(BandVII), BandVIII(BandVIII), BandIX(BandIX), BandX(BandX), NULL(NULL)
UNUSED~0, BandI~1, BandII~2, BandIII~3, BandIV~4, BandV~5, BandVI~6, None BandVII~7, BandVIII~8, BandIX~9, BandX~10, NULL~4294967295
None
Interval Type
0~359
N/A
degree
None
Interval Type
0~359
N/A
degree
None
Interval Type
0~359
N/A
degree
None
Interval Type
0~359
N/A
degree
None None
Interval Type Interval Type
0~255 0~255
N/A N/A
0.1dBi 0.1dBi
None None
0~255 0~255
N/A N/A
0.1dBi 0.1dBi
None
Interval Type
0~65535
N/A
None
None
Interval Type
0~65535
N/A
None
None
Interval Type
0~65535
N/A
None
None
Interval Type
0~65535
N/A
None
Remote Electrical Tilt Control Remote Electrical Tilt Control Remote Electrical Tilt Control Remote Electrical Tilt Control Remote Electrical Tilt Control
Interval Type
0~35
N/A
None
Interval Type
1~2
N/A
None
Interval Type
0~17
N/A
None
Interval Type
0~4294967295
N/A
0.25dB
Enumeration Type
NORMAL(NORMAL NORMAL~0, ), BYPASS~1, None BYPASS(BYPASS), NULL~4294967295 NULL(NULL)
Enumeration Type
AVAILABLE(AVAIL ABLE), AVAILABLE~0, UNAVAILABLE(UN UNAVAILABLE~1, AVAILABLE), BREAKLINK~2 BREAKLINK(BREA KLINK) R0A(R0A), R0B(R0B), R0C(R0C), R0D(R0D), R0E(R0E), R0F(R0F), R0G(R0G), R0H(R0H)
None
Enumeration Type
None
Interval Type
0~62,255
N/A
None
Interval Type
0~8,255
N/A
None
Interval Type
4~5,60~255
N/A
None
Interval Type
0~255
N/A
0.25dB
Enumeration Type
NORMAL(NORMAL NORMAL~0, ), BYPASS~1 BYPASS(BYPASS)
None
None
Interval Type
0~62
N/A
None
None
Interval Type
60~254
N/A
None
None
Interval Type
0 N/A
None
None
Enumeration Type
R0A(R0A), R0B(R0B), R1A(R1A), R1B(R1B), R2A(R2A), R2B(R2B), R3A(R3A), R3B(R3B), R4A(R4A), R4B(R4B), R5A(R5A), R5B(R5B), R6A(R6A), R6B(R6B), R7A(R7A), R7B(R7B), NULL(NULL) 60~254
R0A~0, R0B~1, R1A~16, R1B~17, R2A~32, R2B~33, R3A~48, R3B~49, R4A~64, R4B~65, R5A~80, R5B~81, R6A~96, R6B~97, R7A~112, R7B~113, NULL~255
None
None
Interval Type
N/A
None
None
Interval Type
0~62
N/A
None
None
Interval Type
60~254
N/A
None
None
Interval Type
0 N/A
None
None
0~64 characters
N/A
None
None
Interval Type
8 N/A
None
None
Interval Type
0~62
N/A
None
None
Enumeration Type
R0A(R0A), R0B(R0B), R1A(R1A), R1B(R1B), R2A(R2A), R2B(R2B), R3A(R3A), R3B(R3B), R4A(R4A), R4B(R4B), R5A(R5A), R5B(R5B), R6A(R6A), R6B(R6B), R7A(R7A), R7B(R7B), NULL(NULL)
None
None
Enumeration Type
R0A(R0A), R0B(R0B), R1A(R1A), R1B(R1B), R2A(R2A), R2B(R2B), R3A(R3A), R3B(R3B), R4A(R4A), R4B(R4B), R5A(R5A), R5B(R5B), R6A(R6A), R6B(R6B), R7A(R7A), R7B(R7B), NULL(NULL)
None
None
0~64 characters
N/A
None
None
Interval Type
60~254
N/A
None
None
Enumeration Type
NEGATIVE_45, POSITIVE_45, HORIZONTAL, VERTICAL, LEFT, RIGHT, POSITIVE_NEGATI VE_45
NEGATIVE_45~0, POSITIVE_45~1, HORIZONTAL~2, VERTICAL~3, None LEFT~4, RIGHT~5, POSITIVE_NEGATI VE_45~6
None
Interval Type
0 N/A
None
None
Interval Type
60~254
N/A
None
None
Interval Type
1~8
N/A
None
None
Enumeration Type
R0A(R0A), R0B(R0B), R1A(R1A), R1B(R1B), R2A(R2A), R2B(R2B), R3A(R3A), R3B(R3B), R4A(R4A), R4B(R4B), R5A(R5A), R5B(R5B), R6A(R6A), R6B(R6B), R7A(R7A), R7B(R7B), NULL(NULL) NEGATIVE_45, POSITIVE_45, HORIZONTAL, VERTICAL, LEFT, RIGHT, POSITIVE_NEGATI VE_45
None
None
Enumeration Type
NEGATIVE_45~0, POSITIVE_45~1, HORIZONTAL~2, VERTICAL~3, None LEFT~4, RIGHT~5, POSITIVE_NEGATI VE_45~6
None
Interval Type
-150~150,32767
N/A
0.1degree
None
Interval Type
-150~150,32767
N/A
0.1degree
None
Enumeration Type
R0A(R0A), R0B(R0B), R1A(R1A), R1B(R1B), R2A(R2A), R2B(R2B), R3A(R3A), R3B(R3B), R4A(R4A), R4B(R4B), R5A(R5A), R5B(R5B), R6A(R6A), R6B(R6B), R7A(R7A), R7B(R7B), NULL(NULL) NEGATIVE_45, POSITIVE_45, HORIZONTAL, VERTICAL, LEFT, RIGHT, POSITIVE_NEGATI VE_45 NEGATIVE_45, POSITIVE_45, HORIZONTAL, VERTICAL, LEFT, RIGHT, POSITIVE_NEGATI VE_45
None
None
Enumeration Type
NEGATIVE_45~0, POSITIVE_45~1, HORIZONTAL~2, VERTICAL~3, None LEFT~4, RIGHT~5, POSITIVE_NEGATI VE_45~6 NEGATIVE_45~0, POSITIVE_45~1, HORIZONTAL~2, VERTICAL~3, None LEFT~4, RIGHT~5, POSITIVE_NEGATI VE_45~6
None
Enumeration Type
None
Interval Type
0,1,2,4
N/A
None
None
Interval Type
0~255
N/A
None
None
Interval Type
0~7
N/A
None
None
Interval Type
0~1
N/A
None
None
Interval Type
0~7
N/A
None
None
Interval Type
0~7
N/A
None
None
Interval Type
0~1
N/A
None
None
Interval Type
0~7
N/A
None
None
Interval Type
0~4
N/A
None
None
Interval Type
0~4,8
N/A
None
None
Compound Type
2000-01-01 00:00:00~2038-12- N/A 31 23:59:59
None
None
Interval Type
0~4294967295
N/A
packet
None
Interval Type
0~65535
N/A
per mill
None
Interval Type
0~65535
N/A
per mill
None
Interval Type
0~4294967295
N/A
None
Interval Type
0~4294967295
N/A
packet
None
Interval Type
0~65535
N/A
per mill
None
Interval Type
0~65535
N/A
per mill
None
Interval Type
0~4294967295
N/A
None
Interval Type
0~4294967295
N/A
packet
None
Interval Type
0~65535
N/A
per mill
None
Interval Type
0~65535
N/A
per mill
None
Interval Type
0~4294967295
N/A
None
Interval Type
0~4294967295
N/A
packet
None
Interval Type
0~4294967295
N/A
None
Interval Type
0~4294967295
N/A
None
0~31 characters
N/A
packet
None
Interval Type
0 N/A
None
None
Interval Type
0~7
N/A
None
None
Interval Type
0~1
N/A
None
None
Interval Type
0~7
N/A
None
None
Enumeration Type
DEACTIVATED(De activated), DEACTIVATED~0, None ACTIVATED(Activat ACTIVATED~1 ed)
None
Enumeration Type
UNAVAILABLE(Un available), UNAVAILABLE~0, AVAILABLE(Availa AVAILABLE~1 ble)
None
None
Interval Type
1~4
N/A
None
None
Interval Type
0 N/A
None
None
Interval Type
0~7
N/A
None
None
Interval Type
0~1
N/A
None
None
Interval Type
0~5
N/A
None
None
Interval Type
0~7
N/A
None
None
Enumeration Type
None
Enumeration Type
None
None
Interval Type
1~4
N/A
None
None
Interval Type
0 N/A
None
None
Enumeration Type
UMTS(UMTS), GSM(GSM), UMTS~0, GSM~1, DEFAULT(DEFAUL DEFAULT~255 T)
None
None
Enumeration Type
None
Enumeration Type
None
None
Interval Type
0~1
N/A
None
None
Enumeration Type
IN(Input), OUT(Output)
IN~0, OUT~1
None
None
Interval Type
0~7
N/A
None
None
Interval Type
0~1
N/A
None
None
Interval Type
0~7
N/A
None
None
Enumeration Type
TWISTEDTWISTED-PAIR~0, PAIR(Twisted-Pair), None COAXIAL~1 COAXIAL(Coaxial)
None
Interval Type
0~1000
N/A
None
Enumeration Type
None
Enumeration Type
None
None
Interval Type
0~100000
N/A
ns
None
Interval Type
1~4
N/A
None
None
Interval Type
0~17
N/A
None
None
Interval Type
0~7
N/A
None
RGPS CLOCK TRANSMIT FROM RRU TO BBU THROUGH CPRI
Interval Type
0~1,60~254
N/A
None
None
Interval Type
0~7
N/A
None
None
Enumeration Type
USER_CONFIG(Us er Config), SEARCH_WITH_D URATION(Search with duration), SEARCH_WITH_P RECISION(Search with precision), AUTO_SEARCH(A uto Search)
USER_CONFIG~0, SEARCH_WITH_D URATION~1, None SEARCH_WITH_P RECISION~2, AUTO_SEARCH~3
None
Interval Type
180000000~180000 N/A 000
1e-6 degree
None
Interval Type
90000000~9000000 N/A 0
1e-6 degree
None
Interval Type
-1000~10000
N/A
None
Interval Type
0~89
N/A
degree
None
Interval Type
0~100000
N/A
ns
None
Interval Type
1~2880
N/A
min
None
Interval Type
1~100
N/A
None
Enumeration Type
TWISTEDTWISTED-PAIR~0, PAIR(Twisted-Pair), None COAXIAL~1 COAXIAL(Coaxial)
None
Interval Type
0~1000
N/A
None
1~63 characters
N/A
None
None
Enumeration Type
Lock(Yes), Unlock(No)
Lock~0, Unlock~1
None
None
Enumeration Type
Valid(Valid), Invalid(Invalid)
Valid~0, Invalid~1
None
None
Enumeration Type
Valid~0, Invalid~1
None
None
Enumeration Type
NotFixed(Not NotFixed~0, Fixed), Fixed(Fixed) Fixed~1
None
None
Enumeration Type
Enabled(Enabled), Enabled~0, Disabled(Disabled) Disabled~1
None
None
Enumeration Type
Valid~0, Invalid~1
None
None
Interval Type
0~100
N/A
None
None
Enumeration Type
NOTEXIST(Inexiste nt), ANTENNASHORTE D(Antenna Shorted), ANTENNAOPENE D(Antenna Opened), SELF_CHECK_FAI LURE(Self-check Failure), COMEXCEPTION( COM Port Communication Fault), NORMAL(Normal), UNKNOWN(Unkno wn Exception), USCUINVALID(US CU Invalid), UNKNOWN_STAR _CARD(Unknown Star Card)
NOTEXIST~0, ANTENNASHORTE D~1, ANTENNAOPENE D~2, SELF_CHECK_FAI LURE~3, None COMEXCEPTION~ 4, NORMAL~5, UNKNOWN~6, USCUINVALID~7, UNKNOWN_STAR _CARD~8
None
Enumeration Type
M12M(M12M), UT(UT), RT(RT), JPS15L(JPS15L), K161(K161), GG16(GG16), JNS100(JNS100), RGPS(RGPS), CWAIN(CWAIN), RTSMT(RTSMT), UBLOX5(UBLOX5), BD7702(BD7702), NAVIOR(NAVIOR), PPSTOD(PPSTOD) , M1000(M1000), TRGPS(TRGPS), BD7702CMS(BD77 02CMS), OEM4(OEM4), UNKNOWN(Unkno wn)
M12M~0, UT~1, RT~2, JPS15L~3, K161~4, GG16~5, JNS100~6, RGPS~7, CWAIN~8, RTSMT~9, UBLOX5~10, None BD7702~11, NAVIOR~12, PPSTOD~13, M1000~14, TRGPS~15, BD7702CMS~16, OEM4~17, UNKNOWN~65535
None
Interval Type
0~100
N/A
None
None
Enumeration Type
GPS(GPS), GLONASS(GLONA SS), GPS/GLONASS(G PS/GLONASS with GPS Prioritized), COMPASS(COMP ASS), COMPASS/GPS(C OMPASS/GPS with COMPASS Prioritized), GPS/COMPASS(G PS/COMPASS with GPS Prioritized)
GPS~0, GLONASS~1, GPS/GLONASS~2, None COMPASS~3, COMPASS/GPS~4, GPS/COMPASS~5
None
Interval Type
0~100
N/A
None
None
Enumeration Type
None
Interval Type
1~4
N/A
None
None
Interval Type
0~1
N/A
None
IEEE1588 V2 Clock Synchronization Enumeration Type Clock over IP (Huawei proprietary)
HW_DEFINED(Hua Wei Defined HW_DEFINED~0, Protocol), PTP(PTP PTP~1 Protocol)
None
None
Interval Type
0~7
N/A
None
None
Interval Type
0~1
N/A
None
None
Interval Type
0~7
N/A
None
IEEE1588 V2 Clock Synchronization IP Address Type Clock over IP (Huawei proprietary)
Valid IP address
N/A
None
IEEE1588 V2 Clock Synchronization IP Address Type Clock over IP (Huawei proprietary)
Valid IP address
N/A
None
IEEE1588 V2 Clock Interval Type Synchronization
0~127
N/A
None
None
Enumeration Type
E2E(E2E), P2P(P2P)
E2E~0, P2P~1
None
None
Enumeration Type
OFF(OFF), ON(ON) OFF~0, ON~1
None
None
Interval Type
0~255
N/A
None
None
Interval Type
0~255
N/A
None
None
Interval Type
0~255
N/A
None
None
Interval Type
0~255
N/A
None
None
Interval Type
0~4294967295
N/A
None
None
Enumeration Type
NO(NO), YES(YES) NO~0, YES~1
None
None
Compound Type
14 characters
N/A
None
None
Enumeration Type
None
Enumeration Type
None
IEEE1588 V2 Clock Enumeration Type Synchronization
UNICAST(Unicast), UNICAST~0, L2_MULTICAST(L2 None L2_MULTICAST~2 Multicast)
IEEE1588 V2 Clock Interval Type Synchronization
-100000~100000
N/A
ns
None
Enumeration Type
ONE_STEP(One Step), TWO_STEP(Two Step) 0~4094
ONE_STEP~0, TWO_STEP~1
None
None
Interval Type
N/A
None
None
Interval Type
2147483648~21474 N/A 83647
None
None
Interval Type
1~4
N/A
None
None
Enumeration Type
1/16(1/16), 1/8(1/8), 1/16~0, 1/8~1, 1/4(1/4), 1/2(1/2), 1/4~2, 1/2~3, 1.0~4, Hz 1.0(1.0), 2.0(2.0), 2.0~5, 4.0~6, 8.0~7 4.0(4.0), 8.0(8.0)
None
Enumeration Type
1/2(1/2), 1.0(1.0), 2.0(2.0), 4.0(4.0), 8.0(8.0), 16.0(16.0), 32.0(32.0), 64.0(64.0), 128.0(128.0)
1/2~0, 1.0~1, 2.0~2, 4.0~3, 8.0~4, Hz 16.0~5, 32.0~6, 64.0~7, 128.0~8
None
Interval Type
0~255
N/A
None
None
Enumeration Type
1588V2(1588V2), 1588V2~0, G.8265.1(G.8265.1) G.8265.1~1
None
None
Interval Type
60~1000
N/A
None
Enumeration Type
IPV4(IPv4), IPV6(IPv6)
IPV4~0, IPV6~1
None
None
IP Address Type
Valid IP address
N/A
None
None
IP Address Type
Valid IP address
N/A
None
None
Interval Type
0 N/A
None
None
Interval Type
0~7
N/A
None
None
Interval Type
0~1
N/A
None
None
Interval Type
0~7
N/A
None
None
Interval Type
0~5
N/A
None
None
Enumeration Type
DISABLE(DISABLE DISABLE~0, ), ENABLE~1 ENABLE(ENABLE)
None
Synchronization with Ethernet(ITU-T Enumeration Type G.8261)
Synchronization with Ethernet(ITU-T Enumeration Type G.8261)
None
None
Interval Type
1~4
N/A
None
None
Enumeration Type
AVAILABLE(Availa ble), UNAVAILABLE(Un available), UNSUPPORT(Unsu pport), PARTAVAILABLE( Partial Available)
AVAILABLE~0, UNAVAILABLE~1, UNSUPPORT~2, None PARTAVAILABLE~ 3
None
Enumeration Type
FORBID(Forbid), ALLOW(Allow), NA(N/A)
FORBID~0, ALLOW~1, NA~2
None
None
Interval Type
1~4
N/A
None
None
Enumeration Type
0(0), 1(1), 2(2), 3(3), 4(4), 5(5), 6(6), 7(7), 8(8), 9(9), 10(10), 11(11), 12(12), 13(13), 14(14), 15(15), 16(16), 17(17), AUTO(AUTO)
0~0, 1~1, 2~2, 3~3, 4~4, 5~5, 6~6, 7~7, 8~8, 9~9, 10~10, 11~11, 12~12, None 13~13, 14~14, 15~15, 16~16, 17~17, AUTO~65535
None
Enumeration Type
GPS(GPS Clock), BITS(BITS Clock), IPCLK(IP Clock), SYNCETH(SyncEth Clock), LINECLK(Line Clock), TOD(TOD Clock), PEERCLK(Peer Clock), SYNCETH+IPCLK( SyncEth Clock+IP Clock), GPS+SYNCETH(G PS Clock+SyncEth Clock)
GPS~0, BITS~1, IPCLK~2, SYNCETH~3, LINECLK~4, TOD~5, None PEERCLK~6, SYNCETH+IPCLK~ 7, GPS+SYNCETH~8
Clock Source Switching Manually Enumeration Type or Automatically
AUTO(Auto), AUTO~0, MANUAL(Manual), MANUAL~1, FREE(Free) FREE~2
None
None
Enumeration Type
FREQ(FREQ), TIME(TIME)
FREQ~0, TIME~1
None
None
Enumeration Type
NORMAL(Normal), LOST(Lost), UNAVAILABLE(Un available), FREDVAT(Frequen cy Deviation), JITTER(Jitter), PHASEOUTSCOP E(Phaseoutscope), UNKNOWN(Unkno wn), DIFFSRC(Inconsist ent Clock References) FREERUNNING(Fr ee running), FASTTRACKING(F ast tracking), LOCKED(Locked), HOLDOVER(Holdo ver), UNKNOWN(Unkno wn) GPS(GPS Clock), BITS(BITS Clock), IPCLK(IP Clock), SYNCETH(SyncEth Clock), LINECLK(Line Clock), TOD(TOD Clock), PEERCLK(Peer Clock), SYNCETH+IPCLK( SyncEth Clock+IP Clock), GPS+SYNCETH(G PS Clock+SyncEth Clock)
NORMAL~0, LOST~1, UNAVAILABLE~2, FREDVAT~3, JITTER~4, None PHASEOUTSCOP E~5, UNKNOWN~6, DIFFSRC~7
None
Enumeration Type
FREERUNNING~0, FASTTRACKING~1 , LOCKED~2, None HOLDOVER~3, UNKNOWN~4
None
Enumeration Type
GPS~0, BITS~1, IPCLK~2, SYNCETH~3, LINECLK~4, TOD~5, None PEERCLK~6, SYNCETH+IPCLK~ 7, GPS+SYNCETH~8
None
Interval Type
0~7
N/A
None
None
Interval Type
0~1
N/A
None
None
Interval Type
0~7
N/A
None
None
Enumeration Type
QL-PRC(QL-PRC), QL-SSU-A(QL-SSUQL-PRC~2, QLA), QL-SSU-B(QLSSU-A~4, QL-SSUSSU-B), QLB~8, QL-EEC2~10, None EEC2(QL-EEC2), QL-EEC1~11, QLQL-EEC1(QLDNU~15 EEC1), QL-DNU(QLDNU)
None
Interval Type
0~7
N/A
None
None
Interval Type
0~1
N/A
None
None
Interval Type
0~5
N/A
None
None
Enumeration Type
LBBP(LBBP)
LBBP~12290
None
None
Enumeration Type
FDD(Frequency Division Duplex), TDD(Time Division Duplex), TDD_ENHANCE(S upport TDD BF), TDD_8T8R(TDD_8 T8R), TDD_TL(TDD_TL)
FDD~0, TDD~1, TDD_ENHANCE~3, None TDD_8T8R~4, TDD_TL~5
None
Enumeration Type
LOCKED(Locked), LOCKED~0, UNLOCKED(Unlock UNLOCKED~1 ed)
None
None
Interval Type
0~4294967295
N/A
None
Enumeration Type
IMMEDIATE(Immed IMMEDIATE~0, iate), DELAY(Delay) DELAY~2
None
None
Enumeration Type
Alarm_0(Normal), Alarm_1(Warning), Alarm_2(Minor), Alarm_3(Minor), Alarm_4(Major), Alarm_5(Major), Alarm_6(Major), Alarm_7(Major), Alarm_8(Critical), Alarm_9(Critical), Alarm_10(Critical), Alarm_11(Critical), Alarm_12(Critical), Alarm_13(Critical), Alarm_14(Critical), Alarm_15(Critical)
Alarm_0~0, Alarm_1~1, Alarm_2~2, Alarm_3~3, Alarm_4~4, Alarm_5~5, Alarm_6~6, Alarm_7~7, Alarm_8~8, Alarm_9~9, Alarm_10~10, Alarm_11~11, Alarm_12~12, Alarm_13~13, Alarm_14~14, Alarm_15~15
None
None
Enumeration Type
None
None
Enumeration Type
Avail_0(Normal), Avail_1(Fault), Avail_20(In test), Avail_21(Fault, In test), Avail_500(Starting up), Avail_501(Starting up, Fault), Avail_504(Unconfig ured), Avail_508(Inconsist ent), Avail_509(Inconsist ent, Fault), Avail_520(Starting up,In test), Avail_521(Starting up, Fault, In test), Avail_524(Unconfig ured,In test), Avail_528(Inconsist ent,In test), Avail_529(Inconsist ent, Fault, In test), Avail_800(Communi cation lost), Avail_801(Fault, Communication lost), Avail_820(Communi cation lost, In test), Avail_821(Fault, Communication
Avail_0~0, Avail_1~1, Avail_20~32, Avail_21~33, Avail_500~1280, Avail_501~1281, Avail_504~1284, Avail_508~1288, Avail_509~1289, Avail_520~1312, Avail_521~1313, Avail_524~1316, Avail_528~1320, Avail_529~1321, Avail_800~2048, Avail_801~2049, Avail_820~2080, Avail_821~2081, Avail_c10~3088, Avail_c11~3089, Avail_c12~3090, Avail_c13~3091, Avail_c14~3092, Avail_c30~3120, Avail_c31~3121, Avail_c32~3122, Avail_c33~3123, Avail_c34~3124, Avail_d00~3328, Avail_d01~3329, Avail_d04~3332, Avail_d08~3336, Avail_d09~3337, Avail_d20~3360,
None
None
0~2047 characters
N/A
None
None None
0~31 characters 0~31 characters
N/A N/A
None None
None
0~259 characters
N/A
None
None
0~11 characters
N/A
None
None
0~23 characters
N/A
None
None
0~19 characters UMPT(UMPT), FAN(FAN), UPEU(UPEU), PMU(PMU), PSU(PSU), BAT(BAT), TCU(TCU), EMU(EMU), UTRP(UTRP), USCU(USCU), UEIU(UEIU), FMU(FMU), MRRU(MRRU), MRFU(MRFU), RHUB(RHUB), UBRI(UBRI), MRXU(MRXU), MTXU(MTXU), UCIU(UCIU), CCU(CCU), MAAU(MAAU), UNKNOWN(UNKN OWN), PRRU(PRRU), GRRU(GRRU), GRFU(GRFU), GATM(GATM), DRRU(DRRU), DRFU(DRFU), WRFU(WRFU), NGRU(NGRU), LMPT(LMPT), LBBP(LBBP), LRRU(LRRU), 0~4294967295 0~4294967295
N/A
None
None
Enumeration Type
UMPT~1, FAN~3, UPEU~4, PMU~5, PSU~6, BAT~7, TCU~8, EMU~10, UTRP~11, USCU~12, UEIU~13, FMU~14, MRRU~15, MRFU~16, RHUB~17, UBRI~20, MRXU~22, MTXU~23, UCIU~24, CCU~25, MAAU~35, UNKNOWN~254, None PRRU~271, GRRU~4111, GRFU~4112, GATM~4114, DRRU~4367, DRFU~4368, WRFU~8208, NGRU~8211, LMPT~12289, LBBP~12290, LRRU~12303, LRFU~12304, BRFU~16400, CRFU~20496, RRU~24591
None None
N/A N/A
% None
None
Enumeration Type
CPU(CPU), DSP(DSP), SLAVE_CPU(Slave CPU), MDU_CPU(MDU_C PU), MRU_CPU(MRU_C PU)
CPU~1, DSP~2, SLAVE_CPU~3, MDU_CPU~4, MRU_CPU~5
None
None
Interval Type
None None
Interval Type Character String Type
2147483648~21474 N/A 83647 2147483648~21474 N/A 83647 0~255 characters N/A
degree Celsius
degree Celsius None
None
Enumeration Type
Master(Master), NDD(NDD), NCD(NCD), NDC(NDC), NEC(NEC), EUL(EUL), EDL(EDL), Slave(Slave)
Master~0, NDD~1, NCD~2, NDC~3, NEC~4, EUL~5, EDL~6, Slave~7
None
None
Enumeration Type
CABINET(CABINE T), SUBRACK(SUBRA CK), BOARD(BOARD), SUBBOARD(SUBB OARD), SFP(SFP) 0~63 characters 0~63 characters
CABINET~0, SUBRACK~1, BOARD~2, SUBBOARD~3, SFP~4 N/A N/A
None
None None
Character String Type Character String Type Character String Type Character String Type Character String Type Enumeration Type
None None
None
0~63 characters
N/A
None
None None
0~63 characters 1~39 characters Normal(Normal), Fault(Fault), Timeout(Timeout), NULL(NULL)
N/A N/A
None None
None
Normal~0, Fault~1, Timeout~2, None NULL~4294967295
None
Interval Type
0~65535
N/A
None
None
Interval Type
0~65535
N/A
None
None
Interval Type
0~7
N/A
None
None
Interval Type
0~1
N/A
None
None
Interval Type
16 N/A
None
None
Interval Type
2147483648~21474 N/A 83647
degree Celsius
None
Interval Type
0~100
N/A
None
Enumeration Type
None
None
Enumeration Type
None
None
Enumeration Type
None
None
0~2047 characters
N/A
None
None None
N/A N/A
None None
None
0~259 characters
N/A
None
None
0~11 characters
N/A
None
None
0~23 characters
N/A
None
None
N/A
None
None
Enumeration Type
None None
N/A N/A
% None
None
Enumeration Type
None
None
Interval Type
None None
degree Celsius
degree Celsius None
None
Enumeration Type
None
None
Enumeration Type
None
None None
None None
None
0~63 characters
N/A
None
None None
N/A N/A
None None
None
None
Interval Type
0~65535
N/A
None
None
Interval Type
0~65535
N/A
None
None
Interval Type
0~62
N/A
None
None
Interval Type
15 N/A
None
None
Interval Type
0 N/A
None
None
Interval Type
0~62
N/A
None
None
Interval Type
0~1
N/A
None
None
Interval Type
0~1
N/A
None
None
Enumeration Type
NO(NO), YES(YES) NO~0, YES~1
None
None
Interval Type
1~7
N/A
None
None
Bit Field Type
GSM(GSM), UMTS(UMTS), LTE(LTE)
GSM~0, UMTS~1, LTE~2
None
None
Bit Field Type
WS_DISABLE(Wat er-Immersed WS_DISABLE~0, Sensor Disabled), SS_DISABLE~1 SS_DISABLE(Smo g Sensor Disabled)
None
None
Enumeration Type
CONNECTED(Con CONNECTED~0, nected), DISCONNECTED~ None DISCONNECTED( 1 Disconnected) CONNECTED(Con CONNECTED~0, nected), DISCONNECTED~ None DISCONNECTED( 1 Disconnected) 0~4294967295 0~4294967295 N/A N/A None None
None
Enumeration Type
None None
None
Interval Type
0~4294967295
N/A
None
None
Interval Type
0~249 LBR0(NULL), LBR1(1.25), LBR2(2.5), LBR3(3.0), LBR4(4.9), LBR5(6.1), LBR6(9.8)
N/A
None
None
Enumeration Type
LBR0~0, LBR1~1, LBR2~2, LBR3~4, Gbit/s LBR4~8, LBR5~16, LBR6~32
None
Enumeration Type
NEGOTIATED(Neg otiated), NEGOTIATING(Ne gotiating), NOTREADY(Not ready), TIMEOUT(Timeout) , USERCONFIG(US ERCONFIG)
NEGOTIATED~0, NEGOTIATING~1, NOTREADY~2, TIMEOUT~3, USERCONFIG~5
None
None
Enumeration Type
LBR0(NULL), LBR1(1.25), LBR2(2.5), LBR3(3.0), LBR4(4.9), LBR5(6.1), LBR6(9.8)
None
Enumeration Type
NEGOTIATED(Neg otiated), NEGOTIATING(Ne gotiating), NOTREADY(Not ready), TIMEOUT(Timeout) , USERCONFIG(US ERCONFIG)
NEGOTIATED~0, NEGOTIATING~1, NOTREADY~2, TIMEOUT~3, USERCONFIG~5
None
None None None
Interval Type Interval Type Interval Type
0~62 0~254 0~7
N/A N/A N/A
None None None
None
Enumeration Type
HEAD(Head), TAIL(Tail)
HEAD~4294967294 None , TAIL~4294967295
None
Enumeration Type
LBR0(NULL), LBR1(1.25), LBR2(2.5), LBR3(3.0), LBR4(4.9), LBR5(6.1), LBR6(9.8)
None
Interval Type
0~62
N/A
None
None
Interval Type
0~1,4~5,60~254
N/A
None
None
Interval Type
0~8
N/A
None
None
Interval Type
0~5
N/A
None
None
Enumeration Type
614M(614M), 1.25G(1.25G), 2.5G(2.5G), 4.9G(4.9G), 6.1G(6.1G), 9.8G(9.8G), UNKNOWN(UNKN OWN), NULL(NULL)
614M~0, 1.25G~1, 2.5G~2, 4.9G~3, 6.1G~4, 9.8G~5, UNKNOWN~254, NULL~255
bit/s
None
Enumeration Type
LOCKED(Locked), UNLOCKED(Unlock ed), SHUTINGDOWN(S hutingdown), INVALID(NULL)
LOCKED~0, UNLOCKED~1, None SHUTINGDOWN~2 , INVALID~4
None
Enumeration Type
INPOSITION(In Position), INPOSITION~0, NOTINPOSITION(N NOTINPOSITION~ None ot In Position), 1, INVALID~255 INVALID(NULL) Slave(Slave), Master(Master), NULL(NULL)
None
Enumeration Type
Slave~0, Master~1, None NULL~255
None
Enumeration Type
SFP_OPTICAL(SF P_OPTICAL), ESFP_OPTICAL(E SFP_OPTICAL), SFP_ELECTRIC(S FP_ELECTRIC), SCSI_ELECTRIC(S CSI_ELECTRIC), GE(GE), UNKNOWN(UNKN OWN), NULL(NULL) 0~4294967295
SFP_OPTICAL~0, ESFP_OPTICAL~1, SFP_ELECTRIC~2, SCSI_ELECTRIC~3 None , GE~4, UNKNOWN~254, NULL~255
None
Interval Type
N/A
None
None
Interval Type
0~4294967295
N/A
None
None
Interval Type
0~4294967295
N/A
None
None
Interval Type
0~4294967295
N/A
None
None
Interval Type
0~4294967295 CPRI_MUX(CPRI MUX), NORMAL(Normal), UNKNOWN(Unkno wn), NULL(NULL) DC(DC), AC(AC)
N/A
None
None
Enumeration Type
CPRI_MUX~0, NORMAL~253, UNKNOWN~254, NULL~255
None
None
Enumeration Type
DC~0, AC~1
None
None
Interval Type
0~7
N/A
None
None
Interval Type
0~1
N/A
None
None
Interval Type
6~7 UMPT(UMPT), LMPT(LMPT)
N/A UMPT~1, LMPT~12289
None
None
Enumeration Type
None
None
Enumeration Type
Unknown(Unknown) Unknown~0, , NULL(NULL), NULL~1, Active~2, None Active(Active), Standby~3 Standby(Standby)
None
Enumeration Type
None
None
Enumeration Type
None
None
Enumeration Type
None
None
0~2047 characters
N/A
None
None None
N/A N/A
None None
None
0~259 characters
N/A
None
None
0~11 characters
N/A
None
None
0~23 characters
N/A
None
None
N/A
None
None
Enumeration Type
None None
N/A N/A
% None
None
Enumeration Type
None
None
Interval Type
None None
degree Celsius
degree Celsius None
None
Enumeration Type
None
None
Enumeration Type
None
None None
None None
None
0~63 characters
N/A
None
None None
N/A N/A
None None
None
None
Interval Type
0~65535
N/A
None
None
Interval Type
0~65535
N/A
None
None
Interval Type
0~7
N/A
None
None
Interval Type
0~1
N/A
None
None
Interval Type
18~19
N/A
None
None None
Enumeration Type Enumeration Type
NULL(NULL) NULL(NULL)
NULL~4294967295 W NULL~4294967295 W
None
Enumeration Type
None
None
Enumeration Type
None
None
Enumeration Type
None
None
0~2047 characters
N/A
None
None None
N/A N/A
None None
None
0~259 characters
N/A
None
None
0~11 characters
N/A
None
None
0~23 characters
N/A
None
None
N/A
None
None
Enumeration Type
None None
N/A N/A
% None
None
Enumeration Type
None
None
Interval Type
None None
degree Celsius
degree Celsius None
None
Enumeration Type
None
None
Enumeration Type
None
None None
None None
None
0~63 characters
N/A
None
None None
N/A N/A
None None
None
None
Interval Type
0~65535
N/A
None
None
Interval Type
0~65535
N/A
None
None
Enumeration Type
DISABLE(Disable), DISABLE~0, ENABLE(Enable) ENABLE~1
None
None
Interval Type
0~62
N/A
None
None
Interval Type
0~1,4~5,60~254
N/A
None
None
Interval Type
0~8
N/A
None
None
Interval Type
0~8
N/A
None
None
Enumeration Type
INPOSITION(In Position), INPOSITION~0, NOTINPOSITION(N NOTINPOSITION~ None ot In Position), 1, INVALID~255 INVALID(NULL)
None
Enumeration Type
SFP(SFP), ESFP(ESFP), SFP_ELECTRIC(S FP_ELECTRIC), QSFP(QSFP), EQSFP(QSFP_ELE CTRIC), UNKNOWN(UNKN OWN)
SFP~0, ESFP~1, SFP_ELECTRIC~2, QSFP~3, None EQSFP~4, UNKNOWN~42949 67295
None
0~15 characters
N/A
None
None
Enumeration Type
SINGLEMODE(SIN GLEMODE), MULTIMODE(MUL TIMODE), UNKNOWN(UNKN OWN) 0~65535
SINGLEMODE~0, MULTIMODE~1, None UNKNOWN~42949 67295
None
Interval Type
N/A
nm
None
Interval Type
0~255
N/A
100Mbit/s
None
Interval Type
0~255
N/A
km
None
Interval Type
0~255
N/A
100m
None
Interval Type
0~255
N/A
10m
None
Interval Type
0~255
N/A
10m
None
Interval Type
-1280~1280
N/A
0.1 degree Celsius
None
Interval Type
0~65535
N/A
100microvolt
None
Interval Type
0~65535
N/A
2microampere
None
Interval Type
0~65535
N/A
0.1microwatt
None
Interval Type
0~65535
N/A
0.1microwatt
None
Interval Type
0~255
N/A
None
Interval Type
0~7
N/A
None
None
Interval Type
0~1
N/A
None
None
Interval Type
0~6
N/A
None
None
Enumeration Type
UIEB(UIEB), UTRPc(UTRPc)
UIEB~9, UTRPc~10 None
None
Enumeration Type
Unknown(Unknown) Unknown~0, , NULL(NULL), NULL~1, Active~2, None Active(Active), Standby~3 Standby(Standby) Alarm_0(Normal), Alarm_1(Warning), Alarm_2(Minor), Alarm_3(Minor), Alarm_4(Major), Alarm_5(Major), Alarm_6(Major), Alarm_7(Major), Alarm_8(Critical), Alarm_9(Critical), Alarm_10(Critical), Alarm_11(Critical), Alarm_12(Critical), Alarm_13(Critical), Alarm_14(Critical), Alarm_15(Critical) Alarm_0~0, Alarm_1~1, Alarm_2~2, Alarm_3~3, Alarm_4~4, Alarm_5~5, Alarm_6~6, Alarm_7~7, Alarm_8~8, Alarm_9~9, Alarm_10~10, Alarm_11~11, Alarm_12~12, Alarm_13~13, Alarm_14~14, Alarm_15~15
None
Enumeration Type
None
None
Enumeration Type
None
None
Enumeration Type
None
None
0~2047 characters
N/A
None
None None
N/A N/A
None None
None
0~259 characters
N/A
None
None
0~11 characters
N/A
None
None
0~23 characters
N/A
None
None
N/A
None
None
Enumeration Type
None None
N/A N/A
% None
None
Enumeration Type
None
None
Interval Type
None None
degree Celsius
degree Celsius None
None
Enumeration Type
None
None
Enumeration Type
None
None None
None None
None
0~63 characters
N/A
None
None None
N/A N/A
None None
None
None
Interval Type
0~65535
N/A
None
None
Interval Type
0~65535
N/A
None
None
Interval Type
0~7
N/A
None
None None
0~1 0~7
N/A N/A
None None
None
Enumeration Type
None
None
Enumeration Type
None
None
Enumeration Type
None
None
0~2047 characters
N/A
None
None None
N/A N/A
None None
None
0~259 characters
N/A
None
None
0~11 characters
N/A
None
None
0~23 characters
N/A
None
None
N/A
None
None
Enumeration Type
None None
N/A N/A
% None
None
Enumeration Type
None
None
Interval Type
None None
degree Celsius
degree Celsius None
None
Enumeration Type
None
None
Enumeration Type
None
None None
None None
None
0~63 characters
N/A
None
None None
N/A N/A
None None
None
None
Interval Type
0~65535
N/A
None
None
Interval Type
0~65535
N/A
None
None
Interval Type
0~7
N/A
None
None
Interval Type
0~1
N/A
None
None
Interval Type
18~19
N/A
None
None
Enumeration Type
None
None
Enumeration Type
None
None
Enumeration Type
None
None
0~2047 characters
N/A
None
None None
N/A N/A
None None
None
0~259 characters
N/A
None
None
0~11 characters
N/A
None
None
0~23 characters
N/A
None
None
N/A
None
None
Enumeration Type
None None
N/A N/A
% None
None
Enumeration Type
None
None
Interval Type
None None
degree Celsius
degree Celsius None
None
Enumeration Type
None
None
Enumeration Type
None
None None
None None
None
0~63 characters
N/A
None
None None
N/A N/A
None None
None
None
Interval Type
0~65535
N/A
None
None
Interval Type
0~65535
N/A
None
None
Interval Type
0~7
N/A
None
None
Interval Type
0~1
N/A
None
None
Interval Type
0~5
N/A
None
None
Enumeration Type
None
None
Enumeration Type
None
None
Enumeration Type
None
None
0~2047 characters
N/A
None
None None
N/A N/A
None None
None
0~259 characters
N/A
None
None
0~11 characters
N/A
None
None
0~23 characters
N/A
None
None
N/A
None
None
Enumeration Type
None None
N/A N/A
% None
None
Enumeration Type
None
None
Interval Type
None None
degree Celsius
degree Celsius None
None
Enumeration Type
None
None
Enumeration Type
None
None None
None None
None
0~63 characters
N/A
None
None None
N/A N/A
None None
None
None
Interval Type
0~65535
N/A
None
None
Interval Type
0~65535
N/A
None
None
0~64 characters
N/A
None
None
Enumeration Type
None
None
Enumeration Type
None
None
Enumeration Type
NORMAL(NORMAL ), INSTALL(INSTALL) , EXPAND(EXPAND) , UPGRADE(UPGRA DE), TESTING(TESTIN G), ExpandStatus1(Exp andStatus1), ExpandStatus2(Exp andStatus2), ExpandStatus3(Exp andStatus3), ExpandStatus4(Exp andStatus4), ExpandStatus5(Exp andStatus5), ExpandStatus6(Exp andStatus6), ExpandStatus7(Exp andStatus7), ExpandStatus8(Exp andStatus8), ExpandStatus9(Exp andStatus9), ExpandStatus10(Ex pandStatus10)
NORMAL~0, INSTALL~1, EXPAND~2, UPGRADE~3, TESTING~4, ExpandStatus1~5, ExpandStatus2~6, ExpandStatus3~7, None ExpandStatus4~8, ExpandStatus5~9, ExpandStatus6~10, ExpandStatus7~11, ExpandStatus8~12, ExpandStatus9~13, ExpandStatus10~14
None
Compound Type
2000-0101T00:00:00+00:00 N/A ~2037-1231T23:59:59+00:00
None
None
Compound Type
2000-0101T00:00:00+00:00 N/A ~2037-1231T23:59:59+00:00
None
None
0~255 characters NORMAL(NORMAL ), INSTALL(INSTALL) , EXPAND(EXPAND) , UPGRADE(UPGRA DE), TESTING(TESTIN G), ExpandStatus1(Exp andStatus1), ExpandStatus2(Exp andStatus2), ExpandStatus3(Exp andStatus3), ExpandStatus4(Exp andStatus4), ExpandStatus5(Exp andStatus5), ExpandStatus6(Exp andStatus6), ExpandStatus7(Exp andStatus7), ExpandStatus8(Exp andStatus8), ExpandStatus9(Exp andStatus9), ExpandStatus10(Ex pandStatus10)
N/A
None
None
Enumeration Type
NORMAL~0, INSTALL~1, EXPAND~2, UPGRADE~3, TESTING~4, ExpandStatus1~5, ExpandStatus2~6, ExpandStatus3~7, None ExpandStatus4~8, ExpandStatus5~9, ExpandStatus6~10, ExpandStatus7~11, ExpandStatus8~12, ExpandStatus9~13, ExpandStatus10~14
None
Enumeration Type
None
None
Interval Type
390~480
N/A
0.1V
None
Interval Type
390~600
N/A
0.1V
None
Interval Type
0~62
N/A
None
None
Enumeration Type
APM30(APM30), TMC(TMC), BBC(BBC), PS4890(PS4890), OMB(OMB), RFC(RFC), BTS3900(BTS3900 ), BTS3900L(BTS390 0L), BTS3900AL(BTS39 00AL), VIRTUAL(Virtual Cabinet), TP48600A(TP4860 0A), ILC29(ILC29)
APM30~128, TMC~129, BBC~130, PS4890~133, OMB~134, RFC~135, BTS3900~136, BTS3900L~137, BTS3900AL~138, VIRTUAL~142, TP48600A~154, ILC29~155
None
None
0~79 characters
N/A
None
None
0~31 characters
N/A
None
None
Interval Type
0~62
N/A
None
None
Interval Type
0~254
N/A
None
None
Enumeration Type
BBU3900(BBU3900 Subrack), RFU(RFU Subrack), PMU(PMU Subrack), TCU(TCU Subrack), FMU(FMU Subrack), RRU(RRU Subrack), EMU(EMU Subrack), PICO(PICO Subrack), CCU(CCU Subrack), UNKNOW(Unknow Subrack)
BBU3900~128, RFU~129, PMU~130, TCU~131, FMU~132, RRU~134, EMU~137, PICO~147, CCU~148, UNKNOW~255
None
None
0~79 characters
N/A
None
None
Enumeration Type
AC220V(AC 220V), DC-48V(DC -48V), DC+28V(DC +28V), DC+24V(DC +24V), DC-48V-2(DC 48V), AC110V(AC 110V), RDC48V(RDC -48V), NDC-48V(NDC 48V)
AC220V~0, DC48V~1, DC+28V~2, DC+24V~3, DCNone 48V-2~4, AC110V~5, RDC48V~6, NDC-48V~7
None
Enumeration Type
None
None
Enumeration Type
None
None
Enumeration Type
None
None
0~2047 characters
N/A
None
None
0~31 characters
N/A
None
None
0~31 characters
N/A
None
None
0~259 characters
N/A
None
None
0~11 characters
N/A
None
None
0~23 characters
N/A
None
None
N/A
None
None
Enumeration Type
None None
N/A N/A
% None
None
Enumeration Type
None
None
Interval Type
None None
degree Celsius
degree Celsius None
None
Enumeration Type
None
None
Enumeration Type
None
None None
None None
None
0~63 characters
N/A
None
None None
N/A N/A
None None
None
None
Interval Type
0~65535
N/A
None
None
Interval Type
0~65535
N/A
None
None
Interval Type
0~62
N/A
None
None
Interval Type
40~59
N/A
None
None
Interval Type
0 N/A
None
Environment Monitoring
Interval Type
0~62
N/A
None
Interval Type
0~254
N/A
None
Interval Type
0~7
N/A
None
Interval Type
1~30
N/A
None
Interval Type
-20~80
N/A
degree Celsius
Interval Type
-20~80
N/A
degree Celsius
Interval Type
0~100
N/A
Interval Type
0~100
N/A
Bit Field Type
48V_DISABLE(-48 Voltage Disabled), RES0(Reserved Sensor 0), RES1(Reserved Sensor 1), RES2(Reserved Sensor 2), TS_DISABLE(Temp erature Sensor Disabled), HS_DISABLE(Humi dity Sensor Disabled)
48V_DISABLE~0, RES0~1, RES1~2, RES2~3, TS_DISABLE~4, HS_DISABLE~5
None
Bit Field Type
WS_DISABLE(Wat er -Immersed Sensor Disabled), SS_DISABLE(Smo g Sensor Disabled), IS_DISABLE(Infrare d Sensor Disabled), GS_DISABLE(Gatin g Sensor Disabled)
WS_DISABLE~0, SS_DISABLE~1, IS_DISABLE~2, GS_DISABLE~3
None
Environment Monitoring Environment Monitoring Environment Monitoring
Interval Type Interval Type Character String Type
2147483648~21474 N/A 83647 0~100 N/A
degree Celsius %
1~7 characters
N/A
None
1~7 characters
N/A
None
None
1~7 characters
N/A
None
None
1~7 characters
N/A
None
None
1~7 characters
N/A
None
None
Enumeration Type
None
None
Enumeration Type
None
None
Enumeration Type
None
None
0~2047 characters
N/A
None
None None
N/A N/A
None None
None
0~259 characters
N/A
None
None
0~11 characters
N/A
None
None
0~23 characters
N/A
None
None
0~19 characters
N/A
None
None
Enumeration Type
UMPT(UMPT), FAN(FAN), UPEU(UPEU), PMU(PMU), PSU(PSU), BAT(BAT), TCU(TCU), EMU(EMU), UTRP(UTRP), USCU(USCU), UEIU(UEIU), FMU(FMU), MRRU(MRRU), MRFU(MRFU), RHUB(RHUB), UBRI(UBRI), MRXU(MRXU), MTXU(MTXU), UCIU(UCIU), CCU(CCU), MAAU(MAAU), UNKNOWN(UNKN OWN), PRRU(PRRU), GRRU(GRRU), GRFU(GRFU), GATM(GATM), DRRU(DRRU), DRFU(DRFU), WRFU(WRFU), NGRU(NGRU), LMPT(LMPT), LBBP(LBBP), LRRU(LRRU), 0~4294967295 0~4294967295 CPU(CPU), DSP(DSP), SLAVE_CPU(Slave CPU), MDU_CPU(MDU_C PU), MRU_CPU(MRU_C PU)
None None
N/A N/A
% None
None
Enumeration Type
None
None
Interval Type
None None
degree Celsius
degree Celsius None
None
Enumeration Type
None
None
Enumeration Type
None
None None
None None
None
0~63 characters
N/A
None
None None
N/A N/A
None None
None
None
Interval Type
0~65535
N/A
None
None
Interval Type
0~65535
N/A
None
None
Interval Type
0~62
N/A
None
None
Interval Type
11~12
N/A
None
None
Interval Type
0 N/A
None
Interval Type
0~62
N/A
None
Interval Type
0~254
N/A
None
Interval Type
0~7
N/A
None
Interval Type
1~30
N/A
None
None
Bit Field Type
None
Interval Type
0~100
N/A
Environment Monitoring Environment Monitoring Environment Monitoring
Interval Type
-127~127
N/A
degree Celsius
Interval Type
-127~127
N/A
degree Celsius
Interval Type
0~4294967295
N/A
r/min
None
Enumeration Type
None
None
Enumeration Type
None
None
Enumeration Type
None
None
Enumeration Type
None
None
0~2047 characters
N/A
None
None None
N/A N/A
None None
None
0~259 characters
N/A
None
None
0~11 characters
N/A
None
None
0~23 characters
N/A
None
None
N/A
None
None
Enumeration Type
None None
N/A N/A
% None
None
Enumeration Type
None
None
Interval Type
None None
degree Celsius
degree Celsius None
None
Enumeration Type
None
None
Enumeration Type
None
None None
None None
None
0~63 characters
N/A
None
None None
N/A N/A
None None
None
None
Interval Type
0~65535
N/A
None
None
Interval Type
0~65535
N/A
None
None
Interval Type
0~62
N/A
None
None
Interval Type
8,14
N/A
None
None
Interval Type
0~3
N/A
None
Interval Type
0~62
N/A
None
Interval Type
0~254
N/A
None
Interval Type
0~7
N/A
None
Interval Type
1~30
N/A
None
Interval Type
-40~10
N/A
degree Celsius
Interval Type
20~80
N/A
degree Celsius
None
Bit Field Type
None
None Environment Monitoring Environment Monitoring Environment Monitoring
Character String Type Interval Type
0~3 characters -127~127
N/A N/A
None degree Celsius
Interval Type
-127~127
N/A
degree Celsius
Interval Type
-127~127
N/A
degree Celsius
None
Interval Type
0~4294967295
N/A
r/min
None
Interval Type
0~4294967295
N/A
r/min
None
Interval Type
0~4294967295
N/A
None None
0~4294967295 0~4294967295
N/A N/A
None None
None
Interval Type
0~4294967295
N/A
None
None
Character String Type Character String Type Character String Type
0~18 characters
N/A
None
None
0~32 characters
N/A
None
None
0~18 characters
N/A
None
None
Enumeration Type
dantherm(dantherm ), bw(b + w), huawei(huawei), airsys(air-sys), senguang(senguan g), viasystems(viasyste ms), rittal(rittal), emerson(emerson), APW(APW), hytems(hytems), hontech(hontech), agisson(agisson), pantair(pantair), Panasonic(Panason ic), Gore(Gore), Flex(Flex), Vapel(Vapel), AVC(AVC), JIAYI(JIAYI), Delta(Delta), EBM(EBM), Protechnic(Protech nic), Sanyo(Sanyo) Alarm_0(Normal), Alarm_1(Warning), Alarm_2(Minor), Alarm_3(Minor), Alarm_4(Major), Alarm_5(Major), Alarm_6(Major), Alarm_7(Major), Alarm_8(Critical), Alarm_9(Critical), Alarm_10(Critical), Alarm_11(Critical), Alarm_12(Critical), Alarm_13(Critical), Alarm_14(Critical), Alarm_15(Critical)
dantherm~0, bw~1, huawei~2, airsys~3, senguang~4, viasystems~5, rittal~6, emerson~7, APW~8, hytems~9, hontech~10, agisson~11, None pantair~12, Panasonic~13, Gore~14, Flex~15, Vapel~16, AVC~17, JIAYI~18, Delta~19, EBM~20, Protechnic~21, Sanyo~22
None
Enumeration Type
None
None
Enumeration Type
None
None
Enumeration Type
None
None
0~2047 characters
N/A
None
None None
N/A N/A
None None
None
0~259 characters
N/A
None
None
0~11 characters
N/A
None
None
0~23 characters
N/A
None
None
0~19 characters
N/A
None
None
Enumeration Type
None None
N/A N/A
% None
None
Enumeration Type
None
None
Interval Type
None None
degree Celsius
degree Celsius None
None
Enumeration Type
None
None
Enumeration Type
None
None None
None None
None
0~63 characters
N/A
None
None None
N/A N/A
None None
None
None
Interval Type
0~65535
N/A
None
None
Interval Type
0~65535
N/A
None
None
Interval Type
0~62
N/A
None
None
Interval Type
8,14
N/A
None
None
Interval Type
0~3
N/A
None
Interval Type
-99~70
N/A
degree Celsius
Interval Type
-99~70
N/A
degree Celsius
Interval Type
-99~70
N/A
degree Celsius
Interval Type
0~30
N/A
degree Celsius
Interval Type
0~30
N/A
degree Celsius
Interval Type
0~30
N/A
degree Celsius
Interval Type
0~30
N/A
degree Celsius
None
Interval Type
0~62
N/A
None
None
Interval Type
7 N/A
None
None
Interval Type
0 N/A
None
Interval Type
0~62
N/A
None
Interval Type
0~254
N/A
None
Interval Type
0~7
N/A
None
Interval Type
1~30
N/A
None
Enumeration Type
APM100(APM 100), APM200(APM 200), APM30(APM 30), EPS4890(EPS4890 ), EPS4815(EPS4815 ), SC48200(SC48200) , EPS48200(EPS482 00), TP48300A(TP4830 0A), ETP(ETP)
APM100~0, APM200~1, APM30~2, EPS4890~3, EPS4815~4, SC48200~5, EPS48200~7, TP48300A~8, ETP~10
None
Interval Type
60~300
N/A
Interval Type
60~300
N/A
Interval Type
350~556
N/A
0.1V
Interval Type
580~600
N/A
0.1V
Enumeration Type
None
Interval Type
350~556
N/A
0.1V
Interval Type
-20~20
N/A
degree Celsius
Interval Type
35~80
N/A
degree Celsius
None
Interval Type
0~50
N/A
None
Interval Type
50~100
N/A
Bit Field Type
BT1_DISABLE(Batt ery Temperature Sensor 1 Disabled), AH_DISABLE(Cabi net Humidity Sensor Disabled), AT1_DISABLE(Cab inet Temperature Sensor 1 Disabled), BT2_DISABLE(Batt ery Temperature Sensor 2 Disabled)
BT1_DISABLE~0, AH_DISABLE~1, AT1_DISABLE~2, BT2_DISABLE~3
None
Bit Field Type
WS_DISABLE(Wat er-Immersed Sensor Disabled), WS_DISABLE~0, SS_DISABLE(Smo SS_DISABLE~1, g Sensor Disabled), GS_DISABLE~2 GS_DISABLE(Gatin g Sensor Disabled)
None
Interval Type
2147483648~21474 N/A 83647
Environment Monitoring Environment Monitoring Environment Monitoring Environment Monitoring
Character String Type Character String Type Interval Type
N/A N/A
V A
2147483648~21474 N/A 83647 0~100 N/A
degree Celsius
Interval Type
Enumeration Type
PowerOn(Power on), LowVoltagePowerO ff(Low voltage power off), MasterControlPowe rOff(Master control power off), HighTemperaturePo werOff(High temperature power off), LowTemperaturePo werOff(Low temperature power off)
PowerOn~0, LowVoltagePowerO ff~1, MasterControlPowe rOff~2, None HighTemperaturePo werOff~3, LowTemperaturePo werOff~4
Enumeration Type
BoostCharging(Boo st-Charging), FloatCharging(FloatBoostCharging~0, Charging), FloatCharging~1, ForceBoostChargin ForceBoostChargin None g(ForceBoostg~2, Discharging~3, Charging), Sleeping~4 Discharging(Dischar ging), Sleeping(Sleeping)
1~7 characters
N/A
Enumeration Type
CurrentLimiting(Cur CurrentLimiting~0, rent limiting), NoCurrentLimiting~ None NoCurrentLimiting( 1 No current limiting)
Enumeration Type
PowerOn(Power on), LowVoltagePowerO ff(Low voltage power off), MasterControlPowe rOff(Master control power off), ManualPowerOff(M anual power off), HighTemperaturePo werOff(High temperature power off)
PowerOn~0, LowVoltagePowerO ff~1, MasterControlPowe None rOff~2, ManualPowerOff~3, HighTemperaturePo werOff~4
Interval Type
0~100
N/A
Interval Type
2147483648~21474 N/A 83647 CHARGE(Charging) , CHARGE~0, DISCHARGE(Disch DISCHARGE~1, arging), REC~2, END~3 REC(Recording), END(Finished)
degree Celsius
None
Enumeration Type
None
None
1~7 characters
N/A
None
1~7 characters
N/A
None
Interval Type
2147483648~21474 N/A 83647
degree Celsius
None None
0~4294967295 0~4294967295
N/A N/A
None None
None
Interval Type
0~4294967295
N/A
None
None
0~18 characters
N/A
None
None
0~32 characters
N/A
None
None
0~18 characters Huawei(Huawei Technologies Co.,Ltd.), Emerson(Emerson Network Power Co.,Ltd.), HoldluckZYT(ShenZhen Holdluck-ZYT Power Supply Technology Co.,LTD.), PowerOne(Power-One LimiTed), Kehua(Kehua Communication Power Co.,Ltd), DeltaElectronics(De lta Electronics Power(Dong guan) LTD.), EltekEnergy(Eltek Energy Technology(Dong Guan)Ltd.), Switchtec(Hangzho u Switchtec Power Systems Co.,LTD.), TycoElectronics(Tyc o Electronics (Shang hai) Co.,Ltd.), ARTESYN(Artesyn Technologies Co.,Ltd.), UNSUPPORTED(N ot Supported), SUPPORTED(Supp orted)
N/A
None
None
Enumeration Type
Huawei~0, Emerson~1, Holdluck-ZYT~2, Power-One~3, Kehua~4, DeltaElectronics~5, EltekEnergy~6, Switchtec~7, TycoElectronics~8, ARTESYN~9, None CHROMA~10, LuckyValley~11, ACBEL~12, Zippy~13, GuoyaoElectronics~ 14, DPC~15, GoldPower~16, SungrowPowerSup ply~17, Ecom~18
None
Enumeration Type
UNSUPPORTED~0 None , SUPPORTED~1
None
Enumeration Type
DISABLE(Disable), DISABLE~0, ENABLE(Enable) ENABLE~1 SUCCEEDED(Succ eeded), BRDNOTREADY(T he board is unavailable), UNSUPPORTED(T he PSU intelligent shutdown is not supported by the board), BATNOTEXIST(Th e battery does not exist), INTERNALERR(Int ernal error)
None
None
Enumeration Type
SUCCEEDED~0, BRDNOTREADY~1 , None UNSUPPORTED~2 , BATNOTEXIST~3, INTERNALERR~4
None
Interval Type
0~65535
N/A
min
None
Interval Type
0~4294967295
N/A
None
Interval Type
0~4294967295
N/A
None
Enumeration Type
UNSUPPORTED(N ot Supported), UNSUPPORTED~0 None SUPPORTED(Supp , SUPPORTED~1 orted) DISABLE(Disable), DISABLE~0, ENABLE(Enable) ENABLE~1
None
Enumeration Type
None
None
Enumeration Type
None
None
Enumeration Type
None
None
Enumeration Type
None
None
0~2047 characters
N/A
None
None None
N/A N/A
None None
None
0~259 characters
N/A
None
None
0~11 characters
N/A
None
None
0~23 characters
N/A
None
None
N/A
None
None
Enumeration Type
None None
N/A N/A
% None
None
Enumeration Type
None
None
Interval Type
None None
degree Celsius
degree Celsius None
None
Enumeration Type
None
None
Enumeration Type
None
None None
None None
None
0~63 characters
N/A
None
None None
N/A N/A
None None
None
None
Interval Type
0~65535
N/A
None
None
Interval Type
0~65535
N/A
None
None
Interval Type
0~62
N/A
None
None
Interval Type
7 N/A
None
None
Interval Type
0 N/A
None
None
Enumeration Type
None
None
Interval Type
1~1000
N/A
0.1kVA
None
Character String Type Character String Type Interval Type
1~7 characters
N/A
cm
None
1~7 characters
N/A
None
0~4294967295
N/A
None
Interval Type
0~62
N/A
None
None
Interval Type
7 N/A
None
None
Interval Type
0 N/A
None
None
Enumeration Type
INNER(Inner), OUTER(Outer)
INNER~0, OUTER~1
None
None
Interval Type
30~240
N/A
day
None
Interval Type
433~576
N/A
0.1V
None
Interval Type
5~5000
N/A
Ah
None
Interval Type
5~25
N/A
0.01
None
Interval Type
432~575
N/A
0.1V
None
Enumeration Type
None
None
Interval Type
40~70
N/A
degree Celsius
None
Enumeration Type
None
None
Interval Type
350~556
N/A
0.1V
None
Interval Type
0~500
N/A
mV/degree Celsius
None
Interval Type
-20~20
N/A
degree Celsius
None
Interval Type
35~80
N/A
degree Celsius
None
Interval Type
1~2
N/A
None
None
Enumeration Type
VRLA_BAT(VRLA VRLA_BAT~2, Battery), LI_BAT(LiLI_BAT~3 Ion Battery)
None
None
Interval Type
0~4294967295
N/A
None
None
Interval Type
0~4294967295
N/A
None
None
Interval Type
0~4294967295
N/A
None
None
Interval Type
0~4294967295
N/A
None
None
Interval Type
0~4294967295
N/A
None
None
Interval Type
0~4294967295
N/A
None
None
Interval Type
0~4294967295
N/A
None
None
Interval Type
0~4294967295
N/A
None
None
Interval Type
0~4294967295
N/A
None
None
Interval Type
0~4294967295
N/A
None
None
Interval Type
0~4294967295
N/A
None
None
Interval Type
0~4294967295
N/A
None
None
Interval Type
0~4294967295
N/A
None
None
Interval Type
0~4294967295
N/A
None
None
Interval Type
0~4294967295
N/A
None
None
Interval Type
0~4294967295
N/A
None
None
Interval Type
0~4294967295
N/A
None
None
Interval Type
0~4294967295
N/A
None
None
Interval Type
0~4294967295
N/A
None
None
Interval Type
0~4294967295
N/A
None
None
Interval Type
0~4294967295
N/A
None
None
Compound Type
2000-01-01~209912-31
N/A
None
None
Interval Type
5~5000
N/A
Ah
None
Interval Type
0~62
N/A
None
None
Interval Type
7 N/A
None
None
Interval Type
0 N/A
None
None
Interval Type
1~5000
N/A
0.01h
None
Interval Type
1~5000
N/A
0.01h
None
Interval Type
1~5000
N/A
0.01h
None
Interval Type
1~5000
N/A
0.01h
None
Interval Type
1~5000
N/A
0.01h
None
Interval Type
1~5000
N/A
0.01h
None
Interval Type
1~5000
N/A
0.01h
None
Interval Type
1~5000
N/A
0.01h
None
Interval Type
1~5000
N/A
0.01h
None
Interval Type
1~5000
N/A
0.01h
None
Interval Type
80~100
N/A
None
Interval Type
170~220
N/A
0.01V/cell
None
Interval Type
1~50
N/A
None
None
Interval Type
1~100
N/A
None
Interval Type
1~240
N/A
min
None
Interval Type
400~540
N/A
0.1V
None
Enumeration Type
NOAUTOTEST(No Auto Test), PERIOD(Period Auto Test), POWERCUT(Powe r Off Auto Test), PERIODPOWERC UT(Period and Power Off Auto Test)
NOAUTOTEST~0, PERIOD~1, POWERCUT~2, None PERIODPOWERC UT~3
None
Interval Type
30~240
N/A
day
None
Interval Type
1~60
N/A
day
None
Enumeration Type
STANDARD(Stand ard Test), SIMPLE(Simple Test), TIMER(Period Test), PWROFF(Power Cut Test), NONE(None Test)
STANDARD~0, SIMPLE~1, TIMER~2, PWROFF~3, NONE~4
None
None
Compound Type
2000-01-01 00:00:00~2038-12- N/A 31 23:59:59 BelowEndVol(Lower Than End Voltage), OverTime(Test Timeout), CurrRecover(Power Resume Stop Power Drop Auto Test), ManualEnd(Manual Stop Test), AlmEnd(Alarm Stop Test)
None
None
Enumeration Type
BelowEndVol~0, OverTime~1, CurrRecover~2, ManualEnd~3, AlmEnd~4
None
None
Enumeration Type
None(No result), Normal(Battery normal), None~0, Normal~1, None PreAlm(Battery pre- PreAlm~2, Alm~3 alarm), Alm(Battery alarm)
None
Interval Type
0~100
N/A
None
1~7 characters
N/A
None
1~7 characters
N/A
None
1~7 characters
N/A
None
Interval Type
0~4294967295
N/A
Ah
None
Interval Type
2147483648~21474 N/A 83647 0~62 N/A
degree Celsius
None
Interval Type
None
None
Interval Type
7 N/A
None
None
Interval Type
1~7
N/A
None
None
Enumeration Type
NORMAL(Normal), COMMUNICATEFA ILED(Communicatio n failed), SHUTDOWN(Shut down), FAULT(Fault), PROTECT(Fault), UNCONFIGURED( Unconfigured), ILLEGAL(Unconfigu red) 0~18 characters
NORMAL~0, COMMUNICATEFA ILED~1, SHUTDOWN~2, None FAULT~3, PROTECT~4, UNCONFIGURED~ 5, ILLEGAL~6
None
N/A
None
None
Enumeration Type
Huawei(Huawei Technologies Co.,Ltd.), Emerson(Emerson Network Power Co.,Ltd.), HoldluckZYT(ShenZhen Holdluck-ZYT Power Supply Technology Co.,LTD.), PowerOne(Power-One LimiTed), Kehua(Kehua Communication Power Co.,Ltd), DeltaElectronics(De lta Electronics Power(Dong guan) LTD.), EltekEnergy(Eltek Energy Technology(Dong Guan)Ltd.), Switchtec(Hangzho u Switchtec Power Systems Co.,LTD.), TycoElectronics(Tyc o Electronics (Shang hai) Co.,Ltd.), ARTESYN(Artesyn Technologies Co.,Ltd.), 0~4294967295
Huawei~0, Emerson~1, Holdluck-ZYT~2, Power-One~3, Kehua~4, DeltaElectronics~5, EltekEnergy~6, Switchtec~7, TycoElectronics~8, ARTESYN~9, None CHROMA~10, LuckyValley~11, ACBEL~12, Zippy~13, GuoyaoElectronics~ 14, DPC~15, GoldPower~16, SungrowPowerSup ply~17, Ecom~18
None
Interval Type
N/A
None
None
Interval Type
0~4294967295
N/A
None
None
0~18 characters
N/A
None
None
Enumeration Type
None
None
Enumeration Type
None
None
Enumeration Type
None
None
0~2047 characters
N/A
None
None None
N/A N/A
None None
None
0~259 characters
N/A
None
None
0~11 characters
N/A
None
None
0~23 characters
N/A
None
None
N/A
None
None
Enumeration Type
None None
N/A N/A
% None
None
Enumeration Type
None
None
Interval Type
None None
degree Celsius
degree Celsius None
None
Enumeration Type
None
None
Enumeration Type
None
None None
None None
None
0~63 characters
N/A
None
None None
N/A N/A
None None
None
None
Interval Type
0~65535
N/A
None
None
Interval Type
0~65535
N/A
None
None
Interval Type
0~62
N/A
None
None
Interval Type
40~59
N/A
None
None
Interval Type
0 N/A
None
None
Interval Type
0~5
N/A
None
0~50 characters
N/A
None
Enumeration Type
OFF(Off), ON(On)
OFF~0, ON~1
None
None
Interval Type
0~62
N/A
None
None
Interval Type
0~1,7~8,11~12,14~ N/A 15,40~254
None
None
Interval Type
0~3,18~19
N/A
None
None
Interval Type
0~35
N/A
None
Enumeration Type
OFF(Off), ON(On)
OFF~0, ON~1
None
Interval Type
65033~65233
N/A
None
Enumeration Type
BOOL(Digital Port), VALUE(Analog BOOL~0, VALUE~1 None Port)
Enumeration Type
HIGH(High Voltage), LOW(Low HIGH~0, LOW~1 Voltage)
None
Interval Type
-99999~999999
N/A
0.01
Interval Type
-99999~999999
N/A
0.01
Enumeration Type
VOLTAGE(Voltage Type), VOLTAGE~0, CURRENT(Current CURRENT~1 Type)
None
Interval Type
-99999~999999
N/A
0.01
Interval Type
-99999~999999
N/A
0.01
Interval Type
0~999999
N/A
0.01V or 0.01mA
Interval Type
0~999999
N/A
0.01V or 0.01mA
None
Enumeration Type
ALL(All Type), SSL(Only SSL)
ALL~0, SSL~1
None
None
Enumeration Type
NONE(Verify None), PEER(Verify NONE~0, PEER~1 None Peer Certificate)
None
Interval Type
0~62
N/A
None
None
Interval Type
60~254
N/A
None
None
Interval Type
0 N/A
None
None
0~31 characters
N/A
None
None
Enumeration Type
MAAU(MAAU)
MAAU~35
None
None
Enumeration Type
LOCKED(Locked), LOCKED~0, UNLOCKED(Unlock UNLOCKED~1 ed) Alarm_0(Normal), Alarm_1(Warning), Alarm_2(Minor), Alarm_3(Minor), Alarm_4(Major), Alarm_5(Major), Alarm_6(Major), Alarm_7(Major), Alarm_8(Critical), Alarm_9(Critical), Alarm_10(Critical), Alarm_11(Critical), Alarm_12(Critical), Alarm_13(Critical), Alarm_14(Critical), Alarm_15(Critical) Alarm_0~0, Alarm_1~1, Alarm_2~2, Alarm_3~3, Alarm_4~4, Alarm_5~5, Alarm_6~6, Alarm_7~7, Alarm_8~8, Alarm_9~9, Alarm_10~10, Alarm_11~11, Alarm_12~12, Alarm_13~13, Alarm_14~14, Alarm_15~15
None
None
Enumeration Type
None
None
Enumeration Type
None
None
Enumeration Type
None
None
0~2047 characters
N/A
None
None None
N/A N/A
None None
None
0~259 characters
N/A
None
None
0~11 characters
N/A
None
None
0~23 characters
N/A
None
None
N/A
None
None
Enumeration Type
None None
N/A N/A
% None
None
Enumeration Type
None
None
Interval Type
None None
degree Celsius
degree Celsius None
None
Enumeration Type
None
None
Enumeration Type
CABINET(CABINE T), SUBRACK(SUBRA CK), BOARD(BOARD), SUBBOARD(SUBB OARD), SFP(SFP)
CABINET~0, SUBRACK~1, BOARD~2, SUBBOARD~3, SFP~4
None
None
Enumeration Type
None
None
Interval Type
15~100
N/A
0.1
None
Interval Type
15~30
N/A
0.1
None
Interval Type
0~7
N/A
None
None
Interval Type
0~249
N/A
None
None
Enumeration Type
TRUNK(TRUNK)
TRUNK~0
None
None
Enumeration Type
TD_SCDMA(TD_S CDMA), LTE_TDD(LTE_TD D), TDS_TDL(TDS_TD L), LTE_FDD(LTE_FD D), WiMAX_LTE(WiMA X_LTE), CDMA_LTE(CDMA _LTE), GSM_LTE(GSM_L TE), UMTS_ONLY(UMT S_ONLY), UMTS_LTE(UMTS_ LTE)
TD_SCDMA~2, LTE_TDD~4, TDS_TDL~6, LTE_FDD~8, WiMAX_LTE~20, None CDMA_LTE~40, GSM_LTE~72, UMTS_ONLY~128, UMTS_LTE~136
None
Interval Type
0~8
N/A
None
None
Interval Type
0~8
N/A
None
None
Interval Type
0~4294967295
N/A
None
None
Interval Type
0~4294967295
N/A
None
None
Interval Type
0~4294967295
N/A
0.1MHz
None
Interval Type
0~4294967295
N/A
0.1MHz
None
Interval Type
0~4294967295
N/A
0.1MHz
None
Interval Type
0~4294967295
N/A
0.1MHz
None
Interval Type
0~500
N/A
0.1dBm
None
Interval Type
0~65535
N/A
0.1dB
None
0~31 characters
N/A
MHz
None
Interval Type
-100~200
N/A
degree Celsius
None
Interval Type
-100~200
N/A
degree Celsius
None
Interval Type
0~6
N/A
None
None
0~24 characters LO_TD(LO_TD), TL(TL), LO(LO), WO(WO), WL(WL), C0(C0), CL(CL), CW(CW), CWL(CWL), GO(GO), GL(GL), GW(GW), GWL(GWL), GC(GC), GCL(GCL), GCW(GCW), GCWL(GCWL), UO(UO), UL(UL), UW(UW), UWL(UWL), UC(UC), UCL(UCL), UCW(UCW), UCWL(UCWL), GU(GU), UGL(UGL), UGW(UGW), UGWL(UGWL), UGC(UGC), UGCL(UGCL), UGCW(UGCW), UGCWL(UGCWL), NULL(Invalid) CONNECTHEAD(A ccess from chain head or ring head), CONNECTTAIL(Ac cess from ring tail), CONNECTBOTH(A ccess from both ends of the ring), SEPERATEBYBRE AK(Seperated by break points), LINKDOWN(Link down)
N/A
None
None
Enumeration Type
LO_TD~4, TL~6, LO~8, WO~16, WL~20, C0~32, CL~40, CW~48, CWL~56, GO~64, GL~72, GW~80, GWL~88, GC~96, GCL~104, GCW~112, GCWL~120, UO~128, UL~136, UW~144, None UWL~152, UC~160, UCL~168, UCW~176, UCWL~184, GU~192, UGL~200, UGW~208, UGWL~216, UGC~224, UGCL~232, UGCW~240, UGCWL~248, NULL~255
None
Enumeration Type
CONNECTHEAD~0 , CONNECTTAIL~1, CONNECTBOTH~2 None , SEPERATEBYBRE AK~3, LINKDOWN~4
None
Interval Type
0~4294967295
N/A
0.1dBm
None
Interval Type
0~4294967295
N/A
0.1dBm
None
0~31 characters
N/A
MHz
None
Interval Type
0~4294967295
N/A
None
None
Enumeration Type
None
None
Interval Type
1~60
N/A
min
None
Enumeration Type
POW_IQ_MODE(P OW_IQ_MODE), POW_IQ_MODE~0 POW_MODE(POW , POW_MODE~1, None _MODE), IQ_MODE~2 IQ_MODE(IQ_MOD E)
None
Interval Type
9~18
N/A
None
Enumeration Type
HALFSECOND(HA LFSECOND), ONESECOND(ONE SECOND), TWOSECOND(TW OSECOND), THREESECOND(T HREESECOND), FOURSECOND(FO URSECOND), FIVESECOND(FIV ESECOND) 0~65535 0~31 characters SUCCESS(SUCCE SS), FAILURE(FAILURE ), UNKNOWTYPE(Un know Type)
HALFSECOND~5, ONESECOND~10, TWOSECOND~20, THREESECOND~3 None 0, FOURSECOND~40 , FIVESECOND~50
None None
N/A N/A
None None
None
Enumeration Type
SUCCESS~0, FAILURE~1, None UNKNOWTYPE~25 5
None
Enumeration Type
USERDEFINE(USE RDEFINE), USERDEFINE~0, DEFAULT(DEFAUL DEFAULT~1 T) 0~1000000000 N/A
None
None
Interval Type
0.000000001
None
Enumeration Type
1.25G(1.25G), 2.5G(2.5G), 3.0G(3.0G), 4.9G(4.9G), 6.1G(6.1G), 9.8G(9.8G) 0~63 characters 0~63 characters
1.25G~1, 2.5G~2, 3.0G~4, 4.9G~8, 6.1G~16, 9.8G~32
bit/s
None None
N/A N/A
None None
None
0~63 characters
N/A
None
None None
N/A N/A
None None
None
None
Interval Type
0~65535
N/A
None
None
Interval Type
0~65535
N/A
None
None
Enumeration Type
None
None
Enumeration Type
None
None
Interval Type
15~100
N/A
0.1
None
Interval Type
15~30
N/A
0.1
None
Interval Type
0~7
N/A
None
None
Interval Type
0~249
N/A
None
None
Enumeration Type
TRUNK(TRUNK)
TRUNK~0
None
None
Enumeration Type
None
Interval Type
0~8
N/A
None
None
Interval Type
0~8
N/A
None
None
Interval Type
0~4294967295
N/A
None
None
Interval Type
0~4294967295
N/A
None
None
Interval Type
0~4294967295
N/A
0.1MHz
None
Interval Type
0~4294967295
N/A
0.1MHz
None
Interval Type
0~4294967295
N/A
0.1MHz
None
Interval Type
0~4294967295
N/A
0.1MHz
None
Interval Type
0~500
N/A
0.1dBm
None
Interval Type
0~65535
N/A
0.1dB
None
0~31 characters
N/A
MHz
None
Interval Type
-100~200
N/A
degree Celsius
None
Interval Type
-100~200
N/A
degree Celsius
None
Interval Type
0~6
N/A
None
None
N/A
None
None
Enumeration Type
None
Enumeration Type
None
Interval Type
0~4294967295
N/A
0.1dBm
None
Interval Type
0~4294967295
N/A
0.1dBm
None
0~31 characters
N/A
MHz
None
Interval Type
0~4294967295
N/A
None
None
Enumeration Type
None
None
Interval Type
1~60
N/A
min
None
Enumeration Type
None
Interval Type
9~18
N/A
None
Enumeration Type
None None
N/A N/A
None None
None
Enumeration Type
None
Enumeration Type
None
None
Interval Type
0.000000001
None
Enumeration Type
1.25G(1.25G), 2.5G(2.5G), 3.0G(3.0G), 4.9G(4.9G), 6.1G(6.1G), 9.8G(9.8G) Alarm_0(Normal), Alarm_1(Warning), Alarm_2(Minor), Alarm_3(Minor), Alarm_4(Major), Alarm_5(Major), Alarm_6(Major), Alarm_7(Major), Alarm_8(Critical), Alarm_9(Critical), Alarm_10(Critical), Alarm_11(Critical), Alarm_12(Critical), Alarm_13(Critical), Alarm_14(Critical), Alarm_15(Critical)
1.25G~1, 2.5G~2, 3.0G~4, 4.9G~8, 6.1G~16, 9.8G~32
bit/s
None
Enumeration Type
None
None
Enumeration Type
None
None
Enumeration Type
None
None
0~2047 characters
N/A
None
None None
N/A N/A
None None
None
0~259 characters
N/A
None
None
0~11 characters
N/A
None
None
0~23 characters
N/A
None
None
0~19 characters
N/A
None
None
Enumeration Type
None None
N/A N/A
% None
None
Enumeration Type
None
None
Interval Type
None None
degree Celsius
degree Celsius None
None
Enumeration Type
None
None
Enumeration Type
None
None None
None None
None
0~63 characters
N/A
None
None None
N/A N/A
None None
None
None
Interval Type
0~65535
N/A
None
None
Interval Type
0~65535
N/A
None
None
Interval Type
0~62
N/A
None
None
Interval Type
4~5
N/A
None
None
Interval Type
0~8
N/A
None
None
Enumeration Type
MRFU(MRFU), LRFU(LRFU)
MRFU~16, LRFU~12304
None
None
Enumeration Type
LOCKED(Locked), LOCKED~0, UNLOCKED(Unlock UNLOCKED~1 ed) Alarm_0(Normal), Alarm_1(Warning), Alarm_2(Minor), Alarm_3(Minor), Alarm_4(Major), Alarm_5(Major), Alarm_6(Major), Alarm_7(Major), Alarm_8(Critical), Alarm_9(Critical), Alarm_10(Critical), Alarm_11(Critical), Alarm_12(Critical), Alarm_13(Critical), Alarm_14(Critical), Alarm_15(Critical) Alarm_0~0, Alarm_1~1, Alarm_2~2, Alarm_3~3, Alarm_4~4, Alarm_5~5, Alarm_6~6, Alarm_7~7, Alarm_8~8, Alarm_9~9, Alarm_10~10, Alarm_11~11, Alarm_12~12, Alarm_13~13, Alarm_14~14, Alarm_15~15
None
None
Enumeration Type
None
None
Enumeration Type
None
None
Enumeration Type
None
None
0~2047 characters
N/A
None
None None
N/A N/A
None None
None
0~259 characters
N/A
None
None
0~11 characters
N/A
None
None
0~23 characters
N/A
None
None
N/A
None
None
Enumeration Type
None None
N/A N/A
% None
None
Enumeration Type
None
None
Interval Type
None None
degree Celsius
degree Celsius None
None
Enumeration Type
None
None
Enumeration Type
None
None
Enumeration Type
None
None
Interval Type
15~100
N/A
0.1
None
Interval Type
15~30
N/A
0.1
None
Interval Type
0~7
N/A
None
None
Interval Type
0~249
N/A
None
None
Enumeration Type
TRUNK(TRUNK)
TRUNK~0
None
None
Enumeration Type
None
Interval Type
0~8
N/A
None
None
Interval Type
0~8
N/A
None
None
Interval Type
0~4294967295
N/A
None
None
Interval Type
0~4294967295
N/A
None
None
Interval Type
0~4294967295
N/A
0.1MHz
None
Interval Type
0~4294967295
N/A
0.1MHz
None
Interval Type
0~4294967295
N/A
0.1MHz
None
Interval Type
0~4294967295
N/A
0.1MHz
None
Interval Type
0~500
N/A
0.1dBm
None
Interval Type
0~65535
N/A
0.1dB
None
0~31 characters
N/A
MHz
None
Interval Type
-100~200
N/A
degree Celsius
None
Interval Type
-100~200
N/A
degree Celsius
None
Interval Type
0~6
N/A
None
None
N/A
None
None
Enumeration Type
None
Enumeration Type
None
Interval Type
0~4294967295
N/A
0.1dBm
None
Interval Type
0~4294967295
N/A
0.1dBm
None
0~31 characters
N/A
MHz
None
Interval Type
0~4294967295
N/A
None
None
Enumeration Type
None
None
Interval Type
1~60
N/A
min
None
Enumeration Type
None
Interval Type
9~18
N/A
None
Enumeration Type
None None
N/A N/A
None None
None
Enumeration Type
None
Enumeration Type
None
None
Interval Type
0.000000001
None
Enumeration Type
1.25G~1, 2.5G~2, 3.0G~4, 4.9G~8, 6.1G~16, 9.8G~32
bit/s
None None
N/A N/A
None None
None
0~63 characters
N/A
None
None None
N/A N/A
None None
None
None
Interval Type
0~65535
N/A
None
None
Interval Type
0~65535
N/A
None
None
Interval Type
0 N/A
None
None
Interval Type
60~254
N/A
None
None
Interval Type
0 N/A
None
None
0~31 characters
N/A
None
None
Enumeration Type
MRRU(MRRU), PRRU(PRRU), LRRU(LRRU)
MRRU~15, PRRU~271, LRRU~12303
None
None None
Enumeration Type Interval Type
PIMOFFLINE(PIMO PIMOFFLINE~0 FFLINE) 120~300 N/A
None s
None
Interval Type
5~20
N/A
dB
None
Interval Type
0~1
N/A
None
None
Enumeration Type
IsInerefered(It is Interfered), IsInerefered~0, IsNotInterfered(It is IsNotInterfered~1 not interfered) 0~4294967295 0~4294967295 N/A N/A
None
None None
dB dB
None
Interval Type
0~4294967295
N/A
dB
None
Enumeration Type
None
None
Enumeration Type
None
None
Enumeration Type
None
None
Enumeration Type
None
None
0~2047 characters
N/A
None
None None
N/A N/A
None None
None
0~259 characters
N/A
None
None
0~11 characters
N/A
None
None
0~23 characters
N/A
None
None
N/A
None
None
Enumeration Type
None None
N/A N/A
% None
None
Enumeration Type
None
None
Interval Type
None None
degree Celsius
degree Celsius None
None
Enumeration Type
None
None
Enumeration Type
None
None
Enumeration Type
None
None
Interval Type
15~100
N/A
0.1
None
Interval Type
15~30
N/A
0.1
None
Interval Type
0~7
N/A
None
None
Interval Type
0~249
N/A
None
None
Enumeration Type
TRUNK(TRUNK)
TRUNK~0
None
None
Enumeration Type
None
Interval Type
0~8
N/A
None
None
Interval Type
0~8
N/A
None
None
Interval Type
0~4294967295
N/A
None
None
Interval Type
0~4294967295
N/A
None
None
Interval Type
0~4294967295
N/A
0.1MHz
None
Interval Type
0~4294967295
N/A
0.1MHz
None
Interval Type
0~4294967295
N/A
0.1MHz
None
Interval Type
0~4294967295
N/A
0.1MHz
None
Interval Type
0~500
N/A
0.1dBm
None
Interval Type
0~65535
N/A
0.1dB
None
0~31 characters
N/A
MHz
None
Interval Type
-100~200
N/A
degree Celsius
None
Interval Type
-100~200
N/A
degree Celsius
None
Interval Type
0~6
N/A
None
None
N/A
None
None
Enumeration Type
None
Enumeration Type
None
Interval Type
0~4294967295
N/A
0.1dBm
None
Interval Type
0~4294967295
N/A
0.1dBm
None
0~31 characters
N/A
MHz
None
Interval Type
0~4294967295
N/A
None
None
Enumeration Type
None
None
Interval Type
1~60
N/A
min
None
Enumeration Type
None
Interval Type
9~18
N/A
None
Enumeration Type
None None
N/A N/A
None None
None
Enumeration Type
None
Enumeration Type
None
None
Interval Type
0.000000001
None
Enumeration Type
1.25G~1, 2.5G~2, 3.0G~4, 4.9G~8, 6.1G~16, 9.8G~32
bit/s
None None
N/A N/A
None None
None
0~63 characters
N/A
None
None None
N/A N/A
None None
None
None
Interval Type
0~65535
N/A
None
None
Interval Type
0~65535
N/A
None
None
Interval Type
0~249
N/A
None
None
Enumeration Type
CHAIN(CHAIN), RING(RING), LOADBALANCE(L OADBALANCE)
CHAIN~0, RING~1, None LOADBALANCE~2
None
Enumeration Type
COLD(COLD), HOT(HOT)
COLD~0, HOT~1
None
None
Interval Type
0~7
N/A
None
None
Interval Type
0~1
N/A
None
None
Interval Type
0~5
N/A
None
None
Interval Type
0~5
N/A
None
None
Interval Type
0~7
N/A
None
None
Interval Type
0~1
N/A
None
None
Interval Type
0~5
N/A
None
None
Interval Type
0~5
N/A
None
None
Interval Type
0~8,255
N/A
None
None
Interval Type
0~8,255
N/A
None
None
Enumeration Type
LOCALPORT(local port), LOCALPORT~0, PEERPORT(peer PEERPORT~1 port)
None
None
Enumeration Type
1.25G(1.25), 2.5G(2.5), 4.9G(4.9), 6.1G(6.1), 9.8G(9.8), AUTO(Auto)
1.25G~0, 2.5G~1, 4.9G~3, 6.1G~4, Gbit/s 9.8G~5, AUTO~255
None
Interval Type
0~3
N/A
None
None
Interval Type
0~3
N/A
None
None
Interval Type
0~62
N/A
None
None
Interval Type
4~5,60~254
N/A
None
None
Interval Type
0~8
N/A
None
None
Interval Type
0~7
N/A
None
None
Enumeration Type
None
None
Interval Type
0~44
N/A
0.5dB
None
Enumeration Type
None
None
Interval Type
0~4294967295
N/A
0.1MHz
None
Interval Type
0~4294967295
N/A
0.1MHz
None
0~31 characters
N/A
MHz
None
Interval Type
0~4294967295
N/A
0.1MHz
None
Interval Type
0~4294967295
N/A
0.1MHz
None
0~31 characters
N/A
MHz
None
Interval Type
0~62
N/A
None
None
Interval Type
4~5,60~254
N/A
None
None
Interval Type
0~8
N/A
None
None
Interval Type
0~7
N/A
None
None
Enumeration Type
None
None
Interval Type
100~2500
N/A
0.01
None
Enumeration Type
None
None
Interval Type
-100~10
N/A
0.1dB
None
Interval Type
0~65535
N/A
0.2MHz
None
Interval Type
30~130
N/A
0.1dB
None None None
20~30 0~65535 0~65535
N/A N/A N/A
s None None
None
0~63 characters
N/A
None
None
Interval Type
0,500~65500
N/A
10mW
None
Interval Type
0,500~65500
N/A
10mW
None
Interval Type
0~4294967295
N/A
0.1dBm
None
Interval Type
0~4294967295
N/A
0.1dBm
None
Interval Type
0,500~65500
N/A
10mW
None
Interval Type
0~4294967295
N/A
0.1MHz
None
Interval Type
0~4294967295
N/A
0.1MHz
None
0~31 characters
N/A
MHz
None
Interval Type
0~4294967295
N/A
0.1MHz
None
Interval Type
0~4294967295
N/A
0.1MHz
None
0~31 characters
N/A
MHz
None
Interval Type
0~65535
N/A
0.1MHz
None
Interval Type
0~65535
N/A
0.1MHz
None
Enumeration Type
Normal(Normal), Normal~0, Unknown(Unknown) Unknown~1, , Crossed(Crossed) Crossed~2 Valid IP address N/A
None
None
IP Address Type
None
None
Interval Type
1~525600
N/A
min
None
Interval Type
123~5999,6100~65 N/A 534
None
None
Enumeration Type
IPV4~0, IPV6~1
None
None
IP Address Type
Valid IP address PLAIN(Plain), DES_S(DES_S), DES_N(DES_N), DES_A(DES_A), MD5(MD5)
N/A
None
None
Enumeration Type
PLAIN~0, DES_S~1, DES_N~2, DES_A~3, MD5~4
None
None
Password Type
1~16 characters
N/A
None
None
Interval Type
1~4294967295
N/A
None
None
Enumeration Type
Slaver(Slave), Master(Master)
Slaver~0, Master~1 None
None
Enumeration Type
GMT-1200(GMT12:00), GMT1100(GMT-11:00), GMT-1000(GMT10:00), GMT0930(GMT-09:30), GMT-0900(GMT09:00), GMT0800(GMT-08:00), GMT-0700(GMT07:00), GMT0600(GMT-06:00), GMT-0500(GMT05:00), GMT0430(GMT-04:30), GMT-0400(GMT04:00), GMT0330(GMT-03:30), GMT-0300(GMT03:00), GMT0200(GMT-02:00), GMT-0100(GMT01:00), GMT(GMT), GMT+0100(GMT+0 1:00), GMT+0200(GMT+0 2:00), GMT+0300(GMT+0 3:00), GMT+0330(GMT+0 3:30), GMT+0400(GMT+0 4:00), GMT+0430(GMT+0 NO(No), YES(Yes)
GMT-1200~0, GMT1100~4, GMT1000~8, GMT0930~10, GMT0900~12, GMT0800~16, GMT0700~20, GMT0600~24, GMT0500~28, GMT0430~30, GMT0400~32, GMT0330~34, GMT0300~36, GMT0200~40, GMT0100~44, GMT~48, GMT+0100~52, GMT+0200~56, None GMT+0300~60, GMT+0330~62, GMT+0400~64, GMT+0430~66, GMT+0500~68, GMT+0530~70, GMT+0545~71, GMT+0600~72, GMT+0630~74, GMT+0700~76, GMT+0800~80, GMT+0845~83, GMT+0900~84, GMT+0930~86, GMT+1000~88, GMT+1030~90, GMT+1100~92, NO~0, YES~1 None
None
Enumeration Type
None
Enumeration Type
DATE(Date mode), WEEK(Week DATE~0, WEEK~1, mode), None DATEWEEK~2 DATEWEEK(Date and week mode)
None
Enumeration Type
JAN(January), FEB(February), MAR(March), APR(April), MAY(May), JUN(June), JUL(July), AUG(August), SEP(September), OCT(October), NOV(November), DEC(December)
JAN~1, FEB~2, MAR~3, APR~4, MAY~5, JUN~6, JUL~7, AUG~8, SEP~9, OCT~10, NOV~11, DEC~12
None
None
Interval Type
1~31
N/A
None
None
Enumeration Type
LAST(Last), FIRST(First), SECOND(Second), THIRD(Third), FOURTH(Fourth) MON(Monday), TUE(Tuesday), WED(Wednesday), THU(Thursday), FRI(Friday), SAT(Saturday), SUN(Sunday)
LAST~0, FIRST~1, SECOND~2, None THIRD~3, FOURTH~4
None
Enumeration Type
MON~1, TUE~2, WED~3, THU~4, FRI~5, SAT~6, SUN~7
None
None
Compound Type
00:00:00~23:59:59
N/A
None
None
Enumeration Type
DATE(Date mode), WEEK(Week DATE~0, WEEK~1, mode), None DATEWEEK~2 DATEWEEK(Date and week mode)
None
Enumeration Type
JAN(January), FEB(February), MAR(March), APR(April), MAY(May), JUN(June), JUL(July), AUG(August), SEP(September), OCT(October), NOV(November), DEC(December)
JAN~1, FEB~2, MAR~3, APR~4, MAY~5, JUN~6, JUL~7, AUG~8, SEP~9, OCT~10, NOV~11, DEC~12
None
None
Interval Type
1~31
N/A
None
None
Enumeration Type
LAST(Last), FIRST(First), SECOND(Second), THIRD(Third), FOURTH(Fourth) MON(Monday), TUE(Tuesday), WED(Wednesday), THU(Thursday), FRI(Friday), SAT(Saturday), SUN(Sunday)
LAST~0, FIRST~1, SECOND~2, None THIRD~3, FOURTH~4
None
Enumeration Type
MON~1, TUE~2, WED~3, THU~4, FRI~5, SAT~6, SUN~7
None
None
Compound Type
00:00:00~23:59:59
N/A
None
None
Interval Type
-120~120
N/A
min
None
Interval Type
-720~840
N/A
min
None
Compound Type
2000-01-01~203312-31
N/A
None
None
Compound Type
00:00:00~23:59:59
N/A
None
None
Compound Type
None
N/A
None
None
Enumeration Type
NTP(NTP), GPS(GPS), NONE(None)
NTP~0, GPS~1, NONE~2
None
None
0~30 characters
N/A
None
None
IP Address Type
Valid IP address
N/A
None
None
Interval Type
21~65535
N/A
None
None
Interval Type
0~3
N/A
None
None
Interval Type
10~254
N/A
None
Service based interRAT handover to UTRAN Interval Type Service based interRAT handover to GERAN
0~9
N/A
None
Service Based InterInterval Type frequency Handover
0~9
N/A
None
None
Interval Type
0~3
N/A
None
None
Enumeration Type
QCI1(QCI 1), QCI2(QCI 2), QCI3(QCI 3), QCI4(QCI 4), QCI5(QCI 5), QCI6(QCI 6), QCI7(QCI 7), QCI8(QCI 8), QCI9(QCI 9)
QCI1~1, QCI2~2, QCI3~3, QCI4~4, QCI5~5, QCI6~6, QCI7~7, QCI8~8, QCI9~9
None
0~9
N/A
None
0~9
N/A
None
None
Interval Type
0~3
N/A
None
CS Fallback to UTRAN CS Fallback to GERAN CS Fallback to CDMA2000 1xRTT CS Fallback with LAI to UTRAN CS Fallback with LAI to GERAN Flash CS Fallback to UTRAN Flash CS Fallback Enumeration Type to GERAN PS Inter-RAT Mobility between EUTRAN and UTRAN PS Inter-RAT Mobility between EUTRAN and GERAN PS Inter-RAT Mobility between EUTRAN and CDMA2000 CS Fallback to UTRAN CS Fallback to GERAN CS Fallback to CDMA2000 1xRTT PS Inter-RAT Mobility between EUTRAN and Enumeration Type UTRAN PS Inter-RAT Mobility between EUTRAN and GERAN PS Inter-RAT Mobility between EUTRAN and CDMA2000
UTRAN, GERAN, CDMA2000
UTRAN~0, GERAN~1, CDMA2000~2
None
UTRAN, GERAN, CDMA2000, NULL
UTRAN~0, GERAN~1, CDMA2000~2, NULL~3
None
CS Fallback to UTRAN CS Fallback to GERAN CS Fallback to CDMA2000 1xRTT PS Inter-RAT Mobility between EUTRAN and Enumeration Type UTRAN PS Inter-RAT Mobility between EUTRAN and GERAN PS Inter-RAT Mobility between EUTRAN and CDMA2000 CS Fallback to UTRAN LoCation Services(LCS)
UTRAN~0, GERAN~1, CDMA2000~2, NULL~3
None
Enumeration Type
OFF(Off), ON(On)
OFF~0, ON~1
None
CS Fallback to GERAN LoCation Services(LCS)
Enumeration Type
OFF(Off), ON(On)
OFF~0, ON~1
None
CS Fallback to CDMA2000 1xRTT Enumeration Type LoCation Services(LCS)
OFF(Off), ON(On)
OFF~0, ON~1
None
None
Interval Type
0~3
N/A
None
Coverage Based Intra-frequency Handover Coverage Based Inter-frequency Handover PS Inter-RAT Mobility between EUTRAN and UTRAN PS Inter-RAT Mobility between EUTRAN and GERAN PS Inter-RAT Mobility between EUTRAN and CDMA2000 Coverage Based Intra-frequency Handover Coverage Based Inter-frequency Handover PS Inter-RAT Mobility between EUTRAN and UTRAN PS Inter-RAT Mobility between EUTRAN and GERAN PS Inter-RAT Mobility between EUTRAN and CDMA2000
3 characters
N/A
None
2~3 characters
N/A
None
Intra-LTE Load Balancing Inter-RAT Load Interval Type Sharing to UTRAN Inter-RAT Load Sharing to GERAN
0~255
N/A
None
Intra-LTE Load Balancing Inter-RAT Load Enumeration Type Sharing to UTRAN Inter-RAT Load Sharing to GERAN
LTE, UTRAN, GERAN
LTE~0, UTRAN~1, None GERAN~2
Intra-LTE Load Balancing Inter-RAT Load Interval Type Sharing to UTRAN Inter-RAT Load Sharing to GERAN
0~45589,64436~65 N/A 535
None
Inter-RAT Load Sharing to UTRAN Interval Type Inter-RAT Load Sharing to GERAN
0~7
N/A
None
Intra-LTE Load Balancing Inter-RAT Load Enumeration Type Sharing to UTRAN Inter-RAT Load Sharing to GERAN
GSM_dcs1800, GSM_pcs1900
GSM_dcs1800~0, GSM_pcs1900~1
None
0~3
N/A
None
0~9
N/A
None
Service Based InterEnumeration Type frequency Handover
NO_HO, PERMIT_HO
NO_HO~0, PERMIT_HO~1
None
0~45589,64436~65 N/A 535
None
0~3
N/A
None
0~9
N/A
None
Service based interRAT handover to UTRAN Enumeration Type Service based interRAT handover to GERAN
NO_HO, PERMIT_HO, MUST_HO
NO_HO~0, PERMIT_HO~1, MUST_HO~2
None
Intra-LTE Load Balancing Inter-RAT Load Sharing to UTRAN Inter-RAT Load Sharing to GERAN Interval Type Flexible User Steering Camp & Handover Based on SPID UL Pre-allocation Based on SPID
1~256
N/A
None
DRX
Enumeration Type
FALSE(FALSE), TRUE(TRUE)
Intra-LTE Load Balancing Inter-RAT Load Enumeration Type Sharing to UTRAN Inter-RAT Load Sharing to GERAN Intra-LTE Load Balancing Inter-RAT Load Sharing to UTRAN Inter-RAT Load Sharing to GERAN Interval Type Flexible User Steering Camp & Handover Based on SPID UL Pre-allocation Based on SPID
NOT_CFG(NOT_C NOT_CFG~0, FG), CFG(CFG) CFG~1
None
0~255
N/A
None
UL Pre-allocation Based on SPID
Enumeration Type
Intra-LTE Load Balancing
Enumeration Type
Enumeration Type
Enumeration Type
Integrity Protection
Interval Type
0,10~600
N/A
Interval Type
0,128~4294967295 N/A
None
Enumeration Type
OFF(Off), ON(On)
OFF~0, ON~1
None
Encryption: AES Encryption: SNOW Enumeration Type 3G
NULL(NULL Algorithm), Snow3G(SNOW 3G NULL~0, None Algorithm), Snow3G~1, AES~2 AES(AES Algorithm)
None
Interval Type
10~200
N/A
None
Interval Type
10~200
N/A
None
Interval Type
10~200
N/A
Enumeration Type
Enumeration Type
Enumeration Type
Mobility Management Coverage Based Intra-frequency Handover Coverage Based Inter-frequency Handover
Enumeration Type
OFF(Off), ON(On)
OFF~0, ON~1
None
Enumeration Type
X2_OVER_M2000( X2SonLink is set up over M2000), X2_OVER_M2000~ None X2_OVER_S1(X2S 0, X2_OVER_S1~1 onLink is set up over S1)
Enhanced Scheduling
Enumeration Type
OFF(Off), ON(On)
OFF~0, ON~1
None
Basic Scheduling Enhanced Scheduling
Enumeration Type
LCG_PROFILE_0, LCG_PROFILE_1
LCG_PROFILE_0~ 0, None LCG_PROFILE_1~ 1
PS Inter-RAT Mobility between EEnumeration Type UTRAN and UTRAN
OFF(Off), ON(On)
OFF~0, ON~1
None
RRC Connection Management
Enumeration Type
OFF(Off), ON(On)
OFF~0, ON~1
None
None
Enumeration Type
OFF(Off), ON(On)
OFF~0, ON~1
None
RObust Header Compression (ROHC)
Enumeration Type
OFF(Off), ON(On)
OFF~0, ON~1
None
Enumeration Type
U_MODE(Unidirecti onal Mode), O_MODE(BiU_MODE~1, directional O_MODE~2, Optimistic Mode), R_MODE~3 R_MODE(BiDirectional Reliable Mode)
None
Bit Field Type
Profile0x0001(Profil e0x0001), Profile0x0002(Profil e0x0002), Profile0x0003(Profil e0x0003), Profile0x0004(Profil e0x0004)
Profile0x0001~0, Profile0x0002~1, Profile0x0003~2, Profile0x0004~3
None
Interval Type
1~16
N/A
Mobility Management Cell Selection and Re-selection
Enumeration Type
min5(5), min10(10), min20(20), min30(30), min60(60), min120(120), min180(180)
min5~0, min10~1, min20~2, min30~3, min60~4, min min120~5, min180~6
Enumeration Type
ms50(50), ms100(100), ms150(150), ms200(200), ms500(500), ms1000(1000), ms2000(2000)
ms50~0, ms100~1, ms150~2, ms200~3, ms ms500~4, ms1000~5, ms2000~6
Enumeration Type
ms100(100), ms200(200), ms500(500), ms1000(1000), ms2000(2000), ms4000(4000), ms8000(8000)
ms100~0, ms200~1, ms500~2, ms1000~3, ms2000~4, ms4000~5, ms8000~6
ms
Enumeration Type
min5(5), min10(10), min20(20), min30(30), min60(60), min120(120), min180(180)
min5~0, min10~1, min20~2, min30~3, min60~4, min min120~5, min180~6
Interval Type
0~3600
N/A
Interval Type
0~3600
N/A
None
Interval Type
0~255
N/A
None
None
Enumeration Type
IPv4(IPv4 Address), IPv4~0, IPv6~1 IPv6(IPv6 Address)
None
None
IP Address Type
Valid IP address
N/A
None
None
IP Address Type
Valid IP address
N/A
None
None
Interval Type
0~17
N/A
None
Dynamic Downlink Power Allocation
Enumeration Type
OFF(Off), ON(On)
OFF~0, ON~1
None
Enumeration Type
DB_6_P_A(-6 dB), DB_4DOT77_P_A(4.77 dB), DB_3_P_A(-3 dB), DB_1DOT77_P_A(1.77 dB), DB0_P_A(0 dB), DB1_P_A(1 dB), DB2_P_A(2 dB), DB3_P_A(3 dB)
DB_6_P_A~0, DB_4DOT77_P_A~ 1, DB_3_P_A~2, DB_1DOT77_P_A~ dB 3, DB0_P_A~4, DB1_P_A~5, DB2_P_A~6, DB3_P_A~7
None
Interval Type
0~17
N/A
None
DRX
Interval Type
0~999
N/A
per mill
DRX
Interval Type
1~1000
N/A
per mill
DRX
Interval Type
0~1999
N/A
per mill
DRX
Interval Type
1~2000
N/A
per mill
DRX
Interval Type
0~1999
N/A
per mill
DRX
Interval Type
1~2000
N/A
per mill
DRX
Interval Type
2~300
N/A
20ms
None
Interval Type
0~17
N/A
None
Uplink Power Control
Enumeration Type
UU_DISABLE(Disa ble), UU_DISABLE~0, UU_ENABLE(Enabl UU_ENABLE~1 e)
None
Interval Type
-105,-90,-75,-60,45,-30,N/A 15,0,15,30,45,60,75 ,90,105,120
0.1dB
Interval Type
-30,-20,10,0,10,20,30,40,50 N/A ,60,70,80,90,100,11 0,120
0.1dB
Enumeration Type
UU_FC0_FILTER_ COEFF(UU_FC0_F ILTER_COEFF), UU_FC1_FILTER_ COEFF(UU_FC1_F ILTER_COEFF), UU_FC2_FILTER_ COEFF(UU_FC2_F ILTER_COEFF), UU_FC3_FILTER_ COEFF(UU_FC3_F ILTER_COEFF), UU_FC4_FILTER_ COEFF(UU_FC4_F ILTER_COEFF), UU_FC5_FILTER_ COEFF(UU_FC5_F ILTER_COEFF), UU_FC6_FILTER_ COEFF(UU_FC6_F ILTER_COEFF), UU_FC7_FILTER_ COEFF(UU_FC7_F ILTER_COEFF), UU_FC8_FILTER_ COEFF(UU_FC8_F ILTER_COEFF), UU_FC9_FILTER_ COEFF(UU_FC9_F ILTER_COEFF), UU_FC11_FILTER_ COEFF(UU_FC11_ FILTER_COEFF), UU_FC13_FILTER_
UU_FC0_FILTER_ COEFF~0, UU_FC1_FILTER_ COEFF~1, UU_FC2_FILTER_ COEFF~2, UU_FC3_FILTER_ COEFF~3, UU_FC4_FILTER_ COEFF~4, UU_FC5_FILTER_ COEFF~5, UU_FC6_FILTER_ COEFF~6, UU_FC7_FILTER_ None COEFF~7, UU_FC8_FILTER_ COEFF~8, UU_FC9_FILTER_ COEFF~9, UU_FC11_FILTER_ COEFF~10, UU_FC13_FILTER_ COEFF~11, UU_FC15_FILTER_ COEFF~12, UU_FC17_FILTER_ COEFF~13, UU_FC19_FILTER_ COEFF~14
None
Interval Type
0~17
N/A
None
Distance based Inter-RAT handover to UTRAN Distance based Inter-RAT handover Bit Field Type to GERAN Distance Based Inter-frequency Handover
EUTRAN~0, EUTRAN, GERAN, GERAN~1, UTRAN UTRAN~2
None
Distance Based Inter-frequency Handover Distance based Inter-RAT handover Interval Type to UTRAN Distance based Inter-RAT handover to GERAN
1~1000
N/A
100m
None
Interval Type
0~17
N/A
None
None
Interval Type
0~9
N/A
None
DRX
Enumeration Type
OFF(Off), ON(On)
OFF~0, ON~1
None
DRX
Enumeration Type
PSF1(1 subframe), PSF2(2 subframes), PSF3(3 subframes), PSF4(4 subframes), PSF5(5 subframes), PSF6(6 subframes), PSF8(8 subframes), PSF10(10 subframes), PSF20(20 subframes), PSF30(30 subframes), PSF40(40 subframes), PSF50(50 subframes), PSF60(60 subframes), PSF80(80 subframes), PSF100(100 subframes), PSF200(200 subframes)
PSF1~0, PSF2~1, PSF3~2, PSF4~3, PSF5~4, PSF6~5, PSF8~6, PSF10~7, PSF20~8, PSF30~9, subframe PSF40~10, PSF50~11, PSF60~12, PSF80~13, PSF100~14, PSF200~15
DRX
Enumeration Type
PSF1(1 subframe), PSF2(2 subframes), PSF3(3 subframes), PSF4(4 subframes), PSF5(5 subframes), PSF6(6 subframes), PSF8(8 subframes), PSF10(10 subframes), PSF20(20 subframes), PSF30(30 subframes), PSF40(40 subframes), PSF50(50 subframes), PSF60(60 subframes), PSF80(80 subframes), PSF100(100 subframes), PSF200(200 subframes), PSF300(300 subframes), PSF500(500 subframes), PSF750(750 subframes), PSF1280(1280 subframes), PSF1920(1920
PSF1~0, PSF2~1, PSF3~2, PSF4~3, PSF5~4, PSF6~5, PSF8~6, PSF10~7, PSF20~8, PSF30~9, PSF40~10, PSF50~11, PSF60~12, subframe PSF80~13, PSF100~14, PSF200~15, PSF300~16, PSF500~17, PSF750~18, PSF1280~19, PSF1920~20, PSF2560~21
DRX DL Asynchronous HARQ
Enumeration Type
sf1(1 subframe), sf2(2 subframes), sf4(4 subframes), sf6(6 subframes), sf8(8 subframes), sf16(16 subframes), sf24(24 subframes), sf33(33 subframes)
sf1~0, sf2~1, sf4~2, sf6~3, sf8~4, subframe sf16~5, sf24~6, sf33~7
DRX
Enumeration Type
SF10(10 subframes), SF20(20 subframes), SF32(32 subframes), SF40(40 subframes), SF64(64 subframes), SF80(80 subframes), SF128(128 subframes), SF160(160 subframes), SF256(256 subframes), SF320(320 subframes), SF512(512 subframes), SF640(640 subframes), SF1024(1024 subframes), SF1280(1280 subframes), SF2048(2048 subframes), SF2560(2560 subframes)
SF10~0, SF20~1, SF32~2, SF40~3, SF64~4, SF80~5, SF128~6, SF160~7, SF256~8, SF320~9, SF512~10, subframe SF640~11, SF1024~12, SF1280~13, SF2048~14, SF2560~15
DRX
Enumeration Type
None
DRX
Enumeration Type
SF2~0, SF5~1, SF8~2, SF10~3, SF16~4, SF20~5, SF32~6, SF40~7, SF64~8, SF80~9, SF128~10, SF160~11, SF256~12, SF320~13, SF512~14, SF640~15
subframe
DRX
Interval Type
1~16
N/A
None
3GPP R8 Specifications
Interval Type
0~17
N/A
None
PS Inter-RAT Mobility between EUTRAN and UTRAN PS Inter-RAT Mobility between EUTRAN and Interval Type GERAN PS Inter-RAT Mobility between EUTRAN and CDMA2000 SRVCC to UTRAN SRVCC to GERAN
0~9
N/A
None
PS Inter-RAT Mobility between EUTRAN and GERAN SRVCC to GERAN PS Inter-RAT Mobility between EInterval Type UTRAN and CDMA2000 PS Inter-RAT Mobility between EUTRAN and UTRAN SRVCC to UTRAN
0~30
N/A
0.5dB
SRVCC to GERAN SRVCC to UTRAN PS Inter-RAT Mobility between EUTRAN and UTRAN PS Inter-RAT Enumeration Type Mobility between EUTRAN and GERAN PS Inter-RAT Mobility between EUTRAN and CDMA2000
0ms, 40ms, 64ms, 80ms, 100ms, 128ms, 160ms, 256ms, 320ms, 480ms, 512ms, 640ms, 1024ms, 1280ms, 2560ms, 5120ms
0ms~0, 40ms~1, 64ms~2, 80ms~3, 100ms~4, 128ms~5, 160ms~6, 256ms~7, 320ms~8, 480ms~9, 512ms~10, 640ms~11, 1024ms~12, 1280ms~13, 2560ms~14, 5120ms~15
ms
SRVCC to GERAN PS Inter-RAT Mobility between EUTRAN and UTRAN PS Inter-RAT Mobility between EInterval Type UTRAN and GERAN PS Inter-RAT Mobility between EUTRAN and CDMA2000 SRVCC to UTRAN
-141~-43
N/A
dBm
-40~-6
N/A
0.5dB
-141~-43
N/A
dBm
-40~-6
N/A
0.5dB
Mobility Management
Interval Type
0~15
N/A
dB
Interval Type
0~17
N/A
None
PS Inter-RAT Mobility between EInterval Type UTRAN and CDMA2000
0~9
N/A
None
0~30
N/A
0.5dB
-63~0
N/A
0.5dB
PS Inter-RAT Mobility between EEnumeration Type UTRAN and CDMA2000
None
-63~0
N/A
0.5dB
Enhanced Scheduling Dynamic Scheduling
Interval Type
10~254
N/A
None
Interval Type
0~17
N/A
None
Coverage Based Inter-frequency Handover
Interval Type
0~9
N/A
None
0~9
N/A
None
0~9
N/A
None
PS Inter-RAT Mobility between EUTRAN and UTRAN PS Inter-RAT Mobility between EInterval Type UTRAN and GERAN PS Inter-RAT Mobility between EUTRAN and CDMA2000
0~9
N/A
None
PS Inter-RAT Mobility between EInterval Type UTRAN and GERAN
0~9
N/A
None
PS Inter-RAT Mobility between EInterval Type UTRAN and UTRAN
0~9
N/A
None
Coverage Based Intra-frequency Handover
Interval Type
0~9
N/A
None
DRX
Interval Type
0~9
N/A
None
Interval Type
0~17
N/A
None
Enumeration Type
None
Interval Type
0~9
N/A
None
0~9
N/A
None
PS Inter-RAT Mobility between EInterval Type UTRAN and CDMA2000 PS Inter-RAT Mobility between EUTRAN and UTRAN PS Inter-RAT Mobility between EInterval Type UTRAN and GERAN PS Inter-RAT Mobility between EUTRAN and CDMA2000 PS Inter-RAT Mobility between EInterval Type UTRAN and GERAN
0~9
N/A
None
0~9
N/A
None
0~9
N/A
None
0~9
N/A
None
Interval Type
0~9
N/A
None
DRX
Interval Type
0~9
N/A
None
Enumeration Type
ms5(SRI 5ms), ms10(SRI 10ms), ms20(SRI 20ms), ms40(SRI 40ms), ms80(SRI 80ms)
ms5~0, ms10~1, ms20~2, ms40~3, ms80~4
None
Interval Type
0~17
N/A
None
0~9
N/A
None
0~30
N/A
0.5dB
-63~0
N/A
0.5dB
ms
PS Inter-RAT Mobility between EUTRAN and Interval Type CDMA2000 Intra-LTE Load Balancing
-63~0
N/A
0.5dB
Interval Type
0~17
N/A
None
PS Inter-RAT Mobility between EUTRAN and Interval Type GERAN SRVCC to GERAN
0~9
N/A
None
PS Inter-RAT Mobility between EUTRAN and GERAN Interval Type SRVCC to GERAN Service based interRAT handover to GERAN
0~30
N/A
0.5dB
PS Inter-RAT Mobility between EUTRAN and Interval Type GERAN SRVCC to GERAN
-110~-48
N/A
dBm
PS Inter-RAT Mobility between EUTRAN and GERAN Enumeration Type SRVCC to GERAN Service based interRAT handover to GERAN
ms
PS Inter-RAT Mobility between EUTRAN and GERAN Intra-LTE Load Interval Type Balancing Service based interRAT handover to GERAN
-110~-48
N/A
dBm
Interval Type
0~17
N/A
None
PS Inter-RAT Mobility between EUTRAN and Interval Type UTRAN SRVCC to UTRAN
0~9
N/A
None
-48~0
N/A
0.5dB
-120~-25
N/A
dBm
PS Inter-RAT Mobility between EUTRAN and UTRAN Interval Type SRVCC to UTRAN Service based interRAT handover to UTRAN
0~30
N/A
0.5dB
PS Inter-RAT Mobility between EUTRAN and UTRAN Enumeration Type SRVCC to UTRAN Service based interRAT handover to UTRAN
ms
PS Inter-RAT Mobility between EUTRAN and UTRAN Intra-LTE Load Interval Type Balancing Service based interRAT handover to UTRAN
-48~0
N/A
0.5dB
PS Inter-RAT Mobility between EUTRAN and UTRAN Intra-LTE Load Interval Type Balancing Service based interRAT handover to UTRAN
-120~-25
N/A
dBm
Interval Type
0~17
N/A
None
Coverage Based Intra-frequency Handover Coverage Based Inter-frequency Handover
Interval Type
0~9
N/A
None
Interval Type
0~30
N/A
0.5dB
Enumeration Type
ms
Interval Type
-141~-43
N/A
dBm
Interval Type
-40~-6
N/A
0.5dB
Interval Type
-141~-43
N/A
dBm
Interval Type
-40~-6
N/A
0.5dB
Interval Type
0~30
N/A
0.5dB
Interval Type
-141~-43
N/A
dBm
Interval Type
-40~-6
N/A
0.5dB
Enumeration Type
ms
Interval Type
-141~-43
N/A
dBm
Interval Type
-40~-6
N/A
0.5dB
None
Interval Type
-141~-43
N/A
dBm
None
Interval Type
-40~-6
N/A
0.5dB
Interval Type
-30~30
N/A
0.5dB
Interval Type
-141~-44
N/A
dBm
Interval Type
-141~-44
N/A
dBm
None
Interval Type
-140~-43
N/A
dBm
None
Interval Type
-40~-6
N/A
0.5dB
Interval Type
0~17
N/A
None
Interval Type
0~9
N/A
None
Coverage Based Intra-frequency Handover Intra-LTE Load Balancing
Interval Type
0~30
N/A
0.5dB
Interval Type
-30~30
N/A
0.5dB
Enumeration Type
ms
RAN Sharing with Common Carrier RAN Sharing with Dedicated Carrier
Interval Type
0~3
N/A
None
None
1~32 characters
N/A
None
Enumeration Type
CNOPERATOR_P RIMARY(Primary Operator), CNOPERATOR_SE CONDARY(Second ary Operator)
CNOPERATOR_P RIMARY~0, None CNOPERATOR_SE CONDARY~1
None
3 characters
N/A
None
None
2~3 characters
N/A
None
None
Interval Type
0~65535
N/A
None
Interval Type
0~3
N/A
None
Interval Type
0~65535
N/A
None
Interval Type
0~3
N/A
None
Interval Type
0~65535
N/A
None
Interval Type
0~3
N/A
None
Emergency Call
Enumeration Type
OFF(Off), ON(On)
OFF~0, ON~1
None
Emergency Call
Enumeration Type
OFF(Off), ON(On)
OFF~0, ON~1
None
Emergency Call
Interval Type
1~15
N/A
None
Emergency Call
Interval Type
1~15
N/A
None
Enumeration Type
INDEPENDENT(Ind ependent Operator Mode), SHARED_FREQ(S hared Frequency Sharing Mode), SEPARATED_FRE Q(Separate Frequency Sharing Mode)
INDEPENDENT~0, SHARED_FREQ~1, None SEPARATED_FRE Q~2
Interval Type
0~3
N/A
None
RAN Sharing with Common Carrier RAN Sharing with Dedicated Carrier License Management
Interval Type
1~100
N/A
None
Interval Type
1~300
N/A
None
Interval Type
1~300
N/A
S1-flex
Interval Type
0~15
N/A
None
S1-flex
Interval Type
0~79
N/A
None
S1-flex RAN Sharing with Common Carrier RAN Sharing with Dedicated Carrier
Interval Type
0~3
N/A
None
Enumeration Type
Release_R8(Releas e 8), Release_R8~0, Release_R9(Releas Release_R9~1, e 9), Release_R10~2 Release_R10(Relea se 10)
None
None
Enumeration Type
None
Enumeration Type
None
Enumeration Type
Normal(Normal), Abnormal(Abnormal ) Normal(Normal), Abnormal(Abnormal ), Blocked(Blocked) FALSE(FALSE), TRUE(TRUE), NULL(NULL)
Normal~0, Abnormal~1 Normal~0, Abnormal~1, Blocked~2 FALSE~0, TRUE~1, NULL~2
None
None
S1-flex
Enumeration Type
None
None
Interval Type
0~3600
N/A
None
None
0~150 characters
N/A
None
S1-flex RAN Sharing with Common Carrier RAN Sharing with Dedicated Carrier
0~224 characters
N/A
None
None
0~300 characters
N/A
None
None
Interval Type
0~255
N/A
None
None
Enumeration Type
Null(Null), LowerLinkFault(Low er Layer Link Fault), MmecImpact(Mmec Impact), SetupFail(Setup Failure), CfgErr(Configuratio n Error), LicRestrict(License Restriction), PlmnDiff(The PLMN of the operator owning the S1 interface is not supported by the MME), TacNotCfg(The TAC for the operator owning the S1 interface is not configured), Undefine(Undefine)
Null~0, LowerLinkFault~1, MmecImpact~2, SetupFail~3, CfgErr~4, LicRestrict~5, PlmnDiff~6, TacNotCfg~7, Undefine~255
None
None
Interval Type
0~15
N/A
None
None
Enumeration Type
DISABLE(disable), ENABLE(enable)
DISABLE~0, ENABLE~1
None
None
3 characters
N/A
None
None
2~3 characters
N/A
None
None
Interval Type
0~1048575
N/A
None
None
Enumeration Type
X2_BLACK_LIST_T YPE(), X2_WHITE_LIST_T YPE()
X2_BLACK_LIST_T YPE~0, None X2_WHITE_LIST_T YPE~1
Interval Type
16~79
N/A
None
None
Interval Type
0~79
N/A
None
Interval Type
0~3
N/A
None
Enumeration Type
None
None
Enumeration Type
FORBID_AUTO_R MV(Forbid Auto Remove), PERMIT_AUTO_R MV(Permit Auto Remove)
FORBID_AUTO_R MV~0, None PERMIT_AUTO_R MV~1
None
0~50 characters
N/A
None
None
0~50 characters
N/A
None
None
Enumeration Type
Normal(Normal), Normal~0, Abnormal(Abnormal Abnormal~1 )
None
None
Enumeration Type
SCTP_LINK_FAUL T(SCTP Link Failure), SETUP_FAILURE_ OCCUR(Setup Failure), PEERIN_BLACK_LI ST(Peer eNodeB Blacklisted), STATE_NORMAL( NULL), SETUP_ONLY_ON E_LINK_ALLOWED (Only one interface allowed to be setup between two logical eNodeBs)
SCTP_LINK_FAUL T~0, SETUP_FAILURE_ OCCUR~1, PEERIN_BLACK_LI ST~2, None STATE_NORMAL~ 3, SETUP_ONLY_ON E_LINK_ALLOWED ~4
DRX
Enumeration Type
OFF(Off), ON(On)
OFF~0, ON~1
None
DRX
Enumeration Type
OFF(Off), ON(On)
OFF~0, ON~1
None
DRX
Enumeration Type
SF10~0, SF20~1, SF32~2, SF40~3, SF64~4, SF80~5, SF128~6, SF160~7, SF256~8, SF320~9, SF512~10, subframe SF640~11, SF1024~12, SF1280~13, SF2048~14, SF2560~15
DRX
Enumeration Type
PSF1(1 subframe), PSF2(2 subframes), PSF3(3 subframes), PSF4(4 subframes), PSF5(5 subframes), PSF6(6 subframes), PSF8(8 subframes), PSF10(10 subframes), PSF20(20 subframes), PSF30(30 subframes), PSF40(40 subframes), PSF50(50 subframes), PSF60(60 subframes), PSF80(80 subframes), PSF100(100 subframes), PSF200(200 subframes)
PSF1~0, PSF2~1, PSF3~2, PSF4~3, PSF5~4, PSF6~5, PSF8~6, PSF10~7, PSF20~8, PSF30~9, subframe PSF40~10, PSF50~11, PSF60~12, PSF80~13, PSF100~14, PSF200~15
DRX
Enumeration Type
PSF1(1 subframe), PSF2(2 subframes), PSF3(3 subframes), PSF4(4 subframes), PSF5(5 subframes), PSF6(6 subframes), PSF8(8 subframes), PSF10(10 subframes), PSF20(20 subframes), PSF30(30 subframes), PSF40(40 subframes), PSF50(50 subframes), PSF60(60 subframes), PSF80(80 subframes), PSF100(100 subframes), PSF200(200 subframes), PSF300(300 subframes), PSF500(500 subframes), PSF750(750 subframes), PSF1280(1280 subframes), PSF1920(1920
PSF1~0, PSF2~1, PSF3~2, PSF4~3, PSF5~4, PSF6~5, PSF8~6, PSF10~7, PSF20~8, PSF30~9, PSF40~10, PSF50~11, PSF60~12, subframe PSF80~13, PSF100~14, PSF200~15, PSF300~16, PSF500~17, PSF750~18, PSF1280~19, PSF1920~20, PSF2560~21
DRX
Enumeration Type
None
DRX
Enumeration Type
SF2~0, SF5~1, SF8~2, SF10~3, SF16~4, SF20~5, SF32~6, SF40~7, SF64~8, SF80~9, SF128~10, SF160~11, SF256~12, SF320~13, SF512~14, SF640~15
subframe
DRX
Interval Type
1~16
N/A
None
DRX
Enumeration Type
SF128(128 subframes), SF160(160 subframes), SF256(256 subframes), SF320(320 subframes), SF512(512 subframes), SF640(640 subframes), SF1024(1024 subframes), SF1280(1280 subframes), SF2048(2048 subframes), SF2560(2560 subframes) SF128(128 subframes), SF160(160 subframes), SF256(256 subframes), SF320(320 subframes), SF512(512 subframes), SF640(640 subframes), SF1024(1024 subframes), SF1280(1280 subframes), SF2048(2048 subframes), SF2560(2560 subframes)
SF128~6, SF160~7, SF256~8, SF320~9, SF512~10, SF640~11, subframe SF1024~12, SF1280~13, SF2048~14, SF2560~15
DRX
Enumeration Type
SF128~6, SF160~7, SF256~8, SF320~9, SF512~10, SF640~11, subframe SF1024~12, SF1280~13, SF2048~14, SF2560~15
Interval Type
10~254
N/A
None
Enumeration Type
IMSSignalling(IMS Signalling), LowDelay(Low Delay), TCPorBuffStreamin g(TCP Based or Buffered Streaming)
IMSSignalling~5, LowDelay~7, None TCPorBuffStreamin g~9
Interval Type
1~1000
N/A
0.001
Interval Type
1~1000
N/A
0.001
Enumeration Type
MinGbrRate_0_KB( 0KB/s), MinGbrRate_1_KB( 1KB/s), MinGbrRate_2_KB( 2KB/s), MinGbrRate_4KB(4 KB/s), MinGbrRate_8_KB( 8KB/s), MinGbrRate_16_KB (16KB/s), MinGbrRate_32_KB (32KB/s), MinGbrRate_64_KB (64KB/s), MinGbrRate_128_K B(128KB/s), MinGbrRate_256_K B(256KB/s), MinGbrRate_512_K B(512KB/s)
MinGbrRate_0_KB~ 0, MinGbrRate_1_KB~ 8000, MinGbrRate_2_KB~ 16000, MinGbrRate_4KB~3 2000, MinGbrRate_8_KB~ 64000, MinGbrRate_16_KB KB/s ~128000, MinGbrRate_32_KB ~256000, MinGbrRate_64_KB ~512000, MinGbrRate_128_K B~1024000, MinGbrRate_256_K B~2048000, MinGbrRate_512_K B~4096000
Enumeration Type
Interval Type
0~10
N/A
0.1
PS Inter-RAT Mobility between EUTRAN and UTRAN PS Inter-RAT Mobility between EUTRAN and GERAN PS Inter-RAT Mobility between EUTRAN and CDMA2000 SRVCC to UTRAN SRVCC to GERAN Service based interInterval Type RAT handover to UTRAN Inter-RAT Load Sharing to GERAN Inter-RAT Load Sharing to UTRAN Service based interRAT handover to GERAN CS Fallback to UTRAN CS Fallback to GERAN CS Fallback to CDMA2000 1xRTT
0~39
N/A
None
Enumeration Type
PBR_0_KBps(0KB/ s), PBR_8_KBps(8KB/ s), PBR_16_KBps(16K B/s), PBR_32_KBps(32K B/s), PBR_64_KBps(64K B/s), PBR_128_KBps(12 8KB/s), PBR_256_KBps(25 6KB/s), PBR_INFINITY(Infin ity)
PBR_0_KBps~0, PBR_8_KBps~1, PBR_16_KBps~2, PBR_32_KBps~3, KB/s PBR_64_KBps~4, PBR_128_KBps~5, PBR_256_KBps~6, PBR_INFINITY~7
Interval Type
9~16
N/A
None
Radio Bearer Management
Interval Type
0~39
N/A
None
Enumeration Type
PAID_USER(Paid User), PAID_USER~0, FREE_USER(Free FREE_USER~1 User)
None
Transport Overbooking Transport Differentiated Flow Control Transport Resource Overload Control Enumeration Type Transport Dynamic Flow Control Different Transport Paths based on QoS Grade Intra-LTE Load Balancing
FLOW_CTRL(Flow FLOW_CTRL~0, Control), NON_FLOW_CTRL None NON_FLOW_CTRL ~1 (Non Flow Control)
PS Inter-RAT Mobility between EUTRAN and UTRAN PS Inter-RAT Mobility between EUTRAN and GERAN PS Inter-RAT Mobility between EUTRAN and CDMA2000 SRVCC to UTRAN SRVCC to GERAN Intra-LTE Load Balancing Interval Type Service based interRAT handover to UTRAN Inter-RAT Load Sharing to GERAN Inter-RAT Load Sharing to UTRAN Service based interRAT handover to GERAN CS Fallback to UTRAN CS Fallback to GERAN CS Fallback to CDMA2000 1xRTT
0~39
N/A
None
SRVCC to UTRAN PS Inter-RAT Mobility between E- Bit Field Type UTRAN and UTRAN
PS_HO, SRVCC, REDIRECTION
PS_HO~0, SRVCC~1, REDIRECTION~2
None
SRVCC to GERAN Bit Field Type
SRVCC
SRVCC~0
None
PS Inter-RAT Mobility between EBit Field Type UTRAN and GERAN
PS_HO~0, PS_HO, NACC_HO~1, NACC_HO, CCO_HO~2, CCO_HO, SRVCC, SRVCC~3, REDIRECTION REDIRECTION~4
None
PS Inter-RAT Mobility between EBit Field Type UTRAN and CDMA2000
SRVCC(CDMA1XR SRVCC~0 TTHoSwitch)
None
PS Inter-RAT Mobility between EBit Field Type UTRAN and CDMA2000
OPT_HO, NON_OPT_HO
OPT_HO~0, NON_OPT_HO~1
None
PS Inter-RAT Mobility between EUTRAN and UTRAN PS Inter-RAT Mobility between EUTRAN and GERAN PS Inter-RAT Mobility between EUTRAN and CDMA2000 SRVCC to UTRAN SRVCC to GERAN Intra-LTE Load Balancing Enumeration Type Service based interRAT handover to UTRAN Inter-RAT Load Sharing to GERAN Inter-RAT Load Sharing to UTRAN Service based interRAT handover to GERAN CS Fallback to UTRAN CS Fallback to GERAN CS Fallback to CDMA2000 1xRTT
PERMIT_HO_ENU M(Permit Ho), FORBID_HO_ENU M(Forbid Ho)
PERMIT_HO_ENU M~0, None FORBID_HO_ENU M~1
Automatic Neighbour Relation Enumeration Type (ANR) Inter-RAT ANR
PERMIT_FAST_AN PERMIT_FAST_AN R_MEAS_ENUM~0 R_MEAS_ENUM, , None FORBID_FAST_AN FORBID_FAST_AN R_MEAS_ENUM R_MEAS_ENUM~1
None
Interval Type
0~15
N/A
None
None
Interval Type
0~15
N/A
None
None
Interval Type
0~15
N/A
None
Interval Type
0~39
N/A
None
Enumeration Type
DiscardTimer_50(5 0 ms), DiscardTimer_100( 100 ms), DiscardTimer_150( 150 ms), DiscardTimer_300( 300 ms), DiscardTimer_500( 500 ms), DiscardTimer_750( 750 ms), DiscardTimer_1500 (1500 ms), DiscardTimer_Infinit y(infinity)
DiscardTimer_50~0 , DiscardTimer_100~ 1, DiscardTimer_150~ 2, DiscardTimer_300~ 3, ms DiscardTimer_500~ 4, DiscardTimer_750~ 5, DiscardTimer_1500 ~6, DiscardTimer_Infinit y~7
Enumeration Type
RlcMode_AM(Ackn owledge Mode), RlcMode_AM~1, RlcMode_UM(Un- RlcMode_UM~2 acknowledge Mode)
None
Enumeration Type
Maxretx_Threshold _t1(1), Maxretx_Threshold _t2(2), Maxretx_Threshold _t3(3), Maxretx_Threshold _t4(4), Maxretx_Threshold _t6(6), Maxretx_Threshold _t8(8), Maxretx_Threshold _t16(16), Maxretx_Threshold _t32(32)
Maxretx_Threshold _t1~0, Maxretx_Threshold _t2~1, Maxretx_Threshold _t3~2, Maxretx_Threshold _t4~3, None Maxretx_Threshold _t6~4, Maxretx_Threshold _t8~5, Maxretx_Threshold _t16~6, Maxretx_Threshold _t32~7
Enumeration Type
Maxretx_Threshold _t1(1), Maxretx_Threshold _t2(2), Maxretx_Threshold _t3(3), Maxretx_Threshold _t4(4), Maxretx_Threshold _t6(6), Maxretx_Threshold _t8(8), Maxretx_Threshold _t16(16), Maxretx_Threshold _t32(32)
Maxretx_Threshold _t1~0, Maxretx_Threshold _t2~1, Maxretx_Threshold _t3~2, Maxretx_Threshold _t4~3, None Maxretx_Threshold _t6~4, Maxretx_Threshold _t8~5, Maxretx_Threshold _t16~6, Maxretx_Threshold _t32~7
Enumeration Type
PollByte_kb25(25 kBytes), PollByte_kb50(50 kBytes), PollByte_kb75(75 kBytes), PollByte_kb100(100 kBytes), PollByte_kb125(125 kBytes), PollByte_kb250(250 kBytes), PollByte_kb375(375 kBytes), PollByte_kb500(500 kBytes), PollByte_kb750(750 kBytes), PollByte_kb1000(10 00 kBytes), PollByte_kb1250(12 50 kBytes), PollByte_kb1500(15 00 kBytes), PollByte_kb2000(20 00 kBytes), PollByte_kb3000(30 00 kBytes), PollByte_infinity(infi nite kBytes)
PollByte_kb25~0, PollByte_kb50~1, PollByte_kb75~2, PollByte_kb100~3, PollByte_kb125~4, PollByte_kb250~5, PollByte_kb375~6, PollByte_kb500~7, PollByte_kb750~8, PollByte_kb1000~9, byte PollByte_kb1250~1 0, PollByte_kb1500~1 1, PollByte_kb2000~1 2, PollByte_kb3000~1 3, PollByte_infinity~14
Enumeration Type
PollByte_kb25(25 kBytes), PollByte_kb50(50 kBytes), PollByte_kb75(75 kBytes), PollByte_kb100(100 kBytes), PollByte_kb125(125 kBytes), PollByte_kb250(250 kBytes), PollByte_kb375(375 kBytes), PollByte_kb500(500 kBytes), PollByte_kb750(750 kBytes), PollByte_kb1000(10 00 kBytes), PollByte_kb1250(12 50 kBytes), PollByte_kb1500(15 00 kBytes), PollByte_kb2000(20 00 kBytes), PollByte_kb3000(30 00 kBytes), PollByte_infinity(infi nite kBytes)
PollByte_kb25~0, PollByte_kb50~1, PollByte_kb75~2, PollByte_kb100~3, PollByte_kb125~4, PollByte_kb250~5, PollByte_kb375~6, PollByte_kb500~7, PollByte_kb750~8, PollByte_kb1000~9, byte PollByte_kb1250~1 0, PollByte_kb1500~1 1, PollByte_kb2000~1 2, PollByte_kb3000~1 3, PollByte_infinity~14
Enumeration Type
PollPdu_p4(4 PDUs), PollPdu_p8(8 PDUs), PollPdu_p16(16 PDUs), PollPdu_p32(32 PDUs), PollPdu_p64(64 PDUs), PollPdu_p128(128 PDUs), PollPdu_p256(256 PDUs), PollPdu_Infinity(infi nite PDUs)
PollPdu_p4~0, PollPdu_p8~1, PollPdu_p16~2, PollPdu_p32~3, PollPdu_p64~4, PollPdu_p128~5, PollPdu_p256~6, PollPdu_Infinity~7
None
Enumeration Type
PollPdu_p4(4 PDUs), PollPdu_p8(8 PDUs), PollPdu_p16(16 PDUs), PollPdu_p32(32 PDUs), PollPdu_p64(64 PDUs), PollPdu_p128(128 PDUs), PollPdu_p256(256 PDUs), PollPdu_Infinity(infi nite PDUs)
PollPdu_p4~0, PollPdu_p8~1, PollPdu_p16~2, PollPdu_p32~3, PollPdu_p64~4, PollPdu_p128~5, PollPdu_p256~6, PollPdu_Infinity~7
None
Enumeration Type
Tpollretrans_m5(5m s), Tpollretrans_m10(1 0ms), Tpollretrans_m15(1 5ms), Tpollretrans_m20(2 0ms), Tpollretrans_m25(2 5ms), Tpollretrans_m30(3 0ms), Tpollretrans_m35(3 5ms), Tpollretrans_m40(4 0ms), Tpollretrans_m45(4 5ms), Tpollretrans_m50(5 0ms), Tpollretrans_m55(5 5ms), Tpollretrans_m60(6 0ms), Tpollretrans_m65(6 5ms), Tpollretrans_m70(7 0ms), Tpollretrans_m75(7 5ms), Tpollretrans_m80(8 0ms), Tpollretrans_m85(8 5ms),
Tpollretrans_m5~0, Tpollretrans_m10~1 , Tpollretrans_m15~2 , Tpollretrans_m20~3 , Tpollretrans_m25~4 , Tpollretrans_m30~5 , Tpollretrans_m35~6 , Tpollretrans_m40~7 , Tpollretrans_m45~8 , ms Tpollretrans_m50~9 , Tpollretrans_m55~1 0, Tpollretrans_m60~1 1, Tpollretrans_m65~1 2, Tpollretrans_m70~1 3, Tpollretrans_m75~1 4, Tpollretrans_m80~1 5, Tpollretrans_m85~1 6, Tpollretrans_m90~1
Enumeration Type
Tpollretrans_m5(5m s), Tpollretrans_m10(1 0ms), Tpollretrans_m15(1 5ms), Tpollretrans_m20(2 0ms), Tpollretrans_m25(2 5ms), Tpollretrans_m30(3 0ms), Tpollretrans_m35(3 5ms), Tpollretrans_m40(4 0ms), Tpollretrans_m45(4 5ms), Tpollretrans_m50(5 0ms), Tpollretrans_m55(5 5ms), Tpollretrans_m60(6 0ms), Tpollretrans_m65(6 5ms), Tpollretrans_m70(7 0ms), Tpollretrans_m75(7 5ms), Tpollretrans_m80(8 0ms), Tpollretrans_m85(8 5ms),
Tpollretrans_m5~0, Tpollretrans_m10~1 , Tpollretrans_m15~2 , Tpollretrans_m20~3 , Tpollretrans_m25~4 , Tpollretrans_m30~5 , Tpollretrans_m35~6 , Tpollretrans_m40~7 , Tpollretrans_m45~8 , ms Tpollretrans_m50~9 , Tpollretrans_m55~1 0, Tpollretrans_m60~1 1, Tpollretrans_m65~1 2, Tpollretrans_m70~1 3, Tpollretrans_m75~1 4, Tpollretrans_m80~1 5, Tpollretrans_m85~1 6, Tpollretrans_m90~1
Enumeration Type
Tstatprohibit_m0(0 ms), Tstatprohibit_m5(5 ms), Tstatprohibit_m10(1 0ms), Tstatprohibit_m15(1 5ms), Tstatprohibit_m20(2 0ms), Tstatprohibit_m25(2 5ms), Tstatprohibit_m30(3 0ms), Tstatprohibit_m35(3 5ms), Tstatprohibit_m40(4 0ms), Tstatprohibit_m45(4 5ms), Tstatprohibit_m50(5 0ms), Tstatprohibit_m55(5 5ms), Tstatprohibit_m60(6 0ms), Tstatprohibit_m65(6 5ms), Tstatprohibit_m70(7 0ms), Tstatprohibit_m75(7 5ms), Tstatprohibit_m80(8 0ms),
Tstatprohibit_m0~0, Tstatprohibit_m5~1, Tstatprohibit_m10~ 2, Tstatprohibit_m15~ 3, Tstatprohibit_m20~ 4, Tstatprohibit_m25~ 5, Tstatprohibit_m30~ 6, Tstatprohibit_m35~ 7, Tstatprohibit_m40~ 8, Tstatprohibit_m45~ ms 9, Tstatprohibit_m50~ 10, Tstatprohibit_m55~ 11, Tstatprohibit_m60~ 12, Tstatprohibit_m65~ 13, Tstatprohibit_m70~ 14, Tstatprohibit_m75~ 15, Tstatprohibit_m80~ 16, Tstatprohibit_m85~ 17,
Enumeration Type
Tstatprohibit_m0(0 ms), Tstatprohibit_m5(5 ms), Tstatprohibit_m10(1 0ms), Tstatprohibit_m15(1 5ms), Tstatprohibit_m20(2 0ms), Tstatprohibit_m25(2 5ms), Tstatprohibit_m30(3 0ms), Tstatprohibit_m35(3 5ms), Tstatprohibit_m40(4 0ms), Tstatprohibit_m45(4 5ms), Tstatprohibit_m50(5 0ms), Tstatprohibit_m55(5 5ms), Tstatprohibit_m60(6 0ms), Tstatprohibit_m65(6 5ms), Tstatprohibit_m70(7 0ms), Tstatprohibit_m75(7 5ms), Tstatprohibit_m80(8 0ms),
Tstatprohibit_m0~0, Tstatprohibit_m5~1, Tstatprohibit_m10~ 2, Tstatprohibit_m15~ 3, Tstatprohibit_m20~ 4, Tstatprohibit_m25~ 5, Tstatprohibit_m30~ 6, Tstatprohibit_m35~ 7, Tstatprohibit_m40~ 8, Tstatprohibit_m45~ ms 9, Tstatprohibit_m50~ 10, Tstatprohibit_m55~ 11, Tstatprohibit_m60~ 12, Tstatprohibit_m65~ 13, Tstatprohibit_m70~ 14, Tstatprohibit_m75~ 15, Tstatprohibit_m80~ 16, Tstatprohibit_m85~ 17,
Enumeration Type
Treordering_m0(0m s), Treordering_m5(5m s), Treordering_m10(1 0ms), Treordering_m15(1 5ms), Treordering_m20(2 0ms), Treordering_m25(2 5ms), Treordering_m30(3 0ms), Treordering_m35(3 5ms), Treordering_m40(4 0ms), Treordering_m45(4 5ms), Treordering_m50(5 0ms), Treordering_m55(5 5ms), Treordering_m60(6 0ms), Treordering_m65(6 5ms), Treordering_m70(7 0ms), Treordering_m75(7 5ms), Treordering_m80(8 0ms),
Treordering_m0~0, Treordering_m5~1, Treordering_m10~2 , Treordering_m15~3 , Treordering_m20~4 , Treordering_m25~5 , Treordering_m30~6 , Treordering_m35~7 , Treordering_m40~8 , Treordering_m45~9 ms , Treordering_m50~1 0, Treordering_m55~1 1, Treordering_m60~1 2, Treordering_m65~1 3, Treordering_m70~1 4, Treordering_m75~1 5, Treordering_m80~1 6, Treordering_m85~1 7,
Enumeration Type
Enumeration Type
PdcpSnsize_7bits(7 bits), PdcpSnsize_12bits( 12 bits)
PdcpSnsize_7bits~ 0, bit PdcpSnsize_12bits ~1
Enumeration Type
RlcSnSize_size5(5b RlcSnSize_size5~0, its), RlcSnSize_size10~ bit RlcSnSize_size10(1 1 0bits)
Enumeration Type
RlcSnSize_size5(5b RlcSnSize_size5~0, its), RlcSnSize_size10~ bit RlcSnSize_size10(1 1 0bits)
Enumeration Type
Enumeration Type
Enumeration Type
Enumeration Type
None
Interval Type
1~1000
N/A
0.001
Interval Type
1~1000
N/A
0.001
Enumeration Type
Enumeration Type
Interval Type
0~10
N/A
0.1
PS Inter-RAT Mobility between EUTRAN and UTRAN PS Inter-RAT Mobility between EUTRAN and GERAN PS Inter-RAT Mobility between EUTRAN and CDMA2000 SRVCC to UTRAN SRVCC to GERAN Service based interInterval Type RAT handover to UTRAN Inter-RAT Load Sharing to GERAN Inter-RAT Load Sharing to UTRAN Service based interRAT handover to GERAN CS Fallback to UTRAN CS Fallback to GERAN CS Fallback to CDMA2000 1xRTT Basic Scheduling Enhanced Scheduling
0~39
N/A
None
Interval Type
0~39
N/A
None
Enumeration Type
PBR_0_KBps(0KB/ s), PBR_8_KBps(8KB/ s), PBR_16_KBps(16K B/s), PBR_32_KBps(32K B/s), PBR_64_KBps(64K B/s), PBR_128_KBps(12 8KB/s), PBR_256_KBps(25 6KB/s), PBR_INFINITY(Infin ity)
PBR_0_KBps~0, PBR_8_KBps~1, PBR_16_KBps~2, PBR_32_KBps~3, KB/s PBR_64_KBps~4, PBR_128_KBps~5, PBR_256_KBps~6, PBR_INFINITY~7
Interval Type
9~16
N/A
None
Transport Overbooking Transport Differentiated Flow Control Transport Resource Overload Control Enumeration Type Transport Dynamic Flow Control Different Transport Paths based on QoS Grade Intra-LTE Load Balancing
FLOW_CTRL(Flow FLOW_CTRL~0, Control), NON_FLOW_CTRL None NON_FLOW_CTRL ~1 (Non Flow Control)
Dynamic Scheduling
Enumeration Type
CLASS_0(CLASS_ 0), CLASS_0~0, CLASS_1(CLASS_ CLASS_1~1, 1), CLASS_2~2 CLASS_2(CLASS_ 2)
None
DRX DL 2x2 MIMO DL 4x2 MIMO BEAMFORMING AND MIMO ADAPTIVE SWITCH (Test Feature)
Enumeration Type
NO_ADAPTIVE(NO _ADAPTIVE), TxD_BF_ADAPTIV E(TxD_BF_ADAPTI VE), MIMO_BF_ADAPTI VE(MIMO_BF_ADA PTIVE)
NO_ADAPTIVE~0, TxD_BF_ADAPTIV E~1, None MIMO_BF_ADAPTI VE~2
DRX DL 2x2 MIMO DL 4x2 MIMO BEAMFORMING AND MIMO ADAPTIVE SWITCH (Test Feature)
Enumeration Type
TM2(TM2), TM3(TM3), TM7(TM7), TM8(TM8), TM4(TM4)
TM2~0, TM3~1, TM7~2, TM8~3, TM4~4
None
Basic Scheduling
Enumeration Type
OFF(Off), ON(On)
OFF~0, ON~1
None
Basic Scheduling
Enumeration Type
ms2(2ms), ms5(5ms), ms10(10ms), ms20(20ms), ms32(32ms), ms40(40ms), ms64(64ms), ms80(80ms), ms128(128ms), ms160(160ms)
ms2~2, ms5~5, ms10~10, ms20~20, ms32~32, ms40~40, ms64~64, ms80~80, ms128~128, ms160~160
ms
DL 2x2 MIMO DL 4x2 MIMO
Enumeration Type
NO_ADAPTIVE(NO _ADAPTIVE), OL_ADAPTIVE(OL _ADAPTIVE), CL_ADAPTIVE(CL_ ADAPTIVE), OC_ADAPTIVE(OC _ADAPTIVE)
NO_ADAPTIVE~0, OL_ADAPTIVE~1, None CL_ADAPTIVE~2, OC_ADAPTIVE~3
DL 2x2 MIMO DL 4x2 MIMO
Enumeration Type
TM2(TM2), TM3(TM3), TM4(TM4), TM6(TM6)
TM2~0, TM3~1, TM4~2, TM6~3
None
Basic Scheduling
Enumeration Type
OFF(Off), ON(On)
OFF~0, ON~1
None
Basic Scheduling
Enumeration Type
ms5(5ms), ms10(10ms), ms20(20ms), ms40(40ms)
ms5~1, ms10~2, ms20~3, ms40~4
ms
None
Enumeration Type
None
None
Enumeration Type
None
Enumeration Type
TPeriodBSRTimer_ sf5(5 subframes), TPeriodBSRTimer_ sf10(10 subframes), TPeriodBSRTimer_ sf16(16 subframes), TPeriodBSRTimer_ sf20(20 subframes), TPeriodBSRTimer_ sf32(32 subframes), TPeriodBSRTimer_ sf40(40 subframes), TPeriodBSRTimer_ sf64(64 subframes), TPeriodBSRTimer_ sf80(80 subframes), TPeriodBSRTimer_ sf128(128 subframes), TPeriodBSRTimer_ sf160(160 subframes), TPeriodBSRTimer_ sf320(320 subframes), TPeriodBSRTimer_ sf640(640 subframes), TPeriodBSRTimer_ sf1280(1280 subframes), TPeriodBSRTimer_ sf2560(2560 subframes), sf320(sf320), sf640(sf640), sf1280(sf1280), sf2560(sf2560), sf5120(sf5120), sf10240(sf10240)
TPeriodBSRTimer_ sf5~0, TPeriodBSRTimer_ sf10~1, TPeriodBSRTimer_ sf16~2, TPeriodBSRTimer_ sf20~3, TPeriodBSRTimer_ sf32~4, TPeriodBSRTimer_ sf40~5, TPeriodBSRTimer_ sf64~6, TPeriodBSRTimer_ subframe sf80~7, TPeriodBSRTimer_ sf128~8, TPeriodBSRTimer_ sf160~9, TPeriodBSRTimer_ sf320~10, TPeriodBSRTimer_ sf640~11, TPeriodBSRTimer_ sf1280~12, TPeriodBSRTimer_ sf2560~13, TPeriodBSRTimer_i nfinity~14
sf320~0, sf640~1, sf1280~2, sf2560~3, sf5120~4, sf10240~5
subframe
Coverage Based Inter-frequency Handover PS Inter-RAT Mobility between EUTRAN and UTRAN PS Inter-RAT Mobility between E- Enumeration Type UTRAN and GERAN PS Inter-RAT Mobility between EUTRAN and CDMA2000 SRVCC to UTRAN SRVCC to GERAN
GAP_PATTERN_T YPE_1, GAP_PATTERN_T YPE_2
GAP_PATTERN_T YPE_1~1, None GAP_PATTERN_T YPE_2~2
Enumeration Type
FC0~0, FC1~1, FC2~2, FC3~3, FC0, FC1, FC2, FC4~4, FC5~5, FC3, FC4, FC5, FC6~6, FC7~7, FC6, FC7, FC8, FC8~8, FC9~9, None FC9, FC11, FC13, FC11~10, FC15, FC17, FC19 FC13~11, FC15~12, FC17~13, FC19~14
Enumeration Type
PS Inter-RAT Mobility between EUTRAN and GERAN Enumeration Type SRVCC to GERAN CS Fallback to GERAN
Coverage Based Intra-frequency Handover Coverage Based Inter-frequency Handover SRVCC to GERAN PS Inter-RAT Mobility between EUTRAN and Enumeration Type UTRAN PS Inter-RAT Mobility between EUTRAN and GERAN PS Inter-RAT Mobility between EUTRAN and CDMA2000 SRVCC to UTRAN
NOT_CFG, CFG
NOT_CFG~0, CFG~1
None
Coverage Based Intra-frequency Handover Coverage Based Inter-frequency Handover PS Inter-RAT Mobility between EUTRAN and UTRAN Interval Type PS Inter-RAT Mobility between EUTRAN and GERAN PS Inter-RAT Mobility between EUTRAN and CDMA2000 SRVCC to UTRAN
-141~-43
N/A
dBm
High Speed Mobility Ultra High Speed Enumeration Type Mobility
NOT_CFG, CFG
NOT_CFG~0, CFG~1
None
T_CRMAX_30S(30 s), T_CRMAX_60S(60 s), T_CRMAX_120S(1 20s), T_CRMAX_180S(1 80s), T_CRMAX_240S(2 40s)
T_CRMAX_30S~0, T_CRMAX_60S~1, T_CRMAX_120S~2 , s T_CRMAX_180S~3 , T_CRMAX_240S~4
T_CRMAXHYST_3 0S(30s), T_CRMAXHYST_6 0S(60s), T_CRMAXHYST_1 20S(120s), T_CRMAXHYST_1 80S(180s), T_CRMAXHYST_2 40S(240s)
T_CRMAXHYST_3 0S~0, T_CRMAXHYST_6 0S~1, T_CRMAXHYST_1 s 20S~2, T_CRMAXHYST_1 80S~3, T_CRMAXHYST_2 40S~4
High Speed Mobility Interval Type
1~16
N/A
None
High Speed Mobility Ultra High Speed Interval Type Mobility
1~16
N/A
None
High Speed Mobility Enumeration Type
TTT_SF_MEDIUM_ 0DOT25(0.25), TTT_SF_MEDIUM_ 0DOT50(0.5), TTT_SF_MEDIUM_ 0DOT75(0.75), TTT_SF_MEDIUM_ LDOT0(1)
TTT_SF_MEDIUM_ 0DOT25~0, TTT_SF_MEDIUM_ 0DOT50~1, None TTT_SF_MEDIUM_ 0DOT75~2, TTT_SF_MEDIUM_ LDOT0~3
TTT_SF_HIGH_0D OT25(0.25), TTT_SF_HIGH_0D OT50(0.5), TTT_SF_HIGH_0D OT75(0.75), TTT_SF_HIGH_LD OT0(1)
TTT_SF_HIGH_0D OT25~0, TTT_SF_HIGH_0D OT50~1, None TTT_SF_HIGH_0D OT75~2, TTT_SF_HIGH_LD OT0~3
PS Inter-RAT Mobility between EUTRAN and UTRAN Enumeration Type SRVCC to UTRAN CS Fallback to UTRAN
PS Inter-RAT Mobility between EUTRAN and UTRAN Enumeration Type SRVCC to UTRAN CS Fallback to UTRAN
PS Inter-RAT Handover between LTE and GERAN / PS Inter-RAT Mobility between EUTRAN and GERAN SRVCC to GERAN PS Inter-RAT Handover between LTE and Interval Type CDMA2000 PS Inter-RAT Handover between LTE and UMTS / PS Inter-RAT Mobility between EUTRAN and UTRAN SRVCC to UMTS / SRVCC to UTRAN
1~8
N/A
None
PS Inter-RAT Mobility between EUTRAN and GERAN SRVCC to GERAN PS Inter-RAT Mobility between EUTRAN and CDMA2000 PS Inter-RAT Enumeration Type Mobility between EUTRAN and UTRAN SRVCC to UTRAN Service based interRAT handover to UTRAN Service based interRAT handover to GERAN
r1(1), r2(2), r4(4), r8(8), r16(16), r32(32), r64(64), Infinity(Infinity)
r1~0, r2~1, r4~2, r8~3, r16~4, r32~5, None r64~6, Infinity~7
PS Inter-RAT Mobility between EUTRAN and GERAN Enumeration Type SRVCC to GERAN Service based interRAT handover to GERAN
120ms~0, 240ms~1, 480ms~2, 120ms, 240ms, 640ms~3, 480ms, 640ms, 1024ms~4, 1024ms, 2048ms, 2048ms~5, 5120ms, 10240ms, 5120ms~6, 1min, 6min, 12min, 10240ms~7, 30min, 60min 1min~8, 6min~9, 12min~10, 30min~11, 60min~12
None
PS Inter-RAT Handover between LTE and UMTS / PS Inter-RAT Mobility between E- Enumeration Type UTRAN and UTRAN SRVCC to UMTS / SRVCC to UTRAN
UTRAN_RSCP, UTRAN_ECN0, UTRAN_BOTH
UTRAN_RSCP~0, UTRAN_ECN0~1, UTRAN_BOTH~2
None
PS Inter-RAT Mobility between EUTRAN and UTRAN Enumeration Type SRVCC to UTRAN Service based interRAT handover to UTRAN
None
PILOT_STRENGTH PILOT_STRENGTH ~0, , PILOT_PN_PHASE None PILOT_PN_PHASE _AND_STRENGTH _AND_STRENGTH ~1
None
PILOT_STRENGTH
PILOT_STRENGTH None ~0
None
PS Inter-RAT Mobility between EUTRAN and GERAN SRVCC to GERAN PS Inter-RAT Mobility between EEnumeration Type UTRAN and CDMA2000 PS Inter-RAT Mobility between EUTRAN and UTRAN SRVCC to UTRAN
RSRP, RSRQ, BOTH
RSRP~0, RSRQ~1, None BOTH~2
PS Inter-RAT Mobility between EUTRAN and GERAN SRVCC to GERAN PS Inter-RAT Mobility between EEnumeration Type UTRAN and CDMA2000 PS Inter-RAT Mobility between EUTRAN and UTRAN SRVCC to UTRAN
EventB1(EventB1), EventB1~0, EventB2(EventB2) EventB2~1
None
Interval Type
1~8
N/A
None
Coverage Based Intra-frequency Handover Coverage Based Inter-frequency Handover Intra-LTE Load Balancing
Enumeration Type
Enumeration Type
RSRP, RSRQ
RSRP~0, RSRQ~1 None
Enumeration Type
SAME_AS_TRIG_ QUAN(Same as Trig Quan), BOTH
SAME_AS_TRIG_ None QUAN~0, BOTH~1
Coverage Based Intra-frequency Handover Intra-LTE Load Balancing
Enumeration Type
None
Coverage Based Inter-frequency Handover Intra-LTE Load Balancing
Enumeration Type
Coverage Based Inter-frequency Handover Intra-LTE Load Balancing
Enumeration Type
None
Enumeration Type
RSRP, RSRQ, BOTH
Enumeration Type
RSRP, RSRQ, BOTH
Enumeration Type
RSRP, RSRQ, BOTH
Interval Type
0~17
N/A
None
CS Fallback to UTRAN
Enumeration Type
ms
CS Fall Back to GERAN
Enumeration Type
ms
CS Fallback to Enumeration Type CDMA2000 1xRTT
ms
Interval Type
-120~-25
N/A
dBm
Interval Type
-48~0
N/A
0.5dB
CS Fall Back to GERAN
Interval Type
-110~-48
N/A
dBm
CS Fallback to Interval Type CDMA2000 1xRTT
-63~0
N/A
0.5dB
Interval Type
0~17
N/A
None
3GPP R8 Specifications Enumeration Type Broadcast of system information
NOT_CFG(Not configure), CFG(Configure)
NOT_CFG~0, CFG~1
None
Emergency Call
Enumeration Type
BOOLEAN_FALSE( False), BOOLEAN_TRUE( True)
BOOLEAN_FALSE ~0, None BOOLEAN_TRUE~ 1
NOT_CFG~0, CFG~1
None
P00(0%), P05(5%), P10(10%), P15(15%), P20(20%), P25(25%), P30(30%), P40(40%), P50(50%), P60(60%), P70(70%), P75(75%), P80(80%), P85(85%), P90(90%), P95(95%)
P00~0, P05~1, P10~2, P15~3, P20~4, P25~5, P30~6, P40~7, P50~8, P60~9, P70~10, P75~11, P80~12, P85~13, P90~14, P95~15
ACCESS_BARRIN G_TIME_S4(4s), ACCESS_BARRIN G_TIME_S8(8s), ACCESS_BARRIN G_TIME_S16(16s), ACCESS_BARRIN G_TIME_S32(32s), ACCESS_BARRIN G_TIME_S64(64s), ACCESS_BARRIN G_TIME_S128(128 s), ACCESS_BARRIN G_TIME_S256(256 s), ACCESS_BARRIN G_TIME_S512(512 s)
ACCESS_BARRIN G_TIME_S4~0, ACCESS_BARRIN G_TIME_S8~1, ACCESS_BARRIN G_TIME_S16~2, ACCESS_BARRIN G_TIME_S32~3, s ACCESS_BARRIN G_TIME_S64~4, ACCESS_BARRIN G_TIME_S128~5, ACCESS_BARRIN G_TIME_S256~6, ACCESS_BARRIN G_TIME_S512~7
NOT_CFG~0, CFG~1
None
P00(0%), P05(5%), P10(10%), P15(15%), P20(20%), P25(25%), P30(30%), P40(40%), P50(50%), P60(60%), P70(70%), P75(75%), P80(80%), P85(85%), P90(90%), P95(95%)
P00~0, P05~1, P10~2, P15~3, P20~4, P25~5, P30~6, P40~7, P50~8, P60~9, P70~10, P75~11, P80~12, P85~13, P90~14, P95~15
ACCESS_BARRIN G_TIME_S4(4s), ACCESS_BARRIN G_TIME_S8(8s), ACCESS_BARRIN G_TIME_S16(16s), ACCESS_BARRIN G_TIME_S32(32s), ACCESS_BARRIN G_TIME_S64(64s), ACCESS_BARRIN G_TIME_S128(128 s), ACCESS_BARRIN G_TIME_S256(256 s), ACCESS_BARRIN G_TIME_S512(512 s)
ACCESS_BARRIN G_TIME_S4~0, ACCESS_BARRIN G_TIME_S8~1, ACCESS_BARRIN G_TIME_S16~2, ACCESS_BARRIN G_TIME_S32~3, s ACCESS_BARRIN G_TIME_S64~4, ACCESS_BARRIN G_TIME_S128~5, ACCESS_BARRIN G_TIME_S256~6, ACCESS_BARRIN G_TIME_S512~7
Interval Type
0~17
N/A
None
3GPP R8 Specifications Broadcast of Enumeration Type system information Cell Selection and Re-selection
CELL_BARRED(Ba CELL_BARRED~0, rred), CELL_NOT_BARR None CELL_NOT_BARR ED~1 ED(Not Barred)
CELL_RESERVED( Reserved), CELL_NOT_RESE RVED(Not Reserved)
CELL_RESERVED ~0, None CELL_NOT_RESE RVED~1
ALLOWED, NOT_ALLOWED
ALLOWED~0, None NOT_ALLOWED~1
NORMAL_MODE(N ormal mode), NORMAL_MODE~0 None RR_MODE(Round , RR_MODE~1 Robin Mode)
3GPP R8 Specifications Broadcast of Interval Type system information Cell Selection and Re-selection
1~720
N/A
Interval Type
0~17
N/A
None
0~65535
N/A
None
CELL_RESERVED _FOR_OP(Reserve d), CELL_NOT_RESE RVED_FOR_OP(N ot Reserved)
CELL_RESERVED _FOR_OP~0, None CELL_NOT_RESE RVED_FOR_OP~1
1~100
N/A
1~100
N/A
None
Interval Type
0~3
N/A
None
Interval Type
0~17
N/A
None
DB0_Q_HYST(0dB) , DB1_Q_HYST(1dB) , DB2_Q_HYST(2dB) , DB3_Q_HYST(3dB) , DB4_Q_HYST(4dB) , DB5_Q_HYST(5dB) , DB6_Q_HYST(6dB) , DB8_Q_HYST(8dB) , DB10_Q_HYST(10 dB), DB12_Q_HYST(12 dB), DB14_Q_HYST(14 dB), DB16_Q_HYST(16 dB), DB18_Q_HYST(18 dB), DB20_Q_HYST(20 dB), DB22_Q_HYST(22 dB), DB24_Q_HYST(24 dB)
DB0_Q_HYST~0, DB1_Q_HYST~1, DB2_Q_HYST~2, DB3_Q_HYST~3, DB4_Q_HYST~4, DB5_Q_HYST~5, DB6_Q_HYST~6, DB8_Q_HYST~7, DB10_Q_HYST~8, DB12_Q_HYST~9, DB14_Q_HYST~10 dB , DB16_Q_HYST~11 , DB18_Q_HYST~12 , DB20_Q_HYST~13 , DB22_Q_HYST~14 , DB24_Q_HYST~15
NOT_CFG~0, CFG~1
None
S30_T_EVALULATI ON(30s), S60_T_EVALULATI ON(60s), S120_T_EVALULA TION(120s), S180_T_EVALULA TION(180s), S240_T_EVALULA TION(240s)
S30_T_EVALULATI ON~0, S60_T_EVALULATI ON~1, S120_T_EVALULA s TION~2, S180_T_EVALULA TION~3, S240_T_EVALULA TION~4
S30_T_HYST_NOR MAL(30s), S60_T_HYST_NOR MAL(60s), S120_T_HYST_NO RMAL(120s), S180_T_HYST_NO RMAL(180s), S240_T_HYST_NO RMAL(240s)
S30_T_HYST_NOR MAL~0, S60_T_HYST_NOR MAL~1, S120_T_HYST_NO s RMAL~2, S180_T_HYST_NO RMAL~3, S240_T_HYST_NO RMAL~4
1~16
N/A
None
1~16
N/A
None
DB_6_Q_HYST_SF _MEDIUM(-6dB), DB_4_Q_HYST_SF _MEDIUM(-4dB), DB_2_Q_HYST_SF _MEDIUM(-2dB), DB0_Q_HYST_SF_ MEDIUM(0dB)
DB_6_Q_HYST_SF _MEDIUM~0, DB_4_Q_HYST_SF _MEDIUM~1, dB DB_2_Q_HYST_SF _MEDIUM~2, DB0_Q_HYST_SF_ MEDIUM~3
DB_6_Q_HYST_SF _HIGH(-6dB), DB_4_Q_HYST_SF _HIGH(-4dB), DB_2_Q_HYST_SF _HIGH(-2dB), DB0_Q_HYST_SF_ HIGH(0dB)
DB_6_Q_HYST_SF _HIGH~0, DB_4_Q_HYST_SF _HIGH~1, dB DB_2_Q_HYST_SF _HIGH~2, DB0_Q_HYST_SF_ HIGH~3
NOT_CFG~0, CFG~1
None
0~31
N/A
2dB
0~31
N/A
2dB
3GPP R8 Specifications Broadcast of Interval Type system information Cell Selection and Reselection
0~7
N/A
None
-70~-22
N/A
2dBm
NOT_CFG~0, CFG~1
None
-30~33
N/A
dBm
NOT_CFG~0, CFG~1
None
0~31
N/A
2dB
NOT_CFG~0, CFG~1
None
MBW6(1.4M), MBW15(3M), MBW25(5M), MBW50(10M), MBW75(15M), MBW100(20M)
MBW6~0, MBW15~1, MBW25~2, MBW50~3, MBW75~4, MBW100~5
MHz
0~7
N/A
NOT_CFG~0, CFG~1
None
T_RESEL_SF_0DO T25(0.25), T_RESEL_SF_0DO T5(0.5), T_RESEL_SF_0DO T75(0.75), T_RESEL_SF_1DO T0(1.0)
T_RESEL_SF_0DO T25~0, T_RESEL_SF_0DO T5~1, None T_RESEL_SF_0DO T75~2, T_RESEL_SF_1DO T0~3
BitString00(00), BitString01(01), BitString10(10), BitString11(11)
BitString00~0, BitString01~1, BitString10~2, BitString11~3
None
Broadcast of system information Interval Type Cell Selection and Re-selection
0~31
N/A
dB
0~31
N/A
dB
Broadcast of system information Enumeration Type Cell Selection and Re-selection
NOT_CFG~0, CFG~1
None
0~31
N/A
dB
NOT_CFG~0, CFG~1
None
-34~-3
N/A
dB
Interval Type
0~17
N/A
None
NOT_CFG~0, CFG~1
None
NOT_CFG~0, CFG~1
None
0~15
N/A
None
NOT_CFG~0, CFG~1
None
NOT_CFG~0, CFG~1
None
0~255
N/A
None
NOT_CFG~0, CFG~1
None
0~255
N/A
None
NOT_CFG~0, CFG~1
None
0~255
N/A
None
0~7
N/A
NOT_CFG~0, CFG~1
None
NOT_CFG~0, CFG~1
None
3GPP R8 Specifications Broadcast of system information Enumeration Type Cell Selection and Reselection CS Fallback to CDMA2000 1xRTT
NOT_CFG~0, CFG~1
None
3GPP R8 Specifications Broadcast of system information Interval Type Cell Selection and Re-selection CS Fallback to CDMA2000 1xRTT
0~32767
N/A
None
0~65535
N/A
None
3GPP R8 Specifications Broadcast of system information Enumeration Type Cell Selection and Re-selection CS Fallback to CDMA2000 1xRTT
0~127
N/A
None
0~4095
N/A
None
0~7
N/A
None
0~7
N/A
None
NOT_CFG~0, CFG~1
None
3GPP R8 Specifications Broadcast of Character String system information Type Cell Selection and Re-selection
0~6 characters
N/A
None
NOT_CFG~0, CFG~1
None
0~7
N/A
NOT_CFG~0, CFG~1
None
NOT_CFG~0, CFG~1
None
NOT_CFG~0, CFG~1
None
3GPP R9 Specifications Broadcast of system information Interval Type Cell Selection and Re-selection CS Fall Back to 1x RTT
0~63
N/A
None
0~7
N/A
None
0~7
N/A
None
0~7
N/A
None
0~7
N/A
None
0~7
N/A
None
0~7
N/A
None
0~7
N/A
None
0~7
N/A
None
0~7
N/A
None
Interval Type
0~17
N/A
None
0~7
N/A
3GPP R8 Specifications Broadcast of system information Enumeration Type Cell Selection and Re-selection Mobility Management
NOT_CFG~0, CFG~1
None
Interval Type
0~17
N/A
None
0~7
N/A
NOT_CFG~0, CFG~1
None
Interval Type
0~17
N/A
None
-70~-22
N/A
2dBm
0~8
N/A
2dB
-34~-3
N/A
dB
NOT_CFG~0, CFG~1
None
1~8
N/A
dB
Interval Type
0~17
N/A
None
RF8(8 radio frames), RF16(16 radio frames), RF32(32 radio frames), RF64(64 radio frames), RF128(128 radio frames), RF256(256 radio frames), RF512(512 radio frames)
RF8~0, RF16~1, RF32~2, RF64~3, None RF128~4, RF256~5, RF512~6
3GPP R8 Specifications Interval Type Broadcast of system information
1~300
N/A
MERGE, DISCARD
MERGE~0, DISCARD~1
None
MERGE, DISCARD
MERGE~0, DISCARD~1
None
Interval Type
0~17
N/A
None
3GPP R8 Specifications Broadcast of Enumeration Type system information Uplink Power Control
AL0(0), AL04(0.4), AL05(0.5), AL06(0.6), AL07(0.7), AL08(0.8), AL09(0.9), AL1(1)
AL0~0, AL04~1, AL05~2, AL06~3, AL07~4, AL08~5, AL09~6, AL1~7
None
3GPP R8 Specifications Broadcast of Interval Type system information Uplink Power Control
-127~-96
N/A
dBm
-126~24
N/A
dBm
DELTAF_2(-2dB), DELTAF0(0dB), DELTAF2(2dB)
DELTAF_2~0, DELTAF0~1, DELTAF2~2
dB
DELTAF1(1dB), DELTAF3(3dB), DELTAF5(5dB)
DELTAF1~0, DELTAF3~1, DELTAF5~2
dB
DELTAF_2(-2dB), DELTAF0(0dB), DELTAF1(1dB), DELTAF2(2dB)
DELTAF_2~0, DELTAF0~1, DELTAF1~2, DELTAF2~3
dB
dB
dB
-1~6
N/A
2dB
Interval Type
0~17
N/A
None
SF500(), SF750(), SF1280(), SF1920(), SF2560(), SF5120(), SF10240(), INFINITY()
SF500~0, SF750~1, SF1280~2, SF1920~3, SF2560~4, None SF5120~5, SF10240~6, INFINITY~7
Interval Type
0~17
N/A
None
MS100_T300(100m s), MS200_T300(200m s), MS300_T300(300m s), MS400_T300(400m s), MS600_T300(600m s), MS1000_T300(100 0ms), MS1500_T300(150 0ms), MS2000_T300(200 0ms)
MS100_T300~0, MS200_T300~1, MS300_T300~2, MS400_T300~3, MS600_T300~4, MS1000_T300~5, MS1500_T300~6, MS2000_T300~7
ms
MS100_T301(100m s), MS200_T301(200m s), MS300_T301(300m s), MS400_T301(400m s), MS600_T301(600m s), MS1000_T301(100 0ms), MS1500_T301(150 0ms), MS2000_T301(200 0ms)
MS100_T301~0, MS200_T301~1, MS300_T301~2, MS400_T301~3, MS600_T301~4, MS1000_T301~5, MS1500_T301~6, MS2000_T301~7
ms
MS0_T310(0ms), MS50_T310(50ms), MS100_T310(100m s), MS200_T310(200m s), MS500_T310(500m s), MS1000_T310(100 0ms), MS2000_T310(200 0ms)
MS0_T310~0, MS50_T310~1, MS100_T310~2, MS200_T310~3, MS500_T310~4, MS1000_T310~5, MS2000_T310~6
ms
MS1000_T311(100 0ms), MS3000_T311(300 0ms), MS5000_T311(500 0ms), MS10000_T311(10 000ms), MS15000_T311(15 000ms), MS20000_T311(20 000ms), MS30000_T311(30 000ms)
MS1000_T311~0, MS3000_T311~1, MS5000_T311~2, MS10000_T311~3, ms MS15000_T311~4, MS20000_T311~5, MS30000_T311~6
3GPP R8 Specifications Enumeration Type Broadcast of system information 3GPP R8 Specifications Enumeration Type Broadcast of system information
n1(1), n2(2), n3(3), n4(4), n5(5), n6(6), n8(8), n10(10)
n1~0, n2~1, n3~2, n4~3, n5~4, n6~5, n8~6, n10~7
None
n1(1), n2(2), n3(3), n4(4), n6(6), n8(8), n10(10), n20(20)
n1~0, n2~1, n3~2, n4~3, n6~4, n8~5, n10~6, n20~7
None
None
Interval Type
0~17
N/A
None
None
1~99 characters
N/A
None
None
Interval Type
0~17
N/A
None
Broadcast of Enumeration Type system information
Broadcast of system information CP length Enumeration Type Normal CP Extended CP
NORMAL_CP(Norm al), NORMAL_CP~0, None EXTENDED_CP(Ex EXTENDED_CP~1 tended)
CP length Normal CP Extended CP
Enumeration Type
NORMAL_CP(Norm al), NORMAL_CP~0, None EXTENDED_CP(Ex EXTENDED_CP~1 tended)
Broadcast of system information 3GPP R9 Interval Type Specifications 3GPP R10 Specifications
1~43,61~64
N/A
None
NOT_CFG~0, CFG~1
None
18000~45589,6443 N/A 6~65535
None
0~45589,64436~65 N/A 535
None
Scalable Bandwidth Broadcast of Enumeration Type system information
CELL_BW_N6(1.4 M), CELL_BW_N15(3M ), CELL_BW_N25(5M ), CELL_BW_N50(10 M), CELL_BW_N75(15 M), CELL_BW_N100(2 0M)
CELL_BW_N6~0, CELL_BW_N15~1, CELL_BW_N25~2, None CELL_BW_N50~3, CELL_BW_N75~4, CELL_BW_N100~5
Scalable Bandwidth Broadcast of Enumeration Type system information
CELL_BW_N6(1.4 M), CELL_BW_N15(3M ), CELL_BW_N25(5M ), CELL_BW_N50(10 M), CELL_BW_N75(15 M), CELL_BW_N100(2 0M)
CELL_BW_N6~0, CELL_BW_N15~1, CELL_BW_N25~2, None CELL_BW_N50~3, CELL_BW_N75~4, CELL_BW_N100~5
Broadcast of Interval Type system information
0~255
N/A
None
0~503
N/A
None
1~32
N/A
None
None
Enumeration Type
CELL_DEACTIVE( Deactivated), CELL_DEACTIVE~ None CELL_ACTIVE(Acti 0, CELL_ACTIVE~1 ve) CELL_UNBLOCK(U nblock), CELL_HIGH_BLOC K(High block), CELL_MIDDLE_BL OCK(Middle block), CELL_LOW_BLOC K(Low block) CELL_UNBLOCK~ 0, CELL_HIGH_BLOC K~1, None CELL_MIDDLE_BL OCK~2, CELL_LOW_BLOC K~3
None
Enumeration Type
None
Interval Type
1~1440
N/A
min
CELL_FDD(FDD), CELL_TDD(TDD)
CELL_FDD~0, CELL_TDD~1
None
Broadcast of system information uplink-downlink subframe configuration Enumeration Type type1&2 uplink-downlink subframe configuration type 0/5
SA0(SA0), SA1(SA1), SA2(SA2), SA3(SA3), SA4(SA4), SA5(SA5), SA6(SA6)
SA0~0, SA1~1, SA2~2, SA3~3, SA4~4, SA5~5, SA6~6
None
Broadcast of system information uplink-downlink special subframe configuration type 7 uplink-downlink Enumeration Type special subframe configuration type 4 uplink-downlink special subframe configuration type 5
SSP0(SSP0), SSP1(SSP1), SSP2(SSP2), SSP3(SSP3), SSP4(SSP4), SSP5(SSP5), SSP6(SSP6), SSP7(SSP7), SSP8(SSP8)
SSP0~0, SSP1~1, SSP2~2, SSP3~3, SSP4~4, SSP5~5, SSP6~6, SSP7~7, SSP8~8
None
None
Enumeration Type
dB-24(-24dB), dB22(-22dB), dB-20(20dB), dB-18(18dB), dB-16(16dB), dB-14(14dB), dB-12(12dB), dB-10(10dB), dB-8(-8dB), dB-6(-6dB), dB-5(5dB), dB-4(-4dB), dB-3(-3dB), dB-2(2dB), dB-1(-1dB), dB0(0dB), dB1(1dB), dB2(2dB), dB3(3dB), dB4(4dB), dB5(5dB), dB6(6dB), dB8(8dB), dB10(10dB), dB12(12dB), dB14(14dB), dB16(16dB), dB18(18dB), dB20(20dB), dB22(22dB), dB24(24dB)
dB-24~0, dB-22~1, dB-20~2, dB-18~3, dB-16~4, dB-14~5, dB-12~6, dB-10~7, dB-8~8, dB-6~9, dB5~10, dB-4~11, dB3~12, dB-2~13, dB1~14, dB0~15, dB dB1~16, dB2~17, dB3~18, dB4~19, dB5~20, dB6~21, dB8~22, dB10~23, dB12~24, dB14~25, dB16~26, dB18~27, dB20~28, dB22~29, dB24~30
None
Enumeration Type
Random Access Procedure
Interval Type
0~837
N/A
None
LOW_SPEED(Low speed cell flag), HIGH_SPEED(High speed cell flag), ULTRA_HIGH_SPE ED(Ultra high speed cell flag), EXTRA_HIGH_SPE ED(Extra high speed cell flag)
LOW_SPEED~0, HIGH_SPEED~1, ULTRA_HIGH_SPE None ED~2, EXTRA_HIGH_SPE ED~3
Interval Type
0~4
N/A
None
Interval Type
1~100000
N/A
Compact Bandwidth Enumeration Type
NOT_CFG~0, CFG~1
None
Compact Bandwidth Interval Type
48~50,96~100,146~ N/A 150,183~200
0.1MHz
Compact Bandwidth Interval Type
48~50,96~100,146~ N/A 150,183~200
0.1MHz
NOT_CFG~0, CFG~1
None
0~16777215
N/A
None
NOT_CFG~0, CFG~1
None
-30~36
N/A
dBm
SFN
Enumeration Type
BOOLEAN_FALSE( False), BOOLEAN_TRUE( True) SFN(SFN), CELL_COMBINATI ON(Cell Combination), TWO_RRU_COMBI NATION(TWO RRU Combination), DIGITAL_COMBIN ATION(Cell Digital Combination) NO_COMPRESSIO N(No Compression), NORMAL_COMPR ESSION(Normal Compression)
SFN
Enumeration Type
SFN~0, CELL_COMBINATI ON~1, TWO_RRU_COMBI None NATION~2, DIGITAL_COMBIN ATION~3
None
Enumeration Type
NO_COMPRESSIO N~0, None NORMAL_COMPR ESSION~1
None
Enumeration Type
CELL_INST_UNIN STALL(Uninstall), CELL_INST_UEM_ CFGING(Inner software module configuring), CELL_INST_RRU_ CFGING(RRU configuring), CELL_INST_BBI_C FGING(BBI configuring), CELL_INST_RECF GING(Recfging), CELL_INST_DELE TING(Deleting), CELL_INST_NORM AL(Normal), CELL_INST_BARR ED(Barred), CELL_INST_ALLO CATING_RES(Alloc ating resource), CELL_INST_CRM_ CFGING(RRU configuring)
CELL_INST_UNIN STALL~0, CELL_INST_UEM_ CFGING~1, CELL_INST_RRU_ CFGING~2, CELL_INST_BBI_C FGING~3, CELL_INST_RECF GING~4, None CELL_INST_DELE TING~5, CELL_INST_NORM AL~6, CELL_INST_BARR ED~7, CELL_INST_ALLO CATING_RES~8, CELL_INST_CRM_ CFGING~9
None
Enumeration Type
NO_INFORMATIO N(No Information), CCEM_FAILURE(C onfiguration activation fail), CCEM_CELLALG_ ERR_CODE_NON_ BF_VERSION_CEL LACT_FAILED(Bea mforming switch prohibited for nonbeamforming cells in active mode), CCEM_CELLALG_ ERR_CODE_NO_S UPPORT_BF_SW_ ON(The version of the Bbi with the cell does not support the BF algo), CCEM_CELLALG_ ERR_CODE_NO_S UPPORT_MUBF_S W(The version of the Bbi with the cell does not support the MUBF algo), CCEM_CELLALG_ ERR_CODE_NO_S UPPORT_VMIMO_ SW(The version of the Bbi with the cell does not support the UL VMIMO 0~32 characters
NO_INFORMATIO N~0, CCEM_FAILURE~1 , CCEM_CELLALG_ ERR_CODE_NON_ BF_VERSION_CEL LACT_FAILED~196 5424659, CCEM_CELLALG_ ERR_CODE_NO_S UPPORT_BF_SW_ ON~1965424662, CCEM_CELLALG_ ERR_CODE_NO_S UPPORT_MUBF_S W~1965424663, None CCEM_CELLALG_ ERR_CODE_NO_S UPPORT_VMIMO_ SW~1965424664, CCEM_CELLALG_ ERR_CODE_NO_S UPPORT_INTRA_S UB_FRAM~196542 4665, CCEM_CELLALG_ ERR_CODE_NO_S UPPORT_EXTERN D_CP~1965424666 , CCEM_CH_PUSC H_HOPING_OFFS ET_INVALID_CFG~ N/A None
None
None
Enumeration Type
CELL_NO_OP(No Operation), CELL_SETUP_ACT (Act Cell), CELL_SETUP_UBL (UnBlock Cell), CELL_SETUP_HE ALCHK(Cell Healthy Check), CELL_SETUP_141( 141 Cell Setup), CELL_SETUP_UL WIDESCAN(UL Wide Freq Scan Cell Setup), CELL_DEL_BLK_L OW(Block Cell Low), CELL_DEL_BLK_M ID(Block Cell Mid), CELL_DEL_BLK_H IGH(Block Cell High), CELL_DEL_NOUS ER(Block Cell No User), CELL_DEL_DEA(D ea Cell), CELL_DEL_RMV(D elete Cell), CELl_DEL_HEALC HK(Cell Healthy Chk), CELL_DEL_UNHE 0~32 characters
CELL_NO_OP~0, CELL_SETUP_ACT ~1, CELL_SETUP_UBL ~2, CELL_SETUP_HE ALCHK~3, CELL_SETUP_141 ~4, CELL_SETUP_UL WIDESCAN~5, CELL_DEL_BLK_L OW~26, CELL_DEL_BLK_M ID~27, CELL_DEL_BLK_H IGH~28, None CELL_DEL_NOUS ER~29, CELL_DEL_DEA~3 0, CELL_DEL_RMV~3 1, CELl_DEL_HEALC HK~32, CELL_DEL_UNHE AL~33, CELL_DEL_SETUP _FAIL~34, CELL_DEL_141_D EL~35, CELL_DEL_ULWID ESCAN~36, CELL_DEL_CELLN N/A None
None
None
Enumeration Type
CELL_NO_OP(No Operation), CELL_SETUP_ACT (Act Cell), CELL_SETUP_UBL (UnBlock Cell), CELL_SETUP_HE ALCHK(Cell Healthy Check), CELL_SETUP_141( 141 Cell Setup), CELL_SETUP_UL WIDESCAN(UL Wide Freq Scan Cell Setup), CELL_DEL_BLK_L OW(Block Cell Low), CELL_DEL_BLK_M ID(Block Cell Mid), CELL_DEL_BLK_H IGH(Block Cell High), CELL_DEL_NOUS ER(Block Cell No User), CELL_DEL_DEA(D ea Cell), CELL_DEL_RMV(D elete Cell), CELl_DEL_HEALC HK(Cell Healthy Chk), CELL_DEL_UNHE
CELL_NO_OP~0, CELL_SETUP_ACT ~1, CELL_SETUP_UBL ~2, CELL_SETUP_HE ALCHK~3, CELL_SETUP_141 ~4, CELL_SETUP_UL WIDESCAN~5, CELL_DEL_BLK_L OW~26, CELL_DEL_BLK_M ID~27, CELL_DEL_BLK_H IGH~28, None CELL_DEL_NOUS ER~29, CELL_DEL_DEA~3 0, CELL_DEL_RMV~3 1, CELl_DEL_HEALC HK~32, CELL_DEL_UNHE AL~33, CELL_DEL_SETUP _FAIL~34, CELL_DEL_141_D EL~35, CELL_DEL_ULWID ESCAN~36, CELL_DEL_CELLN
None
Enumeration Type
CELL_PWRSAVE_ UNINSTALL(Uninst all), CELL_PWRSAVE_ RFSHD(RF Intelligent Shutdown Mode), CELL_PWRSAVE_ CELLSHD(Cell Intelligent Shutdown Mode), CELL_PWRSAVE_ LOWPWR_CELLU SEDPWRRDU(Low Power Consumption Mode-Cell Used Power Reduced), CELL_PWRSAVE_ LOWPWR_RSPW RRDU(Low Power Consumption ModeReference Signal Power Reduced), CELL_PWRSAVE_ LOWPWR_RFSHD (Low Power Consumption ModeRF Shutdown), CELL_PWRSAVE_ LOWPWR_CELLS HD(Low Power Consumption ModeCell Shutdown), AUTO_PWROFF_ BBI_SLOT_0(0), BBI_SLOT_1(1), BBI_SLOT_2(2), BBI_SLOT_3(3), BBI_SLOT_4(4), BBI_SLOT_5(5), BBI_SLOT_INVALI D(Invalid Slot Number)
CELL_PWRSAVE_ UNINSTALL~0, CELL_PWRSAVE_ RFSHD~1, CELL_PWRSAVE_ CELLSHD~2, CELL_PWRSAVE_ LOWPWR_CELLU SEDPWRRDU~3, CELL_PWRSAVE_ LOWPWR_RSPW RRDU~4, None CELL_PWRSAVE_ LOWPWR_RFSHD ~5, CELL_PWRSAVE_ LOWPWR_CELLS HD~6, AUTO_PWROFF_ ONTIME~7, CELL_PWRSAVE_I NTERRAT_CELLS HD~8
None
Enumeration Type
BBI_SLOT_0~0, BBI_SLOT_1~1, BBI_SLOT_2~2, BBI_SLOT_3~3, None BBI_SLOT_4~4, BBI_SLOT_5~5, BBI_SLOT_INVALI D~65535
None
Enumeration Type
BASIC_TYPE(Basic Type), TWO_RRU_COMBI NATION_TYPE(TW O RRU Combination Type), SFN_TYPE(SFN Type), BF_TYPE(BF Type), MIMO_HELP_TYP E(Mutual-Aid MIMO Type), CELL_COMBINATI ON_TYPE(Cell Combination Type), DIGITAL_COMBIN ATION_TYPE(Cell Digital Combination Type), INVALID_TYPE(Inv alid Type)
BASIC_TYPE~0, TWO_RRU_COMBI NATION_TYPE~2, SFN_TYPE~3, BF_TYPE~4, MIMO_HELP_TYP E~6, None CELL_COMBINATI ON_TYPE~14, DIGITAL_COMBIN ATION_TYPE~15, INVALID_TYPE~25 5
None
Interval Type
0~62
N/A
None
None
Interval Type
4~254
N/A
None
None
Interval Type
0~8
N/A
None
None
Enumeration Type
UNINSTALL(Uninst all), UNINSTALL~0, SYMBOL_SHUTDO SYMBOL_SHUTDO None WN(Symbol WN~1 shutdown)
None
Interval Type
0~65535
N/A
0.1dBm
None
Interval Type
0~17
N/A
None
Single Streaming Beamforming BEAMFORMING AND MIMO ADAPTIVE SWITCH (Test Feature)
Enumeration Type
SINGLE_LAYER_B SINGLE_LAYER_B F~0, F(), None DUAL_LAYER_BF~ DUAL_LAYER_BF() 1
None
Interval Type
0~17
N/A
None
Downlink Static Inter-Cell Interference Coordination Downlink Dynamic Inter-Cell Interference Coordination
Enumeration Type
ms
Interval Type
1~8
N/A
None
Enumeration Type
Enumeration Type
Enumeration Type
RSRP, RSRQ
RSRP~0, RSRQ~1 None
Interval Type
0~30
N/A
0.5dB
Enumeration Type
None
Interval Type
-30~30
N/A
0.5dB
Low Power Interval Type Consumption Mode
0~17
N/A
None
Low Power Enumeration Type Consumption Mode
OFF(Off), ON(On)
OFF~0, ON~1
None
Low Power Enumeration Type Consumption Mode
OFF(Off), ON(On)
OFF~0, ON~1
None
Low Power Compound Type Consumption Mode
00:00:00~23:59:59
N/A
None
Low Power Compound Type Consumption Mode
00:00:00~23:59:59
N/A
None
0~1440
N/A
min
0~1440
N/A
min
0~1440
N/A
min
10~100
N/A
-10~0
N/A
dB
1~1440
N/A
min
None
Interval Type
0~17
N/A
None
Mobility Robust Enumeration Type Optimization(MRO)
NOT_CFG~0, CFG~1
None
Interval Type
0~17
N/A
None
3GPP R8 Specifications Interval Type Admission Control Congestion Control
1~15
N/A
None
1~15
N/A
None
3GPP R8 Specifications Admission Control
Interval Type
10~99
N/A
Interval Type
10~99
N/A
Interval Type
10~99
N/A
Interval Type
10~99
N/A
Interval Type
0~90
N/A
Interval Type
0~90
N/A
Interval Type
0~90
N/A
3GPP R8 Specifications Interval Type Congestion Control
0~99
N/A
0~99
N/A
0~99
N/A
0~99
N/A
1~100
N/A
1~100
N/A
1~100
N/A
Interval Type
0~100
N/A
Interval Type
0~100
N/A
1~15
N/A
None
0~50
N/A
3GPP R8 Specifications Radio/transport Resource Preemption
Interval Type
1~15
N/A
None
10~100
N/A
10~100
N/A
10~100
N/A
10~100
N/A
Interval Type
0~9000
N/A
None
RF Channel Interval Type Intelligent Shutdown
0~17
N/A
None
RF Channel Enumeration Type Intelligent Shutdown
OFF(Off), ON(On)
OFF~0, ON~1
None
RF Channel Compound Type Intelligent Shutdown
00:00:00~23:59:59
N/A
None
RF Channel Compound Type Intelligent Shutdown
00:00:00~23:59:59
N/A
None
RF Channel Interval Type Intelligent Shutdown
0~7
N/A
dB
None
Interval Type
0~17
N/A
None
None
Enumeration Type
OFF(Off), ON(On)
OFF~0, ON~1
None
None
Interval Type
0~2
N/A
None
None
Enumeration Type
OFF(Off), ON(On)
OFF~0, ON~1
None
Intelligent PowerOff of Carriers in Interval Type the Same Coverage
0~17
N/A
None
Intelligent PowerOff of Carriers in Enumeration Type the Same Coverage
OFF(Off), ON(On)
OFF~0, ON~1
None
Intelligent PowerOff of Carriers in Compound Type the Same Coverage
00:00:00~23:59:59
N/A
None
Intelligent PowerOff of Carriers in Compound Type the Same Coverage
00:00:00~23:59:59
N/A
None
0~100
N/A
0~100
N/A
0~100
N/A
0~100
N/A
None
Interval Type
0~17
N/A
None
Uplink Static InterCell Interference Coordination Uplink Dynamic Inter-Cell Interference Coordination
Enumeration Type
ms
Interval Type
1~8
N/A
None
Enumeration Type
Enumeration Type
Enumeration Type
RSRP, RSRQ
RSRP~0, RSRQ~1 None
Interval Type
0~30
N/A
0.5dB
Enumeration Type
ms
Interval Type
-30~30
N/A
0.5dB
None
Interval Type
0~17
N/A
None
Enumeration Type
ULSCH_STRATEG Y_EPF(EPF), ULSCH_STRATEG Y_MAX_CI(MAX_CI ), ULSCH_STRATEG Y_PF(PF), ULSCH_STRATEG Y_RR(RR)
ULSCH_STRATEG Y_EPF~0, ULSCH_STRATEG Y_MAX_CI~1, None ULSCH_STRATEG Y_PF~2, ULSCH_STRATEG Y_RR~3
UL Synchronous HARQ
Enumeration Type
ADAPTIVE_HARQ_ SW_ON(On), ADAPTIVE_HARQ_ SW_OFF(Off), ADAPTIVE_HARQ_ SW_SEMI_ON(Se miOn)
ADAPTIVE_HARQ_ SW_ON~0, ADAPTIVE_HARQ_ None SW_OFF~1, ADAPTIVE_HARQ_ SW_SEMI_ON~2
AMC
Interval Type
1~99
N/A
0.01
Dynamic Scheduling
Interval Type
0~100
N/A
Dynamic Scheduling
Interval Type
1~40
N/A
ms
Dynamic Scheduling
Interval Type
45~1500
N/A
byte
Enumeration Type
HOPPING_OFF(Ho pping off), HOPPING_TYPE1( Hopping Type 1), HOPPING_TYPE2( Hopping Type 2), HOPPING_TYPE2_ RANDOM(Hopping Type 2 Random)
HOPPING_OFF~0, HOPPING_TYPE1~ 1, HOPPING_TYPE2~ None 2, HOPPING_TYPE2_ RANDOM~3
Dynamic Scheduling Interval Type Admission Control Congestion Control
0~100
N/A
Dynamic Scheduling
Interval Type
16~15000
N/A
bit
Dynamic Scheduling
Interval Type
2~3
N/A
None
Intelligent PowerOff of Carriers in Interval Type the Same Coverage of UMTS Network
0~17
N/A
None
Intelligent PowerOff of Carriers in Enumeration Type the Same Coverage of UMTS Network
OFF(Off), ON(On)
OFF~0, ON~1
None
Intelligent PowerOff of Carriers in Compound Type the Same Coverage of UMTS Network
00:00:00~23:59:59
N/A
None
Intelligent PowerOff of Carriers in Compound Type the Same Coverage of UMTS Network
00:00:00~23:59:59
N/A
None
0~5000
N/A
None
0~100
N/A
0~100
N/A
None
Interval Type
0~17
N/A
None
3GPP R8 Specifications Random Access Procedure
Bit Field Type
RachAdjSwitch(Rac hAdjSwitch), HoRaSwitch(HoRa Switch), UnsyncRaSwitch(U nsyncRaSwitch), MaksIdxSwitch(Mak sIdxSwitch), BackOffSwitch(Bac kOffSwitch)
RachAdjSwitch~0, HoRaSwitch~1, UnsyncRaSwitch~2, None MaksIdxSwitch~3, BackOffSwitch~4
Bit Field Type
SrsSubframeRecfS SrsSubframeRecfS witch(SrsSubframe None witch~0 RecfSwitch)
Bit Field Type
PucchSwitch(Pucch PucchSwitch~0 Switch)
None
Active Queue Bit Field Type Management(AQM)
AqmAlgoSwitch
AqmAlgoSwitch~0
None
UL 2x2 MU-MIMO CQI Adjustment Dynamic Scheduling
Bit Field Type
CqiAdjAlgoSwitch, StepVarySwitch
CqiAdjAlgoSwitch~ 0, None StepVarySwitch~1
None
Enumeration Type
OFF(Off), ON(On)
OFF~0, ON~1
None
Bit Field Type
DynAdjVoltSwitch(D ynamic Adjust DynAdjVoltSwitch~0 None Voltage Switch)
3GPP R8 Specifications Admission Control Congestion Control Bit Field Type Radio/transport Resource Preemption
DlSwitch(dlCacSwit ch), UlSwitch(ulCacSwit ch), DlPredictSwitch(dlC acPredictSwitch), UlPredictSwitch(ulC acPredictSwitch), GbrUsageSwitch(G brUsedPRbCheckS witch), DlLdcSwitch(dlLdcS witch), UlLdcSwitch(ulLdcS witch), RelDrbSwitch(LdcD rbRelSwitch), PreemptionSwitch( PreemptionSwitch)
DlSwitch~0, UlSwitch~1, DlPredictSwitch~2, UlPredictSwitch~3, GbrUsageSwitch~4, None DlLdcSwitch~5, UlLdcSwitch~6, RelDrbSwitch~7, PreemptionSwitch~ 8
3GPP R8 Specifications Intra-LTE Load Balancing Bit Field Type Inter-RAT Load Sharing to UTRAN Inter-RAT Load Sharing to GERAN
IntraFreqMlbSwitch( IntraFreqMlbSwitch) , InterFreqMlbSwitch( InterFreqMlbSwitch) , UtranMlbSwitch(Utr anMlbSwitch), GeranMlbSwitch(Ge ranMlbSwitch), CdmaMlbSwitch(Cd maMlbSwitch), IntraFreqIdleMlbSwi tch(IntraFreqIdleMlb Switch)
IntraFreqMlbSwitch ~0, InterFreqMlbSwitch ~1, UtranMlbSwitch~2, None GeranMlbSwitch~3, CdmaMlbSwitch~4, IntraFreqIdleMlbSwi tch~5
Physical Channel Management Broadcast of Bit Field Type system information Dynamic Downlink Power Allocation
PdschSpsPcSwitch PdschSpsPcSwitch, ~0, PhichInnerLoopPcS PhichInnerLoopPcS None witch, witch~1, PdcchPcSwitch PdcchPcSwitch~2
Broadcast of system information Bit Field Type Uplink Power Control
CloseLoopSpsSwitc h, InnerLoopPuschSwi tch, PhSinrTarUpdateS witch, InnerLoopPucchSwi tch, OiSinrTarUpdateSw itch, PowerSavingSwitch
CloseLoopSpsSwitc h~0, InnerLoopPuschSwi tch~1, PhSinrTarUpdateS witch~2, None InnerLoopPucchSwi tch~3, OiSinrTarUpdateSw itch~4, PowerSavingSwitch ~5
Single Streaming Beamforming Dual streaming Beamforming BEAMFORMING AND MIMO ADAPTIVE SWITCH (Test Feature)
Bit Field Type
BfSwitch
BfSwitch~0
None
Bit Field Type
FreqSelSwitch(Freq SelSwitch), ServiceDiffSwitch(S erviceDiffSwitch), SpsSchSwitch(Sps SchSwitch), MBSFNShutDownS witch(MBSFNShutD ownSwitch)
FreqSelSwitch~0, ServiceDiffSwitch~1 , SpsSchSwitch~2, None MBSFNShutDownS witch~3
Basic Scheduling Enhanced Scheduling TTI Bundling VoIP Semipersistent Scheduling / VoIP Semi-persistent Scheduling 800M Selfinterference Cancellation
Bit Field Type
SpsSchSwitch(Sps SchSwitch), SinrAdjustSwitch(Si nrAdjustSwitch), PreAllocationSwitch (PreAllocationSwitc h), UlVmimoSwitch(UlV mimoSwitch), TtiBundlingSwitch(T tiBundlingSwitch), ImIcSwitch(ImIcSwit ch)
SpsSchSwitch~0, SinrAdjustSwitch~1, PreAllocationSwitch ~2, None UlVmimoSwitch~3, TtiBundlingSwitch~ 4, ImIcSwitch~5
3GPP R8 Specifications Admission Control Basic Scheduling
Enumeration Type
OFF(Off), ON(On)
OFF~0, ON~1
None
Bit Field Type
FreqPriorIFHOSwitc h(FreqPriorIFHOSw itch), FreqPriorIFBlindHO Switch(FreqPriorIFB lindHOSwitch)
FreqPriorIFHOSwitc h~0, None FreqPriorIFBlindHO Switch~1
Bit Field Type
MuBfSwitch(MuBfS MuBfSwitch~0 witch)
None
Distance Based Inter-frequency Handover Distance based Inter-RAT handover Enumeration Type to UTRAN Distance based Inter-RAT handover to GERAN
OFF(Off), ON(On)
OFF~0, ON~1
None
ACBAR_SWITCH_ DYNAMIC(dynamic configuration), ACBAR_SWITCH_ STATIC(static configuration), ACBAR_SWITCH_ DISABLE(Disable)
ACBAR_SWITCH_ DYNAMIC~0, ACBAR_SWITCH_ None STATIC~1, ACBAR_SWITCH_ DISABLE~2
Enumeration Type
None
None
Enumeration Type
None
None
Interval Type
0~17
N/A
None
Enumeration Type
MODE1(DL band division scheme No.1), MODE2(DL band division scheme No.2), MODE3(DL band division scheme No.3), INVALID(Invalid DL band division scheme)
MODE1~0, MODE2~1, MODE3~2, INVALID~255
None
Interval Type
0~17
N/A
None
Interval Type
-150~150
N/A
0.1dB
Interval Type
0~17
N/A
None
Enumeration Type
PA_NEG6(-6dB), PA_NEG4DOT77(4.77dB), PA_NEG3(- PA_NEG6~0, 3dB), PA_NEG4DOT77~1 PA_NEG1DOT77(- , PA_NEG3~2, dB 1.77dB), PA_NEG1DOT77~3 PA_0(0dB), , PA_0~4, PA_1~5, PA_1(1dB), PA_2~6, PA_3~7 PA_2(2dB), PA_3(3dB) PA_NEG6(-6dB), PA_NEG4DOT77(4.77dB), PA_NEG3(- PA_NEG6~0, 3dB), PA_NEG4DOT77~1 PA_NEG1DOT77(- , PA_NEG3~2, dB 1.77dB), PA_NEG1DOT77~3 PA_0(0dB), , PA_0~4, PA_1~5, PA_1(1dB), PA_2~6, PA_3~7 PA_2(2dB), PA_3(3dB)
Enumeration Type
Interval Type
0~17
N/A
None
Interval Type
-150~150
N/A
0.1dBm
None
Interval Type
0~17
N/A
None
Enumeration Type
DLSCH_PRI_TYPE _EPF(EPF), DLSCH_PRI_TYPE _PF(PF), DLSCH_PRI_TYPE _MAX_CI(MAX C/I), DLSCH_PRI_TYPE _RR(RR)
DLSCH_PRI_TYPE _EPF~0, DLSCH_PRI_TYPE _PF~1, None DLSCH_PRI_TYPE _MAX_CI~2, DLSCH_PRI_TYPE _RR~3
Dynamic Scheduling Interval Type Admission Control Congestion Control
0~100
N/A
P2P Throttling
Interval Type
0~100
N/A
0.01
P2P Throttling
Interval Type
0~100
N/A
0.01
Dynamic Scheduling Enumeration Type Admission Control Congestion Control
SW_MAX_SM_RA NK_1(), SW_MAX_SM_RA NK_2(), SW_MAX_SM_RA NK_4()
SW_MAX_SM_RA NK_1~0, SW_MAX_SM_RA NK_2~1, SW_MAX_SM_RA NK_4~2
None
None
Interval Type
0~17
N/A
None
3GPP R8 Specifications Intra-LTE Load Balancing
Interval Type
1~100
N/A
3GPP R8 Specifications Intra-LTE Load Balancing
Interval Type
1~100
N/A
3GPP R8 Specifications Inter-RAT Load Interval Type Sharing to UTRAN Inter-RAT Load Sharing to GERAN
1~100
N/A
3GPP R8 Specifications Intra-LTE Load Balancing Enumeration Type Inter-RAT Load Sharing to UTRAN Inter-RAT Load Sharing to GERAN
LOAD_EXCHANGE _PERIOD_1S(1s), LOAD_EXCHANGE _PERIOD_2S(2s), LOAD_EXCHANGE _PERIOD_5S(5s), LOAD_EXCHANGE _PERIOD_10S(10s)
LOAD_EXCHANGE _PERIOD_1S~0, LOAD_EXCHANGE _PERIOD_2S~1, s LOAD_EXCHANGE _PERIOD_5S~2, LOAD_EXCHANGE _PERIOD_10S~3
3GPP R8 Specifications Intra-LTE Load Balancing Interval Type Inter-RAT Load Sharing to UTRAN Inter-RAT Load Sharing to GERAN
0~50
N/A
3GPP R8 Specifications Intra-LTE Load Balancing Interval Type Inter-RAT Load Sharing to UTRAN Inter-RAT Load Sharing to GERAN
1~50
N/A
None
Interval Type
0~17
N/A
None
Enumeration Type
CONGREG_LV4, CONGREG_LV8
CONGREG_LV4~2, None CONGREG_LV8~3
3GPP R8 Specifications ADAPATIVE CCE AGGREGATION
Enumeration Type
OFF(Off), ON(On)
OFF~0, ON~1
None
Interval Type
1~4
N/A
None
Interval Type
0~100
N/A
Enumeration Type
OFF(Off), ON(On)
OFF~0, ON~1
None
3GPP R8 Specifications REDUCE Interval Type SCHEDULE USER IN EACH TTI
1~100
N/A
Enumeration Type
OFF(Off), ON(On)
OFF~0, ON~1
None
None
Interval Type
0~17
N/A
None
None
Interval Type
0~50
N/A
None
Sleeping Cell Detection
Interval Type
0~17
N/A
None
Compound Type
00:00:00~23:59:59
N/A
None
Compound Type
00:00:00~23:59:59
N/A
None
Interval Type
0~72
N/A
None
Interval Type
0~17
N/A
None
Enumeration Type
MODE1(UL band division scheme No.1), MODE2(UL band division scheme No.2), MODE3(UL band division scheme No.3), INVALID(Invalid UL band division scheme)
MODE1~1, MODE2~2, MODE3~3, INVALID~255
None
None
Interval Type
0~17
N/A
None
None
Interval Type
0~9
N/A
None
None
Enumeration Type
TM1(TM1), TM2(TM2), TM7(TM7), TM8(TM8)
TM1~0, TM2~1, TM7~6, TM8~7
None
None
Interval Type
0~100
N/A
None
None
Interval Type
0~100
N/A
None
None
Interval Type
0~10000
N/A
0.01mW
None
Interval Type
0~10000
N/A
0.01mW
None
Interval Type
0~1200
N/A
None
None
Interval Type
0~1200
N/A
None
Interval Type
0~17
N/A
None
MOD_PERIOD_CO EFF_N2(2), MOD_PERIOD_CO EFF_N4(4), MOD_PERIOD_CO EFF_N8(8), MOD_PERIOD_CO EFF_N16(16)
MOD_PERIOD_CO EFF_N2~0, MOD_PERIOD_CO EFF_N4~1, None MOD_PERIOD_CO EFF_N8~2, MOD_PERIOD_CO EFF_N16~3
None
Interval Type
0~17
N/A
None
Physical Channel Management Broadcast of Interval Type system information Dynamic Downlink Power Allocation
-3175~3175
N/A
0.005dB
-3175~3175
N/A
0.005dB
-3175~3175
N/A
0.005dB
-3175~3175
N/A
0.005dB
Physical Channel Management Broadcast of system information Interval Type Paging Dynamic Downlink Power Allocation Physical Channel Management Broadcast of system information Interval Type Random Access Procedure Dynamic Downlink Power Allocation
-3175~3175
N/A
0.005dB
-3175~3175
N/A
0.005dB
None
Interval Type
-3175~3175
N/A
0.005dB
None
Interval Type
0~17
N/A
None
-600~500
N/A
0.1dBm
0~3
N/A
None
Interval Type
0~17
N/A
None
Enumeration Type
DB0_PWR_RAMPI NG_STEP(0dB), DB2_PWR_RAMPI NG_STEP(2dB), DB4_PWR_RAMPI NG_STEP(4dB), DB6_PWR_RAMPI NG_STEP(6dB)
DB0_PWR_RAMPI NG_STEP~0, DB2_PWR_RAMPI NG_STEP~1, dB DB4_PWR_RAMPI NG_STEP~2, DB6_PWR_RAMPI NG_STEP~3
Enumeration Type
DBM_120(120dBm), DBM_118(118dBm), DBM_116(116dBm), DBM_120~0, DBM_114(DBM_118~1, 114dBm), DBM_116~2, DBM_112(DBM_114~3, 112dBm), DBM_112~4, DBM_110(DBM_110~5, 110dBm), DBM_108~6, DBM_108(DBM_106~7, 108dBm), DBM_104~8, DBM_106(DBM_102~9, 106dBm), DBM_100~10, DBM_104(DBM_98~11, 104dBm), DBM_96~12, DBM_102(DBM_94~13, 102dBm), DBM_92~14, DBM_100(DBM_90~15 100dBm), DBM_98(98dBm), DBM_96(96dBm), DBM_94(94dBm), DBM_92(92dBm), DBM_90(90dBm)
dBm
3GPP R8 Specifications Transport Channel Management
Enumeration Type
B56_MSG_SIZE_G ROUPA(56bits), B144_MSG_SIZE_ GROUPA(144bits), B208_MSG_SIZE_ GROUPA(208bits), B256_MSG_SIZE_ GROUPA(256bits)
B56_MSG_SIZE_G ROUPA~0, B144_MSG_SIZE_ GROUPA~1, bit B208_MSG_SIZE_ GROUPA~2, B256_MSG_SIZE_ GROUPA~3
Interval Type
0~94
N/A
None
Enumeration Type
NOT_CFG~0, CFG~1
None
Interval Type
0~63
N/A
None
Interval Type
0~17
N/A
None
3GPP R8 Specifications Physical Channel Management
Enumeration Type
SC0(0), SC1(1), SC2(2), SC3(3), SC4(4), SC5(5), SC6(6), SC7(7), SC8(8), SC9(9), SC10(10), SC11(11), SC12(12), SC13(13), SC14(14)
SC0~0, SC1~1, SC2~2, SC3~3, SC4~4, SC5~5, SC6~6, SC7~7, SC8~8, SC9~9, None SC10~10, SC11~11, SC12~12, SC13~13, SC14~14
Enumeration Type
Enumeration Type
Enumeration Type
ACCESS_FIRST(A ccess First), ACCESS_FIRST~0, EXPERIENCE_FIR EXPERIENCE_FIR None ST(Experience ST~1 First)
Enumeration Type
BW0(BW0), BW1(BW1), BW2(BW2), BW3(BW3), BW4(BW4), BW5(BW5), BW6(BW6), BW7(BW7)
BW0~0, BW1~1, BW2~2, BW3~3, BW4~4, BW5~5, BW6~6, BW7~7
None
None
Interval Type
0~17
N/A
None
Physical Channel Management Enumeration Type Broadcast of system information
NORMAL, EXTENDED
NORMAL~0, EXTENDED~1
None
ONE_SIXTH, HALF, ONE, TWO
ONE_SIXTH~0, HALF~1, ONE~2, TWO~3
None
None
Interval Type
0~17
N/A
None
Broadcast of system information Enumeration Type Paging
rf32(32 radio frames), rf64(64 radio frames), rf128(128 radio frames), rf256(256 radio frames)
rf32~0, rf64~1, rf128~2, rf256~3
None
Broadcast of system information Enumeration Type Paging
FOURT, TWOT, ONET, HALFT, QUARTERT, ONE_EIGHTT, ONE_SIXTEENTHT , ONE_THIRTY_SEC ONDT
FOURT~0, TWOT~1, ONET~2, HALFT~3, QUARTERT~4, ONE_EIGHTT~5, None ONE_SIXTEENTHT ~6, ONE_THIRTY_SEC ONDT~7
None
Interval Type
0~17
N/A
None
Physical Channel Management Interval Type Broadcast of system information
1~4
N/A
None
INTER_SUB_FRA ME(Inter), INTRA_AND_INTE R_SUB_FRAME(Int er And Intra)
INTER_SUB_FRA ME~0, None INTRA_AND_INTE R_SUB_FRAME~1
0~98
N/A
RB
0~29
N/A
None
0~7
N/A
None
UL 64QAM
Enumeration Type
Interval Type
0~17
N/A
None
Enumeration Type
DS1_DELTA_SHIF T(ds1), DS2_DELTA_SHIF T(ds2), DS3_DELTA_SHIF T(ds3)
DS1_DELTA_SHIF T~0, DS2_DELTA_SHIF None T~1, DS3_DELTA_SHIF T~2
Interval Type
0~100
N/A
None
Interval Type
0~20
N/A
None
6~32 characters
N/A
None
3 characters
N/A
None
2~3 characters
N/A
None
None
Interval Type
0~17
N/A
None
PS Inter-RAT Mobility between E- Character String UTRAN and Type CDMA2000
6~32 characters
N/A
None
PS Inter-RAT Mobility between EUTRAN and Enumeration Type CDMA2000 Inter-RAT ANR
PERMIT_RMV_EN UM(Permit ANR Remove), FORBID_RMV_EN UM(Forbid ANR Remove)
PERMIT_RMV_EN UM~0, None FORBID_RMV_EN UM~1
Mobility Management
Interval Type
0~32
N/A
None
Automatic Neighbour Relation Character String (ANR) Type Inter-RAT ANR
0~99 characters
N/A
None
0~99 characters
N/A
None
None
Interval Type
0~17
N/A
None
PS Inter-RAT Mobility between EUTRAN and CDMA2000 Cell Selection and Enumeration Type Reselection / Cell Selection and Reselection Inter-RAT ANR
bc0~0, bc1~1, bc2~2, bc3~3, bc0, bc1, bc2, bc3, bc4~4, bc5~5, bc4, bc5, bc6, bc7, bc6~6, bc7~7, bc8, bc9, bc10, bc8~8, bc9~9, None bc11, bc12, bc13, bc10~10, bc11~11, bc14, bc15, bc16, bc12~12, bc13~13, bc17 bc14~14, bc15~15, bc16~16, bc17~17
PS Inter-RAT Mobility between EUTRAN and CDMA2000 Cell Selection and Interval Type Reselection / Cell Selection and Reselection Inter-RAT ANR
0~2047
N/A
None
PS Inter-RAT Mobility between EUTRAN and Interval Type CDMA2000 Inter-RAT ANR
-15~15
N/A
dB
3GPP R8 Specifications PS Inter-RAT Enumeration Type Mobility between EUTRAN and CDMA2000
NOT_CFG~0, CFG~1
None
3GPP R8 Specifications PS Inter-RAT Interval Type Mobility between EUTRAN and CDMA2000
0~15
N/A
None
3 characters
N/A
None
2~3 characters
N/A
None
Interval Type
0~1048575
N/A
None
Interval Type
0~255
N/A
None
3 characters
N/A
None
2~3 characters
N/A
None
Interval Type
0~65535
N/A
None
Interval Type
1~65533,65535
N/A
None
3 characters
N/A
None
2~3 characters
N/A
None
3 characters
N/A
None
2~3 characters
N/A
None
Interval Type
0~268435455
N/A
None
3 characters
N/A
None
2~3 characters
N/A
None
3 characters
N/A
None
2~3 characters
N/A
None
6~32 characters
N/A
None
PS Inter-RAT Mobility between EUTRAN and CDMA2000 Cell Selection and Enumeration Type Reselection / Cell Selection and Reselection Inter-RAT ANR PS Inter-RAT Mobility between EUTRAN and CDMA2000 Cell Selection and Interval Type Reselection / Cell Selection and Reselection Inter-RAT ANR
0~2047
N/A
None
3GPP R8 Specifications PS Inter-RAT Mobility between EUTRAN and Interval Type CDMA2000 Cell Selection and Reselection / Cell Selection and Reselection
0~511
N/A
None
PS Inter-RAT Mobility between EUTRAN and Enumeration Type CDMA2000 Cell Selection and Reselection
CDMA2000_HRPD( CDMA2000_HRPD) , CDMA2000_1XRTT (CDMA2000_1XRT T)
CDMA2000_HRPD ~0, None CDMA2000_1XRTT ~1
3 characters
N/A
None
2~3 characters
N/A
None
PS Inter-RAT Mobility between EUTRAN and CDMA2000 Character String Cell Selection and Type Reselection / Cell Selection and Reselection Inter-RAT ANR
0~99 characters
N/A
None
None
Interval Type
0~17
N/A
None
6~32 characters
N/A
None
PS Inter-RAT Mobility between EUTRAN and Enumeration Type CDMA2000 Inter-RAT ANR
Mobility Management
Interval Type
0~32
N/A
None
0~99 characters
N/A
None
0~99 characters
N/A
None
None
Interval Type
0~17
N/A
None
PS Inter-RAT Mobility between EUTRAN and CDMA2000 Cell Selection and Enumeration Type Reselection / Cell Selection and Reselection Inter-RAT ANR
PS Inter-RAT Mobility between EUTRAN and CDMA2000 Interval Type Cell Selection and Reselection / Cell Selection and Reselection
0~7
N/A
None
Cell Selection and Reselection
Interval Type
0~63
N/A
dB
Interval Type
0~63
N/A
dB
PS Inter-RAT Mobility between E- Character String UTRAN and Type GERAN
3 characters
N/A
None
2~3 characters
N/A
None
0~65535
N/A
None
1~65533,65535
N/A
None
PS Inter-RAT Mobility between EEnumeration Type UTRAN and GERAN
NOT_CFG~0, CFG~1
None
0~255
N/A
None
PS Inter-RAT Mobility between EUTRAN and GERAN SRVCC to GERAN CS Fallback to GERAN Enumeration Type Service based interRAT handover to GERAN Distance based inter-RAT handover to GERAN
None
0~1023
N/A
None
0~7
N/A
None
0~7
N/A
None
PS Inter-RAT Mobility between EUTRAN and GERAN Enumeration Type Service based interRAT handover to GERAN
DTM_AVAILABLE~ DTM_AVAILABLE, 0, DTM_NOT_AVAILA None DTM_NOT_AVAILA BLE BLE~1
0~99 characters
N/A
None
PS Inter-RAT Mobility between EUTRAN and GERAN Enumeration Type Service based interRAT handover to GERAN
None
Interval Type
0~17
N/A
None
3 characters
N/A
None
2~3 characters
N/A
None
1~65533,65535
N/A
None
0~65535
N/A
None
PERMIT_RMV_EN UM(Permit ANR Remove), FORBID_RMV_EN UM(Forbid ANR Remove) PERMIT_HO_ENU M(Permit Ho), FORBID_HO_ENU M(Forbid Ho)
Inter-RAT ANR
Enumeration Type
Mobility Management
Interval Type
0~32
N/A
None
0~99 characters
N/A
None
0~99 characters
N/A
None
Flash CS Fallback to GERAN
Interval Type
0~1048575
N/A
None
0~32 characters
N/A
None
0~32 characters
N/A
None
None
Interval Type
0~17
N/A
None
PS Inter-RAT Mobility between EUTRAN and Interval Type GERAN Inter-RAT ANR
0~31
N/A
None
GSM, GPRS, EDGE
GSM~0, GPRS~1, EDGE~2
None
PS Inter-RAT Mobility between EUTRAN and GERAN Interval Type Cell Selection and Reselection / Cell Selection and Reselection
0~1023
N/A
None
None
Cell Selection and Reselection / Cell Selection and Reselection
Enumeration Type
NOT_CFG~0, CFG~1
None
Interval Type
0~7
N/A
None
Enumeration Type
NOT_CFG~0, CFG~1
None
Interval Type
0~39
N/A
dBm
Interval Type
0~45
N/A
2dBm
Interval Type
0~31
N/A
2dB
Interval Type
0~31
N/A
2dB
PS Inter-RAT Mobility between EUTRAN and Interval Type GERAN Inter-RAT ANR
-15~15
N/A
dB
Interval Type
0~255
N/A
None
None
Interval Type
0~17
N/A
None
Broadcast of system information PS Inter-RAT Interval Type Mobility between EUTRAN and GERAN
0~31
N/A
None
Broadcast of system information Interval Type Inter-RAT ANR
0~1023
N/A
None
None
Interval Type
0~17
N/A
None
Cell Selection and Re-selection Coverage Based Intra-frequency Handover
Interval Type
0~503
N/A
None
0~99 characters
N/A
None
Enumeration Type
n1(n1), n4(n4), n8(n8), n12(n12), n16(n16), n24(n24), n32(n32), n48(n48), n64(n64), n84(n84), n96(n96), n128(n128), n168(n168), n252(n252), n504(n504)
n1~0, n4~1, n8~2, n12~3, n16~4, n24~5, n32~6, n48~7, n64~8, None n84~9, n96~10, n128~11, n168~12, n252~13, n504~14
None
Interval Type
0~17
N/A
None
3 characters
N/A
None
2~3 characters
N/A
None
Interval Type
0~1048575
N/A
None
Interval Type
0~255
N/A
None
Coverage Based Intra-frequency Handover Enumeration Type Mobility Robust Optimization (MRO)
Cell Selection and Re-selection
Enumeration Type
Coverage Based Intra-frequency Handover Enumeration Type Automatic Neighbour Relation (ANR)
Automatic Neighbour Relation Enumeration Type (ANR)
Coverage Based Intra-frequency Handover Character String Automatic Type Neighbour Relation (ANR)
0~99 characters
N/A
None
Coverage Based Intra-frequency Handover Character String Automatic Type Neighbour Relation (ANR)
0~99 characters
N/A
None
None
Interval Type
0~17
N/A
None
3GPP R8 Specifications Cell Selection and Reselection Coverage Based Inter-frequency Handover
Interval Type
0~45589,64436~65 N/A 535
None
3GPP R8 Specifications Cell Selection and Re-selection Coverage Based Inter-frequency Handover
Enumeration Type
NOT_CFG~0, CFG~1
None
3GPP R8 Specifications Cell Selection and Reselection Coverage Based Inter-frequency Handover
Interval Type
18000~45589,6443 N/A 6~65535
None
Enumeration Type
NOT_CFG~0, CFG~1
None
Interval Type
0~7
N/A
None
Interval Type
0~7
N/A
Enumeration Type
NOT_CFG~0, CFG~1
None
Enumeration Type
0DOT25_ENUM(0.2 5), 0DOT5_ENUM(0.5) , 0DOT75_ENUM(0.7 5), 1DOT0_ENUM(1.0)
0DOT25_ENUM~0, 0DOT5_ENUM~1, None 0DOT75_ENUM~2, 1DOT0_ENUM~3
Enumeration Type
0DOT25_ENUM(0.2 5), 0DOT5_ENUM(0.5) , 0DOT75_ENUM(0.7 5), 1DOT0_ENUM(1.0)
0DOT25_ENUM~0, 0DOT5_ENUM~1, None 0DOT75_ENUM~2, 1DOT0_ENUM~3
3GPP R8 Specifications Cell Selection and Re-selection Coverage Based Inter-frequency Handover
Enumeration Type
MBW6(1.4M), MBW15(3M), MBW25(5M), MBW50(10M), MBW75(15M), MBW100(20M)
MBW6~0, MBW15~1, MBW25~2, MBW50~3, MBW75~4, MBW100~5
MHz
3GPP R8 Specifications Cell Selection and Re-selection
Enumeration Type
Interval Type
0~31
N/A
2dB
Interval Type
0~31
N/A
2dB
Interval Type
-70~-22
N/A
2dBm
Enumeration Type
NOT_CFG~0, CFG~1
None
Interval Type
-30~33
N/A
dBm
Cell Selection and Re-selection Coverage Based Inter-frequency Handover
Enumeration Type
BitString00(00), BitString01(01), BitString10(10), BitString11(11)
BitString00~0, BitString01~1, BitString10~2, BitString11~3
None
Cell Selection and Reselection Coverage Based Inter-frequency Handover
Enumeration Type
Enumeration Type
EventA3(EventA3), EventA3~0, EventA4(EventA4), EventA4~1, EventA5(EventA5) EventA5~2
None
Interval Type
0~31
N/A
dB
Interval Type
0~31
N/A
dB
Enumeration Type
NOT_CFG~0, CFG~1
None
Interval Type
-34~-3
N/A
dB
None
Interval Type
0~17
N/A
None
Cell Selection and Reselection Coverage Based Inter-frequency Handover
Interval Type
0~45589,64436~65 N/A 535
None
Interval Type
0~503
N/A
None
0~99 characters
N/A
None
Enumeration Type
n1(n1), n4(n4), n8(n8), n12(n12), n16(n16), n24(n24), n32(n32), n48(n48), n64(n64), n84(n84), n96(n96), n128(n128), n168(n168), n252(n252), n504(n504)
n1~0, n4~1, n8~2, n12~3, n16~4, n24~5, n32~6, n48~7, n64~8, None n84~9, n96~10, n128~11, n168~12, n252~13, n504~14
None
Interval Type
0~17
N/A
None
3 characters
N/A
None
2~3 characters
N/A
None
Interval Type
0~1048575
N/A
None
Interval Type
0~255
N/A
None
Coverage Based Inter-frequency Handover Enumeration Type Mobility Robust Optimization (MRO)
Enumeration Type
Coverage Based Inter-frequency Handover Enumeration Type Automatic Neighbour Relation (ANR)
Coverage Based Inter-frequency Handover Cell Selection and Reselection / Cell Selection and Reselection
Interval Type
0~32
N/A
None
Coverage Based Inter-frequency Handover Character String Automatic Type Neighbour Relation (ANR)
0~99 characters
N/A
None
Coverage Based Inter-frequency Handover Character String Automatic Type Neighbour Relation (ANR)
0~99 characters
N/A
None
3 characters
N/A
None
2~3 characters
N/A
None
Interval Type
0~1048575
N/A
None
Interval Type
0~255
N/A
None
Interval Type
0~45589,64436~65 N/A 535
None
Enumeration Type
NOT_CFG~0, CFG~1
None
Interval Type
18000~45589,6443 N/A 6~65535
None
Coverage Based Intra-frequency Handover Coverage Based Inter-frequency Handover Cell Selection and Reselection
Interval Type
0~503
N/A
None
Interval Type
0~65535
N/A
None
0~99 characters
N/A
None
Interval Type
0~17
N/A
None
0~31
N/A
None
3 characters
N/A
None
2~3 characters
N/A
None
Enumeration Type
NOT_CFG~0, CFG~1
None
Interval Type
0~7
N/A
None
None
Interval Type
0~17
N/A
None
PS Inter-RAT Mobility between E- Character String UTRAN and Type UTRAN
3 characters
N/A
None
2~3 characters
N/A
None
0~268435455
N/A
None
PS Inter-RAT Mobility between EUTRAN and Enumeration Type UTRAN Inter-RAT ANR
Mobility Management
Interval Type
0~32
N/A
None
0~99 characters
N/A
None
0~99 characters
N/A
None
Flash CS Fallback to UTRAN
Interval Type
0~1048575
N/A
None
Interval Type
0~4095
N/A
None
0~32 characters
N/A
None
0~32 characters
N/A
None
Interval Type
0~17
N/A
None
0~16383
N/A
None
3 characters
N/A
None
2~3 characters
N/A
None
Enumeration Type
NOT_CFG~0, CFG~1
None
Interval Type
0~7
N/A
None
None
Interval Type
0~17
N/A
None
Broadcast of System Information PS Inter-RAT Mobility between E- Interval Type UTRAN and UTRAN Inter-RAT ANR
0~16383
N/A
None
PS Inter-RAT Mobility between EUTRAN and Enumeration Type UTRAN Cell Selection and Reselection PS Inter-RAT Mobility between EUTRAN and Enumeration Type UTRAN Inter-RAT ANR
R99, HSDPA, HSUPA, HSPA
R99~0, HSDPA~1, HSUPA~2, None HSPA~3
UTRAN_FDD, UTRAN_TDD
UTRAN_FDD~0, UTRAN_TDD~1
None
PS Inter-RAT Mobility between EUTRAN and Enumeration Type UTRAN Cell Selection and Reselection
NOT_CFG~0, CFG~1
None
PS Inter-RAT Mobility between EUTRAN and UTRAN Interval Type Cell Selection and Reselection Inter-RAT ANR
0~16383
N/A
None
Enumeration Type
NOT_CFG~0, CFG~1
None
Cell Selection and Reselection Interval Type Broadcast of system information
0~7
N/A
None
Interval Type
-50~33
N/A
dBm
PS Inter-RAT Mobility between EUTRAN and Interval Type UTRAN Inter-RAT ANR
-15~15
N/A
dB
Interval Type
-24~0
N/A
dB
Interval Type
-60~-13
N/A
2dBm
Interval Type
0~31
N/A
2dB
Interval Type
0~31
N/A
2dB
Interval Type
0~31
N/A
dB
Interval Type
0~31
N/A
dB
LOW_PRIORITY(L ow Priority), LOW_PRIORITY~1, None HIGH_PRIORITY(H HIGH_PRIORITY~2 igh Priority)
LOW_PRIORITY(L ow Priority), LOW_PRIORITY~1, None HIGH_PRIORITY(H HIGH_PRIORITY~2 igh Priority)
3 characters
N/A
None
2~3 characters
N/A
None
0~268435455
N/A
None
UTRAN_FDD~0, UTRAN_TDD~1
None
0~16383
N/A
None
NOT_CFG~0, CFG~1
None
0~16383
N/A
None
0~4095
N/A
None
NOT_CFG~0, CFG~1
None
0~255
N/A
None
0~511
N/A
None
PS Inter-RAT Mobility between EUTRAN and UTRAN SRVCC to UTRAN CS Fallback to UTRAN Interval Type Service based interRAT handover to UTRAN Distance based inter-RAT handover to UTRAN
1~65533,65535
N/A
None
0~99 characters
N/A
None
Automatic Neighbour Relation Interval Type (ANR)
0~100
N/A
0~100
N/A
1~10000
N/A
None
1~10080
N/A
min
None
Automatic Neighbour Relation Interval Type (ANR) Inter-RAT ANR
1~10080
N/A
min
-130~-70
N/A
dBm
1~200
N/A
None
Inter-RAT ANR
Interval Type
1~200
N/A
None
1~10000
N/A
None
Inter-RAT ANR
Interval Type
1~10000
N/A
None
FREE(FREE), FREE~0, CONTROLLED(CO CONTROLLED~1 NTROLLED)
None
1~50400
N/A
min
1~10000
N/A
None
OFF(Off), ON(On)
OFF~0, ON~1
None
Automatic Neighbour Relation Compound Type (ANR)
00:00:00~23:59:59
N/A
None
Automatic Neighbour Relation Compound Type (ANR)
00:00:00~23:59:59
N/A
None
-120~-25
N/A
dBm
-110~-48
N/A
dBm
-63~0
N/A
0.5dB
-63~0
N/A
0.5dB
Broadcast of Compound Type system information
2000-0101T00:00:00.00000:00~2099-1231T23:59:59.00000:00
N/A
None
Broadcast of Interval Type system information Coverage Based Intra-frequency Handover Coverage Based Inter-frequency Handover PS Inter-RAT Mobility between EUTRAN and UTRAN PS Inter-RAT Mobility between EUTRAN and GERAN PS Inter-RAT Mobility between EUTRAN and Bit Field Type CDMA2000 SRVCC to UTRAN SRVCC to GERAN CS Fallback to UTRAN CS Fallback to GERAN CS Fallback to CDMA2000 1xRTT Service based interRAT handover to UTRAN Inter-RAT Load Sharing to UTRAN Service based interRAT handover to GERAN
1~365 IntraFreqCoverHoS witch(IntraFreqCove rHoSwitch), InterFreqCoverHoS witch(InterFreqCove rHoSwitch), UtranCsfbSwitch(Ut ranCsfbSwitch), GeranCsfbSwitch(G eranCsfbSwitch), Cdma1xRttCsfbSwit ch(Cdma20001xRtt CsfbSwitch), UtranServiceHoSwit ch(UtranServiceHo Switch), GeranServiceHoSwi tch(GeranServiceH oSwitch), CdmaHrpdServiceH oSwitch(Cdma2000 HrpdServiceHoSwit ch), Cdma1xRttService HoSwitch(Cdma200 01xRttServiceHoSw itch), UlQualityInterRATH oSwitch(UlQualityInt erRATHoSwitch), InterPlmnHoSwitch( InterPlmnHoSwitch) , UtranFlashCsfbSwit
N/A
day
IntraFreqCoverHoS witch~0, InterFreqCoverHoS witch~1, UtranCsfbSwitch~2, GeranCsfbSwitch~3 , Cdma1xRttCsfbSwit ch~4, UtranServiceHoSwit ch~5, GeranServiceHoSwi tch~6, CdmaHrpdServiceH oSwitch~7, None Cdma1xRttService HoSwitch~8, UlQualityInterRATH oSwitch~9, InterPlmnHoSwitch ~10, UtranFlashCsfbSwit ch~11, GeranFlashCsfbSwi tch~12, ServiceBasedInterF reqHoSwitch~13, UlQualityInterFreqH oSwitch~14
PS Inter-RAT Mobility between EUTRAN and UTRAN PS Inter-RAT Mobility between EUTRAN and GERAN PS Inter-RAT Mobility between EUTRAN and CDMA2000 SRVCC to UTRAN SRVCC to GERAN CS Fallback to Bit Field Type UTRAN CS Fallback to GERAN CS Fallback to CDMA2000 1xRTT Service based interRAT handover to UTRAN Inter-RAT Load Sharing to UTRAN Inter-RAT Load Sharing to GERAN Service based interRAT handover to GERAN
EutranVoipCapSwit ch(EutranVoipCapS witch), UtranVoipCapSwitc h(UtranVoipCapSwi tch), GeranVoipCapSwitc h(GeranVoipCapSw itch), Cdma1xRttVoipCap Switch(Cdma1xRttV oipCapSwitch), UtranPsHoSwitch(U tranPsHoSwitch), GeranPsHoSwitch( GeranPsHoSwitch), CdmaHrpdNonOtpi misedHoSwitch(Cd maHrpdNonOtpimis edHoSwitch), CdmaHrpdOptimise dHoSwitch(CdmaHr pdOptimisedHoSwit ch), GeranNaccSwitch( GeranNaccSwitch), GeranCcoSwitch(G eranCcoSwitch), UtranSrvccSwitch(U tranSrvccSwitch), GeranSrvccSwitch( GeranSrvccSwitch), Cdma1xRttSrvccSw itch(Cdma1xRttSrvc
EutranVoipCapSwit ch~0, UtranVoipCapSwitc h~1, GeranVoipCapSwitc h~2, Cdma1xRttVoipCap Switch~3, UtranPsHoSwitch~4 , GeranPsHoSwitch~ 5, CdmaHrpdNonOtpi misedHoSwitch~6, CdmaHrpdOptimise dHoSwitch~7, GeranNaccSwitch~ None 8, GeranCcoSwitch~9, UtranSrvccSwitch~ 10, GeranSrvccSwitch~ 11, Cdma1xRttSrvccSw itch~12, UtranRedirectSwitc h~13, GeranRedirectSwitc h~14, CdmaHrpdRedirect Switch~15, Cdma1xRttRedirect Switch~16, BlindHoSwitch~17
Enumeration Type
DlIcicSwitch_OFF_ ENUM, DlIcicDynamicSwitc h_ON_ENUM, DlIcicStaticSwitch_ ON_ENUM, DlIcicReuse3Switch _ON_ENUM
DlIcicSwitch_OFF_ ENUM~0, DlIcicDynamicSwitc h_ON_ENUM~1, None DlIcicStaticSwitch_ ON_ENUM~2, DlIcicReuse3Switch _ON_ENUM~3
Automatic Neighbour Relation Bit Field Type (ANR) Inter-RAT ANR
IntraRatEventAnrS witch, IntraRatFastAnrSwit ch, IntraRatAnrAutoDel Switch, UtranEventAnrSwitc h, GeranEventAnrSwit ch, UtranFastAnrSwitch , GeranFastAnrSwitc h, CdmaFastAnrSwitc h, UtranAutoNrtDelete Switch, GeranAutoNrtDelet eSwitch, CdmaAutoNrtDelete Switch, ExtendIntraRatAnrS witch
IntraRatEventAnrS witch~0, IntraRatFastAnrSwit ch~1, IntraRatAnrAutoDel Switch~2, UtranEventAnrSwitc h~3, GeranEventAnrSwit ch~4, UtranFastAnrSwitch ~5, None GeranFastAnrSwitc h~6, CdmaFastAnrSwitc h~7, UtranAutoNrtDelete Switch~8, GeranAutoNrtDelet eSwitch~9, CdmaAutoNrtDelete Switch~10, ExtendIntraRatAnrS witch~11
PS Inter-RAT Mobility between EUTRAN and UTRAN PS Inter-RAT Mobility between EBit Field Type UTRAN and GERAN PS Inter-RAT Mobility between EUTRAN and CDMA2000
LoadBasedSwitch, GeranFlashRedirect Switch, UranFlashRedirectS witch
LoadBasedSwitch~ 0, GeranFlashRedirect None Switch~1, UranFlashRedirectS witch~2
Mobility Robust Bit Field Type Optimization (MRO)
IntraFreqMroSwitch( IntraFreqMroAlgoS witch), InterFreqMroSwitch( InterFreqMroAlgoS witch), UtranMroSwitch, GeranMroSwitch
IntraFreqMroSwitch ~0, InterFreqMroSwitch None ~1, UtranMroSwitch~2, GeranMroSwitch~3
3GPP R8 Specifications TCP Proxy Enhancer (TPE)
Bit Field Type
TpeAlgoSwitch
TpeAlgoSwitch~0
None
Uplink Dynamic Inter-Cell Interference Coordination
Bit Field Type
UlIcicIntraSwitch(Up link Intra-eNB ICIC UlIcicIntraSwitch~0 None switch)
Enumeration Type
OFF(Off), STATIC(Static), OFF~0, STATIC~1, None DYNAMIC(Dynamic DYNAMIC~2 )
LoCation Services(LCS)
Bit Field Type
OtdoaSwitch(OTDO OtdoaSwitch~0 A switch)
None
None
Bit Field Type
UlUuFlowCtrlSwitch UlUuFlowCtrlSwitch (UU flow control None ~0 switch)
PCI Collision Detection & SelfOptimization
Enumeration Type
OFF(Off), ON(On)
OFF~0, ON~1
None
Symbol Power Saving
Bit Field Type
SymbolShutdownS SymbolShutdownS witch(Symbol None witch~0 shutdown switch)
Flash CS Fallback to UTRAN Flash CS Fallback to GERAN
Bit Field Type
UTRAN_RIM_SWIT CH(UTRAN RIM Switch), GERAN_RIM_SWI TCH(GERAN RIM Switch)
UTRAN_RIM_SWIT CH~0, None GERAN_RIM_SWI TCH~1
Automatic Neighbour Relation Bit Field Type (ANR) Inter-RAT ANR
NBSLTEPLMNRou ndSwitch(NBSLTEP LMNRoundSwitch), NBSLTERANSharin gSwitch(NBSLTER ANSharingSwitch)
NBSLTEPLMNRou ndSwitch~0, None NBSLTERANSharin gSwitch~1
Mobility Management
Bit Field Type
UtranFreqLayerMea sSwitch(UtranFreqL ayerMeasSwitch), UtranFreqLayerBlin dSwitch(UtranFreqL ayerBlindSwitch)
UtranFreqLayerMea sSwitch~0, None UtranFreqLayerBlin dSwitch~1
None
Interval Type
1~65535
N/A
min
None
Interval Type
50~100
N/A
None
Interval Type
1~65535
N/A
min
None
Interval Type
49~99
N/A
RAN Sharing with Common Carrier
Interval Type
1~100
N/A
Enumeration Type
SHARING(Sharing), SHARING~0, DEDICATE(Dedicat DEDICATE~1 e)
None
Interval Type
0~100
N/A
Interval Type
0~100
N/A
Interval Type
0~100
N/A
Interval Type
0~100
N/A
Interval Type
0~100
N/A
Interval Type
0~100
N/A
Interval Type
0~100
N/A
Interval Type
0~100
N/A
Mobility Robust Interval Type Optimization(MRO)
1~70000
N/A
min
0~100
N/A
0~10000
N/A
None
1~60
N/A
0~100
N/A
0~100
N/A
-140~-44
N/A
dBm
-140~-44
N/A
dBm
None
Interval Type
0~9
N/A
None
None
Interval Type
0~100
N/A
None
Interval Type
0~100
N/A
None
Interval Type
0~50000
N/A
ms
None
Interval Type
0~50000
N/A
ms
None
Enumeration Type
OFF(Off), ON(On)
OFF~0, ON~1
None
Enumeration Type
OFF(Off), ON(On)
OFF~0, ON~1
None
Interval Type
0~4294967295
N/A
bit/s
Interval Type
1~255
N/A
ms
None
Interval Type
0~261120,275943~ N/A 307200
Ts
TCP Proxy Enhancer(TPE)
Interval Type
0~20
N/A
None
Interval Type
0~65535
N/A
None
Interval Type
0~65535
N/A
None
Interval Type
0~65535
N/A
None
Interval Type
0~65535
N/A
None
Interval Type
0~65535
N/A
None
Interval Type
0~65535
N/A
None
Interval Type
0~65535
N/A
None
Interval Type
0~65535
N/A
None
Interval Type
0~65535
N/A
None
Interval Type
0~65535
N/A
None
Interval Type
0~65535
N/A
None
Interval Type
0~65535
N/A
None
Interval Type
0~65535
N/A
None
Interval Type
0~65535
N/A
None
Interval Type
0~65535
N/A
None
Interval Type
0~65535
N/A
None
Interval Type
0~65535
N/A
None
Interval Type
0~65535
N/A
None
Interval Type
0~65535
N/A
None
Interval Type
0~65535
N/A
None
Self-configuration
Interval Type
0~195
N/A
None
Self-configuration
Enumeration Type
SGW, X2eNodeB
SGW~0, X2eNodeB~1
None
Self-configuration
Enumeration Type
NO(No), YES(Yes)
NO~0, YES~1
None
Self-configuration
Interval Type
0~127
N/A
None
Self-configuration
Interval Type
0~7
N/A
None
Self-configuration
Interval Type
0~1
N/A
None
Self-configuration
Interval Type
0~7
N/A
None
Self-configuration
Enumeration Type
IP(IP)
IP~1
None
Self-configuration
Interval Type
0~15
N/A
None
Self-configuration
Enumeration Type
BASE_BOARD(Bas e Board), E1_COVERBOARD (E1 Cover Board), BACK_BOARD(Bac k Board), ETH_COVERBOAR D(Ethernet Cover Board)
BASE_BOARD~0, E1_COVERBOARD ~3, None BACK_BOARD~4, ETH_COVERBOAR D~5
Self-configuration
Interval Type
0~15
N/A
None
Self-configuration
Enumeration Type
PPP(PPP Link), MPGRP(Multi-link PPP Group), ETH(Ethernet Port), ETHTRK(Ethernet Trunk), TUNNEL(Tunnel)
PPP~6, MPGRP~8, ETH~9, None ETHTRK~10, TUNNEL~15
Self-configuration Ipsec
1~15 characters
N/A
None
Interval Type
1~99
N/A
None
1~15 characters
N/A
None
Enumeration Type
X2(X2), S1(S1)
X2~0, S1~1
None
Enumeration Type
IKE_V1(IKE V1), IKE_V2(IKE V2)
IKE_V1~1, IKE_V2~2
None
Enumeration Type
MAIN(Main Mode), MAIN~2, AGGRESSIVE(Agg AGGRESSIVE~4 ressive Mode)
None
Password Type
0~127 characters
N/A
None
Enumeration Type
DISABLE(Disable), DISABLE~0, PERIODIC(Periodic PERIODIC~2 )
None
Interval Type
10~3600
N/A
Interval Type
3~30
N/A
Interval Type
3~10
N/A
None
Enumeration Type
DISABLE(Disable), PFS_GROUP1(768bit Diffie-Hellman DISABLE~0, Group), PFS_GROUP1~1, PFS_GROUP2(102 PFS_GROUP2~2 4-bit Diffie-Hellman Group)
None
Enumeration Type
GLOBAL(Global Configuration), LOCAL(Local Configuration)
GLOBAL~0, LOCAL~1
None
Interval Type
30~604800
N/A
Interval Type
0,1843200~429496 N/A 7295
KB
Interval Type
0~3
N/A
None
Self-configuration
1~15 characters
N/A
None
Self-configuration
IP Address Type
Valid IP address
N/A
None
Self-configuration IPsec
Enumeration Type
None
0~15 characters
N/A
None
0~15 characters
N/A
None
Self-configuration Reliability IP Address Type SCTP Multi-homing
Valid IP address
N/A
None
Enumeration Type
None
0~15 characters
N/A
None
0~15 characters
N/A
None
Self-configuration
Interval Type
1024~65535
N/A
None
Self-configuration
0~20 characters
N/A
None
Self-configuration
Interval Type
0~3
N/A
None
IPv4/IPv6 Dual Stack Self-configuration
Enumeration Type
None
Self-configuration
Interval Type
0~15
N/A
None
Self-configuration
IP Address Type
Valid IP address
N/A
None
Enumeration Type
None
0~15 characters
N/A
None
0~15 characters
N/A
None
Self-configuration
IP Address Type
Valid IP address
N/A
None
Enumeration Type
None
0~15 characters
N/A
None
0~15 characters
N/A
None
Self-configuration
Interval Type
1024~65535
N/A
None
Self-configuration
0~20 characters
N/A
None
Self-configuration
Interval Type
0~3
N/A
None
Self-configuration
Enumeration Type
None
Self-configuration
Interval Type
0~7
N/A
None
Self-configuration
Interval Type
0~1
N/A
None
Self-configuration
Interval Type
0~7
N/A
None
Self-configuration
1~15 characters
N/A
None
Self-configuration
IP Address Type
Valid IP address
N/A
None
Enumeration Type
None
IP Address Type
Valid IP address
N/A
None
Self-configuration
Enumeration Type
None
Self-configuration
Interval Type
0~3
N/A
None
Self-configuration
1~15 characters
N/A
None
Self-configuration
Interval Type
0~7
N/A
None
Self-configuration
Interval Type
0~1
N/A
None
Self-configuration
Interval Type
0~7
N/A
None
Self-configuration
IP Address Type
Valid IP address
N/A
None
Enumeration Type
None
IP Address Type
Valid IP address
N/A
None
Enumeration Type
None
Self-configuration
Interval Type
0~3
N/A
None
Self-configuration
Interval Type
0~7
N/A
None
Self-configuration
Interval Type
0~1
N/A
None
Self-configuration
Interval Type
0~7
N/A
None
Self-configuration
1~15 characters
N/A
None
Self-configuration
IP Address Type
Valid IP address
N/A
None
Enumeration Type
None
IP Address Type
Valid IP address
N/A
None
Self-configuration
IP Address Type
Valid IP address
N/A
None
Enumeration Type
None
IP Address Type
Valid IP address
N/A
None
Self-configuration
Interval Type
1024~65535
N/A
None
Self-configuration
Interval Type
10~59999
N/A
ms
Self-configuration
Interval Type
11~60000
N/A
ms
Self-configuration
Interval Type
10~59999
N/A
ms
Self-configuration
Interval Type
1~99
N/A
None
Self-configuration
Interval Type
1~99
N/A
None
Self-configuration
Interval Type
1000~60000
N/A
ms
Self-configuration
Interval Type
2~254
N/A
None
Self-configuration
Interval Type
1~253
N/A
None
Self-configuration
Enumeration Type
None
Self-configuration
Enumeration Type
None
Self-configuration
Enumeration Type
ALDER32(ALDER3 ALDER32~0, 2), CRC32(CRC32) CRC32~1
None
Self-configuration
Enumeration Type
None
Self-configuration
Interval Type
1~254
N/A
None
Self-configuration
Interval Type
10~500
N/A
ms
Self-configuration
Interval Type
0~3
N/A
None
Self-configuration
1~15 characters
N/A
None
Self-configuration
Interval Type
0~7
N/A
None
Self-configuration
Interval Type
0~1
N/A
None
Self-configuration
Interval Type
0~7
N/A
None
Self-configuration
IP Address Type
Valid IP address
N/A
None
Enumeration Type
None
IP Address Type
Valid IP address
N/A
None
Valid IP address
N/A
None
Enumeration Type
None
IP Address Type
Valid IP address
N/A
None
Self-configuration
Interval Type
1024~65535
N/A
None
Self-configuration
Interval Type
1000~60000
N/A
ms
Self-configuration
Interval Type
1000~60000
N/A
ms
Self-configuration
Interval Type
1000~60000
N/A
ms
Self-configuration
Interval Type
1~99
N/A
None
Self-configuration
Interval Type
1~99
N/A
None
Self-configuration
Interval Type
1000~60000
N/A
ms
Self-configuration
Interval Type
2~254
N/A
None
Self-configuration
Interval Type
1~253
N/A
None
Self-configuration
Enumeration Type
None
Self-configuration
Enumeration Type
None
Self-configuration
Enumeration Type
None
Self-configuration
Enumeration Type
None
Self-configuration
Interval Type
1~254
N/A
None
Self-configuration
Interval Type
0~3
N/A
None
Self-configuration
Interval Type
0~127
N/A
None
Self-configuration
IP Address Type
Valid IP address
N/A
None
Enumeration Type
None
0~15 characters
N/A
None
0~15 characters
N/A
None
Self-configuration
IP Address Type
Valid IP address
N/A
None
Enumeration Type
None
0~15 characters
N/A
None
0~15 characters
N/A
None
Self-configuration
IP Address Type
Valid IP address
N/A
None
Enumeration Type
None
0~15 characters
N/A
None
0~15 characters
N/A
None
Self-configuration
IP Address Type
Valid IP address
N/A
None
Enumeration Type
None
0~15 characters
N/A
None
0~15 characters
N/A
None
Self-configuration
0~20 characters
N/A
None
Self-configuration
Interval Type
0~3
N/A
None
Self-configuration
1~15 characters
N/A
None
Self-configuration
IP Address Type
Valid IP address
N/A
None
Enumeration Type
None
IPv4/IPv6 Dual Stack Self-configuration IPsec for IPv6
0~15 characters
N/A
None
0~15 characters
N/A
None
Self-configuration
IP Address Type
Valid IP address
N/A
None
Enumeration Type
None
0~15 characters
N/A
None
0~15 characters
N/A
None
Self-configuration
IP Address Type
Valid IP address
N/A
None
Enumeration Type
None
0~15 characters
N/A
None
0~15 characters
N/A
None
Self-configuration
IP Address Type
Valid IP address
N/A
None
Enumeration Type
None
0~15 characters
N/A
None
0~15 characters
N/A
None
0~20 characters
N/A
None
Self-configuration
Interval Type
0~3
N/A
None
Self-configuration
Interval Type
0~7
N/A
None
Self-configuration
Interval Type
0~1
N/A
None
Self-configuration
Interval Type
0~7
N/A
None
Self-configuration
1~15 characters
N/A
None
Self-configuration
IP Address Type
Valid IP address
N/A
None
Enumeration Type
None
Enumeration Type
None
IP Address Type
Valid IP address
N/A
None
Self-configuration
0~15 characters
N/A
None
0~15 characters
N/A
None
Self-configuration
Enumeration Type
None
Self-configuration
Interval Type
0~3
N/A
None
Self-configuration
Interval Type
0~7
N/A
None
Self-configuration
Interval Type
0~1
N/A
None
Self-configuration
Interval Type
0~7
N/A
None
Self-configuration
1~15 characters
N/A
None
Self-configuration
IP Address Type
Valid IP address
N/A
None
Enumeration Type
None
Enumeration Type
None
IP Address Type
Valid IP address
N/A
None
0~15 characters
N/A
None
0~15 characters
N/A
None
Self-configuration
IP Address Type
Valid IP address
N/A
None
Enumeration Type
None
Enumeration Type
None
Self-configuration
IP Address Type
Valid IP address
N/A
None
0~15 characters
N/A
None
0~15 characters
N/A
None
Self-configuration
Interval Type
1024~65535
N/A
None
Self-configuration
Interval Type
10~59999
N/A
ms
Self-configuration
Interval Type
11~60000
N/A
ms
Self-configuration
Interval Type
10~59999
N/A
ms
Self-configuration
Interval Type
1~99
N/A
None
Self-configuration
Interval Type
1~99
N/A
None
Self-configuration
Interval Type
1000~60000
N/A
ms
Self-configuration
Interval Type
2~254
N/A
None
Self-configuration
Interval Type
1~253
N/A
None
Self-configuration
Enumeration Type
None
Self-configuration
Enumeration Type
None
Self-configuration
Enumeration Type
None
Self-configuration
Enumeration Type
None
Self-configuration
Interval Type
1~254
N/A
None
Self-configuration
Interval Type
10~500
N/A
ms
Self-configuration
Interval Type
0~3
N/A
None
Self-configuration
Interval Type
16~79
N/A
None
Self-configuration
IP Address Type
Valid IP address
N/A
None
Enumeration Type
None
Enumeration Type
None
IP Address Type
Valid IP address
N/A
None
Self-configuration
IP Address Type
Valid IP address
N/A
None
Enumeration Type
None
Enumeration Type
None
IP Address Type
Valid IP address
N/A
None
Self-configuration
Interval Type
1024~65535
N/A
None
Self-configuration
IP Address Type
Valid IP address
N/A
None
Enumeration Type
None
Enumeration Type
None
IP Address Type
Valid IP address
N/A
None
Self-configuration
IP Address Type
Valid IP address
N/A
None
Enumeration Type
None
Enumeration Type
None
IP Address Type
Valid IP address
N/A
None
Self-configuration
IP Address Type
Valid IP address
N/A
None
Enumeration Type
None
Enumeration Type
None
IP Address Type
Valid IP address
N/A
None
Self-configuration
IP Address Type
Valid IP address
N/A
None
Enumeration Type
None
Enumeration Type
None
IP Address Type
Valid IP address
N/A
None
Self-configuration
0~0,3~3 characters N/A
None
Self-configuration
None
Self-configuration
Interval Type
0~1048575
N/A
None
Self-configuration
0~20 characters
N/A
None
Self-configuration
Interval Type
0~3
N/A
None
Self-configuration
Enumeration Type
None
Self-configuration
1~15 characters
N/A
None
Self-configuration
Interval Type
0~7
N/A
None
Self-configuration
Interval Type
0~1
N/A
None
Self-configuration
Interval Type
0~7
N/A
None
Self-configuration
IP Address Type
Valid IP address
N/A
None
Enumeration Type
None
Enumeration Type
None
IP Address Type
Valid IP address
N/A
None
0~15 characters
N/A
None
0~15 characters
N/A
None
Enumeration Type
None
Self-configuration
Interval Type
0~3
N/A
None
Self-configuration
1~15 characters
N/A
None
Self-configuration
Interval Type
0~7
N/A
None
Self-configuration
Interval Type
0~1
N/A
None
Self-configuration
Interval Type
0~7
N/A
None
Self-configuration
IP Address Type
Valid IP address
N/A
None
Enumeration Type
None
Enumeration Type
None
IP Address Type
Valid IP address
N/A
None
0~15 characters
N/A
None
0~15 characters
N/A
None
Valid IP address
N/A
None
Enumeration Type
None
Enumeration Type
None
IP Address Type
Valid IP address
N/A
None
0~15 characters
N/A
None
0~15 characters
N/A
None
Self-configuration
Interval Type
1024~65535
N/A
None
Self-configuration
Interval Type
1000~60000
N/A
ms
Self-configuration
Interval Type
1000~60000
N/A
ms
Self-configuration
Interval Type
1000~60000
N/A
ms
Self-configuration
Interval Type
1~99
N/A
None
Self-configuration
Interval Type
1~99
N/A
None
Self-configuration
Interval Type
1000~60000
N/A
ms
Self-configuration
Interval Type
2~254
N/A
None
Self-configuration
Interval Type
1~253
N/A
None
Self-configuration
Enumeration Type
None
Self-configuration
Enumeration Type
None
Self-configuration
Enumeration Type
None
Self-configuration
Enumeration Type
None
Self-configuration
Interval Type
1~254
N/A
None
Self-configuration
Interval Type
0~3
N/A
None
Self-configuration
1~15 characters
N/A
None
Self-configuration
IP Address Type
Valid IP address
N/A
None
Enumeration Type
None
Enumeration Type
None
IP Address Type
Valid IP address
N/A
None
Valid IP address
N/A
None
Enumeration Type
None
Enumeration Type
None
IP Address Type
Valid IP address
N/A
None
Self-configuration
Interval Type
1024~65535
N/A
None
Self-configuration
IP Address Type
Valid IP address
N/A
None
Enumeration Type
None
Enumeration Type
None
IP Address Type
Valid IP address
N/A
None
Self-configuration
IP Address Type
Valid IP address
N/A
None
Enumeration Type
None
Enumeration Type
None
IP Address Type
Valid IP address
N/A
None
Self-configuration
IP Address Type
Valid IP address
N/A
None
Enumeration Type
None
Enumeration Type
None
IP Address Type
Valid IP address
N/A
None
Self-configuration
IP Address Type
Valid IP address
N/A
None
Enumeration Type
None
Enumeration Type
None
IP Address Type
Valid IP address
N/A
None
Self-configuration
None
Self-configuration
None
Interval Type
0~1048575
N/A
None
Self-configuration
0~20 characters
N/A
None
Self-configuration
Interval Type
0~3
N/A
None
Enumeration Type
None
Public Key Infrastructure(PKI)
1~127 characters
N/A
None
1~128 characters
N/A
None
None
Enumeration Type
SHA1(SHA1), SHA256(SHA256)
SHA1~0, SHA256~2
None
Enumeration Type
ESN(ESN), MAC(MAC), IP(IP)
ESN~0, MAC~1, IP~2
None
0~32 characters
N/A
None
None
0~64 characters
N/A
None
0~64 characters
N/A
None
0~128 characters
N/A
None
0~128 characters
N/A
None
Bit Field Type
DATA_ENCIPHER MENT(DATA_ENCI PHERMENT), DIGITAL_SIGNATU RE(DIGITAL_SIGN ATURE), KEY_AGREEMENT (KEY_AGREEMEN T), KEY_ENCIPHERM ENT(KEY_ENCIPH ERMENT)
DATA_ENCIPHER MENT~0, DIGITAL_SIGNATU RE~1, None KEY_AGREEMENT ~2, KEY_ENCIPHERM ENT~3
Enumeration Type
SHA1(SHA1), MD5(MD5), SHA256(SHA256)
SHA1~0, MD5~1, SHA256~2
None
Enumeration Type
KEYSIZE1024(KEY SIZE1024), KEYSIZE1024~0, KEYSIZE2048(KEY KEYSIZE2048~1 SIZE2048)
None
0~128 characters
N/A
None
IP Address Type
Valid IP address
N/A
None
1~64 characters
N/A
None
Public Key Infrastructure(PKI) Public Key Infrastructure(PKI) Public Key Infrastructure(PKI) Public Key Infrastructure(PKI) Public Key Infrastructure(PKI)
Character String Type Character String Type Character String Type Character String Type Character String Type
0~128 characters
N/A
None
0~128 characters
N/A
None
0~128 characters
N/A
None
0~128 characters
N/A
None
0~128 characters
N/A
None
Enumeration Type
IKE(IKE), SSL(SSL) IKE~0, SSL~1
None
1~64 characters
N/A
None
Public Key Infrastructure(PKI) Public Key Infrastructure(PKI)
0~128 characters
N/A
None
0~128 characters
N/A
None
0~128 characters
N/A
None
0~128 characters
N/A
None
0~15 characters
N/A
None
0~128 characters
N/A
None
Enumeration Type
NORMALLY(NORM ALLY), NORMALLY~0, ABNORMALITY(AB ABNORMALITY~1, None NORMALITY), FILENOTEXIST~2 FILENOTEXIST(Fil e not exist)
Enumeration Type
IKE(IKE), SSL(SSL) IKE~0, SSL~1
None
1~64 characters
N/A
None
Public Key Infrastructure(PKI) Public Key Infrastructure(PKI) Public Key Infrastructure(PKI) Public Key Infrastructure(PKI)
Character String Type Character String Type Character String Type Character String Type
0~128 characters
N/A
None
0~128 characters
N/A
None
0~128 characters
N/A
None
0~128 characters
N/A
None
Enumeration Type
0~128 characters
N/A
None
1~64 characters
N/A
None
Public Key Infrastructure(PKI) Public Key Infrastructure(PKI) Public Key Infrastructure(PKI) Public Key Infrastructure(PKI)
Character String Type Character String Type Character String Type Character String Type
0~128 characters
N/A
None
0~128 characters
N/A
None
0~128 characters
N/A
None
0~128 characters
N/A
None
Enumeration Type
0~128 characters
N/A
None
1~64 characters
N/A
None
Enumeration Type
NORMAL(Normal), CERTLOSS(Certific ate Loss), CERTDAMAGE(Ce rtificate Damage), UNKNOWFORMAT (Unknow File Format), FAILED(Other failed Reason) 0~128 characters 0~128 characters
NORMAL~0, CERTLOSS~1, CERTDAMAGE~2, None UNKNOWFORMAT ~3, FAILED~4
Public Key Infrastructure(PKI) Public Key Infrastructure(PKI) Public Key Infrastructure(PKI)
N/A N/A
None None
0~128 characters
N/A
None
IP Address Type
Valid IP address
N/A
None
0~255 characters
N/A
None
Password Type
0~255 characters
N/A
None
Interval Type
0~65535
N/A
None
1~64 characters
N/A
None
Enumeration Type
None
Interval Type
8~240
N/A
Interval Type
0~3
N/A
None
Enumeration Type
FTP(FTP), LDAP(LDAP)
FTP~0, LDAP~1
None
0~255 characters
N/A
None
Enumeration Type
None
Interval Type
1~15
N/A
day
Interval Type
7~180
N/A
day
Enumeration Type
PROXY(PROXY), CMP(CMP)
PROXY~0, CMP~1 None
Enumeration Type
NOVERIFY(No Verifying), ALARM(Send an NOVERIFY~0, Alarm If Verifying ALARM~1, CRL Failed), DISCONNECT~2 DISCONNECT(Disc onnect If Verifying CRL Failed)
None
IPsec Access Control List Interval Type (ACL)
3000~4999
N/A
None
IPsec Character String Access Control List Type (ACL)
0~127 characters
N/A
None
IPv4/IPv6 Dual Stack Interval Type Access Control List (ACL) IPv4/IPv6 Dual Stack Character String Access Control List Type (ACL) IPsec Access Control List Interval Type (ACL) IPsec Access Control List Interval Type (ACL)
3000~3999
N/A
None
0~127 characters
N/A
None
3000~4999
N/A
None
1~65535
N/A
None
IPsec Access Control List Enumeration Type (ACL)
DENY(Deny), PERMIT(Permit)
DENY~0, PERMIT~1
None
IP(IP), ICMP(ICMP), TCP(TCP), UDP(UDP), SCTP(SCTP)
IP~0, ICMP~1, TCP~6, UDP~17, SCTP~132
None
IPsec Access Control List IP Address Type (ACL)
Valid IP address
N/A
None
IPsec Wildcard Mask Access Control List Type (ACL)
Valid wildcard of the N/A IP address
None
NO(No), YES(Yes)
NO~0, YES~1
None
OP_LT(Less or Equal), OP_GT(Greater or Equal), OP_EQ(Equivalent) , OP_NEQ(Not Equivalent), OP_RANGE(Range )
OP_LT~1, OP_GT~2, OP_EQ~3, OP_NEQ~4, OP_RANGE~5
None
0~65535
N/A
None
0~65535
N/A
None
IPsec Access Control List IP Address Type (ACL)
Valid IP address
N/A
None
IPsec Wildcard Mask Access Control List Type (ACL)
Valid wildcard of the N/A IP address
None
NO(No), YES(Yes)
NO~0, YES~1
None
None
0~65535
N/A
None
0~65535
N/A
None
NO(No), YES(Yes)
NO~0, YES~1
None
0~63
N/A
None
NO(No), YES(Yes)
NO~0, YES~1
None
OP_EQ(Equivalent) , OP_EQ~0, OP_RANGE(Range OP_RANGE~1 )
None
1~4094
N/A
None
1~4094
N/A
None
IPv4/IPv6 Dual Stack Interval Type Access Control List (ACL) IPv4/IPv6 Dual Stack Interval Type Access Control List (ACL)
3000~3999
N/A
None
1~65535
N/A
None
IPv4/IPv6 Dual Stack Enumeration Type Access Control List (ACL)
DENY(Deny), PERMIT(Permit)
DENY~0, PERMIT~1
None
IPv4/IPv6 Dual Stack Enumeration Type Access Control List (ACL) IPv4/IPv6 Dual Stack IP Address Type Access Control List (ACL)
IP6(IPv6), TCP(TCP), UDP(UDP), ICMP6(ICMP6), SCTP(SCTP) Valid IP address
IP6~0, TCP~6, UDP~17, ICMP6~58, SCTP~132
None
N/A
None
IPv4/IPv6 Dual Stack Interval Type Access Control List (ACL)
0~128
N/A
None
NO(No), YES(Yes)
NO~0, YES~1
None
None
0~65535
N/A
None
0~65535
N/A
None
IPv4/IPv6 Dual Stack IP Address Type Access Control List (ACL)
Valid IP address
N/A
None
0~128
N/A
None
NO(No), YES(Yes)
NO~0, YES~1
None
None
0~65535
N/A
None
0~65535
N/A
None
IPv4/IPv6 Dual Stack Enumeration Type Access Control List (ACL) IPv4/IPv6 Dual Stack Interval Type Access Control List (ACL)
NO(No), YES(Yes)
NO~0, YES~1
None
0~63
N/A
None
Bidirectional Forwarding Detection
Interval Type
0~7
N/A
None
Interval Type
0~1
N/A
None
Interval Type
0~7
N/A
None
Interval Type
0~95
N/A
None
IP Address Type
Valid IP address
N/A
None
IP Address Type
Valid IP address
N/A
None
Enumeration Type
SINGLE_HOP(Singl e Hop), SINGLE_HOP~0, MULTI_HOP(Multipl MULTI_HOP~1 e Hops)
None
Interval Type
10~1000
N/A
ms
Interval Type
10~1000
N/A
ms
Interval Type
3~10
N/A
None
Enumeration Type
MAINTENANCE(M aintenance), MAINTENANCE~0, None RELIABILITY(Relia RELIABILITY~1 bility)
Interval Type
0~63
N/A
None
Enumeration Type
NO(No), YES(Yes)
NO~0, YES~1
None
Bidirectional Forwarding Detection Bidirectional Forwarding Detection
Enumeration Type
ADMINDOWN(Adm ADMINDOWN~0, in Down), DOWN~1, INIT~2, DOWN(Down), UP~3 INIT(Init), UP(Up) DEMAND_MODE(D emand Mode), ASYNCHRONOUS _MODE(Asynchron ous Mode)
None
Enumeration Type
DEMAND_MODE~ 1, None ASYNCHRONOUS _MODE~2
Bidirectional Forwarding Detection Bidirectional Forwarding Detection Bidirectional Forwarding Detection
Interval Type
10~1000
N/A
ms
Interval Type
10~1000
N/A
ms
Interval Type
0~4294967295
N/A
ms
Interval Type
0~4294967295
N/A
None
Bidirectional Forwarding Detection Bidirectional Forwarding Detection Bidirectional Forwarding Detection Bidirectional Forwarding Detection
Interval Type
0~4294967295
N/A
None
Interval Type
0~4294967295
N/A
None
Interval Type
0~4294967295
N/A
None
Interval Type
0~4294967295
N/A
None
Enumeration Type
NO_DIAGNOSTIC( No Diagnostic), CTRL_DECT_TIME _EXPIRED(Control Detection Time Expired), ECHO_FUNC_FAIL ED(Echo Function Failed), NEIGHBOR_SIG_S ESSION_DOWN(N eighbor Signaled Session Down), FORDWARDING_P LANE_RESET(For warding Plane Reset), PATH_DOWN(Path Down), CONCATENATED_ PATH_DOWN(Con catenated Path Down), ADMIN_DOWN(Ad ministratively Down), REVERSE_CONCA TENTATED_PATH _DOWN(Reverse Concatenated Path Down), PEER_ADMIN_DO WN(Peer Administratively
NO_DIAGNOSTIC~ 0, CTRL_DECT_TIME _EXPIRED~1, ECHO_FUNC_FAIL ED~2, NEIGHBOR_SIG_S ESSION_DOWN~3, FORDWARDING_P LANE_RESET~4, None PATH_DOWN~5, CONCATENATED_ PATH_DOWN~6, ADMIN_DOWN~7, REVERSE_CONCA TENTATED_PATH _DOWN~8, PEER_ADMIN_DO WN~9
Interval Type
0~15
N/A
None
Enumeration Type
DRAFT4(DRAFT4), DRAFT4~0, STANDARD(STAN STANDARD~1 DARD)
None
Enumeration Type
DEFAULT(Default), DEFAULT~0, SPECIFIC(Specific) SPECIFIC~1
None
Interval Type
0~7
N/A
None
Interval Type
0~1
N/A
None
Interval Type
0~7
N/A
None
Ethernet OAM(IEEE Character String 802.1ag) Type
1~43 characters
N/A
None
1~43 characters
N/A
None
Ethernet OAM(IEEE Interval Type 802.1ag)
1~8191
N/A
None
Ethernet OAM(IEEE IP Address Type 802.1ag)
Valid IP address
N/A
None
1~43 characters
N/A
None
1~43 characters
N/A
None
0~7
N/A
None
0~1
N/A
None
0~7
N/A
None
Ethernet OAM(IEEE Enumeration Type 802.1ag)
NO(No), YES(Yes)
NO~0, YES~1
None
1~4094
N/A
None
0~7
N/A
None
10ms(10ms), 100ms(100ms), 1s(1s), 10s(10s), 1min(1min), 10min(10min) 0~32
10ms~2, 100ms~3, 1s~4, 10s~5, None 1min~6, 10min~7
Ethernet OAM(IEEE Interval Type 802.1ag) Ethernet OAM(IEEE Interval Type 802.1ag)
N/A
None
0~64
N/A
None
0~4294967295 0~4294967295
N/A N/A
None None
1~43 characters
N/A
None
0~7
N/A
None
0~4294967295
N/A
None
None
N/A
None
1~43 characters
N/A
None
1~43 characters
N/A
None
1~8191
N/A
None
0~7
N/A
None
0~1
N/A
None
0~7
N/A
None
BASE_BOARD(Bas e Board), BASE_BOARD~0, ETH_COVERBOAR ETH_COVERBOAR None D(Ethernet Cover D~5 Board)
ETH(Ethernet Port), ETHTRK(Ethernet ETH~3, ETHTRK~4 None Trunk)
0~5
N/A
None
None
NO(No), YES(Yes)
NO~0, YES~1
None
1~4094
N/A
None
0~7
N/A
None
0~4294967295
N/A
None
0~4294967295
N/A
None
Ethernet OAM(IEEE Interval Type 802.1ag) Ethernet OAM(IEEE Interval Type 802.1ag) Ethernet OAM(IEEE Interval Type 802.1ag) Ethernet OAM(IEEE Interval Type 802.1ag) Ethernet OAM(IEEE Interval Type 802.1ag)
0~4294967295
N/A
None
0~4294967295
N/A
None
0~4294967295
N/A
None
0~4294967295
N/A
None
0~4294967295
N/A
None
0~4294967295
N/A
None
0~4294967295
N/A
None
0~4294967295
N/A
None
1~43 characters
N/A
None
1~43 characters
N/A
None
1~8191
N/A
None
Ethernet OAM(IEEE Compound Type 802.1ag)
14 characters
N/A
None
Ethernet OAM(IEEE Enumeration Type 802.1ag) Ethernet OAM(IEEE Compound Type 802.1ag)
NORMAL(Normal), NORMAL~1, FAULT(Fault) FAULT~2 14 characters N/A
None
None
NO(No), YES(Yes)
NO~0, YES~1
None
0~4294967295
N/A
None
0~4294967295
N/A
None
0~4
N/A
None
Ethernet OAM(IEEE IP Address Type 802.1ag)
Valid IP address
N/A
None
Integrated Firewall
Enumeration Type
TCP(TCP Protocol), TCP~6, UDP~17 UDP(UDP Protocol)
None
Integrated Firewall
Enumeration Type
22(22), 23(23), 67(67), 68(68), 80(80), 319(319), 320(320), 443(443), 500(500), 1110(1110), 1120(1120), 2700(2700), 3784(3784), 4443(4443), 4500(4500), 4784(4784), 6000(6000), 6001(6001), 6006(6006), 6007(6007), 17185(17185), 30023(30023), 33003(33003), 45300(45300)
22~22, 23~23, 67~67, 68~68, 80~80, 319~319, 320~320, 443~443, 500~500, 1110~1110, 1120~1120, 2700~2700, 3784~3784, 4443~4443, None 4500~4500, 4784~4784, 6000~6000, 6001~6001, 6006~6006, 6007~6007, 17185~17185, 30023~30023, 33003~33003, 45300~45300
Integrated Firewall
Enumeration Type
None
None
Interval Type
0~7
N/A
None
None
Interval Type
0~1
N/A
None
None
Interval Type
0~7
N/A
None
None
Enumeration Type
BASE_BOARD(Bas e Board), E1_COVERBOARD (E1 Cover Board), ETH_COVERBOAR D(Ethernet Cover Board)
BASE_BOARD~0, E1_COVERBOARD ~3, None ETH_COVERBOAR D~5
None
Enumeration Type
PPP(PPP Link), MPGRP(Multi-link PPP Group), ETH(Ethernet Port), ETHTRK(Ethernet Trunk), LOOPINT(Loopbac k Interface)
PPP~0, MPGRP~2, ETH~3, None ETHTRK~4, LOOPINT~6
None
Interval Type
0~15
N/A
None
None
IP Address Type
Valid IP address
N/A
None
None
Subnet Mask Type
Valid Mask address N/A
None
IPv4/IPv6 Dual Stack
Interval Type
1~65535
N/A
None
IP Address Type
Valid IP address
N/A
None
Interval Type
1~128
N/A
None
Enumeration Type
IP6_DAD_OK(Valid ), IP6_DAD_TENTATI VE(Tentative), IP6_DAD_DUPLIC ATED(Duplicate), IP6_DAD_UNKNO W(Unknown)
IP6_DAD_OK~1, IP6_DAD_TENTATI VE~2, IP6_DAD_DUPLIC None ATED~4, IP6_DAD_UNKNO W~8
Interval Type
0~4294967295
N/A
Interval Type
0~4294967295
N/A
None
Enumeration Type
None
Chain Topology Tree Topology Self-configuration
IP Address Type
Valid IP address
N/A
None
Self-configuration
Enumeration Type
None
DiffServ QoS Support
Enumeration Type
IPPRECEDENCE(I IPPRECEDENCE~ P Precedence), None 0, DSCP~1 DSCP(DSCP)
Interval Type
0~63
N/A
None
Interval Type
0~63
N/A
None
Interval Type
0~63
N/A
None
Interval Type
0~63
N/A
None
Interval Type
0~63
N/A
None
Enumeration Type
HQ(High Quality), LQ(Low Quality)
HQ~0, LQ~1
None
Interval Type
0~100
N/A
Interval Type
0~1000
N/A
Interval Type
0~63
N/A
None
Enumeration Type
HQ~0, LQ~1
None
Interval Type
0~100
N/A
Interval Type
0~1000
N/A
Interval Type
0~63
N/A
None
Enumeration Type
HQ~0, LQ~1
None
Interval Type
0~100
N/A
Interval Type
0~1000
N/A
Interval Type
0~63
N/A
None
Enumeration Type
HQ~0, LQ~1
None
Interval Type
0~100
N/A
Interval Type
0~1000
N/A
Interval Type
0~63
N/A
None
Enumeration Type
HQ~0, LQ~1
None
Interval Type
0~100
N/A
Interval Type
0~1000
N/A
Interval Type
0~63
N/A
None
Enumeration Type
HQ~0, LQ~1
None
Interval Type
0~100
N/A
Interval Type
0~1000
N/A
Interval Type
0~63
N/A
None
Enumeration Type
HQ~0, LQ~1
None
Interval Type
0~100
N/A
Interval Type
0~1000
N/A
Interval Type
0~63
N/A
None
Enumeration Type
HQ~0, LQ~1
None
Interval Type
0~100
N/A
Interval Type
0~1000
N/A
Interval Type
0~63
N/A
None
Enumeration Type
HQ~0, LQ~1
None
Interval Type
0~100
N/A
Interval Type
0~1000
N/A
None
Enumeration Type
OFF(Off), ON(On)
OFF~0, ON~1
None
None
Enumeration Type
OFF(Off), ON(On)
OFF~0, ON~1
None
None
Interval Type
0~7
N/A
None
None
Interval Type
0~1
N/A
None
None
Interval Type
0~7
N/A
None
None
Enumeration Type
Access Control based on 802.1x
Interval Type
0~5
N/A
None
Enumeration Type
EAP-TLS(EAP-TLS EAP-TLS~13 authentic method)
None
Interval Type
0~4294967295
N/A
None
Interval Type
0~4294967295
N/A
None
Enumeration Type
NULL(NULL), LIC_OFF(License Off), NOTIFY_FAIL(Notifi cation Authentication Failed), NO_CERT(Certifica te Not Exist), PORT_DOWN(Tran sport Not Activated)
NULL~0, LIC_OFF~1, NOTIFY_FAIL~2, NO_CERT~3, PORT_DOWN~6
None
Interval Type
0~4294967295
N/A
None
Enumeration Type
UNAUTHENTICAT ED(Unauthenticated ), AUTHENTICATING (Authenticating), AUTHENTIC_SUC CEED(Authenticate Succeed), AUTHENTIC_FAIL( Authenticate Fail), DHCP_AUTHENTI CATING(DHCP Activation Authenticating)
UNAUTHENTICAT ED~0, AUTHENTICATING ~1, AUTHENTIC_SUC None CEED~2, AUTHENTIC_FAIL~ 3, DHCP_AUTHENTI CATING~4
Interval Type
0~4294967295
N/A
None
Interval Type
0~4294967295
N/A
None
Interval Type
0~63
N/A
None
VLAN Support (IEEE 802.1p/q)
Interval Type
0~7
N/A
None
None
Interval Type
0~7
N/A
None
None
Interval Type
0~1
N/A
None
None
Interval Type
0~7
N/A
None
None
Interval Type
0~7,255
N/A
None
None
Enumeration Type
ALLPORT(All Ports), ALLPORT~0, SINGLEPORT(Sing SINGLEPORT~1 le Port)
None
None
Enumeration Type
E1_UNBA(E1 Unbalance), E1_BA(E1 Balance), T1(T1)
E1_UNBA~0, E1_BA~1, T1~2
None
None
Enumeration Type
E1_DOUBLE_FRA ME(E1 Double Frames), E1_CRC4_MULTI_ FRAME(E1 CRC4 Multiple Frames), T1_SUPER_FRAM E(T1 Super Frames), T1_EXTENDED_S UPER_FRAME(T1 Extended Super Frames)
E1_DOUBLE_FRA ME~0, E1_CRC4_MULTI_ FRAME~1, None T1_SUPER_FRAM E~2, T1_EXTENDED_S UPER_FRAME~3
None
Enumeration Type
HDB3(E1 HDB3 Code), AMI(E1/T1 AMI Code), B8ZS(T1 B8ZS Code)
HDB3~0, AMI~1, B8ZS~2
None
None
Enumeration Type
MASTER(Master Mode), SLAVE(Slave Mode)
MASTER~0, SLAVE~1
None
None
Enumeration Type
OK(Available), LOCAL_LOOP(Loc al Loop), REMOTE_LOOP(R emote Loop), PAYLOAD_LOOP( Payload Loop), SINGLE_CH_LOO P(Single Channel Loop), LOS(Loss of Signal), AIS(Alarm Indication Signal), LFA(Loss of Frame Alignment), RA(Remote Alarm Indication), LMFA(Loss of Multiframe Alignment), SLIP(Slip), OTHERS(Other Fault), BACKUP(Backup), PHYSICAL_LOOP( Physical Loop) EXECUTELINKTES TFlAG_0(No Test), EXECUTELINKTES TFlAG_1(Offline Test), EXECUTELINKTES TFlAG_2(Online Test) NO(No), YES(Yes)
OK~0, LOCAL_LOOP~1, REMOTE_LOOP~2 , PAYLOAD_LOOP~ 3, SINGLE_CH_LOO P~4, LOS~5, None AIS~6, LFA~7, RA~8, LMFA~9, SLIP~10, OTHERS~11, BACKUP~12, PHYSICAL_LOOP~ 13
None
Enumeration Type
EXECUTELINKTES TFlAG_0~0, EXECUTELINKTES None TFlAG_1~1, EXECUTELINKTES TFlAG_2~2
None
Enumeration Type
NO~0, YES~1
None
None
Interval Type
0~720
N/A
min
None
Enumeration Type
BASE_BOARD(Bas BASE_BOARD~0, e Board), E1_COVERBOARD None E1_COVERBOARD ~3 (E1 Cover Board)
None
Enumeration Type
E1_UNBA(E1 Unbalance), E1_BA(E1 Balance), T1(T1), UNKNOWN(Unkno wn) E1_DOUBLE_FRA ME(E1 Double Frames), E1_CRC4_MULTI_ FRAME(E1 CRC4 Multiple Frames), T1_SUPER_FRAM E(T1 Super Frames), T1_EXTENDED_S UPER_FRAME(T1 Extended Super Frames), E1_MODIFY_CRC4 _MULTIFRAME(Mo dify CRC4 Multiple Frames), UNKNOWN(Unkno wn) HDB3(E1 HDB3 Code), AMI(E1/T1 AMI Code), B8ZS(T1 B8ZS Code), UNKNOWN(Unkno wn) 1E-3(1E-3), 1E4(1E-4), 1E-5(1E5), 1E-6(1E-6)
E1_UNBA~0, E1_BA~1, T1~2, None UNKNOWN~42949 67294
None
Enumeration Type
E1_DOUBLE_FRA ME~0, E1_CRC4_MULTI_ FRAME~1, T1_SUPER_FRAM E~2, None T1_EXTENDED_S UPER_FRAME~3, E1_MODIFY_CRC4 _MULTIFRAME~4, UNKNOWN~42949 67294
None
Enumeration Type
HDB3~0, AMI~1, B8ZS~2, None UNKNOWN~42949 67294
None
Enumeration Type
1E-3~3, 1E-4~4, 1ENone 5~5, 1E-6~6
Ethernet OAM(IEEE Interval Type 802.3ah)
0~7
N/A
None
0~1
N/A
None
0~7
N/A
None
Ethernet OAM(IEEE Enumeration Type 802.3ah)
ETH(Ethernet Port) ETH~3
None
0~5
N/A
None
PASSIVE(Passive Mode), ACTIVE(Active Mode)
PASSIVE~0, ACTIVE~1
None
10,20,50,100,200,5 N/A 00,1000
ms
64~1518
N/A
byte
None
Ethernet OAM(IEEE Enumeration Type 802.3ah) Ethernet OAM(IEEE Interval Type 802.3ah)
None
1~60
N/A
1~65535
N/A
None
10~900
N/A
1~900
N/A
None
OAM3AH_SESSIO N_IDLE(Idle Phase), OAM3AH_SESSIO N_DISCOVER(Disc over Phase), OAM3AH_SESSIO N_DETECT(Detect Phase), OAM3AH_SESSIO N_LB_LOCAL(Loop back Response Phase), OAM3AH_SESSIO N_LB_REMOTE(Lo opback Start Phase) 0~4294967295
OAM3AH_SESSIO N_IDLE~0, OAM3AH_SESSIO N_DISCOVER~1, OAM3AH_SESSIO None N_DETECT~2, OAM3AH_SESSIO N_LB_LOCAL~3, OAM3AH_SESSIO N_LB_REMOTE~4
Ethernet OAM(IEEE Interval Type 802.3ah) Ethernet OAM(IEEE Interval Type 802.3ah) Ethernet OAM(IEEE Interval Type 802.3ah) Ethernet OAM(IEEE Interval Type 802.3ah)
N/A
None
0~4294967295
N/A
None
0~4294967295
N/A
None
0~4294967295
N/A
None
0~4294967295
N/A
None
0~4294967295
N/A
None
0~4294967295
N/A
None
0~4294967295
N/A
None
0~4294967295
N/A
None
0~4294967295
N/A
None
0~4294967295
N/A
None
0~4294967295
N/A
None
None
Interval Type
0~7
N/A
None
None
Interval Type
0~1
N/A
None
None
Interval Type
0~7
N/A
None
None
Enumeration Type
None
Interval Type
0~5
N/A
None
None
Enumeration Type
COPPER(Copper), FIBER(Fiber), COPPER~0, None AUTO(Automatic FIBER~1, AUTO~2 Detection)
None
Interval Type
46~1800
N/A
byte
None
Enumeration Type
10M(10M), 100M(100M), 1000M(1000M), AUTO(Automatic Negotiation)
10M~0, 100M~1, None 1000M~2, AUTO~3
None
Enumeration Type
FULL(Full Duplex), AUTO(Automatic Negotiation)
FULL~1, AUTO~2
None
None
Enumeration Type
None
None
Enumeration Type
CLOSE(Close), OPEN(Open)
CLOSE~0, OPEN~1
None
None
Interval Type
0~100
N/A
per mill
None
Interval Type
0~100
N/A
per mill
None
Compound Type
14 characters
N/A
None
None
Enumeration Type
UP(Up), DOWN(Down) NOLOOP(No Loop), REMOTE(Remote Loopback), LOCAL(Local Loopback), UNKNOWN(Unkno wn)
UP~0, DOWN~1
None
None
Enumeration Type
NOLOOP~0, REMOTE~1, LOCAL~2, UNKNOWN~3
None
None
Enumeration Type
NO(No), YES(Yes)
NO~0, YES~1
None
None
Enumeration Type
None
None
Interval Type
0~4294967295
N/A
packet
None
Interval Type
0~4294967295
N/A
byte
None
Interval Type
0~4294967295
N/A
packet
None
Interval Type
0~4294967295
N/A
byte/s
None
Interval Type
0~4294967295
N/A
packet
None
Interval Type
0~4294967295
N/A
byte
None
Interval Type
0~10
N/A
byte/s
None
Interval Type
0~4294967295
N/A
None
None
IP Address Type
Valid IP address
N/A
None
None
Enumeration Type
FORCE(Force), AUTO(Automatic Negotiation) FORCE(Force), AUTO(Automatic Negotiation) 10M(10M), 100M(100M), 1000M(1000M), AUTO(Automatic Negotiation)
FORCE~0, AUTO~1 FORCE~0, AUTO~1
None
None
Enumeration Type
None
None
Enumeration Type
10M~0, 100M~1, None 1000M~2, AUTO~3
None
Enumeration Type
HALF(Half Duplex), FULL(Full Duplex), HALF~0, FULL~1, AUTO(Automatic AUTO~2 Negotiation)
None
None
Enumeration Type
FORCE(Force), AUTO(Automatic FORCE~0, Negotiation), AUTO~1, UNKNOWN(Unkno UNKNOWN~2 wn)
None
None
Enumeration Type
10M(10M), 100M(100M), 1000M(1000M), 10M~0, 100M~1, AUTO(Automatic 1000M~2, AUTO~3, None Negotiation), UNKNOWN~4 UNKNOWN(Unkno wn) HALF(Half Duplex), FULL(Full Duplex), HALF~0, FULL~1, AUTO(Automatic AUTO~2, Negotiation), UNKNOWN~3 UNKNOWN(Unkno wn)
None
Enumeration Type
None
None
Enumeration Type
UP(Up), DOWN(Down)
UP~0, DOWN~1
None
Ethernet Link Aggregation(IEEE 802.3ad)
Interval Type
0~7
N/A
None
Interval Type
0~1
N/A
None
Interval Type
0~7
N/A
None
Interval Type
0~2
N/A
None
Enumeration Type
DISABLE(Disable LACP), ENABLE(Enable LACP)
DISABLE~0, ENABLE~1
None
Enumeration Type
None
Enumeration Type
Interval Type
46~1800
N/A
byte
Enumeration Type
UP(Up), DOWN(Down)
UP~0, DOWN~1
None
Compound Type
14 characters
N/A
None
Compound Type
14 characters
N/A
None
Ethernet Link Aggregation(IEEE 802.3ad) Ethernet Link Aggregation(IEEE 802.3ad) Ethernet Link Aggregation(IEEE 802.3ad) Ethernet Link Aggregation(IEEE 802.3ad)
Interval Type
0~2
N/A
None
0~7 characters
N/A
None
Interval Type
0~2
N/A
None
0~7 characters
N/A
None
Interval Type
0~4294967295
N/A
packet
Interval Type
0~4294967295
N/A
byte
Ethernet Link Aggregation(IEEE 802.3ad) Ethernet Link Aggregation(IEEE 802.3ad)
Interval Type
0~4294967295
N/A
packet
Interval Type
0~4294967295
N/A
byte
Interval Type
0~4294967295
N/A
packet
Interval Type
0~4294967295
N/A
byte
Interval Type
0~4294967295
N/A
packet
Interval Type
0~4294967295
N/A
byte
Ethernet Link Aggregation(IEEE 802.3ad) Ethernet Link Aggregation(IEEE 802.3ad)
Interval Type
0~4294967295
N/A
None
IP Address Type
Valid IP address
N/A
None
Interval Type
0~7
N/A
None
Interval Type
0~1
N/A
None
Interval Type
0~7
N/A
None
Interval Type
0~2
N/A
None
Interval Type
0~5
N/A
None
Interval Type
0~255
N/A
None
Enumeration Type
NO(No), YES(Yes)
NO~0, YES~1
None
Enumeration Type
Enumeration Type
UP(Up), DOWN(Down)
UP~0, DOWN~1
None
Compound Type
14 characters
N/A
None
Enumeration Type
SHORT(Short Timeout), LONG(Long Timeout), NULL(NULL)
SHORT~0, LONG~1, NULL~255
None
Enumeration Type
SHORT(Short Timeout), LONG(Long Timeout), NULL(NULL)
SHORT~0, LONG~1, NULL~255
None
Interval Type
0~4294967295
N/A
packet
Interval Type
0~4294967295
N/A
packet
None
Interval Type
10~254
N/A
None
None
Interval Type
0~39
N/A
None
None
Interval Type
0~39
N/A
None
None
Interval Type
0~63
N/A
None
None
Interval Type
0~100
N/A
None
Enumeration Type
HQ~0, LQ~1
None
None
Interval Type
0~100
N/A
None
Interval Type
0~1000
N/A
Integrated Firewall
Enumeration Type
ARP(ARP), ICMP(ICMP), TCP(TCP), SYN(SYN), UDP(UDP)
ARP~0, ICMP~1, TCP~2, SYN~3, UDP~4
None
Integrated Firewall
Enumeration Type
None
Integrated Firewall
Interval Type
1~4096
N/A
packet/s
Integrated Firewall
Enumeration Type
None
Integrated Firewall
Interval Type
1~4096
N/A
packet/s
Integrated Firewall
Interval Type
0~4294967295
N/A
None
Integrated Firewall
Interval Type
0~4294967295
N/A
None
Transport Overbooking
Enumeration Type
None
Enhanced Transmission QoS Management
Enumeration Type
SINGLE_RATE(Sin gle Rate), SINGLE_RATE~0, DUAL_RATE(Dual DUAL_RATE~1 Rate)
None
Interval Type
0~1200
N/A
IPsec
0~31 characters
N/A
None
IPsec
Interval Type
0,20~28800
N/A
IPsec
Interval Type
0,60~28800
N/A
IPsec
Interval Type
0~63
N/A
None
IPsec
Interval Type
0~7
N/A
None
IPsec
Interval Type
0~1
N/A
None
IPsec
Interval Type
0~7
N/A
None
IPsec
1~15 characters
N/A
None
IPsec
Interval Type
1~99
N/A
None
IPsec
Enumeration Type
IKE_V1~1, IKE_V2~2
None
IPsec
Enumeration Type
None
IPsec
Enumeration Type
IP(IP Identify), FQDN(Name Identify)
IP~1, FQDN~2
None
IPsec
IP Address Type
Valid IP address
N/A
None
IPsec
0~31 characters
N/A
None
IPsec
Password Type
0~127 characters
N/A
None
IPsec
Enumeration Type
None
IPsec
Interval Type
10~3600
N/A
IPsec
Interval Type
3~30
N/A
IPsec
Interval Type
3~10
N/A
None
IPsec
IP Address Type
Valid IP address
N/A
None
IPsec
Interval Type
0~7
N/A
None
IPsec
Interval Type
0~1
N/A
None
IPsec
Interval Type
0~7
N/A
None
IPv4/IPv6 Dual Stack IPsec for IPv6
1~15 characters
N/A
None
Interval Type
1~99
N/A
None
Enumeration Type
IKE_V1~1, IKE_V2~2
None
Enumeration Type
None
Enumeration Type
FQDN(Name Identify), IPV6(IPv6 FQDN~2, IPV6~5 Identify)
None
IP Address Type
Valid IP address
N/A
None
0~31 characters
N/A
None
Password Type
0~127 characters
N/A
None
Enumeration Type
None
Interval Type
10~3600
N/A
Interval Type
3~30
N/A
Interval Type
3~10
N/A
None
IP Address Type
Valid IP address
N/A
None
IPv4/IPv6 Dual Stack IPsec for IPv6 IPv4/IPv6 Dual Stack IPsec for IPv6 IPv4/IPv6 Dual Stack IPsec for IPv6
Interval Type
0~7
N/A
None
Interval Type
0~1
N/A
None
Interval Type
0~7
N/A
None
IPsec
Interval Type
1~99
N/A
None
IPsec
Enumeration Type
DES(DES), 3DES(3DES), AES128(AES128), AES192(AES192), AES256(AES256)
DES~2, 3DES~3, AES128~11, AES192~12, AES256~13
None
IPsec
Enumeration Type
MD5(MD5), SHA1(SHA1), MD5~4, SHA1~5, AES_XCBC_96(AE AES_XCBC_96~6 S_XCBC_96)
None
IPsec
Enumeration Type
PRE_SHARED_KE Y(Pre-shared Key), PRE_SHARED_KE IKE_RSA_SIG(RSA Y~8, None Digital Certificate IKE_RSA_SIG~9 Signature)
IPsec
Enumeration Type
DH_GROUP1(768bit Diffie-Hellman Group), DH_GROUP2(1024bit Diffie-Hellman DH_GROUP1~6, Group), DH_GROUP2~7, None DH_GROUP14(204 DH_GROUP14~14, 8-bit Diffie-Hellman DH_GROUP15~15 Group), DH_GROUP15(307 2-bit Diffie-Hellman Group)
IPsec
Interval Type
60~604800
N/A
IPsec
Enumeration Type
HMAC_MD5(HMAC _MD5), HMAC_MD5~14, HMAC_SHA1(HMA HMAC_SHA1~15, None C_SHA1), AES128_XCBC~18 AES128_XCBC(AE S128_XCBC)
IPsec
Interval Type
0~7
N/A
None
IPsec
Interval Type
0~1
N/A
None
IPsec
Interval Type
0~7
N/A
None
IP-Based Multimode CoTransmission on BS Interval Type side(eNodeB) 2G/3G and LTE Cotransmission
0~7
N/A
None
0~1
N/A
None
IP-Based Multimode CoTransmission on BS Interval Type side(eNodeB) 2G/3G and LTE Cotransmission IP-Based Multimode CoTransmission on BS Interval Type side(eNodeB) 2G/3G and LTE Cotransmission
0~7
N/A
None
0~15
N/A
None
IP-Based Multimode CoTransmission on BS IP Address Type side(eNodeB) 2G/3G and LTE Cotransmission
Valid IP address
N/A
None
IP-Based Multimode CoTransmission on BS Subnet Mask Type side(eNodeB) 2G/3G and LTE Cotransmission
None
IP-Based Multimode CoTransmission on BS Enumeration Type side(eNodeB) 2G/3G and LTE Cotransmission
IP(IP)
IP~1
None
0~15
N/A
None
Integrated Firewall
Enumeration Type
None
Integrated Firewall
Interval Type
10~1000
N/A
None
Integrated Firewall
Enumeration Type
None
Integrated Firewall
Enumeration Type
None
Integrated Firewall
Interval Type
20~200000
N/A
packet/s
Integrated Firewall
Enumeration Type
None
Integrated Firewall
Interval Type
1~100000
N/A
packet/s
Integrated Firewall
Enumeration Type
PPP(PPP Link), MPGRP(Multi-link PPP Group), ETH(Ethernet Port), ETHTRK(Ethernet Trunk), LOOPINT(Loopbac k Interface) 0~15 14 characters
PPP~0, MPGRP~2, ETH~3, None ETHTRK~4, LOOPINT~6
Integrated Firewall Integrated Firewall
Interval Type Compound Type
N/A N/A
None None
Integrated Firewall
Compound Type
14 characters
N/A
None
Integrated Firewall
Interval Type
0~4294967295
N/A
None
Integrated Firewall
Enumeration Type
IPV4(IPv4), ARP(ARP), RARP(RARP), IPV6(IPv6), 802_1X(802.1X), LLDP(LLDP), 1588V2(1588V2), CFM(CFM), LACP(LACP), 3AH(3AH)
IPV4~2048, ARP~2054, RARP~2101, IPV6~34525, 802_1X~34958, LLDP~35020, 1588V2~35063, CFM~35074, LACP~8915201, 3AH~8915203
None
Integrated Firewall
IP Address Type
Valid IP address
N/A
None
Integrated Firewall
IP Address Type
Valid IP address
N/A
None
Integrated Firewall
Enumeration Type
ICMP(ICMP), TCP(TCP), UDP(UDP), SCTP(SCTP)
ICMP~1, TCP~6, UDP~17, SCTP~132
None
Integrated Firewall
Interval Type
0~4294967295
N/A
None
Integrated Firewall
Interval Type
0~4294967295
N/A
None
Integrated Firewall
0~200 characters
N/A
None
Interval Type
1~65535
N/A
None
Enumeration Type
NORMAL(Normal), NORMAL~0, VLAN(Vlan) VLAN~1
None
Interval Type
0~7
N/A
None
Interval Type
0~1
N/A
None
Interval Type
6~7
N/A
None
Enumeration Type
BASE_BOARD(Bas BASE_BOARD~0 e Board)
None
Enumeration Type
ETH(Ethernet Port), TRUNK(Ethernet ETH~3, TRUNK~4, Trunk), None LOOPIF~6 LOOPIF(Loopback Interface)
Interval Type
0~5
N/A
None
Interval Type
1~4094
N/A
None
IPv4/IPv6 Dual Stack IPv4/IPv6 Dual Stack IPv4/IPv6 Dual Stack
Interval Type
1280~1800
N/A
byte
Enumeration Type
UP(UP), DOWN(Down) Valid IP address
UP~1, DOWN~2
None
IP Address Type
N/A
None
Interval Type
0~8
N/A
None
IP Address Type
Valid IP address
N/A
None
Interval Type
0~8
N/A
None
IP Address Type
Valid IP address
N/A
None
Enumeration Type
None
Interval Type
0~4294967295
N/A
None
Interval Type
0~4294967295
N/A
ms
Interval Type
0~4294967295
N/A
ms
Enumeration Type
None
Enumeration Type
None
None
Interval Type
0~65535
N/A
None
None
Interval Type
0~7
N/A
None
None
Interval Type
0~1
N/A
None
None
Interval Type
0~7
N/A
None
None
Enumeration Type
None
Interval Type
0~15
N/A
None
None
Enumeration Type
QOS(QOS), ANY(ANY)
QOS~0, ANY~1
None
None
Interval Type
0~63
N/A
None
None
IP Address Type
Valid IP address
N/A
None
None
IP Address Type
Valid IP address
N/A
None
None
Interval Type
0~79
N/A
None
None
Enumeration Type
HQ~0, LQ~1
None
None
Enumeration Type
S1(S1), X2(X2)
S1~0, X2~1
None
None
Enumeration Type
None
None
Interval Type
0~4294967294
N/A
Kbit/s
None
Interval Type
0~4294967294
N/A
Kbit/s
None
Interval Type
0~4294967294
N/A
Kbit/s
None
Interval Type
0~4294967294
N/A
Kbit/s
None
Interval Type
0~4294967295
N/A
Kbit/s
None
Interval Type
0~4294967295
N/A
Kbit/s
None
Enumeration Type
NORMAL(Normal), FAULT(Fault), CHECK_DISABLE D(IP Path Check Disabled)
NORMAL~0, FAULT~1, CHECK_DISABLE D~2
None
None
Interval Type
0~15
N/A
None
None
0~47 characters
N/A
None
None
Enumeration Type
None
Enumeration Type
None
IPv4/IPv6 Dual Stack S1 and X2 over IPv6 IPv4/IPv6 Dual Stack S1 and X2 over IPv6 IPv4/IPv6 Dual Stack S1 and X2 over IPv6 IPv4/IPv6 Dual Stack S1 and X2 over IPv6
Interval Type
0~65535
N/A
None
Enumeration Type
None
Interval Type
0~15
N/A
None
Interval Type
1~65535
N/A
None
IPv4/IPv6 Dual Stack S1 and X2 over IPv6
Enumeration Type
QOS(QOS), ANY(ANY)
QOS~0, ANY~1
None
Interval Type
0~63
N/A
None
IP Address Type
Valid IP address
N/A
None
IP Address Type
Valid IP address
N/A
None
Interval Type
0~79
N/A
None
None
Enumeration Type
S1(S1), X2(X2)
S1~0, X2~1
None
Enumeration Type
None
IPv4/IPv6 Dual Stack S1 and X2 over IPv6 IPv4/IPv6 Dual Stack S1 and X2 over IPv6 IPv4/IPv6 Dual Stack S1 and X2 over IPv6 IPv4/IPv6 Dual Stack S1 and X2 over IPv6 IPv4/IPv6 Dual Stack S1 and X2 over IPv6 IPv4/IPv6 Dual Stack S1 and X2 over IPv6 IPv4/IPv6 Dual Stack S1 and X2 over IPv6 IPv4/IPv6 Dual Stack S1 and X2 over IPv6
Interval Type
0~4294967295
N/A
Kbit/s
Interval Type
0~4294967295
N/A
Kbit/s
Interval Type
0~4294967295
N/A
Kbit/s
Interval Type
0~4294967295
N/A
Kbit/s
Interval Type
0~4294967295
N/A
Kbit/s
Interval Type
0~4294967295
N/A
Kbit/s
Enumeration Type
NORMAL(Normal), FAULT(Fault), CHECK_DISABLE D(IP Path Check Disabled) 0~47 characters
NORMAL~0, FAULT~1, CHECK_DISABLE D~2
None
N/A
None
None
IP Address Type
Valid IP address
N/A
None
None
IP Address Type
Valid IP address
N/A
None
None
Enumeration Type
HQ~0, LQ~1
None
None
IP Address Type
Valid IP address
N/A
None
IP Performance Monitoring
Interval Type
0~65535
N/A
None
IP Address Type
Valid IP address
N/A
None
IP Address Type
Valid IP address
N/A
None
Interval Type
0~63
N/A
None
Enumeration Type
UP(Uplink), BIDIR(Bidirection)
UP~1, BIDIR~2
None
Interval Type
0~10000
N/A
ms
Interval Type
-10000~10000
N/A
ms
Interval Type
-10000~10000
N/A
ms
Interval Type
0~1000
N/A
per mill
Interval Type
0~1000
N/A
per mill
Enumeration Type
IDLE(IDLE), ACTING(ACTING), PMUP(IP PM UP), DEACTING(DEACT ING), UNKNOWN(NULL) IDLE(IDLE), ACTING(ACTING), PMUP(IP PM UP), DEACTING(DEACT ING), UNKNOWN(NULL)
IDLE~0, ACTING~1, PMUP~2, DEACTING~3, UNKNOWN~255 IDLE~0, ACTING~1, PMUP~2, DEACTING~3, UNKNOWN~255
None
Enumeration Type
None
Enumeration Type
FOUR_TUPLE(FO UR_TUPLE), FOUR_TUPLE~0, THREE_TUPLE(TH THREE_TUPLE~2 REE_TUPLE)
None
Enumeration Type
NO(No), YES(Yes)
NO~0, YES~1
None
Interval Type
0~65535
N/A
None
IP Performance Monitoring IP Performance Monitoring IP Performance Monitoring
Enumeration Type
NO(No), YES(Yes)
NO~0, YES~1
None
Interval Type
0~4294967295
N/A
None
Interval Type
0~4294967295
N/A
None
None
Compound Type
None
N/A
None
None
Enumeration Type
NO(No), YES(Yes)
NO~0, YES~1
None
None
Interval Type
0~4294967295
N/A
None
None
Interval Type
0~4294967295
N/A
None
None
Compound Type
None
N/A
None
None
Enumeration Type
IPPMVER_V1(Versi on 1.0), IPPMVER_V1~1, IPPMVER_V2(Versi IPPMVER_V2~2 on 2.0)
None
None
Interval Type
0~7
N/A
None
None
Interval Type
0~1
N/A
None
None
Interval Type
0~7
N/A
None
None
Enumeration Type
None
Enumeration Type
PPP(PPP Link), MPGRP(Multi-link PPP Group), TUNNEL(Tunnel)
PPP~0, MPGRP~2, None TUNNEL~8
None
Interval Type
0~15
N/A
None
None
Enumeration Type
NEXTHOP(Next Hop), IF(Exit Interface)
NEXTHOP~0, IF~1 None
None
IP Address Type
Valid IP address
N/A
None
None
Subnet Mask Type
None
None
IP Address Type
Valid IP address
N/A
None
None
Interval Type
1~255
N/A
None
None
Enumeration Type
STATICHOST(Stati c Host Route), STATICGATEWAY( Static Gateway Route), HOST(Dynamic Host Route), GATEWAY(Dynami c Gateway Route)
STATICHOST~1, STATICGATEWAY None ~2, HOST~3, GATEWAY~4
None
0~47 characters
N/A
None
None
Enumeration Type
PPP(PPP Link), MPGRP(Multi-link PPP Group), ETH(Ethernet Port), ETHTRK(Ethernet Trunk), LOOPINT(Loopbac k Interface), VI(Virtual Interface), TUNNEL(Tunnel) 0~32
PPP~0, MPGRP~2, ETH~3, ETHTRK~4, None LOOPINT~6, VI~7, TUNNEL~8
None
Interval Type
N/A
None
IP Address Type
Valid IP address
N/A
None
Interval Type
0~128
N/A
None
Enumeration Type
NEXTHOP(Next Hop)
NEXTHOP~0
None
Enumeration Type
IPADDR6_TYPE_G LOBAL_UNICAST( Global Unicast Address), IPADDR6_TYPE_LI NK_LOCAL(Link Local Address)
IPADDR6_TYPE_G LOBAL_UNICAST~ 0, None IPADDR6_TYPE_LI NK_LOCAL~2
IP Address Type
Valid IP address
N/A
None
Interval Type
1~65535
N/A
None
Interval Type
1~255
N/A
None
Enumeration Type
STATICHOST(Stati c Host Route), STATICGATEWAY( Static Gateway Route), HOST(Dynamic Host Route), GATEWAY(Dynami c Gateway Route)
STATICHOST~1, STATICGATEWAY None ~2, HOST~3, GATEWAY~4
0~47 characters
N/A
None
IPsec
Interval Type
0~7
N/A
None
IPsec
Interval Type
0~1
N/A
None
Ipsec
Interval Type
0~7
N/A
None
IPsec
Enumeration Type
IPsec
Enumeration Type
ETH(Ethernet Port), ETHTRK(Ethernet ETH~3, ETHTRK~4 None Trunk)
IPsec
Interval Type
0~5
N/A
None
IPsec
1~15 characters
N/A
None
Interval Type
1~65535
N/A
None
1~15 characters
N/A
None
IPsec
Interval Type
0~49
N/A
None
IPsec
1~15 characters
N/A
None
IPsec
Interval Type
1~10000
N/A
None
IPsec
1~15 characters
N/A
None
IPsec
Interval Type
1~10000
N/A
None
IPsec
Interval Type
0~95
N/A
None
IPsec
Interval Type
0~95
N/A
None
IPsec
Enumeration Type
MASTER(Master IPSec Policy), SLAVE(Slave IPSec Policy)
MASTER~0, SLAVE~1
None
IPsec
1~15 characters
N/A
None
IPsec
Interval Type
1~10000
N/A
None
IPsec
Interval Type
3000~3999
N/A
None
IPsec
1~15 characters
N/A
None
IPsec
1~15 characters
N/A
None
IPsec
Enumeration Type
None
IPsec
Enumeration Type
GLOBAL~0, LOCAL~1
None
IPsec
Interval Type
30~604800
N/A
IPsec
Interval Type
0,1843200~429496 N/A 7295
KB
IPsec
Interval Type
0~7
N/A
None
IPsec
Interval Type
0~1
N/A
None
IPsec
Interval Type
0~7
N/A
None
IPsec
Enumeration Type
WND_DISABLE(0), WND_32(32), WND_64(64), WND_128(128), WND_256(256), WND_512(512), WND_1024(1024), WND_2048(2048), WND_4096(4096)
WND_DISABLE~0, WND_32~1, WND_64~2, WND_128~128, WND_256~256, None WND_512~512, WND_1024~1024, WND_2048~2048, WND_4096~4096
1~15 characters
N/A
None
Interval Type
1~10000
N/A
None
Enumeration Type
IPV4~4, IPV6~6
None
Interval Type
3000~3999
N/A
None
Interval Type
3000~3999
N/A
None
1~15 characters
N/A
None
1~15 characters
N/A
None
Enumeration Type
None
Enumeration Type
GLOBAL~0, LOCAL~1
None
Interval Type
30~604800
N/A
Interval Type
0,1843200~429496 N/A 7295
KB
Interval Type
0~7
N/A
None
Interval Type
0~1
N/A
None
Interval Type
0~7
N/A
None
IPsec
1~15 characters
N/A
None
IPsec
Enumeration Type
TUNNEL(Tunnel), TUNNEL~0, TRANSPORT(Tran TRANSPORT~1 sport)
None
IPsec
Enumeration Type
AH(AH Protocol), ESP(ESP Protocol), AH~0, ESP~1, AH_ESP(AH/ESP AH_ESP~2 Protocol)
None
IPsec
Enumeration Type
MD5(MD5), SHA1(SHA1), AESMD5~1, SHA1~2, XCBC-MACAES-XCBC-MAC96(AES-XCBC96~5, SHA256~12 MAC-96), SHA256(SHA256)
None
IPsec
Enumeration Type
NULL(NULL), MD5(MD5), SHA1(SHA1), AESXCBC-MAC96(AES-XCBCMAC-96), SHA256(SHA256)
NULL~0, MD5~1, SHA1~2, AESXCBC-MAC-96~5, SHA256~12
None
IPsec
Enumeration Type
NULL(NULL), DES(DES), 3DES(3DES), AES128(AES128), AES192(AES192), AES256(AES256)
NULL~0, DES~1, 3DES~2, AES128~6, AES192~7, AES256~8
None
IPsec
Interval Type
0~7
N/A
None
IPsec
Interval Type
0~1
N/A
None
IPsec
Interval Type
0~7
N/A
None
None
Enumeration Type
None
None
Enumeration Type
UP(Up), DOWN(Down)
UP~0, DOWN~1
None
None
Interval Type
0~4294967295
N/A
packet
None
Interval Type
0~4294967295
N/A
packet
None
Interval Type
0~4294967295
N/A
packet
None
Interval Type
0~4294967295
N/A
packet
None
IP Address Type
Valid IP address
N/A
None
None
Subnet Mask Type
None
IP Address Type
Valid IP address
N/A
None
Interval Type
1~128
N/A
None
Enumeration Type
IP6_DAD_OK(Valid ), IP6_DAD_TENTATI VE(Tentative), IP6_DAD_DUPLIC ATED(Duplicate), IP6_DAD_UNKNO W(Unknown)
IP6_DAD_OK~1, IP6_DAD_TENTATI VE~2, IP6_DAD_DUPLIC None ATED~4, IP6_DAD_UNKNO W~8
Interval Type
0~4294967295
N/A
Interval Type
0~4294967295
N/A
Transport Overbooking Transport Differentiated Flow Control Transport Overbooking Transport Differentiated Flow Control Transport Overbooking Transport Differentiated Flow Control
Interval Type
0~7
N/A
None
Interval Type
0~1
N/A
None
Interval Type
0~7
N/A
None
Transport Overbooking Transport Differentiated Flow Control
Enumeration Type
MPGRP(Multi-link PPP Group), MPGRP~2, ETH~3, ETH(Ethernet Port), ETHTRK~4, None ETHTRK(Ethernet TUNNEL~8 Trunk), TUNNEL(Tunnel)
Interval Type
0~5
N/A
None
Enumeration Type
None
Interval Type
32~1000000
N/A
Kbit/s
Interval Type
32~1000000
N/A
Kbit
Interval Type
0~1000000
N/A
Kbit
Enumeration Type
Interval Type
32~1000000
N/A
Kbit/s
ML-PPP/MC-PPP
Interval Type
0~7
N/A
None
ML-PPP/MC-PPP
Interval Type
0~1
N/A
None
ML-PPP/MC-PPP
Interval Type
0~7
N/A
None
ML-PPP/MC-PPP
Interval Type
0~3
N/A
None
ML-PPP/MC-PPP
Enumeration Type
None
ML-PPP/MC-PPP
Enumeration Type
NONAUTH(No Authentication), PAP(PAP Authentication), CHAP(CHAP Authentication)
NONAUTH~0, PAP~1, CHAP~2
None
ML-PPP/MC-PPP
1~67 characters
N/A
None
ML-PPP/MC-PPP
Password Type
1~19 characters
N/A
None
ML-PPP/MC-PPP
IP Address Type
Valid IP address
N/A
None
ML-PPP/MC-PPP
Subnet Mask Type
None
ML-PPP/MC-PPP
IP Address Type
Valid IP address
N/A
None
ML-PPP/MC-PPP
Enumeration Type
LONG(Long), SHORT(Short)
LONG~0, SHORT~1
None
ML-PPP/MC-PPP
Enumeration Type
None
ML-PPP/MC-PPP
Interval Type
128~1500
N/A
byte
ML-PPP/MC-PPP
Interval Type
1~512
N/A
byte
ML-PPP/MC-PPP
Interval Type
3~1500
N/A
byte
ML-PPP/MC-PPP
Interval Type
1~1000
N/A
ms
ML-PPP/MC-PPP
Interval Type
4,8
N/A
None
ML-PPP/MC-PPP
Enumeration Type
None
ML-PPP/MC-PPP
Interval Type
0~1000
N/A
per mill
ML-PPP/MC-PPP
Interval Type
0~1000
N/A
per mill
ML-PPP/MC-PPP
Enumeration Type
UP(Up), DOWN(Down) INITIAL(INITIAL), STARTING(STARTI NG), CLOSED(CLOSED) , STOPPED(STOPP ED), CLOSING(CLOSIN G), STOPPING(STOPP ING), REQSENT(REQSE NT), ACKRCVD(ACKRC VD), ACKSENT(ACKSE NT), OPENED(OPENED ) INITIAL(INITIAL), STARTING(STARTI NG), CLOSED(CLOSED) , STOPPED(STOPP ED), CLOSING(CLOSIN G), STOPPING(STOPP ING), REQSENT(REQSE NT), ACKRCVD(ACKRC VD), ACKSENT(ACKSE NT), OPENED(OPENED )
UP~1, DOWN~2
None
ML-PPP/MC-PPP
Enumeration Type
INITIAL~1, STARTING~2, CLOSED~3, STOPPED~4, CLOSING~5, STOPPING~6, REQSENT~7, ACKRCVD~8, ACKSENT~9, OPENED~10
None
ML-PPP/MC-PPP
Enumeration Type
None
ML-PPP/MC-PPP
IP Address Type
Valid IP address
N/A
None
ML-PPP/MC-PPP
IP Address Type
Valid IP address
N/A
None
ML-PPP/MC-PPP
IP Address Type
Valid IP address
N/A
None
ML-PPP/MC-PPP
Enumeration Type
None
ML-PPP/MC-PPP
Interval Type
128~1500
N/A
byte
ML-PPP/MC-PPP
Enumeration Type
DISABLE(Disable), DISABLE~0, ENABLE(Enable) ENABLE~1 DISABLE(Disable), DISABLE~0, ENABLE(Enable) ENABLE~1
None
ML-PPP/MC-PPP
Enumeration Type
None
ML-PPP/MC-PPP
Enumeration Type
DISABLE(Disable), DISABLE~0, ENABLE(Enable) ENABLE~1 DISABLE(Disable), DISABLE~0, ENABLE(Enable) ENABLE~1 0~4294967295 N/A
None
ML-PPP/MC-PPP
Enumeration Type
None
ML-PPP/MC-PPP
Interval Type
packet
ML-PPP/MC-PPP ML-PPP/MC-PPP ML-PPP/MC-PPP
0~4294967295 0~4294967295 0~4294967295
N/A N/A N/A
packet byte/s byte/s
ML-PPP/MC-PPP
Interval Type
0~4294967295
N/A
None
ML-PPP/MC-PPP
IP Address Type
Valid IP address
N/A
None
ML-PPP/MC-PPP
Enumeration Type
ML-PPP/MC-PPP
Interval Type
0~4294967295
N/A
byte
ML-PPP/MC-PPP
Interval Type
0~4294967295
N/A
packet
ML-PPP/MC-PPP
Interval Type
0~4294967295
N/A
byte
ML-PPP/MC-PPP
Interval Type
0~4294967295
N/A
packet
ML-PPP/MC-PPP
Interval Type
0~7
N/A
None
ML-PPP/MC-PPP
Interval Type
0~1
N/A
None
ML-PPP/MC-PPP
Interval Type
0~7
N/A
None
ML-PPP/MC-PPP
Interval Type
0~15
N/A
None
ML-PPP/MC-PPP
Interval Type
0~3
N/A
None
ML-PPP/MC-PPP
Interval Type
0~1
N/A
None
ML-PPP/MC-PPP
Interval Type
0~7
N/A
None
ML-PPP/MC-PPP
Interval Type
0~7
N/A
None
ML-PPP/MC-PPP
Bit Field Type
TS1(Time Slot 1), TS2(Time Slot 2), TS3(Time Slot 3), TS4(Time Slot 4), TS5(Time Slot 5), TS6(Time Slot 6), TS7(Time Slot 7), TS8(Time Slot 8), TS9(Time Slot 9), TS10(Time Slot10), TS11(Time Slot11), TS12(Time Slot12), TS13(Time Slot13), TS14(Time Slot14), TS15(Time Slot15), TS16(Time Slot16), TS17(Time Slot17), TS18(Time Slot18), TS19(Time Slot19), TS20(Time Slot20), TS21(Time Slot21), TS22(Time Slot22), TS23(Time Slot23), TS24(Time Slot24), TS25(Time Slot25), TS26(Time Slot26), TS27(Time Slot27), TS28(Time Slot28), TS29(Time Slot29), TS30(Time Slot30), TS31(Time Slot31)
TS1~0, TS2~1, TS3~2, TS4~3, TS5~4, TS6~5, TS7~6, TS8~7, TS9~8, TS10~9, TS11~10, TS12~11, TS13~12, TS14~13, TS15~14, TS16~15, None TS17~16, TS18~17, TS19~18, TS20~19, TS21~20, TS22~21, TS23~22, TS24~23, TS25~24, TS26~25, TS27~26, TS28~27, TS29~28, TS30~29, TS31~30
ML-PPP/MC-PPP
Interval Type
128~1500
N/A
byte
ML-PPP/MC-PPP
Enumeration Type
None
ML-PPP/MC-PPP
Enumeration Type
None
ML-PPP/MC-PPP
Interval Type
1~65535
N/A
ms
ML-PPP/MC-PPP
Enumeration Type
ML-PPP/MC-PPP
Enumeration Type
ML-PPP/MC-PPP
Enumeration Type
UP(Up), DOWN(Down) INITIAL(INITIAL), STARTING(STARTI NG), CLOSED(CLOSED) , STOPPED(STOPP ED), CLOSING(CLOSIN G), STOPPING(STOPP ING), REQSENT(REQSE NT), ACKRCVD(ACKRC VD), ACKSENT(ACKSE NT), OPENED(OPENED )
UP~1, DOWN~2
None
ML-PPP/MC-PPP
Enumeration Type
None
ML-PPP/MC-PPP
Interval Type
128~1500
N/A
byte
ML-PPP/MC-PPP
Enumeration Type
None
ML-PPP/MC-PPP
Enumeration Type
None
ML-PPP/MC-PPP
Enumeration Type
ML-PPP/MC-PPP
Interval Type
0~4294967295
N/A
packet
ML-PPP/MC-PPP
Interval Type
0~4294967295
N/A
byte
ML-PPP/MC-PPP
Interval Type
0~4294967295
N/A
packet
ML-PPP/MC-PPP
Interval Type
0~4294967295
N/A
packet
ML-PPP/MC-PPP
Interval Type
0~4294967295
N/A
byte
ML-PPP/MC-PPP
Interval Type
0~4294967295
N/A
packet
Centralized M2000 Management
Enumeration Type
MASTER(Master), SLAVE(Slave)
MASTER~0, SLAVE~1
None
IP Address Type
Valid IP address
N/A
None
IP Address Type
Valid IP address
N/A
None
IP Address Type
Valid IP address
N/A
None
IP Address Type
Valid IP address
N/A
None
Interval Type
0~7
N/A
None
Interval Type
0~1
N/A
None
Interval Type
0~7
N/A
None
Enumeration Type
IPV4(IPV4)
IPV4~1
None
Enumeration Type
NO(No), YES(Yes)
NO~0, YES~1
None
IP Address Type
Valid IP address
N/A
None
IP Address Type
Valid IP address
N/A
None
Enumeration Type
NEXTHOP(Next Hop), IF(Exit Interface)
NEXTHOP~0, IF~1 None
Enumeration Type
PPP(PPP Link), MPGRP(Multi-link PPP Group), TUNNEL(Tunnel)
PPP~0, MPGRP~2, None TUNNEL~8
Interval Type
0~14
N/A
None
Interval Type
1~255
N/A
None
IP Address Type
Valid IP address
N/A
None
Enumeration Type
NORMAL(Normal), ABNORMAL(Abnor NORMAL~0, mal), ABNORMAL~1, UNKNOWN(Unkno UNKNOWN~2 wn)
None
Enumeration Type
INUSE(In Use), UNUSED(Unused)
INUSE~0, UNUSED~1
None
Enumeration Type
BASE_BOARD(Bas e Board), BACK_BOARD(Bac k Board), ETH_COVERBOAR D(Ethernet Cover Board)
BASE_BOARD~0, BACK_BOARD~4, None ETH_COVERBOAR D~5
IPv4/IPv6 Dual Stack Centralized M2000 Management
IP Address Type
Valid IP address
N/A
None
IP Address Type
Valid IP address
N/A
None
Enumeration Type
NORMAL(Normal), ABNORMAL(Abnor NORMAL~0, mal), ABNORMAL~1, UNKNOWN(Unkno UNKNOWN~2 wn)
None
Integrated Firewall
Interval Type
0~7
N/A
None
Integrated Firewall
Interval Type
0~1
N/A
None
Integrated Firewall
Interval Type
0~7
N/A
None
Integrated Firewall
Enumeration Type
ETH(Ethernet Port), ETH~3, ETHTRK(Ethernet ETHTRK~4, Trunk), TUNNEL~8 TUNNEL(Tunnel)
None
Integrated Firewall
Interval Type
0~14
N/A
None
Integrated Firewall
Interval Type
3000~3999
N/A
None
Integrated Firewall
Enumeration Type
PERMIT(Permit), DENY(Deny)
PERMIT~0, DENY~1
None
Integrated Firewall
Enumeration Type
BASE_BOARD(Bas e Board), BACK_BOARD(Bac k Board), ETH_COVERBOAR D(Ethernet Cover Board)
BASE_BOARD~0, BACK_BOARD~4, None ETH_COVERBOAR D~5
Integrated Firewall
Interval Type
0~4294967295
N/A
packet
Integrated Firewall
Interval Type
0~4294967295
N/A
packet
Integrated Firewall
Interval Type
0~4294967295
N/A
packet
Integrated Firewall
Interval Type
0~4294967295
N/A
packet
Integrated Firewall
Interval Type
0~4294967295
N/A
packet
Integrated Firewall
Interval Type
0~4294967295
N/A
packet
Integrated Firewall
Interval Type
0~4294967295
N/A
byte
Integrated Firewall
Interval Type
0~4294967295
N/A
byte
Integrated Firewall
Interval Type
0~4294967295
N/A
byte
Integrated Firewall
Interval Type
0~4294967295
N/A
byte
Integrated Firewall
Interval Type
0~4294967295
N/A
byte
Integrated Firewall
Interval Type
0~4294967295
N/A
byte
Integrated Firewall
Interval Type
0~4294967295
N/A
byte
Integrated Firewall
Interval Type
0~4294967295
N/A
packet
Integrated Firewall
Interval Type
4000~4999
N/A
None
Integrated Firewall
Enumeration Type
ADV_ACL(Only Advanced ACL), L2_ACL(Only Layer ADV_ACL~0, 2 ACL), L2_ACL~1, ADV_AND_L2(Adv ADV_AND_L2~2 anced ACL and Layer 2 ACL)
None
Integrated Firewall
IP Address Type
Valid IP address
N/A
None
Integrated Firewall
Subnet Mask Type
None
Enumeration Type
PASSIVE(Passive Mode), ACTIVE(Active Mode)
PASSIVE~0, ACTIVE~1
None
Interval Type
49152~65535
N/A
None
Interval Type
500~5000
N/A
ms
Interval Type
5~60,65535
N/A
min
Interval Type
0~63
N/A
None
Integrated Firewall
Interval Type
0~7
N/A
None
Integrated Firewall
Interval Type
0~1
N/A
None
Integrated Firewall
Interval Type
0~7
N/A
None
Integrated Firewall
Enumeration Type
Integrated Firewall
Enumeration Type
ETH(Ethernet Port), ETH~0, E1T1~1 E1T1(E1/T1 Port)
None
Integrated Firewall
Interval Type
0~7
N/A
None
Integrated Firewall
Enumeration Type
None
Compression & Multiplexing over E1/T1 PPP MUX
Interval Type
0~7
N/A
None
Compression & Multiplexing over E1/T1 PPP MUX Compression & Multiplexing over E1/T1 PPP MUX
Interval Type
0~1
N/A
None
Interval Type
0~7
N/A
None
Interval Type
0~15
N/A
None
Interval Type
0~7
N/A
None
Enumeration Type
NONAUTH(No Authentication), PAP(PAP Authentication), CHAP(CHAP Authentication)
NONAUTH~0, PAP~1, CHAP~2
None
1~67 characters
N/A
None
Password Type
1~19 characters
N/A
None
Bit Field Type
TS1(Time Slot 1), TS2(Time Slot 2), TS3(Time Slot 3), TS4(Time Slot 4), TS5(Time Slot 5), TS6(Time Slot 6), TS7(Time Slot 7), TS8(Time Slot 8), TS9(Time Slot 9), TS10(Time Slot10), TS11(Time Slot11), TS12(Time Slot12), TS13(Time Slot13), TS14(Time Slot14), TS15(Time Slot15), TS16(Time Slot16), TS17(Time Slot17), TS18(Time Slot18), TS19(Time Slot19), TS20(Time Slot20), TS21(Time Slot21), TS22(Time Slot22), TS23(Time Slot23), TS24(Time Slot24), TS25(Time Slot25), TS26(Time Slot26), TS27(Time Slot27), TS28(Time Slot28), TS29(Time Slot29), TS30(Time Slot30), TS31(Time Slot31)
TS1~0, TS2~1, TS3~2, TS4~3, TS5~4, TS6~5, TS7~6, TS8~7, TS9~8, TS10~9, TS11~10, TS12~11, TS13~12, TS14~13, TS15~14, TS16~15, None TS17~16, TS18~17, TS19~18, TS20~19, TS21~20, TS22~21, TS23~22, TS24~23, TS25~24, TS26~25, TS27~26, TS28~27, TS29~28, TS30~29, TS31~30
IP Address Type
Valid IP address
N/A
None
Subnet Mask Type
None
IP Address Type
Valid IP address
N/A
None
Enumeration Type
None
Interval Type
1~512
N/A
byte
Interval Type
3~1500
N/A
byte
Interval Type
1~1000
N/A
ms
Enumeration Type
None
Interval Type
128~1500
N/A
byte
Enumeration Type
None
Enumeration Type
None
Interval Type
1~65535
N/A
ms
Enumeration Type
UP(Up), DOWN(Down) INITIAL(INITIAL), STARTING(STARTI NG), CLOSED(CLOSED) , STOPPED(STOPP ED), CLOSING(CLOSIN G), STOPPING(STOPP ING), REQSENT(REQSE NT), ACKRCVD(ACKRC VD), ACKSENT(ACKSE NT), OPENED(OPENED ) INITIAL(INITIAL), STARTING(STARTI NG), CLOSED(CLOSED) , STOPPED(STOPP ED), CLOSING(CLOSIN G), STOPPING(STOPP ING), REQSENT(REQSE NT), ACKRCVD(ACKRC VD), ACKSENT(ACKSE NT), OPENED(OPENED )
UP~1, DOWN~2
None
Enumeration Type
None
Enumeration Type
None
Enumeration Type
INITIAL(INITIAL), STARTING(STARTI NG), CLOSED(CLOSED) , STOPPED(STOPP ED), CLOSING(CLOSIN G), STOPPING(STOPP ING), REQSENT(REQSE NT), ACKRCVD(ACKRC VD), ACKSENT(ACKSE NT), OPENED(OPENED )
None
Compression & Multiplexing over E1/T1 PPP MUX Compression & Multiplexing over E1/T1 PPP MUX Compression & Multiplexing over E1/T1 PPP MUX Compression & Multiplexing over E1/T1 PPP MUX Compression & Multiplexing over E1/T1 PPP MUX
IP Address Type
Valid IP address
N/A
None
IP Address Type
Valid IP address
N/A
None
IP Address Type
Valid IP address
N/A
None
Enumeration Type
None
Enumeration Type
None
Enumeration Type
None
Interval Type
128~1500
N/A
byte
Compression & Multiplexing over E1/T1 PPP MUX Compression & Multiplexing over E1/T1 PPP MUX Compression & Multiplexing over E1/T1 PPP MUX Compression & Multiplexing over E1/T1 PPP MUX Compression & Multiplexing over E1/T1 PPP MUX Compression & Multiplexing over E1/T1 PPP MUX Compression & Multiplexing over E1/T1 PPP MUX Compression & Multiplexing over E1/T1 PPP MUX Compression & Multiplexing over E1/T1 PPP MUX
Enumeration Type
None
Interval Type
0~4294967295
N/A
packet
Interval Type
0~4294967295
N/A
packet
Interval Type
0~4294967295
N/A
byte/s
Interval Type
0~4294967295
N/A
byte/s
Interval Type
0~4294967295
N/A
None
IP Address Type
Valid IP address
N/A
None
Interval Type
1~1000
N/A
per mill
Interval Type
1~1000
N/A
per mill
Enumeration Type
Compression & Multiplexing over E1/T1 PPP MUX Compression & Multiplexing over E1/T1 PPP MUX Compression & Multiplexing over E1/T1 PPP MUX Compression & Multiplexing over E1/T1 PPP MUX
Interval Type
0~4294967295
N/A
byte
Interval Type
0~4294967295
N/A
packet
Interval Type
0~4294967295
N/A
byte
Interval Type
0~4294967295
N/A
packet
Interval Type
0~63
N/A
None
Interval Type
0~63
N/A
None
Interval Type
0~63
N/A
None
Interval Type
0~63
N/A
None
Interval Type
0~63
N/A
None
Interval Type
0~63
N/A
None
Interval Type
0~63
N/A
None
Interval Type
0~7
N/A
None
Interval Type
0~1
N/A
None
Interval Type
0~7
N/A
None
Enumeration Type
IP(IP)
IP~1
None
Enumeration Type
Enumeration Type
Interval Type
0~15
N/A
None
Enumeration Type
0~0, 1~1, 2~2, 3~3, 4~4, 5~5, 6~6, 7~7, 0, 1, 2, 3, 4, 5, 6, 7, 8~8, 9~9, 10~10, 8, 9, 10, 11, 12, 13, 11~11, 12~12, 14, 15, None 13~13, 14~14, DEFAULTPORT(De 15~15, fault Port) DEFAULTPORT~1 27
Enumeration Type
KBPS(Kbit/s)
KBPS~0
None
Interval Type
32~1000000
N/A
None
Interval Type
32~1000000
N/A
None
Interval Type
64~1000000
N/A
Kbit
Interval Type
64~1000000
N/A
Kbit
Interval Type
0~3
N/A
None
Interval Type
1~100
N/A
None
Interval Type
64~1000000
N/A
None
Interval Type
64~1000000
N/A
None
Interval Type
64~1000000
N/A
None
Interval Type
64~1000000
N/A
None
Interval Type
64~1000000
N/A
Kbit
Interval Type
0~4294967295
N/A
None
Interval Type
0~4294967295
N/A
None
Interval Type
0~4294967295
N/A
None
Interval Type
0~4294967295
N/A
None
Interval Type
0~4294967295
N/A
None
Interval Type
0~4294967295
N/A
None
Interval Type
0~4294967295
N/A
None
Enhanced Transmission QoS Management Enhanced Transmission QoS Management Enhanced Transmission QoS Management
Interval Type
0~4294967295
N/A
None
Enumeration Type
SINGLE_RATE(Sin gle Rate), SINGLE_RATE~0, DUAL_RATE(Dual DUAL_RATE~1 Rate)
None
Interval Type
0~4294967295
N/A
None
Interval Type
0~4294967295
N/A
None
Interval Type
0~4294967295
N/A
None
Interval Type
0~4294967295
N/A
None
Interval Type
0~4294967295
N/A
None
Interval Type
0~4294967295
N/A
None
Interval Type
0~4294967295
N/A
byte/s
Transport Overbooking Transport Differentiated Flow Interval Type Control Transport Resource Overload Control Transport Overbooking Transport Differentiated Flow Interval Type Control Transport Resource Overload Control
0~7
N/A
None
0~1
N/A
None
Transport Overbooking Transport Differentiated Flow Interval Type Control Transport Resource Overload Control
0~7
N/A
None
Transport Overbooking Transport Differentiated Flow Enumeration Type Control Transport Resource Overload Control
0~15
N/A
None
0~0, 1~1, 2~2, 3~3, 4~4, 5~5, 6~6, 7~7, 0, 1, 2, 3, 4, 5, 6, 7, 8~8, 9~9, 10~10, 8, 9, 10, 11, 12, 13, 11~11, 12~12, 14, 15, None 13~13, 14~14, DEFAULTPORT(De 15~15, fault Port) DEFAULTPORT~1 27
OFF(Off), ON(On)
OFF~0, ON~1
None
OFF(Off), ON(On)
OFF~0, ON~1
None
OFF(Off), ON(On)
OFF~0, ON~1
None
0~1000
N/A
per mill
0~10000
N/A
ms
64~1000000
N/A
Kbit/s
64~1000000
N/A
Kbit/s
None
None
0~6
N/A
None
0~500
N/A
ms
0~500
N/A
ms
0~1000000
N/A
Kbit/s
0~1000000
N/A
Kbit/s
0~8192
N/A
packet
None
Interval Type
0~79
N/A
None
None
Interval Type
0~7
N/A
None
None
Interval Type
0~1
N/A
None
None
Interval Type
0~7
N/A
None
None
Interval Type
1~34
N/A
None
None
IP Address Type
Valid IP address
N/A
None
None
IP Address Type
Valid IP address
N/A
None
None
Interval Type
1024~65535
N/A
None
None
IP Address Type
Valid IP address
N/A
None
None
IP Address Type
Valid IP address
N/A
None
None
Interval Type
1024~65535
N/A
None
None
Interval Type
10~59999
N/A
ms
None
Interval Type
11~60000
N/A
ms
None
Interval Type
10~59999
N/A
ms
None
Interval Type
1~99
N/A
None
None
Interval Type
1~99
N/A
None
None
Interval Type
1000~60000
N/A
ms
None
Interval Type
2~254
N/A
None
None
Interval Type
1~253
N/A
None
None
Enumeration Type
None
None
Enumeration Type
None
None
Enumeration Type
None
None
Enumeration Type
None
None
Interval Type
1~254
N/A
None
None
Enumeration Type
SCTP_STAT_DOW N(Down), SCTP_STAT_CON GESTION(Congesti on), SCTP_STAT_UP(U p) SCTP_TRANSFER _CAUSE_START(S tart), SCTP_TRANSFER _CAUSE_LINKDO WN(Link Down), SCTP_TRANSFER _CAUSE_PORTDI SABLED(Port Disabled), SCTP_TRANSFER _CAUSE_INIT(Initia l), SCTP_TRANSFER _CAUSE_UNKNO WERROR(Unknow n Error), SCTP_TRANSFER _CAUSE_NORMAL (Normal), SCTP_TRANSFER _CAUSE_USERDE LETE(User Delete)
SCTP_STAT_DOW N~0, SCTP_STAT_CON None GESTION~1, SCTP_STAT_UP~2
None
Enumeration Type
SCTP_TRANSFER _CAUSE_START~ 0, SCTP_TRANSFER _CAUSE_LINKDO WN~1, SCTP_TRANSFER _CAUSE_PORTDI SABLED~2, SCTP_TRANSFER None _CAUSE_INIT~3, SCTP_TRANSFER _CAUSE_UNKNO WERROR~4, SCTP_TRANSFER _CAUSE_NORMAL ~5, SCTP_TRANSFER _CAUSE_USERDE LETE~6
None
Compound Type
None
N/A
None
None
Interval Type
0~34
N/A
None
None
Interval Type
0~34
N/A
None
None
Enumeration Type
ACTIVE(Active Path), ACTIVE~0, STANDBY(Standby STANDBY~1 Path) UNBLOCK(Unblock UNBLOCK~0, ), BLOCK(Block) BLOCK~1
None
None
Enumeration Type
None
None
Interval Type
10~500
N/A
ms
None
0~47 characters
N/A
None
Interval Type
0~79
N/A
None
Interval Type
1~34
N/A
None
IP Address Type
Valid IP address
N/A
None
IP Address Type
Valid IP address
N/A
None
Interval Type
1024~65535
N/A
None
IP Address Type
Valid IP address
N/A
None
IP Address Type
Valid IP address
N/A
None
Interval Type
1024~65535
N/A
None
Interval Type
1000~60000
N/A
ms
Interval Type
1000~60000
N/A
ms
Interval Type
1000~60000
N/A
ms
Interval Type
1~99
N/A
None
Interval Type
1~99
N/A
None
Interval Type
1000~60000
N/A
ms
Interval Type
2~254
N/A
None
Interval Type
1~253
N/A
None
Enumeration Type
None
Enumeration Type
None
Interval Type
1~254
N/A
None
Enumeration Type
SCTP_STAT_DOW N(Down), SCTP_STAT_CON GESTION(Congesti on), SCTP_STAT_UP(U p) SCTP_TRANSFER _CAUSE_START(S tart), SCTP_TRANSFER _CAUSE_LINKDO WN(Link Down), SCTP_TRANSFER _CAUSE_PORTDI SABLED(Port Disabled), SCTP_TRANSFER _CAUSE_INIT(Initia l), SCTP_TRANSFER _CAUSE_UNKNO WERROR(Unknow n Error), SCTP_TRANSFER _CAUSE_NORMAL (Normal), SCTP_TRANSFER _CAUSE_USERDE LETE(User Delete)
SCTP_STAT_DOW N~0, SCTP_STAT_CON None GESTION~1, SCTP_STAT_UP~2
Enumeration Type
SCTP_TRANSFER _CAUSE_START~ 0, SCTP_TRANSFER _CAUSE_LINKDO WN~1, SCTP_TRANSFER _CAUSE_PORTDI SABLED~2, SCTP_TRANSFER None _CAUSE_INIT~3, SCTP_TRANSFER _CAUSE_UNKNO WERROR~4, SCTP_TRANSFER _CAUSE_NORMAL ~5, SCTP_TRANSFER _CAUSE_USERDE LETE~6
Compound Type
None
N/A
None
IPv4/IPv6 Dual Stack S1 and X2 over IPv6 IPv4/IPv6 Dual Stack S1 and X2 over IPv6 IPv4/IPv6 Dual Stack S1 and X2 over IPv6 IPv4/IPv6 Dual Stack S1 and X2 over IPv6 IPv4/IPv6 Dual Stack S1 and X2 over IPv6
Interval Type
0~34
N/A
None
Interval Type
0~34
N/A
None
Enumeration Type
ACTIVE(Active Path), ACTIVE~0, STANDBY(Standby STANDBY~1 Path) UNBLOCK(Unblock UNBLOCK~0, ), BLOCK(Block) BLOCK~1
None
Enumeration Type
None
0~47 characters
N/A
None
IP Address Type
Valid IP address
N/A
None
Subnet Mask Type
None
Interval Type
1~4094
N/A
None
Enumeration Type
OFF(Off), ON(On)
OFF~0, ON~1
None
Enumeration Type
OFF(Off), ON(On)
OFF~0, ON~1
None
Transport Overbooking Transport Resource Overload Control Different Transport Interval Type Paths based on QoS Grade Intra-LTE Load Balancing
0~100
N/A
0~100
N/A
0~100
N/A
0~100
N/A
0~100
N/A
0~100
N/A
0~100
N/A
0~100
N/A
0~100
N/A
Interval Type
0~100
N/A
Interval Type
0~100
N/A
Interval Type
0~100
N/A
Interval Type
0~100
N/A
Interval Type
0~100
N/A
Interval Type
0~100
N/A
Interval Type
0~100
N/A
Interval Type
0~100
N/A
Interval Type
0~100
N/A
Interval Type
0~100
N/A
Enumeration Type
OFF(Off), ON(On)
OFF~0, ON~1
None
Enumeration Type
OFF(Off), ON(On)
OFF~0, ON~1
None
Enumeration Type
OFF(Off), ON(On)
OFF~0, ON~1
None
Enumeration Type
OFF(Off), ON(On)
OFF~0, ON~1
None
Enumeration Type
OFF(Off), ON(On)
OFF~0, ON~1
None
Enumeration Type
OFF(Off), ON(On)
OFF~0, ON~1
None
Interval Type
0~100
N/A
Interval Type
0~100
N/A
Interval Type
0~100
N/A
Interval Type
0~100
N/A
Interval Type
0~100
N/A
Interval Type
0~100
N/A
Interval Type
0~100
N/A
Interval Type
0~100
N/A
None
Enumeration Type
None
Transport Resource Enumeration Type Overload Control
OFF(Off), ON(On)
OFF~0, ON~1
None
Transport Resource Enumeration Type Overload Control
OFF(Off), ON(On)
OFF~0, ON~1
None
Transport Resource Interval Type Overload Control
0~100
N/A
0~100
N/A
0~100
N/A
None
0~100
N/A
0~100
N/A
None
Enumeration Type
WHITELIST(Whiteli st), WHITELIST~1, BLACKLIST(Blackli BLACKLIST~2 st)
None
None
Interval Type
0~4294967295
N/A
None
None
Interval Type
0~4294967295
N/A
None
None
Interval Type
0~4294967295
N/A
None
None
Interval Type
0~4294967295
N/A
None
None
Interval Type
0~4294967295
N/A
None
None
Interval Type
0~4294967295
N/A
None
None
Interval Type
0~4294967295
N/A
None
None
Interval Type
0~4294967295
N/A
None
None
Interval Type
0~4294967295
N/A
None
None
Interval Type
0~4294967295
N/A
None
None
Interval Type
0~4294967295
N/A
None
None
Interval Type
0~4294967295
N/A
None
None
Interval Type
0~4294967295
N/A
None
None
Interval Type
0~4294967295
N/A
None
None
Interval Type
0~4294967295
N/A
None
None
Interval Type
0~4294967295
N/A
None
None
Interval Type
0~4294967295
N/A
None
None
Interval Type
0~4294967295
N/A
None
None
Interval Type
0~4294967295
N/A
None
None
Interval Type
0~4294967295
N/A
None
None
Interval Type
0~4294967295
N/A
None
None
Interval Type
0~4294967295
N/A
None
None
Interval Type
0~4294967295
N/A
None
None
Interval Type
0~4294967295
N/A
None
None
Interval Type
0~4294967295
N/A
None
None
Interval Type
0~4294967295
N/A
None
None
Interval Type
0~4294967295
N/A
None
None
Interval Type
0~4294967295
N/A
None
IP-Based Multimode CoTransmission on BS Interval Type side(eNodeB) 2G/3G and LTE Cotransmission IP-Based Multimode CoTransmission on BS Interval Type side(eNodeB) 2G/3G and LTE Cotransmission IP-Based Multimode CoTransmission on BS Interval Type side(eNodeB) 2G/3G and LTE Cotransmission
0~7
N/A
None
0~1
N/A
None
0~7
N/A
None
IP-Based Multimode CoTransmission on BS Interval Type side(eNodeB) 2G/3G and LTE Cotransmission IP-Based Multimode CoTransmission on BS Interval Type side(eNodeB) 2G/3G and LTE Cotransmission IP-Based Multimode CoTransmission on BS Interval Type side(eNodeB) 2G/3G and LTE Cotransmission IP-Based Multimode CoTransmission on BS Interval Type side(eNodeB) 2G/3G and LTE Cotransmission IP-Based Multimode CoTransmission on BS Interval Type side(eNodeB) 2G/3G and LTE Cotransmission IP-Based Multimode CoTransmission on BS Interval Type side(eNodeB) 2G/3G and LTE Cotransmission IP-Based Multimode CoTransmission on BS Interval Type side(eNodeB) 2G/3G and LTE Cotransmission IP-Based Multimode CoTransmission on BS Interval Type side(eNodeB) 2G/3G and LTE Cotransmission
0~14
N/A
None
0~7
N/A
None
0~1
N/A
None
0~7
N/A
None
0~4294967295
N/A
byte
0~4294967295
N/A
packet
0~4294967295
N/A
byte
0~4294967295
N/A
packet
Interval Type
0~3
N/A
None
Enumeration Type
USERDATA(User Data), SIG(Signaling Data), OTHER(Other Data), OM_HIGH(High Level Maintenance Data), OM_LOW(Low Level Maintenance Data)
USERDATA~0, SIG~1, OTHER~3, OM_HIGH~4, OM_LOW~5
None
Interval Type
0~63
N/A
None
Interval Type
1~4094
N/A
None
Interval Type
0~7
N/A
None
IP Address Type
Valid IP address
N/A
None
Subnet Mask Type
None
Enumeration Type
SINGLEVLAN(Singl e VLAN), SINGLEVLAN~0, VLANGROUP(VLA VLANGROUP~1 N Group)
None
Interval Type
1~4094
N/A
None
Interval Type
0~7
N/A
None
Interval Type
0~3
N/A
None
Enumeration Type
None
None
Interval Type
5000~60000
N/A
ms
None
Interval Type
3~6
N/A
None
None
Interval Type
0~63
N/A
None
None
Enumeration Type
None
Actual Value Range
Default Value
Recommended Value
Initial Value Setting Source
Impact
0~35
None
None
Equipment Planning BFANT
00
60~254
None
None
00
None
0~128 characters
NULL
None
0~15
None
30,65,90,360
30
None
Default/Recommen BFANT ded Value
33~64
33
None
Default/Recommen BFANT ded Value
INTELLIGENT, DISTRIBUTED
INTELLIGENT
None
N/A
BFANT
SINGLE, DUAL
None
None
N/A
BFANT
0~360
None
None
N/A
BFANT
FOURPORTS, EIGHTPORTS
FOURPORTS(Four None Ports)
N/A
BFANT
0~1, step:0.01
None
None
N/A
BFANT
-180~180
None
None
N/A
BFANT
0~1, step:0.01
None
None
N/A
BFANT
-180~180
None
None
N/A
BFANT
0~1, step:0.01
None
None
N/A
BFANT
-180~180
None
None
N/A
BFANT
0~1, step:0.01
None
None
N/A
BFANT
-180~180
None
None
N/A
BFANT
0~1, step:0.01
None
None
N/A
BFANT
-180~180
None
None
N/A
BFANT
0~1, step:0.01
None
None
N/A
BFANT
-180~180
None
None
N/A
BFANT
0~1048575
None
Radio Planning (Internal planning)
eNodeB
1~64 characters
DBS3900 LTE
None
eNodeB
DBS3900_LTE, BTS3900_LTE, BTS3900A_LTE, BTS3900L_LTE, BTS3900AL_LTE
DBS3900_LTE(DB None S3900 LTE)
Equipment Planning eNodeB
ON, OFF
OFF(OFF)
None
Engineering Design eNodeB
22:00:00~5:00:00
00:00:00
None
23:00:00~6:00:00
06:00:00
None
-180~180, step:1e-6 0
None
eNodeB
-90~90, step:1e-6
None
eNodeB
0~20 characters
None
None
N/A
eNodeB
Default, Normal, Demo, Protected, Emergency
None
None
N/A
eNodeB
Poweroff, Normal
None
None
N/A
eNodeB
0~128 characters
NULL
None
eNodeB
DEG, SEC
DEG
None
0~16 characters
0:0:0
None
eNodeB
0~16 characters
0:0:0
None
eNodeB
CPRI, TDL_IR
CPRI
None
Transmission_Pack et_Loss_Rate, Transmission_Dela y, Transmission_Jitter, Packet_Loss_Rate, Cell_RRC_Connect _Succ_Rate, Cell_ERAB_Setup_ Succ_Rate, Cell_Call_Drop_Rat None e, IntraFrequency_HO_Su cc_Rate, InterFrequency_HO_Su cc_Rate, LTECDMA_Handover_ Succ_Rate, LTEWCDMA_Handover _Succ_Rate, LTEGERAN_Handover _Succ_Rate
None
Equipment Planning KPIALARM
ON, OFF
None
OFF
Default/Recommen KPIALARM ded Value
0~4294967295
None
If the KPITYPE parameter is set to Transmission_Pack et_Loss_Rate or Cell_Call_Drop_Rat e, the recommended threshold is 10. If the KPITYPE parameter is set to Transmission_Dela y, the recommended threshold is 300. If the KPITYPE parameter is set to Transmission_Jitter, Default/Recommen KPIALARM the recommended ded Value threshold is 100. If the KPITYPE parameter is set to Packet_Loss_Rate, the recommended threshold is 5. If the KPITYPE parameter is set to Cell_RRC_Connect _Succ_Rate or Cell_ERAB_Setup_ Succ_Rate, the recommended threshold is 90. If the KPITYPE parameter is set to
0~4294967295
None
If the KPITYPE parameter is set to Transmission_Pack et_Loss_Rate or Cell_Call_Drop_Rat e, the recommended threshold is 5. If the KPITYPE parameter is set to Transmission_Dela y, the recommended threshold is 200. If the KPITYPE parameter is set to Transmission_Jitter, Default/Recommen KPIALARM the recommended ded Value threshold is 50. If the KPITYPE parameter is set to Packet_Loss_Rate, the recommended threshold is 1. If the KPITYPE parameter is set to Cell_RRC_Connect _Succ_Rate or Cell_ERAB_Setup_ Succ_Rate, the recommended threshold is 95. If the KPITYPE parameter is set to
0~4294967295
100
If the KPITYPE parameter is set to Transmission_Pack et_Loss_Rate, Transmission_Dela y, Transmission_Jitter, or Packet_Loss_Rate, the recommended value of this parameter is 360. If the KPITYPE parameter is set to Cell_RRC_Connect _Succ_Rate, Default/Recommen Cell_ERAB_Setup_ KPIALARM ded Value Succ_Rate, Cell_Call_Drop_Rat e, IntraFrequency_HO_Su cc_Rate, InterFrequency_HO_Su cc_Rate, LTECDMA_Handover_ Succ_Rate, LTEWCDMA_Handover _Succ_Rate, or LTEGERAN_Handover _Succ_Rate, the recommended value of this parameter is 100.
15minutes, 30minutes, 60minutes, 1day
60minutes(60minut 60minutes es)
0~23
None
1~3
0~17
None
None
Equipment Planning Sector
-180~180, step:1e-6 None
None
Sector
-90~90, step:1e-6
None
None
Sector
1T1R, 1T2R, 2T2R, None 2T4R, 4T4R, 8T8R
None
Sector
NormalMIMO, AIDMIMO
NormalMIMO(Norm None al MIMO)
Sector
COMBTYPE_SING LE_RRU, COMBTYPE_TWO _RRU, COMBTYPE_THRE E_RRU, COMBTYPE_FOUR _RRU, COMBTYPE_SING None COMBTYPE_FIVE_ LE_RRU RRU, COMBTYPE_SIX_ RRU, COMBTYPE_SEVE N_RRU, COMBTYPE_EIGH T_RRU
Sector
0~62
None
None
4~5,60~254
None
None
0~8
None
None
None
None
0~62
None
4~5,60~254
60
None
0~8
None
R0A
None
0~62
None
4~5,60~254
60
None
0~8
None
R0A
None
0~62
None
4~5,60~254
60
None
0~8
None
R0A
None
0~62
None
4~5,60~254
60
None
0~8
None
R0A
None
0~62
None
4~5,60~254
60
None
0~8
None
R0A
None
0~62
None
4~5,60~254
60
None
0~8
None
R0A
None
0~62
None
4~5,60~254
60
None
0~8
None
R0A
None
0~62
None
N/A
Sector
4~5,60~254
60
None
0~8
None
R0A
None
0~62
None
4~5,60~254
60
None
0~8
None
R0A
None
0~62
None
4~5,60~254
60
None
0~8
None
R0A
None
0~62
None
4~5,60~254
60
None
0~8
None
R0A
None
0~30 characters
NULL
None
-32767~32767
None
None
Sector
0~1800000
None
Sector
0~1800000
None
Sector
0~179
None
Sector
0~990
None
Sector
0~100
None
Sector
DEG, SEC
DEG
None
Sector
0~16 characters
0:0:0
None
Sector
0~16 characters
0:0:0
None
Sector
FALSE, TRUE
FALSE
None
Sector
0~62
None
4~5,60~254
60
None
0~8
None
R0A
None
0~62
None
4~5,60~254
60
None
0~8
None
R0A
None
0~62
None
4~5,60~254
60
None
0~8
None
R0A
None
0~62
None
4~5,60~254
60
None
0~8
None
R0A
None
0~50, step:0.1
None
None
N/A
Sector
Normal, NoLicense None
None
N/A
Sector
0~40 characters
None
None
N/A
Sector
0~40 characters
None
None
N/A
Sector
COMPATIBLE, HTTPS_ONLY, LOGIN_HTTPS_O NLY
HTTPS_ONLY
None
Equipment Planning
WEBLOGINPOLIC Y
0~35
None
None
Equipment Planning ALD
0~2 characters
None
None
N/A
ALD
0~36 characters
None
None
N/A
ALD
0~49 characters
NULL
None
0~62
None
4~5,60~254
None
None
0~8
None
None
AISG1.1, AISG2.0, None 3GPP, UNKNOWN
None
N/A
ALD
0~8
None
None
N/A
ALD
0~2 characters
NULL
None
0~36 characters
NULL
None
0~19 characters
None
None
N/A
ALD
0~127 characters
None
None
N/A
ALD
0~19 characters
None
None
N/A
ALD
SINGLE_RET, None STMA, MULTI_RET
None
N/A
ALD
R0A, R0B, RET_PORT, R0C, R0D, R0E, R0F, R0G, R0H, NULL
None
None
N/A
ALD
0~62
None
Equipment Planning AntennaPort
4~5,60~254
None
None
0~8
None
None
R0A, R0B, R0C, R0D, R0E, R0F, R0G, R0H
None
None
0~1000
None
0~50
None
0~50
None
ON, OFF
OFF(OFF)
None
Engineering Design AntennaPort
UER_SELF_DEFIN E, TMA12DB_ONLY_ NON_AISG, UER_SELF_DEFIN TMA24DB_ONLY_ E(UER_SELF_DEF None NON_AISG, INE) RET_ONLY_COAXI AL, TMA12DB_AISG, TMA24DB_AISG
0~3500
40
None
0~3500
60
None
0~3500
185
None
0~3500
155
None
0~3500
None
None
N/A
AntennaPort
ON, OFF, NULL
None
None
N/A
AntennaPort
SINGLE_RET, MULTI_RET
None
None
Equipment Planning RET
SINGLE, DUAL
None
None
REGULAR, DAISY_CHAIN
None
None
1~8
None
RET, VRET
None
None
N/A
RET
0~35
None
None
0~2 characters
None
None
N/A
RET
0~36 characters
None
None
N/A
RET
0~49 characters
NULL
None
0~62
None
4~5,60~254
None
None
0~8
None
None
None
N/A
RET
0~8
None
None
N/A
RET
0~2 characters
NULL
None
0~36 characters
NULL
None
0~19 characters
None
None
N/A
RET
0~127 characters
None
None
N/A
RET
0~19 characters
None
None
N/A
RET
None
N/A
RET
None
None
N/A
RET
0~35
None
None
Equipment Planning RetDeviceData
1~8
None
None
0~359
None
RetDeviceData
0~15 characters
NULL
None
0~32 characters
NULL
None
0~359
None
Default/Recommen RetDeviceData ded Value
0~359
None
0~359
None
0~359
None
0~25.5, step:0.1
None
0~25.5, step:0.1
None
0~25.5, step:0.1
None
0~25.5, step:0.1
None
0~6 characters
NULL
None
-10~30, step:0.1
None
RetDeviceData
0~5 characters
NULL
None
UNUSED, BandI, BandII, BandIII, BandIV, BandV, BandVI, BandVII, BandVIII, BandIX, BandX
UNUSED(UNUSED None )
0~32 characters
NULL
None
0~17 characters
NULL
None
-180~180, step:0.1
None
None
N/A
RetDeviceData
-180~180, step:0.1
None
None
N/A
RetDeviceData
UNUSED, BandI, BandII, BandIII, BandIV, BandV, BandVI, BandVII, BandVIII, BandIX, BandX, NULL
None
None
N/A
RetDeviceData
None
None
N/A
RetDeviceData
None
None
N/A
RetDeviceData
None
None
N/A
RetDeviceData
0~359
None
None
N/A
RetDeviceData
0~359
None
None
N/A
RetDeviceData
0~359
None
None
N/A
RetDeviceData
0~359
None
None
N/A
RetDeviceData
0~25.5, step:0.1 0~25.5, step:0.1 0~25.5, step:0.1 0~25.5, step:0.1
None None None None
None None None None
N/A N/A N/A N/A
RetDeviceData RetDeviceData RetDeviceData RetDeviceData
0 None
None
Equipment Planning RetPort
60~254
None
None
0 None
None
RET_PORT
None
None
ON, OFF
OFF(OFF)
None
UER_SELF_DEFIN UER_SELF_DEFIN E, E(UER_SELF_DEF None RET_ONLY_MULTI INE) CORE
Default/Recommen RetPort ded Value
0~3500
40
None
0~3500
60
None
0~3500
185
None
0~3500
155
None
0~3500
None
None
N/A
RetPort
ON, OFF, NULL
None
None
N/A
RetPort
0~35
None
None
Equipment Planning RETSubunit
1~8
None
None
AVAILABLE, UNAVAILABLE, BREAKLINK
None
None
N/A
RETSubunit
-10~30, step:0.1
None
None
N/A
RETSubunit
0~17
None
None
N/A
RETSubunit
0~62,255
255
None
4~5,60~255
255
None
0~8,255
255
None
R0A(R0A)
None
0~62,255
255
None
4~5,60~255
255
None
0~8,255
255
None
R0B(R0B)
None
-10~30, step:0.1
None
RETSubunit
0~1, step:0.1
None
Default/Recommen RETSubunit ded Value
0~49 characters
NULL
None
Engineering Design RETSubunit
1~2
None
None
Equipment Planning TMA
0~35
None
None
0~2 characters
None
None
N/A
TMA
0~36 characters
None
None
N/A
TMA
0~49 characters
NULL
None
0~62
None
4~5,60~254
None
None
0~8
None
None
None
N/A
TMA
0~8
None
None
N/A
TMA
0~2 characters
NULL
None
0~36 characters
NULL
None
0~19 characters
None
None
N/A
TMA
0~127 characters
None
None
N/A
TMA
0~19 characters
None
None
N/A
TMA
None
N/A
TMA
None
None
N/A
TMA
0~35
None
None
Equipment Planning TMADeviceData
1~2
None
None
0~359
None
Default/Recommen TMADeviceData ded Value
0~32 characters
NULL
None
0~359
None
0~359
None
0~359
None
0~359
None
0~25.5, step:0.1
None
0~25.5, step:0.1
None
0~25.5, step:0.1
None
0~25.5, step:0.1
None
0~6 characters
NULL
None
-10~30, step:0.1
None
0~5 characters
NULL
None
0~32 characters
NULL
None
0~17 characters
NULL
None
0~15 characters
NULL
None
0~1073741823.75, step:0.25
None
None
N/A
TMADeviceData
0~1073741823.75, step:0.25
None
None
N/A
TMADeviceData
UNSUPPORT, SUPPORT_BYPAS S, None SUPPORT_VSWR, VSWR/BYPASS, NULL
None
N/A
TMADeviceData
0~63.75, step:0.25
None
None
N/A
TMADeviceData
None
None
N/A
TMADeviceData
None
None
N/A
TMADeviceData
None
None
N/A
TMADeviceData
None
None
N/A
TMADeviceData
0~359
None
None
N/A
TMADeviceData
0~359
None
None
N/A
TMADeviceData
0~359
None
None
N/A
TMADeviceData
0~359
None
None
N/A
TMADeviceData
0~25.5, step:0.1 0~25.5, step:0.1
None None
None None
N/A N/A
0~25.5, step:0.1 0~25.5, step:0.1
None None
None None
N/A N/A
0~65535
None
N/A
TMADeviceData
0~65535
None
N/A
TMADeviceData
0~65535
None
N/A
TMADeviceData
0~65535
None
N/A
TMADeviceData
0~35
None
None
Equipment Planning TMASubunit
1~2
None
None
0~17 0~1073741823.75, step:0.25 NORMAL, BYPASS, NULL
None
None
N/A
TMASubunit
None
None
N/A
TMASubunit
None
None
N/A
TMASubunit
AVAILABLE, UNAVAILABLE, BREAKLINK
None
None
N/A
TMASubunit
R0A(R0A)
None
0~62,255
255
None
0~8,255
255
None
4~5,60~255
255
None
0~63.75, step:0.25
255
None
TMASubunit
NORMAL, BYPASS
NORMAL(NORMAL None )
Default/Recommen TMASubunit ded Value
0~62
None
None
Equipment Planning VAntennaPort
60~254
None
None
0 None
None
R0A, R0B, R1A, R1B, R2A, R2B, R3A, R3B, R4A, R4B, R5A, R5B, R6A, R6B, R7A, R7B, NULL
None
None
60~254
None
None
Equipment Planning VRET
0~62
None
None
60~254
None
None
0 None
None
0~64 characters
None
None
88
None
0~62
None
None
Equipment Planning VRETSubunit
NULL(NULL)
None
Engineering Design VRETSubunit
NULL(NULL)
None
0~64 characters
None
None
60~254
None
None
NEGATIVE_45, POSITIVE_45, HORIZONTAL, POSITIVE_NEGATI VERTICAL, LEFT, None VE_45 RIGHT, POSITIVE_NEGATI VE_45
0 None
None
60~254
None
None
1~8
None
None
NULL(NULL)
None
NEGATIVE_45, POSITIVE_45, HORIZONTAL, POSITIVE_NEGATI VERTICAL, LEFT, None VE_45 RIGHT, POSITIVE_NEGATI VE_45
-15~15,3276.7, step:0.1
32767
None
-15~15,3276.7, step:0.1
32767
None
NULL(NULL)
None
NEGATIVE_45, POSITIVE_45, HORIZONTAL, POSITIVE_NEGATI VERTICAL, LEFT, None VE_45 RIGHT, POSITIVE_NEGATI VE_45 NEGATIVE_45, POSITIVE_45, HORIZONTAL, POSITIVE_NEGATI VERTICAL, LEFT, None VE_45 RIGHT, POSITIVE_NEGATI VE_45
0,1,2,4
None
0~255
None
None
Equipment Planning CTRLLNK
0~7
None
None
0~1
None
None
0~7
None
None
0~7
None
None
0~1
None
None
0~7
None
None
0~4
None
None
0~4,8
None
None
N/A
CTRLLNK
2000-01-01 00:00:00~2038-12- None 31 23:59:59
None
N/A
CTRLLNK
0~4294967295
None
None
N/A
CTRLLNK
0~65535
None
None
N/A
CTRLLNK
0~65535
None
None
N/A
CTRLLNK
0~4294967295
None
None
N/A
CTRLLNK
0~4294967295
None
None
N/A
CTRLLNK
0~65535
None
None
N/A
CTRLLNK
0~65535
None
None
N/A
CTRLLNK
0~4294967295
None
None
N/A
CTRLLNK
0~4294967295
None
None
N/A
CTRLLNK
0~65535
None
None
N/A
CTRLLNK
0~65535
None
None
N/A
CTRLLNK
0~4294967295
None
None
N/A
CTRLLNK
0~4294967295
None
None
N/A
CTRLLNK
0~4294967295
None
None
N/A
CTRLLNK
0~4294967295
None
None
N/A
CTRLLNK
0~31 characters
None
None
N/A
CTRLLNK
00
Default/Recommen BITS ded Value
0~7
0~1
0~7
DEACTIVATED, ACTIVATED
None
None
N/A
BITS
UNAVAILABLE, AVAILABLE
None
None
N/A
BITS
1~4
00
Default/Recommen LineClk ded Value
0~7
0~1
0~5
0~7
Equipment Planning LineClk
None
None
N/A
LineClk
None
None
N/A
LineClk
1~4
00
Default/Recommen PeerClk ded Value
UMTS, GSM, DEFAULT
DEFAULT(DEFAUL None T)
Default/Recommen PeerClk ded Value
None
None
N/A
PeerClk
None
None
N/A
PeerClk
0~1
Equipment Planning TOD
IN, OUT
IN(Input)
IN(Input)
Default/Recommen TOD ded Value
0~7
0~1
0~7
None
TWISTED-PAIR, COAXIAL
TWISTEDNone PAIR(Twisted-Pair)
0~1000
None
None
None
N/A
TOD
None
None
N/A
TOD
0~100000
None
N/A
TOD
1~4
0~17
Equipment Planning GPS
0~7
Default/Recommen GPS ded Value
0~1,60~254
0~7
None
USER_CONFIG, SEARCH_WITH_D URATION, AUTO_SEARCH(A None SEARCH_WITH_P uto Search) RECISION, AUTO_SEARCH
-180~180, step:1e-6 0
None
-90~90, step:1e-6
None
-1000~10000
None
0~89
None
0~100000
None
N/A
GPS
1~2880
None
1~100
None
TWISTED-PAIR, COAXIAL
COAXIAL(Coaxial)
None
0~1000
None
1~63 characters
None
None
N/A
GPS
Lock, Unlock
None
None
N/A
GPS
Valid, Invalid
None
None
N/A
GPS
Valid, Invalid
None
None
N/A
GPS
NotFixed, Fixed
None
None
N/A
GPS
Enabled, Disabled
None
None
N/A
GPS
Valid, Invalid
None
None
N/A
GPS
0~100
None
None
N/A
GPS
NOTEXIST, ANTENNASHORTE D, ANTENNAOPENE D, SELF_CHECK_FAI LURE, None COMEXCEPTION, NORMAL, UNKNOWN, USCUINVALID, UNKNOWN_STAR _CARD
None
N/A
GPS
M12M, UT, RT, JPS15L, K161, GG16, JNS100, RGPS, CWAIN, RTSMT, UBLOX5, None BD7702, NAVIOR, PPSTOD, M1000, TRGPS, BD7702CMS, OEM4, UNKNOWN
None
N/A
GPS
0~100
None
None
N/A
GPS
GPS, GLONASS, GPS/GLONASS, COMPASS, COMPASS/GPS, GPS/COMPASS
GPS(GPS)
GPS(GPS)
0~100
None
None
N/A
GPS
None
None
N/A
GPS
1~4
0~1
Equipment Planning IPCLKLNK
HW_DEFINED, PTP
PTP(PTP Protocol) PTP(PTP)
0~7
0~1
0~7
None
Valid IP address
0.0.0.0
None
Valid IP address
0.0.0.0
None
0~127
E2E, P2P
E2E(E2E)
E2E(E2E)
Default/Recommen IPCLKLNK ded Value
OFF, ON
ON(ON)
ON
0~255
0~255
13
13
0~255
0~255
14
14
0~4294967295
None
None
N/A
IPCLKLNK
NO, YES
NO(NO)
NO(NO)
14 characters
0000-0000-0000
None
None
None
N/A
IPCLKLNK
None
None
N/A
IPCLKLNK
UNICAST, L2_MULTICAST
UNICAST(Unicast) UNICAST(Unicast)
-100000~100000
ONE_STEP, TWO_STEP
None
None
N/A
IPCLKLNK
0~4094
None
None
N/A
IPCLKLNK
2147483648~21474 None 83647
None
N/A
IPCLKLNK
1~4
1/16, 1/8, 1/4, 1/2, 1.0, 2.0, 4.0, 8.0
1/2(1/2)
None
1/2, 1.0, 2.0, 4.0, 8.0, 16.0, 32.0, 64.0, 128.0
16.0(16.0)
None
0~255
255
None
1588V2, G.8265.1
1588V2(1588V2)
None
60~1000
300
None
IPV4, IPV6
IPV4(IPv4)
None
Valid IP address
0:0:0:0:0:0:0:0
None
Transport Planning(Internal planning)
IPCLKLNK
Valid IP address
0:0:0:0:0:0:0:0
None
IPCLKLNK
00
Default/Recommen SyncEth ded Value
0~7
0~1
0~7
None
0~5
Equipment Planning SyncEth
DISABLE, ENABLE
DISABLE(DISABLE None )
Equipment Planning SyncEth
None
None
N/A
SyncEth
None
None
N/A
SyncEth
1~4
AVAILABLE, UNAVAILABLE, UNSUPPORT, PARTAVAILABLE
None
None
N/A
Tasm
FORBID, ALLOW, NA
None
None
N/A
Tasm
1~4
None
None
N/A
Tasm
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 0(0) 14, 15, 16, 17, AUTO
None
Equipment Planning Tasm
GPS, BITS, IPCLK, SYNCETH, LINECLK, TOD, GPS(GPS Clock) PEERCLK, SYNCETH+IPCLK, GPS+SYNCETH
GPS(GPS Clock)
Equipment Planning Tasm
AUTO, MANUAL, FREE
AUTO(Auto)
AUTO(Auto)
Default/Recommen Tasm ded Value
FREQ, TIME
FREQ(FREQ)
None
NORMAL, LOST, UNAVAILABLE, FREDVAT, JITTER, None PHASEOUTSCOP E, UNKNOWN, DIFFSRC
None
N/A
Tasm
FREERUNNING, FASTTRACKING, LOCKED, HOLDOVER, UNKNOWN
None
None
N/A
Tasm
GPS, BITS, IPCLK, SYNCETH, LINECLK, TOD, None PEERCLK, SYNCETH+IPCLK, GPS+SYNCETH
None
N/A
Tasm
0~7
None
N/A
Tasm
0~1
None
N/A
Tasm
0~7
None
None
N/A
Tasm
QL-PRC, QL-SSUA, QL-SSU-B, QL- QL-SSU-B(QL-SSUNone EEC2, QL-EEC1, B) QL-DNU
0~7
None
Equipment Planning BBP
0~1
None
0~5
None
None
LBBP
LBBP(LBBP)
LBBP(LBBP)
FDD, TDD, TDD_ENHANCE, TDD_8T8R, TDD_TL
FDD(Frequency Division Duplex)
FDD(Frequency Division Duplex)
BBP
LOCKED, UNLOCKED
UNLOCKED(Unlock UNLOCKED(Unlock Engineering Design BBP ed) ed)
0~4294967295
Engineering Design BBP
IMMEDIATE, DELAY
IMMEDIATE(Immed IMMEDIATE(Immed Engineering Design BBP iate) iate)
Alarm_0, Alarm_1, Alarm_2, Alarm_3, Alarm_4, Alarm_5, Alarm_6, Alarm_7, Alarm_8, Alarm_9, Alarm_10, Alarm_11, Alarm_12, Alarm_13, Alarm_14, Alarm_15
None
None
N/A
BBP
Enabled, Disabled
None
None
N/A
BBP
Avail_0, Avail_1, Avail_20, Avail_21, Avail_500, Avail_501, Avail_504, Avail_508, Avail_509, Avail_520, Avail_521, Avail_524, Avail_528, Avail_529, Avail_800, Avail_801, Avail_820, Avail_821, Avail_c10, None Avail_c11, Avail_c12, Avail_c13, Avail_c14, Avail_c30, Avail_c31, Avail_c32, Avail_c33, Avail_c34, Avail_d00, Avail_d01, Avail_d04, Avail_d08, Avail_d09, Avail_d20, Avail_d21, Avail_d24,
None
N/A
BBP
0~2047 characters
None
None
N/A
BBP
None None
None None
N/A N/A
BBP BBP
0~259 characters
None
None
N/A
BBP
0~11 characters
None
None
N/A
BBP
0~23 characters
None
None
N/A
BBP
0~19 characters
None
None
N/A
BBP
UMPT, FAN, UPEU, PMU, PSU, BAT, TCU, EMU, UTRP, USCU, UEIU, FMU, MRRU, MRFU, RHUB, UBRI, MRXU, MTXU, UCIU, CCU, MAAU, None UNKNOWN, PRRU, GRRU, GRFU, GATM, DRRU, DRFU, WRFU, NGRU, LMPT, LBBP, LRRU, LRFU, BRFU, CRFU, RRU
None
N/A
BBP
0~4294967295 0~4294967295
None None
None None
N/A N/A
BBP BBP
CPU, DSP, SLAVE_CPU, MDU_CPU, MRU_CPU
None
None
N/A
BBP
2147483648~21474 None 83647 2147483648~21474 None 83647 0~255 characters None
None
N/A
BBP
None None
N/A N/A
BBP BBP
Master, NDD, NCD, NDC, NEC, EUL, None EDL, Slave
None
N/A
BBP
CABINET, SUBRACK, BOARD, SUBBOARD, SFP
None
None
N/A
BBP
None None
None None
N/A N/A
BBP BBP
0~63 characters
None
None
N/A
BBP
0~63 characters 1~39 characters Normal, Fault, Timeout, NULL
None None
None None
N/A N/A
BBP BBP
None
None
N/A
BBP
0~65535
None
None
N/A
BBP
0~65535
None
None
N/A
BBP
0~7
None
Equipment Planning BbuFan
0~1
None
16 None
None
2147483648~21474 None 83647
None
N/A
BbuFan
0~100
None
None
N/A
BbuFan
None
None
N/A
BbuFan
Enabled, Disabled
None
None
N/A
BbuFan
None
N/A
BbuFan
0~2047 characters
None
None
N/A
BbuFan
None None
None None
N/A N/A
BbuFan BbuFan
0~259 characters
None
None
N/A
BbuFan
0~11 characters
None
None
N/A
BbuFan
0~23 characters
None
None
N/A
BbuFan
0~19 characters
None
None
N/A
BbuFan
None
N/A
BbuFan
0~4294967295 0~4294967295
None None
None None
N/A N/A
BbuFan BbuFan
None
None
N/A
BbuFan
None
N/A
BbuFan
None None
N/A N/A
BbuFan BbuFan
None
N/A
BbuFan
None
None
N/A
BbuFan
None None
None None
N/A N/A
BbuFan BbuFan
0~63 characters
None
None
N/A
BbuFan
None None
None None
N/A N/A
BbuFan BbuFan
None
None
N/A
BbuFan
0~65535
None
None
N/A
BbuFan
0~65535
None
None
N/A
BbuFan
0~62
None
None
Equipment Planning CCU
15 15
15
CCU
00
CCU
0~62
None
0~1
None
0~1
NO, YES
YES(YES)
Based on the Equipment Planning CCU physical connection
1~7
None
None
GSM, UMTS, LTE
GSM:NO, Based on the Equipment Planning CCU UMTS:NO, LTE:NO physical connection
WS_DISABLE, SS_DISABLE
Water-Immersed Sensor Disabled:ON, Smog Sensor Disabled:ON
It is recommended that WaterImmersed Sensor Disabled be set to ON, Smog Sensor Disabled be set to ON.
CONNECTED, DISCONNECTED
None
None
N/A
CCU
CONNECTED, DISCONNECTED
None
None
N/A
CCU
0~4294967295 0~4294967295
None None
None None
N/A N/A
CCU CCU
0~4294967295
None
None
N/A
CCU
0~249
None
Default/Recommen CPRILBR ded Value
LBR0, LBR1, LBR2, LBR3, LBR4, LBR5, None LBR6
None
N/A
CPRILBR
NEGOTIATED, NEGOTIATING, NOTREADY, TIMEOUT, USERCONFIG
None
None
N/A
CPRILBR
None
N/A
CPRILBR
NEGOTIATED, NEGOTIATING, NOTREADY, TIMEOUT, USERCONFIG
None
None
N/A
CPRILBR
0~62 0~254 0~7
None None None
None None None
N/A N/A N/A
CPRILBR CPRILBR CPRILBR
HEAD, TAIL
None
None
N/A
CPRILBR
None
N/A
CPRILBR
0~62
None
Equipment Planning CpriPort
0~1,4~5,60~254
None
0~8
None
None
0~5
None
None
614M, 1.25G, 2.5G, 4.9G, 6.1G, 9.8G, None UNKNOWN, NULL
None
N/A
CpriPort
LOCKED, UNLOCKED, SHUTINGDOWN, INVALID
None
None
N/A
CpriPort
INPOSITION, NOTINPOSITION, INVALID
None
None
N/A
CpriPort
Slave, Master, NULL
None
None
N/A
CpriPort
SFP_OPTICAL, ESFP_OPTICAL, SFP_ELECTRIC, SCSI_ELECTRIC, GE, UNKNOWN, NULL
None
None
N/A
CpriPort
0~4294967295
None
None
N/A
CpriPort
0~4294967295
None
None
N/A
CpriPort
0~4294967295
None
None
N/A
CpriPort
0~4294967295
None
None
N/A
CpriPort
0~4294967295
None
None
N/A
CpriPort
CPRI_MUX, NORMAL, None UNKNOWN, NULL
None
N/A
CpriPort
DC, AC
DC(DC)
None
Equipment Planning ENERGYCON
0~7
None
Equipment Planning MPT
0~1
None
6~7
None
None
UMPT, LMPT
None
None
Unknown, NULL, Active, Standby
None
None
N/A
MPT
None
None
N/A
MPT
Enabled, Disabled
None
None
N/A
MPT
None
N/A
MPT
0~2047 characters
None
None
N/A
MPT
None None
None None
N/A N/A
MPT MPT
0~259 characters
None
None
N/A
MPT
0~11 characters
None
None
N/A
MPT
0~23 characters
None
None
N/A
MPT
0~19 characters
None
None
N/A
MPT
None
N/A
MPT
0~4294967295 0~4294967295
None None
None None
N/A N/A
MPT MPT
None
None
N/A
MPT
None
N/A
MPT
None None
N/A N/A
MPT MPT
None
N/A
MPT
None
None
N/A
MPT
None None
None None
N/A N/A
MPT MPT
0~63 characters
None
None
N/A
MPT
None None
None None
N/A N/A
MPT MPT
None
None
N/A
MPT
0~65535
None
None
N/A
MPT
0~65535
None
None
N/A
MPT
0~7
None
Equipment Planning PEU
0~1
None
18~19
None
None
NULL NULL
None None
None None
N/A N/A
PEU PEU
None
None
N/A
PEU
Enabled, Disabled
None
None
N/A
PEU
None
N/A
PEU
0~2047 characters
None
None
N/A
PEU
None None
None None
N/A N/A
PEU PEU
0~259 characters
None
None
N/A
PEU
0~11 characters
None
None
N/A
PEU
0~23 characters
None
None
N/A
PEU
0~19 characters
None
None
N/A
PEU
None
N/A
PEU
0~4294967295 0~4294967295
None None
None None
N/A N/A
PEU PEU
None
None
N/A
PEU
None
N/A
PEU
None None
N/A N/A
PEU PEU
None
N/A
PEU
None
None
N/A
PEU
None None
None None
N/A N/A
PEU PEU
0~63 characters
None
None
N/A
PEU
None None
None None
N/A N/A
PEU PEU
None
None
N/A
PEU
0~65535
None
None
N/A
PEU
0~65535
None
None
N/A
PEU
DISABLE, ENABLE DISABLE(Disable)
DISABLE(Disable)
Engineering Design PSUIS
0~62
None
None
Equipment Planning SFP
0~1,4~5,60~254
None
None
0~8
None
None
0~8
None
None
INPOSITION, NOTINPOSITION, INVALID
None
None
N/A
SFP
SFP, ESFP, SFP_ELECTRIC, QSFP, EQSFP, UNKNOWN
None
None
N/A
SFP
0~15 characters
None
None
N/A
SFP
SINGLEMODE, MULTIMODE, UNKNOWN
None
None
N/A
SFP
0~65535
None
None
N/A
SFP
0~25500, step:100
None
None
N/A
SFP
0~255
None
None
N/A
SFP
0~25500, step:100
None
None
N/A
SFP
0~2550, step:10
None
None
N/A
SFP
0~2550, step:10
None
None
N/A
SFP
-128~128, step:0.1
None
None
N/A
SFP
0~6553500, step:100
None
None
N/A
SFP
0~131070, step:2
None
None
N/A
SFP
0~6553.5, step:0.1
None
None
N/A
SFP
0~6553.5, step:0.1
None
None
N/A
SFP
0~255
None
None
N/A
SFP
0~7
None
Equipment Planning TRP
0~1
None
0~6
None
None
UIEB, UTRPc
None
None
Unknown, NULL, Active, Standby
None
None
N/A
TRP
None
None
N/A
TRP
Enabled, Disabled
None
None
N/A
TRP
None
N/A
TRP
0~2047 characters
None
None
N/A
TRP
None None
None None
N/A N/A
TRP TRP
0~259 characters
None
None
N/A
TRP
0~11 characters
None
None
N/A
TRP
0~23 characters
None
None
N/A
TRP
0~19 characters
None
None
N/A
TRP
None
N/A
TRP
0~4294967295 0~4294967295
None None
None None
N/A N/A
TRP TRP
None
None
N/A
TRP
None
N/A
TRP
None None
N/A N/A
TRP TRP
None
N/A
TRP
None
None
N/A
TRP
None None
None None
N/A N/A
TRP TRP
0~63 characters
None
None
N/A
TRP
None None
None None
N/A N/A
TRP TRP
None
None
N/A
TRP
0~65535
None
None
N/A
TRP
0~65535
None
None
N/A
TRP
0~7
None
None
Equipment Planning UCIU
0~1 0~7
None None
None None
Equipment Planning UCIU Equipment Planning UCIU
None
None
N/A
UCIU
Enabled, Disabled
None
None
N/A
UCIU
None
N/A
UCIU
0~2047 characters
None
None
N/A
UCIU
None None
None None
N/A N/A
UCIU UCIU
0~259 characters
None
None
N/A
UCIU
0~11 characters
None
None
N/A
UCIU
0~23 characters
None
None
N/A
UCIU
0~19 characters
None
None
N/A
UCIU
None
N/A
UCIU
0~4294967295 0~4294967295
None None
None None
N/A N/A
UCIU UCIU
None
None
N/A
UCIU
None
N/A
UCIU
None None
N/A N/A
UCIU UCIU
None
N/A
UCIU
None
None
N/A
UCIU
None None
None None
N/A N/A
UCIU UCIU
0~63 characters
None
None
N/A
UCIU
None None
None None
N/A N/A
UCIU UCIU
None
None
N/A
UCIU
0~65535
None
None
N/A
UCIU
0~65535
None
None
N/A
UCIU
0~7
None
Equipment Planning UEIU
0~1
None
18~19
None
None
None
None
N/A
UEIU
Enabled, Disabled
None
None
N/A
UEIU
None
N/A
UEIU
0~2047 characters
None
None
N/A
UEIU
None None
None None
N/A N/A
UEIU UEIU
0~259 characters
None
None
N/A
UEIU
0~11 characters
None
None
N/A
UEIU
0~23 characters
None
None
N/A
UEIU
0~19 characters
None
None
N/A
UEIU
None
N/A
UEIU
0~4294967295 0~4294967295
None None
None None
N/A N/A
UEIU UEIU
None
None
N/A
UEIU
None
N/A
UEIU
None None
N/A N/A
UEIU UEIU
None
N/A
UEIU
None
None
N/A
UEIU
None None
None None
N/A N/A
UEIU UEIU
0~63 characters
None
None
N/A
UEIU
None None
None None
N/A N/A
UEIU UEIU
None
None
N/A
UEIU
0~65535
None
None
N/A
UEIU
0~65535
None
None
N/A
UEIU
0~7
None
Equipment Planning USCU
0~1
None
0~5
None
None
None
None
N/A
USCU
Enabled, Disabled
None
None
N/A
USCU
None
N/A
USCU
0~2047 characters
None
None
N/A
USCU
None None
None None
N/A N/A
USCU USCU
0~259 characters
None
None
N/A
USCU
0~11 characters
None
None
N/A
USCU
0~23 characters
None
None
N/A
USCU
0~19 characters
None
None
N/A
USCU
None
N/A
USCU
0~4294967295 0~4294967295
None None
None None
N/A N/A
USCU USCU
None
None
N/A
USCU
None
N/A
USCU
None None
N/A N/A
USCU USCU
None
N/A
USCU
None
None
N/A
USCU
None None
None None
N/A N/A
USCU USCU
0~63 characters
None
None
N/A
USCU
None None
None None
N/A N/A
USCU USCU
None
None
N/A
USCU
0~65535
None
None
N/A
USCU
0~65535
None
None
N/A
USCU
0~64 characters
NULL
None
Equipment Planning Equipment
ON, OFF
OFF(OFF)
None
Engineering Design Equipment
ON, OFF
OFF(OFF)
None
NORMAL, INSTALL, EXPAND, UPGRADE, TESTING, ExpandStatus1, ExpandStatus2, ExpandStatus3, ExpandStatus4, ExpandStatus5, ExpandStatus6, ExpandStatus7, ExpandStatus8, ExpandStatus9, ExpandStatus10
NORMAL(NORMAL None )
2000-0101T00:00:00+00:00 2000-01None ~2037-1201T00:00:00+00:00 31T23:59:59+00:00
2000-0101T00:00:00+00:00 2037-12None ~2037-1231T23:59:59+00:00 31T23:59:59+00:00
0~255 characters
None
None
NORMAL, INSTALL, EXPAND, UPGRADE, TESTING, ExpandStatus1, ExpandStatus2, ExpandStatus3, ExpandStatus4, ExpandStatus5, ExpandStatus6, ExpandStatus7, ExpandStatus8, ExpandStatus9, ExpandStatus10
None
None
N/A
Equipment
None
39.0~48.0, step:0.1 450
None
39.0~60.0, step:0.1 455
None
0~62
None
None
Equipment Planning Cabinet
APM30, TMC, BBC, PS4890, OMB, RFC, BTS3900, VIRTUAL(Virtual BTS3900L, Cabinet) BTS3900AL, VIRTUAL, TP48600A, ILC29
None
0~79 characters
NULL
None
0~31 characters
None
None
N/A
Cabinet
0~62
None
None
Equipment Planning Subrack
0~254
None
None
BBU3900, RFU, PMU, TCU, FMU, RRU, EMU, PICO, CCU, UNKNOW
None
None
0~79 characters
NULL
None
Engineering Design Subrack
AC220V, DC-48V, DC+28V, DC+24V, DC-48V-2, AC110V, None RDC-48V, NDC48V
None
N/A
Subrack
None
None
N/A
RU
Enabled, Disabled
None
None
N/A
RU
None
N/A
RU
0~2047 characters
None
None
N/A
RU
0~31 characters
None
None
N/A
RU
0~31 characters
None
None
N/A
RU
0~259 characters
None
None
N/A
RU
0~11 characters
None
None
N/A
RU
0~23 characters
None
None
N/A
RU
0~19 characters
None
None
N/A
RU
None
N/A
RU
0~4294967295 0~4294967295
None None
None None
N/A N/A
RU RU
None
None
N/A
RU
None
N/A
RU
None None
N/A N/A
RU RU
None
N/A
RU
None
None
N/A
RU
None None
None None
N/A N/A
RU RU
0~63 characters
None
None
N/A
RU
None None
None None
N/A N/A
RU RU
None
None
N/A
RU
0~65535
None
None
N/A
RU
0~65535
None
None
N/A
RU
0~62
Default/Recommen EMU ded Value
40~59
40
40
00
0~62
0~254
0~7
None
When the EMU is connected to the MON1 port on the UPEU, set this parameter to 1. When the EMU is connected to the MON0 port on the UPEU, set this Default/Recommen EMU parameter to 0. ded Value When the EMU is connected to the RRU, set this parameter to 0.When the EMU is connected to the CCU, set this parameter to 0~7.
1~30
-20~80
-20~80
50
50
0~100
10
10
0~100
80
80
48V_DISABLE, RES0, RES1, RES2, TS_DISABLE, HS_DISABLE
It is recommended that -48 Voltage -48 Voltage Disabled be set to Disabled:OFF, OFF, Reserved Reserved Sensor Sensor 0 be set to 0:ON, Reserved ON, Reserved Sensor 1:ON, Sensor 1 be set to Reserved Sensor ON, Reserved Equipment Planning EMU 2:ON, Temperature Sensor 2 be set to Sensor ON, Temperature Disabled:OFF, Sensor Disabled be Humidity Sensor set to OFF, and Disabled:OFF Humidity Sensor Disabled be set to OFF. It is recommended that WaterImmersed Sensor Disabled be set to OFF, Smog Sensor Disabled be set to Equipment Planning EMU OFF, Infrared Sensor Disabled be set to ON, and Gating Sensor Disabled be set to OFF. None None N/A N/A EMU EMU
WS_DISABLE, SS_DISABLE, IS_DISABLE, GS_DISABLE
Water -Immersed Sensor Disabled:OFF, Smog Sensor Disabled:OFF, Infrared Sensor Disabled:ON, Gating Sensor Disabled:OFF
2147483648~21474 None 83647 0~100 None
0.0~100.0
None
None
N/A
EMU
-999.99~9999.99
None
None
N/A
EMU
-999.99~9999.99
None
None
N/A
EMU
-999.99~9999.99
None
None
N/A
EMU
-999.99~9999.99
None
None
N/A
EMU
None
None
N/A
EMU
Enabled, Disabled
None
None
N/A
EMU
None
N/A
EMU
0~2047 characters
None
None
N/A
EMU
None None
None None
N/A N/A
EMU EMU
0~259 characters
None
None
N/A
EMU
0~11 characters
None
None
N/A
EMU
0~23 characters
None
None
N/A
EMU
0~19 characters
None
None
N/A
EMU
None
N/A
EMU
0~4294967295 0~4294967295
None None
None None
N/A N/A
EMU EMU
None
None
N/A
EMU
None
N/A
EMU
None None
N/A N/A
EMU EMU
None
N/A
EMU
None
None
N/A
EMU
None None
None None
N/A N/A
EMU EMU
0~63 characters
None
None
N/A
EMU
None None
None None
N/A N/A
EMU EMU
None
None
N/A
EMU
0~65535
None
None
N/A
EMU
0~65535
None
None
N/A
EMU
0~62
Default/Recommen FMU ded Value
11~12
11
11
00
0~62
0~254
0~7
None
When the FMU is connected to the MON1 port on the UPEU, set this parameter to 1. When the FMU is connected to the MON0 port on the UPEU, set this parameter to 0. When the FMU is connected to the RRU, set this parameter to 0. When the FMU is connected to the CCU, set this parameter to a value within the range of 0 to 7.
1~30
14
The FMUs of a maximum of two levels can be connected to a bus. The communication address of the FMU Default/Recommen that is directly FMU ded Value connected to the BBU is set to 14. The communication address of the lowerlevel FMU is set to 15.
Water-Immersed Sensor Default/Recommen Disabled:ON, Smog FMU ded Value Sensor Disabled:ON
0~100
None
None
N/A
FMU
-127~127
None
None
N/A
FMU
-127~127
None
None
N/A
FMU
0~4294967295
None
None
N/A
FMU
DISABLE, ENABLE ENABLE(Enable)
ENABLE(Enable)
Engineering Design FMU
None
None
N/A
FMU
Enabled, Disabled
None
None
N/A
FMU
None
N/A
FMU
0~2047 characters
None
None
N/A
FMU
None None
None None
N/A N/A
FMU FMU
0~259 characters
None
None
N/A
FMU
0~11 characters
None
None
N/A
FMU
0~23 characters
None
None
N/A
FMU
0~19 characters
None
None
N/A
FMU
None
N/A
FMU
0~4294967295 0~4294967295
None None
None None
N/A N/A
FMU FMU
None
None
N/A
FMU
None
N/A
FMU
None None
N/A N/A
FMU FMU
None
N/A
FMU
None
None
N/A
FMU
None None
None None
N/A N/A
FMU FMU
0~63 characters
None
None
N/A
FMU
None None
None None
N/A N/A
FMU FMU
None
None
N/A
FMU
0~65535
None
None
N/A
FMU
0~65535
None
None
N/A
FMU
0~62
Default/Recommen TCU ded Value
8,14
0~3
0~62
0~254
0~7
None
When the TCU is connected to the MON1 port on the UPEU, set this parameter to 1. When the TCU is connected to the MON0 port on the UPEU, set this parameter to 0. When the TCU is connected to the RRU, set this parameter to 0. When the TCU is connected to the CCU, set this parameter to a value within the range of 0 to 7.
1~30
If the manager unit of the TCU is a CCU, no matter the TCU is configured in a BBC or not, it is recommended that the communication address of the TCU used for heat dissipation be set to 6 or 7 and that of the TCU used for heating be set to 28 or 29. If the manager unit of the TCU is a BBU and the TCU Default/Recommen TCU is not configured in ded Value a BBC, it is recommended that the communication address of the TCU used for heat dissipation be set to 6 or 7 and that of the TCU used for heating be set to 28 or 29. For the TCU configured in a BBC, if the communication address of the PMU connected to the BBC is 3, the
-40~10
-20
-20
20~80
68
For the TCU in the BBC, the recommended value is 50. For the Default/Recommen TCU TCU in another ded Value cabinet, the recommended value is 68.
Water-Immersed Sensor Default/Recommen Disabled:ON, Smog TCU ded Value Sensor Disabled:ON
0~3 characters -127~127
None None
None None
N/A N/A
TCU TCU
-127~127
None
None
N/A
TCU
-127~127
None
None
N/A
TCU
0~4294967295
None
None
N/A
TCU
0~4294967295
None
None
N/A
TCU
0~4294967295
None
None
N/A
TCU
0~4294967295 0~4294967295
None None
None None
N/A N/A
TCU TCU
0~4294967295
None
None
N/A
TCU
0~18 characters
None
None
N/A
TCU
0~32 characters
None
None
N/A
TCU
0~18 characters
None
None
N/A
TCU
dantherm, bw, huawei, air-sys, senguang, viasystems, rittal, emerson, APW, hytems, hontech, agisson, pantair, Panasonic, Gore, Flex, Vapel, AVC, JIAYI, Delta, EBM, Protechnic, Sanyo
None
None
N/A
TCU
None
None
N/A
TCU
Enabled, Disabled
None
None
N/A
TCU
None
N/A
TCU
0~2047 characters
None
None
N/A
TCU
None None
None None
N/A N/A
TCU TCU
0~259 characters
None
None
N/A
TCU
0~11 characters
None
None
N/A
TCU
0~23 characters
None
None
N/A
TCU
0~19 characters
None
None
N/A
TCU
None
N/A
TCU
0~4294967295 0~4294967295
None None
None None
N/A N/A
TCU TCU
None
None
N/A
TCU
None
N/A
TCU
None None
N/A N/A
TCU TCU
None
N/A
TCU
None
None
N/A
TCU
None None
None None
N/A N/A
TCU TCU
0~63 characters
None
None
N/A
TCU
None None
None None
N/A N/A
TCU TCU
None
None
N/A
TCU
0~65535
None
None
N/A
TCU
0~65535
None
None
N/A
TCU
0~62
Default/Recommen HtCDPa ded Value
8,14
0~3
-99~70
-99~70
40
40
-99~70
45
45
0~30
0~30
0~30
16
16
0~30
13
13
0~62
Default/Recommen PMU ded Value
77
00
0~62
0~254
0~7
None
When the PMU is connected to the MON1 port on the UPEU, set this parameter to 1. When the PMU is connected to the MON0 port on the UPEU, set this parameter to 0. When the PMU is connected to the RRU, set this parameter to 0. When the PMU is connected to the CCU, set this parameter to a value within the range of 0 to 7.
1~30
APM100, APM200, APM30, EPS4890, EPS4815, APM30(APM 30) SC48200, EPS48200, TP48300A, ETP
APM30(APM 30)
Equipment Planning PMU
60~300
180
180
60~300
280
280
35.0~55.6, step:0.1 450
The recommended value of this parameter for the SC48200 PMU is 470. The Default/Recommen PMU recommended ded Value value of this parameter for other types of PMU is 450.
58.0~60.0, step:0.1 580
The recommended value of this parameter for the SC48200 PMU is ENABLE(Enable). Default/Recommen PMU The recommended ded Value value of this parameter for other types of PMU is DISABLE(Disable).
35.0~55.6, step:0.1 440
-20~20
35~80
50
50
0~50
10
10
50~100
80
80
BT1_DISABLE, AH_DISABLE, AT1_DISABLE, BT2_DISABLE
Battery Temperature Sensor 1 Disabled:OFF, Cabinet Humidity Sensor Disabled:ON, Cabinet Temperature Sensor 1 Disabled:ON, Battery Temperature Sensor 2 Disabled:ON
It is recommended that Battery Temperature Sensor 1 Disabled be set to OFF for PMUs in the APM30, PS4890, and SC48200 and ON for other PMUs, Cabinet Humidity Sensor Disabled be Default/Recommen set to ON, Cabinet PMU ded Value Temperature Sensor 1 Disabled be set to OFF for PMUs in the APM100 and APM200 and ON for other PMUs, and Battery Temperature Sensor 2 Disabled be set to ON.
WS_DISABLE, SS_DISABLE, GS_DISABLE
It is recommended that WaterImmersed Sensor Water-Immersed Disabled be set to Sensor ON, Smog Sensor Disabled:ON, Smog Disabled be set to Default/Recommen Sensor ON, and Gating PMU ded Value Disabled:ON, Sensor Disabled be Gating Sensor set to OFF for Disabled:OFF PMUs in the APM30, APM100, and APM200 and ON for other PMUs.
2147483648~21474 None 83647
None
N/A
PMU
-100.0~100.0 -150.0~150.0
None None
None None
N/A N/A
PMU PMU
2147483648~21474 None 83647 0~100 None
None
N/A
PMU
None
N/A
PMU
PowerOn, LowVoltagePowerO ff, MasterControlPowe rOff, None HighTemperaturePo werOff, LowTemperaturePo werOff
None
N/A
PMU
BoostCharging, FloatCharging, ForceBoostChargin None g, Discharging, Sleeping
None
N/A
PMU
-150.0~150.0
None
None
N/A
PMU
CurrentLimiting, NoCurrentLimiting
None
None
N/A
PMU
PowerOn, LowVoltagePowerO ff, MasterControlPowe None rOff, ManualPowerOff, HighTemperaturePo werOff
None
N/A
PMU
0~100
None
None
N/A
PMU
2147483648~21474 None 83647 CHARGE, DISCHARGE, REC, None END
None
N/A
PMU
None
N/A
PMU
-150.0~150.0
None
None
N/A
PMU
-150.0~150.0
None
None
N/A
PMU
2147483648~21474 None 83647
None
N/A
PMU
0~4294967295 0~4294967295
None None
None None
N/A N/A
PMU PMU
0~4294967295
None
None
N/A
PMU
0~18 characters
None
None
N/A
PMU
0~32 characters
None
None
N/A
PMU
0~18 characters
None
None
N/A
PMU
Huawei, Emerson, Holdluck-ZYT, Power-One, Kehua, DeltaElectronics, EltekEnergy, Switchtec, TycoElectronics, ARTESYN, None CHROMA, LuckyValley, ACBEL, Zippy, GuoyaoElectronics, DPC, GoldPower, SungrowPowerSup ply, Ecom
None
N/A
PMU
UNSUPPORTED, SUPPORTED
None
None
N/A
PMU
DISABLE, ENABLE None
None
N/A
PMU
SUCCEEDED, BRDNOTREADY, UNSUPPORTED, BATNOTEXIST, INTERNALERR
None
None
N/A
PMU
0~65535
None
None
N/A
PMU
0~4294967295
None
None
N/A
PMU
0~4294967295
None
None
N/A
PMU
UNSUPPORTED, SUPPORTED
None
None
N/A
PMU
None
N/A
PMU
None
None
N/A
PMU
Enabled, Disabled
None
None
N/A
PMU
None
N/A
PMU
0~2047 characters
None
None
N/A
PMU
None None
None None
N/A N/A
PMU PMU
0~259 characters
None
None
N/A
PMU
0~11 characters
None
None
N/A
PMU
0~23 characters
None
None
N/A
PMU
0~19 characters
None
None
N/A
PMU
None
N/A
PMU
0~4294967295 0~4294967295
None None
None None
N/A N/A
PMU PMU
None
None
N/A
PMU
None
N/A
PMU
None None
N/A N/A
PMU PMU
None
N/A
PMU
None
None
N/A
PMU
None None
None None
N/A N/A
PMU PMU
0~63 characters
None
None
N/A
PMU
None None
None None
N/A N/A
PMU PMU
None
None
N/A
PMU
0~65535
None
None
N/A
PMU
0~65535
None
None
N/A
PMU
0~62
Default/Recommen DieselGen ded Value
77
00
DISABLE(Disable)
0.1~100.0, step:0.1 125
125
1~7 characters
None
None
N/A
DieselGen
-150.0~150.0
None
None
N/A
DieselGen
0~4294967295
None
None
N/A
DieselGen
0~62
Default/Recommen Battery ded Value
77
00
INNER, OUTER
INNER(Inner)
The battery installation type of the SC48200 PMU is OUTER. The battery installation type of other types of PMU should be set based on the actual situation.
Equipment Planning Battery
30~240
60
60
43.3~57.6, step:0.1 565
565
5~5000
36
Based on the PMU type: The recommended value for the APM30 is 30. The recommended value for the APM100 is 100. The recommended value for the Engineering Design Battery APM200 is 200. The recommended value for the PS4890 is 30. The recommended value for the EPS4815 is 65. The recommended value for the SC48200 is 1000.
0.05~0.25, step:0.01
15
15
43.2~57.5, step:0.1 535
535
ENABLE(Enable)
40~70
53
The recommended value of this parameter for the SC48200 PMU is Default/Recommen 60. The Battery ded Value recommended value of this parameter for other types of PMU is 53.
ENABLE(Enable)
35.0~55.6, step:0.1 430
The recommended value of this parameter for the SC48200 PMU is 460. The Default/Recommen Battery recommended ded Value value of this parameter for other types of PMU is 430.
0~500
80
80
-20~20
-19
-19
35~80
50
50
1~2
Engineering Design Battery
VRLA_BAT, LI_BAT
VRLA_BAT(VRLA Battery)
VRLA_BAT(VRLA Battery)
Engineering Design Battery
0~4294967295
None
None
N/A
Battery
0~4294967295
None
None
N/A
Battery
0~4294967295
None
None
N/A
Battery
0~4294967295
None
None
N/A
Battery
0~4294967295
None
None
N/A
Battery
0~4294967295
None
None
N/A
Battery
0~4294967295
None
None
N/A
Battery
0~4294967295
None
None
N/A
Battery
0~4294967295
None
None
N/A
Battery
0~4294967295
None
None
N/A
Battery
0~4294967295
None
None
N/A
Battery
0~4294967295
None
None
N/A
Battery
0~4294967295
None
None
N/A
Battery
0~4294967295
None
None
N/A
Battery
0~4294967295
None
None
N/A
Battery
0~4294967295
None
None
N/A
Battery
0~4294967295
None
None
N/A
Battery
0~4294967295
None
None
N/A
Battery
0~4294967295
None
None
N/A
Battery
0~4294967295
None
None
N/A
Battery
0~4294967295
None
None
N/A
Battery
2000-01-01~209912-31
None
None
N/A
Battery
5~5000
36
Based on the PMU type: The recommended value for the APM30 is 30. The recommended value for the APM100 is 100. The recommended value for the Engineering Design Battery APM200 is 200. The recommended value for the PS4890 is 30. The recommended value for the EPS4815 is 65. The recommended value for the SC48200 is 1000.
0~62
Default/Recommen BatCTPa ded Value
77
00
0.01~50.00, step:0.01
1200
1200
0.01~50.00, step:0.01
600
600
0.01~50.00, step:0.01
300
300
0.01~50.00, step:0.01
150
150
0.01~50.00, step:0.01
100
100
0.01~50.00, step:0.01
70
70
0.01~50.00, step:0.01
50
50
0.01~50.00, step:0.01
40
40
0.01~50.00, step:0.01
30
30
0.01~50.00, step:0.01
25
25
80~100
80
80
1.70~2.20, step:0.01
190
190
1~50
24
24
1~100
10
10
1~240
60
60
40.0~54.0, step:0.1 450
450
NOAUTOTEST, PERIOD, POWERCUT(Powe POWERCUT(Powe Default/Recommen POWERCUT, BatCTPa r Off Auto Test) r Off Auto Test) ded Value PERIODPOWERC UT
30~240
120
120
1~60
14
14
STANDARD, SIMPLE, TIMER, PWROFF, NONE
None
None
N/A
BatCTPa
2000-01-01 00:00:00~2038-12- None 31 23:59:59
None
N/A
BatCTPa
BelowEndVol, OverTime, CurrRecover, ManualEnd, AlmEnd
None
None
N/A
BatCTPa
None, Normal, PreAlm, Alm
None
None
N/A
BatCTPa
0~100
None
None
N/A
BatCTPa
1~7 characters
None
None
N/A
BatCTPa
-100.00~100.00
None
None
N/A
BatCTPa
-150.0~150.0
None
None
N/A
BatCTPa
0~4294967295
None
None
N/A
BatCTPa
2147483648~21474 None 83647 0~62 0
None
N/A
BatCTPa
Default/Recommen PSU ded Value
77
1~7
None
NORMAL, COMMUNICATEFA ILED, SHUTDOWN, None FAULT, PROTECT, UNCONFIGURED, ILLEGAL
None
N/A
PSU
0~18 characters
None
None
N/A
PSU
Huawei, Emerson, Holdluck-ZYT, Power-One, Kehua, DeltaElectronics, EltekEnergy, Switchtec, TycoElectronics, ARTESYN, None CHROMA, LuckyValley, ACBEL, Zippy, GuoyaoElectronics, DPC, GoldPower, SungrowPowerSup ply, Ecom
None
N/A
PSU
0~4294967295
None
None
N/A
PSU
0~4294967295
None
None
N/A
PSU
0~18 characters
None
None
N/A
PSU
None
None
N/A
PSU
Enabled, Disabled
None
None
N/A
PSU
None
N/A
PSU
0~2047 characters
None
None
N/A
PSU
None None
None None
N/A N/A
PSU PSU
0~259 characters
None
None
N/A
PSU
0~11 characters
None
None
N/A
PSU
0~23 characters
None
None
N/A
PSU
0~19 characters
None
None
N/A
PSU
None
N/A
PSU
0~4294967295 0~4294967295
None None
None None
N/A N/A
PSU PSU
None
None
N/A
PSU
None
N/A
PSU
None None
N/A N/A
PSU PSU
None
N/A
PSU
None
None
N/A
PSU
None None
None None
N/A N/A
PSU PSU
0~63 characters
None
None
N/A
PSU
None None
None None
N/A N/A
PSU PSU
None
None
N/A
PSU
0~65535
None
None
N/A
PSU
0~65535
None
None
N/A
PSU
0~62
Engineering Design OutPort
40~59
40
40
00
0~5
None
None
0~50 characters
NULL
None
OFF, ON
OFF(Off)
OFF(Off)
0~62
None
None
Engineering Design AlmPort
0~1,7~8,11~12,14~ None 15,40~254
None
0~3,18~19
None
None
0~35
None
None
OFF, ON
OFF(Off)
OFF(Off)
Equipment Planning AlmPort
65033~65233
65033
65033
BOOL, VALUE
BOOL(Digital Port)
BOOL(Digital Port)
HIGH, LOW
LOW(Low Voltage) LOW(Low Voltage) Equipment Planning AlmPort
-999.99~9999.99, step:0.01
9900
9900
-999.99~9999.99, step:0.01
100
100
VOLTAGE, CURRENT
VOLTAGE(Voltage VOLTAGE(Voltage Equipment Planning AlmPort Type) Type)
-999.99~9999.99, step:0.01
10000
10000
-999.99~9999.99, step:0.01
0~9999.99, step:0.01
100
100
0~9999.99, step:0.01
ALL, SSL
ALL(All Type)
None
Default/Recommen SSL ded Value
NONE, PEER
PEER(Verify Peer Certificate)
None
Default/Recommen SSL ded Value
0~62
None
None
Equipment Planning AAU
60~254
None
None
0 None
None
0~31 characters
NULL
None
MAAU
None
None
LOCKED, UNLOCKED
UNLOCKED(Unlock UNLOCKED(Unlock Engineering Design AAU ed) ed)
None
None
N/A
AAU
Enabled, Disabled
None
None
N/A
AAU
None
N/A
AAU
0~2047 characters
None
None
N/A
AAU
None None
None None
N/A N/A
AAU AAU
0~259 characters
None
None
N/A
AAU
0~11 characters
None
None
N/A
AAU
0~23 characters
None
None
N/A
AAU
0~19 characters
None
None
N/A
AAU
None
N/A
AAU
0~4294967295 0~4294967295
None None
None None
N/A N/A
AAU AAU
None
None
N/A
AAU
None
N/A
AAU
None None
N/A N/A
AAU AAU
None
N/A
AAU
None
None
N/A
AAU
ON, OFF
ON(ON)
ON
Engineering Design AAU
1.5~10, step:0.1
30
None
1.5~3, step:0.1
20
None
0~7
None
None
0~249
None
None
TRUNK
TRUNK(TRUNK)
TRUNK
TD_SCDMA, LTE_TDD, TDS_TDL, LTE_FDD, WiMAX_LTE, CDMA_LTE, GSM_LTE, UMTS_ONLY, UMTS_LTE
None
None
0~8
None
None
0~8
None
None
0~4294967295
None
None
N/A
AAU
0~4294967295
None
None
N/A
AAU
0~429496729.5, step:0.1
None
None
N/A
AAU
0~429496729.5, step:0.1
None
None
N/A
AAU
0~429496729.5, step:0.1
None
None
N/A
AAU
0~429496729.5, step:0.1
None
None
N/A
AAU
0~50, step:0.1
None
None
N/A
AAU
0~6553.5, step:0.1
None
None
N/A
AAU
0~31
None
None
N/A
AAU
-100~200
None
None
N/A
AAU
-100~200
None
None
N/A
AAU
0~6
None
None
N/A
AAU
0~24 characters
None
None
N/A
AAU
LO_TD, TL, LO, WO, WL, C0, CL, CW, CWL, GO, GL, GW, GWL, GC, GCL, GCW, GCWL, UO, UL, UW, UWL, None UC, UCL, UCW, UCWL, GU, UGL, UGW, UGWL, UGC, UGCL, UGCW, UGCWL, NULL
None
N/A
AAU
CONNECTHEAD, CONNECTTAIL, CONNECTBOTH, None SEPERATEBYBRE AK, LINKDOWN
None
N/A
AAU
0~429496729.5, step:0.1
None
None
N/A
AAU
0~429496729.5, step:0.1
None
None
N/A
AAU
0~31
None
None
N/A
AAU
0~4294967295
None
None
N/A
AAU
ON, OFF
OFF(OFF)
ON(ON)
N/A
AAU
1~60
N/A
AAU
POW_IQ_MODE, POW_MODE, IQ_MODE
POW_IQ_MODE(P None OW_IQ_MODE)
N/A
AAU
9~18
None
None
N/A
AAU
HALFSECOND, ONESECOND, TWOSECOND, THREESECOND, FOURSECOND, FIVESECOND
HALFSECOND(HA None LFSECOND)
N/A
AAU
0~65535 0~31 characters
None NULL
None None
N/A N/A
AAU AAU
SUCCESS, FAILURE, UNKNOWTYPE
SUCCESS(SUCCE None SS)
N/A
AAU
USERDEFINE, DEFAULT
N/A
AAU
0~1000000000
None
None
N/A
AAU
1.25G, 2.5G, 3.0G, None 4.9G, 6.1G, 9.8G
None
N/A
AAU
None None
None None
N/A N/A
AAU AAU
0~63 characters
None
None
N/A
AAU
None None
None None
N/A N/A
AAU AAU
None
None
N/A
AAU
0~65535
None
None
N/A
AAU
0~65535
None
None
N/A
AAU
LOCKED, UNLOCKED
UNLOCKED(Unlock UNLOCKED(Unlock Engineering Design RE ed) ed)
ON, OFF
ON(ON)
ON
Engineering Design RE
1.5~10, step:0.1
30
None
1.5~3, step:0.1
20
None
0~7
None
None
Equipment Planning RE
0~249
None
None
TRUNK
TRUNK(TRUNK)
TRUNK
None
None
0~8
None
None
0~8
None
None
0~4294967295
None
None
N/A
RE
0~4294967295
None
None
N/A
RE
0~429496729.5, step:0.1
None
None
N/A
RE
0~429496729.5, step:0.1
None
None
N/A
RE
0~429496729.5, step:0.1
None
None
N/A
RE
0~429496729.5, step:0.1
None
None
N/A
RE
0~50, step:0.1
None
None
N/A
RE
0~6553.5, step:0.1
None
None
N/A
RE
0~31
None
None
N/A
RE
-100~200
None
None
N/A
RE
-100~200
None
None
N/A
RE
0~6
None
None
N/A
RE
0~24 characters
None
None
N/A
RE
None
N/A
RE
None
N/A
RE
0~429496729.5, step:0.1
None
None
N/A
RE
0~429496729.5, step:0.1
None
None
N/A
RE
0~31
None
None
N/A
RE
0~4294967295
None
None
N/A
RE
ON, OFF
OFF(OFF)
ON(ON)
N/A
RE
1~60
N/A
RE
N/A
RE
9~18
None
None
N/A
RE
N/A
RE
None NULL
None None
N/A N/A
RE RE
N/A
RE
USERDEFINE, DEFAULT
N/A
RE
0~1000000000
None
None
N/A
RE
1.25G, 2.5G, 3.0G, None 4.9G, 6.1G, 9.8G
None
N/A
RE
None
None
N/A
RE
Enabled, Disabled
None
None
N/A
RE
None
N/A
RE
0~2047 characters
None
None
N/A
RE
None None
None None
N/A N/A
RE RE
0~259 characters
None
None
N/A
RE
0~11 characters
None
None
N/A
RE
0~23 characters
None
None
N/A
RE
0~19 characters
None
None
N/A
RE
None
N/A
RE
0~4294967295 0~4294967295
None None
None None
N/A N/A
RE RE
None
None
N/A
RE
None
N/A
RE
None None
N/A N/A
RE RE
None
N/A
RE
None
None
N/A
RE
None None
None None
N/A N/A
RE RE
0~63 characters
None
None
N/A
RE
None None
None None
N/A N/A
RE RE
None
None
N/A
RE
0~65535
None
None
N/A
RE
0~65535
None
None
N/A
RE
0~62
None
Engineering Design RFU
4~5
None
None
0~8
None
None
MRFU, LRFU
None
None
LOCKED, UNLOCKED
UNLOCKED(Unlock UNLOCKED(Unlock Engineering Design RFU ed) ed)
None
None
N/A
RFU
Enabled, Disabled
None
None
N/A
RFU
None
N/A
RFU
0~2047 characters
None
None
N/A
RFU
None None
None None
N/A N/A
RFU RFU
0~259 characters
None
None
N/A
RFU
0~11 characters
None
None
N/A
RFU
0~23 characters
None
None
N/A
RFU
0~19 characters
None
None
N/A
RFU
None
N/A
RFU
0~4294967295 0~4294967295
None None
None None
N/A N/A
RFU RFU
None
None
N/A
RFU
None
N/A
RFU
None None
N/A N/A
RFU RFU
None
N/A
RFU
None
None
N/A
RFU
ON, OFF
ON(ON)
ON
1.5~10, step:0.1
30
None
1.5~3, step:0.1
20
None
0~7
None
None
Equipment Planning RFU
0~249
None
None
TRUNK
TRUNK(TRUNK)
TRUNK
None
None
0~8
None
None
0~8
None
None
0~4294967295
None
None
N/A
RFU
0~4294967295
None
None
N/A
RFU
0~429496729.5, step:0.1
None
None
N/A
RFU
0~429496729.5, step:0.1
None
None
N/A
RFU
0~429496729.5, step:0.1
None
None
N/A
RFU
0~429496729.5, step:0.1
None
None
N/A
RFU
0~50, step:0.1
None
None
N/A
RFU
0~6553.5, step:0.1
None
None
N/A
RFU
0~31
None
None
N/A
RFU
-100~200
None
None
N/A
RFU
-100~200
None
None
N/A
RFU
0~6
None
None
N/A
RFU
0~24 characters
None
None
N/A
RFU
None
N/A
RFU
None
N/A
RFU
0~429496729.5, step:0.1
None
None
N/A
RFU
0~429496729.5, step:0.1
None
None
N/A
RFU
0~31
None
None
N/A
RFU
0~4294967295
None
None
N/A
RFU
ON, OFF
OFF(OFF)
ON(ON)
N/A
RFU
1~60
N/A
RFU
N/A
RFU
9~18
None
None
N/A
RFU
N/A
RFU
None NULL
None None
N/A N/A
RFU RFU
N/A
RFU
USERDEFINE, DEFAULT
N/A
RFU
0~1000000000
None
None
N/A
RFU
1.25G, 2.5G, 3.0G, None 4.9G, 6.1G, 9.8G
None
N/A
RFU
None None
None None
N/A N/A
RFU RFU
0~63 characters
None
None
N/A
RFU
None None
None None
N/A N/A
RFU RFU
None
None
N/A
RFU
0~65535
None
None
N/A
RFU
0~65535
None
None
N/A
RFU
00
None
Engineering Design RRU
60~254
None
None
00
None
0~31 characters
NULL
None
MRRU, PRRU, LRRU
None
None
PIMOFFLINE 120~300
None None
None None
N/A N/A
RRU RRU
5~20
None
None
N/A
RRU
0~1
None
None
N/A
RRU
IsInerefered, IsNotInterfered 0~4294967295 0~4294967295
None
None
N/A
RRU
None None
None None
N/A N/A
RRU RRU
0~4294967295
None
None
N/A
RRU
LOCKED, UNLOCKED
UNLOCKED(Unlock UNLOCKED(Unlock Engineering Design RRU ed) ed)
None
None
N/A
RRU
Enabled, Disabled
None
None
N/A
RRU
None
N/A
RRU
0~2047 characters
None
None
N/A
RRU
None None
None None
N/A N/A
RRU RRU
0~259 characters
None
None
N/A
RRU
0~11 characters
None
None
N/A
RRU
0~23 characters
None
None
N/A
RRU
0~19 characters
None
None
N/A
RRU
None
N/A
RRU
0~4294967295 0~4294967295
None None
None None
N/A N/A
RRU RRU
None
None
N/A
RRU
None
N/A
RRU
None None
N/A N/A
RRU RRU
None
N/A
RRU
None
None
N/A
RRU
ON, OFF
ON(ON)
ON
1.5~10, step:0.1
30
None
1.5~3, step:0.1
20
None
0~7
None
None
Equipment Planning RRU
0~249
None
None
TRUNK
TRUNK(TRUNK)
TRUNK
None
None
0~8
None
None
0~8
None
None
0~4294967295
None
None
N/A
RRU
0~4294967295
None
None
N/A
RRU
0~429496729.5, step:0.1
None
None
N/A
RRU
0~429496729.5, step:0.1
None
None
N/A
RRU
0~429496729.5, step:0.1
None
None
N/A
RRU
0~429496729.5, step:0.1
None
None
N/A
RRU
0~50, step:0.1
None
None
N/A
RRU
0~6553.5, step:0.1
None
None
N/A
RRU
0~31
None
None
N/A
RRU
-100~200
None
None
N/A
RRU
-100~200
None
None
N/A
RRU
0~6
None
None
N/A
RRU
0~24 characters
None
None
N/A
RRU
None
N/A
RRU
None
N/A
RRU
0~429496729.5, step:0.1
None
None
N/A
RRU
0~429496729.5, step:0.1
None
None
N/A
RRU
0~31
None
None
N/A
RRU
0~4294967295
None
None
N/A
RRU
ON, OFF
OFF(OFF)
ON(ON)
N/A
RRU
1~60
N/A
RRU
N/A
RRU
9~18
None
None
N/A
RRU
N/A
RRU
None NULL
None None
N/A N/A
RRU RRU
N/A
RRU
USERDEFINE, DEFAULT
N/A
RRU
0~1000000000
None
None
N/A
RRU
1.25G, 2.5G, 3.0G, None 4.9G, 6.1G, 9.8G
None
N/A
RRU
None None
None None
N/A N/A
RRU RRU
0~63 characters
None
None
N/A
RRU
None None
None None
N/A N/A
RRU RRU
None
None
N/A
RRU
0~65535
None
None
N/A
RRU
0~65535
None
None
N/A
RRU
0~249
None
None
Engineering Design RRUCHAIN
CHAIN, RING, LOADBALANCE
None
None
COLD, HOT
COLD(COLD)
None
0~7
None
0~1
None
0~5
None
None
0~5
None
None
0~7
None
0~1
None
0~5
None
None
0~5
None
None
0~8,255
255
None
Equipment Planning RRUCHAIN
0~8,255
255
None
Equipment Planning RRUCHAIN
LOCALPORT, PEERPORT
LOCALPORT(local None port)
1.25G, 2.5G, 4.9G, AUTO(Auto) 6.1G, 9.8G, AUTO
None
0~3
None
None
N/A
RRUCHAIN
0~3
None
None
N/A
RRUCHAIN
0~62
None
Engineering Design RxBranch
4~5,60~254
None
None
0~8
None
0~7
None
None
ON, OFF
ON(ON)
ON(ON)
0~22, step:0.5
None
ON, OFF
None
None
N/A
RxBranch
0~429496729.5, step:0.1
None
None
N/A
RxBranch
0~429496729.5, step:0.1
None
None
N/A
RxBranch
0~31
None
None
N/A
RxBranch
0~429496729.5, step:0.1
None
None
N/A
RxBranch
0~429496729.5, step:0.1
None
None
N/A
RxBranch
0~31
None
None
N/A
RxBranch
0~62
None
None
Engineering Design TxBranch
4~5,60~254
None
None
0~8
None
None
0~7
None
None
ON, OFF
ON(ON)
ON(ON)
1~25, step:0.01
None
None
N/A
TxBranch
ON, OFF
None
None
N/A
TxBranch
-10~1, step:0.1
None
N/A
TxBranch
0~13107, step:0.2
None
None
N/A
TxBranch
3~13, step:0.1
None
None
N/A
TxBranch
20~30 0~65535 0~65535
None None None
None None None
N/A N/A N/A
TxBranch TxBranch TxBranch
0~63 characters
None
None
N/A
TxBranch
0,5000~655000, step:10
None
None
N/A
TxBranch
0,5000~655000, step:10
None
None
N/A
TxBranch
0~429496729.5, step:0.1
None
None
N/A
TxBranch
0~429496729.5, step:0.1
None
None
N/A
TxBranch
0,5000~655000, step:10
None
None
N/A
TxBranch
0~429496729.5, step:0.1
None
None
N/A
TxBranch
0~429496729.5, step:0.1
None
None
N/A
TxBranch
0~31
None
None
N/A
TxBranch
0~429496729.5, step:0.1
None
None
N/A
TxBranch
0~429496729.5, step:0.1
None
None
N/A
TxBranch
0~31
None
None
N/A
TxBranch
0~6553.5, step:0.1
None
None
N/A
TxBranch
0~6553.5, step:0.1 Normal, Unknown, Crossed
None
None
N/A
TxBranch
None
None
N/A
TxBranch
Valid IP address
0.0.0.0
None
Equipment Planning NtpCp
1~525600
None
6 hours
123~5999,6100~65 123 534
None
IPV4, IPV6
IPV4(IPv4)
None
Default/Recommen NtpCp ded Value
Valid IP address
0:0:0:0:0:0:0:0
None
PLAIN, DES_S, DES_N, DES_A, MD5
PLAIN(Plain)
None
1~16 characters
None
None
1~4294967295
None
None
Slaver, Master
Slaver(Slave)
None
Engineering Design NtpCp
GMT-1200, GMT1100, GMT-1000, GMT-0930, GMT0900, GMT-0800, GMT-0700, GMT0600, GMT-0500, GMT-0430, GMT0400, GMT-0330, GMT-0300, GMT0200, GMT-0100, GMT, GMT+0100, GMT+0200, GMT+0300, GMT+0330, GMT+0400, GMT+0430, GMT+0500, GMT+0530, GMT+0545, GMT+0600, GMT+0630, GMT+0700, GMT+0800, GMT+0845, GMT+0900, GMT+0930, GMT+1000, GMT+1030, GMT+1100, GMT+1130, GMT+1200, GMT+1245, GMT+1300, GMT+1400, NO, YES
GMT+0800(GMT+0 None 8:00)
Equipment Planning TZ
NO(No)
None
DATE, WEEK, DATEWEEK
DATE(Date mode)
None
JAN, FEB, MAR, APR, MAY, JUN, JUL, AUG, SEP, OCT, NOV, DEC
JAN(January)
None
1~31
None
LAST, FIRST, SECOND, THIRD, FOURTH
FIRST(First)
None
MON, TUE, WED, THU, FRI, SAT, SUN
MON(Monday)
None
00:00:00~23:59:59
00:00:00
None
DATE, WEEK, DATEWEEK
DATE(Date mode)
None
JAN, FEB, MAR, APR, MAY, JUN, JUL, AUG, SEP, OCT, NOV, DEC
JAN(January)
None
1~31
None
LAST, FIRST, SECOND, THIRD, FOURTH
FIRST(First)
None
MON, TUE, WED, THU, FRI, SAT, SUN
MON(Monday)
None
00:00:00~23:59:59
00:00:00
None
-120~120
None
-720~840
None
Engineering Design TZ
2000-01-01~203312-31
None
None
N/A
OmuCurTime
00:00:00~23:59:59
None
None
N/A
OmuCurTime
None
None
None
N/A
OmuCurTime
NTP, GPS, NONE
NTP(NTP)
None
Equipment Planning TimeSrc
0~30 characters
None
None
N/A
TimeSrc
Valid IP address
127.0.0.1
None
Default/Recommen FTPCLTPORT ded Value
21~65535
21
None
Default/Recommen FTPCLTPORT ded Value
0~3
None
None
CnOperatorExtende dQci
10~254
None
None
Engineering Design
0~9
None
Engineering Design
0~9
None
Engineering Design
0~3
None
None
CnOperatorStandar dQci
QCI1, QCI2, QCI3, QCI4, QCI5, QCI6, None QCI7, QCI8, QCI9
None
Engineering Design
0~9
None
Engineering Design
0~9
None
Engineering Design
0~3
None
None
Engineering Design
CSFallBackBlindHo Cfg
UTRAN, GERAN, CDMA2000
UTRAN
UTRAN
Default/Recommen CSFallBackBlindHo ded Value Cfg
GERAN
GERAN
CDMA2000
CDMA2000
OFF, ON
OFF(Off)
OFF(Off)
OFF, ON
OFF(Off)
OFF(Off)
OFF, ON
OFF(Off)
OFF(Off)
0~3
None
None
InterPlmnHoList
000~999
None
None
Radio Planning (Negotiation with the peer)
InterPlmnHoList
00~99,000~999
None
None
InterPlmnHoList
0~255
None
None
Engineering Design
RatFreqPriorityGrou p
LTE, UTRAN, GERAN
None
None
Default/Recommen RatFreqPriorityGrou ded Value p
0~45589,64436~65 None 535
None
0~7
None
GSM_dcs1800
None
Engineering Design
0~3
None
None
ServiceIfHoCfgGrou p
0~9
None
None
Engineering Design
NO_HO, PERMIT_HO
NO_HO
None
Default/Recommen ServiceIfHoCfgGrou ded Value p
0~45589,64436~65 0 535
None
0~3
None
None
ServiceIrHoCfgGro up
0~9
None
None
Engineering Design
ServiceIrHoCfgGro up
NO_HO, PERMIT_HO, MUST_HO
NO_HO
None
Default/Recommen ServiceIrHoCfgGro ded Value up
1~256
None
None
Engineering Design SpidCfg
FALSE, TRUE
FALSE(FALSE)
None
Default/Recommen SpidCfg ded Value
NOT_CFG, CFG
NOT_CFG(NOT_C None FG)
SpidCfg
0~255
None
SpidCfg
FALSE, TRUE
TRUE(TRUE)
None
FALSE, TRUE
TRUE(TRUE)
None
FALSE, TRUE
TRUE(TRUE)
None
FALSE, TRUE
FALSE(FALSE)
None
0,10~600
Default/Recommen CounterCheckPara ded Value
0,128~4294967295 0
Default/Recommen CounterCheckPara ded Value
OFF, ON
OFF(Off)
OFF(Off)
Engineering Design CounterCheckPara
NULL, Snow3G, AES
AES(AES Algorithm)
NULL(NULL Algorithm)
Engineering Design ENodeBCipherCap
NULL, Snow3G, AES
Snow3G(SNOW 3G AES(AES Algorithm) Algorithm)
Engineering Design ENodeBCipherCap
NULL, Snow3G, AES
Snow3G(SNOW 3G Engineering Design ENodeBCipherCap Algorithm)
10~200
20
20
Default/Recommen ENodeBConnState ded Value Timer
10~200
20
20
10~200
35
35
NULL, Snow3G, AES
AES(AES Algorithm)
AES(AES Algorithm)
Engineering Design
ENodeBIntegrityCa p
NULL, Snow3G, AES
Snow3G(SNOW 3G Snow3G(Snow 3G Algorithm) Algorithm)
Engineering Design
ENodeBIntegrityCa p
NULL, Snow3G, AES
Engineering Design
ENodeBIntegrityCa p
OFF, ON
ON(On)
ON(On)
Engineering Design GlobalProcSwitch
X2_OVER_M2000( X2_OVER_M2000( X2_OVER_M2000, X2SonLink is set up X2SonLink is set up Engineering Design GlobalProcSwitch X2_OVER_S1 over M2000) over M2000)
OFF, ON
ON(On)
ON(On)
LCG_PROFILE_0, LCG_PROFILE_1
LCG_PROFILE_0
LCG_PROFILE_0
OFF, ON
OFF(Off)
OFF(Off)
OFF, ON
ON(On)
ON(On)
OFF, ON
OFF(Off)
OFF(Off)
OFF, ON
OFF(Off)
OFF(Off)
Engineering Design PdcpRohcPara
U_MODE, O_MODE, R_MODE
U_MODE(Unidirecti U_MODE(Unidirecti Engineering Design PdcpRohcPara onal Mode) onal Mode)
Profile0x0001, Profile0x0002, Profile0x0003, Profile0x0004
Profile0x0001:on, Profile0x0002:on, Profile0x0003:on, Profile0x0004:on
Profile0x0001: on; Profile0x0002: on; Profile0x0003: on; Profile0x0004: on
Engineering Design PdcpRohcPara
1~16
Default/Recommen RrcConnStateTimer ded Value
min5, min10, min20, min30, min60, min10(10) min120, min180
min10(10)
ms50, ms100, ms150, ms200, ms500, ms1000, ms2000
ms500(500)
ms500(500)
ms100, ms200, ms500, ms1000, ms2000, ms4000, ms8000
ms8000(8000)
ms8000(8000)
min5, min10, min20, min30, min60, min120(120) min120, min180
min120(120)
0~3600
20
20
0~3600
180
180
0~255
None
None
N/A
TceIpMapping
IPv4, IPv6
IPv4(IPv4 Address) None
N/A
TceIpMapping
Valid IP address
0.0.0.0
None
N/A
TceIpMapping
Valid IP address
0:0:0:0:0:0:0:0
None
N/A
TceIpMapping
0~17
None
None
CellDlpcPdschPa
OFF, ON
OFF(Off)
OFF(Off)
Default/Recommen CellDlpcPdschPa ded Value
DB_6_P_A, DB_4DOT77_P_A, DB_3_P_A, DB_1DOT77_P_A, DB_3_P_A(-3 dB) DB0_P_A, DB1_P_A, DB2_P_A, DB3_P_A
Dual-antenna or four-antenna: DB_3_P_A(-3 dB) Single-antenna: DB0_P_A(0 dB)
Default/Recommen CellDlpcPdschPa ded Value
0~17
None
None
CellDrxPara
0~999
300
300
Default/Recommen CellDrxPara ded Value
1~1000
800
800
0~1999
300
300
1~2000
800
800
0~1999
300
300
1~2000
800
800
40~6000, step:20
30
30
0~17
None
None
CellUlpcDedic
UU_DISABLE, UU_ENABLE
UU_DISABLE(Disa UU_DISABLE(Disa Default/Recommen CellUlpcDedic ble) ble) ded Value
-10.5~12, step:1.5
-30
-30
Default/Recommen CellUlpcDedic ded Value
-3~12
-30
-30
Default/Recommen CellUlpcDedic ded Value
UU_FC0_FILTER_ COEFF, UU_FC1_FILTER_ COEFF, UU_FC2_FILTER_ COEFF, UU_FC3_FILTER_ COEFF, UU_FC4_FILTER_ COEFF, UU_FC5_FILTER_ COEFF, UU_FC6_FILTER_ COEFF, UU_FC6_FILTER_ UU_FC6_FILTER_ UU_FC7_FILTER_ Default/Recommen COEFF(UU_FC6_F COEFF(UU_FC6_F CellUlpcDedic COEFF, ded Value ILTER_COEFF) ILTER_COEFF) UU_FC8_FILTER_ COEFF, UU_FC9_FILTER_ COEFF, UU_FC11_FILTER_ COEFF, UU_FC13_FILTER_ COEFF, UU_FC15_FILTER_ COEFF, UU_FC17_FILTER_ COEFF, UU_FC19_FILTER_ COEFF
0~17
None
None
Engineering Design DistBasedHO
EUTRAN:On, EUTRAN, GERAN, GERAN:Off, UTRAN UTRAN:Off
EUTRAN:On, GERAN:Off, UTRAN:Off
100~100000
10
10
0~17
None
None
DrxParaGroup
0~9
None
None
Engineering Design DrxParaGroup
OFF, ON
OFF(Off)
QCI 1: ON(On) QCI 2: OFF(Off) QCI 3: OFF(Off) QCI 4: ON(On) QCI 5: OFF(Off) QCI 6: ON(On) QCI 7: OFF(Off) QCI 8: ON(On) QCI 9: ON(On)
QCI 1-FDD: PSF10(10 subframes) QCI 1-TDDConfiguration 0: PSF4(4 subframes) QCI 1-TDDConfiguration 1: PSF6(6 subframes) QCI 1-TDDConfiguration 2: PSF8(8 subframes) QCI 1-TDDConfiguration 3: PSF1, PSF2, PSF3, PSF6(6 subframes) PSF4, PSF5, PSF6, QCI 1-TDDPSF8, PSF10, Configuration 4: PSF20, PSF30, PSF2(2 subframes) Engineering Design DrxParaGroup PSF8(8 subframes) PSF40, PSF50, QCI 1-TDDPSF60, PSF80, Configuration 5: PSF100, PSF200 PSF8(8 subframes) QCI 1-TDDConfiguration 6: PSF5(5 subframes) QCI 4-FDD: PSF2(2 subframes) QCI 4-TDDConfiguration 0: PSF2(2 subframes) QCI 4-TDDConfiguration 1: PSF2(2 subframes) QCI 4-TDDConfiguration 2:
PSF1, PSF2, PSF3, PSF4, PSF5, PSF6, PSF8, PSF10, PSF20, PSF30, PSF40, PSF50, PSF60, PSF80, PSF100, PSF200, PSF300, PSF500, PSF750, PSF1280, PSF1920, PSF2560
QCI 1-FDD: PSF3(3 subframes) QCI 1-TDDConfiguration 0: PSF3(3 subframes) QCI 1-TDDConfiguration 1: PSF3(3 subframes) QCI 1-TDDConfiguration 2: PSF5(5 subframes) QCI 1-TDDConfiguration 3: PSF6(6 subframes) QCI 1-TDDConfiguration 4: PSF8(8 subframes) PSF3(3 subframes) Engineering Design DrxParaGroup QCI 1-TDDConfiguration 5: PSF10(10 subframes) QCI 1-TDDConfiguration 6: PSF3(3 subframes) QCI 4-FDD: PSF4(4 subframes) QCI 4-TDDConfiguration 0: PSF4(4 subframes) QCI 4-TDDConfiguration 1: PSF4(4 subframes) QCI 4-TDDConfiguration 2:
sf1, sf2, sf4, sf6, sf8(8 subframes) sf8, sf16, sf24, sf33
QCI 1: sf8(8 subframes) QCI 4: sf8(8 subframes) QCI 6: sf8(8 subframes) QCI 8: sf8(8 subframes) QCI 9: sf8(8 subframes)
SF10, SF20, SF32, SF40, SF64, SF80, SF128, SF160, SF40(40 SF256, SF320, subframes) SF512, SF640, SF1024, SF1280, SF2048, SF2560
QCI 1: SF20(20 subframes) QCI 4: SF20(20 subframes) QCI 6: SF40(40 subframes) QCI 8: SF40(40 subframes) QCI 9: SF40(40 subframes)
QCI 1: UU_DISABLE(Disa ble) QCI 4: UU_ENABLE(Enabl e) QCI 6: UU_ENABLE(Enabl UU_ENABLE(Enabl Engineering Design DrxParaGroup e) e) QCI 8: UU_ENABLE(Enabl e) QCI 9: UU_ENABLE(Enabl e)
SF2, SF5, SF8, SF10, SF16, SF20, SF32, SF40, SF64, SF80, SF128, SF5(5 subframes) SF160, SF256, SF320, SF512, SF640
QCI 4: SF5(5 subframes) QCI 6: SF5(5 subframes) QCI 8: SF5(5 subframes) QCI 9: SF5(5 subframes)
1~16
QCI 4: 2 QCI 6: 8 QCI 8: 8 QCI 9: 8
0~17
None
None
Engineering Design
InterRatHoCommGr oup
0~9
None
None
Engineering Design
InterRatHoCommGr oup
0~15, step:0.5
None
Default/Recommen InterRatHoCommGr ded Value oup
640ms
None
-141~-43
-111
None
-20~-3, step:0.5
-20
None
-141~-43
-115
None
-20~-3, step:0.5
-24
None
0~15
None
0~17
None
None
Engineering Design
InterRatHoCdma1x RttGroup
0~9
None
None
Engineering Design
InterRatHoCdma1x RttGroup
0~15, step:0.5
Default/Recommen InterRatHoCdma1x ded Value RttGroup
-31.5~0, step:0.5
-28
-28
640ms
640ms
-31.5~0, step:0.5
-24
-24
10~254
None
None
Engineering Design CellExtendedQci
0~17
None
None
0~9
None
Default/Recommen CellExtendedQci ded Value
0~9
None
0~9
None
0~9
None
0~9
None
0~9
None
0~9
None
0~9
None
0~17
None
None
CellStandardQci
None
Engineering Design CellStandardQci
0~9
None
0~9
None
0~9
None
0~9
None
0~9
None
0~9
None
0~9
None
0~9
None
ms5, ms10, ms20, ms40, ms80
ms10(SRI 10ms)
ms10(SRI 10ms)
0~17
None
None
Engineering Design
InterRatHoCdmaHr pdGroup
0~9
None
None
Engineering Design
InterRatHoCdmaHr pdGroup
0~15, step:0.5
Default/Recommen InterRatHoCdmaHr ded Value pdGroup
-31.5~0, step:0.5
-14
-14
640ms
640ms
-31.5~0, step:0.5
-10
-10
0~17
None
None
Engineering Design
InterRatHoGeranGr oup
0~9
None
None
Engineering Design
InterRatHoGeranGr oup
0~15, step:0.5
None
Default/Recommen InterRatHoGeranGr ded Value oup
-110~-48
-100
None
640ms
640ms
-110~-48
-98
None
0~17
None
None
Engineering Design
InterRatHoUtranGro up
0~9
None
None
Engineering Design
InterRatHoUtranGro up
-24~0, step:0.5
-20
None
Default/Recommen InterRatHoUtranGro ded Value up
-120~-25
-103
None
0~15, step:0.5
None
640ms
None
-24~0, step:0.5
-18
None
-120~-25
-101
None
0~17
None
None
Engineering Design InterFreqHoGroup
0~9
None
None
Engineering Design InterFreqHoGroup
0~15, step:0.5
Default/Recommen InterFreqHoGroup ded Value
640ms
None
-141~-43
-105
None
-20~-3, step:0.5
-20
None
-141~-43
-109
None
-20~-3, step:0.5
-24
None
0~15, step:0.5
-141~-43
-105
None
-20~-3, step:0.5
-20
None
640ms
None
-141~-43
-103
-103
-20~-3, step:0.5
-18
-18
-141~-43
-85
-85
-20~-3, step:0.5
-16
-16
-15~15, step:0.5
-141~-44
-95
-95
-141~-44
-99
-99
-140~-43
-87
-87
-20~-3, step:0.5
-20
-20
0~17
None
None
Engineering Design IntraFreqHoGroup
0~9
None
None
Engineering Design IntraFreqHoGroup
0~15, step:0.5
Default/Recommen IntraFreqHoGroup ded Value
-15~15, step:0.5
320ms
320ms
0~3
None
None
CnOperator
1~32 characters
None
None
N/A
CnOperator
CNOPERATOR_P RIMARY, None CNOPERATOR_SE CONDARY
None
CnOperator
000~999
None
None
CnOperator
00~99,000~999
None
None
CnOperator
0~65535
None
None
CnOperatorIpPath
0~3
None
None
CnOperatorIpPath
0~65535
None
None
CnOperatorTa
0~3
None
None
CnOperatorTa
0~65535
None
None
CnOperatorTa
0~3
None
None
Emc
OFF, ON
OFF(Off)
None
Engineering Design Emc
OFF, ON
OFF(Off)
None
1~15
1~15
INDEPENDENT, INDEPENDENT(Ind SHARED_FREQ, ependent Operator None SEPARATED_FRE Mode) Q
ENodeBSharingMo de
0~3
None
None
LicenseSharingPoli cy
1~100
None
None
Engineering Design
LicenseSharingPoli cy
1~300
None
Engineering Design S1ReestTimer
1~300
300
None
Engineering Design S1ReestTimer
0~15
None
None
S1Interface
0~79
None
None
S1Interface
0~3
None
None
S1Interface
Release_R8, Release_R9, Release_R10
Release_R8(Releas None e 8)
S1Interface
FALSE, TRUE
FALSE(FALSE)
None
N/A
S1Interface
Normal, Abnormal Normal, Abnormal, Blocked FALSE, TRUE, NULL
None
None
N/A
S1Interface
None
None
N/A
S1Interface
None
None
N/A
S1Interface
0~3600
None
None
N/A
S1Interface
0~150 characters
None
None
N/A
S1Interface
0~224 characters
None
None
N/A
S1Interface
0~300 characters
None
None
N/A
S1Interface
0~255
None
None
N/A
S1Interface
Null, LowerLinkFault, MmecImpact, SetupFail, CfgErr, LicRestrict, PlmnDiff, TacNotCfg, Undefine
None
None
N/A
S1Interface
0~15
None
None
MmeFeatureCfg
DISABLE, ENABLE DISABLE(disable)
None
Engineering Design MmeFeatureCfg
000~999
None
None
Engineering Design X2BlackWhiteList
00~99,000~999
None
None
0~1048575
None
None
X2_BLACK_LIST_T YPE, X2_BLACK_LIST_T None X2_WHITE_LIST_T YPE YPE
X2BlackWhiteList
16~79
None
None
X2Interface
0~79
None
None
X2Interface
0~3
None
None
X2Interface
Release_R10(Relea None se 10)
X2Interface
FORBID_AUTO_R FORBID_AUTO_R FORBID_AUTO_R MV, Radio Planning MV(Forbid Auto MV(Forbid Auto PERMIT_AUTO_R (Internal planning) Remove) Remove) MV
X2Interface
0~50 characters
None
None
N/A
X2Interface
0~50 characters
None
None
N/A
X2Interface
Normal, Abnormal
None
None
N/A
X2Interface
SCTP_LINK_FAUL T, SETUP_FAILURE_ OCCUR, PEERIN_BLACK_LI None ST, STATE_NORMAL, SETUP_ONLY_ON E_LINK_ALLOWED
None
N/A
X2Interface
OFF, ON
OFF(Off)
OFF(Off)
Engineering Design Drx
OFF, ON
ON(On)
ON(On)
Default/Recommen Drx ded Value
SF10, SF20, SF32, SF40, SF64, SF80, SF128, SF160, SF10(10 SF256, SF320, subframes) SF512, SF640, SF1024, SF1280, SF2048, SF2560
SF10(10 subframes)
PSF1, PSF2, PSF3, PSF4, PSF5, PSF6, PSF8, PSF10, Default/Recommen PSF20, PSF30, PSF4(4 subframes) PSF4(4 subframes) Drx ded Value PSF40, PSF50, PSF60, PSF80, PSF100, PSF200
PSF1, PSF2, PSF3, PSF4, PSF5, PSF6, PSF8, PSF10, PSF20, PSF30, PSF40, PSF50, PSF60, PSF80, PSF100, PSF200, PSF300, PSF500, PSF750, PSF1280, PSF1920, PSF2560
PSF5(5 subframes) for FDD PSF3(3 subframes) for TDD in subframe configuration 0 PSF3(3 subframes) for TDD in subframe configuration 1 PSF4(4 subframes) for TDD in subframe configuration 2 PSF3(3 subframes) Default/Recommen PSF5(5 subframes) Drx for TDD in ded Value subframe configuration 3 PSF4(4 subframes) for TDD in subframe configuration 4 PSF4(4 subframes) for TDD in subframe configuration 5 PSF3(3 subframes) for TDD in subframe configuration 6
UU_DISABLE(Disa UU_DISABLE(Disa Default/Recommen Drx ble) ble) ded Value
SF2, SF5, SF8, SF10, SF16, SF20, SF32, SF40, SF64, SF10(10 SF80, SF128, subframes) SF160, SF256, SF320, SF512, SF640
SF10(10 subframes)
1~16
SF128, SF160, SF256, SF320, SF512, SF640, SF1024, SF1280, SF2048, SF2560
SF320(320 subframes)
SF128, SF160, SF256, SF320, SF512, SF640, SF1024, SF1280, SF2048, SF2560
10~254
None
None
Engineering Design ExtendedQci
IMS signaling: IMSSignalling(IMS Signalling) Low-delay service: IMSSignalling, LowDelay(Low TCPorBuffStreamin LowDelay, Delay) g(TCP Based or Engineering Design ExtendedQci TCPorBuffStreamin TCP service or nonBuffered Streaming) g real-time streaming service: TCPorBuffStreamin g(TCP Based or Buffered Streaming)
0.001~1, step:0.001 700
IMS signaling: 1000 Low-delay service: 900 Engineering Design ExtendedQci TCP service or nonreal-time streaming service: 700 IMS signaling: 1000 Low-delay service: 900 Engineering Design ExtendedQci TCP service or nonreal-time streaming service: 700
0.001~1, step:0.001 700
MinGbrRate_0_KB, MinGbrRate_1_KB, MinGbrRate_2_KB, MinGbrRate_4KB, MinGbrRate_8_KB, MinGbrRate_16_KB , MinGbrRate_32_KB MinGbrRate_1_KB( MinGbrRate_1_KB( , Engineering Design ExtendedQci 1KB/s) 1KB/s) MinGbrRate_64_KB , MinGbrRate_128_K B, MinGbrRate_256_K B, MinGbrRate_512_K B
MinGbrRate_0_KB, MinGbrRate_1_KB, MinGbrRate_2_KB, MinGbrRate_4KB, MinGbrRate_8_KB, MinGbrRate_16_KB , MinGbrRate_32_KB MinGbrRate_1_KB( MinGbrRate_1_KB( , Engineering Design ExtendedQci 1KB/s) 1KB/s) MinGbrRate_64_KB , MinGbrRate_128_K B, MinGbrRate_256_K B, MinGbrRate_512_K B
0~1, step:0.1
10
10
0~39
None
PBR_0_KBps, PBR_8_KBps, PBR_16_KBps, PBR_32_KBps, PBR_64_KBps, PBR_128_KBps, PBR_256_KBps, PBR_INFINITY
PBR_8_KBps(8KB/ PBR_8_KBps(8KB/ Engineering Design ExtendedQci s) s)
9~16
11
11
0~39
None
PAID_USER, FREE_USER
PAID_USER(Paid User)
PAID_USER(Paid User)
FLOW_CTRL, FLOW_CTRL(Flow None NON_FLOW_CTRL Control)
0~39
None
None
Engineering Design
InterRatPolicyCfgGr oup
PS_HO, SRVCC, REDIRECTION
PS_HO:On, SRVCC:Off, None REDIRECTION:Off
Default/Recommen InterRatPolicyCfgGr ded Value oup
SRVCC
SRVCC:On
None
PS_HO:On, PS_HO, NACC_HO:Off, NACC_HO, CCO_HO:Off, None CCO_HO, SRVCC, SRVCC:Off, REDIRECTION REDIRECTION:Off
SRVCC
CDMA1XRTTHoSwi None tch:On
OPT_HO, NON_OPT_HO
OPT_HO:On, None NON_OPT_HO:Off
PERMIT_HO_ENU M, PERMIT_HO_ENU None FORBID_HO_ENU M(Permit Ho) M
PERMIT_FAST_AN R_MEAS_ENUM, PERMIT_FAST_AN None FORBID_FAST_AN R_MEAS_ENUM R_MEAS_ENUM
0~15
12
None
Default/Recommen PuschParam ded Value
0~15
None
0~15
None
0~39
None
None
Engineering Design RlcPdcpParaGroup
DiscardTimer_50, DiscardTimer_100, DiscardTimer_150, DiscardTimer_300, DiscardTimer_1500 DiscardTimer_500, None (1500 ms) DiscardTimer_750, DiscardTimer_1500, DiscardTimer_Infinit y
Default/Recommen RlcPdcpParaGroup ded Value
RlcMode_AM, RlcMode_UM
RlcMode_AM(Ackn None owledge Mode)
Maxretx_Threshold _t1, Maxretx_Threshold _t2, Maxretx_Threshold _t3, Maxretx_Threshold _t4, Maxretx_Threshold None Maxretx_Threshold _t8(8) _t6, Maxretx_Threshold _t8, Maxretx_Threshold _t16, Maxretx_Threshold _t32
Maxretx_Threshold _t1, Maxretx_Threshold _t2, Maxretx_Threshold _t3, Maxretx_Threshold _t4, Maxretx_Threshold None Maxretx_Threshold _t8(8) _t6, Maxretx_Threshold _t8, Maxretx_Threshold _t16, Maxretx_Threshold _t32
PollByte_kb25, PollByte_kb50, PollByte_kb75, PollByte_kb100, PollByte_kb125, PollByte_kb250, PollByte_kb375, PollByte_kb500, PollByte_kb750, PollByte_kb1000, PollByte_kb1250, PollByte_kb1500, PollByte_kb2000, PollByte_kb3000, PollByte_infinity
PollByte_kb25(25 kBytes)
None
PollByte_kb25, PollByte_kb50, PollByte_kb75, PollByte_kb100, PollByte_kb125, PollByte_kb250, PollByte_kb375, PollByte_kb500, PollByte_kb750, PollByte_kb1000, PollByte_kb1250, PollByte_kb1500, PollByte_kb2000, PollByte_kb3000, PollByte_infinity
PollByte_kb25(25 kBytes)
None
PollPdu_p4, PollPdu_p8, PollPdu_p16, PollPdu_p32, PollPdu_p64, PollPdu_p128, PollPdu_p256, PollPdu_Infinity
PollPdu_p32(32 PDUs)
None
PollPdu_p4, PollPdu_p8, PollPdu_p16, PollPdu_p32, PollPdu_p64, PollPdu_p128, PollPdu_p256, PollPdu_Infinity
PollPdu_p32(32 PDUs)
None
Tpollretrans_m5, Tpollretrans_m10, Tpollretrans_m15, Tpollretrans_m20, Tpollretrans_m25, Tpollretrans_m30, Tpollretrans_m35, Tpollretrans_m40, Tpollretrans_m45, Tpollretrans_m50, Tpollretrans_m55, Tpollretrans_m60, Tpollretrans_m65, Tpollretrans_m70, Tpollretrans_m75, Tpollretrans_m80, Tpollretrans_m85, Tpollretrans_m40(4 None Tpollretrans_m90, 0ms) Tpollretrans_m95, Tpollretrans_m100, Tpollretrans_m105, Tpollretrans_m110, Tpollretrans_m115, Tpollretrans_m120, Tpollretrans_m125, Tpollretrans_m130, Tpollretrans_m135, Tpollretrans_m140, Tpollretrans_m145, Tpollretrans_m150, Tpollretrans_m155, Tpollretrans_m160, Tpollretrans_m165, Tpollretrans_m170,
Tpollretrans_m5, Tpollretrans_m10, Tpollretrans_m15, Tpollretrans_m20, Tpollretrans_m25, Tpollretrans_m30, Tpollretrans_m35, Tpollretrans_m40, Tpollretrans_m45, Tpollretrans_m50, Tpollretrans_m55, Tpollretrans_m60, Tpollretrans_m65, Tpollretrans_m70, Tpollretrans_m75, Tpollretrans_m80, Tpollretrans_m85, Tpollretrans_m50(5 None Tpollretrans_m90, 0ms) Tpollretrans_m95, Tpollretrans_m100, Tpollretrans_m105, Tpollretrans_m110, Tpollretrans_m115, Tpollretrans_m120, Tpollretrans_m125, Tpollretrans_m130, Tpollretrans_m135, Tpollretrans_m140, Tpollretrans_m145, Tpollretrans_m150, Tpollretrans_m155, Tpollretrans_m160, Tpollretrans_m165, Tpollretrans_m170,
Tstatprohibit_m0, Tstatprohibit_m5, Tstatprohibit_m10, Tstatprohibit_m15, Tstatprohibit_m20, Tstatprohibit_m25, Tstatprohibit_m30, Tstatprohibit_m35, Tstatprohibit_m40, Tstatprohibit_m45, Tstatprohibit_m50, Tstatprohibit_m55, Tstatprohibit_m60, Tstatprohibit_m65, Tstatprohibit_m70, Tstatprohibit_m75, Tstatprohibit_m80, Tstatprohibit_m50(5 None Tstatprohibit_m85, 0ms) Tstatprohibit_m90, Tstatprohibit_m95, Tstatprohibit_m100, Tstatprohibit_m105, Tstatprohibit_m110, Tstatprohibit_m115, Tstatprohibit_m120, Tstatprohibit_m125, Tstatprohibit_m130, Tstatprohibit_m135, Tstatprohibit_m140, Tstatprohibit_m145, Tstatprohibit_m150, Tstatprohibit_m155, Tstatprohibit_m160, Tstatprohibit_m165,
Tstatprohibit_m0, Tstatprohibit_m5, Tstatprohibit_m10, Tstatprohibit_m15, Tstatprohibit_m20, Tstatprohibit_m25, Tstatprohibit_m30, Tstatprohibit_m35, Tstatprohibit_m40, Tstatprohibit_m45, Tstatprohibit_m50, Tstatprohibit_m55, Tstatprohibit_m60, Tstatprohibit_m65, Tstatprohibit_m70, Tstatprohibit_m75, Tstatprohibit_m80, Tstatprohibit_m40(4 None Tstatprohibit_m85, 0ms) Tstatprohibit_m90, Tstatprohibit_m95, Tstatprohibit_m100, Tstatprohibit_m105, Tstatprohibit_m110, Tstatprohibit_m115, Tstatprohibit_m120, Tstatprohibit_m125, Tstatprohibit_m130, Tstatprohibit_m135, Tstatprohibit_m140, Tstatprohibit_m145, Tstatprohibit_m150, Tstatprohibit_m155, Tstatprohibit_m160, Tstatprohibit_m165,
Treordering_m0, Treordering_m5, Treordering_m10, Treordering_m15, Treordering_m20, Treordering_m25, Treordering_m30, Treordering_m35, Treordering_m40, Treordering_m45, Treordering_m50, Treordering_m55, Treordering_m60, Treordering_m65, Treordering_m70, Treordering_m50(5 Treordering_m75, None 0ms) Treordering_m80, Treordering_m85, Treordering_m90, Treordering_m95, Treordering_m100, Treordering_m110, Treordering_m120, Treordering_m130, Treordering_m140, Treordering_m150, Treordering_m160, Treordering_m170, Treordering_m180, Treordering_m190, Treordering_m200
PdcpSnsize_7bits, PdcpSnsize_12bits( None PdcpSnsize_12bits 12 bits)
RlcSnSize_size5, RlcSnSize_size10
RlcSnSize_size10(1 None 0bits)
RlcSnSize_size5, RlcSnSize_size10
RlcSnSize_size10(1 None 0bits)
FALSE, TRUE
TRUE(TRUE)
TRUE(TRUE)
None
Engineering Design StandardQci
0.001~1, step:0.001 700
QCI6: 1000 QCI7: 900 QCI8: 800 QCI9: 700
0.001~1, step:0.001 700
QCI6: 1000 QCI7: 900 QCI8: 800 QCI9: 700
MinGbrRate_0_KB, MinGbrRate_1_KB, MinGbrRate_2_KB, MinGbrRate_4KB, MinGbrRate_8_KB, MinGbrRate_16_KB , MinGbrRate_32_KB MinGbrRate_1_KB( MinGbrRate_1_KB( , Engineering Design StandardQci 1KB/s) 1KB/s) MinGbrRate_64_KB , MinGbrRate_128_K B, MinGbrRate_256_K B, MinGbrRate_512_K B
MinGbrRate_0_KB, MinGbrRate_1_KB, MinGbrRate_2_KB, MinGbrRate_4KB, MinGbrRate_8_KB, MinGbrRate_16_KB , MinGbrRate_32_KB MinGbrRate_1_KB( MinGbrRate_1_KB( , Engineering Design StandardQci 1KB/s) 1KB/s) MinGbrRate_64_KB , MinGbrRate_128_K B, MinGbrRate_256_K B, MinGbrRate_512_K B
0~1, step:0.1
10
10
0~39
None
0~39
None
PBR_0_KBps, PBR_8_KBps, PBR_16_KBps, PBR_32_KBps, PBR_64_KBps, PBR_128_KBps, PBR_256_KBps, PBR_INFINITY
PBR_8_KBps(8KB/ PBR_8_KBps(8KB/ Engineering Design StandardQci s) s)
9~16
11
QCI 6: 9 QCI 7: 10 QCI 8: 11 QCI 9: 12
FLOW_CTRL, FLOW_CTRL(Flow None NON_FLOW_CTRL Control)
CLASS_0, CLASS_1, CLASS_2
CLASS_1(CLASS_ CLASS_1(CLASS_ Default/Recommen AlgoDefaultPara 1) 1) ded Value
NO_ADAPTIVE, TxD_BF_ADAPTIV MIMO_BF_ADAPTI MIMO_BF_ADAPTI BfMimoAdaptivePar E, VE(MIMO_BF_ADA VE(MIMO_BF_ADA Engineering Design aCfg MIMO_BF_ADAPTI PTIVE) PTIVE) VE
TM2, TM3, TM7, TM8, TM4
TM3(TM3)
TM3(TM3)
Engineering Design
BfMimoAdaptivePar aCfg
OFF, ON
ON(On)
ON(On)
Engineering Design CqiAdaptiveCfg
ms2, ms5, ms10, ms20, ms32, ms40, ms40(40ms) ms64, ms80, ms128, ms160
ms40(40ms)
Engineering Design CqiAdaptiveCfg
NO_ADAPTIVE, OL_ADAPTIVE, CL_ADAPTIVE, OC_ADAPTIVE
OL_ADAPTIVE(OL OL_ADAPTIVE(OL MimoAdaptivePara Engineering Design _ADAPTIVE) _ADAPTIVE) Cfg
TM2, TM3, TM4, TM6
TM3(TM3)
TM3(TM3)
Engineering Design
MimoAdaptivePara Cfg
OFF, ON
ON(On)
ON(On)
Engineering Design SrsAdaptiveCfg
ms5, ms10, ms20, ms40
ms40(40ms)
ms40(40ms)
Engineering Design SrsAdaptiveCfg
None
Engineering Design TypDrbBsr
TPeriodBSRTimer_ sf5, TPeriodBSRTimer_ sf10, TPeriodBSRTimer_ sf16, TPeriodBSRTimer_ sf20, TPeriodBSRTimer_ sf32, TPeriodBSRTimer_ sf40, TPeriodBSRTimer_ sf64, TPeriodBSRTimer_ TPeriodBSRTimer_ None sf80, sf10(10 subframes) TPeriodBSRTimer_ sf128, TPeriodBSRTimer_ sf160, TPeriodBSRTimer_ sf320, TPeriodBSRTimer_ sf640, TPeriodBSRTimer_ sf1280, TPeriodBSRTimer_ sf2560, TPeriodBSRTimer_i nfinity
Default/Recommen TypDrbBsr ded Value
sf320, sf640, sf1280, sf2560, sf5120, sf10240
sf320(sf320)
None
Default/Recommen TypDrbBsr ded Value
GAP_PATTERN_T YPE_1, GAP_PATTERN_T GAP_PATTERN_T Default/Recommen HoMeasComm GAP_PATTERN_T YPE_1 YPE_1 ded Value YPE_2
FC0, FC1, FC2, FC3, FC4, FC5, FC6, FC7, FC8, FC6 FC9, FC11, FC13, FC15, FC17, FC19
FC6
Default/Recommen HoMeasComm ded Value
FC6
FC6
NOT_CFG, CFG
NOT_CFG
NOT_CFG
-141~-43
-44
-44
NOT_CFG, CFG
NOT_CFG
NOT_CFG
T_CRMAX_30S, T_CRMAX_60S, T_CRMAX_120S, T_CRMAX_180S, T_CRMAX_240S
T_CRMAX_60S(60 T_CRMAX_60S(60 Default/Recommen HoMeasComm s) s) ded Value
T_CRMAXHYST_3 0S, T_CRMAXHYST_6 0S, T_CRMAXHYST_1 T_CRMAXHYST_6 T_CRMAXHYST_6 Default/Recommen HoMeasComm 20S, 0S(60s) 0S(60s) ded Value T_CRMAXHYST_1 80S, T_CRMAXHYST_2 40S
1~16
1~16
TTT_SF_MEDIUM_ 0DOT25, TTT_SF_MEDIUM_ 0DOT50, TTT_SF_MEDIUM_ TTT_SF_MEDIUM_ Default/Recommen HoMeasComm TTT_SF_MEDIUM_ LDOT0(1) LDOT0(1) ded Value 0DOT75, TTT_SF_MEDIUM_ LDOT0
TTT_SF_HIGH_0D OT25, TTT_SF_HIGH_0D OT50, TTT_SF_HIGH_0D TTT_SF_HIGH_0D Default/Recommen HoMeasComm TTT_SF_HIGH_0D OT75(0.75) OT75(0.75) ded Value OT75, TTT_SF_HIGH_LD OT0
FC6
FC6
1~8
Default/Recommen InterRatHoComm ded Value
r1, r2, r4, r8, r16, r32, r64, Infinity
Infinity(Infinity)
infinity(Infinity)
120ms, 240ms, 480ms, 640ms, 1024ms, 2048ms, 480ms 5120ms, 10240ms, 1min, 6min, 12min, 30min, 60min
480ms
UTRAN_RSCP, UTRAN_ECN0, UTRAN_BOTH
UTRAN_RSCP
UTRAN_RSCP
480ms
PILOT_STRENGTH , Default/Recommen PILOT_STRENGTH PILOT_STRENGTH InterRatHoComm PILOT_PN_PHASE ded Value _AND_STRENGTH
480ms
PILOT_STRENGTH PILOT_STRENGTH PILOT_STRENGTH
480ms
Engineering Design InterRatHoComm
RSRP, RSRQ, BOTH
RSRP
RSRP
EventB1, EventB2
EventB1(EventB1)
EventB1(EventB1)
1~8
Default/Recommen IntraRatHoComm ded Value
Infinity(Infinity)
infinity(Infinity)
RSRP, RSRQ
RSRP
RSRP
SAME_AS_TRIG_ QUAN, BOTH
SAME_AS_TRIG_ QUAN(Same as Trig Quan)
240ms
240ms
RSRP, RSRQ, BOTH
RSRP
RSRP
RSRP, RSRQ, BOTH
RSRP
RSRP
RSRP, RSRQ, BOTH
RSRP
RSRP
0~17
None
None
CSFallBackHo
40ms
40ms
CSFallBackHo
40ms
40ms
CSFallBackHo
40ms
40ms
CSFallBackHo
-120~-25
-106
-106
CSFallBackHo
-24~0, step:0.5
-13
-13
CSFallBackHo
-110~-48
-103
-103
CSFallBackHo
-31.5~0, step:0.5
-34
-34
Default/Recommen CSFallBackHo ded Value
0~17
None
None
CellAcBar
NOT_CFG, CFG
NOT_CFG(Not configure)
Engineering Design CellAcBar
BOOLEAN_FALSE, BOOLEAN_FALSE( BOOLEAN_FALSE( Engineering Design CellAcBar BOOLEAN_TRUE False) False)
NOT_CFG, CFG
P00, P05, P10, P15, P20, P25, P30, P40, P50, P95(95%) P60, P70, P75, P80, P85, P90, P95
P95(95%)
Default/Recommen CellAcBar ded Value
ACCESS_BARRIN G_TIME_S4, ACCESS_BARRIN G_TIME_S8, ACCESS_BARRIN G_TIME_S16, ACCESS_BARRIN G_TIME_S32, ACCESS_BARRIN ACCESS_BARRIN Default/Recommen CellAcBar ACCESS_BARRIN G_TIME_S4(4s) G_TIME_S4(4s) ded Value G_TIME_S64, ACCESS_BARRIN G_TIME_S128, ACCESS_BARRIN G_TIME_S256, ACCESS_BARRIN G_TIME_S512
BOOLEAN_FALSE, BOOLEAN_FALSE( BOOLEAN_FALSE( Default/Recommen CellAcBar BOOLEAN_TRUE False) False) ded Value
NOT_CFG, CFG
P00, P05, P10, P15, P20, P25, P30, P40, P50, P95(95%) P60, P70, P75, P80, P85, P90, P95
P95(95%)
Default/Recommen CellAcBar ded Value
ACCESS_BARRIN G_TIME_S4, ACCESS_BARRIN G_TIME_S8, ACCESS_BARRIN G_TIME_S16, ACCESS_BARRIN G_TIME_S32, ACCESS_BARRIN ACCESS_BARRIN Default/Recommen CellAcBar ACCESS_BARRIN G_TIME_S4(4s) G_TIME_S4(4s) ded Value G_TIME_S64, ACCESS_BARRIN G_TIME_S128, ACCESS_BARRIN G_TIME_S256, ACCESS_BARRIN G_TIME_S512
0~17
None
None
CellAccess
CELL_BARRED, CELL_NOT_BARR CELL_NOT_BARR Default/Recommen CELL_NOT_BARR CellAccess ED(Not Barred) ED(Not Barred) ded Value ED
CELL_RESERVED, CELL_NOT_RESE CELL_NOT_RESE Default/Recommen CELL_NOT_RESE RVED(Not RVED(Not CellAccess ded Value RVED Reserved) Reserved)
ALLOWED, NOT_ALLOWED
ALLOWED
ALLOWED
Default/Recommen CellAccess ded Value
NORMAL_MODE, RR_MODE
NORMAL_MODE(N NORMAL_MODE(N Default/Recommen CellAccess ormal mode) ormal mode) ded Value
1~720
Default/Recommen CellAccess ded Value
0~17
None
None
CellOp
0~65535
None
None
CellOp
CELL_RESERVED CELL_NOT_RESE CELL_NOT_RESE _FOR_OP, Default/Recommen RVED_FOR_OP(N RVED_FOR_OP(N CellOp CELL_NOT_RESE ded Value ot Reserved) ot Reserved) RVED_FOR_OP
1~100
25
25
Default/Recommen CellOp ded Value
1~100
25
25
Default/Recommen CellOp ded Value
0~3
None
None
N/A
CellOp
0~17
None
None
CellResel
DB0_Q_HYST, DB1_Q_HYST, DB2_Q_HYST, DB3_Q_HYST, DB4_Q_HYST, DB5_Q_HYST, DB6_Q_HYST, DB8_Q_HYST, DB10_Q_HYST, DB12_Q_HYST, DB14_Q_HYST, DB16_Q_HYST, DB18_Q_HYST, DB20_Q_HYST, DB22_Q_HYST, DB24_Q_HYST
DB4_Q_HYST(4dB) DB4_Q_HYST(4dB)
Default/Recommen CellResel ded Value
NOT_CFG, CFG
CFG(Configure)
CFG(Configure)
Engineering Design CellResel
S30_T_EVALULATI ON, S60_T_EVALULATI ON, S120_T_EVALULA S60_T_EVALULATI S60_T_EVALULATI Default/Recommen CellResel TION, ON(60s) ON(60s) ded Value S180_T_EVALULA TION, S240_T_EVALULA TION
S30_T_HYST_NOR MAL, S60_T_HYST_NOR MAL, S120_T_HYST_NO S30_T_HYST_NOR S30_T_HYST_NOR Default/Recommen CellResel RMAL, MAL(30s) MAL(30s) ded Value S180_T_HYST_NO RMAL, S240_T_HYST_NO RMAL
1~16
1~16
DB_6_Q_HYST_SF _MEDIUM, DB_4_Q_HYST_SF _MEDIUM, DB0_Q_HYST_SF_ DB0_Q_HYST_SF_ Default/Recommen CellResel DB_2_Q_HYST_SF MEDIUM(0dB) MEDIUM(0dB) ded Value _MEDIUM, DB0_Q_HYST_SF_ MEDIUM
DB_6_Q_HYST_SF _HIGH, DB_4_Q_HYST_SF _HIGH, DB0_Q_HYST_SF_ DB0_Q_HYST_SF_ Default/Recommen CellResel DB_2_Q_HYST_SF HIGH(0dB) HIGH(0dB) ded Value _HIGH, DB0_Q_HYST_SF_ HIGH
NOT_CFG, CFG
CFG(Configure)
CFG(Configure)
0~62, step:2
10
10
0~62, step:2
10
10
0~7
-140~-44, step:2
-64
-64
NOT_CFG, CFG
-30~33
23
23
NOT_CFG, CFG
CFG(Configure)
CFG(Configure)
0~62, step:2
29
29
NOT_CFG, CFG
MBW6, MBW15, MBW25, MBW50, MBW75, MBW100
MBW6(1.4M)
DL bandwidth of the Radio Planning serving cell (Internal planning)
CellResel
0~7
NOT_CFG, CFG
CFG(Configure)
CFG(Configure)
T_RESEL_SF_0DO T25, T_RESEL_SF_0DO T5, T_RESEL_SF_1DO T_RESEL_SF_1DO Default/Recommen CellResel T_RESEL_SF_0DO T0(1.0) T0(1.0) ded Value T75, T_RESEL_SF_1DO T0
T_RESEL_SF_0DO T25, T_RESEL_SF_0DO T5, T_RESEL_SF_0DO T_RESEL_SF_0DO Default/Recommen CellResel T_RESEL_SF_0DO T75(0.75) T75(0.75) ded Value T75, T_RESEL_SF_1DO T0
BitString00, BitString01, BitString10, BitString11
BitString01(01)
BitString01(01)
BOOLEAN_FALSE, BOOLEAN_FALSE( BOOLEAN_FALSE( Engineering Design CellResel BOOLEAN_TRUE False) False)
0~31
0~31
NOT_CFG, CFG
0~31
NOT_CFG, CFG
CFG(Configure)
CFG(Configure)
-34~-3
-18
-18
0~17
None
None
CellReselCdma200 0
NOT_CFG, CFG
Engineering Design
CellReselCdma200 0
BOOLEAN_FALSE, BOOLEAN_TRUE( BOOLEAN_TRUE( CellReselCdma200 Engineering Design BOOLEAN_TRUE True) True) 0
NOT_CFG, CFG
Engineering Design
CellReselCdma200 0
0~15
Engineering Design
CellReselCdma200 0
NOT_CFG, CFG
Engineering Design
CellReselCdma200 0
NOT_CFG, CFG
Engineering Design
CellReselCdma200 0
BOOLEAN_FALSE, BOOLEAN_FALSE( BOOLEAN_FALSE( CellReselCdma200 Engineering Design BOOLEAN_TRUE False) False) 0
0~255
Engineering Design
CellReselCdma200 0
NOT_CFG, CFG
Engineering Design
CellReselCdma200 0
0~255
Engineering Design
CellReselCdma200 0
NOT_CFG, CFG
Engineering Design
CellReselCdma200 0
0~255
Engineering Design
CellReselCdma200 0
0~7
Engineering Design
CellReselCdma200 0
NOT_CFG, CFG
Engineering Design
CellReselCdma200 0
T_RESEL_SF_0DO T25, T_RESEL_SF_0DO T5, T_RESEL_SF_0DO T_RESEL_SF_0DO Default/Recommen CellReselCdma200 T_RESEL_SF_0DO T75(0.75) T75(0.75) ded Value 0 T75, T_RESEL_SF_1DO T0
NOT_CFG, CFG
Engineering Design
CellReselCdma200 0
NOT_CFG, CFG
Engineering Design
CellReselCdma200 0
0~32767
Engineering Design
CellReselCdma200 0
0~65535
Engineering Design
CellReselCdma200 0
0~127
Engineering Design
CellReselCdma200 0
0~4095
Engineering Design
CellReselCdma200 0
0~7
Engineering Design
CellReselCdma200 0
0~7
Engineering Design
CellReselCdma200 0
NOT_CFG, CFG
Engineering Design
CellReselCdma200 0
0~6 characters
NULL
None
Engineering Design
CellReselCdma200 0
NOT_CFG, CFG
Engineering Design
CellReselCdma200 0
0~7
Engineering Design
CellReselCdma200 0
NOT_CFG, CFG
Engineering Design
CellReselCdma200 0
NOT_CFG, CFG
Engineering Design
CellReselCdma200 0
NOT_CFG, CFG
Engineering Design
CellReselCdma200 0
0~63
Engineering Design
CellReselCdma200 0
0~7
Engineering Design
CellReselCdma200 0
0~7
Engineering Design
CellReselCdma200 0
0~7
Engineering Design
CellReselCdma200 0
0~7
Engineering Design
CellReselCdma200 0
0~7
Engineering Design
CellReselCdma200 0
0~7
Engineering Design
CellReselCdma200 0
0~7
Engineering Design
CellReselCdma200 0
0~7
Engineering Design
CellReselCdma200 0
0~7
Engineering Design
CellReselCdma200 0
0~17
None
None
CellReselGeran
0~7
Default/Recommen CellReselGeran ded Value
NOT_CFG, CFG
Engineering Design CellReselGeran
T_RESEL_SF_0DO T25, T_RESEL_SF_0DO T5, T_RESEL_SF_1DO T_RESEL_SF_1DO Default/Recommen CellReselGeran T_RESEL_SF_0DO T0(1.0) T0(1.0) ded Value T75, T_RESEL_SF_1DO T0
T_RESEL_SF_0DO T25, T_RESEL_SF_0DO T5, T_RESEL_SF_0DO T_RESEL_SF_0DO Default/Recommen CellReselGeran T_RESEL_SF_0DO T75(0.75) T75(0.75) ded Value T75, T_RESEL_SF_1DO T0
0~17
None
None
CellReselUtran
0~7
Default/Recommen CellReselUtran ded Value
NOT_CFG, CFG
Engineering Design CellReselUtran
T_RESEL_SF_0DO T25, T_RESEL_SF_0DO T5, T_RESEL_SF_1DO T_RESEL_SF_1DO Default/Recommen CellReselUtran T_RESEL_SF_0DO T0(1.0) T0(1.0) ded Value T75, T_RESEL_SF_1DO T0
T_RESEL_SF_0DO T25, T_RESEL_SF_0DO T5, T_RESEL_SF_0DO T_RESEL_SF_0DO Default/Recommen CellReselUtran T_RESEL_SF_0DO T75(0.75) T75(0.75) ded Value T75, T_RESEL_SF_1DO T0
0~17
None
None
CellSel
-140~-44, step:2
-64
-64
Default/Recommen CellSel ded Value
0~16, step:2
-34~-3
-18
-18
NOT_CFG, CFG
1~8
None
Engineering Design CellSel
0~17
None
None
CellSiMap
BOOLEAN_FALSE, BOOLEAN_TRUE( BOOLEAN_TRUE( Engineering Design CellSiMap BOOLEAN_TRUE True) True)
RF8, RF16, RF32, RF64, RF128, RF256, RF512
RF16(16 radio frames)
Default/Recommen CellSiMap ded Value
RF8, RF16, RF32, RF64, RF128, RF256, RF512
RF8, RF16, RF32, RF64, RF128, RF256, RF512
RF8, RF16, RF32, RF64, RF128, RF256, RF512
RF8, RF16, RF32, RF64, RF128, RF256, RF512
RF8, RF16, RF32, RF64, RF128, RF256, RF512
RF8, RF16, RF32, RF64, RF128, RF256, RF512
RF8, RF16, RF32, RF64, RF128, RF256, RF512
RF8, RF16, RF32, RF64, RF128, RF256, RF512
1~300
MERGE, DISCARD DISCARD
DISCARD
MERGE, DISCARD DISCARD
DISCARD
0~17
None
None
CellUlpcComm
AL0, AL04, AL05, AL06, AL07, AL08, AL07(0.7) AL09, AL1
AL07(0.7)
Default/Recommen CellUlpcComm ded Value
-127~-96
-105
-105
-126~24
-67
-67
DELTAF_2, DELTAF0, DELTAF2
DELTAF0(0dB)
DELTAF0(0dB)
DELTAF1, DELTAF3, DELTAF5
DELTAF3(3dB)
DELTAF3(3dB)
DELTAF_2, DELTAF0, DELTAF1, DELTAF2
DELTAF1(1dB)
DELTAF1(1dB)
DELTAF2(2dB)
DELTAF2(2dB)
DELTAF2(2dB)
DELTAF2(2dB)
-2~12, step:2
0~17
None
None
N/A
TimeAlignmentTime r
SF500, SF750, SF1280, SF1920, SF1920 SF2560, SF5120, SF10240, INFINITY
If the long DRX cycle length is required to be greater than or N/A equal to 80 ms, it is recommended that this parameter be set to SF2560.
TimeAlignmentTime r
0~17
None
None
UeTimerConst
MS100_T300, MS200_T300, MS300_T300, MS400_T300, MS600_T300, MS1000_T300, MS1500_T300, MS2000_T300
MS200_T300(200m MS200_T300(200m Default/Recommen UeTimerConst s) s) ded Value
MS100_T301, MS200_T301, MS300_T301, MS400_T301, MS600_T301, MS1000_T301, MS1500_T301, MS2000_T301
MS200_T301(200m MS200_T301(200m Default/Recommen UeTimerConst s) s) ded Value
MS0_T310, MS50_T310, MS100_T310, MS200_T310, MS500_T310, MS1000_T310, MS2000_T310
MS1000_T310(100 MS1000_T310(100 Default/Recommen UeTimerConst 0ms) 0ms) ded Value
MS1000_T311, MS3000_T311, MS5000_T311, MS10000_T311, MS15000_T311, MS20000_T311, MS30000_T311
MS10000_T311(10 MS10000_T311(10 Default/Recommen UeTimerConst 000ms) 000ms) ded Value
n1, n2, n3, n4, n5, n6, n8, n10
n1(1)
n1(1)
Default/Recommen UeTimerConst ded Value
n1, n2, n3, n4, n6, n8, n10, n20
n10(10)
n10(10)
Default/Recommen UeTimerConst ded Value
0~17
None
None
Cell
1~99 characters
None
None
Cell
0~17
None
None
Cell
BOOLEAN_FALSE, BOOLEAN_FALSE( BOOLEAN_FALSE( Engineering Design Cell BOOLEAN_TRUE False) False)
NORMAL_CP, EXTENDED_CP
NORMAL_CP(Norm NORMAL_CP(Norm Radio Planning al) al) (Internal planning)
Cell
NORMAL_CP, EXTENDED_CP
NORMAL_CP(Norm NORMAL_CP(Norm Radio Planning al) al) (Internal planning)
Cell
1~43,61~64
None
None
Cell
NOT_CFG, CFG
Default/Recommen Cell ded Value
18000~45589,6443 18000 6~65535
None
Cell
0~45589,64436~65 None 535
None
Cell
CELL_BW_N6, CELL_BW_N15, CELL_BW_N25, CELL_BW_N50, CELL_BW_N75, CELL_BW_N100
None
None
Cell
CELL_BW_N6, CELL_BW_N15, CELL_BW_N25, CELL_BW_N50, CELL_BW_N75, CELL_BW_N100
None
None
Cell
0~255
None
None
Cell
0~503
None
None
Cell
1~32
CELL_DEACTIVE, CELL_ACTIVE
CELL_DEACTIVE( CELL_DEACTIVE( Default/Recommen Cell Deactivated) Deactivated) ded Value
CELL_UNBLOCK, CELL_HIGH_BLOC K, CELL_UNBLOCK(U CELL_UNBLOCK(U CELL_MIDDLE_BL Engineering Design Cell nblock) nblock) OCK, CELL_LOW_BLOC K
1~1440
60
60
CELL_FDD, CELL_TDD
None
None
Cell
SA0, SA1, SA2, SA3, SA4, SA5, SA6
SA0(SA0)
None
Cell
SSP0, SSP1, SSP2, SSP3, SSP0(SSP0) SSP4, SSP5, SSP6, SSP7, SSP8
None
Cell
dB-24, dB-22, dB20, dB-18, dB-16, dB-14, dB-12, dB10, dB-8, dB-6, dB5, dB-4, dB-3, dB-2, dB-1, dB0, dB1, dB0(0dB) dB2, dB3, dB4, dB5, dB6, dB8, dB10, dB12, dB14, dB16, dB18, dB20, dB22, dB24
dB0(0dB)
Engineering Design Cell
dB0(0dB)
Engineering Design Cell
0~837
None
Logical root sequences for each cell must be configured based on the network plan. The tool for configuring ZadoffChu (ZC) root sequences is recommended. During manual configuration, the following rules apply: 1. If two neighboring cells use the same or overlapping time- Radio Planning frequency (Internal planning) resources for the physical random access channel (PRACH), they must have different values of this parameter. 2. If a cell uses a preamble format less than 4 and provides coverage for a highway or an ultra-high-speed railway, this parameter must be set by referring to
Cell
LOW_SPEED, HIGH_SPEED, ULTRA_HIGH_SPE LOW_SPEED(Low LOW_SPEED(Low Engineering Design Cell ED, speed cell flag) speed cell flag) EXTRA_HIGH_SPE ED
0~4
Cell radius <= 1400 m:Preamble formats 0 to 3 are applicable to an FDD cell, preamble formats 0 to 4 are applicable to a TDD cell; 1400 m < Cell radius <= 14,500 m:Preamble formats 0 to 3 are applicable; 14,500 m < Cell Default/Recommen Cell radius <= 29,500 ded Value m:Preamble formats 1 to 3 are applicable; 29,500 m < Cell radius <= 77,300 m:Preamble formats 1 and 3 are applicable; 77,300 m < Cell radius <= 100,000 m:Preamble format 3 is applicable.
1~100000
10000
10000
Cell
NOT_CFG, CFG
Cell
4.8~5.0,9.6~10.0,14 .6~15.0,18.3~20.0, 98 step:0.1
98
Cell
4.8~5.0,9.6~10.0,14 .6~15.0,18.3~20.0, 98 step:0.1
98
Cell
NOT_CFG, CFG
0~16777215
None
Cell
NOT_CFG, CFG
None
N/A
Cell
-30~36
23
23
N/A
Cell
BOOLEAN_FALSE, BOOLEAN_FALSE( None BOOLEAN_TRUE False)
Cell
SFN, CELL_COMBINATI ON, TWO_RRU_COMBI SFN(SFN) NATION, DIGITAL_COMBIN ATION
None
Cell
NO_COMPRESSIO N, NO_COMPRESSIO None NORMAL_COMPR N(No Compression) ESSION
Cell
CELL_INST_UNIN STALL, CELL_INST_UEM_ CFGING, CELL_INST_RRU_ CFGING, CELL_INST_BBI_C FGING, CELL_INST_RECF GING, None CELL_INST_DELE TING, CELL_INST_NORM AL, CELL_INST_BARR ED, CELL_INST_ALLO CATING_RES, CELL_INST_CRM_ CFGING
None
N/A
Cell
NO_INFORMATIO N, CCEM_FAILURE, CCEM_CELLALG_ ERR_CODE_NON_ BF_VERSION_CEL LACT_FAILED, CCEM_CELLALG_ ERR_CODE_NO_S UPPORT_BF_SW_ ON, CCEM_CELLALG_ ERR_CODE_NO_S UPPORT_MUBF_S W, CCEM_CELLALG_ ERR_CODE_NO_S None UPPORT_VMIMO_ SW, CCEM_CELLALG_ ERR_CODE_NO_S UPPORT_INTRA_S UB_FRAM, CCEM_CELLALG_ ERR_CODE_NO_S UPPORT_EXTERN D_CP, CCEM_CH_PUSC H_HOPING_OFFS ET_INVALID_CFG, CCEM_CH_PUCC H_PRACH_INTER SECTION_ERROR, CCEM_CH_PUCC 0~32 characters None
None
N/A
Cell
None
N/A
Cell
CELL_NO_OP, CELL_SETUP_ACT , CELL_SETUP_UBL , CELL_SETUP_HE ALCHK, CELL_SETUP_141, CELL_SETUP_UL WIDESCAN, CELL_DEL_BLK_L OW, CELL_DEL_BLK_M ID, CELL_DEL_BLK_H IGH, None CELL_DEL_NOUS ER, CELL_DEL_DEA, CELL_DEL_RMV, CELl_DEL_HEALC HK, CELL_DEL_UNHE AL, CELL_DEL_SETUP _FAIL, CELL_DEL_141_D EL, CELL_DEL_ULWID ESCAN, CELL_DEL_CELLN OACCESSALM
None
N/A
Cell
0~32 characters
None
None
N/A
Cell
CELL_NO_OP, CELL_SETUP_ACT , CELL_SETUP_UBL , CELL_SETUP_HE ALCHK, CELL_SETUP_141, CELL_SETUP_UL WIDESCAN, CELL_DEL_BLK_L OW, CELL_DEL_BLK_M ID, CELL_DEL_BLK_H IGH, None CELL_DEL_NOUS ER, CELL_DEL_DEA, CELL_DEL_RMV, CELl_DEL_HEALC HK, CELL_DEL_UNHE AL, CELL_DEL_SETUP _FAIL, CELL_DEL_141_D EL, CELL_DEL_ULWID ESCAN, CELL_DEL_CELLN OACCESSALM
None
N/A
Cell
CELL_PWRSAVE_ UNINSTALL, CELL_PWRSAVE_ RFSHD, CELL_PWRSAVE_ CELLSHD, CELL_PWRSAVE_ LOWPWR_CELLU SEDPWRRDU, CELL_PWRSAVE_ LOWPWR_RSPW None RRDU, CELL_PWRSAVE_ LOWPWR_RFSHD, CELL_PWRSAVE_ LOWPWR_CELLS HD, AUTO_PWROFF_ ONTIME, CELL_PWRSAVE_I NTERRAT_CELLS HD
None
N/A
Cell
BBI_SLOT_0, BBI_SLOT_1, BBI_SLOT_2, BBI_SLOT_3, None BBI_SLOT_4, BBI_SLOT_5, BBI_SLOT_INVALI D
None
N/A
Cell
BASIC_TYPE, TWO_RRU_COMBI NATION_TYPE, SFN_TYPE, BF_TYPE, MIMO_HELP_TYP None E, CELL_COMBINATI ON_TYPE, DIGITAL_COMBIN ATION_TYPE, INVALID_TYPE
None
N/A
Cell
0~62
None
None
N/A
Cell
4~254
None
None
N/A
Cell
0~8
None
None
N/A
Cell
UNINSTALL, SYMBOL_SHUTDO None WN
None
N/A
Cell
0~65535
None
None
N/A
Cell
0~17
None
None
CellBf
SINGLE_LAYER_B SINGLE_LAYER_B F, None F DUAL_LAYER_BF
Engineering Design CellBf
0~17
None
None
CellDLIcicMcPara
5120ms
Default/Recommen CellDLIcicMcPara ded Value
1~8
Infinity(Infinity)
Infinity(Infinity)
RSRP, RSRQ
RSRP
RSRP
0~15, step:0.5
640ms
640ms
-15~15, step:0.5
-13
-13
0~17
None
None
CellLowPower
OFF, ON
OFF(Off)
OFF(Off)
Engineering Design CellLowPower
OFF, ON
OFF(Off)
OFF(Off)
Default/Recommen CellLowPower ded Value
00:00:00~23:59:59
00:00:00
00:00:00
00:00:00~23:59:59
06:00:00
06:00:00
0~1440
120
120
0~1440
120
120
0~1440
120
120
10~100
50
50
-10~0
-1
-1
1~1440
0~17
None
None
CellMro
NOT_CFG, CFG
None
Engineering Design CellMro
None
dB-24, dB-22, dB20, dB-18, dB-16, dB-14, dB-12, dB10, dB-8, dB-6, dB5, dB-4, dB-3, dB-2, dB-1, dB0, dB1, dB-24(-24dB) dB2, dB3, dB4, dB5, dB6, dB8, dB10, dB12, dB14, dB16, dB18, dB20, dB22, dB24
None
0~17
None
None
CellRacThd
1~15
Engineering Design CellRacThd
1~15
10
10
10~99
90
90
10~99
90
90
10~99
90
90
10~99
90
90
0~90
0~90
0~90
0~99
65
65
0~99
65
65
0~99
65
65
0~99
65
65
1~100
90
90
1~100
90
90
1~100
90
90
0~100
95
95
0~100
90
90
1~15
10
10
0~50
20
20
1~15
10~100
95
95
10~100
95
95
10~100
90
90
10~100
90
90
0~9000
3000
Set the parameter based on actual service requirements. The recommended values are described as follows: FDD: For a cell with a 1.4 MHz bandwidth, a value in the range of 0 to 560 is recommended; For a cell with a 3 MHz bandwidth, a value in the range Engineering Design CellRacThd of 0 to 1800 is recommended; For a cell with a 5 MHz bandwidth, a value in the range of 0 to 3000 is recommended; For a cell with a 10 MHz bandwidth, a value in the range of 0 to 3000 is recommended; For a cell with a 15 MHz bandwidth, a value in the range of 0 to 6000 is recommended;
0~17
None
None
CellRfShutdown
OFF, ON
OFF(Off)
OFF(Off)
Engineering Design CellRfShutdown
00:00:00~23:59:59
00:00:00
00:00:00
Default/Recommen CellRfShutdown ded Value
00:00:00~23:59:59
06:00:00
06:00:00
Default/Recommen CellRfShutdown ded Value
0~7
Engineering Design CellRfShutdown
0~17
None
None
CellRicAlgo
OFF, ON
OFF(Off)
The value OFF is recommended if there is no remote interference to the cell. The value ON is recommended if there is remote interference to the cell.
Engineering Design CellRicAlgo
0~2
The value 0 is recommended if there is no remote interference to the cell. The value 1 is recommended if there is remote interference to the cell.
Engineering Design CellRicAlgo
OFF, ON
OFF(Off)
NOT_MUTE(NOT_ Radio Planning MUTE) (Internal planning)
CellRicAlgo
0~17
None
None
CellShutdown
OFF, ON
OFF(Off)
OFF(Off)
Engineering Design CellShutdown
00:00:00~23:59:59
00:00:00
00:00:00
Default/Recommen CellShutdown ded Value
00:00:00~23:59:59
06:00:00
06:00:00
0~100
20
20
0~100
20
20
0~100
20
20
0~100
20
20
0~17
None
None
CellULIcicMcPara
5120ms
Default/Recommen CellULIcicMcPara ded Value
1~8
Infinity(Infinity)
Infinity(Infinity)
RSRP, RSRQ
RSRP
RSRP
0~15, step:0.5
640ms
640ms
-15~15, step:0.5
-10
-10
0~17
None
None
CellUlschAlgo
Scenario A: The EPF policy is recommended on live networks. Scenario B: The MAX C/I policy is recommended when the operator or Huawei desires to verify the system performance in maximum capacities. ULSCH_STRATEG Scenario C: The PF Y_EPF, policy is ULSCH_STRATEG recommended when Y_MAX_CI, ULSCH_STRATEG Default/Recommen the operator or CellUlschAlgo ULSCH_STRATEG Y_EPF(EPF) ded Value Huawei desires to Y_PF, verify the system ULSCH_STRATEG performance in Y_RR scenarios where the capacity, coverage, and fairness reach a tradeoff. Scenario D: The RR policy is recommended when the operator or Huawei desires to verify that each UE has an equal opportunity to be scheduled.
ADAPTIVE_HARQ_ SW_ON, ADAPTIVE_HARQ_ ADAPTIVE_HARQ_ ADAPTIVE_HARQ_ SW_SEMI_ON(Se SW_SEMI_ON(Se Engineering Design CellUlschAlgo SW_OFF, miOn) miOn) ADAPTIVE_HARQ_ SW_SEMI_ON
0.01~0.99, step:0.01
10
10
Default/Recommen CellUlschAlgo ded Value
0~100
50
50
1~40
45~1500
80
80
HOPPING_OFF, HOPPING_TYPE1, HOPPING_OFF(Ho HOPPING_OFF(Ho Default/Recommen HOPPING_TYPE2, CellUlschAlgo pping off) pping off) ded Value HOPPING_TYPE2_ RANDOM
0~100
16~15000
600
600
2~3
Scenario A: The recommended value is 3 if the cell serves a large number of cell center users Default/Recommen CellUlschAlgo (CCUs). ded Value Scenario B: The recommended value is 2 in commercial networks.
0~17
None
None
InterRatCellShutdo wn
OFF, ON
OFF(Off)
None
Engineering Design
InterRatCellShutdo wn
00:00:00~23:59:59
03:00:00
None
Default/Recommen InterRatCellShutdo ded Value wn
00:00:00~23:59:59
05:00:00
None
0~5000
20
None
0~100
10
None
0~100
10
None
0~17
None
None
CellAlgoSwitch
RachAdjSwitch, HoRaSwitch, UnsyncRaSwitch, MaksIdxSwitch, BackOffSwitch
RachAdjSwitch:Off, HoRaSwitch:On, UnsyncRaSwitch:O n, MaksIdxSwitch:Off, BackOffSwitch:Off
RachAdjSwitch:Off HoRaSwitch:On UnsyncRaSwitch:O Engineering Design CellAlgoSwitch n MaksIdxSwitch:Off BackOffSwitch:Off
SrsSubframeRecfS SrsSubframeRecfS SrsSubframeRecfS Engineering Design CellAlgoSwitch witch witch:On witch:On
PucchSwitch
PucchSwitch:On
In ultra-high-speed scenarios, the recommended value of PucchSwitch is Engineering Design CellAlgoSwitch OFF. In other scenarios, the recommended value of PucchSwitch is ON.
AqmAlgoSwitch
AqmAlgoSwitch:Off AqmAlgoSwitch:Off Engineering Design CellAlgoSwitch
CqiAdjAlgoSwitch, StepVarySwitch
CqiAdjAlgoSwitch:O CqiAdjAlgoSwitch:O n, n Engineering Design CellAlgoSwitch StepVarySwitch:Off StepVarySwitch:Off
OFF, ON
OFF(Off)
OFF(Off)
Engineering Design CellAlgoSwitch
DynAdjVoltSwitch
Dynamic Adjust Voltage Switch:Off
Dynamic Adjust Voltage Switch:Off
dlCacSwitch:Off, ulCacSwitch:Off, dlCacPredictSwitch: DlSwitch, UlSwitch, Off, DlPredictSwitch, ulCacPredictSwitch: UlPredictSwitch, Off, GbrUsageSwitch, GbrUsedPRbCheck DlLdcSwitch, Switch:Off, UlLdcSwitch, dlLdcSwitch:Off, RelDrbSwitch, ulLdcSwitch:Off, PreemptionSwitch LdcDrbRelSwitch:Of f, PreemptionSwitch: Off
DlSwitch:Off UlSwitch:Off DlPredictSwitch:Off UlPredictSwitch:Off GbrUsageSwitch:Of f Engineering Design CellAlgoSwitch DlLdcSwitch:Off UlLdcSwitch:Off RelDrbSwitch:Off PreemptionSwitch: Off
IntraFreqMlbSwitch: Off, IntraFreqMlbSwitch, InterFreqMlbSwitch: InterFreqMlbSwitch, Off, UtranMlbSwitch, UtranMlbSwitch:Off, GeranMlbSwitch, GeranMlbSwitch:Off CdmaMlbSwitch, , IntraFreqIdleMlbSwi CdmaMlbSwitch:Off tch , IntraFreqIdleMlbSwi tch:Off
It is recommended that IntraFreqMlbSwitch and IntraFreqIdleMlbSwi tch be set to OFF, when the cell load is light in an early stage of network deployment (that is, the average cell load is lower than 50%) and there is no obvious imbalance in the cell loads (that is, the load difference Engineering Design CellAlgoSwitch between cells is lower than the related threshold). It is recommended that IntraFreqMlbSwitch and IntraFreqIdleMlbSwi tch be set to ON when the cell load is heavy (that is, the average load in the cell exceeds IntraFreqMlbThd) and there is an imbalance in the cell loads (that is,
PdschSpsPcSwitch: PdschSpsPcSwitch, Off, PhichInnerLoopPcS PhichInnerLoopPcS witch, witch:Off, PdcchPcSwitch PdcchPcSwitch:On
PdschSpsPcSwitch: Off PhichInnerLoopPcS Engineering Design CellAlgoSwitch witch:Off PdcchPcSwitch:On
CloseLoopSpsSwitc h, InnerLoopPuschSwi tch, PhSinrTarUpdateS witch, InnerLoopPucchSwi tch, OiSinrTarUpdateSw itch, PowerSavingSwitch
CloseLoopSpsSwitc h:Off, InnerLoopPuschSwi tch:On, PhSinrTarUpdateS witch:Off, InnerLoopPucchSwi tch:On, OiSinrTarUpdateSw itch:Off, PowerSavingSwitch :Off
CloseLoopSpsSwitc h:Off InnerLoopPuschSwi tch:On PhSinrTarUpdateS witch:Off Engineering Design CellAlgoSwitch InnerLoopPucchSwi tch:On OiSinrTarUpdateSw itch:Off PowerSavingSwitch :Off
BfSwitch
BfSwitch:Off
BfSwitch:Off
FreqSelSwitch, ServiceDiffSwitch, SpsSchSwitch, MBSFNShutDownS witch
FreqSelSwitch:Off, ServiceDiffSwitch:O ff, SpsSchSwitch:Off, MBSFNShutDownS witch:Off
FreqSelSwitch:Off ServiceDiffSwitch:O ff Engineering Design CellAlgoSwitch SpsSchSwitch:Off MBSFNShutDownS witch:Off
SpsSchSwitch:Off, SpsSchSwitch, SinrAdjustSwitch:O SinrAdjustSwitch, n, PreAllocationSwitch PreAllocationSwitch , UlVmimoSwitch, :On, TtiBundlingSwitch, UlVmimoSwitch:Off, ImIcSwitch TtiBundlingSwitch:O ff, ImIcSwitch:Off
SpsSchSwitch:Off SinrAdjustSwitch:O n PreAllocationSwitch :On Engineering Design CellAlgoSwitch UlVmimoSwitch:Off TtiBundlingSwitch:O ff ImIcSwitch:Off
OFF, ON
OFF(Off)
OFF(Off)
Default/Recommen CellAlgoSwitch ded Value
FreqPriorIFHOSwitc h, FreqPriorIFBlindHO Switch
FreqPriorIFHOSwitc h:Off, FreqPriorIFBlindHO Switch:On
FreqPriorIFHOSwitc h:Off Default/Recommen CellAlgoSwitch FreqPriorIFBlindHO ded Value Switch:On
MuBfSwitch
MuBfSwitch:Off
MuBfSwitch:Off
OFF, ON
OFF(Off)
OFF(Off)
ACBAR_SWITCH_ DYNAMIC, ACBAR_SWITCH_ ACBAR_SWITCH_ ACBAR_SWITCH_ STATIC(static STATIC(static Engineering Design CellAlgoSwitch STATIC, configuration) configuration) ACBAR_SWITCH_ DISABLE
None
None
0~17
None
None
CellDlIcic
MODE1, MODE2, MODE3, INVALID
If this parameter is not set to INVALID(Invalid DL band division scheme), it is recommended that this parameter be set to a different value from those of neighboring cells. If INVALID(Invalid DL it is impossible for band division neighboring cells to Engineering Design CellDlIcic scheme) use mutually different band modes, it is recommended that this parameter be set to the same value as that of a neighboring cell that has the weakest interference with the current cell. Radio Planning (Internal planning)
0~17
None
None
CellDlpcPdcch
-15~15, step:0.1
-30
-30
Default/Recommen CellDlpcPdcch ded Value
0~17
None
None
CellDlpcPdsch
PA_NEG6, PA_NEG4DOT77, PA_NEG3, PA_NEG6(-6dB) PA_NEG1DOT77, PA_0, PA_1, PA_2, PA_3
PA_NEG6(-6dB)
Default/Recommen CellDlpcPdsch ded Value
PA_NEG6, PA_NEG4DOT77, PA_NEG3, PA_NEG1DOT77(- PA_NEG1DOT77(- Default/Recommen CellDlpcPdsch PA_NEG1DOT77, 1.77dB) 1.77dB) ded Value PA_0, PA_1, PA_2, PA_3
0~17
None
None
CellDlpcPhich
-15~15, step:0.1
Default/Recommen CellDlpcPhich ded Value
0~17
None
None
CellDlschAlgo
DLSCH_PRI_TYPE _EPF, DLSCH_PRI_TYPE _PF, DLSCH_PRI_TYPE DLSCH_PRI_TYPE Engineering Design CellDlschAlgo DLSCH_PRI_TYPE _EPF(EPF) _EPF(EPF) _MAX_CI, DLSCH_PRI_TYPE _RR
0~100
Engineering Design CellDlschAlgo
0~1, step:0.01
0~1, step:0.01
10
10
SW_MAX_SM_RA NK_1, SW_MAX_SM_RA NK_2, SW_MAX_SM_RA NK_4
SW_MAX_SM_RA NK_2
None
0~17
None
None
CellMLB
1~100
60
60
Engineering Design CellMLB
1~100
60
60
1~100
75
75
LOAD_EXCHANGE _PERIOD_1S, LOAD_EXCHANGE _PERIOD_2S, LOAD_EXCHANGE LOAD_EXCHANGE Default/Recommen CellMLB LOAD_EXCHANGE _PERIOD_5S(5s) _PERIOD_5S(5s) ded Value _PERIOD_5S, LOAD_EXCHANGE _PERIOD_10S
0~50
Default/Recommen CellMLB ded Value
1~50
15
15
Default/Recommen CellMLB ded Value
0~17
None
None
CellPdcchAlgo
CONGREG_LV4, CONGREG_LV8
CONGREG_LV4
CONGREG_LV4
Engineering Design CellPdcchAlgo
OFF, ON
ON(On)
ON(On)
1~4
If the switch for dynamic adjustment to the number of OFDM symbols occupied by the PDCCH is turned on, set this parameter to 1. If the switch for dynamic adjustment to the number of OFDM symbols occupied by the PDCCH is turned off, set this parameter to 4 for the bandwidth of 1.4 Engineering Design CellPdcchAlgo MHz and to 3 for other bandwidths. In addition, if this switch is turned off for a smallbandwidth cell, PDCCH resources may be insufficient due to the smaller number of occupied OFDM symbols, and accordingly UEs cannot access the cell. In this scenario, set this parameter to 3 for the bandwidth of 1.4
0~100
OFF, ON
ON(On)
In non-ultra-highspeed scenarios where the eNodeB operates in FDD mode, the Engineering Design CellPdcchAlgo recommended value is ON. In other scenarios, the recommended value is OFF.
1~100
100
There is also a lower limit for the CCE usage within each TTI. If the value of this parameter is relatively small, the PDCCH has insufficient CCE resources, which will affect the access success rate of cell edge UEs (CEUs), handover success rate, CCE assignment success rate for DL Engineering Design CellPdcchAlgo scheduling, and especially that for UL scheduling. Therefore, at least 24 available CCEs are required within each TTI. The lower limits for the CCE usage within each TTI are described as follows for cells with different configurations: (1) If the cell bandwidth and the number of PDCCH symbols are 10
OFF, ON
ON(On)
ON(On)
0~17
None
None
CellPucchAlgo
0~50
10
In FDD mode, the recommended value is 0 for bandwidths of 1.4 MHz and 3 MHz, 10 for bandwidths of 5 MHz and 10 MHz, and 20 for bandwidths of 15 MHz and 20 MHz. In TDD mode with the SubframeAssignme nt parameter set to SA0 or SA1, the recommended value is 0 for Default/Recommen CellPucchAlgo bandwidths of 1.4 ded Value MHz and 3 MHz, and 5 for bandwidths of 5 MHz, 10 MHz, 15 MHz, and 20 MHz. In TDD mode with the SubframeAssignme nt parameter set to SA2 or SA5, the recommended value is 0 for all bandwidths. If a competition test on the access delay or handover delay is
0~17
None
None
CellNoAccessAlmP ara
00:00:00~23:59:59
00:00:00
00:00:00
Default/Recommen CellNoAccessAlmP ded Value ara
00:00:00~23:59:59
00:00:00
00:00:00
0~72
0~17
None
None
CellUlIcic
MODE1, MODE2, MODE3, INVALID
If this parameter is not set to INVALID(Invalid UL band division scheme), it is recommended that this parameter be set to a different value from those of neighboring cells. If INVALID(Invalid UL it is impossible for band division neighboring cells to Engineering Design CellUlIcic scheme) use mutually different band modes, it is recommended that this parameter be set to the same value as that of a neighboring cell that has the weakest interference with the current cell.
0~17
None
None
CellSimuLoad
0~9
Default/Recommen CellSimuLoad ded Value
TM1, TM2, TM7, TM8
TM2(TM2)
TM2(TM2)
Default/Recommen CellSimuLoad ded Value
0~100
None
None
N/A
CellSimuLoad
0~100
None
None
N/A
CellSimuLoad
0~100, step:0.01
None
None
N/A
CellSimuLoad
0~100, step:0.01
None
None
N/A
CellSimuLoad
0~1200
None
None
N/A
CellSimuLoad
0~1200
None
None
N/A
CellSimuLoad
0~17
None
None
BcchCfg
MOD_PERIOD_CO EFF_N2, MOD_PERIOD_CO EFF_N4, MOD_PERIOD_CO MOD_PERIOD_CO Default/Recommen BcchCfg MOD_PERIOD_CO EFF_N2(2) EFF_N4(4) ded Value EFF_N8, MOD_PERIOD_CO EFF_N16
0~17
None
None
CellChPwrCfg
-15.875~15.875, step:0.005
-600
The recommended value is 0 for TDD cells with bandwidths of 10 Default/Recommen MHz, 15 MHz, and CellChPwrCfg ded Value 20 MHz, and -600 for TDD cells with other bandwidths and all FDD cells.
-15.875~15.875, step:0.005
-600
-600 in normal scenarios and peak rate tests, or 0 in Default/Recommen CellChPwrCfg the tests on the ded Value maximum cell radius.
-15.875~15.875, step:0.005
Default/Recommen CellChPwrCfg ded Value
-15.875~15.875, step:0.005
-600
-600 in normal scenarios and peak rate tests, or 0 in Default/Recommen CellChPwrCfg the tests on the ded Value maximum cell radius.
-15.875~15.875, step:0.005
-15.875~15.875, step:0.005
-15.875~15.875, step:0.005
0~17
None
None
PDSCHCfg
-60~50, step:0.1
182
None
Default/Recommen PDSCHCfg ded Value
0~3
Single-antenna: 0; double-antenna: 1
Default/Recommen PDSCHCfg ded Value
0~17
None
None
RACHCfg
DB0_PWR_RAMPI NG_STEP, DB2_PWR_RAMPI NG_STEP, DB2_PWR_RAMPI DB2_PWR_RAMPI Default/Recommen RACHCfg DB4_PWR_RAMPI NG_STEP(2dB) NG_STEP(2dB) ded Value NG_STEP, DB6_PWR_RAMPI NG_STEP
DBM_120, DBM_118, DBM_116, DBM_114, DBM_112, DBM_110, DBM_108, DBM_104(DBM_106, 104dBm) DBM_104, DBM_102, DBM_100, DBM_98, DBM_96, DBM_94, DBM_92, DBM_90
DBM_104(104dBm)
Default/Recommen RACHCfg ded Value
B56_MSG_SIZE_G ROUPA, B144_MSG_SIZE_ GROUPA, B56_MSG_SIZE_G B56_MSG_SIZE_G Default/Recommen RACHCfg B208_MSG_SIZE_ ROUPA(56bits) ROUPA(56bits) ded Value GROUPA, B256_MSG_SIZE_ GROUPA
0~94
None
Engineering Design RACHCfg
NOT_CFG, CFG
Default/Recommen RACHCfg ded Value
0~63
For FDD cells established on an LBBPd: If preamble format 0 is used, this parameter can be set to 15 or a value in the range of 0 to 8. If preamble format 1 is used, this parameter can be set to 31 or a value in the range of 16 to 24. If preamble format 2 is used, this Engineering Design RACHCfg parameter can be set to 47 or a value in the range of 32 to 37. If preamble format 3 is used, this parameter can be set to 63 or a value in the range of 48 to 53. For FDD cells established on an LBBPc: If a cell is configured with the speed flag of LOW_SPEED, None Radio Planning (Internal planning) SRSCfg
0~17
None
SC0, SC1, SC2, SC3, SC4, SC5, SC6, SC7, SC8, SC3(3) SC9, SC10, SC11, SC12, SC13, SC14
The value SC3(3) is recommended for FDD cells. Engineering Design SRSCfg The value SC0(0) is recommended for TDD cells.
BOOLEAN_FALSE, BOOLEAN_TRUE( BOOLEAN_TRUE( Default/Recommen SRSCfg BOOLEAN_TRUE True) True) ded Value
It is recommended that this parameter be set to BOOLEAN_TRUE( True) if any of the following conditions is met: (1) The MimoAdaptiveSwitc BOOLEAN_FALSE, BOOLEAN_TRUE( h parameter is set Default/Recommen SRSCfg BOOLEAN_TRUE True) to OC_ADAPTIVE; ded Value (2) UlVmimoSwitch under the UlSchSwitch parameter is turned on; (3) The WM parameter in the BBP MO is set to TDD_ENHANCE.
ACCESS_FIRST, ACCESS_FIRST(A ACCESS_FIRST(A EXPERIENCE_FIR Engineering Design SRSCfg ccess First) ccess First) ST
BW0, BW1, BW2, BW3, BW4, BW5, BW6, BW7
None
None
N/A
SRSCfg
0~17
None
None
PHICHCfg
NORMAL, EXTENDED
NORMAL
NORMAL
Default/Recommen PHICHCfg ded Value
ONE_SIXTH, HALF, ONE, TWO
ONE
ONE
Default/Recommen PHICHCfg ded Value
0~17
None
None
PCCHCfg
rf32, rf64, rf128, rf256
rf128(128 radio frames)
rf128(128 radio frames)
Default/Recommen PCCHCfg ded Value
FOURT, TWOT, ONET, HALFT, QUARTERT, ONE_EIGHTT, ONET ONE_SIXTEENTHT , ONE_THIRTY_SEC ONDT
ONET
Default/Recommen PCCHCfg ded Value
0~17
None
None
PUSCHCfg
1~4
If UlHoppingType and HoppingMode are set to HOPPING_TYPE2 and INTER_SUB_FRA ME, respectively, the recommended value of this parameter is 4. If UlHoppingType and HoppingMode are set to HOPPING_TYPE2 and INTRA_AND_INTE R_SUB_FRAME, Default/Recommen PUSCHCfg respectively, the ded Value recommended value of this parameter is 1. If UlHoppingType and HoppingMode are set to HOPPING_TYPE2_ RANDOM and INTER_SUB_FRA ME, respectively, the recommended value of this parameter is 4. If UlHoppingType and HoppingMode are set to INTER_SUB_FRA ME(Inter) Default/Recommen PUSCHCfg ded Value
INTER_SUB_FRA ME, INTER_SUB_FRA INTRA_AND_INTE ME(Inter) R_SUB_FRAME
0~98
22
In FDD cells with the normal CP length, if DeltaShift is set to DS1_DELTA_SHIF T, the recommended values of this parameter are 2, 4, 7, 10, 11, and 11, corresponding to cell bandwidths in ascending order; if DeltaShift is set to DS2_DELTA_SHIF T, the recommended Default/Recommen PUSCHCfg values of this ded Value parameter are 2, 4, 8, 12, 13, and 14, corresponding to cell bandwidths in ascending order; if DeltaShift is set to DS3_DELTA_SHIF T, the recommended values of this parameter are 2, 6, 9, 16, 17, and 19, corresponding to cell bandwidths in ascending order. In FDD cells with
BOOLEAN_FALSE, BOOLEAN_FALSE( BOOLEAN_FALSE( Engineering Design PUSCHCfg BOOLEAN_TRUE False) False)
0~29
Engineering Design PUSCHCfg
BOOLEAN_FALSE, BOOLEAN_FALSE( BOOLEAN_FALSE( Engineering Design PUSCHCfg BOOLEAN_TRUE False) False)
0~7
Default/Recommen PUSCHCfg ded Value
No recommended value. The value BOOLEAN_FALSE, BOOLEAN_TRUE( should be set based Engineering Design PUSCHCfg BOOLEAN_TRUE True) on the 64QAM capability of the UE. 0~17 None None Radio Planning (Internal planning) PUCCHCfg
Set this parameter to DS2_DELTA_SHIF T for a cell configured with the LBBPc and the normal cyclic prefix (CP). Set this parameter to DS3_DELTA_SHIF T for a cell DS1_DELTA_SHIF configured with the T, LBBPc and the DS2_DELTA_SHIF DS1_DELTA_SHIF Default/Recommen extended CP. PUCCHCfg T, T(ds1) ded Value Set this parameter DS3_DELTA_SHIF to T DS1_DELTA_SHIF T for a cell configured with the LBBPd and the normal CP. Set this parameter to DS3_DELTA_SHIF T for a cell configured with the LBBPd and the extended CP.
0~100
Engineering Design PUCCHCfg
0~20
Engineering Design PUCCHCfg
6~32 characters
None
None
Cdma2000External CellPlmn
000~999
None
None
00~99,000~999
None
None
0~17
None
None
Cdma2000HrpdNce ll
6~32 characters
None
None
Cdma2000HrpdNce ll
PERMIT_HO_ENU M, PERMIT_HO_ENU PERMIT_HO_ENU Radio Planning FORBID_HO_ENU M(Permit Ho) M(Permit Ho) (Internal planning) M
Cdma2000HrpdNce ll
PERMIT_RMV_EN PERMIT_RMV_EN PERMIT_RMV_EN UM, Radio Planning UM(Permit ANR UM(Permit ANR FORBID_RMV_EN (Internal planning) Remove) Remove) UM
Cdma2000HrpdNce ll
0~32
Engineering Design
Cdma2000HrpdNce ll
BOOLEAN_FALSE, BOOLEAN_FALSE( BOOLEAN_FALSE( Cdma2000HrpdNce Engineering Design BOOLEAN_TRUE False) False) ll
0~99 characters
NULL
None
Engineering Design
Cdma2000HrpdNce ll
0~99 characters
NULL
None
Engineering Design
Cdma2000HrpdNce ll
0~17
None
None
Cdma2000Nfreq
bc0, bc1, bc2, bc3, bc4, bc5, bc6, bc7, bc8, bc9, bc10, None bc11, bc12, bc13, bc14, bc15, bc16, bc17
None
Cdma2000Nfreq
0~2047
None
None
Cdma2000Nfreq
-15~15
Engineering Design Cdma2000Nfreq
NOT_CFG, CFG
0~15
None
000~999
None
None
EutranExternalCellP lmn
00~99,000~999
None
None
0~1048575
None
None
0~255
None
None
000~999
None
None
00~99,000~999
None
None
0~65535
None
None
GeranExternalCellP lmn
1~65533,65535
None
None
000~999
None
None
00~99,000~999
None
None
000~999
None
None
00~99,000~999
None
None
0~268435455
None
None
UtranExternalCellPl mn
000~999
None
None
00~99,000~999
None
None
000~999
None
None
00~99,000~999
None
None
6~32 characters
None
None
Cdma2000External Cell
None
0~2047
None
None
0~511
None
None
CDMA2000_HRPD, CDMA2000_HRPD( CDMA2000_HRPD( Radio Planning CDMA2000_1XRTT CDMA2000_HRPD) CDMA2000_HRPD) (Internal planning)
000~999
None
None
00~99,000~999
None
None
0~99 characters
NULL
None
Engineering Design
0~17
None
None
Cdma20001XRTTN cell
6~32 characters
None
None
Cdma20001XRTTN cell
Cdma20001XRTTN cell
Cdma20001XRTTN cell
0~32
Engineering Design
Cdma20001XRTTN cell
BOOLEAN_FALSE, BOOLEAN_FALSE( BOOLEAN_FALSE( Cdma20001XRTTN Engineering Design BOOLEAN_TRUE False) False) cell
0~99 characters
NULL
None
Engineering Design
Cdma20001XRTTN cell
0~99 characters
NULL
None
Engineering Design
Cdma20001XRTTN cell
0~17
None
None
Cdma2000BandCla ss
None
Cdma2000BandCla ss
0~7
Cdma2000BandCla ss
0~63
22
22
Cdma2000BandCla ss
0~63
22
22
Cdma2000BandCla ss
000~999
None
None
GeranExternalCell
00~99,000~999
None
None
GeranExternalCell
0~65535
None
None
GeranExternalCell
1~65533,65535
None
None
GeranExternalCell
NOT_CFG, CFG
Default/Recommen GeranExternalCell ded Value
0~255
None
GeranExternalCell
None
None
GeranExternalCell
0~1023
None
None
GeranExternalCell
0~7
None
None
GeranExternalCell
0~7
None
None
GeranExternalCell
DTM_AVAILABLE, DTM_NOT_AVAILA DTM_NOT_AVAILA Radio Planning DTM_NOT_AVAILA BLE BLE (Internal planning) BLE
GeranExternalCell
0~99 characters
NULL
None
Engineering Design GeranExternalCell
BOOLEAN_FALSE, BOOLEAN_FALSE( BOOLEAN_FALSE( Radio Planning BOOLEAN_TRUE False) False) (Internal planning)
GeranExternalCell
0~17
None
None
GeranNcell
000~999
None
None
GeranNcell
00~99,000~999
None
None
GeranNcell
1~65533,65535
None
None
GeranNcell
0~65535
None
None
GeranNcell
PERMIT_RMV_EN PERMIT_RMV_EN PERMIT_RMV_EN UM, UM(Permit ANR UM(Permit ANR Engineering Design GeranNcell FORBID_RMV_EN Remove) Remove) UM
PERMIT_HO_ENU M, PERMIT_HO_ENU PERMIT_HO_ENU Engineering Design GeranNcell FORBID_HO_ENU M(Permit Ho) M(Permit Ho) M
0~32
Engineering Design GeranNcell
BOOLEAN_FALSE, BOOLEAN_FALSE( BOOLEAN_FALSE( Default/Recommen GeranNcell BOOLEAN_TRUE False) False) ded Value
0~99 characters
NULL
None
0~99 characters
NULL
None
0~1048575
None
None
N/A
GeranNcell
0~32 characters
None
None
N/A
GeranNcell
0~32 characters
None
None
N/A
GeranNcell
0~17
None
None
GeranNfreqGroup
0~31
None
None
GeranNfreqGroup
GSM, GPRS, EDGE
None
None
GeranNfreqGroup
0~1023
None
None
GeranNfreqGroup
None
None
GeranNfreqGroup
NOT_CFG, CFG
Engineering Design GeranNfreqGroup
0~7
NOT_CFG, CFG
Default/Recommen GeranNfreqGroup ded Value
0~39
None
-115~-25, step:2
0~62, step:2
0~62, step:2
-15~15
0~255
255
255
0~17
None
None
GeranNfreqGroupAr fcn
0~31
None
None
0~1023
None
None
0~17
None
None
Engineering Design IntraFreqBlkCell
0~503
None
None
0~99 characters
NULL
None
n1, n4, n8, n12, n16, n24, n32, n48, n64, n84, n96, n1(n1) n128, n168, n252, n504
None
0~17
None
None
EutranIntraFreqNCe ll
000~999
None
None
00~99,000~999
None
None
0~1048575
None
None
0~255
None
None
dB0(0dB)
Default/Recommen EutranIntraFreqNCe ded Value ll
dB0(0dB)
Default/Recommen EutranIntraFreqNCe ded Value ll
BOOLEAN_FALSE, BOOLEAN_FALSE( BOOLEAN_FALSE( Default/Recommen EutranIntraFreqNCe BOOLEAN_TRUE False) False) ded Value ll
0~99 characters
NULL
None
Engineering Design
0~99 characters
NULL
None
Engineering Design
0~17
None
None
EutranInterNFreq
0~45589,64436~65 None 535
None
EutranInterNFreq
NOT_CFG, CFG
Default/Recommen EutranInterNFreq ded Value
18000~45589,6443 18000 6~65535
None
EutranInterNFreq
NOT_CFG, CFG
0~7
EutranInterNFreq
0~7
NOT_CFG, CFG
0DOT25_ENUM, 0DOT5_ENUM, 0DOT75_ENUM, 1DOT0_ENUM
0DOT25_ENUM(0.2 None 5)
Engineering Design EutranInterNFreq
0DOT25_ENUM, 0DOT5_ENUM, 0DOT75_ENUM, 1DOT0_ENUM
0DOT25_ENUM(0.2 None 5)
MBW6, MBW15, MBW25, MBW50, MBW75, MBW100
None
None
dB1(1dB)
0~62, step:2
11
11
0~62, step:2
11
11
-140~-44, step:2
-64
-64
NOT_CFG, CFG
-30~33
23
23
BitString00, BitString01, BitString10, BitString11
BitString01(01)
BitString01(01)
BOOLEAN_FALSE, BOOLEAN_FALSE( BOOLEAN_FALSE( Default/Recommen EutranInterNFreq BOOLEAN_TRUE False) False) ded Value
EventA3, EventA4, EventA4(EventA4) EventA5
If the neighboring EUTRAN frequency and the serving frequency are in the same frequency band, the value EventA3 is recommended. Engineering Design EutranInterNFreq If the neighboring EUTRAN frequency and the serving frequency are in different frequency bands, the value EventA4 is recommended.
0~31
EutranInterNFreq
0~31
EutranInterNFreq
NOT_CFG, CFG
-34~-3
-18
-18
EutranInterNFreq
0~17
None
None
Engineering Design InterFreqBlkCell
0~45589,64436~65 None 535
None
0~503
None
None
0~99 characters
NULL
None
n1, n4, n8, n12, n16, n24, n32, n48, n64, n84, n96, n1(n1) n128, n168, n252, n504
None
0~17
None
None
EutranInterFreqNCe ll
000~999
None
None
00~99,000~999
None
None
0~1048575
None
None
0~255
None
None
dB0(0dB)
Default/Recommen EutranInterFreqNCe ded Value ll
dB0(0dB)
Default/Recommen EutranInterFreqNCe ded Value ll
0~32
BOOLEAN_FALSE, BOOLEAN_FALSE( BOOLEAN_FALSE( Default/Recommen EutranInterFreqNCe BOOLEAN_TRUE False) False) ded Value ll
0~99 characters
NULL
None
Engineering Design
0~99 characters
NULL
None
Engineering Design
000~999
None
None
EutranExternalCell
00~99,000~999
None
None
EutranExternalCell
0~1048575
None
None
EutranExternalCell
0~255
None
None
EutranExternalCell
0~45589,64436~65 None 535
None
EutranExternalCell
NOT_CFG, CFG
Default/Recommen EutranExternalCell ded Value
18000~45589,6443 18000 6~65535
None
EutranExternalCell
0~503
None
None
EutranExternalCell
0~65535
None
None
EutranExternalCell
0~99 characters
NULL
None
Engineering Design EutranExternalCell
0~17
None
None
GeranRanShare
0~31
None
None
GeranRanShare
000~999
None
None
GeranRanShare
00~99,000~999
None
None
GeranRanShare
NOT_CFG, CFG
GeranRanShare
0~7
GeranRanShare
0~17
None
None
UtranNCell
000~999
None
None
UtranNCell
00~99,000~999
None
None
UtranNCell
0~268435455
None
None
UtranNCell
UtranNCell
UtranNCell
0~32
UtranNCell
BOOLEAN_FALSE, BOOLEAN_FALSE( BOOLEAN_FALSE( Default/Recommen UtranNCell BOOLEAN_TRUE False) False) ded Value
0~99 characters
NULL
None
Engineering Design UtranNCell
0~99 characters
NULL
None
Engineering Design UtranNCell
0~1048575
None
None
N/A
UtranNCell
0~4095
None
None
N/A
UtranNCell
0~32 characters
None
None
N/A
UtranNCell
0~32 characters
None
None
N/A
UtranNCell
0~17
None
None
UtranRanShare
0~16383
None
None
UtranRanShare
000~999
None
None
UtranRanShare
00~99,000~999
None
None
UtranRanShare
NOT_CFG, CFG
UtranRanShare
0~7
UtranRanShare
0~17
None
None
UtranNFreq
0~16383
None
None
UtranNFreq
R99, HSDPA, HSUPA, HSPA
HSUPA
HSUPA
Engineering Design UtranNFreq
UTRAN_FDD
UTRAN_FDD
UtranNFreq
NOT_CFG, CFG
Default/Recommen UtranNFreq ded Value
0~16383
None
UtranNFreq
NOT_CFG, CFG
0~7
UtranNFreq
-50~33
33
33
-15~15
-24~0
-22
-22
-119~-25, step:2
-58
-58
0~62, step:2
0~62, step:2
0~31
0~31
LOW_PRIORITY, HIGH_PRIORITY
HIGH_PRIORITY(H HIGH_PRIORITY(H Engineering Design UtranNFreq igh Priority) igh Priority)
LOW_PRIORITY, HIGH_PRIORITY
HIGH_PRIORITY(H HIGH_PRIORITY(H Engineering Design UtranNFreq igh Priority) igh Priority)
000~999
None
None
UtranExternalCell
00~99,000~999
None
None
UtranExternalCell
0~268435455
None
None
UtranExternalCell
UTRAN_FDD
UTRAN_FDD
Engineering Design UtranExternalCell
0~16383
None
None
UtranExternalCell
NOT_CFG, CFG
Default/Recommen UtranExternalCell ded Value
0~16383
None
UtranExternalCell
0~4095
None
None
UtranExternalCell
NOT_CFG, CFG
Default/Recommen UtranExternalCell ded Value
0~255
None
UtranExternalCell
0~511
None
None
UtranExternalCell
1~65533,65535
None
None
UtranExternalCell
0~99 characters
NULL
None
Engineering Design UtranExternalCell
BOOLEAN_FALSE, BOOLEAN_FALSE( BOOLEAN_FALSE( Default/Recommen UtranExternalCell BOOLEAN_TRUE False) False) ded Value
0~100
80
80
Engineering Design ANR
0~100
1~10000
200
200
1~10080
1440
1440
r64(64)
r64(64)
5120ms
1~10080
60
60
-130~-70
-102
-102
1~200
1~200
1~10000
20
20
1~10000
20
20
FREE, CONTROLLED
FREE(FREE)
FREE
1~50400
10080
10080
1~10000
200
200
OFF, ON
OFF(Off)
OFF(Off)
00:00:00~23:59:59
14:00:00
14:00:00
Default/Recommen ANR ded Value
00:00:00~23:59:59
15:00:00
15:00:00
Default/Recommen ANR ded Value
-120~-25
-106
-106
-110~-48
-103
-103
-31.5~0, step:0.5
-30
-30
-31.5~0, step:0.5
-16
-16
BOOLEAN_FALSE, BOOLEAN_FALSE( None BOOLEAN_TRUE False)
Engineering Design CellIdPrdUpt
2000-0101T00:00:00.00000:00~2099-1231T23:59:59.00000:00
2000-0101T00:00:00.00000:00
None
1~365
None
IntraFreqCoverHoS witch, InterFreqCoverHoS witch, UtranCsfbSwitch, GeranCsfbSwitch, Cdma1xRttCsfbSwit ch, UtranServiceHoSwit ch, GeranServiceHoSwi tch, CdmaHrpdServiceH oSwitch, Cdma1xRttService HoSwitch, UlQualityInterRATH oSwitch, InterPlmnHoSwitch, UtranFlashCsfbSwit ch, GeranFlashCsfbSwi tch, ServiceBasedInterF reqHoSwitch, UlQualityInterFreqH oSwitch
IntraFreqCoverHoS witch:On, InterFreqCoverHoS witch:On, UtranCsfbSwitch:Of f, GeranCsfbSwitch:O ff, Cdma20001xRttCsf bSwitch:Off, UtranServiceHoSwit ch:Off, GeranServiceHoSwi tch:Off, Cdma2000HrpdSer viceHoSwitch:Off, Cdma20001xRttSer viceHoSwitch:Off, UlQualityInterRATH oSwitch:Off, InterPlmnHoSwitch: Off, UtranFlashCsfbSwit ch:Off, GeranFlashCsfbSwi tch:Off, ServiceBasedInterF reqHoSwitch:Off, UlQualityInterFreqH oSwitch:Off
IntraFreqCoverHoS witch:On InterFreqCoverHoS witch:On UtranCsfbSwitch:Of f GeranCsfbSwitch:O ff Cdma1xRttCsfbSwit ch:Off UtranServiceHoSwit ch:Off GeranServiceHoSwi tch:Off Cdma2000HrpdSer Engineering Design ENodeBAlgoSwitch viceHoSwitch:Off Cdma20001xRttSer viceHoSwitch:Off UlQualityInterRATH oSwitch:Off InterPlmnHoSwitch: Off UtranFlashCsfbSwit ch:Off GeranFlashCsfbSwi tch:Off ServiceBasedInterF reqHoSwitch:Off UlQualityInterFreqH oSwitch:Off
EutranVoipCapSwit ch, UtranVoipCapSwitc h, GeranVoipCapSwitc h, Cdma1xRttVoipCap Switch, UtranPsHoSwitch, GeranPsHoSwitch, CdmaHrpdNonOtpi misedHoSwitch, CdmaHrpdOptimise dHoSwitch, GeranNaccSwitch, GeranCcoSwitch, UtranSrvccSwitch, GeranSrvccSwitch, Cdma1xRttSrvccSw itch, UtranRedirectSwitc h, GeranRedirectSwitc h, CdmaHrpdRedirect Switch, Cdma1xRttRedirect Switch, BlindHoSwitch
EutranVoipCapSwit ch:On, UtranVoipCapSwitc h:Off, GeranVoipCapSwitc h:Off, Cdma1xRttVoipCap Switch:Off, UtranPsHoSwitch:O ff, GeranPsHoSwitch: Off, CdmaHrpdNonOtpi misedHoSwitch:Off, CdmaHrpdOptimise dHoSwitch:Off, GeranNaccSwitch: Off, GeranCcoSwitch:Of f, UtranSrvccSwitch:O ff, GeranSrvccSwitch: Off, Cdma1xRttSrvccSw itch:Off, UtranRedirectSwitc h:Off, GeranRedirectSwitc h:Off, CdmaHrpdRedirect Switch:Off, Cdma1xRttRedirect Switch:Off,
EutranVoipCapSwit ch:On UtranVoipCapSwitc h:Off GeranVoipCapSwitc h:Off Cdma1xRttVoipCap Switch:Off UtranPsHoSwitch:O ff GeranPsHoSwitch: Off CdmaHrpdNonOtpi misedHoSwitch:Off CdmaHrpdOptimise dHoSwitch:Off GeranNaccSwitch: Engineering Design ENodeBAlgoSwitch Off GeranCcoSwitch:Of f UtranSrvccSwitch:O ff GeranSrvccSwitch: Off Cdma1xRttSrvccSw itch:Off UtranRedirectSwitc h:Off GeranRedirectSwitc h:Off CdmaHrpdRedirect Switch:Off Cdma1xRttRedirect Switch:Off
DlIcicSwitch_OFF_ ENUM, DlIcicDynamicSwitc h_ON_ENUM, DlIcicSwitch_OFF_ DlIcicSwitch_OFF_ Engineering Design ENodeBAlgoSwitch DlIcicStaticSwitch_ ENUM ENUM ON_ENUM, DlIcicReuse3Switch _ON_ENUM
IntraRatEventAnrS witch, IntraRatFastAnrSwit ch, IntraRatAnrAutoDel Switch, UtranEventAnrSwitc h, GeranEventAnrSwit ch, UtranFastAnrSwitch , GeranFastAnrSwitc h, CdmaFastAnrSwitc h, UtranAutoNrtDelete Switch, GeranAutoNrtDelet eSwitch, CdmaAutoNrtDelete Switch, ExtendIntraRatAnrS witch
IntraRatEventAnrS witch:Off, IntraRatFastAnrSwit ch:Off, IntraRatAnrAutoDel Switch:On, UtranEventAnrSwitc h:Off, GeranEventAnrSwit ch:Off, UtranFastAnrSwitch :Off, GeranFastAnrSwitc h:Off, CdmaFastAnrSwitc h:Off, UtranAutoNrtDelete Switch:On, GeranAutoNrtDelet eSwitch:On, CdmaAutoNrtDelete Switch:On, ExtendIntraRatAnrS witch:Off
IntraRatEventAnrS witch: Off IntraRatFastAnrSwit ch: Off IntraRatAnrAutoDel Switch: On UtranEventAnrSwitc h: Off GeranEventAnrSwit ch: Off UtranFastAnrSwitch : Off Engineering Design ENodeBAlgoSwitch GeranFastAnrSwitc h: Off CdmaFastAnrSwitc h: Off UtranAutoNrtDelete Switch: On GeranAutoNrtDelet eSwitch: On CdmaAutoNrtDelete Switch: On ExtendIntraRatAnrS witch:Off
LoadBasedSwitch, GeranFlashRedirect Switch, UranFlashRedirectS witch
LoadBasedSwitch: Off, GeranFlashRedirect Switch:Off, UranFlashRedirectS witch:Off
LoadBasedSwitch: Off GeranFlashRedirect Engineering Design ENodeBAlgoSwitch Switch:Off UranFlashRedirectS witch:Off
IntraFreqMroAlgoS witch:Off, IntraFreqMroSwitch, InterFreqMroAlgoS InterFreqMroSwitch, witch:Off, UtranMroSwitch, UtranMroSwitch:Off, GeranMroSwitch GeranMroSwitch:Of f
IntraFreqMroAlgoS witch:Off InterFreqMroAlgoS witch:Off Engineering Design ENodeBAlgoSwitch UtranMroSwitch:Off GeranMroSwitch:Of f
TpeAlgoSwitch
TpeAlgoSwitch:Off
TpeAlgoSwitch:Off
Engineering Design ENodeBAlgoSwitch
UlIcicIntraSwitch
Uplink Intra-eNB ICIC switch:Off
Uplink Intra-eNB ICIC switch:Off
OFF, STATIC, DYNAMIC
OFF(Off)
OFF(Off)
OtdoaSwitch
OTDOA switch:Off
OTDOA switch:Off
Default/Recommen ENodeBAlgoSwitch ded Value
UlUuFlowCtrlSwitch
UU flow control switch:Off
UU flow control switch:Off
OFF, ON
OFF(Off)
OFF(Off)
Default/Recommen ENodeBAlgoSwitch ded Value
SymbolShutdownS Symbol shutdown witch switch:Off
Symbol shutdown switch: Off
UTRAN_RIM_SWIT UTRAN RIM CH, Switch:Off, GERAN GERAN_RIM_SWI RIM Switch:Off TCH
UTRAN RIM Switch:Off GERAN RIM Switch:Off
NBSLTEPLMNRou ndSwitch, NBSLTERANSharin gSwitch
NBSLTEPLMNRou ndSwitch:Off, NBSLTERANSharin gSwitch:Off
NBSLTEPLMNRou ndSwitch:Off Engineering Design ENodeBAlgoSwitch NBSLTERANSharin gSwitch:Off
UtranFreqLayerMea sSwitch, UtranFreqLayerBlin dSwitch
UtranFreqLayerMea sSwitch:Off, UtranFreqLayerBlin dSwitch:Off
UtranFreqLayerMea sSwitch:Off Engineering Design ENodeBAlgoSwitch UtranFreqLayerBlin dSwitch:Off
1~65535
Default/Recommen LICENSEALMTHD ded Value
50~100
100
100
1~65535
49~99
90
90
1~100
25
25
Engineering Design LicRatio
SHARING, DEDICATE
SHARING(Sharing) SHARING(Sharing) Engineering Design LicRatio
0~100
0~100
0~100
0~100
0~100
0~100
0~100
0~100
1~70000
1440
1440
Default/Recommen MRO ded Value
0~100
99
99
0~10000
1000
1000
1~60
0~100
0~100
60
60
-140~-44
-116
-116
-140~-44
-116
-116
0~9
None
None
Engineering Design SimuLoad
0~100
50
50
Default/Recommen SimuLoad ded Value
0~100
50
50
0~50000
500
500
0~50000
5000
5000
OFF, ON
OFF(Off)
OFF(Off)
OFF, ON
OFF(Off)
Engineering Design TcpAckCtrlAlgo
0~4294967295
1~255
0~261120,275943~ 0 307200
Default/Recommen TddFrameOffset ded Value
0~20
Engineering Design TpeAlgo
0~65535
20
20
0~65535
80
80
0~65535
8080
8080
0~65535
0~65535
0~65535
0~65535
0~65535
0~65535
0~65535
0~65535
0~65535
0~65535
0~65535
0~65535
0~65535
0~65535
0~65535
0~65535
0~65535
0~195
None
None
NODETORSCGRP
SGW, X2eNodeB
None
None
NODETORSCGRP
NO, YES
None
None
NODETORSCGRP
0~127
This parameter must be set to the ID of an S-GW or neighboring eNodeB. If the peer device is an S-GW, set this parameter Transport to a value in the Planning(Internal range of 0 to 127. If planning) the peer device is a neighboring eNodeB, set this parameter to a value in the range of 16 to 79.
NODETORSCGRP
0~7
Default/Recommen NODETORSCGRP ded Value
0~1
0~7
None
None
IP
None
None
NODETORSCGRP
0~15
None
None
NODETORSCGRP
BASE_BOARD, E1_COVERBOARD , BACK_BOARD, None ETH_COVERBOAR D
None
NODETORSCGRP
0~15
NODETORSCGRP
PPP, MPGRP, ETH, ETHTRK, TUNNEL
None
None
NODETORSCGRP
1~15 characters
None
None
SonSecPara
1~99
None
None
SonSecPara
1~15 characters
None
None
SonSecPara
X2, S1
X2(X2)
None
SonSecPara
IKE_V1, IKE_V2
IKE_V2(IKE V2)
IKE_V2(IKE V2)
SonSecPara
MAIN, AGGRESSIVE
MAIN(Main Mode)
MAIN(Main Mode)
SonSecPara
0~127 characters
None
None
SonSecPara
DISABLE, PERIODIC
PERIODIC(Periodic PERIODIC )
SonSecPara
10~3600
10
None
Default/Recommen SonSecPara ded Value
3~30
None
3~10
None
DISABLE, PFS_GROUP1, PFS_GROUP2
DISABLE(Disable)
DISABLE
SonSecPara
GLOBAL, LOCAL
LOCAL(Local Configuration)
None
SonSecPara
30~604800
3600
3600
0,1843200~429496 69120000 7295
None
0~3
None
None
SonSecPara
1~15 characters
None
None
MME6
Valid IP address
None
None
Transport Planning(Negotiatio MME6 n with the peer)
The value DISABLE is recommended if the network does not support IPv6 IPsec or an IPv6 IPSec tunnel has Transport already been Planning(Negotiatio MME6 configured to n with the peer) protect the SCTP link set up using the first signaling IPv6 address of the IPv6 MME.
0~15 characters
NULL
None
0~15 characters
NULL
None
Valid IP address
0:0:0:0:0:0:0:0
This parameter is Transport not required if Planning(Negotiatio MME6 SCTP multi-homing n with the peer) is not supported.
The value DISABLE is recommended if the network does not support IPv6 IPsec or an IPv6 IPsec tunnel that is Transport set up by using the Planning(Negotiatio MME6 second signaling n with the peer) IPv6 address of the IPv6 MME has been configured between the eNodeB and the IPv6 MME.
0~15 characters
NULL
None
0~15 characters
NULL
None
1024~65535
None
None
0~20 characters
NULL
None
MME6
0~3
None
0~15
None
None
MME
Valid IP address
None
None
Transport Planning(Negotiatio MME n with the peer)
The value DISABLE is recommended if the network does not support IPSec or an IPSec tunnel Transport has already been Planning(Negotiatio MME configured to n with the peer) protect the SCTP link set up using the first signaling IP address of the MME.
0~15 characters
NULL
None
0~15 characters
NULL
None
Valid IP address
0.0.0.0
This parameter is required only if SCTP multihoming is supported.
The value DISABLE is recommended if the network does not support IPSec or an IPSec tunnel Transport has already been Planning(Negotiatio MME configured to n with the peer) protect the SCTP link set up using the first signaling IP address of the MME.
0~15 characters
NULL
None
0~15 characters
NULL
None
1024~65535
None
None
0~20 characters
NULL
None
MME
0~3
None
0~7
Default/Recommen S1ServIP ded Value
0~1
0~7
None
1~15 characters
None
None
S1ServIP
Valid IP address
None
None
S1ServIP
The value DISABLE is recommended if the network does not support IPSec Transport or an IPSec tunnel Planning(Internal has already been planning) configured to protect the IP path set up using this S1 service IP address.
S1ServIP
Valid IP address
0.0.0.0
None
S1ServIP
DISABLE(Disable)
S1ServIP
0~3
None
S1ServIP
1~15 characters
None
None
S1ServIP6
0~7
Default/Recommen S1ServIP6 ded Value
0~1
0~7
None
Valid IP address
None
None
S1ServIP6
The value DISABLE is recommended if the network does not support IPv6 IPSec or an IPv6 Transport IPSec tunnel has Planning(Internal already been planning) configured to protect the IPv6 path set up using this S1 service IPv6 address.
S1ServIP6
Valid IP address
0:0:0:0:0:0:0:0
None
S1ServIP6
DISABLE(Disable)
S1ServIP6
0~3
None
S1ServIP6
0~7
Default/Recommen S1SigIP ded Value
0~1
0~7
None
1~15 characters
None
None
S1SigIP
Valid IP address
None
None
S1SigIP
The value DISABLE is recommended if the network does not support IPSec or an IPSec tunnel Transport has already been Planning(Internal configured to planning) protect the SCTP link set up using the second S1 signaling IP address of the eNodeB.
S1SigIP
Valid IP address
0.0.0.0
None
S1SigIP
Valid IP address
0.0.0.0
The value 0.0.0.0 is Transport recommended if Planning(Internal SCTP multihoming planning) is not supported.
S1SigIP
The value DISABLE is recommended if the network does not support IPSec or an IPSec tunnel Transport has already been Planning(Internal configured to planning) protect the SCTP link set up using the second S1 signaling IP address of the eNodeB.
S1SigIP
Valid IP address
0.0.0.0
None
S1SigIP
1024~65535
None
None
S1SigIP
10~59999
1000
1000
11~60000
3000
3000
10~59999
1000
1000
1~99
12
12
1~99
25
25
1000~60000
5000
5000
2~254
10
10
1~253
DISABLE(Disable)
DISABLE(Disable)
ALDER32, CRC32
CRC32(CRC32)
CRC32(CRC32)
ENABLE(Enable)
1~254
10
10
10~500
200
200
0~3
None
S1SigIP
1~15 characters
None
None
S1SigIP6
0~7
Default/Recommen S1SigIP6 ded Value
0~1
0~7
None
Valid IP address
None
None
S1SigIP6
The value DISABLE is recommended if the network does not support IPv6 IPsec or an IPv6 IPsec tunnel has Transport already been Planning(Internal configured to planning) protect the IPv6 SCTP link set up using the first S1 signaling IPv6 address of the eNodeB.
S1SigIP6
Valid IP address
0:0:0:0:0:0:0:0
None
S1SigIP6
Valid IP address
0:0:0:0:0:0:0:0
This parameter is Transport not required if Planning(Internal SCTP multi-homing planning) is not supported.
S1SigIP6
The value DISABLE is recommended if the network does not support IPv6 IPsec or an IPv6 IPsec tunnel has Transport already been Planning(Internal configured to planning) protect the IPv6 SCTP link set up using the second S1 signaling IPv6 address of the eNodeB.
S1SigIP6
Valid IP address
0:0:0:0:0:0:0:0
None
S1SigIP6
1024~65535
None
None
S1SigIP6
1000~60000
1000
1000
1000~60000
3000
3000
1000~60000
1000
1000
1~99
12
12
1~99
25
25
1000~60000
5000
5000
2~254
10
10
1~253
DISABLE(Disable)
DISABLE(Disable)
ALDER32, CRC32
CRC32(CRC32)
CRC32(CRC32)
ENABLE(Enable)
1~254
10
10
0~3
None
S1SigIP6
0~127
None
None
SGW
Valid IP address
None
None
Transport Planning(Negotiatio SGW n with the peer)
The value DISABLE is recommended if the network does not support IPSec or an IPSec tunnel Transport has already been Planning(Negotiatio SGW configured to n with the peer) protect the IP path set up using the first service IP address of the S-GW.
0~15 characters
NULL
None
0~15 characters
NULL
None
Valid IP address
0.0.0.0
None
The value DISABLE is recommended if the network does not support IPSec or an IPSec tunnel Transport has already been Planning(Negotiatio SGW configured to n with the peer) protect the IP path set up using the second service IP address of the SGW.
0~15 characters
NULL
None
0~15 characters
NULL
None
Valid IP address
0.0.0.0
None
The value DISABLE is recommended if the network does not support IPSec or an IPSec tunnel Transport has already been Planning(Negotiatio SGW configured to n with the peer) protect the IP path set up using the third service IP address of the SGW.
0~15 characters
NULL
None
0~15 characters
NULL
None
Valid IP address
0.0.0.0
None
The value DISABLE is recommended if the network does not support IPSec or an IPSec tunnel Transport has already been Planning(Negotiatio SGW configured to n with the peer) protect the IP path set up using the fourth service IP address of the SGW.
0~15 characters
NULL
None
0~15 characters
NULL
None
0~20 characters
NULL
None
SGW
0~3
None
1~15 characters
None
None
SGW6
Valid IP address
None
None
Transport Planning(Negotiatio SGW6 n with the peer)
The value DISABLE is recommended if the network does not support IPv6 IPsec or an IPv6 IPsec tunnel has Transport already been Planning(Negotiatio SGW6 configured to n with the peer) protect the IPv6 path set up using the first service IPv6 address of the S-GW.
0~15 characters
NULL
None
0~15 characters
NULL
None
Valid IP address
0:0:0:0:0:0:0:0
None
The value DISABLE is recommended if the network does not support IPv6 IPsec or an IPv6 IPsec tunnel has Transport already been Planning(Negotiatio SGW6 configured to n with the peer) protect the IPv6 path set up using the second service IPv6 address of the IPv6 S-GW.
0~15 characters
NULL
None
0~15 characters
NULL
None
Valid IP address
0:0:0:0:0:0:0:0
None
The value DISABLE is recommended if the network does not support IPv6 IPsec or an IPv6 IPsec tunnel has Transport already been Planning(Negotiatio SGW6 configured to n with the peer) protect the IPv6 path set up using the third service IPv6 address of the IPv6 S-GW.
0~15 characters
NULL
None
0~15 characters
NULL
None
Valid IP address
0:0:0:0:0:0:0:0
None
The value DISABLE is recommended if the network does not support IPv6 IPsec or an IPv6 IPsec tunnel has Transport already been Planning(Negotiatio SGW6 configured to n with the peer) protect the IPv6 path set up using the fourth service IPv6 address of the IPv6 S-GW.
0~15 characters
NULL
None
0~15 characters
NULL
None
0~20 characters
NULL
None
SGW6
0~3
None
0~7
Default/Recommen X2ServIP ded Value
0~1
0~7
None
1~15 characters
None
None
X2ServIP
Valid IP address
None
None
X2ServIP
The value DISABLE is recommended if the network does not support IPSec or an IPSec tunnel Transport has already been Planning(Internal configured to planning) protect the SCTP link set up using the X2 service IP address of the local eNodeB.
X2ServIP
DISABLE(Disable)
X2ServIP
Valid IP address
0.0.0.0
0.0.0.0
X2ServIP
0~15 characters
NULL
None
X2ServIP
0~15 characters
NULL
None
X2ServIP
DISABLE(Disable)
X2ServIP
0~3
None
X2ServIP
0~7
Default/Recommen X2SigIP ded Value
0~1
0~7
None
1~15 characters
None
None
X2SigIP
Valid IP address
None
None
X2SigIP
The value DISABLE is recommended if the network does not support IPSec or an IPSec tunnel Transport has already been Planning(Internal configured to planning) protect the SCTP link set up using the first X2 signaling IP address of the local eNodeB.
X2SigIP
DISABLE(Disable)
X2SigIP
Valid IP address
0.0.0.0
0.0.0.0
X2SigIP
0~15 characters
NULL
None
X2SigIP
0~15 characters
NULL
None
X2SigIP
Valid IP address
0.0.0.0
The value 0.0.0.0 is Transport recommended if Planning(Internal SCTP multihoming planning) is not supported.
X2SigIP
The value DISABLE is recommended if the network does not support IPSec or an IPSec tunnel Transport has already been Planning(Internal configured to planning) protect the SCTP link set up using the second X2 signaling IP address of the local eNodeB.
X2SigIP
DISABLE(Disable)
X2SigIP
Valid IP address
0.0.0.0
None
X2SigIP
0~15 characters
NULL
None
X2SigIP
0~15 characters
NULL
None
X2SigIP
1024~65535
36422
36422
10~59999
1000
1000
11~60000
3000
3000
10~59999
1000
1000
1~99
12
12
1~99
25
25
1000~60000
5000
5000
2~254
10
10
1~253
DISABLE(Disable)
DISABLE(Disable)
ALDER32, CRC32
CRC32(CRC32)
CRC32(CRC32)
ENABLE(Enable)
1~254
10
10
10~500
200
200
0~3
None
X2SigIP
16~79
None
None
X2eNodeB
Valid IP address
None
None
Transport Planning(Negotiatio X2eNodeB n with the peer)
The value DISABLE is recommended if the network does not support IPSec or an IPSec tunnel has already been Transport configured to Planning(Negotiatio X2eNodeB protect the SCTP n with the peer) link set up using the first signaling IP address of the neighboring eNodeB.
DISABLE(Disable)
Valid IP address
0.0.0.0
None
Valid IP address
0.0.0.0
The value DISABLE is recommended if the network does not support IPSec or an IPSec tunnel has already been Transport configured to Planning(Negotiatio X2eNodeB protect the SCTP n with the peer) link set up using the second signaling IP address of the neighboring eNodeB.
DISABLE(Disable)
Valid IP address
0.0.0.0
None
1024~65535
36422
36422
Default/Recommen X2eNodeB ded Value
Valid IP address
0.0.0.0
None
The value DISABLE is recommended if the network does not support IPSec or an IPSec tunnel Transport has already been Planning(Negotiatio X2eNodeB configured to n with the peer) protect the IP path set up using the first service IP address of the neighboring eNodeB.
DISABLE(Disable)
Valid IP address
0.0.0.0
None
Valid IP address
0.0.0.0
None
The value DISABLE is recommended if the network does not support IPSec or an IPSec tunnel has already been Transport configured to Planning(Negotiatio X2eNodeB protect the IP path n with the peer) set up using the second service IP address of the neighboring eNodeB.
DISABLE(Disable)
Valid IP address
0.0.0.0
None
Valid IP address
0.0.0.0
None
The value DISABLE is recommended if the network does not support IPSec or an IPSec tunnel has already been Transport configured to Planning(Negotiatio X2eNodeB protect the IP path n with the peer) set up using the third service IP address of the neighboring eNodeB.
DISABLE(Disable)
Valid IP address
0.0.0.0
Transport Same as the default Planning(Negotiatio X2eNodeB value n with the peer)
Valid IP address
0.0.0.0
None
The value DISABLE is recommended if the network does not support IPSec or an IPSec tunnel has already been Transport configured to Planning(Negotiatio X2eNodeB protect the IP path n with the peer) set up using the fourth service IP address of the neighboring eNodeB.
None
Valid IP address
0.0.0.0
Transport Same as the default Planning(Negotiatio X2eNodeB value n with the peer)
000~999
460
This parameter is set as required.
00~99,000~999
20
0~1048575
Set this parameter to the ID of the neighboring eNodeB. None
Transport Planning(Negotiatio X2eNodeB n with the peer) Transport Planning(Internal planning)
0~20 characters
NULL
X2eNodeB
0~3
None
1~15 characters
None
None
X2ServIP6
0~7
Default/Recommen X2ServIP6 ded Value
0~1
0~7
None
Valid IP address
None
None
X2ServIP6
The value DISABLE is recommended if the network does not support IPv6 IPSec or an IPv6 IPSec tunnel has Transport already been Planning(Internal configured to planning) protect the IPv6 path set up using the X2 service IPv6 address of the local eNodeB.
X2ServIP6
DISABLE(Disable)
X2ServIP6
Valid IP address
0:0:0:0:0:0:0:0
None
X2ServIP6
0~15 characters
NULL
None
X2ServIP6
0~15 characters
NULL
None
X2ServIP6
DISABLE(Disable)
X2ServIP6
0~3
None
X2ServIP6
1~15 characters
None
None
X2SigIP6
0~7
Default/Recommen X2SigIP6 ded Value
0~1
0~7
None
None
Valid IP address
None
None
X2SigIP6
The value DISABLE is recommended if IPv6 IPSec is not used in the network or an IPv6 IPSec Transport tunnel has already Planning(Internal been configured to planning) protect the SCTP link set up using the first X2 signaling IPv6 address of the local eNodeB.
X2SigIP6
The value DISABLE is recommended if IPv6 IPSec is not used in the network or an IPv6 IPSec tunnel has already Transport been configured to Planning(Internal protect the IPv6 planning) SCTP link set up using the first X2 signaling IPv6 address of the local eNodeB.
X2SigIP6
Valid IP address
0:0:0:0:0:0:0:0
0.0.0.0
X2SigIP6
0~15 characters
NULL
None
X2SigIP6
0~15 characters
NULL
None
X2SigIP6
Valid IP address
0:0:0:0:0:0:0:0
X2SigIP6
The value DISABLE is recommended if IPv6 IPSec is not used in the network or an IPv6 IPSec Transport tunnel has already Planning(Internal been configured to planning) protect the SCTP link set up using the second X2 signaling IPv6 address of the local eNodeB.
X2SigIP6
The value DISABLE is recommended if IPv6 IPSec is not used in the network or an IPv6 IPSec tunnel has already Transport been configured to Planning(Internal protect the IPv6 planning) SCTP link set up using the second X2 signaling IPv6 address of the local eNodeB.
X2SigIP6
Valid IP address
0:0:0:0:0:0:0:0
None
X2SigIP6
0~15 characters
NULL
None
X2SigIP6
0~15 characters
NULL
None
X2SigIP6
1024~65535
36422
36422
1000~60000
1000
1000
1000~60000
3000
3000
1000~60000
1000
1000
1~99
12
12
1~99
25
25
1000~60000
5000
5000
2~254
10
10
1~253
DISABLE(Disable)
DISABLE(Disable)
ALDER32, CRC32
CRC32(CRC32)
CRC32(CRC32)
ENABLE(Enable)
1~254
10
10
0~3
None
X2SigIP6
1~15 characters
None
None
X2eNodeB6
Valid IP address
None
None
Transport Planning(Negotiatio X2eNodeB6 n with the peer)
The value DISABLE is recommended if IPv6 IPSec is not used in the network or an IPv6 IPSec tunnel has already Transport been configured to Planning(Negotiatio X2eNodeB6 protect the SCTP n with the peer) link set up using the first signaling IPv6 address of the neighboring IPv6 eNodeB.
The value DISABLE is recommended if IPv6 IPSec is not used in the network or an IPv6 IPSec tunnel has already Transport been configured to Planning(Negotiatio X2eNodeB6 protect the SCTP n with the peer) link set up using the first signaling IPv6 address of the neighboring IPv6 eNodeB.
Valid IP address
0:0:0:0:0:0:0:0
None
Valid IP address
0:0:0:0:0:0:0:0
The value DISABLE is recommended if IPv6 IPSec is not used in the network or an IPv6 IPSec tunnel has already Transport been configured to Planning(Negotiatio X2eNodeB6 protect the SCTP n with the peer) link set up using the second signaling IPv6 address of the neighboring IPv6 eNodeB.
The value DISABLE is recommended if IPv6 IPSec is not used in the network or an IPv6 IPSec tunnel has already Transport been configured to Planning(Negotiatio X2eNodeB6 protect the SCTP n with the peer) link set up using the second signaling IPv6 address of the neighboring IPv6 eNodeB.
Valid IP address
0:0:0:0:0:0:0:0
None
1024~65535
36422
36422
Default/Recommen X2eNodeB6 ded Value
Valid IP address
0:0:0:0:0:0:0:0
None
The value DISABLE is recommended if the network does not support IPv6 IPSec or an IPv6 IPSec tunnel has Transport already been Planning(Negotiatio X2eNodeB6 configured to n with the peer) protect the IPv6 path set up using the first service IPv6 address of the neighboring IPv6 eNodeB.
DISABLE(Disable)
Valid IP address
0:0:0:0:0:0:0:0
None
Valid IP address
0:0:0:0:0:0:0:0
None
The value DISABLE is recommended if the network does not support IPv6 IPSec or an IPv6 IPSec tunnel has Transport already been Planning(Negotiatio X2eNodeB6 configured to n with the peer) protect the IPv6 path set up using the second service IPv6 address of the neighboring IPv6 eNodeB.
DISABLE(Disable)
Valid IP address
0:0:0:0:0:0:0:0
None
Valid IP address
0:0:0:0:0:0:0:0
None
The value DISABLE is recommended if the network does not support IPv6 IPSec or an IPv6 IPSec tunnel has Transport already been Planning(Negotiatio X2eNodeB6 configured to n with the peer) protect the IPv6 path set up using the third service IPv6 address of the neighboring IPv6 eNodeB.
DISABLE(Disable)
Valid IP address
0:0:0:0:0:0:0:0
Transport Same as the default Planning(Negotiatio X2eNodeB6 value n with the peer)
Valid IP address
0:0:0:0:0:0:0:0
None
The value DISABLE is recommended if the network does not support IPv6 IPSec or an IPv6 IPSec tunnel has Transport already been Planning(Negotiatio X2eNodeB6 configured to n with the peer) protect the IPv6 path set up using the fourth service IPv6 address of the neighboring IPv6 eNodeB.
None
Valid IP address
0:0:0:0:0:0:0:0
Transport Same as the default Planning(Negotiatio X2eNodeB6 value n with the peer)
000~999
460
00~99,000~999
20
None
0~1048575
Set this parameter Transport to the ID of the peer Planning(Negotiatio X2eNodeB6 eNodeB. n with the peer) Transport Planning(Internal planning)
0~20 characters
NULL
None
X2eNodeB6
0~3
None
1~127 characters
None
None
CA
1~128 characters
None
None
CA
SHA1, SHA256
SHA1(SHA1)
SHA1(SHA1)
CA
ESN, MAC, IP
ESN(ESN)
ESN(ESN)
CERTREQ
0~32 characters
NULL
None
CERTREQ
0~0,2~2 characters NULL
None
CERTREQ
0~64 characters
NULL
None
CERTREQ
0~64 characters
NULL
None
CERTREQ
0~128 characters
NULL
None
CERTREQ
0~128 characters
NULL
None
CERTREQ
DATA_ENCIPHER MENT, DIGITAL_SIGNATU RE, KEY_AGREEMENT , KEY_ENCIPHERM ENT
DATA_ENCIPHER MENT:1, DIGITAL_SIGNATU RE:1, KEY_AGREEMENT :1, KEY_ENCIPHERM ENT:1
DATA_ENCIPHER MENT:1, DIGITAL_SIGNATU Transport RE:1, Planning(Internal KEY_AGREEMENT planning) :1, KEY_ENCIPHERM ENT:1
CERTREQ
SHA1, MD5, SHA256
SHA1(SHA1)
SHA1(SHA1)
CERTREQ
KEYSIZE1024, KEYSIZE2048
Transport KEYSIZE2048(KEY KEYSIZE2048(KEY Planning(Internal SIZE2048) SIZE2048) planning)
CERTREQ
0~128 characters
NULL
None
CERTREQ
Valid IP address
0.0.0.0
None
Transport Planning(Negotiatio CERTREQ n with the peer)
1~64 characters
None
None
CERTMK
0~128 characters
None
None
N/A
CERTMK
0~128 characters
None
None
N/A
CERTMK
0~128 characters
None
None
N/A
CERTMK
0~128 characters
None
None
N/A
CERTMK
0~128 characters
None
None
N/A
CERTMK
IKE, SSL
None
None
APPCERT
1~64 characters
None
None
APPCERT
0~128 characters
None
None
N/A
APPCERT
0~128 characters
None
None
N/A
APPCERT
0~128 characters
None
None
N/A
APPCERT
0~128 characters
None
None
N/A
APPCERT
0~15 characters
NULL
None
APPCERT
0~128 characters
None
None
N/A
APPCERT
NORMALLY, ABNORMALITY, FILENOTEXIST
None
None
N/A
APPCERT
IKE, SSL
None
None
N/A
APPCERT
1~64 characters
None
None
CROSSCERT
0~128 characters
None
None
N/A
CROSSCERT
0~128 characters
None
None
N/A
CROSSCERT
0~128 characters
None
None
N/A
CROSSCERT
0~128 characters
None
None
N/A
CROSSCERT
None
None
N/A
CROSSCERT
0~128 characters
None
None
N/A
CROSSCERT
1~64 characters
None
None
TRUSTCERT
0~128 characters
None
None
N/A
TRUSTCERT
0~128 characters
None
None
N/A
TRUSTCERT
0~128 characters
None
None
N/A
TRUSTCERT
0~128 characters
None
None
N/A
TRUSTCERT
None
None
N/A
TRUSTCERT
0~128 characters
None
None
N/A
TRUSTCERT
1~64 characters
None
None
CRL
NORMAL, CERTLOSS, CERTDAMAGE, None UNKNOWFORMAT , FAILED
None
N/A
CRL
None None
None None
N/A N/A
CRL CRL
0~128 characters
None
None
N/A
CRL
Valid IP address
None
None
CRLTSK
0~255 characters
NULL
None
Transport Planning(Internal planning) Transport Planning(Internal planning)
CRLTSK
0~255 characters
NULL
None
CRLTSK
0~65535
389
389
CRLTSK
1~64 characters
None
None
CRLTSK
DISABLE(Disable)
CRLTSK
8~240
24
24
CRLTSK
0~3
None
None
CRLTSK
FTP, LDAP
FTP(FTP)
FTP(FTP)
CRLTSK
0~255 characters
NULL
None
CRLTSK
ENABLE(Enable)
CERTCHKTSK
1~15
Default/Recommen CERTCHKTSK ded Value
7~180
30
30
Default/Recommen CERTCHKTSK ded Value
PROXY, CMP
PROXY(PROXY)
PROXY(PROXY)
CERTCHKTSK
NOVERIFY, ALARM, DISCONNECT
NOVERIFY(No Verifying)
NOVERIFY(No Verifying)
CRLPOLICY
3000~4999
None
None
ACL
0~127 characters
None
None
ACL
3000~3999
None
None
ACL6
0~127 characters
None
None
Transport Planning(Internal planning) Transport Planning(Internal planning) Transport Planning(Internal planning)
ACL6
3000~4999
None
None
ACLRULE
1~65535
None
None
ACLRULE
DENY, PERMIT
PERMIT(Permit)
PERMIT(Permit)
ACLRULE
IP, ICMP, TCP, UDP, SCTP
None
None
ACLRULE
Valid IP address
None
None
Transport Planning(Negotiatio ACLRULE n with the peer)
Valid wildcard of the None IP address
None
NO, YES
None
None
OP_LT, OP_GT, OP_EQ, OP_NEQ, None OP_RANGE
None
ACLRULE
0~65535
None
None
ACLRULE
0~65535
None
None
ACLRULE
Valid IP address
None
None
Valid wildcard of the None IP address
None
NO, YES
None
None
None
ACLRULE
0~65535
None
None
ACLRULE
0~65535
None
None
ACLRULE
NO, YES
NO(No)
NO(No)
0~63
None
None
ACLRULE
NO, YES
NO(No)
NO(No)
OP_EQ, OP_RANGE
None
None
ACLRULE
1~4094
None
None
ACLRULE
1~4094
None
None
ACLRULE
3000~3999
None
None
ACLRULE6
1~65535
None
None
ACLRULE6
DENY, PERMIT
PERMIT(Permit)
PERMIT(Permit)
ACLRULE6
IP6, TCP, UDP, ICMP6, SCTP
None
None
ACLRULE6
Valid IP address
None
None
Transport Planning(Negotiatio ACLRULE6 n with the peer)
0~128
None
None
NO, YES
None
None
None
0~65535
None
None
0~65535
None
None
Valid IP address
None
None
0~128
None
None
NO, YES
None
None
None
ACLRULE6
0~65535
None
None
ACLRULE6
0~65535
None
None
ACLRULE6
NO, YES
NO(No)
NO(No)
0~63
None
None
ACLRULE6
0~7
Default/Recommen BFDSESSION ded Value
0~1
0~7
None
None
BFDSESSION
0~95
None
None
BFDSESSION
Valid IP address
None
None
Transport Planning(Negotiatio BFDSESSION n with the peer)
Valid IP address
None
None
Transport Planning(Negotiatio BFDSESSION n with the peer)
SINGLE_HOP, MULTI_HOP
None
None
BFDSESSION
10~1000
100
100
10~1000
100
100
3~10
MAINTENANCE, RELIABILITY
RELIABILITY(Relia RELIABILITY(Relia Default/Recommen BFDSESSION bility) bility) ded Value
0~63
48
48
NO, YES
NO(No)
NO(No)
N/A
BFDSESSION
ADMINDOWN, DOWN, INIT, UP
None
None
N/A
BFDSESSION
DEMAND_MODE, ASYNCHRONOUS None _MODE
None
N/A
BFDSESSION
10~1000
None
None
N/A
BFDSESSION
10~1000
None
None
N/A
BFDSESSION
0~4294967295
None
None
N/A
BFDSESSION
0~4294967295
None
None
N/A
BFDSESSION
0~4294967295
None
None
N/A
BFDSESSION
0~4294967295
None
None
N/A
BFDSESSION
0~4294967295
None
None
N/A
BFDSESSION
0~4294967295
None
None
N/A
BFDSESSION
NO_DIAGNOSTIC, CTRL_DECT_TIME _EXPIRED, ECHO_FUNC_FAIL ED, NEIGHBOR_SIG_S ESSION_DOWN, FORDWARDING_P LANE_RESET, None PATH_DOWN, CONCATENATED_ PATH_DOWN, ADMIN_DOWN, REVERSE_CONCA TENTATED_PATH _DOWN, PEER_ADMIN_DO WN
None
N/A
BFDSESSION
0~15
None
None
N/A
BFDSESSION
DRAFT4, STANDARD
Transport DRAFT4(DRAFT4) DRAFT4(DRAFT4) Planning(Internal planning)
BFDSESSION
DEFAULT, SPECIFIC
DEFAULT(Default) None
Default/Recommen CERTDEPLOY ded Value
0~7
None
0~1
None
0~7
None
1~43 characters
None
Digits 0 to 9 and letters a to z and A to Z are recommended.
CFMBNDIP
1~43 characters
None
Digits 0 to 9 and letters a to z and A to Z are recommended.
CFMBNDIP
1~8191
None
None
Transport Planning(Negotiatio CFMBNDIP n with the peer)
Valid IP address
None
None
CFMBNDIP
1~43 characters
None
Digits 0 to 9 and letters a to z and A Transport to Z are Planning(Internal recommended for planning) the MDNAME value of a CFM MA.
CFMMA
1~43 characters
None
Digits 0 to 9 and letters a to z and A Transport to Z are Planning(Internal recommended for planning) the MANAME value of a CFM MA.
CFMMA
0~7
Default/Recommen CFMMA ded Value
0~1
Default/Recommen CFMMA ded Value Transport Planning(Internal planning) Transport Planning(Internal planning) Transport Planning(Internal planning)
0~7
None
None
CFMMA
NO, YES
YES(Yes)
YES(Yes)
CFMMA
1~4094
None
CFMMA
0~7
CFMMA
10ms, 100ms, 1s, 10s, 1min, 10min
1s(1s)
1s(1s)
Default/Recommen CFMMA ded Value
0~32
None
None
N/A
CFMMA
0~64
None
None
N/A
CFMMA
0~4294967295 0~4294967295
None None
None None
N/A N/A
CFMMA CFMMA
1~43 characters
None
Digits 0 to 9 and letters a to z and A Transport to Z are Planning(Internal recommended for planning) the MDNAME value of a CFM MD.
CFMMD
0~7
Default/Recommen CFMMD ded Value
0~4294967295
None
None
N/A
CFMMD
None
None
None
N/A
CFMMD
1~43 characters
None
Digits 0 to 9 and letters a to z and A Transport to Z are Planning(Internal recommended for planning) the MDNAME value of a CFM MEP.
CFMMEP
1~43 characters
None
Digits 0 to 9 and letters a to z and A Transport to Z are Planning(Internal recommended for planning) the MANAME value of a CFM MEP.
CFMMEP
1~8191
None
None
CFMMEP
0~7
Default/Recommen CFMMEP ded Value
0~1
Default/Recommen CFMMEP ded Value Transport Planning(Internal planning)
0~7
None
None
CFMMEP
BASE_BOARD, ETH_COVERBOAR None D
None
CFMMEP
ETH, ETHTRK
None
None
CFMMEP
0~5
None
None
CFMMEP
DISABLE(Disable)
CFMMEP
NO, YES
YES(Yes)
YES(Yes)
N/A
CFMMEP
1~4094
None
None
N/A
CFMMEP
0~7
N/A
CFMMEP
0~4294967295
None
None
N/A
CFMMEP
0~4294967295
None
None
N/A
CFMMEP
0~4294967295
None
None
N/A
CFMMEP
0~4294967295
None
None
N/A
CFMMEP
0~4294967295
None
None
N/A
CFMMEP
0~4294967295
None
None
N/A
CFMMEP
0~4294967295
None
None
N/A
CFMMEP
0~4294967295
None
None
N/A
CFMMEP
0~4294967295
None
None
N/A
CFMMEP
0~4294967295
None
None
N/A
CFMMEP
1~43 characters
None
Digits 0 to 9 and letters a to z and A Transport to Z are Planning(Internal recommended for planning) the MDNAME value of a CFM RMEP.
CFMRMEP
1~43 characters
None
Digits 0 to 9 and letters a to z and A Transport to Z are Planning(Internal recommended for planning) the MANAME value of a CFM RMEP.
CFMRMEP
1~8191
None
None
Transport Planning(Negotiatio CFMRMEP n with the peer)
14 characters
0000-0000-0000
None
CFMRMEP
NORMAL, FAULT
None
None
N/A
CFMRMEP
14 characters
None
None
N/A
CFMRMEP
NO, YES
NO(No)
NO(No)
N/A
CFMRMEP
0~4294967295
None
None
N/A
CFMRMEP
0~4294967295
None
None
N/A
CFMRMEP
0~4
None
None
N/A
CFMRMEP
Valid IP address
None
None
N/A
CFMRMEP
TCP, UDP
None
None
DBGSVR
22, 23, 67, 68, 80, 319, 320, 443, 500, 1110, 1120, 2700, 3784, 4443, 4500, None 4784, 6000, 6001, 6006, 6007, 17185, 30023, 33003, 45300
None
DBGSVR
None
DBGSVR
0~7
Default/Recommen DEVIP ded Value
0~1
Default/Recommen DEVIP ded Value Transport Planning(Internal planning)
0~7
None
None
DEVIP
BASE_BOARD, E1_COVERBOARD , None ETH_COVERBOAR D
None
DEVIP
PPP, MPGRP, ETH, ETHTRK, LOOPINT
None
None
DEVIP
0~15
None
None
DEVIP
Valid IP address
None
None
DEVIP
Valid Mask address None
None
DEVIP
1~65535
None
None
DEVIP6
Valid IP address
None
None
DEVIP6
1~128
None
None
DEVIP6
IP6_DAD_OK, IP6_DAD_TENTATI VE, IP6_DAD_DUPLIC None ATED, IP6_DAD_UNKNO W
None
N/A
DEVIP6
0~4294967295
None
None
N/A
DEVIP6
0~4294967295
None
None
N/A
DEVIP6
Transport ENABLE(ENABLE) Planning(Internal planning)
DHCPRELAYSWIT CH
Valid IP address
None
None
DHCPSVRIP
ENABLE(Enable)
Transport Planning(Negotiatio DHCPSW n with the peer)
IPPRECEDENCE, DSCP
DSCP(DSCP)
DSCP(DSCP)
Default/Recommen DIFPRI ded Value
0~63
46
46
0~63
46
46
0~63
14
14
0~63
46
46
0~63
46
46
HQ, LQ
HQ(High Quality)
HQ(High Quality)
0~100
100
100
0~1000
0~63
26
26
HQ, LQ
HQ(High Quality)
HQ(High Quality)
0~100
100
100
0~1000
0~63
34
34
HQ, LQ
HQ(High Quality)
HQ(High Quality)
0~100
100
100
0~1000
0~63
26
26
HQ, LQ
HQ(High Quality)
HQ(High Quality)
0~100
100
100
0~1000
0~63
46
46
HQ, LQ
HQ(High Quality)
HQ(High Quality)
0~100
100
100
0~1000
0~63
18
18
HQ, LQ
LQ(Low Quality)
LQ(Low Quality)
0~100
30
30
0~1000
100
100
0~63
18
18
HQ, LQ
LQ(Low Quality)
LQ(Low Quality)
0~100
30
30
0~1000
100
100
0~63
10
10
HQ, LQ
LQ(Low Quality)
LQ(Low Quality)
0~100
30
30
0~1000
100
100
0~63
HQ, LQ
LQ(Low Quality)
LQ(Low Quality)
0~100
30
30
0~1000
100
100
OFF, ON
ON(On)
ON(On)
Engineering Design DLITFCALG
OFF, ON
ON(On)
ON(On)
Engineering Design DLITFCALG
0~7
None
Default/Recommen DOT1X ded Value
0~1
None
Default/Recommen DOT1X ded Value
0~7
None
None
DOT1X
None
DOT1X
0~5
None
None
DOT1X
EAP-TLS
Transport EAP-TLS(EAP-TLS EAP-TLS(EAP-TLS Planning(Internal authentic method) authentic method) planning)
DOT1X
0~4294967295
None
None
N/A
DOT1X
0~4294967295
None
None
N/A
DOT1X
NULL, LIC_OFF, NOTIFY_FAIL, NO_CERT, PORT_DOWN
None
None
N/A
DOT1X
0~4294967295
None
None
N/A
DOT1X
UNAUTHENTICAT ED, AUTHENTICATING , AUTHENTIC_SUC None CEED, AUTHENTIC_FAIL, DHCP_AUTHENTI CATING
None
N/A
DOT1X
0~4294967295
None
None
N/A
DOT1X
0~4294967295
None
None
N/A
DOT1X
0~63
None
DSCPMAP
0~7
None
DSCPMAP
0~7
Default/Recommen E1T1 ded Value
0~1
0~7
None
None
E1T1
0~7,255
255
None
E1T1
ALLPORT, SINGLEPORT
Transport ALLPORT(All Ports) ALLPORT(All Ports) Planning(Internal planning)
E1T1
E1_UNBA, E1_BA, E1_UNBA(E1 T1 Unbalance)
E1_UNBA(E1 Unbalance)
E1T1
E1_DOUBLE_FRA ME, E1_CRC4_MULTI_ FRAME, None T1_SUPER_FRAM E, T1_EXTENDED_S UPER_FRAME
E1_CRC4_MULTI_ Transport FRAME(E1 CRC4 Planning(Internal Multiple Frames) planning)
E1T1
HDB3, AMI, B8ZS
None
If an E1/T1 port is carried over IP, the Transport AMI line coding Planning(Internal mode is not planning) recommended.
E1T1
MASTER, SLAVE
SLAVE(Slave Mode)
SLAVE(Slave Mode)
OK, LOCAL_LOOP, REMOTE_LOOP, PAYLOAD_LOOP, SINGLE_CH_LOO P, LOS, AIS, LFA, None RA, LMFA, SLIP, OTHERS, BACKUP, PHYSICAL_LOOP
None
N/A
E1T1
EXECUTELINKTES TFlAG_0, EXECUTELINKTES None TFlAG_1, EXECUTELINKTES TFlAG_2
None
N/A
E1T1
NO, YES
None
None
N/A
E1T1
0~720
None
None
N/A
E1T1
BASE_BOARD, None E1_COVERBOARD
None
E1T1
E1_UNBA, E1_BA, None T1, UNKNOWN
None
N/A
E1T1
E1_DOUBLE_FRA ME, E1_CRC4_MULTI_ FRAME, T1_SUPER_FRAM E, None T1_EXTENDED_S UPER_FRAME, E1_MODIFY_CRC4 _MULTIFRAME, UNKNOWN
None
N/A
E1T1
HDB3, AMI, B8ZS, UNKNOWN
None
None
N/A
E1T1
1E-3, 1E-4, 1E-5, 1E-6
1E-5(1E-5)
1E-5(1E-5)
Default/Recommen E1T1BER ded Value
0~7
Default/Recommen ETHOAM3AH ded Value
0~1
0~7
None
None
ETHOAM3AH
None
ETHOAM3AH
ETH
None
None
ETHOAM3AH
0~5
None
None
ETHOAM3AH
PASSIVE, ACTIVE
ACTIVE(Active Mode)
ACTIVE(Active Mode)
10,20,50,100,200,5 1000 00,1000
1000
64~1518
128
128
ENABLE(Enable)
ENABLE(Enable)
Default/Recommen ETHOAM3AH ded Value Default/Recommen ETHOAM3AH ded Value
1~60
1~65535
10~900
60
60
1~900
OAM3AH_SESSIO N_IDLE, OAM3AH_SESSIO N_DISCOVER, OAM3AH_SESSIO None N_DETECT, OAM3AH_SESSIO N_LB_LOCAL, OAM3AH_SESSIO N_LB_REMOTE
None
N/A
ETHOAM3AH
0~4294967295
None
None
N/A
ETHOAM3AH
0~4294967295
None
None
N/A
ETHOAM3AH
0~4294967295
None
None
N/A
ETHOAM3AH
0~4294967295
None
None
N/A
ETHOAM3AH
0~4294967295
None
None
N/A
ETHOAM3AH
0~4294967295
None
None
N/A
ETHOAM3AH
0~4294967295
None
None
N/A
ETHOAM3AH
0~4294967295
None
None
N/A
ETHOAM3AH
0~4294967295
None
None
N/A
ETHOAM3AH
0~4294967295
None
None
N/A
ETHOAM3AH
0~4294967295
None
None
N/A
ETHOAM3AH
0~4294967295
None
None
N/A
ETHOAM3AH
0~7
Default/Recommen ETHPORT ded Value
0~1
0~7
None
None
ETHPORT
None
ETHPORT
0~5
None
None
ETHPORT
COPPER, FIBER, AUTO
None
If an optical fiber is used for transmission, set this parameter to Transport FIBER. Planning(Internal If an electrical cable planning) is used for transmission, set this parameter to COPPER.
ETHPORT
46~1800
1500
1500
10M, 100M, 1000M, AUTO(Automatic AUTO Negotiation)
AUTO(Automatic Negotiation)
FULL, AUTO
FULL(Full Duplex)
AUTO(Automatic Negotiation)
ENABLE(Enable)
CLOSE, OPEN
OPEN(Open)
OPEN(Open)
0~100
10
10
0~100
14 characters
None
None
N/A
ETHPORT
UP, DOWN
None
None
N/A
ETHPORT
NOLOOP, REMOTE, LOCAL, None UNKNOWN
None
N/A
ETHPORT
NO, YES
None
None
N/A
ETHPORT
None
N/A
ETHPORT
0~4294967295
None
None
N/A
ETHPORT
0~4294967295
None
None
N/A
ETHPORT
0~4294967295
None
None
N/A
ETHPORT
0~4294967295
None
None
N/A
ETHPORT
0~4294967295
None
None
N/A
ETHPORT
0~4294967295
None
None
N/A
ETHPORT
0~10
None
None
N/A
ETHPORT
0~4294967295
None
None
N/A
ETHPORT
Valid IP address
None
None
N/A
ETHPORT
FORCE, AUTO
None
None
N/A
ETHPORT
FORCE, AUTO
None
None
N/A
ETHPORT
10M, 100M, 1000M, None AUTO
None
N/A
ETHPORT
HALF, FULL, AUTO None
None
N/A
ETHPORT
FORCE, AUTO, UNKNOWN
None
None
N/A
ETHPORT
10M, 100M, 1000M, None AUTO, UNKNOWN
None
N/A
ETHPORT
HALF, FULL, None AUTO, UNKNOWN
None
N/A
ETHPORT
UP, DOWN
None
None
N/A
ETHPORT
0~7
Default/Recommen ETHTRK ded Value
0~1
0~7
None
None
ETHTRK
0~2
DISABLE, ENABLE
ENABLE(Enable LACP)
ENABLE(Enable LACP)
ENABLE(Enable)
None
ETHTRK
46~1800
1500
1500
UP, DOWN
None
None
N/A
ETHTRK
14 characters
None
None
N/A
ETHTRK
14 characters
None
None
N/A
ETHTRK
0~2
None
None
N/A
ETHTRK
0~7 characters
None
None
N/A
ETHTRK
0~2
None
None
N/A
ETHTRK
0~7 characters
None
None
N/A
ETHTRK
0~4294967295
None
None
N/A
ETHTRK
0~4294967295
None
None
N/A
ETHTRK
0~4294967295
None
None
N/A
ETHTRK
0~4294967295
None
None
N/A
ETHTRK
0~4294967295
None
None
N/A
ETHTRK
0~4294967295
None
None
N/A
ETHTRK
0~4294967295
None
None
N/A
ETHTRK
0~4294967295
None
None
N/A
ETHTRK
0~4294967295
None
None
N/A
ETHTRK
Valid IP address
None
None
N/A
ETHTRK
0~7
Default/Recommen ETHTRKLNK ded Value
0~1
0~7
None
None
ETHTRKLNK
0~2
ETHTRKLNK
0~5
None
None
ETHTRKLNK
0~255
255
255
NO, YES
None
None
ETHTRKLNK
None
ETHTRKLNK
UP, DOWN
None
None
N/A
ETHTRKLNK
14 characters
None
None
N/A
ETHTRKLNK
SHORT, LONG, NULL
None
None
N/A
ETHTRKLNK
SHORT, LONG, NULL
None
None
N/A
ETHTRKLNK
0~4294967295
None
None
N/A
ETHTRKLNK
0~4294967295
None
None
N/A
ETHTRKLNK
10~254
None
None
EXTUDT
0~39
None
None
EXTUDT
0~39
None
None
EXTUDTPARAGRP
0~63
None
None
EXTUDTPARAGRP
0~100
None
EXTUDTPARAGRP
HQ, LQ
None
None
EXTUDTPARAGRP
0~100
None
None
EXTUDTPARAGRP
0~1000
None
None
EXTUDTPARAGRP
ARP, ICMP, TCP, SYN, UDP
None
None
FLOODDEFEND
None
FLOODDEFEND
1~4096
None
If FLDTYPE is set to ARP or SYN, the recommended value is 64. If FLDTYPE is set to Transport ICMP, the Planning(Internal recommended planning) value is 128. If FLDTYPE is set to TCP or UDP, the recommended value is 2048.
FLOODDEFEND
None
FLOODDEFEND
1~4096
None
If FLDTYPE is set to ARP or SYN, the recommended value is 32. If FLDTYPE is set to Transport ICMP, the Planning(Internal recommended planning) value is 64. If FLDTYPE is set to TCP or UDP, the recommended value is 1024.
FLOODDEFEND
0~4294967295
None
None
N/A
FLOODDEFEND
0~4294967295
None
None
N/A
FLOODDEFEND
None
Engineering Design GTRANSPARA
SINGLE_RATE, DUAL_RATE
SINGLE_RATE(Sin None gle Rate)
0~1200
30
None
0~31 characters
NULL
None
Transport Planning(Negotiatio IKECFG n with the peer)
0,20~28800
Default/Recommen IKECFG ded Value
0,60~28800
Default/Recommen IKECFG ded Value
0~63
48
None
Transport Planning(Internal planning) N/A
IKECFG
0~7
None
IKECFG
0~1
None
None
N/A
IKECFG
0~7
None
None
N/A
IKECFG
1~15 characters
None
None
IKEPEER
1~99
None
None
IKEPEER
IKE_V1, IKE_V2
IKE_V2(IKE V2)
IKE_V2(IKE_V2)
IKEPEER
MAIN, AGGRESSIVE
MAIN(Main Mode)
MAIN(Main Mode)
IKEPEER
IP, FQDN
None
None
IKEPEER
Valid IP address
None
None
Transport Planning(Negotiatio IKEPEER n with the peer)
0~31 characters
None
None
IKEPEER
0~127 characters
None
None
IKEPEER
DISABLE, PERIODIC
Transport PERIODIC(Periodic PERIODIC(Periodic Planning(Internal ) ) planning)
IKEPEER
10~3600
10
10
Default/Recommen IKEPEER ded Value
3~30
3~10
Valid IP address
0.0.0.0
None
Transport Planning(Negotiatio IKEPEER n with the peer)
0~7
None
N/A
IKEPEER
0~1
None
N/A
IKEPEER
0~7
None
N/A
IKEPEER
1~15 characters
None
None
IKEPEER6
1~99
None
None
IKEPEER6
IKE_V1, IKE_V2
IKE_V2(IKE V2)
IKE_V2(IKE V2)
IKEPEER6
MAIN, AGGRESSIVE
MAIN(Main Mode)
MAIN(Main Mode)
Transport Planning(Negotiatio IKEPEER6 n with the peer)
FQDN, IPV6
None
None
IKEPEER6
Valid IP address
None
None
0~31 characters
None
None
IKEPEER6
0~127 characters
None
None
IKEPEER6
DISABLE, PERIODIC
Transport PERIODIC(Periodic PERIODIC(Periodic Planning(Internal ) ) planning)
IKEPEER6
10~3600
10
10
Default/Recommen IKEPEER6 ded Value
3~30
3~10
Valid IP address
0:0:0:0:0:0:0:0
None
0~7
None
N/A
IKEPEER6
0~1
None
N/A
IKEPEER6
0~7
None
N/A
IKEPEER6
1~99
None
None
IKEPROPOSAL
DES, 3DES, AES128, AES192, AES256
AES128(AES128)
AES128(AES128)
IKEPROPOSAL
MD5, SHA1, AES_XCBC_96
SHA1(SHA1)
SHA1(SHA1)
IKEPROPOSAL
Transport PRE_SHARED_KE PRE_SHARED_KE PRE_SHARED_KE Planning(Internal Y, IKE_RSA_SIG Y(Pre-shared Key) Y(Pre-shared Key) planning)
IKEPROPOSAL
DH_GROUP1, DH_GROUP2, DH_GROUP14, DH_GROUP15
DH_GROUP2(1024- DH_GROUP2(1024- Transport bit Diffie-Hellman bit Diffie-Hellman Planning(Internal Group) Group) planning)
IKEPROPOSAL
60~604800
86400
86400
Default/Recommen IKEPROPOSAL ded Value
HMAC_MD5, HMAC_SHA1, AES128_XCBC
HMAC_SHA1(HMA HMAC_SHA1(HMA Default/Recommen IKEPROPOSAL C_SHA1) C_SHA1) ded Value
0~7
None
N/A
IKEPROPOSAL
0~1
None
N/A
IKEPROPOSAL
0~7
None
N/A
IKEPROPOSAL
0~7
Default/Recommen IP2RSCGRP ded Value
0~1
Default/Recommen IP2RSCGRP ded Value
0~7
None
None
IP2RSCGRP
0~15
IP2RSCGRP
Valid IP address
None
None
Transport Planning(Negotiatio IP2RSCGRP n with the peer)
None
IP2RSCGRP
IP
IP(IP)
None
IP2RSCGRP
None
IP2RSCGRP
None
None
IP2RSCGRP
0~15
IP2RSCGRP
None
IPGUARD
10~1000
120
None
Default/Recommen IPGUARD ded Value
None
IPGUARD
None
IPGUARD
20~200000
2000
None
None
IPGUARD
1~100000
100
None
PPP, MPGRP, ETH, ETHTRK, LOOPINT
None
None
N/A
IPGUARD
0~15 14 characters
None None
None None
N/A N/A
IPGUARD IPGUARD
14 characters
None
None
N/A
IPGUARD
0~4294967295
None
None
N/A
IPGUARD
IPV4, ARP, RARP, IPV6, 802_1X, None LLDP, 1588V2, CFM, LACP, 3AH
None
N/A
IPGUARD
Valid IP address
None
None
N/A
IPGUARD
Valid IP address
None
None
N/A
IPGUARD
ICMP, TCP, UDP, SCTP
None
None
N/A
IPGUARD
0~4294967295
None
None
N/A
IPGUARD
0~4294967295
None
None
N/A
IPGUARD
0~200 characters
None
None
N/A Transport Planning(Internal planning) Transport Planning(Internal planning)
IPGUARD
1~65535
None
None
IPITF6
NORMAL, VLAN
NORMAL(Normal)
NORMAL(Normal)
IPITF6
0~7
Default/Recommen IPITF6 ded Value
0~1
6~7
None
None
IPITF6
BASE_BOARD
None
None
IPITF6
ETH, TRUNK, LOOPIF
None
None
IPITF6
0~5
None
None
IPITF6
1~4094
None
None
IPITF6
1280~1800
1500
None
UP, DOWN
None
None
N/A
IPITF6
Valid IP address
None
None
N/A
IPITF6
0~8
None
None
N/A
IPITF6
Valid IP address
None
None
N/A
IPITF6
0~8
None
None
N/A
IPITF6
Valid IP address
None
None
N/A
IPITF6
None
N/A
IPITF6
0~4294967295
None
None
N/A
IPITF6
0~4294967295
None
None
N/A
IPITF6
0~4294967295
None
None
N/A
IPITF6
None
N/A
IPITF6
None
N/A
IPITF6
0~65535
None
None
IPPATH
0~7
Default/Recommen IPPATH ded Value
0~1
0~7
None
None
IPPATH
None
None
IPPATH
0~15
IPPATH
QOS, ANY
ANY(ANY)
It is recommended that IP Path be set to QOS in a Multiple Spanning Tree Protocol (MSTP) Default/Recommen IPPATH network. In other ded Value scenarios, it is recommended that this parameter is set to ANY.
0~63
None
None
IPPATH
Valid IP address
None
None
Transport Planning(Negotiatio IPPATH n with the peer)
Valid IP address
None
None
Transport Planning(Negotiatio IPPATH n with the peer)
0~79
None
If the IP path belongs to the S1 interface, this parameter is set 0. If the IP path belongs to the X2 interface, this parameter is set from 16 to 79.
IPPATH
HQ, LQ
HQ(High Quality)
HQ(High Quality)
S1, X2
None
S1(S1)
IPPATH
DISABLE(Disable)
0~4294967294
None
None
N/A
IPPATH
0~4294967294
None
None
N/A
IPPATH
0~4294967294
None
None
N/A
IPPATH
0~4294967294
None
None
N/A
IPPATH
0~4294967295
None
None
N/A
IPPATH
0~4294967295
None
None
N/A
IPPATH
NORMAL, FAULT, CHECK_DISABLE D
None
None
N/A
IPPATH
0~15
None
None
IPPATH
0~47 characters
NULL
None
IPPATH
None
IPPATH
DISABLE(Disable)
0~65535
None
None
Transport Planning(Internal planning) Transport Planning(Internal planning) Transport Planning(Internal planning) Transport Planning(Internal planning)
IPPATH6
DISABLE(Disable)
IPPATH6
0~15
None
IPPATH6
1~65535
None
None
IPPATH6
QOS, ANY
None
None
IPPATH6
0~63
None
None
IPPATH6
Valid IP address
None
None
Transport Planning(Negotiatio IPPATH6 n with the peer)
Valid IP address
None
None
Transport Planning(Negotiatio IPPATH6 n with the peer)
0~79
None
If the IPv6 path belongs to the S1 interface, this parameter is set 0. If the IPv6 path belongs to the X2 interface, this parameter is set from 16 to 79.
IPPATH6
S1, X2
None
None
IPPATH6
DISABLE(Disable)
IPPATH6
0~4294967295
None
None
N/A
IPPATH6
0~4294967295
None
None
N/A
IPPATH6
0~4294967295
None
None
N/A
IPPATH6
0~4294967295
None
None
N/A
IPPATH6
0~4294967295
None
None
N/A
IPPATH6
0~4294967295
None
None
N/A
IPPATH6
NORMAL, FAULT, CHECK_DISABLE D
None
None
N/A
IPPATH6
0~47 characters
NULL
None
IPPATH6
Valid IP address
None
None
Transport Planning(Negotiatio IPPATHRT n with the peer)
Valid IP address
None
None
Transport Planning(Negotiatio IPPATHRT n with the peer)
HQ, LQ
None
None
IPPATHRT
Valid IP address
None
None
IPPATHRT
0~65535
None
None
IPPMSESSION
Valid IP address
None
None
Transport Planning(Negotiatio IPPMSESSION n with the peer)
Valid IP address
None
None
Transport Planning(Negotiatio IPPMSESSION n with the peer)
0~63
None
None
IPPMSESSION
UP, BIDIR
UP(Uplink)
UP(Uplink)
IPPMSESSION
0~10000
None
None
N/A
IPPMSESSION
-10000~10000
None
None
N/A
IPPMSESSION
-10000~10000
None
None
N/A
IPPMSESSION
0~1000
None
None
N/A
IPPMSESSION
0~1000
None
None
N/A
IPPMSESSION
IDLE, ACTING, PMUP, DEACTING, None UNKNOWN
None
N/A
IPPMSESSION
IDLE, ACTING, PMUP, DEACTING, None UNKNOWN
None
N/A
IPPMSESSION
FOUR_TUPLE, THREE_TUPLE
FOUR_TUPLE(FO UR_TUPLE)
FOUR_TUPLE(FO UR_TUPLE)
Default/Recommen IPPMSESSION ded Value
NO, YES
NO(No)
NO(No)
Default/Recommen IPPMSESSION ded Value
0~65535
None
None
IPPMSESSION
NO, YES
None
None
N/A
IPPMSESSION
0~4294967295
None
None
N/A
IPPMSESSION
0~4294967295
None
None
N/A
IPPMSESSION
None
None
None
N/A
IPPMSESSION
NO, YES
None
None
N/A
IPPMSESSION
0~4294967295
None
None
N/A
IPPMSESSION
0~4294967295
None
None
N/A
IPPMSESSION
None
None
None
N/A
IPPMSESSION
IPPMVER_V1, IPPMVER_V2
None
None
N/A
IPPMSESSION
0~7
Default/Recommen IPRT ded Value
0~1
Default/Recommen IPRT ded Value
0~7
None
None
IPRT
None
IPRT
PPP, MPGRP, TUNNEL
PPP(PPP Link)
None
IPRT
0~15
IPRT
NEXTHOP, IF
None
None
IPRT
Valid IP address
None
None
Transport Planning(Negotiatio IPRT n with the peer)
None
IPRT
Valid IP address
None
IPRT
1~255
60
60
IPRT
STATICHOST, STATICGATEWAY, None HOST, GATEWAY
None
N/A
IPRT
0~47 characters
NULL
None
IPRT
PPP, MPGRP, ETH, ETHTRK, LOOPINT, VI, TUNNEL
None
None
N/A
IPRT
0~32
None
None
N/A
IPRT
Valid IP address
None
None
Transport Planning(Negotiatio IPRT6 n with the peer)
0~128
None
None
IPRT6
NEXTHOP
NEXTHOP(Next Hop)
NEXTHOP(Next Hop)
IPRT6
IPADDR6_TYPE_G LOBAL_UNICAST, None IPADDR6_TYPE_LI NK_LOCAL
None
IPRT6
Valid IP address
None
None
IPRT6
1~65535
None
IPRT6
1~255
60
60
IPRT6
STATICHOST, STATICGATEWAY, None HOST, GATEWAY
None
N/A
IPRT6
0~47 characters
NULL
None
IPRT6
0~7
Default/Recommen IPSECBIND ded Value
0~1
Default/Recommen IPSECBIND ded Value
0~7
None
None
IPSECBIND
None
IPSECBIND
ETH, ETHTRK
None
None
IPSECBIND
0~5
None
None
IPSECBIND
1~15 characters
None
None
IPSECBIND
1~65535
None
None
IPSECBIND6
1~15 characters
None
None
IPSECBIND6
0~49
None
None
IPSECDTNL
1~15 characters
None
None
IPSECDTNL
1~10000
None
None
IPSECDTNL
1~15 characters
None
None
IPSECDTNL
1~10000
None
None
IPSECDTNL
0~95
None
None
IPSECDTNL
0~95
None
None
IPSECDTNL
MASTER, SLAVE
None
None
N/A
IPSECDTNL
1~15 characters
None
None
IPSECPOLICY
1~10000
None
None
IPSECPOLICY
3000~3999
None
None
IPSECPOLICY
1~15 characters
None
None
IPSECPOLICY
1~15 characters
None
None
IPSECPOLICY
DISABLE(Disable)
DISABLE(Disable)
IPSECPOLICY
GLOBAL, LOCAL
IPSECPOLICY
30~604800
3600
3600
Default/Recommen IPSECPOLICY ded Value
0,1843200~429496 69120000 7295
69120000
0~7
None
N/A
IPSECPOLICY
0~1
None
N/A
IPSECPOLICY
0~7
None
N/A
IPSECPOLICY
WND_DISABLE, WND_32, WND_64, WND_128, WND_256, WND_512, WND_1024, WND_2048, WND_4096
WND_DISABLE(0) None
1~15 characters
None
None
IPSECPOLICY6
1~10000
None
None
IPSECPOLICY6
IPV4, IPV6
None
None
IPSECPOLICY6
3000~3999
None
None
IPSECPOLICY6
3000~3999
None
None
IPSECPOLICY6
1~15 characters
None
None
IPSECPOLICY6
1~15 characters
None
None
IPSECPOLICY6
DISABLE(Disable)
DISABLE(Disable)
IPSECPOLICY6
GLOBAL, LOCAL
IPSECPOLICY6
30~604800
3600
3600
Default/Recommen IPSECPOLICY6 ded Value
0,1843200~429496 69120000 7295
69120000
Default/Recommen IPSECPOLICY6 ded Value
0~7
None
N/A
IPSECPOLICY6
0~1
None
N/A
IPSECPOLICY6
0~7
None
N/A
IPSECPOLICY6
1~15 characters
None
None
IPSECPROPOSAL
TUNNEL, TRANSPORT
TUNNEL(Tunnel)
TUNNEL(Tunnel)
Default/Recommen IPSECPROPOSAL ded Value
Transport AH, ESP, AH_ESP ESP(ESP Protocol) ESP(ESP Protocol) Planning(Internal planning)
IPSECPROPOSAL
MD5, SHA1, AESXCBC-MAC-96, SHA256
SHA1(SHA1)
SHA1(SHA1)
IPSECPROPOSAL
NULL, MD5, SHA1, AES-XCBC-MAC- SHA1(SHA1) 96, SHA256
SHA1(SHA1)
IPSECPROPOSAL
NULL, DES, 3DES, AES128, AES192, AES128(AES128) AES256
AES128(AES128)
IPSECPROPOSAL
0~7
None
N/A
IPSECPROPOSAL
0~1
None
N/A
IPSECPROPOSAL
0~7
None
N/A
IPSECPROPOSAL
None
N/A
LOCALETHPORT
UP, DOWN
None
None
N/A
LOCALETHPORT
0~4294967295
None
None
N/A
LOCALETHPORT
0~4294967295
None
None
N/A
LOCALETHPORT
0~4294967295
None
None
N/A
LOCALETHPORT
0~4294967295
None
None
N/A
LOCALETHPORT
Valid IP address
192.168.0.49
Planned IP address Transport for local Planning(Internal maintenance on a planning) board
LOCALIP
Valid Mask address 255.255.255.0
Planned subnet Transport mask of the local Planning(Internal maintenance planning) channel on a board
LOCALIP
Valid IP address
FE80:0:0:0:2315:E6 None 2F:526:4623
LOCALIP6
1~128
64
None
LOCALIP6
IP6_DAD_OK, IP6_DAD_TENTATI VE, IP6_DAD_DUPLIC None ATED, IP6_DAD_UNKNO W
None
N/A
LOCALIP6
0~4294967295
None
None
N/A
LOCALIP6
0~4294967295
None
None
N/A
LOCALIP6
0~7
Default/Recommen LR ded Value
0~1
Default/Recommen LR ded Value
0~7
None
None
LR
MPGRP, ETH, None ETHTRK, TUNNEL
None
LR
0~5
None
None
LR
DISABLE(Disable)
LR
32~1000000
None
None
LR
32~1000000
None
None
LR
0~1000000
None
None
LR
None
LR
32~1000000
None
The recommended value for this parameter is 31744 if PT is set to Transport MPGRP. Planning(Internal The recommended planning) value is 540000 if PT is set to ETH or ETHTRK.
LR
0~7
Default/Recommen MPGRP ded Value
0~1
0~7
None
None
MPGRP
0~3
None
None
MPGRP
DISABLE(Disable)
NONAUTH, PAP, CHAP
PAP(PAP Authentication)
1~67 characters
None
None
MPGRP
1~19 characters
None
None
MPGRP
Valid IP address
0.0.0.0
None
Transport Planning(Negotiatio MPGRP n with the peer)
None
Valid IP address
0.0.0.0
None
LONG, SHORT
LONG(Long)
LONG(Long)
DISABLE(Disable)
128~1500
256
256
1~512
192
192
3~1500
1500
1500
1~1000
10
10
4,8
None
ENABLE(Enable)
0~1000
100
100
0~1000
50
50
UP, DOWN
None
None
N/A
MPGRP
INITIAL, STARTING, CLOSED, STOPPED, CLOSING, STOPPING, REQSENT, ACKRCVD, ACKSENT, OPENED
None
None
N/A
MPGRP
None
None
N/A
MPGRP
Valid IP address
None
None
N/A
MPGRP
Valid IP address
None
None
N/A
MPGRP
Valid IP address
None
None
N/A
MPGRP
None
N/A
MPGRP
128~1500
None
None
N/A
MPGRP
None
N/A
MPGRP
None
N/A
MPGRP
None
N/A
MPGRP
None
N/A
MPGRP
0~4294967295
None
None
N/A
MPGRP
0~4294967295 0~4294967295 0~4294967295
None None None
None None None
N/A N/A N/A
MPGRP MPGRP MPGRP
0~4294967295
None
None
N/A
MPGRP
Valid IP address
None
None
N/A
MPGRP
None
MPGRP
0~4294967295
None
None
N/A
MPGRP
0~4294967295
None
None
N/A
MPGRP
0~4294967295
None
None
N/A
MPGRP
0~4294967295
None
None
N/A
MPGRP
0~7
Default/Recommen MPLNK ded Value
0~1
0~7
None
None
MPLNK
0~15
MPLNK
0~3
0~1
0~7
None
None
MPLNK
0~7
TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, None TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30, TS31
None
MPLNK
128~1500
1500
1500
ENABLE(Enable)
ENABLE(Enable)
1~65535
3000
3000
None
MPLNK
If SBT is set to BASE_BOARD or BACK_BOARD, you are advised to set MPGRPSBT to BASE_BOARD. Default/Recommen If SBT is set to MPLNK ded Value E1_COVERBOARD , you are advised to set to MPGRPSBT to E1_COVERBOARD . None N/A MPLNK
UP, DOWN
None
None
None
N/A
MPLNK
128~1500
None
None
N/A
MPLNK
None
N/A
MPLNK
None
N/A
MPLNK
None
MPLNK
0~4294967295
None
None
N/A
MPLNK
0~4294967295
None
None
N/A
MPLNK
0~4294967295
None
None
N/A
MPLNK
0~4294967295
None
None
N/A
MPLNK
0~4294967295
None
None
N/A
MPLNK
0~4294967295
None
None
N/A
MPLNK
MASTER, SLAVE
None
None
OMCH
Valid IP address
None
None
Transport Planning(Negotiatio OMCH n with the peer)
Valid IP address
None
None
Valid IP address
None
None
Valid IP address
None
None
0~7
Default/Recommen OMCH ded Value
0~1
Default/Recommen OMCH ded Value
0~7
None
None
OMCH
IPV4
IPV4(IPV4)
None
OMCH
NO, YES
NO(No)
NO(No)
OMCH
Valid IP address
None
None
Valid IP address
None
None
NEXTHOP, IF
NEXTHOP(Next Hop)
None
OMCH
PPP, MPGRP, TUNNEL
None
None
OMCH
0~14
None
None
OMCH
1~255
60
60
OMCH
Valid IP address
None
None
OMCH
NORMAL, ABNORMAL, UNKNOWN
None
None
N/A
OMCH
INUSE, UNUSED
None
None
N/A
OMCH
BASE_BOARD, BACK_BOARD, None ETH_COVERBOAR D
None
OMCH
Valid IP address
None
None
Transport Planning(Negotiatio OMCH6 n with the peer)
Valid IP address
None
None
Transport Planning(Negotiatio OMCH6 n with the peer)
NORMAL, ABNORMAL, UNKNOWN
None
None
N/A
OMCH6
0~7
Default/Recommen PACKETFILTER ded Value
0~1
0~7
None
None
PACKETFILTER
ETH, ETHTRK, TUNNEL
None
None
PACKETFILTER
0~14
None
None
PACKETFILTER
3000~3999
None
None
PACKETFILTER
PERMIT, DENY
PERMIT(Permit)
PERMIT(Permit)
BASE_BOARD, BACK_BOARD, None ETH_COVERBOAR D
None
PACKETFILTER
0~4294967295
None
None
N/A
PACKETFILTER
0~4294967295
None
None
N/A
PACKETFILTER
0~4294967295
None
None
N/A
PACKETFILTER
0~4294967295
None
None
N/A
PACKETFILTER
0~4294967295
None
None
N/A
PACKETFILTER
0~4294967295
None
None
N/A
PACKETFILTER
0~4294967295
None
None
N/A
PACKETFILTER
0~4294967295
None
None
N/A
PACKETFILTER
0~4294967295
None
None
N/A
PACKETFILTER
0~4294967295
None
None
N/A
PACKETFILTER
0~4294967295
None
None
N/A
PACKETFILTER
0~4294967295
None
None
N/A
PACKETFILTER
0~4294967295
None
None
N/A
PACKETFILTER
0~4294967295
None
None
N/A
PACKETFILTER
4000~4999
None
None
PACKETFILTER
ADV_ACL, L2_ACL, ADV_AND_L2
ADV_ACL(Only Advanced ACL)
None
PACKETFILTER
Valid IP address
None
None
PINGFILTER
None
PINGFILTER
PASSIVE, ACTIVE
PASSIVE(Passive Mode)
PASSIVE(Passive Mode)
Default/Recommen PMTUCFG ded Value
49152~65535
52889
52889
500~5000
5000
5000
5~60,65535
65535
65535
0~63
63
63
0~7
Default/Recommen PORTSECURITY ded Value
0~1
Default/Recommen PORTSECURITY ded Value
0~7
None
None
PORTSECURITY
None
PORTSECURITY
ETH, E1T1
Transport ETH(Ethernet Port) ETH(Ethernet Port) Planning(Internal planning)
PORTSECURITY
0~7
None
None
PORTSECURITY
ENABLE(Enable)
PORTSECURITY
0~7
Default/Recommen PPPLNK ded Value
0~1
0~7
None
None
PPPLNK
0~15
None
None
PPPLNK
0~7
None
None
PPPLNK
NONAUTH, PAP, CHAP
1~67 characters
None
None
PPPLNK
1~19 characters
None
None
PPPLNK
TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, None TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30, TS31
None
PPPLNK
Valid IP address
0.0.0.0
None
Transport Planning(Negotiatio PPPLNK n with the peer)
None
Valid IP address
0.0.0.0
None
DISABLE(Disable)
1~512
192
192
3~1500
1500
1500
1~1000
10
10
ENABLE(Enable)
128~1500
1500
1500
ENABLE(Enable)
ENABLE(Enable)
1~65535
3000
3000
UP, DOWN
None
None
N/A
PPPLNK
None
None
N/A
PPPLNK
None
None
N/A
PPPLNK
None
None
N/A
PPPLNK
Valid IP address
None
None
N/A
PPPLNK
Valid IP address
None
None
N/A
PPPLNK
Valid IP address
None
None
N/A
PPPLNK
None
N/A
PPPLNK
None
N/A
PPPLNK
None
N/A
PPPLNK
128~1500
None
None
N/A
PPPLNK
None
N/A
PPPLNK
0~4294967295
None
None
N/A
PPPLNK
0~4294967295
None
None
N/A
PPPLNK
0~4294967295
None
None
N/A
PPPLNK
0~4294967295
None
None
N/A
PPPLNK
0~4294967295
None
None
N/A
PPPLNK
Valid IP address
None
None
N/A
PPPLNK
1~1000
10
10
1~1000
None
PPPLNK
0~4294967295
None
None
N/A
PPPLNK
0~4294967295
None
None
N/A
PPPLNK
0~4294967295
None
None
N/A
PPPLNK
0~4294967295
None
None
N/A
PPPLNK
0~63
46
46
Default/Recommen PRI2QUE ded Value
0~63
34
34
0~63
26
26
0~63
18
18
0~63
10
10
0~63
0~63
0~7
Default/Recommen RSCGRP ded Value
0~1
0~7
None
None
RSCGRP
IP
None
None
RSCGRP
None
RSCGRP
None
None
RSCGRP
0~15
RSCGRP
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, None 14, 15, DEFAULTPORT
None
RSCGRP
KBPS
KBPS(Kbit/s)
None
RSCGRP
32~1000000
None
None
RSCGRP
32~1000000
None
None
RSCGRP
64~1000000
64
The recommended Transport value is twice the Planning(Internal TX bandwidth. planning)
RSCGRP
64~1000000
64
The recommended Transport value is twice the Planning(Internal TX bandwidth. planning)
RSCGRP
0~3
RSCGRP
1~100
100
100
64~1000000
None
None
RSCGRP
64~1000000
None
None
RSCGRP
64~1000000
None
None
RSCGRP
64~1000000
None
None
RSCGRP
64~1000000
None
None
RSCGRP
0~4294967295
None
None
N/A
RSCGRP
0~4294967295
None
None
N/A
RSCGRP
0~4294967295
None
None
N/A
RSCGRP
0~4294967295
None
None
N/A
RSCGRP
0~4294967295
None
None
N/A
RSCGRP
0~4294967295
None
None
N/A
RSCGRP
0~4294967295
None
None
N/A
RSCGRP
0~4294967295
None
None
N/A
RSCGRP
SINGLE_RATE, DUAL_RATE
None
None
N/A
RSCGRP
0~4294967295
None
None
N/A
RSCGRP
0~4294967295
None
None
N/A
RSCGRP
0~4294967295
None
None
N/A
RSCGRP
0~4294967295
None
None
N/A
RSCGRP
0~4294967295
None
None
N/A
RSCGRP
0~4294967295
None
None
N/A
RSCGRP
0~4294967295
None
N/A
RSCGRP
0~7
Default/Recommen RSCGRPALG ded Value
0~1
Default/Recommen RSCGRPALG ded Value
0~7
None
None
RSCGRPALG
None
RSCGRPALG
None
None
RSCGRPALG
0~15
RSCGRPALG
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, None 14, 15, DEFAULTPORT
None
RSCGRPALG
OFF, ON
OFF(Off)
OFF(Off)
Engineering Design RSCGRPALG
OFF, ON
OFF(Off)
OFF(Off)
OFF, ON
OFF(Off)
OFF(Off)
0~1000
30
30
0~10000
50
50
64~1000000
1024
1024
64~1000000
1024
1024
ENABLE(Enable)
DISABLE(Disable)
0~6
0~500
50
50
0~500
25
25
0~1000000
0~1000000
0~8192
1000
1000
0~79
None
None
SCTPLNK
0~7
Default/Recommen SCTPLNK ded Value Default/Recommen SCTPLNK ded Value Transport Planning(Internal planning) SCTPLNK
0~1
0~7
None
None
1~34
17
17
Default/Recommen SCTPLNK ded Value
Valid IP address
None
None
Transport Planning(Negotiatio SCTPLNK n with the peer)
Valid IP address
0.0.0.0
None
1024~65535
None
None
Valid IP address
None
None
Valid IP address
0.0.0.0
None
1024~65535
None
None
10~59999
1000
1000
11~60000
3000
3000
10~59999
1000
1000
1~99
12
12
1~99
25
25
1000~60000
5000
5000
2~254
10
10
1~253
None
None
ALDER32, CRC32
CRC32(CRC32)
None
ENABLE(Enable)
1~254
10
10
SCTP_STAT_DOW N, SCTP_STAT_CON None GESTION, SCTP_STAT_UP
None
N/A
SCTPLNK
SCTP_TRANSFER _CAUSE_START, SCTP_TRANSFER _CAUSE_LINKDO WN, SCTP_TRANSFER _CAUSE_PORTDI SABLED, SCTP_TRANSFER _CAUSE_INIT, None SCTP_TRANSFER _CAUSE_UNKNO WERROR, SCTP_TRANSFER _CAUSE_NORMAL , SCTP_TRANSFER _CAUSE_USERDE LETE
None
N/A
SCTPLNK
None
None
None
N/A
SCTPLNK
0~34
None
None
N/A
SCTPLNK
0~34
None
None
N/A
SCTPLNK
ACTIVE, STANDBY None
None
N/A
SCTPLNK
UNBLOCK, BLOCK
UNBLOCK(Unblock UNBLOCK(Unblock Default/Recommen SCTPLNK ) ) ded Value
10~500
200
200
0~47 characters
NULL
None
0~79
None
None
SCTPLNK6
1~34
17
17
Default/Recommen SCTPLNK6 ded Value
Valid IP address
None
None
Transport Planning(Negotiatio SCTPLNK6 n with the peer)
Valid IP address
0:0:0:0:0:0:0:0
None
1024~65535
None
None
Valid IP address
None
None
Valid IP address
0:0:0:0:0:0:0:0
None
1024~65535
None
None
1000~60000
1000
1000
1000~60000
3000
3000
1000~60000
1000
1000
1~99
12
12
1~99
25
25
1000~60000
5000
5000
2~254
10
10
1~253
ALDER32, CRC32
CRC32(CRC32)
None
ENABLE(Enable)
1~254
10
10
SCTP_STAT_DOW N, SCTP_STAT_CON None GESTION, SCTP_STAT_UP
None
N/A
SCTPLNK6
SCTP_TRANSFER _CAUSE_START, SCTP_TRANSFER _CAUSE_LINKDO WN, SCTP_TRANSFER _CAUSE_PORTDI SABLED, SCTP_TRANSFER _CAUSE_INIT, None SCTP_TRANSFER _CAUSE_UNKNO WERROR, SCTP_TRANSFER _CAUSE_NORMAL , SCTP_TRANSFER _CAUSE_USERDE LETE
None
N/A
SCTPLNK6
None
None
None
N/A
SCTPLNK6
0~34
None
None
N/A
SCTPLNK6
0~34
None
None
N/A
SCTPLNK6
ACTIVE, STANDBY None
None
N/A
SCTPLNK6
UNBLOCK, BLOCK
UNBLOCK(Unblock UNBLOCK(Unblock Default/Recommen SCTPLNK6 ) ) ded Value Transport Planning(Internal planning)
0~47 characters
NULL
None
SCTPLNK6
Valid IP address
None
None
SUBNETVLAN
255.255.255.255
SUBNETVLAN
1~4094
None
None
SUBNETVLAN
OFF, ON
ON(On)
ON(On)
Default/Recommen TACALG ded Value
OFF, ON
ON(On)
ON(On)
0~100
100
100
0~100
100
100
0~100
100
100
0~100
100
100
0~100
0~100
0~100
0~100
0~100
0~100
90
90
0~100
90
90
0~100
85
85
0~100
85
85
0~100
85
85
0~100
85
85
0~100
85
85
0~100
85
85
0~100
100
100
0~100
100
100
OFF, ON
OFF(Off)
OFF(Off)
OFF, ON
OFF(Off)
OFF(Off)
OFF, ON
ON(On)
ON(On)
OFF, ON
ON(On)
ON(On)
OFF, ON
OFF(Off)
OFF(Off)
OFF, ON
OFF(Off)
OFF(Off)
0~100
70
70
Default/Recommen TLDRALG ded Value
0~100
70
70
0~100
65
65
0~100
65
65
0~100
50
50
0~100
50
50
0~100
45
45
0~100
45
45
ENABLE(Enable)
TLFRSWITCH
OFF, ON
ON(On)
ON(On)
Default/Recommen TOLCALG ded Value
OFF, ON
ON(On)
ON(On)
0~100
95
95
0~100
90
90
0~100
0~100
95
95
0~100
90
90
WHITELIST, BLACKLIST
Transport WHITELIST(Whiteli WHITELIST(Whiteli Planning(Internal st) st) planning)
TRANSPORT
0~4294967295
None
None
N/A
TRANSPORT
0~4294967295
None
None
N/A
TRANSPORT
0~4294967295
None
None
N/A
TRANSPORT
0~4294967295
None
None
N/A
TRANSPORT
0~4294967295
None
None
N/A
TRANSPORT
0~4294967295
None
None
N/A
TRANSPORT
0~4294967295
None
None
N/A
TRANSPORT
0~4294967295
None
None
N/A
TRANSPORT
0~4294967295
None
None
N/A
TRANSPORT
0~4294967295
None
None
N/A
TRANSPORT
0~4294967295
None
None
N/A
TRANSPORT
0~4294967295
None
None
N/A
TRANSPORT
0~4294967295
None
None
N/A
TRANSPORT
0~4294967295
None
None
N/A
TRANSPORT
0~4294967295
None
None
N/A
TRANSPORT
0~4294967295
None
None
N/A
TRANSPORT
0~4294967295
None
None
N/A
TRANSPORT
0~4294967295
None
None
N/A
TRANSPORT
0~4294967295
None
None
N/A
TRANSPORT
0~4294967295
None
None
N/A
TRANSPORT
0~4294967295
None
None
N/A
TRANSPORT
0~4294967295
None
None
N/A
TRANSPORT
0~4294967295
None
None
N/A
TRANSPORT
0~4294967295
None
None
N/A
TRANSPORT
0~4294967295
None
None
N/A
TRANSPORT
0~4294967295
None
None
N/A
TRANSPORT
0~4294967295
None
None
N/A
TRANSPORT
0~4294967295
None
None
N/A
TRANSPORT
0~7
None
TUNNEL
0~1
None
TUNNEL
0~7
None
None
TUNNEL
0~14
None
None
TUNNEL
0~7
None
None
TUNNEL
0~1
None
None
TUNNEL
0~7
None
None
TUNNEL
0~4294967295
None
None
N/A
TUNNEL
0~4294967295
None
None
N/A
TUNNEL
0~4294967295
None
None
N/A
TUNNEL
0~4294967295
None
None
N/A
TUNNEL
0~3
None
None
VLANCLASS
USERDATA, SIG, OTHER, OM_HIGH, OM_LOW
None
None
VLANCLASS
0~63
It is recommended that the value of this parameter be Transport consistent with the Planning(Internal implementation of planning) the differentiated service. Transport Planning(Internal planning)
VLANCLASS
1~4094
None
None
VLANCLASS
0~7
VLANCLASS
Valid IP address
None
None
VLANMAP
None
VLANMAP
SINGLEVLAN, VLANGROUP
None
None
VLANMAP
1~4094
None
None
VLANMAP
0~7
VLANMAP
0~3
None
None
VLANMAP
DISABLE(Disable)
VLANMAP
5000~60000
5000
5000
Default/Recommen GTPU ded Value
3~6
0~63
63
63
None
Parameter Relationship
Access
Service Interrupted After Modification
Interruption Scope
Interruption Duration (min)
None
Read Only
N/A
N/A
N/A
None
Read & Write
No (And no impact on the UE in idle mode) No (And no impact on the UE in idle mode) No (And no impact on the UE in idle mode)
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
Yes
Cells
<1
None
Read & Write
Yes
Cells
<1
None
Read & Write
Yes
Cells
<1
None
Read & Write
Yes
Cells
<1
The parameter is used only when the PROTOCOL Read & Write parameter is set to TDL_IR. None Read Only
No (And no impact on the UE in idle mode) No (And no impact on the UE in idle mode) N/A
N/A
N/A
N/A
N/A
None
Read Only
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
If some cells of an eNodeB are neighboring cells of each other, the neighbor relationships with these cells must be removed manually Read & Write before the configuration of the eNodeB is modified. The eNodeB must be reset after the modification so that the parameter can take effect.
Yes
eNodeB
<3
The value of NAME is a string of characters. The string cannot be null characters or contain any of the following characters: question marks (?), colons (:), right angle brackets (>), left angle brackets (<), stars (*), slashes (/), Read & Write backslashes (\), pipes (|), double quotation marks ("), commas (,), semicolons (;), equal signs (=), single quotation marks ('), three plus signs (+++), two or more continuous blanks, and two or more continuous percentage signs (%).
No (And no impact on the UE in idle mode)
N/A
N/A
None
Read & Write
Yes
eNodeB
<3
None
Read & Write
Yes
eNodeB
When the automatic power control switch is turned on, the services of a cell are interrupted from the automatic poweroff time to the next automatic power-on time.
1. PowerOffTime must range from 22:00:00 to 05:00:00 of the next day. Read & Write 2. PowerOnTime must be an hour later than PowerOffTime. 1. PowerOnTime must be an hour later than PowerOffTime. Read & Write 2. PowerOnTime must range from 23:00:00 to 06:00:00 of the next day.
Yes
eNodeB
When the automatic power control switch is turned on, the services of a cell are interrupted from the automatic poweroff time to the next automatic power-on time.
N/A
N/A
This parameter is valid only when GCDF is set to DEG.
Read & Write
N/A
N/A
This parameter is valid only when GCDF is set to DEG.
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
LONGITUDE and LATITUDE are valid only when this parameter is set to DEG. LONGITUDESECF Read & Write ORMAT and LONGITUDESECF ORMAT are valid only when this parameter is set to SEC. 1. This parameter must be specified if GCDF is set to SEC. 2. If GCDF is set to SEC, this parameter must be specified in the format of dd:mm:ss.ssss. dd indicates the degree ranging from -90 to Read & Write +90, mm indicates the minute ranging from 0 to 59, and ss.ssss indicates the second ranging from 0 to 59.9999. The value range of this parameter is from -90:00:00.0000 to +90:00:00.0000.
N/A
N/A
N/A
N/A
1. This parameter must be specified if GCDF is set to SEC. 2. If GCDF is set to SEC, this parameter must be specified in the format of ddd:mm:ss.ssss. ddd indicates the degree ranging from Read & Write -180 to +180, mm indicates the minute ranging from 0 to 59, and ss.ssss indicates the second ranging from 0 to 59.9999. The value range of this parameter is from 180:00:00.0000 to +180:00:00.0000.
N/A
N/A
None
Read & Write
Yes
eNodeB
<3
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
1. The value range of FLTTHRESHOLD depends on the value of KPITYPE. If KPITYPE is set to Transmission_Pack et_Loss_Rate, the threshold is set to a value in the range of 0 to 1000. If KPITYPE is set to Transmission_Dela y, the threshold is set to a value in the range of 0 ms to 5000 ms. Read & Write If KPITYPE is set to Transmission_Jitter, the threshold is set to a value in the range of 0 ms to 1000 ms. If KPITYPE is set to Packet_Loss_Rate, the threshold is set to a value in the range of 0 to 1000. If KPITYPE is set to Cell_RRC_Connect _Succ_Rate, the threshold is set to a value in the range
N/A
N/A
1. FLTTHRESHOLD must be greater than RESTHRESHOLD if KPITYPE is set to Transmission_Pack et_Loss_Rate, Transmission_Dela y, Transmission_Jitter, Packet_Loss_Rate, or Cell_Call_Drop_Rat e. 2. FLTTHRESHOLD Read & Write must be less than RESTHRESHOLD if KPITYPE is set to Cell_RRC_Connect _Succ_Rate, Cell_ERAB_Setup_ Succ_Rate, IntraFrequency_HO_Su cc_Rate, InterFrequency_HO_Su cc_Rate, LTECDMA_Handover_ Succ_Rate, LTEWCDMA_Handover _Succ_Rate, or LTEGERAN_Handover _Succ_Rate.
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
Yes
Cells
None
Read & Write
Yes
Cells
None
Read & Write
N/A
N/A
None
Read & Write
Yes
Cells
<1
None
Read & Write
Yes
Cells
<1
None
Read & Write
Yes
Cells
<1
None
Read & Write
Yes
Cells
<1
None
Read & Write
Yes
Cells
<1
None
Read & Write
Yes
Cells
<1
None
Read & Write
Yes
Cells
<1
None
Read & Write
Yes
Cells
<1
None
Read & Write
Yes
Cells
<1
None
Read & Write
Yes
Cells
<1
None
Read & Write
Yes
Cells
<1
None
Read & Write
Yes
Cells
<1
None
Read & Write
Yes
Cells
<1
None
Read & Write
Yes
Cells
<1
None
Read & Write
Yes
Cells
<1
None
Read & Write
Yes
Cells
<1
None
Read & Write
Yes
Cells
<1
None
Read & Write
Yes
Cells
<1
None
Read & Write
Yes
Cells
<1
None
Read & Write
Yes
Cells
<1
None
Read & Write
Yes
Cells
<1
None
Read & Write
Yes
Cells
<1
None
Read & Write
Yes
Cells
<1
None
Read & Write
Yes
Cells
<1
None
Read & Write
Yes
Cells
<1
None
Read & Write
Yes
Cells
<1
None
Read & Write
Yes
Cells
<1
None
Read & Write
Yes
Cells
<1
None
Read & Write
Yes
Cells
<1
None
Read & Write
Yes
Cells
<1
None
Read & Write
Yes
Cells
<1
None
Read & Write
Yes
Cells
<1
None
Read & Write
Yes
Cells
<1
None
Read & Write
Yes
Cells
<1
None
Read & Write
Yes
Cells
<1
None
Read & Write
Yes
Cells
<1
None
Read & Write
Yes
Cells
<1
None
Read & Write
Yes
Cells
<1
None
Read & Write
Yes
Cells
<1
None
Read & Write
Yes
Cells
<1
None
Read & Write
Yes
Cells
<1
None
Read & Write
Yes
Cells
<1
None
Read & Write
Yes
Cells
<1
None
Read & Write
Yes
Cells
<1
None
Read & Write
Yes
Cells
<1
None
Read & Write
Yes
Cells
<1
None
Read & Write
Yes
Cells
<1
None
Read & Write
Yes
Cells
<1
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
No (And no impact on the UE in idle mode) No (And no impact on the UE in idle mode)
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
Yes
Cells
<1
None
Read & Write
Yes
Cells
<1
None
Read & Write
Yes
Cells
<1
None
Read & Write
Yes
Cells
<1
None
Read & Write
Yes
Cells
<1
None
Read & Write
Yes
Cells
<1
None
Read & Write
Yes
Cells
<1
None
Read & Write
Yes
Cells
<1
None
Read & Write
Yes
Cells
<1
None
Read & Write
Yes
Cells
<1
None
Read & Write
Yes
Cells
<1
None
Read & Write
Yes
Cells
<1
None
Read & Write
Yes
Cells
<1
None
Read & Write
Yes
Cells
<1
None
Read & Write
Yes
Cells
<1
None
Read & Write
Yes
Cells
<1
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
When CTRLCN in the ALD MO is set to 0, the value range of CTRLSRN is 4 to 5, or 60 to Read & Write 254. When the value range of CTRLCN in the ALD MO is 1 to 62, CTRLSRN is set to 4 or 5.
N/A
N/A
When CTRLSRN in the ALD MO is set to 4 or 5, the value of CTRLSN ranges from 0 to 8 if TYPE in the Cabinet MO where the ALD MO is located is set to BTS3900AL. The Read & Write value of CTRLSN ranges from 0 to 5 if TYPE is not set to BTS3900AL. When the value of CTRLSRN in the ALD MO ranges from 60 to 254, CTRLSN is set to 0.
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
In the RET MO, when SCENARIO is not set to REGULAR, Read & Write VENDORCODE and SERIALNO must be specified. In the RET MO, when SCENARIO is not set to REGULAR, Read & Write VENDORCODE and SERIALNO must be specified. None Read Only
N/A
N/A
N/A
N/A
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
When CN in the AntennaPort MO is set to 0, the value range of SRN is 4 to 5 or 60 to 254. When the value of Read Only CN in the AntennaPort MO ranges from 1 to 62, the value of SRN is set to 4 or 5. When SRN in the AntennaPort MO is set to 4 or 5, the value of SN ranges from 0 to 8 if TYPE of the Cabinet MO where the AntennaPort MO is located is set to Read Only BTS3900AL. The value of CTRLSN ranges from 0 to 5 if TYPE is not set to BTS3900AL. When the value of SRN in the AntennaPort MO ranges from 60 to 254, SN is set 0.
N/A
N/A
N/A
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
In the same RRU MO, PWRSWITCH in the RetPort MO and PWRSWITCH Read & Write in the AntennaPort cannot be set to ON at the same time.
N/A
N/A
None
Read & Write
N/A
N/A
In an AntennaPort MO, if PWRSWITCH is set to ON, the value of Read & Write UOTHD must be smaller than UCTHD.
N/A
N/A
In an AntennaPort MO, if PWRSWITCH is set to ON, the value of UOTHD must be smaller than UCTHD. Read & Write In an AntennaPort MO, if PWRSWITCH is set to ON, the value of UCTHD must be smaller than OCTHD.
N/A
N/A
In an AntennaPort MO, if PWRSWITCH is set to ON, the value of Read & Write OCTHD must be smaller than OOTHD.
N/A
N/A
In an AntennaPort MO, if PWRSWITCH is set to ON, the value of OCTHD must be smaller than OOTHD. Read & Write In an AntennaPort MO, if PWRSWITCH is set to ON, the value of UCTHD must be smaller than OCTHD.
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
When POLARTYPE and RETTYPE in a RET are set to SINGLE and SINGLE_RET, respectively, only Read & Write one of CONNCN1 and CONNCN2 in the RETSubunit MO needs to be configured. The SCENARIO should be configured on the basis of actual physical connection and meet the following conditions: 1. When SCENARIO is set to REGULAR, one Read & Write RRU can control one RET; 2. When SCENARIO is set to DAISY_CHAIN or SECTOR_SPLITTI NG or 2G_EXTENSION, one RRU can control more than one RET.
N/A
N/A
N/A
N/A
None
Read & Write
No (And no impact on the UE in idle mode) N/A
N/A
N/A
None
Read Only
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
N/A
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
No (And no impact on the UE in idle mode) No (And no impact on the UE in idle mode) No (And no impact on the UE in idle mode) No (And no impact on the UE in idle mode)
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
In a RetDeviceData MO, if BAND1 is not set to UNUSED, BAND1 cannot be the same as BAND2, BAND3, or BAND4. The same rule applies to BAND2, BAND3, and BAND4. In a RetDeviceData MO, when BAND4 is not set to UNUSED, BAND3 cannot be set to UNUSED. When BAND3 is not set to Read & Write UNUSED, BAND2 cannot be set to UNUSED. When BAND2 is not set to UNUSED, BAND1 cannot be set to UNUSED. In a RetDeviceData MO, when BAND4 is not set to UNUSED, BAND4 must be greater than BAND3. When BAND3 is not set to UNUSED, BAND3 must be greater than BAND2. When
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None None None
Read Only Read Only Read Only Read Only
N/A N/A N/A N/A
N/A N/A N/A N/A
N/A N/A N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
In the same RRU MO, PWRSWITCH in the RetPort MO and PWRSWITCH Read & Write in the AntennaPort cannot be set to ON at the same time.
N/A
N/A
None
Read & Write
N/A
N/A
In a RetPort MO, if PWRSWITCH is set to ON, the value of Read & Write UOTHD must be smaller than UCTHD.
N/A
N/A
In a RetPort MO, if PWRSWITCH is set to ON, the value of UOTHD must be smaller than UCTHD. Read & Write In a RetPort MO, if PWRSWITCH is set to ON, the value of UCTHD must be smaller than OCTHD.
N/A
N/A
In a RetPort MO, if PWRSWITCH is set to ON, the value of Read & Write OCTHD must be smaller than the value of OOTHD.
N/A
N/A
In a RetPort MO, if PWRSWITCH is set to ON, the value of OCTHD must be smaller than the value of OOTHD. Read & Write In a RetPort MO, if PWRSWITCH is set to ON, the value of UCTHD must be smaller than OCTHD.
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
Only one RETSubunit MO can be configured on an AntennaPort MO. When CONNCN1 in a RETSubunit MO is set to a value other than 255, CONNSRN1 and CONNSN1 must all be set to a value other than 255. Similarly, when CONNCN2 in a RETSubunit MO is set to a value other Read & Write than 255, CONNSRN2 and CONNSN2 must all be set to a value other than 255. In a RETSubunit MO, the combination of CONNCN1, CONNSRN1, CONNSN1, and CONNPN1 cannot be the same as the combination of CONNCN2, CONNSRN2, CONNSN2, and
N/A
N/A
N/A
N/A
Only one RETSubunit MO can be configured on an AntennaPort MO. When CONNCN1 in a RETSubunit MO is set to a value other than 255, CONNSRN1 and CONNSN1 must all be set to a value other than 255. Similarly, when CONNCN2 in a RETSubunit MO is set to a value other Read & Write than 255, CONNSRN2 and CONNSN2 must all be set to a value other than 255. In a RETSubunit MO, the combination of CONNCN1, CONNSRN1, CONNSN1, and CONNPN1 cannot be the same as the combination of CONNCN2, CONNSRN2, CONNSN2, and Only one RETSubunit MO can be configured on an AntennaPort MO. In a RETSubunit MO, the combination of CONNCN1, Read & Write CONNSRN1, CONNSN1, and CONNPN1 cannot be the same as the combination of CONNCN2, CONNSRN2, CONNSN2, and CONNPN2.
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Only one RETSubunit MO can be configured on an AntennaPort MO. When CONNCN1 in a RETSubunit MO is set to a value other than 255, CONNSRN1 and CONNSN1 must all be set to a value other than 255. Similarly, when CONNCN2 in a RETSubunit MO is set to a value other Read & Write than 255, CONNSRN2 and CONNSN2 must all be set to a value other than 255. In a RETSubunit MO, the combination of CONNCN1, CONNSRN1, CONNSN1, and CONNPN1 cannot be the same as the combination of CONNCN2, CONNSRN2, CONNSN2, and Only one RETSubunit MO can be configured on an AntennaPort MO. In a RETSubunit MO, the combination of CONNCN1, Read & Write CONNSRN1, CONNSN1, and CONNPN1 cannot be the same as the combination of CONNCN2, CONNSRN2, CONNSN2, and CONNPN2.
N/A
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
The value of SUBNAME must be Read & Write unique in RETSubunit MOs. None Read & Write
N/A
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
N/A
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
No (And no impact on the UE in idle mode) No (And no impact on the UE in idle mode) No (And no impact on the UE in idle mode) No (And no impact on the UE in idle mode)
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
In a TMADeviceData MO, if BAND1 is not set to UNUSED, BAND1 cannot be the same as BAND2, BAND3, or BAND4. The same rule applies to BAND2, BAND3, and BAND4. In a TMADeviceData MO, when BAND4 is not set to UNUSED, BAND3 cannot be set to Read & Write UNUSED. When BAND3 is not set to UNUSED, BAND2 cannot be set to UNUSED. When BAND2 is not set to UNUSED, BAND1 cannot be set to UNUSED. In a TMADeviceData MO, when BAND4 is not set to UNUSED, BAND4 must be greater than BAND3. When BAND3 is not set to
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
The four frequency bands supported by Read Only the TMA must differ from each other.
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
If RXMINFB or RXMAXFB in the TMADeviceData Read Only MO is set, RXMINFB must be smaller than RXMAXFB. If TXMINFB or TXMAXFB in the TMADeviceData MO is set, TXMINFB must be smaller than TXMAXFB. If TXMINFB or TXMAXFB in the TMADeviceData MO is set, TXMINFB must be smaller than TXMAXFB.
N/A
N/A
N/A
Read Only
N/A
N/A
N/A
Read Only
N/A
N/A
N/A
If RXMINFB or RXMAXFB in the TMADeviceData Read Only MO is set, RXMINFB must be smaller than RXMAXFB. None Read Only
N/A
N/A
N/A
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
In a TMASubunit MO, a unique combination of CONNCN, CONNSRN, CONNSN, and CONNPN is necessary. In a TMASubunit MO, a unique combination of CONNCN, CONNSRN, CONNSN, and CONNPN is necessary. In a TMASubunit MO, a unique combination of CONNCN, CONNSRN, CONNSN, and CONNPN is necessary. In a TMASubunit MO, a unique combination of CONNCN, CONNSRN, CONNSN, and CONNPN is necessary.
Read & Write
N/A
N/A
Read & Write
N/A
N/A
Read & Write
N/A
N/A
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
The following parameters cannot be set to the same value: DEVICENAME in the RET MO, DEVICENAME in the TMA MO,and DEVICENAME in the VRET MO.
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
If CONNPN1,CONNP N2,CONNPN3 and CONNPN4 in a VRETSubunit MO are not set to NULL, Read & Write they must be different. Only one VRETSubunit MO can be connected to a VAntennaPort MO.
N/A
N/A
N/A
N/A
The value of SUBNAME must be unique in Read & Write VRETSubunit MOs.
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
If MODE and CLKSRC in the Tasm MO are set to MANUAL and TOD, respectively, TYPE of the corresponding TOD Read Only MO must be set to IN. In a TOD MO, when SN is set to 6 or 7, TYPE cannot be set to OUT.
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
When two TOD MOs have the value 6 or 7 for SN, SN in one TOD MO must be set to 6 and SN in the other TOD MO must be set to 7. When SN in two TOD MOs both are greater than or equal to 0 and smaller than or Read Only equal to 5, the values of SN in the two MOs must be the same. The values of SN in two TOD MOs must both be greater than or equal to 0 and smaller than or equal to 5, or greater than or equal to 6 and smaller than or equal to 7.
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
When a GPS MO is configured on a BBU subrack, GN Read Only must be set to 0 or 1.
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
When ICPT in the IPCLKLNK MO is set to HW_DEFINED, PT in a DEVIP MO corresponding to the IPCLKLNK MO cannot be set to LOOPINT. If two IPCLKLNK MOs have been configured, the two MOs must have the same ICPT value. When two IPCLKLNK MOs are configured, the Read Only values of MACMODE are both set to YES and the values of CLKMAC must be different in the two MOs when the following conditions are met: 1. The values of ICPT are both set to PTP; 2. The values of CNM are both set to L2_MULTICAST. When two IPCLKLNK MOs are configured, the
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
In the IPCLKLNK MO, CIP is valid only when CNM is not set to L2_MULTICAST and IPMODE is set to IPV4. When two IPCLKLNK MOs are configured, the values of CIP in the two MOs must be the same when the following conditions are met: 1. ICPT is set to PTP and CNM is not set to Read Only L2_MULTICAST in the two MOs; 2. IPMODE is set to IPV4 in the two MOs. In the IPCLKLNK MO, if CNM is not set to L2_MULTICAST and IPMODE is set to IPV4, CIP cannot be set to 0.0.0.0, 255.255.255.255, 127.x.x.x, or 0.x.x.x, and should be one of CLASS A, CLASS B, CLASS
N/A
N/A
N/A
In the IPCLKLNK MO, SIP is valid only when CNM is not set to L2_MULTICAST and IPMODE is set to IPV4. In an IPCLKLNK MO, SIP cannot be set to 0.0.0.0, 255.255.255.255, 127.x.x.x, or 0.x.x.x, and should be one of CLASS A, CLASS B, CLASS C, when the following conditions Read Only are met: 1. CNM is not set to L2_MULTICAST; 2. IPMODE is set to IPV4. When two IPCLKLNK MOs are configured on the same board, the values of SIP in the two MOs must be different when the following conditions are met: 1. ICPT is set to PTP and CNM is not set to L2_MULTICAST
N/A
N/A
N/A
The DM is valid only when ICPT in the Read Only IPCLKLNK MO is set to PTP.
N/A
N/A
N/A
When ICPT in the IPCLKLNK MO is set to HW_DEFINED, CMPST and DELAYTYPE in the IPCLKLNK MO Read & Write cannot be configured. The DELAYTYPE is valid only when ICPT in the IPCLKLNK MO is set to PTP.
N/A
N/A
When CLASSIDENTIFY in the IPCLKLNK MO is set to OFF, the BMC algorithm is disabled, and the settings of CLASS0, CLASS1, CLASS2, and CLASS3 do not take effect. When CLASSIDENTIFY in the IPCLKLNK MO Read & Write is set to ON, the BMC algorithm is enabled. If there are multiple clock servers at different clock quality levels, the server that meets the customer's requirements to the most extent is selected in descending order of priority.
N/A
N/A
When CLASSIDENTIFY in the IPCLKLNK MO is set to OFF, the BMC algorithm is disabled, and the setting of CLASS0 does not take effect. When CLASSIDENTIFY in the IPCLKLNK MO is set to ON, the BMC algorithm is enabled. If there are multiple clock servers at different Read & Write clock quality levels, the server that meets the customer's requirements to the most extent is selected in descending order of priority. The values of any two parameters among CLASS0, CLASS1, CLASS2, and CLASS3 in an IPCLKLNK must be different.
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
In the IPCLKLNK MO, the MACMODE is valid only when ICPT is Read & Write set to PTP and CNM is set to L2_MULTICAST. In the IPCLKLNK MO, the CLKMAC is valid only when ICPT is set to PTP, Read & Write CNM is set to L2_MULTICAST, and MACMODE is set to YES.
N/A
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
The CNM is valid only when ICPT in Read Only the IPCLKLNK MO is set to PTP. When ICPT in the IPCLKLNK MO is set to HW_DEFINED, CMPST and DELAYTYPE in the Read & Write IPCLKLNK MO cannot be configured. The CMPST is valid only when ICPT in the IPCLKLNK MO is set to PTP.
N/A
N/A
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
When two IPCLKLNK MOs are configured, the values of PRI must Read & Write be the same if the values of ICPT are both set to PTP in the two MOs.
N/A
N/A
In the IPCLKLNK MO, ANNFREQ is valid only when CNM is set to UNICAST and PROFILETYPE is set to G.8265.1.
Read & Write
N/A
N/A
In the IPCLKLNK MO, SYNCFREQ is valid only when Read & Write CNM is set to UNICAST and PROFILETYPE is set to G.8265.1.
N/A
N/A
In the IPCLKLNK MO, MASTERPRIO is valid only when Read & Write CNM is set to UNICAST and PROFILETYPE is set to G.8265.1.
N/A
N/A
In the IPCLKLNK MO, PROFILETYPE is valid only when CNM is set to UNICAST. If PROFILETYPE in the IPCLKLNK MO is set to G.8265.1, CLKSYNCMODE in the Tasm MO must be set to FREQ. When two IPCLKLNK MOs are configured, the values of NEGDURATION in Read & Write the two MOs must be the same when the following conditions are met: 1. The values of ICPT are both set to PTP; 2. The values of CNM are both set to UNICAST; 3. The values of PROFILETYPE are both set to G.8265.1. When two IPCLKLNK MOs are configured, the values of
N/A
N/A
In the IPCLKLNK MO, NEGDURATION is valid only when CNM is set to UNICAST and PROFILETYPE is set to G.8265.1. When two IPCLKLNK MOs are configured, the values of NEGDURATION in the two MOs must be the same when the following conditions are met: Read & Write 1. The values of ICPT are both set to PTP; 2. The values of CNM are both set to UNICAST; 3. The values of PROFILETYPE are both set to G.8265.1. When two IPCLKLNK MOs are configured, the values of PROFILETYPE in the two MOs must be the same when the following If two IPCLKLNK MOs are configured, the two MOs must have the same IPMODE value. Read Only If IPMODE in the IPCLKLNK MO is set to IPV6, CLKSYNCMODE in the Tasm MO must be set to FREQ.
N/A
N/A
N/A
N/A
N/A
In the IPCLKLNK MO, CIPV6 is valid only when CNM is not set to L2_MULTICAST and IPMODE is set to IPV6. In the IPCLKLNK MO, SIPV6 and CIPV6 must be set to different values when ICPT is set to PTP and CNM is not set to L2_MULTICAST and IPMODE is set Read Only to IPV6. When two IPCLKLNK MOs are configured, the values of CIPV6 in the two MOs must be the same when the following conditions are met: 1. ICPT is set to PTP and CNM is not set to L2_MULTICAST in the two MOs; 2. IPMODE is set to IPV6 in the two MOs.
N/A
N/A
N/A
In the IPCLKLNK MO, SIPV6 is valid only when CNM is not set to L2_MULTICAST and IPMODE is set to IPV6. When two IPCLKLNK MOs are configured on the same board, the values of SIPV6 in Read Only the two MOs must be different when the following conditions are met: 1. ICPT is set to PTP and CNM is not set to L2_MULTICAST; 2. IPMODE is set to IPV6 in the two MOs.
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
When a MPT MO is configured in the slot corresponding Read Only to the SN in the SyncEth MO, PN is set to 0 or 1.
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
The SRCNO is valid only when the clock source specified by the CLKSRC in the Tasm MO supports Read & Write more than one clock link and the value of MODE is set to MANUAL.
N/A
N/A
The CLKSRC is valid only when MODE in the Tasm MO is set to MANUAL. If MODE and CLKSRC in the Read & Write Tasm MO are set to MANUAL and TOD, respectively, TYPE of the corresponding TOD MO must be set to IN.
N/A
N/A
When MODE is set to MANUAL and CLKSRC is set to SYNCETH+IPCLK or GPS+SYNCETH, the value of MODE can be changed to AUTO only in the following methods: 1. Change the value of MODE from MANUAL to FREE, and then to AUTO; 2. Change the value Read & Write of CLKSRC to other values, and then change the value of MODE to AUTO. If MODE and CLKSRC in the Tasm MO are set to MANUAL and TOD, respectively, TYPE of the corresponding TOD MO must be set to IN.
N/A
N/A
If PROFILETYPE in the IPCLKLNK MO is set to G.8265.1, CLKSYNCMODE in the Tasm MO must be set to FREQ. Read & Write If IPMODE in the IPCLKLNK MO is set to IPV6, CLKSYNCMODE in the Tasm MO must be set to FREQ.
Yes
Cells
Services of the cells recover after the reference clock is locked again.
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
Yes
BS
Services are interrupted until the reference clock is qualified.
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
When AT in the RRUCHAIN MO is set to PEERPORT, the board specified by HSN must have not been configured. When AT in the RRUCHAIN MO is set to PEERPORT, Read Only if HSN equal to 2, the BBP with the value of SN equal to 3 must have been configured; if HSN equal to 3, the BBP with the value of SN equal to 2 must have been configured. None Read Only
N/A
N/A
N/A
N/A
N/A
N/A
In the RRUCHAIN MO, when TT is set to RING or LOADBALANCE, WM in the BBP MO corresponding to HCN, HSRN, and Read & Write HSN must be the same as the WM in the BBP MO corresponding to TCN, TSRN, and TSN.
Yes
The services carried on the baseband processing board and the services Less than 1 minute carried on RF modules connected to the baseband processing board
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
Yes
The operated board Less than 2 minutes
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
No (And no impact on the UE in idle mode) No (And no impact on the UE in idle mode) No (And no impact on the UE in idle mode) No (And no impact on the UE in idle mode) No (And no impact on the UE in idle mode) No (And no impact on the UE in idle mode)
N/A
N/A
None
Read & Write
N/A
N/A
MPN in the CCU MOs under the Read & Write same manager unit must be the same.
N/A
N/A
None
Read & Write
N/A
N/A
CCN in the CCU MOs under the Read & Write same manager unit must be unique. In the CCU MO, CS is valid only when Read & Write DCF is set to YES.
N/A
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None None
Read Only Read Only Read Only
N/A N/A N/A
N/A N/A N/A
N/A N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
CN, SRN and SN in the CpriPort must meet the following conditions: 1. when CN is set to 0, SRN must be set to 0~1, 4~5 or 60~254; 2. when CN is set to 1~7, SRN must be set to 0~1, 4~5; 3. when CN is set to 8~62, SRN must be set to 4~5; 4. when SRN is set to 0~1, SN must be set to Read Only 0~7; 5. when SRN is set to 4~5 and TYPE in the Cabinet is equal to BTS3900AL, SN must be set to 0~8; 6. when SRN is set to 4~5 and TYPE in the Cabinet is not equal to BTS3900AL, SN must be set to 0~5; 7. when SRN is set to 60~254, SN must be set to 0.
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
ET in the Equipment MO must be later than ST.
Read & Write
N/A
N/A
ET in the Equipment MO must be later than ST.
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
In the Equipment MO, the value of DVAH must be Read & Write smaller than or equal to the value of DVAL minus 5.
N/A
N/A
In the Equipment MO, the value of DVAH must be Read & Write smaller than or equal to the value of DVAL minus 5.
N/A
N/A
None
Read Only
N/A
N/A
N/A
TYPE in the Subrack MO can be set to PMU only when TYPE in the Cabinet MO is set to one of the following values: APM30, PS4890, OMB, BTS3900, VIRTUAL, TP48600A, and BTS3900AL. TYPE in the Subrack MO can be set to TCU only when TYPE in the Cabinet MO is set Read & Write to one of the following values: APM30, OMB, TMC, BBC, VIRTUAL, TP48600A, and BTS3900AL. TYPE in the Subrack MO can be set to FMU only when TYPE in the Cabinet MO is set to one of the following values: RFC, BTS3900, BTS3900L, VIRTUAL,
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
When the value of CN ranges from 0 to 7 and SRN is set to 0 or 1, TYPE in the Subrack MO can be set to BBU3900. When the value of CN ranges from 0 to 62 and SRN is set Read Only to 4 or 5, TYPE in the Subrack MO must be set to RFU. In a Subrack MO, when TYPE is set to BBU3900, the value of CN must be smaller than or equal to 7. SRN in the BBU subrack MO must be set to 0 when TYPE in the Cabinet MO is set to OMB. In a Subrack MO, when TYPE is set to BBU3900, SRN must be set to 0 or 1. In a Subrack MO, when TYPE is set to RFU, SRN must be set to 4 or 5. In a Subrack MO, Read Only when TYPE is set to TCU, SRN must be set to 8 or 14. In a Subrack MO, when TYPE is set to FMU, SRN must be set to 11 or 12. In a Subrack MO, when TYPE is set to EMU, the value of SRN must range from 40 to 59. In a Subrack MO, when TYPE is set to PMU, SRN must be set to 7.
N/A
N/A
N/A
N/A
N/A
N/A
TYPE in the Subrack MO can be set to PMU only when TYPE in the Cabinet MO is set to one of the following values: APM30, PS4890, OMB, BTS3900, VIRTUAL, TP48600A, and BTS3900AL. TYPE in the Subrack MO can be set to TCU only when TYPE in the Cabinet MO is set Read Only to one of the following values: APM30, OMB, TMC, BBC, VIRTUAL, TP48600A, and BTS3900AL. TYPE in the Subrack MO can be set to FMU only when TYPE in the Cabinet MO is set to one of the following values: RFC, BTS3900, BTS3900L, VIRTUAL,
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
N/A
The manager unit of an EMU MO must be one of the following: 1. A Subrack MO with the value of SRN smaller than or Read & Write equal to 1; 2. A RRU MO with the value of SRN ranging from 60 to 254; 3. A CCU MO with SRN set to 15. In an EMU MO, when MSRN is set to 15, the value of MPN must be smaller than or equal to 7. When the value of MSRN is greater than or Read & Write equal to 60, the value of MPN must be equal to 0. When the value of MSRN is smaller than or equal to 1, the value of MPN must be smaller than or equal to 1.
N/A
N/A
N/A
N/A
N/A
None
Read & Write
N/A
N/A
In an EMU MO, the value of TUTHD minus the value of Read & Write TLTHD must be greater than or equal to 3.
N/A
N/A
In an EMU MO, the value of TUTHD minus the value of Read & Write TLTHD must be greater than or equal to 3.
N/A
N/A
In an EMU MO, the value of HUTHD minus the value of Read & Write HLTHD must be greater than or equal to 5. In an EMU MO, the value of HUTHD minus the value of Read & Write HLTHD must be greater than or equal to 5.
N/A
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
N/A
The manager unit of a FMU MO must be one of the following: 1. A Subrack MO with the value of SRN smaller than or Read & Write equal to 1; 2. A RRU MO with the value of SRN ranging from 60 to 254; 3. A CCU MO with SRN set to 15.
N/A
N/A
N/A
In a FMU MO, when MSRN is set to 15, the value of MPN must be smaller than or equal to 7. When the value of MSRN is greater than or equal to 60, Read & Write the value of MPN must be equal to 0. When the value of MSRN is smaller than or equal to 1, the value of MPN must be smaller than or equal to 1.
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
SRN in a TCU MO can be set to 14 only when TYPE in Read Only the Cabinet MO where the TCU MO is located is set to VIRTUAL.
N/A
N/A
N/A
SN in the TCU MO must be set to 0 when TYPE in a Cabinet MO where the TCU MO is located is set to VIRTUAL, APM30, TMC, or OMB. SN in the TCU MO Read Only must be set to a value smaller than 3 when TYPE in a Cabinet MO where the TCU MO is located is set to BBC or BTS3900AL.
N/A
N/A
N/A
None
Read & Write
N/A
N/A
N/A
The manager unit of a TCU MO must be one of the following: 1. A Subrack MO with the value of SRN smaller than or Read & Write equal to 1; 2. A RRU MO with the value of SRN ranging from 60 to 254; 3. A CCU MO with SRN set to 15.
N/A
N/A
N/A
In a TCU MO, when MSRN is set to 15, the value of MPN must be smaller than or equal to 7. When the value of MSRN is greater than or equal to 60, Read & Write the value of MPN must be equal to 0. When the value of MSRN is smaller than or equal to 1, the value of MPN must be smaller than or equal to 1.
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
In the HtCDPa MO, the value of HTCP Read & Write must be greater than LTCP. In the HtCDPa MO, the value of HTCP Read & Write must be greater than LTCP.
N/A
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
N/A
The manager unit of a PMU MO must be one of the following: 1. A Subrack MO with the value of SRN smaller than or Read & Write equal to 1; 2. A RRU MO with the value of SRN ranging from 60 to 254; 3. A CCU MO with SRN set to 15.
N/A
N/A
N/A
In a PMU MO, when MSRN is set to 15, the value of MPN must be smaller than or equal to 7. When the value of MSRN is greater than or equal to 60, Read & Write the value of MPN must be equal to 0. When the value of MSRN is smaller than or equal to 1, the value of MPN must be smaller than or equal to 1.
N/A
N/A
None
Read & Write
N/A
N/A
DCVLTHD in the PMU MO must be greater than 430 under the following conditions: 1. PTYPE in the PMU MO is set to a value other than SC48200; 2. The PMU MO does not have a lower-level Battery MO; 3. LSDF is set to DISABLE. LSDV in the PMU MO must be greater than 430 under the Read Only following conditions: 1. PTYPE in the PMU MO is set to a value other than SC48200; 2. The PMU MO does not have a lower-level Battery MO; 3. LSDF is set to ENABLE. In the PMU MO, DCVLTHD must be smaller than 515 when PTYPE is set to a value other than SC48200 and there is no lowerIn a PMU MO, when PTYPE is not set to SC48200, the value Read & Write of ACVLTHD must be smaller than ACVUTHD.
N/A
N/A
N/A
N/A
N/A
In a PMU MO, when PTYPE is not set to SC48200, the value Read & Write of ACVLTHD must be smaller than ACVUTHD.
N/A
N/A
DCVLTHD in the PMU MO must be greater than 430 under the following conditions: 1. PTYPE in the PMU MO is set to a value other than SC48200; 2. The PMU MO does not have a lower-level Battery MO; 3. LSDF is set to DISABLE. In the PMU MO, DCVLTHD must be smaller than 515 Read & Write when PTYPE is set to a value other than SC48200 and there is no lowerlevel Battery MO. In a PMU MO, when PTYPE is set to a value other than SC48200, FCV in the Battery MO corresponding to the PMU MO must be greater than DCVLTHD in the PMU MO plus 20. SDV in the Battery MO corresponding
N/A
N/A
In a PMU MO, when PTYPE is set to SC48200, BCV in the Battery MO corresponding to the PMU MO must be smaller than or equal to DCVUTHD in the PMU MO minus 15. In a PMU MO, when PTYPE is set to a value other than SC48200, BCV in the Battery MO corresponding to the PMU MO must Read & Write be smaller than DCVUTHD in the PMU MO minus 10. In a PMU MO, when PTYPE is set to SC48200, the value of DCVLTHD must be greater than or equal to 460 and smaller than or equal to 500, and the value of DCVUTHD must be greater than or equal to 580 and smaller than or equal to 600.
N/A
N/A
In the PMU MO, when PTYPE is set to SC48200, LSDF is set to ENABLE by default. When PTYPE is set to a value other than SC48200, LSDF is set to DISABLE by default. DCVLTHD in the PMU MO must be greater than 430 under the following conditions: 1. PTYPE in the PMU MO is set to a value Read & Write other than SC48200; 2. The PMU MO does not have a lower-level Battery MO; 3. LSDF is set to DISABLE. LSDV in the PMU MO must be greater than 430 under the following conditions: 1. PTYPE in the PMU MO is set to a value other than SC48200; 2. The PMU MO does not have a lower-level
N/A
N/A
The LSDV is valid only when LSDF in the PMU MO is set to ENABLE. LSDV in the PMU MO must be greater than 430 under the following conditions: 1. PTYPE in the PMU MO is set to a value other than SC48200; 2. The PMU MO does not have a lower-level Battery MO; 3. LSDF is set to ENABLE. Read & Write LSDV in the PMU MO must be greater than or equal to SDV in the Battery MO plus 5 under the following conditions: 1. PTYPE in the PMU MO is set to SC48200; 2. LSDF in the PMU MO is set to ENABLE; 3. LVSDF in the Battery MO corresponding to the PMU MO is also set to ENABLE.
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
In a PMU MO, AHLTHD must be smaller than AHUTHD.
Read & Write
N/A
N/A
In a PMU MO, AHLTHD must be smaller than AHUTHD.
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
If PTYPE in the upper-level PMU MO of the Battery MO is set to a value other than SC48200, INSTALLTYPE in the Battery MO must be set to INNER or OUTER. Read & Write If PTYPE in the upper-level PMU MO of the Battery MO is set to SC48200, INSTALLTYPE in the Battery MO must be set to OUTER.
N/A
N/A
None
Read & Write
N/A
N/A
In a PMU MO, when PTYPE is set to SC48200, BCV in the Battery MO corresponding to the PMU MO must be smaller than or equal to DCVUTHD in the PMU MO minus 15. In a PMU MO, when PTYPE is set to a value other than SC48200, BCV in the Battery MO corresponding to the PMU MO must Read & Write be smaller than DCVUTHD in the PMU MO minus 10. If PTYPE in the upper-level PMU MO of the Battery MO is set to SC48200, BCV in the Battery MO must be greater than or equal to 542 and smaller than or equal to 575. If PTYPE in the upper-level PMU MO of the Battery MO is set to
N/A
N/A
If PTYPE in the upper-level PMU MO of the Battery MO is set to a value other than SC48200, and BN in the Battery MO is 1, BC1 in the Battery MO must be greater than or equal to 5 and smaller than or equal to 5000; If PTYPE in the upperlevel PMU MO of the Battery MO is set to a value other Read & Write than SC48200, and BN in the Battery MO is 2, BC1 and BC2 in the Battery MO must be greater than or equal to 5 and smaller than or equal to 5000. If PTYPE in the upper-level PMU MO of the Battery MO is set to SC48200, and BN in the Battery MO is 1, BC1 in the Battery MO must be greater than or
N/A
N/A
None
Read & Write
N/A
N/A
In the PMU MO, when PTYPE is set to SC48200, the actual value range of FCV is from 52 to 56.3. When PTYPE is set to a value other than SC48200, the actual value range of FCV is from 43.2 to 57.5. In a PMU MO, when PTYPE is set to a value other than SC48200, FCV in the Battery MO Read & Write corresponding to the PMU MO must be greater than DCVLTHD in the PMU MO plus 20. If PTYPE in the upper-level PMU MO of the Battery MO is set to SC48200, FCV in the Battery MO must be greater than or equal to 520 and smaller than or equal to 563. If PTYPE in the upper-level PMU When PTYPE in the upper-level PMU MO of the Battery MO is set to SC48200 and HTSDF in the Battery MO is set Read & Write to ENABLE, SDT in the Battery MO must be greater than or equal to 45 and smaller than or equal to 70.
N/A
N/A
N/A
N/A
In the PMU MO, when PTYPE is set to SC48200, the actual value range of SDT is from 45 to 70. When PTYPE is set to a value other than SC48200, the actual value range of SDT is from 40 to 70. The SDT is valid only when HTSDF in the Battery MO is set to ENABLE. SDT in the Battery MO must be greater Read & Write than TUTHD. If PTYPE in the upper-level PMU MO of the Battery MO is set to a value other than SC48200, SDT in the Battery MO must be greater than or equal to 40 and smaller than or equal to 70. When PTYPE in the upper-level PMU MO of the Battery MO is set to SC48200 and
N/A
N/A
LSDV in the PMU MO must be greater than or equal to SDV in the Battery MO plus 5 under the following conditions: 1. PTYPE in the PMU MO is set to SC48200; 2. LSDF in the PMU MO is set to ENABLE; 3. LVSDF in the Battery MO corresponding to the PMU MO is also set to ENABLE. Read & Write SDV in the Battery MO corresponding to the PMU MO must be smaller than DCVLTHD in the PMU under the following conditions: 1. LSDF in the PMU MO is set to DISABLE; 2. LVSDF in the Battery MO corresponding to the PMU MO is set to ENABLE; 3. PTYPE in the PMU MO is set to a value
N/A
N/A
The SDV is valid only when LVSDF in the Battery MO is set to ENABLE. LSDV in the PMU MO must be greater than or equal to SDV in the Battery MO plus 5 under the following conditions: 1. PTYPE in the PMU MO is set to SC48200; 2. LSDF in the PMU MO is set to ENABLE; 3. LVSDF in the Read & Write Battery MO corresponding to the PMU MO is also set to ENABLE. SDV in the Battery MO corresponding to the PMU MO must be smaller than DCVLTHD in the PMU under the following conditions: 1. LSDF in the PMU MO is set to DISABLE; 2. LVSDF in the Battery MO corresponding to If PTYPE in the upper-level PMU MO of the Battery MO is set to a value other than SC48200, TCC in the Battery MO must be smaller than or equal to 500. Read & Write If PTYPE in the upper-level PMU MO of the Battery MO is set to SC48200, TCC in the Battery MO must be smaller than or equal to 100.
N/A
N/A
N/A
N/A
None
Read & Write
N/A
N/A
TUTHD in the Battery MO must be greater than TLTHD,and be smaller than SDT. If PTYPE in the upper-level PMU MO of the Battery MO is set to a value other than SC48200, TUTHD in the Battery MO must be greater than or equal to 35 and smaller than or equal to 80. If PTYPE in the Read & Write upper-level PMU MO of the Battery MO is set to SC48200, TUTHD in the Battery MO must be greater than or equal to 35 and smaller than or equal to 60. When PTYPE in the upper-level PMU MO of the Battery MO is set to SC48200 and HTSDF in the Battery MO is set to ENABLE, SDT The BN is valid only when BTYPE in the Battery MO is set Read & Write to LI_BAT. In TP48300A type PMU, Battery BN must be 1. None Read & Write
N/A
N/A
N/A
N/A
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
If PTYPE in the upper-level PMU MO of the Battery MO is set to a value other than SC48200, and BN in the Battery MO is 1, BC1 in the Battery MO must be greater than or equal to 5 and smaller than or equal to 5000; If PTYPE in the upperlevel PMU MO of the Battery MO is set to a value other Read & Write than SC48200, and BN in the Battery MO is 2, BC1 and BC2 in the Battery MO must be greater than or equal to 5 and smaller than or equal to 5000. If PTYPE in the upper-level PMU MO of the Battery MO is set to SC48200, and BN in the Battery MO is 1, BC1 in the Battery MO must be greater than or
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
In a BatCTPa MO, when ATMODE is set to PERIOD or PERIODPOWERC Read & Write UT, the value of TDSTM must be greater than the value of DDSTM.
N/A
N/A
In a BatCTPa MO, when ATMODE is set to PERIOD or PERIODPOWERC Read & Write UT, the value of TDSTM must be greater than the value of DDSTM.
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
If PTYPE in the PMU MO is set to EPS4815, SN in the lower-level PSU MO must be set to 1 or 2. If PTYPE in the PMU MO is set to EPS48200, SN in the lower-level PSU MO must be greater than or equal to 1 and smaller than or equal to 4. If PTYPE in the PMU MO is set to TP48300A, SN in Read Only the lower-level PSU MO must be greater than or equal to 1 and smaller than or equal to 6. If PTYPE in the PMU MO is set to ETP, SN in the lower-level PSU MO must be greater than or equal to 1 and smaller than or equal to 7. If PTYPE in the PMU MO is not set to any of the following values, SN
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A No (And no impact on the UE in idle mode)
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
In the AlmPort MO, PT must be set to BOOL when all the following conditions are met: 1. The device corresponding to the AlmPort MO is an EMU MO, and the value of SRN in this EMU MO ranges from 40 to 59; 2. The value of PN ranges from 0 to 31; 3. SW is set to ON.In the AlmPort MO, PT must be set Read Only to BOOL when all the following conditions are met: 1. The device corresponding to the AlmPort MO is not an EMU MO; 2. SW is set to ON. In the AlmPort MO, PT must be set to VALUE when all the following conditions are met: 1. The device corresponding to the AlmPort MO is an EMU MO, and
N/A
N/A
N/A
The AVOL is valid only when PT in the Read & Write AlmPort MO is set to BOOL.
N/A
N/A
The UL is valid only when PT in the AlmPort MO is set to VALUE. In the AlmPort MO, when the values of SW and PT are set to ON and VALUE, respectively, the value of UL must be Read & Write greater than the value of LL. In the AlmPort MO, when the values of SW and PT are set to ON and VALUE, respectively, the value of SMUL must be greater than or equal to the value of UL.
N/A
N/A
The LL is valid only when PT in the AlmPort MO is set to VALUE. In the AlmPort MO, when the values of SW and PT are set to ON and VALUE, respectively, the value of UL must be Read & Write greater than the value of LL. In the AlmPort MO, when the values of SW and PT are set to ON and VALUE, respectively, the value of SMLL must be smaller than or equal to the value of LL.
N/A
N/A
In the AlmPort MO, the ST is valid only Read & Write when PT is set to VALUE.
N/A
N/A
The SMUL is valid only when PT in the AlmPort MO is set to VALUE. In the AlmPort MO, when the values of SW and PT are set to ON and VALUE, respectively, the value of SMUL must be greater Read & Write than the value of SMLL. In the AlmPort MO, when the values of SW and PT are set to ON and VALUE, respectively, the value of SMUL must be greater than or equal to the value of UL. The SMLL is valid only when PT in the AlmPort MO is set to VALUE. In the AlmPort MO, when the values of SW and PT are set to ON and VALUE, respectively, the value of SMUL must be greater Read & Write than the value of SMLL. In the AlmPort MO, when the values of SW and PT are set to ON and VALUE, respectively, the value of SMLL must be smaller than or equal to the value of LL.
N/A
N/A
N/A
N/A
The SOUL is valid only when PT in the AlmPort MO is set to VALUE. In the AlmPort MO, when the values of SW and PT are set Read & Write to ON and VALUE, respectively, the value of SOUL must be greater than the value of SOLL. The SOLL is valid only when PT in the AlmPort MO is set to VALUE. In the AlmPort MO, when the values of SW and PT are set Read & Write to ON and VALUE, respectively, the value of SOUL must be greater than the value of SOLL. None Read & Write
N/A
N/A
N/A
N/A
N/A
N/A
None
Read & Write
N/A
N/A
Each AAU MO must have a unique combination of CN, Read Only SRN, and SN among all MOs as follows: RRU, AAU. Each AAU MO must have a unique combination of CN, Read Only SRN, and SN among all MOs as follows: RRU, AAU. Each AAU MO must have a unique combination of CN, Read Only SRN, and SN among all MOs as follows: RRU, AAU.
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
Yes
The cells carried on Till unblocking is the RRU or RFU is performed. unavailable.
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
When TT in the RRUCHAIN MO where the RRU MO or RFU MO is located is set to RING, one of the following conditions must be met: 1. When BRKPOS1 and BRKPOS2 in the RRUCHAIN MO are not set to the same value and neither of them is set to 255, PS in the RRU MO or PS in the RFU MO must Read Only be greater than or equal to BRKPOS1 and be smaller than or equal to BRKPOS2; 2. When BRKPOS1 and BRKPOS2 in the RRUCHAIN MO are set to the same value other than 255, PS in the RRU MO or PS in the RFU MO must be the same as BRKPOS1. When TT in the RRUCHAIN MO None Read Only
N/A
N/A
Yes
Cell
<1
None
Read & Write
Yes
Cell
<1
None
Read & Write
Yes
Until the execution Services carried by of the MOD RRU the RRU or RFU command is successful
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
Yes
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
N/A
N/A
Yes
Cell
<1
None
Read & Write
Yes
Cell
<1
None
Read & Write
Yes
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
When the value of SN in the RFU MO is greater than 5, TYPE in the corresponding Cabinet MO must be set to BTS3900AL.
Read Only
N/A
N/A
N/A
None
Read & Write
Yes
The cells carried on the RRU are <1 unavailable.
None
Read & Write
Yes
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
N/A
N/A
Yes
Cell
<1
None
Read & Write
Yes
Cell
<1
None
Read & Write
Yes
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
Each RRU MO must have a unique combination of CN, Read Only SRN, and SN among all RRU MOs. Each RRU MO must have a unique combination of CN, Read Only SRN, and SN among all RRU MOs. Each RRU MO must have a unique combination of CN, Read Only SRN, and SN among all RRU MOs.
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
None
Read & Write
N/A
N/A
The RRU MO needs to be reset after the RT of this RRU MO is changed. In the RRU MO, RT must be set to Read & Write MRRU or LRRU when RS is set to LTE_TDD. In the RRU MO, RT must be set to MRRU when RS is set to WiMAX_LTE. None None Read Only Read Only
Yes
The cells carried on the RRU are <1 unavailable.
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
Yes
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
N/A
N/A
Yes
Cell
<1
None
Read & Write
Yes
Cell
<1
None
Read & Write
Yes
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
All MOs must be removed from the RRUCHAIN MO before the values of TT and BM in the RRUCHAIN MO are changed. In the RRUCHAIN MO, when TT is set to RING and this value needs to be changed, BRKPOS2 must be the same as the total number of MOs configured on the trunk of the Read & Write RRU chain or ring. In the RRUCHAIN MO, when TT is changed, BRKPOS1 must be set to 0. In the RRUCHAIN MO, when TT is set to RING or LOADBALANCE, WM in the BBP MO corresponding to HCN, HSRN, and HSN must be the same as the WM in the BBP MO corresponding to
Yes
The cells carried by the RRUs on the RRU chain/ring are unavailable.
After the command takes effect, the cells carried by the RRUs on the RRU chain/ring become available.
When TT in the RRUCHAIN MO is set to CHAIN, BM must be set to COLD. When TT in Read & Write the RRUCHAIN MO is set to RING, BM can be set to COLD or HOT.
Yes
In the RRUCHAIN MO, when TT is set to RING or LOADBALANCE, the combination of HCN, HSRN, HSN, and HPN cannot be the same as the combination of TCN, TSRN, TSN, and TPN. A RRUCHAIN MO must meet the following conditions: 1. When TT in the RRUCHAIN MO is set to RING or Read & Write LOADBALANCE, the CpriPort MO specified by the combination of HCN, HSRN, HSN, and HPN must be available; 2. When TT in the RRUCHAIN MO is set to RING or LOADBALANCE, the CpriPort MO specified by the combination of TCN, TSRN, TSN, and TPN must be available; 3. When
Yes
Yes
Yes
Yes
When TT in the RRUCHAIN MO is set to RING, TCN is valid. In the RRUCHAIN MO, when TT is set to RING or LOADBALANCE, the combination of HCN, HSRN, HSN, and HPN cannot be the same as the combination of TCN, TSRN, TSN, and TPN. A RRUCHAIN MO must meet the Read & Write following conditions: 1. When TT in the RRUCHAIN MO is set to RING or LOADBALANCE, the CpriPort MO specified by the combination of HCN, HSRN, HSN, and HPN must be available; 2. When TT in the RRUCHAIN MO is set to RING or LOADBALANCE, the CpriPort MO specified by the
Yes
When TT in the RRUCHAIN MO is set to RING, TSRN is valid. In the RRUCHAIN MO, when TT is set to RING or LOADBALANCE, the combination of HCN, HSRN, HSN, and HPN cannot be the same as the combination of TCN, TSRN, TSN, and TPN. A RRUCHAIN MO must meet the Read & Write following conditions: 1. When TT in the RRUCHAIN MO is set to RING or LOADBALANCE, the CpriPort MO specified by the combination of HCN, HSRN, HSN, and HPN must be available; 2. When TT in the RRUCHAIN MO is set to RING or LOADBALANCE, the CpriPort MO specified by the
Yes
When TT in the RRUCHAIN MO is set to RING, TSN is valid. In the RRUCHAIN MO, when TT is set to RING or LOADBALANCE, the combination of HCN, HSRN, HSN, and HPN cannot be the same as the combination of TCN, TSRN, TSN, and TPN. A RRUCHAIN MO must meet the Read & Write following conditions: 1. When TT in the RRUCHAIN MO is set to RING or LOADBALANCE, the CpriPort MO specified by the combination of HCN, HSRN, HSN, and HPN must be available; 2. When TT in the RRUCHAIN MO is set to RING or LOADBALANCE, the CpriPort MO specified by the
Yes
When TT in the RRUCHAIN MO is set to RING, TPN is valid. In the RRUCHAIN MO, when TT is set to RING or LOADBALANCE, the combination of HCN, HSRN, HSN, and HPN cannot be the same as the combination of TCN, TSRN, TSN, and TPN. A RRUCHAIN MO must meet the Read & Write following conditions: 1. When TT in the RRUCHAIN MO is set to RING or LOADBALANCE, the CpriPort MO specified by the combination of HCN, HSRN, HSN, and HPN must be available; 2. When TT in the RRUCHAIN MO is set to RING or LOADBALANCE, the CpriPort MO specified by the
Yes
In the RRUCHAIN MO, when TT is not set to CHAIN and BRKPOS1 is not set to 255, BRKPOS2 cannot be set to 255. In the RRUCHAIN MO, when TT is not set to CHAIN and BRKPOS1 is set to 255, BRKPOS2 must be set to 255. In the RRUCHAIN MO, when TT is not set to CHAIN, BRKPOS1 must be Read & Write smaller than or equal to BRKPOS2. If BRKPOS1 or BRKPOS2 in the RRUCHAIN MO is not set to 255, the values of BRKPOS1 and BRKPOS2 must be smaller than or equal to the total number of RRU and RFU MOs on the trunk of the RRU chain or ring. In a RRUCHAIN MO, when AT is set
Yes
The cells carried by the RRUs behind the breakpoint on the RRU chain become unavailable. The cells carried by the RRUs between breakpoints 1 and 2 on the RRU ring become unavailable.
The cells carried by the RRUs on the RRU chain/ring become available after the breakpoints are removed.
In the RRUCHAIN MO, when TT is set to CHAIN, BRKPOS2 must be set to 255. In the RRUCHAIN MO, when TT is not set to CHAIN and BRKPOS1 is not set to 255, BRKPOS2 cannot be set to 255. In the RRUCHAIN MO, when TT is not set to CHAIN and BRKPOS1 is set to 255, BRKPOS2 Read & Write must be set to 255. In the RRUCHAIN MO, when TT is not set to CHAIN, BRKPOS1 must be smaller than or equal to BRKPOS2. If BRKPOS1 or BRKPOS2 in the RRUCHAIN MO is not set to 255, the values of BRKPOS1 and BRKPOS2 must be smaller than or equal to the total number of RRU and
Yes
The cells carried by the RRUs between the breakpoints 1 and 2 on the RRU ring are unavailable.
The cells carried by the RRUs on the RRU chain/ring become available after the breakpoints are removed.
In a RRUCHAIN MO, when AT is set to PEERPORT, TT must be set to CHAIN. In the RRUCHAIN MO, HSN must be set to 2 or 3 if AT is set to PEERPORT. When AT in the RRUCHAIN is set to PEERPORT, the RS in the RRU on this RRUCHAIN must be set to LTE_FDD or UMTS_ONLY, or Read & Write UMTS_LTE, and the RT in the RRU on this RRUCHAIN must be set to MRRU or PRRU. In a RRUCHAIN MO, when AT is set to PEERPORT, CR must be set to AUTO. When AT in the RRUCHAIN MO is set to PEERPORT, the board specified by HSN must have not been configured.
N/A
N/A
N/A
None
Read & Write
Yes
Services are restored Cells carried on the immediately after RRU chain. the RRU finishes negotiating this rate with the BBU.
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
CN,SRN and SN in the RxBranch must meet the following conditions: 1.when CN is set to 0, SRN must be set to 4~5 or 60~254; 2.when CN is set to 1~62, Read Only SRN must be set to 4~5; 3.when SRN is set to 4~5, SN must be set to 0~8; 4.when SRN is set to 60~254, SN must be set to 0.
N/A
N/A
N/A
CN,SRN and SN in the RxBranch must meet the following conditions: 1.when CN is set to 0, SRN must be set to 4~5 or 60~254; 2.when CN is set to 1~62, Read Only SRN must be set to 4~5; 3.when SRN is set to 4~5, SN must be set to 0~8; 4.when SRN is set to 60~254, SN must be set to 0. CN,SRN and SN in the RxBranch must meet the following conditions: 1.when CN is set to 0, SRN must be set to 4~5 or 60~254; 2.when CN is set to 1~62, Read Only SRN must be set to 4~5; 3.when SRN is set to 4~5, SN must be set to 0~8; 4.when SRN is set to 60~254, SN must be set to 0. None Read Only
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
None
Read & Write
Yes
Services on the channel are affected.
When the logical switch of RX channel is ON
When the TMA MO is not used, ATTEN in the RxBranch MO is set to 0. When the 12dB TMA MO is used, the value of ATTEN Read & Write ranges from 4 dB to 11 dB. When the 24dB TMA MO is used, the value of ATTEN ranges from 11 dB to 22 dB.
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
CN, SRN and SN in the TxBranch must meet the following conditions: 1.when CN is set to 0, SRN must be set to 4~5 or 60~254; 2.when CN is set to 1~62, Read Only SRN must be set to 4~5; 3.when SRN is set to 4~5, SN must be set to 0~8; 4.when SRN is set to 60~254, SN must be set to 0. CN, SRN and SN in the TxBranch must meet the following conditions: 1.when CN is set to 0, SRN must be set to 4~5 or 60~254; 2.when CN is set to 1~62, Read Only SRN must be set to 4~5; 3.when SRN is set to 4~5, SN must be set to 0~8; 4.when SRN is set to 60~254, SN must be set to 0.
N/A
N/A
N/A
N/A
N/A
N/A
CN, SRN and SN in the TxBranch must meet the following conditions: 1.when CN is set to 0, SRN must be set to 4~5 or 60~254; 2.when CN is set to 1~62, Read Only SRN must be set to 4~5; 3.when SRN is set to 4~5, SN must be set to 0~8; 4.when SRN is set to 60~254, SN must be set to 0.
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
Yes
Services carried on the specified TX Less than 2 minutes channel
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None None
N/A N/A N/A
N/A N/A N/A
N/A N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
This parameter is valid only when Read Only MODE in the NtpCp MO is IPV4.
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
This parameter is valid only when Read Only MODE in the NtpCp MO is IPV6.
N/A
N/A
N/A
None
Read & Write
N/A
N/A
This parameter is valid only when AUTHMODE is set Read & Write to a value other than PLAIN.
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
This parameter is valid only when DST in the TZ MO is set to YES.
Read & Write
N/A
N/A
When DST in the TZ MO is set to YES, SMONTH should not be equal to EMONTH. Read & Write This parameter is valid only when DST in the TZ MO is set to YES and SM is DATEWEEK, DATE, or WEEK. When DST in the TZ MO is set to YES and SM is DATEWEEK, SDAY plus 6 should not be beyond the end of the month specified by SMONTH. When DST in the TZ MO is set to Read & Write YES and SM is DATE, if SMONTH is FEB, then SDAY should not be greater than 28. This parameter is valid only when DST in the TZ MO is set to YES and SM is DATEWEEK or DATE.
N/A
N/A
N/A
N/A
This parameter is valid only when DST in the TZ MO is set to YES and SM is WEEK.
Read & Write
N/A
N/A
This parameter is valid only when DST in the TZ MO Read & Write is set to YES and SM is DATEWEEK or WEEK.
N/A
N/A
Read & Write
N/A
N/A
Read & Write
N/A
N/A
This parameter is valid only when DST in the TZ MO is set to YES and EM is DATEWEEK, DATE, or WEEK. Read & Write When DST in the TZ MO is set to YES, SMONTH and EMONTH are not allowed to be identical.
N/A
N/A
When DST in the TZ MO is set to YES and EM is DATEWEEK, EDAY plus 6 should not be beyond the end of the month specified by EMONTH. This parameter is valid only when Read & Write DST in the TZ MO is set to YES and EM is DATEWEEK or DATE. When DST in the TZ MO is set to YES and EM is DATE, if EMONTH is FEB, then EDAY should not be greater than 28. This parameter is valid only when DST in the TZ MO Read & Write is set to YES and EM is WEEK. This parameter is valid only when DST in the TZ MO Read & Write is set to YES and EM is DATEWEEK or WEEK. This parameter is valid only when DST in the TZ MO is set to YES.
N/A
N/A
N/A
N/A
N/A
N/A
Read & Write
N/A
N/A
Read & Write
N/A
N/A
This parameter is valid only when ZONET in the TZ MO is set to CUSTOM.
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
In the FTPCLTPORT MO, Read Only SERVERIP cannot be set to 255.x.x.x.
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
In the ENodeBIntegrityC ap MO, the PrimaryIntegrityAl go, SecondIntegrityAl Read & Write go, and ThirdIntegrityAlgo parameters must be set to different values.
N/A
N/A
In the ENodeBIntegrityC ap MO, the PrimaryIntegrityAl go, SecondIntegrityAl Read & Write go, and ThirdIntegrityAlgo parameters must be set to different values.
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
In a CellDrxPara MO, the value of TddEnterDrxThdUl Read & Write must be smaller than that of TddExitDrxThdUl.
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
In a CellDrxPara MO, the value of TddEnterDrxThdDl Read & Write must be smaller than that of TddExitDrxThdDl.
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
If the threshold specified through this parameter is higher than the associated threshold for the coverage-based inter-RAT handover and the coveragebased handover is enabled, the Read & Write coverage-based handover takes precedence over both the load- and service-based handovers. In this case, the load- and service-based handovers would not occur.
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
1. The value of InterFreqHoA2ThdR srp must be smaller than that of InterFreqHoA1ThdR srp. 2. In an Read & Write InterFreqHoGroup MO, the value of InterFreqHoA1Thd Rsrp must be larger than or equal to InterFreqHoA2Thd Rsrp.
N/A
N/A
1. The value of InterFreqHoA2ThdR srq must be smaller than that of InterFreqHoA1ThdR srq. 2. In an Read & Write InterFreqHoGroup MO, the value of InterFreqHoA1Thd Rsrq must be larger than or equal to InterFreqHoA2Thd Rsrq.
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
Yes
eNodeB
None
Read & Write
Yes
eNodeB
None
Read & Write
Yes
eNodeB
None
Read Only
N/A
N/A
None
Read & Write
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
Yes
Cell
0.1
None
Read & Write
Yes
Cell
0.1
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
Yes
eNodeB
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
Yes
Cell
0.1
None
Read & Write
Yes
Cell
0.1
None
Read & Write
Yes
Cell
0.1
None
Read & Write
No (After an S1 interface is blocked, UEs in idle mode N/A cannot access the network.) N/A N/A
N/A
None
Read Only
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
Yes
eNodeB
0.1
None
Read & Write
Yes
eNodeB
0.1
None
Read & Write
Yes
eNodeB
0.1
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
If this parameter is set to REDIRECTION for a bearer with a QCI Read & Write of 1, call drop occurs during a redirection.
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
This parameter is valid only for QCIs 6 Read & Write to 9.
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
This parameter is valid only when the beamforming Read & Write algorithm is enabled.
N/A
N/A
This parameter is valid only when BfMimoAdaptiveSwi Read & Write tch is set to NO_ADAPTIVE.
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
This parameter is valid only when the beamforming Read & Write algorithm is disabled.
N/A
N/A
This parameter is valid only when MimoAdaptiveSwitc Read & Write h is set to NO_ADAPTIVE.
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
If this parameter is set to CFG, the AcBarringForEmerg ency, AcBarringForMoDat aCfgInd, and AcBarringForMoSig CfgInd parameters must be set. If this parameter is Read & Write set to NOT_CFG, the AcBarringForEmerg ency, AcBarringForMoDat aCfgInd, and AcBarringForMoSig CfgInd parameters do not need to be set.
No (For the UE in idle mode, this parameter is used with other parameters related to cell access barring to control the UE accesses.)
N/A
N/A
AcBarringForEmerg ency is optional, depending on the Read & Write setting of AcBarringInfoCfgIn d.
No (For the UE in idle mode, if it is BOOLEAN_TRUE, the emergency calls initiated by the UEs N/A of access categories 0 to 9 or UEs without IMSI are rejected.)
N/A
AcBarringForMoDat aCfgInd is optional, depending on the Read & Write setting of AcBarringInfoCfgIn d.
No (The access request of the mobile-originated call initiated by a UE in idle mode is accepted or rejected according to the corresponding barring status.)
N/A
N/A
AcBarringFactorFor Call is optional, depending on the Read & Write setting of AcBarringForMoDat aCfgInd.
No (For the UE in idle mode, the source call accesses are allowed only when N/A the random number generated by the UE is smaller than the access probability factor.)
N/A
AcBarTimeForCall is optional, depending on the Read & Write setting of AcBarringForMoDat aCfgInd.
N/A
N/A
AC11BarforCall is optional, depending on the setting of Read & Write AcBarringForMoDat aCfgInd.
No (For the UE in idle mode, if this parameter is set to BOOLEAN_TRUE, N/A UEs of access class 11 are not allowed to initiate calls.)
N/A
No (For the UE in idle mode, if this parameter is set to BOOLEAN_TRUE, the mobileN/A originated calls initiated by UEs of access class 12 are not allowed.)
N/A
N/A
N/A
N/A
1. If AcBarringForMoSig CfgInd is set to CFG, the following parameters need to be set: AcBarringFactorFor Sig, AcBarTimeForSig, AC11BarforSig, AC12BarforSig, AC13BarforSig, AC14BarforSig, and AC15BarforSig. If AcBarringForMoSig CfgInd is set to Read & Write CFG, the following parameters do not need to be set: AcBarringFactorFor Sig, AcBarTimeForSig, AC11BarforSig, AC12BarforSig, AC13BarforSig, AC14BarforSig, and AC15BarforSig. 2. AcBarringForMoSig CfgInd is optional, depending on the setting of AcBarringInfoCfgIn
No (The access request of the signaling initiated by a UE in idle mode is accepted or N/A rejected according to the corresponding barring status.)
N/A
AcBarringFactorFor Sig is optional, depending on the Read & Write setting of AcBarringForMoSig CfgInd.
No (The signaling initiated by a UE in idle mode is granted access only when the random number N/A generated by the UE is smaller than the access probability factor.)
N/A
AcBarTimeForSig is optional, depending on the setting of Read & Write AcBarringForMoSig CfgInd.
N/A
N/A
AC11BarForSig is optional, depending on the setting of Read & Write AcBarringForMoSig CfgInd.
No (For the UE in idle mode, if this parameter is set to BOOLEAN_TRUE, N/A the signaling access initiated by UEs of access class 11 are not allowed.)
N/A
N/A
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
No (Modifications on this parameter will affect the cell on N/A which the UE in idle mode camps.)
N/A
None
Read & Write
N/A
N/A
None
Read & Write
No (Modifications on this parameter will affect the cell on N/A which the UE in idle mode camps.)
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
Yes
Cell
0.1
None
Read & Write
Yes
Cell
0.1
None
Read & Write
Yes
Cell
0.1
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
No (Modifications on this parameter would affect cell reselection of the UE in idle mode.)
N/A
N/A
If SpeedDepReselCfg Ind is set to CFG, the following parameters must be set: TEvaluation, THystNormal, NCellChangeMediu m, NCellChangeHigh, QHystSfMedium and QHystSfHigh. If Read & Write SpeedDepReselCfg Ind is set to NOT_CFG, the following parameters do not need to be set: TEvaluation, THystNormal, NCellChangeMediu m, NCellChangeHigh, QHystSfMedium and QHystSfHigh.
N/A
N/A
This parameter is optional, depending on the setting of SpeedDepReselCfg Ind. If SpeedDepReselCfg Ind is set to CFG, Read & Write TEvaluation must be set. If SpeedDepReselCfg Ind is set to NOT_CFG, TEvaluation does not need to be set.
N/A
N/A
This parameter is optional, depending on the setting of SpeedDepReselCfg Ind. If SpeedDepReselCfg Ind is set to CFG, Read & Write THystNormal must be set. If SpeedDepReselCfg Ind is set to NOT_CFG, THystNormal does not need to be set.
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
This parameter is optional, depending on the setting of SpeedDepReselCfg Ind. If SpeedDepReselCfg Ind is set to CFG, QHystSfMedium Read & Write must be set. If SpeedDepReselCfg Ind is set to NOT_CFG, QHystSfMedium does not need to be set.
N/A
N/A
This parameter is optional, depending on the setting of SpeedDepReselCfg Ind. If SpeedDepReselCfg Ind is set to CFG, Read & Write QHystSfHigh must be set. If SpeedDepReselCfg Ind is set to NOT_CFG, QHystSfHigh does not need to be set. If SNonIntraSearchCf gInd is set to CFG, SNonIntraSearch must be set. If Read & Write SNonIntraSearchCf gInd is set to NOT_CFG, SNonIntraSearch does not need to be set.
N/A
N/A
N/A
N/A
This parameter is optional, depending on the setting of SNonIntraSearchCf gInd. If SNonIntraSearchCf gInd is set to CFG, SNonIntraSearch Read & Write needs to be set. If SNonIntraSearchCf gInd is set to NOT_CFG, SNonIntraSearch does not need to be set.
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
No (Modifications on this parameter will affect cell reselection of the UE in idle mode.)
N/A
N/A
None
Read & Write
N/A
N/A
If PMaxCfgInd is set to CFG, PMax must be set. If PMaxCfgInd is set Read & Write to NOT_CFG, PMax does not need to be set.
N/A
N/A
This parameter is optional, depending on the setting of PMaxCfgInd. If PMaxCfgInd is set to CFG, PMax must Read & Write be set. If PMaxCfgInd is set to NOT_CFG, PMax does not need to be set.
N/A
N/A
If SIntraSearchCfgInd is set to CFG, SIntraSearch must be set. Read & Write If SIntraSearchCfgInd is set to NOT_CFG, SIntraSearch does not need to be set. This parameter is optional, depending on the setting of SIntraSearchCfgInd . If SIntraSearchCfgInd is set to CFG, Read & Write SIntraSearch needs to be set. If SIntraSearchCfgInd is set to NOT_CFG, SIntraSearch does not need to be set. If MeasBandWidthCfg Ind is set to CFG, MeasBandWidth must be set. If Read & Write MeasBandWidthCfg Ind is set to NOT_CFG, MeasBandWidth does not need to be set.
N/A
N/A
N/A
N/A
N/A
N/A
This parameter is optional, depending on the setting of MeasBandWidthCfg Ind. If MeasBandWidthCfg Ind is set to CFG, MeasBandWidth Read & Write must be set. If MeasBandWidthCfg Ind is set to NOT_CFG, MeasBandWidth does not need to be set.
N/A
N/A
None
Read & Write
N/A
N/A
If SpeedStateSfCfgIn d is set to CFG, the following parameters must be set: TReselEutranSfMe dium and TReselEutranSfHig h. If Read & Write SpeedStateSfCfgIn d is set to NOT_CFG, the following parameters do not need to be set: TReselEutranSfMe dium and TReselEutranSfHig h. This parameter is optional, depending on the setting of SpeedStateSfCfgIn d. If SpeedStateSfCfgIn d is set to CFG, TReselEutranSfMe Read & Write dium must be set. If SpeedStateSfCfgIn d is set to NOT_CFG, TReselEutranSfMe dium does not need to be set. This parameter is optional, depending on the setting of the SpeedStateSfCfgIn d parameter. If SpeedStateSfCfgIn d is set to CFG, TReselEutranSfHig Read & Write h must be set. If SpeedStateSfCfgIn d is set to NOT_CFG, TReselEutranSfHig h does not need to be set.
N/A
N/A
N/A
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
If ThrshServLowQCfg Ind is set to CFG, this parameter must be set. If Read & Write ThrshServLowQCfg Ind is set to NOT_CFG, this parameter does not need to be set
N/A
N/A
This parameter is optional, depending on the setting of ThrshServLowQCfg Ind. If ThrshServLowQCfg Ind is set to CFG, Read & Write this parameter must be set. If ThrshServLowQCfg Ind is set to NOT_CFG, this parameter does not need to be set If QQualMinCfgInd is set to CFG, this parameter must be set. Read & Write If QQualMinCfgInd is set to NOT_CFG, this parameter does not need to be set.
N/A
N/A
N/A
N/A
This parameter is optional, depending on the setting of QQualMinCfgInd. If QQualMinCfgInd is set to CFG, this Read & Write parameter must be set. If QQualMinCfgInd is set to NOT_CFG, this parameter does not need to be set.
N/A
N/A
None
Read Only
N/A
N/A
N/A
If SysTimeCfgInd is set to CFG, CdmaEutraSyn must be set. If SysTimeCfgInd is Read & Write set to NOT_CFG, CdmaEutraSyn does not need to be set.
N/A
N/A
This parameter is optional, depending on the setting of SysTimeCfgInd. If SysTimeCfgInd is set to CFG, CdmaEutraSyn Read & Write must be set. If SysTimeCfgInd is set to NOT_CFG, CdmaEutraSyn does not need to be set.
N/A
N/A
If SearchWndSizeCfg Ind is set to CFG, SearchWndSize must be set. If Read & Write SearchWndSizeCfg Ind is set to NOT_CFG, SearchWndSize does not need to be set.
N/A
N/A
This parameter is optional, depending on the setting of SearchWndSizeCfg Ind. If SearchWndSizeCfg Ind is set to CFG, SearchWndSize Read & Write must be set. If SearchWndSizeCfg Ind is set to NOT_CFG, SearchWndSize does not need to be set. If HrpdParamCfgInd is set to CFG, the following parameters must be set: HrpdPreRegistAllow ed, HrpdSecondPreReg istZoneId0Ind, and HrpdCellReselectPa ramCfgInd. Read & Write If HrpdParamCfgInd is set to NOT_CFG, the following parameters do not need to be set: HrpdPreRegistAllow ed, HrpdSecondPreReg istZoneId0Ind, and HrpdCellReselectPa ramCfgInd.
N/A
N/A
N/A
N/A
1. This parameter is optional, depending on the setting of HrpdParamCfgInd. If HrpdParamCfgInd is set to CFG, HrpdCellReselectPa ramCfgInd must be set. If HrpdParamCfgInd is set to NOT_CFG, HrpdCellReselectPa ramCfgInd does not need to be set. 2 If HrpdCellReselectPa ramCfgInd is set to Read & Write CFG, the following parameters must be set: TreselectionHrpd and SpeedStateSfCfgIn d. If HrpdCellReselectPa ramCfgInd is set to NOT_CFG, the following parameters do not need to be set: TreselectionHrpd and SpeedStateSfCfgIn
N/A
N/A
1. If HrpdPreRegistAllow ed is set to BOOLEAN_TRUE, HrpdPreRegistZone Id must be set. If HrpdPreRegistAllow ed is set to BOOLEAN_FALSE, HrpdPreRegistZone Id does not need to be set. Read & Write 2. This parameter is optional, depending on the setting of HrpdParamCfgInd. If HrpdParamCfgInd is set to CFG, HrpdPreRegistAllow ed must be set. If HrpdParamCfgInd is set to NOT_CFG, HrpdPreRegistAllow ed does not need to be set. This parameter is optional, depending on the setting of HrpdPreRegistAllow ed. If HrpdPreRegistAllow ed is set to BOOLEAN_TRUE, Read & Write HrpdPreRegistZone Id must be set. If HrpdPreRegistAllow ed is set to BOOLEAN_FALSE, HrpdPreRegistZone Id does not need to be set.
N/A
N/A
N/A
N/A
1. This parameter is optional, depending on the setting of HrpdParamCfgInd. If HrpdParamCfgInd is set to CFG, HprdSecondPreReg istZoneId0Ind must be set. If HrpdParamCfgInd is set to NOT_CFG, HprdSecondPreReg istZoneId0Ind does not need to be set. 2. If HrpdSecondPreReg istZoneId0Ind is set Read & Write to CFG, the following parameters must be set: HrpSecondPreRegi stZoneId0 and HrpdSecondPreReg istZoneId1Ind. If HrpdSecondPreReg istZoneId0Ind is set to NOT_CFG, the following parameters do not need to be set: HrpdSecondPreReg istZoneId0 and 1. This parameter is optional, depending on the setting of HprdSecondPreReg istZoneId0Ind. If HprdSecondPreReg istZoneId0Ind is set to CFG, HprdSecondPreReg Read & Write istZoneId0 must be set. If HprdSecondPreReg istZoneId0Ind is set to NOT_CFG, HprdSecondPreReg istZoneId0 does not need to be set.
N/A
N/A
N/A
N/A
1. This parameter is optional, depending on the setting of HrpdSecondPreReg istZoneId0Ind. If HrpdSecondPreReg istZoneId0Ind is set to CFG, HrpdSecondPreReg istZoneId1Ind must be set. If HrpdSecondPreReg istZoneId0Ind is set to NOT_CFG, HrpdSecondPreReg Read & Write istZoneId1Ind does not need to be set. 2. If HrpdSecondPreReg istZoneId1Ind is set to CFG, HrpdSecondPreReg istZoneId1 must be set. If HrpdSecondPreReg istZoneId1Ind is set to NOT_CFG, HrpdSecondPreReg istZoneId1 does not need to be set. This parameter is optional, depending on the setting of HprdSecondPreReg istZoneId1Ind. If HprdSecondPreReg istZoneId1Ind is set to CFG, HprdSecondPreReg Read & Write istZoneId1 must be set. If HprdSecondPreReg istZoneId1Ind is set to NOT_CFG, HprdSecondPreReg istZoneId1 does not need to be set.
N/A
N/A
N/A
N/A
This parameter is optional, depending on the setting of HrpdCellReselectPa ramCfgInd. If HrpdCellReselectPa ramCfgInd is set to CFG, Read & Write TreselectionHrpd must be set. If HrpdCellReselectPa ramCfgInd is set to NOT_CFG, TreselectionHrpd does not need to be set.
N/A
N/A
1. This parameter is optional, depending on the setting of HrpdCellReselectPa ramCfgInd. If HrpdCellReselectPa ramCfgInd is set to CFG, SpeedStateSfCfgIn d must be set. If HrpdCellReselectPa ramCfgInd is set to NOT_CFG, SpeedStateSfCfgIn d does not need to Read & Write be set. 2 If SpeedStateSfCfgIn d is set to CFG, the following parameters must be set: TReselCdmaHrpdSf Medium and TReselCdmaHrpdSf High. If SpeedStateSfCfgIn d is set to NOT_CFG, the following parameters do not
N/A
N/A
This parameter is optional, depending on the setting of SpeedStateSfCfgIn d. If SpeedStateSfCfgIn d is set to CFG, TReselCdmaHprdSf Read & Write High must be set. If SpeedStateSfCfgIn d is set to NOT_CFG, TReselCdmaHprdSf High does not need to be set.
N/A
N/A
This parameter is optional, depending on the setting of SpeedStateSfCfgIn d. If SpeedStateSfCfgIn d is set to CFG, TReselCdmaHrpdSf Read & Write Medium must be set. If SpeedStateSfCfgIn d is set to NOT_CFG, TReselCdmaHrpdSf Medium does not need to be set.
N/A
N/A
If Cdma1XrttCfgInd is set to CFG, the following parameters must be set: Cdma1XrttCsfbReg CfgInd, Cdma1XrttLongCod eStateCfgInd, and Cdma1XrttCellRese lCfgInd. Read & Write If Cdma1XrttCfgInd is set to NOT_CFG, the following parameters do not need to be set: Cdma1XrttCsfbReg CfgInd, Cdma1XrttLongCod eStateCfgInd, and Cdma1XrttCellRese lCfgInd.
N/A
N/A
1. If Cdma1XrttCsfbReg CfgInd is set to CFG, the following parameters need to be set: Cdma1XrttCsfbReg Sid, Cdma1XrttCsfbReg Nid, Cdma1XrttCsfbReg MultiSidInd, Cdma1XrttCsfbReg MultiNidInd, Cdma1XrttCsfbReg HomeRegInd, Cdma1XrttCsfbReg Read & Write ForeignSidRegInd, Cdma1XrttCsfbReg ForeignNidRegInd, Cdma1XrttCsfbReg ParamRegInd, Cdma1XrttCsfbReg PowerUpRegInd, Cdma1XrttCsfbReg RegPeriod, Cdma1XrttCsfbReg RegZone, Cdma1XrttCsfbReg TotalZone, Cdma1XrttCsfbReg ZoneTimer, Cdma1XrttCsfbPwr DownRegInd, and This parameter is optional, depending on the setting of Cdma1XrttCsfbReg CfgInd. If Cdma1XrttCsfbReg CfgInd is set to CFG, Read & Write Cdma1XrttCsfbReg Sid must be set. If Cdma1XrttCsfbReg CfgInd is set to NOT_CFG, Cdma1XrttCsfbReg Sid does not need to be set.
N/A
N/A
N/A
N/A
This parameter is optional, depending on the setting of Cdma1XrttCsfbReg CfgInd. If Cdma1XrttCsfbReg CfgInd is set to CFG, Read & Write Cdma1XrttCsfbReg Nid must be set. If Cdma1XrttCsfbReg CfgInd is set to NOT_CFG, Cdma1XrttCsfbReg Nid does not need to be set. Cdma1XrttCsfbReg MultiSidInd is optional, depending on the setting of Cdma1XrttCsfbReg CfgInd. If Cdma1XrttCsfbReg CfgInd is set to CFG, Read & Write Cdma1XrttCsfbReg MultiSidInd must be set. If Cdma1XrttCsfbReg CfgInd is set to NOT_CFG, Cdma1XrttCsfbReg MultiSidInd does not need to be set.
N/A
N/A
N/A
N/A
Cdma1XrttCsfbReg MultiNidInd is optional, depending on the setting of Cdma1XrttCsfbReg CfgInd. If Cdma1XrttCsfbReg CfgInd is set to CFG, Read & Write Cdma1XrttCsfbReg MultiNidInd must be set. If Cdma1XrttCsfbReg CfgInd is set to NOT_CFG, Cdma1XrttCsfbReg MultiNidInd does not need to be set. Cdma1XrttCsfbReg HomeRegInd is optional, depending on the setting of Cdma1XrttCsfbReg CfgInd. If Cdma1XrttCsfbReg CfgInd is set to CFG, Read & Write Cdma1XrttCsfbReg HomeRegInd must be set. If Cdma1XrttCsfbReg CfgInd is set to NOT_CFG, Cdma1XrttCsfbReg HomeRegInd does not need to be set.
N/A
N/A
N/A
N/A
Cdma1XrttCsfbReg FrgnSidRegInd is optional, depending on the setting of Cdma1XrttCsfbReg CfgInd. If Cdma1XrttCsfbReg CfgInd is set to CFG, Cdma1XrttCsfbReg Read & Write FrgnSidRegInd must be set. If Cdma1XrttCsfbReg CfgInd is set to NOT_CFG, Cdma1XrttCsfbReg FrgnSidRegInd does not need to be set. Cdma1XrttCsfbReg FrgnNidRegInd is optional, depending on the setting of Cdma1XrttCsfbReg CfgInd. If Cdma1XrttCsfbReg CfgInd is set to CFG, Cdma1XrttCsfbReg Read & Write FrgnNidRegInd must be set. If Cdma1XrttCsfbReg CfgInd is set to NOT_CFG, Cdma1XrttCsfbReg FrgnNidRegInd does not need to be set.
N/A
N/A
N/A
N/A
Cdma1XrttCsfbReg ParamRegInd is optional, depending on the setting of Cdma1XrttCsfbReg CfgInd. If Cdma1XrttCsfbReg CfgInd is set to CFG, Read & Write Cdma1XrttCsfbReg ParamRegInd must be set. If Cdma1XrttCsfbReg CfgInd is set to NOT_CFG, Cdma1XrttCsfbReg ParamRegInd does not need to be set. Cdma1XrttCsfbReg PowerUpRegInd is optional, depending on the setting of Cdma1XrttCsfbReg CfgInd. If Cdma1XrttCsfbReg CfgInd is set to CFG, Cdma1XrttCsfbReg Read & Write PowerUpRegInd must be set. If Cdma1XrttCsfbReg CfgInd is set to NOT_CFG, Cdma1XrttCsfbReg PowerUpRegInd does not need to be set.
N/A
N/A
N/A
N/A
This parameter is optional, depending on the setting of Cdma1XrttCsfbReg CfgInd. If Cdma1XrttCsfbReg CfgInd is set to CFG, Cdma1XrttCsfbReg Read & Write RegPeriod must be set. If Cdma1XrttCsfbReg CfgInd is set to NOT_CFG, Cdma1XrttCsfbReg RegPeriod does not need to be set. This parameter is optional, depending on the setting of Cdma1XrttCsfbReg CfgInd. If Cdma1XrttCsfbReg CfgInd is set to CFG, Cdma1XrttCsfbReg Read & Write RegZone must be set. If Cdma1XrttCsfbReg CfgInd is set to NOT_CFG, Cdma1XrttCsfbReg RegZone does not need to be set.
N/A
N/A
N/A
N/A
This parameter is optional, depending on the setting of Cdma1XrttCsfbReg CfgInd. If Cdma1XrttCsfbReg CfgInd is set to CFG, Cdma1XrttCsfbReg Read & Write TotalZone must be set. If Cdma1XrttCsfbReg CfgInd is set to NOT_CFG, Cdma1XrttCsfbReg TotalZone does not need to be set. This parameter is optional, depending on the setting of Cdma1XrttCsfbReg CfgInd. If Cdma1XrttCsfbReg CfgInd is set to CFG, Cdma1XrttCsfbReg Read & Write ZoneTimer must be set. If Cdma1XrttCsfbReg CfgInd is set to NOT_CFG, Cdma1XrttCsfbReg ZoneTimer does not need to be set.
N/A
N/A
N/A
N/A
1. If Cdma1XrttLongCod eStateCfgInd is set to CFG, Cdma1XrttLongCod eState must be set. If Cdma1XrttLongCod eStateCfgInd is set to NOT_CFG, Cdma1XrttLongCod eState does not need to be set. 2. Cdma1XrttLongCod Read & Write eStateCfgInd is optional, depending on the setting of Cdma1XrttCfgInd. If Cdma1XrttCfgInd is set to CFG, Cdma1XrttLongCod eStateCfgInd must be set. If Cdma1XrttCfgInd is set to NOT_CFG, Cdma1XrttLongCod eStateCfgInd does not need to be set. This parameter is optional, depending on the setting of Cdma1XrttLongCod eStateCfgInd. If Cdma1XrttLongCod eStateCfgInd is set to CFG, Read & Write Cdma1XrttLongCod eState must be set. If Cdma1XrttLongCod eStateCfgInd is set to NOT_CFG, Cdma1XrttLongCod eState does not need to be set.
N/A
N/A
N/A
N/A
1. Cdma1XrttCellRese lCfgInd is optional, depending on the setting of Cdma1XrttCfgInd. If Cdma1XrttCfgInd is set to CFG, Cdma1XrttCellRese lCfgInd must be set. If Cdma1XrttCfgInd is set to NOT_CFG, Cdma1XrttCellRese lCfgInd does not need to be set. 2. If Cdma1XrttCellRese Read & Write lCfgInd is set to CFG, the following parameters must be set: Cdma1XrttTreselect ion and Cdma1XrttSpeedSt ateCfgInd. If Cdma1XrttCellRese lCfgInd is set to NOT_CFG, the following parameters do not need to be set: Cdma1XrttTreselect ion and This parameter is optional, depending on the setting of Cdma1XrttCellRese lCfgInd. If Cdma1XrttCellRese lCfgInd is set to CFG, Read & Write Cdma1XrttTreselect ion must be set. If Cdma1XrttCellRese lCfgInd is set to NOT_CFG, Cdma1XrttTreselect ion does not need to be set.
N/A
N/A
N/A
N/A
1. Cdma1XrttSpeedSt ateCfgInd is optional, depending on the setting of Cdma1XrttCellRese lCfgInd. If Cdma1XrttCellRese lCfgInd is set to CFG, Cdma1XrttSpeedSt ateCfgInd must be set. If Cdma1XrttCellRese lCfgInd is set to Read & Write NOT_CFG, Cdma1XrttSpeedSt ateCfgInd does not need to be set. 2. If Cdma1XrttSpeedSt ateCfgInd is set to CFG, the following parameters must be set: Cdma1XrttSfMediu m and Cdma1XrttSfHigh. If Cdma1XrttSpeedSt ateCfgInd is set to NOT_CFG, the This parameter is optional, depending on the setting of Cdma1XrttSpeedSt ateCfgInd. If Cdma1XrttSpeedSt ateCfgInd is set to CFG, Read & Write Cdma1XrttSfMediu m must be set. If Cdma1XrttSpeedSt ateCfgInd is set to NOT_CFG, Cdma1XrttSfMediu m does not need to be set.
N/A
N/A
N/A
N/A
This parameter is optional. Whether to set this parameter is determined by the parameter Cdma1XrttSpeedSt ateCfgInd. When Cdma1XrttSpeedSt ateCfgInd is set to Read & Write CFG, Cdma1XrttSfHigh needs to be set. When Cdma1XrttSpeedSt ateCfgInd is set to NOT_CFG, Cdma1XrttSfHigh does not need to be set. CsfbRegPwrDownR egCfgInd is optional, depending on the setting of Cdma1XrttCsfbReg CfgInd. If Cdma1XrttCsfbReg CfgInd is set to CFG, Read & Write CsfbRegPwrDownR egCfgInd needs to be set. If Cdma1XrttCsfbReg CfgInd is set to NOT_CFG, CsfbRegPwrDownR egCfgInd does not need to be set.
N/A
N/A
N/A
N/A
1. CsfbAcBarCfgInd is optional, depending on the setting of Cdma1XrttCsfbReg CfgInd. If Cdma1XrttCsfbReg CfgInd is set to CFG, CsfbAcBarCfgInd needs to be set. If Cdma1XrttCsfbReg CfgInd is set to NOT_CFG, CsfbAcBarCfgInd Read & Write does not need to be set. 2. If CsfbAcBarCfgInd is set to CFG, the following parameters need to be set: CsfbAcBar0to9, CsfbAcBar10, CsfbAcBar11, CsfbAcBar12, CsfbAcBar13, CsfbAcBar14, CsfbAcBar15, CsfbAcBarMsg, CsfbAcBarReg, and CsfbAcBar0to9 is optional, depending on the setting of CsfbAcBarCfgInd. If CsfbAcBarCfgInd is set to CFG, CsfbAcBar0to9 Read & Write needs to be set. If CsfbAcBarCfgInd is set to NOT_CFG, CsfbAcBar0to9 does not need to be set.
N/A
N/A
N/A
N/A
CsfbAcBar10 is optional, depending on the setting of CsfbAcBarCfgInd. If CsfbAcBarCfgInd is set to CFG, Read & Write CsfbAcBar10 needs to be set. If CsfbAcBarCfgInd is set to NOT_CFG, CsfbAcBar10 does not need to be set. CsfbAcBar11 is optional, depending on the setting of CsfbAcBarCfgInd. If CsfbAcBarCfgInd is set to CFG, Read & Write CsfbAcBar11 needs to be set. If CsfbAcBarCfgInd is set to NOT_CFG, CsfbAcBar11 does not need to be set. CsfbAcBar12 is optional, depending on the setting of CsfbAcBarCfgInd. If CsfbAcBarCfgInd is set to CFG, Read & Write CsfbAcBar12 needs to be set. If CsfbAcBarCfgInd is set to NOT_CFG, CsfbAcBar12 does not need to be set. CsfbAcBar13 is optional, depending on the setting of CsfbAcBarCfgInd. If CsfbAcBarCfgInd is set to CFG, Read & Write CsfbAcBar13 needs to be set. If CsfbAcBarCfgInd is set to NOT_CFG, CsfbAcBar13 does not need to be set.
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
CsfbAcBar14 is optional, depending on the setting of CsfbAcBarCfgInd. If CsfbAcBarCfgInd is set to CFG, Read & Write CsfbAcBar14 needs to be set. If CsfbAcBarCfgInd is set to NOT_CFG, CsfbAcBar14 does not need to be set. CsfbAcBar15 is optional, depending on the setting of CsfbAcBarCfgInd. If CsfbAcBarCfgInd is set to CFG, Read & Write CsfbAcBar15 needs to be set. If CsfbAcBarCfgInd is set to NOT_CFG, CsfbAcBar15 does not need to be set. CsfbAcBarMsg is optional, depending on the setting of CsfbAcBarCfgInd. If CsfbAcBarCfgInd is set to CFG, CsfbAcBarMsg Read & Write needs to be set. If CsfbAcBarCfgInd is set to NOT_CFG, CsfbAcBarMsg does not need to be set. CsfbAcBarReg is optional, depending on the setting of CsfbAcBarCfgInd. If CsfbAcBarCfgInd is set to CFG, CsfbAcBarReg Read & Write needs to be set. If CsfbAcBarCfgInd is set to NOT_CFG, CsfbAcBarReg does not need to be set.
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
CsfbAcBarEmg is optional, depending on the setting of CsfbAcBarCfgInd. If CsfbAcBarCfgInd is set to CFG, CsfbAcBarEmg Read & Write needs to be set. If CsfbAcBarCfgInd is set to NOT_CFG, CsfbAcBarEmg does not need to be set.
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
If SpeedStateSfCfgIn d is set to CFG, the following parameters must be set: TReselGeranSfMed ium and TReselGeranSfHigh . Read & Write If SpeedStateSfCfgIn d is set to NOT_CFG, the following parameters do not need to be set: TReselGeranSfMed ium and TReselGeranSfHigh
N/A
N/A
This parameter is optional, depending on the setting of SpeedStateSfCfgIn d. If SpeedStateSfCfgIn d is set to CFG, TReselGeranSfMed Read & Write ium must be set. If SpeedStateSfCfgIn d is set to NOT_CFG, TReselGeranSfMed ium does not need to be set.
N/A
N/A
This parameter is optional, depending on the setting of SpeedStateSfCfgIn d. If SpeedStateSfCfgIn d is set to CFG, TReselGeranSfHigh Read & Write must be set. If SpeedStateSfCfgIn d is set to NOT_CFG, TReselGeranSfHigh does not need to be set.
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
If SpeedStateSfCfgIn d is set to CFG, the following parameters must be set: TReselUtranSfMedi um and TReselUtranSfHigh. If Read & Write SpeedStateSfCfgIn d is set to NOT_CFG, the following parameters do not need to be set: TReselUtranSfMedi um and TReselUtranSfHigh.
N/A
N/A
This parameter is optional, depending on the setting of the SpeedStateSfCfgIn d parameter. If SpeedStateSfCfgIn d is set to CFG, TReselUtranSfMedi Read & Write um must be set. If SpeedStateSfCfgIn d is set to NOT_CFG, TReselUtranSfMedi um does not need to be set.
N/A
N/A
This parameter is optional, depending on the setting of the SpeedStateSfCfgIn d parameter. If SpeedStateSfCfgIn d is set to CFG, TReselUtranSfHigh Read & Write must be set. If SpeedStateSfCfgIn d is set to NOT_CFG, TReselUtranSfHigh does not need to be set.
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
No (Modifications on this parameter would affect cell N/A selection of the UE in idle mode.)
N/A
If QQualMinOffsetCfg Ind is set to CFG, this parameter must be set. If Read & Write QQualMinOffsetCfg Ind is set to NOT_CFG, this parameter does not need to be set.
N/A
This parameter is optional, depending on the setting of QQualMinOffsetCfg Ind. If QQualMinOffsetCfg Ind is set to CFG, Read & Write this parameter must be set. If QQualMinOffsetCfg Ind is set to NOT_CFG, this parameter does not need to be set.
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
In the Cell MO, the value of CellName is a string of a maximum of 99 characters. The string cannot be all null characters or contain any of the following characters:double quotation marks ("), Read & Write commas (,), semicolons (;), equal signs (=), single quotation marks ('), three plus signs (+++), two or more consecutive spaces, and two or more consecutive percentage signs (%).
N/A
N/A
None
Read & Write
Yes
Cell
0.1
None
Read & Write
Yes
Cell
0.1
None
Read & Write
Yes
Cell
0.1
None
Read & Write
Yes
Cell
0.1
None
Read & Write
Yes
Cell
0.1
1. If UlEarfcnCfgInd is set to CFG, UlEarfcn must be set; If UlEarfcnCfgInd is set to NOT_CFG, UlEarfcn does not need to be set. 2. In the Cell MO, if Read & Write FddTddInd is set to CELL_TDD and UlEarfcnCfgInd is set to CFG, DlEarfcn and UlEarfcn must be set to the same value.
Yes
Cell
0.1
None
Read & Write
Yes
Cell
0.1
None
Read & Write
Yes
Cell
0.1
None
Read & Write
Yes
Cell
0.1
None
Read & Write
Yes
Cell
0.1
None
Read & Write
Yes
Cell
0.1
None
Read & Write
Yes
Cell
0.1
None
Read & Write
N/A
N/A
None
Read & Write
Yes
Cell
Until the cell is activated
None
Read & Write
Yes
Cell
Until the cell is unblocked
This parameter needs to be specified only when Read & Write the middle priority block is performed
N/A
N/A
None
Read & Write
Yes
Cell
0.1
None
Read & Write
Yes
Cell
0.1
None
Read & Write
Yes
Cell
0.1
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
Yes
Cell
0.1
None
Read & Write
Yes
Cell
0.1
None
Read & Write
Yes
Cell
0.1
None
Read & Write
Yes
Cell
0.1
None
Read & Write
Yes
Cell
0.1
None
Read & Write
Yes
Cell
0.1
None
Read & Write
Yes
Cell
0.1
If EmergencyAreaIdCf gInd is set to CFG, EmergencyAreaId must be set. If Read & Write EmergencyAreaIdCf gInd is set to NOT_CFG, EmergencyAreaId does not need to be set. EmergencyAreaId is optional, depending on the setting of EmergencyAreaIdCf gInd. If EmergencyAreaIdCf gInd is set to CFG, EmergencyAreaId Read & Write must be set. If EmergencyAreaIdCf gInd is set to NOT_CFG, EmergencyAreaId does not need to be set. If UePowerMaxCfgInd is set to CFG, UePowerMax must be set. Read & Write If UePowerMaxCfgInd is set to NOT_CFG, UePowerMax does not need to be set.
N/A
N/A
N/A
N/A
N/A
N/A
This parameter is optional, depending on the setting of the UePowerMaxCfgInd parameter. If UePowerMaxCfgInd is set to CFG, Read & Write UePowerMax must be set. If UePowerMaxCfgInd is set to NOT_CFG, UePowerMax does not need to be set.
N/A
N/A
None
Read & Write
Yes
Cell
0.1
None
Read & Write
Yes
Cell
0.1
None
Read & Write
Yes
Cell
0.1
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
If the CioAdjLimitCfgInd parameter is set to CFG, the CioAdjLowerLimit and CioAdjUpperLimit parameters need to be set. Read & Write If the CioAdjLimitCfgInd parameter is set to NOT_CFG, the CioAdjLowerLimit and CioAdjUpperLimit parameters do not need to be set.
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
PresenceAntennaP ort1 must be set as Read & Write required.
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
Yes
Cell
0.1
None
Read & Write
Yes
Cell
0.1
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
1. Let A be the value of UlBandWidth in the Cell MO, B the even number that HoppingOffset in the PUSCHCFG MO is rounded up to, and C the difference between A and B. If UlHoppingType in the CellUlschAlgo MO is set to HOPPING_TYPE1, C must be greater than UlBandWidth Read & Write in the Cell MO modulo 2. If UlHoppingType in the CellUlschAlgo MO is set to HOPPING_TYPE2 or HOPPING_TYPE2_ RANDOM, C modulo Nsb in the PUSCHCfg MO must be greater than 0. 2. If the switch for uplink ICIC in the frequency domain is turned on,
Yes
Cell
0.1
None
Read & Write
Yes
Cell
0.1
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
N/A
None
Read & Write
N/A
N/A
N/A
None
Read & Write
N/A
N/A
N/A
None
Read & Write
N/A
N/A
N/A
None
Read & Write
N/A
N/A
N/A
None
Read & Write
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
If PrachConfigIndexCf gInd in the RACHCfg MO is set to NOT_CFG and RachAdjSwitch is turned on, the Read & Write RACH resources in the cell can be adaptively adjusted based on the access type and the number of access attempts.
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
Yes
Cell
0.1
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
Yes
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
Yes
Cell
0.1
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
Yes
Cell
0.1
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
This parameter must be properly set so that two conditions are met: (1) The PRACH RBs are strictly confined in the cell bandwidth; (2) The Read & Write PRACH RBs and PUCCH RBs do not overlap. This parameter is valid only if PucchAlgoSwitch in the CellAlgoSwitch MO is turned off.
Yes
Cell
0.1
If RachAdjSwitch in the CellAlgoSwitch MO is turned on and this parameter Read & Write is set to CFG, this parameter takes precedence over RachAdjSwitch.
Yes
Cell
0.1
The setting of this parameter takes effect only if PrachConfigIndexCf gInd is set to CFG. Read & Write Otherwise, the parameter setting does not take effect.
Yes
Cell
0.1
None
Read Only
N/A
N/A
N/A
None
Read & Write
Yes
Cell
0.1
None
Read & Write
Yes
Cell
0.1
None
Read & Write
Yes
Cell
0.1
None
Read & Write
Yes
Cell
0.1
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
Yes
Cell
0.1
None
Read & Write
Yes
Cell
0.1
None
Read Only
N/A
N/A
N/A
None
Read & Write
Yes
Cell
0.1
None
Read & Write
Yes
Cell
0.1
None
Read Only
N/A
N/A
N/A
Let A be the value of UlBandWidth in the Cell MO, B the even number that HoppingOffset in the PUSCHCFG MO is rounded up to, and C the difference between A and B. If UlHoppingType in the CellUlschAlgo MO is set to HOPPING_TYPE1, C must be greater Read & Write than UlBandWidth in the Cell MO modulo 2. If UlHoppingType in the CellUlschAlgo MO is set to HOPPING_TYPE2 or HOPPING_TYPE2_ RANDOM, C modulo Nsb in the PUSCHCfg MO must be greater than 0.
Yes
Cell
0.1
None
Read & Write
Yes
Cell
0.1
Let A be the value of UlBandWidth in the Cell MO, B the even number that HoppingOffset in the PUSCHCFG MO is rounded up to, and C the difference between A and B. If UlHoppingType in the CellUlschAlgo MO is set to HOPPING_TYPE1, C must be greater Read & Write than UlBandWidth in the Cell MO modulo 2. If UlHoppingType in the CellUlschAlgo MO is set to HOPPING_TYPE2 or HOPPING_TYPE2_ RANDOM, C modulo Nsb in the PUSCHCfg MO must be greater than 0.
Yes
Cell
0.1
None
Read & Write
Yes
Cell
0.1
None
Read & Write
N/A
N/A
None
Read & Write
Yes
Cell
0.1
None
Read & Write
N/A
N/A
None
Read & Write
Yes
Cell
0.1
None
Read Only
N/A
N/A
N/A
None
Read & Write
Yes
Cell
0.1
This parameter can be set only if PucchAlgoSwitch in the CellAlgoSwitch MO is turned off. Read & Write Otherwise, the parameter setting does not take effect.
Yes
Cell
0.1
This parameter can be set only if PucchAlgoSwitch in the CellAlgoSwitch MO is turned off. Read & Write Otherwise, the parameter setting does not take effect.
Yes
Cell
0.1
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
LOFD-001021: PS Inter-RAT Mobility between LTE and CDMA2000
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
In the Cdma2000HrpdNc ell MO, the value of LocalCellName is a string of a maximum of 99 characters. The string cannot be all null characters or contain any of the following characters:double quotation marks ("), Read & Write commas (,), semicolons (;), equal signs (=), single quotation marks ('), three consecutive plus signs (+++), two or more consecutive blanks, and two or more consecutive percentage signs (%). In the Cdma2000HrpdNc ell MO, the value of NeighbourCellNam e is a string of a maximum of 99 characters. The string cannot be all null characters or contain any of the following characters:double quotation marks ("), Read & Write commas (,), semicolons (;), equal signs (=), single quotation marks ('), three consecutive plus signs (+++), two or more consecutive blanks, and two or more consecutive percentage signs (%).
N/A
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
If SearchWindowSize CfgInd is set to Read & Write CFG, SearchWindowSize must be set.
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
In the Cdma2000External Cell MO, the value of CellName is a string of a maximum of 99 characters. The string cannot be all null characters or contain any of the following characters:double quotation marks ("), Read & Write commas (,), semicolons (;), equal signs (=), single quotation marks ('), three consecutive plus signs (+++), two or more consecutive blanks, and two or more consecutive percentage signs (%).
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
In the Cdma20001XRTTN cell MO, the value of LocalCellName is a string of a maximum of 99 characters. The string cannot be all null characters or contain any of the following characters:double quotation marks ("), Read & Write commas (,), semicolons (;), equal signs (=), single quotation marks ('), three consecutive plus signs (+++), two or more consecutive blanks, and two or more consecutive percentage signs (%). In the Cdma20001XRTTN cell MO, the value of NeighbourCellNam e is a string of a maximum of 99 characters. The string cannot be all null characters or contain any of the following characters:double Read & Write quotation marks ("), commas (,), semicolons (;), equal signs (=), single quotation marks ('), three consecutive plus signs (+++), two or more consecutive blanks, and two or more consecutive percentage signs (%).
N/A
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
The greater the parameter, the greater the possibility for the UE to camp in this cell. The smaller the Read & Write parameter is, the smaller the possibility for the UE to camp in this cell.
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
When RacCfgInd is set to CFG, Rac must be set. When RacCfgInd is Read & Write set to NOT_CFG, Rac does not need to be set.
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
In the GeranExternalCell MO, the value of CellName is a string of a maximum of 99 characters. The string cannot be all null characters or contain any of the following characters:double quotation marks ("), Read & Write commas (,), semicolons (;), equal signs (=), single quotation marks ('), three consecutive plus signs (+++), two or more consecutive blanks, and two or more consecutive percentage signs (%).
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
In the GeranNcell MO, the value of LocalCellName is a string of a maximum of 99 characters. The string cannot be all null characters or contain any of the following characters:double quotation marks ("), Read & Write commas (,), semicolons (;), equal signs (=), single quotation marks ('), three consecutive plus signs (+++), two or more consecutive blanks, and two or more consecutive percentage signs (%). In the GeranNcell MO, the value of NeighbourCellNam e is a string of a maximum of 99 characters. The string cannot be all null characters or contain any of the following characters:double quotation marks ("), Read & Write commas (,), semicolons (;), equal signs (=), single quotation marks ('), three consecutive plus signs (+++), two or more consecutive blanks, and two or more consecutive percentage signs (%).
N/A
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
If CellReselPriorityCfg Ind is set to CFG, Read & Write CellReselPriority must be set.
N/A
N/A
If PmaxGeranCfgInd is set to CFG, PmaxGeran must be set. Read & Write If PmaxGeranCfgInd is set to NOT_CFG, PmaxGeran does not need to be set.
N/A
N/A
If PmaxGeranCfgInd is set to CFG, PmaxGeran must be set. Read & Write If PmaxGeranCfgInd is set to NOT_CFG, PmaxGeran does not need to be set.
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
This parameter cannot be the same as the physical cell Read Only identity of the serving cell.
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
The smaller the value of this parameter, the less probable that the UE camps on the neighboring cell during reselection. Read & Write The larger the value of this parameter, the more probable that the UE camps on the neighboring cell.
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
In the EutranIntraFreqNC ell MO, the value of LocalCellName is a string of a maximum of 99 characters. The string cannot be all null characters or contain any of the following characters:double quotation marks ("), Read & Write commas (,), semicolons (;), equal signs (=), single quotation marks ('), three consecutive plus signs (+++), two or more consecutive blanks, and two or more consecutive percentage signs (%).
N/A
N/A
In the EutranIntraFreqNC ell MO, the value of NeighbourCellNam e is a string of a maximum of 99 characters. The string cannot be all null characters or contain any of the following characters: double quotation marks ("), Read & Write commas (,), semicolons (;), equal signs (=), single quotation marks ('), three consecutive plus signs (+++), two or more consecutive blanks, and two or more consecutive percentage signs (%).
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
If SpeedDependSPCf gInd is set to CFG, Read & Write TReselEutranSfMe dium must be set.
N/A
N/A
If SpeedDependSPCf gInd is set to CFG, Read & Write TReselEutranSfHig h must be set.
N/A
N/A
None
Read & Write
N/A
N/A
N/A
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
A larger value of this parameter leads to a lower probability of a cell meeting criteria S and becoming a suitable cell for cell selection. A smaller value of this Read & Write parameter leads to a higher probability. Set this parameter properly so that the selected cell can provide signals that meet the quality requirement of basic services.
N/A
N/A
None
Read & Write
N/A
N/A
If PmaxCfgInd is set to CFG, Pmax must Read & Write be set.
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
If QqualMinCfgInd is set to CFG, this parameter must be set. Read & Write If QqualMinCfgInd is set to NOT_CFG, this parameter does not need to be set.
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
The smaller the value of this parameter, the less probable that the UE camps on the neighboring cell during reselection. Read & Write The larger the value of this parameter, the more probable that the UE camps on the neighboring cell.
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
In the EutranInterFreqNC ell MO, the value of LocalCellName is a string of a maximum of 99 characters. The string cannot be all null characters or contain any of the following characters:double quotation marks ("), Read & Write commas (,), semicolons (;), equal signs (=), single quotation marks ('), three consecutive plus signs (+++), two or more consecutive blanks, and two or more consecutive percentage signs (%). In the EutranInterFreqNC ell MO, the value of NeighbourCellNam e is a string of a maximum of 99 characters. The string cannot be all null characters or contain any of the following characters:double quotation marks ("), Read & Write commas (,), semicolons (;), equal signs (=), single quotation marks ('), three consecutive plus signs (+++), two or more consecutive blanks, and two or more consecutive percentage signs (%).
N/A
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
In the EutranExternalCell MO, the value of CellName is a string of a maximum of 99 characters. The string cannot be all null characters or contain any of the following characters:double quotation marks ("), Read & Write commas (,), semicolons (;), equal signs (=), single quotation marks ('), three consecutive plus signs (+++), two or more consecutive blanks, and two or more consecutive percentage signs (%).
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
This parameter is optional, depending on the setting of Read & Write CellReselPriorityCfg Ind.
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
In the UtranNCell MO, the value of LocalCellName is a string of a maximum of 99 characters. The string cannot be all null characters or contain any of the following characters:double quotation marks ("), Read & Write commas (,), semicolons (;), equal signs (=), single quotation marks ('), three consecutive plus signs (+++), two or more consecutive blanks, and two or more consecutive percentage signs (%). In the UtranNCell MO, the value of NeighbourCellNam e is a string of a maximum of 99 characters. The string cannot be all null characters or contain any of the following characters:double quotation marks ("), Read & Write commas (,), semicolons (;), equal signs (=), single quotation marks ('), three consecutive plus signs (+++), two or more consecutive blanks, and two or more consecutive percentage signs (%).
N/A
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
This parameter is optional, depending on the setting of Read & Write CellReselPriorityCfg Ind.
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
1. If UtranUlArfcnCfgInd is set to CFG, UtranUlArfcn must be set. Read & Write 2. The DL UARFCN and UL UARFCN must be in the same frequency band.
N/A
N/A
None
Read & Write
N/A
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
Qqualmin must be set if UtranFddTddType is set to UTRAN_FDD.
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
ThreshXHighQ must be set if UtranFddTddType is set to UTRAN_FDD.
Read & Write
N/A
N/A
ThreshXLowQ must be set if UtranFddTddType Read & Write is set to UTRAN_FDD.
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
When UtranUlArfcnCfgInd is set to CFG, UtranUlArfcn must be set. If Read & Write UtranUlArfcnCfgInd is set to NOT_CFG, UtranUlArfcn does not need to be configured.
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
If RacCfgInd is set to CFG, this parameter must be set.
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
In the UtranExternalCell MO, the value of CellName is a string of a maximum of 99 characters. The string cannot be all null characters or contain any of the following characters:double quotation marks ("), Read & Write commas (,), semicolons (;), equal signs (=), single quotation marks ('), three consecutive plus signs (+++), two or more consecutive blanks, and two or more consecutive percentage signs (%).
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
Cells configured with punctured RBs and non-standard bandwidths support only static ICIC. If Read & Write adaptive DL ICIC is enabled, static and dynamic DL ICIC do not take effect.
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
If adaptive UL ICIC is enabled, static and dynamic UL Read & Write ICIC do not take effect.
N/A
N/A
None
Read & Write
Yes
Cell
0.1
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
RTHD in the LICENSEALMTHD MO must be smaller Read & Write than or equal to OTHD.
N/A
N/A
None
Read & Write
N/A
N/A
RTHD in the LICENSEALMTHD MO must be smaller Read & Write than or equal to OTHD.
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
The total traffic proportions of all operations cannot exceed 100%.
Read & Write
N/A
N/A
Read & Write
N/A
N/A
Read & Write
N/A
N/A
Read & Write
N/A
N/A
The value of this parameter cannot Read & Write exceed that of Operator1TrfRatio.
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
Yes
Cell
0.1
None
Read & Write
No (And no impact on the UE in idle mode) No (And no impact on the UE in idle mode) No (And no impact on the UE in idle mode) No (And no impact on the UE in idle mode) No (And no impact on the UE in idle mode)
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
No (And no impact on the UE in idle mode) No (And no impact on the UE in idle mode) No (And no impact on the UE in idle mode) No (And no impact on the UE in idle mode) No (And no impact on the UE in idle mode) No (And no impact on the UE in idle mode) No (And no impact on the UE in idle mode) No (And no impact on the UE in idle mode) No (And no impact on the UE in idle mode) No (And no impact on the UE in idle mode) No (And no impact on the UE in idle mode) No (And no impact on the UE in idle mode) No (And no impact on the UE in idle mode)
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
OBJTORSCGROU PID in an NODETORSCGRP MO must be Read Only different from that in any other NODETORSCGRP MO.
N/A
N/A
N/A
None
Read & Write
Yes
NE
Less than one minute
None
Read & Write
Yes
NE
In a NODETORSCGRP MO, ENDPOINTID is valid only when ISALLMATCH is set to NO. In a NODETORSCGRP MO, if S1X2FLAG is set to SGW, ENDPOINTID must Read & Write be set to a value in the range of 0 to 127. In a NODETORSCGRP MO, if S1X2FLAG is set to X2eNodeB, ENDPOINTID must be set to a value in the range of 16 to 79.
Yes
NE
None
Read & Write
Yes
NE
None
Read & Write
Yes
NE
None
Read & Write
Yes
NE
None
Read & Write
Yes
NE
None
Read & Write
Yes
NE
None
Read & Write
Yes
NE
None
Read & Write
Yes
NE
None
Read & Write
Yes
NE
SONSECPARANA ME in an SonSecPara MO Read Only must be different from that in any other SonSecPara MO.
N/A
N/A
N/A
None
Read & Write
N/A
N/A
N/A
None
Read & Write
N/A
N/A
N/A
None
Read & Write
N/A
N/A
N/A
None
Read & Write
N/A
N/A
N/A
In an SonSecPara MO, this parameter is valid only when Read & Write IKEVERSION is set to IKE_V1.
N/A
N/A
N/A
None
Read & Write
N/A
N/A
N/A
None
Read & Write
N/A
N/A
N/A
In an SonSecPara MO, this parameter is valid only when Read & Write DPD is set to PERIODIC.
N/A
N/A
N/A
None
Read & Write
N/A
N/A
N/A
In an SonSecPara MO, this parameter is valid only when Read & Write DPD is set to PERIODIC.
N/A
N/A
N/A
None
Read & Write
N/A
N/A
N/A
None
Read & Write
N/A
N/A
N/A
In an SonSecPara MO, this parameter is valid only when Read & Write LTCFG is set to LOCAL.
N/A
N/A
N/A
In an SonSecPara MO, this parameter is valid only when Read & Write LTCFG is set to LOCAL. CNOPERATORID in an SonSecPara MO must be the same as CnOperatorId in a configured CnOperator MO.
N/A
N/A
N/A
Read & Write
N/A
N/A
N/A
MMEID in an MME6 MO must be different from that in Read Only any other MME6 MO.
N/A
N/A
N/A
FIRSTSIGIP in an MME MO must be different from IP in any DEVIP MO, and cannot be set to 0.0.0.0. FIRSTSIGIP in each MME MO must be different Read & Write from FIRSTSIGIP or SECSIGIP in any other MME MO. FIRSTSIGIP in each MME MO must be different from FIRSTSIGIP or SECSIGIP in any X2eNodeB MO.
Yes
NE
Less than 1 minute
None
Read & Write
Yes
NE
Less than 1 minute
FIRSTIKEPEERNM and FIRSTIPSECPROP NM are valid only when FIRSTIPSECFLAG is set to ENABLE. If Read & Write FIRSTIPSECFLAG in the MME MO is set to ENABLE, FIRSTIKEPEERNM must be the same as PEERNAME in a configured IKEPEER MO.
Yes
NE
Less than 1 minute
FIRSTIKEPEERNM and FIRSTIPSECPROP NM are valid only when the FIRSTIPSECFLAG parameter is set to ENABLE. If FIRSTIPSECFLAG Read & Write in the MME MO is set to ENABLE, FIRSTIPSECPROP NM must be the same as PROPNAME in a configured IPSECPROPOSAL MO. SECSIGIP in an MME MO is valid if it is not set to 0.0.0.0. This enables the MME to set up an SCTP link based on SCTP multi-homing with the local eNodeB. If SECSIGIP in an MME MO is set to a valid value, it must be different from IP in any DEVIP MO configured on the local eNodeB. If SECSIGIP in an Read & Write MME MO is set to a valid value, it must be different from FIRSTSIGIP in the same MO. If SECSIGIP in an MME MO is set to a valid value, it must be different from FIRSTSIGIP or SECSIGIP in any configured MME MO. If SECSIGIP in an MME MO is set to a valid value, it must be different from
Yes
NE
Less than 1 minute
Yes
NE
Less than 1 minute
None
Read & Write
Yes
NE
Less than 1 minute
SECIKEPEERNM and SECIPSECPROPN M are valid only when SECIKEPEERNM is set to ENABLE. If SECIPSECFLAG Read & Write in the MME MO is set to ENABLE, SECIKEPEERNM must be the same as PEERNAME in a configured IKEPEER MO. SECIKEPEERNM and SECIPSECPROPN M are valid only when the SECIKEPEERNM parameter is set to ENABLE. If SECIPSECFLAG Read & Write in the MME MO is set to ENABLE, SECIPSECPROPN M must be the same as PROPNAME in a configured IPSECPROPOSAL MO.
Yes
NE
Less than 1 minute
Yes
NE
Less than 1 minute
None
Read & Write
Yes
NE
Less than 1 minute
None
Read & Write
N/A
N/A
CNOPERATORID in an MME MO must be the same Read & Write as CnOperatorId in a configured CnOperator MO.
Yes
NE
Less than 1 minute
None
Read & Write
Yes
NE
MMEID in an MME MO must be Read Only different from that in any other MME MO.
N/A
N/A
N/A
FIRSTSIGIP in an MME MO must be different from IP in any configured DEVIP MO, and cannot be set to 0.0.0.0. FIRSTSIGIP in an MME MO must be different from FIRSTSIGIP and SECSIGIP in any other MME MO. FIRSTSIGIP in an MME MO must be different from FIRSTSIGIP and SECSIGIP in any X2eNodeB MO.
Read & Write
Yes
NE
None
Read & Write
Yes
NE
In an MME MO, FIRSTIPSECPROP NM and FIRSTIKEPEERNM are valid only when FIRSTIPSECFLAG is set to ENABLE. If FIRSTIPSECFLAG Read & Write in an MME MO is set to ENABLE, FIRSTIKEPEERNM in this MO must be the same as PEERNAME in a configured IKEPEER MO.
Yes
NE
In an MME MO, FIRSTIPSECPROP NM and FIRSTIKEPEERNM are valid only when FIRSTIPSECFLAG is set to ENABLE. If FIRSTIPSECFLAG Read & Write in an MME MO is set to ENABLE, FIRSTIPSECPROP NM in this MO must be the same as PROPNAME in a configured IPSECPROPOSAL MO. If SECSIGIP in an MME MO is valid, that is, it is not set to 0.0.0.0, an SCTP link between the eNodeB and the MME can be set up using SCTP multihoming. If SECSIGIP in an MME MO is valid, it must be different from IP in any configured DEVIP MO. If SECSIGIP in an Read & Write MME MO is valid, it must be different from FIRSTSIGIP in the same MO. If SECSIGIP in an MME MO is valid, it must be different from FIRSTSIGIP or SECSIGIP in any other MME MO. If SECSIGIP in an MME MO is valid, it must be different from FIRSTSIGIP or SECSIGIP in any X2eNodeB MO.
Yes
NE
Yes
NE
None
Read & Write
Yes
NE
In an MME MO, SECIPSECPROPN M and SECIKEPEERNM are valid only when SECIPSECFLAG is set to ENABLE. If SECIPSECFLAG Read & Write in an MME MO is set to ENABLE, SECIKEPEERNM in this MO must be the same as PEERNAME in a configured IKEPEER MO. In an MME MO, SECIPSECPROPN M and SECIKEPEERNM are valid only when SECIPSECFLAG is set to ENABLE. If SECIPSECFLAG Read & Write in an MME MO is set to ENABLE, SECIPSECPROPN M in this MO must be the same as PROPNAME in a configured IPSECPROPOSAL MO.
Yes
NE
Yes
NE
None
Read & Write
Yes
NE
None
Read & Write
Yes
NE
CNOPERATORID in an MME MO must be the same Read & Write as CnOperatorId in a configured CnOperator MO.
Yes
NE
None
Read & Write
Yes
NE
None
Read & Write
Yes
NE
None
Read & Write
Yes
NE
None
Read & Write
Yes
NE
S1SERVIPID in an S1ServIP MO must Read Only be different from that in any other S1ServIP MO. S1SERVIP in any S1ServIP MO cannot be set to 0.0.0.0. S1SERVIP in an S1ServIP MO must be the same as IP in a configured DEVIP MO. CN, SRN, and SN in an S1ServIP MO must be the same as those, respectively, in the DEVIP MO associated with the S1SERVIP Read & Write parameter. If S1SERVIP in an S1ServIP MO is on a different network segment from SERVIP1, SERVIP2, SERVIP3, or SERVIP4 in an SGW MO and this service IP address in the SGW MO is set to a valid IP address (that is, not 0.0.0.0), a route to SERVIP1, SERVIP2,
N/A
N/A
N/A
N/A
N/A
N/A
None
Read & Write
Yes
NE
In an S1ServIP MO, this parameter is valid only when IPSECFLAG is set to ENABLE. If IKEIP in an S1ServIP MO is valid, it must be the same as IP in a configured DEVIP MO with PT set to ETH or ETHTRK. If IKEIP in an S1ServIP MO is valid, CN, SRN, and SN in the same MO must be the same Read & Write as those, respectively, in the DEVIP MO associated with this IKEIP. If IKEIP in an S1ServIP MO is valid and PT in the DEVIP MO associated with the S1SERVIP parameter is not set to LOOPINT, PN in the DEVIP MO associated with IKEIP must be the same as PN in the
Yes
NE
None
Read & Write
Yes
NE
CNOPERATORID in an S1ServIP MO must be the same Read & Write as CnOperatorId in a configured CnOperator MO. S1ServIP6ID in an S1ServIP6 MO must be different from that in any other S1ServIP6 MO.
Yes
eNodeB
Less than 1 minute
Read Only
N/A
N/A
N/A
None
Read & Write
Yes
NE
Less than 1 minute
None
Read & Write
Yes
NE
Less than 1 minute
None
Read & Write
Yes
NE
Less than 1 minute
S1SERVIP in the S1ServIP MO cannot be set to 0.0.0.0. S1SERVIP in an S1ServIP MO must be the same asIP in a configured DEVIP MO. CN, SRN, and SN in an S1ServIP MO must be the same as those in the DEVIP MO associated with S1SERVIP. If SERVIP1, Read & Write SERVIP2, SERVIP3, or SERVIP4 in an SGW MO is set to a valid IP address (not 0.0.0.0) on a different network segment from S1SERVIP in an S1ServIP MO, a route to SERVIP1, SERVIP2, SERVIP3, or SERVIP4 must have been configured.
Yes
BS
Less than 1 minute
None
Read & Write
Yes
NE
Less than 1 minute
This parameter is valid only when IPSECFLAG in the S1ServIP MO is set to ENABLE. This parameter, if valid, cannot be set to 0.0.0.0. It must be the same as IP in a DEVIP MO configured on the local eNodeB, which has PT set to ETH or ETHTRK. If this parameter is valid, CN, SRN, and SN in the S1ServIP Read & Write MO must be the same as those in the DEVIP MO associated with this parameter. If this parameter is valid and PT in the DEVIP MO associated with S1SERVIP is not set to LOOPINT, PN in the DEVIP MO associated with this parameter must be set to the same value as that in the S1ServIP MO.
Yes
NE
Less than 1 minute
None
Read & Write
Yes
NE
Less than 1 minute
The CNOPERATORID parameter in the X2eNodeB MO must be set to the same value as the CnOperatorId parameter in an existing CnOperator MO.
Read & Write
Yes
BS
Less than 1 minute
None
Read & Write
Yes
NE
None
Read & Write
Yes
NE
None
Read & Write
Yes
NE
S1SIGIPID in an S1SigIP MO must be different from that in any other S1SigIP MO.
Read Only
N/A
N/A
N/A
LOCIP in an S1SigIP MO cannot be set to 0.0.0.0 and must be the same as IP in a configured DEVIP MO. CN, SRN, and SN Read & Write in an S1SigIP MO must be the same as those, respectively, in the DEVIP MO associated with LOCIP.
Yes
NE
None
Read & Write
Yes
NE
In an S1SigIP MO, this parameter is valid only when LOCIPSECFLAG is set to ENABLE. If IKEIP in an S1SigIP MO is valid, it must be the same as IP in a configured DEVIP MO with PT set to ETH or ETHTRK. If IKEIP in an S1SigIP MO is valid, CN, SRN, and SN in the same MO must be the same Read & Write as those, respectively, in the DEVIP MO associated with this IKEIP. If IKEIP in an S1SigIP MO is valid and PT in the DEVIP MO associated with LOCIP is not set to LOOPINT, PN in the DEVIP MO associated with this IKEIP must be the same as PN in the DEVIP MO In an S1SigIP MO, SECLOCIP must be different from LOCIP. SECLOCIP in an S1SigIP MO must be the same as IP in a configured DEVIP MO. Read & Write CN, SRN, and SN in an S1SigIP MO must be the same as those, respectively, in the DEVIP MO associated with SECLOCIP in the S1SigIP MO.
Yes
NE
Yes
NE
None
Read & Write
Yes
NE
In an S1SigIP MO, this parameter is valid only when SECLOCIPSECFL AG is set to ENABLE. If SECLOCIKEIP in an S1SigIP MO is valid, must be the same as IP in a configured DEVIP MO with PT set to ETH or ETHTRK. If SECLOCIKEIP in an S1SigIP MO is valid, CN, SRN, and SN in the same MO Read & Write must be the same as those, respectively, in the DEVIP MO associated with this SECLOCIKEIP. If SECLOCIKEIP in an S1SigIP MO is valid and PT in the DEVIP MO associated with SECLOCIP is not set to LOOPINT, PN in the DEVIP MO associated with this SECLOCIKEIP must be the same
Yes
NE
None
Read & Write
Yes
NE
None
Read & Write
Yes
NE
None
Read & Write
Yes
NE
None
Read & Write
Yes
NE
None
Read & Write
Yes
NE
None
Read & Write
Yes
NE
None
Read & Write
Yes
NE
The value of the MAXASSOCRETR parameter must be greater than that of Read & Write the MAXPATHRETR parameter.
Yes
NE
MaxPathRetr must be less than MaxAssocRetr.
Read & Write
Yes
NE
None
Read & Write
Yes
NE
None
Read & Write
Yes
NE
None
Read & Write
Yes
NE
None
Read & Write
Yes
NE
In an S1SigIP MO, this parameter is valid only when Read & Write SWITCHBACKFLA G is set to ENABLE.
Yes
NE
None
Read & Write
Yes
NE
CNOPERATORID in an S1SigIP MO must be the same as CnOperatorId in a configured Read & Write CnOperator MO. CNOPERATORID in each S1SigIP MO must have a unique value. S1SIGIP6ID in an S1SigIP6 MO must Read Only be different from that in any other S1SigIP6 MO.
Yes
eNodeB
Less than 1 minute
N/A
N/A
N/A
None
Read & Write
Yes
NE
Less than 1 minute
None
Read & Write
Yes
NE
Less than 1 minute
None
Read & Write
Yes
NE
Less than 1 minute
This parameter in an S1SigIP MO cannot be set to 0.0.0.0 and must be the same as IP in a configured DEVIP MO. Read & Write CN, SRN, and SN in an S1SigIP MO must be the same as those in the DEVIP MO associated with LOCIP.
Yes
NE
None
Read & Write
Yes
NE
Less than 1 minute
This parameter is valid only when LOCIPSECFLAG in the S1SigIP MO is set to ENABLE. This parameter, if valid, cannot be set to 0.0.0.0. It must be the same as IP in a DEVIP MO configured on the local eNodeB. PT in the DEVIP MO must be set to ETH or ETHTRK. If this parameter is valid, CN, SRN, and Read & Write SN in the S1SigIP MO must be the same as those in the DEVIP MO associated with this parameter. If this parameter is valid and PT in the DEVIP MO associated with LOCIP is not set to LOOPINT, PN in the DEVIP MO associated with IKEIP must be the same as that in the DEVIP associated In an S1SigIP MO, SECLOCIP must be different from LOCIP. SECLOCIP in an S1SigIP MO must be the same as IP in a configured Read & Write DEVIP MO. CN, SRN, and SN in an S1SigIP MO must be the same as those in the DEVIP MO associated with SECLOCIP.
Yes
NE
Less than 1 minute
Yes
NE
Less than 1 minute
None
Read & Write
Yes
NE
Less than 1 minute
This parameter is valid only when SECIPSECFLAG in the S1SigIP MO is set to ENABLE. This parameter, if not set to 0.0.0.0, must be the same as IP in a configured DEVIP MO with PT set to ETH or ETHTRK. If this parameter is valid, CN, SRN, and SN in the S1SigIP MO must be the same as those in Read & Write the DEVIP MO associated with this parameter. If this parameter is valid and PT in the DEVIP MO associated with SECLOCIP is not set to LOOPINT, PN in the DEVIP MO associated with SECLOCIKEIP must be the same as that in the DEVIP associated with SECLOCIP.
Yes
NE
Less than 1 minute
None
Read & Write
Yes
NE
Less than 1 minute
None
Read & Write
Yes
NE
Less than 1 minute
None
Read & Write
Yes
NE
Less than 1 minute
None
Read & Write
Yes
NE
Less than 1 minute
None
Read & Write
Yes
NE
Less than 1 minute
None
Read & Write
Yes
NE
Less than 1 minute
None
Read & Write
Yes
NE
Less than 1 minute
MaxAssocRetr must be greater than Read & Write MaxPathRetr.
Yes
NE
Less than 1 minute
MaxPathRetr must be less than MaxAssocRetr.
Read & Write
Yes
NE
Less than 1 minute
None
Read & Write
Yes
NE
Less than 1 minute
None
Read & Write
Yes
NE
Less than 1 minute
None
Read & Write
Yes
NE
Less than 1 minute
None
Read & Write
Yes
NE
Less than 1 minute
This parameter is valid only when SWITCHBACKFLA Read & Write G in the S1SigIP MO is set to ENABLE.
Yes
NE
Less than 1 minute
Read & Write
Yes
NE
SGWID in an SGW MO must be Read Only different from that in any other SGW MO.
N/A
N/A
N/A
SERVIP1 in an SGW MO cannot be set to 0.0.0.0, and must be different from IP in any configured DEVIP MO. In an SGW MO, SERVIP1 must be different from SERVIP2, Read & Write SERVIP3, and SERVIP4. SERVIP1 in an SGW MO must be different from SERVIP1, SERVIP2, SERVIP3, and SERVIP4 in any other SGW MO.
Yes
NE
None
Read & Write
Yes
NE
In an SGW MO, SERVIP1IKEPPER NM and SERVIP1IPSECPR OPNM are valid only when SERVIP1IPSECFL AG is set to ENABLE. Read & Write If SERVIP1IPSECFL AG in an SGW MO is set to ENABLE, SERVIP1IKEPPER NM in this MO must be the same as PEERNAME in a configured IKEPEER MO.
Yes
NE
In an SGW MO, SERVIP1IKEPPER NM and SERVIP1IPSECPR OPNM are valid only when SERVIP1IPSECFL AG is set to ENABLE. If Read & Write SERVIP1IPSECFL AG in an SGW MO is set to ENABLE, SERVIP1IPSECPR OPNM in this MO must be the same as PROPNAME in a configured IPSECPROPOSAL MO. SERVIP2 in an SGW MO cannot be set to 0.0.0.0, and must be different from IP in any configured DEVIP MO. In an SGW MO, SERVIP2 must be different from SERVIP1, Read & Write SERVIP3, and SERVIP4. SERVIP2 in an SGW MO must be different from SERVIP1, SERVIP2, SERVIP3, and SERVIP4 in any other SGW MO.
Yes
NE
Yes
NE
None
Read & Write
Yes
NE
In an SGW MO, SERVIP2IKEPPER NM and SERVIP2IPSECPR OPNM are valid only when SERVIP2IPSECFL AG is set to ENABLE. Read & Write If SERVIP2IPSECFL AG in an SGW MO is set to ENABLE, SERVIP2IKEPPER NM in this MO must be the same as PEERNAME in a configured IKEPEER MO. In an SGW MO, SERVIP2IKEPPER NM and SERVIP2IPSECPR OPNM are valid only when SERVIP2IPSECFL AG is set to ENABLE. If Read & Write SERVIP2IPSECFL AG in an SGW MO is set to ENABLE, SERVIP2IPSECPR OPNM in this MO must be the same as PROPNAME in a configured IPSECPROPOSAL MO.
Yes
NE
Yes
NE
SERVIP3 in an SGW MO cannot be set to 0.0.0.0, and must be different from IP in any configured DEVIP MO. In an SGW MO, SERVIP3 must be different from SERVIP1, Read & Write SERVIP2, and SERVIP4. SERVIP3 in an SGW MO must be different from SERVIP1, SERVIP2, SERVIP3, and SERVIP4 in any other SGW MO.
Yes
NE
None
Read & Write
Yes
NE
In an MME MO, SERVIP3IKEPPER NM and SERVIP3IPSECPR OPNM are valid only when SERVIP3IPSECFL AG is set to ENABLE. Read & Write If SERVIP3IPSECFL AG in an SGW MO is set to ENABLE, SERVIP3IKEPPER NM in this MO must be the same as PEERNAME in a configured IKEPEER MO.
Yes
NE
In an SGW MO, SERVIP3IKEPPER NM and SERVIP3IPSECPR OPNM are valid only when SERVIP3IPSECFL AG is set to ENABLE. If Read & Write SERVIP3IPSECFL AG in an SGW MO is set to ENABLE, SERVIP3IPSECPR OPNM in this MO must be the same as PROPNAME in a configured IPSECPROPOSAL MO. SERVIP4 in an SGW MO cannot be set to 0.0.0.0, and must be different from IP in any configured DEVIP MO. In an SGW MO, SERVIP4 must be different from SERVIP1, Read & Write SERVIP2, and SERVIP3. SERVIP4 in an SGW MO must be different from SERVIP1, SERVIP2, SERVIP3, and SERVIP4 in any other SGW MO.
Yes
NE
Yes
NE
None
Read & Write
Yes
NE
In an SGW MO, SERVIP4IKEPPER NM and SERVIP4IPSECPR OPNM are valid only when SERVIP4IPSECFL AG is set to ENABLE. Read & Write If SERVIP4IPSECFL AG in an SGW MO is set to ENABLE, SERVIP4IKEPPER NM in this MO must be the same as PEERNAME in a configured IKEPEER MO. In an SGW MO, SERVIP4IKEPPER NM and SERVIP4IPSECPR OPNM are valid only when SERVIP4IPSECFL AG is set to ENABLE. If Read & Write SERVIP4IPSECFL AG in an SGW MO is set to ENABLE, SERVIP4IPSECPR OPNM in this MO must be the same as PROPNAME in a configured IPSECPROPOSAL MO.
Yes
NE
Yes
NE
None
Read & Write
Yes
NE
CNOPERATORID in an SGW MO must be the same Read & Write as CnOperatorId in a configured CnOperator MO.
Yes
NE
SGWID in an SGW6 MO must be different from that in Read Only any other SGW6 MO. SERVIP1 in the SGW MO cannot be set to 0.0.0.0, and must be different from IP in any configured DEVIP MO. SERVIP1 must be set to a different value from those of SERVIP2, SERVIP3, and Read & Write SERVIP4 in the same SGW MO. SERVIP1 must be set to a different value from those of SERVIP1, SERVIP2, SERVIP3, and SERVIP4 in any configured SGW MO.
N/A
N/A
N/A
Yes
NE
Less than 1 minute
None
Read & Write
Yes
NE
Less than 1 minute
SERVIP1IKEPPER NM and SERVIP1IPSECPR OPNM are valid only when SERVIP1IPSECFL AG is set to ENABLE. If Read & Write SERVIP1IPSECFL AG in the SGW MO is set to ENABLE, SERVIP1IKEPPER NM must be the same as PEERNAME in a configured IKEPEER MO. SERVIP1IKEPPER NM and SERVIP1IPSECPR OPNM are valid only when SERVIP1IPSECFL AG is set to ENABLE. If SERVIP1IPSECFL Read & Write AG in the SGW MO is set to ENABLE, SERVIP1IPSECPR OPNM must be the same as PROPNAME in a configured IPSECPROPOSAL MO.
Yes
NE
Yes
NE
SERVIP2 in the SGW MO cannot be set to 0.0.0.0, and must be different from IP in any configured DEVIP MO. SERVIP2 must be set to a different value from those of SERVIP1, SERVIP3, and Read & Write SERVIP4 in the same SGW MO. SERVIP1 must be set to a different value from those of SERVIP1, SERVIP2, SERVIP3, and SERVIP4 in any configured SGW MO.
Yes
NE
Less than 1 minute
None
Read & Write
Yes
NE
Less than 1 minute
Yes
NE
Less than 1 minute
Yes
NE
Yes
NE
Less than 1 minute
None
Read & Write
Yes
NE
Less than 1 minute
Yes
NE
Less than 1 minute
Yes
NE
Yes
NE
Less than 1 minute
None
Read & Write
Yes
NE
Less than 1 minute
SERVIP4IKEPPER NM and SERVIP4IPSECPR OPNM are valid only when SERVIP4IPSECFL AG is set to ENABLE. If Read & Write SERVIP4IKEPPER NM in the SGW MO is set to ENABLE, SERVIP4IKEPPER NM must be the same as PEERNAME in a configured IKEPEER MO. SERVIP4IKEPPER NM and SERVIP4IPSECPR OPNM are valid only when SERVIP4IPSECFL AG is set to ENABLE. If SERVIP4IKEPPER Read & Write NM in the SGW MO is set to ENABLE, SERVIP4IPSECPR OPNM must be the same as PROPNAME in a configured IPSECPROPOSAL MO.
Yes
NE
Less than 1 minute
Yes
NE
None
Read & Write
Yes
NE
CNOPERATORID in an SGW MO must be the same Read & Write as CnOperatorId in a configured CnOperator MO.
Yes
NE
Less than 1 minute
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
X2SERVIPID in an X2ServIP MO must Read Only be different from that in any other X2ServIP MO. X2SERVIP in any X2ServIP MO cannot be set to 0.0.0.0. CN, SRN, and SN in an X2ServIP MO must be the same as those, respectively, in the DEVIP MO associated with X2SERVIP. X2SERVIP in an X2ServIP MO must be the same as IP in a configured DEVIP MO. Read & Write If X2SERVIP in an X2ServIP MO is on a different network segment from SERVIP1, SERVIP2, SERVIP3, or SERVIP4 in an X2eNodeB MO and this service IP address in the X2eNodeB MO is set to a valid IP address (that is, not 0.0.0.0), a route to SERVIP1, SERVIP2,
N/A
N/A
N/A
N/A
N/A
N/A
None
Read & Write
N/A
N/A
In an X2ServIP MO, this parameter is valid only when Read & Write IPSECFLAG is set to ENABLE.
N/A
N/A
In an X2ServIP MO, this parameter is valid only when IPSECFLAG is set to ENABLE. If IKEIP in an X2ServIP MO is valid, it cannot be set to 0.0.0.0 and must be the same as IP in a configured DEVIP MO with PT set to ETH or ETHTRK. If IKEIP in an X2ServIP MO is valid, CN, SRN, and Read & Write SN in the same MO must be the same as those, respectively, in the DEVIP MO associated with this IKEIP. If IKEIP in an X2ServIP MO is valid and PT in the DEVIP MO associated with the S1SERVIP parameter is not set to LOOPINT, PN in the DEVIP MO associated with In an X2ServIP MO, IKEPEERNM and IPSECPROPNM are valid only when IPSECFLAG and SEGWFLAG are both set to Read & Write ENABLE. IKEPEERNM, if valid, must be the same as PEERNAME in a configured IKEPEER MO.
N/A
N/A
N/A
N/A
In an X2ServIP MO, IKEPEERNM and IPSECPROPNM are valid only when IPSECFLAG and SEGWFLAG are both set to ENABLE. Read & Write If this parameter in an X2ServIP MO is valid, it must be the same as PROPNAME in a configured IPSECPROPOSAL MO.
N/A
N/A
None
Read & Write
N/A
N/A
CNOPERATORID in an X2ServIP MO must be the same Read & Write as CnOperatorId in a configured CnOperator MO.
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
X2SIGIPID in an X2SigIP MO must be different from that in any other X2SigIP MO.
Read Only
N/A
N/A
N/A
LOCIP in an X2SigIP MO cannot be set to 0.0.0.0 and must be the same as IP in a configured DEVIP MO. CN, SRN, and SN Read & Write in an X2SigIP MO must be the same as those, respectively, in the DEVIP MO associated with LOCIP.
N/A
N/A
N/A
None
Read & Write
N/A
N/A
In an X2SigIP MO, this parameter is valid only when Read & Write IPSECFLAG is set to ENABLE.
N/A
N/A
In an X2SigIP MO, this parameter is valid only when IPSECFLAG is set to ENABLE. If IKEIP in an X2SigIP MO is valid, it cannot be set to 0.0.0.0 and must be the same as IP in a configured DEVIP MO with PT set to ETH or ETHTRK. If IKEIP in an X2SigIP MO is valid, CN, SRN, and Read & Write SN in the same MO must be the same as those, respectively, in the DEVIP MO associated with this IKEIP. If IKEIP in an X2SigIP MO is valid and PT in the DEVIP MO associated with LOCIP is not set to LOOPINT, PN in the DEVIP MO associated with this IKEIP must be the
N/A
N/A
In an X2SigIP MO, IKEPEERNM and IPSECPROPNM are valid only when IPSECFLAG and SEGWFLAG are both set to Read & Write ENABLE. IKEPEERNM, if valid, must be the same as PEERNAME in a configured IKEPEER MO. In an X2SigIP MO, IKEPEERNM and IPSECPROPNM are valid only when IPSECFLAG and SEGWFLAG are both set to ENABLE. Read & Write If this parameter in an X2SigIP MO is valid, it must be the same as PROPNAME in a configured IPSECPROPOSAL MO.
N/A
N/A
N/A
N/A
If SECLOCIP in an X2SigIP MO is valid, that is, it is not set to 0.0.0.0, an SCTP link between the neighboring eNodeB and the local eNodeB can be set up using SCTP multihoming. This parameter, if valid, must be the same as IP in a Read & Write configured DEVIP MO. If SECLOCIP in an X2SigIP MO is valid, CN, SRN, and SN in the same MO must be the same as those, respectively, in the DEVIP MO associated with this SECLOCIP.
N/A
N/A
None
Read & Write
N/A
N/A
In an X2SigIP MO, this parameter is valid only when Read & Write SECIPSECFLAG is set to ENABLE.
N/A
N/A
In an X2SigIP MO, this parameter is valid only when SECLOCIPSECFL AG is set to ENABLE. If SECLOCIKEIP in an X2SigIP MO is valid, it cannot be set to 0.0.0.0 and must be the same as IP in a configured DEVIP MO with PT set to ETH or ETHTRK. If SECLOCIKEIP in an X2SigIP MO is Read & Write valid, CN, SRN, and SN in the same MO must be the same as those, respectively, in the DEVIP MO associated with this IKEIP. If SECLOCIKEIP in an X2SigIP MO is valid and PT in the DEVIP MO associated with SECLOCIP is not set to LOOPINT, PN in the DEVIP MO associated with
N/A
N/A
In an X2SigIP MO, SECIKEPEERNM and SECIPSECPROPN M are valid only when SECIPSECFLAG and Read & Write SECSEGWFLAG are both set to ENABLE. SECIKEPEERNM, if valid, must be the same as PEERNAME in a configured IKEPEER MO. In an X2SigIP MO, SECIKEPEERNM and SECIPSECPROPN M are valid only when SECIPSECFLAG and SECSEGWFLAG Read & Write are both set to ENABLE. If this parameter in an X2SigIP MO is valid, it must be the same as PROPNAME in a configured IPSECPROPOSAL MO.
N/A
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
In an X2SigIP MO, RTOMAX must be Read & Write greater than RTOMIN.
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
N/A
N/A
In an X2SigIP MO, MaxPathRetr must Read & Write be smaller than MaxAssocRetr.
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
SWITCHBACKHBN UM is valid only when Read & Write SWITCHBACKFLA G is set to ENABLE.
N/A
N/A
N/A
N/A
None
Read & Write
N/A
N/A
CNOPERATORID in an X2SigIP MO must be the same as CnOperatorId in a configured Read & Write CnOperator MO. CNOPERATORID in each X2SigIP MO must have a unique value. X2ENODEBID in an X2eNodeB MO must be different Read Only from that in any other X2eNodeB MO. FIRSTSIGIP in an X2eNodeB MO cannot be set to 0.0.0.0 and must be a valid IP address that is different from IP in any configured DEVIP MO. FIRSTSIGIP in an X2eNodeB MO must be different Read & Write from FIRSTSIGIP and SECSIGIP in any other X2eNodeB MO. FIRSTSIGIP in an X2eNodeB MO must be different from FIRSTSIGIP and SECSIGIP in any configured MME MO.
Yes
eNodeB
Less than 1 minute
N/A
N/A
N/A
N/A
N/A
None
Read & Write
N/A
N/A
In an X2eNodeB MO, this parameter is valid only when Read & Write FIRSTSEGWFLAG is set to ENABLE.
N/A
N/A
In an X2eNodeB MO, FIRSTIKEIP is valid only when FIRSTIPSECFLAG is set to ENABLE and FIRSTSEGWFLAG Read & Write is set to DISABLE. This parameter, if valid, cannot be set to 0.0.0.0 or IP in any configured DEVIP MO.
N/A
N/A
If SECSIGIP in an X2eNodeB MO is valid, that is, it is not set to 0.0.0.0, an SCTP link between the neighboring eNodeB and the local eNodeB can be set up using SCTP multihoming. If SECLOCIP in an X2eNodeB MO is valid, it must be different from IP in any configured DEVIP MO. In an X2eNodeB Read & Write MO, SECSIGIP, if valid, must be different from FIRSTSIGIP. In an X2eNodeB MO, SECLOCIP, if valid, must be different from FIRSTSIGIP or SECSIGIP. If SECLOCIP in an X2eNodeB MO is valid, it must be different from FIRSTSIGIP or SECSIGIP in any configured MME
N/A
N/A
None
Read & Write
N/A
N/A
In an X2eNodeB MO, this parameter is valid only when Read & Write SECIPSECFLAG is set to ENABLE.
N/A
N/A
In an X2eNodeB MO, this parameter is valid only when SECIPSECFLAG is set to ENABLE and SECSEGWFLAG is Read & Write set to DISABLE. This parameter, if valid, cannot be set to 0.0.0.0 or IP in any configured DEVIP MO.
N/A
N/A
None
Read & Write
N/A
N/A
In an X2eNodeB MO, SERVIP1, SERVIP2, SERVIP3, or SERVIP4 is valid if it is not 0.0.0.0. In this situation, it must be set to a valid IP address. If SERVIP1, SERVIP2, SERVIP3, or SERVIP4 in an X2eNodeB MO is valid, it must be different from IP in any configured DEVIP MO. In an X2eNodeB MO, SERVIP1, SERVIP2, SERVIP3, and SERVIP4, if valid, must be different from each other. If SERVIP1, SERVIP2, SERVIP3, or SERVIP4 in an X2eNodeB MO is valid, it must be different from SERVIP1, SERVIP2,
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
In an X2eNodeB MO, this parameter is valid only when Read & Write SERVIP1IPSECFL AG is set to ENABLE.
N/A
N/A
In an X2eNodeB MO, this parameter is valid only when SERVIP1IPSECFL AG is set to ENABLE and SERVIP1SEGWFL Read & Write AG is set to DISABLE. This parameter, if valid, cannot be set to 0.0.0.0 and must be different from IP in any configured DEVIP MO.
N/A
N/A
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
N/A
N/A
In an X2eNodeB MO, this parameter is valid only when SERVIP2IPSECFL AG is set to ENABLE and SERVIP2SEGWFL Read & Write AG is set to DISABLE. This parameter, if valid, cannot be set to 0.0.0.0 and must be different from IP in any configured DEVIP MO.
N/A
N/A
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
N/A
N/A
In an X2eNodeB MO, this parameter is valid only when SERVIP3IPSECFL AG is set to ENABLE and SERVIP3SEGWFL AG is set to Read & Write DISABLE. This parameter, if valid, cannot be set to 0.0.0.0 and must be set to an IP address different from IP in any configured DEVIP MO.
N/A
N/A
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
N/A
N/A
In an X2eNodeB MO, this parameter is valid only when SERVIP4IPSECFL AG is set to ENABLE and SERVIP4SEGWFL AG is set to Read & Write DISABLE. This parameter, if valid, cannot be set to 0.0.0.0 and must be set to an IP address different from IP in any configured DEVIP MO.
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None CNOPERATORID in an X2eNodeB MO must be the same as CnOperatorId in a configured CnOperator MO.
Read & Write
N/A
N/A
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
X2ServIP6ID in an X2ServIP6 MO must be different from that in any other X2ServIP6 MO.
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
X2SERVIP in an X2ServIP MO cannot be set to 0.0.0.0. X2SERVIP in an X2ServIP MO must be the same as IP in a configured DEVIP MO. CN, SRN, and SN Read & Write in an X2ServIP MO must be the same as those respectively in the DEVIP MO associated with X2SERVIP in the same X2ServIP MO.
N/A
N/A
None
Read & Write
N/A
N/A
In an X2eNodeB MO, this parameter is valid only when Read & Write IPSECFLAG is set to ENABLE.
N/A
N/A
In an X2ServIP MO, this parameter is valid only when IPSECFLAG is set to ENABLE. This parameter, if not set to 0.0.0.0, must be the same as IP in a configured DEVIP MO with PT set to ETH or ETHTRK. If this parameter is valid, CN, SRN, and SN in the X2SigIP MO must be the same as those in Read & Write the DEVIP MO associated with this parameter. If this parameter is valid and PT in the DEVIP MO associated with X2SERVIP is not set to LOOPINT, PN in the DEVIP MO associated with IKEIP must be the same as PN in the S1ServIP MO associated with LOCIP. In an X2ServIP MO, IKEPEERNM and IPSECPROPNM are valid only when IPSECFLAG and SEGWFLAG are both set to Read & Write ENABLE. IKEPEERNM, if valid, must be the same as PEERNAME in a configured IKEPEER MO.
N/A
N/A
N/A
N/A
In an X2ServIP MO, IKEPEERNM and IPSECPROPNM are valid only when IPSECFLAG and SEGWFLAG are both set to ENABLE. Read & Write This parameter in an X2ServIP MO, if valid, must be the same as PROPNAME in a configured IPSECPROPOSAL MO.
N/A
N/A
None
Read & Write
N/A
N/A
Read & Write
N/A
N/A
X2SIGIP6ID in an X2SigIP6 MO must Read Only be different from that in any other X2SigIP6 MO.
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
This parameter in an X2SigIP MO cannot be set to 0.0.0.0 and must be the same as IP in a configured DEVIP MO. Read & Write CN, SRN, and SN in the X2SigIP MO must be the same as those in the DEVIP MO associated with LOCIP.
N/A
N/A
N/A
None
Read & Write
N/A
N/A
In an X2SigIP MO, this parameter is valid only when Read & Write IPSECFLAG is set to ENABLE.
N/A
N/A
In an X2SigIP MO, this parameter is valid only when LOCIPSECFLAG is set to ENABLE. This parameter, if not set to 0.0.0.0, must be the same as IP in a configured DEVIP MO with PT set to ETH or ETHTRK. If this parameter is valid, CN, SRN, and SN in the X2SigIP MO must be the Read & Write same as those in the DEVIP MO associated with this parameter. If this parameter is valid and PT in the DEVIP MO associated with LOCIP is not set to LOOPINT, PN in the DEVIP MO associated with IKEIP must be the same as PN in the DEVIP associated with LOCIP. In an X2SigIP MO, IKEPEERNM and IPSECPROPNM are valid only when IPSECFLAG and SEGWFLAG are both set to Read & Write ENABLE. IKEPEERNM, if valid, must be the same as PEERNAME in a configured IKEPEER.
N/A
N/A
N/A
N/A
In an X2SigIP MO, IKEPEERNM and IPSECPROPNM are valid only when IPSECFLAG and SEGWFLAG are both set to ENABLE. Read & Write This parameter in an X2SigIP MO, if valid, must be the same as PROPNAME in a configured IPSECPROPOSAL MO. This parameter in the X2SigIP MO is valid if it is not set to 0.0.0.0. This enables the local eNodeB to set up an SCTP link based on SCTP multihoming with the peer eNodeB. This parameter, if valid, must be the same as IP in a Read & Write configured DEVIP MO. If SECLOCIP in an X2SigIP MO is valid, CN, SRN, and SN in the X2SigIP MO must be the same as those in the DEVIP MO associated with SECLOCIP, respectively.
N/A
N/A
N/A
N/A
None
Read & Write
N/A
N/A
In an X2SigIP MO, this parameter is valid only when Read & Write SECIPSECFLAG is set to ENABLE.
N/A
N/A
In an X2SigIP MO, this parameter is valid only when SECIPSECFLAG is set to ENABLE. This parameter, if not set to 0.0.0.0, must be the same as IP in a configured DEVIP MO with PT set to ETH or ETHTRK. If this parameter is valid, CN, SRN, and SN in the X2SigIP MO must be the same as those in Read & Write the DEVIP MO associated with this parameter. If this parameter is valid and PT in the DEVIP MO associated with SECLOCIP is not set to LOOPINT, PN in the DEVIP MO associated with SECLOCIKEIP must be the same as PN in the DEVIP associated with SECLOCIP. In an X2SigIP MO, SECIKEPEERNM and SECIPSECPROPN M are valid only when SECIPSECFLAG and Read & Write SECSEGWFLAG are both set to ENABLE. SECIKEPEERNM, if valid, must be the same as PEERNAME in a configured IKEPEER MO.
N/A
N/A
N/A
N/A
In an X2SigIP MO, SECIKEPEERNM and SECIPSECPROPN M are valid only when SECIPSECFLAG and SECSEGWFLAG Read & Write are both set to ENABLE. This parameter in an X2SigIP MO, if valid, must be the same as PROPNAME in a configured IPSECPROPOSAL MO.
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
In the X2SigIP MO, the value of the RtoMax parameter Read & Write must be larger than that of the RtoMin parameter.
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
N/A
N/A
Read & Write
N/A
N/A
X2ENODEBID in an X2eNodeB6 MO must be different Read Only from that in any other X2eNodeB6 MO.
N/A
N/A
N/A
FIRSTSIGIP in an X2eNodeB MO must be a valid IP address (not 0.0.0.0) different from IP in any configured DEVIP MO. FIRSTSIGIP in an X2eNodeB MO must be different Read & Write from FIRSTSIGIP or SECSIGIP in any other X2eNodeB MOs. FIRSTSIGIP in an X2eNodeB MO must be different from FIRSTSIGIP or SECSIGIP in any MME MO.
N/A
N/A
None
Read & Write
N/A
N/A
In an X2eNodeB6 MO, this parameter is valid only when Read & Write FIRSTSEGWFLAG is set to ENABLE.
N/A
N/A
In an X2eNodeB MO, FIRSTIKEIP is valid only when FIRSTIPSECFLAG is set to ENABLE and FIRSTSEGWFLAG Read & Write is set to DISABLE. This parameter, if valid, cannot be set to 0.0.0.0 or IP in any configured DEVIP MOs.
N/A
N/A
SECSIGIP in an X2eNodeB MO is valid if it is not set to 0.0.0.0. This enables the peer eNodeB to set up an SCTP link based on SCTP multihoming with the local eNodeB. SECSIGIP must be different from IP in any configured DEVIP MO if SECLOCIP in the same X2eNodeB MO is valid. Read & Write SECSIGIP, if valid, must be different from FIRSTSIGIP in the same X2eNodeB MO. In an X2eNodeB MO, a valid SECLOCIP must be different from FIRSTSIGIP or SECSIGIP. SECSIGIP in an X2eNodeB MO must be different from FIRSTSIGIP or SECSIGIP in any MME MO.
N/A
N/A
None
Read & Write
N/A
N/A
In an X2eNodeB6 MO, this parameter is valid only when Read & Write SECIPSECFLAG is set to ENABLE.
N/A
N/A
In the X2eNodeB MO, this parameter is valid when SECIPSECFLAG is set to ENABLE and SECSEGWFLAG is Read & Write set to DISABLE. This parameter, if valid, cannot be set to 0.0.0.0 or IP in any configured DEVIP MOs.
N/A
N/A
None
Read & Write
N/A
N/A
In an X2eNodeB MO, SERVIP1, SERVIP2, SERVIP3, or SERVIP4, if not set to 0.0.0.0, must be a valid IP address. In an X2eNodeB MO, SERVIP1, SERVIP2, SERVIP3, or SERVIP4, if valid, must be different from IP in any configured DEVIP MO. In an X2eNodeB Read & Write MO, SERVIP1, SERVIP2, SERVIP3, and SERVIP4, if valid, must be different from each other. SERVIP1, SERVIP2, SERVIP3, or SERVIP4 in an X2eNodeB MO, if valid, must be different from SERVIP1, SERVIP2, SERVIP3, and SERVIP4 in any
N/A
N/A
None
Read & Write
N/A
N/A
N/A
N/A
In an X2eNodeB MO, this parameter is valid only when SERVIP1IPSECFL AG is set to ENABLE and SERVIP1SEGWFL Read & Write AG is set to DISABLE. This parameter must be a valid IP address different from IP in any configured DEVIP MO. In an X2eNodeB MO, SERVIP1, SERVIP2, SERVIP3, or SERVIP4, if not set to 0.0.0.0, must be a valid IP address. In an X2eNodeB MO, SERVIP1, SERVIP2, SERVIP3, or SERVIP4, if valid, must be different from IP in any configured DEVIP MO. In an X2eNodeB Read & Write MO, SERVIP1, SERVIP2, SERVIP3, and SERVIP4, if valid, must be different from each other. SERVIP1, SERVIP2, SERVIP3, or SERVIP4 in an X2eNodeB MO, if valid, must be different from SERVIP1, SERVIP2, SERVIP3, and SERVIP4 in any
N/A
N/A
N/A
N/A
None
Read & Write
N/A
N/A
N/A
N/A
In an X2eNodeB MO, this parameter is valid only when SERVIP2IPSECFL AG is set to ENABLE and SERVIP2SEGWFL AG is set to Read & Write DISABLE. This parameter must be set to a valid IP address (not 0.0.0.0) different from IP in any configured DEVIP MO. In an X2eNodeB MO, SERVIP1, SERVIP2, SERVIP3, or SERVIP4, if not set to 0.0.0.0, must be a valid IP address. In an X2eNodeB MO, SERVIP1, SERVIP2, SERVIP3, or SERVIP4, if valid, must be different from IP in any configured DEVIP MO. In an X2eNodeB Read & Write MO, SERVIP1, SERVIP2, SERVIP3, and SERVIP4, if valid, must be different from each other. SERVIP1, SERVIP2, SERVIP3, or SERVIP4 in an X2eNodeB MO, if valid, must be different from SERVIP1, SERVIP2, SERVIP3, and SERVIP4 in any
N/A
N/A
N/A
N/A
None
Read & Write
N/A
N/A
N/A
N/A
In an X2eNodeB MO, this parameter is valid only when SERVIP3IPSECFL AG is set to ENABLE and SERVIP3SEGWFL AG is set to Read & Write DISABLE. This parameter must be set to a valid IP address (not 0.0.0.0) different from IP in any configured DEVIP MO. In an X2eNodeB MO, SERVIP1, SERVIP2, SERVIP3, or SERVIP4, if not set to 0.0.0.0, must be a valid IP address. In an X2eNodeB MO, SERVIP1, SERVIP2, SERVIP3, or SERVIP4, if valid, must be different from IP in any configured DEVIP MO. In an X2eNodeB Read & Write MO, SERVIP1, SERVIP2, SERVIP3, and SERVIP4, if valid, must be different from each other. SERVIP1, SERVIP2, SERVIP3, or SERVIP4 in an X2eNodeB MO, if valid, must be different from SERVIP1, SERVIP2, SERVIP3, and SERVIP4 in any
N/A
N/A
N/A
N/A
None
Read & Write
N/A
N/A
In an X2eNodeB MO, this parameter is valid only when Read & Write SERVIP4IKEPPER NM is set to ENABLE.
N/A
N/A
In an X2eNodeB MO, this parameter is valid only when SERVIP4IKEPPER NM is set to ENABLE and SERVIP4SEGWFL AG is set to Read & Write DISABLE. This parameter must be set to a valid IP address (not 0.0.0.0) different from IP in any configured DEVIP MO.
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
CNOPERATORID in an X2eNodeB6 MO must be the same as CnOperatorId in a configured CnOperator MO.
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
URL in a CA MO must begin with http or https, the IP address must be a Read & Write valid IP address, and the port number must range from 1 to 65535.
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
USERADDINFO in a CERTREQ MO must contain only printable ASCII Read & Write characters (the ASCII value within the range of 32 to 127).
N/A
N/A
COUNTRY in a CERTREQ MO must contain only the following printable ASCII characters: A~Z a~z Read & Write ' ( ) + , - . / 0~9 : = ?. The string length of COUNTRY in a CERTREQ MO must be 0 or 2. ORG in a CERTREQ MO must contain only printable ASCII characters (the ASCII value within the range of 32 to 127). ORGUNIT in a CERTREQ MO must contain only printable ASCII characters (the ASCII value within the range of 32 to 127).
N/A
N/A
Read & Write
N/A
N/A
Read & Write
N/A
N/A
STATEPROVINCE NAME in a CERTREQ MO must contain only Read & Write printable ASCII characters (the ASCII value within the range of 32 to 127). LOCALITY in a CERTREQ MO must contain only printable ASCII characters (the ASCII value within the range of 32 to 127).
N/A
N/A
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
LOCALNAME in a CERTREQ MO must contain only printable ASCII characters (the ASCII value within the range of 32 to 127).
Read & Write
N/A
N/A
LOCALIP in a CERTREQ MO must be a valid IP address of class A, B, or C. In addition, Read & Write it cannot be set to the reserved IP addresses 127.x.x.x or 0.x.x.x but can be set to 0.0.0.0.
N/A
N/A
The CERTMK MO with APPCERT set to appcert.pem defines a certificate configured on a BS before delivery. There is only one such MO on a BS and this MO cannot be added or removed. APPCERT in a Read Only CERTMK MO can contain only ASCII characters. The name must not contain spaces or the following characters: \ / : * ? " < > |. APPCERT in a CERTMK MO is case insensitive. None Read Only
N/A
N/A
N/A
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
On a BS, there is only one activated device certificate for Read Only each application type.
N/A
N/A
N/A
APPCERT in an APPCERT MO can contain only ASCII characters. The Read & Write name must not contain spaces or the following characters: \ / : * ? " < > |.
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
CERTNAME in a CROSSCERT MO can contain only ASCII characters. The name must not contain spaces or Read Only the following characters: \ / : * ? " < > |. CERTNAME in a CROSSCERT MO is case insensitive.
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
On a BS, there is only one TRUSTCERT MO with CERTNAME set to caroot.pem. CERTNAME in a TRUSTCERT MO can contain only Read Only ASCII characters. The name must not contain spaces or the following characters: \ / : * ? " < > |. CERTNAME in a TRUSTCERT MO is case insensitive. None Read Only
N/A
N/A
N/A
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
CERTNAME in a CRL MO can contain only ASCII characters. The name must not contain spaces or Read Only the following characters: \ / : * ? " < > |. CERTNAME in a CRL MO is case insensitive.
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
IP in a CRLTSK MO must be set to a valid IP address of class A, B, or C. In Read Only addition, It cannot be set to 127.x.x.x or 0.x.x.x (including 0.0.0.0).
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
This parameter is valid only when CRLGETMETHOD Read Only in the same CRLTSK MO is set to LDAP. Each CRLTSK MO must have a unique FILENAME and FILENAME in a CRLTSK MO is case insensitive. FILENAME in a Read Only CRLTSK MO can contain only ASCII characters. The name must not contain spaces or the following characters: \ / : * ? " < > |.
N/A
N/A
N/A
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
This parameter is valid only when CRLGETMETHOD Read Only in the same CRLTSK MO is set to LDAP. None Read & Write
N/A
N/A
N/A
N/A
N/A
In a CERTCHKTSK MO, PERIOD must Read & Write be smaller than ALMRNG.
N/A
N/A
In a CERTCHKTSK MO, PERIOD must Read & Write be smaller than ALMRNG.
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
This parameter is valid only when ACLID in the ACLRULE MO is within the range of 3000 to 3999.
Read Only
N/A
N/A
N/A
None
Read & Write
Yes
BS
Services are interrupted until the parameter is correctly set.
None
Read & Write
Yes
BS
In an ACLRULE MO, MFRG and SMPT must not be both set to YES. Read Only In the ACLRULE MO, this parameter is valid only when PT is set to TCP, UDP, or SCTP.
N/A
N/A
N/A
In the ACLRULE MO, this parameter is valid only when Read Only SMPT is set to YES.
N/A
N/A
N/A
In an ACLRULE MO, if SOP is set to OP_RANGE, SPT1 must be smaller than or equal to Read Only SPT2. In the ACLRULE MO, this parameter is valid only when SMPT is set to YES.
N/A
N/A
N/A
In an ACLRULE MO, if SOP is set to OP_RANGE, SPT1 must be smaller than or equal to SPT2. Read Only In the ACLRULE MO, this parameter is valid only when SMPT is set to YES and SOP is set to OP_RANGE.
N/A
N/A
N/A
None
Read & Write
Yes
BS
None
Read & Write
Yes
BS
In an ACLRULE MO, MFRG and DMPT must not be both set to YES. Read Only In the ACLRULE MO, this parameter is valid only when PT is set to TCP, UDP, or SCTP.
N/A
N/A
N/A
In the ACLRULE MO, this parameter is valid only when Read Only DMPT is set to YES.
N/A
N/A
N/A
In an ACLRULE MO, if DOP is set to OP_RANGE, DPT1 must be smaller than or equal to Read Only DPT2. In the ACLRULE MO, this parameter is valid only when DMPT is set to YES.
N/A
N/A
N/A
In an ACLRULE MO, if DOP is set to OP_RANGE, DPT1 must be smaller than or equal to Read Only DPT2. In the ACLRULE MO, this parameter is valid only when DOP is set to OP_RANGE.
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
In the ACLRULE MO, this parameter is valid only when Read Only MDSCP is set to YES. In an ACLRULE MO, MFRG and SMPT must not be both set to YES. In an ACLRULE MO, MFRG and DMPT must not be Read Only both set to YES. In the ACLRULE MO, this parameter is valid only when PT is set to a valid value.
N/A
N/A
N/A
N/A
N/A
N/A
This parameter is valid only when ACLID in the ACLRULE MO is within the range of 4000 to 4999.
Read & Write
Yes
BS
If ACLID ranges from 4000 to 4999 and VLANIDOP is set to OP_RANGE, Read & Write VLANID1 must be smaller than VLANID2.
Yes
BS
If ACLID ranges from 4000 to 4999 and VLANIDOP is set to OP_RANGE, Read & Write VLANID1 must be smaller than VLANID2.
Yes
BS
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
Yes
BS
None
Read & Write
Yes
BS
In an ACLRULE6 MO, this parameter is valid when PT is Read Only set to TCP, UDP, or SCTP.
N/A
N/A
N/A
In an ACLRULE6 MO, this parameter is valid when PT is Read Only set to TCP, UDP, or SCTP and SMPT is set to YES.
N/A
N/A
N/A
In an ACLRULE6 MO, if SOP is set to OP_RANGE, SPT1 must be smaller than SPT2. Read Only In an ACLRULE6 MO, this parameter is valid when PT is set to TCP, UDP, or SCTP and SMPT is set to YES.
N/A
N/A
N/A
In an ACLRULE6 MO, if SOP is set to OP_RANGE, SPT1 must be smaller than SPT2. In an ACLRULE6 Read Only MO, this parameter is valid when PT is set to TCP, UDP, or SCTP, SMPT is set to YES, and SOP is set to OP_RANGE.
N/A
N/A
N/A
None
Read & Write
Yes
BS
None
Read & Write
Yes
BS
In an ACLRULE6 MO, this parameter is valid when PT is Read Only set to TCP, UDP, or SCTP.
N/A
N/A
N/A
In an ACLRULE6 MO, this parameter is valid when PT is Read Only set to TCP, UDP, or SCTP and DMPT is set to YES.
N/A
N/A
N/A
In an ACLRULE6 MO, if DOP is set to OP_RANGE, DPT1 must be smaller than DPT2, respectively. Read Only In an ACLRULE6 MO, this parameter is valid when PT is set to TCP, UDP, or SCTP and DMPT is set to YES.
N/A
N/A
N/A
In an ACLRULE6 MO, if DOP is set to OP_RANGE, DPT1 must be smaller than DPT2, respectively. Read Only In an ACLRULE6 MO, this parameter is valid when PT is set to TCP, UDP, or SCTP, DMPT is set to YES, and DOP is set to OP_RANGE.
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
In an ACLRULE6 MO, this parameter is valid when Read Only MDSCP is set to YES.
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
SRCIP in a BFDSESSION MO must be a valid IP address of class A, B, or C. In addition, it cannot be set to Read & Write 0.x.x.x or 127.x.x.x (including 0.0.0.0). SRCIP must be different from DSTIP in a BFDSESSION MO.
Yes
BS
Less than 1 minute
DSTIP in a BFDSESSION MO must be a valid IP address of class A, B, or C. In addition, it cannot be set to Read & Write 0.x.x.x or 127.x.x.x (including 0.0.0.0). SRCIP must be different from DSTIP in a BFDSESSION MO.
Yes
BS
Less than 1 minute
In the BFDSESSION MO, if SRCIP is set to a Read & Write logical IP address, HT cannot be set to SINGLE_HOP.
Yes
BS
Less than 1 minute
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
In the CFMBNDIP MO, the total length of MANAME and Read Only MDNAME cannot exceed 44 bytes. MANAME in a CFMBNDIP MO can contain only ASCII characters. The name cannot be null characters or contain the following Read Only characters: ', ", !, ?, <, >, and \. In the CFMBNDIP MO, the total length of MANAME and MDNAME cannot exceed 44 bytes.
N/A
N/A
N/A
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
In the CFMMA MO, the total length of MANAME and Read Only MDNAME cannot exceed 44 bytes.
N/A
N/A
N/A
MANAME in a CFMMA MO can contain only ASCII characters. The name cannot be null characters or contain the following Read Only characters: ', ", !, ?, <, >, and \. In the CFMMA MO, the total length of MANAME and MDNAME cannot exceed 44 bytes. None Read Only
N/A
N/A
N/A
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
In the CFMMA MO, this parameter is valid only when Read Only BNDVLAN is set to YES. In the CFMMA MO, this parameter is valid only when Read & Write BNDVLAN is set to YES.
N/A
N/A
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
MDNAME in a CFMMD MO can contain only ASCII characters. The name cannot be null Read Only characters or contain the following characters: ', ", !, ?, <, >, and \.
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
In the CFMMEP MO, the total length of MANAME and Read Only MDNAME cannot exceed 44 bytes. In the CFMMEP MO, the total length of MANAME and MDNAME cannot exceed 44 bytes. MANAME in a CFMMEP MO can contain only ASCII Read Only characters. The name cannot be null characters or contain the following characters: ', ", !, ?, <, >, and \.
N/A
N/A
N/A
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
In a CFMMEP MO, this parameter must be set to ETH_COVERBOAR D if SN is set to a value within the range of 0 to 5. Read Only In a CFMMEP MO, this parameter can be set to BASE_BOARD or ETH_COVERBOAR D if SN is set to 6 or 7. None Read Only
N/A
N/A
N/A
N/A
N/A
N/A
In the CFMMEP MO, if PT is set to ETH and SBT is set to ETH_COVERBOAR D, the value range of this parameter is from 0 to 5. In the CFMMEP MO, if PT is set to ETH and SBT is set to BASE_BOARD, this parameter can be set to 0 or 1. Read Only In the CFMMEP MO, if PT is set to ETHTRK and SBT is set to BASE_BOARD, this parameter can be set to 0 or 1. In the CFMMEP MO, if PT is set to ETHTRK and SBT is set to ETH_COVERBOAR D, the value range of this parameter is from 0 to 2.
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
In the CFMRMEP MO, the total length of MANAME and Read Only MDNAME cannot exceed 44 bytes.
N/A
N/A
N/A
MANAME in a CFMRMEP MO can contain only ASCII characters. The name cannot be null characters or contain the following Read Only characters: ', ", !, ?, <, >, and \. In the CFMRMEP MO, the total length of MANAME and MDNAME cannot exceed 44 bytes. RMEPID in the CFMRMEP MO Read Only must be unique in the CFM MA.
N/A
N/A
N/A
N/A
N/A
N/A
MAC in the CFMRMEP MO is expressed in the format of XXXXXXXX-XXXX. It cannot be set to the broadcast MAC address (FFFFFFFF-FFFF). It also Read Only cannot be set to a multicast MAC address, which is typically 0100-5EXXXXXX or one MAC address in the range of 80XXXXXX-XXXX to FFXX-XXXX-XXXX.
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
In a DBGSVR MO, if SERVICETYPE is set to TCP, this parameter can be set to any of the following values: 22, 23, 80, 443, 1110, 1120, 2700, 4443, 6000, 6001, 6006, 6007 and 30023. Read Only In a DBGSVR MO, if SERVICETYPE is set to UDP, this parameter can be set to any of the following values: 67, 68, 319, 320, 500, 3784, 4500, 4784, 17185, 33003, and 45300.
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
In a DEVIP MO, this parameter can be set to E1_COVERBOARD or ETH_COVERBOAR D if SN is set to a value within the Read Only range of 0 to 5. In a DEVIP MO, this parameter can be set to BASE_BOARD or ETH_COVERBOAR D if SN is set to 6 or 7. In a DEVIP MO, this parameter can be set to PPP, MPGRP, ETH, ETHTRK, or LOOPINT if SBT is set to BASE_BOARD. In a DEVIP MO, this parameter can be set to ETH, ETHTRK, or Read Only LOOPINT if SBT is set to ETH_COVERBOAR D. In a DEVIP MO, this parameter can be set to PPP, MPGRP, or LOOPINT if SBT is set to E1_COVERBOARD .
N/A
N/A
N/A
N/A
N/A
N/A
In a DEVIP MO, this parameter can be set to 0 or 1 if SBT is set to BASE_BOARD and PT is set to ETH. In a DEVIP MO, this parameter can be set to 0 or 1 if SBT is set to BASE_BOARD and PT is set to ETHTRK. In a DEVIP MO, this parameter can be set to 0 or 15 if PT is set to PPP. Read Only In a DEVIP MO, this parameter can be set to 0 or 3 if PT is set to MPGRP. In a DEVIP MO, this parameter can be set to a value within the range of 0 to 5 if SBT is set to ETH_COVERBOAR D and PT is set to ETH. In a DEVIP MO, this parameter can be set to a value within the range of 0 to 2 if SBT is set to IP in the DEVIP MO must be set to a valid IP address of Class A, B, or C. In addition, it cannot be 127.x.x.x or 0.x.x.x. In the logical Read Only operation result of IP and MASK in a DEVIP MO, neither the network ID nor host ID can be all 0s or 1s after being converted into a binary value.
N/A
N/A
N/A
N/A
N/A
N/A
In a DEVIP MO, if PT is not set to LOOPINT, MASK cannot be set to all 1s. In the binary value into which MASK in the DEVIP MO is converted, 0 is not allowed to precede Read & Write 1. In the logical operation result of IP and MASK in a DEVIP MO, neither the network ID nor host ID can be all 0s or 1s after being converted into a binary value.
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
In a DEVIP6 MO, if IPV6 is set to the local address of a Read Only link, PFXLEN must be greater than or equal to 10.
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
DHCPSVRIP in a DHCPSVRIP MO must be a valid IP address of class A, Read Only B, or C. In addition, it cannot be 0.x.x.x or 127.x.x.x.
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
In the DIFPRI MO, the value range of this parameter is from 0 to 63 if PRIRULE is set to DSCP. In the DIFPRI MO, the value range of this parameter is from 0 to 7 if PRIRULE is set to IPPRECEDENCE.
Read & Write
Yes
BS
In a DIFPRI MO, OMLOWPRI must be smaller than or equal to OMHIGHPRI. In the DIFPRI MO, if PRIRULE is set to DSCP, the value Read & Write range of this parameter is from 0 to 63. In the DIFPRI MO, if PRIRULE is set to IPPRECEDENCE, the value range of this parameter is from 0 to 7.
Yes
BS
In a DIFPRI MO, OMLOWPRI must be smaller than or equal to OMHIGHPRI. In the DIFPRI MO, if PRIRULE is set to DSCP, the value Read & Write range of this parameter is from 0 to 63. In the DIFPRI MO, if PRIRULE is set to IPPRECEDENCE, the value range of this parameter is from 0 to 7.
Yes
BS
In the DIFPRI MO, if PRIRULE is set to DSCP, the value range of this parameter is from 0 to 63. Read & Write In the DIFPRI MO, if PRIRULE is set to IPPRECEDENCE, the value range of this parameter is from 0 to 7.
Yes
BS
Yes
BS
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
Yes
BS
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
Yes
BS
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
Yes
BS
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
Yes
BS
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
Yes
BS
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
Yes
BS
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
Yes
BS
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
Yes
BS
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
In the DOT1X MO, if SBT is set to BASE_BOARD, this parameter can be set to 0 or 1. In the DOT1X MO, Read Only if SBT is set to ETH_COVERBOAR D, the value range of this parameter is from 0 to 5.
N/A
N/A
N/A
In a DOT1X MO, AM must be set to EAP-TLS if ACT is set to ACTIVE.
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
In the E1T1 MO, this parameter is valid only when PS Read Only is set to SINGLEPORT.
N/A
N/A
N/A
None
Read & Write
N/A
N/A
In the E1T1 MO, this parameter is Read & Write valid only when PS is set to ALLPORT.
Yes
BS
Less than 1 minute
In an E1T1 MO, if PS is set to ALLPORT and WORKMODE is set to E1_UNBA or E1_BA, FRAME can be set to E1_DOUBLE_FRA ME or E1_CRC4_MULTI_ FRAME. In an E1T1 MO, if PS and WORKMODE are set to ALLPORT and T1, respectively, Read & Write FRAME can be set to T1_SUPER_FRAM E or T1_EXTENDED_S UPER_FRAME. If WORKMODE in an all-port E1T1 MO is set to E1_UNBA or E1_BA, FRAME can be set to E1_DOUBLE_FRA ME or E1_CRC4_MULTI_ FRAME in each single-port E1T1 MO. If
Yes
BS
Less than 1 minute
In an E1T1 MO, if PS is set to ALLPORT and WORKMODE is set to E1_UNBA or E1_BA, LNCODE can be set to AMI or HDB3. In an E1T1 MO, if PS and WORKMODE are set to ALLPORT and T1, respectively, LNCODE can be set to AMI or B8ZS. If WORKMODE in Read & Write an all-port E1T1 MO is set to E1_UNBA or E1_BA, LNCODE can be set to AMI or HDB3 in each single-port E1T1 MO. If WORKMODE in an all-port E1T1 MO is set to T1, LNCODE can be set to AMI or B8ZS in each singleport E1T1 MO. If no all-port E1T1 MO is configured, the default value of WORKMODE in
Yes
BS
Less than 1 minute
None
Read & Write
Yes
BS
Less than 1 minute
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
When adding an E1T1 MO, this parameter can be set to E1_COVERBOARD if SN is set to a value within the Read Only range of 0 to 5. When adding an E1T1 MO, this parameter can be set to BASE_BOARD if SN is set to 6 or 7.
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
In an ETHOAM3AH MO, this parameter must be set to ETH_COVERBOAR D if SN is set to a value within the range of 0 to 5. Read Only In an ETHOAM3AH MO, this parameter can be set to BASE_BOARD or ETH_COVERBOAR D if SN is set to 6 or 7.
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
In the ETHOAM3AH MO, this parameter can be set to 0 or 1 if SBT is set to BASE_BOARD. In the Read Only ETHOAM3AH MO, this parameter can be set to a value within the range of 0 to 5 if SBT is set to ETH_COVERBOAR D.
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
In an ETHOAM3AH MO, ERRFRMSCDEVT PRD must be Read Only greater than or equal to ERRFRMSCDEVTT HD.
N/A
N/A
N/A
In an ETHOAM3AH MO, ERRFRMSCDEVT PRD must be Read Only greater than or equal to ERRFRMSCDEVTT HD.
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
In the ETHPORT MO, if SN is within the range from 0 to 5, this parameter must be set to ETH_COVERBOAR D. Read Only In the ETHPORT MO, if SN is set to 6 or 7, this parameter can be set to BASE_BOARD or ETH_COVERBOAR D. In the ETHPORT MO, this parameter can be set to 0 or 1 if SBT is set to BASE_BOARD. In the ETHPORT MO, this parameter Read Only can be set to a value within the range of 0 to 5 if SBT is set to ETH_COVERBOAR D.
N/A
N/A
N/A
N/A
N/A
N/A
In the ETHPORT MO, if SBT is set to BASE_BOARD, this parameter can be set to COPPER, FIBER or AUTO. Read & Write In the ETHPORT MO, if SBT is set to ETH_COVERBOAR D, this parameter can be set to COPPER or FIBER.
Yes
BS
Less than 10 minutes
None
Read & Write
Yes
BS
In the ETHPORT MO, if SBT and PA are set to ETH_COVERBOAR D and COPPER, respectively, this parameter can be set to 10M, 100M, 1000M, or AUTO. In the ETHPORT MO, if SBT and PA are set to ETH_COVERBOAR D and FIBER, respectively, this parameter can be set to 100M, Read & Write 1000M, or AUTO. In the ETHPORT MO, if SBT and PA are set to BASE_BOARD and COPPER, respectively, this parameter can be set to 10M, 100M, or AUTO. In the ETHPORT MO, if SBT and PA are set to BASE_BOARD and FIBER, respectively, this parameter can be In the ETHPORT MO, if SPEED is set to AUTO, this parameter must be AUTO. Read & Write In the ETHPORT MO, if SPEED is set to 10M, 100M, or 1000M, this parameter must be FULL.
Yes
All the services carried on the port
Less than 1 minute
Yes
All the services carried on the port
Less than 1 minute
None
Read & Write
Yes
BS
None
Read & Write
N/A
N/A
In an ETHPORT MO, FERAT must be greater than or equal to FERDT.
Read & Write
N/A
N/A
In an ETHPORT MO, FERAT must be greater than or equal to FERDT.
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
Yes
All services over the member ports of the Less than 1 minute Ethernet trunk
None
Read & Write
N/A
N/A
In an ETHTRK MO, this parameter must be set to ETH_COVERBOAR D if SN is set to a value within the range of 0 to 5. Read Only In an ETHTRK MO, this parameter can be set to BASE_BOARD or ETH_COVERBOAR D if SN is set to 6 or 7.
N/A
N/A
N/A
None
Read & Write
Yes
All services carried on the members of Less than 1 minute the Ethernet trunk
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
In an ETHTRKLNK MO, this parameter can be set to a value within the range of 0 to 5 if SBT is set to ETH_COVERBOAR Read Only D. In an ETHTRKLNK MO, this parameter can be set to 0 or 1 if SBT is set to BASE_BOARD.
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
In an ETHTRKLNK MO, this parameter must be set to ETH_COVERBOAR D if SN is set to a value within the range of 0 to 5. Read Only In an ETHTRKLNK MO, this parameter can be set to BASE_BOARD or ETH_COVERBOAR D if SN is set to 6 or 7.
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
In the FLOODDEFEND MO, this parameter is valid only when DFDSW is set to ENABLE. In the FLOODDEFEND MO, if FLDTYPE is set to ARP, DFDTHD ranges from 1 to 512. Read & Write In the FLOODDEFEND MO, if FLDTYPE is set to ICMP or SYN, DFDTHD ranges from 1 to 1024. In the FLOODDEFEND MO, if FLDTYPE is set to TCP or UDP, DFDTHD ranges from 1 to 4096.
N/A
N/A
None
Read & Write
N/A
N/A
In the FLOODDEFEND MO, this parameter is valid only when ALMSW is set to ENABLE. In the FLOODDEFEND MO, if FLDTYPE is set to ARP, ALMTHD ranges from 1 to 512. Read & Write In the FLOODDEFEND MO, if FLDTYPE is set to ICMP or SYN, ALMTHD ranges from 1 to 1024. In the FLOODDEFEND MO, if FLDTYPE is set to TCP or UDP, ALMTHD ranges from 1 to 4096.
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
Yes
BS
Services are interrupted until the parameter is correctly set. N/A
None
Read Only
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
PEERNAME in an IKEPEER MO is case insensitive. The value of Read Only PEERNAME in an IKEPEER MO must be comprised of ASCII characters. None Read & Write
N/A
N/A
N/A
Yes
BS
Less than 1 minute
If AUTHALG in an IKEPROPOSAL MO is set to AES_XCBC_96, IKEVERSION in the Read & Write associated IKEPEER MO cannot be set to IKE_V1.
Yes
BS
Less than 1 minute
In the IKEPEER MO, this parameter is valid only when Read & Write IKEVERSION is set to IKE_V1.
Yes
BS
Less than 1 minute
None
Read & Write
Yes
BS
Less than 1 minute
REMOTEIP in an IKEPEER MO must be a valid IP address of class A, Read & Write B, or C. In addition, it cannot be set to 0.x.x.x or 127.x.x.x.
Yes
BS
Less than 1 minute
None
Read & Write
Yes
BS
Less than 1 minute
None
Read & Write
Yes
BS
Less than 1 minute
None
Read & Write
Yes
BS
Less than 1 minute
In the IKEPEER MO, this parameter is valid only when Read & Write DPD is set to PERIODIC.
Yes
BS
Less than 1 minute
Yes
BS
Less than 1 minute
Yes
BS
Less than 1 minute
None
Read & Write
Yes
BS
Less than 1 minute
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None PEERNAME in an IKEPEER6 MO is case insensitive. PEERNAME in an IKEPEER6 MO must contain only ASCII characters.
Read Only
N/A
N/A
N/A
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
If AUTHALG in an IKEPROPOSAL MO is set to AES_XCBC_96, IKEVERSION in the Read & Write associated IKEPEER6 MO cannot be set to IKE_V1.
N/A
N/A
In an IKEPEER6 MO, this parameter is valid only when Read & Write IKEVERSION is set to IKE_V1.
N/A
N/A
None
Read & Write
N/A
N/A
In an IKEPEER6 MO, REMOTEIP must be set to a global unicast address.
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
In an IKEPEER6 MO, this parameter is valid only when Read & Write DPD is set to PERIODIC.
N/A
N/A
N/A
N/A
N/A
N/A
In an IKEPEER6 MO, LOCALIP must Read & Write be set to a global unicast address.
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
If AUTHALG in an IKEPROPOSAL MO is set to AES_XCBC_96, IKEVERSION in the associated IKEPEER MO cannot be set to IKE_V1. Read & Write If AUTHALG in an IKEPROPOSAL MO is set to AES_XCBC_96, IKEVERSION in the associated IKEPEER6 MO cannot be set to IKE_V1.
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
DSTIP in an IP2RSCGRP MO must be a valid IP address of class A, B, or C. In addition, it cannot be set to 0.x.x.x or 127.x.x.x. In an IP2RSCGRP Read Only MO, the logic AND result of DSTIP and DSTMASK must be the same as DSTIP. That is, DSTIP must be set to a network IP address.
N/A
N/A
N/A
In an IP2RSCGRP MO, the logic AND result of DSTIP and DSTMASK must be the same as DSTIP. That is, DSTIP must be set to a network IP address. Read Only In the binary value into which DSTMASK in an IP2RSCGRP MO is converted, 0 cannot precede 1, but the value can be 255.255.255.255.
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
In an IP2RSCGRP MO, this parameter can be set to E1_COVERBOARD or ETH_COVERBOAR D if SN is set to a value within the range of 0 to 5. Read Only In an IP2RSCGRP MO, this parameter can be set to BASE_BOARD, BACK_BOARD or ETH_COVERBOAR D if SN is set to 6 or 7.
N/A
N/A
N/A
In an IP2RSCGRP MO, this parameter can be set to PPP or MPGRP if SBT is set to E1_COVERBOARD . In an IP2RSCGRP MO, this parameter can be set to ETH or ETHTRK if SBT is set to ETH_COVERBOAR D. Read Only In an IP2RSCGRP MO, this parameter can be set to PPP, MPGRP, ETH, or ETHTRK if SBT is set to BASE_BOARD. In an IP2RSCGRP MO, this parameter must be set to TUNNEL if SBT is set to BACK_BOARD.
N/A
N/A
N/A
In an IP2RSCGRP MO, this parameter can be set to a value within the range of 0 to 15 if PT is set to PPP. In an IP2RSCGRP MO, this parameter can be set to a value within the range of 0 to 3 if PT is set to MPGRP. In an IP2RSCGRP MO, this parameter can be set to a value within the range of 0 to 5 if Read Only SBT is set to ETH_COVERBOAR D and PT is set to ETH. In an IP2RSCGRP MO, this parameter can be set to a value within the range of 0 to 2 if SBT is set to ETH_COVERBOAR D and PT is set to ETHTRK. In an IP2RSCGRP MO, this parameter can be set to 0 or 1 if SBT is set to
N/A
N/A
N/A
None
Read & Write
N/A
N/A
This parameter is valid only when ARPSPOOFCHKS Read & Write W is set to ENABLE.
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
This parameter is valid only when INVALIDPKTCHKS Read & Write W is set to ENABLE.
N/A
N/A
None
Read & Write
N/A
N/A
This parameter is valid only when IPSECREPLAYCH Read & Write KSW is set to ENABLE.
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None
Read Only Read Only
N/A N/A
N/A N/A
N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
If PT in an IPITF6 MO is set to LOOPIF, the Read Only ITFTYPE cannot be set to VLAN.
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
In the IPITF6 MO, if SN is set to 6 or 7, this parameter can Read Only be set to BASE_BOARD.
N/A
N/A
N/A
If PT in an IPITF6 MO is set to LOOPIF, the Read Only ITFTYPE cannot be set to VLAN. In the IPITF6 MO, this parameter can be set to 0 or 1 if PT is set to ETH or TRUNK and SBT is set to BASE_BOARD. In the IPITF6 MO, Read Only this parameter can be set to a value within the range of 0 to 2 if PT is set to LOOPIF and SBT is set to BASE_BOARD. In the IPITF6 MO, this parameter is valid only when ITFTYPE is set to VLAN. None
N/A
N/A
N/A
N/A
N/A
N/A
Read Only
N/A
N/A
N/A
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
Yes
BS
Less than 1 minute
None
Read & Write
Yes
BS
Less than 1 minute
None
Read & Write
Yes
BS
Less than 1 minute
In an IPPATH MO, if LOCALIP is set to 0.0.0.0, PT must be set to PPP or MPGRP. In an IPPATH MO, this parameter can be set to PPP, MPGRP, ETH, or ETHTRK if SBT is set to BASE_BOARD. In an IPPATH MO, this parameter can be set to PPP or Read & Write MPGRP if SBT is set to E1_COVERBOARD . In an IPPATH MO, this parameter can be set to ETH or ETHTRK if SBT is set to ETH_COVERBOAR D. In an IPPATH MO, this parameter must be set to TUNNEL if SBT is set to BACK_BOARD.
Yes
BS
Less than 1 minute
In an IPPATH MO, this parameter can be set to a value within the range of 0 to 15 if PT is set to PPP. In an IPPATH MO, this parameter can be set to a value within the range of 0 to 3 if PT is set to MPGRP. In an IPPATH MO, this parameter can be set to a value within the range of 0 to 5 if SBT is set to Read & Write ETH_COVERBOAR D and PT is set to ETH. In an IPPATH MO, this parameter can be set to a value within the range of 0 to 2 if SBT is set to ETH_COVERBOAR D and PT is set to ETHTRK. In an IPPATH MO, this parameter can be set to 0 or 1 if SBT is set to BASE_BOARD and PT is set to ETH or
Yes
BS
Less than 1 minute
None
Read & Write
N/A
N/A
In the IPPATH MO, this parameter is valid only when Read & Write PATHTYPE is set to QOS. LOCALIP in an IPPATH MO must be an IP address of class A, B, or C. In addition, it cannot be set to 127.x.x.x or 0.x.x.x (including 0.0.0.0). In an IPPATH MO, Read & Write LOCALIP must be different from PEERIP. In an IPPATH MO, if LOCALIP is set to 0.0.0.0, PT must be set to PPP or MPGRP. PEERIP in an IPPATH MO must be an IP address of class A, B, or C. In addition, it cannot be set to 127.x.x.x Read & Write or 0.x.x.x. In an IPPATH MO, LOCALIP must be different from PEERIP.
Yes
BS
Yes
BS
Less than 1 minute
Yes
BS
Less than 1 minute
None
Read & Write
Yes
BS
Less than 1 minute
None
Read & Write
N/A
N/A
None
Read & Write
Yes
BS
Less than 1 minute
None
Read & Write
Yes
Interface S1 and services in the cell
Service are interrupted until the path check is disabled.
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
In the IPPATH MO, this parameter is valid only when Read & Write JNRSCGRP is set to ENABLE. None Read & Write
Yes
BS
Less than 1 minute
N/A
N/A
In an IPPATH MO, this parameter can be set to E1_COVERBOARD or ETH_COVERBOAR D if SN is set to a value within the Read & Write range of 0 to 5. In an IPPATH MO, this parameter can be set to BASE_BOARD or ETH_COVERBOAR D if SN is set to 6 or 7.
Yes
BS
Less than 1 minute
None
Read & Write
Yes
BS
Less than 1 minute
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
In an IPPATH6 MO, LOCALIP6 must be set to a global unicast address. Read Only In an IPPATH6 MO, LOCALIP6 and PEERIP6 cannot be the same. In an IPPATH6 MO, PEERIP6 must be set to a global unicast address. Read Only In an IPPATH6 MO, LOCALIP6 and PEERIP6 cannot be the same.
N/A
N/A
N/A
N/A
N/A
N/A
None
Read & Write
Yes
BS
Less than 1 minute
None
Read & Write
Yes
BS
Less than 1 minute
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
SRCIP in an IPPATHRT MO must be a valid IP address of class A, B, or C. In addition, it cannot be set to Read Only 0.x.x.x or 127.x.x.x. In an IPPATHRT MO, SRCIP must be different from DSTIP. DSTIP in an IPPATHRT MO must be a valid IP address of class A, B, or C. In addition, it cannot be set to Read Only 0.x.x.x or 127.x.x.x. In an IPPATHRT MO, SRCIP must be different from DSTIP.
N/A
N/A
N/A
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
NEXTHOPIP in an IPPATHRT MO must be a valid IP address of class A, Read Only B, or C. In addition, it cannot be set to 0.x.x.x or 127.x.x.x.
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
In an IPPMSESSION MO, if BINDPATH is set to NO, LOCALIP must be a valid IP address of class A, B, or C. In addition, it cannot be set to 0.x.x.x or Read Only 127.x.x.x. In an IPPMSESSION MO, if BINDPATH is set to NO, LOCALIP must be different from PEERIP. In an IPPMSESSION MO, if BINDPATH is set to NO, PEERIP must be a valid IP address of class A, B, or C. In addition, it cannot be set to 0.x.x.x or Read Only 127.x.x.x (including 0.0.0.0). In an IPPMSESSION MO, if BINDPATH is set to NO, LOCALIP must be different from PEERIP. In the IPPMSESSION MO, this parameter Read Only is valid only when BINDPATH is set to NO.
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
This parameter is valid only when IppmUpActState in Read Only an IPPMSESSION MO is set to PMUP.
N/A
N/A
N/A
This parameter is valid only when IppmDownActStat Read Only e in an IPPMSESSION MO is set to PMUP. This parameter is valid only when IppmDownActStat Read Only e in an IPPMSESSION MO is set to PMUP. This parameter is valid only when IppmDownActStat Read Only e in an IPPMSESSION MO is set to PMUP.
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
This parameter is valid only when IppmUpActState in Read Only an IPPMSESSION MO is set to PMUP.
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
In the IPPMSESSION MO, this parameter Read Only is valid only when BINDPATH is set to YES. None Read Only
N/A
N/A
N/A
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
In an IPRT MO, this parameter can be set to BACK_BOARD, E1_COVERBOARD , or ETH_COVERBOAR D if SN is set to a value within the Read Only range of 0 to 5. In an IPRT MO, this parameter can be set to BASE_BOARD, BACK_BOARD, or ETH_COVERBOAR D if SN is set to 6 or 7.
N/A
N/A
N/A
In an IPRT MO, this parameter can be set to PPP or MPGRP if SBT is set to BASE_BOARD or E1_COVERBOARD and RTTYPE is set Read Only to IF. In an IPRT MO, this parameter must be set to TUNNEL if SBT is set to BACK_BOARD and RTTYPE is set to IF. In an IPRT MO, this parameter can be set to a value within the range of 0 to 15 if RTTYPE is set to IF and IFT is set to PPP. In an IPRT MO, this parameter can be set to a value within the range of 0 to 3 if Read Only RTTYPE is set to IF and IFT is set to MPGRP. In an IPRT MO, this parameter can be set to a value within the range of 0 to 14 if RTTYPE is set to IF and IFT is set to TUNNEL.
N/A
N/A
N/A
N/A
N/A
N/A
In an IPRT MO, this parameter must be set to NEXTHOP if SBT is set to ETH_COVERBOAR D. In an IPRT MO, this parameter must be set to IF if SBT is set to E1_COVERBOARD Read Only . In an IPRT MO, this parameter can be set to NEXTHOP or IF if SBT is set to BASE_BOARD. In an IPRT MO, this parameter must be set to If if SBT is set to BACK_BOARD. DSTIP in an IPRT MO must be a valid IP address of class A, B, or C. It can be set to 0.0.0.0, but cannot be set to 0.x.x.x or 127.x.x.x. If one of DSTMASK and DSTIP in an IPRT MO is set to Read Only 0.0.0.0, the other must be set to 0.0.0.0, too. The result of DSTIP AND DSTMASK in an IPRT MO must be equal to DSTIP. That is, DSTIP must be set to a network IP address.
N/A
N/A
N/A
N/A
N/A
N/A
In the binary value converted from DSTMASK in an IPRT MO, 0 is not allowed to precede 1. DSTMASK can be set to 0.0.0.0 or 255.255.255.255. If one of DSTMASK and DSTIP in an IPRT MO is set to Read Only 0.0.0.0, the other must be set to 0.0.0.0, too. The result of DSTIP AND DSTMASK in an IPRT MO must be equal to DSTIP. That is, DSTIP must be set to a network IP address. NEXTHOP in an IPRT MO must be a valid IP address of Class A, B, or C. In addition, it cannot be set to 127.x.x.x, 0.x.x.x, or Read Only 255.255.255.255. In the IPRT MO, this parameter is valid only when RTTYPE is set to NEXTHOP.
N/A
N/A
N/A
N/A
N/A
N/A
None
Read & Write
Yes
BS
Less than 1 minute
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
In an IPRT6 MO, DSTIP must be set to 0 or a global unicast address. In an IPRT6 MO, Read Only DSTIP and PFXLEN must be both 0 or a value other than 0. In an IPRT6 MO, DSTIP and PFXLEN must be both 0 or a value other than 0.
N/A
N/A
N/A
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
In an IPRT6 MO, NEXTHOPIP must Read Only match NEXTHOPIP6TYPE .
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
Yes
BS
Less than 1 minute
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
In the IPSECBIND MO, if SN is within the range from 0 to 5, this parameter must be set to ETH_COVERBOAR D. Read Only In the IPSECBIND MO, if SN is set to 6 or 7, this parameter can be set to BASE_BOARD or ETH_COVERBOAR D. In the IPSECBIND MO, this parameter is valid only when Read Only SBT is set to BASE_BOARD. In an IPSECBIND MO, this parameter can be set to 0 or 1 if SBT is set to BASE_BOARD and PT is set to ETH or ETHTRK. In an IPSECBIND MO, this parameter can be set to a value within the range of 0 to 5 if Read Only SBT is set to ETH_COVERBOAR D and PT is set to ETH. In an IPSECBIND MO, this parameter can be set to a value within the range of 0 to 2 if SBT is set to ETH_COVERBOAR D and PT is set to ETHTRK. None Read Only
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
In an IPSECDTNL MO, the combination of MSPGN and Read & Write MSPSN must be different from that of SSPGN and SSPSN. In an IPSECDTNL MO, the combination of MSPGN and Read & Write MSPSN must be different from that of SSPGN and SSPSN. In an IPSECDTNL MO, the combination of MSPGN and Read & Write MSPSN must be different from that of SSPGN and SSPSN.
N/A
N/A
N/A
N/A
N/A
N/A
In an IPSECDTNL MO, the combination of MSPGN and Read & Write MSPSN must be different from that of SSPGN and SSPSN.
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
SPGN in an IPSECPOLICY MO Read Only is case insensitive.
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
Yes
BS
Less than 1 minute
None
Read & Write
Yes
BS
Less than 1 minute
None
Read Only
Yes
BS
Less than 1 minute
None
Read & Write
Yes
BS
Less than 1 minute
None
Read & Write
Yes
BS
Less than 1 minute
In the IPSECPOLICY MO, this parameter is Read & Write valid only when LTCFG is set to LOCAL.
Yes
BS
Less than 1 minute
In the IPSECPOLICY MO, this parameter is Read & Write valid only when LTCFG is set to LOCAL.
Yes
BS
Less than 1 minute
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
SPGN in an IPSECPOLICY6 MO is case insensitive.
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
In an IPSECPOLICY6 MO, this parameter Read & Write is valid only when ACLTYPE is set to IPV4.
N/A
N/A
In an IPSECPOLICY6 MO, this parameter Read & Write is valid only when ACLTYPE is set to IPV6.
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
In an IPSECPOLICY6 MO, this parameter Read & Write is valid only when LTCFG is set to LOCAL.
N/A
N/A
In an IPSECPOLICY6 MO, this parameter Read & Write is valid only when LTCFG is set to LOCAL.
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
PROPNAME in an IPSECPROPOSAL Read Only MO is case insensitive.
N/A
N/A
N/A
None
Read & Write
N/A
N/A
In the IPSECPROPOSAL MO, TRANMODE is set to ESP or AH_ESP, Read & Write ESPAUTHALG and ESPENCALG cannot be both set to NULL.
N/A
N/A
In the IPSECPROPOSAL MO, this parameter Read & Write is valid only when TRANMODE is set to AH or AH_ESP.
N/A
N/A
In an IPSECPROPOSAL MO, if TRANMODE is set to ESP or AH_ESP, ESPAUTHALG and ESPENCALG cannot be both set Read & Write to NULL. In the IPSECPROPOSAL MO, this parameter is valid only when TRANMODE is set to ESP or AH_ESP. In an IPSECPROPOSAL MO, if TRANMODE is set to ESP or AH_ESP, ESPAUTHALG and ESPENCALG cannot be both set Read & Write to NULL. In the IPSECPROPOSAL MO, this parameter is valid only when TRANMODE is set to ESP or AH_ESP.
N/A
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
IP in the LOCALIP MO must be set to a valid IP address of Class A, B, or C. In addition, it cannot be 127.x.x.x or 0.x.x.x. Read & Write In a LOCALIP MO, neither the network ID nor the host ID can be all 0s or 1s in the logical operation result of IP and MASK.
N/A
N/A
In the binary value converted from MASK in the LOCALIP MO, 0 is not allowed to precede 1. MASK cannot be 0.0.0.0 or Read & Write 255.255.255.255. In a LOCALIP MO, neither the network ID nor the host ID can be all 0s or 1s in the logical operation result of IP and MASK.
N/A
N/A
In a LOCALIP6 MO, IP6 must be a link-local address whose prefix is Read & Write greater than or equal to 10, or be a global unicast address. In a LOCALIP6 MO, if IP6 is set to the local address of Read & Write a link, PFXLEN must be greater than or equal to 10.
N/A
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
In the LR MO, if SBT is set to E1_COVERBOARD , this parameter must be set to MPGRP. In the LR MO, if SBT is set to ETH_COVERBOAR D, this parameter can be set to ETH or ETHTRK. Read Only In the LR MO, if SBT is set to BASE_BOARD, this parameter can be set to MPGRP, ETH or ETHTRK. In the LR MO, if SBT is set to BACK_BOARD, this parameter must be set to TUNNEL.
N/A
N/A
N/A
In the LR MO, this parameter can be set to a value within the range of 0 to 3 if PT is set to MPGRP. In an LR MO, this parameter can be set to a value within the range of 0 to 14 if PT is set to TUNNEL. In the LR MO, this parameter can be set to a value within the range of 0 to 5 if PT is set to ETH Read Only and SBT is set to ETH_COVERBOAR D. In the LR MO, this parameter can be set to a value within the range of 0 to 2 if PT is set to ETHTRK and SBT is set to ETH_COVERBOAR D. In the LR MO, this parameter can be set to 0 or 1 if PT is set to ETH or ETHTRK and SBT
N/A
N/A
N/A
None
Read & Write
N/A
N/A
In the LR MO, this parameter can be set to a value within the range of 32 to 31744 if PT is set to MPGRP. In the LR MO, this parameter can be set to a value within the range of 32 to 360000 if PT is set to TUNNEL. In the LR MO, this parameter can be set to a value within Read & Write the range of 32 to 1000000 if PT is set to ETH or ETHTRK and SBT is set to ETH_COVERBOAR D. In the LR MO, this parameter can be set to a value within the range of 32 to 360000 if PT is set to ETH or ETHTRK and SBT is set to BASE_BOARD.
N/A
N/A
N/A
N/A
In the LR MO, this parameter can be set to a value within the range of 0 to 155000 if PT is set to MPGRP. In the LR MO, this parameter can be set to a value within the range of 0 to 300000 if PT is set to TUNNEL. In the LR MO, this parameter can be set to a value within Read & Write the range of 0 to 1000000 if PT is set to ETH or ETHTRK and SBT is set to ETH_COVERBOAR D. In the LR MO, this parameter can be set to a value within the range of 0 to 300000 if PT is set to ETH or ETHTRK and SBT is set to BASE_BOARD. In an LR MO, this parameter can be set to E1_COVERBOARD or ETH_COVERBOAR D if SN is set to a value within the range of 0 to 5. Read Only In an LR MO, this parameter can be set to BASE_BOARD, BACK_BOARD, or ETH_COVERBOAR D if SN is set to 6 or 7.
N/A
N/A
N/A
N/A
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
In the MPGRP MO, this parameter can be set to a value Read Only within the range of 0 to 3 if SBT is set to BASE_BOARD.
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
In the MPGRP MO, this parameter is valid only when Read Only AUTH is set to PAP or CHAP. In the MPGRP MO, this parameter is valid only when Read Only AUTH is set to PAP or CHAP.
N/A
N/A
N/A
N/A
N/A
N/A
LOCALIP in an MPGRP MO must be a valid IP address of class A, B, or C. In addition, it cannot be set to the reserved IP addresses 0.x.x.x or 127.x.x.x but can be set to 0.0.0.0. In the MPGRP MO, IPMASK cannot be all 0s if LOCALIP is not all 0s. In an MPGRP MO, Read Only neither the network ID nor the host ID can be all 0s or 1s in the logical operation result of LOCALIP and IPMASK. In an MPGRP MO, LOCALIP must be different from PEERIP. In the MPGRP MO, IPMASK must be all 0s if LOCALIP is all 0s.
N/A
N/A
N/A
IPMASK in the MPGRP MO must be valid, that is, 0 is not allowed to precede 1. In addition, it can be set to 0.0.0.0 or 255.255.255.255. In the MPGRP MO, IPMASK cannot be all 0s if LOCALIP is not all 0s. In an MPGRP MO, neither the network Read Only ID nor the host ID can be all 0s or 1s in the logical operation result of LOCALIP and IPMASK. In an MPGRP MO, LOCALIP must be different from PEERIP. In the MPGRP MO, IPMASK must be all 0s if LOCALIP is all 0s.
N/A
N/A
N/A
PEERIP in an MPGRP MO must be a valid IP address of class A, B, or C. In addition, Read Only it cannot be set to the reserved IP addresses 0.x.x.x or 127.x.x.x but can be set to 0.0.0.0.
N/A
N/A
N/A
In the MPGRP MO, this parameter is valid only when Read Only MCPPP is set to ENABLE.
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
In the MPGRP MO, MAXMFLEN must be larger than MAXSFLEN and the minimum Read Only difference is 2. In the MPGRP MO, this parameter is valid only when MUXCP is set to ENABLE.
N/A
N/A
N/A
In the MPGRP MO, MAXMFLEN must be larger than MAXSFLEN and the minimum Read Only difference is 2. In the MPGRP MO, this parameter is valid only when MUXCP is set to ENABLE.
N/A
N/A
N/A
In the MPGRP MO, this parameter is valid only when Read Only MUXCP is set to ENABLE.
N/A
N/A
N/A
In the MPGRP MO, if MCPPP is set to ENABLE and MHO is set to LONG, this parameter can be set to 4 or 8. Read Only In the MPGRP MO, if MCPPP is set to ENABLE and MHO is set to SHORT, this parameter must be set to 4.
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
In the MPGRP MO, MPDAAT must be Read Only greater than or equal to MPDADT. In the MPGRP MO, MPDAAT must be Read Only greater than or equal to MPDADT.
N/A
N/A
N/A
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None None None
N/A N/A N/A
N/A N/A N/A
N/A N/A N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
In the MPGRP MO, if the value of SN is within the range from 0 to 5, this parameter must be set to E1_COVERBOARD Read Only . In the MPGRP MO, if SN is set to 6 or 7, this parameter must be set to BASE_BOARD.
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
In an MPLNK MO, SRN must be the Read Only same as E1T1SRN.
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
In the MPLNK MO, this parameter is valid only when SN Read Only and SBT are both set to valid values. In the MPLNK MO, this parameter is valid only when SN Read Only and SBT are both set to valid values.
N/A
N/A
N/A
N/A
N/A
N/A
In an MPLNK MO, Read Only SRN must be the same as E1T1SRN.
N/A
N/A
N/A
In the MPLNK MO, this parameter is valid only when SN Read Only and SBT are both set to valid values.
N/A
N/A
N/A
In the MPLNK MO, this parameter is valid only when SN, Read Only SBT, E1T1SN, and E1T1SBT are all set to valid values.
N/A
N/A
N/A
The value range of TSN in an MPLNK MO varies with the setting of WORKMODE: (1) If WORKMODE in the associated E1T1 MO is set to Read Only E1_UNBA or E1_BA, the value range is from TS1 to TS31; (2) If WORKMODE in the associated E1T1 MO is set to T1, the value range is from TS1 to TS24.
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
In an MPLNK MO, if E1T1SN is the same as SN, E1T1SBT must be the same as SBT. In the MPLNK MO, this parameter must be set to E1_COVERBOARD Read Only if the value of SN is within the range of 0 to 5. In the MPLNK MO, this parameter must be set to BASE_BOARD if the value of SN is 6 or 7.
N/A
N/A
N/A
In the MPLNK MO, this parameter is valid only when SN Read Only and SBT are both set to valid values.
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
In an MPLNK MO, if E1T1SN is the same as SN, E1T1SBT must be the same as SBT. In the MPLNK MO, Read Only this parameter is valid only when SN, SBT, E1T1SN are all set to valid values. None Read Only
N/A
N/A
N/A
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
IP in the OMCH MO must be a valid IP address of Class A, B, or C, and cannot be set to 127.X.X.X or 0.X.X.X. In an OMCH MO, if MASK is set to a value other than 255.255.255.255, neither the network ID nor the host ID can be all 0s or all 1s in the logical operation result of Read & Write IP and MASK. In an OMCH MO, IP must be different from PEERIP. In an OMCH MO, NEXTHOP must be different from IP. In an OMCH MO, if BEAR and BRT are set to IPV4 and YES, respectively, DSTIP must be different from IP. MASK in an OMCH MO must be set to a valid mask (0 is not allowed to precede 1). In an OMCH MO, this parameter can be set to 255.255.255.255 when BEAR is set to IPV4. Read & Write In an OMCH MO, if MASK is set to a value other than 255.255.255.255, neither the network ID nor the host ID can be all 0s or all 1s in the logical operation result of IP and MASK.
N/A
N/A
N/A
N/A
PEERIP in the OMCH MO must be a valid IP address of Class A, B, or C, and cannot be set to 127.X.X.X or 0.X.X.X. In an OMCH MO, if PEERMASK is not set to 255.255.255.255, Read & Write neither the network ID nor the host ID can be all 0s or all 1s in the logical operation result of PEERIP and PEERMASK. In an OMCH MO, IP must be different from PEERIP. PEERMASK in an OMCH MO must be set to a valid mask (0 is not allowed to precede 1). In an OMCH MO, this parameter can be set to 255.255.255.255 when BEAR is set to IPV4. Read & Write In an OMCH MO, if PEERMASK is not set to 255.255.255.255, neither the network ID nor the host ID can be all 0s or all 1s in the logical operation result of PEERIP and PEERMASK.
N/A
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
In the OMCH MO, this parameter is valid only when BEAR is set to Read & Write IPV4, and SN and SBT are set to valid values.
N/A
N/A
In an OMCH MO, if BRT is set to YES, DSTIP must be a valid IP address of class A, B, or C. In addition, it cannot be set to the reserved IP addresses 127.x.x.x or 0.x.x.x but can be set to 0.0.0.0. In an OMCH MO, if BRT is set to YES and one of DSTIP and DSTMASK is set to 0.0.0.0, the other must be set to Read & Write 0.0.0.0. In an OMCH MO, if BRT is set to YES, the logical AND operation result between DSTIP and DSTMASK in the OMCH MO must be equal to DSTIP. That is, DSTIP in the OMCH MO must be set to a network IP address. In an OMCH MO, if BEAR and BRT are set to IPV4 and YES, respectively,
N/A
N/A
In the OMCH MO, this parameter is valid only when Read & Write BEAR is set to IPV4 and BRT is set to YES.
N/A
N/A
In an OMCH MO, this parameter must be set to NEXTHOP if SBT and BRT are set to ETH_COVERBOAR D and YES, respectively. In an OMCH MO, this parameter can be set to NEXTHOP Read & Write or IF if SBT and BRT are set to BASE_BOAR and YES, respectively. In an OMCH MO, this parameter must be set to IF if SBT and BRT are set to BACK_BOAR and YES, respectively. In an OMCH MO, this parameter can be set to PPP or MPGRP if SBT is set to BASE_BOARD, BRT is set to YES, and RT is set to IF. Read & Write In an OMCH MO, this parameter must be set to TUNNEL if SBT is set to BACK_BOARD, BRT is set to YES, and RT is set to IF.
N/A
N/A
N/A
N/A
In an OMCH MO, this parameter can be set to a value within the range of 0 to 15 if IFT is set to PPP. In an OMCH MO, this parameter can be set to a value Read & Write within the range of 0 to 3 if IFT is set to MPGRP. In an OMCH MO, this parameter can be set to a value within the range of 0 to 14 if IFT is set to TUNNEL.
N/A
N/A
In the OMCH MO, this parameter is valid only when BRT is set to YES.
Read & Write
N/A
N/A
In an OMCH MO, NEXTHOP must be different from IP. In the OMCH MO, Read & Write this parameter is valid only when RT is set to NEXTHOP.
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
In an OMCH MO, this parameter must be set to ETH_COVERBOAR D if SN is set to a value within the range of 0 to 5. Read & Write In an OMCH MO, this parameter can be set to BASE_BOARD, BACK_BOARD or ETH_COVERBOAR D if SN is set to 6 or 7. In an OMCH6 MO, LOCALIP6 must be set to a global unicast address. Read Only In the OMCH6 MO, LOCALIP6 cannot be the same as PEERIP6. In an OMCH6 MO, PEERIP6 must be set to a global unicast address. Read & Write In the OMCH6 MO, LOCALIP6 cannot be the same as PEERIP6.
N/A
N/A
N/A
N/A
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
In a PACKETFILTER MO, this parameter can be set to any value within the range of 0 to 5 if SBT is set to ETH_COVERBOAR D and PT is set to ETH. In a PACKETFILTER MO, this parameter can be set to any value within the range of 0 to 2 if SBT is set to Read Only ETH_COVERBOAR D and PT is set to ETHTRK. In a PACKETFILTER MO, this parameter can be set to 0 or 1 if SBT is set to BASE_BOARD and PT is set to ETH or ETHTRK. In a PACKETFILTER MO, this parameter can be set to any value within the range of 0 to 14 if
N/A
N/A
N/A
This parameter is valid only when FM Read Only is set to ADV_ACL or ADV_AND_L2.
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
In a PACKETFILTER MO, this parameter must be set to ETH_COVERBOAR D if SN is set to a value within the range of 0 to 5. In a Read Only PACKETFILTER MO, this parameter can be set to BASE_BOARD, ETH_COVERBOAR D, or BACK_BOARD if SN is set to 6 or 7.
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
This parameter is valid only when FM Read Only is set to L2_ACL or ADV_AND_L2.
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
IP in a PINGFILTER MO must be a valid IP address of class A, Read Only B, or C. In addition, it cannot be set to 0.x.x.x or 127.x.x.x.
N/A
N/A
N/A
In the binary value into which MASK in a PINGFILTER MO is converted, 0 cannot precede 1. Read Only In addition, MASK can be 255.255.255.255, but cannot be 0.0.0.0.
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
In a PORTSECURITY MO, this parameter can be set to E1_COVERBOARD or ETH_COVERBOAR D if SN is set to a value within the Read Only range of 0 to 5. In a PORTSECURITY MO, this parameter can be set to BASE_BOARD or ETH_COVERBOAR D if SN is set to 6 or 7.
N/A
N/A
N/A
In a PORTSECURITY MO, this parameter can be set to ETH or E1T1 if SBT is set to BASE_BOARD. In a PORTSECURITY MO, this parameter must be set to E1T1 Read Only if SBT is set to E1_COVERBOARD . In a PORTSECURITY MO, this parameter must be set to ETH if SBT is set to ETH_COVERBOAR D.
N/A
N/A
N/A
In the PORTSECURITY MO, this parameter can be set to 0 or 1 if SBT is set to BASE_BOARD and PT is set to ETH. In the PORTSECURITY MO, this parameter can be set to a value within the range of 0 to 3 if SBT is set to BASE_BOARD and PT is set to E1T1. In the Read Only PORTSECURITY MO, this parameter can be set to a value within the range of 0 to 7 if SBT is set to E1_COVERBOARD and PT is set to E1T1. In the PORTSECURITY MO, this parameter can be set to a value within the range of 0 to 5 if SBT is set to ETH_COVERBOAR
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
In the PPPLNK MO, this parameter is valid only when SN Read Only and SBT are both set to valid values. In the PPPLNK MO, this parameter is valid only when SN Read Only and SBT are both set to valid values.
N/A
N/A
N/A
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
In the PPPLNK MO, this parameter is valid only when Read Only AUTH is set to PAP or CHAP. In the PPPLNK MO, this parameter is valid only when Read Only AUTH is set to PAP or CHAP.
N/A
N/A
N/A
N/A
N/A
N/A
The value range of TSN in a PPPLNK MO varies with the setting of WORKMODE: (1) If WORKMODE in the associated E1T1 MO is set to Read Only E1_UNBA or E1_BA, the value range is from TS1 to TS31; (2) If WORKMODE in the associated E1T1 MO is set to T1, the value range is from TS1 to TS24.
N/A
N/A
N/A
LOCALIP in a PPPLNK MO must be a valid IP address of class A, B, or C. In addition, it cannot be set to the reserved IP addresses 0.x.x.x or 127.x.x.x but can be set to 0.0.0.0. In the PPPLNK MO, IPMASK cannot be set to 0.0.0.0 if LOCALIP is not set to 0.0.0.0. In the PPPLNK MO, IPMASK must be Read Only set to 0.0.0.0 if LOCALIP is set to 0.0.0.0. In the logical operation result of LOCALIP and IPMASK in a PPPLNK MO, neither the network ID nor host ID can be all 0s or 1s after being converted into a binary value. In a PPPLNK MO, LOCALIP must be different from PEERIP.
N/A
N/A
N/A
IPMASK in the PPPLNK MO must be valid, that is, 0 is not allowed to precede 1. In addition, it can be set to 0.0.0.0 or 255.255.255.255. In the PPPLNK MO, IPMASK cannot be set to 0.0.0.0 if LOCALIP is not set to 0.0.0.0. In the PPPLNK MO, IPMASK must be set to 0.0.0.0 if Read Only LOCALIP is set to 0.0.0.0. In the logical operation result of LOCALIP and IPMASK in a PPPLNK MO, neither the network ID nor host ID can be all 0s or 1s after being converted into a binary value. In a PPPLNK MO, LOCALIP must be different from PEERIP.
N/A
N/A
N/A
PEERIP in a PPPLNK MO must be a valid IP address of class A, B, or C. In addition, Read Only it can be set to 0.0.0.0, but cannot be set to the reserved IP addresses 0.x.x.x or 127.x.x.x.
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
In the PPPLNK MO, MAXMFLEN must be larger than MAXSFLEN and the minimum Read Only difference is 2. In the PPPLNK MO, this parameter is valid only when MUXCP is set to ENABLE.
N/A
N/A
N/A
In the PPPLNK MO, MAXMFLEN must be larger than MAXSFLEN and the minimum difference is 2. In the PPPLNK MO, MRU must be Read Only greater than or equal to MAXMFLEN. In the PPPLNK MO, this parameter is valid only when MUXCP is set to ENABLE.
N/A
N/A
N/A
In the PPPLNK MO, this parameter is valid only when Read Only MUXCP is set to ENABLE.
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
In the PPPLNK MO, MRU must be Read Only greater than or equal to MAXMFLEN.
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
In the PPPLNK MO, FFDPHOLD must Read Only be smaller than FFAPHOLD. In the PPPLNK MO, FFDPHOLD must Read Only be smaller than FFAPHOLD. In the PPPLINK MO, this parameter must be set to E1_COVERBOARD if the value of SN is within the range of 0 Read Only to 5. In the PPPLINK MO, this parameter must be set to BASE_BOARD if SN is set to 6 or 7.
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
In a PRI2QUE MO, PRI0 must be Read & Write greater than or equal to PRI1.
N/A
N/A
In a PRI2QUE MO, PRI0 must be greater than or equal to PRI1. Read & Write In a PRI2QUE MO, PRI1 must be greater than or equal to PRI2.
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
In a PRI2QUE MO, PRI5 must be Read & Write greater than or equal to PRI6.
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
In an RSCGRP MO, this parameter can be set to E1_COVERBOARD or ETH_COVERBOAR D if SN is set to a value within the range of 0 to 5. Read Only In an RSCGRP MO, this parameter can be set to BASE_BOARD, BACK_BOARD or ETH_COVERBOAR D if SN is set to 6 or 7. In an RSCGRP MO, this parameter can be set to PPP, MPGRP, ETH, or ETHTRK if SBT is set to BASE_BOARD. In an RSCGRP MO, this parameter can be set to TUNNEL if SBT is set to BACK_BOARD. In an RSCGRP MO, Read Only this parameter can be set to PPP or MPGRP if SBT is set to E1_COVERBOARD . In an RSCGRP MO, this parameter can be set to ETH or ETHTRK if SBT is set to ETH_COVERBOAR D.
N/A
N/A
N/A
N/A
N/A
N/A
In an RSCGRP MO, this parameter can be set to a value within the range of 0 to 3 if PT is set to MPGRP. In an RSCGRP MO, this parameter can be set to a value within the range of 0 to 15 if PT is set to PPP. In an RSCGRP MO, this parameter can be set to a value within the range of 0 to 5 if SBT is set to Read Only ETH_COVERBOAR D and PT is set to ETH. In an RSCGRP MO, this parameter can be set to a value within the range of 0 to 2 if SBT is set to ETH_COVERBOAR D and PT is set to ETHTRK. In an RSCGRP MO, this parameter can be set to a value within the range of 0 to 1 if SBT is set to BASE_BOARD and
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
In the RSCGRP MO, this parameter must be set to Read & Write KBPS if BEAR is set to IP.
N/A
N/A
In an RSCGRP MO, TXCBS must be greater than or equal to TXBW. In an RSCGRP MO, this parameter can be set to any value within the range of 32 to 1000000 if PT is set to TUNNEL. In an RSCGRP MO, this parameter can be set to any value within the range of 32 to 1000000 if PT is set to ETH or ETHTRK. Read & Write In an RSCGRP MO, this parameter can be set to any value within the range of 32 to 150000 if SBT is set to E1_COVERBOARD and PT is set to PPP or MPGRP. In an RSCGRP MO, this parameter can be set to any value within the range of 32 to 1984 if SBT is set to BASE_BOARD and PT is set to PPP.
N/A
N/A
In an RSCGRP MO, this parameter can be set to any value within the range of 32 to 1000000 if PT is set to TUNNEL. In an RSCGRP MO, this parameter can be set to any value within the range of 32 to 1000000 if PT is set to ETH or ETHTRK. In an RSCGRP MO, this parameter can be set to any value within the range of Read & Write 32 to 540000 if SBT is set to E1_COVERBOARD and PT is set to PPP or MPGRP. In an RSCGRP MO, this parameter can be set to any value within the range of 32 to 1984 if SBT is set to BASE_BOARD and PT is set to PPP. In an RSCGRP MO, this parameter can be set to any value within the range of
N/A
N/A
In an RSCGRP MO, TXCBS must be greater than or equal to TXBW. In an RSCGRP MO, TXCBS must be greater than or equal to TXCIR. In an RSCGRP MO, TXPBS must be greater than or equal to TXCBS. In an RSCGRP MO, this parameter can be set to any value within the range of 64 to 1000000 if PT Read & Write is set to TUNNEL. In an RSCGRP MO, this parameter can be set to any value within the range of 64 to 1000000 if PT is set to ETH or ETHTRK. In an RSCGRP MO, this parameter can be set to any value within the range of 64 to 200000 if SBT is set to E1_COVERBOARD and PT is set to PPP or MPGRP.
N/A
N/A
In an RSCGRP MO, this parameter can be set to any value within the range of 64 to 1000000 if PT is set to TUNNEL. In an RSCGRP MO, this parameter can be set to any value within the range of 64 to 1000000 if PT is set to ETH or ETHTRK. In an RSCGRP MO, this parameter can be set to any value within the range of Read & Write 64 to 450000 if SBT is set to E1_COVERBOARD and PT is set to PPP or MPGRP. In an RSCGRP MO, this parameter can be set to any value within the range of 64 to 3968 if SBT is set to BASE_BOARD and PT is set to PPP. In an RSCGRP MO, this parameter can be set to any value within the range of
N/A
N/A
In the RSCGRP MO, this parameter Read Only is valid only when BEAR is set to IP.
N/A
N/A
N/A
In the RSCGRP MO, this parameter Read & Write is valid only when BEAR is set to IP.
N/A
N/A
In an RSCGRP MO, TXCBS must be greater than or equal to TXCIR. Read & Write In an RSCGRP MO, TXPIR must be greater than or equal to TXCIR.
N/A
N/A
In an RSCGRP MO, RXPIR must be Read & Write greater than or equal to RXCIR.
N/A
N/A
In an RSCGRP MO, TXPBS must be greater than or equal to TXPIR. Read & Write In an RSCGRP MO, TXPIR must be greater than or equal to TXCIR.
N/A
N/A
In an RSCGRP MO, RXPIR must be Read & Write greater than or equal to RXCIR.
N/A
N/A
In an RSCGRP MO, TXPBS must be greater than or equal to TXPIR. Read & Write In an RSCGRP MO, TXPBS must be greater than or equal to TXCBS.
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
In the RSCGRPALG MO, if SN is within the range from 0 to 5, this parameter can be set to E1_COVERBOARD or ETH_COVERBOAR D. Read Only In the RSCGRPALG MO, if SN is set to 6 or 7, this parameter can be set to BASE_BOARD, BACK_BOARD, or ETH_COVERBOAR D.
N/A
N/A
N/A
In the RSCGRPALG MO, if SBT is set to BASE_BOARD, this parameter can be set to PPP, MPGRP, ETH, or ETHTRK. In the RSCGRPALG MO, if SBT is set to BACK_BOARD, this parameter can be set to TUNNEL. Read Only In the RSCGRPALG MO, if SBT is set to E1_COVERBOARD , this parameter can be set to PPP or MPGRP. In the RSCGRPALG MO, if SBT is set to ETH_COVERBOAR D, this parameter can be set to ETH or ETHTRK.
N/A
N/A
N/A
In the RSCGRPALG MO, if PT is set to PPP, the value range of this parameter is from 0 to 15. In the RSCGRPALG MO, if PT is set to MPGRP, the value range of this parameter is from 0 to 3. In the RSCGRPALG MO, if SBT is set to BASE_BOARD and Read Only PT is set to ETH, this parameter can be set to 0 or 1. In the RSCGRPALG MO, if SBT is set to ETH_COVERBOAR D and PT is set to ETH, the value range of this parameter is from 0 to 5. In the RSCGRPALG MO, if SBT is set to BASE_BOARD and PT is set to
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
In an RSCGRPALG MO, CCTTH must Read & Write be smaller than CTTH.
N/A
N/A
In an RSCGRPALG MO, CCTTH must Read & Write be smaller than CTTH.
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A No (And no impact on the UE in idle mode)
N/A
N/A
None
Read & Write
N/A
N/A
The LOCIP parameter in the SCTPLNK MO must be a valid IP address of Class A, B, or C. In addition, it cannot be set to 127.x.x.x or 0.x.x.x. In an SCTPLNK MO, LOCIP, SECLOCIP, PEERIP, and Read & Write SECPEERIP must be mutually different with the IP address of 0.0.0.0 being excluded. That is, SECLOCIP and SECPEERIP can be both set to 0.0.0.0, while neither LOCIP nor PEERIP can be set to 0.0.0.0.
Yes
BS
Less than 1 minute
SECLOCIP in the SCTPLNK MO must be a valid IP address of Class A, B, or C. In addition, it cannot be set to 127.x.x.x or 0.x.x.x, but can be set to 0.0.0.0. In an SCTPLNK MO, LOCIP, SECLOCIP, Read & Write PEERIP, and SECPEERIP must be mutually different with the IP address of 0.0.0.0 being excluded. That is, SECLOCIP and SECPEERIP can be both set to 0.0.0.0, while neither LOCIP nor PEERIP can be set to 0.0.0.0. None Read & Write
Yes
BS
Less than 1 minute
Yes
BS
Less than 1 minute
PEERIP in the SCTPLNK MO must be a valid IP address of Class A, B, or C. In addition, it cannot be set to 127.x.x.x or 0.x.x.x. In an SCTPLNK MO, LOCIP, SECLOCIP, PEERIP, and SECPEERIP must Read & Write be mutually different with the IP address of 0.0.0.0 being excluded. That is, SECLOCIP and SECPEERIP can be both set to 0.0.0.0, while neither LOCIP nor PEERIP can be set to 0.0.0.0.
Yes
BS
Less than 1 minute
SECPEERIP in the SCTPLNK MO must be a valid IP address of Class A, B, or C. In addition, it cannot be set to 127.x.x.x or 0.x.x.x, but can be set to 0.0.0.0. In an SCTPLNK MO, LOCIP, SECLOCIP, Read & Write PEERIP, and SECPEERIP must be mutually different with the IP address of 0.0.0.0 being excluded. That is, SECLOCIP and SECPEERIP can be both set to 0.0.0.0, while neither LOCIP nor PEERIP can be set to 0.0.0.0. None Read & Write
Yes
BS
Less than 1 minute
Yes
BS
Less than 1 minute
In an SCTPLNK MO, RTOINIT must be greater than or Read & Write equal to RTOMIN and smaller than RTOMAX.
N/A
N/A
N/A
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
In an SCTPLNK MO, MAXASSOCRETR Read & Write must be larger than MAXPATHRETR.
N/A
N/A
In an SCTPLNK MO, MAXASSOCRETR Read & Write must be larger than MAXPATHRETR.
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
In the SCTPLNK MO, this parameter is valid only when Read & Write AUTOSWITCH is set to ENABLE.
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
In an SCTPLNK6 MO, LOCIP, SECLOCIP, PEERIP, and SECPEERIP must be mutually different with the IP address Read & Write of 0 being excluded. That is, SECLOCIP and SECPEERIP can be both set to 0, while neither LOCIP nor PEERIP can be set to 0. In an SCTPLNK6 MO, LOCIP, SECLOCIP, PEERIP, and SECPEERIP must be mutually different with the IP address Read & Write of 0 being excluded. That is, SECLOCIP and SECPEERIP can be both set to 0, while neither LOCIP nor PEERIP can be set to 0.
Yes
BS
Less than 1 minute
Yes
BS
Less than 1 minute
None
Read & Write
Yes
BS
Less than 1 minute
In an SCTPLNK6 MO, LOCIP, SECLOCIP, PEERIP, and SECPEERIP must be mutually different with the IP address of 0 being excluded. That is, SECLOCIP Read & Write and SECPEERIP can be both set to 0, while neither LOCIP nor PEERIP can be set to 0. In an SCTPLNK6 MO, PEERIP must be set to a global unicast address. In an SCTPLNK6 MO, LOCIP, SECLOCIP, PEERIP, and SECPEERIP must be mutually different with the IP address of 0 being excluded. That is, SECLOCIP Read & Write and SECPEERIP can be both set to 0, while neither LOCIP nor PEERIP can be set to 0. In an SCTPLNK6 MO, SECPEERIP must be set to a global unicast address.
Yes
BS
Less than 1 minute
Yes
BS
Less than 1 minute
None
Read & Write
Yes
BS
Less than 1 minute
In an SCTPLNK6 MO, RTOINIT must be greater than or Read & Write equal to RTOMIN and smaller than RTOMAX.
N/A
N/A
N/A
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
In an SCTPLNK6 MO, MAXASSOCRETR Read & Write must be larger than MAXPATHRETR.
N/A
N/A
In an SCTPLNK6 MO, MAXASSOCRETR Read & Write must be larger than MAXPATHRETR.
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read & Write
N/A
N/A
IP in the SUBNETVLAN MO must be a valid IP address of class A, Read Only B, or C. In addition, It cannot be set to 127.x.x.x or 0.x.x.x.
N/A
N/A
N/A
MASK in the SUBNETVLAN MO Read Only must be all 1s.
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
In a TACALG MO, TRMULHOCACTH must be greater Read & Write than or equal to TRMULGOLDCAC TH.
N/A
N/A
In a TACALG MO, TRMDLHOCACTH must be greater Read & Write than or equal to TRMDLGOLDCAC TH.
N/A
N/A
In a TACALG MO, TRMULHOCACTH must be greater than or equal to TRMULGOLDCAC TH. Read & Write In a TACALG MO, TRMULGOLDCAC TH must be greater than or equal to TRMULSILVERCA CTH.
N/A
N/A
In a TACALG MO, TRMDLHOCACTH must be greater than or equal to TRMDLGOLDCAC TH. Read & Write In a TACALG MO, TRMDLGOLDCAC TH must be greater than or equal to TRMDLSILVERCA CTH.
N/A
N/A
In a TACALG MO, TRMULGOLDCAC TH must be greater than or equal to TRMULSILVERCA CTH. In a TACALG MO, Read & Write TRMULSILVERCA CTH must be greater than or equal to TRMULBRONZEC ACTH.
N/A
N/A
In a TACALG MO, TRMDLGOLDCAC TH must be greater than or equal to TRMDLSILVERCA CTH. In a TACALG MO, Read & Write TRMDLSILVERCA CTH must be greater than or equal to TRMDLBRONZEC ACTH.
N/A
N/A
In a TACALG MO, TRMULSILVERCA CTH must be Read & Write greater than or equal to TRMULBRONZEC ACTH.
N/A
N/A
In a TACALG MO, TRMDLSILVERCA CTH must be Read & Write greater than or equal to TRMDLBRONZEC ACTH.
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
In a TLDRALG MO, TRMULLDRTRGT H must be greater Read & Write than TRMULLDRCLRTH .
N/A
N/A
In a TLDRALG MO, TRMDLLDRTRGT H must be greater Read & Write than TRMDLLDRCLRTH .
N/A
N/A
In a TLDRALG MO, TRMULLDRTRGT H must be greater than TRMULLDRCLRTH . Read & Write In a TLDRALG MO, TRMULLDRCLRTH must be greater than TRMULMLDTRGT H.
N/A
N/A
In a TLDRALG MO, TRMDLLDRTRGT H must be greater than TRMDLLDRCLRTH . Read & Write In a TLDRALG MO, TRMDLLDRCLRTH must be greater than TRMDLMLDTRGT H.
N/A
N/A
In a TLDRALG MO, TRMULLDRCLRTH must be greater than TRMULMLDTRGT H. Read & Write In a TLDRALG MO, TRMULMLDTRGT H must be greater than TRMULMLDCLRT H.
N/A
N/A
In a TLDRALG MO, TRMDLLDRCLRTH must be greater than TRMDLMLDTRGT H. Read & Write In a TLDRALG MO, TRMDLMLDTRGT H must be greater than TRMDLMLDCLRT H.
N/A
N/A
In a TLDRALG MO, TRMULMLDTRGT H must be greater Read & Write than TRMULMLDCLRT H.
N/A
N/A
In a TLDRALG MO, TRMDLMLDTRGT H must be greater Read & Write than TRMDLMLDCLRT H.
N/A
N/A
None
Read & Write
N/A
N/A
When TRMULOLCSWITC H in the TOLCALG MO is set to ON, the QoS of highpriority services can be ensured in the case of transport overload in the uplink. When Read & Write TRMULOLCSWITC H in the TOLCALG MO is set to OFF, the QoS of highpriority services cannot be ensured in the case of transport overload in the uplink.
N/A
N/A
If TRMDLOLCSWITC H in the TOLCALG MO is set to ON, the qualities of highpriority services are ensured. If TRMDLOLCSWITC Read & Write H in the TOLCALG MO is set to OFF, the qualities of highpriority services may deteriorate in the case of transport overload in the downlink.
N/A
N/A
In a TOLCALG MO, TRMULOLCTRIGT H must be greater than TRMULOLCRELTH . Read & Write In the TOLCALG MO, TRMULOLCTRIGT H is valid only when TRMULOLCSWITC H is set to ON.
N/A
N/A
In a TOLCALG MO, TRMULOLCTRIGT H must be greater than TRMULOLCRELTH Read & Write . In the TOLCALG MO, this parameter is valid only when TRMULOLCSWITC H is set to ON.
N/A
N/A
None
Read & Write
N/A
N/A
In a TOLCALG MO, TRMDLOLCTRIGT H must be greater than TRMDLOLCRELTH Read & Write . In the TOLCALG MO, this parameter is valid only when TRMDLOLCSWITC H is set to ON.
N/A
N/A
In a TOLCALG MO, TRMDLOLCTRIGT H must be greater than TRMDLOLCRELTH . Read & Write In the TOLCALG MO, TRMDLOLCRELTH is valid only when TRMDLOLCSWITC H is set to ON.
N/A
N/A
None
Read & Write
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
Each TUNNEL MO must have a unique combination of Read Only SCN, DCN, SSRN, DSRN, SSN, and DSN. Each TUNNEL MO must have a unique combination of Read Only SCN, DCN, SSRN, DSRN, SSN, and DSN. Each TUNNEL MO must have a unique combination of Read Only SCN, DCN, SSRN, DSRN, SSN, and DSN.
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
Each TUNNEL MO must have a unique combination of Read & Write SCN, DCN, SSRN, DSRN, SSN, and DSN. Each TUNNEL MO must have a unique combination of Read & Write SCN, DCN, SSRN, DSRN, SSN, and DSN. Each TUNNEL MO must have a unique combination of Read & Write SCN, DCN, SSRN, DSRN, SSN, and DSN.
Yes
BS
Yes
BS
Yes
BS
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
None
Read Only
N/A
N/A
N/A
In the VLANCLASS MO, this parameter is valid only when Read Only TRAFFIC is set to USERDATA.
N/A
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
In a VLANMAP MO, NEXTHOPIP must be a valid IP address of class A, Read Only B, or C. In addition, it cannot be set to 0.x.x.x or 127.x.x.x. In the binary value into which MASK in a VLANMAP MO is converted, 0 cannot precede 1. In addition, MASK can be 255.255.255.255, Read Only but cannot be 0.0.0.0. In a VLANMAP MO, the logical AND result of NEXTHOPIP and MASK cannot be 0.
N/A
N/A
N/A
N/A
N/A
N/A
This parameter must be set to a valid value when Read & Write the VLANMAP MO is being modified.
N/A
N/A
In the VLANMAP MO, this parameter is valid only when Read & Write VLANMODE is set to SINGLEVLAN. In the VLANMAP MO, this parameter is valid only when VLANMODE is set to SINGLEVLAN. This parameter is valid when the Read & Write VLANMAP MO is being modified and SETPRIO is changed from DISABLE to ENABLE.
N/A
N/A
N/A
N/A
In the VLANMAP MO, this parameter is valid only when VLANMODE is set to VLANGROUP. This parameter is valid when the Read & Write VLANMAP MO is being modified and VLANMODE is changed from SINGLEVLAN to VLANGROUP.
N/A
N/A
In the VLANMAP MO, this parameter is valid only when Read & Write VLANMODE is set to SINGLEVLAN.
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
None
Read & Write
N/A
N/A
Caution
Validation of Modification
Impact on Radio Network Performance
Introduced in Version...
Attribute
N/A
N/A
None
V100R001C00
Equipment
None
The parameter modification has no None impact on the equipment. The parameter modification has no None impact on the equipment. The parameter modification has no None impact on the equipment. The parameter modification has no None impact on the equipment. The parameter modification has no None impact on the equipment. The parameter modification has no None impact on the equipment. The parameter modification has no None impact on the equipment. The parameter modification has no None impact on the equipment. N/A None
V100R004C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R004C00
Equipment
None
V100R004C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
N/A
None
V100R001C00
Equipment
None
N/A
None
V100R004C00
Equipment
None
N/A
None
V100R004C00
Equipment
None
N/A
None
V100R004C00
Equipment
None
N/A
None
V100R004C00
Equipment
None
N/A
None
V100R004C00
Equipment
None
N/A
None
V100R004C00
Equipment
None
N/A
None
V100R004C00
Equipment
None
N/A
None
V100R004C00
Equipment
None
N/A
None
V100R004C00
Equipment
None
N/A
None
V100R004C00
Equipment
None
N/A
None
V100R004C00
Equipment
None
N/A
None
V100R004C00
Equipment
None
N/A
None
V100R004C00
Equipment
None
The BS should be reset to validate the None parameter modification.
V100R001C00
Equipment
None
The parameter modification has no None impact on the equipment.
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R001C01
Equipment
None
V100R001C01
Equipment
None
V100R001C01
Equipment
None
V100R001C01
Equipment
None
V100R001C01
Equipment
None
N/A
None
V100R001C00
Equipment
None
N/A
None
V100R002C00
Equipment
None
N/A
None
V100R002C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R005C00
Equipment
None
N/A
None
V100R001C01
Equipment
None
V100R001C01
Equipment
None
V100R001C01
Equipment
None
V100R001C01
Equipment
None
V100R001C01
Equipment
None
V100R001C01
Equipment
None
V100R001C01
Equipment
None
V100R002C00
Equipment
N/A
N/A
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
The parameter modification takes effect after the cell is automatically reset. The parameter modification takes effect after the cell is automatically reset.
None
V100R001C00
Equipment
None
None
V100R002C00
Equipment
None
V100R003C00
Equipment
None
The parameter modification takes effect after the cell is automatically reset.
None
V100R001C00
Equipment
None
None
V100R001C00
Equipment
None
None
V100R001C00
Equipment
None
None
V100R001C00
Equipment
None
The parameter modification takes effect after the cell is automatically reset. The parameter modification takes effect after the cell is automatically reset. The parameter modification takes effect after the cell is automatically reset.
None
V100R001C00
Equipment
None
None
V100R001C00
Equipment
None
None
V100R001C00
Equipment
None
None
V100R001C00
Equipment
None
None
V100R001C01
Equipment
None
None
V100R001C01
Equipment
None
None
V100R001C01
Equipment
None
None
V100R001C01
Equipment
None
None
V100R001C01
Equipment
None
None
V100R001C01
Equipment
None
None
V100R001C01
Equipment
None
None
V100R001C01
Equipment
None
None
V100R001C01
Equipment
None
None
V100R001C01
Equipment
None
None
V100R001C01
Equipment
None
None
V100R001C01
Equipment
None
None
V100R001C01
Equipment
None
None
V100R001C01
Equipment
None
None
V100R001C01
Equipment
None
None
V100R001C01
Equipment
None
None
V100R001C01
Equipment
None
None
V100R001C01
Equipment
None
None
V100R001C01
Equipment
None
None
V100R001C01
Equipment
None
None
V100R001C01
Equipment
None
None
V100R001C01
Equipment
None
None
V100R001C01
Equipment
None
None
V100R001C01
Equipment
None
None
V100R004C00
Equipment
None
None
V100R004C00
Equipment
None
None
V100R004C00
Equipment
None
None
V100R004C00
Equipment
None
None
V100R004C00
Equipment
None
None
V100R004C00
Equipment
None
None
V100R004C00
Equipment
None
None
V100R004C00
Equipment
None
None
V100R004C00
Equipment
None
None
V100R004C00
Equipment
None
None
V100R004C00
Equipment
None
None
V100R004C00
Equipment
None
None
V100R004C00
Equipment
None
None
V100R004C00
Equipment
None
None
V100R004C00
Equipment
None
None
V100R004C00
Equipment
None
V100R001C01
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
The parameter modification has no None impact on the equipment. The parameter modification has no None impact on the equipment. The parameter modification has no None impact on the equipment.
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
None
V100R005C00
Equipment
None
None
V100R005C00
Equipment
None
None
V100R005C00
Equipment
None
None
V100R005C00
Equipment
None
None
V100R005C00
Equipment
None
None
V100R005C00
Equipment
None
None
V100R005C00
Equipment
None
None
V100R005C00
Equipment
None
None
V100R005C00
Equipment
None
None
V100R005C00
Equipment
None
None
V100R005C00
Equipment
None
None
V100R005C00
Equipment
None
None
V100R005C00
Equipment
None
None
V100R005C00
Equipment
None
None
V100R005C00
Equipment
None
None
V100R005C00
Equipment
None
N/A
None
V100R001C00
Equipment
None
N/A
None
V100R001C00
Equipment
None
N/A
None
V100R001C00
Equipment
None
N/A
None
V100R001C00
Equipment
None
V100R005C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
N/A
N/A
None
V100R005C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
The parameter modification has no None impact on the equipment. N/A None
V100R003C00
Equipment
None
V100R003C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
N/A
N/A
None
V100R005C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
The parameter modification has no None impact on the equipment. The parameter modification has no None impact on the equipment. The parameter modification has no None impact on the equipment. The parameter modification has no None impact on the equipment. The parameter modification has no None impact on the equipment.
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None None None None
N/A N/A N/A N/A
None None None None
V100R003C00 V100R003C00 V100R003C00 V100R003C00
Equipment Equipment Equipment Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
This parameter must be consistent with the network plan. Otherwise, the call drop rate The parameter increases and the modification has no access success rate V100R003C00 impact on the decreases for users equipment. at the coverage edge, and the interference on neighboring cells increases. The parameter modification has no None impact on the equipment. The parameter modification has no None impact on the equipment. The parameter modification has no None impact on the equipment.
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
N/A
N/A
None
V100R005C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None None
N/A N/A
None None
V100R003C00 V100R003C00
Equipment Equipment
None None
N/A N/A
None None
V100R003C00 V100R003C00
Equipment Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
This parameter must be consistent with the network The parameter plan. Otherwise, the modification has no call drop rate V100R003C00 impact on the increases and the equipment. access success rate decreases for users at the coverage edge.
Equipment
None
V100R003C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
None
V100R003C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
N/A
V100R004C00
Equipment
None
The parameter modification has no None impact on the equipment. The parameter modification has no None impact on the equipment.
V100R004C00
Equipment
None
V100R004C00
Equipment
None
The parameter modification has no None impact on the equipment. The parameter modification has no None impact on the equipment. The parameter modification has no None impact on the equipment. The parameter modification has no None impact on the equipment.
V100R004C00
Equipment
None
V100R004C00
Equipment
None
V100R004C00
Equipment
None
V100R004C00
Equipment
None
V100R004C00
Equipment
None
N/A
None
V100R004C00
Equipment
None
N/A
None
V100R004C00
Equipment
None
N/A
None
V100R004C00
Equipment
None
N/A
None
V100R004C00
Equipment
None
N/A
None
V100R004C00
Equipment
None
N/A
None
V100R004C00
Equipment
None
N/A
None
V100R004C00
Equipment
None
N/A
None
V100R004C00
Equipment
None
N/A
None
V100R004C00
Equipment
None
N/A
None
V100R004C00
Equipment
None
N/A
None
V100R004C00
Equipment
None
N/A
None
V100R004C00
Equipment
None
N/A
None
V100R004C00
Equipment
None
N/A
None
V100R004C00
Equipment
None
N/A
None
V100R004C00
Equipment
None
N/A
None
V100R004C00
Equipment
None
N/A
None
V100R004C00
Equipment
None
N/A
None
V100R004C00
Equipment
None
N/A
None
V100R001C01
Equipment
N/A
N/A
None
V100R001C01
Equipment
N/A
N/A
None
V100R001C01
Equipment
N/A
N/A
None
V100R001C01
Equipment
None
N/A
None
V100R001C01
Equipment
None
N/A
None
V100R001C01
Equipment
The modification of priorities will affect the selection order if the clock source is selected automatically by the system.
V100R001C01
Equipment
N/A
N/A
None
V100R001C01
Equipment
N/A
N/A
None
V100R001C01
Equipment
N/A
N/A
None
V100R001C01
Equipment
N/A
N/A
None
V100R001C01
Equipment
N/A
N/A
None
V100R001C01
Equipment
N/A
N/A
None
V100R001C01
Equipment
N/A
N/A
None
V100R001C01
Equipment
The modification of priorities will affect the selection order when the clock source is selected automatically by the system.
V100R001C01
Equipment
None
N/A
None
V100R002C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R002C00
Equipment
None
N/A
None
V100R002C00
Equipment
None
N/A
None
V100R001C01
Equipment
Only the TOD clock of input type can N/A serve as a clock source.
None
V100R001C01
Equipment
N/A
N/A
None
V100R001C01
Equipment
N/A
N/A
None
V100R001C01
Equipment
N/A
N/A
None
V100R001C01
Equipment
None
V100R001C01
Equipment
The clock accuracy is affected if there is an excessively large difference (about 20 m) between the value of this parameter and the actual feeder length.
V100R001C01
Equipment
None
N/A
None
V100R001C01
Equipment
None
N/A
None
V100R001C01
Equipment
N/A
N/A
None
V100R001C01
Equipment
V100R001C01
Equipment
None
N/A
None
V100R001C01
Equipment
N/A
N/A
None
V100R001C01
Equipment
N/A
N/A
None
V100R001C01
Equipment
N/A
N/A
None
V100R001C01
Equipment
None
V100R003C00
Equipment
None
The parameter modification has no impact on the equipment.
This parameter must be consistent with the network V100R001C01 plan. Otherwise, the location precision decreases.
Equipment
None
This parameter must be consistent with the network V100R001C01 plan. Otherwise, the location precision decreases.
Equipment
None
V100R001C01
Equipment
None
V100R002C00
Equipment
None
N/A
The feeder delay should be calculated according to the actual length of the feeder. Typically, 3.8 ns delay is generated when data passes one meter feeder. For an LTE TDD cell whose radius is less V100R001C01 than 3 km, the delay must be less then 3 us; for an LTE TDD cell whose radius is greater than 3 km, the delay must be less than 5 us. Otherwise, the service performance is affected. V100R003C00
Equipment
None
Equipment
None
V100R003C00
Equipment
None
V100R002C00
Equipment
The clock accuracy is affected if there is an excessively large difference (no less than 20 m) between the value of this parameter and the actual feeder length.
V100R002C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R001C01
Equipment
None
N/A
None
V100R001C01
Equipment
None
N/A
None
V100R001C01
Equipment
None
N/A
None
V100R001C01
Equipment
None
V100R001C01
Equipment
None
N/A
None
V100R001C01
Equipment
N/A
N/A
None
V100R001C01
Equipment
When the clock source is selected automatically by the system, the modification of priorities will affect the selection order.
V100R001C01
Equipment
None
N/A
None
V100R001C01
Equipment
N/A
N/A
None
V100R001C01
Equipment
N/A
N/A
None
V100R001C01
Equipment
N/A
N/A
None
V100R001C01
Equipment
N/A
N/A
None
V100R001C01
Equipment
N/A
N/A
None
V100R001C01
Equipment
N/A
N/A
None
V100R001C01
Equipment
The parameter should be consistent with N/A configuration of the server domain.
None
V100R001C01
Equipment
None
V100R001C01
Equipment
None
V100R002C00
Equipment
None
V100R002C00
Equipment
None
V100R002C00
Equipment
None
V100R002C00
Equipment
None
V100R002C00
Equipment
N/A
N/A
None
V100R002C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
N/A
N/A
None
V100R001C01
Equipment
N/A
N/A
None
V100R001C01
Equipment
N/A
N/A
None
V100R001C01
Equipment
None
V100R001C01
Equipment
None
N/A
None
V100R001C01
Equipment
None
N/A
None
V100R002C00
Equipment
None
N/A
None
V100R002C00
Equipment
V100R001C01
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
N/A
N/A
None
V100R005C00
Equipment
N/A
N/A
None
V100R005C00
Equipment
N/A
N/A
None
V100R005C00
Equipment
None
N/A
None
V100R001C01
Equipment
N/A
N/A
None
V100R001C01
Equipment
N/A
N/A
None
V100R001C01
Equipment
N/A
N/A
None
V100R001C01
Equipment
N/A
N/A
None
V100R001C01
Equipment
None
V100R002C00
Equipment
N/A
N/A
None
V100R001C01
Equipment
N/A
N/A
None
V100R001C01
Equipment
V100R001C01
Equipment
N/A
N/A
None
V100R001C01
Equipment
None
N/A
None
V100R001C01
Equipment
None
N/A
None
V100R001C01
Equipment
None
V100R001C01
Equipment
None
V100R001C01
Equipment
None
V100R001C01
Equipment
None
V100R003C00
Equipment
N/A
N/A
None
V100R001C01
Equipment
N/A
N/A
None
V100R001C01
Equipment
N/A
N/A
None
V100R001C01
Equipment
N/A
N/A
None
V100R002C00
Equipment
N/A
N/A
None
V100R002C00
Equipment
N/A
N/A
None
V100R002C00
Equipment
None
V100R003C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
None
The parameter modification takes effect after the None board is automatically reset.
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R001C00
Equipment
None None
N/A N/A
None None
V100R003C00 V100R003C00
Equipment Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None None
N/A N/A
None None
V100R003C00 V100R003C00
Equipment Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None None
N/A N/A
None None
V100R003C00 V100R003C00
Equipment Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None None
N/A N/A
None None
V100R002C00 V100R002C00
Equipment Equipment
None
N/A
None
V100R002C00
Equipment
None None
N/A N/A
None None
V100R002C00 V100R002C00
Equipment Equipment
None
N/A
None
V100R002C00
Equipment
None
N/A
None
V100R002C00
Equipment
None
N/A
None
V100R002C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R001C00
Equipment
None None
N/A N/A
None None
V100R003C00 V100R003C00
Equipment Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None None
N/A N/A
None None
V100R003C00 V100R003C00
Equipment Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None None
N/A N/A
None None
V100R003C00 V100R003C00
Equipment Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None None
N/A N/A
None None
V100R002C00 V100R002C00
Equipment Equipment
None
N/A
None
V100R002C00
Equipment
None None
N/A N/A
None None
V100R002C00 V100R002C00
Equipment Equipment
None
N/A
None
V100R002C00
Equipment
None
N/A
None
V100R002C00
Equipment
None
N/A
None
V100R002C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
None
The parameter modification has no None impact on the equipment. The parameter modification has no None impact on the equipment. The parameter modification has no None impact on the equipment. The parameter modification has no None impact on the equipment. The parameter modification has no None impact on the equipment. The parameter modification has no None impact on the equipment.
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None None
N/A N/A
None None
V100R003C00 V100R003C00
Equipment Equipment
None
N/A
None
V100R003C00
Equipment
N/A
N/A
None
V100R002C00
Equipment
None
N/A
None
V100R002C00
Equipment
None
N/A
None
V100R002C00
Equipment
None
N/A
None
V100R002C00
Equipment
None
N/A
None
V100R002C00
Equipment
None None None
N/A N/A N/A
None None None
V100R002C00 V100R002C00 V100R002C00
Equipment Equipment Equipment
None
N/A
None
V100R002C00
Equipment
None
N/A
None
V100R002C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R005C00
Equipment
None
V100R003C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R001C00
Equipment
None None
N/A N/A
None None
V100R003C00 V100R003C00
Equipment Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None None
N/A N/A
None None
V100R003C00 V100R003C00
Equipment Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None None
N/A N/A
None None
V100R003C00 V100R003C00
Equipment Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None None
N/A N/A
None None
V100R002C00 V100R002C00
Equipment Equipment
None
N/A
None
V100R002C00
Equipment
None None
N/A N/A
None None
V100R002C00 V100R002C00
Equipment Equipment
None
N/A
None
V100R002C00
Equipment
None
N/A
None
V100R002C00
Equipment
None
N/A
None
V100R002C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
None None
N/A N/A
None None
V100R003C00 V100R003C00
Equipment Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R001C00
Equipment
None None
N/A N/A
None None
V100R003C00 V100R003C00
Equipment Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None None
N/A N/A
None None
V100R003C00 V100R003C00
Equipment Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None None
N/A N/A
None None
V100R003C00 V100R003C00
Equipment Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None None
N/A N/A
None None
V100R002C00 V100R002C00
Equipment Equipment
None
N/A
None
V100R002C00
Equipment
None None
N/A N/A
None None
V100R002C00 V100R002C00
Equipment Equipment
None
N/A
None
V100R002C00
Equipment
None
N/A
None
V100R002C00
Equipment
None
N/A
None
V100R002C00
Equipment
None
V100R003C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R001C00
Equipment
None None
N/A N/A
None None
V100R003C00 V100R003C00
Equipment Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None None
N/A N/A
None None
V100R003C00 V100R003C00
Equipment Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None None
N/A N/A
None None
V100R003C00 V100R003C00
Equipment Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None None
N/A N/A
None None
V100R002C00 V100R002C00
Equipment Equipment
None
N/A
None
V100R002C00
Equipment
None None
N/A N/A
None None
V100R002C00 V100R002C00
Equipment Equipment
None
N/A
None
V100R002C00
Equipment
None
N/A
None
V100R002C00
Equipment
None
N/A
None
V100R002C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
N/A N/A
N/A N/A
None None
V100R003C00 V100R003C00
Equipment Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R001C00
Equipment
None None
N/A N/A
None None
V100R003C00 V100R003C00
Equipment Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None None
N/A N/A
None None
V100R003C00 V100R003C00
Equipment Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None None
N/A N/A
None None
V100R003C00 V100R003C00
Equipment Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None None
N/A N/A
None None
V100R002C00 V100R002C00
Equipment Equipment
None
N/A
None
V100R002C00
Equipment
None None
N/A N/A
None None
V100R002C00 V100R002C00
Equipment Equipment
None
N/A
None
V100R002C00
Equipment
None
N/A
None
V100R002C00
Equipment
None
N/A
None
V100R002C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R001C00
Equipment
None None
N/A N/A
None None
V100R003C00 V100R003C00
Equipment Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None None
N/A N/A
None None
V100R003C00 V100R003C00
Equipment Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None None
N/A N/A
None None
V100R003C00 V100R003C00
Equipment Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None None
N/A N/A
None None
V100R002C00 V100R002C00
Equipment Equipment
None
N/A
None
V100R002C00
Equipment
None None
N/A N/A
None None
V100R002C00 V100R002C00
Equipment Equipment
None
N/A
None
V100R002C00
Equipment
None
N/A
None
V100R002C00
Equipment
None
N/A
None
V100R002C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R001C00
Equipment
None None
N/A N/A
None None
V100R003C00 V100R003C00
Equipment Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None None
N/A N/A
None None
V100R003C00 V100R003C00
Equipment Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None None
N/A N/A
None None
V100R003C00 V100R003C00
Equipment Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None None
N/A N/A
None None
V100R002C00 V100R002C00
Equipment Equipment
None
N/A
None
V100R002C00
Equipment
None None
N/A N/A
None None
V100R002C00 V100R002C00
Equipment Equipment
None
N/A
None
V100R002C00
Equipment
None
N/A
None
V100R002C00
Equipment
None
N/A
None
V100R002C00
Equipment
None
V100R005C00
Equipment
None
V100R005C00
Equipment
None
V100R005C00
Equipment
None
V100R005C00
Equipment
The start time should be earlier than the end time. If the start time is not specified, the default start time, namely 2000-01-01 00:00:00, is used.
V100R005C00
Equipment
The end time should be later than the start time. If the end time is not specified, the default end time, namely 2037-12-31 23:59:59, is used.
V100R005C00
Equipment
None
V100R005C00
Equipment
None
N/A
None
V100R005C00
Equipment
None
V100R005C00
Equipment
None
V100R005C00
Equipment
None
V100R005C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R001C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None None
N/A N/A
None None
V100R003C00 V100R003C00
Equipment Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None None
N/A N/A
None None
V100R003C00 V100R003C00
Equipment Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None None
N/A N/A
None None
V100R002C00 V100R002C00
Equipment Equipment
None
N/A
None
V100R002C00
Equipment
None None
N/A N/A
None None
V100R002C00 V100R002C00
Equipment Equipment
None
N/A
None
V100R002C00
Equipment
None
N/A
None
V100R002C00
Equipment
None
N/A
None
V100R002C00
Equipment
N/A
N/A
None
V100R001C00
Equipment
N/A
N/A
None
V100R001C00
Equipment
N/A
N/A
None
V100R001C00
Equipment
If the manager is not specified, the EMU cannot be operated or maintained.
V100R001C00
Equipment
If the manager is not specified, the EMU cannot be operated or maintained.
V100R001C00
Equipment
If the actual connection is inconsistent with the configuration, the EMU cannot be maintained.
V100R001C00
Equipment
The communication address of the EMU is usually 2. If it is not 2, set it according to the physical DIP switch settings.
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None None
N/A N/A
None None
V100R001C00 V100R001C00
Equipment Equipment
None
N/A
None
V100R001C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R001C00
Equipment
None None
N/A N/A
None None
V100R003C00 V100R003C00
Equipment Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None None
N/A N/A
None None
V100R003C00 V100R003C00
Equipment Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None None
N/A N/A
None None
V100R003C00 V100R003C00
Equipment Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None None
N/A N/A
None None
V100R002C00 V100R002C00
Equipment Equipment
None
N/A
None
V100R002C00
Equipment
None None
N/A N/A
None None
V100R002C00 V100R002C00
Equipment Equipment
None
N/A
None
V100R002C00
Equipment
None
N/A
None
V100R002C00
Equipment
None
N/A
None
V100R002C00
Equipment
N/A
N/A
None
V100R001C00
Equipment
N/A
N/A
None
V100R001C00
Equipment
N/A
N/A
None
V100R001C00
Equipment
If the manager is not specified, the FMU cannot be operated or maintained.
V100R001C00
Equipment
If the manager is not specified, the FMU cannot be operated or maintained.
V100R001C00
Equipment
None
V100R001C00
Equipment
The communication address of the FMU is usually 14. If it is not 14, set it according to the settings of physical DIP switch. Otherwise, the communication with the FMU fails.
V100R001C00
Equipment
None
V100R001C00
Equipment
None
N/A
None
V100R001C00
Equipment
None
N/A
None
V100R001C00
Equipment
None
N/A
None
V100R001C00
Equipment
None
N/A
None
V100R001C00
Equipment
The FMU cannot be operated or maintained if no manager is specified.
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R001C00
Equipment
None None
N/A N/A
None None
V100R003C00 V100R003C00
Equipment Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None None
N/A N/A
None None
V100R003C00 V100R003C00
Equipment Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None None
N/A N/A
None None
V100R003C00 V100R003C00
Equipment Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None None
N/A N/A
None None
V100R002C00 V100R002C00
Equipment Equipment
None
N/A
None
V100R002C00
Equipment
None None
N/A N/A
None None
V100R002C00 V100R002C00
Equipment Equipment
None
N/A
None
V100R002C00
Equipment
None
N/A
None
V100R002C00
Equipment
None
N/A
None
V100R002C00
Equipment
N/A
N/A
None
V100R001C00
Equipment
N/A
N/A
None
V100R001C00
Equipment
N/A
N/A
None
V100R001C00
Equipment
If the manager is not specified, the TCU cannot be operated or maintained.
V100R001C00
Equipment
If the manager is not specified, the TCU cannot be operated or maintained.
V100R001C00
Equipment
If the actual connection is inconsistent with the data configuration, the TCU cannot be maintained.
V100R001C00
Equipment
The communication address of the TCU is usually 7. If it is not 7, set it according to the physical DIP switch settings.
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None None
N/A N/A
None None
V100R003C00 V100R001C00
Equipment Equipment
None
N/A
None
V100R001C00
Equipment
None
N/A
None
V100R001C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None None
N/A N/A
None None
V100R003C00 V100R003C00
Equipment Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R001C00
Equipment
None None
N/A N/A
None None
V100R003C00 V100R003C00
Equipment Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None None
N/A N/A
None None
V100R003C00 V100R003C00
Equipment Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None None
N/A N/A
None None
V100R003C00 V100R003C00
Equipment Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None None
N/A N/A
None None
V100R002C00 V100R002C00
Equipment Equipment
None
N/A
None
V100R002C00
Equipment
None None
N/A N/A
None None
V100R002C00 V100R002C00
Equipment Equipment
None
N/A
None
V100R002C00
Equipment
None
N/A
None
V100R002C00
Equipment
None
N/A
None
V100R002C00
Equipment
N/A
N/A
None
V100R001C00
Equipment
N/A
N/A
None
V100R001C00
Equipment
N/A
N/A
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
N/A
N/A
None
V100R001C00
Equipment
N/A
N/A
None
V100R001C00
Equipment
N/A
N/A
None
V100R001C00
Equipment
If the manager is not specified, the PMU cannot be operated or maintained.
V100R001C00
Equipment
If the manager is not specified, the PMU cannot be operated or maintained.
V100R001C00
Equipment
If the actual connection is inconsistent with the data configuration, the PMU cannot be maintained.
V100R001C00
Equipment
The communication address must be consistent with the DIP switch settings on the PMU. Otherwise, the communication fails.
V100R001C00
Equipment
N/A
N/A
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
N/A
None
V100R001C00
Equipment
None None
N/A N/A
None None
V100R001C00 V100R001C00
Equipment Equipment
None
N/A
None
V100R001C00
Equipment
None
N/A
None
V100R001C00
Equipment
None
N/A
None
V100R001C00
Equipment
None
N/A
None
V100R001C00
Equipment
None
N/A
None
V100R001C00
Equipment
None
N/A
None
V100R001C00
Equipment
None
N/A
None
V100R001C00
Equipment
None
N/A
None
V100R001C00
Equipment
None
N/A
None
V100R001C00
Equipment
None
N/A
None
V100R001C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None None
N/A N/A
None None
V100R003C00 V100R003C00
Equipment Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R005C00
Equipment
None
N/A
None
V100R005C00
Equipment
None
N/A
None
V100R005C00
Equipment
None
N/A
None
V100R005C00
Equipment
None
N/A
None
V100R005C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R001C00
Equipment
None None
N/A N/A
None None
V100R003C00 V100R003C00
Equipment Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None None
N/A N/A
None None
V100R003C00 V100R003C00
Equipment Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None None
N/A N/A
None None
V100R003C00 V100R003C00
Equipment Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None None
N/A N/A
None None
V100R002C00 V100R002C00
Equipment Equipment
None
N/A
None
V100R002C00
Equipment
None None
N/A N/A
None None
V100R002C00 V100R002C00
Equipment Equipment
None
N/A
None
V100R002C00
Equipment
None
N/A
None
V100R002C00
Equipment
None
N/A
None
V100R002C00
Equipment
N/A
N/A
None
V100R001C00
Equipment
N/A
N/A
None
V100R001C00
Equipment
N/A
N/A
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
N/A
N/A
None
V100R001C00
Equipment
N/A
N/A
None
V100R001C00
Equipment
N/A
N/A
None
V100R001C00
Equipment
The INSTALLTYPE of the SC48200 PMU is set to OUTER only. Do not modify it.
V100R001C00
Equipment
The battery of the SC48200 PMU is not related to this parameter. Do not modify it.
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R003C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R001C00
Equipment
None
V100R003C00
Equipment
N/A
N/A
None
V100R001C00
Equipment
N/A
N/A
None
V100R001C00
Equipment
N/A
N/A
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
N/A
None
V100R001C00
Equipment
None
N/A
None
V100R001C00
Equipment
None
N/A
None
V100R001C00
Equipment
None
N/A
None
V100R001C00
Equipment
None
N/A
None
V100R001C00
Equipment
None
N/A
None
V100R001C00
Equipment
None
N/A
None
V100R001C00
Equipment
None
N/A
None
V100R001C00
Equipment
None
N/A
None
V100R001C00
Equipment
None
N/A
None
V100R001C00
Equipment
N/A
N/A
None
V100R001C00
Equipment
N/A
N/A
None
V100R001C00
Equipment
N/A
N/A
None
V100R001C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R001C00
Equipment
None None
N/A N/A
None None
V100R003C00 V100R003C00
Equipment Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None None
N/A N/A
None None
V100R003C00 V100R003C00
Equipment Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None None
N/A N/A
None None
V100R003C00 V100R003C00
Equipment Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None None
N/A N/A
None None
V100R002C00 V100R002C00
Equipment Equipment
None
N/A
None
V100R002C00
Equipment
None None
N/A N/A
None None
V100R002C00 V100R002C00
Equipment Equipment
None
N/A
None
V100R002C00
Equipment
None
N/A
None
V100R002C00
Equipment
None
N/A
None
V100R002C00
Equipment
N/A
N/A
None
V100R001C00
Equipment
N/A
N/A
None
V100R001C00
Equipment
N/A
N/A
None
V100R001C00
Equipment
N/A
N/A
None
V100R001C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
N/A
V100R001C00
Equipment
N/A
N/A
None
V100R001C00
Equipment
N/A
N/A
None
V100R001C00
Equipment
N/A
N/A
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
N/A
N/A
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R001C00
Equipment
None None
N/A N/A
None None
V100R003C00 V100R003C00
Equipment Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None None
N/A N/A
None None
V100R003C00 V100R003C00
Equipment Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None None
N/A N/A
None None
V100R003C00 V100R003C00
Equipment Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
The parameter modification has no None impact on the equipment. The parameter modification has no None impact on the equipment. N/A None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None None
N/A N/A
None None
V100R003C00 V100R003C00
Equipment Equipment
None
N/A
None
V100R003C00
Equipment
N/A
N/A
None
V100R005C00
Equipment
None
N/A
None
V100R005C00
Equipment
None
N/A
None
V100R005C00
Equipment
None None
N/A N/A
None None
V100R002C00 V100R002C00
Equipment Equipment
None
N/A
None
V100R002C00
Equipment
None None
N/A N/A
None None
V100R002C00 V100R002C00
Equipment Equipment
None
N/A
None
V100R002C00
Equipment
None
N/A
None
V100R002C00
Equipment
None
N/A
None
V100R002C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None None
N/A N/A
None None
V100R003C00 V100R003C00
Equipment Equipment
None
N/A
None
V100R003C00
Equipment
N/A
N/A
None
V100R005C00
Equipment
None
N/A
None
V100R005C00
Equipment
None
N/A
None
V100R005C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R001C00
Equipment
None None
N/A N/A
None None
V100R003C00 V100R003C00
Equipment Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None None
N/A N/A
None None
V100R003C00 V100R003C00
Equipment Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None None
N/A N/A
None None
V100R003C00 V100R003C00
Equipment Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None None
N/A N/A
None None
V100R002C00 V100R002C00
Equipment Equipment
None
N/A
None
V100R002C00
Equipment
None None
N/A N/A
None None
V100R002C00 V100R002C00
Equipment Equipment
None
N/A
None
V100R002C00
Equipment
None
N/A
None
V100R002C00
Equipment
None
N/A
None
V100R002C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
None
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R001C00
Equipment
None None
N/A N/A
None None
V100R003C00 V100R003C00
Equipment Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None None
N/A N/A
None None
V100R003C00 V100R003C00
Equipment Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None None
N/A N/A
None None
V100R003C00 V100R003C00
Equipment Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None None
N/A N/A
None None
V100R003C00 V100R003C00
Equipment Equipment
None
N/A
None
V100R003C00
Equipment
N/A
N/A
None
V100R005C00
Equipment
None
N/A
None
V100R005C00
Equipment
None
N/A
None
V100R005C00
Equipment
None None
N/A N/A
None None
V100R002C00 V100R002C00
Equipment Equipment
None
N/A
None
V100R002C00
Equipment
None None
N/A N/A
None None
V100R002C00 V100R002C00
Equipment Equipment
None
N/A
None
V100R002C00
Equipment
None
N/A
None
V100R002C00
Equipment
None
N/A
None
V100R002C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
None
V100R003C00
Equipment
N/A N/A
N/A N/A
None None
V100R003C00 V100R003C00
Equipment Equipment
N/A
N/A
None
V100R003C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
N/A N/A
N/A N/A
None None
V100R003C00 V100R003C00
Equipment Equipment
N/A
N/A
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R001C00
Equipment
None None
N/A N/A
None None
V100R003C00 V100R003C00
Equipment Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None None
N/A N/A
None None
V100R003C00 V100R003C00
Equipment Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None None
N/A N/A
None None
V100R003C00 V100R003C00
Equipment Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None None
N/A N/A
None None
V100R003C00 V100R003C00
Equipment Equipment
None
N/A
None
V100R003C00
Equipment
N/A
N/A
None
V100R005C00
Equipment
None
N/A
None
V100R005C00
Equipment
None
N/A
None
V100R005C00
Equipment
None None
N/A N/A
None None
V100R002C00 V100R002C00
Equipment Equipment
None
N/A
None
V100R002C00
Equipment
None None
N/A N/A
None None
V100R002C00 V100R002C00
Equipment Equipment
None
N/A
None
V100R002C00
Equipment
None
N/A
None
V100R002C00
Equipment
None
N/A
None
V100R002C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
If this parameter is modified, the cells carried by the RRUs behind the breakpoint on the RRU chain become unavailable. The cells carried by the RRUs between breakpoints 1 and 2 on the RRU ring become unavailable.
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R002C00
Equipment
None
V100R005C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R005C00
Equipment
None
N/A
None
V100R005C00
Equipment
None
N/A
None
V100R005C00
Equipment
None
N/A
None
V100R005C00
Equipment
None
N/A
None
V100R005C00
Equipment
None
N/A
None
V100R005C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None None None
N/A N/A N/A
None None None
V100R003C00 V100R003C00 V100R003C00
Equipment Equipment Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R005C00
Equipment
None
N/A
None
V100R005C00
Equipment
None
N/A
None
V100R005C00
Equipment
None
N/A
None
V100R005C00
Equipment
None
N/A
None
V100R005C00
Equipment
None
N/A
None
V100R005C00
Equipment
None
N/A
None
V100R005C00
Equipment
None
N/A
None
V100R005C00
Equipment
None
N/A
None
V100R005C00
Equipment
None
N/A
None
V100R005C00
Equipment
None
N/A
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R002C00
Equipment
None
N/A
None
V100R002C00
Equipment
None
V100R002C00
Equipment
None
V100R002C00
Equipment
None
V100R002C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
V100R001C00
Equipment
None
N/A
None
V100R001C00
Equipment
None
N/A
None
V100R001C00
Equipment
None
N/A
None
V100R001C00
Equipment
None
V100R001C00
Equipment
N/A
N/A
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Equipment
None
V100R003C00
Equipment
None
N/A
None
V100R003C00
Radio
None
N/A
None
V100R003C00
Radio
None
V100R003C00
Radio
None
V100R005C00
Radio
None
N/A
None
V100R003C00
Radio
None
N/A
None
V100R003C00
Radio
None
V100R003C00
Radio
None
V100R005C00
Radio
None
N/A
None
V100R003C00
Radio
None
V100R003C00
Radio
None
V100R003C00
Radio
None
V100R003C00
Radio
None
V100R003C00
Radio
None
V100R003C00
Radio
None
V100R003C00
Radio
None
N/A
None
V100R004C00
Radio
None
N/A
None
V100R004C00
Radio
None
N/A
None
V100R004C00
Radio
None
N/A
None
V100R003C00
Radio
None
N/A
None
V100R003C00
Radio
None
N/A
None
V100R003C00
Radio
The absolute priorities of frequencies in one system used for cell reselection must be all higher than or lower than the priorities of frequencies in another system. Overlaps between priority ranges are not allowed. It is recommended that priority values be reserved for various systems to prevent overlaps between priority ranges for the systems.
V100R003C00
Radio
None
V100R004C00
Radio
None
N/A
None
V100R005C00
Radio
None
N/A
None
V100R005C00
Radio
None
A bearer of QCI 5 carries IMS signaling that is generally transmitted together with service data. It is recommended that the ServiceIfHoCfgGrou p MO has the same configuration for QCI 5 and the QCI of the coThe parameter transmitted service modification has no data. V100R005C00 impact on the It is also equipment. recommended that QCIs of default bearers be configured to prohibit handovers. If QCIs of default bearers are configured to allow handovers, the UE is immediately handed over to the target frequency after accessing the network.
Radio
None
V100R005C00
Radio
None
N/A
None
V100R003C00
Radio
None
N/A
None
V100R003C00
Radio
None
V100R003C00
Radio
None
N/A
None
V100R003C00
Radio
None
V100R003C00
Radio
None
V100R003C00
Radio
None
V100R003C00
Radio
None
V100R004C00
Radio
None
V100R004C00
Radio
None
V100R004C00
Radio
None
V100R005C00
Radio
None
If the values of CounterCheckTimer and CounterCheckCoun tNum are too small, the counter check procedures are performed too frequently, which The parameter wastes radio modification has no interface resources. V100R001C01 impact on the If the values are too equipment. large, the counter check procedure fails to be initiated during a long time, which results in the failure to check the HFN on the UE side and that on the eNodeB side. If the values of CounterCheckTimer and CounterCheckCoun tNum are too small, the counter check procedures are performed too frequently, which The parameter wastes radio modification has no interface resources. V100R001C01 impact on the If the values are too equipment. large, the counter check procedure fails to be initiated during a long time, which causes the failure to check the HFN on the UE side and that on the eNodeB side.
Radio
None
Radio
None
If this switch is set to ON, a DRB is released when the counter check detects an The parameter unexpected result in modification has no the DRB. If this V100R001C01 impact on the switch is set to equipment. OFF, a DRB is not released even if the counter check detects an unexpected result in the DRB.
Radio
None
V100R003C00
Radio
None
V100R003C00
Radio
None
V100R003C00
Radio
None
The setting of this parameter has an impact on how long the eNodeB will wait for a response message from the MME. If this parameter is set to an extremely small value, the eNodeB waits for a period shorter than the transmission time required by a The parameter response message modification has no from the MME. If V100R005C00 impact on the this parameter is set equipment. to an extremely large value, the eNodeB continues waiting for a response message from the MME when it cannot receive the response message due to a fault. As a result, resources are wasted. To prevent this problem, you are advised to retain the default value.
Radio
None
The setting of this parameter has an impact on how long the eNodeB will wait for a response message over the X2 interface from a peer eNodeB. If this parameter is set to an extremely small value, the eNodeB waits for a period shorter than the transmission time required by a The parameter response message modification has no from the peer V100R005C00 impact on the eNodeB. If this equipment. parameter is set to an extremely large value, the eNodeB continues waiting for a response message from the peer eNodeB when it cannot receive the response message due to a fault. As a result, resources are wasted. To prevent this problem, you are advised to retain the default value.
Radio
None
The setting of this parameter has an impact on how long the eNodeB will wait for a response message from a UE. If this parameter is set to an extremely small value, the eNodeB waits for a period shorter than the transmission time required by a The parameter response message modification has no from the UE. If this V100R005C00 impact on the parameter is set to equipment. an extremely large value, the eNodeB continues waiting for a response message from the UE when it cannot receive the response message due to a fault. As a result, resources are wasted. To prevent this problem, you are advised to retain the default value.
Radio
None
V100R003C00
Radio
None
V100R003C00
Radio
None
V100R003C00
Radio
None
The parameter modification has no none impact on the equipment.
V100R004C00
Radio
None
V100R001C01
Radio
None
If SRI adaptation is enabled, the SRI V100R003C00 load in a cell is increased.
Radio
None
If this parameter is set to LCG_PROFILE_1, non-GBR services are classified into high- and lowThe parameter priority non-GBR modification has no services. QoS of V100R003C00 impact on the high-priority nonequipment. GBR services is better ensured, but there is a risk of failure to maintain QoS of low-priority non-GBR services.
Radio
None
V100R005C00
Radio
None
V100R005C00
Radio
None
V100R005C00
Radio
None
ROHC helps reduce header overhead. The parameter The reduction is modification has no especially V100R003C00 impact on the significant for equipment. services with small data packets, such as VoIP services.
Radio
None
Packet transmission The parameter reliability and the modification has no network link V100R001C01 impact on the overhead are equipment. affected.
Radio
None
The parameter The support for modification has no different protocols is V100R001C01 impact on the affected. equipment.
Radio
None
If this parameter is set to a small value, the eNodeB rejects access of the UE again for the same The parameter reason. If this modification has no parameter is set to V100R001C00 impact on the a large value, the equipment. UE cannot access the network for a long period of time, which affects user experience.
Radio
None
After T320 expires, the dedicated priorities indicated in the RRCConnectionRel ease message become invalid, and the absolute priorities indicated in the system information take effect. As the absolute priorities in the system The parameter information are modification has no optional, frequency V100R002C00 impact on the prioritization can be equipment. better guaranteed during cell reselection if the dedicated priorities are used. If the value of this parameter is too large, cell reselection parameters cannot be updated in time at the UE when priority values change.
Radio
None
If the UE does not complete an intraRAT handover before this timer The parameter expires, the UE modification has no reverts back to the impact on the associated equipment. configuration and initiates an RRC connection reestablishment procedure.
V100R001C00
Radio
None
If the UE does not complete an interRAT handover to GERAN before this The parameter timer expires, the modification has no UE reverts back to V100R001C00 impact on the the associated equipment. configuration and initiates an RRC connection reestablishment procedure.
Radio
None
After T320 expires, the dedicated priorities indicated in the RRCConnectionRel ease message become invalid, and the absolute priorities indicated in the system information take effect. As the absolute priorities in the system The parameter information are modification has no optional, frequency V100R002C00 impact on the prioritization can be equipment. better guaranteed during cell reselection if the dedicated priorities are used. If the value of this parameter is too large, cell reselection parameters cannot be updated in time at the UE when priority values change.
Radio
None
When the UE inactivity timer is turned off, the UE remains connected to the network even if it is in idle mode for a long period of time. When the timer is turned on, the radio resources for the UE are released if it is in The parameter idle mode for a modification has no duration exceeding V100R001C00 impact on the the length of this equipment. timer. If this parameter is set to a small value, the eNodeB releases the connection of a UE before the UE successfully accesses the network. To prevent this problem, you are advised to retain the default value.
Radio
None
If this parameter is set to a large value, a UE cannot enter an out-ofsynchronization state in a timely manner. As a result, the UE unnecessarily occupies PUCCH and SRS resources and the UE power consumption The parameter increases. If this modification has no parameter is set to V100R005C00 impact on the a small value, there equipment. is a probability that the UE enters an out-ofsynchronization state when it should not. As a result, the number of random access times for maintaining uplink synchronization increases and more resources for random access are used.
Radio
None
N/A
None
V100R005C00
Radio
None
V100R005C00
Radio
None
V100R005C00
Radio
None
V100R005C00
Radio
None
N/A
None
V100R002C00
Radio
None
If this switch is on, The parameter the PA is adjusted. modification has no If this switch is off, impact on the the PA is not equipment. adjusted.
V100R002C00
Radio
None
If the RS power is fixed, setting this parameter to a large value increases the power and MCS of all users in the cell, but results in power The parameter limitation. The modification has no power limitation V100R002C00 impact on the reduces the UE equipment. throughput. Setting this parameter to a small value decreases the power and MCS and reduces the cell throughput.
Radio
None
N/A
None
V100R003C00
Radio
None
V100R003C00
Radio
None
V100R003C00
Radio
None
V100R003C00
Radio
None
V100R003C00
Radio
None
V100R003C00
Radio
None
V100R003C00
Radio
None
V100R003C00
Radio
None
N/A
none
V100R001C01
Radio
None
When Ks is equal to 0, the transmit power can be adjusted according to only closed-loop TPC commands. When Ks is equal to 1.25, the transmit The parameter power can be modification has no adjusted by means V100R001C01 impact on the of selecting different equipment. MCSs during scheduling. This helps the UE to quickly adapt to changes in channel conditions and increases the cell throughput.
Radio
None
If the value of this parameter is too small, the transmit power of the SRS is too low, so that the uplink timing requirement is not met and the SINR of data channels cannot be measured accurately. Thus, The parameter the network modification has no performance V100R001C01 impact on the deteriorates. If the equipment. value of this parameter is too large, the transmit power of the SRS is excessively high, which increases the interference to other channels and neighboring cells and thus reduces the throughput of the entire network.
Radio
None
If the value of this parameter is too small, the transmit power of the SRS is too low, so that the uplink timing requirement is not met and the SINR of data channels cannot be measured accurately. Thus, The parameter the network modification has no performance V100R001C01 impact on the deteriorates. If the equipment. value of this parameter is too large, the transmit power of the SRS is excessively high, which increases the interference to other channels and neighboring cells and thus reduces the throughput of the entire network.
Radio
None
A greater value of this parameter indicates a smaller impact of the previous RSRP value on the filtered value and a greater impact of the RSRP value measured this The parameter time on the filtered modification has no value. A smaller V100R001C01 impact on the value of this equipment. parameter indicates a greater impact of the previous RSRP value on the filtered value and a smaller impact of the RSRP value measured this time on the filtered value.
Radio
None
N/A
None
V100R005C00
Radio
None
V100R005C00
Radio
None
An appropriate value of this parameter effectively reduces the probability of cross-cell handovers and The parameter therefore increases modification has no the handover V100R005C00 impact on the success rate. A equipment. smaller value of this parameter results in a higher probability of distance-based handovers. A larger value of this parameter results in the opposite effect.
Radio
None
N/A
None
V100R003C00
Radio
None
N/A
None
V100R003C00
Radio
None
DRX introduces extra delay to scheduling. Therefore, if a UE with a service whose QCI is mapped to a high requirement for the delay is allowed to enter the DRX The parameter state, the QoS modification has no satisfaction rate V100R003C00 impact on the decreases because equipment. of the increase in the delay of the service. If a UE with a service whose QCI is mapped to a low requirement for the delay is not allowed to enter the DRX state, it is not power-saving for the UE.
Radio
None
V100R003C00
Radio
None
V100R003C00
Radio
None
If this parameter is set to a small value, the UE enters Sleep Time before receiving the retransmitted data, resulting in failures to correctly receive The parameter the retransmitted modification has no data. If this V100R003C00 impact on the parameter is set to equipment. a large value, the UE keeps waiting even when retransmitted data is lost. That is, the UE stays active, which is not powersaving.
Radio
None
V100R003C00
Radio
None
V100R003C00
Radio
None
V100R003C00
Radio
None
V100R003C00
Radio
None
N/A
None
V100R003C00
Radio
None
N/A
None
V100R003C00
Radio
None
The entering condition of event A1 is as follows: Ms - Hys > Thresh. The triggering condition of event A2 is as follows: Ms + Hys < Thresh. Ms is the measurement value of the serving cell, The parameter Hys is the modification has no hysteresis for event V100R003C00 impact on the A1 or A2 contained equipment. in the measurement configuration, and Thresh is the threshold for the particular event. A larger value of Hys results in a lower probability of triggering event A1 or A2.
Radio
None
The time-to-trigger helps reduce the number of interRAT measurements and prevent unnecessary interRAT The parameter measurements. The modification has no larger the value of V100R003C00 impact on the this parameter, the equipment. smaller the average number of interRAT measurements, and the higher the probability of call drops.
Radio
None
The entering condition of event A1 is as follows: Ms - Hys > Thresh. A larger value of Thresh results in a The parameter lower probability of modification has no triggering event A1 V100R003C00 impact on the and therefore a equipment. lower probability of stopping inter-RAT measurements. A smaller value of Thresh leads to a higher probability.
Radio
None
None
None
The entering condition of event A1 is as follows: Ms - Hys > Thresh. Thresh is the threshold for this event. A larger The parameter value of Thresh modification has no results in a lower V100R003C00 impact on the probability of equipment. triggering event A1 and therefore a lower probability of stopping inter-RAT measurements. A smaller value of Thresh leads to a higher probability. The entering condition of event A2 is as follows: Ms + Hys < Thresh. Thresh is the threshold for this event. A larger The parameter value of Thresh modification has no results in a higher V100R003C00 impact on the probability of equipment. triggering event A2 and therefore a higher probability of starting inter-RAT measurements. A smaller value of Thresh leads to a lower probability. The entering condition of event A2 is as follows: Ms + Hys < Thresh. Thresh is the threshold for this event. A larger The parameter value of Thresh modification has no results in a higher V100R003C00 impact on the probability of equipment. triggering event A2 and therefore a higher probability of starting inter-RAT measurements. A smaller value of Thresh leads to a lower probability.
Radio
Radio
Radio
None
V100R005C00
Radio
None
N/A
None
V100R003C00
Radio
None
N/A
None
V100R003C00
Radio
None
The entering condition of event B1 is as follows: Mn + Ofn - Hys > Thresh. Mn is the measurement value of the neighboring cell. Ofn is the frequency-specific offset of the neighboring cell. Thresh is the threshold for event B1. Hys is the The parameter hysteresis for event modification has no B1. V100R003C00 impact on the A larger value of equipment. Hys results in a lower probability of triggering event B1 and hence causes a lower probability of handover. A large value may affect user experience. A smaller value of Hys leads to a higher probability of triggering event B1. A small value may cause handover decision errors and ping-pong
Radio
None
A larger value of this parameter results in a lower The parameter probability of modification has no handover to the V100R003C00 impact on the CDMA2000 1xRTT equipment. cell, and a smaller value leads to a higher probability.
Radio
None
Radio
None
Radio
None
N/A
None
V100R003C00
Radio
None
N/A
None
V100R003C00
Radio
None
V100R003C00
Radio
None
V100R003C00
Radio
None
V100R003C00
Radio
None
V100R003C00
Radio
None
V100R003C00
Radio
None
V100R003C00
Radio
None
V100R003C00
Radio
None
V100R003C00
Radio
None
N/A
None
V100R003C00
Radio
None
N/A
None
V100R003C00
Radio
None
V100R003C00
Radio
None
V100R003C00
Radio
None
V100R003C00
Radio
None
V100R003C00
Radio
None
V100R003C00
Radio
None
V100R003C00
Radio
None
V100R003C00
Radio
None
V100R003C00
Radio
None
A larger value of this parameter results in a longer average SRI period for UEs in a cell and a larger capacity of SRI users in the The parameter cell, but it also lead modification has no to a longer average V100R003C00 impact on the delay of uplink equipment. scheduling for UEs in the cell. A smaller value of this parameter results in a smaller capacity of SRI users in a cell.
Radio
None
N/A
None
V100R003C00
Radio
None
N/A
None
V100R003C00
Radio
None
The entering condition of event B1 is as follows: Mn + Ofn - Hys > Thresh. Mn is the measurement value of the neighboring cell. Ofn is the frequency-specific offset of the neighboring cell. Thresh is the threshold for this event. Hys is the The parameter hysteresis for this modification has no event, which is used V100R003C00 impact on the to prevent frequent equipment. triggering of event evaluation caused by radio signal fluctuation or fading. A larger value of Hys results in a lower probability of triggering event B1 and hence causes a lower probability of handover. A large value may affect user experience. A smaller value of Hys leads to a higher probability of
Radio
None
A larger value of this parameter results in a lower The parameter probability of modification has no handover to the impact on the CDMA2000 HRPD equipment. cell, and a smaller value leads to a higher probability.
V100R003C00
Radio
None
V100R003C00
Radio
None
V100R003C00
Radio
None
N/A
None
V100R003C00
Radio
None
N/A
None
V100R003C00
Radio
None
The entering condition of event B1 is as follows: Mn + Ofn - Hys > Thresh. Mn is the measurement value of the neighboring cell. Ofn is the frequency-specific offset of the neighboring cell. Thresh is the threshold for event B1. Hys is the The parameter hysteresis for event modification has no B1. V100R003C00 impact on the A larger value of equipment. Hys results in a lower probability of triggering event B1 and therefore a lower probability of handover. A large value may affect user experience. A smaller value of Hys leads to a higher probability of triggering event B1. A small value may cause handover decision errors and ping-pong
Radio
None
A larger value of this parameter results in a lower The parameter probability of modification has no handover to the V100R003C00 impact on the GERAN cell, and a equipment. smaller value leads to a higher probability.
Radio
None
Radio
None
Radio
None
N/A
None
V100R002C00
Radio
None
N/A
None
V100R003C00
Radio
None
A larger value of this parameter results in a lower The parameter probability of modification has no handover to the V100R003C00 impact on the UTRAN cell, and a equipment. smaller value leads to a higher probability.
Radio
None
Radio
None
The entering condition of event B1 is as follows: Mn + Ofn - Hys > Thresh. Mn is the measurement value of the neighboring cell. Ofn is the frequency-specific offset of the neighboring cell. Thresh is the threshold for event B1. Hys is the The parameter hysteresis for event modification has no B1. V100R003C00 impact on the A larger value of equipment. Hys results in a lower probability of triggering event B1 and therefore a lower probability of handover. A large value may affect user experience. A smaller value of Hys leads to a higher probability of triggering event B1. A small value may cause handover decision errors and ping-pong
Radio
None
Radio
None
Radio
None
Radio
None
N/A
None
V100R003C00
Radio
None
N/A
None
V100R003C00
Radio
None
The triggering condition of event A1 is as follows: Ms - Hys > Thresh. The triggering condition of event A2 is as follows: Ms + Hys < Thresh. Ms is the measurement value The parameter of the serving cell, modification has no Hys is the V100R003C00 impact on the hysteresis for event equipment. A1 or A2 contained in the measurement configuration, and Thresh is the threshold for the particular event. A larger value of Hys results in a lower probability of triggering event A1 or A2.
Radio
None
The time-to-trigger helps reduce the number of interfrequency measurements and prevent unnecessary interThe parameter frequency modification has no measurements. The V100R003C00 impact on the larger the value of equipment. this parameter, the smaller the average number of interfrequency measurements, and the higher the probability of call drops.
Radio
None
The entering condition of event A1 is as follows: Ms - Hys > Thresh. Thresh is the threshold for the event. A larger value of Thresh The parameter results in a lower modification has no probability of V100R003C00 impact on the triggering event A1 equipment. and hence causes a lower probability of stopping interfrequency measurements. A smaller value of Thresh leads to a higher probability.
Radio
None
The entering condition of event A1 is as follows: Ms - Hys > Thresh. Thresh is the threshold for the event. A larger value of Thresh The parameter results in a lower modification has no probability of V100R003C00 impact on the triggering event A1 equipment. and hence causes a lower probability of stopping interfrequency measurements. A smaller value of Thresh leads to a higher probability. The entering condition of event A2 is as follows: Ms + Hys < Thresh. Thresh is the threshold for the event. A smaller value of Thresh The parameter results in a lower modification has no probability of V100R003C00 impact on the triggering event A2 equipment. and hence causes a lower probability of starting interfrequency measurements. A larger value of Thresh leads to a higher probability.
Radio
None
Radio
None
The entering condition of event A2 is as follows: Ms + Hys < Thresh. Thresh is the threshold for the event. A smaller value of Thresh The parameter results in a lower modification has no probability of V100R003C00 impact on the triggering event A2 equipment. and hence causes a lower probability of starting interfrequency measurements. A larger value of Thresh leads to a higher probability. A larger value of this parameter results in a lower probability of triggering event A4 and hence causes a lower probability of handover. A large The parameter value may affect modification has no user experience. A V100R003C00 impact on the smaller value of this equipment. parameter leads to a higher probability of triggering event A4. A small value may cause handover decision errors and pingpong handovers.
Radio
None
Radio
None
A larger value of this parameter results in a lower probability of triggering event A4 and hence causes a lower probability of handover. A large The parameter value may affect modification has no user experience. A V100R003C00 impact on the smaller value of this equipment. parameter leads to a higher probability of triggering event A4. A small value may cause handover decision errors and pingpong handovers. A larger value of this parameter results in a lower probability of triggering event A4 and hence causes a lower probability of handover. A large The parameter value may affect modification has no user experience. A V100R003C00 impact on the smaller value of this equipment. parameter leads to a higher probability of triggering event A4. A small value may cause handover decision errors and pingpong handovers.
Radio
None
Radio
None
A larger value of this parameter results in a lower probability of handover to an interThe parameter frequency cell, a modification has no smaller average V100R003C00 impact on the number of equipment. handovers, and a higher call drop rate. A smaller value of this parameter leads to the opposite effect.
Radio
None
A larger value of this parameter results in a lower probability of triggering event A4 and hence causes a lower probability of handover. A large The parameter value may affect modification has no user experience. A V100R003C00 impact on the smaller value of this equipment. parameter leads to a higher probability of triggering event A4. A small value may cause handover decision errors and pingpong handovers.
Radio
None
Radio
None
V100R003C00
Radio
None
V100R003C00
Radio
None
A larger value of this parameter results in a lower probability of triggering event A3 and therefore a The parameter lower probability of modification has no handover. A smaller V100R003C00 impact on the value of this equipment. parameter leads to a higher probability of triggering event A3 and therefore a higher probability of handover.
Radio
None
The entering condition of event A1 is as follows: Ms - Hys > Thresh. Thresh is the threshold for the event. A large value The parameter of Thresh results in modification has no a low probability of V100R003C00 impact on the triggering event A1 equipment. and hence causes a low probability of stopping interfrequency measurements. A small value of Thresh leads to a high probability. The entering condition of event A2 is as follows: Ms + Hys < Thresh. Thresh is the threshold for the event. A small value The parameter of Thresh results in modification has no a low probability of V100R003C00 impact on the triggering event A2 equipment. and hence causes a low probability of starting interfrequency measurements. A large value of Thresh leads to a high probability.
Radio
None
Radio
None
V100R005C00
Radio
None
V100R005C00
Radio
None
N/A
None
V100R003C00
Radio
None
N/A
None
V100R003C00
Radio
None
Radio
None
A positive value of this parameter results in a relatively low probability of triggering event A3 and therefore a relatively low The parameter probability of modification has no handover. A V100R003C00 impact on the negative value of equipment. this parameter leads to a relatively high probability of triggering event A3 and therefore a relatively high probability of handover.
Radio
None
This parameter helps reduce the average number of handovers and the number of unexpected handovers, and The parameter hence prevents modification has no unnecessary V100R003C00 impact on the handovers. A larger equipment. value of this parameter results in a smaller average number of handovers, but it also leads to a higher risk of call drops.
Radio
None
N/A
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R003C00
Radio
None
V100R003C00
Radio
None
N/A
None
V100R005C00
Radio
None
V100R005C00
Radio
None
N/A
None
V100R003C00
Radio
None
None
V100R003C00
Radio
None
None
V100R003C00
Radio
None
N/A
None
V100R003C00
Radio
None
V100R003C00
Radio
None
V100R003C00
Radio
None
V100R003C00
Radio
None
V100R003C00
Radio
None
V100R003C00
Radio
None
N/A
None
V100R003C00
Radio
None
V100R003C00
Radio
None
V100R003C00
Radio
None
V100R003C00
Radio
None
N/A
None
V100R001C00
Radio
None
The link should be reestablished after the parameter modification.
None
V100R005C00
Radio
None
None
V100R002C00
Radio
None
None
V100R003C00
Radio
None
V100R003C00
Radio
None
N/A
None
V100R001C00
Radio
None
N/A
None
V100R005C00
Radio
None
N/A
None
V100R003C00
Radio
None
N/A
None
V100R001C01
Radio
None
N/A
None
V100R003C00
Radio
None
N/A
None
V100R001C01
Radio
None
N/A
None
V100R001C01
Radio
None
N/A
None
V100R003C00
Radio
None
N/A
None
V100R001C01
Radio
None
N/A
None
V100R005C00
Radio
None
V100R005C00
Radio
None
N/A
None
V100R004C00
Radio
None
N/A
None
V100R004C00
Radio
None
N/A
None
V100R004C00
Radio
None
V100R004C00
Radio
None
N/A
None
V100R001C00
Radio
None
The link should be reestablished after the parameter modification. The link should be reestablished after the parameter modification. The link should be reestablished after the parameter modification.
None
V100R005C00
Radio
None
None
V100R002C00
Radio
None
None
V100R003C00
Radio
None
This parameter has an impact on The parameter automatic removal modification has no of the X2 interface V100R001C01 impact on the in a situation where equipment. the peer eNodeB is removed.
Radio
None
N/A
None
V100R003C00
Radio
None
N/A
None
V100R003C00
Radio
None
N/A
None
V100R001C00
Radio
None
N/A
None
V100R004C00
Radio
None
If this parameter is set to ON, the UE may enter the DRX The parameter state, saving UE modification has no power. If this V100R001C01 impact on the parameter is set to equipment. OFF, the UE consumes relatively much power. The parameter modification has no impact on the equipment. This parameter has little impact on the radio network V100R001C01 performance. Short DRX cycles reduce the traffic delay.
Radio
None
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R005C00
Radio
None
N/A
None
V100R002C00
Radio
None
IMS signaling and low-delay services are prioritized during scheduling but consume many resources to ensure The parameter their QoS. modification has no Therefore, it is V100R002C00 impact on the recommended that equipment. this parameter not be set to IMSSignalling or LowDelay for TCP services and nonreal-time streaming services. This parameter has an impact on the The parameter throughput and the modification has no QoS differentiation V100R001C00 impact on the service. Its value is equipment. subject to the operator's policy. This parameter has an impact on the The parameter throughput and the modification has no QoS differentiation V100R001C00 impact on the service. Its value is equipment. subject to the operator's policy.
Radio
None
Radio
None
Radio
None
If this parameter is set to a large value, the Min_GBR (minimum guaranteed bit rate) of high-priority nonGBR services can be guaranteed but the Min_GBR of lowpriority non-GBR The parameter services cannot be modification has no guaranteed when V100R002C00 impact on the resources are equipment. insufficient. If this parameter is set to a small value, there is an impact on the response time of non-GBR services when resources are insufficient and there are higherpriority services. If this parameter is set to a large value, the Min_GBR (minimum guaranteed bit rate) of high-priority nonGBR services can be guaranteed but the Min_GBR of lowpriority non-GBR The parameter services cannot be modification has no guaranteed when V100R002C00 impact on the resources are equipment. insufficient. If this parameter is set to a small value, there is an impact on the response time of non-GBR services when resources are insufficient and there are higherpriority services.
Radio
None
Radio
None
This parameter affects the preallocation probability of its The parameter corresponding type modification has no of service and V100R002C00 impact on the therefore affects the equipment. service delay. The delay has a negative correlation with the preallocation weight.
Radio
None
V100R003C00
Radio
None
If this parameter is set to PBR_0_KBps, there is a risk that the corresponding services will never be scheduled. If this The parameter parameter is set to modification has no PBR_INFINITY and V100R003C00 impact on the the corresponding equipment. traffic volume is high, there is a risk that the services with QCIs indicating lower priorities than this QCI will never be scheduled.
Radio
None
Services with The parameter relatively high modification has no priorities are impact on the scheduled equipment. preferentially.
V100R005C00
Radio
None
V100R003C00
Radio
None
V100R003C00
Radio
None
V100R005C00
Radio
None
N/A
None
V100R003C00
Radio
None
If this parameter is set to The parameter REDIRECTION for modification has no a bearer with a QCI V100R003C00 impact on the of 1, call drop equipment. occurs during a redirection.
Radio
None
V100R003C00
Radio
None
If this parameter is set to The parameter REDIRECTION for modification has no a bearer with a QCI V100R003C00 impact on the of 1, call drop equipment. occurs during a redirection.
Radio
None
V100R003C00
Radio
None
V100R003C00
Radio
None
V100R003C00
Radio
None
V100R003C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
N/A
None
V100R003C00
Radio
None
A large value of this parameter results in a long delay of services and a failure to meet the The parameter QCI requirement. A modification has no small value of this V100R003C00 impact on the parameter leads to equipment. a severe case of PDCP data discarding and therefore low throughput.
Radio
None
V100R003C00
Radio
None
A larger value of this parameter leads to a higher interference resistance capability, but a larger number of retransmissions results in a longer delay and lower throughput. Set this parameter to a small value for services with a high requirement for the The parameter delay and to a large modification has no value for services V100R003C00 impact on the with a low equipment. requirement for the delay. RRC connection reestablishment has a great impact on Acknowledged Mode (AM) services, such as packet-losssensitive and delayinsensitive TCP services, because packets in the buffer are discarded upon the reestablishment.
Radio
None
A larger value of this parameter leads to a higher interference resistance capability, but a larger number of retransmissions results in a longer delay and lower throughput. Set this parameter to a small value for services with a high requirement for the The parameter delay and to a large modification has no value for services V100R003C00 impact on the with a low equipment. requirement for the delay. RRC connection reestablishment has a great impact on Acknowledged Mode (AM) services, such as packet-losssensitive and delayinsensitive TCP services, because packets in the buffer are discarded upon the reestablishment.
Radio
None
To prevent buffer overflow caused by an excessively long queue, the transmitter sends status reports based on the data volume of The parameter transmitted PDUs. modification has no A small value of this V100R003C00 impact on the parameter results in equipment. a low frequency of sending polling PDUs. A large value leads to high buffer occupancy and a slow speed of send window movement.
Radio
None
To prevent buffer overflow caused by an excessively long queue, the transmitter sends status reports based on the data volume of The parameter transmitted PDUs. modification has no A small value of this V100R003C00 impact on the parameter results in equipment. a low frequency of sending polling PDUs. A large value leads to high buffer occupancy and a slow speed of send window movement.
Radio
None
To prevent the send window from changing to 0, the transmitter initiates status reporting based on the number of PDUs. A small value (smaller than or equal to PollPdu_p16) of this parameter results in a high frequency of sending polling PDUs, a short The parameter round-trip time for modification has no RLC packets, and a V100R003C00 impact on the high speed of send equipment. window movement. If the send window is not 0, however, a small value does not increase the transmission speed; instead, it leads to an excessive number of status reports. A large value of this parameter results in a low speed of send window movement.
Radio
None
To prevent the send window from changing to 0, the transmitter initiates status reporting based on the number of PDUs. A small value (smaller than or equal to PollPdu_p16) of this parameter results in a high frequency of sending polling PDUs, a short The parameter round-trip time for modification has no RLC packets, and a V100R003C00 impact on the high speed of send equipment. window movement. If the send window is not 0, however, a small value does not increase the transmission speed; instead, it leads to an excessive number of status reports. A large value of this parameter results in a low speed of send window movement.
Radio
None
If this parameter is set to a small value, too many polling PDUs are sent. In addition, the number of ARQ retransmissions reaches its The parameter maximum due to modification has no consecutive PDU V100R003C00 impact on the retransmissions, equipment. and therefore the RRC connection is re-established. If this parameter is set to a large value, status reports cannot be sent in time.
Radio
None
If this parameter is set to a small value, too many polling PDUs are sent. In addition, the number of ARQ retransmissions reaches its The parameter maximum due to modification has no consecutive PDU V100R003C00 impact on the retransmissions, equipment. and therefore the RRC connection is re-established. If this parameter is set to a large value, status reports cannot be sent in time.
Radio
None
This parameter has an impact on status reporting in AM. A low frequency of status reporting leads to a low frequency of status report scheduling but a high probability that the send window changes to 0 at the transmitter, thereby reducing the transmission rate. A The parameter high frequency of modification has no status reporting V100R003C00 impact on the leads to a high equipment. probability of timely acknowledgment to data in the send window and therefore a high probability of rate guarantee. However, a high frequency of status reporting results in a high probability of status report scheduling and repeated transmissions, thereby wasting
Radio
None
This parameter has an impact on status reporting in AM. A low frequency of status reporting leads to a low frequency of status report scheduling but a high probability that the send window changes to 0 at the transmitter, thereby reducing the transmission rate. A The parameter high frequency of modification has no status reporting V100R003C00 impact on the leads to a high equipment. probability of timely acknowledgment to data in the send window and therefore a high probability of rate guarantee. However, a high frequency of status reporting results in a high probability of status report scheduling and repeated transmissions, thereby wasting
Radio
None
A small value of this parameter results in useless HARQ retransmissions from the transmitter and repeated status reports from the receiver, thereby wasting resources. A large value of this The parameter parameter leads to modification has no a long delay for the V100R003C00 impact on the receiver to equipment. determine an out-oforder packet transmission failure and therefore a long delay for sending status reports, thereby delaying services and reducing the throughput.
Radio
None
A small value of this parameter results in useless HARQ retransmissions from the transmitter and repeated status reports from the receiver, thereby wasting resources. A large value of this The parameter parameter leads to modification has no a long delay for the V100R003C00 impact on the receiver to equipment. determine an out-oforder packet transmission failure and therefore a long delay for sending status reports, thereby delaying services and reducing the throughput.
Radio
None
The PDCP sequence number size must be large enough to prevent Hyper Frame Number (HFN) The parameter mismatch caused modification has no by loss of a large V100R003C00 impact on the number of packets. equipment. However, a longer PDCP sequence number results in more PDCP header overhead and lower payload throughput.
Radio
None
The sequence number size specified by this parameter must be large enough to The parameter prevent sequence modification has no number ambiguity impact on the caused by HARQ equipment. retransmissions. However, a large size results in a heavy RLC header load. The sequence number size specified by this parameter must be large enough to The parameter prevent sequence modification has no number ambiguity impact on the caused by HARQ equipment. retransmissions. However, a large size results in a heavy RLC header load.
V100R003C00
Radio
None
V100R003C00
Radio
None
A small value of this parameter results in useless HARQ retransmissions from the transmitter and a large number of lost packets. A The parameter large value of this modification has no parameter leads to V100R003C00 impact on the a long delay for the equipment. receiver to determine an out-oforder packet transmission failure, thereby delaying services and reducing the throughput.
Radio
None
A small value of this parameter results in useless HARQ retransmissions from the transmitter and a large number of lost packets. A The parameter large value of this modification has no parameter leads to V100R003C00 impact on the a long delay for the equipment. receiver to determine an out-oforder packet transmission failure, thereby delaying services and reducing the throughput.
Radio
None
If this parameter is set to FALSE, the target eNodeB will transmit all data The parameter forwarded by the modification has no source eNodeB. V100R003C00 impact on the Part of the data may equipment. already be transmitted to UEs, thereby wasting resources on the air interface.
Radio
None
N/A
None
V100R003C00
Radio
None
This parameter has an impact on the The parameter throughput and the modification has no QoS differentiation V100R003C00 impact on the service. Its value is equipment. subject to the operator's policy. This parameter has an impact on the The parameter throughput and the modification has no QoS differentiation V100R003C00 impact on the service. Its value is equipment. subject to the operator's policy.
Radio
None
Radio
None
If this parameter is set to a large value, the Min_GBR (minimum guaranteed bit rate) of high-priority nonGBR services can be guaranteed but the Min_GBR of lowpriority non-GBR The parameter services cannot be modification has no guaranteed when V100R003C00 impact on the resources are equipment. insufficient. If this parameter is set to a small value, there is an impact on the response time of non-GBR services when resources are insufficient and there are higherpriority services. If this parameter is set to a large value, the Min_GBR (minimum guaranteed bit rate) of high-priority nonGBR services can be guaranteed but the Min_GBR of lowpriority non-GBR The parameter services cannot be modification has no guaranteed when V100R003C00 impact on the resources are equipment. insufficient. If this parameter is set to a small value, there is an impact on the response time of non-GBR services when resources are insufficient and there are higherpriority services.
Radio
None
Radio
None
This parameter affects the preallocation probability of its The parameter corresponding type modification has no of service and V100R003C00 impact on the therefore affects the equipment. service delay. The delay has a negative correlation with the preallocation weight.
Radio
None
V100R003C00
Radio
None
V100R003C00
Radio
None
If this parameter is set to PBR_0_KBps, there is a risk that the corresponding services will never be scheduled. If this The parameter parameter is set to modification has no PBR_INFINITY and V100R003C00 impact on the the corresponding equipment. traffic volume is high, there is a risk that the services with QCIs indicating lower priorities than this QCI will never be scheduled.
Radio
None
Services with The parameter relatively high modification has no priorities are impact on the preferentially equipment. scheduled.
V100R003C00
Radio
None
V100R005C00
Radio
None
This parameter and other associated factors have an impact on the CQI reporting mode and The parameter reporting modification has no parameters, and V100R003C00 impact on the therefore affect the equipment. feedback overhead in the uplink and throughput or coverage in the downlink.
Radio
None
The setting of this parameter determines the transmission modes The parameter that apply to UEs modification has no served by a multiV100R003C00 impact on the antenna eNodeB equipment. and therefore affects performance such as the throughput and coverage.
Radio
None
Radio
None
The setting of this parameter determines the The parameter configuration of the modification has no CQI reporting V100R005C00 impact on the period, affecting the equipment. UE throughput and number of UEs supported by a cell.
Radio
None
When CqiPeriodAdaptive is set to OFF, the setting of this parameter determines the CQI The parameter period. A smaller modification has no value of this V100R005C00 impact on the parameter results in equipment. high UE throughput but fewer UEs that can participate in CQI reporting. A larger value of this parameter results in the opposite effect.
Radio
None
Radio
None
Radio
None
This parameter affects the configuration of The parameter SRS periods for modification has no UEs and therefore V100R005C00 impact on the affects the UE equipment. throughput and number of UEs supported by a cell. When SrsPeriodAdaptive is set to OFF, the setting of this parameter determines the SRS The parameter period. A smaller modification has no value of this V100R005C00 impact on the parameter results in equipment. fewer UEs that can participate in SRS reporting. A larger value of this parameter results in the opposite effect.
Radio
None
Radio
None
N/A
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
A decrease in the value of this parameter indicates a decrease in the number of candidate cells for each handover. In The parameter this case, the modification has no success rate of the V100R001C00 impact on the handover triggered equipment. by each measurement report is decreased, but the required amount of radio interface resource is reduced.
Radio
None
When the value is increased, the number of reports increases and the handover success The parameter rate rises. An modification has no excessively large V100R001C00 impact on the number of reports, equipment. however, results in excessive signaling and hence causes a waste of radio interface resources.
Radio
None
A smaller value of this parameter results in a larger number of reports and greater consumption of radio interface resources. A larger value of this The parameter parameter leads to modification has no a longer delay of V100R001C00 impact on the handover retries equipment. and hence a lower handover success rate. In the early stage of LTE deployment, this parameter should be set to a small value to ensure timely handovers.
Radio
None
V100R001C00
Radio
None
A smaller value of this parameter results in a larger number of reports, greater consumption of radio interface The parameter resources and a modification has no higher handover impact on the success rate. A equipment. larger value of this parameter leads to a longer delay of handover retries and thus a lower handover success rate.
V100R001C00
Radio
None
V100R001C00
Radio
None
Radio
None
V100R001C00
Radio
None
Radio
None
V100R001C00
Radio
None
V100R005C00
Radio
None
A decrease in the value of this parameter indicates a decrease in the number of candidate cells for each handover. In The parameter this case, the modification has no success rate of the V100R001C00 impact on the handover triggered equipment. by each measurement report is decreased, but the required amount of radio interface resource is reduced.
Radio
None
When the value is increased, the number of reports increases and the handover success The parameter rate rises. An modification has no excessively large V100R001C00 impact on the number of reports, equipment. however, results in excessive signaling and hence causes a waste of radio interface resources.
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
A smaller value of this parameter results in a larger number of reports, greater consumption of radio interface The parameter resources and a modification has no higher handover impact on the success rate. A equipment. larger value of this parameter leads to a longer delay of handover retries and therefore a lower handover success rate.
V100R001C00
Radio
None
If this parameter is set to BOTH, both measured RSRP and RSRQ values are reported. In this situation, a handover is triggered only when both the measured values meet the corresponding conditions, The parameter preventing modification has no unnecessary V100R001C00 impact on the handovers. equipment. If this parameter is set to SAME_AS_TRIG_ QUAN, the measurement quantity included in the measurement report for event A4 is the same as the quantity used in the evaluation for the related event A2.
Radio
None
A smaller value of this parameter results in a larger number of reports, greater consumption of radio interface The parameter resources and a modification has no higher handover impact on the success rate. A equipment. larger value of this parameter leads to a longer delay of handover retries and thus a lower handover success rate.
V100R001C00
Radio
None
If this parameter is set to BOTH, the eNodeB sends UEs two measurement configurations for events A1 and A2: one based on RSRP, and the The parameter other based on modification has no RSRQ. When the V100R001C00 impact on the triggering condition equipment. specified by either configuration for event A1 or A2 is fulfilled, the corresponding event is reported and inter-frequency measurements are stopped or started.
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
N/A
None
V100R002C00
Radio
None
A larger value of this parameter results in a lower The parameter probability of modification has no handover to the impact on the UTRAN cell, and a equipment. smaller value results in a higher probability.
V100R002C00
Radio
None
A larger value of this parameter results in a lower The parameter probability of modification has no handover to the V100R002C00 impact on the GERAN cell, and a equipment. smaller value results in a higher probability.
Radio
None
A larger value of this parameter results in a lower The parameter probability of modification has no handover to impact on the CDMA2000, and a equipment. smaller value results in a higher probability.
V100R002C00
Radio
None
A larger value of this parameter results in a lower The parameter probability of modification has no handover to impact on the UTRAN, and a equipment. smaller value results in a higher probability.
V100R002C00
Radio
None
A larger value of this parameter results in a lower The parameter probability of modification has no handover to impact on the UTRAN, and a equipment. smaller value results in a higher probability.
V100R001C00
Radio
None
A larger value of this parameter results in a lower The parameter probability of modification has no handover to the V100R002C00 impact on the GERAN cell, and a equipment. smaller value results in a higher probability.
Radio
None
A larger value of this parameter results in a lower The parameter probability of modification has no handover to impact on the CDMA2000, and a equipment. smaller value results in a higher probability.
V100R002C00
Radio
None
N/A
None
V100R001C00
Radio
None
If AcBarringForMoDat aCfgInd or AcBarringForMoSig CfgInd in SIB2 is set to CFG, the UE draws a random number 'rand' that is uniformly distributed in the range [0,1). If rand is smaller than the value of AcBarringFactorFor Call or AcBarringFactorFor The parameter Sig, the UE modification has no considers access to V100R001C01 impact on the the cell as allowed. equipment. That is, the RRC connection can be set up for the mobile-originated call or signaling. If AcBarringFactorFor Call or AcBarringFactorFor Sig is set to a large value, the probability of allowing access to the cell is high, which may lead to a high cell load. If AcBarringFactorFor
Radio
None
V100R001C00
Radio
None
V100R001C01
Radio
None
If AcBarringForMoDat aCfgInd in SIB2 is set to CFG, the UE draws a random number 'rand' that is uniformly distributed in the range [0,1). If rand is smaller than the value of this parameter, the UE considers access to the cell as allowed. That is, an RRC connection can be The parameter set up for the modification has no mobile-originated V100R001C00 impact on the call. If this equipment. parameter is set to a large value, the probability of allowing access to the cell is high, which may lead to a high cell load. If this parameter is set to a small value, the probability of allowing access to the cell is low, in which situation UEs may fail to access the cell even when the cell load is
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C01
Radio
None
If AcBarringForMoDat aCfgInd or AcBarringForMoSig CfgInd in SIB2 is set to CFG, the UE draws a random number 'rand' that is uniformly distributed in the range [0,1). If rand is smaller than the value of this parameter, the UE considers access to the cell as allowed. The parameter That is, the RRC modification has no connection can be V100R001C00 impact on the set up for the equipment. signaling. If this parameter is set to a large value, the probability of allowing access to the cell is high, which may lead to a high cell load. If this parameter is set to a small value, the probability of allowing access to the cell is low, in which situation UEs may fail to access the cell even when
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
N/A
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
N/A
None
V100R001C00
Radio
None
N/A
None
V100R001C00
Radio
None
None
V100R001C00
Radio
None
None
V100R001C00
Radio
None
None
V100R001C00
Radio
None
N/A
None
V100R005C00
Radio
None
N/A
None
V100R001C00
Radio
None
With other cell reselection parameters unchanged, a larger value of this parameter indicates a lower probability of reselection to an The parameter intra-frequency or modification has no same-priority V100R001C00 impact on the neighboring cell, equipment. leading to an increased service drop rate. A smaller value of this parameter indicates a higher probability, leading to a larger number of pingpong cell reselections.
Radio
None
V100R001C00
Radio
None
A larger value of this parameter leads to a lower probability of the UE entering the highThe parameter mobility or mediummodification has no mobility state and a V100R001C00 impact on the smaller impact of equipment. the mobility status on cell reselection. A smaller value of this parameter leads to the opposite effect.
Radio
None
A larger value of this parameter leads to a lower probability of the UE entering the normal The parameter mobility state, a modification has no lower probability of V100R001C00 impact on the adjustment of equipment. reselection-related parameters, and a smaller impact of UE speed variation on cell reselection.
Radio
None
A larger value of this parameter indicates a lower probability of a UE entering the medium mobility state. In this case, The parameter the reselectionmodification has no related parameters V100R001C00 impact on the are not adjusted equipment. and cell reselections are more difficult to trigger. A smaller value of this parameter leads to the opposite effect.
Radio
None
A larger value of this parameter indicates a lower probability of a UE entering the high mobility state. In The parameter this case, modification has no reselection-related V100R001C00 impact on the parameters are not equipment. adjusted and cell reselections are more difficult to trigger. A smaller value of this parameter leads to the opposite effect.
Radio
None
A smaller value of this parameter results in a greater impact of the UE The parameter mobility state on the modification has no hysteresis for cell V100R001C00 impact on the reselection, that is, equipment. results in a higher probability of cell reselection. A larger value leads to a smaller impact.
Radio
None
A smaller value of this parameter results in a greater impact of the UE The parameter mobility state on the modification has no hysteresis for cell V100R001C00 impact on the reselection, that is, equipment. results in a higher probability of cell reselection. A larger value leads to a smaller impact.
Radio
None
V100R001C00
Radio
None
With other conditions unchanged, a larger value of this parameter leads to The parameter a higher probability modification has no of triggering interV100R001C00 impact on the frequency or interequipment. RAT measurements, and a smaller value indicates a lower probability.
Radio
None
A smaller value of this parameter The parameter indicates a lower modification has no frequency of the V100R001C00 impact on the reselection to a low equipment. priority interfrequency/inter-RAT cell.
Radio
None
A larger value of this parameter indicates a higher probability of a UE The parameter camping on the modification has no cells assigned with V100R001C00 impact on the the same frequency equipment. as the serving one, and a smaller value indicates a lower probability.
Radio
None
The greater the parameter, the more difficult for the cell to meet the S criterion, the more difficult for the cell to become Suitable Cell. The difficulty level of the cell selection is increased. The The parameter smaller the modification has no parameter, the V100R001C00 impact on the easier for the cell to equipment. meet the S criterion, the easier for the cell to become Suitable Cell. The difficulty level of the cell selection is decreased. The selected cell should provide the signal quality for the basic services.
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
With other conditions unchanged, a larger value of this The parameter parameter indicates modification has no a higher probability V100R001C00 impact on the of triggering intraequipment. frequency measurements, and a smaller value indicates a lower probability.
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
When this value is increased, the selection of the intraThe parameter frequency cell modification has no becomes more V100R001C00 impact on the difficult. When the equipment. value is decreased, the selection becomes easier.
Radio
None
V100R001C00
Radio
None
A smaller value of this parameter results in a greater impact of the UE The parameter mobility state on the modification has no cell reselection V100R001C00 impact on the duration within Eequipment. UTRAN, that is, results in a shorter duration. A larger value leads to a smaller impact.
Radio
None
A smaller value of this parameter results in a greater impact of the UE mobility state on the The parameter actual value of the modification has no timer for cell V100R001C00 impact on the reselection within Eequipment. UTRAN, that is, results in a higher probability of cell reselection. A larger value leads to a smaller impact.
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
With other conditions unchanged, a larger value of this The parameter parameter indicates modification has no a higher probability V100R004C00 impact on the of triggering intraequipment. frequency measurements, and a smaller value indicates a lower probability.
Radio
None
With other conditions unchanged, a larger value of this parameter leads to The parameter a higher probability modification has no of triggering interV100R004C00 impact on the frequency or interequipment. RAT measurements, and a smaller value indicates a lower probability.
Radio
None
V100R004C00
Radio
None
With other conditions unchanged, a smaller value of this parameter leads to The parameter a lower probability modification has no of reselection to an V100R004C00 impact on the inter-frequency or equipment. inter-RAT cell on lower-priority frequencies, and a larger value of this parameter leads to a higher probability.
Radio
None
V100R004C00
Radio
None
With other conditions unchanged, a smaller parameter value for a cell leads to lower probabilities of the cell meeting criteria S and becoming a The parameter suitable cell for modification has no selection, and a V100R004C00 impact on the larger parameter equipment. value for a cell leads to higher probabilities. Set this parameter properly so that the selected cell can provide signals that meet the quality requirement of basic services.
Radio
None
N/A
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
When other conditions remain unchanged, an increase in the value of this The parameter parameter results in modification has no a decrease in the V100R001C00 impact on the probability of equipment. reselection to the neighboring cell, and a decrease in the value results in an increase in the probability.
Radio
None
V100R001C00
Radio
None
A smaller value of this parameter results in a greater impact of the UE The parameter mobility state on the modification has no duration of cell V100R001C00 impact on the reselection to equipment. CDMA2000 HRPD, that is, results in a shorter duration. A larger value leads to a smaller impact.
Radio
None
A smaller value of this parameter results in a greater impact of the UE The parameter mobility state on the modification has no duration of cell V100R001C00 impact on the reselection to equipment. CDMA2000 HRPD, that is, results in a shorter duration. A larger value leads to a smaller impact.
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R005C00
Radio
None
V100R005C00
Radio
None
V100R005C00
Radio
None
V100R005C00
Radio
None
V100R005C00
Radio
None
V100R005C00
Radio
None
V100R005C00
Radio
None
V100R005C00
Radio
None
V100R005C00
Radio
None
V100R005C00
Radio
None
V100R005C00
Radio
None
V100R005C00
Radio
None
N/A
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
A smaller value of this parameter results in a greater impact of the UE The parameter mobility state on the modification has no duration of cell V100R001C00 impact on the reselection to equipment. GERAN, that is, results in a shorter duration. A larger value leads to a smaller impact.
Radio
None
A smaller value of this parameter results in a greater impact of the UE The parameter mobility state on the modification has no duration of cell V100R001C00 impact on the reselection to equipment. GERAN, that is, results in a shorter duration. A larger value leads to a smaller impact.
Radio
None
N/A
None
V100R001C00
Radio
None
When other conditions remain unchanged, an increase in the value of this The parameter parameter results in modification has no a decrease in the V100R001C00 impact on the probability of equipment. reselection to the neighboring cell, and a decrease in the value results in an increase in the probability.
Radio
None
V100R001C00
Radio
None
A smaller value of this parameter results in a greater impact of the UE The parameter mobility state on the modification has no duration of cell V100R001C00 impact on the reselection to equipment. UTRAN, that is, a shorter duration. A larger value leads to a smaller impact.
Radio
None
A smaller value of this parameter results in a greater impact of the UE The parameter mobility state on the modification has no duration of cell V100R001C00 impact on the reselection to equipment. UTRAN, that is, a shorter duration. A larger value leads to a smaller impact.
Radio
None
N/A
None
V100R001C00
Radio
None
A larger value of this parameter leads to a lower probability of the cell meeting criteria S and becoming a suitable cell for cell The parameter selection. A smaller modification has no value of this V100R001C00 impact on the parameter results in equipment. a higher probability. Set this parameter properly so that the selected cells can provide signals that meet the quality requirement of basic services.
Radio
None
A larger value of this parameter leads to a higher probability of the The parameter cell meeting criteria modification has no S and becoming a V100R001C00 impact on the suitable cell for cell equipment. selection. A smaller value of this parameter results in a lower probability.
Radio
None
A larger parameter value for a cell leads to lower probabilities of the cell meeting criteria S and becoming a suitable cell for cell selection. A smaller value of this parameter leads to The parameter higher probabilities. modification has no Set this parameter V100R004C00 impact on the properly so that the equipment. selected cell can provide signals that meet the quality requirement of basic services. If the value of this parameter is not specified, the default value (negative infinity) is used.
Radio
None
V100R004C00
Radio
None
A larger value of this parameter leads to higher probabilities of the cell meeting criteria S and becoming a suitable cell for cell selection. A smaller The parameter value of this modification has no parameter results in V100R004C00 impact on the lower probabilities. equipment. If this parameter is not set, that is, the value of this parameter is not sent to the UE over the air interface, the UE retains the default value (0).
Radio
None
N/A
None
V100R001C01
Radio
None
If this parameter is set to BOOLEAN_FALSE and air interface resources are insufficient in smallbandwidth scenarios, data volume to be scheduled for SI messages cannot be increased in each TTI by The parameter adjusting the code modification has no rate. If this V100R002C00 impact on the parameter is set to equipment. BOOLEAN_TRUE, data volume to be scheduled for SI messages can be increased in each TTI by adjusting the code rate to increase the number of retransmissions while ensuring the cell coverage performance. A larger value of this parameter results in a smaller number of transmissions in a unit of time and a smaller amount of The parameter occupied system modification has no V100R001C01 resources, but it impact on the may also lead to a equipment. longer delay in UE's acquisition of the system information. A smaller value of this parameter leads to an opposite effect.
Radio
None
Radio
None
None
None
A larger value of this parameter results in a smaller number of transmissions in a unit of time and a smaller amount of The parameter occupied system modification has no V100R001C01 resources, but it impact on the may also lead to a equipment. longer delay in UE's acquisition of the system information. A smaller value of this parameter leads to an opposite effect. A larger value of this parameter results in a smaller number of transmissions in a unit of time and a smaller amount of The parameter occupied system modification has no V100R001C01 resources, but it impact on the may also lead to a equipment. longer delay in UE's acquisition of the system information. A smaller value of this parameter leads to an opposite effect. A larger value of this parameter results in a smaller number of transmissions in a unit of time and a smaller amount of The parameter occupied system modification has no V100R001C01 resources, but it impact on the may also lead to a equipment. longer delay in UE's acquisition of the system information. A smaller value of this parameter leads to an opposite effect.
Radio
Radio
Radio
None
None
None
A larger value of this parameter results in a smaller number of transmissions in a unit of time and a smaller amount of The parameter occupied system modification has no V100R001C01 resources, but it impact on the may also lead to a equipment. longer delay in UE's acquisition of the system information. A smaller value of this parameter leads to an opposite effect. A larger value of this parameter results in a smaller number of transmissions in a unit of time and a smaller amount of The parameter occupied system modification has no V100R001C01 resources, but it impact on the may also lead to a equipment. longer delay in UE's acquisition of the system information. A smaller value of this parameter leads to an opposite effect. A larger value of this parameter results in a smaller number of transmissions in a unit of time and a smaller amount of The parameter occupied system modification has no V100R001C01 resources, but it impact on the may also lead to a equipment. longer delay in UE's acquisition of the system information. A smaller value of this parameter leads to an opposite effect.
Radio
Radio
Radio
None
None
A larger value of this parameter results in a smaller number of transmissions in a unit of time and a smaller amount of The parameter occupied system modification has no V100R004C00 resources, but it impact on the may also lead to a equipment. longer delay in UE's acquisition of the system information. A smaller value of this parameter leads to an opposite effect. A larger value of this parameter results in a smaller number of transmissions in a unit of time and a smaller amount of The parameter occupied system modification has no V100R004C00 resources, but it impact on the may also lead to a equipment. longer delay in UE's acquisition of the system information. A smaller value of this parameter leads to an opposite effect. The parameter modification has no None impact on the equipment.
Radio
Radio
None
V100R005C00
Radio
None
V100R005C00
Radio
None
V100R005C00
Radio
None The setting of the PassLossCoeff parameter affects that of the P0NominalPUSCH parameter. If PassLossCoeff is set to a small value, it is recommended that P0NominalPUSCH be set to a large value to achieve higher sector throughput. If PassLossCoeff is set to a large value, it is recommended that P0NominalPUSCH be set to a small value to ensure higher data rates for cell edge users (CEUs). For example, if PassLossCoeff is set to 0, it is recommended that P0NominalPUSCH be set to a large value such as -10; if PassLossCoeff is set to 1, it is
N/A
None
V100R001C00
Radio
To guarantee the throughput of the serving cell, set this The parameter parameter to a large modification has no value. To guarantee V100R001C00 impact on the the total throughput equipment. of the network, set this parameter to a small value.
Radio
None
A larger value of this parameter leads to higher throughput in the cell but lower total throughput in the entire network. A The parameter smaller value of this modification has no parameter leads to V100R001C00 impact on the lower throughput in equipment. the cell and also lower interference to neighboring cells, which thereby results in higher total throughput in the entire network.
Radio
The setting of the P0NominalPUSCH parameter affects that of the PassLossCoeff parameter. If P0NominalPUSCH is set to a large value, it is recommended that PassLossCoeff be set to a small value to achieve higher sector throughput. If P0NominalPUSCH is set to a small value, it is recommended that PassLossCoeff be set to a large value to ensure higher data rates for cell edge users (CEUs).
When P0NominalPUSCH is set to an excessively high value, the cell throughput is increased, but the throughput of the The parameter entire network is modification has no decreased. When V100R001C00 impact on the P0NominalPUSCH equipment. is set to an excessively low value, the cell throughput is decreased. The throughput of the entire network, however, is increased.
Radio
None
The PUCCH transmit power is The parameter set based on this modification has no parameter for the V100R001C00 impact on the specific PUCCH equipment. format to guarantee the PUCCH performance.
Radio
None
The PUCCH transmit power is The parameter set based on this modification has no parameter for the V100R001C00 impact on the specific PUCCH equipment. format to guarantee the PUCCH performance. The PUCCH transmit power is The parameter set based on this modification has no parameter for the V100R001C00 impact on the specific PUCCH equipment. format to guarantee the PUCCH performance. The PUCCH transmit power is The parameter set based on this modification has no parameter for the V100R001C00 impact on the specific PUCCH equipment. format to guarantee the PUCCH performance. The PUCCH transmit power is The parameter set based on this modification has no parameter for the V100R001C00 impact on the specific PUCCH equipment. format to guarantee the PUCCH performance.
Radio
None
Radio
None
Radio
None
Radio
None
A relatively small value of this parameter may result in inadequate transmit power for message 3, leading to a reduced transmit power for the data channel and lower The parameter throughput of the modification has no cell. A relatively V100R001C00 impact on the large value of this equipment. parameter may result in excessive transmit power for message 3, leading to stronger interference to neighboring cells and lower throughput of the network.
Radio
None
N/A
None
V100R001C00
Radio
None
A smaller value of this parameter leads to a shorter period that nonuplink-time-aligned UEs transmit sounding reference signals (SRSs) and therefore fewer The parameter SRSs available for modification has no uplink-time-aligned V100R001C00 impact on the UEs. A larger value equipment. of this parameter hampers timely alignment for users with high-speed services and therefore may cause them to become non-uplinktime-aligned.
Radio
None
N/A
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
N/A
None
V100R001C00
Radio
None
V100R001C00
Radio
None
None
V100R001C00
Radio
None
None
V100R001C00
Radio
None
None
V100R001C00
Radio
None
None
V100R002C00
Radio
None
None
V100R001C00
Radio
None
None
V100R001C00
Radio
None
None
V100R001C00
Radio
None
None
V100R001C00
Radio
None
None
V100R001C00
Radio
None
None
V100R001C00
Radio
None
None
V100R001C00
Radio
None
None
V100R001C00
Radio
None
V100R001C00
Radio
None
None
V100R001C00
Radio
None
None
V100R001C00
Radio
None
V100R001C00
Radio
None
None
V100R001C01
Radio
None
None
V100R001C01
Radio
None
None
V100R001C01
Radio
None
V100R001C00
Radio
None
V100R001C01
Radio
None
Modifications on this parameter affect the orthogonality of the V100R001C00 preamble sequences for the cell and its neighboring cells.
Radio
None
None
V100R001C00
Radio
None
None
V100R001C01
Radio
None
None
V100R001C01
Radio
None
None
V100R003C00
Radio
None
None
V100R003C00
Radio
None
None
V100R003C00
Radio
None
V100R004C00
Radio
None
V100R004C00
Radio
None
V100R001C00
Radio
None
This parameter must be set The parameter properly to ensure modification has no that changes in V100R001C00 impact on the radio interference equipment. do not affect UE services in this cell.
Radio
None
None
V100R005C00
Radio
None
None
V100R005C00
Radio
None
None
V100R005C00
Radio
None
N/A
None
V100R001C00
Radio
N/A
N/A
None
V100R001C00
Radio
None
N/A
None
V100R001C00
Radio
None
N/A
None
V100R001C00
Radio
None
N/A
None
V100R001C00
Radio
None
N/A
None
V100R001C00
Radio
None
N/A
None
V100R002C00
Radio
None
N/A
None
V100R001C01
Radio
None
N/A
None
V100R001C01
Radio
None
N/A
None
V100R005C00
Radio
None
N/A
None
V100R005C00
Radio
None
N/A
None
V100R005C00
Radio
None
N/A
None
V100R004C00
Radio
None
N/A
None
V100R005C00
Radio
None
N/A
None
V100R004C00
Radio
None
V100R004C00
Radio
None
N/A
None
V100R003C00
Radio
None
A larger value of this parameter leads to less measurement The parameter reports, which will modification has no affect the prompt V100R003C00 impact on the update of UE equipment. locations and the average throughput of cell edge users (CEUs). A larger value of this parameter leads to higher estimation accuracy The parameter of interference from modification has no neighboring cells, V100R003C00 impact on the better service equipment. quality and larger average throughput of cell edge UEs (CEUs).
Radio
None
Radio
None
A larger value of this parameter leads to greater power consumption of the UE, but improves the throughput of cell edge users (CEUs) more effectively in dynamic ICIC mode. A smaller value of this parameter leads to less power The parameter consumption of the modification has no UE, but affects the V100R003C00 impact on the timely tracing of equipment. neighboring cells for CEUs. In this situation, the interferenceinducing neighboring cell cannot be correctly determined, which may affect the throughput gain for CEUs and even decrease the throughput for them in dynamic ICIC mode.
Radio
None
V100R003C00
Radio
None
V100R003C00
Radio
None
A larger value of this parameter leads to a lower probability of both The parameter triggering a DL ICIC modification has no measurement event V100R003C00 impact on the and stopping the equipment. event. A smaller value of this parameter leads to a higher probability.
Radio
None
A larger value of this parameter results in a lower probability of The parameter meeting the modification has no entering or leaving V100R003C00 impact on the condition of the DL equipment. ICIC measurement event. A smaller value leads to a higher probability.
Radio
None
A larger value of this parameter leads to a lower probability of triggering a DL ICIC measurement event and accordingly a smaller number of UEs that report related measurements. As a result, service quality is not guaranteed for CEUs, leading to The parameter drops in CEU modification has no throughput and cell V100R003C00 impact on the capacity. equipment. A smaller value of this parameter results in a higher probability of triggering a DL ICIC measurement event and accordingly a larger number of UEs that report related measurements. As a result, more UEs occupy the edge frequency band and the average CEU throughput drops. N/A None V100R002C00
Radio
None
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R003C00
Radio
None
N/A
None
V100R004C00
Radio
None
V100R004C00
Radio
None
A larger value of this parameter indicates a wider CIO adjustment range for the serving cell.
V100R004C00
Radio
None
A smaller value of this parameter indicates a wider CIO adjustment range for the serving cell.
V100R004C00
Radio
None
N/A
None
V100R001C01
Radio
None
A larger value of this parameter results in a larger number of Goldlevel services and hence higher usage The parameter of system resources modification has no by Gold-level V100R001C01 impact on the services. If this equipment. parameter is set to a small value, however, there is no impact on the radio network performance.
Radio
None
A larger value of this parameter leads to a larger number of Silverlevel services and hence more system The parameter resources occupied modification has no by Gold- and Silver- V100R001C01 impact on the level services. If this equipment. parameter is set to a small value, however, there is no impact on the radio network performance.
Radio
None
If the value of this parameter is too small, the admission threshold is too low for the handed-over service with QCI of 1. In this case, the QoS of the existing The parameter services cannot be modification has no guaranteed. V100R001C01 impact on the If the value of this equipment. parameter is too large, the admission threshold is too high for the handed-over service with QCI of 1. In this case, the admission success rate is low for services with QCI of 1.
Radio
None
If the value of this parameter is too small, the admission threshold is too low for the handed-over service with QCI of 2. In this case, the QoS of the existing The parameter services cannot be modification has no guaranteed. V100R001C01 impact on the If the value of this equipment. parameter is too large, the admission threshold is too high for the handed-over service with QCI of 2. In this case, the admission success rate is low for services with QCI of 2. If the value of this parameter is too small, the admission threshold is too low for the handed-over service with QCI of 3. In this case, the QoS of the existing The parameter services cannot be modification has no guaranteed. V100R001C01 impact on the If the value of this equipment. parameter is too large, the admission threshold is too high for the handed-over service with QCI of 3. In this case, the admission success rate is low for services with QCI of 3.
Radio
None
Radio
None
If the value of this parameter is too small, the admission threshold is too low for the handed-over service with QCI of 4. In this case, the QoS of the existing The parameter services cannot be modification has no guaranteed. V100R001C01 impact on the If the value of this equipment. parameter is too large, the admission threshold is too high for the handed-over service with QCI of 4. In this case, the admission success rate is low for services with QCI of 4.
Radio
None
If the value of this parameter is too small, the admission threshold is too low for new Gold-level services of all QCIs. In this case, the Gold-level services occupy too many system resources, and Silver- and Bronzelevel services The parameter cannot be admitted. modification has no This affects the V100R001C01 impact on the access success equipment. rates of the Silveror Bronze-level services of all QCIs. If the value of this parameter is too large, the admission threshold is too high for new Gold-level services. In this case, the access success rate is low for Gold-level services.
Radio
None
If the value of this parameter is too small, the admission threshold is too low for new Silver-level services of all QCIs. In this case, the Gold- and Silver-level services occupy too many system resources, and Bronze-level The parameter services cannot be modification has no admitted. This V100R001C01 impact on the affects the access equipment. success rates of the Bronze-level services of all QCIs. If the value of this parameter is too large, the admission threshold is too high for new Silver-level services. In this case, the access success rate is low for Silver-level services.
Radio
None
A smaller value of the parameter leads to a lower admission threshold for new Bronzelevel services of all QCIs. This may cause excessive service admission and hence affect The parameter the QoS of the modification has no admitted services. V100R001C01 impact on the A larger value of the equipment. parameter results in a higher admission threshold for new Bronze-level services of all QCIs, which may decrease the access success rate of Bronze-level services.
Radio
None
A larger value of this parameter leads to a higher probability of system congestion. In this situation, the system resource usage and the access success rate are low. A smaller value of this parameter leads to a lower probability of generating The parameter congestion modification has no indications and V100R001C01 impact on the therefore a higher equipment. access success rate. If the value is small, an excessive number of users may be admitted, but the load control actions are not taken in time to relieve the congestion. In this situation, the overall QoS satisfaction rate of the existing services decreases and the call drop rate increases.
Radio
None
A larger value of this parameter results in a higher probability of system congestion. If the value is large, the system resource usage and the access success rate are low. A smaller value of this parameter results in a lower probability of generating The parameter congestion modification has no indications and V100R001C01 impact on the hence a higher equipment. access success rate. If the value is small, an excessive number of users might be admitted, but the load control actions are not taken in time to relieve the congestion. In this case, the overall QoS satisfaction rate of the existing services drops and the call drop rate rises.
Radio
None
A larger value of this parameter leads to a higher probability of system congestion. In this case, the system resource utilization and the access success rate are low. A smaller value of this parameter leads to a lower probability of generating The parameter congestion modification has no indications and V100R001C01 impact on the hence a higher equipment. access success rate. If the value is small, an excessive number of users might be admitted, but the load control actions are not taken in time to relieve the congestion. In this case, the overall QoS satisfaction rate of the existing services drops and the call drop rate rises.
Radio
None
A larger value of this parameter indicates a higher probability of system congestion. If the value is large, the system resource usage and the access success rate are low. A smaller value of this parameter leads to a lower probability of generating The parameter congestion modification has no indications and V100R001C01 impact on the hence a higher equipment. access success rate. If the value is small, an excessive number of users might be admitted, but the load control actions are not taken in time to relieve the congestion. In this case, the overall QoS satisfaction rate of the existing services drops and the call drop rate rises.
Radio
None
A smaller value of the parameter results in higher efficiency of load control, but may cause a greater fluctuation in the QoS satisfaction rate of Gold-level GBR services. The parameter A larger value of the modification has no parameter causes a V100R002C00 impact on the smaller impact on equipment. the QoS satisfaction rate of Gold-level services and hence lower efficiency of load control. In this case, both the probability of leaving the congested state and the access success rate are lower.
Radio
None
A smaller value of this parameter results in higher efficiency of load control, but it also leads to a greater fluctuation in the QoS satisfaction rate of Silver-level GBR services. The parameter A larger value of modification has no this parameter V100R002C00 impact on the leads to a smaller equipment. impact on the QoS satisfaction rate of Silver-level services and lower efficiency of load control. In this case, the probability of leaving the congested state and the access success rate are lower.
Radio
None
A smaller value of this parameter results in higher efficiency of load control, but may cause a greater fluctuation in the QoS satisfaction rate of Bronze-level GBR services. A larger value of The parameter this parameter modification has no causes a smaller V100R002C00 impact on the impact on the QoS equipment. satisfaction rate of Bronze-level services, but results in lower efficiency of load control. In this case, both the probability of leaving the congested state and the access success rate are lower.
Radio
None
A smaller value of this parameter results in a smaller quantity of resources allowed to be occupied by GBR services and a lower admission success rate of GBR services, The parameter thereby causing a modification has no higher probability of V100R001C01 impact on the resource waste. equipment. A larger value of this parameter leads to a larger quantity of resources allowed to be occupied by GBR services and a smaller quantity of resources reserved for non-GBR services.
Radio
None
A smaller value of this parameter results in a lower probability of switching from a high-usage indication to a lowusage indication about GBR services. As a result, the The parameter probability of GBR modification has no service admission impact on the failure is higher. equipment. A larger value of this parameter results in a higher probability of pingpong effect in terms of switching between the highusage indication and the low-usage indication about GBR services.
V100R001C01
Radio
None
A larger value of this parameter indicates a smaller number of services that can be released by the system and results in a lower probability of congestion relief. A smaller value of this parameter indicates a larger number of services that can be The parameter released by the modification has no system and results V100R001C01 impact on the in a higher equipment. probability of congestion relief and a higher call drop rate. The priority of the Gold-level, Silverlevel, and Bronzelevel services should be considered for the setting of the ARP threshold. If the value of this parameter is too small, even Goldlevel services may
Radio
None
A larger value of this parameter leads to a lower probability of congestion relief. In the case of congestion, services are released as a load The parameter control action, and modification has no therefore the call V100R001C01 impact on the drop rate is equipment. increased. A smaller value of this parameter results in a higher probability of congestion relief, but it may lead to frequent switching between overload and overload relief.
Radio
None
A larger value of this parameter results in fewer types of preemptible service and a lower access success rate of high-priority users by means of preemption. Therefore, the highThe parameter priority users have modification has no worse experience. V100R002C00 impact on the A smaller value of equipment. this parameter results in more types of preemptible service and a higher access success rate of high-priority users by means of preemption. In this case, the call drop rate is higher.
Radio
None
A larger value of this parameter leads to a lower probability of generating the high usage indication of UL RBs, which may cause excessive admission, but the protection over resource allocation is performed after the admission decision. In addition, when the The parameter value of the modification has no parameter is too V100R001C01 impact on the large, load control equipment. actions are taken more slowly. A smaller value of this parameter leads to a higher probability of generating the high usage indication of UL RBs, but the satisfaction rates are compared further to make admission decisions. Therefore, the parameter has no
Radio
None
A larger value of this parameter leads to a lower probability of generating the high usage indication of DL RBs, which may cause excessive admission, but the protection for resource allocation is performed after the admission decision. In addition, when the The parameter value of the modification has no parameter is too V100R001C01 impact on the large, load control equipment. actions are taken more slowly. A smaller value of this parameter leads to a higher probability of generating the high usage indication of DL RBs but the satisfaction rates are compared further for admission decision. Therefore, this parameter has no obvious impact on
Radio
None
A larger value of this parameter leads to a higher probability of generating the low usage indication of UL RBs, which may cause excessive admission, but the protection for resource allocation is performed after the admission decision. Therefore, this parameter does The parameter not affect the the modification has no overall QoS V100R001C01 impact on the satisfaction rate equipment. much. A smaller value of this parameter leads to a lower probability of generating the low usage indication of UL resources resource blocks and hence a lower admission success rate, but the protection for resource allocation is performed after the admission
Radio
None
A larger value of this parameter leads to a higher probability of generating the low usage indication of DL RBs, which may cause excessive admission, but the protection for resource allocation is performed after the admission decision. Therefore, this parameter has The parameter no obvious impact modification has no on the overall QoS V100R001C01 impact on the satisfaction rate. equipment. A smaller value of this parameter leads to a lower probability of generating the low usage indication of UL resources resource blocks and hence a lower admission success rate, but the protection for resource allocation is performed after the admission decision. Therefore,
Radio
None
A smaller value of this parameter results in fewer nonThe parameter GBR services that modification has no can be admitted; a V100R001C01 impact on the larger value of this equipment. parameter results in more non-GBR services that can be admitted.
Radio
None
N/A
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
N/A
None
V100R005C00
Radio
None
V100R005C00
Radio
None
None
V100R005C00
Radio
None
The parameter modification takes effect after the cell is automatically reset. N/A
None
V100R005C00
Radio
None
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
N/A
None
V100R003C00
Radio
None
A larger value of this parameter leads to less measurement The parameter reports, which will modification has no affect the prompt V100R003C00 impact on the update of UE equipment. locations and the average throughput of cell edge users (CEUs).
Radio
None
A larger value of this parameter leads to higher estimation accuracy The parameter of interference from modification has no neighboring cells, V100R003C00 impact on the better service equipment. quality and larger average throughput of cell edge UEs (CEUs).
Radio
None
A larger value of this parameter leads to greater power consumption of the UE, but improves the throughput of cell edge users (CEUs) more effectively in dynamic ICIC mode. A smaller value of this parameter leads to less power The parameter consumption of the modification has no UE, but affects the V100R003C00 impact on the timely tracing of equipment. neighboring cells for CEUs. In this situation, the interferenceinducing neighboring cell cannot be correctly determined, which may affect the throughput gain for CEUs and even decrease the throughput for them in dynamic ICIC mode.
Radio
None
V100R003C00
Radio
None
V100R003C00
Radio
None
A larger value of this parameter leads to a lower probability of both The parameter triggering a UL ICIC modification has no measurement event V100R003C00 impact on the and stopping the equipment. event. A smaller value of this parameter leads to a higher probability.
Radio
None
A larger value of this parameter results in a lower probability of The parameter meeting the modification has no entering or leaving V100R003C00 impact on the condition of the UL equipment. ICIC measurement event. A smaller value leads to a higher probability.
Radio
None
A large value of this parameter leads to a low probability of triggering a UL ICIC measurement event and hence a small number of UEs that report the related measurements. As a result, the service qualities provided for CEUs may not be guaranteed, leading to drops in The parameter CEU throughput modification has no and cell capacity. V100R003C00 impact on the A small value of this equipment. parameter results in a high probability of triggering a UL ICIC measurement event and hence a large number of UEs that report the related measurements. As a result, more UEs may occupy the edge frequency band and the throughput of each CEU may drop.
Radio
None
N/A
None
V100R002C00
Radio
None
If this parameter is set to ULSCH_STRATEG Y_EPF, the QoS is guaranteed, and the coverage, capacity, and fairness are considered. If this parameter is set to ULSCH_STRATEG Y_MAX_CI, the system capacity is maximized, but the coverage, fairness, and QoS are not The parameter guaranteed. If this modification has no parameter is set to V100R002C00 impact on the ULSCH_STRATEG equipment. Y_PF, a tradeoff among the coverage, capacity, and fairness is reached, but the QoS is not guaranteed. If this parameter is set to ULSCH_STRATEG Y_RR, the eNodeB guarantees that each UE has an equal opportunity to be scheduled in UL, but the capacity, coverage and QoS
Radio
None
Setting this parameter to ADAPTIVE_HARQ_ SW_ON helps reduce resource consumption due to retransmission, The parameter increase the cell modification has no throughput, and V100R002C00 impact on the prevent equipment. retransmission conflicts. This, on the other hand, will increase signaling overhead and therefore consume more PDCCH resources.
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
None
V100R002C00
Radio
None
None
V100R003C00
Radio
None
A larger value of this parameter leads to a shorter service delay. An excessively large value of this parameter, however, decreases the transmission efficiency. A smaller The parameter value of this modification has no parameter leads to V100R004C00 impact on the a longer service equipment. delay. Note that when the user data volume is smaller than the value of this parameter, setting this parameter to a smaller value will increase the transmission efficiency.
Radio
None
An excessively large value of this parameter may lead The parameter to a waste of modification has no resources due to a V100R004C00 impact on the delayed implicit equipment. release of semipersistent resources.
Radio
None
N/A
None
V100R005C00
Radio
None
V100R005C00
Radio
None
V100R005C00
Radio
None
V100R005C00
Radio
None
V100R005C00
Radio
None
V100R005C00
Radio
None
V100R005C00
Radio
None
N/A
None
V100R001C00
Radio
None
RachAdjSwitch: If this switch is turned on, based on the number of accessed UEs, the algorithm can improve the utilization of dedicated preambles while ensuring that the probability is less than or equal to 1% that a UE with the random access procedure triggered The parameter by handover (case modification has no 3) or arrival of V100R001C00 impact on the downlink data (case equipment. 4) is not allocated with a dedicated preamble. In addition, the algorithm can also improve the PRACH utilization while ensuring that the probability is less than or equal to 1% that multiple UEs initiate random access procedures triggered by initial access (case 1), failed radio link
Radio
None
V100R001C00
Radio
None
If the switch is turned on, the PUCCH resources are increased or decreased adaptively based on the load on the PUCCH. This achieves better utilization of PUCCH resources and reduces UL control signaling overhead. When V100R001C00 the PUCCH resources are decreased, however, a few users may need to reconfigure the CQI resources, which consumes certain DL resources. If the switch is turned off, the UL control signaling overhead is relatively large.
Radio
None
When a PDCP packet queue is congested, the automatic packet discarding mechanism is The parameter started if modification has no AqmAlgoSwitch is V100R001C00 impact on the set to ON. This equipment. reduces the delay of interactive services, but it slightly increases the time used to download large-sized files.
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C01
Radio
None
DlSwitch: If this switch is set to OFF, the admission evaluation based on the satisfaction rate is not performed for new or handed-over services in the downlink. In this case, there is a relatively high probability of overload in the downlink. The parameter If this switch is set modification has no to ON, the V100R001C01 impact on the admission equipment. evaluation based on the satisfaction rate is performed for new and handedover services in the downlink. UlSwitch: If this switch is set to OFF, the admission evaluation based on the satisfaction rate is not performed for new or handed-over services in the uplink. In this case,
Radio
None
If the intrafrequency load balancing switch is set to OFF, the intrafrequency MLB function is disabled. In this case, intrafrequency load imbalances cannot be handled. Therefore, the probability of overload is relatively high, and the access success The parameter rate and the total modification has no throughput are V100R002C00 impact on the relatively low. If this equipment. switch is set to ON, the intra-frequency MLB function is enabled. Then, in the case that the load in the cell is heavy and there is an imbalance in the load between cells, the probability of overload in the system is relatively low, and the access success rate and the total throughput are relatively high.
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R003C00
Radio
None
V100R003C00
Radio
None
None
V100R003C00
Radio
None
If FreqPriorIFHOSwitc h is set to On, the frequency-prioritybased interfrequency handover is enabled. It increases the number of handovers, but improves the data rate of the UE. To speed up handover, you are advised to set both The parameter FreqPriorIFHOSwitc modification has no h and V100R003C00 impact on the FreqPriorIFBlindHO equipment. Switch to On. In addition, to ensure handover success rate, strictly set the triggering conditions of the frequencypriority-based interfrequency handover; for example, set the threshold related to event A1 to a large value. The purpose is to decrease the number of UEs that will be handed over
Radio
None
If the switch is turned on, the downlink average throughput in a The parameter heavily loaded cell modification has no is relatively high. V100R004C00 impact on the Turn off this switch equipment. if a cell is lightly loaded or multi-user pairing is not desired.
Radio
None
V100R005C00
Radio
None
If this parameter is set to ACBAR_SWITCH_ DYNAMIC, the access probability factor and the average access The parameter barring duration for modification has no mobile-originated V100R005C00 impact on the calls are equipment. dynamically adjusted based on the current cell load. In this way, the probabilities of UEs accessing the cell can be controlled to relieve the cell load.
Radio
None
V100R005C00
Radio
None
V100R005C00
Radio
None
N/A
None
V100R001C00
Radio
None
V100R001C00
Radio
None
N/A
None
V100R002C00
Radio
None
V100R002C00
Radio
None
N/A
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
N/A
None
V100R001C00
Radio
None
V100R001C00
Radio
None
N/A
None
V100R001C00
Radio
None
V100R001C00
Radio
None
None
V100R003C00
Radio
None
If this parameter is used, the eNodeB performs differentiation control between the P2P service and the non-P2P service that are carried by the non-GBR bearer. In this case, The parameter when traffic is modification has no heavy in a cell, the V100R001C00 impact on the data rate of the P2P equipment. service on the air interface can be effectively controlled on the basis of the userdefined priority, thereby preventing the P2P service from severely impacting on other services in the cell.
Radio
None
A larger value of this parameter indicates a larger amount of resources allocated to non-P2P services. A smaller value of this parameter indicates a smaller The parameter amount. modification has no Adjustment of the V100R001C00 impact on the parameter value will equipment. affect the throughput in a cell. Whether the throughput will increase or decrease depends on the distribution of UEs that request non-P2P services in the cell.
Radio
None
Indicates the maximum number of layers (the rank) in the implementation of The parameter multiple-input modification has no multiple-output impact on the (MIMO) in DL equipment. scheduling. The value of this parameter has a significant impact on the throughput under MIMO.
V100R004C00
Radio
None
N/A
None
V100R002C00
Radio
None
The value of this parameter has an obvious impact on the use of the MLB algorithm. A large value of this parameter may lead to the situation The parameter where the optimum modification has no balancing among V100R002C00 impact on the the cell load is not equipment. reached when overload occurs. A small value of this parameter, however, may lead to excessive handovers and signaling exchanges.
Radio
None
The value of this parameter has an obvious impact on the use of the MLB algorithm. A large value of this parameter may lead to the situation The parameter where the optimum modification has no balancing among V100R002C00 impact on the the cell load is not equipment. reached when overload occurs. A small value of this parameter, however, may lead to excessive handovers and signaling exchanges.
Radio
None
The value of this parameter has an obvious impact on the use of the interRAT MLB algorithm. A large value of this parameter may lead to the situation where the optimum balancing among The parameter the cell load is not modification has no reached when V100R002C00 impact on the overload occurs. A equipment. small value, however, may cause excessive inter-RAT handovers. This may deteriorate the system performance since the inter-RAT handover has a low success rate.
Radio
None
A small value of this parameter may cause frequent load updates and induce The parameter excessive signaling modification has no overhead. A large V100R002C00 impact on the value of this equipment. parameter may hinder the cell from timely obtaining the load status in neighboring cells.
Radio
None
A large value of this parameter may cause difficulties in timely triggering the load balancing when the cell load is unbalanced, or cause difficulties in The parameter timely stopping the modification has no load balancing V100R002C00 impact on the when the cell load is equipment. balanced. A small value of this parameter, however, may result in the frequent triggering or stopping of the load balancing algorithm.
Radio
None
If this parameter is set to a large value, load balancing may The parameter not be initiated or modification has no stopped in time. If V100R003C00 impact on the this parameter is set equipment. to a small value, load balancing may be initiated and stopped frequently.
Radio
None
N/A
None
V100R003C00
Radio
None
V100R004C00
Radio
None
The value of this parameter determines whether to perform dynamic adjustment of the UL-to-DL CCE ratio on the PDCCH. The parameter Changing the value modification has no of this parameter V100R003C00 impact on the affects the number equipment. of available UL and DL CCEs. This further affects the number of scheduled users and the UL and DL throughput.
Radio
None
Changing the value of this parameter V100R003C00 affects the DL throughput.
Radio
None
V100R004C00
Radio
None
The setting of the switch determines whether to perform dynamic adjustment of the number of OFDM symbols occupied by PDCCH. If this switch is turned off, PDCCH occupies the fixed number of The parameter OFDM symbols in modification has no each TTI. If this V100R003C00 impact on the switch is turned on, equipment. the number of OFDM symbols occupied by PDCCH is dynamically adjusted based on the number of UEs to be scheduled in each TTI, maximizing the system capacity.
Radio
None
If an upper limit is applied to the CCE usage within each TTI, the number of The parameter scheduled users modification has no drops, affecting the V100R004C00 impact on the UL and DL equipment. throughout and even the service quality and the maximum number of UEs in the cell.
Radio
None
The setting of the switch determines whether to adjust the PDCCH aggregation level based on the BLER of the PDCCH. After this switch is turned on, the BLER of the PDCCH can converge to the target BLER value. If the BLER is far below the target The parameter value before the modification has no switch is turned on, V100R005C00 impact on the the number of equipment. control channel elements (CCEs) for each UE can be reduced to improve cell capacity after the switch is turned on. If the BLER is far above the target value before the switch is turned on, the BLER can converge to the target value to improve the cell coverage after the switch is turned on. N/A None V100R001C00
Radio
None
Radio
None
A larger value of this parameter leads to less The parameter available SRI modification has no resources. impact on the A smaller value of equipment. this parameter leads to more available SRI resources.
V100R003C00
Radio
None
N/A
None
V100R001C00
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R001C00
Radio
None
N/A
None
V100R001C00
Radio
None
V100R001C00
Radio
None
N/A
None
V100R001C00
Radio
None
V100R001C01
Radio
None
V100R003C00
Radio
None
N/A
None
V100R001C01
Radio
None
N/A
None
V100R001C01
Radio
None
N/A
None
V100R001C01
Radio
None
N/A
None
V100R001C01
Radio
None
N/A
None
V100R001C01
Radio
None
N/A
None
V100R001C01
Radio
None
N/A
None
V100R001C00
Radio
None
If the length of the default paging cycle is fixed, a larger value of this parameter results in a longer modification period and a larger number of times that UEs are required to read system information V100R001C00 change notifications, which leads to higher reliability of acquiring such notifications. A longer modification period, however, results in a longer delay in the system information change.
Radio
None
N/A
None
V100R001C00
Radio
None
None
The setting of this parameter affects the coverage of the PCFICH channel. A larger value of this parameter leads to a better coverage performance, but induces stronger radio interference to The parameter neighboring cells. modification has no This causes a V100R001C00 impact on the waste of power and equipment. reduces available power for the PHICH and PDCCH channels. A smaller value of this parameter, however, may lead to insufficient coverage and coverage holes. The setting of this parameter affects the coverage area of the PBCH channel. A larger value of this parameter results in better coverage The parameter performance, but it modification has no induces stronger V100R001C00 impact on the interference to equipment. neighboring cells and may cause a waste of power. A smaller value of this parameter, however, may lead to insufficient coverage and coverage holes.
Radio
Radio
None
The setting of this parameter affects the coverage performance of the SCH channel. A larger value of this parameter results in better coverage The parameter performance, but it modification has no induces stronger V100R001C00 impact on the interference to equipment. neighboring cells and may cause a waste of power. A smaller value of this parameter, however, may lead to insufficient coverage and coverage holes.
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R003C00
Radio
None
N/A
None
V100R001C00
Radio
None
1) Coverage: If the value of ReferenceSignalPw r is too large, crosscoverage occurs. This causes interference to other cells. If the value of ReferenceSignalPw r is too small, coverage holes appear. 2) Interference: The setting of ReferenceSignalPw The parameter r varies with the modification has no interference from V100R001C00 impact on the neighboring cells. A equipment. large interference margin is required where the interference is strong. 3) Channel estimation: A larger value of ReferenceSignalPw r leads to higher channel estimation accuracy, a lower demodulation threshold, and higher receiver sensitivity, but it A larger value of Pb results in a larger increase in ReferenceSignalPw r, better channel estimation performance, and The parameter better PDSCH modification has no demodulation V100R001C00 impact on the performance. equipment. Meanwhile, it also leads to lower transmit power of the PDSCH (type B) and therefore increases the data rate of cell edge users (CEUs).
Radio
None
Radio
None
N/A
None
V100R001C00
Radio
None
Radio
None
Radio
None
The value of this The parameter parameter has a modification has no negative correlation V100R005C00 impact on the with the cell equipment. coverage.
Radio
None
The modification to this parameter will affect the interference between the PRACH of the current cell and the PUSCH of a neighboring cell or between the PUSCH of the V100R005C00 current cell and the PRACH of a neighboring cell. The modification to this parameter will affect the maximum number of consecutive RBs that can be scheduled on the PUSCH.
Radio
None
None
V100R005C00
Radio
None
The starting position in the time domain and appearance period of the PRACH can be specified based on the setting of this parameter. A smaller PRACH interval can reduce the probability of V100R005C00 preamble collision during contentionbased random access, and reduce the average access delay. A larger PRACH interval, however, can lower the UL resource utilization of the PRACH.
Radio
None
N/A
None
V100R001C00
Radio
None
None
V100R001C00
Radio
None
None
V100R001C00
Radio
None
If this parameter is set to BOOLEAN_TRUE, the beamforming performance is ensured, DL openloop and closedloop adaptive MIMO is supported, and UE pairing performance for MUMIMO is ensured, but the UL peak throughput decreases. If this parameter is V100R005C00 set to BOOLEAN_FALSE, the UL peak throughput increases, but the beamforming performance cannot be ensured, DL open-loop and closed-loop adaptive MIMO is not supported, and UE pairing performance for MUMIMO cannot be ensured.
Radio
None
If this parameter is set to ACCESS_FIRST, the number of UEs in TDD cells can reach the upper limit, but the performance of features that rely on SRS resources cannot be ensured. V100R005C00 If this parameter is set to EXPERIENCE_FIR ST, the UL throughput of TDD cells can reach the upper limit and the optimal beamforming performance can be achieved.
Radio
None
N/A
None
V100R005C00
Radio
None
N/A
None
V100R001C00
Radio
None
None
V100R001C00
Radio
None
A large value of this parameter indicates a large amount of occupied control channel resources and a small constraint on the uplink scheduling. A V100R001C00 small value of this parameter indicates a small amount of occupied control channel resources and a great constraint on the uplink scheduling.
Radio
None
N/A
None
V100R001C00
Radio
None
The values of this parameter and the NB parameter determine the number of paging occasions, that is, the number of paging groups. A larger value of this parameter leads to a longer delay in paging a UE but helps reduce the power consumption of the UE. A smaller V100R001C00 value of this parameter leads to a shorter delay in paging a UE but causes more power consumption of the UE. If the EPC specifies a DRX period for a UE, the UE uses the smaller value between the period and the parameter value as its DRX period. For a certain paging load, a larger value of this parameter indicates a larger paging capacity during a specific V100R001C00 period, and a smaller value of this parameter indicates a smaller paging capacity during a specific period.
Radio
None
Radio
None
N/A
None
V100R001C00
Radio
None
None
V100R001C00
Radio
None
None
V100R001C00
Radio
None
None
V100R001C00
Radio
None
As a supplement to planning of base sequence groups for UL RS generation, group hopping simplifies the planning and randomizes UL RS correlation interference. Though the current group hopping can significantly reduce the probability of collisions that neighboring cells use the same base V100R001C00 sequence group in a TTI, it cannot completely prevent such collisions. a) When the number of cells is smaller than 30, the reuse of base sequence groups does not occur. In this case, group hopping is not required. Therefore, it is recommended that group hopping be disabled. b) When the
Radio
None
When GroupAssignPUSC H of all cells under one eNodeB is set to 0, the UL RSs on the PUSCHs are generated on the basis of different base sequence groups. In this case, each cell can use any Cyclic Shift (CS) value during the generation of the UL RS. The The parameter more the available modification has no CS values, the V100R001C00 impact on the more the V-MIMO equipment. users that can be matched. When GroupAssignPUSC H of cells under one eNodeB is set to different values, the UL RSs on the PUSCHs can be generated on the basis of the same base sequence. Thus, the orthogonality of UL RSs between neighboring cells
Radio
None
When group hopping is not performed, sequence hopping can be supported. After base sequences are divided into groups, the base sequences within each group have great correlations (the base sequences are almost regarded as identical). The correlations between a base V100R001C00 sequence in group A and the base sequences in group B are similar to those between any other base sequence in group A and the base sequences in group B. Thus, sequence hopping is equivalent to the use of an identical base sequence in each TTI, which does not result in an obvious difference
Radio
None
When all cells under one eNodeB use the same base sequence group to generate UL RSs on PUSCHs, different CyclicShift values need to be set for these cells The parameter so that the cells use modification has no different cyclic shifts V100R001C00 impact on the during semiequipment. persistent scheduling. When the cells under one eNodeB use different base sequence groups to generate UL RSs on PUSCHs, set CyclicShift to 0.
Radio
None
The parameter modification takes effect after the cell is automatically reset. N/A
None
V100R001C00
Radio
None
None
V100R001C00
Radio
None
None
V100R001C00
Radio
None
If this parameter is set to a large value, the cell can serve more UEs at the expense of increased UL signaling overhead. V100R005C00 If this parameter is set to a small value, the cell can serve fewer UEs, and this also reduces the UL signaling overhead.
Radio
None
If this parameter is set to a large value, the cell can serve more UEs supporting periodic CQI reporting, however, this also increases the UL signaling overhead. V100R005C00 If this parameter is set to a small value, the cell serves less UEs supporting periodic CQI reporting, and this also reduces the UL signaling overhead.
Radio
None
N/A
None
V100R002C00
Radio
None
N/A
None
V100R003C00
Radio
None
N/A
None
V100R003C00
Radio
None
N/A
None
V100R001C00
Radio
None
N/A
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R002C00
Radio
N/A
N/A
None
V100R002C00
Radio
None
V100R003C00
Radio
None
V100R003C00
Radio
N/A
N/A
None
V100R001C00
Radio
N/A
N/A
None
V100R001C00
Radio
N/A
N/A
None
V100R001C00
Radio
None
The entering condition of event B1 is as follows: Mn + Ofn - Hys > Thresh. Where, Mn is the measurement value of neighboring cells. Ofn is the frequencyspecific offset of the neighboring cell, Thresh is the threshold for this event, and Hys refers to the The parameter hysteresis for this modification has no event. V100R001C00 impact on the The smaller the equipment. value of Ofn is, the harder event B1 is triggered, and the more slowly the handover is implemented. This affects the user experience. The bigger the value of Ofn is, the easier event B1 is triggered. This also easily causes error decisions and pingpong handovers.
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
N/A
None
V100R002C00
Radio
None
N/A
None
V100R002C00
Radio
N/A
N/A
None
V100R002C00
Radio
None
N/A
None
V100R002C00
Radio
None
N/A
None
V100R003C00
Radio
None
N/A
None
V100R003C00
Radio
None
N/A
None
V100R002C00
Radio
None
N/A
None
V100R002C00
Radio
None
N/A
None
V100R002C00
Radio
None
N/A
None
V100R002C00
Radio
None
N/A
None
V100R003C00
Radio
None
N/A
None
V100R003C00
Radio
None
N/A
None
V100R002C00
Radio
None
N/A
None
V100R002C00
Radio
None
N/A
None
V100R002C00
Radio
None
N/A
None
V100R003C00
Radio
None
N/A
None
V100R003C00
Radio
None
N/A
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R003C00
Radio
N/A
N/A
None
V100R001C00
Radio
N/A
N/A
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R002C00
Radio
N/A
N/A
None
V100R002C00
Radio
None
V100R003C00
Radio
None
V100R003C00
Radio
N/A
N/A
None
V100R001C00
Radio
N/A
N/A
None
V100R001C00
Radio
None
A larger value of this parameter indicates a higher The parameter probability of a UE modification has no camping on the V100R001C00 impact on the cells assigned with equipment. the band class, and a smaller value indicates a lower probability.
Radio
None
A larger value of this parameter leads to a lower probability of a UE The parameter camping on a cell modification has no on a frequency in V100R001C00 impact on the the higher-priority equipment. CDMA2000 band class, and a smaller value indicates a higher probability.
Radio
None
A larger value of this parameter leads to a lower probability of a UE The parameter camping on a cell modification has no on a frequency in V100R001C00 impact on the the lower-priority equipment. band class, and a smaller value leads to a higher probability.
Radio
N/A
N/A
None
V100R001C00
Radio
N/A
N/A
None
V100R001C00
Radio
N/A
N/A
None
V100R001C00
Radio
N/A
N/A
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C01
Radio
None
V100R003C00
Radio
None
V100R005C00
Radio
N/A
N/A
None
V100R001C00
Radio
N/A
N/A
None
V100R001C00
Radio
N/A
N/A
None
V100R001C00
Radio
N/A
N/A
None
V100R001C00
Radio
N/A
N/A
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R002C00
Radio
N/A
N/A
None
V100R002C00
Radio
None
V100R003C00
Radio
None
V100R003C00
Radio
None
N/A
None
V100R005C00
Radio
None
N/A
None
V100R005C00
Radio
None
N/A
None
V100R005C00
Radio
N/A
N/A
None
V100R001C00
Radio
N/A
N/A
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
A larger value of this parameter indicates a higher probability of a UE The parameter camping on the cell modification has no on a frequency in V100R001C00 impact on the the GERAN carrier equipment. frequency group, and a smaller value indicates a lower probability.
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
A larger value of this parameter leads to a lower probability of a neighboring cell on a frequency in the GERAN carrier frequency group becoming a suitable The parameter cell for cell modification has no selection. A smaller V100R001C00 impact on the value of this equipment. parameter leads to a high probability. Set this parameter properly so that the selected cell can provide signals that meet the quality requirement of basic services.
Radio
None
When other conditions unchanged, a larger value of this parameter leads to a lower probability The parameter of reselection to a modification has no neighboring cell on V100R001C00 impact on the a frequency in the equipment. higher-priority carrier frequency group, and a smaller value of this parameter leads to a higher probability.
Radio
None
With other conditions unchanged, a larger value of this parameter leads to a lower probability The parameter of reselection to a modification has no neighboring cell on V100R001C00 impact on the a frequency in the equipment. lower-priority carrier frequency group, and a smaller value of this parameter leads to a higher probability.
Radio
None
The entering condition of event B1 is as follows: Mn + Ofn - Hys > Thresh. Where, Mn is the measurement value of neighboring cells. Ofn is the frequencyspecific offset of the neighboring cell, Thresh is the threshold for event B1, and Hys is the The parameter hysteresis for event modification has no B1. V100R001C00 impact on the The smaller the equipment. value of Ofn is, the harder event B1 is triggered, and the more slowly the handover is implemented. This affects the user experience. The bigger the value of Ofn is, the easier event B1 is triggered. This also easily causes error decision and pingpong handover.
Radio
None
V100R001C00
Radio
None
N/A
None
V100R001C00
Radio
None
N/A
None
V100R001C00
Radio
None
N/A
None
V100R001C00
Radio
N/A
N/A
None
V100R001C00
Radio
N/A
N/A
None
V100R001C00
Radio
None
V100R005C00
Radio
None
V100R005C00
Radio
N/A
N/A
None
V100R001C00
Radio
N/A
N/A
None
V100R001C00
Radio
N/A
N/A
None
V100R001C00
Radio
None
N/A
None
V100R001C00
Radio
N/A
N/A
None
V100R001C00
Radio
None
A larger value of this parameter leads to a higher The parameter probability of modification has no triggering event A3 V100R001C00 impact on the and handover. A equipment. smaller value of this parameter leads to a lower probability.
Radio
None
Increasing the value of this parameter causes the cell edge to move towards the The parameter neighboring cell, modification has no which leads to a V100R001C00 impact on the lower probability of equipment. cell reselection to the neighboring cell. Decreasing the value of this parameter leads to an opposite effect.
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
N/A
N/A
None
V100R002C00
Radio
None
V100R003C00
Radio
None
V100R003C00
Radio
N/A
N/A
None
V100R001C00
Radio
N/A
N/A
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
A larger value of this parameter leads to a higher probability of starting The parameter measurements on modification has no cells on the V100R001C00 impact on the neighboring Eequipment. UTRAN frequency and also a higher probability of reselection to a cell on the frequency.
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
Radio
None
Radio
None
V100R001C00
Radio
None
A larger value of this parameter The parameter leads to a lower modification has no probability of V100R001C00 impact on the reselection to a equipment. neighboring cell on the frequency.
Radio
None
With other conditions unchanged, a larger value of this parameter leads to The parameter a lower probability modification has no of reselection to the V100R001C00 impact on the cell on the higherequipment. priority frequency, and a smaller value of this parameter leads to a higher probability.
Radio
None
With other conditions unchanged, a larger value of this parameter leads to The parameter a lower probability modification has no of reselection to a V100R001C00 impact on the neighboring cell on equipment. the lower-priority EUTRAN frequency, and a smaller value of this parameter leads to a higher probability.
Radio
None
A larger value of this parameter leads to a lower probability of a neighboring cell on the frequency meeting criteria S and becoming a The parameter suitable cell for modification has no selection. A smaller V100R001C00 impact on the value of this equipment. parameter leads to a higher probability. Set this parameter properly so that the selected cell can provide signals that meet the quality requirement of basic services.
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
Setting this parameter to EventA3 improves the performance of handovers to intraband interfrequency The parameter neighboring cells in modification has no terms of timeliness V100R003C00 impact on the and interference. equipment. Setting this parameter to EventA4 reduces the number of interband interfrequency handovers.
Radio
None
With other conditions unchanged, a larger value of this parameter leads to The parameter a lower probability modification has no of reselection to a V100R004C00 impact on the neighboring cell on equipment. the higher-priority EUTRAN frequency, and a smaller value of this parameter leads to a higher probability.
Radio
None
With other conditions unchanged, a larger value of this parameter leads to The parameter a lower probability modification has no of reselection to a V100R004C00 impact on the neighboring cell on equipment. the lower-priority EUTRAN frequency, and a smaller value of this parameter leads to a higher probability.
Radio
None
V100R004C00
Radio
None
A larger value of this parameter leads to a lower probability of the cell meeting criterion S and becoming a suitable cell selected by a The parameter UE. A smaller value modification has no of this parameter V100R004C00 impact on the leads to a higher equipment. probability. Set this parameter properly so that the selected cell can provide signals that meet the quality requirement of basic services.
Radio
N/A
N/A
None
V100R001C00
Radio
N/A
N/A
None
V100R001C00
Radio
N/A
N/A
None
V100R001C00
Radio
None
V100R005C00
Radio
None
V100R005C00
Radio
N/A
N/A
None
V100R001C00
Radio
N/A
N/A
None
V100R001C00
Radio
N/A
N/A
None
V100R001C00
Radio
None
N/A
None
V100R001C00
Radio
N/A
N/A
None
V100R001C00
Radio
None
A larger value of this parameter results in lower probabilities of The parameter triggering event A4 modification has no and therefore V100R001C00 impact on the performing equipment. handovers. A smaller value of this parameter results in an opposite effect.
Radio
None
Increasing the value of this parameter causes the cell edge to move towards the The parameter neighboring cell, modification has no which leads to a V100R001C00 impact on the lower probability of equipment. cell reselection to the neighboring cell. Decreasing the value of this parameter leads to an opposite effect.
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R002C00
Radio
N/A
N/A
None
V100R002C00
Radio
None
V100R003C00
Radio
None
V100R003C00
Radio
N/A
N/A
None
V100R001C00
Radio
N/A
N/A
None
V100R001C00
Radio
N/A
N/A
None
V100R001C00
Radio
N/A
N/A
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R003C00
Radio
N/A
N/A
None
V100R005C00
Radio
N/A
N/A
None
V100R005C00
Radio
N/A
N/A
None
V100R005C00
Radio
N/A
N/A
None
V100R005C00
Radio
None
V100R005C00
Radio
None
V100R005C00
Radio
N/A
N/A
None
V100R001C00
Radio
N/A
N/A
None
V100R001C00
Radio
N/A
N/A
None
V100R001C00
Radio
N/A
N/A
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R002C00
Radio
N/A
N/A
None
V100R002C00
Radio
None
V100R003C00
Radio
None
V100R003C00
Radio
None
N/A
None
V100R005C00
Radio
None
N/A
None
V100R005C00
Radio
None
N/A
None
V100R005C00
Radio
None
N/A
None
V100R005C00
Radio
N/A
N/A
None
V100R005C00
Radio
N/A
N/A
None
V100R005C00
Radio
N/A
N/A
None
V100R005C00
Radio
N/A
N/A
None
V100R005C00
Radio
None
V100R005C00
Radio
None
V100R005C00
Radio
N/A
N/A
None
V100R001C00
Radio
N/A
N/A
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
A larger value of this parameter leads to a higher probability of starting The parameter measurements on modification has no neighboring cells on V100R001C00 impact on the the UTRAN equipment. frequency and also a higher probability of reselection to a neighboring cell on the frequency.
Radio
None
V100R001C00
Radio
None
The entering condition of event B1 is as follows: Mn + Ofn - Hys > Thresh. Where, Mn is the measurement value of neighboring cells, Ofn is the frequency-specific offset of the neighboring cell. Thresh is the threshold for event B1. Hys is the hysteresis for event The parameter B1. modification has no A smaller value of V100R001C00 impact on the Ofn results in a equipment. lower probability of triggering an event B1. This may delay the handover and affect the user experience. A larger value of Ofn leads to a higher probability of triggering an event B1, which may cause handover decision errors and ping-pong handovers. A larger value of this parameter leads to a lower probability of the UTRAN FDD cell to meet criterion S and become a suitable cell selected by a The parameter UE. A smaller value modification has no of this parameter V100R001C00 impact on the results in a higher equipment. probability. Set this parameter properly so that the selected cell can provide signals that meet the quality requirement of basic services.
Radio
None
Radio
None
A larger value of this parameter leads to a lower probability of the UTRAN cell to meet criterion S and become a suitable cell selected by a The parameter UE. A smaller value modification has no of this parameter V100R001C00 impact on the results in a higher equipment. probability. Set this parameter properly so that the selected cell can provide signals that meet the quality requirement of basic services.
Radio
None
With other conditions unchanged, a larger value of this parameter leads to The parameter a lower probability modification has no of reselection to a V100R001C00 impact on the neighboring cell on equipment. the higher-priority UTRAN frequency, and a smaller value of this parameter leads to a higher probability.
Radio
None
With other conditions unchanged, a larger value of this parameter leads to The parameter a lower probability modification has no of reselection to a V100R001C00 impact on the neighboring cell on equipment. the lower-priority UTRAN frequency, and a smaller value of this parameter leads to a higher probability.
Radio
None
Radio
None
Radio
None
V100R005C00
Radio
None
V100R005C00
Radio
N/A
N/A
None
V100R001C00
Radio
N/A
N/A
None
V100R001C00
Radio
N/A
N/A
None
V100R001C00
Radio
None
V100R001C01
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R003C00
Radio
None
V100R005C00
Radio
None
V100R001C01
Radio
None
V100R001C01
Radio
None
V100R001C01
Radio
None
V100R002C00
Radio
None
V100R001C01
Radio
None
V100R001C01
Radio
None
V100R001C01
Radio
None
V100R001C01
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C01
Radio
None
V100R004C00
Radio
None
V100R005C00
Radio
None
V100R005C00
Radio
None
V100R005C00
Radio
None
V100R005C00
Radio
None
V100R005C00
Radio
None
V100R005C00
Radio
None
V100R005C00
Radio
None
V100R005C00
Radio
None
V100R005C00
Radio
None
V100R004C00
Radio
None
V100R004C00
Radio
None
V100R004C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C01
Radio
None
The TPE algorithm, if enabled, increases the rate of TCP services; if disabled, has no impact on the network. If the TPE algorithm is enabled, the source The parameter eNodeB of a modification has no handover will V100R002C00 impact on the transmit the TCP equipment. packets stored in the TPE buffer to the target eNodeB so that the server does not need to transmit the same set of packets to the target eNodeB, increasing the rate of TCP services.
Radio
None
V100R001C00
Radio
None
V100R001C01
Radio
None
None
V100R003C00
Radio
None
V100R003C00
Radio
None
V100R003C00
Radio
None
V100R004C00
Radio
None
V100R004C00
Radio
None
V100R005C00
Radio
None
V100R005C00
Radio
None
V100R005C00
Radio
None
V100R005C00
Radio
None
V100R005C00
Radio
None
V100R005C00
Radio
None
V100R001C01
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R005C00
Radio
None
V100R005C00
Radio
None
V100R005C00
Radio
None
N/A
None
V100R001C01
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C00
Radio
None
V100R001C01
Radio
None
This switch can be turned on to prevent traffic bursts in the V100R005C00 downlink, which is caused by ACKs to uplink TCP packets.
Radio
None
If the parameter value is smaller than the data rate over the air interface, the The parameter downlink throughput modification has no will decrease. If the V100R005C00 impact on the parameter value is equipment. much greater than the data rate over the air interface, the TCP ACK control algorithm cannot take effect. A smaller value of this parameter results in better The parameter performance for the modification has no TCP ACK control V100R005C00 impact on the algorithm, and a equipment. larger value of this parameter leads to a heavier system load.
Radio
None
Radio
None
In a scenario where the TDD E-UTRAN coexists with another TDD network such as WiMAX, TDSCDMA, or PHS and the spectrums of the two networks are close to each other, strong interference may be resulted if uplink and downlink timeslots between V100R003C00 the two networks are not synchronized. This parameter is used to adjust the frame start time for all TDD E-UTRAN cells in order to ensure that the uplink and downlink timeslots of the TDD E-UTRAN cells are consistent with those of the other network.
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
The parameter modification has no None impact on the equipment. The parameter modification has no None impact on the equipment. The parameter modification has no None impact on the equipment. The parameter modification has no None impact on the equipment. The parameter modification has no None impact on the equipment. The parameter modification has no None impact on the equipment. The parameter modification has no None impact on the equipment. The parameter modification has no None impact on the equipment. The parameter modification has no None impact on the equipment. The parameter modification has no None impact on the equipment. The parameter modification has no None impact on the equipment. The parameter modification has no None impact on the equipment. The parameter modification has no None impact on the equipment.
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
None
V100R002C00
Radio
N/A
N/A
None
V100R002C00
Transport
None
V100R002C00
Transport
None
V100R002C00
Transport
None
V100R002C00
Transport
None
V100R002C00
Transport
None
V100R002C00
Transport
None
V100R002C00
Transport
None
V100R002C00
Transport
None
V100R002C00
Transport
None
V100R003C00
Transport
None
V100R003C00
Transport
None
V100R003C00
Transport
N/A
N/A
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
None
V100R005C00
Transport
None
If IPsec is applicable but this parameter is set to V100R005C00 DISABLE, the eNodeB cannot access the network.
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
N/A
N/A
None
V100R001C01
Transport
None
V100R001C01
Transport
None
If IPSec is applied to the transport The parameter network and this modification has no parameter is set to V100R001C01 impact on the DISABLE, the equipment. eNodeB cannot access the transport network.
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R002C00
Transport
None
V100R005C00
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
N/A
N/A
None
V100R005C00
Transport
None
V100R001C01
Transport
None
The eNodeB cannot access the network if this parameter is set to DISABLE and The parameter no IPSec tunnel has modification has no been set up V100R001C01 impact on the between the equipment. eNodeB and the SeGW for the SGW in an IPSecprotected network.
Transport
None
V100R001C01
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
If IPSec is applied to a network with this parameter set V100R005C00 to DISABLE, the eNodeB cannot access the network.
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
N/A
N/A
None
V100R005C00
Transport
None
V100R001C01
Transport
None
The eNodeB cannot access the network if this parameter is set to DISABLE and The parameter no IPSec tunnel has modification has no been set up V100R001C01 impact on the between the equipment. eNodeB and the SeGW for the MME in an IPSecprotected network.
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
The eNodeB cannot access the network if this parameter is set to DISABLE and The parameter no IPSec tunnel has modification has no been set up V100R001C01 impact on the between the equipment. eNodeB and the SeGW for the MME in an IPSecprotected network.
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
N/A
N/A
None
V100R001C01
Transport
None
V100R001C01
Transport
None
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R002C00
Transport
N/A
N/A
None
V100R005C00
Transport
None
V100R005C00
Transport
None
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
N/A
N/A
None
V100R005C00
Transport
None
V100R001C01
Transport
None
The eNodeB cannot access the network if this parameter is set to DISABLE and The parameter no IPSec tunnel has modification has no been set up V100R001C01 impact on the between the local equipment. eNodeB and the neighboring eNodeB in an IPSecprotected network.
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
N/A
N/A
None
V100R005C00
Transport
None
V100R001C01
Transport
None
The eNodeB cannot access the network if this parameter is set to DISABLE and The parameter no IPSec tunnel has modification has no been set up V100R001C01 impact on the between the local equipment. eNodeB and the neighboring eNodeB in an IPSecprotected network.
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
N/A
N/A
None
V100R001C01
Transport
None
V100R001C01
Transport
None
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R002C00
Transport
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
If IPv6 IPSec is used in the network but this parameter V100R005C00 is set to DISABLE, the eNodeB cannot access the network.
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R001C01
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
If IPv6 IPSec is used in the network, no IPv6 IPSec tunnel has been configured between The parameter the local eNodeB modification has no and a neighboring V100R005C00 impact on the IPv6 eNodeB, but equipment. this parameter is set to DISABLE, then handovers cannot be performed over the X2 interface.
Transport
None
If IPv6 IPSec is used in the network, no IPv6 IPSec tunnel has been configured between The parameter the local eNodeB modification has no and the IPv6 V100R005C00 impact on the SeGW, but this equipment. parameter is set to DISABLE, then handovers cannot be performed over the X2 interface.
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
If IPv6 IPSec is used in the network, no IPv6 IPSec tunnel has been configured between The parameter the local eNodeB modification has no and a neighboring V100R005C00 impact on the IPv6 eNodeB, but equipment. this parameter is set to DISABLE, then handovers cannot be performed over the X2 interface.
Transport
None
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
None
V100R005C00
Transport
None
If IPv6 IPSec is used in the network, no IPv6 IPSec tunnel has been configured between The parameter the local eNodeB modification has no and the neighboring V100R005C00 impact on the IPv6 eNodeB, but equipment. this parameter is set to DISABLE, then handovers cannot be performed over the X2 interface.
Transport
None
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
If IPv6 IPSec is used in the network, no IPv6 IPSec tunnel has been configured between The parameter the local eNodeB modification has no and the neighboring V100R005C00 impact on the IPv6 eNodeB, but equipment. this parameter is set to DISABLE, then handovers cannot be performed over the X2 interface.
Transport
None
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
If IPv6 IPSec is used in the network The parameter but this parameter modification has no is set to DISABLE, V100R005C00 impact on the user service traffic equipment. cannot be forwarded through the X2 interface.
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
N/A
N/A
None
V100R003C00
Transport
None
V100R003C00
Transport
None
V100R005C00
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R002C00
Transport
None
V100R002C00
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A N/A
N/A N/A
None None
V100R001C01 V100R001C01
Transport Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R002C00
Transport
N/A
N/A
None
V100R002C00
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R003C00
Transport
None
V100R001C01
Transport
N/A
N/A
None
V100R001C00
Transport
None
V100R001C00
Transport
N/A
N/A
None
V100R005C00
Transport
None
V100R005C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
None
V100R001C00
Transport
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
None
V100R001C00
Transport
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
The MANAME value of each CFM N/A MA must be unique in a CFM MD.
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
N/A
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A N/A
N/A N/A
None None
V100R001C01 V100R001C01
Transport Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R003C00
Transport
None
V100R003C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
None
V100R001C00
Transport
N/A
N/A
None
V100R002C00
Transport
N/A
N/A
None
V100R002C00
Transport
N/A
N/A
None
V100R002C00
Transport
N/A
N/A
None
V100R002C00
Transport
N/A
N/A
None
V100R002C00
Transport
N/A
N/A
None
V100R002C00
Transport
None
When the DHCP relay switch is enabled, the BS The parameter automatically modification has no forwards the DHCP V100R001C00 impact on the requests from the equipment. lower-level BS, which increases the load of data processing.
Transport
N/A
N/A
None
V100R001C00
Transport
None
If this parameter is set to DISABLE, a The parameter faulty remote modification has no maintenance impact on the channel cannot equipment. automatically restore itself.
V100R001C00
Transport
None
V100R001C00
Transport
None
A smaller parameter value indicates a lower transmission V100R001C00 priority of signaling data and affects the QoS.
Transport
None
A smaller parameter value indicates a The parameter lower transmission modification has no priority of high-level V100R001C00 impact on the OM service data equipment. and affects the QoS.
Transport
None
This parameter value must be different from the priorities of other The parameter services, so that lowmodification has no level OM service V100R001C00 impact on the data (such as equipment. upload and download data) is allocated the minimal bandwidth through scheduling.
Transport
None
A smaller parameter value indicates a The parameter lower transmission modification has no priority of the V100R001C01 impact on the Precision Time equipment. Protocol (PTP) packets and affects the QoS.
Transport
None
A smaller parameter value indicates a lower transmission The parameter priority of the modification has no service packet V100R001C00 impact on the whose QoS Class equipment. Indicator (QCI) is 1 and affects the QoS.
Transport
None
V100R002C00
Transport
None
V100R002C00
Transport
None
V100R002C00
Transport
None
Transport
None
V100R002C00
Transport
None
V100R002C00
Transport
None
V100R002C00
Transport
None
Transport
None
V100R002C00
Transport
None
V100R002C00
Transport
None
V100R002C00
Transport
None
Transport
None
V100R002C00
Transport
None
V100R002C00
Transport
None
V100R002C00
Transport
None
Transport
None
V100R002C00
Transport
None
V100R002C00
Transport
None
V100R002C00
Transport
None
Transport
None
V100R002C00
Transport
None
V100R002C00
Transport
None
V100R002C00
Transport
None
Transport
None
V100R002C00
Transport
None
V100R002C00
Transport
None
V100R002C00
Transport
None
Transport
None
V100R002C00
Transport
None
V100R002C00
Transport
None
V100R002C00
Transport
None
Transport
None
V100R002C00
Transport
None
V100R002C00
Transport
None
V100R002C00
Transport
None
If this parameter is set to OFF, the throughput on the air interface will The parameter drop due to modification has no overload of the V100R003C00 impact on the central processing equipment. unit (CPU) when the DL traffic on the S1 interface exceeds the capability of the LBBP.
Transport
None
If this parameter is set to OFF, the throughput on the air interface will The parameter drop due to modification has no overload of the V100R003C00 impact on the central processing equipment. unit (CPU) when the DL traffic on the S1 interface exceeds the capability of the LBBP.
Transport
N/A
N/A
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
N/A
N/A
None
V100R002C00
Transport
None
V100R002C00
Transport
N/A
N/A
None
V100R002C00
Transport
N/A
N/A
None
V100R002C00
Transport
N/A
N/A
None
V100R002C00
Transport
N/A
N/A
None
V100R002C00
Transport
N/A
N/A
None
V100R002C00
Transport
N/A
N/A
None
V100R002C00
Transport
N/A
N/A
None
V100R002C00
Transport
N/A
N/A
None
V100R005C00
Transport
None
V100R005C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
None
V100R001C01
Transport
None
V100R001C00
Transport
None
V100R001C00
Transport
None
V100R001C00
Transport
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R004C00
Transport
N/A
N/A
None
V100R004C00
Transport
N/A
N/A
None
V100R004C00
Transport
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R001C00
Transport
None
V100R001C01
Transport
None
An excessive large parameter value leads to packet loss or excessivelyfragmented data packets on the transport network, resulting in a long delay and The parameter deteriorated modification has no performance. An V100R001C00 impact on the excessive small equipment. parameter value leads to reduced available payloads for transmission, resulting in decreased transport bandwidth efficiency and deteriorated performance.
Transport
None
V100R001C00
Transport
None
V100R001C00
Transport
None
V100R001C00
Transport
None
V100R001C01
Transport
None
V100R001C00
Transport
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R004C00
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
None
V100R001C01
Transport
None
V100R001C01
Transport
N/A
N/A
None
V100R003C00
Transport
None
An excessive large parameter value leads to packet loss or excessivelyfragmented data packets on the transport network, resulting in a long delay and The parameter deteriorated modification has no performance. An V100R001C01 impact on the excessive small equipment. parameter value leads to decreased available payloads for transmission, resulting in ineffective use of the transport network bandwidth and deteriorated performance.
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R002C00
Transport
None
V100R003C00
Transport
N/A
N/A
None
V100R003C00
Transport
None
V100R003C00
Transport
None
V100R003C00
Transport
None
V100R003C00
Transport
None
V100R003C00
Transport
None
V100R003C00
Transport
N/A
N/A
None
V100R004C00
Transport
None
V100R004C00
Transport
None
V100R004C00
Transport
None
V100R004C00
Transport
None
V100R004C00
Transport
N/A
N/A
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
None
Modifications to this parameter affect the The parameter admission of new modification has no services and the V100R003C00 impact on the quality of admitted equipment. services carried on resource groups.
Transport
None
Modifications to this parameter affect the The parameter admission of new modification has no services and the V100R003C00 impact on the quality of admitted equipment. services carried on resource groups.
Transport
None
V100R005C00
Transport
None
V100R001C00
Transport
None
V100R001C00
Transport
None
V100R001C00
Transport
None
V100R003C00
Transport
N/A
V100R003C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R001C00
Transport
None
V100R001C00
Transport
The setting of this parameter must be consistent with that at the peer NE. Modifications on this parameter are not allowed.
V100R001C00
Transport
This parameter must be set to the same value as that at the peer NE.
V100R001C00
Transport
The value of this parameter must be the same as that at the peer NE.
V100R001C00
Transport
This parameter value must be the same as the peer IP address. Modifications on this parameter value are not allowed.
V100R001C00
Transport
The REMOTENAME value of the IKE peer is case insensitive and cannot contain any non-ASCII characters. The local end and peer end must have the same setting of this parameter.
V100R001C00
Transport
V100R001C00
Transport
None
V100R001C00
Transport
None
V100R001C00
Transport
None
V100R001C00
Transport
None
V100R001C00
Transport
None
V100R003C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R005C00
Transport
None
V100R005C00
Transport
The setting of this parameter must be consistent with that at the peer NE. Modifications on this parameter are not allowed.
V100R005C00
Transport
V100R005C00
Transport
V100R005C00
Transport
This parameter must be the same as the peer IP address. Modifications on this parameter are not allowed.
V100R005C00
Transport
The REMOTENAME value of the IKE peer is case insensitive and cannot contain any non-ASCII characters. The local end and peer end must have the same setting of this parameter.
V100R005C00
Transport
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
N/A
N/A
None
V100R001C00
Transport
V100R001C00
Transport
V100R001C00
Transport
V100R001C00
Transport
V100R001C00
Transport
None
V100R001C00
Transport
V100R003C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R003C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A N/A
N/A N/A
None None
V100R001C00 V100R005C00
Transport Transport
N/A
N/A
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
N/A
N/A
None
V100R002C00
Transport
N/A
N/A
None
V100R002C00
Transport
N/A
N/A
None
V100R002C00
Transport
N/A
N/A
None
V100R002C00
Transport
N/A
N/A
None
V100R002C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R002C00
Transport
N/A
N/A
None
V100R002C00
Transport
N/A
N/A
None
V100R002C00
Transport
N/A
N/A
None
V100R002C00
Transport
N/A
N/A
None
V100R002C00
Transport
N/A
N/A
None
V100R002C00
Transport
N/A
N/A
None
V100R002C00
Transport
N/A
N/A
None
V100R002C00
Transport
N/A
N/A
None
V100R002C00
Transport
N/A
N/A
None
V100R002C00
Transport
N/A
N/A
None
V100R002C00
Transport
N/A
N/A
None
V100R002C00
Transport
N/A
N/A
None
V100R002C00
Transport
N/A
N/A
None
V100R002C00
Transport
N/A
N/A
None
V100R002C00
Transport
N/A
N/A
None
V100R002C00
Transport
N/A
N/A
None
V100R001C00
Transport
None
V100R001C00
Transport
None
V100R001C00
Transport
None
V100R001C00
Transport
None
V100R001C00
Transport
None
V100R001C00
Transport
None
V100R001C00
Transport
None
V100R001C00
Transport
None
V100R001C00
Transport
None
V100R001C00
Transport
None
V100R001C00
Transport
None
V100R002C00
Transport
None
V100R001C01
Transport
If this parameter is set to DISABLE, the connectivity of an IP path cannot be checked.
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
None
V100R003C00
Transport
None
V100R002C00
Transport
None
V100R003C00
Transport
None
V100R003C00
Transport
N/A
N/A
None
V100R002C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R002C00
Transport
N/A
N/A
None
V100R002C00
Transport
N/A
N/A
None
V100R002C00
Transport
N/A
N/A
None
V100R002C00
Transport
None
V100R002C00
Transport
None
V100R002C00
Transport
If this parameter is set to DISABLE, the continuity of the IPv6 path cannot be checked.
V100R002C00
Transport
N/A
N/A
None
V100R002C00
Transport
N/A
N/A
None
V100R002C00
Transport
N/A
N/A
None
V100R002C00
Transport
N/A
N/A
None
V100R002C00
Transport
N/A
N/A
None
V100R002C00
Transport
N/A
N/A
None
V100R002C00
Transport
N/A
N/A
None
V100R002C00
Transport
None
V100R002C00
Transport
N/A
N/A
None
V100R002C00
Transport
N/A
N/A
None
V100R002C00
Transport
N/A
N/A
None
V100R002C00
Transport
N/A
N/A
None
V100R002C00
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
When this parameter is set to BIDIR, the IP PM session resource at the peer end is occupied. During the current session, N/A another IP PM session with the same DSCP that is established on the same IP path cannot be activated at the peer end.
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
None
V100R002C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R002C00
Transport
N/A
N/A
None
V100R002C00
Transport
N/A
N/A
None
V100R002C00
Transport
N/A
N/A
None
V100R002C00
Transport
N/A
N/A
None
V100R002C00
Transport
N/A
N/A
None
V100R002C00
Transport
None
V100R002C00
Transport
N/A
N/A
None
V100R002C00
Transport
None
V100R002C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
N/A
N/A
None
V100R004C00
Transport
None
V100R004C00
Transport
None
V100R004C00
Transport
None
V100R004C00
Transport
None
V100R004C00
Transport
None
V100R004C00
Transport
None
V100R004C00
Transport
N/A
N/A
None
V100R004C00
Transport
The SPGN value is case insensitive. When the SPGN value is referenced, however, the name of the policy group N/A must be exactly the same as the configured one. Otherwise, the related operation fails.
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
None
V100R001C00
Transport
None
V100R001C01
Transport
N/A
N/A
None
V100R001C00
Transport
V100R001C00
Transport
None
V100R001C00
Transport
None
V100R001C00
Transport
None
V100R001C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R003C00
Transport
None
V100R005C00
Transport
The SPGN value is case insensitive. When the SPGN value is referenced, however, the name of the policy group N/A must be the same as the configured one. Otherwise, the related operation fails.
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
The referenced value of this parameter must be exactly the same as N/A the configured name. Otherwise, the related operation fails.
None
V100R001C00
Transport
V100R001C00
Transport
V100R001C00
Transport
V100R001C00
Transport
V100R001C00
Transport
V100R001C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R002C00
Transport
N/A
N/A
None
V100R002C00
Transport
N/A
N/A
None
V100R002C00
Transport
N/A
N/A
None
V100R002C00
Transport
N/A
N/A
None
V100R002C00
Transport
N/A
N/A
None
V100R002C00
Transport
None
V100R001C00
Transport
None
V100R001C00
Transport
None
V100R002C00
Transport
None
V100R002C00
Transport
N/A
N/A
None
V100R002C00
Transport
N/A
N/A
None
V100R002C00
Transport
N/A
N/A
None
V100R002C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
None
If this parameter is set to ENABLE, the rate of a physical port is restricted. If this parameter is set to DISABLE, the rate of a physical port is not restricted.Rate The parameter restriction of modification has no physical ports is V100R001C00 impact on the necessary if the equipment. bandwidth of a transport network is limited. The transport network may incur congestion or packet loss when its bandwidth is limited and rate restriction is disabled.
Transport
None
If this parameter value is greater than the available transport bandwidth, the transport network may be congested, affecting the QoS. The parameter If this parameter modification has no value is smaller V100R001C00 impact on the than the available equipment. transport bandwidth, the transport network may incur a waste of bandwidth, affecting the number of admitted services and throughput.
Transport
None
A smaller parameter value indicates a lower tolerance for data burst, which results in packet The parameter loss. modification has no A larger parameter V100R001C00 impact on the value indicates equipment. higher consumption of system resources, which results in a waste of resources.
Transport
None
V100R001C00
Transport
N/A
N/A
None
V100R003C00
Transport
None
V100R003C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
Enabling the Pointto-Point Protocol (PPP) multiplexing function leads to V100R001C00 higher bandwidth usage and a longer delay for data transmission. None V100R001C00
Transport
N/A
N/A
Transport
N/A
N/A
A smaller parameter value indicates a smaller number of frames available for multiplexing, resulting in a lower multiplexing ratio. A larger parameter V100R001C00 value indicates a larger number of frames available for multiplexing but a lower multiplexing ratio, resulting in inadequate multiplexing. A larger parameter value indicates a larger number of multiplexed frames and a higher multiplexing efficiency, resulting in a longer delay caused by V100R001C00 multiplexing. A smaller parameter value indicates a smaller number of multiplexed frames, resulting in a shorter delay caused by multiplexing.
Transport
N/A
N/A
Transport
N/A
N/A
A smaller parameter value indicates a smaller number of multiplexed frames and lower bandwidth usage, resulting in a short delay. A larger parameter value indicates a V100R001C00 large number of multiplexed frames if the maximum multiplexed frame length is not considered. In this case, the bandwidth usage is higher, resulting in a longer delay.
Transport
N/A
N/A
None.
V100R001C00
Transport
N/A
N/A
After this parameter is set to ENABLE, the IP header compression is enabled, which improves bandwidth V100R001C00 usage, increases data processing loads, and decreases the throughput.
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A N/A N/A
N/A N/A N/A
None None None
V100R001C00 V100R001C00 V100R001C00
Transport Transport Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
A smaller parameter value indicates smaller received V100R001C00 data units and more data fragments, affecting the QoS.
Transport
N/A
N/A
After the Protocol Field Compression (PFC) function is enabled, the bandwidth usage is V100R001C00 improved, which results in higher system loads and a longer delay. After the Address and Control Field Compression (ACFC) function is enabled, the V100R001C00 bandwidth usage is improved, which results in higher system loads and a longer delay.
Transport
N/A
N/A
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R001C00
Transport
None
V100R001C00
Transport
None
V100R001C00
Transport
None
V100R001C00
Transport
None
V100R001C00
Transport
None
V100R001C00
Transport
None
V100R001C00
Transport
None
V100R001C00
Transport
None
V100R001C00
Transport
None
V100R001C00
Transport
None
V100R001C00
Transport
None
V100R001C00
Transport
None
V100R001C00
Transport
None
V100R001C00
Transport
None
V100R001C00
Transport
None
V100R001C00
Transport
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
None
V100R003C00
Transport
N/A
N/A
None
V100R002C00
Transport
None
V100R002C00
Transport
N/A
N/A
None
V100R002C00
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R003C00
Transport
None
N/A
None
V100R003C00
Transport
None
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
N/A
N/A
None
V100R002C00
Transport
N/A
N/A
None
V100R002C00
Transport
N/A
N/A
None
V100R002C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R002C00
Transport
N/A
N/A
None
V100R002C00
Transport
None
V100R002C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
The password must not contain the following N/A characters: <, >, !, ?, and :.
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
Enabling the Pointto-Point Protocol (PPP) multiplexing function leads to V100R001C00 higher bandwidth usage and a longer delay for data transmission.
Transport
N/A
N/A
A smaller parameter value indicates a smaller number of frames available for multiplexing, resulting in a lower multiplexing ratio. A larger parameter value indicates a V100R001C00 larger number of frames available for multiplexing but a lower multiplexing ratio, resulting in a low impact of the multiplexing algorithm. A larger parameter value indicates a larger number of multiplexed frames and a higher multiplexing efficiency, resulting in a longer delay caused by V100R001C00 multiplexing. A smaller parameter value indicates a smaller number of multiplexed frames, resulting in a shorter delay caused by multiplexing.
Transport
N/A
N/A
Transport
N/A
N/A
A smaller parameter value indicates a smaller number of multiplexed frames and lower bandwidth usage, resulting in a short delay. A larger parameter value indicates a V100R001C00 large number of multiplexed frames if the maximum multiplexed frame length is not considered. In this case, the bandwidth usage is higher, resulting in a longer delay. After this parameter is set to ENABLE, the IP header compression is performed, resulting V100R001C00 in higher bandwidth usage and line quality requirements. A smaller parameter value indicates smaller received V100R001C00 data units and more data fragments, affecting the QoS.
Transport
N/A
N/A
Transport
N/A
N/A
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
After the Address and Control Field Compression (ACFC) function is enabled, the V100R001C00 bandwidth usage is improved, which results in higher system loads and a longer delay.
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R003C00
Transport
None
None
A lower priority of the real-time service queue leads to the preemption of nonreal-time services by excessive realtime-services. A higher priority of The parameter real-time service modification has no queue leads to V100R001C00 impact on the degrading of realequipment. time services to the non-real-time service queue, resulting in the preemption of realtime services by non-real-time services. A lower priority of the real-time service queue leads to the preemption of nonreal-time services by excessive realtime-services. A higher priority of The parameter real-time service modification has no queue leads to V100R001C00 impact on the degrading of realequipment. time services to the non-real-time service queue, resulting in the preemption of realtime services by non-real-time services.
Transport
Transport
None
None
Transport
Transport
None
None
Transport
Transport
None
A lower priority of the real-time service queue leads to the preemption of nonreal-time services by excessive realtime-services. A higher priority of The parameter real-time service modification has no queue leads to V100R001C00 impact on the degrading of realequipment. time services to the non-real-time service queue, resulting in the preemption of realtime services by non-real-time services.
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R003C00
Transport
None
V100R003C00
Transport
None
Transport
None
Transport
None
A smaller parameter value indicates a lower tolerance for data burst, which results in packet The parameter loss. modification has no A larger parameter V100R003C00 impact on the value indicates equipment. higher consumption of system resources, which results in a waste of resources.
Transport
None
V100R003C00
Transport
N/A
N/A
None
V100R002C00
Transport
None
V100R003C00
Transport
None
If this parameter value is greater than the guaranteed transport bandwidth for uplink, packet loss is easy to occur on non-flow-control services, affecting the QoS of these services. The parameter If this parameter modification has no value is smaller V100R003C00 impact on the than the guaranteed equipment. transport bandwidth for uplink, bandwidth waste may occur on the transport network, affecting the number of admitted non-flow-control services and the BS throughput in the uplink.
Transport
None
If this parameter value is greater than the guaranteed transport bandwidth for downlink, packet loss is easy to occur on non-flow-control services, affecting the QoS of these services. The parameter If this parameter modification has no value is smaller V100R003C00 impact on the than the guaranteed equipment. transport bandwidth for downlink, bandwidth waste may occur on the transport network, affecting the number of admitted non-flow-control services and the BS throughput in the uplink. If this parameter value is greater than the maximum transport bandwidth for uplink, packet loss is easy to occur on the transport network, affecting the QoS of services. The parameter If this parameter modification has no value is smaller V100R003C00 impact on the than the maximum equipment. transport bandwidth for uplink, bandwidth waste may occur on the transport network, affecting the number of admitted services and the BS throughput in the uplink.
Transport
None
Transport
None
If this parameter value is greater than the maximum transport bandwidth for downlink, packet loss is easy to occur on the transport network, affecting the QoS of services. The parameter If this parameter modification has no value is smaller V100R003C00 impact on the than the maximum equipment. transport bandwidth for downlink, bandwidth waste may occur on the transport network, affecting the number of admitted services and the BS throughput in the uplink.
Transport
None
A larger parameter The parameter value indicates a modification has no greater amount of impact on the permitted burst equipment. data.
V100R003C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R005C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R003C00
Transport
N/A
N/A
None
V100R003C00
Transport
None
V100R001C00
Transport
None
If this parameter is set to ON, packet loss can be reduced by adjusting the TX bandwidth of the The parameter transport network. modification has no If this parameter is V100R001C00 impact on the set to OFF, the equipment. bandwidth and TX rate is not adjusted due to packet loss on the transport network.
Transport
None
If this parameter is set to ON, packet loss is reduced by adjusting the RX bandwidth of the The parameter transport network. modification has no If this parameter is V100R001C00 impact on the set to OFF, the equipment. bandwidth and RX rate is not adjusted due to packet loss on the transport network.
Transport
None
A smaller parameter value indicates a higher probability of detecting congestion on the transport network and being affected by packet loss due to transport network The parameter errors, which leads modification has no to a mistaken rate V100R001C00 impact on the decrease. equipment. A larger parameter value indicates a lower probability of detecting congestion on the transport network and being affected by packet loss due to transport network errors.
Transport
None
A smaller parameter value indicates a higher probability of detecting congestion on the transport network and being affected by delay jitter when the transport network is not congested, which The parameter may lead to a modification has no mistaken rate V100R001C00 impact on the decrease. equipment. A larger parameter value indicates a lower probability of detecting congestion on the transport network and being affected by delay jitter when the transport network is not congested.
Transport
None
The minimum TX bandwidth that the adjustment can achieve has a positive correlation with the value of this parameter. That is, if this parameter The parameter is set to a smaller modification has no value, the minimum V100R001C00 impact on the TX bandwidth that equipment. the adjustment can achieve is smaller; if this parameter is set to a larger value, the minimum TX bandwidth that the adjustment can achieve is larger.
Transport
None
The minimum RX bandwidth that the adjustment can achieve has a positive correlation with the value of this parameter. That is, if this parameter The parameter is set to a smaller modification has no value, the minimum V100R001C00 impact on the RX bandwidth that equipment. the adjustment can achieve is smaller; if this parameter is set to a larger value, the minimum RX bandwidth that the adjustment can achieve is larger.
Transport
None
If this parameter is set to ENABLE, the transport resource group will not be congested, guaranteeing the fairness and differentiation of The parameter non-real-time modification has no services. V100R001C00 impact on the If this parameter is equipment. set to DISABLE, the transport resource group may be congested, affecting the fairness and differentiation of non-real-time services.
Transport
None
If this parameter is set to ENABLE, the OM FTP services may preempt the The parameter bandwidth of nonmodification has no real-time services. V100R001C00 impact on the If this parameter is equipment. set to DISABLE, only a low bandwidth is guaranteed for OM FTP services.
Transport
None
All real-time services belong to the Priority Queuing The parameter (PQ) queue. modification has no Otherwise, the high V100R001C00 impact on the priority of equipment. transmitting realtime services is not guaranteed.
Transport
None
A smaller parameter value indicates a higher probability of the TX rate change of the transport The parameter resource group but modification has no a shorter delay. V100R001C00 impact on the A larger parameter equipment. value indicates a lower probability of the TX rate change of the transport resource group but a longer delay.
Transport
None
A smaller parameter value indicates a better differentiation effect for bandwidth allocation of nonreal-time services. This, however, leads to a higher probability of emptying the buffer of the transport resource group and affects the The parameter bandwidth usage. modification has no A larger parameter V100R001C00 impact on the value indicates a equipment. worse differentiation effect for bandwidth allocation of nonreal-time services. This, however, leads to a lower probability of emptying the buffer of the transport resource group and is unlikely to affect the bandwidth usage. If this parameter is set to an excessively great value, some UL bandwidths are wasted and the system capacity The parameter decreases. modification has no If this parameter is V100R001C01 impact on the set to an equipment. excessively small value, the actrual transmission load will exceed the UL available bandwidth, affecting the quality of admitted services.
Transport
None
Transport
None
If this parameter is set to an excessively great value, some DL bandwidths are wasted and the system capacity The parameter decreases. modification has no If this parameter is V100R001C01 impact on the set to an equipment. excessively small value, the actrual transmission load will exceed the DL available bandwidth, affecting the quality of admitted services.
Transport
None
A greater value indicates a larger The parameter capability of the modification has no queue in a impact on the transmission equipment. resource group to buffer packets.
V100R001C01
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
None
V100R001C00
Transport
None
V100R001C00
Transport
None
V100R001C00
Transport
None
V100R001C00
Transport
None
V100R001C00
Transport
None
V100R001C00
Transport
None
V100R001C00
Transport
None
V100R001C00
Transport
None
V100R001C00
Transport
None
V100R001C00
Transport
None
V100R001C00
Transport
None
V100R001C00
Transport
None
V100R001C00
Transport
None
V100R001C00
Transport
None
V100R001C00
Transport
None
V100R001C00
Transport
None
V100R001C00
Transport
None
V100R001C00
Transport
None
V100R001C00
Transport
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C01
Transport
None
V100R003C00
Transport
None
V100R002C00
Transport
N/A
N/A
None
V100R002C00
Transport
None
V100R002C00
Transport
None
V100R002C00
Transport
None
V100R002C00
Transport
None
V100R002C00
Transport
None
V100R002C00
Transport
None
V100R002C00
Transport
None
V100R002C00
Transport
None
V100R002C00
Transport
None
V100R002C00
Transport
None
V100R002C00
Transport
None
V100R002C00
Transport
None
V100R002C00
Transport
None
V100R002C00
Transport
None
V100R002C00
Transport
None
V100R002C00
Transport
None
V100R002C00
Transport
None
V100R002C00
Transport
None
V100R002C00
Transport
N/A
N/A
None
V100R002C00
Transport
N/A
N/A
None
V100R002C00
Transport
N/A
N/A
None
V100R002C00
Transport
N/A
N/A
None
V100R002C00
Transport
N/A
N/A
None
V100R002C00
Transport
N/A
N/A
None
V100R002C00
Transport
N/A
N/A
None
V100R002C00
Transport
None
V100R002C00
Transport
N/A
N/A
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
None
V100R005C00
Transport
None
If this parameter is set to ON, admission decision for handover services or new services depends on uplink transport resources. This prevents excessive service admission and ensures the quality of admitted The parameter services. modification has no If this parameter is V100R001C00 impact on the set to OFF, equipment. admission decision for handover services or new services does not depend on uplink transport resources. Therefore, the QoS of ongoing services cannot be ensured if excessive services are admitted. If this parameter is set to ON, admission decision for handover services or new services depends on downlink transport resources. This prevents excessive service admission and ensures the quality The parameter of admitted modification has no services. V100R001C00 impact on the If this parameter is equipment. set to OFF, admission decision for handover services or new services does not depend on downlink transport resources. Therefore, the QoS of ongoing services cannot be ensured if excessive services are admitted.
Transport
None
Transport
None
A smaller parameter value indicates a larger number of admitted services and a lower probability of ensuring sufficient The parameter bandwidth for modification has no ongoing services. V100R001C00 impact on the A larger parameter equipment. value indicates a smaller number of admitted services and a higher probability of ensuring sufficient bandwidth for ongoing services. A smaller parameter value indicates a larger number of admitted services and a lower probability of ensuring sufficient The parameter bandwidth for modification has no ongoing services. V100R001C00 impact on the A larger parameter equipment. value indicates a smaller number of admitted services and a higher probability of ensuring sufficient bandwidth for ongoing services.
Transport
None
Transport
None
A smaller parameter value indicates a larger number of admitted services and a lower probability of ensuring sufficient The parameter bandwidth for modification has no ongoing services. V100R001C00 impact on the A larger parameter equipment. value indicates a smaller number of admitted services and a higher probability of ensuring sufficient bandwidth for ongoing services. A smaller parameter value indicates a larger number of admitted services and a lower probability of ensuring sufficient The parameter bandwidth for modification has no ongoing services. V100R001C00 impact on the A larger parameter equipment. value indicates a smaller number of admitted services and a higher probability of ensuring sufficient bandwidth for ongoing services.
Transport
None
Transport
None
A smaller value indicates a larger number of admitted services but a smaller probability of ensuring the sufficient bandwidth The parameter for ongoing modification has no services. V100R001C00 impact on the A larger value equipment. indicates a smaller number of admitted services but a greater probability of ensuring the sufficient bandwidth for ongoing services. A less parameter value indicates that more services can be admitted. The possibility that bandwidth for services is not The parameter ensured, however, modification has no becomes great. V100R001C00 impact on the A greater parameter equipment. value indicates that fewer services can be admitted. The possibility that bandwidth for services is not ensured, however, becomes less.
Transport
None
Transport
None
A less parameter value indicates that more services can be admitted. The possibility that bandwidth for services is not The parameter ensured, however, modification has no becomes great. V100R001C00 impact on the A greater parameter equipment. value indicates that fewer services can be admitted. The possibility that bandwidth for services is not ensured, however, becomes less. A less parameter value indicates that more services can be admitted. The possibility that bandwidth for services is not The parameter ensured, however, modification has no becomes great. V100R001C00 impact on the A greater parameter equipment. value indicates that fewer services can be admitted. The possibility that bandwidth for services is not ensured, however, becomes less.
Transport
None
Transport
None
A less parameter value indicates that more services can be admitted. The possibility that bandwidth for services is not The parameter ensured, however, modification has no becomes great. V100R001C00 impact on the A greater parameter equipment. value indicates that fewer services can be admitted. The possibility that bandwidth for services is not ensured, however, becomes less. A larger value indicates a higher admission success rate of handover services but a greater probability of overloaded transport due to the actual traffic The parameter fluctuation of realmodification has no time services. V100R002C00 impact on the A smaller value equipment. indicates a lower admission success rate of handover services but a smaller probability of overloaded transport due to the traffic fluctuation of real-time services.
Transport
None
Transport
None
A larger value indicates a higher admission success rate of handover services but a greater probability of overloaded transport due to the actual traffic The parameter fluctuation of realmodification has no time services. V100R002C00 impact on the A smaller value equipment. indicates a lower admission success rate of handover services but a smaller probability of overloaded transport due to the traffic fluctuation of real-time services. A larger value indicates a higher admission success rate of gold-level new services but a smaller UL bandwidth reserved for handover services and less effect of The parameter differentiating modification has no admitted services. V100R002C00 impact on the A smaller value equipment. indicates a lower admission success rate of gold-level new services but a greater UL bandwidth reserved for handover services and more effect of differentiating admitted services.
Transport
None
Transport
None
A larger value indicates a higher admission success rate of gold-level new services but a smaller DL bandwidth reserved for handover services and less effect of The parameter differentiating modification has no admitted services. V100R002C00 impact on the A smaller value equipment. indicates a lower admission success rate of gold-level new services but a greater DL bandwidth reserved for handover services and more effect of differentiating admitted services. A larger value indicates a higher admission success rate of silver-level new services but a smaller UL bandwidth reserved for gold-level new services and less effect of The parameter differentiating modification has no admitted services. V100R002C00 impact on the A smaller value equipment. indicates a lower admission success rate of silver-level new services but a greater UL bandwidth reserved for gold-level new services and more effect of differentiating admitted services.
Transport
None
Transport
None
A larger value indicates a higher admission success rate of silver-level new services but a smaller DL bandwidth reserved for gold-level new services and less effect of The parameter differentiating modification has no admitted services. V100R002C00 impact on the A smaller value equipment. indicates a lower admission success rate of silver-level new services but a greater DL bandwidth reserved for gold-level new services and more effect of differentiating admitted services. A larger value indicates a higher admission success rate of bronze-level new services but a smaller UL bandwidth reserved for silver-level new services and less effect of The parameter differentiating modification has no admitted services. V100R002C00 impact on the A smaller value equipment. indicates a lower admission success rate of bronze-level new services but a greater UL bandwidth reserved for silver-level new services and more effect of differentiating admitted services.
Transport
None
Transport
None
A larger value indicates a higher admission success rate of bronze-level new services but a smaller DL bandwidth reserved for silver-level new services and less effect of The parameter differentiating modification has no admitted services. V100R002C00 impact on the A smaller value equipment. indicates a lower admission success rate of bronze-level new services but a greater DL bandwidth reserved for silver-level new services and more effect of differentiating admitted services. A greater value of this parameter indicates a greater UL admission bandwidth for GBR services and a higher admission success rate of GBR services but a smaller UL bandwidth reserved The parameter for non-GBR modification has no services. V100R002C00 impact on the A smaller value of equipment. this parameter indicates a smaller UL admission bandwidth for GBR services and a lower admission success rate of GBR services but a greater UL bandwidth reserved for non-GBR services.
Transport
None
Transport
None
A greater value of this parameter indicates a greater DL admission bandwidth for GBR services and a higher admission success rate of GBR services but a smaller DL bandwidth reserved The parameter for non-GBR modification has no services. V100R002C00 impact on the A smaller value of equipment. this parameter indicates a smaller DL admission bandwidth for GBR services and a lower admission success rate of GBR services but a greater DL bandwidth reserved for non-GBR services.
Transport
None
If the UL transport bandwidth is insufficient and this parameter is set to ON, the admission success rate of highpriority services may rise, but the call drop rate of lowpriority services The parameter may also increase. modification has no If the UL transport V100R002C00 impact on the bandwidth is equipment. insufficient and this parameter is set to OFF, the call drop rate of low-priority services is not affected, but the admission success rate of high-priority services is not guaranteed.
Transport
None
If this parameter is set to ON when the DL transport bandwidth is insufficient, the admission success rate of high-priority services increases. The service drop rate of low-priority services, however, The parameter also increases. modification has no If this parameter is V100R002C00 impact on the set to OFF when the equipment. DL transport bandwidth is insufficient, the admission success rate of high-priority services might not increase. The service drop rate of low-priority services, however, is not affected.
Transport
None
If this parameter is set to ON, the sum of uplink admission bandwidths of all logical ports carried on a physical port is allowed to be greater than the uplink bandwidth of the physical port. In this case, however, there is a risk of excessive admitted services if PORTULCACSW is The parameter set to ON. modification has no If this parameter is V100R003C00 impact on the set to OFF, the sum equipment. of uplink admission bandwidths of all logical ports carried on a physical port is not allowed to be greater than the uplink bandwidth of the physical port. In this case, there is no risk of excessive admitted services regardless of whether PORTULCACSW is set to ON.
Transport
None
If this parameter is set to ON, the sum of downlink admission bandwidths of all logical ports carried on a physical port is allowed to be greater than the downlink bandwidth of the physical port. In this case, however, there is a risk of excessive admitted services if The parameter PORTDLCACSW is modification has no set to ON. V100R003C00 impact on the If this parameter is equipment. set to OFF, the sum of downlink admission bandwidths of all logical ports carried on a physical port is not allowed to be greater than the downlink bandwidth of the physical port. In this case, there is no risk of excessive admitted services regardless of whether PORTDLCACSW is
Transport
None
V100R003C00
Transport
None
V100R003C00
Transport
None
V100R002C00
Transport
None
V100R002C00
Transport
None
V100R002C00
Transport
None
V100R002C00
Transport
None
V100R002C00
Transport
None
V100R002C00
Transport
None
V100R002C00
Transport
None
V100R002C00
Transport
None
V100R003C00
Transport
None
If this parameter is set to ON, the quality of highpriority services is guaranteed when the transport network is The parameter overloaded with modification has no uplink services. impact on the If this parameter is equipment. set to OFF, the quality of highpriority services is guaranteed when the transport network is overloaded with uplink services.
V100R001C00
Transport
None
If this parameter is set to ON, the quality of highpriority services is guaranteed when the transport network is overload The parameter with downlink modification has no services. V100R001C00 impact on the If this parameter is equipment. set to OFF, the quality of highpriority services is not guaranteed when the transport network is overloaded with downlink services.
Transport
None
A larger parameter value indicates a lower probability of triggering the UL transport overload algorithm, ensuring the bandwidth of high-priority services, and The parameter releasing lowmodification has no priority services. V100R001C00 impact on the A smaller parameter equipment. value indicates a higher probability of triggering the UL transport overload algorithm, ensuring the bandwidth of high-priority services, and releasing lowpriority services. A larger parameter value indicates a smaller number of services released by OLC and a higher probability of The parameter OLC ping-pong modification has no operations. V100R001C00 impact on the A smaller parameter equipment. value indicates a larger number of services released by OLC and a lower probability of OLC ping-pong operations.
Transport
None
Transport
None
A smaller parameter value indicates a longer time to clear the overload state and a lower probability of The parameter releasing services modification has no excessively. V100R001C00 impact on the A larger parameter equipment. value indicates a shorter time to clear the overload state and a higher probability of releasing services excessively. A larger parameter value indicates a lower probability of triggering the DL transport overload algorithm, ensuring the bandwidth of high-priority services, and The parameter releasing lowmodification has no priority services. V100R001C00 impact on the A smaller parameter equipment. value indicates a higher probability of triggering the DL transport overload algorithm, ensuring the bandwidth of high-priority services, and releasing lowpriority services.
Transport
None
Transport
None
A larger parameter value indicates a smaller number of services released by OLC and a higher probability of The parameter OLC ping-pong modification has no operations. V100R001C00 impact on the A smaller parameter equipment. value indicates a larger number of services released by OLC and a lower probability of OLC ping-pong operations.
Transport
None
V100R002C00
Transport
N/A
N/A
None
V100R004C00
Transport
N/A
N/A
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
N/A
N/A
None
V100R005C00
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C01
Transport
N/A
N/A
None
V100R001C00
Transport
None
The parameter modification has no None impact on the equipment. The parameter modification has no impact on the equipment.
V100R001C00
Transport
None
A smaller parameter value indicates a lower priority of the V100R001C00 data transmission in layer 2 and affects the QoS.
Transport
N/A
N/A
None
V100R001C00
Transport
N/A
N/A
None
V100R001C01
Transport
None
V100R001C00
Transport
None
V100R001C00
Transport
None
A smaller parameter The parameter value indicates a modification has no lower priority of data V100R001C00 impact on the transmission and equipment. affects the QoS.
Transport
None
V100R001C00
Transport
None
V100R003C00
Transport
None
A larger value of this parameter makes ECHO frame timeout less vulnerable to network delay, but it leads to a longer time required to detect disconnection and The parameter therefore a higher modification has no probability of longV100R001C01 impact on the time packet loss. A equipment. smaller value of this parameter results in a higher probability of detecting network status, but it leads to higher sensitivity to packet loss and delay and therefore a higher probability of incorrect decisions. A larger value of this parameter makes ECHO frame timeout less vulnerable to network delay, but it leads to a longer time required to detect disconnection and The parameter therefore a higher modification has no probability of longV100R001C01 impact on the time packet loss. A equipment. smaller value of this parameter results in a higher probability of detecting network status, but it leads to higher sensitivity to packet loss and delay and therefore a higher probability of incorrect decisions.
Transport
None
Transport
None
A larger value of this parameter makes ECHO frame timeout less vulnerable to network delay, but it leads to a longer time required to detect disconnection and The parameter therefore a higher modification has no probability of longV100R001C01 impact on the time packet loss. A equipment. smaller value of this parameter results in a higher probability of detecting network status, but it leads to higher sensitivity to packet loss and delay and therefore a higher probability of incorrect decisions.
Transport
None
V100R001C01
Transport

Parameter Reference

Hochgeladen von

Dokumentinformationen

Copyright

Verfügbare Formate

Dieses Dokument teilen

Dokument teilen oder einbetten

Freigabeoptionen

Stufen Sie dieses Dokument als nützlich ein?

Sind diese Inhalte unangemessen?

Copyright:

Verfügbare Formate

Parameter Reference

Hochgeladen von

Copyright:

Verfügbare Formate

eNodeB V100R005C00

HUAWEI TECHNOLOGIES CO., LTD.

Copyright Huawei Technologies Co., Ltd. 2012. All rights reserved.

Trademarks and Permissions

Huawei Technologies Co., Ltd.

ans without prior written consent of Huawei

their respective holders.

Parameter Attribute Description

Initial Value Source

eter changes, see the release notes.

t the parameters related to northbound interface interconnection, see the

is introduced. meter, a transport parameter, or an equipment parameter.

Connect RRU cabinet No.

Connect RRU subrack No.

Connect RRU slot No.

Antenna model number

Element Beamform eNodeB Width

Amplitude Offset of Physical Port 1 for eNodeB CRS2

Phase of Physical Port 1 for CRS2

Amplitude Offset of Physical Port 2 for eNodeB CRS2

Phase of Physical Port 2 for CRS2

Amplitude Offset of Physical Port 3 for eNodeB CRS2

Phase of Physical Port 3 for CRS2

Amplitude Offset of Physical Port 4 for eNodeB CRS2

Phase of Physical Port 4 for CRS2

Amplitude Offset of Physical Port 1 for eNodeB CRS4

Phase of Physical Port 1 for CRS4

Amplitude Offset of Physical Port 2 for eNodeB CRS4

Phase of Physical Port 2 for CRS4

MOD ENODEB DSP ENODEB LST ENODEB

MOD ENODEB LST ENODEB

MOD ENODEB LST ENODEB

AUTOPOWEROFF Auto power control SWITCH switch

MOD ENODEB LST ENODEB

Auto power off time eNodeB

MOD ENODEB LST ENODEB

Auto power on time eNodeB

MOD ENODEB LST ENODEB

MOD ENODEB LST ENODEB

MOD ENODEB LST ENODEB

Electronic Serial Number

eNodeB eNodeB autopoweroff status

MOD ENODEB LST ENODEB

Geo-coordinate data format

MOD ENODEB LST ENODEB

Latitude with second format

MOD ENODEB LST ENODEB

LONGITUDESECF Longitude with ORMAT second format

MOD ENODEB LST ENODEB

MOD ENODEB LST ENODEB

LST KPIALARM MOD KPIALARM

MOD KPIALARM LST KPIALARM

MOD KPIALARM LST KPIALARM

MOD KPIALARM LST KPIALARM

MOD KPIALARM LST KPIALARM

MOD KPIALARM LST KPIALARM

MOD KPIALARM LST KPIALARM

ADD SECTOR MOD SECTOR LST SECTOR

ADD SECTOR MOD SECTOR LST SECTOR

ADD SECTOR MOD SECTOR LST SECTOR

ADD SECTOR MOD SECTOR LST SECTOR

ADD SECTOR MOD SECTOR LST SECTOR

Cabinet No. of the RRU where antenna port 1 is located

ADD SECTOR MOD SECTOR LST SECTOR