Beruflich Dokumente
Kultur Dokumente
Pre-hardened Plastic Mould Steel with Good Machinability C : 0.40 Cr : 1.9 S : 0.05
(Typical Values)
Chemical Analysis, %
Mn : 1.5 Mo : 0.2
Steel Properties Applications
Mould steel with excellent workability. Improved machinability compared to 2311 (controlled sulfur content). Polishable Plastic moulds, core parts for injection moulding and compression moulding subject to no special finishing requirements. High and low pressure casting dies Pre-hardened Hardness Supplied 28-32 HRC
Delivery Condition
AISI P 20 S
WN 1.2312
DIN 40CrMnS86
Hardness HB Max 235
Soft Annealing C 710 - 740 Stress Relieving C Approx. 600 Hardening C 840 - 870
Tempering C
100
200 50
300 48
400 46
500 42
600 36
700 28
Hardness HRC 51
Time temperature-transformation Diagram
Tempering Diagram
Revision 1.0