Beruflich Dokumente
Kultur Dokumente
Exam I (2/22/2013)
Exam I
Name: _____________Solutions_______________ ID: _______________________
1. This exam consists of three (3) problems and one bonus problems. 2. Some problems have multiple parts. 3. Be sure to carefully read and properly analyze each question that is asked. Do not jump to unfounded conclusions, but also do not overlook or oversimplify problems either. 4. Be sure to show all necessary work, including sketches, Free Body Diagrams, and calculations, and organize your solution procedures as clearly and systematically as possible. 5. Work problems in the space provided on the exam sheets. 6. Work efficiently, neatly, and use pencil. 7. Clearly indicate final answers by enclosing in a box. Include any and all appropriate units. Problem 1: ____________/10 Problem 2: ____________/10 Problem 3: ____________/10 Bonus problems: ____________/3
Total:
____________/30
Exam I (2/22/2013)
Problem 1: If cable CB is subjected to a tension that is twice that of cable CA, determine the angle for equilibrium of the 10 lb cylinder. Also what are the tensions in wires CA and CB.
Exam I (2/22/2013)
Problem 2. Determine the resultant moment produced by the forces about point O.
Exam I (2/22/2013)
Problem 3. The hood of the automobile is supported by the strut AB, which exerts a force F on the hood. Determine the moment of this force about the hinged axis y. Given:
F = 24 lb a = 2 ft b = 4 ft c = 2 ft d = 4 ft
Exam I (2/22/2013)
Bonus Problem. Determine the magnitude of F so that the resultant couple moment acting on the beam is 1.5 kNm clockwise. (You must find the correct answer to get the bonus; no partial score)