Beruflich Dokumente
Kultur Dokumente
0.388*
P12 USB Slot Slot Slot Slot Slot Slot Slot Slot Slot Slot
1.225*
Ports 1.393*
A1 B1 C1 C2 D1 D2 E1 E2 F1 F2
P11 PCIe1 PCIe2
PCIeS
x4 PCIe Link
(expansion)
x8 mech
x4 elect. 6.325
Trenton Technology Inc. 2350 Centennial Drive, Gainesville, Georgia 30504 Sales: (800) 875-6031 Phone: (770) 287-3100 Fax: (770) 287-3150
E-mail: Sales@TrentonTechnology.com Web: www.TrentonTechnology.com
OPTIONAL USB 2.0 INTERFACES CONNECTING POWER
The SHB Express specification defines optional I/O routings from The combination of new power supply technologies, soft-power
the SHB to the backplane. Trenton’s BPX6620 takes advantage control signals available via the Advanced Configuration and
of this new specification feature by providing two USB 2.0 Power Interface (ACPI) now supported by PICMG 1.3 SHBs and
headers capable of providing up to four USB 2.0 backplane ports. auxiliary power connectors on PICMG 1.3 backplanes that deliver
Server-class system host board support for the USB port all of the SHBs power to the edge connectors are requiring a
connections to a backplane is optional. Refer to the SHB different approach to connecting system power.
OPTIONAL BACKPLANE I/O SUPPORT TABLE below for an Auxiliary power connectors on the backplane are provided to help
explanation of the backplane I/O capabilities supported by improve system Mean Time To Repair (MTTR). All power can be
Trenton’s PICMG 1.3 Server-class SHBs or contact Trenton for delivered to the SHB via the board’s edge connectors. Trenton’s
additional information and SHB product updates. PICMG 1.3 SHBs and backplane SHB edge connector slots have
OPTIONAL ETHERNET INTERFACES ample power pins available to meet the power demands of high-
Trenton’s BPX6620 backplane supports the optional Ethernet performance, performance-based processor SHBs like the
routing feature of the SHB Express (PICMG 1.3) specification. Trenton NLT. The ATX/EPS and +12V power connectors on the
Two 10/100/1000Base-T Ethernet RJ-45 connectors are available BPX6620 backplane also have an ample number of power pins
for use on the backplane. Data communication performance of available to meet these demands. The system designer needs to
the backplane’s Ethernet interfaces depends on the Ethernet be aware of the potential power demands of the entire system
controller hardware and configuration on the system host board. including the particular SHB to ensure that both the power supply
Consult your SHB Ethernet interface implementation method for and the power connectors in the cable harness can safely deliver
details. The SHB OPTIONAL BACKPLANE I/O SUPPORT the necessary power to drive the entire system.
TABLE explains the backplane I/O capabilities supported by Specific implementations of ACPI signals, ATX/EPS power supply
Trenton’s PICMG 1.3 System Host Boards. type and the operating system software will determine the
specific connection method for the power supply. For example
POWER CONNECTORS the use of the Power Good (PWRGD), Power Supply On
The BPX6620 backplane is available with power connectors (PSON#), Five Volt Standby (5VSB) and the Power Button
suitable for use with either an ATX or EPS power supply. (PWRBT#) ACPI or soft power control signals require the
EXTENDED-CURRENT TERMINAL BLOCKS following connection method:
Two extended-current terminal blocks provide additional power Power Supply
capacity for power-intensive applications -- up to 80 Amps of PWRGD
+12V, 80 Amps of +3.3V and 40 Amps of +5V. Trenton
PSON# PICMG 1.3
Backplane
POWER INDICATORS 5VSB SHB Slot
Surface-mount LEDs provide a convenient visual check for +5V,
-5V, +5V AUX,+12V, -12V and +3.3V power connection and
status. CAUTION: Never install or remove the SHB or any option Rtypical = 8.2k W
card from the BPX6620 backplane if the +5V AUX LED is
GREEN. If the system appears to be off and the+5V AUX LED is PWRBT#
GREEN then you need to remove or turn-off the incoming power Power On
to the system power supply. Switch
Normally Open
Momentary
AUXILIARY POWER CONNECTOR
The +12V power connector on the BPX6620 routes auxiliary
power to the SHB’s edge connectors. This new capability of ACPI signal usage is optional and may be turned off using the
PICMG 1.3 compliant SHBs and backplanes eliminates the need SHBs BIOS and/or signal jumpers. Specific power connections
for auxiliary power connections on the system host board. and BIOS parameters will differ according to unique system
design requirements. For more information refer to the Appendix
PRINTED CIRCUIT LAYERS B (Power Connection) and Advanced Setup BIOS sections of any
The backplane is a six-layer, .080” thick board with three separate Trenton Technical Reference Manual for server-class system host
signal layers: +5V/+12V, +3.3V and ground. Multi-layer backplane boards such as the Trenton NLT, NLI, SLT or SLI.
construction provides excellent noise immunity.
Trenton Technology Inc. 2350 Centennial Drive, Gainesville, Georgia 30504 Sales: (800) 875-6031 Phone: (770) 287-3100 Fax: (770) 287-3150
E-mail: Sales@TrentonTechnology.com Web: www.TrentonTechnology.com