Beruflich Dokumente
Kultur Dokumente
Pieces description
2 A 1 2 / I K 0 1 SHAPING PIECE
Execution: Weldolet ANSI STD, ramification processed at normal wall thickness according DIN 2448 Duct of basis Ramification DN dn 80 15 200 80
X6CrNiTi18-10 (1.4541) / DIN 17440 Standard of manufacturer MSS/SP-97, DIN 17440, AD-W13 Manufacturer must posseses authorization according AD W0.
ASME B 16.25 or DIN 2559; joint with shape 22 without Testing certificate of reception 3.2 according EN10204
Exceptions: - if the manufacturer uses a QM system according to annex I, chapter 4.3 of Directive 97/23/EG , then is sufficient a certificate APZ 3.1 - for diameters DN < 25 is sufficient a certificate of plant 2.2
Marking:
OMV Norm H4209; MSS/SP-97; longitudinal line RAL-Nr. 5010 (blue); - product number is marked; without packing
Packing:
PETROM S.A. reserve all rights on this document and will act in instance on that person which use or send it without authorization.
Pieces description
2 A 1 2 / I K 0 1 SHAPING PIECE
Dimensions:
Cat. Nr. DN
Main duct
dn outlet
A (mm)
B (mm)
C (mm)
Weight
kg
80 15 20 25 40 50 80
44 19 22 27 33 38 44
Remarks: A Length of mounting according standard of manufacturer MSS/SP-97 B, C, Weight: approximate sizes (standard of manufacturer) Ramification with Weldolet may be executed with maximum half from nominal diameter of main duct.
PETROM S.A. reserve all rights on this document and will act in instance on that person which use or send it without authorization.