Beruflich Dokumente
Kultur Dokumente
1. Drape wing protectors over the wings and raise the car.
3.
Insert two 83 95 238 Wedges, between the oil sump and subframe and between the
gearbox and subframe.
5.
7. Remove the right-hand engine attachment with bracket and engine mount.
8.
Undo the retaining bolts from the coolant pump pulley and power steering pump
pulley
10. Remove the coolant pump pulley and power steering pump pulley.
14.
Lower the car and zero the engine. The markings on the camshaft sprockets and
timing cover should be aligned. Use Adjustment tools, cam sprockets and timing
beltKM-800-20. The crankshaft markings should also be aligned. Fit locking tools
KM-800-1 and KM-800-2 for the camshaft sprockets and locking tool KM-800-10 for
the crankshaft.
15. Undo the tensioning pulley and adjusting rollers. Use tool 83 94 983 as a
counterstay on the adjusting rollers.
16. Mark the direction of rotation on the belt. The belt can also be marked with the
respective camshaft markings and crankshaft marking to facilitate refitting. Remove
tool KM-800-10 from the crankshaft. Let locking tools KM-800-1 and KM-800-2
remain. Remove the lower adjusting roller. Ensure the washer behind the roller is
also removed. Remove the timing belt.