Beruflich Dokumente
Kultur Dokumente
1. Draw the bending moment and shear force diagram of a propped cantilever beam
of span 6 m due to a point load of 6 kN at the mid span. [8+8]
2. Determine the moments and reactions at the supports of the fixed-fixed beam which
is loaded by a concentrated load of 10kN at a point 3 m from the left support. The
span of the beam is 8 m. Use method of consistent deformations. EI is constant.
[10+6]
3. A pin jointed roof truss is loaded as shown in Figure1. Determine the forces in
members AE, AC, CE, CF, CD and EF using the method of tension coefficients.
[4+6+6]
Figure 1:
6. The system of concentrated loads shown below rolls from left to right on a girder
of span 16m, 30kN load leading. For a section 4m from left support , determine
the maximum B.M and S.F
1 of 2
Code No: NR310102 NR
Figure 2:
7. Draw the influence line diagram for B.M at a point 8m from the left abutment on a
bridge girder of span 30m and find the maximum B.M at that point due to a series
of wheel loads 80kN, 160kN, 160kN and 160kN at centre to centre distances of 4m,
2.5m, 2.5m and 2.5m respectively. The loads can cross in either directions with the
80kN load leading. [8+8]
?????
2 of 2