Beruflich Dokumente
Kultur Dokumente
Tg 150 min 110 min 110 min 150 min 170 min 170 min
Td 325 310 min 310 min 325 min 340 min 340 min
Z-Axis CTE
Alpha 1 60 max 60 max 60 max 60 max 60 max 60 max
Alpha 2 300 max 300 max 300 max 300 max 300 max 300 max
50-260 C 3.5 4.0 4.0 3.5 3.0 3.0
T260 (min) 30 min 30 min 30 min 30 min 30 min 30 min
T288 (min) 10 min 5 min 5 min 10 min 15 15
T300 (min) ABBUS ABBUS ABBUS ABBUS 2 2
If previous material was standard FR-4: "Material should meet or exceed requirements of IPC 4101/121". I use 121 instead of 101
because it is open to the use or exclusion of fillers, which are just characteristics of different resin systems. Basically, you want
the population of allowable materials to be as large as possible to keep costs down.
If previous material was 170Tg FR4: "Material should meet or exceed requirements of IPC 4101/129 (or /124 if you can go down
to 150Tg)".