Beruflich Dokumente
Kultur Dokumente
n e t w o r k / c o m m u n i c at i o n
INTRO D UCTION n e t w o r k / c o m m u n i c at i o n
As the A/V and IT industries continue to converge, AMX continues to bridge the gap between these cutting-edge
technologies. Whether your customer wants to deliver voice or video communications down the hall or around the
world, AMX has an arsenal of products designed to make it happen. From WiFi and ZigBee to the Apple® iPhone, AMX is
leveraging our A/V system experience to take advantage of other new communication and network technologies/products
effectively extending our reach and our customers ability to reach around the world – now that’s flexible communication.
SYSTEM DIAGRAM
This drawing shows a Communications Gateway connecting an is acting as a PBX allowing phones and touch panels within a
AMX system to the public telephone network to enable telephone building to call one another as well as to make outside calls.
calls to/from a touch panel an. The Communications Gateway
Public Telephone
Network
IP Phone
IP Phone
AMX NXA-ENET24
Managed Ethernet Switch
AMX NXD-1000Vi
AMX NXA-WAP250G
Touch Panel w/ intercom
802.11b/g Wireless Access Point
AMX MET-ECOM
Metreau Entry Communicator
AMX NXD-700Vi
Touch Panel w/ Intercom
AMX MVP-8400i
Touch Panel w/ Intercom
Ethernet
Digital/Analog Phone
IP Phone
IP Phone
IP Phone
Cell Phone
AMX NXA-ENET24
Managed Ethernet Switch
AMX NXD-1000Vi
Touch Panel w/ Intercom
Ethernet
AMX MVP-8400i
Analog
Touch Panel w/ Intercom AMX NXD-700Vi
Wireless - WiFi Touch Panel w/ Intercom
AMX NXD-500i
Touch Panel w/ Intercom
3000 R E S EARCH D RIVE, RICH ARDSON, TX 75082 • 800.222.0193 • 469.624.7 1 5 3 f a x • TEC H NI C A L S U PPORT 8 0 0 . 9 3 2 . 6 9 9 3 247
© May 2009 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.
n e t w o r k / c o m m u n i c at i o n
MET-ECOM
Metreau Entry Communicator
MET-ECOM-BK Black (FG2180-01-BK)
MET-ECOM-WH White (FG2180-01-WH)
MET-ECOM-PB Polished Brass (FG2180-01-PB)
MET-ECOM-AB Antique Brass (FG2180-01-AB)
MET-ECOM-SS Stainless Steel (FG2180-01-SS)
MET-ECOM-BP Brushed Pewter (FG2180-01-BP)
EXPerience Kit(s) Available, see page 614
OVERVIEW
T RAI NI NG AVAI LABLE
The Metreau Entry Communicator enables doorbell notification Fo r i m po rt a nt i nst a l l a t i o n, c o nf i gura t i o n a nd pro g r a m m in g t e ch n iq u e s ,
to residents of hotels, homes, or condos from visitors at doors A M X U ni v e rsi t y t ra i ni ng i s a v a i l a bl e . J ust v i si t ww w.a mx.c o m/ p r o d u c t s/
M ET-EC OM . as p a nd cl i c k o n t he “Tra i ni ng” t a b.
and gates. With the addition of an AMX Modero intercom touch
panel, residents can see visitors via an integrated one-way color
camera, have two-way audio conversations, and open doors or
gates. Adding the AMX SIP Communication Gateway will also
A CLOSER LOOK
enable residents to communicate with visitors from any telephone
throughout the business or residence.
COMMON APPLICATION
Ideal for placement in residential outdoor entryways or next to
doors to notify residents that visitors have arrived.
FEATURES Vi d eo C am er a
ONLINE www.amx.com/products/MET-ECOM.asp
Eth er n et C o n n ecti o n
2 M u l ti -P u r p o s e I /Os (5 V )
SPECIFICATIONS
DIMENSIONS (HWD) mounting
5 3/8” x 3 5/8” x 1 9/16” (13.62 cm x 9.13 cm x 3.96 cm) • The MET-ECOM is installed in one of two ways:
weight • 4 screws for hard surface mounting
14.4 oz (408 g) • 2 expansion clips for pressure mounting
power requirement colors available
• QVGA 320 x 240 Installation Kit- includes front mount flange, 4 installation screws
• Supports Motion JPEG (MJPEG) and H.263 codecs (#4-40 x 3.12), 2 Phoenix connectors (female, 3.5mm) and a Ferrite clip
• Viewing Angle: 42º
speaker
• 8 Ohm, 2W
• 80dB SPL (sound pressure level at 1 meter)
• Meets G.711 sound standard
microphone
• -40 dB sensitivity, built-in echo cancellation (telephone quality)
• Full duplex communication
• VoIP Telephony
rear panel components
• Camera Viewing Angle Adjustment
• Ethernet Port – 10/100 Ethernet with PoE. LEDs show communication activity,
connection status, speeds, and mode information:
- S PD (speed) – Green LED lights On when the connection speed is 100 Mbps
and turns Off when the speed is 10 Mbps
- L /A (link/activity) – Orange LED lights On when the Ethernet cables are
connected and terminated correctly and blinks when receiving Ethernet
data packets
• 2 Multi-Purpose I/Os (5V): 2-channel binary I/O ports for contact closure with
each input being capable of voltage sensing. Input format is software select
able with interactive power sensing for IR ports
• 2 Low Voltage Relays (1A contact): 2-channel singlepole single throw relay
ports with each relay being independently controlled and supporting up to 2
independent external relay devices
3000 R E S EARCH D RIVE, RICH ARDSON, TX 75082 • 800.222.0193 • 469.624.7 1 5 3 f a x • TEC H NI C A L S U PPORT 8 0 0 . 9 3 2 . 6 9 9 3 249
© May 2009 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.
n e t w o r k / c o m m u n i c at i o n
MET-ECOM-D
Metreau Entry Communicator w/Display
MET-ECOM-D-BK Black (FG2180-05-BK)
MET-ECOM-D-WH White (FG2180-05-WH)
MET-ECOM-D-PB Polished Brass (FG2180-05-PB)
MET-ECOM-D-AB Antique Brass (FG2180-05-AB)
MET-ECOM-D-SS Stainless Steel (FG2180-05-SS)
MET-ECOM-D-BP Brushed Pewter (FG2180-05-BP)
EXPerience Kit(s) Available, see page 614
OVERVIEW
T RAI NI NG AVAI LABLE
The Metreau Entry Communicator with display enables doorbell Fo r i m po rt a nt i nst a l l a t i o n, c o nf i gura t i o n a nd pro g r a m m in g t e ch n iq u e s ,
notification to residents of hotels, homes, or condos from visitors A M X U ni v e rsi t y t ra i ni ng i s a v a i l a bl e . J ust v i si t ww w.a mx.c o m/ p r o d u c t s/
M ET-EC OM -D. as p a nd cl i c k o n t he “Tra i ni ng” t a b.
at doors and gates. With the addition of an AMX Modero
Intercom-Enabled Touch Panel, residents can see visitors via
an integrated one-way color camera, have two-way audio
conversations, and open doors or gates. By taking advantage of
A CLOSER LOOK
the integrated 1.6“ display (not weather-resistant), users have the
option of placing custom logos, personalized greeting messages,
privacy notifications and other announcements (e.g. “Welcome,”
“Do Not Disturb,” “Make up Room”) on the display. Adding the
AMX SIP Communication Gateway will also enable residents to
communicate with visitors from any telephone throughout the OLED Di s p l ay
business or residence.
Vi d eo C am er a
COMMON APPLICATION
S p eak er
Ideal for residences to allow display of street address or family
name or hotel rooms to display room or number or message for
housekeeping or visitors. Du al C o l o r LED S tatu s Ba r ( Ye llo w / R e d )
P u s h b u tto n (Do o r b el l )
FEATURES
• 2-way VoIP audio to an intercom-enabled Modero Touch Panel M i cr o p h o n e
• OLED display for personalized messaging
• 1-way video conferencing with any Touch Panel
• Includes I/Os and Relays C am er a Vi ew i n g An g l e Ad j u s tm en t
• Dual-color LED button provides feedback and
doorbell notification
• Small form factor and shallow depth make for easy installation
• VoIP integration allows an unlimited number of entry
communicators to be accommodated per system
• Camera angle can be easily positioned during installation to
Eth er n et C o n n ecti o n
allow viewing of guests at door or gate
2 M u l ti -P u r p o s e I /Os (5 V )
• Power over Ethernet
2 Lo w Vo l tag e Rel ay s (1 A C o n tact)
ONLINE www.amx.com/products/MET-ECOM-D.asp
SPECIFICATIONS
DIMENSIONS (HWD) mounting
5 3/8” x 3 5/8” x 1 9/16” (13.62 cm x 9.13 cm x 3.96 cm) The MET-ECOM-D is installed in one of two ways:
• 4 screws for hard surface mounting
weight
• 2 expansion clips for pressure mounting
14.4 oz (408 g)
colors available
power requirement
• Black MET-ECOM-BK (FG2408-01-BK)
• PoE powered – no local Power Supply needed
• White MET-ECOM-WH (FG2408-01-WH)
• IEEE 802.3af Compliant
• Polished Brass MET-ECOM-PB (FG2408-01-PB)
front panel components
• Antique Brass MET-ECOM-AB (FG2408-01-AB)
• OLED Display • Stainless Steel MET-ECOM-SS (FG2408-01-SS)
• Integrated Color Video Camera • Brushed Pewter MET-ECOM-BP (FG2408-01-BP)
• Speaker
certifications
• Dual Color LED Status Bar: (Yellow/ Red) can be used to provide feedback,
FCC Class B, CE, IEC60950, RoHS
to attract attention for action, or as general indicator
• Pushbutton (Doorbell) ENVIRONMENTAL
• 1.6” Diagonal Display Installation Kit- includes front mount flange, 4 installation screws
• 180° Viewing Angle (#4-40 x 3.12), 2 Phoenix connectors (female, 3.5mm) and a Ferrite clip
• 2000: 1 Contrast Ratio
• Unit stores up to 50 .bmp images
INTEGRATED COLOR VIDEO CAMERA
• QVGA 320 x 240
• Supports Motion JPEG (MJPEG) and H.263 codecs.
• Viewing Angle: 42º
speaker
• 8 Ohm, 2W
• 80dB SPL (sound pressure level at 1 meter)
• Meets G.711 sound standard
microphone
• -40 dB sensitivity, built-in echo cancellation (telephone quality)
• Full duplex communication
• VoIP Telephony
rear panel components
• Camera Viewing Angle Adjustment
• Ethernet Port – 10/100 Ethernet with PoE. LED show communication activity,
connection status, speeds, and mode information:
- SPD (speed) – Green LED lights On when the connection speed is 100 Mbps
and turns Off when the speed is 10 Mbps
- L/A (link/activity) – Orange LED lights On when the Ethernet cables are
connected and terminated correctly, and blinks when receiving Ethernet
data packets.
• 2 Multi-Purpose I/Os (5V): 2-channel binary I/O ports for contact closure with
each input being capable of voltage sensing. Input format is software
selectable with interactive power sensing for IR ports.
• 2 Low Voltage Relays (1A contact): 2-channel single-pole single throw relay
ports with each relay being independently controlled and supporting up to 2
independent external relay devices.
3000 R E S EARCH D RIVE, RICH ARDSON, TX 75082 • 800.222.0193 • 469.624.7 1 5 3 f a x • TEC H NI C A L S U PPORT 8 0 0 . 9 3 2 . 6 9 9 3 251
© May 2009 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.
n e t w o r k / c o m m u n i c at i o n
CSG-500
SIP Communications Gateway
CSG-500 SIP Gateway for 50 Users (FG2182-01)
OVERVIEW SPECIFICATIONS
The CSG-500 SIP Communications Gateway is a stand alone PBX DIMENSIONS (HWD)
(Private Branch Exchange) that allows intercom-enabled Modero • 1 3/4” x 11 1/2” x 51/2” (4.41 cm x 29.09 cm x 13.82 cm)
• RU: 1
Touch Panels to be transformed into full-featured IP phones. The
WEIGHT
CSG can be configured to support a maximum of 50 users (or
2.25 lbs (1.02 kg)
extensions) and will support up to 25 concurrent calls. With the
ENCLOSURE
CSG and an intercom-enabled Modero Touch Panel, you have Metal with black matte finish
access to phone features like call waiting, caller ID, call queuing, POWER REQUIREMENTS
and voice mail. The CSG supports AMX Session Initiated Protocol Constant current draw: 2.6 A @ 12 VDC
(SIP)-enabled touch panels, which include the MVP-8400i, NXD- MEMORY
1000Vi, and NXD-700Vi, as well as third-party SIP phones. The • 8MB on board serial Flash memory
• 64MB 16-bit parallel SDRAM
CSG-500 runs a version of Asterisk which is an industry standard
CERTIFICATIONS
for VoIP PBX systems.
FCC (Class A), CE, IEC60950, and RoHS
ENVIRONMENTAL
COMMON APPLICATION
• Operating Temperature: 0° C (32° F) – 40° C (104° F)
Ideal for installation in residences and commercial applications • Operating Humidity: 5% – 85% RH Non-Condensing
where there is a need for SIP-enabled touch panels to make • Storage Temperature: -20° C (-4° F) – 70° C (158° F)
or receive phone calls from other touch panels or telephones • Storage Humidity: 0% – 85% RH Non-Condensing
• Heat Dissipation (Typical): 106.6 BTU/hr
anywhere in the world.
FRONT PANEL COMPONENTS
• Power LED: Indicates whether the unit is turned on and receiving power.
FEATURES
• Network LED: Indicates whether a network cable is connected and the speed
• Local, long distance, and international calling via VoIP service of the network.
providers • IP Phones LEDs: Indicates whether the corresponding link is connected and the
• Caller ID, call waiting, call groups, call queuing, IVR support and speed of the link.
voice mail • Analog LEDs: Indicates whether the analog port is installed and the type of
port (FXO/FXS) installed. (Not available on all models.)
• Uses Session Initiation Protocol, the standard for VoIP technology
REAR PANEL COMPONENTS
• Supports both AMX SIP-enabled touch panels and third-party
• Power Connector: 5.1mm OD, 2.1mm pin, 12V 3.0A center positive
SIP phones • Configuration Reset Switch: Resets the current configuration to the factory
• Supports up to 50 users and 25 concurrent calls default when pressed.
• Console port: 1 RJ45 10/100baseT port for console (craft) port serial control
ONLINE www.amx.com/products/CSG-500.asp • Network port: 1 RJ45 10/100baseT port for a general (WAN) connection
• IP phones ports: 4 RJ45 10/100baseT ports for IP phone connections
INCLUDED ACCESSORIES
T R A INING AVAILAB LE
• PS5.0, Power Supply, 5.0A, 12.0VDC (FG423-31)
For im por tant ins talla t i o n , co n fi gura ti o n a n d p ro g ra mmi n g te ch ni que s,
AMX Univer s ity tr aining i s a va i l a b l e . Ju st vi si t ww w.a mx.c om/pr oduc ts /
• CSG SIP Communications Gateway Installation Guide (93-2182-01)
CSG - 5 0 0 . as p and clic k o n th e “Tra i ni ng” ta b . • 2 Surface mounting brackets (62-2182-04)
• 4 #4-40 X .250 PPH screws (80-0112)
A C LO SE R LOOK
Analog I P P h o n es Netw o r k Po w er
N etw or k
Po wer 12VD C Por t
Configur ation IP Ph o n e Un u s ed Po r ts
Por t Inpu t (4 )
3000 R E S EARCH D RIVE, RICH ARDSON, TX 75082 • 800.222.0193 • 469.624.7 1 5 3 f a x • TEC H NI C A L S U PPORT 8 0 0 . 9 3 2 . 6 9 9 3 253
© May 2009 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.
n e t w o r k / c o m m u n i c at i o n
CSG-544
SIP Communications Gateway
CSG-544 SIP Gateway for 50 Users, (FG2182-02)
4 analog phone input ports,
4 PSTN output ports
OVERVIEW SPECIFICATIONS
The CSG-544 is a stand alone PBX (Private Branch Exchange) DIMENSIONS (HWD)
that enables any intercom-enabled Modero Touch Panels to • 1 3/4” x 11 1/2” x 51/2” (4.41 cm x 29.09 cm x 13.82 cm)
• RU: 1
be transformed into full-featured IP phones. It also includes the
WEIGHT
capability to support 4 analog (POTS) telephones and up to 4
2.25 lbs (1.02 kg)
external phone lines from a PSTN (your local telephone company)
ENCLOSURE
or analog PBX. The CSG supports AMX Session Initiated Protocol Metal with black matte finish
(SIP)-enabled touch panels, which include the MVP-8400i, NXD- POWER REQUIREMENTS
1000Vi, and NXD-700Vi, as well as third-party SIP phones. The Constant current draw: 2.6 A @ 12 VDC
CSG-544 runs Asterisk, an industry standard for VoIP PBX systems MEMORY
and can function not only as a PBX, but also as VoIP ATA, or VoIP • 8MB on board serial Flash memory
• 64MB 16-bit parallel SDRAM
gateway. It has 8 analog ports that provide the user with 4 Foreign
CERTIFICATIONS
Exchange Office (FXO) ports and 4 Foreign Exchange Station
FCC (Class A), CE, IEC60950, and RoHS
(FXS) ports. The FXO ports connect to a PSTN and the FXS ports
ENVIRONMENTAL
are used to add older technology analog phones to the system. • Operating Temperature: 0° C (32° F) – 40° C (104° F)
• Operating Humidity: 5% – 85% RH Non-Condensing
COMMON APPLICATION • Storage Temperature: -20° C (-4° F) – 70° C (158° F)
Ideal for installation where there is a need for SIP-enabled touch • Storage Humidity: 0% – 85% RH Non-Condensing
• Heat Dissipation (Typical): 106.6 BTU/hr
panels to make or receive phone calls from other touch panels or
FRONT PANEL COMPONENTS
telephones as well as support for 4 analog phones and up to 4
• Power LED: Indicates whether the unit is turned on and receiving power.
lines of local and long distance calling capability via a PSTN. • Network LED: Indicates whether a network cable is connected and the speed
of the network.
FEATURES • IP Phones LEDs: Indicates whether the corresponding link is connected and the
• Local, long distance, and international calling via VoIP service speed of the link.
providers or local PSTN (where certified) • Analog LEDs: Indicates whether the analog port is installed and the type ofport
(FXO/FXS) installed. (Not available on all models.)
• Caller ID, call waiting, call groups, call queuing, IVR support and
REAR PANEL COMPONENTS
voice mail
• Power Connector: 5.1mm OD, 2.1mm pin, 12V 3.0A center positive
• Uses Session Initiation Protocol, the standard for VoIP technology • Configuration Reset Switch: Resets the current configuration to the factory
• Supports AMX SIP-enabled touch panels, third-party SIP default when pressed.
phones, and up to 4 analog (POTS) telephones • Console port: 1 RJ45 10/100baseT port for console (craft) port serial control
• Network port: 1 RJ45 10/100baseT port for a general (WAN) connection
• Supports up to 50 users and 25 concurrent calls
• IP phones ports: 4 RJ45 10/100baseT ports for IP phone connections
• Analog ports: 4 for FXO and 4 for FXS connections
ONLINE www.amx.com/products/CSG-544.asp
INCLUDED ACCESSORIES
• PS5.0, Power Supply, 5.0A, 12.0VDC (FG423-31)
T R A INING AVAILAB LE • CSG SIP Communications Gateway Installation Guide (93-2182-01)
For im por tant ins talla t i o n , co n fi gura ti o n a n d p ro g ra mmi n g te ch ni que s, • 2 Surface mounting brackets (62-2182-04)
AMX Univer s ity tr aining i s a va i l a b l e . Ju st vi si t ww w.a mx.c om/pr oduc ts / • 4 #4-40 X .250 PPH screws (80-0112)
CSG - 5 4 4 . as p and clic k o n th e “Tra i ni ng” ta b .
A C LO SE R LOOK
Analog I P P h o n es Netw o r k Po w er
N etw or k
Po wer 12VD C Por t
Configur ation IP Ph o n e An al o g P h o n es An al o g P h o n es
Por t Inpu t (4 ) Li n es I n (4 ) Li n es Ou t (4 )
Analog Phone
Public Telephone
Network
AMX NXA-ENET24
Managed Ethernet Switch
Ethernet
AMX NXD-700Vi
Analog
Touch Panel
Wireless - Cell Phone
IP Phone
3000 R E S EARCH D RIVE, RICH ARDSON, TX 75082 • 800.222.0193 • 469.624.7 1 5 3 f a x • TEC H NI C A L S U PPORT 8 0 0 . 9 3 2 . 6 9 9 3 255
© May 2009 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.
n e t w o r k / c o m m u n i c at i o n
CSG-580
SIP Communications Gateway
CSG-580 SIP Gateway for 50 Users, (FG2182-03)
8 PSTN lines
OVERVIEW SPECIFICATIONS
The CSG-580 is a stand alone PBX (Private Branch Exchange) DIMENSIONS (HWD)
that enables any intercom-enabled Modero Touch Panels to • 1 3/4” x 11 1/2” x 51/2” (4.41 cm x 29.09 cm x 13.82 cm)
• RU: 1
be transformed into full-featured IP phones. It also includes the
WEIGHT
capability to support up to 8 external phone lines from a PSTN
2.25 lbs (1.02 kg)
(your local telephone company) or analog PBX. With the CSG and
ENCLOSURE
an intercom-enabled Modero Touch Panel, you have access to a Metal with black matte finish
variety of robust calling features. The CSG supports AMX Session POWER REQUIREMENTS
Initiated Protocol (SIP)-enabled touch panels, which include the Constant current draw: 2.6 A @ 12 VDC
MVP-8400i, NXD-1000Vi, and NXD-700Vi, as well as third-party IP MEMORY
phones. The CSG-580 runs Asterisk, an industry standard for VoIP • 8MB on board serial Flash memory
• 64MB 16-bit parallel SDRAM
PBX systems. It has eight analog ports that provide the user with 8
CERTIFICATIONS
Foreign Exchange Office (FXO) ports to connect to a PSTN.
FCC (Class A), CE, IEC60950, and RoHS
ENVIRONMENTAL
COMMON APPLICATION
• Operating Temperature: 0° C (32° F) – 40° C (104° F)
Ideal for installation in residences and commercial applications • Operating Humidity: 5% – 85% RH Non-Condensing
where there is a need for SIP enabled touch panels to make • Storage Temperature: -20° C (-4° F) – 70° C (158° F)
or receive phone calls from other touch panels or telephones • Storage Humidity: 0% – 85% RH Non-Condensing
• Heat Dissipation (Typical): 106.6 BTU/hr
anywhere in the world as well as support for up to 8 lines of
FRONT PANEL COMPONENTS
external local, long distance and international telephone calling
• Power LED: Indicates whether the unit is turned on and receiving power.
capability via a PSTN. • Network LED: Indicates whether a network cable is connected and the speed
of the network.
FEATURES • IP Phones LEDs: Indicates whether the corresponding link is connected and
• Local, long distance, and international calling via VoIP service the speed of the link.
providers or local PSTN (where certified) • Analog LEDs: Indicates whether the analog port is installed and the type of
port (FXO/FXS) installed. (Not available on all models.)
• Caller ID, call waiting, call groups, call queuing, IVR support, and
REAR PANEL COMPONENTS
voice mail
• Power Connector: 5.1mm OD, 2.1mm pin, 12V 3.0A center positive
• Uses Session Initiation Protocol, the standard for VoIP technology • Configuration Reset Switch: Resets the current configuration to the factory
• Supports both AMX SIP-enabled touch panels and third-party default when pressed.
SIP phones • Console port: 1 RJ45 10/100baseT port for console (craft) port serial control
• Network port: 1 RJ45 10/100baseT port for a general (WAN) connection
• Supports up to 50 users and 25 concurrent calls
• IP phones ports: 4 RJ45 10/100baseT ports for IP phone connections
• Analog Ports: 8 RJ11 ports for FXO connections
ONLINE www.amx.com/products/CSG-580.asp
INCLUDED ACCESSORIES
• PS5.0, Power Supply, 5.0A, 12.0VDC (FG423-31)
T RA INING AVAILAB LE • CSG SIP Communications Gateway Installation Guide (93-2182-01)
For im por tant ins talla ti o n , co n fi gura ti o n a n d p ro g ra mmi n g te ch ni que s, • 2 Surface mounting brackets (62-2182-04)
AMX Univ er s ity tr aining i s a va i l a b l e . Ju st vi si t ww w.a mx.c om/pr oduc ts / • 4 #4-40 X .250 PPH screws (80-0112)
CSG - 5 8 0 . as p and clic k o n th e “Tra i ni ng” ta b .
A C LO SE R LOOK
Analog I P P h o n es Netw o r k Po w er
N etw or k
Po wer 12VD C Por t
Configur ation IP Ph o n e An al o g P h o n es
Por t Inpu t (4 ) Li n es Ou t (8 )
3000 R E S EARCH D RIVE, RICH ARDSON, TX 75082 • 800.222.0193 • 469.624.7 1 5 3 f a x • TEC H NI C A L S U PPORT 8 0 0 . 9 3 2 . 6 9 9 3 257
© May 2009 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.
n e t w o r k / c o m m u n i c at i o n
Modero wireless touch panels. In addition the NXA-WAP250G • 802.11b: -90 dBm @ 1 Mbps, -84 dBm @ 11 Mbps
• 802.11g: -86 dBm @ 6 Mbps, -68 dBm @ 54 Mbps
provides convenient WLAN access for office/home computers
AC POWER ADAPTER
with connection speeds of up to 54Mbps. It is Wi-Fi certified
• Input: 100-240 VAC, 50-60 Hz
including enterprise-grade wireless encryption standards such • Output: 5 VDC, 2 A
as WPA2, WPA, 802.1x, and 64-bit/128-bit WEP. UNIT POWER SUPPLY
• DC Input: 5 VDC, 2 A maximum
FEATURES • Power Consumption: 6.5 W maximum
• Wireless encryption standards such as enterprise-grade LED INDICATORS
A C LO SE R LOOK
WL AN L ED
L AN L ED
POWER LED
3000 R E S EARCH D RIVE, RICH ARDSON, TX 75082 • 800.222.0193 • 469.624.7 1 5 3 f a x • TEC H NI C A L S U PPORT 8 0 0 . 9 3 2 . 6 9 9 3 259
© May 2009 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.
n e t w o r k / c o m m u n i c at i o n
NXA-WAP2403A NXA-WAP2405A
Ceiling Mount Rack/Ceiling Mount
Omnidirectional Antenna Omnidirectional Antenna
(FG2255-20) (FG2255-21)
OVERVIEW OVERVIEW
The NXA-WAP2403A is a ceiling mount antenna designed for The NXA-WAP2405A antenna provides residential and
above-ceiling applications that require frequency coverage from commercial environments the ability to experience additional
2.4 GHz to 2.5 GHz. Designed primarily for corporate settings, wireless coverage area with the flexibility of placing the antenna in
the NXA-WAP2303A gets the 2.4 GHz signal out of the closet the ceiling or on top of the equipment rack. In corporate meeting
and into the conference room, training area and any other rooms, the ceiling tiles allow for quick and easy installation. In the
meeting environment that requires wire-free control capabilities. home, where homeowners want the antenna out of sight, it can
The ultra flat antenna mounts seamlessly above any ceiling tile, be positioned on the top shelf of the rack. The NXA-WAP2405A
so it delivers a wireless signal clear and strong within the desired is designed to cover frequencies from 2400 to 2485 MHz with
area. This setup also keeps the WAP on the rack, where it can be a VSWR of less than 1.5:1. Its broad elevation plane radiation
easily monitored – there’s no need to climb into the ceiling. pattern has been shaped to direct energy where it is needed,
The WAP is always within arm’s reach on the rack. while suppressing the misdirected upper and lower sidelobe
energy. The result is excellent coverage for a variety of
FEATURES in-building applications.
• 3 dBi antenna provides true omni-directional performance
• Three foot (0.915 m) UL910 Plenum cable can be installed in the FEATURES
strictest indoor mounting locations (including air ducts) • 5.5 dBi Omnidirectional Antenna
• Dual 10-32 stud mount • An included 1/4-20 insert allows for easy installation onto
• Utilizes UL94-V0 materials which provide the UL’s highest flame ceiling tile rails
retardant rating; These materials provide maximum placement • Optimized radiation pattern focuses energy where it is needed,
flexibility while meeting the most stringent building codes while at the same time, suppressing both upper and lower side
NOTE: The NXA-WAP2403A is not compatible with the NXA-WAP250G lobe energy
• UL Plenum rated RG58 coax cable and UL94-V0 radome meet
ONLINE www.amx.com/products/NXA-WAP2403A.asp the strictest safety specifications
NOTE: The NXA-WAP2405A is not compatible with the NXA-WAP250G
SPECIFICATIONS
ONLINE www.amx.com/products/NXA-WAP2405A.asp
DIMENSIONS (HWD)
5” x 10” x 1/16” (12.7 cm x 25.4 cm x .30 cm)
WEIGHT SPECIFICATIONS
8 oz (230 g)
DIMENSIONS (HWD)
FREQUENCY 9 13/16” x 1” (24.9 cm x 2.54 cm)
2400-2500 MHz
WEIGHT
INCLUDED ACCESSORIES 8 oz (230 g)
• 3 dBi Omni-directional antenna
FREQUENCY
• Three foot (0.915 m) UL910 Plenum cable
2400-2485 MHz
NXA-WAP2410A NXA-WAP2413A
Outdoor Enclosed Yagi Antenna Indoor/Outdoor Directional Panel
(FG2255-23) Antenna
(FG2255-22)
OVERVIEW OVERVIEW
The NXA-WAP2410A can be used to bridge antennas between The NXA-WAP2413A antenna is designed to extend the wireless
two networks or for point-to-point communications. It is field signal and data transmissions of 2.4 GHz transmission devices.
adjustable for vertical or horizontal polarization with matched This boost in the WAP’s signal helps to meet the wireless
principal plane beamwidths for optimum performance in either requirements in different applications and environmental settings.
orientations. This design also provides improved front-to-back ratio It also provides wireless users extensive roaming access. The
and sidelobe suppression that reduces interference. All models NXA-WAP2413A is designed to cover 2.4 GHz frequencies,
feature a robust mounting structure for consistent performance obtaining maximum gain with an attractive, low profile package
regardless of weather conditions. The NXA-WAP2410A antenna and provides efficient and stable performance across the band.
beams a wireless signal from a main residence to smaller structures Can be mounted indoors or outdoors.
located on the property, where wireless control is desired. The
same concept applies for the corporate environment, where FEATURES
remote locations on a campus may need wireless networking. • 13 dBi directional antenna
• Attractive, low profile housing; Permits the unit to be mounted
FEATURES in either vertical or horizontal polarity
• 10 dBi directional antenna • Blends well with indoor and outdoor environments where
• A 30 dB front-to-back ratio permits less physical separation on aesthetic considerations are important
the tower, thus adding mounting flexibility at installation sites • Corner exit RG58 pigtail design permits a wide variety of
where space is limited connector options
• Attractive weather-proof radome is constructed of UV resistant • Utilizes UL94-V0 materials and PC board that provide the UL’s
material; This construction provides robust and trouble-free use highest flame retardant rating for maximum placement
in harsh outdoor environments flexibility; Meets most stringent building codes
• Field adjustability allows for both vertical or horizontal polarity; NOTE: The NXA-WAP2413A is not compatible with the NXA-WAP250G
Eliminates co-channel interference from neighboring radiators
• Includes a robust mast mount bracket which is designed to ONLINE www.amx.com/products/NXA-WAP2413A.asp
withstand up to 125 mph winds
NOTE: The NXA-WAP2410A is not compatible with the NXA-WAP250G
SPECIFICATIONS
DIMENSIONS (HWD)
ONLINE www.amx.com/products/NXA-WAP2410A.asp
8 13/16” x 8 1/16” x 1 5/8” (22.4 cm x 20.6 cm x 4 cm)
WEIGHT
19.2 oz (544 g)
SPECIFICATIONS
FREQUENCY
DIMENSIONS (HWD)
2300-2500 MHz
4 1/2” L x 3” OD (11.4 cm x 7.6 cm)
INCLUDED ACCESSORIES
WEIGHT
• 3 dBi Omni-directional antenna
1 lb (500 g)
• Three foot (0.915 m) UL910 Plenum cable
FREQUENCY
2400-2485 MHz
3000 R E S EARCH D RIVE, RICH ARDSON, TX 75082 • 800.222.0193 • 469.624.7 1 5 3 f a x • TEC H NI C A L S U PPORT 8 0 0 . 9 3 2 . 6 9 9 3 261
© May 2009 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.
n e t w o r k / c o m m u n i c at i o n
NXA-WAP10C
10’ RG-58 Plenum Antenna
Extension Cable
(FG2255-26)
OVERVIEW
The NXA-WAP10C is a 10’ RG-58 Plenum Antenna Extension
Cable that allows antennas to be extended away from the source
device.
ONLINE www.amx.com/products/NXA-WAP10C.asp
NXA-WAP2413ACMB
Corner Mounting Bracket for the
NXA-WAP2413A
(FG2255-25)
OVERVIEW
The NXA-WAP2413ACMB Corner Mounting Bracket allows the
NXA-WAP2413A antenna to be mounted to indoor corner.
ONLINE www.amx.com/products/NXA-WAP2413ACMB.asp
NXA-WAP2413AMB
Mounting Bracket for the
NXA-WAP2413A
(FG2255-24)
OVERVIEW
The NXA-WAP2413AMB Mounting Bracket provides reinforced
mounting for outdoor use of the NXA-WAP2413A antenna.
ONLINE www.amx.com/products/NXA-WAP2413AMB.asp
NXR-ZGW SPECIFICATIONS
controlled via a web server interface. • Management: Built-in browser-based management with User Name/Password
authentication
• IP Configuration: Static IP or DHCP client (default is static, 192.168.1.140)
COMMON APPLICATION
• Communications: ZigBee, TCP/IP
Ideal for ZigBee devices to communicate with NetLinx Controllers
FRONT COMPONENTS
throughout residences or commercial buildings. • LEDs
- P WR/STATUS: A green LED that blinks to indicate the device is installed and
FEATURES communicating properly. Power ON, but no master connection, is indicated
• Can coexist with 802.11 wireless networks without signal with a solid light, Power OFF is indicated with no light.
- L AN: A green LED indicates an Ethernet connection is established. The LED
interference
blinks to indicate both sending and receiving information via Ethernet.
• Supports 16 wireless channels for interference tolerance - RF: The LED is solid when end devices are connected; end devices not
• Provides redundant paths of communication connected is indicated with no LED light; the LED blinks to indicate activity.
• Configurable to include or exclude a ZigBee device on the • Antenna Mount: A reverse SMA connection that supports a 2.4GHz antenna.
• ID Button: When used in conjunction with NetLinx Studio, sets the device
ZigBee network
and system numbers for the NXR-ZGW. Press and hold for approximately 30
• 802.3af PoE seconds to return the NXR-ZGW to factory default settings.
REAR COMPONENTS
ONLINE www.amx.com/products/NXR-ZGW.asp • Power connector : 2-pin 3.5mm captive-wire connector
• Power Over Ethernet (PoE) - Powers the device through the CAT5 cable. Both
T R A INING AVAILAB LE Power and Data can be transmitted simultaneous through the CAT5 cable
For im por tant ins talla t i o n, co n fi gura ti o n a n d p ro g ra mmi n g te ch ni que s, when using the appropriate equipment.
AMX Univer s ity tr aining i s a va i l a b l e . Ju st vi si t ww w.a mx.c om/pr oduc ts /
• Ethernet Port: 10BaseT Modular (RJ-45) connector - connects the NXRZGW to
NXR - ZG W. as p and click o n th e “Tra i ni ng” ta b .
your LAN and/or to connect your third party device to the LAN when the NXR-
ZGW is used as a gateway.
ENVIRONMENTAL
• Operating Temperature: -30ºC (-22ºF) – 70ºC (158ºF)
• Relative Humidity: 5% – 85% non-condensing; intended for indoor use only
CERTIFICATIONS
FCC ID: CWU-ZGW, IC ID: 5078A-ZGW, CE, IEC-60950, TELEC
INCLUDED ACCESSORIES
• Rubber feet
• Velcro mounting strip
• 2.4GHZ, MONO, RSMA, 3.5IN, 2.0DBI Antenna (70-0012-SA)
• Power Supply (24-5791-SA)
3000 R E S EARCH D RIVE, RICH ARDSON, TX 75082 • 800.222.0193 • 469.624.7 1 5 3 f a x • TEC H NI C A L S U PPORT 8 0 0 . 9 3 2 . 6 9 9 3 263
© May 2009 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.
n e t w o r k / c o m m u n i c at i o n
NXR-ZRP SPECIFICATIONS
CB-MET-ECOM
Rough-In Box for Metreau Entry
Communicator
(FG039-12)
OVERVIEW SPECIFICATIONS
Allows Metreau Entry Communicators to be mounted directly to DIMENSIONS (HWD)
studs/pre-wall. Includes a wall box and mounting screws. 4 5/8” x 3 1/16” x 1 15/16” (11.7 cm x 7.8 cm x 4.6 cm)
COMMON APPLICATION
Ideal for mounting in doorways, entryways or other locations
where visitors to a residence or commercial facililty would request
entry.
FEATURES
• Mounts directly to studs/pre-wall
• Includes wall box and mounting screws
ONLINE www.amx.com/products/CB-MET-ECOM.asp
3000 R E S EARCH D RIVE, RICH ARDSON, TX 75082 • 800.222.0193 • 469.624.7 1 5 3 f a x • TEC H NI C A L S U PPORT 8 0 0 . 9 3 2 . 6 9 9 3 265
© May 2009 AMX. All rights reserved. AMX does not assume responsibility for any errors or omissions.