Sie sind auf Seite 1von 4

European Aviation Safety Agency

Design Organisation Handbook template

Doc #

Document1

Issue

18/12/2013

Test Witness Report template

Log of issues
Issue

Issue date

Change description

001

18/12/2013

Initial issue

Doc.-No.

Test Witness Report

Revision
Date

EASA.21J.xyz

Project Reference

Page 2 of 4

This Test Witness Report form is intended to be used as template to assist applicants in applying for DOA and therefore
demonstrating the required design capability and provide a basis for the DOA applicant to produce the own Template for a
Classification for Design Changes.
The template form and text already entered are examples and shall be checked if they are appropriate and be changed
accordingly by the organisation. All text boxes should be deleted after the information is entered to produce the final DOA
form.
The required information can be presented entirely in this document, or in additional documents appropriately identified
and referred to.

Document title
Table of Content
Table of Content ........................................................................................ 2
1.

Project ............................................................................................. 3
1.1

Aircraft Type/Model ......................................................................... 3

1.2

Project no. ..................................................................................... 3

2.

Certification Specification .................................................................... 3

3.

Conformity Checks ............................................................................. 3


3.1

Test Stand Conformity and Capability ................................................ 3

3.2

Test Specimen Conformity ............................................................... 3

3.3

Pre-Test Inspection Check ................................................................ 3

3.4

Specials to Test Equipment .............................................................. 3

3.5

Instrumentation / Measurement System Calibration ............................ 4

4.

Test Witnessing ................................................................................. 4


4.1

Test Sequence ................................................................................ 4

4.2

On-Test Inspections ........................................................................ 4

4.3

Test Deviations ............................................................................... 4

4.4

Malfunctions during test................................................................... 4

4.5

Post-Test Inspection ........................................................................ 4

5.

Conclusion ........................................................................................ 4

6.

References ........................................................................................ 4

7.

Definitions/Abbreviations/Acronyms ..................................................... 4

DO-07 (11/2013)

Doc.-No.

Test Witness Report

Revision
Date

Project Reference

EASA.21J.xyz

Name / Function
Prepared

Date

Page 3 of 4

Signature

/.

Checked/
../..
approved

1. Project
1.1

Aircraft Type/Model

List here the affected product type/model.

1.2

Project no.

Reference the project no.

2. Certification Specification
List or better write down the certification specification requirements where this document demonstrates compliance
with.

3. Conformity Checks
3.1

Test Stand Conformity and Capability

3.2

Test Specimen Conformity

3.3

Pre-Test Inspection Check

3.4

Specials to Test Equipment

DO-07 (11/2013)

Doc.-No.

Test Witness Report

Revision
Date

Project Reference

EASA.21J.xyz

3.5

Page 4 of 4

Instrumentation / Measurement System Calibration

4. Test Witnessing
4.1

Test Sequence

4.2

On-Test Inspections

4.3

Test Deviations

4.4

Malfunctions during test

4.5

Post-Test Inspection

5. Conclusion
6. References
Ref.
No.

Document No.

Issue

7. Definitions/Abbreviations/Acronyms

DO-07 (11/2013)

Title

Das könnte Ihnen auch gefallen