0 Bewertungen0% fanden dieses Dokument nützlich (0 Abstimmungen)
46 Ansichten1 Seite
This research will be designed an instrument prototype which can measure concentration of gas ammonia ( NH3) in more specifically to instrument system censor designed so that require to be calibrated with calibrator which has fulfilled standard angle blocks according to regulation applied. Transfer function at this research divided to become two divisions, at low concentration and concentration of height.
Originalbeschreibung:
Originaltitel
Design and Instrument System Calibration Gas Ammonia ( Nh3) Name
This research will be designed an instrument prototype which can measure concentration of gas ammonia ( NH3) in more specifically to instrument system censor designed so that require to be calibrated with calibrator which has fulfilled standard angle blocks according to regulation applied. Transfer function at this research divided to become two divisions, at low concentration and concentration of height.
Copyright:
Attribution Non-Commercial (BY-NC)
Verfügbare Formate
Als DOC, PDF, TXT herunterladen oder online auf Scribd lesen
This research will be designed an instrument prototype which can measure concentration of gas ammonia ( NH3) in more specifically to instrument system censor designed so that require to be calibrated with calibrator which has fulfilled standard angle blocks according to regulation applied. Transfer function at this research divided to become two divisions, at low concentration and concentration of height.
Copyright:
Attribution Non-Commercial (BY-NC)
Verfügbare Formate
Als DOC, PDF, TXT herunterladen oder online auf Scribd lesen
DESIGN AND INSTRUMENT SYSTEM CALIBRATION GAS AMMONIA ( NH3)
Name Of Student : Nasrudin
NRP : 1107201709 Supervisor : Dr. Melania Suweni Muntini, MT.
ABSTRACT
Instrument system of gas ammonia ( NH3) be grader prototype concentration of gas
ammonia ( NH3) in certain area. Instrument system of gas ammonia applicable to measure concentration of gas ammonia ( NH3) at certain area.
At this research will be designed an instrument prototype which can measure
concentration of gas ammonia ( NH3) in more specifically to instrument system censor designed so that require to be calibrated with calibrator which has fulfilled standard angle blocks according to regulation applied.
Result of instrument system planning of gas ammonia in the form of transfer
function, that is between output strains to concentration and between resistance ratio to concentration. Transfer function at this research divided to become two divisions, at low concentration and concentration of height.
Transfer function for low concentration expressed in the form of V= 0,004
( volt/ppm) Q ( ppm) + 1,479 ( volt); contribution of variable concentration of to its(the rising output strain of censor equal to 97,015% and the rest 2,9 % is contribution of other variable of which is not packed into transfer function model submitted. While relation between resistance ratio to concentration of obtained transfer function R= - 0,003 S(ppm) + 0,918; with contribution of variable concentration of to lowering of output resistance ratio of sensor equal to 97,1% and the rest 2,9% is contribution of other variable of which is not packed into transfer function model submitted.
Transfer function for concentration of height expressed in the form of V= 0,028
( volt/ppm) Q ( ppm) + 0,89 ( volt); contribution of variable concentration of to its(the rising output strain of sensor equal to 99,2% and the rest 1,8 % is contribution of other variable of which is not packed into transfer function model submitted. While relation between resistance ratio to concentration of obtained transfer function R= - 0,011 S(ppm) + 1,02; with contribution of variable concentration of to lowering of output resistance ratio of sensor equal to 98,1% and the rest 1,9% is contribution of other variable of which is not packed into transfer function model submitted.
Keyword: gas sensor, concentration, transfer function, instrument system, gas ammonia ( NH3).