0 Bewertungen0% fanden dieses Dokument nützlich (0 Abstimmungen)
7 Ansichten1 Seite
This document provides instructions for building a simple ground plane antenna using a connector with a square flange, such as N-type or BNC. The radiator element is cut to a length of 234/F feet, where F is the operating frequency in MHz. Four radials are soldered at 90 degree intervals around the radiator element, with each radial 5% longer than the radiator. The completed antenna connects to a transmitter or receiver with a mating connector and 50 ohm cable.
This document provides instructions for building a simple ground plane antenna using a connector with a square flange, such as N-type or BNC. The radiator element is cut to a length of 234/F feet, where F is the operating frequency in MHz. Four radials are soldered at 90 degree intervals around the radiator element, with each radial 5% longer than the radiator. The completed antenna connects to a transmitter or receiver with a mating connector and 50 ohm cable.
This document provides instructions for building a simple ground plane antenna using a connector with a square flange, such as N-type or BNC. The radiator element is cut to a length of 234/F feet, where F is the operating frequency in MHz. Four radials are soldered at 90 degree intervals around the radiator element, with each radial 5% longer than the radiator. The completed antenna connects to a transmitter or receiver with a mating connector and 50 ohm cable.