0 Bewertungen0% fanden dieses Dokument nützlich (0 Abstimmungen)
214 Ansichten1 Seite
This document summarizes the clutches engaged and solenoids active for 1st and 2nd gear forward in a Powershift transmission with 4-wheel drive. It notes that pre-serial number 415012 machines have the 4-wheel drive clutch spring loaded in the on position, while post-serial number 415012 machines require the clutch to be pressurized to select 4WD.
Originalbeschreibung:
JCB 4cx TRANSMISSION
Gear selection, clutch and solenoids
This document summarizes the clutches engaged and solenoids active for 1st and 2nd gear forward in a Powershift transmission with 4-wheel drive. It notes that pre-serial number 415012 machines have the 4-wheel drive clutch spring loaded in the on position, while post-serial number 415012 machines require the clutch to be pressurized to select 4WD.
This document summarizes the clutches engaged and solenoids active for 1st and 2nd gear forward in a Powershift transmission with 4-wheel drive. It notes that pre-serial number 415012 machines have the 4-wheel drive clutch spring loaded in the on position, while post-serial number 415012 machines require the clutch to be pressurized to select 4WD.
Clutches Engaged Solenoids Active F - Forward Low Ratio F - Forward Low H - Layshaft H - Layshaft K - 2/4 wheel drive (see note) Note: Powershift transmissions installed in machines prior to serial number 415012 have the 4-wheel drive clutch spring loaded in the 'on' position to give 4WD, as shown at K. On machines after serial number 415012, the clutch must be pressurised to select 4WD. Refer to pages F/3-6 to F/3-9 for a description of the 4-wheel drive clutch operation. Figure 2 - 2nd GEAR FORWARD (4 Wheel Drive) Clutches Engaged Solenoids Active E - Forward High Ratio E - Forward High H - Layshaft H - Layshaft K - 2/4 wheel drive (see note above) 6 - 2 Section F Transmission 9803/3260 Section F 6 - 2 Issue 2* Descriptions * * *