principle of temperature measurement with a thermistor is that its resistance changes with temperature. THERMISTOR
NTC Devices BEAD TYPE THERMI STOR Bare Beads Gl ass Coated Beads Ruggedi zed Beads Mi ni ature Gl ass Probes Gl ass Probes Gl ass Rods Bead- i n- Gl ass Encl osures METALLI ZED SURFACE CONTACT THERMI STORS Di sks Chi ps ( Wafer s) Sur face Mounts Fl akes Rods Washer s PTC Devices
Thermistors are available that perform temperature measurement from -73 to 316 C (-100 to 600 F).
A constant temperature bath is set using two or more thermistor standards. Resistance measurements are performed using a calibrated Wheatstone bridge, digital meter or data acquisition system.
Small size Fast response Very high sensitivity No cold junction compensation Inexpensive Polarity insensitive Wide selection of sensors ADVANTAGES Unstable due to drift and decalibration (especially at high temperatures) Not easily interchangeable Non linear Narrow span Fragile High resistance, noise problems DISADVANTAGES Melting or deterioration of the semiconductor. Deterioration of encapsulation material Insensitivity at higher temperatures Difficulty in measurement at low temperatures. LIMITATIONS