0 Bewertungen0% fanden dieses Dokument nützlich (0 Abstimmungen)
9 Ansichten1 Seite
This document contains a profile drawing of an inboard boat design. It specifies an Aquamet 19 1/4 inch diameter shaft, an 18 inch diameter propeller, and 140 gallons of fuel. The drawing was created by T. Smith for Smith Marine Design on May 25, 2001 at a scale of 1 inch to 12 inches. It is the property of Smith Marine Design and requires their written consent to duplicate or distribute.
This document contains a profile drawing of an inboard boat design. It specifies an Aquamet 19 1/4 inch diameter shaft, an 18 inch diameter propeller, and 140 gallons of fuel. The drawing was created by T. Smith for Smith Marine Design on May 25, 2001 at a scale of 1 inch to 12 inches. It is the property of Smith Marine Design and requires their written consent to duplicate or distribute.
This document contains a profile drawing of an inboard boat design. It specifies an Aquamet 19 1/4 inch diameter shaft, an 18 inch diameter propeller, and 140 gallons of fuel. The drawing was created by T. Smith for Smith Marine Design on May 25, 2001 at a scale of 1 inch to 12 inches. It is the property of Smith Marine Design and requires their written consent to duplicate or distribute.
PROP: 18" DIA. 140 GALS. FUEL 6 5 7 4 NOTES: 1) ALL DIMENSIONS IN INCHES, UNLESS OTHERWISE SPECIFIED. 2) FOR FURTHER DETAILS, SEE DWG'S D-001, D-002, D-004, D-005, B-007 & B-008. 3) THESE PLANS ARE THE PROPERTY OF SMITH MARINE DESIGN AND MAY NOT BE DUPLICATED OR DISTRIBUTED WITHOUT THE WRITTEN CONSENT OF THE DESIGNER. 4) POSSESSION OF THIS DRAWING DOES NOT CONSTITUTE A LICENSE TO BUILD. A LICENSE AGREEMENT MUST BE OBTAINED FROM THE DESIGNER PRIOR TO CONSTRUCTION. 5) ANY VARIATION FROM THESE PLANS RELIEVES THE DESIGNER OF ANY FURTHER RESPONSIBILITY. MERCRUISER 5.7L CB LEANING POST 2 BASELINE 1 2 3 -1 0 SMITH MARINE DESIGN P.O. BOX 399, CRYSTAL RIVER, FL 34423 (352) 465-3123 DRAWN BY: T. SMITH TITLE: INBOARD PROFILE REV. LEVEL: DWG. #: D-016 DESIGN #: SMD-008 DATE: MAY 25, 2001 SCALE: 1" = 12" FOR: STOCK BASELINE DWL ANCHOR LOCKER 6 BASELINE 8 BASELINE