0 Bewertungen0% fanden dieses Dokument nützlich (0 Abstimmungen)
213 Ansichten2 Seiten
This lab experiment report documents the design of a virtual instrumentation alarm system for a pressure sensor. The system allows users to monitor pressure sensor readings on a graph and change the alarm set point using a numeric selector knob. It processes a simulated current input between 4-20 mA from the pressure sensor to display corresponding pressure values between 3-15 psi. An LED indicator shows when pressure exceeds the user-defined alarm set point.
Originalbeschreibung:
A report for an experiment conducted in NI LabView
This lab experiment report documents the design of a virtual instrumentation alarm system for a pressure sensor. The system allows users to monitor pressure sensor readings on a graph and change the alarm set point using a numeric selector knob. It processes a simulated current input between 4-20 mA from the pressure sensor to display corresponding pressure values between 3-15 psi. An LED indicator shows when pressure exceeds the user-defined alarm set point.
This lab experiment report documents the design of a virtual instrumentation alarm system for a pressure sensor. The system allows users to monitor pressure sensor readings on a graph and change the alarm set point using a numeric selector knob. It processes a simulated current input between 4-20 mA from the pressure sensor to display corresponding pressure values between 3-15 psi. An LED indicator shows when pressure exceeds the user-defined alarm set point.
1. INTRODUCTION This report documents the design of a virtual instrumentation for an alarm system for a pressure sensor. The system also provides users with the ability to change the set point at which the alarm is triggered. 2. FRONT-PANEL The front panel consists of a numeric knob which simulates the raw data from a pressure sensor which transmits at a current of 4-20 mA. The raw current input is then processed and translated to represent pressure between 3- 15 psi. There is also a XY graph display which shows the conversion from a current value to a pressure value. The alarm indicator comes in the form of a LED with a numeric selector allowing one to change the set point for an alarm at any point of time.