3D Model of an avocado in Inventor. Avocado Create Your own avocado half with a pit. Note that the outer skin is represented by Black Asphalt. The green band along the edge is Smooth Dark Forest Green, and the inner part of the avocado is Yellow, the pit is Walnut Natural Polish.
Strategy: The body of the avocado is a revolve for only 180 degrees. The pit is made by revolving an oval completely. To create is part you will have to understand how to create a perpendicular work plane, how to revolve, how to change the visual style to wire frame and how to create an oval (ellipse). 1. Create a standard part in inches 2. Create a new 2D sketch 3. Draw two circles that are 1.0 inch apart on the horizontal. Put one the larger circle on the Origin. The diameter of the larger circle is 1.50 (R0.750) and the smaller circle 0.75 (R0.375) Draw a tangent line between the two circles. Draw a horizontal line down the center. Delete the other half of the two circles so that you have a drawing that looks like the one below. Click on finish sketch
4. Click on the Revolve icon in the 3D tab and set the Extents to 180 deg (shown in red), Select the flat edge as the Axis of revolution and click OK. You should have the shape of a half of an avocado.
5. On the View tab select the Visual Style icon and scroll down to Wireframe. This will allow you to see the inside of the avocado. (Shown in Red)
6. In the Model Browser open the Origin folder by clicking on the plus sign next to the folder to open it. Move your mouse on to each of the work planes until you find a plane that cuts through the middle of the avocado lengthwise. (In my example it is the YZ plane it could be different in your case.)Create a new 2D sketch their and Use the Ellipse tool to draw an oval to represent the avocado pit. The dimensions use are 0.908 in the major axis direction and 0.374 in the minor axis direction (the minor axis is twice this amount or 0.748) Draw a line along the long direction of the ellipse and delete half of the ellipse.
Click on finish sketch.
7. In the 3D Model tab click on Revolve icon and select the half oval shape as the Profile and the flat side as the Axis and use a Extents of Full. And click OK
8. Go back to the View tab and change the Visual Style back to shaded. In the Model browser window turn off the work plane that is shown below.
9. Create a new 2D sketch on the flat face of the avocado and then touch the outer edge of the avocado with the Offset tool. Move the offset direction inward and create an outline around the edge of the avocado. Click on finish sketch.
10. Extrude the outline area to 0.01 and click OK. Change the color to represent the green flesh part of the avocado.
11. Your finished avocado should look something like this one.
Remember to change the color of the parts of the avocado by right clicking on the surface or the feature icon and changing the Properties appearance.