0 Bewertungen0% fanden dieses Dokument nützlich (0 Abstimmungen)
61 Ansichten7 Seiten
This document provides labeling instructions for cables at an RBS2206 cabinet and a RBS6201 cabinet. It specifies that yellow labels should be placed on jumper cables in front of the cabinets, noting the distance and location of the labels. It also provides guidelines for securing and bending feeder cables, aligning the cables straight, and the proper distance to attach yellow labels to indoor connectors and jumper cables. Finally, it states there are labeling instructions for outdoor feeders, jumpers and GSM antenna jumpers.
This document provides labeling instructions for cables at an RBS2206 cabinet and a RBS6201 cabinet. It specifies that yellow labels should be placed on jumper cables in front of the cabinets, noting the distance and location of the labels. It also provides guidelines for securing and bending feeder cables, aligning the cables straight, and the proper distance to attach yellow labels to indoor connectors and jumper cables. Finally, it states there are labeling instructions for outdoor feeders, jumpers and GSM antenna jumpers.
This document provides labeling instructions for cables at an RBS2206 cabinet and a RBS6201 cabinet. It specifies that yellow labels should be placed on jumper cables in front of the cabinets, noting the distance and location of the labels. It also provides guidelines for securing and bending feeder cables, aligning the cables straight, and the proper distance to attach yellow labels to indoor connectors and jumper cables. Finally, it states there are labeling instructions for outdoor feeders, jumpers and GSM antenna jumpers.
the RBS2206 cabinet. Take note of the distance and location of the labels RBS2206 jumper cables yellow labeling location Yellow labeling in front of the RBS6201 cabinet. Take note of the distance and location of the labels
7/8 Feeders Laying Feeder cables should secured with cable clamps. Required to bend down both 900 and 1800Mhz cables Cables must be aligned straight. Feeder clamps are close together Indoor Labeling Assignment Yellow labeling should be stick away to the connector. Picture shows the distance of the sticker from the 7/8 connector. Min distance of 5mm and maximum of 12mm Jumper cable yellow labeling. Stick the label after the shrinkable tube with distance required Outdoor Feeders/Jumpers Labeling Outdoor jumper and feeder labeling GSM antenna jumper labeling Outdoor Feeders/Jumpers Labeling