0 Bewertungen0% fanden dieses Dokument nützlich (0 Abstimmungen)
32 Ansichten1 Seite
Repeatability of indications
It is tested by weighing the same weight for several times and by calculation of Max - Min difference or standard deviation out of series of measurements. Depending on adopted or regulated requirements 6 – 10 measurements are performed.
Testing methodology is clear and it shall not be a subject of these guidelines, nevertheless it is worth to mention once again that repeatability of indications depends on ambient conditions existing in a room where the measurement is carried out.
Repeatability can be tested for the whole weighing range, e.g. 5% Max, 50% Max, 100% Max or for a weighing range within which the balance is operated. For some branch industries (pharmacy – USP 1251), it is possible to determine MINIMUM WEIGHT value, so called MSW, using the result of repeatability.
Repeatability of indications
It is tested by weighing the same weight for several times and by calculation of Max - Min difference or standard deviation out of series of measurements. Depending on adopted or regulated requirements 6 – 10 measurements are performed.
Testing methodology is clear and it shall not be a subject of these guidelines, nevertheless it is worth to mention once again that repeatability of indications depends on ambient conditions existing in a room where the measurement is carried out.
Repeatability can be tested for the whole weighing range, e.g. 5% Max, 50% Max, 100% Max or for a weighing range within which the balance is operated. For some branch industries (pharmacy – USP 1251), it is possible to determine MINIMUM WEIGHT value, so called MSW, using the result of repeatability.
Repeatability of indications
It is tested by weighing the same weight for several times and by calculation of Max - Min difference or standard deviation out of series of measurements. Depending on adopted or regulated requirements 6 – 10 measurements are performed.
Testing methodology is clear and it shall not be a subject of these guidelines, nevertheless it is worth to mention once again that repeatability of indications depends on ambient conditions existing in a room where the measurement is carried out.
Repeatability can be tested for the whole weighing range, e.g. 5% Max, 50% Max, 100% Max or for a weighing range within which the balance is operated. For some branch industries (pharmacy – USP 1251), it is possible to determine MINIMUM WEIGHT value, so called MSW, using the result of repeatability.