87%(23)87% fanden dieses Dokument nützlich (23 Abstimmungen)
15K Ansichten2 Seiten
This document provides a method statement for demolishing brick and concrete walls to create door and window openings at location C01. It outlines that an electric grinder will be used to cut the outer line of the proposed openings. A hand operated electric breaker will then be used to manually hack away the wall material from top to bottom within a cordoned off area. For brick walls, a steel lintel will be inserted before completing the opening to support the remaining structure. Water will be used to reduce dust and salvageable bricks will be reused on site.
Originalbeschreibung:
Demolition brick wall partitions by hacking method
Originaltitel
Method Statement for Demolition of Brick Concrete Walls at c01 for Door Window Opening
This document provides a method statement for demolishing brick and concrete walls to create door and window openings at location C01. It outlines that an electric grinder will be used to cut the outer line of the proposed openings. A hand operated electric breaker will then be used to manually hack away the wall material from top to bottom within a cordoned off area. For brick walls, a steel lintel will be inserted before completing the opening to support the remaining structure. Water will be used to reduce dust and salvageable bricks will be reused on site.
This document provides a method statement for demolishing brick and concrete walls to create door and window openings at location C01. It outlines that an electric grinder will be used to cut the outer line of the proposed openings. A hand operated electric breaker will then be used to manually hack away the wall material from top to bottom within a cordoned off area. For brick walls, a steel lintel will be inserted before completing the opening to support the remaining structure. Water will be used to reduce dust and salvageable bricks will be reused on site.
METHOD STATEMENT FOR DEMOLITION OF BRICK WALL/CONCRETE WALLS
AT C01 FOR DOOR WINDOW OPENINGS
Area Of work C01 Level1 and Level 2
Equipments to be used Hand operated electric breaker Electrical Grinder
Steps
1. The proposed opening outer line will be cut first with the electric grinder 2. Hand operated electric breaker will be used for the demolition by hacking method. 3. Warning tapes shall be used for the cordon of the hacking area to be demolished. Refer the figure below for the demarcation.
4. The required brick/concrete wall portion shall be hacked by manual hacking from top down. The required area to be demolished will be justified by the difference between the new architectural drawing opening size and the existing opening size. 5. For the openings on brick walls, a steel hollow section lintel will be inserted first on top of the hacking area by removing away a layer of bricks before making the opening. This process is indicated in the diagrams below.
IN OUT Demarcation by the warning tapes Wall to be demolished 1.5m 1.5m Carefully removal of the brick layer on top of the new opening New opening to be made Step 1 Plan view
6. Water shall be used during the hacking process to reduce the dust propagation. 7. Form the hacked debris, good quality bricks will be salvaged for future use. Other debris will be disposed from site
Note: The demolition areas are highlighted in the attachment
Installation of steel hollow section (120x80x3mm) prior to making the opening