Beruflich Dokumente
Kultur Dokumente
1.
The spine of wau is measured into 3 parts,
then marking the point of separation.
2.
3.
Wing that is tied will also be tied at the
marked point of wau spine.
4.
Bind at the top and bottom of the tail
spine. Make sure that the balance in both sides.
5.
Attach the end of the tail for both left and
right to the wing.
6.
For the waist of the wau, make 2 semi
circles from the bamboo stick to form a circle as
shown in Wau Bulan picture above.
7. Last process is to make the head wau with
binding half of the head with wau wing with 2inch distance from the spine.