In this example the powerhouse is constructed with FF (fictitious force) elements and the fault is constructed with DD (displacement discontinuity) elements. The DD elements are filled with an elasto-plastic gouge material that yields according to the frictional strength Mohr-Coulomb criterion. 838 surfaces were used to describe this problem. Map3D subsequently discretized the model into 5236 boundary elements. Dow nload example (ex3-t10.zip 361 KB)
ex3-t10.zip contains the analysis results pictured above.
1. Unzip ex3-t10.zip to create ex3-t10.001
2. To display these results in Map3D, use File > Open Analysis Results and select ex3t10.001
3. To display the ride on the fault use Plot > Surface Components > Ride. 4. To display the stress distribution around the powerhouse use Plot > Stress > Major Principal Stress.