ECE 3040 C Fall 2014 Microelectronic Circuits School of Electrical and Computer Engineering Georgia Institute of Technology 1. Pierret, Problem 10.4 (10 points) 2. Pierret, Problem 10.10 (10 points)
3. Pierret, Problem 11.2 (10 points)
4. Pierret, Problem 11.8 (10 points) 5. Pierret, Problem 11.9 (10 points) 6. Diode Circuit: Q-Point Analysis (15 points) Find the Q-points for the diodes in the circuit using (a) the ideal diode model and (b) the constant voltage drop model with Von = 0.75 V.
7. Half-Wave Rectifier (15 points)
A 3.3V, 30 A dc power supply is to be designed with a ripple of less than 2.5%. Assume that a half-wave rectifier circuit (60 Hz) with a capacitor filter is used. (a) What is the size of the filter capacitor C? (b) What is the PIV rating for the diode? (c) What is the rms value of the transformer voltage needed for the rectifier? (d) What is the value of the peak repetitive diode current in the diode? (e) What is the surge current at t = 0+? 8. Full-Wave Rectifier Circuit (20 points): Simulate the behavior of the shown full-wave rectifier circuit for R = 3 and C = 22 mF. Assume that the rms value of vs is 10.0 V and the frequency is 400 Hz. Use IS = 10-10 A, RS = 0 in your SPICE simulation. Compare the simulated values for dc output voltage, ripple voltage, and peak diode current to hand calculations. Repeat the simulation with RS = 0.25.