Beruflich Dokumente
Kultur Dokumente
Command: _line
Specify first point:
Specify next point or [Undo]: 297
Specify next point or [Undo]: 210
Specify next point or [Close/Undo]: 297
Specify next point or [Close/Undo]: 210
Specify next point or [Close/Undo]:
Command: _offset
Current settings: Erase source=No Layer=Source OFFSETGAPTYPE=0
Specify offset distance or [Through/Erase/Layer] <119.0000>: 20
Select object to offset or [Exit/Undo] <Exit>:
Specify point on side to offset or [Exit/Multiple/Undo] <Exit>:
Select object to offset or [Exit/Undo] <Exit>: *Cancel*
Command:
Command: _offset
Current settings: Erase source=No Layer=Source OFFSETGAPTYPE=0
Specify offset distance or [Through/Erase/Layer] <20.0000>: 5
Select object to offset or [Exit/Undo] <Exit>:
Specify point on side to offset or [Exit/Multiple/Undo] <Exit>:
Select object to offset or [Exit/Undo] <Exit>:
Specify point on side to offset or [Exit/Multiple/Undo] <Exit>:
Select object to offset or [Exit/Undo] <Exit>:
Specify point on side to offset or [Exit/Multiple/Undo] <Exit>:
Command: _trim
Command: _fillet
Current settings: Mode = TRIM, Radius = 1.5000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]: r
Specify fillet radius <1.5000>: 5
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Select second object or shift-select to apply corner or [Radius]:
Command:
FILLET
Current settings: Mode = TRIM, Radius = 5.0000
Command: _trim
Current settings: Projection=UCS, Edge=None
Select cutting edges ...
Select objects or <select all>: Specify opposite corner: 15 found
Select objects:
Select object to trim or shift-select to extend or
[Fence/Crossing/Project/Edge/eRase/Undo]:
Select object to trim or shift-select to extend or
[Fence/Crossing/Project/Edge/eRase/Undo]:
Select object to trim or shift-select to extend or
[Fence/Crossing/Project/Edge/eRase/Undo]:
Select object to trim or shift-select to extend or
[Fence/Crossing/Project/Edge/eRase/Undo]:
Select object to trim or shift-select to extend or
[Fence/Crossing/Project/Edge/eRase/Undo]:
Select object to trim or shift-select to extend or
[Fence/Crossing/Project/Edge/eRase/Undo]:
Command:
Command:
Command: _erase
Select objects: 1 found
Command: _line
Specify first point:
Specify next point or [Undo]: 1
Specify next point or [Undo]:
Specify next point or [Close/Undo]:
Pick internal point or [Select objects/remove Boundaries]: Selecting everything...
Selecting everything visible...
Analyzing the selected data...
Analyzing internal islands...
Pick internal point or [Select objects/remove Boundaries]:
Analyzing internal islands...
Pick internal point or [Select objects/remove Boundaries]: Selecting everything...
Selecting everything visible...
Analyzing the selected data...
Command: _line
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]:
Command: _line
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]:
Command: _line
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]:
Command: _line
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]:
Command: _line
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]:
Automatic save to C:\Users\dian\appdata\local\temp\Mio_1_1_9405.sv$ ...
Command: _line
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]:
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command:
LINE
Specify first point:
Specify next point or [Undo]: *Cancel*
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command: _dimlinear
Specify first extension line origin or <select object>:
Specify second extension line origin:
Specify dimension line location or
[Mtext/Text/Angle/Horizontal/Vertical/Rotated]:
Dimension text = 124.6
DIMLINEAR
Specify first extension line origin or <select object>: *Cancel*
Command: _dimlinear
Specify first extension line origin or <select object>:
Specify second extension line origin:
Specify dimension line location or
[Mtext/Text/Angle/Horizontal/Vertical/Rotated]:
Dimension text = 23.48
Command: _dimradius
Select arc or circle:
Dimension text = 24.6
Specify dimension line location or [Mtext/Text/Angle]:
Command: _dimradius
Select arc or circle:
Dimension text = 11.6
[Mtext/Text/Angle/Horizontal/Vertical/Rotated]: *Cancel*
Command: _line
Specify first point:
Specify next point or [Undo]:
Command: _mtext
Current text style: "Annotative" Text height: 2.5 Annotative: Yes
Specify first corner: *Cancel*
Command: _mtext
Current text style: "Annotative" Text height: 2.5 Annotative: Yes
Specify first corner:
Specify opposite corner or [Height/Justify/Line
spacing/Rotation/Style/Width/Columns]:
Command: _mtext
Current text style: "Annotative" Text height: 2.5 Annotative: Yes
Specify first corner:
Specify opposite corner or [Height/Justify/Line
spacing/Rotation/Style/Width/Columns]: *Cancel*
Command: _mtext
Current text style: "Annotative" Text height: 2.5 Annotative: Yes
Specify first corner:
Specify opposite corner or [Height/Justify/Line
spacing/Rotation/Style/Width/Columns]:
Automatic save to C:\Users\dian\appdata\local\temp\Mio_1_1_1694.sv$ ...
Command: _mtext
Current text style: "Annotative" Text height: 2.5 Annotative: Yes
Specify first corner:
Specify opposite corner or [Height/Justify/Line
spacing/Rotation/Style/Width/Columns]:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: _mtext
Current text style: "Annotative" Text height: 2.5 Annotative: Yes
Specify first corner: *Cancel*
Command: _mtext
Current text style: "Annotative" Text height: 2.5 Annotative: Yes
Specify first corner:
Specify opposite corner or [Height/Justify/Line
spacing/Rotation/Style/Width/Columns]:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
Command:
Command: _mtext
Current text style: "Annotative" Text height: 2.5 Annotative: Yes