Sie sind auf Seite 1von 2

ANSI/ASME A1201.

- Safety Requirements for Powered Platforms for Building


Maintenance; American Society of Mechanical

Engineers; 1996.
AA SAS 30

- Specifications for Aluminum Structures; Aluminum Association;


1986.

AISC S342L

- Load and Resistance Factor Design Specification for Structural


Steel Buildings, including the Commentary; American
Steel Construction; 1993.

Institute for
AISC S303

- Code of Standard Practice for Steel Buildings and Bridges,


including the Commentary; American Institute for Steel
Construction; 1992.

ASME A39.1
Addendum

- Safety Requirements for Window Washers; American Society


of Mechanical Engineers; 1995; Addendum 1a, 1996;
1b, 1997. (out of print)

ASTM A 36

- Structural Steel

ASTM A 123

- Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products

ASTM A 153

- Zinc Coating (Hot-Dip) on Iron and Steel Hardware

ASTM A 441

- High-Strength Low Alloy structural Manganese Vanadium Steel

ASTM A 501

- Hot-Formed Welded and Seamless Carbon Steel Structural


Tubing

ASTM B 209

- Aluminum and Aluminum-Alloy Sheet and Plate

ASTM B 221

- Aluminum-Alloy Extruded Bars, Rods, Wire, Shapes and Tubes

ASTM A307

- Standard Specification for Carbon Steel Bolts and Studs, 60


000 PSI Tensile Strength; 1997.

ASTM A325

- Standard Specification for Structural Bolts, Steel, Heat Treated,


120/105 ksi Minimum Tensile Strength; 1997.

AWS B3.0

Welding Procedure and Performance Qualification

AWS D1.1

- Structural Welding Code - Steel; American Welding Society;


2000.

AWS D1.2

- Structural Welding Code - Aluminum; American Welding


Society; 1997.11011 2

BS EN 1808

- Safety Requirements on Suspended Access Equipment

BS 2573

- Code of practice for design of carriage, mechanical


components and track

BS 5062-Part 1

- Specifications for self locking anchorages for industrial


use;1985

BS 5845

- Specifications for permanent anchors for industrial safety belts


and harnesses; 1991

BS 5974

- Code of practice for temporary installed suspended scaffolds


and access equipment

BS 6037

- Code of practice for permanently installed suspended access


equipment

CAN/CSA-Z91-M90

- Safety Code for Window Cleaning Operations; CSA


International Inc.; 1990.

CAN/CSA-Z271 -M98

- Safety Code for Suspended Elevated Platforms; CSA


International Inc.; 1998.

NFPA 70

- National Electrical Code; National Fire Protection Association;


1999.

OSHS Occupation Safety and Health Standards


- ANSI / IWCA 1-14.1-2001 Window Cleaning Safety
- 1910 Subpart D (Walking and Working Surfaces)
- 1910.66 Appendix C (Personal Fall Arrest)
- 1910.66 Subpart F (Powered Platforms)
- OSHA procedures and precautions for employees using
decent control equipment.

Das könnte Ihnen auch gefallen