Beruflich Dokumente
Kultur Dokumente
Note: Take DVR 4 channels as an example for description, 8channel and 16 channels products as
reference.
Note: SATA hard disk inside the main unit does not support hot plug, please properly connect
wires in the hard disk prior to booting.
Instructions
Button
Menu options
Instructions
PTZ settings
Wizard settings
Alarm settings
Channel settings
Display Settings
Video control
Log out system
Video playback
on the preview screen directly, you will see the "Recording Control" interface as
shown in the following picture. Select channels to be recording in the manual check boxes, press OK for
confirmation and then perform manual recording.
function description
icon
function description
Directory:
For
equipment
management,
classification
of
grouping and operation
Talkback,
intercom
Monitoring, one-way
playback audio
full screen,
playback.
picture
full
screen
real-time
two
receive
way
the
sign out
Page up
Page down
Device name: the display name that you add to the user device list, more convenient to people identify
(such as living room)
Device type: lens (the channel of the IPC, DVR\NVR), device (such as DVR\NVR)
Connection modes: (IP address and port access mode), P2P (cloud- penetration mode)
Protocol: select the front-end device protocol
Cloud ID: you can get the cloud id from the DVR, Main menu->System management->system update
Username: the login username of device
Password: device login password
Channel NO: view what channel number, start from 1. Completed IPC as 1 (if it is the device type, it is the
channel number mean: complete 8 if is 8Channel DVR)
Stream: request to a front- end device stream format while live preview, 0 is main stream,1 is sub stream,
default is sub stream.
Online installation
2.
Note: After installation, an application icon will appear in the application interface.
2. Login interface
Open the software into the login interface,
inputting the username and password and click
button login, then it will be login the application.
Detailed setting can refer to new wizard.
menu->System
management->system
update
Username: the login username of device
Password: device login password
iconSelectAdd equipment
6. Remote playback
Click
correspondingly.
video camera
Click
follows
AAdd equipment: add DVR(multi channel)
BAdd lens :add single camera(Single channel)
CModify the name: Modify equipment or lens.
D Modify IP: The modification is in IP
address
.Subnet
mask
and
the
gateway
information etc...
E Modify the equipment password.
7. Local playback
In the main menu, click local playback
option, into interface: