0 Bewertungen0% fanden dieses Dokument nützlich (0 Abstimmungen)
6 Ansichten1 Seite
Keller Magnetic Separators are in-line magnetic filters that remove iron or steel chips from coolant or oil in metalworking operations. They contain powerful rare earth magnets that attract even submicron particles. The contaminated fluid flows between the cylindrical magnets, where the magnets remove the metal chips from the flowing fluid. The cleaned fluid then exits through the discharge port with little pressure drop. The magnetic assemblies fit standard filter housings and can be easily removed and cleaned in about a minute by scraping off the collected chips.
Keller Magnetic Separators are in-line magnetic filters that remove iron or steel chips from coolant or oil in metalworking operations. They contain powerful rare earth magnets that attract even submicron particles. The contaminated fluid flows between the cylindrical magnets, where the magnets remove the metal chips from the flowing fluid. The cleaned fluid then exits through the discharge port with little pressure drop. The magnetic assemblies fit standard filter housings and can be easily removed and cleaned in about a minute by scraping off the collected chips.
Keller Magnetic Separators are in-line magnetic filters that remove iron or steel chips from coolant or oil in metalworking operations. They contain powerful rare earth magnets that attract even submicron particles. The contaminated fluid flows between the cylindrical magnets, where the magnets remove the metal chips from the flowing fluid. The cleaned fluid then exits through the discharge port with little pressure drop. The magnetic assemblies fit standard filter housings and can be easily removed and cleaned in about a minute by scraping off the collected chips.
IRON CHIPS FROM COOLANT OR OIL Get these benefits: Powerful Rare Earth Magnets Ideal For Water-Base Lubricants or Straight Oils
Flow Rates to 50 gpm
Two Different Magnetic Strength Rods Available
Inexpensive: Unique Assemblies Utilize Standard Filter Housings
Where to Use Keller Magnetic Separators:
The Keller in-line magnetic separators are ideal for metalworking operations machining cast iron or steel. Install a magnetic separator: 1. lnline downstream from the coolant pump on a CNC machine. 2. On a Keller TKO pump/skimmer unit as a prefilter to reduce solids loading on the cartridge filter. 3. To remove chips from a sump continuously in an external pumping circuit. Consult Keller for recommendations.
How they work:
Contaminated fluid flows past the pair of cylindrical magnets. The 2000 Gauss or 5000 Gauss rare earth magnets can attract even submicron particles of iron or steel. The fluid enters through the flow passage between the two magnets and the clean fluid exits through the discharge port of the housing, with very low pressure drop. To clean, remove the magnetic assembly from the housing. Scrape the collected chips into a disposal drum. Cleaning time: about 1 minute per magnet. How to Select the Correct Magnet and Filter Assembly: First, select the strength magnetic rod that satisfies the application requirements. For moderate solids loading, choose the economical diameter magnetic rods rated at 2000 Gauss each. For heavy solids loading, select the 1" diameter magnetic rods rated at 5000 Gauss each. Magnetic assemblies are supplied to fit standard nominal 10" filter cartridge housings. Select below from the housing assemblies supplied by Keller Products, or purchase a magnetic assembly for use in any other 10" filter housing.
Power of Habit: The Ultimate Guide to Forming Positive Daily Habits, Learn How to Effectively Break Your Bad Habits For Good and Start Creating Good Ones
The Complete HVAC BIBLE for Beginners: The Most Practical & Updated Guide to Heating, Ventilation, and Air Conditioning Systems | Installation, Troubleshooting and Repair | Residential & Commercial