The Biogas dehumidification system mainly consists of one heat exchanger and a
chiller unit. Once the capacity of the chiller/tonne of refrigeration is determined,
the heat transfer area can be deduced from the available data. The objective of the dehumidification system is to bring down the moisture content of the gas which is normally in a saturated condition to below 70 or 60 % relative humidity of the inlet gas. The latent heat of condensation is absorbed by the cooling water in the tube side. The condensate produced in the shell side is drained out by an automated
The exhaust gas from the RMP process utility is fed to the venturi gas inlet and the scrubbing medium which is