‘The 140G All Wheel Drive improves motor grader
performance in traction limited applications through:
@ High working speeds — up to 25.7 kn/h/16 MPH
for snow
Increased ditch cutting and front end slope
control
& Improved steering, less front end drift, and
improved side draft control
A manual lever allows the operator to vary front
wheel torque to match operating conditions. The front
wheel drive system operates through fifth gear;
freewheels in sixth gear.
CUSTOM PRODUCT by catenPiitar
1406
ALL WHEEL DRIVE
MOTOR GRADER
140G All Wheel Drive Motor Grader, includes the
standard 140G arrangement plus All Wheel Drive
modifications.
‘At 2200 RPM:
Normal Operation
1-2Gears
3-6 Gears
Heavy Duty Operation (All Whee! Drive)
All Gears 134 kW/180 HP
‘Note: For standard specications and features, lero 40 epectication choc.
Machine shown may Include optional equipment.SPECIFICATIONS
The front wheel drive system is
activated by the on/off switch.
A light on the console reminds
the operator that the system is on.
The manual control lever allows.
the operator to adjust the
hydraulic pressure which controls
wheel torque
1 Gauges let the operator know
precisely how much pressure is
going to the front wheels.
CI Engine
At 2200 RPM:
Normal Operation:
Gears 1-2
2kW/150 HP
Gears 3-6 sees. 134 kW/180 HP
All Wheel Drive:
Gears 1-6... 134 kW/180 HP
Weight (approximate)
Basic operating weight includes lubricants,
coolant, full fuel tank, operator, 3658 mm/12!
ual sideshift, 14.00-24, 10 PR (G-2)
,, and low profile ROPS cab,
5630 kg/12,400 Ib
10 440 kg/23,000 Ib
blade with m:
traction-type ti
Weight on front wheels
Weight on rear wheels...
Total Weight... Jensen 16 070 g/85,400 Tb
Add weights of additional equipment from
‘Attachment Selection list of standard 140G
specification sheet to obtain total equipped operating
weight.
Wheels
Front rim and wheel assemblies are non-
interchangeable, Tubeless tires, six 14.00-24,
10 PR (G-2) traction-type.
Optional wheels: 254 mm X 610 mm/10" X 24” and
360 mm X 635 mm/14" X 25",
Hydraulic System
The front wheel drive system uses the same
hydraulic tank as the implement system. A
100 cm‘/6.1 in variable displacement, axial piston
pump drives a 1640/655 cm’ / 100/40 in? low speed,
high torque motor in each wheel. Flow divider valves
ensure both wheel motors turn at all times,
maintaining tractive effort to both front. wheels.
In gears one through three, the wheel motors operate
at 100% displacement, providing high torque for big
blade loads. In gears four and five, the wheel motors
operate at 40% displacement providing a high speed
range. In sixth gear the motors freewheel, then re-
engage when the system is downshifted. Concise
control of the front drive system, through the manual
control lever, allows the operator to match front
wheel torque to every specific job situation
Gear 2 3 4 5 6
km/h. - 62 98 16.2 26.0 41.0
MPH 24 39 61 10.0 16.1 25.5
Wheel Motor Displacement
com? .. 1640 1640 1640 655 655 *
ins, . 100 100 100 400 *
FreewheelA Equipment
Air Conditioner, complete. Includes
heater and pressurizer, plus 75 amp
alternator. (Condenser mounted on
rear face of cab)
Air Dryer.
Alternator (75 amp)...
Blades:
Hydraulic sideshift;
With tip control
4.3 m/14' ..
3.7 m/12"
Without tip control
4.3 m/14'
3.7 m/12"
4.0 m/13" (requires 8W2402 or 8W2403)
4.0m X 686 mm X 25 mm/
13' X27" X 1"...
4.0 m X 610 mm X 25 mm/
18° X24" 1"...
Blade Float (hydraulics)
Independent right-hand!
left-hand ...
Blade Lift Accurmulator
Cab, ROPS (full-height)..
Circle Drive Slip Clutch.
Cutting Edges:
For 4.3 m/14' blade
For 3.7 m/12" blade .
Defroster (fan):
Front window
Rear window...
Differential (tandem drive train with
lock-unlock)
End Bits......
Engine Compartment Doors...
Fuel Tank
(378.6 liter/100 gal capacity)...
Gauge (fuel level)
Standard 283.9 liter/75 gal tank
Custom 378.6 liter/100 gal tank
ka
133
18
362
288
265
191
45
36
30
34
110
43
uw
110
91
Lb
294
39
uw
799
635
585
421
100
66
15
243
120
20
161
148
Kg Lb
Guard (transmission) ... 177 891
Heater, cab (includes pressurizer) 3476
Hydraulic Systems... * &
Lights:
Work lights (2 front, 2 center! . 6 B
Cab directional and headlights... 9 20
Cab directional, headlights and
bar-mounted flood.. oss WB 88
Bar directional and headlights... 9 20
Warning light (rotating beacon)... 3B 6
Push Plate (front-mounted)... 5 1,127
Scarifier:
Vetype (11 teeth: 814 1,795
Straight-type (1 " 28
Seat (shock dampening) . 59 180
Starting Aids:
Engine coolant heater..ccnusenene 1 8
Starting System
(low-temperature)... . 95 209
Steering System (supplemental)... 63 189
‘Tachometer {engine speed)... a7
‘Tires (optional):
14.00 X 24
12 PR (G2)... 41 90
RL-2F or XGL. 343 756
17.5 X 25 (require 324877 | wheel rims)
12 PR (L-2)... 95 209
RL-2F or XGL 309 680
‘Tires (omission). “512 -1,128
‘Vandalism Protection . 8 19
Wheel Rims, 356 mm/14" (set of six)
In place of standard
254 mm/10" rims.. 176 387
Wiper (rear windo
Full-height cab 4.8
Standard low-profile cal 4° 8
*See hydraulic systems chart on next page.CUSTOM PRODUCT ar cme ————--— 4) G
ALL WHEEL DRIVE
MOTOR GRADER
Hydraulic Systems (Include valves and operating linkage.)
Side Front Fear | Angle Dozer|__ Snow Wing (valves) System ‘Wei
Shift Scarifier | PlowiDozer | Ripper _| (High Flow) |Nrml. Flow | HighFiow | Number | kg | Ib
7 : sweses | 19 | 41
7 7 .- sw24ii | 40 | 88
a . . | ew2305_ | 29 | 63
2 7 7 2 sw2389 | 51_| 12
2 2 2 = 2 sw2390 | 61_| 135
= : o . 74846 | 50 | 110
7 : = | sz4830 | 54 | 119
7 7 7 37482832 | 70
7 7 . i i sza5oa | 51 | 112
7 : 7 a 74833 | 60 | 133
. 7 . 7 2 szas29 | 67_| 148
. 7 oI . 1 i 74831 | 67 | 148
. : 7 7 74851 48 | 106
: : 7 7 74837 | 41_| OF
7 7 : 7 7 azasa7 | 58 | 127
7 7 7 1 74854 | 57_| 195
7 7 74838 | 42 | 93
. Z 7 szasas | 36 | 74
/ 7 : = 7 224885 | 58_| 127
. : 7 . a 1 374598 | 60 | 133
. . 8zag06__| 29 | 65
7 . 7 7 3 szao47 | 70 | 154
“Change in operating weight.
NOTE: Machine can be equipped with one system only.