Sie sind auf Seite 1von 2

Feb 14

1. The oil pressure indicator usually shows


1.
2.
3.
4.

Engine oil pressure


Engine oil pump dischare pressure
Quantity of engine oil
All

2. An immediate shunting of fuel from nozzlewhen the engine is shut down xxxxxxxxx simplex fuel
nozzle by the
1. Staging valve
2. Priority valve
3. Check valve
3. The purpose of three dimensional cam in fuel control computer is
1.
2.
3.
4.

To hold TIT near its allowable limit by providing a predetermined fuel schedule
Prevent compressor surge
prevent compressor stall
All

4. What is the purpose of last chance of fuels


1. To prevent damage to oil spray
2. To filter the oil immediately before it enters the main opening
3. To assure a clean supply of oil to lubrication system
5. MTCS
1.
2.
3.
4.

A Full Authority Digital Electronic Control, controls the hydro mechanical fuel control
A Full Authority Digital Electronic Control does not controls the hydro mechanical fuel control
The thrust setting for a FADEC engine is N2
All

6. After continuous operation, the oil quantity keeps on increasing instead of decreasing the system is
suspected to
1.
2.
3.
4.

Breather lines
FCOC
Fuel ingestion at bearing
All

1.

Das könnte Ihnen auch gefallen