Beruflich Dokumente
Kultur Dokumente
08 AutoCAD 3
Isometric
Changing isoplane
Right
Top
Left
Isometric quarter circle and semi circle can be drawn using ellipse arc command
Draw ellipse arc > isocircle
Draw ellipse
arc
Draw another
ellipse arc
After
Trim
Draw straight
line from
midpoint of
top arc to
midpoint of bottom arc
Trim
Trim
Dimensioning
Aligned dimension
Quick leader
To make dimension aligned with isometric axes, follow few steps as:
- Type DIMEDIT
- Type O for Oblique
- Select the dimension to be aligned, then Enter
- Specify the obliquing angle
For example, using the object above, for clockwise alignment such
as 90, type 30 for the angle, whereas for 100, type -30 for the angle
since anti-clockwise alignment.
Dimensioning for
Select Quick leader icon
Isocircle
Select the circle, then extend the leader line to appropriate
direction, click, then make short extension in horizontal direction,
click,then type corresponding value (example: R20)
for the dimension.
Conclusions
What has been covered today:
08 AutoCAD 3
What is next?
You will complete the Tutorial on creating
Isometrics.
After completing the Tutorial and turning in
your print. You will revisit Packet 2 and 3.
You will complete 6 total Isometrics for the
two packets (your choice on which 6).
Each is worth 10 points. Dimensions
MUST be included.