Beruflich Dokumente
Kultur Dokumente
Promotional Slides(V100R005C00SPC100)
December 2014
Huawei Confidential
Contents
1
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
HUAWEI Confidential
Page 2
; 5%
RTWP ; 2% ; 18%
; 18%
Rework
; 15%
; 42%
Case:
Transmission and remote deployment conditions are not met at the earlier stage of a delivery project. To meet the deadline, 200 sites are
installed. After sites go online later, only 50 sites are working properly and the other 150 sites have alarms, such as standing wave alarms,
optical alarms related to no TX/RX optical modules, and low or high optical power alarms.
Therefore, these 150 sites are handed over to the supervisor and subcontract to go to site multiple times by using laptop computers and
professional construction tools. This wastes costs and delays the progress.
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
HUAWEI Confidential
Page 3
ALL (USB flash drive, DT mobile phone, camera, GPS, barcode scanner, alarm board, paper, and pen
among others) in ONE (smartphone)
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
HUAWEI Confidential
Page 4
WDT functions
Script
Software
Note: Subcontractors do not need to load any functions. They can use the functions
only by clicking the corresponding buttons.
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
HUAWEI Confidential
Page 5
One-click self-check:
WDT functions
Android Terminal
VSWR
PIM
Cross Feeder
CPRI
Rectify faults
onsite.
One-click
self-check
Note: Subcontractors do not need to load any functions. They can use the functions
only by clicking the corresponding buttons.
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
HUAWEI Confidential
Page 6
WDT functions
Trans-link
Auto Ping
Auto TRACERT
Trans error detect
One-click transmission
fault location
Note: Subcontractors do not need to load any functions. They can use the functions
only by clicking the corresponding buttons.
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
HUAWEI Confidential
Page 7
WDT functions
Wizard-based photographing
and one-click report
generation:
Subcontractors can achieve wizardbased photographing based on a
customized list, thereby preventing
some photographs from being
missed. The WDT automatically
takes photographs and renames
and sorts the photographs.
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
HUAWEI Confidential
Page 8
Base Station
Commissioning
Data
Loading
WDT Functions
1. Software, configuration file, and license loading
Site
Acceptance
costs
Accelerate the project delivery
progress
6. Operation log
1. Radio parameters, service verification, and site
navigation
2. Acceptance photo-taking
3. Acquisition of GPS data
to a site significantly
Collect information correctly and
efficiently
Report
Tool
Effect
1. Operation replay
2. Automatic generation of acceptance reports
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
HUAWEI Confidential
Page 9
Acceptance or survey
documentation
The customization period
is less than one week.
Trans
mit ph
ot
such ographs ba
as em
c
ail, SM k through
m
S, or
net dis ethods
k.
Base station
OMC
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
HUAWEI Confidential
Page 10
Transmission faults are avoided, software commissioning engineers are no longer required, and the project team does
not need to pay frequent site visits. This improves delivery efficiency, reduces the number of site visits, and ensures
delivery progress.
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
HUAWEI Confidential
Page 11
HUAWEI Confidential
Page 12
Model
1 TP-LINK TL-MR12U
Taobao: Www.taobao.com
Amazon: www.amazon.com
2. Other AP lists (The external power is used and the AP obtains power from the USB
port on the control board.)
Note: The UMPT board has no USB interface, and APs with external power supply cannot obtain power
from the UMPT board.
ID Model
1 TP-Link WR702N
POWERLINK AP2403
or
POWERLINK PTAP2403
3 B-Link BL-MP01
Configurat
ion Item
Supported
standards
and
protocols
Work mode
AP mode
settings
RET type
Transmissi
on
efficiency
Work
voltage/Cur
rent
Charging
cable
Port
Built-in
battery
Configuration
Requirements
IEEE 802.11 b, 802.11 g,
802.11 n
AP mode
The default is AP, and the IP
address is automatically
configured. It can be
manually switched to the AP
by pressing the handover key.
Built-in antenna
11 b: 11 Mbit/s, 11 g: 54
Mbit/s, 11 n: 150 Mbit/s
DC 5 V/500 mA
USB cable
Ethernet port
Greater than 5200 mAh
Amazon: www.amazon.com
Note: Theoretically, all APs in the market support self-supplied power. However, some AP vendors set built-in firewall and password
by default.
If you
find that theCO.,
WDT cannot log in to the base
station or cannot upgrade the software, disable the default settings and
HUAWEI Confidential
HUAWEI
TECHNOLOGIES
Page 13
HISILICON
SEMICONDUCTOR LTD.
password of the AP firewall.
Huawei Confidential
Copy WDT.apk to the root directory of the smartphone and click to install.
2. Scan the following two-dimension code and download the installation package:(Print QR Code on paper)
Click to install after download successfully.
QR Code
Folders
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
Page 15
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
2. Offline applying
a. Obtain Device ID from
b. Send to administrator Wei Jie 00190129, Li Wuyang 00186135
Note: Provide your project information while sending email.
c. Copy license file to smart phone.
d. Import file and start to use WDT.
Page 16
GUI
Phone does not require to pre-connect Wi-Fi, Please click "Deployment" icon and then to select Wi-Fi
signal, then can connect AP and login station.
2. WDT start
Click the SDT icon, select the RAT of base stations you want to log in to, and select the site where the configuration file is saved. The navigation page is displayed.
According to standard, software version and control board to select the corresponding "Select Mode" option, please refer to the following table.
Recommended
Logging RAT
RAT
Selection
GSM
GSM
HuaweiBTSInfo / GSM
WMPT
UMTS
UMTS
HuaweiBTSInfo / UMTS
LMPT
LTE
LTE
UMPT
GSM/
UMTS/
LTE/
GU/
GL/
UL/
GUL
BTS3900
Micro UMTS,
Micro LTE
Micro
Lampsite
UMTS,
Lampsite LTE,
Lampsite UL
Lampsite
Base
Station
Type
GTMU
BTS3202E/
BTS3203E/
BTS3902E/
BTS3803E
LAMPSITE
Path
HuaweiBTSInfo / LTE
HuaweiBTSInfo /
BTS3900
HuaweiBTSInfo / Micro
HuaweiBTSInfo /
Lampsite
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
HUAWEI Confidential
Page 17
One-click deployment
Visible progress and status
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
HUAWEI Confidential
Page 18
The visibility of IP transmission deployment process allows you to locate faults quickly. It reduces the time from 20-minute to 1.
Red, yellow, and green lights indicate task results, providing a simple and direct view. You can expand them to view details.
Note: Create site NE icons on the M2000 to ensure that the status of 1. OMCH/OML Information is in green, indicating connected.
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
HUAWEI Confidential
Page 19
The input-free function automatically reads the next hop IP address of the base station and the IP addresses of the BSC and
M2000. The ping and Tracert tests can be executed multiple times.
You can manually change and type the IP address, and check service IP addresses.
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
HUAWEI Confidential
Page 20
Automatic tests
No rework during the antenna construction
The WDT allows you to test the VSWR, intermodulation, and antenna cross feeder connection functions.
Commands are automatically executed and results are displayed in red, yellow, and green, providing a direct and simple view.
Note: After the software and configuration data is download, base stations are restarted. Wait for 12 minutes and then enable the antenna check
function. Software of RRUs takes effect slowly. It takes 12 minutes for three 8-channel RRUs to take effect.
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
HUAWEI Confidential
Page 21
Meaning of signal
green not interfered
red interfered
yellow execution failed
HUAWEI Confidential
Page 22
The GBTS does not support the board, optical power, cell, and GPS check at the local end.
Board status
Optical power
Export the base station equipment archives, and check whether the material record
information is consistent with the actual situation.
You can perform dialing tests of simple services by blocking or unblocking a cell.
By blocking cells to
ensure the phone stay
at the target cell,
In order to do service
tests.
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
HUAWEI Confidential
Page 24
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
HUAWEI Confidential
Page 25
Error commands are identified and you know the execution progress and return packet at a glance.
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
HUAWEI Confidential
Page 26
Site deployment logs display operation processes and records related to base stations.
Each operation is
recorded precisely,
allowing you to
trace and locate
operations easily.
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
HUAWEI Confidential
Page 27
After site deployment is complete, data is automatically uploaded to the OMC engineer email.
Sender and recipient emails are configurable. The sender email box must be Gmail.
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
HUAWEI Confidential
Page 28
Location of Replay
files on phone
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
HUAWEI Confidential
Page 29
Fixed entry photo-taking: The mobile phone displays pre-configured entries on the screen. Workers take phones one by one based on these entries.
Random fault photo-taking. Take photos of all faults. Fault photos can be uploaded in real time, facilitating fault locating in time. Photos can be
selected and descriptions can be added to photos.
These entries can be customized. Photos are taken based on these entries. No photo is missing or
improperly taken. Photos can be compressed or edited.
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
HUAWEI Confidential
Page 30
Workers scan bar codes based on pre-configured ESN entries. The function supports one-dimension
and two-dimension code scanning.
The site name, RAT, and ESN name are automatically added before the ESN and then sent to OMC engineers by SMS or email. For example,
Site78_GSM_BBU:210305394710CB001076.
The BBU ESN can be used in ESN binding during the M2000 PNP deployment in real time. This avoids the inefficiency and errors of manual ESN reading.
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
HUAWEI Confidential
Page 31
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
HUAWEI Confidential
Page 32
Allows you to view brief information about radio parameters,such as radio parameters of GSM,UMTS,LTE,and Wi-Fi.
You need to log in to the base station to obtain PCI parameters of the LTE.
The short message sending and receiving, MMS message sending, calling test, the HTTP test, and the FTP uplink and
downlink tests are supported.
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
HUAWEI Confidential
Page 33
Set preferred
network
mode
Block other
cells
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
Log in to the
site to obtain
PCI
(Optional)
HUAWEI Confidential
Set parameters of
SMS,calling
test,FTP,HTTP
Page 34
Result table
The short message sending and receiving, MMS message sending, calling test, the
HTTP test, and the FTP uplink and downlink tests are supported.
SMS,MMS
message sending
And receiving
Calling test
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
FTP
uplink and downlink
HUAWEI Confidential
HTTP test
Page 35
Result
Download software
package and so on,
Re-download them when
changes on server
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
HUAWEI Confidential
Online
upgrading
Upload logs to
server
Page 36
http://support-trial.huawei.com/onlinetools/sdtrp/project.action
It provides the APP uniform access, site deployment data transmission, site deployment result send-back, terminal APP automatic updating, and terminal APP license
management for the site deployment through smartphones.
ID
Type
Function
Management of site
deployment files
Terminal
configuration
Site
deployment
managemen
t
Special
Requirements
Description
Provide the function to upload and delete site deployment files (such as site configuration files, software packages,
and license files).
Provide the function to configure the terminal APP parameters (such as the AP connection, base station settings,
photographing items, ESN items, SWR thresholds, RET antenna, GSM self-defined alarms,
undercurrent/overcurrent alarm settings, business validation, Email and SMS, and staff information) and transmit
the data to the terminals based on actual project conditions.
None
None
The terminal
must be able to
access the
network.
Provide the function to query site deployment result files (such as the ESNs, GPS, site deployment logs, fault
photos, acceptance photos) and download the site deployment result files through terminals.
Assignment of the
site deployment
terminals
Provide the function to assign the sites to designated terminals for site deployment (for example, assign multiple
sites in a batch to one terminal for sites deployment).
Terminal online
registration
Provide the function that the terminals register to the SDTRP server and then be added after being audited by the
user.
Manual adding of
site deployment
terminals
Provide the function to manually add the terminals one by one based on the terminal IMEIs or import multiple
terminals in a batch using an Excel file.
Extension of terminal
validity term
Provide the function to manually extend the terminal validity term and to extend the terminal validity term after
auditing its application for extending its validity term on the SDTRP server.
The terminal
must be able to
access the
network.
Provide the function to export the offline license file that is controlled by the terminal validity term.
None
Provide the function to upload the terminal APP installation packages and update the APP version.
None
7
8
9
Terminal
managemen
t
Exporting of offline
license
Terminal APP
management
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
HUAWEI Confidential
Page 37
The terminal
must be able to
access the
network.
Provide the function to create projects, create sites, upload and delete site deployment files
(such as site configuration files, software packages, and license files).
Provide the function to query site deployment result files, or to filter by sitename , status and time.
Create
a project
Filter function
Create
a site
Site list
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
HUAWEI Confidential
Page 38
Provide the function to set the starting device number, reduce configuration difficulty.
upload files
Undercurrent/Overcurrent
threshold
Edit WDTConfig.txt
Save as
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
HUAWEI Confidential
Page 39
Administrator online add and audit and transfer terminal, provide the function to bulk upload terminal list.
Upload the WDT installation package, prompts terminal to download and update.
Add
terminal
Online license
applying
Update
WDT
version
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
HUAWEI Confidential
Page 40
The mobile phone uploads deployment data in real time. The server displays deployment GUIs
synchronously, facilitating fault locating and communication.
Copies the deployment data folder HuaweiSDTData in the root directory to the PC.
Replays deployment data on the PC and stimulates mobile phone GUIs to reproduce previous
onsite GUIs.
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
HUAWEI Confidential
Page 41
The tool reads data generated during the deployment, such as deployment logs, site photos, ESNs, GPS
information, and service test data, automatically generates professional, neat, systemic, and comprehensive
reports, and submits them to telecom operators.
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
HUAWEI Confidential
Page 42
96.174_DBS3900
WCDMA.xlsx
Thank you!
HUAWEI
TECHNOLOGIES
CO., LTD.
HISILICON
SEMICONDUCTOR
HUAWEI Confidential
Page 43