0 Bewertungen0% fanden dieses Dokument nützlich (0 Abstimmungen)
20 Ansichten1 Seite
Our project work is "PNEUMATIC OPERATED BEARING PULLER" it can be used all production industries. In semi automation a combination of manual effort and mechanical power is required whereas in full automation human participation of very negligible.
Our project work is "PNEUMATIC OPERATED BEARING PULLER" it can be used all production industries. In semi automation a combination of manual effort and mechanical power is required whereas in full automation human participation of very negligible.
Our project work is "PNEUMATIC OPERATED BEARING PULLER" it can be used all production industries. In semi automation a combination of manual effort and mechanical power is required whereas in full automation human participation of very negligible.
Our project work is PNEUMATIC OPERATED BEARING PULLER it can
be used all production industries. This is an era of automation where it is broadly defined as replacement of manual effort by mechanical power in all degree of automation. The operation remains an essential part of the system although with changing demands on physical input as the degree of mechanization is increased. Degrees of automation are of two types, viz. Full automation Semi automation In the early years of industrial revolution pulling of tools was anything but systematic. But as more and more sophisticated machinery were developed a whole range of pullers were delivered to the heavy works in the quantities and at speeds appropriate to the situation. Detachable bearing pullers provide an efficient means for the removal of gears, bearings, wheels, pulleys and other press fit parts. Screw and nut methods controlled means of applying force without the need for hammering, heating. In semi automation a combination of manual effort and mechanical power is required whereas in full automation human participation of very negligible. Pneumatic system is used to most important process of Industries and Harbor. Any work done by Pneumatic system, Ex: Lifting, Pulling, Pushing, Pressing, etc., above process can be made to easily vide by Pneumatic system. In this method of machineries work is designed through Air Pressure. So these processes are used to all kinds of work. All types of works can be successfully finished for this Air pumping pressure-creating method. Pneumatic pump and Pneumatic cylinder are used this process. Pneumatic cylinders ram is increase and decrease operation finished in this process.