Beruflich Dokumente
Kultur Dokumente
1
1. The separation between the member to be joined at the root of joint is called :
a. Root face
b. Root opening
c. Bevel angle
d. Groove face
2. What is the heat input (in kJ/mm) of SMAW welding with 180 Ampere, 26 voltage and 120
mm/mnt travel speed:
a. 2.84 kJ/mm
b. 3.84 kJ/mm
c. 2.34 kJ/mm
d. 3.34 kJ/mm
3. Below are some personnel who may perform visual inspection, except :
a. Welding Supervisor
b. Welding Inspector
c. Marketing Leader
d. Welders
4. Welder qualified using 8 NPS Sch 80 (1/2 thickness) is qualified to weld thickness up to:
a. 1 max
b. 2 max
c. 3 max
d. Unlimited
9. Low hydrogen electrode conforming to AWS A 5.1 shall be baked for at least two hours
between temperature:
a. 260 C to 430 C
b. 370 C to 430 C
c. 260 F to 430 F
d. 370 F to 430 F
10. What is the meaning of visual inspection, choose the most correct:
a. A method to inspect the welds
b. A method to satisfy customers requirement
c. A method to satisfy welding code/specs
d. A method for identifying weld surface flaws and imperfections.
14. If the electrode has the AWS no E-8018-C1 H4, what does H4 mean:
a. The electrode has max. 4 ml hydrogen in 100 gram weld
b. The electrode has max. 4 ml carbon in 100 gram weld
c. The electrode has max. 4 ml water in 100 gram weld
d. The electrode has max. 4 ml helium in 100 gram weld