Beruflich Dokumente
Kultur Dokumente
INTRODUCTION
Organic-mineral two components resin foam, characterized by excellent chemical stability, mechanical
resistance and good adhesion on rock, suitable to fill the hollow-spaces behind the ashlars, cavity filling,
protection and water proofing of reservoirs and aqueducts, water conveyance in water bearing stratum.
The reaction between the two components (A and B) proceed very quickly (in 15 30 at + 20 C) with
an expansions factor 4 in comparison with the initial volume (considered = 1).
Strength of the resulting injection body depends on soils compactness degree and on volume of the
cavity to fill, as well as injection pressure.
Foaming reaction doesnt suffer from presence of water. GLOBALFOAM 3V is self extinguishing,
absolutely non-toxic and non-pollutant.
TECHNICAL PROPERTIES
(at +20C and 60% R.H.)
Chemical composition of component A
Chemical composition of component B
Specific gravity of component A
Specific gravity of component B
Viscosity of component A
Viscosity of component B
pH component A
pH component B
Colour component A
Colour component B
Mixing ratio (A+B)
Temperature of application
Application
Start of reaction
Complete reaction
Max. reaction temperature
Compressive strength (Kg./cm2)
Shelf life
NOTE
Both components A and B should be well stirred before use, in order to homogenize the settled additives.
Viscosity of component A can greatly increase at temperatures lower than + 5 C.