This is a common error especially if you have power surges or outages, before calling in follow the following steps:
1. 2. 3. 4. 5. 6. 7.
Press Down Arrow
Press * press # select SOS1 switch the first digit from a 0 to a 1 press OK Press the Red Stop button
Now you need to clear the error
1. press the down arrow 2. Press # 3. press the letter T ( on the keyboard of the printer) It should reboot itself although it may not, if it doesn't then turn off the switch then back on. you should see some black bars flashing on teh screen. This clears the error and wil help determine if the fuser is actually broken. Before you print and start using it you have to set it back to operational mode by doing the following steps 1. 2. 3. 4. 5. 6. 7.
Press the Down Arrow
Press * Press # select "SOS1" Change first digit from 1 back to 0 press OK Press the red stop button
Those are the steps required to clear the fuser temp error from the okidata support desk