Beruflich Dokumente
Kultur Dokumente
xls" Program
Version 1.7
Checker:
Input Data:
Wind Speed, V =
Bldg. Classification =
Exposure Category =
Ridge Height, hr =
Eave Height, he =
Building Width =
Building Length =
Roof Type =
Topo. Factor, Kzt =
Direct. Factor, Kd =
Enclosed? (Y/N)
Component Name =
Effective Area, Ae =
90
II
C
53.33
20.00
200.00
250.00
Gable
1.00
0.85
Y
Girt
208
Plan
hr
he
qo
Elevation
18.43
36.67
deg.
ft. (h = (hr+he)/2, for roof angle >10 deg.)
1 of 3
"ASCE702W.xls" Program
Version 1.7
For z = hr:
For z = he:
For z = h:
20.00
36.67
Component
Girt
1.02
1.02
18.06
18.06
17.11
17.11
-18.91
-18.91
17.11
17.11
-20.13
-20.13
Notes: 1. (+) and (-) signs signify wind pressures acting toward & away from respective surfaces.
2. Width of Zone 5 (end zones), 'a' =
14.67
ft.
3. Per Code Section 6.1.4.2, the minimum wind load for C&C shall not be less than 10 psf.
4. References : a. ASCE 7-02, "Minimum Design Loads for Buildings and Other Structures".
b. "Guide to the Use of the Wind Load Provisions of ASCE 7-02"
by: Kishor C. Mehta and James M. Delahay (2004).
2 of 3
"ASCE702W.xls" Program
Version 1.7
3 of 3