Beruflich Dokumente
Kultur Dokumente
Dual-Band Combiner
FINGU
Technical Data
cal
VSWR
Max insertion loss
Max insertion loss
Power handling
Peak Power
Isolation
RET signal insertion loss
RET signal VSWR
DC path insertion loss
PIM
Work temperature
Application
Impedance
Special features
Mounting
Module size
WHD
RF connectors
Lightning
Weight
spec
1.2 ( 806~960/ 1710~2170MHz)
0.2dB (806~960MHz)
0.3dB (1710~2170MHz)
200W ( 806~960/ 1710~2170MHz)
0
1000W ( 806~960/ 1710~2170MHz / Barometric pressure 0.545atm / Temperature75 C / Keep
time10 Minute )
40dB 806-960MHz
55dB 1710~2170MHz
0.3dB 2.176MHz
1.3 2.176MHz
11V
155dBc 3rd order 220W tone
-40 ~75
outdoor (IP 67)
50
DC by-pass function (max. 10 A)
Wall mounting: With 4 screws (max. 8 mm diameter)
Mast mounting: With clamp set (to be ordered separately) suitable for masts with 30 ... 125 mm
diameter
172.8mm142.2mm270.9mm (double unit, including connectors and mounting baskets).
7-16 female
After lightning test, the combiner module should work normally
5.5kg
Model Number
DC by-pass
Double Unit
29680013
1710~2170MHz DC by-pass
Double Unit
29680025
Single Unit
29680014
Single Unit
29680021
ALL ports
Double Unit
29680047
806~960MHz DC by-pass
Single Unit
29680048
806~960MHz DC by-pass
ALL ports
DC by-pass
1710~2170MHz DC by-pass
DC by-pass
1710-2170MHZ 806-960MHZ
Mounting description
Description
Expansion Bolt
Clam p set
Spec
M8*60
30~125m m
Dual-Band Combiner
FINGU
Accessories:
Quantity
4PCS
2PCS
Please note
IP66 protection will be lost, and all corresponding guarantees will become null and void, if mounting brackets
are removed or tampered with.
Extraordinary operating conditions, such as heavy icing or exceptional dynamic stress (e.g. strain caused by
oscillating support structures), may result in the breakage of a mast mounted device or even cause it to fall to
the ground. The limits for the coupling torque of RF connectors, recommended by the connector
manufacturers must be obeyed. Terminate unused inputs with a suitable 50- load.
2