Emetteur : DGALOYER Date : 12/11/03 Serveur /conversion/tmp/activity_task_scratch/30055753.doc
Modifié par : Date : 02/11/21 M/C N° : Page 1 sur 9 10.Push Softkey YES
11.Push 2x left Softkey to get the next picture
Emetteur : DGALOYER Date : 12/11/03 Serveur /conversion/tmp/activity_task_scratch/30055753.doc
Modifié par : Date : 02/11/21 M/C N° : Page 2 sur 9 12.Push Softkey I/O
13.Push Softkey MCARD
14.Push Softkey WRITE 15.Push Softkey LADDER 16.Write the name for the PLC-Software (Chiron use the name of Software) f.e. @T042-11.LAD
(Name must start with @) (Only 7 letters maximum)(Only 3 letters maximum)
17.Press INPUT Button
18.Push Softkey EXEC
Emetteur : DGALOYER Date : 12/11/03 Serveur /conversion/tmp/activity_task_scratch/30055753.doc
Modifié par : Date : 02/11/21 M/C N° : Page 3 sur 9 19.When Complete is shown , PLC Software is saved on Memorycard
20.Press Up arrow to DATA KIND
21.Push Softkey PARAM
22.Write the name for the PLC-Parameters (Chiron use machine no.) f.e. @462-24.PRM
(Name must start with @) (Only 7 letters maximum)(Only 3 letters maximum)
Emetteur : DGALOYER Date : 12/11/03 Serveur /conversion/tmp/activity_task_scratch/30055753.doc
Modifié par : Date : 02/11/21 M/C N° : Page 4 sur 9 23.Press INPUT Button 24.Press EDIT Button 25.Push Softkey EXEC 26.When Complete is shown , PLC Software is saved on Memorycard
Control the content of the Memorycard
27.Push Softkey CANCEL 28.Push Softkey MCARD 29.Push Softkey LIST
30.Push Softkey EXEC List of the Memorycard is show
31.Look for your name if they are existing.
f.e. T042-11.LAD 462-24.PRM
Emetteur : DGALOYER Date : 12/11/03 Serveur /conversion/tmp/activity_task_scratch/30055753.doc
Modifié par : Date : 02/11/21 M/C N° : Page 5 sur 9 Loading new Software to the machine 32.The Software should be on the Memorycard f.e. T042-11.16T 33.Look for the Number and write or remember it for the next steps 34.Push Softkey CANCEL 35.!!!!!! Press EMERGENCY BUTTON !!!!!! 36.Press MDI Button 37.Push Softkey MCARD 38.Push Softkey READ 39.Put in the number you have to remember f.e. 13 40.Press INPUT Button 41.Push Softkey EXEC
42.When Complete is shown , PLC Software is on machine in D-RAM
Emetteur : DGALOYER Date : 12/11/03 Serveur /conversion/tmp/activity_task_scratch/30055753.doc
Modifié par : Date : 02/11/21 M/C N° : Page 6 sur 9 43.Move with the up arrow to DEVICE = MCARD
44.Push Softkey FROM
45.Push Softkey WRITE 46.Push Softkey EXEC
47.When Complete is shown , PLC Software is on machine in F-ROM
Emetteur : DGALOYER Date : 12/11/03 Serveur /conversion/tmp/activity_task_scratch/30055753.doc
Modifié par : Date : 02/11/21 M/C N° : Page 7 sur 9 48.The machine is not running because the Computer is stopped. To start the Computer see next steps. 49.Push the left Softkey to get the next picture
50.Push Softkey RUN
51. After pushing the Softkey RUN the display changes to RUN
Emetteur : DGALOYER Date : 12/11/03 Serveur /conversion/tmp/activity_task_scratch/30055753.doc
Modifié par : Date : 02/11/21 M/C N° : Page 8 sur 9 52.For to set the security again push Softkey PMCPRM 53.Push Softkey SETING 54.Push Softkey NO
Emetteur : DGALOYER Date : 12/11/03 Serveur /conversion/tmp/activity_task_scratch/30055753.doc
Modifié par : Date : 02/11/21 M/C N° : Page 9 sur 9