FLOWBACK “P” TANK
PRODUCTION TESTING
* Onshore flowback and well testing
+ Well clean-up operations
» Drill out emissions control
+ Extended productions tests
+ Designed to ASME pressure vessel code
specifications
+ Four phase design
+ 340 bb | capacity
+ Incorporates Baker type bypass
YA packages on each unit for
jocumentation
Robust design with clean - out man - way
Eee eee
~ Kimray, BPV 4: #150412 FGT
+ Kimray, mechanical type liquid dumps
+ Sight glasses in each phase
+ Farris model #3800 4”x6” #150 modulating
relict valve and secondary 4" #130 burst
+ Vane type mist extractor
Vortex breaker on all fuid discharge nozzles
Wave & baffle internal assist with fluid and
solids separation
* Heating cols internal to vessel toal length
Soa eee
+» Four 2” drains
* Solids discharge 3”, quantity four
+ Man way's 24” #150 total of four
* 4° oil discharge
+ 4” water discharge
One 4 Phase “P” Yank provides a multiple use large
ASME code pressure tank that is in its versatility becomes a drill out
tank, to control emissions, a flowback secondary stage to control
emissions and remove live effluent to a controled environment that
sends gases to a disposal point and effluent to storage tanks.
‘This “P” tank sits on a Frac tank dimensional trailer frame and is easy
to move from site to site with 4Working Pressure
psi
Length S/S
ft
Ink
in
Connection Type
Inlet
Gas Capacity Maximum
MMSCFD
Liquid Capacity
bbi/sd
Design Temperature
Liquid Measurement
Weight on Trailer
Ibs
CTEST.COM
100
90
38
3" 1502
3" 206
22
36,000
-20/+120
No Metering
No Metering
35,300
‘Copyright @ 2014 Covenant Testing Technologies, LLC. All rights reserved.
230
71.625
20
4
3° /602
#150 RF
206
18
32,000
-20/+120
Simplex 4” Duel
Complete Bypass
EZ-In Turbine
Meters
Eevee ae