Beruflich Dokumente
Kultur Dokumente
2- Site Maadi_Khabiri2 & site Basatin_center types are DBS3800, their radios (RRU)
are 40watt capable radios, noticeable increase in their RTWP synchronized with
2nd carrier activation.
12-Dec-2010
Page 2
3- Site DCS_Sakanat_EL_Maadi is DBS3800, its radios (RRU) are 60watt radios, and
its RTWP havent any change after adding the 2nd carrier cell.
12-Dec-2010
Page 3
Cause Analysis:
As there is no RTWP increase in site DCS_SAKANAT_EL_Maadi which its RRUs are
60watt, we have to isolate whether 40watt capable radios are the only affected when it carries 2
carriers, we can go for below actions:
1- Adding another MTRU+MAFU in the first sector of site N_Maadi_2 and to carry F2 of the
first sector, by this way MTRU0+MAFU0 will carry F1 of first sector and MTRU1+MAFU1
will carry F2 of same sector
2- Expand another site with 60Watt radio and monitor its RTWP.
3- Replace 40watt RRU with 60watt RRU in one of the affected sites ex: Maadi_khabiri2
and monitor the RTWP
Root Cause:
12-Dec-2010
Page 4
12-Dec-2010
Page 5
Huawei Feedback:
Please find the below feedbacks to the RTWP of 2nd carrier.
The slight increase of the RTWP is due to the change of reference frequency point after
introducing the 2nd carrier. However, it will not bring any affect on the sites performance or
KPIs.
The NodeB calculate the RTWP as follow:
RTWP = measured signal power after the power amplifier power amplifier gain +
compensation value
Here:
The power amplifier gain is the UL branch gain mentioned in the above tablel.
The compensation value depends on the reference frequency point, when there is only one
carrier; the reference frequency point is 9662 which is the center frequency point of this
carrier. After adding the 2nd carrier,
the reference point change to the center frequency of the 2 carriers, which is 9674.5. So the
compensation value changes with the reference frequency point.
Why we add the compensation value?
There is no power amplifier without imperfection, so we need to add this value to compensate
the minor error from the amplifier.
12-Dec-2010
Page 6
12-Dec-2010
Page 7