Sie sind auf Seite 1von 6

Two types of hydrobox are supplied by Mitsubishi Electric depending on

desired hot water application:


1- Booster unit: Ideal for use in a variety of applications. From hotels to
restaurants to gyms, it works perfectly in providing optimum air environment
and hot water to a maximum of 70C.
The booster unit is connectable only to a VRF heat recovery outdoor unit
(Mitsubishi Electric City Multi R2 series).
System Outline:
The Booster unit is connected to a BC controller with refrigerant pipes, and to
the water tank with water pipes. The waste heat from cooling operation is
utilized for heating operation which provides hot water.

Noting that the Mitsubishi Electric City Multi R2 heat recovery system is the
only two-pipe simultaneous heating and cooling system in the world.

Booster Unit Model and Specification:

Example of water pipe installation:

1- HEX unit: HEX unit works perfectly to provide heating and cooling to
water fan coil units, panel heaters, or under floor heating systems, it offers
45C in heating and down to 8C in cooling, making it suitable for residential
properties.
The HEX unit is connectable to a VRF heat pump unit (Mitsubishi Electric
City Multi Y series) and also connectable to a VRF heat recovery outdoor
unit (Mitsubishi Electric City Multi R2 series).
System outline with Y series:
HEX unit is connected to Y outdoor with refrigerant pipes and to the water
tank with water pipes. HEX unit is not equipped with compressor.

HEX Unit Models and Specification:

Das könnte Ihnen auch gefallen