9.13 The members 1 and 2 of Figure 9.21 are circular with diameters of 1 and 2 in.,
respectively. Determine the displacement of fiode P by assuming the joints to be
pin connected
P= 100 Ib
Member 1
10”
Member 2
po
E=30x 10° psi
Figure 9.21.9.15 The stepped bar shown in Figure 9.22 is subjected to an axial load of 100 Ib at
node 2. The Young's moduli of elements 1, 2, and 3 are given by 30x 10°, 20> 10°,
and 10 x 10° psi. respectively. If the cross-sectional areas of elements 1, 2, and 3
are given by 3 x 3.2% 2. and 1 x 1 in., respectively. determine the following:
(a) Displacements of nodes 2 and 3.
(b) Stresses in elements 1. 2. and 3.
(c) Reactions at nodes 1 and 4
Element 1 Element 2 Element 3
Figure 9.22
9.17 The stepped bar shown in Figure 9.21 is heated by 100°F, The cross-sectional
areas of elements 1 and 2 are given by 2 and 1 in.” and the Young's moduli by
30 x 10° and 20 x 10° psi, respectively
(a) Derive the stiffness matrices and the load vectors of the two elements.
(b) Derive the assembled equilibrium equations of the system and find the
displacement of node C.
(c) Find the stresses induced in elements 1 and 2.
Assume the value of a for elements I and 2 to be 15 x 10~® and 10x 10-° per °F
respectively,
Element 1
Element 2
ee
-— » ——+—__ 0”
Figure 9.24.